| 1 |
/* |
| 2 |
* This file is subject to the terms and conditions of the GNU General Public |
| 3 |
* License. See the file "COPYING" in the main directory of this archive |
| 4 |
* for more details. |
| 5 |
* |
| 6 |
* Copyright (C) 2005-2008 Cavium Networks, Inc |
| 7 |
*/ |
| 8 |
#ifndef __ASM_MACH_CAVIUM_OCTEON_KERNEL_ENTRY_H |
| 9 |
#define __ASM_MACH_CAVIUM_OCTEON_KERNEL_ENTRY_H |
| 10 |
|
| 11 |
#define CP0_CVMCTL_REG $9, 7 |
| 12 |
#define CP0_CVMMEMCTL_REG $11,7 |
| 13 |
#define CP0_PRID_REG $15, 0 |
| 14 |
#define CP0_DCACHE_ERR_REG $27, 1 |
| 15 |
#define CP0_PRID_OCTEON_PASS1 0x000d0000 |
| 16 |
#define CP0_PRID_OCTEON_CN30XX 0x000d0200 |
| 17 |
|
| 18 |
.macro kernel_entry_setup |
| 19 |
# Registers set by bootloader: |
| 20 |
# (only 32 bits set by bootloader, all addresses are physical |
| 21 |
# addresses, and need to have the appropriate memory region set |
| 22 |
# by the kernel |
| 23 |
# a0 = argc |
| 24 |
# a1 = argv (kseg0 compat addr) |
| 25 |
# a2 = 1 if init core, zero otherwise |
| 26 |
# a3 = address of boot descriptor block |
| 27 |
.set push |
| 28 |
.set arch=octeon |
| 29 |
# Read the cavium mem control register |
| 30 |
dmfc0 v0, CP0_CVMMEMCTL_REG |
| 31 |
# Clear the lower 6 bits, the CVMSEG size |
| 32 |
dins v0, $0, 0, 6 |
| 33 |
ori v0, CONFIG_CAVIUM_OCTEON_CVMSEG_SIZE |
| 34 |
dmtc0 v0, CP0_CVMMEMCTL_REG # Write the cavium mem control register |
| 35 |
dmfc0 v0, CP0_CVMCTL_REG # Read the cavium control register |
| 36 |
# Disable unaligned load/store support but leave HW fixup enabled |
| 37 |
# Needed for octeon specific memcpy |
| 38 |
or v0, v0, 0x5001 |
| 39 |
xor v0, v0, 0x1001 |
| 40 |
# First clear off CvmCtl[IPPCI] bit and move the performance |
| 41 |
# counters interrupt to IRQ 6 |
| 42 |
dli v1, ~(7 << 7) |
| 43 |
and v0, v0, v1 |
| 44 |
ori v0, v0, (6 << 7) |
| 45 |
|
| 46 |
mfc0 v1, CP0_PRID_REG |
| 47 |
and t1, v1, 0xfff8 |
| 48 |
xor t1, t1, 0x9000 # 63-P1 |
| 49 |
beqz t1, 4f |
| 50 |
and t1, v1, 0xfff8 |
| 51 |
xor t1, t1, 0x9008 # 63-P2 |
| 52 |
beqz t1, 4f |
| 53 |
and t1, v1, 0xfff8 |
| 54 |
xor t1, t1, 0x9100 # 68-P1 |
| 55 |
beqz t1, 4f |
| 56 |
and t1, v1, 0xff00 |
| 57 |
xor t1, t1, 0x9200 # 66-PX |
| 58 |
bnez t1, 5f # Skip WAR for others. |
| 59 |
and t1, v1, 0x00ff |
| 60 |
slti t1, t1, 2 # 66-P1.2 and later good. |
| 61 |
beqz t1, 5f |
| 62 |
|
| 63 |
4: # core-16057 work around |
| 64 |
or v0, v0, 0x2000 # Set IPREF bit. |
| 65 |
|
| 66 |
5: # No core-16057 work around |
| 67 |
# Write the cavium control register |
| 68 |
dmtc0 v0, CP0_CVMCTL_REG |
| 69 |
sync |
| 70 |
# Flush dcache after config change |
| 71 |
cache 9, 0($0) |
| 72 |
# Zero all of CVMSEG to make sure parity is correct |
| 73 |
dli v0, CONFIG_CAVIUM_OCTEON_CVMSEG_SIZE |
| 74 |
dsll v0, 7 |
| 75 |
beqz v0, 2f |
| 76 |
1: dsubu v0, 8 |
| 77 |
sd $0, -32768(v0) |
| 78 |
bnez v0, 1b |
| 79 |
2: |
| 80 |
mfc0 v0, CP0_PRID_REG |
| 81 |
bbit0 v0, 15, 1f |
| 82 |
# OCTEON II or better have bit 15 set. Clear the error bits. |
| 83 |
and t1, v0, 0xff00 |
| 84 |
dli v0, 0x9500 |
| 85 |
bge t1, v0, 1f # OCTEON III has no DCACHE_ERR_REG COP0 |
| 86 |
dli v0, 0x27 |
| 87 |
dmtc0 v0, CP0_DCACHE_ERR_REG |
| 88 |
1: |
| 89 |
# Get my core id |
| 90 |
rdhwr v0, $0 |
| 91 |
# Jump the master to kernel_entry |
| 92 |
bne a2, zero, octeon_main_processor |
| 93 |
nop |
| 94 |
|
| 95 |
#ifdef CONFIG_SMP |
| 96 |
|
| 97 |
# |
| 98 |
# All cores other than the master need to wait here for SMP bootstrap |
| 99 |
# to begin |
| 100 |
# |
| 101 |
|
| 102 |
octeon_spin_wait_boot: |
| 103 |
#ifdef CONFIG_RELOCATABLE |
| 104 |
PTR_LA t0, octeon_processor_relocated_kernel_entry |
| 105 |
LONG_L t0, (t0) |
| 106 |
beq zero, t0, 1f |
| 107 |
nop |
| 108 |
|
| 109 |
jr t0 |
| 110 |
nop |
| 111 |
1: |
| 112 |
#endif /* CONFIG_RELOCATABLE */ |
| 113 |
|
| 114 |
# This is the variable where the next core to boot is stored |
| 115 |
PTR_LA t0, octeon_processor_boot |
| 116 |
# Get the core id of the next to be booted |
| 117 |
LONG_L t1, (t0) |
| 118 |
# Keep looping if it isn't me |
| 119 |
bne t1, v0, octeon_spin_wait_boot |
| 120 |
nop |
| 121 |
# Get my GP from the global variable |
| 122 |
PTR_LA t0, octeon_processor_gp |
| 123 |
LONG_L gp, (t0) |
| 124 |
# Get my SP from the global variable |
| 125 |
PTR_LA t0, octeon_processor_sp |
| 126 |
LONG_L sp, (t0) |
| 127 |
# Set the SP global variable to zero so the master knows we've started |
| 128 |
LONG_S zero, (t0) |
| 129 |
#ifdef __OCTEON__ |
| 130 |
syncw |
| 131 |
syncw |
| 132 |
#else |
| 133 |
sync |
| 134 |
#endif |
| 135 |
# Jump to the normal Linux SMP entry point |
| 136 |
j smp_bootstrap |
| 137 |
nop |
| 138 |
#else /* CONFIG_SMP */ |
| 139 |
|
| 140 |
# |
| 141 |
# Someone tried to boot SMP with a non SMP kernel. All extra cores |
| 142 |
# will halt here. |
| 143 |
# |
| 144 |
octeon_wait_forever: |
| 145 |
wait |
| 146 |
b octeon_wait_forever |
| 147 |
nop |
| 148 |
|
| 149 |
#endif /* CONFIG_SMP */ |
| 150 |
octeon_main_processor: |
| 151 |
.set pop |
| 152 |
.endm |
| 153 |
|
| 154 |
/* |
| 155 |
* Do SMP slave processor setup necessary before we can safely execute C code. |
| 156 |
*/ |
| 157 |
.macro smp_slave_setup |
| 158 |
.endm |
| 159 |
|
| 160 |
#define USE_KEXEC_SMP_WAIT_FINAL |
| 161 |
.macro kexec_smp_wait_final |
| 162 |
.set push |
| 163 |
.set noreorder |
| 164 |
synci 0($0) |
| 165 |
.set pop |
| 166 |
.endm |
| 167 |
|
| 168 |
#endif /* __ASM_MACH_CAVIUM_OCTEON_KERNEL_ENTRY_H */ |