| 1 |
/* SPDX-License-Identifier: GPL-2.0 */ |
| 2 |
#ifndef __ASM_MACH_ATH25_PLATFORM_H |
| 3 |
#define __ASM_MACH_ATH25_PLATFORM_H |
| 4 |
|
| 5 |
#include <linux/etherdevice.h> |
| 6 |
|
| 7 |
/* |
| 8 |
* This is board-specific data that is stored in a "fixed" location in flash. |
| 9 |
* It is shared across operating systems, so it should not be changed lightly. |
| 10 |
* The main reason we need it is in order to extract the ethernet MAC |
| 11 |
* address(es). |
| 12 |
*/ |
| 13 |
struct ath25_boarddata { |
| 14 |
u32 magic; /* board data is valid */ |
| 15 |
#define ATH25_BD_MAGIC 0x35333131 /* "5311", for all 531x/231x platforms */ |
| 16 |
u16 cksum; /* checksum (starting with BD_REV 2) */ |
| 17 |
u16 rev; /* revision of this struct */ |
| 18 |
#define BD_REV 4 |
| 19 |
char board_name[64]; /* Name of board */ |
| 20 |
u16 major; /* Board major number */ |
| 21 |
u16 minor; /* Board minor number */ |
| 22 |
u32 flags; /* Board configuration */ |
| 23 |
#define BD_ENET0 0x00000001 /* ENET0 is stuffed */ |
| 24 |
#define BD_ENET1 0x00000002 /* ENET1 is stuffed */ |
| 25 |
#define BD_UART1 0x00000004 /* UART1 is stuffed */ |
| 26 |
#define BD_UART0 0x00000008 /* UART0 is stuffed (dma) */ |
| 27 |
#define BD_RSTFACTORY 0x00000010 /* Reset factory defaults stuffed */ |
| 28 |
#define BD_SYSLED 0x00000020 /* System LED stuffed */ |
| 29 |
#define BD_EXTUARTCLK 0x00000040 /* External UART clock */ |
| 30 |
#define BD_CPUFREQ 0x00000080 /* cpu freq is valid in nvram */ |
| 31 |
#define BD_SYSFREQ 0x00000100 /* sys freq is set in nvram */ |
| 32 |
#define BD_WLAN0 0x00000200 /* Enable WLAN0 */ |
| 33 |
#define BD_MEMCAP 0x00000400 /* CAP SDRAM @ mem_cap for testing */ |
| 34 |
#define BD_DISWATCHDOG 0x00000800 /* disable system watchdog */ |
| 35 |
#define BD_WLAN1 0x00001000 /* Enable WLAN1 (ar5212) */ |
| 36 |
#define BD_ISCASPER 0x00002000 /* FLAG for AR2312 */ |
| 37 |
#define BD_WLAN0_2G_EN 0x00004000 /* FLAG for radio0_2G */ |
| 38 |
#define BD_WLAN0_5G_EN 0x00008000 /* FLAG for radio0_2G */ |
| 39 |
#define BD_WLAN1_2G_EN 0x00020000 /* FLAG for radio0_2G */ |
| 40 |
#define BD_WLAN1_5G_EN 0x00040000 /* FLAG for radio0_2G */ |
| 41 |
u16 reset_config_gpio; /* Reset factory GPIO pin */ |
| 42 |
u16 sys_led_gpio; /* System LED GPIO pin */ |
| 43 |
|
| 44 |
u32 cpu_freq; /* CPU core frequency in Hz */ |
| 45 |
u32 sys_freq; /* System frequency in Hz */ |
| 46 |
u32 cnt_freq; /* Calculated C0_COUNT frequency */ |
| 47 |
|
| 48 |
u8 wlan0_mac[ETH_ALEN]; |
| 49 |
u8 enet0_mac[ETH_ALEN]; |
| 50 |
u8 enet1_mac[ETH_ALEN]; |
| 51 |
|
| 52 |
u16 pci_id; /* Pseudo PCIID for common code */ |
| 53 |
u16 mem_cap; /* cap bank1 in MB */ |
| 54 |
|
| 55 |
/* version 3 */ |
| 56 |
u8 wlan1_mac[ETH_ALEN]; /* (ar5212) */ |
| 57 |
}; |
| 58 |
|
| 59 |
#define BOARD_CONFIG_BUFSZ 0x1000 |
| 60 |
|
| 61 |
/* |
| 62 |
* Platform device information for the Wireless MAC |
| 63 |
*/ |
| 64 |
struct ar231x_board_config { |
| 65 |
u16 devid; |
| 66 |
|
| 67 |
/* board config data */ |
| 68 |
struct ath25_boarddata *config; |
| 69 |
|
| 70 |
/* radio calibration data */ |
| 71 |
const char *radio; |
| 72 |
}; |
| 73 |
|
| 74 |
#endif /* __ASM_MACH_ATH25_PLATFORM_H */ |