| 1 |
// SPDX-License-Identifier: GPL-2.0 |
| 2 |
#include <dt-bindings/interrupt-controller/irq.h> |
| 3 |
#include <dt-bindings/input/input.h> |
| 4 |
#include <dt-bindings/gpio/gpio.h> |
| 5 |
#include <dt-bindings/interrupt-controller/arm-gic.h> |
| 6 |
|
| 7 |
/ { |
| 8 |
compatible = "socionext,sc2000a"; |
| 9 |
interrupt-parent = <&gic>; |
| 10 |
#address-cells = <1>; |
| 11 |
#size-cells = <1>; |
| 12 |
|
| 13 |
cpus { |
| 14 |
#address-cells = <1>; |
| 15 |
#size-cells = <0>; |
| 16 |
enable-method = "socionext,milbeaut-m10v-smp"; |
| 17 |
cpu@f00 { |
| 18 |
device_type = "cpu"; |
| 19 |
compatible = "arm,cortex-a7"; |
| 20 |
reg = <0xf00>; |
| 21 |
}; |
| 22 |
cpu@f01 { |
| 23 |
device_type = "cpu"; |
| 24 |
compatible = "arm,cortex-a7"; |
| 25 |
reg = <0xf01>; |
| 26 |
}; |
| 27 |
cpu@f02 { |
| 28 |
device_type = "cpu"; |
| 29 |
compatible = "arm,cortex-a7"; |
| 30 |
reg = <0xf02>; |
| 31 |
}; |
| 32 |
cpu@f03 { |
| 33 |
device_type = "cpu"; |
| 34 |
compatible = "arm,cortex-a7"; |
| 35 |
reg = <0xf03>; |
| 36 |
}; |
| 37 |
}; |
| 38 |
|
| 39 |
timer { /* The Generic Timer */ |
| 40 |
compatible = "arm,armv7-timer"; |
| 41 |
interrupts = <GIC_PPI 13 |
| 42 |
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, |
| 43 |
<GIC_PPI 14 |
| 44 |
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, |
| 45 |
<GIC_PPI 11 |
| 46 |
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, |
| 47 |
<GIC_PPI 10 |
| 48 |
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; |
| 49 |
clock-frequency = <40000000>; |
| 50 |
always-on; |
| 51 |
}; |
| 52 |
|
| 53 |
soc { |
| 54 |
compatible = "simple-bus"; |
| 55 |
#address-cells = <1>; |
| 56 |
#size-cells = <1>; |
| 57 |
ranges; |
| 58 |
interrupt-parent = <&gic>; |
| 59 |
|
| 60 |
gic: interrupt-controller@1d000000 { |
| 61 |
compatible = "arm,cortex-a7-gic"; |
| 62 |
interrupt-controller; |
| 63 |
#interrupt-cells = <3>; |
| 64 |
reg = <0x1d001000 0x1000>, |
| 65 |
<0x1d002000 0x1000>; /* CPU I/f base and size */ |
| 66 |
}; |
| 67 |
|
| 68 |
clk: clock-ctrl@1d021000 { |
| 69 |
compatible = "socionext,milbeaut-m10v-ccu"; |
| 70 |
#clock-cells = <1>; |
| 71 |
reg = <0x1d021000 0x1000>; |
| 72 |
clocks = <&uclk40xi>; |
| 73 |
}; |
| 74 |
|
| 75 |
timer@1e000050 { /* 32-bit Reload Timers */ |
| 76 |
compatible = "socionext,milbeaut-timer"; |
| 77 |
reg = <0x1e000050 0x20>; |
| 78 |
interrupts = <0 91 4>; |
| 79 |
clocks = <&clk 4>; |
| 80 |
}; |
| 81 |
|
| 82 |
uart1: serial@1e700010 { /* PE4, PE5 */ |
| 83 |
/* Enable this as ttyUSI0 */ |
| 84 |
compatible = "socionext,milbeaut-usio-uart"; |
| 85 |
reg = <0x1e700010 0x10>; |
| 86 |
interrupts = <0 141 0x4>, <0 149 0x4>; |
| 87 |
interrupt-names = "rx", "tx"; |
| 88 |
clocks = <&clk 2>; |
| 89 |
}; |
| 90 |
|
| 91 |
}; |
| 92 |
|
| 93 |
sram@0 { |
| 94 |
compatible = "mmio-sram"; |
| 95 |
reg = <0x0 0x10000>; |
| 96 |
#address-cells = <1>; |
| 97 |
#size-cells = <1>; |
| 98 |
ranges = <0 0x0 0x10000>; |
| 99 |
smp-sram@f100 { |
| 100 |
compatible = "socionext,milbeaut-smp-sram"; |
| 101 |
reg = <0xf100 0x20>; |
| 102 |
}; |
| 103 |
}; |
| 104 |
}; |