| 1 |
// SPDX-License-Identifier: GPL-2.0-or-later |
| 2 |
|
| 3 |
#include "ep7211.dtsi" |
| 4 |
#include <dt-bindings/gpio/gpio.h> |
| 5 |
|
| 6 |
/ { |
| 7 |
model = "Cirrus Logic EP7211 Development Board"; |
| 8 |
compatible = "cirrus,edb7211", "cirrus,ep7211", "cirrus,ep7209"; |
| 9 |
|
| 10 |
memory@c0000000 { |
| 11 |
device_type = "memory"; |
| 12 |
reg = <0xc0000000 0x02000000>; |
| 13 |
}; |
| 14 |
|
| 15 |
backlight: backlight { |
| 16 |
compatible = "pwm-backlight"; |
| 17 |
pwms = <&pwm 0>; |
| 18 |
brightness-levels = < |
| 19 |
0x0 0x1 0x2 0x3 0x4 0x5 0x6 0x7 |
| 20 |
0x8 0x9 0xa 0xb 0xc 0xd 0xe 0xf |
| 21 |
>; |
| 22 |
default-brightness-level = <0x0>; |
| 23 |
power-supply = <&blen>; |
| 24 |
}; |
| 25 |
|
| 26 |
display: display { |
| 27 |
model = "320x240x4"; |
| 28 |
bits-per-pixel = <4>; |
| 29 |
ac-prescale = <17>; |
| 30 |
|
| 31 |
display-timings { |
| 32 |
native-mode = <&timing0>; |
| 33 |
timing0: timing-320x240 { |
| 34 |
hactive = <320>; |
| 35 |
hback-porch = <0>; |
| 36 |
hfront-porch = <0>; |
| 37 |
hsync-len = <0>; |
| 38 |
vactive = <240>; |
| 39 |
vback-porch = <0>; |
| 40 |
vfront-porch = <0>; |
| 41 |
vsync-len = <0>; |
| 42 |
clock-frequency = <6500000>; |
| 43 |
}; |
| 44 |
}; |
| 45 |
}; |
| 46 |
|
| 47 |
i2c: i2c { |
| 48 |
compatible = "i2c-gpio"; |
| 49 |
sda-gpios = <&portd 4 GPIO_ACTIVE_HIGH>; |
| 50 |
scl-gpios = <&portd 5 GPIO_ACTIVE_HIGH>; |
| 51 |
i2c-gpio,delay-us = <2>; |
| 52 |
i2c-gpio,scl-output-only; |
| 53 |
#address-cells = <1>; |
| 54 |
#size-cells = <0>; |
| 55 |
}; |
| 56 |
|
| 57 |
lcddc: lcddc { |
| 58 |
compatible = "regulator-fixed"; |
| 59 |
regulator-name = "BACKLIGHT ENABLE"; |
| 60 |
regulator-min-microvolt = <3300000>; |
| 61 |
regulator-max-microvolt = <3300000>; |
| 62 |
gpio = <&portd 1 GPIO_ACTIVE_HIGH>; |
| 63 |
}; |
| 64 |
|
| 65 |
blen: blen { |
| 66 |
compatible = "regulator-fixed"; |
| 67 |
regulator-name = "BACKLIGHT ENABLE"; |
| 68 |
regulator-min-microvolt = <3300000>; |
| 69 |
regulator-max-microvolt = <3300000>; |
| 70 |
gpio = <&portd 3 GPIO_ACTIVE_HIGH>; |
| 71 |
}; |
| 72 |
}; |
| 73 |
|
| 74 |
&bus { |
| 75 |
flash: nor@0 { |
| 76 |
compatible = "cfi-flash"; |
| 77 |
reg = <0 0x00000000 0x02000000>; |
| 78 |
bank-width = <2>; |
| 79 |
#address-cells = <1>; |
| 80 |
#size-cells = <1>; |
| 81 |
}; |
| 82 |
}; |
| 83 |
|
| 84 |
&fb { |
| 85 |
display = <&display>; |
| 86 |
lcd-supply = <&lcddc>; |
| 87 |
status = "okay"; |
| 88 |
}; |
| 89 |
|
| 90 |
&portd { |
| 91 |
lcden-hog { |
| 92 |
gpio-hog; |
| 93 |
gpios = <2 GPIO_ACTIVE_HIGH>; |
| 94 |
output-high; |
| 95 |
line-name = "LCD ENABLE"; |
| 96 |
}; |
| 97 |
}; |