| 1 |
/* SPDX-License-Identifier: GPL-2.0 */ |
| 2 |
#ifndef __CVMX_CONFIG_H__ |
| 3 |
#define __CVMX_CONFIG_H__ |
| 4 |
|
| 5 |
/************************* Config Specific Defines ************************/ |
| 6 |
#define CVMX_LLM_NUM_PORTS 1 |
| 7 |
#define CVMX_NULL_POINTER_PROTECT 1 |
| 8 |
#define CVMX_ENABLE_DEBUG_PRINTS 1 |
| 9 |
/* PKO queues per port for interface 0 (ports 0-15) */ |
| 10 |
#define CVMX_PKO_QUEUES_PER_PORT_INTERFACE0 1 |
| 11 |
/* PKO queues per port for interface 1 (ports 16-31) */ |
| 12 |
#define CVMX_PKO_QUEUES_PER_PORT_INTERFACE1 1 |
| 13 |
/* Limit on the number of PKO ports enabled for interface 0 */ |
| 14 |
#define CVMX_PKO_MAX_PORTS_INTERFACE0 CVMX_HELPER_PKO_MAX_PORTS_INTERFACE0 |
| 15 |
/* Limit on the number of PKO ports enabled for interface 1 */ |
| 16 |
#define CVMX_PKO_MAX_PORTS_INTERFACE1 CVMX_HELPER_PKO_MAX_PORTS_INTERFACE1 |
| 17 |
/* PKO queues per port for PCI (ports 32-35) */ |
| 18 |
#define CVMX_PKO_QUEUES_PER_PORT_PCI 1 |
| 19 |
/* PKO queues per port for Loop devices (ports 36-39) */ |
| 20 |
#define CVMX_PKO_QUEUES_PER_PORT_LOOP 1 |
| 21 |
|
| 22 |
/************************* FPA allocation *********************************/ |
| 23 |
/* Pool sizes in bytes, must be multiple of a cache line */ |
| 24 |
#define CVMX_FPA_POOL_0_SIZE (16 * CVMX_CACHE_LINE_SIZE) |
| 25 |
#define CVMX_FPA_POOL_1_SIZE (1 * CVMX_CACHE_LINE_SIZE) |
| 26 |
#define CVMX_FPA_POOL_2_SIZE (8 * CVMX_CACHE_LINE_SIZE) |
| 27 |
#define CVMX_FPA_POOL_3_SIZE (0 * CVMX_CACHE_LINE_SIZE) |
| 28 |
#define CVMX_FPA_POOL_4_SIZE (0 * CVMX_CACHE_LINE_SIZE) |
| 29 |
#define CVMX_FPA_POOL_5_SIZE (0 * CVMX_CACHE_LINE_SIZE) |
| 30 |
#define CVMX_FPA_POOL_6_SIZE (0 * CVMX_CACHE_LINE_SIZE) |
| 31 |
#define CVMX_FPA_POOL_7_SIZE (0 * CVMX_CACHE_LINE_SIZE) |
| 32 |
|
| 33 |
/* Pools in use */ |
| 34 |
/* Packet buffers */ |
| 35 |
#define CVMX_FPA_PACKET_POOL (0) |
| 36 |
#define CVMX_FPA_PACKET_POOL_SIZE CVMX_FPA_POOL_0_SIZE |
| 37 |
/* Work queue entries */ |
| 38 |
#define CVMX_FPA_WQE_POOL (1) |
| 39 |
#define CVMX_FPA_WQE_POOL_SIZE CVMX_FPA_POOL_1_SIZE |
| 40 |
/* PKO queue command buffers */ |
| 41 |
#define CVMX_FPA_OUTPUT_BUFFER_POOL (2) |
| 42 |
#define CVMX_FPA_OUTPUT_BUFFER_POOL_SIZE CVMX_FPA_POOL_2_SIZE |
| 43 |
|
| 44 |
/************************* FAU allocation ********************************/ |
| 45 |
/* The fetch and add registers are allocated here. They are arranged |
| 46 |
* in order of descending size so that all alignment constraints are |
| 47 |
* automatically met. The enums are linked so that the following enum |
| 48 |
* continues allocating where the previous one left off, so the |
| 49 |
* numbering within each enum always starts with zero. The macros |
| 50 |
* take care of the address increment size, so the values entered |
| 51 |
* always increase by 1. FAU registers are accessed with byte |
| 52 |
* addresses. |
| 53 |
*/ |
| 54 |
|
| 55 |
#define CVMX_FAU_REG_64_ADDR(x) ((x << 3) + CVMX_FAU_REG_64_START) |
| 56 |
typedef enum { |
| 57 |
CVMX_FAU_REG_64_START = 0, |
| 58 |
CVMX_FAU_REG_64_END = CVMX_FAU_REG_64_ADDR(0), |
| 59 |
} cvmx_fau_reg_64_t; |
| 60 |
|
| 61 |
#define CVMX_FAU_REG_32_ADDR(x) ((x << 2) + CVMX_FAU_REG_32_START) |
| 62 |
typedef enum { |
| 63 |
CVMX_FAU_REG_32_START = CVMX_FAU_REG_64_END, |
| 64 |
CVMX_FAU_REG_32_END = CVMX_FAU_REG_32_ADDR(0), |
| 65 |
} cvmx_fau_reg_32_t; |
| 66 |
|
| 67 |
#define CVMX_FAU_REG_16_ADDR(x) ((x << 1) + CVMX_FAU_REG_16_START) |
| 68 |
typedef enum { |
| 69 |
CVMX_FAU_REG_16_START = CVMX_FAU_REG_32_END, |
| 70 |
CVMX_FAU_REG_16_END = CVMX_FAU_REG_16_ADDR(0), |
| 71 |
} cvmx_fau_reg_16_t; |
| 72 |
|
| 73 |
#define CVMX_FAU_REG_8_ADDR(x) ((x) + CVMX_FAU_REG_8_START) |
| 74 |
typedef enum { |
| 75 |
CVMX_FAU_REG_8_START = CVMX_FAU_REG_16_END, |
| 76 |
CVMX_FAU_REG_8_END = CVMX_FAU_REG_8_ADDR(0), |
| 77 |
} cvmx_fau_reg_8_t; |
| 78 |
|
| 79 |
/* |
| 80 |
* The name CVMX_FAU_REG_AVAIL_BASE is provided to indicate the first |
| 81 |
* available FAU address that is not allocated in cvmx-config.h. This |
| 82 |
* is 64 bit aligned. |
| 83 |
*/ |
| 84 |
#define CVMX_FAU_REG_AVAIL_BASE ((CVMX_FAU_REG_8_END + 0x7) & (~0x7ULL)) |
| 85 |
#define CVMX_FAU_REG_END (2048) |
| 86 |
|
| 87 |
/********************** scratch memory allocation *************************/ |
| 88 |
/* Scratchpad memory allocation. Note that these are byte memory |
| 89 |
* addresses. Some uses of scratchpad (IOBDMA for example) require |
| 90 |
* the use of 8-byte aligned addresses, so proper alignment needs to |
| 91 |
* be taken into account. |
| 92 |
*/ |
| 93 |
/* Generic scratch iobdma area */ |
| 94 |
#define CVMX_SCR_SCRATCH (0) |
| 95 |
/* First location available after cvmx-config.h allocated region. */ |
| 96 |
#define CVMX_SCR_REG_AVAIL_BASE (8) |
| 97 |
|
| 98 |
/* |
| 99 |
* CVMX_HELPER_FIRST_MBUFF_SKIP is the number of bytes to reserve |
| 100 |
* before the beginning of the packet. If necessary, override the |
| 101 |
* default here. See the IPD section of the hardware manual for MBUFF |
| 102 |
* SKIP details. |
| 103 |
*/ |
| 104 |
#define CVMX_HELPER_FIRST_MBUFF_SKIP 184 |
| 105 |
|
| 106 |
/* |
| 107 |
* CVMX_HELPER_NOT_FIRST_MBUFF_SKIP is the number of bytes to reserve |
| 108 |
* in each chained packet element. If necessary, override the default |
| 109 |
* here. |
| 110 |
*/ |
| 111 |
#define CVMX_HELPER_NOT_FIRST_MBUFF_SKIP 0 |
| 112 |
|
| 113 |
/* |
| 114 |
* CVMX_HELPER_ENABLE_BACK_PRESSURE controls whether back pressure is |
| 115 |
* enabled for all input ports. This controls if IPD sends |
| 116 |
* backpressure to all ports if Octeon's FPA pools don't have enough |
| 117 |
* packet or work queue entries. Even when this is off, it is still |
| 118 |
* possible to get backpressure from individual hardware ports. When |
| 119 |
* configuring backpressure, also check |
| 120 |
* CVMX_HELPER_DISABLE_*_BACKPRESSURE below. If necessary, override |
| 121 |
* the default here. |
| 122 |
*/ |
| 123 |
#define CVMX_HELPER_ENABLE_BACK_PRESSURE 1 |
| 124 |
|
| 125 |
/* |
| 126 |
* CVMX_HELPER_ENABLE_IPD controls if the IPD is enabled in the helper |
| 127 |
* function. Once it is enabled the hardware starts accepting |
| 128 |
* packets. You might want to skip the IPD enable if configuration |
| 129 |
* changes are need from the default helper setup. If necessary, |
| 130 |
* override the default here. |
| 131 |
*/ |
| 132 |
#define CVMX_HELPER_ENABLE_IPD 0 |
| 133 |
|
| 134 |
/* |
| 135 |
* CVMX_HELPER_INPUT_TAG_TYPE selects the type of tag that the IPD assigns |
| 136 |
* to incoming packets. |
| 137 |
*/ |
| 138 |
#define CVMX_HELPER_INPUT_TAG_TYPE CVMX_POW_TAG_TYPE_ORDERED |
| 139 |
|
| 140 |
#define CVMX_ENABLE_PARAMETER_CHECKING 0 |
| 141 |
|
| 142 |
/* |
| 143 |
* The following select which fields are used by the PIP to generate |
| 144 |
* the tag on INPUT |
| 145 |
* 0: don't include |
| 146 |
* 1: include |
| 147 |
*/ |
| 148 |
#define CVMX_HELPER_INPUT_TAG_IPV6_SRC_IP 0 |
| 149 |
#define CVMX_HELPER_INPUT_TAG_IPV6_DST_IP 0 |
| 150 |
#define CVMX_HELPER_INPUT_TAG_IPV6_SRC_PORT 0 |
| 151 |
#define CVMX_HELPER_INPUT_TAG_IPV6_DST_PORT 0 |
| 152 |
#define CVMX_HELPER_INPUT_TAG_IPV6_NEXT_HEADER 0 |
| 153 |
#define CVMX_HELPER_INPUT_TAG_IPV4_SRC_IP 0 |
| 154 |
#define CVMX_HELPER_INPUT_TAG_IPV4_DST_IP 0 |
| 155 |
#define CVMX_HELPER_INPUT_TAG_IPV4_SRC_PORT 0 |
| 156 |
#define CVMX_HELPER_INPUT_TAG_IPV4_DST_PORT 0 |
| 157 |
#define CVMX_HELPER_INPUT_TAG_IPV4_PROTOCOL 0 |
| 158 |
#define CVMX_HELPER_INPUT_TAG_INPUT_PORT 1 |
| 159 |
|
| 160 |
/* Select skip mode for input ports */ |
| 161 |
#define CVMX_HELPER_INPUT_PORT_SKIP_MODE CVMX_PIP_PORT_CFG_MODE_SKIPL2 |
| 162 |
|
| 163 |
/* |
| 164 |
* Force backpressure to be disabled. This overrides all other |
| 165 |
* backpressure configuration. |
| 166 |
*/ |
| 167 |
#define CVMX_HELPER_DISABLE_RGMII_BACKPRESSURE 0 |
| 168 |
|
| 169 |
#endif /* __CVMX_CONFIG_H__ */ |