| 1 |
// SPDX-License-Identifier: GPL-2.0+ OR MIT |
| 2 |
// |
| 3 |
// Device Tree Source for UniPhier Pro4 SoC |
| 4 |
// |
| 5 |
// Copyright (C) 2015-2016 Socionext Inc. |
| 6 |
// Author: Masahiro Yamada <[email protected]> |
| 7 |
|
| 8 |
#include <dt-bindings/gpio/uniphier-gpio.h> |
| 9 |
#include <dt-bindings/interrupt-controller/arm-gic.h> |
| 10 |
|
| 11 |
/ { |
| 12 |
compatible = "socionext,uniphier-pro4"; |
| 13 |
#address-cells = <1>; |
| 14 |
#size-cells = <1>; |
| 15 |
|
| 16 |
cpus { |
| 17 |
#address-cells = <1>; |
| 18 |
#size-cells = <0>; |
| 19 |
|
| 20 |
cpu@0 { |
| 21 |
device_type = "cpu"; |
| 22 |
compatible = "arm,cortex-a9"; |
| 23 |
reg = <0>; |
| 24 |
enable-method = "psci"; |
| 25 |
next-level-cache = <&l2>; |
| 26 |
}; |
| 27 |
|
| 28 |
cpu@1 { |
| 29 |
device_type = "cpu"; |
| 30 |
compatible = "arm,cortex-a9"; |
| 31 |
reg = <1>; |
| 32 |
enable-method = "psci"; |
| 33 |
next-level-cache = <&l2>; |
| 34 |
}; |
| 35 |
}; |
| 36 |
|
| 37 |
psci { |
| 38 |
compatible = "arm,psci-0.2"; |
| 39 |
method = "smc"; |
| 40 |
}; |
| 41 |
|
| 42 |
clocks { |
| 43 |
refclk: ref { |
| 44 |
compatible = "fixed-clock"; |
| 45 |
#clock-cells = <0>; |
| 46 |
clock-frequency = <25000000>; |
| 47 |
}; |
| 48 |
|
| 49 |
arm_timer_clk: arm-timer { |
| 50 |
#clock-cells = <0>; |
| 51 |
compatible = "fixed-clock"; |
| 52 |
clock-frequency = <50000000>; |
| 53 |
}; |
| 54 |
}; |
| 55 |
|
| 56 |
soc { |
| 57 |
compatible = "simple-bus"; |
| 58 |
#address-cells = <1>; |
| 59 |
#size-cells = <1>; |
| 60 |
ranges; |
| 61 |
interrupt-parent = <&intc>; |
| 62 |
|
| 63 |
l2: cache-controller@500c0000 { |
| 64 |
compatible = "socionext,uniphier-system-cache"; |
| 65 |
reg = <0x500c0000 0x2000>, <0x503c0100 0x4>, |
| 66 |
<0x506c0000 0x400>; |
| 67 |
interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>, |
| 68 |
<GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>; |
| 69 |
cache-unified; |
| 70 |
cache-size = <(768 * 1024)>; |
| 71 |
cache-sets = <256>; |
| 72 |
cache-line-size = <128>; |
| 73 |
cache-level = <2>; |
| 74 |
}; |
| 75 |
|
| 76 |
spi0: spi@54006000 { |
| 77 |
compatible = "socionext,uniphier-scssi"; |
| 78 |
status = "disabled"; |
| 79 |
reg = <0x54006000 0x100>; |
| 80 |
#address-cells = <1>; |
| 81 |
#size-cells = <0>; |
| 82 |
interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; |
| 83 |
pinctrl-names = "default"; |
| 84 |
pinctrl-0 = <&pinctrl_spi0>; |
| 85 |
clocks = <&peri_clk 11>; |
| 86 |
resets = <&peri_rst 11>; |
| 87 |
}; |
| 88 |
|
| 89 |
serial0: serial@54006800 { |
| 90 |
compatible = "socionext,uniphier-uart"; |
| 91 |
status = "disabled"; |
| 92 |
reg = <0x54006800 0x40>; |
| 93 |
interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; |
| 94 |
pinctrl-names = "default"; |
| 95 |
pinctrl-0 = <&pinctrl_uart0>; |
| 96 |
clocks = <&peri_clk 0>; |
| 97 |
resets = <&peri_rst 0>; |
| 98 |
}; |
| 99 |
|
| 100 |
serial1: serial@54006900 { |
| 101 |
compatible = "socionext,uniphier-uart"; |
| 102 |
status = "disabled"; |
| 103 |
reg = <0x54006900 0x40>; |
| 104 |
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; |
| 105 |
pinctrl-names = "default"; |
| 106 |
pinctrl-0 = <&pinctrl_uart1>; |
| 107 |
clocks = <&peri_clk 1>; |
| 108 |
resets = <&peri_rst 1>; |
| 109 |
}; |
| 110 |
|
| 111 |
serial2: serial@54006a00 { |
| 112 |
compatible = "socionext,uniphier-uart"; |
| 113 |
status = "disabled"; |
| 114 |
reg = <0x54006a00 0x40>; |
| 115 |
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; |
| 116 |
pinctrl-names = "default"; |
| 117 |
pinctrl-0 = <&pinctrl_uart2>; |
| 118 |
clocks = <&peri_clk 2>; |
| 119 |
resets = <&peri_rst 2>; |
| 120 |
}; |
| 121 |
|
| 122 |
serial3: serial@54006b00 { |
| 123 |
compatible = "socionext,uniphier-uart"; |
| 124 |
status = "disabled"; |
| 125 |
reg = <0x54006b00 0x40>; |
| 126 |
interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; |
| 127 |
pinctrl-names = "default"; |
| 128 |
pinctrl-0 = <&pinctrl_uart3>; |
| 129 |
clocks = <&peri_clk 3>; |
| 130 |
resets = <&peri_rst 3>; |
| 131 |
}; |
| 132 |
|
| 133 |
gpio: gpio@55000000 { |
| 134 |
compatible = "socionext,uniphier-gpio"; |
| 135 |
reg = <0x55000000 0x200>; |
| 136 |
interrupt-parent = <&aidet>; |
| 137 |
interrupt-controller; |
| 138 |
#interrupt-cells = <2>; |
| 139 |
gpio-controller; |
| 140 |
#gpio-cells = <2>; |
| 141 |
gpio-ranges = <&pinctrl 0 0 0>; |
| 142 |
gpio-ranges-group-names = "gpio_range"; |
| 143 |
ngpios = <248>; |
| 144 |
socionext,interrupt-ranges = <0 48 16>, <16 154 5>; |
| 145 |
}; |
| 146 |
|
| 147 |
i2c0: i2c@58780000 { |
| 148 |
compatible = "socionext,uniphier-fi2c"; |
| 149 |
status = "disabled"; |
| 150 |
reg = <0x58780000 0x80>; |
| 151 |
#address-cells = <1>; |
| 152 |
#size-cells = <0>; |
| 153 |
interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; |
| 154 |
pinctrl-names = "default"; |
| 155 |
pinctrl-0 = <&pinctrl_i2c0>; |
| 156 |
clocks = <&peri_clk 4>; |
| 157 |
resets = <&peri_rst 4>; |
| 158 |
clock-frequency = <100000>; |
| 159 |
}; |
| 160 |
|
| 161 |
i2c1: i2c@58781000 { |
| 162 |
compatible = "socionext,uniphier-fi2c"; |
| 163 |
status = "disabled"; |
| 164 |
reg = <0x58781000 0x80>; |
| 165 |
#address-cells = <1>; |
| 166 |
#size-cells = <0>; |
| 167 |
interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; |
| 168 |
pinctrl-names = "default"; |
| 169 |
pinctrl-0 = <&pinctrl_i2c1>; |
| 170 |
clocks = <&peri_clk 5>; |
| 171 |
resets = <&peri_rst 5>; |
| 172 |
clock-frequency = <100000>; |
| 173 |
}; |
| 174 |
|
| 175 |
i2c2: i2c@58782000 { |
| 176 |
compatible = "socionext,uniphier-fi2c"; |
| 177 |
status = "disabled"; |
| 178 |
reg = <0x58782000 0x80>; |
| 179 |
#address-cells = <1>; |
| 180 |
#size-cells = <0>; |
| 181 |
interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; |
| 182 |
pinctrl-names = "default"; |
| 183 |
pinctrl-0 = <&pinctrl_i2c2>; |
| 184 |
clocks = <&peri_clk 6>; |
| 185 |
resets = <&peri_rst 6>; |
| 186 |
clock-frequency = <100000>; |
| 187 |
}; |
| 188 |
|
| 189 |
i2c3: i2c@58783000 { |
| 190 |
compatible = "socionext,uniphier-fi2c"; |
| 191 |
status = "disabled"; |
| 192 |
reg = <0x58783000 0x80>; |
| 193 |
#address-cells = <1>; |
| 194 |
#size-cells = <0>; |
| 195 |
interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; |
| 196 |
pinctrl-names = "default"; |
| 197 |
pinctrl-0 = <&pinctrl_i2c3>; |
| 198 |
clocks = <&peri_clk 7>; |
| 199 |
resets = <&peri_rst 7>; |
| 200 |
clock-frequency = <100000>; |
| 201 |
}; |
| 202 |
|
| 203 |
/* i2c4 does not exist */ |
| 204 |
|
| 205 |
/* chip-internal connection for DMD */ |
| 206 |
i2c5: i2c@58785000 { |
| 207 |
compatible = "socionext,uniphier-fi2c"; |
| 208 |
reg = <0x58785000 0x80>; |
| 209 |
#address-cells = <1>; |
| 210 |
#size-cells = <0>; |
| 211 |
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; |
| 212 |
clocks = <&peri_clk 9>; |
| 213 |
resets = <&peri_rst 9>; |
| 214 |
clock-frequency = <400000>; |
| 215 |
}; |
| 216 |
|
| 217 |
/* chip-internal connection for HDMI */ |
| 218 |
i2c6: i2c@58786000 { |
| 219 |
compatible = "socionext,uniphier-fi2c"; |
| 220 |
reg = <0x58786000 0x80>; |
| 221 |
#address-cells = <1>; |
| 222 |
#size-cells = <0>; |
| 223 |
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; |
| 224 |
clocks = <&peri_clk 10>; |
| 225 |
resets = <&peri_rst 10>; |
| 226 |
clock-frequency = <400000>; |
| 227 |
}; |
| 228 |
|
| 229 |
system_bus: system-bus@58c00000 { |
| 230 |
compatible = "socionext,uniphier-system-bus"; |
| 231 |
status = "disabled"; |
| 232 |
reg = <0x58c00000 0x400>; |
| 233 |
#address-cells = <2>; |
| 234 |
#size-cells = <1>; |
| 235 |
pinctrl-names = "default"; |
| 236 |
pinctrl-0 = <&pinctrl_system_bus>; |
| 237 |
}; |
| 238 |
|
| 239 |
smpctrl@59801000 { |
| 240 |
compatible = "socionext,uniphier-smpctrl"; |
| 241 |
reg = <0x59801000 0x400>; |
| 242 |
}; |
| 243 |
|
| 244 |
mioctrl: syscon@59810000 { |
| 245 |
compatible = "socionext,uniphier-pro4-mioctrl", |
| 246 |
"simple-mfd", "syscon"; |
| 247 |
reg = <0x59810000 0x800>; |
| 248 |
|
| 249 |
mio_clk: clock-controller { |
| 250 |
compatible = "socionext,uniphier-pro4-mio-clock"; |
| 251 |
#clock-cells = <1>; |
| 252 |
}; |
| 253 |
|
| 254 |
mio_rst: reset-controller { |
| 255 |
compatible = "socionext,uniphier-pro4-mio-reset"; |
| 256 |
#reset-cells = <1>; |
| 257 |
}; |
| 258 |
}; |
| 259 |
|
| 260 |
syscon@59820000 { |
| 261 |
compatible = "socionext,uniphier-pro4-perictrl", |
| 262 |
"simple-mfd", "syscon"; |
| 263 |
reg = <0x59820000 0x200>; |
| 264 |
|
| 265 |
peri_clk: clock-controller { |
| 266 |
compatible = "socionext,uniphier-pro4-peri-clock"; |
| 267 |
#clock-cells = <1>; |
| 268 |
}; |
| 269 |
|
| 270 |
peri_rst: reset-controller { |
| 271 |
compatible = "socionext,uniphier-pro4-peri-reset"; |
| 272 |
#reset-cells = <1>; |
| 273 |
}; |
| 274 |
}; |
| 275 |
|
| 276 |
dmac: dma-controller@5a000000 { |
| 277 |
compatible = "socionext,uniphier-mio-dmac"; |
| 278 |
reg = <0x5a000000 0x1000>; |
| 279 |
interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, |
| 280 |
<GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, |
| 281 |
<GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>, |
| 282 |
<GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, |
| 283 |
<GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>, |
| 284 |
<GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, |
| 285 |
<GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>, |
| 286 |
<GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; |
| 287 |
clocks = <&mio_clk 7>; |
| 288 |
resets = <&mio_rst 7>; |
| 289 |
#dma-cells = <1>; |
| 290 |
}; |
| 291 |
|
| 292 |
sd: mmc@5a400000 { |
| 293 |
compatible = "socionext,uniphier-sd-v2.91"; |
| 294 |
status = "disabled"; |
| 295 |
reg = <0x5a400000 0x200>; |
| 296 |
interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; |
| 297 |
pinctrl-names = "default", "uhs"; |
| 298 |
pinctrl-0 = <&pinctrl_sd>; |
| 299 |
pinctrl-1 = <&pinctrl_sd_uhs>; |
| 300 |
clocks = <&mio_clk 0>; |
| 301 |
reset-names = "host", "bridge"; |
| 302 |
resets = <&mio_rst 0>, <&mio_rst 3>; |
| 303 |
dma-names = "rx-tx"; |
| 304 |
dmas = <&dmac 4>; |
| 305 |
bus-width = <4>; |
| 306 |
cap-sd-highspeed; |
| 307 |
sd-uhs-sdr12; |
| 308 |
sd-uhs-sdr25; |
| 309 |
sd-uhs-sdr50; |
| 310 |
socionext,syscon-uhs-mode = <&mioctrl 0>; |
| 311 |
}; |
| 312 |
|
| 313 |
emmc: mmc@5a500000 { |
| 314 |
compatible = "socionext,uniphier-sd-v2.91"; |
| 315 |
status = "disabled"; |
| 316 |
reg = <0x5a500000 0x200>; |
| 317 |
interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; |
| 318 |
pinctrl-names = "default"; |
| 319 |
pinctrl-0 = <&pinctrl_emmc>; |
| 320 |
clocks = <&mio_clk 1>; |
| 321 |
reset-names = "host", "bridge", "hw"; |
| 322 |
resets = <&mio_rst 1>, <&mio_rst 4>, <&mio_rst 6>; |
| 323 |
dma-names = "rx-tx"; |
| 324 |
dmas = <&dmac 5>; |
| 325 |
bus-width = <8>; |
| 326 |
cap-mmc-highspeed; |
| 327 |
cap-mmc-hw-reset; |
| 328 |
non-removable; |
| 329 |
}; |
| 330 |
|
| 331 |
sd1: mmc@5a600000 { |
| 332 |
compatible = "socionext,uniphier-sd-v2.91"; |
| 333 |
status = "disabled"; |
| 334 |
reg = <0x5a600000 0x200>; |
| 335 |
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; |
| 336 |
pinctrl-names = "default"; |
| 337 |
pinctrl-0 = <&pinctrl_sd1>; |
| 338 |
clocks = <&mio_clk 2>; |
| 339 |
reset-names = "host", "bridge"; |
| 340 |
resets = <&mio_rst 2>, <&mio_rst 5>; |
| 341 |
dma-names = "rx-tx"; |
| 342 |
dmas = <&dmac 6>; |
| 343 |
bus-width = <4>; |
| 344 |
cap-sd-highspeed; |
| 345 |
}; |
| 346 |
|
| 347 |
usb2: usb@5a800100 { |
| 348 |
compatible = "socionext,uniphier-ehci", "generic-ehci"; |
| 349 |
status = "disabled"; |
| 350 |
reg = <0x5a800100 0x100>; |
| 351 |
interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; |
| 352 |
pinctrl-names = "default"; |
| 353 |
pinctrl-0 = <&pinctrl_usb2>; |
| 354 |
clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 8>, |
| 355 |
<&mio_clk 12>; |
| 356 |
resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 8>, |
| 357 |
<&mio_rst 12>; |
| 358 |
phy-names = "usb"; |
| 359 |
phys = <&usb_phy0>; |
| 360 |
has-transaction-translator; |
| 361 |
}; |
| 362 |
|
| 363 |
usb3: usb@5a810100 { |
| 364 |
compatible = "socionext,uniphier-ehci", "generic-ehci"; |
| 365 |
status = "disabled"; |
| 366 |
reg = <0x5a810100 0x100>; |
| 367 |
interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; |
| 368 |
pinctrl-names = "default"; |
| 369 |
pinctrl-0 = <&pinctrl_usb3>; |
| 370 |
clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 9>, |
| 371 |
<&mio_clk 13>; |
| 372 |
resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 9>, |
| 373 |
<&mio_rst 13>; |
| 374 |
phy-names = "usb"; |
| 375 |
phys = <&usb_phy1>; |
| 376 |
has-transaction-translator; |
| 377 |
}; |
| 378 |
|
| 379 |
soc_glue: syscon@5f800000 { |
| 380 |
compatible = "socionext,uniphier-pro4-soc-glue", |
| 381 |
"simple-mfd", "syscon"; |
| 382 |
reg = <0x5f800000 0x2000>; |
| 383 |
|
| 384 |
pinctrl: pinctrl { |
| 385 |
compatible = "socionext,uniphier-pro4-pinctrl"; |
| 386 |
}; |
| 387 |
|
| 388 |
usb-hub { |
| 389 |
compatible = "socionext,uniphier-pro4-usb2-phy"; |
| 390 |
#address-cells = <1>; |
| 391 |
#size-cells = <0>; |
| 392 |
|
| 393 |
usb_phy0: phy@0 { |
| 394 |
reg = <0>; |
| 395 |
#phy-cells = <0>; |
| 396 |
}; |
| 397 |
|
| 398 |
usb_phy1: phy@1 { |
| 399 |
reg = <1>; |
| 400 |
#phy-cells = <0>; |
| 401 |
}; |
| 402 |
|
| 403 |
usb_phy2: phy@2 { |
| 404 |
reg = <2>; |
| 405 |
#phy-cells = <0>; |
| 406 |
vbus-supply = <&usb0_vbus>; |
| 407 |
}; |
| 408 |
|
| 409 |
usb_phy3: phy@3 { |
| 410 |
reg = <3>; |
| 411 |
#phy-cells = <0>; |
| 412 |
vbus-supply = <&usb1_vbus>; |
| 413 |
}; |
| 414 |
}; |
| 415 |
|
| 416 |
sg_clk: clock-controller { |
| 417 |
compatible = "socionext,uniphier-pro4-sg-clock"; |
| 418 |
#clock-cells = <1>; |
| 419 |
}; |
| 420 |
}; |
| 421 |
|
| 422 |
syscon@5f900000 { |
| 423 |
compatible = "socionext,uniphier-pro4-soc-glue-debug", |
| 424 |
"simple-mfd", "syscon"; |
| 425 |
reg = <0x5f900000 0x2000>; |
| 426 |
#address-cells = <1>; |
| 427 |
#size-cells = <1>; |
| 428 |
ranges = <0 0x5f900000 0x2000>; |
| 429 |
|
| 430 |
efuse@100 { |
| 431 |
compatible = "socionext,uniphier-efuse"; |
| 432 |
reg = <0x100 0x28>; |
| 433 |
}; |
| 434 |
|
| 435 |
efuse@130 { |
| 436 |
compatible = "socionext,uniphier-efuse"; |
| 437 |
reg = <0x130 0x8>; |
| 438 |
}; |
| 439 |
|
| 440 |
efuse@200 { |
| 441 |
compatible = "socionext,uniphier-efuse"; |
| 442 |
reg = <0x200 0x14>; |
| 443 |
}; |
| 444 |
}; |
| 445 |
|
| 446 |
xdmac: dma-controller@5fc10000 { |
| 447 |
compatible = "socionext,uniphier-xdmac"; |
| 448 |
reg = <0x5fc10000 0x5300>; |
| 449 |
interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; |
| 450 |
dma-channels = <16>; |
| 451 |
#dma-cells = <2>; |
| 452 |
}; |
| 453 |
|
| 454 |
aidet: interrupt-controller@5fc20000 { |
| 455 |
compatible = "socionext,uniphier-pro4-aidet"; |
| 456 |
reg = <0x5fc20000 0x200>; |
| 457 |
interrupt-controller; |
| 458 |
#interrupt-cells = <2>; |
| 459 |
}; |
| 460 |
|
| 461 |
timer@60000200 { |
| 462 |
compatible = "arm,cortex-a9-global-timer"; |
| 463 |
reg = <0x60000200 0x20>; |
| 464 |
interrupts = <GIC_PPI 11 |
| 465 |
(GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_HIGH)>; |
| 466 |
clocks = <&arm_timer_clk>; |
| 467 |
}; |
| 468 |
|
| 469 |
timer@60000600 { |
| 470 |
compatible = "arm,cortex-a9-twd-timer"; |
| 471 |
reg = <0x60000600 0x20>; |
| 472 |
interrupts = <GIC_PPI 13 |
| 473 |
(GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_HIGH)>; |
| 474 |
clocks = <&arm_timer_clk>; |
| 475 |
}; |
| 476 |
|
| 477 |
intc: interrupt-controller@60001000 { |
| 478 |
compatible = "arm,cortex-a9-gic"; |
| 479 |
reg = <0x60001000 0x1000>, |
| 480 |
<0x60000100 0x100>; |
| 481 |
#interrupt-cells = <3>; |
| 482 |
interrupt-controller; |
| 483 |
}; |
| 484 |
|
| 485 |
syscon@61840000 { |
| 486 |
compatible = "socionext,uniphier-pro4-sysctrl", |
| 487 |
"simple-mfd", "syscon"; |
| 488 |
reg = <0x61840000 0x10000>; |
| 489 |
|
| 490 |
sys_clk: clock-controller { |
| 491 |
compatible = "socionext,uniphier-pro4-clock"; |
| 492 |
#clock-cells = <1>; |
| 493 |
}; |
| 494 |
|
| 495 |
sys_rst: reset-controller { |
| 496 |
compatible = "socionext,uniphier-pro4-reset"; |
| 497 |
#reset-cells = <1>; |
| 498 |
}; |
| 499 |
}; |
| 500 |
|
| 501 |
eth: ethernet@65000000 { |
| 502 |
compatible = "socionext,uniphier-pro4-ave4"; |
| 503 |
status = "disabled"; |
| 504 |
reg = <0x65000000 0x8500>; |
| 505 |
interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; |
| 506 |
pinctrl-names = "default"; |
| 507 |
pinctrl-0 = <&pinctrl_ether_rgmii>; |
| 508 |
clock-names = "gio", "ether", "ether-gb", "ether-phy"; |
| 509 |
clocks = <&sys_clk 12>, <&sys_clk 6>, <&sys_clk 7>, |
| 510 |
<&sys_clk 10>; |
| 511 |
reset-names = "gio", "ether"; |
| 512 |
resets = <&sys_rst 12>, <&sys_rst 6>; |
| 513 |
phy-mode = "rgmii"; |
| 514 |
local-mac-address = [00 00 00 00 00 00]; |
| 515 |
socionext,syscon-phy-mode = <&soc_glue 0>; |
| 516 |
|
| 517 |
mdio: mdio { |
| 518 |
#address-cells = <1>; |
| 519 |
#size-cells = <0>; |
| 520 |
}; |
| 521 |
}; |
| 522 |
|
| 523 |
ahci0: sata@65600000 { |
| 524 |
compatible = "socionext,uniphier-pro4-ahci", |
| 525 |
"generic-ahci"; |
| 526 |
status = "disabled"; |
| 527 |
reg = <0x65600000 0x10000>; |
| 528 |
interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>; |
| 529 |
clocks = <&sys_clk 12>, <&sys_clk 28>; |
| 530 |
resets = <&sys_rst 12>, <&sys_rst 28>, <&ahci0_rst 3>; |
| 531 |
ports-implemented = <1>; |
| 532 |
phys = <&ahci0_phy>; |
| 533 |
assigned-clocks = <&sg_clk 0>; |
| 534 |
assigned-clock-rates = <25000000>; |
| 535 |
}; |
| 536 |
|
| 537 |
sata-controller@65700000 { |
| 538 |
compatible = "socionext,uniphier-pxs2-ahci-glue", |
| 539 |
"simple-mfd"; |
| 540 |
reg = <0x65700000 0x100>; |
| 541 |
#address-cells = <1>; |
| 542 |
#size-cells = <1>; |
| 543 |
ranges = <0 0x65700000 0x100>; |
| 544 |
|
| 545 |
ahci0_rst: reset-controller@0 { |
| 546 |
compatible = "socionext,uniphier-pro4-ahci-reset"; |
| 547 |
reg = <0x0 0x4>; |
| 548 |
clock-names = "gio", "link"; |
| 549 |
clocks = <&sys_clk 12>, <&sys_clk 28>; |
| 550 |
reset-names = "gio", "link"; |
| 551 |
resets = <&sys_rst 12>, <&sys_rst 28>; |
| 552 |
#reset-cells = <1>; |
| 553 |
}; |
| 554 |
|
| 555 |
ahci0_phy: phy@10 { |
| 556 |
compatible = "socionext,uniphier-pro4-ahci-phy"; |
| 557 |
reg = <0x10 0x40>; |
| 558 |
clock-names = "link", "gio"; |
| 559 |
clocks = <&sys_clk 28>, <&sys_clk 12>; |
| 560 |
reset-names = "link", "gio", "phy", |
| 561 |
"pm", "tx", "rx"; |
| 562 |
resets = <&sys_rst 28>, <&sys_rst 12>, |
| 563 |
<&sys_rst 30>, |
| 564 |
<&ahci0_rst 0>, <&ahci0_rst 1>, |
| 565 |
<&ahci0_rst 2>; |
| 566 |
#phy-cells = <0>; |
| 567 |
}; |
| 568 |
}; |
| 569 |
|
| 570 |
ahci1: sata@65800000 { |
| 571 |
compatible = "socionext,uniphier-pro4-ahci", |
| 572 |
"generic-ahci"; |
| 573 |
status = "disabled"; |
| 574 |
reg = <0x65800000 0x10000>; |
| 575 |
interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; |
| 576 |
clocks = <&sys_clk 12>, <&sys_clk 29>; |
| 577 |
resets = <&sys_rst 12>, <&sys_rst 29>, <&ahci1_rst 3>; |
| 578 |
ports-implemented = <1>; |
| 579 |
phys = <&ahci1_phy>; |
| 580 |
assigned-clocks = <&sg_clk 0>; |
| 581 |
assigned-clock-rates = <25000000>; |
| 582 |
}; |
| 583 |
|
| 584 |
sata-controller@65900000 { |
| 585 |
compatible = "socionext,uniphier-pro4-ahci-glue", |
| 586 |
"simple-mfd"; |
| 587 |
reg = <0x65900000 0x100>; |
| 588 |
#address-cells = <1>; |
| 589 |
#size-cells = <1>; |
| 590 |
ranges = <0 0x65900000 0x100>; |
| 591 |
|
| 592 |
ahci1_rst: reset-controller@0 { |
| 593 |
compatible = "socionext,uniphier-pro4-ahci-reset"; |
| 594 |
reg = <0x0 0x4>; |
| 595 |
clock-names = "gio", "link"; |
| 596 |
clocks = <&sys_clk 12>, <&sys_clk 29>; |
| 597 |
reset-names = "gio", "link"; |
| 598 |
resets = <&sys_rst 12>, <&sys_rst 29>; |
| 599 |
#reset-cells = <1>; |
| 600 |
}; |
| 601 |
|
| 602 |
ahci1_phy: phy@10 { |
| 603 |
compatible = "socionext,uniphier-pro4-ahci-phy"; |
| 604 |
reg = <0x10 0x40>; |
| 605 |
clock-names = "link", "gio"; |
| 606 |
clocks = <&sys_clk 29>, <&sys_clk 12>; |
| 607 |
reset-names = "link", "gio", "phy", |
| 608 |
"pm", "tx", "rx"; |
| 609 |
resets = <&sys_rst 29>, <&sys_rst 12>, |
| 610 |
<&sys_rst 30>, |
| 611 |
<&ahci1_rst 0>, <&ahci1_rst 1>, |
| 612 |
<&ahci1_rst 2>; |
| 613 |
#phy-cells = <0>; |
| 614 |
}; |
| 615 |
}; |
| 616 |
|
| 617 |
usb0: usb@65a00000 { |
| 618 |
compatible = "socionext,uniphier-dwc3", "snps,dwc3"; |
| 619 |
status = "disabled"; |
| 620 |
reg = <0x65a00000 0xcd00>; |
| 621 |
interrupt-names = "host", "peripheral"; |
| 622 |
interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>, |
| 623 |
<GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>; |
| 624 |
pinctrl-names = "default"; |
| 625 |
pinctrl-0 = <&pinctrl_usb0>; |
| 626 |
clock-names = "ref", "bus_early", "suspend"; |
| 627 |
clocks = <&sys_clk 12>, <&sys_clk 12>, <&sys_clk 12>; |
| 628 |
resets = <&usb0_rst 4>; |
| 629 |
phys = <&usb_phy2>, <&usb0_ssphy>; |
| 630 |
dr_mode = "host"; |
| 631 |
}; |
| 632 |
|
| 633 |
usb-controller@65b00000 { |
| 634 |
compatible = "socionext,uniphier-pro4-dwc3-glue", |
| 635 |
"simple-mfd"; |
| 636 |
reg = <0x65b00000 0x100>; |
| 637 |
#address-cells = <1>; |
| 638 |
#size-cells = <1>; |
| 639 |
ranges = <0 0x65b00000 0x100>; |
| 640 |
|
| 641 |
usb0_vbus: regulator@0 { |
| 642 |
compatible = "socionext,uniphier-pro4-usb3-regulator"; |
| 643 |
reg = <0 0x10>; |
| 644 |
clock-names = "gio", "link"; |
| 645 |
clocks = <&sys_clk 12>, <&sys_clk 14>; |
| 646 |
reset-names = "gio", "link"; |
| 647 |
resets = <&sys_rst 12>, <&sys_rst 14>; |
| 648 |
}; |
| 649 |
|
| 650 |
usb0_ssphy: phy@10 { |
| 651 |
compatible = "socionext,uniphier-pro4-usb3-ssphy"; |
| 652 |
reg = <0x10 0x10>; |
| 653 |
#phy-cells = <0>; |
| 654 |
clock-names = "gio", "link"; |
| 655 |
clocks = <&sys_clk 12>, <&sys_clk 14>; |
| 656 |
reset-names = "gio", "link"; |
| 657 |
resets = <&sys_rst 12>, <&sys_rst 14>; |
| 658 |
vbus-supply = <&usb0_vbus>; |
| 659 |
}; |
| 660 |
|
| 661 |
usb0_rst: reset-controller@40 { |
| 662 |
compatible = "socionext,uniphier-pro4-usb3-reset"; |
| 663 |
reg = <0x40 0x4>; |
| 664 |
#reset-cells = <1>; |
| 665 |
clock-names = "gio", "link"; |
| 666 |
clocks = <&sys_clk 12>, <&sys_clk 14>; |
| 667 |
reset-names = "gio", "link"; |
| 668 |
resets = <&sys_rst 12>, <&sys_rst 14>; |
| 669 |
}; |
| 670 |
}; |
| 671 |
|
| 672 |
usb1: usb@65c00000 { |
| 673 |
compatible = "socionext,uniphier-dwc3", "snps,dwc3"; |
| 674 |
status = "disabled"; |
| 675 |
reg = <0x65c00000 0xcd00>; |
| 676 |
interrupt-names = "host", "peripheral"; |
| 677 |
interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, |
| 678 |
<GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; |
| 679 |
pinctrl-names = "default"; |
| 680 |
pinctrl-0 = <&pinctrl_usb1>; |
| 681 |
clock-names = "ref", "bus_early", "suspend"; |
| 682 |
clocks = <&sys_clk 12>, <&sys_clk 12>, <&sys_clk 12>; |
| 683 |
resets = <&usb1_rst 4>; |
| 684 |
phys = <&usb_phy3>; |
| 685 |
dr_mode = "host"; |
| 686 |
}; |
| 687 |
|
| 688 |
usb-controller@65d00000 { |
| 689 |
compatible = "socionext,uniphier-pro4-dwc3-glue", |
| 690 |
"simple-mfd"; |
| 691 |
reg = <0x65d00000 0x100>; |
| 692 |
#address-cells = <1>; |
| 693 |
#size-cells = <1>; |
| 694 |
ranges = <0 0x65d00000 0x100>; |
| 695 |
|
| 696 |
usb1_vbus: regulator@0 { |
| 697 |
compatible = "socionext,uniphier-pro4-usb3-regulator"; |
| 698 |
reg = <0 0x10>; |
| 699 |
clock-names = "gio", "link"; |
| 700 |
clocks = <&sys_clk 12>, <&sys_clk 15>; |
| 701 |
reset-names = "gio", "link"; |
| 702 |
resets = <&sys_rst 12>, <&sys_rst 15>; |
| 703 |
}; |
| 704 |
|
| 705 |
usb1_rst: reset-controller@40 { |
| 706 |
compatible = "socionext,uniphier-pro4-usb3-reset"; |
| 707 |
reg = <0x40 0x4>; |
| 708 |
#reset-cells = <1>; |
| 709 |
clock-names = "gio", "link"; |
| 710 |
clocks = <&sys_clk 12>, <&sys_clk 15>; |
| 711 |
reset-names = "gio", "link"; |
| 712 |
resets = <&sys_rst 12>, <&sys_rst 15>; |
| 713 |
}; |
| 714 |
}; |
| 715 |
|
| 716 |
nand: nand-controller@68000000 { |
| 717 |
compatible = "socionext,uniphier-denali-nand-v5a"; |
| 718 |
status = "disabled"; |
| 719 |
reg-names = "nand_data", "denali_reg"; |
| 720 |
reg = <0x68000000 0x20>, <0x68100000 0x1000>; |
| 721 |
#address-cells = <1>; |
| 722 |
#size-cells = <0>; |
| 723 |
interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; |
| 724 |
pinctrl-names = "default"; |
| 725 |
pinctrl-0 = <&pinctrl_nand>; |
| 726 |
clock-names = "nand", "nand_x", "ecc"; |
| 727 |
clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>; |
| 728 |
reset-names = "nand", "reg"; |
| 729 |
resets = <&sys_rst 2>, <&sys_rst 2>; |
| 730 |
}; |
| 731 |
}; |
| 732 |
}; |
| 733 |
|
| 734 |
#include "uniphier-pinctrl.dtsi" |