| 1 |
// SPDX-License-Identifier: GPL-2.0-only |
| 2 |
/****************************************************************************** |
| 3 |
* |
| 4 |
* Copyright(c) 2003 - 2011 Intel Corporation. All rights reserved. |
| 5 |
* |
| 6 |
* Contact Information: |
| 7 |
* Intel Linux Wireless <[email protected]> |
| 8 |
* Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 |
| 9 |
* |
| 10 |
*****************************************************************************/ |
| 11 |
|
| 12 |
#include <linux/kernel.h> |
| 13 |
#include <linux/module.h> |
| 14 |
#include <linux/slab.h> |
| 15 |
#include <linux/pci.h> |
| 16 |
#include <linux/dma-mapping.h> |
| 17 |
#include <linux/delay.h> |
| 18 |
#include <linux/sched.h> |
| 19 |
#include <linux/skbuff.h> |
| 20 |
#include <linux/netdevice.h> |
| 21 |
#include <linux/firmware.h> |
| 22 |
#include <linux/etherdevice.h> |
| 23 |
#include <linux/unaligned.h> |
| 24 |
#include <net/mac80211.h> |
| 25 |
|
| 26 |
#include "common.h" |
| 27 |
#include "3945.h" |
| 28 |
|
| 29 |
/* Send led command */ |
| 30 |
static int |
| 31 |
il3945_send_led_cmd(struct il_priv *il, struct il_led_cmd *led_cmd) |
| 32 |
{ |
| 33 |
struct il_host_cmd cmd = { |
| 34 |
.id = C_LEDS, |
| 35 |
.len = sizeof(struct il_led_cmd), |
| 36 |
.data = led_cmd, |
| 37 |
.flags = CMD_ASYNC, |
| 38 |
.callback = NULL, |
| 39 |
}; |
| 40 |
|
| 41 |
return il_send_cmd(il, &cmd); |
| 42 |
} |
| 43 |
|
| 44 |
#define IL_DECLARE_RATE_INFO(r, ip, in, rp, rn, pp, np) \ |
| 45 |
[RATE_##r##M_IDX] = { RATE_##r##M_PLCP, \ |
| 46 |
RATE_##r##M_IEEE, \ |
| 47 |
RATE_##ip##M_IDX, \ |
| 48 |
RATE_##in##M_IDX, \ |
| 49 |
RATE_##rp##M_IDX, \ |
| 50 |
RATE_##rn##M_IDX, \ |
| 51 |
RATE_##pp##M_IDX, \ |
| 52 |
RATE_##np##M_IDX, \ |
| 53 |
RATE_##r##M_IDX_TBL, \ |
| 54 |
RATE_##ip##M_IDX_TBL } |
| 55 |
|
| 56 |
/* |
| 57 |
* Parameter order: |
| 58 |
* rate, prev rate, next rate, prev tgg rate, next tgg rate |
| 59 |
* |
| 60 |
* If there isn't a valid next or previous rate then INV is used which |
| 61 |
* maps to RATE_INVALID |
| 62 |
* |
| 63 |
*/ |
| 64 |
const struct il3945_rate_info il3945_rates[RATE_COUNT_3945] = { |
| 65 |
IL_DECLARE_RATE_INFO(1, INV, 2, INV, 2, INV, 2), /* 1mbps */ |
| 66 |
IL_DECLARE_RATE_INFO(2, 1, 5, 1, 5, 1, 5), /* 2mbps */ |
| 67 |
IL_DECLARE_RATE_INFO(5, 2, 6, 2, 11, 2, 11), /*5.5mbps */ |
| 68 |
IL_DECLARE_RATE_INFO(11, 9, 12, 5, 12, 5, 18), /* 11mbps */ |
| 69 |
IL_DECLARE_RATE_INFO(6, 5, 9, 5, 11, 5, 11), /* 6mbps */ |
| 70 |
IL_DECLARE_RATE_INFO(9, 6, 11, 5, 11, 5, 11), /* 9mbps */ |
| 71 |
IL_DECLARE_RATE_INFO(12, 11, 18, 11, 18, 11, 18), /* 12mbps */ |
| 72 |
IL_DECLARE_RATE_INFO(18, 12, 24, 12, 24, 11, 24), /* 18mbps */ |
| 73 |
IL_DECLARE_RATE_INFO(24, 18, 36, 18, 36, 18, 36), /* 24mbps */ |
| 74 |
IL_DECLARE_RATE_INFO(36, 24, 48, 24, 48, 24, 48), /* 36mbps */ |
| 75 |
IL_DECLARE_RATE_INFO(48, 36, 54, 36, 54, 36, 54), /* 48mbps */ |
| 76 |
IL_DECLARE_RATE_INFO(54, 48, INV, 48, INV, 48, INV), /* 54mbps */ |
| 77 |
}; |
| 78 |
|
| 79 |
static inline u8 |
| 80 |
il3945_get_prev_ieee_rate(u8 rate_idx) |
| 81 |
{ |
| 82 |
u8 rate = il3945_rates[rate_idx].prev_ieee; |
| 83 |
|
| 84 |
if (rate == RATE_INVALID) |
| 85 |
rate = rate_idx; |
| 86 |
return rate; |
| 87 |
} |
| 88 |
|
| 89 |
/* 1 = enable the il3945_disable_events() function */ |
| 90 |
#define IL_EVT_DISABLE (0) |
| 91 |
#define IL_EVT_DISABLE_SIZE (1532/32) |
| 92 |
|
| 93 |
/* |
| 94 |
* il3945_disable_events - Disable selected events in uCode event log |
| 95 |
* |
| 96 |
* Disable an event by writing "1"s into "disable" |
| 97 |
* bitmap in SRAM. Bit position corresponds to Event # (id/type). |
| 98 |
* Default values of 0 enable uCode events to be logged. |
| 99 |
* Use for only special debugging. This function is just a placeholder as-is, |
| 100 |
* you'll need to provide the special bits! ... |
| 101 |
* ... and set IL_EVT_DISABLE to 1. */ |
| 102 |
void |
| 103 |
il3945_disable_events(struct il_priv *il) |
| 104 |
{ |
| 105 |
int i; |
| 106 |
u32 base; /* SRAM address of event log header */ |
| 107 |
u32 disable_ptr; /* SRAM address of event-disable bitmap array */ |
| 108 |
u32 array_size; /* # of u32 entries in array */ |
| 109 |
static const u32 evt_disable[IL_EVT_DISABLE_SIZE] = { |
| 110 |
0x00000000, /* 31 - 0 Event id numbers */ |
| 111 |
0x00000000, /* 63 - 32 */ |
| 112 |
0x00000000, /* 95 - 64 */ |
| 113 |
0x00000000, /* 127 - 96 */ |
| 114 |
0x00000000, /* 159 - 128 */ |
| 115 |
0x00000000, /* 191 - 160 */ |
| 116 |
0x00000000, /* 223 - 192 */ |
| 117 |
0x00000000, /* 255 - 224 */ |
| 118 |
0x00000000, /* 287 - 256 */ |
| 119 |
0x00000000, /* 319 - 288 */ |
| 120 |
0x00000000, /* 351 - 320 */ |
| 121 |
0x00000000, /* 383 - 352 */ |
| 122 |
0x00000000, /* 415 - 384 */ |
| 123 |
0x00000000, /* 447 - 416 */ |
| 124 |
0x00000000, /* 479 - 448 */ |
| 125 |
0x00000000, /* 511 - 480 */ |
| 126 |
0x00000000, /* 543 - 512 */ |
| 127 |
0x00000000, /* 575 - 544 */ |
| 128 |
0x00000000, /* 607 - 576 */ |
| 129 |
0x00000000, /* 639 - 608 */ |
| 130 |
0x00000000, /* 671 - 640 */ |
| 131 |
0x00000000, /* 703 - 672 */ |
| 132 |
0x00000000, /* 735 - 704 */ |
| 133 |
0x00000000, /* 767 - 736 */ |
| 134 |
0x00000000, /* 799 - 768 */ |
| 135 |
0x00000000, /* 831 - 800 */ |
| 136 |
0x00000000, /* 863 - 832 */ |
| 137 |
0x00000000, /* 895 - 864 */ |
| 138 |
0x00000000, /* 927 - 896 */ |
| 139 |
0x00000000, /* 959 - 928 */ |
| 140 |
0x00000000, /* 991 - 960 */ |
| 141 |
0x00000000, /* 1023 - 992 */ |
| 142 |
0x00000000, /* 1055 - 1024 */ |
| 143 |
0x00000000, /* 1087 - 1056 */ |
| 144 |
0x00000000, /* 1119 - 1088 */ |
| 145 |
0x00000000, /* 1151 - 1120 */ |
| 146 |
0x00000000, /* 1183 - 1152 */ |
| 147 |
0x00000000, /* 1215 - 1184 */ |
| 148 |
0x00000000, /* 1247 - 1216 */ |
| 149 |
0x00000000, /* 1279 - 1248 */ |
| 150 |
0x00000000, /* 1311 - 1280 */ |
| 151 |
0x00000000, /* 1343 - 1312 */ |
| 152 |
0x00000000, /* 1375 - 1344 */ |
| 153 |
0x00000000, /* 1407 - 1376 */ |
| 154 |
0x00000000, /* 1439 - 1408 */ |
| 155 |
0x00000000, /* 1471 - 1440 */ |
| 156 |
0x00000000, /* 1503 - 1472 */ |
| 157 |
}; |
| 158 |
|
| 159 |
base = le32_to_cpu(il->card_alive.log_event_table_ptr); |
| 160 |
if (!il3945_hw_valid_rtc_data_addr(base)) { |
| 161 |
IL_ERR("Invalid event log pointer 0x%08X\n", base); |
| 162 |
return; |
| 163 |
} |
| 164 |
|
| 165 |
disable_ptr = il_read_targ_mem(il, base + (4 * sizeof(u32))); |
| 166 |
array_size = il_read_targ_mem(il, base + (5 * sizeof(u32))); |
| 167 |
|
| 168 |
if (IL_EVT_DISABLE && array_size == IL_EVT_DISABLE_SIZE) { |
| 169 |
D_INFO("Disabling selected uCode log events at 0x%x\n", |
| 170 |
disable_ptr); |
| 171 |
for (i = 0; i < IL_EVT_DISABLE_SIZE; i++) |
| 172 |
il_write_targ_mem(il, disable_ptr + (i * sizeof(u32)), |
| 173 |
evt_disable[i]); |
| 174 |
|
| 175 |
} else { |
| 176 |
D_INFO("Selected uCode log events may be disabled\n"); |
| 177 |
D_INFO(" by writing \"1\"s into disable bitmap\n"); |
| 178 |
D_INFO(" in SRAM at 0x%x, size %d u32s\n", disable_ptr, |
| 179 |
array_size); |
| 180 |
} |
| 181 |
|
| 182 |
} |
| 183 |
|
| 184 |
static int |
| 185 |
il3945_hwrate_to_plcp_idx(u8 plcp) |
| 186 |
{ |
| 187 |
int idx; |
| 188 |
|
| 189 |
for (idx = 0; idx < RATE_COUNT_3945; idx++) |
| 190 |
if (il3945_rates[idx].plcp == plcp) |
| 191 |
return idx; |
| 192 |
return -1; |
| 193 |
} |
| 194 |
|
| 195 |
#ifdef CONFIG_IWLEGACY_DEBUG |
| 196 |
#define TX_STATUS_ENTRY(x) case TX_3945_STATUS_FAIL_ ## x: return #x |
| 197 |
|
| 198 |
static const char * |
| 199 |
il3945_get_tx_fail_reason(u32 status) |
| 200 |
{ |
| 201 |
switch (status & TX_STATUS_MSK) { |
| 202 |
case TX_3945_STATUS_SUCCESS: |
| 203 |
return "SUCCESS"; |
| 204 |
TX_STATUS_ENTRY(SHORT_LIMIT); |
| 205 |
TX_STATUS_ENTRY(LONG_LIMIT); |
| 206 |
TX_STATUS_ENTRY(FIFO_UNDERRUN); |
| 207 |
TX_STATUS_ENTRY(MGMNT_ABORT); |
| 208 |
TX_STATUS_ENTRY(NEXT_FRAG); |
| 209 |
TX_STATUS_ENTRY(LIFE_EXPIRE); |
| 210 |
TX_STATUS_ENTRY(DEST_PS); |
| 211 |
TX_STATUS_ENTRY(ABORTED); |
| 212 |
TX_STATUS_ENTRY(BT_RETRY); |
| 213 |
TX_STATUS_ENTRY(STA_INVALID); |
| 214 |
TX_STATUS_ENTRY(FRAG_DROPPED); |
| 215 |
TX_STATUS_ENTRY(TID_DISABLE); |
| 216 |
TX_STATUS_ENTRY(FRAME_FLUSHED); |
| 217 |
TX_STATUS_ENTRY(INSUFFICIENT_CF_POLL); |
| 218 |
TX_STATUS_ENTRY(TX_LOCKED); |
| 219 |
TX_STATUS_ENTRY(NO_BEACON_ON_RADAR); |
| 220 |
} |
| 221 |
|
| 222 |
return "UNKNOWN"; |
| 223 |
} |
| 224 |
#else |
| 225 |
static inline const char * |
| 226 |
il3945_get_tx_fail_reason(u32 status) |
| 227 |
{ |
| 228 |
return ""; |
| 229 |
} |
| 230 |
#endif |
| 231 |
|
| 232 |
/* |
| 233 |
* get ieee prev rate from rate scale table. |
| 234 |
* for A and B mode we need to overright prev |
| 235 |
* value |
| 236 |
*/ |
| 237 |
int |
| 238 |
il3945_rs_next_rate(struct il_priv *il, int rate) |
| 239 |
{ |
| 240 |
int next_rate = il3945_get_prev_ieee_rate(rate); |
| 241 |
|
| 242 |
switch (il->band) { |
| 243 |
case NL80211_BAND_5GHZ: |
| 244 |
if (rate == RATE_12M_IDX) |
| 245 |
next_rate = RATE_9M_IDX; |
| 246 |
else if (rate == RATE_6M_IDX) |
| 247 |
next_rate = RATE_6M_IDX; |
| 248 |
break; |
| 249 |
case NL80211_BAND_2GHZ: |
| 250 |
if (!(il->_3945.sta_supp_rates & IL_OFDM_RATES_MASK) && |
| 251 |
il_is_associated(il)) { |
| 252 |
if (rate == RATE_11M_IDX) |
| 253 |
next_rate = RATE_5M_IDX; |
| 254 |
} |
| 255 |
break; |
| 256 |
|
| 257 |
default: |
| 258 |
break; |
| 259 |
} |
| 260 |
|
| 261 |
return next_rate; |
| 262 |
} |
| 263 |
|
| 264 |
/* |
| 265 |
* il3945_tx_queue_reclaim - Reclaim Tx queue entries already Tx'd |
| 266 |
* |
| 267 |
* When FW advances 'R' idx, all entries between old and new 'R' idx |
| 268 |
* need to be reclaimed. As result, some free space forms. If there is |
| 269 |
* enough free space (> low mark), wake the stack that feeds us. |
| 270 |
*/ |
| 271 |
static void |
| 272 |
il3945_tx_queue_reclaim(struct il_priv *il, int txq_id, int idx) |
| 273 |
{ |
| 274 |
struct il_tx_queue *txq = &il->txq[txq_id]; |
| 275 |
struct il_queue *q = &txq->q; |
| 276 |
struct sk_buff *skb; |
| 277 |
|
| 278 |
BUG_ON(txq_id == IL39_CMD_QUEUE_NUM); |
| 279 |
|
| 280 |
for (idx = il_queue_inc_wrap(idx, q->n_bd); q->read_ptr != idx; |
| 281 |
q->read_ptr = il_queue_inc_wrap(q->read_ptr, q->n_bd)) { |
| 282 |
|
| 283 |
skb = txq->skbs[txq->q.read_ptr]; |
| 284 |
ieee80211_tx_status_irqsafe(il->hw, skb); |
| 285 |
txq->skbs[txq->q.read_ptr] = NULL; |
| 286 |
il->ops->txq_free_tfd(il, txq); |
| 287 |
} |
| 288 |
|
| 289 |
if (il_queue_space(q) > q->low_mark && txq_id >= 0 && |
| 290 |
txq_id != IL39_CMD_QUEUE_NUM && il->mac80211_registered) |
| 291 |
il_wake_queue(il, txq); |
| 292 |
} |
| 293 |
|
| 294 |
/* |
| 295 |
* il3945_hdl_tx - Handle Tx response |
| 296 |
*/ |
| 297 |
static void |
| 298 |
il3945_hdl_tx(struct il_priv *il, struct il_rx_buf *rxb) |
| 299 |
{ |
| 300 |
struct il_rx_pkt *pkt = rxb_addr(rxb); |
| 301 |
u16 sequence = le16_to_cpu(pkt->hdr.sequence); |
| 302 |
int txq_id = SEQ_TO_QUEUE(sequence); |
| 303 |
int idx = SEQ_TO_IDX(sequence); |
| 304 |
struct il_tx_queue *txq = &il->txq[txq_id]; |
| 305 |
struct ieee80211_tx_info *info; |
| 306 |
struct il3945_tx_resp *tx_resp = (void *)&pkt->u.raw[0]; |
| 307 |
u32 status = le32_to_cpu(tx_resp->status); |
| 308 |
int rate_idx; |
| 309 |
int fail; |
| 310 |
|
| 311 |
if (idx >= txq->q.n_bd || il_queue_used(&txq->q, idx) == 0) { |
| 312 |
IL_ERR("Read idx for DMA queue txq_id (%d) idx %d " |
| 313 |
"is out of range [0-%d] %d %d\n", txq_id, idx, |
| 314 |
txq->q.n_bd, txq->q.write_ptr, txq->q.read_ptr); |
| 315 |
return; |
| 316 |
} |
| 317 |
|
| 318 |
/* |
| 319 |
* Firmware will not transmit frame on passive channel, if it not yet |
| 320 |
* received some valid frame on that channel. When this error happen |
| 321 |
* we have to wait until firmware will unblock itself i.e. when we |
| 322 |
* note received beacon or other frame. We unblock queues in |
| 323 |
* il3945_pass_packet_to_mac80211 or in il_mac_bss_info_changed. |
| 324 |
*/ |
| 325 |
if (unlikely((status & TX_STATUS_MSK) == TX_STATUS_FAIL_PASSIVE_NO_RX) && |
| 326 |
il->iw_mode == NL80211_IFTYPE_STATION) { |
| 327 |
il_stop_queues_by_reason(il, IL_STOP_REASON_PASSIVE); |
| 328 |
D_INFO("Stopped queues - RX waiting on passive channel\n"); |
| 329 |
} |
| 330 |
|
| 331 |
txq->time_stamp = jiffies; |
| 332 |
info = IEEE80211_SKB_CB(txq->skbs[txq->q.read_ptr]); |
| 333 |
ieee80211_tx_info_clear_status(info); |
| 334 |
|
| 335 |
/* Fill the MRR chain with some info about on-chip retransmissions */ |
| 336 |
rate_idx = il3945_hwrate_to_plcp_idx(tx_resp->rate); |
| 337 |
if (info->band == NL80211_BAND_5GHZ) |
| 338 |
rate_idx -= IL_FIRST_OFDM_RATE; |
| 339 |
|
| 340 |
fail = tx_resp->failure_frame; |
| 341 |
|
| 342 |
info->status.rates[0].idx = rate_idx; |
| 343 |
info->status.rates[0].count = fail + 1; /* add final attempt */ |
| 344 |
|
| 345 |
/* tx_status->rts_retry_count = tx_resp->failure_rts; */ |
| 346 |
info->flags |= |
| 347 |
((status & TX_STATUS_MSK) == |
| 348 |
TX_STATUS_SUCCESS) ? IEEE80211_TX_STAT_ACK : 0; |
| 349 |
|
| 350 |
D_TX("Tx queue %d Status %s (0x%08x) plcp rate %d retries %d\n", txq_id, |
| 351 |
il3945_get_tx_fail_reason(status), status, tx_resp->rate, |
| 352 |
tx_resp->failure_frame); |
| 353 |
|
| 354 |
D_TX_REPLY("Tx queue reclaim %d\n", idx); |
| 355 |
il3945_tx_queue_reclaim(il, txq_id, idx); |
| 356 |
|
| 357 |
if (status & TX_ABORT_REQUIRED_MSK) |
| 358 |
IL_ERR("TODO: Implement Tx ABORT REQUIRED!!!\n"); |
| 359 |
} |
| 360 |
|
| 361 |
/***************************************************************************** |
| 362 |
* |
| 363 |
* Intel PRO/Wireless 3945ABG/BG Network Connection |
| 364 |
* |
| 365 |
* RX handler implementations |
| 366 |
* |
| 367 |
*****************************************************************************/ |
| 368 |
#ifdef CONFIG_IWLEGACY_DEBUGFS |
| 369 |
static void |
| 370 |
il3945_accumulative_stats(struct il_priv *il, __le32 * stats) |
| 371 |
{ |
| 372 |
int i; |
| 373 |
__le32 *prev_stats; |
| 374 |
u32 *accum_stats; |
| 375 |
u32 *delta, *max_delta; |
| 376 |
|
| 377 |
prev_stats = (__le32 *) &il->_3945.stats; |
| 378 |
accum_stats = (u32 *) &il->_3945.accum_stats; |
| 379 |
delta = (u32 *) &il->_3945.delta_stats; |
| 380 |
max_delta = (u32 *) &il->_3945.max_delta; |
| 381 |
|
| 382 |
for (i = sizeof(__le32); i < sizeof(struct il3945_notif_stats); |
| 383 |
i += |
| 384 |
sizeof(__le32), stats++, prev_stats++, delta++, max_delta++, |
| 385 |
accum_stats++) { |
| 386 |
if (le32_to_cpu(*stats) > le32_to_cpu(*prev_stats)) { |
| 387 |
*delta = |
| 388 |
(le32_to_cpu(*stats) - le32_to_cpu(*prev_stats)); |
| 389 |
*accum_stats += *delta; |
| 390 |
if (*delta > *max_delta) |
| 391 |
*max_delta = *delta; |
| 392 |
} |
| 393 |
} |
| 394 |
|
| 395 |
/* reset accumulative stats for "no-counter" type stats */ |
| 396 |
il->_3945.accum_stats.general.temperature = |
| 397 |
il->_3945.stats.general.temperature; |
| 398 |
il->_3945.accum_stats.general.ttl_timestamp = |
| 399 |
il->_3945.stats.general.ttl_timestamp; |
| 400 |
} |
| 401 |
#endif |
| 402 |
|
| 403 |
void |
| 404 |
il3945_hdl_stats(struct il_priv *il, struct il_rx_buf *rxb) |
| 405 |
{ |
| 406 |
struct il_rx_pkt *pkt = rxb_addr(rxb); |
| 407 |
|
| 408 |
D_RX("Statistics notification received (%d vs %d).\n", |
| 409 |
(int)sizeof(struct il3945_notif_stats), |
| 410 |
le32_to_cpu(pkt->len_n_flags) & IL_RX_FRAME_SIZE_MSK); |
| 411 |
#ifdef CONFIG_IWLEGACY_DEBUGFS |
| 412 |
il3945_accumulative_stats(il, (__le32 *) &pkt->u.raw); |
| 413 |
#endif |
| 414 |
|
| 415 |
memcpy(&il->_3945.stats, pkt->u.raw, sizeof(il->_3945.stats)); |
| 416 |
} |
| 417 |
|
| 418 |
void |
| 419 |
il3945_hdl_c_stats(struct il_priv *il, struct il_rx_buf *rxb) |
| 420 |
{ |
| 421 |
struct il_rx_pkt *pkt = rxb_addr(rxb); |
| 422 |
__le32 *flag = (__le32 *) &pkt->u.raw; |
| 423 |
|
| 424 |
if (le32_to_cpu(*flag) & UCODE_STATS_CLEAR_MSK) { |
| 425 |
#ifdef CONFIG_IWLEGACY_DEBUGFS |
| 426 |
memset(&il->_3945.accum_stats, 0, |
| 427 |
sizeof(struct il3945_notif_stats)); |
| 428 |
memset(&il->_3945.delta_stats, 0, |
| 429 |
sizeof(struct il3945_notif_stats)); |
| 430 |
memset(&il->_3945.max_delta, 0, |
| 431 |
sizeof(struct il3945_notif_stats)); |
| 432 |
#endif |
| 433 |
D_RX("Statistics have been cleared\n"); |
| 434 |
} |
| 435 |
il3945_hdl_stats(il, rxb); |
| 436 |
} |
| 437 |
|
| 438 |
/****************************************************************************** |
| 439 |
* |
| 440 |
* Misc. internal state and helper functions |
| 441 |
* |
| 442 |
******************************************************************************/ |
| 443 |
|
| 444 |
/* This is necessary only for a number of stats, see the caller. */ |
| 445 |
static int |
| 446 |
il3945_is_network_packet(struct il_priv *il, struct ieee80211_hdr *header) |
| 447 |
{ |
| 448 |
/* Filter incoming packets to determine if they are targeted toward |
| 449 |
* this network, discarding packets coming from ourselves */ |
| 450 |
switch (il->iw_mode) { |
| 451 |
case NL80211_IFTYPE_ADHOC: /* Header: Dest. | Source | BSSID */ |
| 452 |
/* packets to our IBSS update information */ |
| 453 |
return ether_addr_equal_64bits(header->addr3, il->bssid); |
| 454 |
case NL80211_IFTYPE_STATION: /* Header: Dest. | AP{BSSID} | Source */ |
| 455 |
/* packets to our IBSS update information */ |
| 456 |
return ether_addr_equal_64bits(header->addr2, il->bssid); |
| 457 |
default: |
| 458 |
return 1; |
| 459 |
} |
| 460 |
} |
| 461 |
|
| 462 |
#define SMALL_PACKET_SIZE 256 |
| 463 |
|
| 464 |
static void |
| 465 |
il3945_pass_packet_to_mac80211(struct il_priv *il, struct il_rx_buf *rxb, |
| 466 |
struct ieee80211_rx_status *stats) |
| 467 |
{ |
| 468 |
struct il_rx_pkt *pkt = rxb_addr(rxb); |
| 469 |
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)IL_RX_DATA(pkt); |
| 470 |
struct il3945_rx_frame_hdr *rx_hdr = IL_RX_HDR(pkt); |
| 471 |
struct il3945_rx_frame_end *rx_end = IL_RX_END(pkt); |
| 472 |
u32 len = le16_to_cpu(rx_hdr->len); |
| 473 |
struct sk_buff *skb; |
| 474 |
__le16 fc = hdr->frame_control; |
| 475 |
u32 fraglen = PAGE_SIZE << il->hw_params.rx_page_order; |
| 476 |
|
| 477 |
/* We received data from the HW, so stop the watchdog */ |
| 478 |
if (unlikely(len + IL39_RX_FRAME_SIZE > fraglen)) { |
| 479 |
D_DROP("Corruption detected!\n"); |
| 480 |
return; |
| 481 |
} |
| 482 |
|
| 483 |
/* We only process data packets if the interface is open */ |
| 484 |
if (unlikely(!il->is_open)) { |
| 485 |
D_DROP("Dropping packet while interface is not open.\n"); |
| 486 |
return; |
| 487 |
} |
| 488 |
|
| 489 |
if (unlikely(test_bit(IL_STOP_REASON_PASSIVE, &il->stop_reason))) { |
| 490 |
il_wake_queues_by_reason(il, IL_STOP_REASON_PASSIVE); |
| 491 |
D_INFO("Woke queues - frame received on passive channel\n"); |
| 492 |
} |
| 493 |
|
| 494 |
skb = dev_alloc_skb(SMALL_PACKET_SIZE); |
| 495 |
if (!skb) { |
| 496 |
IL_ERR("dev_alloc_skb failed\n"); |
| 497 |
return; |
| 498 |
} |
| 499 |
|
| 500 |
if (!il3945_mod_params.sw_crypto) |
| 501 |
il_set_decrypted_flag(il, (struct ieee80211_hdr *)pkt, |
| 502 |
le32_to_cpu(rx_end->status), stats); |
| 503 |
|
| 504 |
/* If frame is small enough to fit into skb->head, copy it |
| 505 |
* and do not consume a full page |
| 506 |
*/ |
| 507 |
if (len <= SMALL_PACKET_SIZE) { |
| 508 |
skb_put_data(skb, rx_hdr->payload, len); |
| 509 |
} else { |
| 510 |
skb_add_rx_frag(skb, 0, rxb->page, |
| 511 |
(void *)rx_hdr->payload - (void *)pkt, len, |
| 512 |
fraglen); |
| 513 |
il->alloc_rxb_page--; |
| 514 |
rxb->page = NULL; |
| 515 |
} |
| 516 |
il_update_stats(il, false, fc, len); |
| 517 |
memcpy(IEEE80211_SKB_RXCB(skb), stats, sizeof(*stats)); |
| 518 |
|
| 519 |
ieee80211_rx(il->hw, skb); |
| 520 |
} |
| 521 |
|
| 522 |
#define IL_DELAY_NEXT_SCAN_AFTER_ASSOC (HZ*6) |
| 523 |
|
| 524 |
static void |
| 525 |
il3945_hdl_rx(struct il_priv *il, struct il_rx_buf *rxb) |
| 526 |
{ |
| 527 |
struct ieee80211_hdr *header; |
| 528 |
struct ieee80211_rx_status rx_status = {}; |
| 529 |
struct il_rx_pkt *pkt = rxb_addr(rxb); |
| 530 |
struct il3945_rx_frame_stats_hdr *rx_stats = IL_RX_STATS(pkt); |
| 531 |
struct il3945_rx_frame_hdr *rx_hdr = IL_RX_HDR(pkt); |
| 532 |
struct il3945_rx_frame_end *rx_end = IL_RX_END(pkt); |
| 533 |
u16 rx_stats_sig_avg __maybe_unused = le16_to_cpu(rx_stats->sig_avg); |
| 534 |
u16 rx_stats_noise_diff __maybe_unused = |
| 535 |
le16_to_cpu(rx_stats->noise_diff); |
| 536 |
u8 network_packet; |
| 537 |
|
| 538 |
rx_status.flag = 0; |
| 539 |
rx_status.mactime = le64_to_cpu(rx_end->timestamp); |
| 540 |
rx_status.band = |
| 541 |
(rx_hdr-> |
| 542 |
phy_flags & RX_RES_PHY_FLAGS_BAND_24_MSK) ? NL80211_BAND_2GHZ : |
| 543 |
NL80211_BAND_5GHZ; |
| 544 |
rx_status.freq = |
| 545 |
ieee80211_channel_to_frequency(le16_to_cpu(rx_hdr->channel), |
| 546 |
rx_status.band); |
| 547 |
|
| 548 |
rx_status.rate_idx = il3945_hwrate_to_plcp_idx(rx_hdr->rate); |
| 549 |
if (rx_status.band == NL80211_BAND_5GHZ) |
| 550 |
rx_status.rate_idx -= IL_FIRST_OFDM_RATE; |
| 551 |
|
| 552 |
rx_status.antenna = |
| 553 |
(le16_to_cpu(rx_hdr->phy_flags) & RX_RES_PHY_FLAGS_ANTENNA_MSK) >> |
| 554 |
4; |
| 555 |
|
| 556 |
/* set the preamble flag if appropriate */ |
| 557 |
if (rx_hdr->phy_flags & RX_RES_PHY_FLAGS_SHORT_PREAMBLE_MSK) |
| 558 |
rx_status.enc_flags |= RX_ENC_FLAG_SHORTPRE; |
| 559 |
|
| 560 |
if ((unlikely(rx_stats->phy_count > 20))) { |
| 561 |
D_DROP("dsp size out of range [0,20]: %d\n", |
| 562 |
rx_stats->phy_count); |
| 563 |
return; |
| 564 |
} |
| 565 |
|
| 566 |
if (!(rx_end->status & RX_RES_STATUS_NO_CRC32_ERROR) || |
| 567 |
!(rx_end->status & RX_RES_STATUS_NO_RXE_OVERFLOW)) { |
| 568 |
D_RX("Bad CRC or FIFO: 0x%08X.\n", rx_end->status); |
| 569 |
return; |
| 570 |
} |
| 571 |
|
| 572 |
/* Convert 3945's rssi indicator to dBm */ |
| 573 |
rx_status.signal = rx_stats->rssi - IL39_RSSI_OFFSET; |
| 574 |
|
| 575 |
D_STATS("Rssi %d sig_avg %d noise_diff %d\n", rx_status.signal, |
| 576 |
rx_stats_sig_avg, rx_stats_noise_diff); |
| 577 |
|
| 578 |
header = (struct ieee80211_hdr *)IL_RX_DATA(pkt); |
| 579 |
|
| 580 |
network_packet = il3945_is_network_packet(il, header); |
| 581 |
|
| 582 |
D_STATS("[%c] %d RSSI:%d Signal:%u, Rate:%u\n", |
| 583 |
network_packet ? '*' : ' ', le16_to_cpu(rx_hdr->channel), |
| 584 |
rx_status.signal, rx_status.signal, rx_status.rate_idx); |
| 585 |
|
| 586 |
if (network_packet) { |
| 587 |
il->_3945.last_beacon_time = |
| 588 |
le32_to_cpu(rx_end->beacon_timestamp); |
| 589 |
il->_3945.last_tsf = le64_to_cpu(rx_end->timestamp); |
| 590 |
il->_3945.last_rx_rssi = rx_status.signal; |
| 591 |
} |
| 592 |
|
| 593 |
il3945_pass_packet_to_mac80211(il, rxb, &rx_status); |
| 594 |
} |
| 595 |
|
| 596 |
int |
| 597 |
il3945_hw_txq_attach_buf_to_tfd(struct il_priv *il, struct il_tx_queue *txq, |
| 598 |
dma_addr_t addr, u16 len, u8 reset, u8 pad) |
| 599 |
{ |
| 600 |
int count; |
| 601 |
struct il_queue *q; |
| 602 |
struct il3945_tfd *tfd, *tfd_tmp; |
| 603 |
|
| 604 |
q = &txq->q; |
| 605 |
tfd_tmp = (struct il3945_tfd *)txq->tfds; |
| 606 |
tfd = &tfd_tmp[q->write_ptr]; |
| 607 |
|
| 608 |
if (reset) |
| 609 |
memset(tfd, 0, sizeof(*tfd)); |
| 610 |
|
| 611 |
count = TFD_CTL_COUNT_GET(le32_to_cpu(tfd->control_flags)); |
| 612 |
|
| 613 |
if (count >= NUM_TFD_CHUNKS || count < 0) { |
| 614 |
IL_ERR("Error can not send more than %d chunks\n", |
| 615 |
NUM_TFD_CHUNKS); |
| 616 |
return -EINVAL; |
| 617 |
} |
| 618 |
|
| 619 |
tfd->tbs[count].addr = cpu_to_le32(addr); |
| 620 |
tfd->tbs[count].len = cpu_to_le32(len); |
| 621 |
|
| 622 |
count++; |
| 623 |
|
| 624 |
tfd->control_flags = |
| 625 |
cpu_to_le32(TFD_CTL_COUNT_SET(count) | TFD_CTL_PAD_SET(pad)); |
| 626 |
|
| 627 |
return 0; |
| 628 |
} |
| 629 |
|
| 630 |
/* |
| 631 |
* il3945_hw_txq_free_tfd - Free one TFD, those at idx [txq->q.read_ptr] |
| 632 |
* |
| 633 |
* Does NOT advance any idxes |
| 634 |
*/ |
| 635 |
void |
| 636 |
il3945_hw_txq_free_tfd(struct il_priv *il, struct il_tx_queue *txq) |
| 637 |
{ |
| 638 |
struct il3945_tfd *tfd_tmp = (struct il3945_tfd *)txq->tfds; |
| 639 |
int idx = txq->q.read_ptr; |
| 640 |
struct il3945_tfd *tfd = &tfd_tmp[idx]; |
| 641 |
struct pci_dev *dev = il->pci_dev; |
| 642 |
int i; |
| 643 |
int counter; |
| 644 |
|
| 645 |
/* sanity check */ |
| 646 |
counter = TFD_CTL_COUNT_GET(le32_to_cpu(tfd->control_flags)); |
| 647 |
if (counter > NUM_TFD_CHUNKS) { |
| 648 |
IL_ERR("Too many chunks: %i\n", counter); |
| 649 |
/* @todo issue fatal error, it is quite serious situation */ |
| 650 |
return; |
| 651 |
} |
| 652 |
|
| 653 |
/* Unmap tx_cmd */ |
| 654 |
if (counter) |
| 655 |
dma_unmap_single(&dev->dev, |
| 656 |
dma_unmap_addr(&txq->meta[idx], mapping), |
| 657 |
dma_unmap_len(&txq->meta[idx], len), |
| 658 |
DMA_TO_DEVICE); |
| 659 |
|
| 660 |
/* unmap chunks if any */ |
| 661 |
|
| 662 |
for (i = 1; i < counter; i++) |
| 663 |
dma_unmap_single(&dev->dev, le32_to_cpu(tfd->tbs[i].addr), |
| 664 |
le32_to_cpu(tfd->tbs[i].len), DMA_TO_DEVICE); |
| 665 |
|
| 666 |
/* free SKB */ |
| 667 |
if (txq->skbs) { |
| 668 |
struct sk_buff *skb = txq->skbs[txq->q.read_ptr]; |
| 669 |
|
| 670 |
/* can be called from irqs-disabled context */ |
| 671 |
if (skb) { |
| 672 |
dev_kfree_skb_any(skb); |
| 673 |
txq->skbs[txq->q.read_ptr] = NULL; |
| 674 |
} |
| 675 |
} |
| 676 |
} |
| 677 |
|
| 678 |
/* |
| 679 |
* il3945_hw_build_tx_cmd_rate - Add rate portion to TX_CMD: |
| 680 |
* |
| 681 |
*/ |
| 682 |
void |
| 683 |
il3945_hw_build_tx_cmd_rate(struct il_priv *il, struct il_device_cmd *cmd, |
| 684 |
struct ieee80211_tx_info *info, |
| 685 |
struct ieee80211_hdr *hdr, int sta_id) |
| 686 |
{ |
| 687 |
u16 hw_value = ieee80211_get_tx_rate(il->hw, info)->hw_value; |
| 688 |
u16 rate_idx = min(hw_value & 0xffff, RATE_COUNT_3945 - 1); |
| 689 |
u16 rate_mask; |
| 690 |
int rate; |
| 691 |
const u8 rts_retry_limit = 7; |
| 692 |
u8 data_retry_limit; |
| 693 |
__le32 tx_flags; |
| 694 |
__le16 fc = hdr->frame_control; |
| 695 |
struct il3945_tx_cmd *tx_cmd = (struct il3945_tx_cmd *)cmd->cmd.payload; |
| 696 |
|
| 697 |
rate = il3945_rates[rate_idx].plcp; |
| 698 |
tx_flags = tx_cmd->tx_flags; |
| 699 |
|
| 700 |
/* We need to figure out how to get the sta->supp_rates while |
| 701 |
* in this running context */ |
| 702 |
rate_mask = RATES_MASK_3945; |
| 703 |
|
| 704 |
/* Set retry limit on DATA packets and Probe Responses */ |
| 705 |
if (ieee80211_is_probe_resp(fc)) |
| 706 |
data_retry_limit = 3; |
| 707 |
else |
| 708 |
data_retry_limit = IL_DEFAULT_TX_RETRY; |
| 709 |
tx_cmd->data_retry_limit = data_retry_limit; |
| 710 |
/* Set retry limit on RTS packets */ |
| 711 |
tx_cmd->rts_retry_limit = min(data_retry_limit, rts_retry_limit); |
| 712 |
|
| 713 |
tx_cmd->rate = rate; |
| 714 |
tx_cmd->tx_flags = tx_flags; |
| 715 |
|
| 716 |
/* OFDM */ |
| 717 |
tx_cmd->supp_rates[0] = |
| 718 |
((rate_mask & IL_OFDM_RATES_MASK) >> IL_FIRST_OFDM_RATE) & 0xFF; |
| 719 |
|
| 720 |
/* CCK */ |
| 721 |
tx_cmd->supp_rates[1] = (rate_mask & 0xF); |
| 722 |
|
| 723 |
D_RATE("Tx sta id: %d, rate: %d (plcp), flags: 0x%4X " |
| 724 |
"cck/ofdm mask: 0x%x/0x%x\n", sta_id, tx_cmd->rate, |
| 725 |
le32_to_cpu(tx_cmd->tx_flags), tx_cmd->supp_rates[1], |
| 726 |
tx_cmd->supp_rates[0]); |
| 727 |
} |
| 728 |
|
| 729 |
static u8 |
| 730 |
il3945_sync_sta(struct il_priv *il, int sta_id, u16 tx_rate) |
| 731 |
{ |
| 732 |
unsigned long flags_spin; |
| 733 |
struct il_station_entry *station; |
| 734 |
|
| 735 |
if (sta_id == IL_INVALID_STATION) |
| 736 |
return IL_INVALID_STATION; |
| 737 |
|
| 738 |
spin_lock_irqsave(&il->sta_lock, flags_spin); |
| 739 |
station = &il->stations[sta_id]; |
| 740 |
|
| 741 |
station->sta.sta.modify_mask = STA_MODIFY_TX_RATE_MSK; |
| 742 |
station->sta.rate_n_flags = cpu_to_le16(tx_rate); |
| 743 |
station->sta.mode = STA_CONTROL_MODIFY_MSK; |
| 744 |
il_send_add_sta(il, &station->sta, CMD_ASYNC); |
| 745 |
spin_unlock_irqrestore(&il->sta_lock, flags_spin); |
| 746 |
|
| 747 |
D_RATE("SCALE sync station %d to rate %d\n", sta_id, tx_rate); |
| 748 |
return sta_id; |
| 749 |
} |
| 750 |
|
| 751 |
static void |
| 752 |
il3945_set_pwr_vmain(struct il_priv *il) |
| 753 |
{ |
| 754 |
/* |
| 755 |
* (for documentation purposes) |
| 756 |
* to set power to V_AUX, do |
| 757 |
|
| 758 |
if (pci_pme_capable(il->pci_dev, PCI_D3cold)) { |
| 759 |
il_set_bits_mask_prph(il, APMG_PS_CTRL_REG, |
| 760 |
APMG_PS_CTRL_VAL_PWR_SRC_VAUX, |
| 761 |
~APMG_PS_CTRL_MSK_PWR_SRC); |
| 762 |
|
| 763 |
_il_poll_bit(il, CSR_GPIO_IN, |
| 764 |
CSR_GPIO_IN_VAL_VAUX_PWR_SRC, |
| 765 |
CSR_GPIO_IN_BIT_AUX_POWER, 5000); |
| 766 |
} |
| 767 |
*/ |
| 768 |
|
| 769 |
il_set_bits_mask_prph(il, APMG_PS_CTRL_REG, |
| 770 |
APMG_PS_CTRL_VAL_PWR_SRC_VMAIN, |
| 771 |
~APMG_PS_CTRL_MSK_PWR_SRC); |
| 772 |
|
| 773 |
_il_poll_bit(il, CSR_GPIO_IN, CSR_GPIO_IN_VAL_VMAIN_PWR_SRC, |
| 774 |
CSR_GPIO_IN_BIT_AUX_POWER, 5000); |
| 775 |
} |
| 776 |
|
| 777 |
static int |
| 778 |
il3945_rx_init(struct il_priv *il, struct il_rx_queue *rxq) |
| 779 |
{ |
| 780 |
il_wr(il, FH39_RCSR_RBD_BASE(0), rxq->bd_dma); |
| 781 |
il_wr(il, FH39_RCSR_RPTR_ADDR(0), rxq->rb_stts_dma); |
| 782 |
il_wr(il, FH39_RCSR_WPTR(0), 0); |
| 783 |
il_wr(il, FH39_RCSR_CONFIG(0), |
| 784 |
FH39_RCSR_RX_CONFIG_REG_VAL_DMA_CHNL_EN_ENABLE | |
| 785 |
FH39_RCSR_RX_CONFIG_REG_VAL_RDRBD_EN_ENABLE | |
| 786 |
FH39_RCSR_RX_CONFIG_REG_BIT_WR_STTS_EN | |
| 787 |
FH39_RCSR_RX_CONFIG_REG_VAL_MAX_FRAG_SIZE_128 | (RX_QUEUE_SIZE_LOG |
| 788 |
<< |
| 789 |
FH39_RCSR_RX_CONFIG_REG_POS_RBDC_SIZE) |
| 790 |
| FH39_RCSR_RX_CONFIG_REG_VAL_IRQ_DEST_INT_HOST | (1 << |
| 791 |
FH39_RCSR_RX_CONFIG_REG_POS_IRQ_RBTH) |
| 792 |
| FH39_RCSR_RX_CONFIG_REG_VAL_MSG_MODE_FH); |
| 793 |
|
| 794 |
/* fake read to flush all prev I/O */ |
| 795 |
il_rd(il, FH39_RSSR_CTRL); |
| 796 |
|
| 797 |
return 0; |
| 798 |
} |
| 799 |
|
| 800 |
static int |
| 801 |
il3945_tx_reset(struct il_priv *il) |
| 802 |
{ |
| 803 |
/* bypass mode */ |
| 804 |
il_wr_prph(il, ALM_SCD_MODE_REG, 0x2); |
| 805 |
|
| 806 |
/* RA 0 is active */ |
| 807 |
il_wr_prph(il, ALM_SCD_ARASTAT_REG, 0x01); |
| 808 |
|
| 809 |
/* all 6 fifo are active */ |
| 810 |
il_wr_prph(il, ALM_SCD_TXFACT_REG, 0x3f); |
| 811 |
|
| 812 |
il_wr_prph(il, ALM_SCD_SBYP_MODE_1_REG, 0x010000); |
| 813 |
il_wr_prph(il, ALM_SCD_SBYP_MODE_2_REG, 0x030002); |
| 814 |
il_wr_prph(il, ALM_SCD_TXF4MF_REG, 0x000004); |
| 815 |
il_wr_prph(il, ALM_SCD_TXF5MF_REG, 0x000005); |
| 816 |
|
| 817 |
il_wr(il, FH39_TSSR_CBB_BASE, il->_3945.shared_phys); |
| 818 |
|
| 819 |
il_wr(il, FH39_TSSR_MSG_CONFIG, |
| 820 |
FH39_TSSR_TX_MSG_CONFIG_REG_VAL_SNOOP_RD_TXPD_ON | |
| 821 |
FH39_TSSR_TX_MSG_CONFIG_REG_VAL_ORDER_RD_TXPD_ON | |
| 822 |
FH39_TSSR_TX_MSG_CONFIG_REG_VAL_MAX_FRAG_SIZE_128B | |
| 823 |
FH39_TSSR_TX_MSG_CONFIG_REG_VAL_SNOOP_RD_TFD_ON | |
| 824 |
FH39_TSSR_TX_MSG_CONFIG_REG_VAL_ORDER_RD_CBB_ON | |
| 825 |
FH39_TSSR_TX_MSG_CONFIG_REG_VAL_ORDER_RSP_WAIT_TH | |
| 826 |
FH39_TSSR_TX_MSG_CONFIG_REG_VAL_RSP_WAIT_TH); |
| 827 |
|
| 828 |
return 0; |
| 829 |
} |
| 830 |
|
| 831 |
/* |
| 832 |
* il3945_txq_ctx_reset - Reset TX queue context |
| 833 |
* |
| 834 |
* Destroys all DMA structures and initialize them again |
| 835 |
*/ |
| 836 |
static int |
| 837 |
il3945_txq_ctx_reset(struct il_priv *il) |
| 838 |
{ |
| 839 |
int rc, txq_id; |
| 840 |
|
| 841 |
il3945_hw_txq_ctx_free(il); |
| 842 |
|
| 843 |
/* allocate tx queue structure */ |
| 844 |
rc = il_alloc_txq_mem(il); |
| 845 |
if (rc) |
| 846 |
return rc; |
| 847 |
|
| 848 |
/* Tx CMD queue */ |
| 849 |
rc = il3945_tx_reset(il); |
| 850 |
if (rc) |
| 851 |
goto error; |
| 852 |
|
| 853 |
/* Tx queue(s) */ |
| 854 |
for (txq_id = 0; txq_id < il->hw_params.max_txq_num; txq_id++) { |
| 855 |
rc = il_tx_queue_init(il, txq_id); |
| 856 |
if (rc) { |
| 857 |
IL_ERR("Tx %d queue init failed\n", txq_id); |
| 858 |
goto error; |
| 859 |
} |
| 860 |
} |
| 861 |
|
| 862 |
return rc; |
| 863 |
|
| 864 |
error: |
| 865 |
il3945_hw_txq_ctx_free(il); |
| 866 |
return rc; |
| 867 |
} |
| 868 |
|
| 869 |
/* |
| 870 |
* Start up 3945's basic functionality after it has been reset |
| 871 |
* (e.g. after platform boot, or shutdown via il_apm_stop()) |
| 872 |
* NOTE: This does not load uCode nor start the embedded processor |
| 873 |
*/ |
| 874 |
static int |
| 875 |
il3945_apm_init(struct il_priv *il) |
| 876 |
{ |
| 877 |
int ret = il_apm_init(il); |
| 878 |
|
| 879 |
/* Clear APMG (NIC's internal power management) interrupts */ |
| 880 |
il_wr_prph(il, APMG_RTC_INT_MSK_REG, 0x0); |
| 881 |
il_wr_prph(il, APMG_RTC_INT_STT_REG, 0xFFFFFFFF); |
| 882 |
|
| 883 |
/* Reset radio chip */ |
| 884 |
il_set_bits_prph(il, APMG_PS_CTRL_REG, APMG_PS_CTRL_VAL_RESET_REQ); |
| 885 |
udelay(5); |
| 886 |
il_clear_bits_prph(il, APMG_PS_CTRL_REG, APMG_PS_CTRL_VAL_RESET_REQ); |
| 887 |
|
| 888 |
return ret; |
| 889 |
} |
| 890 |
|
| 891 |
static void |
| 892 |
il3945_nic_config(struct il_priv *il) |
| 893 |
{ |
| 894 |
struct il3945_eeprom *eeprom = (struct il3945_eeprom *)il->eeprom; |
| 895 |
unsigned long flags; |
| 896 |
u8 rev_id = il->pci_dev->revision; |
| 897 |
|
| 898 |
spin_lock_irqsave(&il->lock, flags); |
| 899 |
|
| 900 |
/* Determine HW type */ |
| 901 |
D_INFO("HW Revision ID = 0x%X\n", rev_id); |
| 902 |
|
| 903 |
if (rev_id & PCI_CFG_REV_ID_BIT_RTP) |
| 904 |
D_INFO("RTP type\n"); |
| 905 |
else if (rev_id & PCI_CFG_REV_ID_BIT_BASIC_SKU) { |
| 906 |
D_INFO("3945 RADIO-MB type\n"); |
| 907 |
il_set_bit(il, CSR_HW_IF_CONFIG_REG, |
| 908 |
CSR39_HW_IF_CONFIG_REG_BIT_3945_MB); |
| 909 |
} else { |
| 910 |
D_INFO("3945 RADIO-MM type\n"); |
| 911 |
il_set_bit(il, CSR_HW_IF_CONFIG_REG, |
| 912 |
CSR39_HW_IF_CONFIG_REG_BIT_3945_MM); |
| 913 |
} |
| 914 |
|
| 915 |
if (EEPROM_SKU_CAP_OP_MODE_MRC == eeprom->sku_cap) { |
| 916 |
D_INFO("SKU OP mode is mrc\n"); |
| 917 |
il_set_bit(il, CSR_HW_IF_CONFIG_REG, |
| 918 |
CSR39_HW_IF_CONFIG_REG_BIT_SKU_MRC); |
| 919 |
} else |
| 920 |
D_INFO("SKU OP mode is basic\n"); |
| 921 |
|
| 922 |
if ((eeprom->board_revision & 0xF0) == 0xD0) { |
| 923 |
D_INFO("3945ABG revision is 0x%X\n", eeprom->board_revision); |
| 924 |
il_set_bit(il, CSR_HW_IF_CONFIG_REG, |
| 925 |
CSR39_HW_IF_CONFIG_REG_BIT_BOARD_TYPE); |
| 926 |
} else { |
| 927 |
D_INFO("3945ABG revision is 0x%X\n", eeprom->board_revision); |
| 928 |
il_clear_bit(il, CSR_HW_IF_CONFIG_REG, |
| 929 |
CSR39_HW_IF_CONFIG_REG_BIT_BOARD_TYPE); |
| 930 |
} |
| 931 |
|
| 932 |
if (eeprom->almgor_m_version <= 1) { |
| 933 |
il_set_bit(il, CSR_HW_IF_CONFIG_REG, |
| 934 |
CSR39_HW_IF_CONFIG_REG_BITS_SILICON_TYPE_A); |
| 935 |
D_INFO("Card M type A version is 0x%X\n", |
| 936 |
eeprom->almgor_m_version); |
| 937 |
} else { |
| 938 |
D_INFO("Card M type B version is 0x%X\n", |
| 939 |
eeprom->almgor_m_version); |
| 940 |
il_set_bit(il, CSR_HW_IF_CONFIG_REG, |
| 941 |
CSR39_HW_IF_CONFIG_REG_BITS_SILICON_TYPE_B); |
| 942 |
} |
| 943 |
spin_unlock_irqrestore(&il->lock, flags); |
| 944 |
|
| 945 |
if (eeprom->sku_cap & EEPROM_SKU_CAP_SW_RF_KILL_ENABLE) |
| 946 |
D_RF_KILL("SW RF KILL supported in EEPROM.\n"); |
| 947 |
|
| 948 |
if (eeprom->sku_cap & EEPROM_SKU_CAP_HW_RF_KILL_ENABLE) |
| 949 |
D_RF_KILL("HW RF KILL supported in EEPROM.\n"); |
| 950 |
} |
| 951 |
|
| 952 |
int |
| 953 |
il3945_hw_nic_init(struct il_priv *il) |
| 954 |
{ |
| 955 |
int rc; |
| 956 |
unsigned long flags; |
| 957 |
struct il_rx_queue *rxq = &il->rxq; |
| 958 |
|
| 959 |
spin_lock_irqsave(&il->lock, flags); |
| 960 |
il3945_apm_init(il); |
| 961 |
spin_unlock_irqrestore(&il->lock, flags); |
| 962 |
|
| 963 |
il3945_set_pwr_vmain(il); |
| 964 |
il3945_nic_config(il); |
| 965 |
|
| 966 |
/* Allocate the RX queue, or reset if it is already allocated */ |
| 967 |
if (!rxq->bd) { |
| 968 |
rc = il_rx_queue_alloc(il); |
| 969 |
if (rc) { |
| 970 |
IL_ERR("Unable to initialize Rx queue\n"); |
| 971 |
return -ENOMEM; |
| 972 |
} |
| 973 |
} else |
| 974 |
il3945_rx_queue_reset(il, rxq); |
| 975 |
|
| 976 |
il3945_rx_replenish(il); |
| 977 |
|
| 978 |
il3945_rx_init(il, rxq); |
| 979 |
|
| 980 |
/* Look at using this instead: |
| 981 |
rxq->need_update = 1; |
| 982 |
il_rx_queue_update_write_ptr(il, rxq); |
| 983 |
*/ |
| 984 |
|
| 985 |
il_wr(il, FH39_RCSR_WPTR(0), rxq->write & ~7); |
| 986 |
|
| 987 |
rc = il3945_txq_ctx_reset(il); |
| 988 |
if (rc) |
| 989 |
return rc; |
| 990 |
|
| 991 |
set_bit(S_INIT, &il->status); |
| 992 |
|
| 993 |
return 0; |
| 994 |
} |
| 995 |
|
| 996 |
/* |
| 997 |
* il3945_hw_txq_ctx_free - Free TXQ Context |
| 998 |
* |
| 999 |
* Destroy all TX DMA queues and structures |
| 1000 |
*/ |
| 1001 |
void |
| 1002 |
il3945_hw_txq_ctx_free(struct il_priv *il) |
| 1003 |
{ |
| 1004 |
int txq_id; |
| 1005 |
|
| 1006 |
/* Tx queues */ |
| 1007 |
if (il->txq) { |
| 1008 |
for (txq_id = 0; txq_id < il->hw_params.max_txq_num; txq_id++) |
| 1009 |
if (txq_id == IL39_CMD_QUEUE_NUM) |
| 1010 |
il_cmd_queue_free(il); |
| 1011 |
else |
| 1012 |
il_tx_queue_free(il, txq_id); |
| 1013 |
} |
| 1014 |
|
| 1015 |
/* free tx queue structure */ |
| 1016 |
il_free_txq_mem(il); |
| 1017 |
} |
| 1018 |
|
| 1019 |
void |
| 1020 |
il3945_hw_txq_ctx_stop(struct il_priv *il) |
| 1021 |
{ |
| 1022 |
int txq_id; |
| 1023 |
|
| 1024 |
/* stop SCD */ |
| 1025 |
_il_wr_prph(il, ALM_SCD_MODE_REG, 0); |
| 1026 |
_il_wr_prph(il, ALM_SCD_TXFACT_REG, 0); |
| 1027 |
|
| 1028 |
/* reset TFD queues */ |
| 1029 |
for (txq_id = 0; txq_id < il->hw_params.max_txq_num; txq_id++) { |
| 1030 |
_il_wr(il, FH39_TCSR_CONFIG(txq_id), 0x0); |
| 1031 |
_il_poll_bit(il, FH39_TSSR_TX_STATUS, |
| 1032 |
FH39_TSSR_TX_STATUS_REG_MSK_CHNL_IDLE(txq_id), |
| 1033 |
FH39_TSSR_TX_STATUS_REG_MSK_CHNL_IDLE(txq_id), |
| 1034 |
1000); |
| 1035 |
} |
| 1036 |
} |
| 1037 |
|
| 1038 |
/* |
| 1039 |
* il3945_hw_reg_adjust_power_by_temp |
| 1040 |
* return idx delta into power gain settings table |
| 1041 |
*/ |
| 1042 |
static int |
| 1043 |
il3945_hw_reg_adjust_power_by_temp(int new_reading, int old_reading) |
| 1044 |
{ |
| 1045 |
return (new_reading - old_reading) * (-11) / 100; |
| 1046 |
} |
| 1047 |
|
| 1048 |
/* |
| 1049 |
* il3945_hw_reg_temp_out_of_range - Keep temperature in sane range |
| 1050 |
*/ |
| 1051 |
static inline int |
| 1052 |
il3945_hw_reg_temp_out_of_range(int temperature) |
| 1053 |
{ |
| 1054 |
return (temperature < -260 || temperature > 25) ? 1 : 0; |
| 1055 |
} |
| 1056 |
|
| 1057 |
int |
| 1058 |
il3945_hw_get_temperature(struct il_priv *il) |
| 1059 |
{ |
| 1060 |
return _il_rd(il, CSR_UCODE_DRV_GP2); |
| 1061 |
} |
| 1062 |
|
| 1063 |
/* |
| 1064 |
* il3945_hw_reg_txpower_get_temperature |
| 1065 |
* get the current temperature by reading from NIC |
| 1066 |
*/ |
| 1067 |
static int |
| 1068 |
il3945_hw_reg_txpower_get_temperature(struct il_priv *il) |
| 1069 |
{ |
| 1070 |
struct il3945_eeprom *eeprom = (struct il3945_eeprom *)il->eeprom; |
| 1071 |
int temperature; |
| 1072 |
|
| 1073 |
temperature = il3945_hw_get_temperature(il); |
| 1074 |
|
| 1075 |
/* driver's okay range is -260 to +25. |
| 1076 |
* human readable okay range is 0 to +285 */ |
| 1077 |
D_INFO("Temperature: %d\n", temperature + IL_TEMP_CONVERT); |
| 1078 |
|
| 1079 |
/* handle insane temp reading */ |
| 1080 |
if (il3945_hw_reg_temp_out_of_range(temperature)) { |
| 1081 |
IL_ERR("Error bad temperature value %d\n", temperature); |
| 1082 |
|
| 1083 |
/* if really really hot(?), |
| 1084 |
* substitute the 3rd band/group's temp measured at factory */ |
| 1085 |
if (il->last_temperature > 100) |
| 1086 |
temperature = eeprom->groups[2].temperature; |
| 1087 |
else /* else use most recent "sane" value from driver */ |
| 1088 |
temperature = il->last_temperature; |
| 1089 |
} |
| 1090 |
|
| 1091 |
return temperature; /* raw, not "human readable" */ |
| 1092 |
} |
| 1093 |
|
| 1094 |
/* Adjust Txpower only if temperature variance is greater than threshold. |
| 1095 |
* |
| 1096 |
* Both are lower than older versions' 9 degrees */ |
| 1097 |
#define IL_TEMPERATURE_LIMIT_TIMER 6 |
| 1098 |
|
| 1099 |
/* |
| 1100 |
* il3945_is_temp_calib_needed - determines if new calibration is needed |
| 1101 |
* |
| 1102 |
* records new temperature in tx_mgr->temperature. |
| 1103 |
* replaces tx_mgr->last_temperature *only* if calib needed |
| 1104 |
* (assumes caller will actually do the calibration!). */ |
| 1105 |
static int |
| 1106 |
il3945_is_temp_calib_needed(struct il_priv *il) |
| 1107 |
{ |
| 1108 |
int temp_diff; |
| 1109 |
|
| 1110 |
il->temperature = il3945_hw_reg_txpower_get_temperature(il); |
| 1111 |
temp_diff = il->temperature - il->last_temperature; |
| 1112 |
|
| 1113 |
/* get absolute value */ |
| 1114 |
if (temp_diff < 0) { |
| 1115 |
D_POWER("Getting cooler, delta %d,\n", temp_diff); |
| 1116 |
temp_diff = -temp_diff; |
| 1117 |
} else if (temp_diff == 0) |
| 1118 |
D_POWER("Same temp,\n"); |
| 1119 |
else |
| 1120 |
D_POWER("Getting warmer, delta %d,\n", temp_diff); |
| 1121 |
|
| 1122 |
/* if we don't need calibration, *don't* update last_temperature */ |
| 1123 |
if (temp_diff < IL_TEMPERATURE_LIMIT_TIMER) { |
| 1124 |
D_POWER("Timed thermal calib not needed\n"); |
| 1125 |
return 0; |
| 1126 |
} |
| 1127 |
|
| 1128 |
D_POWER("Timed thermal calib needed\n"); |
| 1129 |
|
| 1130 |
/* assume that caller will actually do calib ... |
| 1131 |
* update the "last temperature" value */ |
| 1132 |
il->last_temperature = il->temperature; |
| 1133 |
return 1; |
| 1134 |
} |
| 1135 |
|
| 1136 |
#define IL_MAX_GAIN_ENTRIES 78 |
| 1137 |
#define IL_CCK_FROM_OFDM_POWER_DIFF -5 |
| 1138 |
#define IL_CCK_FROM_OFDM_IDX_DIFF (10) |
| 1139 |
|
| 1140 |
/* radio and DSP power table, each step is 1/2 dB. |
| 1141 |
* 1st number is for RF analog gain, 2nd number is for DSP pre-DAC gain. */ |
| 1142 |
static struct il3945_tx_power power_gain_table[2][IL_MAX_GAIN_ENTRIES] = { |
| 1143 |
{ |
| 1144 |
{251, 127}, /* 2.4 GHz, highest power */ |
| 1145 |
{251, 127}, |
| 1146 |
{251, 127}, |
| 1147 |
{251, 127}, |
| 1148 |
{251, 125}, |
| 1149 |
{251, 110}, |
| 1150 |
{251, 105}, |
| 1151 |
{251, 98}, |
| 1152 |
{187, 125}, |
| 1153 |
{187, 115}, |
| 1154 |
{187, 108}, |
| 1155 |
{187, 99}, |
| 1156 |
{243, 119}, |
| 1157 |
{243, 111}, |
| 1158 |
{243, 105}, |
| 1159 |
{243, 97}, |
| 1160 |
{243, 92}, |
| 1161 |
{211, 106}, |
| 1162 |
{211, 100}, |
| 1163 |
{179, 120}, |
| 1164 |
{179, 113}, |
| 1165 |
{179, 107}, |
| 1166 |
{147, 125}, |
| 1167 |
{147, 119}, |
| 1168 |
{147, 112}, |
| 1169 |
{147, 106}, |
| 1170 |
{147, 101}, |
| 1171 |
{147, 97}, |
| 1172 |
{147, 91}, |
| 1173 |
{115, 107}, |
| 1174 |
{235, 121}, |
| 1175 |
{235, 115}, |
| 1176 |
{235, 109}, |
| 1177 |
{203, 127}, |
| 1178 |
{203, 121}, |
| 1179 |
{203, 115}, |
| 1180 |
{203, 108}, |
| 1181 |
{203, 102}, |
| 1182 |
{203, 96}, |
| 1183 |
{203, 92}, |
| 1184 |
{171, 110}, |
| 1185 |
{171, 104}, |
| 1186 |
{171, 98}, |
| 1187 |
{139, 116}, |
| 1188 |
{227, 125}, |
| 1189 |
{227, 119}, |
| 1190 |
{227, 113}, |
| 1191 |
{227, 107}, |
| 1192 |
{227, 101}, |
| 1193 |
{227, 96}, |
| 1194 |
{195, 113}, |
| 1195 |
{195, 106}, |
| 1196 |
{195, 102}, |
| 1197 |
{195, 95}, |
| 1198 |
{163, 113}, |
| 1199 |
{163, 106}, |
| 1200 |
{163, 102}, |
| 1201 |
{163, 95}, |
| 1202 |
{131, 113}, |
| 1203 |
{131, 106}, |
| 1204 |
{131, 102}, |
| 1205 |
{131, 95}, |
| 1206 |
{99, 113}, |
| 1207 |
{99, 106}, |
| 1208 |
{99, 102}, |
| 1209 |
{99, 95}, |
| 1210 |
{67, 113}, |
| 1211 |
{67, 106}, |
| 1212 |
{67, 102}, |
| 1213 |
{67, 95}, |
| 1214 |
{35, 113}, |
| 1215 |
{35, 106}, |
| 1216 |
{35, 102}, |
| 1217 |
{35, 95}, |
| 1218 |
{3, 113}, |
| 1219 |
{3, 106}, |
| 1220 |
{3, 102}, |
| 1221 |
{3, 95} /* 2.4 GHz, lowest power */ |
| 1222 |
}, |
| 1223 |
{ |
| 1224 |
{251, 127}, /* 5.x GHz, highest power */ |
| 1225 |
{251, 120}, |
| 1226 |
{251, 114}, |
| 1227 |
{219, 119}, |
| 1228 |
{219, 101}, |
| 1229 |
{187, 113}, |
| 1230 |
{187, 102}, |
| 1231 |
{155, 114}, |
| 1232 |
{155, 103}, |
| 1233 |
{123, 117}, |
| 1234 |
{123, 107}, |
| 1235 |
{123, 99}, |
| 1236 |
{123, 92}, |
| 1237 |
{91, 108}, |
| 1238 |
{59, 125}, |
| 1239 |
{59, 118}, |
| 1240 |
{59, 109}, |
| 1241 |
{59, 102}, |
| 1242 |
{59, 96}, |
| 1243 |
{59, 90}, |
| 1244 |
{27, 104}, |
| 1245 |
{27, 98}, |
| 1246 |
{27, 92}, |
| 1247 |
{115, 118}, |
| 1248 |
{115, 111}, |
| 1249 |
{115, 104}, |
| 1250 |
{83, 126}, |
| 1251 |
{83, 121}, |
| 1252 |
{83, 113}, |
| 1253 |
{83, 105}, |
| 1254 |
{83, 99}, |
| 1255 |
{51, 118}, |
| 1256 |
{51, 111}, |
| 1257 |
{51, 104}, |
| 1258 |
{51, 98}, |
| 1259 |
{19, 116}, |
| 1260 |
{19, 109}, |
| 1261 |
{19, 102}, |
| 1262 |
{19, 98}, |
| 1263 |
{19, 93}, |
| 1264 |
{171, 113}, |
| 1265 |
{171, 107}, |
| 1266 |
{171, 99}, |
| 1267 |
{139, 120}, |
| 1268 |
{139, 113}, |
| 1269 |
{139, 107}, |
| 1270 |
{139, 99}, |
| 1271 |
{107, 120}, |
| 1272 |
{107, 113}, |
| 1273 |
{107, 107}, |
| 1274 |
{107, 99}, |
| 1275 |
{75, 120}, |
| 1276 |
{75, 113}, |
| 1277 |
{75, 107}, |
| 1278 |
{75, 99}, |
| 1279 |
{43, 120}, |
| 1280 |
{43, 113}, |
| 1281 |
{43, 107}, |
| 1282 |
{43, 99}, |
| 1283 |
{11, 120}, |
| 1284 |
{11, 113}, |
| 1285 |
{11, 107}, |
| 1286 |
{11, 99}, |
| 1287 |
{131, 107}, |
| 1288 |
{131, 99}, |
| 1289 |
{99, 120}, |
| 1290 |
{99, 113}, |
| 1291 |
{99, 107}, |
| 1292 |
{99, 99}, |
| 1293 |
{67, 120}, |
| 1294 |
{67, 113}, |
| 1295 |
{67, 107}, |
| 1296 |
{67, 99}, |
| 1297 |
{35, 120}, |
| 1298 |
{35, 113}, |
| 1299 |
{35, 107}, |
| 1300 |
{35, 99}, |
| 1301 |
{3, 120} /* 5.x GHz, lowest power */ |
| 1302 |
} |
| 1303 |
}; |
| 1304 |
|
| 1305 |
static inline u8 |
| 1306 |
il3945_hw_reg_fix_power_idx(int idx) |
| 1307 |
{ |
| 1308 |
if (idx < 0) |
| 1309 |
return 0; |
| 1310 |
if (idx >= IL_MAX_GAIN_ENTRIES) |
| 1311 |
return IL_MAX_GAIN_ENTRIES - 1; |
| 1312 |
return (u8) idx; |
| 1313 |
} |
| 1314 |
|
| 1315 |
/* Kick off thermal recalibration check every 60 seconds */ |
| 1316 |
#define REG_RECALIB_PERIOD (60) |
| 1317 |
|
| 1318 |
/* |
| 1319 |
* il3945_hw_reg_set_scan_power - Set Tx power for scan probe requests |
| 1320 |
* |
| 1321 |
* Set (in our channel info database) the direct scan Tx power for 1 Mbit (CCK) |
| 1322 |
* or 6 Mbit (OFDM) rates. |
| 1323 |
*/ |
| 1324 |
static void |
| 1325 |
il3945_hw_reg_set_scan_power(struct il_priv *il, u32 scan_tbl_idx, s32 rate_idx, |
| 1326 |
const s8 *clip_pwrs, |
| 1327 |
struct il_channel_info *ch_info, int band_idx) |
| 1328 |
{ |
| 1329 |
struct il3945_scan_power_info *scan_power_info; |
| 1330 |
s8 power; |
| 1331 |
u8 power_idx; |
| 1332 |
|
| 1333 |
scan_power_info = &ch_info->scan_pwr_info[scan_tbl_idx]; |
| 1334 |
|
| 1335 |
/* use this channel group's 6Mbit clipping/saturation pwr, |
| 1336 |
* but cap at regulatory scan power restriction (set during init |
| 1337 |
* based on eeprom channel data) for this channel. */ |
| 1338 |
power = min(ch_info->scan_power, clip_pwrs[RATE_6M_IDX_TBL]); |
| 1339 |
|
| 1340 |
power = min(power, il->tx_power_user_lmt); |
| 1341 |
scan_power_info->requested_power = power; |
| 1342 |
|
| 1343 |
/* find difference between new scan *power* and current "normal" |
| 1344 |
* Tx *power* for 6Mb. Use this difference (x2) to adjust the |
| 1345 |
* current "normal" temperature-compensated Tx power *idx* for |
| 1346 |
* this rate (1Mb or 6Mb) to yield new temp-compensated scan power |
| 1347 |
* *idx*. */ |
| 1348 |
power_idx = |
| 1349 |
ch_info->power_info[rate_idx].power_table_idx - (power - |
| 1350 |
ch_info-> |
| 1351 |
power_info |
| 1352 |
[RATE_6M_IDX_TBL]. |
| 1353 |
requested_power) * |
| 1354 |
2; |
| 1355 |
|
| 1356 |
/* store reference idx that we use when adjusting *all* scan |
| 1357 |
* powers. So we can accommodate user (all channel) or spectrum |
| 1358 |
* management (single channel) power changes "between" temperature |
| 1359 |
* feedback compensation procedures. |
| 1360 |
* don't force fit this reference idx into gain table; it may be a |
| 1361 |
* negative number. This will help avoid errors when we're at |
| 1362 |
* the lower bounds (highest gains, for warmest temperatures) |
| 1363 |
* of the table. */ |
| 1364 |
|
| 1365 |
/* don't exceed table bounds for "real" setting */ |
| 1366 |
power_idx = il3945_hw_reg_fix_power_idx(power_idx); |
| 1367 |
|
| 1368 |
scan_power_info->power_table_idx = power_idx; |
| 1369 |
scan_power_info->tpc.tx_gain = |
| 1370 |
power_gain_table[band_idx][power_idx].tx_gain; |
| 1371 |
scan_power_info->tpc.dsp_atten = |
| 1372 |
power_gain_table[band_idx][power_idx].dsp_atten; |
| 1373 |
} |
| 1374 |
|
| 1375 |
/* |
| 1376 |
* il3945_send_tx_power - fill in Tx Power command with gain settings |
| 1377 |
* |
| 1378 |
* Configures power settings for all rates for the current channel, |
| 1379 |
* using values from channel info struct, and send to NIC |
| 1380 |
*/ |
| 1381 |
static int |
| 1382 |
il3945_send_tx_power(struct il_priv *il) |
| 1383 |
{ |
| 1384 |
int rate_idx, i; |
| 1385 |
const struct il_channel_info *ch_info = NULL; |
| 1386 |
struct il3945_txpowertable_cmd txpower = { |
| 1387 |
.channel = il->active.channel, |
| 1388 |
}; |
| 1389 |
u16 chan; |
| 1390 |
|
| 1391 |
if (WARN_ONCE |
| 1392 |
(test_bit(S_SCAN_HW, &il->status), |
| 1393 |
"TX Power requested while scanning!\n")) |
| 1394 |
return -EAGAIN; |
| 1395 |
|
| 1396 |
chan = le16_to_cpu(il->active.channel); |
| 1397 |
|
| 1398 |
txpower.band = (il->band == NL80211_BAND_5GHZ) ? 0 : 1; |
| 1399 |
ch_info = il_get_channel_info(il, il->band, chan); |
| 1400 |
if (!ch_info) { |
| 1401 |
IL_ERR("Failed to get channel info for channel %d [%d]\n", chan, |
| 1402 |
il->band); |
| 1403 |
return -EINVAL; |
| 1404 |
} |
| 1405 |
|
| 1406 |
if (!il_is_channel_valid(ch_info)) { |
| 1407 |
D_POWER("Not calling TX_PWR_TBL_CMD on " "non-Tx channel.\n"); |
| 1408 |
return 0; |
| 1409 |
} |
| 1410 |
|
| 1411 |
/* fill cmd with power settings for all rates for current channel */ |
| 1412 |
/* Fill OFDM rate */ |
| 1413 |
for (rate_idx = IL_FIRST_OFDM_RATE, i = 0; |
| 1414 |
rate_idx <= IL39_LAST_OFDM_RATE; rate_idx++, i++) { |
| 1415 |
|
| 1416 |
txpower.power[i].tpc = ch_info->power_info[i].tpc; |
| 1417 |
txpower.power[i].rate = il3945_rates[rate_idx].plcp; |
| 1418 |
|
| 1419 |
D_POWER("ch %d:%d rf %d dsp %3d rate code 0x%02x\n", |
| 1420 |
le16_to_cpu(txpower.channel), txpower.band, |
| 1421 |
txpower.power[i].tpc.tx_gain, |
| 1422 |
txpower.power[i].tpc.dsp_atten, txpower.power[i].rate); |
| 1423 |
} |
| 1424 |
/* Fill CCK rates */ |
| 1425 |
for (rate_idx = IL_FIRST_CCK_RATE; rate_idx <= IL_LAST_CCK_RATE; |
| 1426 |
rate_idx++, i++) { |
| 1427 |
txpower.power[i].tpc = ch_info->power_info[i].tpc; |
| 1428 |
txpower.power[i].rate = il3945_rates[rate_idx].plcp; |
| 1429 |
|
| 1430 |
D_POWER("ch %d:%d rf %d dsp %3d rate code 0x%02x\n", |
| 1431 |
le16_to_cpu(txpower.channel), txpower.band, |
| 1432 |
txpower.power[i].tpc.tx_gain, |
| 1433 |
txpower.power[i].tpc.dsp_atten, txpower.power[i].rate); |
| 1434 |
} |
| 1435 |
|
| 1436 |
return il_send_cmd_pdu(il, C_TX_PWR_TBL, |
| 1437 |
sizeof(struct il3945_txpowertable_cmd), |
| 1438 |
&txpower); |
| 1439 |
|
| 1440 |
} |
| 1441 |
|
| 1442 |
/* |
| 1443 |
* il3945_hw_reg_set_new_power - Configures power tables at new levels |
| 1444 |
* @ch_info: Channel to update. Uses power_info.requested_power. |
| 1445 |
* |
| 1446 |
* Replace requested_power and base_power_idx ch_info fields for |
| 1447 |
* one channel. |
| 1448 |
* |
| 1449 |
* Called if user or spectrum management changes power preferences. |
| 1450 |
* Takes into account h/w and modulation limitations (clip power). |
| 1451 |
* |
| 1452 |
* This does *not* send anything to NIC, just sets up ch_info for one channel. |
| 1453 |
* |
| 1454 |
* NOTE: reg_compensate_for_temperature_dif() *must* be run after this to |
| 1455 |
* properly fill out the scan powers, and actual h/w gain settings, |
| 1456 |
* and send changes to NIC |
| 1457 |
*/ |
| 1458 |
static int |
| 1459 |
il3945_hw_reg_set_new_power(struct il_priv *il, struct il_channel_info *ch_info) |
| 1460 |
{ |
| 1461 |
struct il3945_channel_power_info *power_info; |
| 1462 |
int power_changed = 0; |
| 1463 |
int i; |
| 1464 |
const s8 *clip_pwrs; |
| 1465 |
int power; |
| 1466 |
|
| 1467 |
/* Get this chnlgrp's rate-to-max/clip-powers table */ |
| 1468 |
clip_pwrs = il->_3945.clip_groups[ch_info->group_idx].clip_powers; |
| 1469 |
|
| 1470 |
/* Get this channel's rate-to-current-power settings table */ |
| 1471 |
power_info = ch_info->power_info; |
| 1472 |
|
| 1473 |
/* update OFDM Txpower settings */ |
| 1474 |
for (i = RATE_6M_IDX_TBL; i <= RATE_54M_IDX_TBL; i++, ++power_info) { |
| 1475 |
int delta_idx; |
| 1476 |
|
| 1477 |
/* limit new power to be no more than h/w capability */ |
| 1478 |
power = min(ch_info->curr_txpow, clip_pwrs[i]); |
| 1479 |
if (power == power_info->requested_power) |
| 1480 |
continue; |
| 1481 |
|
| 1482 |
/* find difference between old and new requested powers, |
| 1483 |
* update base (non-temp-compensated) power idx */ |
| 1484 |
delta_idx = (power - power_info->requested_power) * 2; |
| 1485 |
power_info->base_power_idx -= delta_idx; |
| 1486 |
|
| 1487 |
/* save new requested power value */ |
| 1488 |
power_info->requested_power = power; |
| 1489 |
|
| 1490 |
power_changed = 1; |
| 1491 |
} |
| 1492 |
|
| 1493 |
/* update CCK Txpower settings, based on OFDM 12M setting ... |
| 1494 |
* ... all CCK power settings for a given channel are the *same*. */ |
| 1495 |
if (power_changed) { |
| 1496 |
power = |
| 1497 |
ch_info->power_info[RATE_12M_IDX_TBL].requested_power + |
| 1498 |
IL_CCK_FROM_OFDM_POWER_DIFF; |
| 1499 |
|
| 1500 |
/* do all CCK rates' il3945_channel_power_info structures */ |
| 1501 |
for (i = RATE_1M_IDX_TBL; i <= RATE_11M_IDX_TBL; i++) { |
| 1502 |
power_info->requested_power = power; |
| 1503 |
power_info->base_power_idx = |
| 1504 |
ch_info->power_info[RATE_12M_IDX_TBL]. |
| 1505 |
base_power_idx + IL_CCK_FROM_OFDM_IDX_DIFF; |
| 1506 |
++power_info; |
| 1507 |
} |
| 1508 |
} |
| 1509 |
|
| 1510 |
return 0; |
| 1511 |
} |
| 1512 |
|
| 1513 |
/* |
| 1514 |
* il3945_hw_reg_get_ch_txpower_limit - returns new power limit for channel |
| 1515 |
* |
| 1516 |
* NOTE: Returned power limit may be less (but not more) than requested, |
| 1517 |
* based strictly on regulatory (eeprom and spectrum mgt) limitations |
| 1518 |
* (no consideration for h/w clipping limitations). |
| 1519 |
*/ |
| 1520 |
static int |
| 1521 |
il3945_hw_reg_get_ch_txpower_limit(struct il_channel_info *ch_info) |
| 1522 |
{ |
| 1523 |
s8 max_power; |
| 1524 |
|
| 1525 |
#if 0 |
| 1526 |
/* if we're using TGd limits, use lower of TGd or EEPROM */ |
| 1527 |
if (ch_info->tgd_data.max_power != 0) |
| 1528 |
max_power = |
| 1529 |
min(ch_info->tgd_data.max_power, |
| 1530 |
ch_info->eeprom.max_power_avg); |
| 1531 |
|
| 1532 |
/* else just use EEPROM limits */ |
| 1533 |
else |
| 1534 |
#endif |
| 1535 |
max_power = ch_info->eeprom.max_power_avg; |
| 1536 |
|
| 1537 |
return min(max_power, ch_info->max_power_avg); |
| 1538 |
} |
| 1539 |
|
| 1540 |
/* |
| 1541 |
* il3945_hw_reg_comp_txpower_temp - Compensate for temperature |
| 1542 |
* |
| 1543 |
* Compensate txpower settings of *all* channels for temperature. |
| 1544 |
* This only accounts for the difference between current temperature |
| 1545 |
* and the factory calibration temperatures, and bases the new settings |
| 1546 |
* on the channel's base_power_idx. |
| 1547 |
* |
| 1548 |
* If RxOn is "associated", this sends the new Txpower to NIC! |
| 1549 |
*/ |
| 1550 |
static int |
| 1551 |
il3945_hw_reg_comp_txpower_temp(struct il_priv *il) |
| 1552 |
{ |
| 1553 |
struct il_channel_info *ch_info = NULL; |
| 1554 |
struct il3945_eeprom *eeprom = (struct il3945_eeprom *)il->eeprom; |
| 1555 |
int delta_idx; |
| 1556 |
const s8 *clip_pwrs; /* array of h/w max power levels for each rate */ |
| 1557 |
u8 a_band; |
| 1558 |
u8 rate_idx; |
| 1559 |
u8 scan_tbl_idx; |
| 1560 |
u8 i; |
| 1561 |
int ref_temp; |
| 1562 |
int temperature = il->temperature; |
| 1563 |
|
| 1564 |
if (il->disable_tx_power_cal || test_bit(S_SCANNING, &il->status)) { |
| 1565 |
/* do not perform tx power calibration */ |
| 1566 |
return 0; |
| 1567 |
} |
| 1568 |
/* set up new Tx power info for each and every channel, 2.4 and 5.x */ |
| 1569 |
for (i = 0; i < il->channel_count; i++) { |
| 1570 |
ch_info = &il->channel_info[i]; |
| 1571 |
a_band = il_is_channel_a_band(ch_info); |
| 1572 |
|
| 1573 |
/* Get this chnlgrp's factory calibration temperature */ |
| 1574 |
ref_temp = (s16) eeprom->groups[ch_info->group_idx].temperature; |
| 1575 |
|
| 1576 |
/* get power idx adjustment based on current and factory |
| 1577 |
* temps */ |
| 1578 |
delta_idx = |
| 1579 |
il3945_hw_reg_adjust_power_by_temp(temperature, ref_temp); |
| 1580 |
|
| 1581 |
/* set tx power value for all rates, OFDM and CCK */ |
| 1582 |
for (rate_idx = 0; rate_idx < RATE_COUNT_3945; rate_idx++) { |
| 1583 |
int power_idx = |
| 1584 |
ch_info->power_info[rate_idx].base_power_idx; |
| 1585 |
|
| 1586 |
/* temperature compensate */ |
| 1587 |
power_idx += delta_idx; |
| 1588 |
|
| 1589 |
/* stay within table range */ |
| 1590 |
power_idx = il3945_hw_reg_fix_power_idx(power_idx); |
| 1591 |
ch_info->power_info[rate_idx].power_table_idx = |
| 1592 |
(u8) power_idx; |
| 1593 |
ch_info->power_info[rate_idx].tpc = |
| 1594 |
power_gain_table[a_band][power_idx]; |
| 1595 |
} |
| 1596 |
|
| 1597 |
/* Get this chnlgrp's rate-to-max/clip-powers table */ |
| 1598 |
clip_pwrs = |
| 1599 |
il->_3945.clip_groups[ch_info->group_idx].clip_powers; |
| 1600 |
|
| 1601 |
/* set scan tx power, 1Mbit for CCK, 6Mbit for OFDM */ |
| 1602 |
for (scan_tbl_idx = 0; scan_tbl_idx < IL_NUM_SCAN_RATES; |
| 1603 |
scan_tbl_idx++) { |
| 1604 |
s32 actual_idx = |
| 1605 |
(scan_tbl_idx == |
| 1606 |
0) ? RATE_1M_IDX_TBL : RATE_6M_IDX_TBL; |
| 1607 |
il3945_hw_reg_set_scan_power(il, scan_tbl_idx, |
| 1608 |
actual_idx, clip_pwrs, |
| 1609 |
ch_info, a_band); |
| 1610 |
} |
| 1611 |
} |
| 1612 |
|
| 1613 |
/* send Txpower command for current channel to ucode */ |
| 1614 |
return il->ops->send_tx_power(il); |
| 1615 |
} |
| 1616 |
|
| 1617 |
int |
| 1618 |
il3945_hw_reg_set_txpower(struct il_priv *il, s8 power) |
| 1619 |
{ |
| 1620 |
struct il_channel_info *ch_info; |
| 1621 |
s8 max_power; |
| 1622 |
u8 i; |
| 1623 |
|
| 1624 |
if (il->tx_power_user_lmt == power) { |
| 1625 |
D_POWER("Requested Tx power same as current " "limit: %ddBm.\n", |
| 1626 |
power); |
| 1627 |
return 0; |
| 1628 |
} |
| 1629 |
|
| 1630 |
D_POWER("Setting upper limit clamp to %ddBm.\n", power); |
| 1631 |
il->tx_power_user_lmt = power; |
| 1632 |
|
| 1633 |
/* set up new Tx powers for each and every channel, 2.4 and 5.x */ |
| 1634 |
|
| 1635 |
for (i = 0; i < il->channel_count; i++) { |
| 1636 |
ch_info = &il->channel_info[i]; |
| 1637 |
|
| 1638 |
/* find minimum power of all user and regulatory constraints |
| 1639 |
* (does not consider h/w clipping limitations) */ |
| 1640 |
max_power = il3945_hw_reg_get_ch_txpower_limit(ch_info); |
| 1641 |
max_power = min(power, max_power); |
| 1642 |
if (max_power != ch_info->curr_txpow) { |
| 1643 |
ch_info->curr_txpow = max_power; |
| 1644 |
|
| 1645 |
/* this considers the h/w clipping limitations */ |
| 1646 |
il3945_hw_reg_set_new_power(il, ch_info); |
| 1647 |
} |
| 1648 |
} |
| 1649 |
|
| 1650 |
/* update txpower settings for all channels, |
| 1651 |
* send to NIC if associated. */ |
| 1652 |
il3945_is_temp_calib_needed(il); |
| 1653 |
il3945_hw_reg_comp_txpower_temp(il); |
| 1654 |
|
| 1655 |
return 0; |
| 1656 |
} |
| 1657 |
|
| 1658 |
static int |
| 1659 |
il3945_send_rxon_assoc(struct il_priv *il) |
| 1660 |
{ |
| 1661 |
int rc = 0; |
| 1662 |
struct il_rx_pkt *pkt; |
| 1663 |
struct il3945_rxon_assoc_cmd rxon_assoc; |
| 1664 |
struct il_host_cmd cmd = { |
| 1665 |
.id = C_RXON_ASSOC, |
| 1666 |
.len = sizeof(rxon_assoc), |
| 1667 |
.flags = CMD_WANT_SKB, |
| 1668 |
.data = &rxon_assoc, |
| 1669 |
}; |
| 1670 |
const struct il_rxon_cmd *rxon1 = &il->staging; |
| 1671 |
const struct il_rxon_cmd *rxon2 = &il->active; |
| 1672 |
|
| 1673 |
if (rxon1->flags == rxon2->flags && |
| 1674 |
rxon1->filter_flags == rxon2->filter_flags && |
| 1675 |
rxon1->cck_basic_rates == rxon2->cck_basic_rates && |
| 1676 |
rxon1->ofdm_basic_rates == rxon2->ofdm_basic_rates) { |
| 1677 |
D_INFO("Using current RXON_ASSOC. Not resending.\n"); |
| 1678 |
return 0; |
| 1679 |
} |
| 1680 |
|
| 1681 |
rxon_assoc.flags = il->staging.flags; |
| 1682 |
rxon_assoc.filter_flags = il->staging.filter_flags; |
| 1683 |
rxon_assoc.ofdm_basic_rates = il->staging.ofdm_basic_rates; |
| 1684 |
rxon_assoc.cck_basic_rates = il->staging.cck_basic_rates; |
| 1685 |
rxon_assoc.reserved = 0; |
| 1686 |
|
| 1687 |
rc = il_send_cmd_sync(il, &cmd); |
| 1688 |
if (rc) |
| 1689 |
return rc; |
| 1690 |
|
| 1691 |
pkt = (struct il_rx_pkt *)cmd.reply_page; |
| 1692 |
if (pkt->hdr.flags & IL_CMD_FAILED_MSK) { |
| 1693 |
IL_ERR("Bad return from C_RXON_ASSOC command\n"); |
| 1694 |
rc = -EIO; |
| 1695 |
} |
| 1696 |
|
| 1697 |
il_free_pages(il, cmd.reply_page); |
| 1698 |
|
| 1699 |
return rc; |
| 1700 |
} |
| 1701 |
|
| 1702 |
/* |
| 1703 |
* il3945_commit_rxon - commit staging_rxon to hardware |
| 1704 |
* |
| 1705 |
* The RXON command in staging_rxon is committed to the hardware and |
| 1706 |
* the active_rxon structure is updated with the new data. This |
| 1707 |
* function correctly transitions out of the RXON_ASSOC_MSK state if |
| 1708 |
* a HW tune is required based on the RXON structure changes. |
| 1709 |
*/ |
| 1710 |
int |
| 1711 |
il3945_commit_rxon(struct il_priv *il) |
| 1712 |
{ |
| 1713 |
/* cast away the const for active_rxon in this function */ |
| 1714 |
struct il3945_rxon_cmd *active_rxon = (void *)&il->active; |
| 1715 |
struct il3945_rxon_cmd *staging_rxon = (void *)&il->staging; |
| 1716 |
int rc = 0; |
| 1717 |
bool new_assoc = !!(staging_rxon->filter_flags & RXON_FILTER_ASSOC_MSK); |
| 1718 |
|
| 1719 |
if (test_bit(S_EXIT_PENDING, &il->status)) |
| 1720 |
return -EINVAL; |
| 1721 |
|
| 1722 |
if (!il_is_alive(il)) |
| 1723 |
return -1; |
| 1724 |
|
| 1725 |
/* always get timestamp with Rx frame */ |
| 1726 |
staging_rxon->flags |= RXON_FLG_TSF2HOST_MSK; |
| 1727 |
|
| 1728 |
/* select antenna */ |
| 1729 |
staging_rxon->flags &= ~(RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_SEL_MSK); |
| 1730 |
staging_rxon->flags |= il3945_get_antenna_flags(il); |
| 1731 |
|
| 1732 |
rc = il_check_rxon_cmd(il); |
| 1733 |
if (rc) { |
| 1734 |
IL_ERR("Invalid RXON configuration. Not committing.\n"); |
| 1735 |
return -EINVAL; |
| 1736 |
} |
| 1737 |
|
| 1738 |
/* If we don't need to send a full RXON, we can use |
| 1739 |
* il3945_rxon_assoc_cmd which is used to reconfigure filter |
| 1740 |
* and other flags for the current radio configuration. */ |
| 1741 |
if (!il_full_rxon_required(il)) { |
| 1742 |
rc = il_send_rxon_assoc(il); |
| 1743 |
if (rc) { |
| 1744 |
IL_ERR("Error setting RXON_ASSOC " |
| 1745 |
"configuration (%d).\n", rc); |
| 1746 |
return rc; |
| 1747 |
} |
| 1748 |
|
| 1749 |
memcpy(active_rxon, staging_rxon, sizeof(*active_rxon)); |
| 1750 |
/* |
| 1751 |
* We do not commit tx power settings while channel changing, |
| 1752 |
* do it now if tx power changed. |
| 1753 |
*/ |
| 1754 |
il_set_tx_power(il, il->tx_power_next, false); |
| 1755 |
return 0; |
| 1756 |
} |
| 1757 |
|
| 1758 |
/* If we are currently associated and the new config requires |
| 1759 |
* an RXON_ASSOC and the new config wants the associated mask enabled, |
| 1760 |
* we must clear the associated from the active configuration |
| 1761 |
* before we apply the new config */ |
| 1762 |
if (il_is_associated(il) && new_assoc) { |
| 1763 |
D_INFO("Toggling associated bit on current RXON\n"); |
| 1764 |
active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK; |
| 1765 |
|
| 1766 |
/* |
| 1767 |
* reserved4 and 5 could have been filled by the iwlcore code. |
| 1768 |
* Let's clear them before pushing to the 3945. |
| 1769 |
*/ |
| 1770 |
active_rxon->reserved4 = 0; |
| 1771 |
active_rxon->reserved5 = 0; |
| 1772 |
rc = il_send_cmd_pdu(il, C_RXON, sizeof(struct il3945_rxon_cmd), |
| 1773 |
&il->active); |
| 1774 |
|
| 1775 |
/* If the mask clearing failed then we set |
| 1776 |
* active_rxon back to what it was previously */ |
| 1777 |
if (rc) { |
| 1778 |
active_rxon->filter_flags |= RXON_FILTER_ASSOC_MSK; |
| 1779 |
IL_ERR("Error clearing ASSOC_MSK on current " |
| 1780 |
"configuration (%d).\n", rc); |
| 1781 |
return rc; |
| 1782 |
} |
| 1783 |
il_clear_ucode_stations(il); |
| 1784 |
il_restore_stations(il); |
| 1785 |
} |
| 1786 |
|
| 1787 |
D_INFO("Sending RXON\n" "* with%s RXON_FILTER_ASSOC_MSK\n" |
| 1788 |
"* channel = %d\n" "* bssid = %pM\n", (new_assoc ? "" : "out"), |
| 1789 |
le16_to_cpu(staging_rxon->channel), staging_rxon->bssid_addr); |
| 1790 |
|
| 1791 |
/* |
| 1792 |
* reserved4 and 5 could have been filled by the iwlcore code. |
| 1793 |
* Let's clear them before pushing to the 3945. |
| 1794 |
*/ |
| 1795 |
staging_rxon->reserved4 = 0; |
| 1796 |
staging_rxon->reserved5 = 0; |
| 1797 |
|
| 1798 |
il_set_rxon_hwcrypto(il, !il3945_mod_params.sw_crypto); |
| 1799 |
|
| 1800 |
/* Apply the new configuration */ |
| 1801 |
rc = il_send_cmd_pdu(il, C_RXON, sizeof(struct il3945_rxon_cmd), |
| 1802 |
staging_rxon); |
| 1803 |
if (rc) { |
| 1804 |
IL_ERR("Error setting new configuration (%d).\n", rc); |
| 1805 |
return rc; |
| 1806 |
} |
| 1807 |
|
| 1808 |
memcpy(active_rxon, staging_rxon, sizeof(*active_rxon)); |
| 1809 |
|
| 1810 |
if (!new_assoc) { |
| 1811 |
il_clear_ucode_stations(il); |
| 1812 |
il_restore_stations(il); |
| 1813 |
} |
| 1814 |
|
| 1815 |
/* If we issue a new RXON command which required a tune then we must |
| 1816 |
* send a new TXPOWER command or we won't be able to Tx any frames */ |
| 1817 |
rc = il_set_tx_power(il, il->tx_power_next, true); |
| 1818 |
if (rc) { |
| 1819 |
IL_ERR("Error setting Tx power (%d).\n", rc); |
| 1820 |
return rc; |
| 1821 |
} |
| 1822 |
|
| 1823 |
/* Init the hardware's rate fallback order based on the band */ |
| 1824 |
rc = il3945_init_hw_rate_table(il); |
| 1825 |
if (rc) { |
| 1826 |
IL_ERR("Error setting HW rate table: %02X\n", rc); |
| 1827 |
return -EIO; |
| 1828 |
} |
| 1829 |
|
| 1830 |
return 0; |
| 1831 |
} |
| 1832 |
|
| 1833 |
/* |
| 1834 |
* il3945_reg_txpower_periodic - called when time to check our temperature. |
| 1835 |
* |
| 1836 |
* -- reset periodic timer |
| 1837 |
* -- see if temp has changed enough to warrant re-calibration ... if so: |
| 1838 |
* -- correct coeffs for temp (can reset temp timer) |
| 1839 |
* -- save this temp as "last", |
| 1840 |
* -- send new set of gain settings to NIC |
| 1841 |
* NOTE: This should continue working, even when we're not associated, |
| 1842 |
* so we can keep our internal table of scan powers current. */ |
| 1843 |
void |
| 1844 |
il3945_reg_txpower_periodic(struct il_priv *il) |
| 1845 |
{ |
| 1846 |
/* This will kick in the "brute force" |
| 1847 |
* il3945_hw_reg_comp_txpower_temp() below */ |
| 1848 |
if (!il3945_is_temp_calib_needed(il)) |
| 1849 |
goto reschedule; |
| 1850 |
|
| 1851 |
/* Set up a new set of temp-adjusted TxPowers, send to NIC. |
| 1852 |
* This is based *only* on current temperature, |
| 1853 |
* ignoring any previous power measurements */ |
| 1854 |
il3945_hw_reg_comp_txpower_temp(il); |
| 1855 |
|
| 1856 |
reschedule: |
| 1857 |
queue_delayed_work(il->workqueue, &il->_3945.thermal_periodic, |
| 1858 |
REG_RECALIB_PERIOD * HZ); |
| 1859 |
} |
| 1860 |
|
| 1861 |
static void |
| 1862 |
il3945_bg_reg_txpower_periodic(struct work_struct *work) |
| 1863 |
{ |
| 1864 |
struct il_priv *il = container_of(work, struct il_priv, |
| 1865 |
_3945.thermal_periodic.work); |
| 1866 |
|
| 1867 |
mutex_lock(&il->mutex); |
| 1868 |
if (test_bit(S_EXIT_PENDING, &il->status) || il->txq == NULL) |
| 1869 |
goto out; |
| 1870 |
|
| 1871 |
il3945_reg_txpower_periodic(il); |
| 1872 |
out: |
| 1873 |
mutex_unlock(&il->mutex); |
| 1874 |
} |
| 1875 |
|
| 1876 |
/* |
| 1877 |
* il3945_hw_reg_get_ch_grp_idx - find the channel-group idx (0-4) for channel. |
| 1878 |
* |
| 1879 |
* This function is used when initializing channel-info structs. |
| 1880 |
* |
| 1881 |
* NOTE: These channel groups do *NOT* match the bands above! |
| 1882 |
* These channel groups are based on factory-tested channels; |
| 1883 |
* on A-band, EEPROM's "group frequency" entries represent the top |
| 1884 |
* channel in each group 1-4. Group 5 All B/G channels are in group 0. |
| 1885 |
*/ |
| 1886 |
static u16 |
| 1887 |
il3945_hw_reg_get_ch_grp_idx(struct il_priv *il, |
| 1888 |
const struct il_channel_info *ch_info) |
| 1889 |
{ |
| 1890 |
struct il3945_eeprom *eeprom = (struct il3945_eeprom *)il->eeprom; |
| 1891 |
struct il3945_eeprom_txpower_group *ch_grp = &eeprom->groups[0]; |
| 1892 |
u8 group; |
| 1893 |
u16 group_idx = 0; /* based on factory calib frequencies */ |
| 1894 |
u8 grp_channel; |
| 1895 |
|
| 1896 |
/* Find the group idx for the channel ... don't use idx 1(?) */ |
| 1897 |
if (il_is_channel_a_band(ch_info)) { |
| 1898 |
for (group = 1; group < 5; group++) { |
| 1899 |
grp_channel = ch_grp[group].group_channel; |
| 1900 |
if (ch_info->channel <= grp_channel) { |
| 1901 |
group_idx = group; |
| 1902 |
break; |
| 1903 |
} |
| 1904 |
} |
| 1905 |
/* group 4 has a few channels *above* its factory cal freq */ |
| 1906 |
if (group == 5) |
| 1907 |
group_idx = 4; |
| 1908 |
} else |
| 1909 |
group_idx = 0; /* 2.4 GHz, group 0 */ |
| 1910 |
|
| 1911 |
D_POWER("Chnl %d mapped to grp %d\n", ch_info->channel, group_idx); |
| 1912 |
return group_idx; |
| 1913 |
} |
| 1914 |
|
| 1915 |
/* |
| 1916 |
* il3945_hw_reg_get_matched_power_idx - Interpolate to get nominal idx |
| 1917 |
* |
| 1918 |
* Interpolate to get nominal (i.e. at factory calibration temperature) idx |
| 1919 |
* into radio/DSP gain settings table for requested power. |
| 1920 |
*/ |
| 1921 |
static int |
| 1922 |
il3945_hw_reg_get_matched_power_idx(struct il_priv *il, s8 requested_power, |
| 1923 |
s32 setting_idx, s32 *new_idx) |
| 1924 |
{ |
| 1925 |
const struct il3945_eeprom_txpower_group *chnl_grp = NULL; |
| 1926 |
struct il3945_eeprom *eeprom = (struct il3945_eeprom *)il->eeprom; |
| 1927 |
s32 idx0, idx1; |
| 1928 |
s32 power = 2 * requested_power; |
| 1929 |
s32 i; |
| 1930 |
const struct il3945_eeprom_txpower_sample *samples; |
| 1931 |
s32 gains0, gains1; |
| 1932 |
s32 res; |
| 1933 |
s32 denominator; |
| 1934 |
|
| 1935 |
chnl_grp = &eeprom->groups[setting_idx]; |
| 1936 |
samples = chnl_grp->samples; |
| 1937 |
for (i = 0; i < 5; i++) { |
| 1938 |
if (power == samples[i].power) { |
| 1939 |
*new_idx = samples[i].gain_idx; |
| 1940 |
return 0; |
| 1941 |
} |
| 1942 |
} |
| 1943 |
|
| 1944 |
if (power > samples[1].power) { |
| 1945 |
idx0 = 0; |
| 1946 |
idx1 = 1; |
| 1947 |
} else if (power > samples[2].power) { |
| 1948 |
idx0 = 1; |
| 1949 |
idx1 = 2; |
| 1950 |
} else if (power > samples[3].power) { |
| 1951 |
idx0 = 2; |
| 1952 |
idx1 = 3; |
| 1953 |
} else { |
| 1954 |
idx0 = 3; |
| 1955 |
idx1 = 4; |
| 1956 |
} |
| 1957 |
|
| 1958 |
denominator = (s32) samples[idx1].power - (s32) samples[idx0].power; |
| 1959 |
if (denominator == 0) |
| 1960 |
return -EINVAL; |
| 1961 |
gains0 = (s32) samples[idx0].gain_idx * (1 << 19); |
| 1962 |
gains1 = (s32) samples[idx1].gain_idx * (1 << 19); |
| 1963 |
res = |
| 1964 |
gains0 + (gains1 - gains0) * ((s32) power - |
| 1965 |
(s32) samples[idx0].power) / |
| 1966 |
denominator + (1 << 18); |
| 1967 |
*new_idx = res >> 19; |
| 1968 |
return 0; |
| 1969 |
} |
| 1970 |
|
| 1971 |
static void |
| 1972 |
il3945_hw_reg_init_channel_groups(struct il_priv *il) |
| 1973 |
{ |
| 1974 |
u32 i; |
| 1975 |
s32 rate_idx; |
| 1976 |
struct il3945_eeprom *eeprom = (struct il3945_eeprom *)il->eeprom; |
| 1977 |
const struct il3945_eeprom_txpower_group *group; |
| 1978 |
|
| 1979 |
D_POWER("Initializing factory calib info from EEPROM\n"); |
| 1980 |
|
| 1981 |
for (i = 0; i < IL_NUM_TX_CALIB_GROUPS; i++) { |
| 1982 |
s8 *clip_pwrs; /* table of power levels for each rate */ |
| 1983 |
s8 satur_pwr; /* saturation power for each chnl group */ |
| 1984 |
group = &eeprom->groups[i]; |
| 1985 |
|
| 1986 |
/* sanity check on factory saturation power value */ |
| 1987 |
if (group->saturation_power < 40) { |
| 1988 |
IL_WARN("Error: saturation power is %d, " |
| 1989 |
"less than minimum expected 40\n", |
| 1990 |
group->saturation_power); |
| 1991 |
return; |
| 1992 |
} |
| 1993 |
|
| 1994 |
/* |
| 1995 |
* Derive requested power levels for each rate, based on |
| 1996 |
* hardware capabilities (saturation power for band). |
| 1997 |
* Basic value is 3dB down from saturation, with further |
| 1998 |
* power reductions for highest 3 data rates. These |
| 1999 |
* backoffs provide headroom for high rate modulation |
| 2000 |
* power peaks, without too much distortion (clipping). |
| 2001 |
*/ |
| 2002 |
/* we'll fill in this array with h/w max power levels */ |
| 2003 |
clip_pwrs = (s8 *) il->_3945.clip_groups[i].clip_powers; |
| 2004 |
|
| 2005 |
/* divide factory saturation power by 2 to find -3dB level */ |
| 2006 |
satur_pwr = (s8) (group->saturation_power >> 1); |
| 2007 |
|
| 2008 |
/* fill in channel group's nominal powers for each rate */ |
| 2009 |
for (rate_idx = 0; rate_idx < RATE_COUNT_3945; |
| 2010 |
rate_idx++, clip_pwrs++) { |
| 2011 |
switch (rate_idx) { |
| 2012 |
case RATE_36M_IDX_TBL: |
| 2013 |
if (i == 0) /* B/G */ |
| 2014 |
*clip_pwrs = satur_pwr; |
| 2015 |
else /* A */ |
| 2016 |
*clip_pwrs = satur_pwr - 5; |
| 2017 |
break; |
| 2018 |
case RATE_48M_IDX_TBL: |
| 2019 |
if (i == 0) |
| 2020 |
*clip_pwrs = satur_pwr - 7; |
| 2021 |
else |
| 2022 |
*clip_pwrs = satur_pwr - 10; |
| 2023 |
break; |
| 2024 |
case RATE_54M_IDX_TBL: |
| 2025 |
if (i == 0) |
| 2026 |
*clip_pwrs = satur_pwr - 9; |
| 2027 |
else |
| 2028 |
*clip_pwrs = satur_pwr - 12; |
| 2029 |
break; |
| 2030 |
default: |
| 2031 |
*clip_pwrs = satur_pwr; |
| 2032 |
break; |
| 2033 |
} |
| 2034 |
} |
| 2035 |
} |
| 2036 |
} |
| 2037 |
|
| 2038 |
/* |
| 2039 |
* il3945_txpower_set_from_eeprom - Set channel power info based on EEPROM |
| 2040 |
* |
| 2041 |
* Second pass (during init) to set up il->channel_info |
| 2042 |
* |
| 2043 |
* Set up Tx-power settings in our channel info database for each VALID |
| 2044 |
* (for this geo/SKU) channel, at all Tx data rates, based on eeprom values |
| 2045 |
* and current temperature. |
| 2046 |
* |
| 2047 |
* Since this is based on current temperature (at init time), these values may |
| 2048 |
* not be valid for very long, but it gives us a starting/default point, |
| 2049 |
* and allows us to active (i.e. using Tx) scan. |
| 2050 |
* |
| 2051 |
* This does *not* write values to NIC, just sets up our internal table. |
| 2052 |
*/ |
| 2053 |
int |
| 2054 |
il3945_txpower_set_from_eeprom(struct il_priv *il) |
| 2055 |
{ |
| 2056 |
struct il_channel_info *ch_info = NULL; |
| 2057 |
struct il3945_channel_power_info *pwr_info; |
| 2058 |
struct il3945_eeprom *eeprom = (struct il3945_eeprom *)il->eeprom; |
| 2059 |
int delta_idx; |
| 2060 |
u8 rate_idx; |
| 2061 |
u8 scan_tbl_idx; |
| 2062 |
const s8 *clip_pwrs; /* array of power levels for each rate */ |
| 2063 |
u8 gain, dsp_atten; |
| 2064 |
s8 power; |
| 2065 |
u8 pwr_idx, base_pwr_idx, a_band; |
| 2066 |
u8 i; |
| 2067 |
int temperature; |
| 2068 |
|
| 2069 |
/* save temperature reference, |
| 2070 |
* so we can determine next time to calibrate */ |
| 2071 |
temperature = il3945_hw_reg_txpower_get_temperature(il); |
| 2072 |
il->last_temperature = temperature; |
| 2073 |
|
| 2074 |
il3945_hw_reg_init_channel_groups(il); |
| 2075 |
|
| 2076 |
/* initialize Tx power info for each and every channel, 2.4 and 5.x */ |
| 2077 |
for (i = 0, ch_info = il->channel_info; i < il->channel_count; |
| 2078 |
i++, ch_info++) { |
| 2079 |
a_band = il_is_channel_a_band(ch_info); |
| 2080 |
if (!il_is_channel_valid(ch_info)) |
| 2081 |
continue; |
| 2082 |
|
| 2083 |
/* find this channel's channel group (*not* "band") idx */ |
| 2084 |
ch_info->group_idx = il3945_hw_reg_get_ch_grp_idx(il, ch_info); |
| 2085 |
|
| 2086 |
/* Get this chnlgrp's rate->max/clip-powers table */ |
| 2087 |
clip_pwrs = |
| 2088 |
il->_3945.clip_groups[ch_info->group_idx].clip_powers; |
| 2089 |
|
| 2090 |
/* calculate power idx *adjustment* value according to |
| 2091 |
* diff between current temperature and factory temperature */ |
| 2092 |
delta_idx = |
| 2093 |
il3945_hw_reg_adjust_power_by_temp(temperature, |
| 2094 |
eeprom->groups[ch_info-> |
| 2095 |
group_idx]. |
| 2096 |
temperature); |
| 2097 |
|
| 2098 |
D_POWER("Delta idx for channel %d: %d [%d]\n", ch_info->channel, |
| 2099 |
delta_idx, temperature + IL_TEMP_CONVERT); |
| 2100 |
|
| 2101 |
/* set tx power value for all OFDM rates */ |
| 2102 |
for (rate_idx = 0; rate_idx < IL_OFDM_RATES; rate_idx++) { |
| 2103 |
s32 power_idx; |
| 2104 |
int rc; |
| 2105 |
|
| 2106 |
/* use channel group's clip-power table, |
| 2107 |
* but don't exceed channel's max power */ |
| 2108 |
s8 pwr = min(ch_info->max_power_avg, |
| 2109 |
clip_pwrs[rate_idx]); |
| 2110 |
|
| 2111 |
pwr_info = &ch_info->power_info[rate_idx]; |
| 2112 |
|
| 2113 |
/* get base (i.e. at factory-measured temperature) |
| 2114 |
* power table idx for this rate's power */ |
| 2115 |
rc = il3945_hw_reg_get_matched_power_idx(il, pwr, |
| 2116 |
ch_info-> |
| 2117 |
group_idx, |
| 2118 |
&power_idx); |
| 2119 |
if (rc) { |
| 2120 |
IL_ERR("Invalid power idx\n"); |
| 2121 |
return rc; |
| 2122 |
} |
| 2123 |
pwr_info->base_power_idx = (u8) power_idx; |
| 2124 |
|
| 2125 |
/* temperature compensate */ |
| 2126 |
power_idx += delta_idx; |
| 2127 |
|
| 2128 |
/* stay within range of gain table */ |
| 2129 |
power_idx = il3945_hw_reg_fix_power_idx(power_idx); |
| 2130 |
|
| 2131 |
/* fill 1 OFDM rate's il3945_channel_power_info struct */ |
| 2132 |
pwr_info->requested_power = pwr; |
| 2133 |
pwr_info->power_table_idx = (u8) power_idx; |
| 2134 |
pwr_info->tpc.tx_gain = |
| 2135 |
power_gain_table[a_band][power_idx].tx_gain; |
| 2136 |
pwr_info->tpc.dsp_atten = |
| 2137 |
power_gain_table[a_band][power_idx].dsp_atten; |
| 2138 |
} |
| 2139 |
|
| 2140 |
/* set tx power for CCK rates, based on OFDM 12 Mbit settings */ |
| 2141 |
pwr_info = &ch_info->power_info[RATE_12M_IDX_TBL]; |
| 2142 |
power = pwr_info->requested_power + IL_CCK_FROM_OFDM_POWER_DIFF; |
| 2143 |
pwr_idx = pwr_info->power_table_idx + IL_CCK_FROM_OFDM_IDX_DIFF; |
| 2144 |
base_pwr_idx = |
| 2145 |
pwr_info->base_power_idx + IL_CCK_FROM_OFDM_IDX_DIFF; |
| 2146 |
|
| 2147 |
/* stay within table range */ |
| 2148 |
pwr_idx = il3945_hw_reg_fix_power_idx(pwr_idx); |
| 2149 |
gain = power_gain_table[a_band][pwr_idx].tx_gain; |
| 2150 |
dsp_atten = power_gain_table[a_band][pwr_idx].dsp_atten; |
| 2151 |
|
| 2152 |
/* fill each CCK rate's il3945_channel_power_info structure |
| 2153 |
* NOTE: All CCK-rate Txpwrs are the same for a given chnl! |
| 2154 |
* NOTE: CCK rates start at end of OFDM rates! */ |
| 2155 |
for (rate_idx = 0; rate_idx < IL_CCK_RATES; rate_idx++) { |
| 2156 |
pwr_info = |
| 2157 |
&ch_info->power_info[rate_idx + IL_OFDM_RATES]; |
| 2158 |
pwr_info->requested_power = power; |
| 2159 |
pwr_info->power_table_idx = pwr_idx; |
| 2160 |
pwr_info->base_power_idx = base_pwr_idx; |
| 2161 |
pwr_info->tpc.tx_gain = gain; |
| 2162 |
pwr_info->tpc.dsp_atten = dsp_atten; |
| 2163 |
} |
| 2164 |
|
| 2165 |
/* set scan tx power, 1Mbit for CCK, 6Mbit for OFDM */ |
| 2166 |
for (scan_tbl_idx = 0; scan_tbl_idx < IL_NUM_SCAN_RATES; |
| 2167 |
scan_tbl_idx++) { |
| 2168 |
s32 actual_idx = |
| 2169 |
(scan_tbl_idx == |
| 2170 |
0) ? RATE_1M_IDX_TBL : RATE_6M_IDX_TBL; |
| 2171 |
il3945_hw_reg_set_scan_power(il, scan_tbl_idx, |
| 2172 |
actual_idx, clip_pwrs, |
| 2173 |
ch_info, a_band); |
| 2174 |
} |
| 2175 |
} |
| 2176 |
|
| 2177 |
return 0; |
| 2178 |
} |
| 2179 |
|
| 2180 |
int |
| 2181 |
il3945_hw_rxq_stop(struct il_priv *il) |
| 2182 |
{ |
| 2183 |
int ret; |
| 2184 |
|
| 2185 |
_il_wr(il, FH39_RCSR_CONFIG(0), 0); |
| 2186 |
ret = _il_poll_bit(il, FH39_RSSR_STATUS, |
| 2187 |
FH39_RSSR_CHNL0_RX_STATUS_CHNL_IDLE, |
| 2188 |
FH39_RSSR_CHNL0_RX_STATUS_CHNL_IDLE, |
| 2189 |
1000); |
| 2190 |
if (ret < 0) |
| 2191 |
IL_ERR("Can't stop Rx DMA.\n"); |
| 2192 |
|
| 2193 |
return 0; |
| 2194 |
} |
| 2195 |
|
| 2196 |
int |
| 2197 |
il3945_hw_tx_queue_init(struct il_priv *il, struct il_tx_queue *txq) |
| 2198 |
{ |
| 2199 |
int txq_id = txq->q.id; |
| 2200 |
|
| 2201 |
struct il3945_shared *shared_data = il->_3945.shared_virt; |
| 2202 |
|
| 2203 |
shared_data->tx_base_ptr[txq_id] = cpu_to_le32((u32) txq->q.dma_addr); |
| 2204 |
|
| 2205 |
il_wr(il, FH39_CBCC_CTRL(txq_id), 0); |
| 2206 |
il_wr(il, FH39_CBCC_BASE(txq_id), 0); |
| 2207 |
|
| 2208 |
il_wr(il, FH39_TCSR_CONFIG(txq_id), |
| 2209 |
FH39_TCSR_TX_CONFIG_REG_VAL_CIRQ_RTC_NOINT | |
| 2210 |
FH39_TCSR_TX_CONFIG_REG_VAL_MSG_MODE_TXF | |
| 2211 |
FH39_TCSR_TX_CONFIG_REG_VAL_CIRQ_HOST_IFTFD | |
| 2212 |
FH39_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_ENABLE_VAL | |
| 2213 |
FH39_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_ENABLE); |
| 2214 |
|
| 2215 |
/* fake read to flush all prev. writes */ |
| 2216 |
_il_rd(il, FH39_TSSR_CBB_BASE); |
| 2217 |
|
| 2218 |
return 0; |
| 2219 |
} |
| 2220 |
|
| 2221 |
/* |
| 2222 |
* HCMD utils |
| 2223 |
*/ |
| 2224 |
static u16 |
| 2225 |
il3945_get_hcmd_size(u8 cmd_id, u16 len) |
| 2226 |
{ |
| 2227 |
switch (cmd_id) { |
| 2228 |
case C_RXON: |
| 2229 |
return sizeof(struct il3945_rxon_cmd); |
| 2230 |
case C_POWER_TBL: |
| 2231 |
return sizeof(struct il3945_powertable_cmd); |
| 2232 |
default: |
| 2233 |
return len; |
| 2234 |
} |
| 2235 |
} |
| 2236 |
|
| 2237 |
static u16 |
| 2238 |
il3945_build_addsta_hcmd(const struct il_addsta_cmd *cmd, u8 * data) |
| 2239 |
{ |
| 2240 |
struct il3945_addsta_cmd *addsta = (struct il3945_addsta_cmd *)data; |
| 2241 |
addsta->mode = cmd->mode; |
| 2242 |
memcpy(&addsta->sta, &cmd->sta, sizeof(struct sta_id_modify)); |
| 2243 |
memcpy(&addsta->key, &cmd->key, sizeof(struct il4965_keyinfo)); |
| 2244 |
addsta->station_flags = cmd->station_flags; |
| 2245 |
addsta->station_flags_msk = cmd->station_flags_msk; |
| 2246 |
addsta->tid_disable_tx = cpu_to_le16(0); |
| 2247 |
addsta->rate_n_flags = cmd->rate_n_flags; |
| 2248 |
addsta->add_immediate_ba_tid = cmd->add_immediate_ba_tid; |
| 2249 |
addsta->remove_immediate_ba_tid = cmd->remove_immediate_ba_tid; |
| 2250 |
addsta->add_immediate_ba_ssn = cmd->add_immediate_ba_ssn; |
| 2251 |
|
| 2252 |
return (u16) sizeof(struct il3945_addsta_cmd); |
| 2253 |
} |
| 2254 |
|
| 2255 |
static int |
| 2256 |
il3945_add_bssid_station(struct il_priv *il, const u8 * addr, u8 * sta_id_r) |
| 2257 |
{ |
| 2258 |
int ret; |
| 2259 |
u8 sta_id; |
| 2260 |
unsigned long flags; |
| 2261 |
|
| 2262 |
if (sta_id_r) |
| 2263 |
*sta_id_r = IL_INVALID_STATION; |
| 2264 |
|
| 2265 |
ret = il_add_station_common(il, addr, 0, NULL, &sta_id); |
| 2266 |
if (ret) { |
| 2267 |
IL_ERR("Unable to add station %pM\n", addr); |
| 2268 |
return ret; |
| 2269 |
} |
| 2270 |
|
| 2271 |
if (sta_id_r) |
| 2272 |
*sta_id_r = sta_id; |
| 2273 |
|
| 2274 |
spin_lock_irqsave(&il->sta_lock, flags); |
| 2275 |
il->stations[sta_id].used |= IL_STA_LOCAL; |
| 2276 |
spin_unlock_irqrestore(&il->sta_lock, flags); |
| 2277 |
|
| 2278 |
return 0; |
| 2279 |
} |
| 2280 |
|
| 2281 |
static int |
| 2282 |
il3945_manage_ibss_station(struct il_priv *il, struct ieee80211_vif *vif, |
| 2283 |
bool add) |
| 2284 |
{ |
| 2285 |
struct il_vif_priv *vif_priv = (void *)vif->drv_priv; |
| 2286 |
int ret; |
| 2287 |
|
| 2288 |
if (add) { |
| 2289 |
ret = |
| 2290 |
il3945_add_bssid_station(il, vif->bss_conf.bssid, |
| 2291 |
&vif_priv->ibss_bssid_sta_id); |
| 2292 |
if (ret) |
| 2293 |
return ret; |
| 2294 |
|
| 2295 |
il3945_sync_sta(il, vif_priv->ibss_bssid_sta_id, |
| 2296 |
(il->band == |
| 2297 |
NL80211_BAND_5GHZ) ? RATE_6M_PLCP : |
| 2298 |
RATE_1M_PLCP); |
| 2299 |
il3945_rate_scale_init(il->hw, vif_priv->ibss_bssid_sta_id); |
| 2300 |
|
| 2301 |
return 0; |
| 2302 |
} |
| 2303 |
|
| 2304 |
return il_remove_station(il, vif_priv->ibss_bssid_sta_id, |
| 2305 |
vif->bss_conf.bssid); |
| 2306 |
} |
| 2307 |
|
| 2308 |
/* |
| 2309 |
* il3945_init_hw_rate_table - Initialize the hardware rate fallback table |
| 2310 |
*/ |
| 2311 |
int |
| 2312 |
il3945_init_hw_rate_table(struct il_priv *il) |
| 2313 |
{ |
| 2314 |
int rc, i, idx, prev_idx; |
| 2315 |
struct il3945_rate_scaling_cmd rate_cmd = { |
| 2316 |
.reserved = {0, 0, 0}, |
| 2317 |
}; |
| 2318 |
struct il3945_rate_scaling_info *table = rate_cmd.table; |
| 2319 |
|
| 2320 |
for (i = 0; i < ARRAY_SIZE(il3945_rates); i++) { |
| 2321 |
idx = il3945_rates[i].table_rs_idx; |
| 2322 |
|
| 2323 |
table[idx].rate_n_flags = cpu_to_le16(il3945_rates[i].plcp); |
| 2324 |
table[idx].try_cnt = il->retry_rate; |
| 2325 |
prev_idx = il3945_get_prev_ieee_rate(i); |
| 2326 |
table[idx].next_rate_idx = il3945_rates[prev_idx].table_rs_idx; |
| 2327 |
} |
| 2328 |
|
| 2329 |
switch (il->band) { |
| 2330 |
case NL80211_BAND_5GHZ: |
| 2331 |
D_RATE("Select A mode rate scale\n"); |
| 2332 |
/* If one of the following CCK rates is used, |
| 2333 |
* have it fall back to the 6M OFDM rate */ |
| 2334 |
for (i = RATE_1M_IDX_TBL; i <= RATE_11M_IDX_TBL; i++) |
| 2335 |
table[i].next_rate_idx = |
| 2336 |
il3945_rates[IL_FIRST_OFDM_RATE].table_rs_idx; |
| 2337 |
|
| 2338 |
/* Don't fall back to CCK rates */ |
| 2339 |
table[RATE_12M_IDX_TBL].next_rate_idx = RATE_9M_IDX_TBL; |
| 2340 |
|
| 2341 |
/* Don't drop out of OFDM rates */ |
| 2342 |
table[RATE_6M_IDX_TBL].next_rate_idx = |
| 2343 |
il3945_rates[IL_FIRST_OFDM_RATE].table_rs_idx; |
| 2344 |
break; |
| 2345 |
|
| 2346 |
case NL80211_BAND_2GHZ: |
| 2347 |
D_RATE("Select B/G mode rate scale\n"); |
| 2348 |
/* If an OFDM rate is used, have it fall back to the |
| 2349 |
* 1M CCK rates */ |
| 2350 |
|
| 2351 |
if (!(il->_3945.sta_supp_rates & IL_OFDM_RATES_MASK) && |
| 2352 |
il_is_associated(il)) { |
| 2353 |
|
| 2354 |
idx = IL_FIRST_CCK_RATE; |
| 2355 |
for (i = RATE_6M_IDX_TBL; i <= RATE_54M_IDX_TBL; i++) |
| 2356 |
table[i].next_rate_idx = |
| 2357 |
il3945_rates[idx].table_rs_idx; |
| 2358 |
|
| 2359 |
idx = RATE_11M_IDX_TBL; |
| 2360 |
/* CCK shouldn't fall back to OFDM... */ |
| 2361 |
table[idx].next_rate_idx = RATE_5M_IDX_TBL; |
| 2362 |
} |
| 2363 |
break; |
| 2364 |
|
| 2365 |
default: |
| 2366 |
WARN_ON(1); |
| 2367 |
break; |
| 2368 |
} |
| 2369 |
|
| 2370 |
/* Update the rate scaling for control frame Tx */ |
| 2371 |
rate_cmd.table_id = 0; |
| 2372 |
rc = il_send_cmd_pdu(il, C_RATE_SCALE, sizeof(rate_cmd), &rate_cmd); |
| 2373 |
if (rc) |
| 2374 |
return rc; |
| 2375 |
|
| 2376 |
/* Update the rate scaling for data frame Tx */ |
| 2377 |
rate_cmd.table_id = 1; |
| 2378 |
return il_send_cmd_pdu(il, C_RATE_SCALE, sizeof(rate_cmd), &rate_cmd); |
| 2379 |
} |
| 2380 |
|
| 2381 |
/* Called when initializing driver */ |
| 2382 |
int |
| 2383 |
il3945_hw_set_hw_params(struct il_priv *il) |
| 2384 |
{ |
| 2385 |
memset((void *)&il->hw_params, 0, sizeof(struct il_hw_params)); |
| 2386 |
|
| 2387 |
il->_3945.shared_virt = |
| 2388 |
dma_alloc_coherent(&il->pci_dev->dev, sizeof(struct il3945_shared), |
| 2389 |
&il->_3945.shared_phys, GFP_KERNEL); |
| 2390 |
if (!il->_3945.shared_virt) |
| 2391 |
return -ENOMEM; |
| 2392 |
|
| 2393 |
il->hw_params.bcast_id = IL3945_BROADCAST_ID; |
| 2394 |
|
| 2395 |
/* Assign number of Usable TX queues */ |
| 2396 |
il->hw_params.max_txq_num = il->cfg->num_of_queues; |
| 2397 |
|
| 2398 |
il->hw_params.tfd_size = sizeof(struct il3945_tfd); |
| 2399 |
il->hw_params.rx_page_order = get_order(IL_RX_BUF_SIZE_3K); |
| 2400 |
il->hw_params.max_rxq_size = RX_QUEUE_SIZE; |
| 2401 |
il->hw_params.max_rxq_log = RX_QUEUE_SIZE_LOG; |
| 2402 |
il->hw_params.max_stations = IL3945_STATION_COUNT; |
| 2403 |
|
| 2404 |
il->sta_key_max_num = STA_KEY_MAX_NUM; |
| 2405 |
|
| 2406 |
il->hw_params.rx_wrt_ptr_reg = FH39_RSCSR_CHNL0_WPTR; |
| 2407 |
il->hw_params.max_beacon_itrvl = IL39_MAX_UCODE_BEACON_INTERVAL; |
| 2408 |
il->hw_params.beacon_time_tsf_bits = IL3945_EXT_BEACON_TIME_POS; |
| 2409 |
|
| 2410 |
return 0; |
| 2411 |
} |
| 2412 |
|
| 2413 |
unsigned int |
| 2414 |
il3945_hw_get_beacon_cmd(struct il_priv *il, struct il3945_frame *frame, |
| 2415 |
u8 rate) |
| 2416 |
{ |
| 2417 |
struct il3945_tx_beacon_cmd *tx_beacon_cmd; |
| 2418 |
unsigned int frame_size; |
| 2419 |
|
| 2420 |
tx_beacon_cmd = (struct il3945_tx_beacon_cmd *)&frame->u; |
| 2421 |
memset(tx_beacon_cmd, 0, sizeof(*tx_beacon_cmd)); |
| 2422 |
|
| 2423 |
tx_beacon_cmd->tx.sta_id = il->hw_params.bcast_id; |
| 2424 |
tx_beacon_cmd->tx.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE; |
| 2425 |
|
| 2426 |
frame_size = |
| 2427 |
il3945_fill_beacon_frame(il, tx_beacon_cmd->frame, |
| 2428 |
sizeof(frame->u) - sizeof(*tx_beacon_cmd)); |
| 2429 |
|
| 2430 |
BUG_ON(frame_size > MAX_MPDU_SIZE); |
| 2431 |
tx_beacon_cmd->tx.len = cpu_to_le16((u16) frame_size); |
| 2432 |
|
| 2433 |
tx_beacon_cmd->tx.rate = rate; |
| 2434 |
tx_beacon_cmd->tx.tx_flags = |
| 2435 |
(TX_CMD_FLG_SEQ_CTL_MSK | TX_CMD_FLG_TSF_MSK); |
| 2436 |
|
| 2437 |
/* supp_rates[0] == OFDM start at IL_FIRST_OFDM_RATE */ |
| 2438 |
tx_beacon_cmd->tx.supp_rates[0] = |
| 2439 |
(IL_OFDM_BASIC_RATES_MASK >> IL_FIRST_OFDM_RATE) & 0xFF; |
| 2440 |
|
| 2441 |
tx_beacon_cmd->tx.supp_rates[1] = (IL_CCK_BASIC_RATES_MASK & 0xF); |
| 2442 |
|
| 2443 |
return sizeof(struct il3945_tx_beacon_cmd) + frame_size; |
| 2444 |
} |
| 2445 |
|
| 2446 |
void |
| 2447 |
il3945_hw_handler_setup(struct il_priv *il) |
| 2448 |
{ |
| 2449 |
il->handlers[C_TX] = il3945_hdl_tx; |
| 2450 |
il->handlers[N_3945_RX] = il3945_hdl_rx; |
| 2451 |
} |
| 2452 |
|
| 2453 |
void |
| 2454 |
il3945_hw_setup_deferred_work(struct il_priv *il) |
| 2455 |
{ |
| 2456 |
INIT_DELAYED_WORK(&il->_3945.thermal_periodic, |
| 2457 |
il3945_bg_reg_txpower_periodic); |
| 2458 |
} |
| 2459 |
|
| 2460 |
void |
| 2461 |
il3945_hw_cancel_deferred_work(struct il_priv *il) |
| 2462 |
{ |
| 2463 |
cancel_delayed_work(&il->_3945.thermal_periodic); |
| 2464 |
} |
| 2465 |
|
| 2466 |
/* check contents of special bootstrap uCode SRAM */ |
| 2467 |
static int |
| 2468 |
il3945_verify_bsm(struct il_priv *il) |
| 2469 |
{ |
| 2470 |
__le32 *image = il->ucode_boot.v_addr; |
| 2471 |
u32 len = il->ucode_boot.len; |
| 2472 |
u32 reg; |
| 2473 |
u32 val; |
| 2474 |
|
| 2475 |
D_INFO("Begin verify bsm\n"); |
| 2476 |
|
| 2477 |
/* verify BSM SRAM contents */ |
| 2478 |
val = il_rd_prph(il, BSM_WR_DWCOUNT_REG); |
| 2479 |
for (reg = BSM_SRAM_LOWER_BOUND; reg < BSM_SRAM_LOWER_BOUND + len; |
| 2480 |
reg += sizeof(u32), image++) { |
| 2481 |
val = il_rd_prph(il, reg); |
| 2482 |
if (val != le32_to_cpu(*image)) { |
| 2483 |
IL_ERR("BSM uCode verification failed at " |
| 2484 |
"addr 0x%08X+%u (of %u), is 0x%x, s/b 0x%x\n", |
| 2485 |
BSM_SRAM_LOWER_BOUND, reg - BSM_SRAM_LOWER_BOUND, |
| 2486 |
len, val, le32_to_cpu(*image)); |
| 2487 |
return -EIO; |
| 2488 |
} |
| 2489 |
} |
| 2490 |
|
| 2491 |
D_INFO("BSM bootstrap uCode image OK\n"); |
| 2492 |
|
| 2493 |
return 0; |
| 2494 |
} |
| 2495 |
|
| 2496 |
/****************************************************************************** |
| 2497 |
* |
| 2498 |
* EEPROM related functions |
| 2499 |
* |
| 2500 |
******************************************************************************/ |
| 2501 |
|
| 2502 |
/* |
| 2503 |
* Clear the OWNER_MSK, to establish driver (instead of uCode running on |
| 2504 |
* embedded controller) as EEPROM reader; each read is a series of pulses |
| 2505 |
* to/from the EEPROM chip, not a single event, so even reads could conflict |
| 2506 |
* if they weren't arbitrated by some ownership mechanism. Here, the driver |
| 2507 |
* simply claims ownership, which should be safe when this function is called |
| 2508 |
* (i.e. before loading uCode!). |
| 2509 |
*/ |
| 2510 |
static int |
| 2511 |
il3945_eeprom_acquire_semaphore(struct il_priv *il) |
| 2512 |
{ |
| 2513 |
_il_clear_bit(il, CSR_EEPROM_GP, CSR_EEPROM_GP_IF_OWNER_MSK); |
| 2514 |
return 0; |
| 2515 |
} |
| 2516 |
|
| 2517 |
static void |
| 2518 |
il3945_eeprom_release_semaphore(struct il_priv *il) |
| 2519 |
{ |
| 2520 |
return; |
| 2521 |
} |
| 2522 |
|
| 2523 |
/* |
| 2524 |
* il3945_load_bsm - Load bootstrap instructions |
| 2525 |
* |
| 2526 |
* BSM operation: |
| 2527 |
* |
| 2528 |
* The Bootstrap State Machine (BSM) stores a short bootstrap uCode program |
| 2529 |
* in special SRAM that does not power down during RFKILL. When powering back |
| 2530 |
* up after power-saving sleeps (or during initial uCode load), the BSM loads |
| 2531 |
* the bootstrap program into the on-board processor, and starts it. |
| 2532 |
* |
| 2533 |
* The bootstrap program loads (via DMA) instructions and data for a new |
| 2534 |
* program from host DRAM locations indicated by the host driver in the |
| 2535 |
* BSM_DRAM_* registers. Once the new program is loaded, it starts |
| 2536 |
* automatically. |
| 2537 |
* |
| 2538 |
* When initializing the NIC, the host driver points the BSM to the |
| 2539 |
* "initialize" uCode image. This uCode sets up some internal data, then |
| 2540 |
* notifies host via "initialize alive" that it is complete. |
| 2541 |
* |
| 2542 |
* The host then replaces the BSM_DRAM_* pointer values to point to the |
| 2543 |
* normal runtime uCode instructions and a backup uCode data cache buffer |
| 2544 |
* (filled initially with starting data values for the on-board processor), |
| 2545 |
* then triggers the "initialize" uCode to load and launch the runtime uCode, |
| 2546 |
* which begins normal operation. |
| 2547 |
* |
| 2548 |
* When doing a power-save shutdown, runtime uCode saves data SRAM into |
| 2549 |
* the backup data cache in DRAM before SRAM is powered down. |
| 2550 |
* |
| 2551 |
* When powering back up, the BSM loads the bootstrap program. This reloads |
| 2552 |
* the runtime uCode instructions and the backup data cache into SRAM, |
| 2553 |
* and re-launches the runtime uCode from where it left off. |
| 2554 |
*/ |
| 2555 |
static int |
| 2556 |
il3945_load_bsm(struct il_priv *il) |
| 2557 |
{ |
| 2558 |
__le32 *image = il->ucode_boot.v_addr; |
| 2559 |
u32 len = il->ucode_boot.len; |
| 2560 |
dma_addr_t pinst; |
| 2561 |
dma_addr_t pdata; |
| 2562 |
u32 inst_len; |
| 2563 |
u32 data_len; |
| 2564 |
int rc; |
| 2565 |
int i; |
| 2566 |
u32 done; |
| 2567 |
u32 reg_offset; |
| 2568 |
|
| 2569 |
D_INFO("Begin load bsm\n"); |
| 2570 |
|
| 2571 |
/* make sure bootstrap program is no larger than BSM's SRAM size */ |
| 2572 |
if (len > IL39_MAX_BSM_SIZE) |
| 2573 |
return -EINVAL; |
| 2574 |
|
| 2575 |
/* Tell bootstrap uCode where to find the "Initialize" uCode |
| 2576 |
* in host DRAM ... host DRAM physical address bits 31:0 for 3945. |
| 2577 |
* NOTE: il3945_initialize_alive_start() will replace these values, |
| 2578 |
* after the "initialize" uCode has run, to point to |
| 2579 |
* runtime/protocol instructions and backup data cache. */ |
| 2580 |
pinst = il->ucode_init.p_addr; |
| 2581 |
pdata = il->ucode_init_data.p_addr; |
| 2582 |
inst_len = il->ucode_init.len; |
| 2583 |
data_len = il->ucode_init_data.len; |
| 2584 |
|
| 2585 |
il_wr_prph(il, BSM_DRAM_INST_PTR_REG, pinst); |
| 2586 |
il_wr_prph(il, BSM_DRAM_DATA_PTR_REG, pdata); |
| 2587 |
il_wr_prph(il, BSM_DRAM_INST_BYTECOUNT_REG, inst_len); |
| 2588 |
il_wr_prph(il, BSM_DRAM_DATA_BYTECOUNT_REG, data_len); |
| 2589 |
|
| 2590 |
/* Fill BSM memory with bootstrap instructions */ |
| 2591 |
for (reg_offset = BSM_SRAM_LOWER_BOUND; |
| 2592 |
reg_offset < BSM_SRAM_LOWER_BOUND + len; |
| 2593 |
reg_offset += sizeof(u32), image++) |
| 2594 |
_il_wr_prph(il, reg_offset, le32_to_cpu(*image)); |
| 2595 |
|
| 2596 |
rc = il3945_verify_bsm(il); |
| 2597 |
if (rc) |
| 2598 |
return rc; |
| 2599 |
|
| 2600 |
/* Tell BSM to copy from BSM SRAM into instruction SRAM, when asked */ |
| 2601 |
il_wr_prph(il, BSM_WR_MEM_SRC_REG, 0x0); |
| 2602 |
il_wr_prph(il, BSM_WR_MEM_DST_REG, IL39_RTC_INST_LOWER_BOUND); |
| 2603 |
il_wr_prph(il, BSM_WR_DWCOUNT_REG, len / sizeof(u32)); |
| 2604 |
|
| 2605 |
/* Load bootstrap code into instruction SRAM now, |
| 2606 |
* to prepare to load "initialize" uCode */ |
| 2607 |
il_wr_prph(il, BSM_WR_CTRL_REG, BSM_WR_CTRL_REG_BIT_START); |
| 2608 |
|
| 2609 |
/* Wait for load of bootstrap uCode to finish */ |
| 2610 |
for (i = 0; i < 100; i++) { |
| 2611 |
done = il_rd_prph(il, BSM_WR_CTRL_REG); |
| 2612 |
if (!(done & BSM_WR_CTRL_REG_BIT_START)) |
| 2613 |
break; |
| 2614 |
udelay(10); |
| 2615 |
} |
| 2616 |
if (i < 100) |
| 2617 |
D_INFO("BSM write complete, poll %d iterations\n", i); |
| 2618 |
else { |
| 2619 |
IL_ERR("BSM write did not complete!\n"); |
| 2620 |
return -EIO; |
| 2621 |
} |
| 2622 |
|
| 2623 |
/* Enable future boot loads whenever power management unit triggers it |
| 2624 |
* (e.g. when powering back up after power-save shutdown) */ |
| 2625 |
il_wr_prph(il, BSM_WR_CTRL_REG, BSM_WR_CTRL_REG_BIT_START_EN); |
| 2626 |
|
| 2627 |
return 0; |
| 2628 |
} |
| 2629 |
|
| 2630 |
const struct il_ops il3945_ops = { |
| 2631 |
.txq_attach_buf_to_tfd = il3945_hw_txq_attach_buf_to_tfd, |
| 2632 |
.txq_free_tfd = il3945_hw_txq_free_tfd, |
| 2633 |
.txq_init = il3945_hw_tx_queue_init, |
| 2634 |
.load_ucode = il3945_load_bsm, |
| 2635 |
.dump_nic_error_log = il3945_dump_nic_error_log, |
| 2636 |
.apm_init = il3945_apm_init, |
| 2637 |
.send_tx_power = il3945_send_tx_power, |
| 2638 |
.is_valid_rtc_data_addr = il3945_hw_valid_rtc_data_addr, |
| 2639 |
.eeprom_acquire_semaphore = il3945_eeprom_acquire_semaphore, |
| 2640 |
.eeprom_release_semaphore = il3945_eeprom_release_semaphore, |
| 2641 |
|
| 2642 |
.rxon_assoc = il3945_send_rxon_assoc, |
| 2643 |
.commit_rxon = il3945_commit_rxon, |
| 2644 |
|
| 2645 |
.get_hcmd_size = il3945_get_hcmd_size, |
| 2646 |
.build_addsta_hcmd = il3945_build_addsta_hcmd, |
| 2647 |
.request_scan = il3945_request_scan, |
| 2648 |
.post_scan = il3945_post_scan, |
| 2649 |
|
| 2650 |
.post_associate = il3945_post_associate, |
| 2651 |
.config_ap = il3945_config_ap, |
| 2652 |
.manage_ibss_station = il3945_manage_ibss_station, |
| 2653 |
|
| 2654 |
.send_led_cmd = il3945_send_led_cmd, |
| 2655 |
}; |
| 2656 |
|
| 2657 |
static const struct il_cfg il3945_bg_cfg = { |
| 2658 |
.name = "3945BG", |
| 2659 |
.fw_name_pre = IL3945_FW_PRE, |
| 2660 |
.ucode_api_max = IL3945_UCODE_API_MAX, |
| 2661 |
.ucode_api_min = IL3945_UCODE_API_MIN, |
| 2662 |
.sku = IL_SKU_G, |
| 2663 |
.eeprom_ver = EEPROM_3945_EEPROM_VERSION, |
| 2664 |
.mod_params = &il3945_mod_params, |
| 2665 |
.led_mode = IL_LED_BLINK, |
| 2666 |
|
| 2667 |
.eeprom_size = IL3945_EEPROM_IMG_SIZE, |
| 2668 |
.num_of_queues = IL39_NUM_QUEUES, |
| 2669 |
.pll_cfg_val = CSR39_ANA_PLL_CFG_VAL, |
| 2670 |
.set_l0s = false, |
| 2671 |
.use_bsm = true, |
| 2672 |
.led_compensation = 64, |
| 2673 |
.wd_timeout = IL_DEF_WD_TIMEOUT, |
| 2674 |
|
| 2675 |
.regulatory_bands = { |
| 2676 |
EEPROM_REGULATORY_BAND_1_CHANNELS, |
| 2677 |
EEPROM_REGULATORY_BAND_2_CHANNELS, |
| 2678 |
EEPROM_REGULATORY_BAND_3_CHANNELS, |
| 2679 |
EEPROM_REGULATORY_BAND_4_CHANNELS, |
| 2680 |
EEPROM_REGULATORY_BAND_5_CHANNELS, |
| 2681 |
EEPROM_REGULATORY_BAND_NO_HT40, |
| 2682 |
EEPROM_REGULATORY_BAND_NO_HT40, |
| 2683 |
}, |
| 2684 |
}; |
| 2685 |
|
| 2686 |
static const struct il_cfg il3945_abg_cfg = { |
| 2687 |
.name = "3945ABG", |
| 2688 |
.fw_name_pre = IL3945_FW_PRE, |
| 2689 |
.ucode_api_max = IL3945_UCODE_API_MAX, |
| 2690 |
.ucode_api_min = IL3945_UCODE_API_MIN, |
| 2691 |
.sku = IL_SKU_A | IL_SKU_G, |
| 2692 |
.eeprom_ver = EEPROM_3945_EEPROM_VERSION, |
| 2693 |
.mod_params = &il3945_mod_params, |
| 2694 |
.led_mode = IL_LED_BLINK, |
| 2695 |
|
| 2696 |
.eeprom_size = IL3945_EEPROM_IMG_SIZE, |
| 2697 |
.num_of_queues = IL39_NUM_QUEUES, |
| 2698 |
.pll_cfg_val = CSR39_ANA_PLL_CFG_VAL, |
| 2699 |
.set_l0s = false, |
| 2700 |
.use_bsm = true, |
| 2701 |
.led_compensation = 64, |
| 2702 |
.wd_timeout = IL_DEF_WD_TIMEOUT, |
| 2703 |
|
| 2704 |
.regulatory_bands = { |
| 2705 |
EEPROM_REGULATORY_BAND_1_CHANNELS, |
| 2706 |
EEPROM_REGULATORY_BAND_2_CHANNELS, |
| 2707 |
EEPROM_REGULATORY_BAND_3_CHANNELS, |
| 2708 |
EEPROM_REGULATORY_BAND_4_CHANNELS, |
| 2709 |
EEPROM_REGULATORY_BAND_5_CHANNELS, |
| 2710 |
EEPROM_REGULATORY_BAND_NO_HT40, |
| 2711 |
EEPROM_REGULATORY_BAND_NO_HT40, |
| 2712 |
}, |
| 2713 |
}; |
| 2714 |
|
| 2715 |
const struct pci_device_id il3945_hw_card_ids[] = { |
| 2716 |
{IL_PCI_DEVICE(0x4222, 0x1005, il3945_bg_cfg)}, |
| 2717 |
{IL_PCI_DEVICE(0x4222, 0x1034, il3945_bg_cfg)}, |
| 2718 |
{IL_PCI_DEVICE(0x4222, 0x1044, il3945_bg_cfg)}, |
| 2719 |
{IL_PCI_DEVICE(0x4227, 0x1014, il3945_bg_cfg)}, |
| 2720 |
{IL_PCI_DEVICE(0x4222, PCI_ANY_ID, il3945_abg_cfg)}, |
| 2721 |
{IL_PCI_DEVICE(0x4227, PCI_ANY_ID, il3945_abg_cfg)}, |
| 2722 |
{0} |
| 2723 |
}; |
| 2724 |
|
| 2725 |
MODULE_DEVICE_TABLE(pci, il3945_hw_card_ids); |