| 1 |
/* SPDX-License-Identifier: GPL-2.0 */ |
| 2 |
#ifndef __ASM_MACH_LOONGSON64_BOOT_PARAM_H_ |
| 3 |
#define __ASM_MACH_LOONGSON64_BOOT_PARAM_H_ |
| 4 |
|
| 5 |
#include <linux/types.h> |
| 6 |
|
| 7 |
#define SYSTEM_RAM_LOW 1 |
| 8 |
#define SYSTEM_RAM_HIGH 2 |
| 9 |
#define SYSTEM_RAM_RESERVED 3 |
| 10 |
#define PCI_IO 4 |
| 11 |
#define PCI_MEM 5 |
| 12 |
#define LOONGSON_CFG_REG 6 |
| 13 |
#define VIDEO_ROM 7 |
| 14 |
#define ADAPTER_ROM 8 |
| 15 |
#define ACPI_TABLE 9 |
| 16 |
#define SMBIOS_TABLE 10 |
| 17 |
#define UMA_VIDEO_RAM 11 |
| 18 |
#define VUMA_VIDEO_RAM 12 |
| 19 |
#define MAX_MEMORY_TYPE 13 |
| 20 |
|
| 21 |
#define MEM_SIZE_IS_IN_BYTES (1 << 31) |
| 22 |
|
| 23 |
#define LOONGSON3_BOOT_MEM_MAP_MAX 128 |
| 24 |
struct efi_memory_map_loongson { |
| 25 |
u16 vers; /* version of efi_memory_map */ |
| 26 |
u32 nr_map; /* number of memory_maps */ |
| 27 |
u32 mem_freq; /* memory frequence */ |
| 28 |
struct mem_map { |
| 29 |
u32 node_id; /* node_id which memory attached to */ |
| 30 |
u32 mem_type; /* system memory, pci memory, pci io, etc. */ |
| 31 |
u64 mem_start; /* memory map start address */ |
| 32 |
u32 mem_size; /* each memory_map size, not the total size */ |
| 33 |
} map[LOONGSON3_BOOT_MEM_MAP_MAX]; |
| 34 |
} __packed; |
| 35 |
|
| 36 |
enum loongson_cpu_type { |
| 37 |
Legacy_2E = 0x0, |
| 38 |
Legacy_2F = 0x1, |
| 39 |
Legacy_3A = 0x2, |
| 40 |
Legacy_3B = 0x3, |
| 41 |
Legacy_1A = 0x4, |
| 42 |
Legacy_1B = 0x5, |
| 43 |
Legacy_2G = 0x6, |
| 44 |
Legacy_2H = 0x7, |
| 45 |
Legacy_2K = 0x8, |
| 46 |
Loongson_1A = 0x100, |
| 47 |
Loongson_1B = 0x101, |
| 48 |
Loongson_2E = 0x200, |
| 49 |
Loongson_2F = 0x201, |
| 50 |
Loongson_2G = 0x202, |
| 51 |
Loongson_2H = 0x203, |
| 52 |
Loongson_2K = 0x204, |
| 53 |
Loongson_3A = 0x300, |
| 54 |
Loongson_3B = 0x301 |
| 55 |
}; |
| 56 |
|
| 57 |
/* |
| 58 |
* Capability and feature descriptor structure for MIPS CPU |
| 59 |
*/ |
| 60 |
struct efi_cpuinfo_loongson { |
| 61 |
u16 vers; /* version of efi_cpuinfo_loongson */ |
| 62 |
u32 processor_id; /* PRID, e.g. 6305, 6306 */ |
| 63 |
u32 cputype; /* Loongson_3A/3B, etc. */ |
| 64 |
u32 total_node; /* num of total numa nodes */ |
| 65 |
u16 cpu_startup_core_id; /* Boot core id */ |
| 66 |
u16 reserved_cores_mask; |
| 67 |
u32 cpu_clock_freq; /* cpu_clock */ |
| 68 |
u32 nr_cpus; |
| 69 |
} __packed; |
| 70 |
|
| 71 |
#define MAX_UARTS 64 |
| 72 |
struct uart_device { |
| 73 |
u32 iotype; /* see include/linux/serial_core.h */ |
| 74 |
u32 uartclk; |
| 75 |
u32 int_offset; |
| 76 |
u64 uart_base; |
| 77 |
} __packed; |
| 78 |
|
| 79 |
#define MAX_SENSORS 64 |
| 80 |
#define SENSOR_TEMPER 0x00000001 |
| 81 |
#define SENSOR_VOLTAGE 0x00000002 |
| 82 |
#define SENSOR_FAN 0x00000004 |
| 83 |
struct sensor_device { |
| 84 |
char name[32]; /* a formal name */ |
| 85 |
char label[64]; /* a flexible description */ |
| 86 |
u32 type; /* SENSOR_* */ |
| 87 |
u32 id; /* instance id of a sensor-class */ |
| 88 |
u32 fan_policy; /* see loongson_hwmon.h */ |
| 89 |
u32 fan_percent;/* only for constant speed policy */ |
| 90 |
u64 base_addr; /* base address of device registers */ |
| 91 |
} __packed; |
| 92 |
|
| 93 |
struct system_loongson { |
| 94 |
u16 vers; /* version of system_loongson */ |
| 95 |
u32 ccnuma_smp; /* 0: no numa; 1: has numa */ |
| 96 |
u32 sing_double_channel; /* 1:single; 2:double */ |
| 97 |
u32 nr_uarts; |
| 98 |
struct uart_device uarts[MAX_UARTS]; |
| 99 |
u32 nr_sensors; |
| 100 |
struct sensor_device sensors[MAX_SENSORS]; |
| 101 |
char has_ec; |
| 102 |
char ec_name[32]; |
| 103 |
u64 ec_base_addr; |
| 104 |
char has_tcm; |
| 105 |
char tcm_name[32]; |
| 106 |
u64 tcm_base_addr; |
| 107 |
u64 workarounds; /* see workarounds.h */ |
| 108 |
} __packed; |
| 109 |
|
| 110 |
struct irq_source_routing_table { |
| 111 |
u16 vers; |
| 112 |
u16 size; |
| 113 |
u16 rtr_bus; |
| 114 |
u16 rtr_devfn; |
| 115 |
u32 vendor; |
| 116 |
u32 device; |
| 117 |
u32 PIC_type; /* conform use HT or PCI to route to CPU-PIC */ |
| 118 |
u64 ht_int_bit; /* 3A: 1<<24; 3B: 1<<16 */ |
| 119 |
u64 ht_enable; /* irqs used in this PIC */ |
| 120 |
u32 node_id; /* node id: 0x0-0; 0x1-1; 0x10-2; 0x11-3 */ |
| 121 |
u64 pci_mem_start_addr; |
| 122 |
u64 pci_mem_end_addr; |
| 123 |
u64 pci_io_start_addr; |
| 124 |
u64 pci_io_end_addr; |
| 125 |
u64 pci_config_addr; |
| 126 |
u16 dma_mask_bits; |
| 127 |
u16 dma_noncoherent; |
| 128 |
} __packed; |
| 129 |
|
| 130 |
struct interface_info { |
| 131 |
u16 vers; /* version of the specification */ |
| 132 |
u16 size; /* size of this interface */ |
| 133 |
u8 flag; /* used or unused */ |
| 134 |
char description[64]; /* description for each change */ |
| 135 |
} __packed; |
| 136 |
|
| 137 |
#define MAX_RESOURCE_NUMBER 128 |
| 138 |
struct resource_loongson { |
| 139 |
u64 start; /* resource start address */ |
| 140 |
u64 end; /* resource end address */ |
| 141 |
char name[64]; |
| 142 |
u32 flags; |
| 143 |
}; |
| 144 |
|
| 145 |
struct archdev_data {}; /* arch specific additions */ |
| 146 |
|
| 147 |
struct board_devices { |
| 148 |
char name[64]; /* hold the device name */ |
| 149 |
u32 num_resources; /* number of device_resource */ |
| 150 |
/* for each device's resource */ |
| 151 |
struct resource_loongson resource[MAX_RESOURCE_NUMBER]; |
| 152 |
/* arch specific additions */ |
| 153 |
struct archdev_data archdata; |
| 154 |
}; |
| 155 |
|
| 156 |
struct loongson_special_attribute { |
| 157 |
u16 vers; /* version of this special */ |
| 158 |
char special_name[64]; /* special_atribute_name */ |
| 159 |
u32 loongson_special_type; /* type of special device */ |
| 160 |
/* for each device's resource */ |
| 161 |
struct resource_loongson resource[MAX_RESOURCE_NUMBER]; |
| 162 |
}; |
| 163 |
|
| 164 |
struct loongson_params { |
| 165 |
u64 memory_offset; /* efi_memory_map_loongson struct offset */ |
| 166 |
u64 cpu_offset; /* efi_cpuinfo_loongson struct offset */ |
| 167 |
u64 system_offset; /* system_loongson struct offset */ |
| 168 |
u64 irq_offset; /* irq_source_routing_table struct offset */ |
| 169 |
u64 interface_offset; /* interface_info struct offset */ |
| 170 |
u64 special_offset; /* loongson_special_attribute struct offset */ |
| 171 |
u64 boarddev_table_offset; /* board_devices offset */ |
| 172 |
}; |
| 173 |
|
| 174 |
struct smbios_tables { |
| 175 |
u16 vers; /* version of smbios */ |
| 176 |
u64 vga_bios; /* vga_bios address */ |
| 177 |
struct loongson_params lp; |
| 178 |
}; |
| 179 |
|
| 180 |
struct efi_reset_system_t { |
| 181 |
u64 ResetCold; |
| 182 |
u64 ResetWarm; |
| 183 |
u64 ResetType; |
| 184 |
u64 Shutdown; |
| 185 |
u64 DoSuspend; /* NULL if not support */ |
| 186 |
}; |
| 187 |
|
| 188 |
struct efi_loongson { |
| 189 |
u64 mps; /* MPS table */ |
| 190 |
u64 acpi; /* ACPI table (IA64 ext 0.71) */ |
| 191 |
u64 acpi20; /* ACPI table (ACPI 2.0) */ |
| 192 |
struct smbios_tables smbios; /* SM BIOS table */ |
| 193 |
u64 sal_systab; /* SAL system table */ |
| 194 |
u64 boot_info; /* boot info table */ |
| 195 |
}; |
| 196 |
|
| 197 |
struct boot_params { |
| 198 |
struct efi_loongson efi; |
| 199 |
struct efi_reset_system_t reset_system; |
| 200 |
}; |
| 201 |
|
| 202 |
enum loongson_bridge_type { |
| 203 |
LS7A = 1, |
| 204 |
RS780E = 2, |
| 205 |
VIRTUAL = 3 |
| 206 |
}; |
| 207 |
|
| 208 |
extern struct efi_memory_map_loongson *loongson_memmap; |
| 209 |
extern struct loongson_system_configuration loongson_sysconf; |
| 210 |
|
| 211 |
extern struct board_devices *eboard; |
| 212 |
extern struct interface_info *einter; |
| 213 |
extern struct loongson_special_attribute *especial; |
| 214 |
|
| 215 |
extern u32 node_id_offset; |
| 216 |
extern void ls7a_early_config(void); |
| 217 |
extern void rs780e_early_config(void); |
| 218 |
extern void virtual_early_config(void); |
| 219 |
|
| 220 |
#endif |