| 1 |
.. SPDX-License-Identifier: GPL-2.0 |
| 2 |
|
| 3 |
================================ |
| 4 |
vidtv: Virtual Digital TV driver |
| 5 |
================================ |
| 6 |
|
| 7 |
Author: Daniel W. S. Almeida <[email protected]>, June 2020. |
| 8 |
|
| 9 |
Background |
| 10 |
---------- |
| 11 |
|
| 12 |
Vidtv is a virtual DVB driver that aims to serve as a reference for driver |
| 13 |
writers by serving as a template. It also validates the existing media DVB |
| 14 |
APIs, thus helping userspace application writers. |
| 15 |
|
| 16 |
Currently, it consists of: |
| 17 |
|
| 18 |
- A fake tuner driver, which will report a bad signal quality if the chosen |
| 19 |
frequency is too far away from a table of valid frequencies for a |
| 20 |
particular delivery system. |
| 21 |
|
| 22 |
- A fake demod driver, which will constantly poll the fake signal quality |
| 23 |
returned by the tuner, simulating a device that can lose/reacquire a lock |
| 24 |
on the signal depending on the CNR levels. |
| 25 |
|
| 26 |
- A fake bridge driver, which is the module responsible for modprobing the |
| 27 |
fake tuner and demod modules and implementing the demux logic. This module |
| 28 |
takes parameters at initialization that will dictate how the simulation |
| 29 |
behaves. |
| 30 |
|
| 31 |
- Code responsible for encoding a valid MPEG Transport Stream, which is then |
| 32 |
passed to the bridge driver. This fake stream contains some hardcoded content. |
| 33 |
For now, we have a single, audio-only channel containing a single MPEG |
| 34 |
Elementary Stream, which in turn contains a SMPTE 302m encoded sine-wave. |
| 35 |
Note that this particular encoder was chosen because it is the easiest |
| 36 |
way to encode PCM audio data in a MPEG Transport Stream. |
| 37 |
|
| 38 |
Building vidtv |
| 39 |
-------------- |
| 40 |
vidtv is a test driver and thus is **not** enabled by default when |
| 41 |
compiling the kernel. |
| 42 |
|
| 43 |
In order to enable compilation of vidtv: |
| 44 |
|
| 45 |
- Enable **DVB_TEST_DRIVERS**, then |
| 46 |
- Enable **DVB_VIDTV** |
| 47 |
|
| 48 |
When compiled as a module, expect the following .ko files: |
| 49 |
|
| 50 |
- dvb_vidtv_tuner.ko |
| 51 |
|
| 52 |
- dvb_vidtv_demod.ko |
| 53 |
|
| 54 |
- dvb_vidtv_bridge.ko |
| 55 |
|
| 56 |
Running vidtv |
| 57 |
------------- |
| 58 |
When compiled as a module, run:: |
| 59 |
|
| 60 |
modprobe vidtv |
| 61 |
|
| 62 |
That's it! The bridge driver will initialize the tuner and demod drivers as |
| 63 |
part of its own initialization. |
| 64 |
|
| 65 |
By default, it will accept the following frequencies: |
| 66 |
|
| 67 |
- 474 MHz for DVB-T/T2/C; |
| 68 |
- 11,362 GHz for DVB-S/S2. |
| 69 |
|
| 70 |
For satellite systems, the driver simulates an universal extended |
| 71 |
LNBf, with frequencies at Ku-Band, ranging from 10.7 GHz to 12.75 GHz. |
| 72 |
|
| 73 |
You can optionally define some command-line arguments to vidtv. |
| 74 |
|
| 75 |
Command-line arguments to vidtv |
| 76 |
------------------------------- |
| 77 |
Below is a list of all arguments that can be supplied to vidtv: |
| 78 |
|
| 79 |
drop_tslock_prob_on_low_snr |
| 80 |
Probability of losing the TS lock if the signal quality is bad. |
| 81 |
This probability be used by the fake demodulator driver to |
| 82 |
eventually return a status of 0 when the signal quality is not |
| 83 |
good. |
| 84 |
|
| 85 |
recover_tslock_prob_on_good_snr: |
| 86 |
Probability recovering the TS lock when the signal improves. This |
| 87 |
probability be used by the fake demodulator driver to eventually |
| 88 |
return a status of 0x1f when/if the signal quality improves. |
| 89 |
|
| 90 |
mock_power_up_delay_msec |
| 91 |
Simulate a power up delay. Default: 0. |
| 92 |
|
| 93 |
mock_tune_delay_msec |
| 94 |
Simulate a tune delay. Default 0. |
| 95 |
|
| 96 |
vidtv_valid_dvb_t_freqs |
| 97 |
Valid DVB-T frequencies to simulate, in Hz. |
| 98 |
|
| 99 |
vidtv_valid_dvb_c_freqs |
| 100 |
Valid DVB-C frequencies to simulate, in Hz. |
| 101 |
|
| 102 |
vidtv_valid_dvb_s_freqs |
| 103 |
Valid DVB-S/S2 frequencies to simulate at Ku-Band, in kHz. |
| 104 |
|
| 105 |
max_frequency_shift_hz, |
| 106 |
Maximum shift in HZ allowed when tuning in a channel. |
| 107 |
|
| 108 |
si_period_msec |
| 109 |
How often to send SI packets. Default: 40ms. |
| 110 |
|
| 111 |
pcr_period_msec |
| 112 |
How often to send PCR packets. Default: 40ms. |
| 113 |
|
| 114 |
mux_rate_kbytes_sec |
| 115 |
Attempt to maintain this bit rate by inserting TS null packets, if |
| 116 |
necessary. Default: 4096. |
| 117 |
|
| 118 |
pcr_pid, |
| 119 |
PCR PID for all channels. Default: 0x200. |
| 120 |
|
| 121 |
mux_buf_sz_pkts, |
| 122 |
Size for the mux buffer in multiples of 188 bytes. |
| 123 |
|
| 124 |
vidtv internal structure |
| 125 |
------------------------ |
| 126 |
The kernel modules are split in the following way: |
| 127 |
|
| 128 |
vidtv_tuner.[ch] |
| 129 |
Implements a fake tuner DVB driver. |
| 130 |
|
| 131 |
vidtv_demod.[ch] |
| 132 |
Implements a fake demodulator DVB driver. |
| 133 |
|
| 134 |
vidtv_bridge.[ch] |
| 135 |
Implements a bridge driver. |
| 136 |
|
| 137 |
The MPEG related code is split in the following way: |
| 138 |
|
| 139 |
vidtv_ts.[ch] |
| 140 |
Code to work with MPEG TS packets, such as TS headers, adaptation |
| 141 |
fields, PCR packets and NULL packets. |
| 142 |
|
| 143 |
vidtv_psi.[ch] |
| 144 |
This is the PSI generator. PSI packets contain general information |
| 145 |
about a MPEG Transport Stream. A PSI generator is needed so |
| 146 |
userspace apps can retrieve information about the Transport Stream |
| 147 |
and eventually tune into a (dummy) channel. |
| 148 |
|
| 149 |
Because the generator is implemented in a separate file, it can be |
| 150 |
reused elsewhere in the media subsystem. |
| 151 |
|
| 152 |
Currently vidtv supports working with 5 PSI tables: PAT, PMT, |
| 153 |
SDT, NIT and EIT. |
| 154 |
|
| 155 |
The specification for PAT and PMT can be found in *ISO 13818-1: |
| 156 |
Systems*, while the specification for the SDT, NIT, EIT can be found in *ETSI |
| 157 |
EN 300 468: Specification for Service Information (SI) in DVB |
| 158 |
systems*. |
| 159 |
|
| 160 |
It isn't strictly necessary, but using a real TS file helps when |
| 161 |
debugging PSI tables. Vidtv currently tries to replicate the PSI |
| 162 |
structure found in this file: `TS1Globo.ts |
| 163 |
<https://tsduck.io/streams/brazil-isdb-tb/TS1globo.ts>`_. |
| 164 |
|
| 165 |
A good way to visualize the structure of streams is by using |
| 166 |
`DVBInspector <https://sourceforge.net/projects/dvbinspector/>`_. |
| 167 |
|
| 168 |
vidtv_pes.[ch] |
| 169 |
Implements the PES logic to convert encoder data into MPEG TS |
| 170 |
packets. These can then be fed into a TS multiplexer and eventually |
| 171 |
into userspace. |
| 172 |
|
| 173 |
vidtv_encoder.h |
| 174 |
An interface for vidtv encoders. New encoders can be added to this |
| 175 |
driver by implementing the calls in this file. |
| 176 |
|
| 177 |
vidtv_s302m.[ch] |
| 178 |
Implements a S302M encoder to make it possible to insert PCM audio |
| 179 |
data in the generated MPEG Transport Stream. The relevant |
| 180 |
specification is available online as *SMPTE 302M-2007: Television - |
| 181 |
Mapping of AES3 Data into MPEG-2 Transport Stream*. |
| 182 |
|
| 183 |
|
| 184 |
The resulting MPEG Elementary Stream is conveyed in a private |
| 185 |
stream with a S302M registration descriptor attached. |
| 186 |
|
| 187 |
This shall enable passing an audio signal into userspace so it can |
| 188 |
be decoded and played by media software. The corresponding decoder |
| 189 |
in ffmpeg is located in 'libavcodec/s302m.c' and is experimental. |
| 190 |
|
| 191 |
vidtv_channel.[ch] |
| 192 |
Implements a 'channel' abstraction. |
| 193 |
|
| 194 |
When vidtv boots, it will create some hardcoded channels: |
| 195 |
|
| 196 |
#. Their services will be concatenated to populate the SDT. |
| 197 |
|
| 198 |
#. Their programs will be concatenated to populate the PAT |
| 199 |
|
| 200 |
#. Their events will be concatenated to populate the EIT |
| 201 |
|
| 202 |
#. For each program in the PAT, a PMT section will be created |
| 203 |
|
| 204 |
#. The PMT section for a channel will be assigned its streams. |
| 205 |
|
| 206 |
#. Every stream will have its corresponding encoder polled in a |
| 207 |
loop to produce TS packets. |
| 208 |
These packets may be interleaved by the muxer and then delivered |
| 209 |
to the bridge. |
| 210 |
|
| 211 |
vidtv_mux.[ch] |
| 212 |
Implements a MPEG TS mux, loosely based on the ffmpeg |
| 213 |
implementation in "libavcodec/mpegtsenc.c" |
| 214 |
|
| 215 |
The muxer runs a loop which is responsible for: |
| 216 |
|
| 217 |
#. Keeping track of the amount of time elapsed since the last |
| 218 |
iteration. |
| 219 |
|
| 220 |
#. Polling encoders in order to fetch 'elapsed_time' worth of data. |
| 221 |
|
| 222 |
#. Inserting PSI and/or PCR packets, if needed. |
| 223 |
|
| 224 |
#. Padding the resulting stream with NULL packets if |
| 225 |
necessary in order to maintain the chosen bit rate. |
| 226 |
|
| 227 |
#. Delivering the resulting TS packets to the bridge |
| 228 |
driver so it can pass them to the demux. |
| 229 |
|
| 230 |
Testing vidtv with v4l-utils |
| 231 |
---------------------------- |
| 232 |
|
| 233 |
Using the tools in v4l-utils is a great way to test and inspect the output of |
| 234 |
vidtv. It is hosted here: `v4l-utils Documentation |
| 235 |
<https://linuxtv.org/wiki/index.php/V4l-utils>`_. |
| 236 |
|
| 237 |
From its webpage:: |
| 238 |
|
| 239 |
The v4l-utils are a series of packages for handling media devices. |
| 240 |
|
| 241 |
It is hosted at http://git.linuxtv.org/v4l-utils.git, and packaged |
| 242 |
on most distributions. |
| 243 |
|
| 244 |
It provides a series of libraries and utilities to be used to |
| 245 |
control several aspect of the media boards. |
| 246 |
|
| 247 |
|
| 248 |
Start by installing v4l-utils and then modprobing vidtv:: |
| 249 |
|
| 250 |
modprobe dvb_vidtv_bridge |
| 251 |
|
| 252 |
If the driver is OK, it should load and its probing code will run. This will |
| 253 |
pull in the tuner and demod drivers. |
| 254 |
|
| 255 |
Using dvb-fe-tool |
| 256 |
~~~~~~~~~~~~~~~~~ |
| 257 |
|
| 258 |
The first step to check whether the demod loaded successfully is to run:: |
| 259 |
|
| 260 |
$ dvb-fe-tool |
| 261 |
Device Dummy demod for DVB-T/T2/C/S/S2 (/dev/dvb/adapter0/frontend0) capabilities: |
| 262 |
CAN_FEC_1_2 |
| 263 |
CAN_FEC_2_3 |
| 264 |
CAN_FEC_3_4 |
| 265 |
CAN_FEC_4_5 |
| 266 |
CAN_FEC_5_6 |
| 267 |
CAN_FEC_6_7 |
| 268 |
CAN_FEC_7_8 |
| 269 |
CAN_FEC_8_9 |
| 270 |
CAN_FEC_AUTO |
| 271 |
CAN_GUARD_INTERVAL_AUTO |
| 272 |
CAN_HIERARCHY_AUTO |
| 273 |
CAN_INVERSION_AUTO |
| 274 |
CAN_QAM_16 |
| 275 |
CAN_QAM_32 |
| 276 |
CAN_QAM_64 |
| 277 |
CAN_QAM_128 |
| 278 |
CAN_QAM_256 |
| 279 |
CAN_QAM_AUTO |
| 280 |
CAN_QPSK |
| 281 |
CAN_TRANSMISSION_MODE_AUTO |
| 282 |
DVB API Version 5.11, Current v5 delivery system: DVBC/ANNEX_A |
| 283 |
Supported delivery systems: |
| 284 |
DVBT |
| 285 |
DVBT2 |
| 286 |
[DVBC/ANNEX_A] |
| 287 |
DVBS |
| 288 |
DVBS2 |
| 289 |
Frequency range for the current standard: |
| 290 |
From: 51.0 MHz |
| 291 |
To: 2.15 GHz |
| 292 |
Step: 62.5 kHz |
| 293 |
Tolerance: 29.5 MHz |
| 294 |
Symbol rate ranges for the current standard: |
| 295 |
From: 1.00 MBauds |
| 296 |
To: 45.0 MBauds |
| 297 |
|
| 298 |
This should return what is currently set up at the demod struct, i.e.:: |
| 299 |
|
| 300 |
static const struct dvb_frontend_ops vidtv_demod_ops = { |
| 301 |
.delsys = { |
| 302 |
SYS_DVBT, |
| 303 |
SYS_DVBT2, |
| 304 |
SYS_DVBC_ANNEX_A, |
| 305 |
SYS_DVBS, |
| 306 |
SYS_DVBS2, |
| 307 |
}, |
| 308 |
|
| 309 |
.info = { |
| 310 |
.name = "Dummy demod for DVB-T/T2/C/S/S2", |
| 311 |
.frequency_min_hz = 51 * MHz, |
| 312 |
.frequency_max_hz = 2150 * MHz, |
| 313 |
.frequency_stepsize_hz = 62500, |
| 314 |
.frequency_tolerance_hz = 29500 * kHz, |
| 315 |
.symbol_rate_min = 1000000, |
| 316 |
.symbol_rate_max = 45000000, |
| 317 |
|
| 318 |
.caps = FE_CAN_FEC_1_2 | |
| 319 |
FE_CAN_FEC_2_3 | |
| 320 |
FE_CAN_FEC_3_4 | |
| 321 |
FE_CAN_FEC_4_5 | |
| 322 |
FE_CAN_FEC_5_6 | |
| 323 |
FE_CAN_FEC_6_7 | |
| 324 |
FE_CAN_FEC_7_8 | |
| 325 |
FE_CAN_FEC_8_9 | |
| 326 |
FE_CAN_QAM_16 | |
| 327 |
FE_CAN_QAM_64 | |
| 328 |
FE_CAN_QAM_32 | |
| 329 |
FE_CAN_QAM_128 | |
| 330 |
FE_CAN_QAM_256 | |
| 331 |
FE_CAN_QAM_AUTO | |
| 332 |
FE_CAN_QPSK | |
| 333 |
FE_CAN_FEC_AUTO | |
| 334 |
FE_CAN_INVERSION_AUTO | |
| 335 |
FE_CAN_TRANSMISSION_MODE_AUTO | |
| 336 |
FE_CAN_GUARD_INTERVAL_AUTO | |
| 337 |
FE_CAN_HIERARCHY_AUTO, |
| 338 |
} |
| 339 |
|
| 340 |
.... |
| 341 |
|
| 342 |
For more information on dvb-fe-tools check its online documentation here: |
| 343 |
`dvb-fe-tool Documentation |
| 344 |
<https://www.linuxtv.org/wiki/index.php/Dvb-fe-tool>`_. |
| 345 |
|
| 346 |
Using dvb-scan |
| 347 |
~~~~~~~~~~~~~~ |
| 348 |
|
| 349 |
In order to tune into a channel and read the PSI tables, we can use dvb-scan. |
| 350 |
|
| 351 |
For this, one should provide a configuration file known as a 'scan file', |
| 352 |
here's an example:: |
| 353 |
|
| 354 |
[Channel] |
| 355 |
FREQUENCY = 474000000 |
| 356 |
MODULATION = QAM/AUTO |
| 357 |
SYMBOL_RATE = 6940000 |
| 358 |
INNER_FEC = AUTO |
| 359 |
DELIVERY_SYSTEM = DVBC/ANNEX_A |
| 360 |
|
| 361 |
.. note:: |
| 362 |
The parameters depend on the video standard you're testing. |
| 363 |
|
| 364 |
.. note:: |
| 365 |
Vidtv is a fake driver and does not validate much of the information |
| 366 |
in the scan file. Just specifying 'FREQUENCY' and 'DELIVERY_SYSTEM' |
| 367 |
should be enough for DVB-T/DVB-T2. For DVB-S/DVB-C however, you |
| 368 |
should also provide 'SYMBOL_RATE'. |
| 369 |
|
| 370 |
You can browse scan tables online here: `dvb-scan-tables |
| 371 |
<https://git.linuxtv.org/dtv-scan-tables.git>`_. |
| 372 |
|
| 373 |
Assuming this channel is named 'channel.conf', you can then run:: |
| 374 |
|
| 375 |
$ dvbv5-scan channel.conf |
| 376 |
dvbv5-scan ~/vidtv.conf |
| 377 |
ERROR command BANDWIDTH_HZ (5) not found during retrieve |
| 378 |
Cannot calc frequency shift. Either bandwidth/symbol-rate is unavailable (yet). |
| 379 |
Scanning frequency #1 330000000 |
| 380 |
(0x00) Signal= -68.00dBm |
| 381 |
Scanning frequency #2 474000000 |
| 382 |
Lock (0x1f) Signal= -34.45dBm C/N= 33.74dB UCB= 0 |
| 383 |
Service Beethoven, provider LinuxTV.org: digital television |
| 384 |
|
| 385 |
For more information on dvb-scan, check its documentation online here: |
| 386 |
`dvb-scan Documentation <https://www.linuxtv.org/wiki/index.php/Dvbscan>`_. |
| 387 |
|
| 388 |
Using dvb-zap |
| 389 |
~~~~~~~~~~~~~ |
| 390 |
|
| 391 |
dvbv5-zap is a command line tool that can be used to record MPEG-TS to disk. The |
| 392 |
typical use is to tune into a channel and put it into record mode. The example |
| 393 |
below - which is taken from the documentation - illustrates that\ [1]_:: |
| 394 |
|
| 395 |
$ dvbv5-zap -c dvb_channel.conf "beethoven" -o music.ts -P -t 10 |
| 396 |
using demux 'dvb0.demux0' |
| 397 |
reading channels from file 'dvb_channel.conf' |
| 398 |
tuning to 474000000 Hz |
| 399 |
pass all PID's to TS |
| 400 |
dvb_set_pesfilter 8192 |
| 401 |
dvb_dev_set_bufsize: buffer set to 6160384 |
| 402 |
Lock (0x1f) Quality= Good Signal= -34.66dBm C/N= 33.41dB UCB= 0 postBER= 0 preBER= 1.05x10^-3 PER= 0 |
| 403 |
Lock (0x1f) Quality= Good Signal= -34.57dBm C/N= 33.46dB UCB= 0 postBER= 0 preBER= 1.05x10^-3 PER= 0 |
| 404 |
Record to file 'music.ts' started |
| 405 |
received 24587768 bytes (2401 Kbytes/sec) |
| 406 |
Lock (0x1f) Quality= Good Signal= -34.42dBm C/N= 33.89dB UCB= 0 postBER= 0 preBER= 2.44x10^-3 PER= 0 |
| 407 |
|
| 408 |
.. [1] In this example, it records 10 seconds with all program ID's stored |
| 409 |
at the music.ts file. |
| 410 |
|
| 411 |
|
| 412 |
The channel can be watched by playing the contents of the stream with some |
| 413 |
player that recognizes the MPEG-TS format, such as ``mplayer`` or ``vlc``. |
| 414 |
|
| 415 |
By playing the contents of the stream one can visually inspect the workings of |
| 416 |
vidtv, e.g., to play a recorded TS file with:: |
| 417 |
|
| 418 |
$ mplayer music.ts |
| 419 |
|
| 420 |
or, alternatively, running this command on one terminal:: |
| 421 |
|
| 422 |
$ dvbv5-zap -c dvb_channel.conf "beethoven" -P -r & |
| 423 |
|
| 424 |
And, on a second terminal, playing the contents from DVR interface with:: |
| 425 |
|
| 426 |
$ mplayer /dev/dvb/adapter0/dvr0 |
| 427 |
|
| 428 |
For more information on dvb-zap check its online documentation here: |
| 429 |
`dvb-zap Documentation |
| 430 |
<https://www.linuxtv.org/wiki/index.php/Dvbv5-zap>`_. |
| 431 |
See also: `zap <https://www.linuxtv.org/wiki/index.php/Zap>`_. |
| 432 |
|
| 433 |
|
| 434 |
What can still be improved in vidtv |
| 435 |
----------------------------------- |
| 436 |
|
| 437 |
Add *debugfs* integration |
| 438 |
~~~~~~~~~~~~~~~~~~~~~~~~~ |
| 439 |
|
| 440 |
Although frontend drivers provide DVBv5 statistics via the .read_status |
| 441 |
call, a nice addition would be to make additional statistics available to |
| 442 |
userspace via debugfs, which is a simple-to-use, RAM-based filesystem |
| 443 |
specifically designed for debug purposes. |
| 444 |
|
| 445 |
The logic for this would be implemented on a separate file so as not to |
| 446 |
pollute the frontend driver. These statistics are driver-specific and can |
| 447 |
be useful during tests. |
| 448 |
|
| 449 |
The Siano driver is one example of a driver using |
| 450 |
debugfs to convey driver-specific statistics to userspace and it can be |
| 451 |
used as a reference. |
| 452 |
|
| 453 |
This should be further enabled and disabled via a Kconfig |
| 454 |
option for convenience. |
| 455 |
|
| 456 |
Add a way to test video |
| 457 |
~~~~~~~~~~~~~~~~~~~~~~~ |
| 458 |
|
| 459 |
Currently, vidtv can only encode PCM audio. It would be great to implement |
| 460 |
a barebones version of MPEG-2 video encoding so we can also test video. The |
| 461 |
first place to look into is *ISO 13818-2: Information technology — Generic |
| 462 |
coding of moving pictures and associated audio information — Part 2: Video*, |
| 463 |
which covers the encoding of compressed video in MPEG Transport Streams. |
| 464 |
|
| 465 |
This might optionally use the Video4Linux2 Test Pattern Generator, v4l2-tpg, |
| 466 |
which resides at:: |
| 467 |
|
| 468 |
drivers/media/common/v4l2-tpg/ |
| 469 |
|
| 470 |
|
| 471 |
Add white noise simulation |
| 472 |
~~~~~~~~~~~~~~~~~~~~~~~~~~ |
| 473 |
|
| 474 |
The vidtv tuner already has code to identify whether the chosen frequency |
| 475 |
is too far away from a table of valid frequencies. For now, this means that |
| 476 |
the demodulator can eventually lose the lock on the signal, since the tuner will |
| 477 |
report a bad signal quality. |
| 478 |
|
| 479 |
A nice addition is to simulate some noise when the signal quality is bad by: |
| 480 |
|
| 481 |
- Randomly dropping some TS packets. This will trigger a continuity error if the |
| 482 |
continuity counter is updated but the packet is not passed on to the demux. |
| 483 |
|
| 484 |
- Updating the error statistics accordingly (e.g. BER, etc). |
| 485 |
|
| 486 |
- Simulating some noise in the encoded data. |
| 487 |
|
| 488 |
Functions and structs used within vidtv |
| 489 |
--------------------------------------- |
| 490 |
|
| 491 |
.. kernel-doc:: drivers/media/test-drivers/vidtv/vidtv_bridge.h |
| 492 |
|
| 493 |
.. kernel-doc:: drivers/media/test-drivers/vidtv/vidtv_channel.h |
| 494 |
|
| 495 |
.. kernel-doc:: drivers/media/test-drivers/vidtv/vidtv_demod.h |
| 496 |
|
| 497 |
.. kernel-doc:: drivers/media/test-drivers/vidtv/vidtv_encoder.h |
| 498 |
|
| 499 |
.. kernel-doc:: drivers/media/test-drivers/vidtv/vidtv_mux.h |
| 500 |
|
| 501 |
.. kernel-doc:: drivers/media/test-drivers/vidtv/vidtv_pes.h |
| 502 |
|
| 503 |
.. kernel-doc:: drivers/media/test-drivers/vidtv/vidtv_psi.h |
| 504 |
|
| 505 |
.. kernel-doc:: drivers/media/test-drivers/vidtv/vidtv_s302m.h |
| 506 |
|
| 507 |
.. kernel-doc:: drivers/media/test-drivers/vidtv/vidtv_ts.h |
| 508 |
|
| 509 |
.. kernel-doc:: drivers/media/test-drivers/vidtv/vidtv_tuner.h |
| 510 |
|
| 511 |
.. kernel-doc:: drivers/media/test-drivers/vidtv/vidtv_common.c |
| 512 |
|
| 513 |
.. kernel-doc:: drivers/media/test-drivers/vidtv/vidtv_tuner.c |