| 1 |
// SPDX-License-Identifier: GPL-2.0+ OR MIT |
| 2 |
// |
| 3 |
// Device Tree Source for UniPhier sLD8 SoC |
| 4 |
// |
| 5 |
// Copyright (C) 2015-2016 Socionext Inc. |
| 6 |
// Author: Masahiro Yamada <[email protected]> |
| 7 |
|
| 8 |
#include <dt-bindings/gpio/uniphier-gpio.h> |
| 9 |
#include <dt-bindings/interrupt-controller/arm-gic.h> |
| 10 |
|
| 11 |
/ { |
| 12 |
compatible = "socionext,uniphier-sld8"; |
| 13 |
#address-cells = <1>; |
| 14 |
#size-cells = <1>; |
| 15 |
|
| 16 |
cpus { |
| 17 |
#address-cells = <1>; |
| 18 |
#size-cells = <0>; |
| 19 |
|
| 20 |
cpu@0 { |
| 21 |
device_type = "cpu"; |
| 22 |
compatible = "arm,cortex-a9"; |
| 23 |
reg = <0>; |
| 24 |
enable-method = "psci"; |
| 25 |
next-level-cache = <&l2>; |
| 26 |
}; |
| 27 |
}; |
| 28 |
|
| 29 |
psci { |
| 30 |
compatible = "arm,psci-0.2"; |
| 31 |
method = "smc"; |
| 32 |
}; |
| 33 |
|
| 34 |
clocks { |
| 35 |
refclk: ref { |
| 36 |
compatible = "fixed-clock"; |
| 37 |
#clock-cells = <0>; |
| 38 |
clock-frequency = <25000000>; |
| 39 |
}; |
| 40 |
|
| 41 |
arm_timer_clk: arm-timer { |
| 42 |
#clock-cells = <0>; |
| 43 |
compatible = "fixed-clock"; |
| 44 |
clock-frequency = <50000000>; |
| 45 |
}; |
| 46 |
}; |
| 47 |
|
| 48 |
soc { |
| 49 |
compatible = "simple-bus"; |
| 50 |
#address-cells = <1>; |
| 51 |
#size-cells = <1>; |
| 52 |
ranges; |
| 53 |
interrupt-parent = <&intc>; |
| 54 |
|
| 55 |
l2: cache-controller@500c0000 { |
| 56 |
compatible = "socionext,uniphier-system-cache"; |
| 57 |
reg = <0x500c0000 0x2000>, <0x503c0100 0x4>, |
| 58 |
<0x506c0000 0x400>; |
| 59 |
interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>, |
| 60 |
<GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>; |
| 61 |
cache-unified; |
| 62 |
cache-size = <(256 * 1024)>; |
| 63 |
cache-sets = <256>; |
| 64 |
cache-line-size = <128>; |
| 65 |
cache-level = <2>; |
| 66 |
}; |
| 67 |
|
| 68 |
spi: spi@54006000 { |
| 69 |
compatible = "socionext,uniphier-scssi"; |
| 70 |
status = "disabled"; |
| 71 |
reg = <0x54006000 0x100>; |
| 72 |
#address-cells = <1>; |
| 73 |
#size-cells = <0>; |
| 74 |
interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; |
| 75 |
pinctrl-names = "default"; |
| 76 |
pinctrl-0 = <&pinctrl_spi0>; |
| 77 |
clocks = <&peri_clk 11>; |
| 78 |
resets = <&peri_rst 11>; |
| 79 |
}; |
| 80 |
|
| 81 |
serial0: serial@54006800 { |
| 82 |
compatible = "socionext,uniphier-uart"; |
| 83 |
status = "disabled"; |
| 84 |
reg = <0x54006800 0x40>; |
| 85 |
interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; |
| 86 |
pinctrl-names = "default"; |
| 87 |
pinctrl-0 = <&pinctrl_uart0>; |
| 88 |
clocks = <&peri_clk 0>; |
| 89 |
resets = <&peri_rst 0>; |
| 90 |
}; |
| 91 |
|
| 92 |
serial1: serial@54006900 { |
| 93 |
compatible = "socionext,uniphier-uart"; |
| 94 |
status = "disabled"; |
| 95 |
reg = <0x54006900 0x40>; |
| 96 |
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; |
| 97 |
pinctrl-names = "default"; |
| 98 |
pinctrl-0 = <&pinctrl_uart1>; |
| 99 |
clocks = <&peri_clk 1>; |
| 100 |
resets = <&peri_rst 1>; |
| 101 |
}; |
| 102 |
|
| 103 |
serial2: serial@54006a00 { |
| 104 |
compatible = "socionext,uniphier-uart"; |
| 105 |
status = "disabled"; |
| 106 |
reg = <0x54006a00 0x40>; |
| 107 |
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; |
| 108 |
pinctrl-names = "default"; |
| 109 |
pinctrl-0 = <&pinctrl_uart2>; |
| 110 |
clocks = <&peri_clk 2>; |
| 111 |
resets = <&peri_rst 2>; |
| 112 |
}; |
| 113 |
|
| 114 |
serial3: serial@54006b00 { |
| 115 |
compatible = "socionext,uniphier-uart"; |
| 116 |
status = "disabled"; |
| 117 |
reg = <0x54006b00 0x40>; |
| 118 |
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; |
| 119 |
pinctrl-names = "default"; |
| 120 |
pinctrl-0 = <&pinctrl_uart3>; |
| 121 |
clocks = <&peri_clk 3>; |
| 122 |
resets = <&peri_rst 3>; |
| 123 |
}; |
| 124 |
|
| 125 |
gpio: gpio@55000000 { |
| 126 |
compatible = "socionext,uniphier-gpio"; |
| 127 |
reg = <0x55000000 0x200>; |
| 128 |
interrupt-parent = <&aidet>; |
| 129 |
interrupt-controller; |
| 130 |
#interrupt-cells = <2>; |
| 131 |
gpio-controller; |
| 132 |
#gpio-cells = <2>; |
| 133 |
gpio-ranges = <&pinctrl 0 0 0>, |
| 134 |
<&pinctrl 104 0 0>, |
| 135 |
<&pinctrl 112 0 0>; |
| 136 |
gpio-ranges-group-names = "gpio_range0", |
| 137 |
"gpio_range1", |
| 138 |
"gpio_range2"; |
| 139 |
ngpios = <136>; |
| 140 |
socionext,interrupt-ranges = <0 48 13>, <14 62 2>; |
| 141 |
}; |
| 142 |
|
| 143 |
i2c0: i2c@58400000 { |
| 144 |
compatible = "socionext,uniphier-i2c"; |
| 145 |
status = "disabled"; |
| 146 |
reg = <0x58400000 0x40>; |
| 147 |
#address-cells = <1>; |
| 148 |
#size-cells = <0>; |
| 149 |
interrupts = <GIC_SPI 41 IRQ_TYPE_EDGE_RISING>; |
| 150 |
pinctrl-names = "default"; |
| 151 |
pinctrl-0 = <&pinctrl_i2c0>; |
| 152 |
clocks = <&peri_clk 4>; |
| 153 |
resets = <&peri_rst 4>; |
| 154 |
clock-frequency = <100000>; |
| 155 |
}; |
| 156 |
|
| 157 |
i2c1: i2c@58480000 { |
| 158 |
compatible = "socionext,uniphier-i2c"; |
| 159 |
status = "disabled"; |
| 160 |
reg = <0x58480000 0x40>; |
| 161 |
#address-cells = <1>; |
| 162 |
#size-cells = <0>; |
| 163 |
interrupts = <GIC_SPI 42 IRQ_TYPE_EDGE_RISING>; |
| 164 |
pinctrl-names = "default"; |
| 165 |
pinctrl-0 = <&pinctrl_i2c1>; |
| 166 |
clocks = <&peri_clk 5>; |
| 167 |
resets = <&peri_rst 5>; |
| 168 |
clock-frequency = <100000>; |
| 169 |
}; |
| 170 |
|
| 171 |
/* chip-internal connection for DMD */ |
| 172 |
i2c2: i2c@58500000 { |
| 173 |
compatible = "socionext,uniphier-i2c"; |
| 174 |
reg = <0x58500000 0x40>; |
| 175 |
#address-cells = <1>; |
| 176 |
#size-cells = <0>; |
| 177 |
interrupts = <GIC_SPI 43 IRQ_TYPE_EDGE_RISING>; |
| 178 |
pinctrl-names = "default"; |
| 179 |
pinctrl-0 = <&pinctrl_i2c2>; |
| 180 |
clocks = <&peri_clk 6>; |
| 181 |
resets = <&peri_rst 6>; |
| 182 |
clock-frequency = <400000>; |
| 183 |
}; |
| 184 |
|
| 185 |
i2c3: i2c@58580000 { |
| 186 |
compatible = "socionext,uniphier-i2c"; |
| 187 |
status = "disabled"; |
| 188 |
reg = <0x58580000 0x40>; |
| 189 |
#address-cells = <1>; |
| 190 |
#size-cells = <0>; |
| 191 |
interrupts = <GIC_SPI 44 IRQ_TYPE_EDGE_RISING>; |
| 192 |
pinctrl-names = "default"; |
| 193 |
pinctrl-0 = <&pinctrl_i2c3>; |
| 194 |
clocks = <&peri_clk 7>; |
| 195 |
resets = <&peri_rst 7>; |
| 196 |
clock-frequency = <100000>; |
| 197 |
}; |
| 198 |
|
| 199 |
system_bus: system-bus@58c00000 { |
| 200 |
compatible = "socionext,uniphier-system-bus"; |
| 201 |
status = "disabled"; |
| 202 |
reg = <0x58c00000 0x400>; |
| 203 |
#address-cells = <2>; |
| 204 |
#size-cells = <1>; |
| 205 |
pinctrl-names = "default"; |
| 206 |
pinctrl-0 = <&pinctrl_system_bus>; |
| 207 |
}; |
| 208 |
|
| 209 |
smpctrl@59801000 { |
| 210 |
compatible = "socionext,uniphier-smpctrl"; |
| 211 |
reg = <0x59801000 0x400>; |
| 212 |
}; |
| 213 |
|
| 214 |
mioctrl: syscon@59810000 { |
| 215 |
compatible = "socionext,uniphier-sld8-mioctrl", |
| 216 |
"simple-mfd", "syscon"; |
| 217 |
reg = <0x59810000 0x800>; |
| 218 |
|
| 219 |
mio_clk: clock-controller { |
| 220 |
compatible = "socionext,uniphier-sld8-mio-clock"; |
| 221 |
#clock-cells = <1>; |
| 222 |
}; |
| 223 |
|
| 224 |
mio_rst: reset-controller { |
| 225 |
compatible = "socionext,uniphier-sld8-mio-reset"; |
| 226 |
#reset-cells = <1>; |
| 227 |
}; |
| 228 |
}; |
| 229 |
|
| 230 |
syscon@59820000 { |
| 231 |
compatible = "socionext,uniphier-sld8-perictrl", |
| 232 |
"simple-mfd", "syscon"; |
| 233 |
reg = <0x59820000 0x200>; |
| 234 |
|
| 235 |
peri_clk: clock-controller { |
| 236 |
compatible = "socionext,uniphier-sld8-peri-clock"; |
| 237 |
#clock-cells = <1>; |
| 238 |
}; |
| 239 |
|
| 240 |
peri_rst: reset-controller { |
| 241 |
compatible = "socionext,uniphier-sld8-peri-reset"; |
| 242 |
#reset-cells = <1>; |
| 243 |
}; |
| 244 |
}; |
| 245 |
|
| 246 |
dmac: dma-controller@5a000000 { |
| 247 |
compatible = "socionext,uniphier-mio-dmac"; |
| 248 |
reg = <0x5a000000 0x1000>; |
| 249 |
interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, |
| 250 |
<GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, |
| 251 |
<GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>, |
| 252 |
<GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, |
| 253 |
<GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>, |
| 254 |
<GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, |
| 255 |
<GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; |
| 256 |
clocks = <&mio_clk 7>; |
| 257 |
resets = <&mio_rst 7>; |
| 258 |
#dma-cells = <1>; |
| 259 |
}; |
| 260 |
|
| 261 |
sd: mmc@5a400000 { |
| 262 |
compatible = "socionext,uniphier-sd-v2.91"; |
| 263 |
status = "disabled"; |
| 264 |
reg = <0x5a400000 0x200>; |
| 265 |
interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; |
| 266 |
pinctrl-names = "default", "uhs"; |
| 267 |
pinctrl-0 = <&pinctrl_sd>; |
| 268 |
pinctrl-1 = <&pinctrl_sd_uhs>; |
| 269 |
clocks = <&mio_clk 0>; |
| 270 |
reset-names = "host", "bridge"; |
| 271 |
resets = <&mio_rst 0>, <&mio_rst 3>; |
| 272 |
dma-names = "rx-tx"; |
| 273 |
dmas = <&dmac 4>; |
| 274 |
bus-width = <4>; |
| 275 |
cap-sd-highspeed; |
| 276 |
sd-uhs-sdr12; |
| 277 |
sd-uhs-sdr25; |
| 278 |
sd-uhs-sdr50; |
| 279 |
socionext,syscon-uhs-mode = <&mioctrl 0>; |
| 280 |
}; |
| 281 |
|
| 282 |
emmc: mmc@5a500000 { |
| 283 |
compatible = "socionext,uniphier-sd-v2.91"; |
| 284 |
status = "disabled"; |
| 285 |
reg = <0x5a500000 0x200>; |
| 286 |
interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; |
| 287 |
pinctrl-names = "default"; |
| 288 |
pinctrl-0 = <&pinctrl_emmc>; |
| 289 |
clocks = <&mio_clk 1>; |
| 290 |
reset-names = "host", "bridge", "hw"; |
| 291 |
resets = <&mio_rst 1>, <&mio_rst 4>, <&mio_rst 6>; |
| 292 |
dma-names = "rx-tx"; |
| 293 |
dmas = <&dmac 6>; |
| 294 |
bus-width = <8>; |
| 295 |
cap-mmc-highspeed; |
| 296 |
cap-mmc-hw-reset; |
| 297 |
non-removable; |
| 298 |
}; |
| 299 |
|
| 300 |
usb0: usb@5a800100 { |
| 301 |
compatible = "socionext,uniphier-ehci", "generic-ehci"; |
| 302 |
status = "disabled"; |
| 303 |
reg = <0x5a800100 0x100>; |
| 304 |
interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; |
| 305 |
pinctrl-names = "default"; |
| 306 |
pinctrl-0 = <&pinctrl_usb0>; |
| 307 |
clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 8>, |
| 308 |
<&mio_clk 12>; |
| 309 |
resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 8>, |
| 310 |
<&mio_rst 12>; |
| 311 |
has-transaction-translator; |
| 312 |
}; |
| 313 |
|
| 314 |
usb1: usb@5a810100 { |
| 315 |
compatible = "socionext,uniphier-ehci", "generic-ehci"; |
| 316 |
status = "disabled"; |
| 317 |
reg = <0x5a810100 0x100>; |
| 318 |
interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; |
| 319 |
pinctrl-names = "default"; |
| 320 |
pinctrl-0 = <&pinctrl_usb1>; |
| 321 |
clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 9>, |
| 322 |
<&mio_clk 13>; |
| 323 |
resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 9>, |
| 324 |
<&mio_rst 13>; |
| 325 |
has-transaction-translator; |
| 326 |
}; |
| 327 |
|
| 328 |
usb2: usb@5a820100 { |
| 329 |
compatible = "socionext,uniphier-ehci", "generic-ehci"; |
| 330 |
status = "disabled"; |
| 331 |
reg = <0x5a820100 0x100>; |
| 332 |
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; |
| 333 |
pinctrl-names = "default"; |
| 334 |
pinctrl-0 = <&pinctrl_usb2>; |
| 335 |
clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 10>, |
| 336 |
<&mio_clk 14>; |
| 337 |
resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 10>, |
| 338 |
<&mio_rst 14>; |
| 339 |
has-transaction-translator; |
| 340 |
}; |
| 341 |
|
| 342 |
syscon@5f800000 { |
| 343 |
compatible = "socionext,uniphier-sld8-soc-glue", |
| 344 |
"simple-mfd", "syscon"; |
| 345 |
reg = <0x5f800000 0x2000>; |
| 346 |
|
| 347 |
pinctrl: pinctrl { |
| 348 |
compatible = "socionext,uniphier-sld8-pinctrl"; |
| 349 |
}; |
| 350 |
}; |
| 351 |
|
| 352 |
syscon@5f900000 { |
| 353 |
compatible = "socionext,uniphier-sld8-soc-glue-debug", |
| 354 |
"simple-mfd", "syscon"; |
| 355 |
reg = <0x5f900000 0x2000>; |
| 356 |
#address-cells = <1>; |
| 357 |
#size-cells = <1>; |
| 358 |
ranges = <0 0x5f900000 0x2000>; |
| 359 |
|
| 360 |
efuse@100 { |
| 361 |
compatible = "socionext,uniphier-efuse"; |
| 362 |
reg = <0x100 0x28>; |
| 363 |
}; |
| 364 |
|
| 365 |
efuse@200 { |
| 366 |
compatible = "socionext,uniphier-efuse"; |
| 367 |
reg = <0x200 0x14>; |
| 368 |
}; |
| 369 |
}; |
| 370 |
|
| 371 |
timer@60000200 { |
| 372 |
compatible = "arm,cortex-a9-global-timer"; |
| 373 |
reg = <0x60000200 0x20>; |
| 374 |
interrupts = <GIC_PPI 11 |
| 375 |
(GIC_CPU_MASK_RAW(1) | IRQ_TYPE_LEVEL_HIGH)>; |
| 376 |
clocks = <&arm_timer_clk>; |
| 377 |
}; |
| 378 |
|
| 379 |
timer@60000600 { |
| 380 |
compatible = "arm,cortex-a9-twd-timer"; |
| 381 |
reg = <0x60000600 0x20>; |
| 382 |
interrupts = <GIC_PPI 13 |
| 383 |
(GIC_CPU_MASK_RAW(1) | IRQ_TYPE_LEVEL_HIGH)>; |
| 384 |
clocks = <&arm_timer_clk>; |
| 385 |
}; |
| 386 |
|
| 387 |
intc: interrupt-controller@60001000 { |
| 388 |
compatible = "arm,cortex-a9-gic"; |
| 389 |
reg = <0x60001000 0x1000>, |
| 390 |
<0x60000100 0x100>; |
| 391 |
#interrupt-cells = <3>; |
| 392 |
interrupt-controller; |
| 393 |
}; |
| 394 |
|
| 395 |
aidet: interrupt-controller@61830000 { |
| 396 |
compatible = "socionext,uniphier-sld8-aidet"; |
| 397 |
reg = <0x61830000 0x200>; |
| 398 |
interrupt-controller; |
| 399 |
#interrupt-cells = <2>; |
| 400 |
}; |
| 401 |
|
| 402 |
syscon@61840000 { |
| 403 |
compatible = "socionext,uniphier-sld8-sysctrl", |
| 404 |
"simple-mfd", "syscon"; |
| 405 |
reg = <0x61840000 0x10000>; |
| 406 |
|
| 407 |
sys_clk: clock-controller { |
| 408 |
compatible = "socionext,uniphier-sld8-clock"; |
| 409 |
#clock-cells = <1>; |
| 410 |
}; |
| 411 |
|
| 412 |
sys_rst: reset-controller { |
| 413 |
compatible = "socionext,uniphier-sld8-reset"; |
| 414 |
#reset-cells = <1>; |
| 415 |
}; |
| 416 |
}; |
| 417 |
|
| 418 |
nand: nand-controller@68000000 { |
| 419 |
compatible = "socionext,uniphier-denali-nand-v5a"; |
| 420 |
status = "disabled"; |
| 421 |
reg-names = "nand_data", "denali_reg"; |
| 422 |
reg = <0x68000000 0x20>, <0x68100000 0x1000>; |
| 423 |
#address-cells = <1>; |
| 424 |
#size-cells = <0>; |
| 425 |
interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; |
| 426 |
pinctrl-names = "default"; |
| 427 |
pinctrl-0 = <&pinctrl_nand>; |
| 428 |
clock-names = "nand", "nand_x", "ecc"; |
| 429 |
clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>; |
| 430 |
reset-names = "nand", "reg"; |
| 431 |
resets = <&sys_rst 2>, <&sys_rst 2>; |
| 432 |
}; |
| 433 |
}; |
| 434 |
}; |
| 435 |
|
| 436 |
#include "uniphier-pinctrl.dtsi" |