| 1 |
// SPDX-License-Identifier: GPL-2.0-or-later |
| 2 |
|
| 3 |
/dts-v1/; |
| 4 |
|
| 5 |
#include <dt-bindings/clock/clps711x-clock.h> |
| 6 |
|
| 7 |
/ { |
| 8 |
#address-cells = <1>; |
| 9 |
#size-cells = <1>; |
| 10 |
model = "Cirrus Logic EP7209"; |
| 11 |
compatible = "cirrus,ep7209"; |
| 12 |
|
| 13 |
chosen { }; |
| 14 |
|
| 15 |
aliases { |
| 16 |
gpio0 = &porta; |
| 17 |
gpio1 = &portb; |
| 18 |
gpio3 = &portd; |
| 19 |
gpio4 = &porte; |
| 20 |
serial0 = &uart1; |
| 21 |
serial1 = &uart2; |
| 22 |
spi0 = &spi; |
| 23 |
timer0 = &timer1; |
| 24 |
timer1 = &timer2; |
| 25 |
}; |
| 26 |
|
| 27 |
cpus { |
| 28 |
#address-cells = <0>; |
| 29 |
#size-cells = <0>; |
| 30 |
|
| 31 |
cpu { |
| 32 |
device_type = "cpu"; |
| 33 |
compatible = "arm,arm720t"; |
| 34 |
}; |
| 35 |
}; |
| 36 |
|
| 37 |
soc { |
| 38 |
#address-cells = <1>; |
| 39 |
#size-cells = <1>; |
| 40 |
compatible = "simple-bus"; |
| 41 |
interrupt-parent = <&intc>; |
| 42 |
ranges; |
| 43 |
|
| 44 |
clks: clks@80000000 { |
| 45 |
#clock-cells = <1>; |
| 46 |
compatible = "cirrus,ep7209-clk"; |
| 47 |
reg = <0x80000000 0xc000>; |
| 48 |
startup-frequency = <73728000>; |
| 49 |
}; |
| 50 |
|
| 51 |
intc: intc@80000000 { |
| 52 |
compatible = "cirrus,ep7209-intc"; |
| 53 |
reg = <0x80000000 0x4000>; |
| 54 |
interrupt-controller; |
| 55 |
#interrupt-cells = <1>; |
| 56 |
}; |
| 57 |
|
| 58 |
porta: gpio@80000000 { |
| 59 |
compatible = "cirrus,ep7209-gpio"; |
| 60 |
reg = <0x80000000 0x1 0x80000040 0x1>; |
| 61 |
gpio-controller; |
| 62 |
#gpio-cells = <2>; |
| 63 |
}; |
| 64 |
|
| 65 |
portb: gpio@80000001 { |
| 66 |
compatible = "cirrus,ep7209-gpio"; |
| 67 |
reg = <0x80000001 0x1 0x80000041 0x1>; |
| 68 |
gpio-controller; |
| 69 |
#gpio-cells = <2>; |
| 70 |
}; |
| 71 |
|
| 72 |
portd: gpio@80000003 { |
| 73 |
compatible = "cirrus,ep7209-gpio"; |
| 74 |
reg = <0x80000003 0x1 0x80000043 0x1>; |
| 75 |
gpio-controller; |
| 76 |
#gpio-cells = <2>; |
| 77 |
}; |
| 78 |
|
| 79 |
porte: gpio@80000083 { |
| 80 |
compatible = "cirrus,ep7209-gpio"; |
| 81 |
reg = <0x80000083 0x1 0x800000c3 0x1>; |
| 82 |
gpio-controller; |
| 83 |
#gpio-cells = <2>; |
| 84 |
}; |
| 85 |
|
| 86 |
syscon1: syscon@80000100 { |
| 87 |
compatible = "cirrus,ep7209-syscon1", "syscon"; |
| 88 |
reg = <0x80000100 0x80>; |
| 89 |
}; |
| 90 |
|
| 91 |
bus: bus@80000180 { |
| 92 |
#address-cells = <2>; |
| 93 |
#size-cells = <1>; |
| 94 |
compatible = "cirrus,ep7209-bus", "simple-bus"; |
| 95 |
clocks = <&clks CLPS711X_CLK_BUS>; |
| 96 |
reg = <0x80000180 0x80>; |
| 97 |
ranges = < |
| 98 |
0 0 0x00000000 0x10000000 |
| 99 |
1 0 0x10000000 0x10000000 |
| 100 |
2 0 0x20000000 0x10000000 |
| 101 |
3 0 0x30000000 0x10000000 |
| 102 |
4 0 0x40000000 0x10000000 |
| 103 |
5 0 0x50000000 0x10000000 |
| 104 |
6 0 0x60000000 0x0000c000 |
| 105 |
7 0 0x70000000 0x00000080 |
| 106 |
>; |
| 107 |
}; |
| 108 |
|
| 109 |
fb: fb@800002c0 { |
| 110 |
compatible = "cirrus,ep7209-fb"; |
| 111 |
reg = <0x800002c0 0xd44>, <0x60000000 0xc000>; |
| 112 |
clocks = <&clks CLPS711X_CLK_BUS>; |
| 113 |
syscon = <&syscon1>; |
| 114 |
status = "disabled"; |
| 115 |
}; |
| 116 |
|
| 117 |
timer1: timer@80000300 { |
| 118 |
compatible = "cirrus,ep7209-timer"; |
| 119 |
reg = <0x80000300 0x4>; |
| 120 |
clocks = <&clks CLPS711X_CLK_TIMER1>; |
| 121 |
interrupts = <8>; |
| 122 |
}; |
| 123 |
|
| 124 |
timer2: timer@80000340 { |
| 125 |
compatible = "cirrus,ep7209-timer"; |
| 126 |
reg = <0x80000340 0x4>; |
| 127 |
clocks = <&clks CLPS711X_CLK_TIMER2>; |
| 128 |
interrupts = <9>; |
| 129 |
}; |
| 130 |
|
| 131 |
pwm: pwm@80000400 { |
| 132 |
compatible = "cirrus,ep7209-pwm"; |
| 133 |
reg = <0x80000400 0x4>; |
| 134 |
clocks = <&clks CLPS711X_CLK_PWM>; |
| 135 |
#pwm-cells = <1>; |
| 136 |
}; |
| 137 |
|
| 138 |
uart1: serial@80000480 { |
| 139 |
compatible = "cirrus,ep7209-uart"; |
| 140 |
reg = <0x80000480 0x80>; |
| 141 |
interrupts = <12 13>; |
| 142 |
clocks = <&clks CLPS711X_CLK_UART>; |
| 143 |
syscon = <&syscon1>; |
| 144 |
}; |
| 145 |
|
| 146 |
spi: spi@80000500 { |
| 147 |
#address-cells = <1>; |
| 148 |
#size-cells = <0>; |
| 149 |
compatible = "cirrus,ep7209-spi"; |
| 150 |
reg = <0x80000500 0x4>; |
| 151 |
interrupts = <15>; |
| 152 |
clocks = <&clks CLPS711X_CLK_SPI>; |
| 153 |
syscon = <&syscon3>; |
| 154 |
status = "disabled"; |
| 155 |
}; |
| 156 |
|
| 157 |
syscon2: syscon@80001100 { |
| 158 |
compatible = "cirrus,ep7209-syscon2", "syscon"; |
| 159 |
reg = <0x80001100 0x80>; |
| 160 |
}; |
| 161 |
|
| 162 |
uart2: serial@80001480 { |
| 163 |
compatible = "cirrus,ep7209-uart"; |
| 164 |
reg = <0x80001480 0x80>; |
| 165 |
interrupts = <28 29>; |
| 166 |
clocks = <&clks CLPS711X_CLK_UART>; |
| 167 |
syscon = <&syscon2>; |
| 168 |
}; |
| 169 |
|
| 170 |
dai: dai@80002000 { |
| 171 |
#sound-dai-cells = <0>; |
| 172 |
compatible = "cirrus,ep7209-dai"; |
| 173 |
reg = <0x80002000 0x604>; |
| 174 |
clocks = <&clks CLPS711X_CLK_PLL>; |
| 175 |
clock-names = "pll"; |
| 176 |
interrupts = <32>; |
| 177 |
syscon = <&syscon3>; |
| 178 |
status = "disabled"; |
| 179 |
}; |
| 180 |
|
| 181 |
syscon3: syscon@80002200 { |
| 182 |
compatible = "cirrus,ep7209-syscon3", "syscon"; |
| 183 |
reg = <0x80002200 0x40>; |
| 184 |
}; |
| 185 |
}; |
| 186 |
|
| 187 |
keypad: keypad { |
| 188 |
compatible = "cirrus,ep7209-keypad"; |
| 189 |
interrupt-parent = <&intc>; |
| 190 |
interrupts = <16>; |
| 191 |
syscon = <&syscon1>; |
| 192 |
status = "disabled"; |
| 193 |
}; |
| 194 |
|
| 195 |
mctrl: mctrl { |
| 196 |
compatible = "cirrus,ep7209-mctrl-gpio"; |
| 197 |
gpio,syscon-dev = <&syscon1 0 0>; |
| 198 |
gpio-controller; |
| 199 |
#gpio-cells = <2>; |
| 200 |
}; |
| 201 |
}; |