| 1 |
/* |
| 2 |
* |
| 3 |
* BRIEF MODULE DESCRIPTION |
| 4 |
* Include file for Alchemy Semiconductor's Au1550 Descriptor |
| 5 |
* Based DMA Controller. |
| 6 |
* |
| 7 |
* Copyright 2004 Embedded Edge, LLC |
| 8 |
* [email protected] |
| 9 |
* |
| 10 |
* This program is free software; you can redistribute it and/or modify it |
| 11 |
* under the terms of the GNU General Public License as published by the |
| 12 |
* Free Software Foundation; either version 2 of the License, or (at your |
| 13 |
* option) any later version. |
| 14 |
* |
| 15 |
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED |
| 16 |
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF |
| 17 |
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN |
| 18 |
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, |
| 19 |
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT |
| 20 |
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF |
| 21 |
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON |
| 22 |
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| 23 |
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF |
| 24 |
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| 25 |
* |
| 26 |
* You should have received a copy of the GNU General Public License along |
| 27 |
* with this program; if not, write to the Free Software Foundation, Inc., |
| 28 |
* 675 Mass Ave, Cambridge, MA 02139, USA. |
| 29 |
*/ |
| 30 |
|
| 31 |
/* |
| 32 |
* Specifics for the Au1xxx Descriptor-Based DMA Controller, |
| 33 |
* first seen in the AU1550 part. |
| 34 |
*/ |
| 35 |
#ifndef _AU1000_DBDMA_H_ |
| 36 |
#define _AU1000_DBDMA_H_ |
| 37 |
|
| 38 |
#ifndef _LANGUAGE_ASSEMBLY |
| 39 |
|
| 40 |
typedef volatile struct dbdma_global { |
| 41 |
u32 ddma_config; |
| 42 |
u32 ddma_intstat; |
| 43 |
u32 ddma_throttle; |
| 44 |
u32 ddma_inten; |
| 45 |
} dbdma_global_t; |
| 46 |
|
| 47 |
/* General Configuration. */ |
| 48 |
#define DDMA_CONFIG_AF (1 << 2) |
| 49 |
#define DDMA_CONFIG_AH (1 << 1) |
| 50 |
#define DDMA_CONFIG_AL (1 << 0) |
| 51 |
|
| 52 |
#define DDMA_THROTTLE_EN (1 << 31) |
| 53 |
|
| 54 |
/* The structure of a DMA Channel. */ |
| 55 |
typedef volatile struct au1xxx_dma_channel { |
| 56 |
u32 ddma_cfg; /* See below */ |
| 57 |
u32 ddma_desptr; /* 32-byte aligned pointer to descriptor */ |
| 58 |
u32 ddma_statptr; /* word aligned pointer to status word */ |
| 59 |
u32 ddma_dbell; /* A write activates channel operation */ |
| 60 |
u32 ddma_irq; /* If bit 0 set, interrupt pending */ |
| 61 |
u32 ddma_stat; /* See below */ |
| 62 |
u32 ddma_bytecnt; /* Byte count, valid only when chan idle */ |
| 63 |
/* Remainder, up to the 256 byte boundary, is reserved. */ |
| 64 |
} au1x_dma_chan_t; |
| 65 |
|
| 66 |
#define DDMA_CFG_SED (1 << 9) /* source DMA level/edge detect */ |
| 67 |
#define DDMA_CFG_SP (1 << 8) /* source DMA polarity */ |
| 68 |
#define DDMA_CFG_DED (1 << 7) /* destination DMA level/edge detect */ |
| 69 |
#define DDMA_CFG_DP (1 << 6) /* destination DMA polarity */ |
| 70 |
#define DDMA_CFG_SYNC (1 << 5) /* Sync static bus controller */ |
| 71 |
#define DDMA_CFG_PPR (1 << 4) /* PCI posted read/write control */ |
| 72 |
#define DDMA_CFG_DFN (1 << 3) /* Descriptor fetch non-coherent */ |
| 73 |
#define DDMA_CFG_SBE (1 << 2) /* Source big endian */ |
| 74 |
#define DDMA_CFG_DBE (1 << 1) /* Destination big endian */ |
| 75 |
#define DDMA_CFG_EN (1 << 0) /* Channel enable */ |
| 76 |
|
| 77 |
/* |
| 78 |
* Always set when descriptor processing done, regardless of |
| 79 |
* interrupt enable state. Reflected in global intstat, don't |
| 80 |
* clear this until global intstat is read/used. |
| 81 |
*/ |
| 82 |
#define DDMA_IRQ_IN (1 << 0) |
| 83 |
|
| 84 |
#define DDMA_STAT_DB (1 << 2) /* Doorbell pushed */ |
| 85 |
#define DDMA_STAT_V (1 << 1) /* Descriptor valid */ |
| 86 |
#define DDMA_STAT_H (1 << 0) /* Channel Halted */ |
| 87 |
|
| 88 |
/* |
| 89 |
* "Standard" DDMA Descriptor. |
| 90 |
* Must be 32-byte aligned. |
| 91 |
*/ |
| 92 |
typedef volatile struct au1xxx_ddma_desc { |
| 93 |
u32 dscr_cmd0; /* See below */ |
| 94 |
u32 dscr_cmd1; /* See below */ |
| 95 |
u32 dscr_source0; /* source phys address */ |
| 96 |
u32 dscr_source1; /* See below */ |
| 97 |
u32 dscr_dest0; /* Destination address */ |
| 98 |
u32 dscr_dest1; /* See below */ |
| 99 |
u32 dscr_stat; /* completion status */ |
| 100 |
u32 dscr_nxtptr; /* Next descriptor pointer (mostly) */ |
| 101 |
/* |
| 102 |
* First 32 bytes are HW specific!!! |
| 103 |
* Let's have some SW data following -- make sure it's 32 bytes. |
| 104 |
*/ |
| 105 |
u32 sw_status; |
| 106 |
u32 sw_context; |
| 107 |
u32 sw_reserved[6]; |
| 108 |
} au1x_ddma_desc_t; |
| 109 |
|
| 110 |
#define DSCR_CMD0_V (1 << 31) /* Descriptor valid */ |
| 111 |
#define DSCR_CMD0_MEM (1 << 30) /* mem-mem transfer */ |
| 112 |
#define DSCR_CMD0_SID_MASK (0x1f << 25) /* Source ID */ |
| 113 |
#define DSCR_CMD0_DID_MASK (0x1f << 20) /* Destination ID */ |
| 114 |
#define DSCR_CMD0_SW_MASK (0x3 << 18) /* Source Width */ |
| 115 |
#define DSCR_CMD0_DW_MASK (0x3 << 16) /* Destination Width */ |
| 116 |
#define DSCR_CMD0_ARB (0x1 << 15) /* Set for Hi Pri */ |
| 117 |
#define DSCR_CMD0_DT_MASK (0x3 << 13) /* Descriptor Type */ |
| 118 |
#define DSCR_CMD0_SN (0x1 << 12) /* Source non-coherent */ |
| 119 |
#define DSCR_CMD0_DN (0x1 << 11) /* Destination non-coherent */ |
| 120 |
#define DSCR_CMD0_SM (0x1 << 10) /* Stride mode */ |
| 121 |
#define DSCR_CMD0_IE (0x1 << 8) /* Interrupt Enable */ |
| 122 |
#define DSCR_CMD0_SP (0x1 << 4) /* Status pointer select */ |
| 123 |
#define DSCR_CMD0_CV (0x1 << 2) /* Clear Valid when done */ |
| 124 |
#define DSCR_CMD0_ST_MASK (0x3 << 0) /* Status instruction */ |
| 125 |
|
| 126 |
#define SW_STATUS_INUSE (1 << 0) |
| 127 |
|
| 128 |
/* Command 0 device IDs. */ |
| 129 |
#define AU1550_DSCR_CMD0_UART0_TX 0 |
| 130 |
#define AU1550_DSCR_CMD0_UART0_RX 1 |
| 131 |
#define AU1550_DSCR_CMD0_UART3_TX 2 |
| 132 |
#define AU1550_DSCR_CMD0_UART3_RX 3 |
| 133 |
#define AU1550_DSCR_CMD0_DMA_REQ0 4 |
| 134 |
#define AU1550_DSCR_CMD0_DMA_REQ1 5 |
| 135 |
#define AU1550_DSCR_CMD0_DMA_REQ2 6 |
| 136 |
#define AU1550_DSCR_CMD0_DMA_REQ3 7 |
| 137 |
#define AU1550_DSCR_CMD0_USBDEV_RX0 8 |
| 138 |
#define AU1550_DSCR_CMD0_USBDEV_TX0 9 |
| 139 |
#define AU1550_DSCR_CMD0_USBDEV_TX1 10 |
| 140 |
#define AU1550_DSCR_CMD0_USBDEV_TX2 11 |
| 141 |
#define AU1550_DSCR_CMD0_USBDEV_RX3 12 |
| 142 |
#define AU1550_DSCR_CMD0_USBDEV_RX4 13 |
| 143 |
#define AU1550_DSCR_CMD0_PSC0_TX 14 |
| 144 |
#define AU1550_DSCR_CMD0_PSC0_RX 15 |
| 145 |
#define AU1550_DSCR_CMD0_PSC1_TX 16 |
| 146 |
#define AU1550_DSCR_CMD0_PSC1_RX 17 |
| 147 |
#define AU1550_DSCR_CMD0_PSC2_TX 18 |
| 148 |
#define AU1550_DSCR_CMD0_PSC2_RX 19 |
| 149 |
#define AU1550_DSCR_CMD0_PSC3_TX 20 |
| 150 |
#define AU1550_DSCR_CMD0_PSC3_RX 21 |
| 151 |
#define AU1550_DSCR_CMD0_PCI_WRITE 22 |
| 152 |
#define AU1550_DSCR_CMD0_NAND_FLASH 23 |
| 153 |
#define AU1550_DSCR_CMD0_MAC0_RX 24 |
| 154 |
#define AU1550_DSCR_CMD0_MAC0_TX 25 |
| 155 |
#define AU1550_DSCR_CMD0_MAC1_RX 26 |
| 156 |
#define AU1550_DSCR_CMD0_MAC1_TX 27 |
| 157 |
|
| 158 |
#define AU1200_DSCR_CMD0_UART0_TX 0 |
| 159 |
#define AU1200_DSCR_CMD0_UART0_RX 1 |
| 160 |
#define AU1200_DSCR_CMD0_UART1_TX 2 |
| 161 |
#define AU1200_DSCR_CMD0_UART1_RX 3 |
| 162 |
#define AU1200_DSCR_CMD0_DMA_REQ0 4 |
| 163 |
#define AU1200_DSCR_CMD0_DMA_REQ1 5 |
| 164 |
#define AU1200_DSCR_CMD0_MAE_BE 6 |
| 165 |
#define AU1200_DSCR_CMD0_MAE_FE 7 |
| 166 |
#define AU1200_DSCR_CMD0_SDMS_TX0 8 |
| 167 |
#define AU1200_DSCR_CMD0_SDMS_RX0 9 |
| 168 |
#define AU1200_DSCR_CMD0_SDMS_TX1 10 |
| 169 |
#define AU1200_DSCR_CMD0_SDMS_RX1 11 |
| 170 |
#define AU1200_DSCR_CMD0_AES_TX 13 |
| 171 |
#define AU1200_DSCR_CMD0_AES_RX 12 |
| 172 |
#define AU1200_DSCR_CMD0_PSC0_TX 14 |
| 173 |
#define AU1200_DSCR_CMD0_PSC0_RX 15 |
| 174 |
#define AU1200_DSCR_CMD0_PSC1_TX 16 |
| 175 |
#define AU1200_DSCR_CMD0_PSC1_RX 17 |
| 176 |
#define AU1200_DSCR_CMD0_CIM_RXA 18 |
| 177 |
#define AU1200_DSCR_CMD0_CIM_RXB 19 |
| 178 |
#define AU1200_DSCR_CMD0_CIM_RXC 20 |
| 179 |
#define AU1200_DSCR_CMD0_MAE_BOTH 21 |
| 180 |
#define AU1200_DSCR_CMD0_LCD 22 |
| 181 |
#define AU1200_DSCR_CMD0_NAND_FLASH 23 |
| 182 |
#define AU1200_DSCR_CMD0_PSC0_SYNC 24 |
| 183 |
#define AU1200_DSCR_CMD0_PSC1_SYNC 25 |
| 184 |
#define AU1200_DSCR_CMD0_CIM_SYNC 26 |
| 185 |
|
| 186 |
#define AU1300_DSCR_CMD0_UART0_TX 0 |
| 187 |
#define AU1300_DSCR_CMD0_UART0_RX 1 |
| 188 |
#define AU1300_DSCR_CMD0_UART1_TX 2 |
| 189 |
#define AU1300_DSCR_CMD0_UART1_RX 3 |
| 190 |
#define AU1300_DSCR_CMD0_UART2_TX 4 |
| 191 |
#define AU1300_DSCR_CMD0_UART2_RX 5 |
| 192 |
#define AU1300_DSCR_CMD0_UART3_TX 6 |
| 193 |
#define AU1300_DSCR_CMD0_UART3_RX 7 |
| 194 |
#define AU1300_DSCR_CMD0_SDMS_TX0 8 |
| 195 |
#define AU1300_DSCR_CMD0_SDMS_RX0 9 |
| 196 |
#define AU1300_DSCR_CMD0_SDMS_TX1 10 |
| 197 |
#define AU1300_DSCR_CMD0_SDMS_RX1 11 |
| 198 |
#define AU1300_DSCR_CMD0_AES_TX 12 |
| 199 |
#define AU1300_DSCR_CMD0_AES_RX 13 |
| 200 |
#define AU1300_DSCR_CMD0_PSC0_TX 14 |
| 201 |
#define AU1300_DSCR_CMD0_PSC0_RX 15 |
| 202 |
#define AU1300_DSCR_CMD0_PSC1_TX 16 |
| 203 |
#define AU1300_DSCR_CMD0_PSC1_RX 17 |
| 204 |
#define AU1300_DSCR_CMD0_PSC2_TX 18 |
| 205 |
#define AU1300_DSCR_CMD0_PSC2_RX 19 |
| 206 |
#define AU1300_DSCR_CMD0_PSC3_TX 20 |
| 207 |
#define AU1300_DSCR_CMD0_PSC3_RX 21 |
| 208 |
#define AU1300_DSCR_CMD0_LCD 22 |
| 209 |
#define AU1300_DSCR_CMD0_NAND_FLASH 23 |
| 210 |
#define AU1300_DSCR_CMD0_SDMS_TX2 24 |
| 211 |
#define AU1300_DSCR_CMD0_SDMS_RX2 25 |
| 212 |
#define AU1300_DSCR_CMD0_CIM_SYNC 26 |
| 213 |
#define AU1300_DSCR_CMD0_UDMA 27 |
| 214 |
#define AU1300_DSCR_CMD0_DMA_REQ0 28 |
| 215 |
#define AU1300_DSCR_CMD0_DMA_REQ1 29 |
| 216 |
|
| 217 |
#define DSCR_CMD0_THROTTLE 30 |
| 218 |
#define DSCR_CMD0_ALWAYS 31 |
| 219 |
#define DSCR_NDEV_IDS 32 |
| 220 |
/* This macro is used to find/create custom device types */ |
| 221 |
#define DSCR_DEV2CUSTOM_ID(x, d) (((((x) & 0xFFFF) << 8) | 0x32000000) | \ |
| 222 |
((d) & 0xFF)) |
| 223 |
#define DSCR_CUSTOM2DEV_ID(x) ((x) & 0xFF) |
| 224 |
|
| 225 |
#define DSCR_CMD0_SID(x) (((x) & 0x1f) << 25) |
| 226 |
#define DSCR_CMD0_DID(x) (((x) & 0x1f) << 20) |
| 227 |
|
| 228 |
/* Source/Destination transfer width. */ |
| 229 |
#define DSCR_CMD0_BYTE 0 |
| 230 |
#define DSCR_CMD0_HALFWORD 1 |
| 231 |
#define DSCR_CMD0_WORD 2 |
| 232 |
|
| 233 |
#define DSCR_CMD0_SW(x) (((x) & 0x3) << 18) |
| 234 |
#define DSCR_CMD0_DW(x) (((x) & 0x3) << 16) |
| 235 |
|
| 236 |
/* DDMA Descriptor Type. */ |
| 237 |
#define DSCR_CMD0_STANDARD 0 |
| 238 |
#define DSCR_CMD0_LITERAL 1 |
| 239 |
#define DSCR_CMD0_CMP_BRANCH 2 |
| 240 |
|
| 241 |
#define DSCR_CMD0_DT(x) (((x) & 0x3) << 13) |
| 242 |
|
| 243 |
/* Status Instruction. */ |
| 244 |
#define DSCR_CMD0_ST_NOCHANGE 0 /* Don't change */ |
| 245 |
#define DSCR_CMD0_ST_CURRENT 1 /* Write current status */ |
| 246 |
#define DSCR_CMD0_ST_CMD0 2 /* Write cmd0 with V cleared */ |
| 247 |
#define DSCR_CMD0_ST_BYTECNT 3 /* Write remaining byte count */ |
| 248 |
|
| 249 |
#define DSCR_CMD0_ST(x) (((x) & 0x3) << 0) |
| 250 |
|
| 251 |
/* Descriptor Command 1. */ |
| 252 |
#define DSCR_CMD1_SUPTR_MASK (0xf << 28) /* upper 4 bits of src addr */ |
| 253 |
#define DSCR_CMD1_DUPTR_MASK (0xf << 24) /* upper 4 bits of dest addr */ |
| 254 |
#define DSCR_CMD1_FL_MASK (0x3 << 22) /* Flag bits */ |
| 255 |
#define DSCR_CMD1_BC_MASK (0x3fffff) /* Byte count */ |
| 256 |
|
| 257 |
/* Flag description. */ |
| 258 |
#define DSCR_CMD1_FL_MEM_STRIDE0 0 |
| 259 |
#define DSCR_CMD1_FL_MEM_STRIDE1 1 |
| 260 |
#define DSCR_CMD1_FL_MEM_STRIDE2 2 |
| 261 |
|
| 262 |
#define DSCR_CMD1_FL(x) (((x) & 0x3) << 22) |
| 263 |
|
| 264 |
/* Source1, 1-dimensional stride. */ |
| 265 |
#define DSCR_SRC1_STS_MASK (3 << 30) /* Src xfer size */ |
| 266 |
#define DSCR_SRC1_SAM_MASK (3 << 28) /* Src xfer movement */ |
| 267 |
#define DSCR_SRC1_SB_MASK (0x3fff << 14) /* Block size */ |
| 268 |
#define DSCR_SRC1_SB(x) (((x) & 0x3fff) << 14) |
| 269 |
#define DSCR_SRC1_SS_MASK (0x3fff << 0) /* Stride */ |
| 270 |
#define DSCR_SRC1_SS(x) (((x) & 0x3fff) << 0) |
| 271 |
|
| 272 |
/* Dest1, 1-dimensional stride. */ |
| 273 |
#define DSCR_DEST1_DTS_MASK (3 << 30) /* Dest xfer size */ |
| 274 |
#define DSCR_DEST1_DAM_MASK (3 << 28) /* Dest xfer movement */ |
| 275 |
#define DSCR_DEST1_DB_MASK (0x3fff << 14) /* Block size */ |
| 276 |
#define DSCR_DEST1_DB(x) (((x) & 0x3fff) << 14) |
| 277 |
#define DSCR_DEST1_DS_MASK (0x3fff << 0) /* Stride */ |
| 278 |
#define DSCR_DEST1_DS(x) (((x) & 0x3fff) << 0) |
| 279 |
|
| 280 |
#define DSCR_xTS_SIZE1 0 |
| 281 |
#define DSCR_xTS_SIZE2 1 |
| 282 |
#define DSCR_xTS_SIZE4 2 |
| 283 |
#define DSCR_xTS_SIZE8 3 |
| 284 |
#define DSCR_SRC1_STS(x) (((x) & 3) << 30) |
| 285 |
#define DSCR_DEST1_DTS(x) (((x) & 3) << 30) |
| 286 |
|
| 287 |
#define DSCR_xAM_INCREMENT 0 |
| 288 |
#define DSCR_xAM_DECREMENT 1 |
| 289 |
#define DSCR_xAM_STATIC 2 |
| 290 |
#define DSCR_xAM_BURST 3 |
| 291 |
#define DSCR_SRC1_SAM(x) (((x) & 3) << 28) |
| 292 |
#define DSCR_DEST1_DAM(x) (((x) & 3) << 28) |
| 293 |
|
| 294 |
/* The next descriptor pointer. */ |
| 295 |
#define DSCR_NXTPTR_MASK (0x07ffffff) |
| 296 |
#define DSCR_NXTPTR(x) ((x) >> 5) |
| 297 |
#define DSCR_GET_NXTPTR(x) ((x) << 5) |
| 298 |
#define DSCR_NXTPTR_MS (1 << 27) |
| 299 |
|
| 300 |
/* The number of DBDMA channels. */ |
| 301 |
#define NUM_DBDMA_CHANS 16 |
| 302 |
|
| 303 |
/* |
| 304 |
* DDMA API definitions |
| 305 |
* FIXME: may not fit to this header file |
| 306 |
*/ |
| 307 |
typedef struct dbdma_device_table { |
| 308 |
u32 dev_id; |
| 309 |
u32 dev_flags; |
| 310 |
u32 dev_tsize; |
| 311 |
u32 dev_devwidth; |
| 312 |
u32 dev_physaddr; /* If FIFO */ |
| 313 |
u32 dev_intlevel; |
| 314 |
u32 dev_intpolarity; |
| 315 |
} dbdev_tab_t; |
| 316 |
|
| 317 |
|
| 318 |
typedef struct dbdma_chan_config { |
| 319 |
spinlock_t lock; |
| 320 |
|
| 321 |
u32 chan_flags; |
| 322 |
u32 chan_index; |
| 323 |
dbdev_tab_t *chan_src; |
| 324 |
dbdev_tab_t *chan_dest; |
| 325 |
au1x_dma_chan_t *chan_ptr; |
| 326 |
au1x_ddma_desc_t *chan_desc_base; |
| 327 |
u32 cdb_membase; /* kmalloc base of above */ |
| 328 |
au1x_ddma_desc_t *get_ptr, *put_ptr, *cur_ptr; |
| 329 |
void *chan_callparam; |
| 330 |
void (*chan_callback)(int, void *); |
| 331 |
} chan_tab_t; |
| 332 |
|
| 333 |
#define DEV_FLAGS_INUSE (1 << 0) |
| 334 |
#define DEV_FLAGS_ANYUSE (1 << 1) |
| 335 |
#define DEV_FLAGS_OUT (1 << 2) |
| 336 |
#define DEV_FLAGS_IN (1 << 3) |
| 337 |
#define DEV_FLAGS_BURSTABLE (1 << 4) |
| 338 |
#define DEV_FLAGS_SYNC (1 << 5) |
| 339 |
/* end DDMA API definitions */ |
| 340 |
|
| 341 |
/* |
| 342 |
* External functions for drivers to use. |
| 343 |
* Use this to allocate a DBDMA channel. The device IDs are one of |
| 344 |
* the DSCR_CMD0 devices IDs, which is usually redefined to a more |
| 345 |
* meaningful name. The 'callback' is called during DMA completion |
| 346 |
* interrupt. |
| 347 |
*/ |
| 348 |
extern u32 au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid, |
| 349 |
void (*callback)(int, void *), |
| 350 |
void *callparam); |
| 351 |
|
| 352 |
#define DBDMA_MEM_CHAN DSCR_CMD0_ALWAYS |
| 353 |
|
| 354 |
/* Set the device width of an in/out FIFO. */ |
| 355 |
u32 au1xxx_dbdma_set_devwidth(u32 chanid, int bits); |
| 356 |
|
| 357 |
/* Allocate a ring of descriptors for DBDMA. */ |
| 358 |
u32 au1xxx_dbdma_ring_alloc(u32 chanid, int entries); |
| 359 |
|
| 360 |
/* Put buffers on source/destination descriptors. */ |
| 361 |
u32 au1xxx_dbdma_put_source(u32 chanid, dma_addr_t buf, int nbytes, u32 flags); |
| 362 |
u32 au1xxx_dbdma_put_dest(u32 chanid, dma_addr_t buf, int nbytes, u32 flags); |
| 363 |
|
| 364 |
/* Get a buffer from the destination descriptor. */ |
| 365 |
u32 au1xxx_dbdma_get_dest(u32 chanid, void **buf, int *nbytes); |
| 366 |
|
| 367 |
void au1xxx_dbdma_stop(u32 chanid); |
| 368 |
void au1xxx_dbdma_start(u32 chanid); |
| 369 |
void au1xxx_dbdma_reset(u32 chanid); |
| 370 |
u32 au1xxx_get_dma_residue(u32 chanid); |
| 371 |
|
| 372 |
void au1xxx_dbdma_chan_free(u32 chanid); |
| 373 |
void au1xxx_dbdma_dump(u32 chanid); |
| 374 |
|
| 375 |
u32 au1xxx_dbdma_put_dscr(u32 chanid, au1x_ddma_desc_t *dscr); |
| 376 |
|
| 377 |
u32 au1xxx_ddma_add_device(dbdev_tab_t *dev); |
| 378 |
extern void au1xxx_ddma_del_device(u32 devid); |
| 379 |
void *au1xxx_ddma_get_nextptr_virt(au1x_ddma_desc_t *dp); |
| 380 |
|
| 381 |
/* |
| 382 |
* Flags for the put_source/put_dest functions. |
| 383 |
*/ |
| 384 |
#define DDMA_FLAGS_IE (1 << 0) |
| 385 |
#define DDMA_FLAGS_NOIE (1 << 1) |
| 386 |
|
| 387 |
#endif /* _LANGUAGE_ASSEMBLY */ |
| 388 |
#endif /* _AU1000_DBDMA_H_ */ |