| 1 |
/* |
| 2 |
* Hardware info about DECstation 5000/200 systems (otherwise known as |
| 3 |
* 3max or KN02). |
| 4 |
* |
| 5 |
* This file is subject to the terms and conditions of the GNU General Public |
| 6 |
* License. See the file "COPYING" in the main directory of this archive |
| 7 |
* for more details. |
| 8 |
* |
| 9 |
* Copyright (C) 1995,1996 by Paul M. Antoine, some code and definitions |
| 10 |
* are by courtesy of Chris Fraser. |
| 11 |
* Copyright (C) 2002, 2003, 2005 Maciej W. Rozycki |
| 12 |
*/ |
| 13 |
#ifndef __ASM_MIPS_DEC_KN02_H |
| 14 |
#define __ASM_MIPS_DEC_KN02_H |
| 15 |
|
| 16 |
#define KN02_SLOT_BASE 0x1fc00000 |
| 17 |
#define KN02_SLOT_SIZE 0x00080000 |
| 18 |
|
| 19 |
/* |
| 20 |
* Address ranges decoded by the "system slot" logic for onboard devices. |
| 21 |
*/ |
| 22 |
#define KN02_SYS_ROM (0*KN02_SLOT_SIZE) /* system board ROM */ |
| 23 |
#define KN02_RES_1 (1*KN02_SLOT_SIZE) /* unused */ |
| 24 |
#define KN02_CHKSYN (2*KN02_SLOT_SIZE) /* ECC syndrome */ |
| 25 |
#define KN02_ERRADDR (3*KN02_SLOT_SIZE) /* bus error address */ |
| 26 |
#define KN02_DZ11 (4*KN02_SLOT_SIZE) /* DZ11 (DC7085) serial */ |
| 27 |
#define KN02_RTC (5*KN02_SLOT_SIZE) /* DS1287 RTC */ |
| 28 |
#define KN02_CSR (6*KN02_SLOT_SIZE) /* system ctrl & status reg */ |
| 29 |
#define KN02_SYS_ROM_7 (7*KN02_SLOT_SIZE) /* system board ROM (alias) */ |
| 30 |
|
| 31 |
|
| 32 |
/* |
| 33 |
* System Control & Status Register bits. |
| 34 |
*/ |
| 35 |
#define KN02_CSR_RES_28 (0xf<<28) /* unused */ |
| 36 |
#define KN02_CSR_PSU (1<<27) /* power supply unit warning */ |
| 37 |
#define KN02_CSR_NVRAM (1<<26) /* ~NVRAM clear jumper */ |
| 38 |
#define KN02_CSR_REFEVEN (1<<25) /* mem refresh bank toggle */ |
| 39 |
#define KN02_CSR_NRMOD (1<<24) /* ~NRMOD manufact. jumper */ |
| 40 |
#define KN02_CSR_IOINTEN (0xff<<16) /* IRQ mask bits */ |
| 41 |
#define KN02_CSR_DIAGCHK (1<<15) /* diagn/norml ECC reads */ |
| 42 |
#define KN02_CSR_DIAGGEN (1<<14) /* diagn/norml ECC writes */ |
| 43 |
#define KN02_CSR_CORRECT (1<<13) /* ECC correct/check */ |
| 44 |
#define KN02_CSR_LEDIAG (1<<12) /* ECC diagn. latch strobe */ |
| 45 |
#define KN02_CSR_TXDIS (1<<11) /* DZ11 transmit disable */ |
| 46 |
#define KN02_CSR_BNK32M (1<<10) /* 32M/8M stride */ |
| 47 |
#define KN02_CSR_DIAGDN (1<<9) /* DIAGDN manufact. jumper */ |
| 48 |
#define KN02_CSR_BAUD38 (1<<8) /* DZ11 38/19kbps ext. rate */ |
| 49 |
#define KN02_CSR_IOINT (0xff<<0) /* IRQ status bits (r/o) */ |
| 50 |
#define KN02_CSR_LEDS (0xff<<0) /* ~diagnostic LEDs (w/o) */ |
| 51 |
|
| 52 |
|
| 53 |
/* |
| 54 |
* CPU interrupt bits. |
| 55 |
*/ |
| 56 |
#define KN02_CPU_INR_RES_6 6 /* unused */ |
| 57 |
#define KN02_CPU_INR_BUS 5 /* memory, I/O bus read/write errors */ |
| 58 |
#define KN02_CPU_INR_RES_4 4 /* unused */ |
| 59 |
#define KN02_CPU_INR_RTC 3 /* DS1287 RTC */ |
| 60 |
#define KN02_CPU_INR_CASCADE 2 /* CSR cascade */ |
| 61 |
|
| 62 |
/* |
| 63 |
* CSR interrupt bits. |
| 64 |
*/ |
| 65 |
#define KN02_CSR_INR_DZ11 7 /* DZ11 (DC7085) serial */ |
| 66 |
#define KN02_CSR_INR_LANCE 6 /* LANCE (Am7990) Ethernet */ |
| 67 |
#define KN02_CSR_INR_ASC 5 /* ASC (NCR53C94) SCSI */ |
| 68 |
#define KN02_CSR_INR_RES_4 4 /* unused */ |
| 69 |
#define KN02_CSR_INR_RES_3 3 /* unused */ |
| 70 |
#define KN02_CSR_INR_TC2 2 /* TURBOchannel slot #2 */ |
| 71 |
#define KN02_CSR_INR_TC1 1 /* TURBOchannel slot #1 */ |
| 72 |
#define KN02_CSR_INR_TC0 0 /* TURBOchannel slot #0 */ |
| 73 |
|
| 74 |
|
| 75 |
#define KN02_IRQ_BASE 8 /* first IRQ assigned to CSR */ |
| 76 |
#define KN02_IRQ_LINES 8 /* number of CSR interrupts */ |
| 77 |
|
| 78 |
#define KN02_IRQ_NR(n) ((n) + KN02_IRQ_BASE) |
| 79 |
#define KN02_IRQ_MASK(n) (1 << (n)) |
| 80 |
#define KN02_IRQ_ALL 0xff |
| 81 |
|
| 82 |
|
| 83 |
#ifndef __ASSEMBLER__ |
| 84 |
|
| 85 |
#include <linux/types.h> |
| 86 |
|
| 87 |
extern u32 cached_kn02_csr; |
| 88 |
extern void init_kn02_irqs(int base); |
| 89 |
#endif |
| 90 |
|
| 91 |
#endif /* __ASM_MIPS_DEC_KN02_H */ |