| 1 |
/****************************************************************************** |
| 2 |
* |
| 3 |
* This file is provided under a dual BSD/GPLv2 license. When using or |
| 4 |
* redistributing this file, you may do so under either license. |
| 5 |
* |
| 6 |
* GPL LICENSE SUMMARY |
| 7 |
* |
| 8 |
* Copyright(c) 2005 - 2011 Intel Corporation. All rights reserved. |
| 9 |
* |
| 10 |
* This program is free software; you can redistribute it and/or modify |
| 11 |
* it under the terms of version 2 of the GNU General Public License as |
| 12 |
* published by the Free Software Foundation. |
| 13 |
* |
| 14 |
* This program is distributed in the hope that it will be useful, but |
| 15 |
* WITHOUT ANY WARRANTY; without even the implied warranty of |
| 16 |
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| 17 |
* General Public License for more details. |
| 18 |
* |
| 19 |
* You should have received a copy of the GNU General Public License |
| 20 |
* along with this program; if not, write to the Free Software |
| 21 |
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, |
| 22 |
* USA |
| 23 |
* |
| 24 |
* The full GNU General Public License is included in this distribution |
| 25 |
* in the file called LICENSE.GPL. |
| 26 |
* |
| 27 |
* Contact Information: |
| 28 |
* Intel Linux Wireless <[email protected]> |
| 29 |
* Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 |
| 30 |
* |
| 31 |
* BSD LICENSE |
| 32 |
* |
| 33 |
* Copyright(c) 2005 - 2011 Intel Corporation. All rights reserved. |
| 34 |
* All rights reserved. |
| 35 |
* |
| 36 |
* Redistribution and use in source and binary forms, with or without |
| 37 |
* modification, are permitted provided that the following conditions |
| 38 |
* are met: |
| 39 |
* |
| 40 |
* * Redistributions of source code must retain the above copyright |
| 41 |
* notice, this list of conditions and the following disclaimer. |
| 42 |
* * Redistributions in binary form must reproduce the above copyright |
| 43 |
* notice, this list of conditions and the following disclaimer in |
| 44 |
* the documentation and/or other materials provided with the |
| 45 |
* distribution. |
| 46 |
* * Neither the name Intel Corporation nor the names of its |
| 47 |
* contributors may be used to endorse or promote products derived |
| 48 |
* from this software without specific prior written permission. |
| 49 |
* |
| 50 |
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| 51 |
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| 52 |
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| 53 |
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| 54 |
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| 55 |
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| 56 |
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| 57 |
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| 58 |
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| 59 |
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| 60 |
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| 61 |
* |
| 62 |
*****************************************************************************/ |
| 63 |
#ifndef __il_csr_h__ |
| 64 |
#define __il_csr_h__ |
| 65 |
/* |
| 66 |
* CSR (control and status registers) |
| 67 |
* |
| 68 |
* CSR registers are mapped directly into PCI bus space, and are accessible |
| 69 |
* whenever platform supplies power to device, even when device is in |
| 70 |
* low power states due to driver-invoked device resets |
| 71 |
* (e.g. CSR_RESET_REG_FLAG_SW_RESET) or uCode-driven power-saving modes. |
| 72 |
* |
| 73 |
* Use _il_wr() and _il_rd() family to access these registers; |
| 74 |
* these provide simple PCI bus access, without waking up the MAC. |
| 75 |
* Do not use il_wr() family for these registers; |
| 76 |
* no need to "grab nic access" via CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ. |
| 77 |
* The MAC (uCode processor, etc.) does not need to be powered up for accessing |
| 78 |
* the CSR registers. |
| 79 |
* |
| 80 |
* NOTE: Device does need to be awake in order to read this memory |
| 81 |
* via CSR_EEPROM register |
| 82 |
*/ |
| 83 |
#define CSR_BASE (0x000) |
| 84 |
|
| 85 |
#define CSR_HW_IF_CONFIG_REG (CSR_BASE+0x000) /* hardware interface config */ |
| 86 |
#define CSR_INT_COALESCING (CSR_BASE+0x004) /* accum ints, 32-usec units */ |
| 87 |
#define CSR_INT (CSR_BASE+0x008) /* host interrupt status/ack */ |
| 88 |
#define CSR_INT_MASK (CSR_BASE+0x00c) /* host interrupt enable */ |
| 89 |
#define CSR_FH_INT_STATUS (CSR_BASE+0x010) /* busmaster int status/ack */ |
| 90 |
#define CSR_GPIO_IN (CSR_BASE+0x018) /* read external chip pins */ |
| 91 |
#define CSR_RESET (CSR_BASE+0x020) /* busmaster enable, NMI, etc */ |
| 92 |
#define CSR_GP_CNTRL (CSR_BASE+0x024) |
| 93 |
|
| 94 |
/* 2nd byte of CSR_INT_COALESCING, not accessible via _il_wr()! */ |
| 95 |
#define CSR_INT_PERIODIC_REG (CSR_BASE+0x005) |
| 96 |
|
| 97 |
/* |
| 98 |
* Hardware revision info |
| 99 |
* Bit fields: |
| 100 |
* 31-8: Reserved |
| 101 |
* 7-4: Type of device: see CSR_HW_REV_TYPE_xxx definitions |
| 102 |
* 3-2: Revision step: 0 = A, 1 = B, 2 = C, 3 = D |
| 103 |
* 1-0: "Dash" (-) value, as in A-1, etc. |
| 104 |
* |
| 105 |
* NOTE: Revision step affects calculation of CCK txpower for 4965. |
| 106 |
* NOTE: See also CSR_HW_REV_WA_REG (work-around for bug in 4965). |
| 107 |
*/ |
| 108 |
#define CSR_HW_REV (CSR_BASE+0x028) |
| 109 |
|
| 110 |
/* |
| 111 |
* EEPROM memory reads |
| 112 |
* |
| 113 |
* NOTE: Device must be awake, initialized via apm_ops.init(), |
| 114 |
* in order to read. |
| 115 |
*/ |
| 116 |
#define CSR_EEPROM_REG (CSR_BASE+0x02c) |
| 117 |
#define CSR_EEPROM_GP (CSR_BASE+0x030) |
| 118 |
|
| 119 |
#define CSR_GIO_REG (CSR_BASE+0x03C) |
| 120 |
#define CSR_GP_UCODE_REG (CSR_BASE+0x048) |
| 121 |
#define CSR_GP_DRIVER_REG (CSR_BASE+0x050) |
| 122 |
|
| 123 |
/* |
| 124 |
* UCODE-DRIVER GP (general purpose) mailbox registers. |
| 125 |
* SET/CLR registers set/clear bit(s) if "1" is written. |
| 126 |
*/ |
| 127 |
#define CSR_UCODE_DRV_GP1 (CSR_BASE+0x054) |
| 128 |
#define CSR_UCODE_DRV_GP1_SET (CSR_BASE+0x058) |
| 129 |
#define CSR_UCODE_DRV_GP1_CLR (CSR_BASE+0x05c) |
| 130 |
#define CSR_UCODE_DRV_GP2 (CSR_BASE+0x060) |
| 131 |
|
| 132 |
#define CSR_LED_REG (CSR_BASE+0x094) |
| 133 |
#define CSR_DRAM_INT_TBL_REG (CSR_BASE+0x0A0) |
| 134 |
|
| 135 |
/* GIO Chicken Bits (PCI Express bus link power management) */ |
| 136 |
#define CSR_GIO_CHICKEN_BITS (CSR_BASE+0x100) |
| 137 |
|
| 138 |
/* Analog phase-lock-loop configuration */ |
| 139 |
#define CSR_ANA_PLL_CFG (CSR_BASE+0x20c) |
| 140 |
|
| 141 |
/* |
| 142 |
* CSR Hardware Revision Workaround Register. Indicates hardware rev; |
| 143 |
* "step" determines CCK backoff for txpower calculation. Used for 4965 only. |
| 144 |
* See also CSR_HW_REV register. |
| 145 |
* Bit fields: |
| 146 |
* 3-2: 0 = A, 1 = B, 2 = C, 3 = D step |
| 147 |
* 1-0: "Dash" (-) value, as in C-1, etc. |
| 148 |
*/ |
| 149 |
#define CSR_HW_REV_WA_REG (CSR_BASE+0x22C) |
| 150 |
|
| 151 |
#define CSR_DBG_HPET_MEM_REG (CSR_BASE+0x240) |
| 152 |
#define CSR_DBG_LINK_PWR_MGMT_REG (CSR_BASE+0x250) |
| 153 |
|
| 154 |
/* Bits for CSR_HW_IF_CONFIG_REG */ |
| 155 |
#define CSR49_HW_IF_CONFIG_REG_BIT_4965_R (0x00000010) |
| 156 |
#define CSR_HW_IF_CONFIG_REG_MSK_BOARD_VER (0x00000C00) |
| 157 |
#define CSR_HW_IF_CONFIG_REG_BIT_MAC_SI (0x00000100) |
| 158 |
#define CSR_HW_IF_CONFIG_REG_BIT_RADIO_SI (0x00000200) |
| 159 |
|
| 160 |
#define CSR39_HW_IF_CONFIG_REG_BIT_3945_MB (0x00000100) |
| 161 |
#define CSR39_HW_IF_CONFIG_REG_BIT_3945_MM (0x00000200) |
| 162 |
#define CSR39_HW_IF_CONFIG_REG_BIT_SKU_MRC (0x00000400) |
| 163 |
#define CSR39_HW_IF_CONFIG_REG_BIT_BOARD_TYPE (0x00000800) |
| 164 |
#define CSR39_HW_IF_CONFIG_REG_BITS_SILICON_TYPE_A (0x00000000) |
| 165 |
#define CSR39_HW_IF_CONFIG_REG_BITS_SILICON_TYPE_B (0x00001000) |
| 166 |
|
| 167 |
#define CSR_HW_IF_CONFIG_REG_BIT_HAP_WAKE_L1A (0x00080000) |
| 168 |
#define CSR_HW_IF_CONFIG_REG_BIT_EEPROM_OWN_SEM (0x00200000) |
| 169 |
#define CSR_HW_IF_CONFIG_REG_BIT_NIC_READY (0x00400000) /* PCI_OWN_SEM */ |
| 170 |
#define CSR_HW_IF_CONFIG_REG_BIT_NIC_PREPARE_DONE (0x02000000) /* ME_OWN */ |
| 171 |
#define CSR_HW_IF_CONFIG_REG_PREPARE (0x08000000) /* WAKE_ME */ |
| 172 |
|
| 173 |
#define CSR_INT_PERIODIC_DIS (0x00) /* disable periodic int */ |
| 174 |
#define CSR_INT_PERIODIC_ENA (0xFF) /* 255*32 usec ~ 8 msec */ |
| 175 |
|
| 176 |
/* interrupt flags in INTA, set by uCode or hardware (e.g. dma), |
| 177 |
* acknowledged (reset) by host writing "1" to flagged bits. */ |
| 178 |
#define CSR_INT_BIT_FH_RX (1 << 31) /* Rx DMA, cmd responses, FH_INT[17:16] */ |
| 179 |
#define CSR_INT_BIT_HW_ERR (1 << 29) /* DMA hardware error FH_INT[31] */ |
| 180 |
#define CSR_INT_BIT_RX_PERIODIC (1 << 28) /* Rx periodic */ |
| 181 |
#define CSR_INT_BIT_FH_TX (1 << 27) /* Tx DMA FH_INT[1:0] */ |
| 182 |
#define CSR_INT_BIT_SCD (1 << 26) /* TXQ pointer advanced */ |
| 183 |
#define CSR_INT_BIT_SW_ERR (1 << 25) /* uCode error */ |
| 184 |
#define CSR_INT_BIT_RF_KILL (1 << 7) /* HW RFKILL switch GP_CNTRL[27] toggled */ |
| 185 |
#define CSR_INT_BIT_CT_KILL (1 << 6) /* Critical temp (chip too hot) rfkill */ |
| 186 |
#define CSR_INT_BIT_SW_RX (1 << 3) /* Rx, command responses, 3945 */ |
| 187 |
#define CSR_INT_BIT_WAKEUP (1 << 1) /* NIC controller waking up (pwr mgmt) */ |
| 188 |
#define CSR_INT_BIT_ALIVE (1 << 0) /* uCode interrupts once it initializes */ |
| 189 |
|
| 190 |
#define CSR_INI_SET_MASK (CSR_INT_BIT_FH_RX | \ |
| 191 |
CSR_INT_BIT_HW_ERR | \ |
| 192 |
CSR_INT_BIT_FH_TX | \ |
| 193 |
CSR_INT_BIT_SW_ERR | \ |
| 194 |
CSR_INT_BIT_RF_KILL | \ |
| 195 |
CSR_INT_BIT_SW_RX | \ |
| 196 |
CSR_INT_BIT_WAKEUP | \ |
| 197 |
CSR_INT_BIT_ALIVE) |
| 198 |
|
| 199 |
/* interrupt flags in FH (flow handler) (PCI busmaster DMA) */ |
| 200 |
#define CSR_FH_INT_BIT_ERR (1 << 31) /* Error */ |
| 201 |
#define CSR_FH_INT_BIT_HI_PRIOR (1 << 30) /* High priority Rx, bypass coalescing */ |
| 202 |
#define CSR39_FH_INT_BIT_RX_CHNL2 (1 << 18) /* Rx channel 2 (3945 only) */ |
| 203 |
#define CSR_FH_INT_BIT_RX_CHNL1 (1 << 17) /* Rx channel 1 */ |
| 204 |
#define CSR_FH_INT_BIT_RX_CHNL0 (1 << 16) /* Rx channel 0 */ |
| 205 |
#define CSR39_FH_INT_BIT_TX_CHNL6 (1 << 6) /* Tx channel 6 (3945 only) */ |
| 206 |
#define CSR_FH_INT_BIT_TX_CHNL1 (1 << 1) /* Tx channel 1 */ |
| 207 |
#define CSR_FH_INT_BIT_TX_CHNL0 (1 << 0) /* Tx channel 0 */ |
| 208 |
|
| 209 |
#define CSR39_FH_INT_RX_MASK (CSR_FH_INT_BIT_HI_PRIOR | \ |
| 210 |
CSR39_FH_INT_BIT_RX_CHNL2 | \ |
| 211 |
CSR_FH_INT_BIT_RX_CHNL1 | \ |
| 212 |
CSR_FH_INT_BIT_RX_CHNL0) |
| 213 |
|
| 214 |
#define CSR39_FH_INT_TX_MASK (CSR39_FH_INT_BIT_TX_CHNL6 | \ |
| 215 |
CSR_FH_INT_BIT_TX_CHNL1 | \ |
| 216 |
CSR_FH_INT_BIT_TX_CHNL0) |
| 217 |
|
| 218 |
#define CSR49_FH_INT_RX_MASK (CSR_FH_INT_BIT_HI_PRIOR | \ |
| 219 |
CSR_FH_INT_BIT_RX_CHNL1 | \ |
| 220 |
CSR_FH_INT_BIT_RX_CHNL0) |
| 221 |
|
| 222 |
#define CSR49_FH_INT_TX_MASK (CSR_FH_INT_BIT_TX_CHNL1 | \ |
| 223 |
CSR_FH_INT_BIT_TX_CHNL0) |
| 224 |
|
| 225 |
/* GPIO */ |
| 226 |
#define CSR_GPIO_IN_BIT_AUX_POWER (0x00000200) |
| 227 |
#define CSR_GPIO_IN_VAL_VAUX_PWR_SRC (0x00000000) |
| 228 |
#define CSR_GPIO_IN_VAL_VMAIN_PWR_SRC (0x00000200) |
| 229 |
|
| 230 |
/* RESET */ |
| 231 |
#define CSR_RESET_REG_FLAG_NEVO_RESET (0x00000001) |
| 232 |
#define CSR_RESET_REG_FLAG_FORCE_NMI (0x00000002) |
| 233 |
#define CSR_RESET_REG_FLAG_SW_RESET (0x00000080) |
| 234 |
#define CSR_RESET_REG_FLAG_MASTER_DISABLED (0x00000100) |
| 235 |
#define CSR_RESET_REG_FLAG_STOP_MASTER (0x00000200) |
| 236 |
#define CSR_RESET_LINK_PWR_MGMT_DISABLED (0x80000000) |
| 237 |
|
| 238 |
/* |
| 239 |
* GP (general purpose) CONTROL REGISTER |
| 240 |
* Bit fields: |
| 241 |
* 27: HW_RF_KILL_SW |
| 242 |
* Indicates state of (platform's) hardware RF-Kill switch |
| 243 |
* 26-24: POWER_SAVE_TYPE |
| 244 |
* Indicates current power-saving mode: |
| 245 |
* 000 -- No power saving |
| 246 |
* 001 -- MAC power-down |
| 247 |
* 010 -- PHY (radio) power-down |
| 248 |
* 011 -- Error |
| 249 |
* 9-6: SYS_CONFIG |
| 250 |
* Indicates current system configuration, reflecting pins on chip |
| 251 |
* as forced high/low by device circuit board. |
| 252 |
* 4: GOING_TO_SLEEP |
| 253 |
* Indicates MAC is entering a power-saving sleep power-down. |
| 254 |
* Not a good time to access device-internal resources. |
| 255 |
* 3: MAC_ACCESS_REQ |
| 256 |
* Host sets this to request and maintain MAC wakeup, to allow host |
| 257 |
* access to device-internal resources. Host must wait for |
| 258 |
* MAC_CLOCK_READY (and !GOING_TO_SLEEP) before accessing non-CSR |
| 259 |
* device registers. |
| 260 |
* 2: INIT_DONE |
| 261 |
* Host sets this to put device into fully operational D0 power mode. |
| 262 |
* Host resets this after SW_RESET to put device into low power mode. |
| 263 |
* 0: MAC_CLOCK_READY |
| 264 |
* Indicates MAC (ucode processor, etc.) is powered up and can run. |
| 265 |
* Internal resources are accessible. |
| 266 |
* NOTE: This does not indicate that the processor is actually running. |
| 267 |
* NOTE: This does not indicate that 4965 or 3945 has completed |
| 268 |
* init or post-power-down restore of internal SRAM memory. |
| 269 |
* Use CSR_UCODE_DRV_GP1_BIT_MAC_SLEEP as indication that |
| 270 |
* SRAM is restored and uCode is in normal operation mode. |
| 271 |
* Later devices (5xxx/6xxx/1xxx) use non-volatile SRAM, and |
| 272 |
* do not need to save/restore it. |
| 273 |
* NOTE: After device reset, this bit remains "0" until host sets |
| 274 |
* INIT_DONE |
| 275 |
*/ |
| 276 |
#define CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY (0x00000001) |
| 277 |
#define CSR_GP_CNTRL_REG_FLAG_INIT_DONE (0x00000004) |
| 278 |
#define CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ (0x00000008) |
| 279 |
#define CSR_GP_CNTRL_REG_FLAG_GOING_TO_SLEEP (0x00000010) |
| 280 |
|
| 281 |
#define CSR_GP_CNTRL_REG_VAL_MAC_ACCESS_EN (0x00000001) |
| 282 |
|
| 283 |
#define CSR_GP_CNTRL_REG_MSK_POWER_SAVE_TYPE (0x07000000) |
| 284 |
#define CSR_GP_CNTRL_REG_FLAG_MAC_POWER_SAVE (0x04000000) |
| 285 |
#define CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW (0x08000000) |
| 286 |
|
| 287 |
/* EEPROM REG */ |
| 288 |
#define CSR_EEPROM_REG_READ_VALID_MSK (0x00000001) |
| 289 |
#define CSR_EEPROM_REG_BIT_CMD (0x00000002) |
| 290 |
#define CSR_EEPROM_REG_MSK_ADDR (0x0000FFFC) |
| 291 |
#define CSR_EEPROM_REG_MSK_DATA (0xFFFF0000) |
| 292 |
|
| 293 |
/* EEPROM GP */ |
| 294 |
#define CSR_EEPROM_GP_VALID_MSK (0x00000007) /* signature */ |
| 295 |
#define CSR_EEPROM_GP_IF_OWNER_MSK (0x00000180) |
| 296 |
#define CSR_EEPROM_GP_GOOD_SIG_EEP_LESS_THAN_4K (0x00000002) |
| 297 |
#define CSR_EEPROM_GP_GOOD_SIG_EEP_MORE_THAN_4K (0x00000004) |
| 298 |
|
| 299 |
/* GP REG */ |
| 300 |
#define CSR_GP_REG_POWER_SAVE_STATUS_MSK (0x03000000) /* bit 24/25 */ |
| 301 |
#define CSR_GP_REG_NO_POWER_SAVE (0x00000000) |
| 302 |
#define CSR_GP_REG_MAC_POWER_SAVE (0x01000000) |
| 303 |
#define CSR_GP_REG_PHY_POWER_SAVE (0x02000000) |
| 304 |
#define CSR_GP_REG_POWER_SAVE_ERROR (0x03000000) |
| 305 |
|
| 306 |
/* CSR GIO */ |
| 307 |
#define CSR_GIO_REG_VAL_L0S_ENABLED (0x00000002) |
| 308 |
|
| 309 |
/* |
| 310 |
* UCODE-DRIVER GP (general purpose) mailbox register 1 |
| 311 |
* Host driver and uCode write and/or read this register to communicate with |
| 312 |
* each other. |
| 313 |
* Bit fields: |
| 314 |
* 4: UCODE_DISABLE |
| 315 |
* Host sets this to request permanent halt of uCode, same as |
| 316 |
* sending CARD_STATE command with "halt" bit set. |
| 317 |
* 3: CT_KILL_EXIT |
| 318 |
* Host sets this to request exit from CT_KILL state, i.e. host thinks |
| 319 |
* device temperature is low enough to continue normal operation. |
| 320 |
* 2: CMD_BLOCKED |
| 321 |
* Host sets this during RF KILL power-down sequence (HW, SW, CT KILL) |
| 322 |
* to release uCode to clear all Tx and command queues, enter |
| 323 |
* unassociated mode, and power down. |
| 324 |
* NOTE: Some devices also use HBUS_TARG_MBX_C register for this bit. |
| 325 |
* 1: SW_BIT_RFKILL |
| 326 |
* Host sets this when issuing CARD_STATE command to request |
| 327 |
* device sleep. |
| 328 |
* 0: MAC_SLEEP |
| 329 |
* uCode sets this when preparing a power-saving power-down. |
| 330 |
* uCode resets this when power-up is complete and SRAM is sane. |
| 331 |
* NOTE: 3945/4965 saves internal SRAM data to host when powering down, |
| 332 |
* and must restore this data after powering back up. |
| 333 |
* MAC_SLEEP is the best indication that restore is complete. |
| 334 |
* Later devices (5xxx/6xxx/1xxx) use non-volatile SRAM, and |
| 335 |
* do not need to save/restore it. |
| 336 |
*/ |
| 337 |
#define CSR_UCODE_DRV_GP1_BIT_MAC_SLEEP (0x00000001) |
| 338 |
#define CSR_UCODE_SW_BIT_RFKILL (0x00000002) |
| 339 |
#define CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED (0x00000004) |
| 340 |
#define CSR_UCODE_DRV_GP1_REG_BIT_CT_KILL_EXIT (0x00000008) |
| 341 |
|
| 342 |
/* GIO Chicken Bits (PCI Express bus link power management) */ |
| 343 |
#define CSR_GIO_CHICKEN_BITS_REG_BIT_L1A_NO_L0S_RX (0x00800000) |
| 344 |
#define CSR_GIO_CHICKEN_BITS_REG_BIT_DIS_L0S_EXIT_TIMER (0x20000000) |
| 345 |
|
| 346 |
/* LED */ |
| 347 |
#define CSR_LED_BSM_CTRL_MSK (0xFFFFFFDF) |
| 348 |
#define CSR_LED_REG_TRUN_ON (0x78) |
| 349 |
#define CSR_LED_REG_TRUN_OFF (0x38) |
| 350 |
|
| 351 |
/* ANA_PLL */ |
| 352 |
#define CSR39_ANA_PLL_CFG_VAL (0x01000000) |
| 353 |
|
| 354 |
/* HPET MEM debug */ |
| 355 |
#define CSR_DBG_HPET_MEM_REG_VAL (0xFFFF0000) |
| 356 |
|
| 357 |
/* DRAM INT TBL */ |
| 358 |
#define CSR_DRAM_INT_TBL_ENABLE (1 << 31) |
| 359 |
#define CSR_DRAM_INIT_TBL_WRAP_CHECK (1 << 27) |
| 360 |
|
| 361 |
/* |
| 362 |
* HBUS (Host-side Bus) |
| 363 |
* |
| 364 |
* HBUS registers are mapped directly into PCI bus space, but are used |
| 365 |
* to indirectly access device's internal memory or registers that |
| 366 |
* may be powered-down. |
| 367 |
* |
| 368 |
* Use il_wr()/il_rd() family |
| 369 |
* for these registers; |
| 370 |
* host must "grab nic access" via CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ |
| 371 |
* to make sure the MAC (uCode processor, etc.) is powered up for accessing |
| 372 |
* internal resources. |
| 373 |
* |
| 374 |
* Do not use _il_wr()/_il_rd() family to access these registers; |
| 375 |
* these provide only simple PCI bus access, without waking up the MAC. |
| 376 |
*/ |
| 377 |
#define HBUS_BASE (0x400) |
| 378 |
|
| 379 |
/* |
| 380 |
* Registers for accessing device's internal SRAM memory (e.g. SCD SRAM |
| 381 |
* structures, error log, event log, verifying uCode load). |
| 382 |
* First write to address register, then read from or write to data register |
| 383 |
* to complete the job. Once the address register is set up, accesses to |
| 384 |
* data registers auto-increment the address by one dword. |
| 385 |
* Bit usage for address registers (read or write): |
| 386 |
* 0-31: memory address within device |
| 387 |
*/ |
| 388 |
#define HBUS_TARG_MEM_RADDR (HBUS_BASE+0x00c) |
| 389 |
#define HBUS_TARG_MEM_WADDR (HBUS_BASE+0x010) |
| 390 |
#define HBUS_TARG_MEM_WDAT (HBUS_BASE+0x018) |
| 391 |
#define HBUS_TARG_MEM_RDAT (HBUS_BASE+0x01c) |
| 392 |
|
| 393 |
/* Mailbox C, used as workaround alternative to CSR_UCODE_DRV_GP1 mailbox */ |
| 394 |
#define HBUS_TARG_MBX_C (HBUS_BASE+0x030) |
| 395 |
#define HBUS_TARG_MBX_C_REG_BIT_CMD_BLOCKED (0x00000004) |
| 396 |
|
| 397 |
/* |
| 398 |
* Registers for accessing device's internal peripheral registers |
| 399 |
* (e.g. SCD, BSM, etc.). First write to address register, |
| 400 |
* then read from or write to data register to complete the job. |
| 401 |
* Bit usage for address registers (read or write): |
| 402 |
* 0-15: register address (offset) within device |
| 403 |
* 24-25: (# bytes - 1) to read or write (e.g. 3 for dword) |
| 404 |
*/ |
| 405 |
#define HBUS_TARG_PRPH_WADDR (HBUS_BASE+0x044) |
| 406 |
#define HBUS_TARG_PRPH_RADDR (HBUS_BASE+0x048) |
| 407 |
#define HBUS_TARG_PRPH_WDAT (HBUS_BASE+0x04c) |
| 408 |
#define HBUS_TARG_PRPH_RDAT (HBUS_BASE+0x050) |
| 409 |
|
| 410 |
/* |
| 411 |
* Per-Tx-queue write pointer (idx, really!) |
| 412 |
* Indicates idx to next TFD that driver will fill (1 past latest filled). |
| 413 |
* Bit usage: |
| 414 |
* 0-7: queue write idx |
| 415 |
* 11-8: queue selector |
| 416 |
*/ |
| 417 |
#define HBUS_TARG_WRPTR (HBUS_BASE+0x060) |
| 418 |
|
| 419 |
#endif /* !__il_csr_h__ */ |