| 1 |
@model |
| 2 |
Feature: Model |
| 3 |
|
| 4 |
Scenario: Add type instance - add from a mesh |
| 5 |
Given an empty IFC project |
| 6 |
And I add a cube |
| 7 |
And the object "Cube" is selected |
| 8 |
And I set "scene.BIMRootProperties.ifc_product" to "IfcElementType" |
| 9 |
And I set "scene.BIMRootProperties.ifc_class" to "IfcWallType" |
| 10 |
And I press "bim.assign_class" |
| 11 |
And I set "scene.BIMModelProperties.ifc_class" to "IfcWallType" |
| 12 |
And the variable "cube" is "{ifc}.by_type('IfcWallType')[0].id()" |
| 13 |
And I set "scene.BIMModelProperties.relating_type_id" to "{cube}" |
| 14 |
When I press "bim.add_occurrence" |
| 15 |
Then the object "IfcWall/Wall" exists |
| 16 |
|
| 17 |
Scenario: Add type instance - add from an empty |
| 18 |
Given an empty IFC project |
| 19 |
And I add an empty |
| 20 |
And the object "Empty" is selected |
| 21 |
And I set "scene.BIMRootProperties.ifc_product" to "IfcElementType" |
| 22 |
And I set "scene.BIMRootProperties.ifc_class" to "IfcWallType" |
| 23 |
And I press "bim.assign_class" |
| 24 |
And I set "scene.BIMModelProperties.ifc_class" to "IfcWallType" |
| 25 |
And the variable "empty" is "{ifc}.by_type('IfcWallType')[0].id()" |
| 26 |
And I set "scene.BIMModelProperties.relating_type_id" to "{empty}" |
| 27 |
When I press "bim.add_occurrence" |
| 28 |
Then the object "IfcWall/Wall" exists |
| 29 |
|
| 30 |
Scenario: Add type instance - add a mesh where existing instances have changed context |
| 31 |
Given an empty IFC project |
| 32 |
And I add a cube |
| 33 |
And the object "Cube" is selected |
| 34 |
And I set "scene.BIMRootProperties.ifc_product" to "IfcElementType" |
| 35 |
And I set "scene.BIMRootProperties.ifc_class" to "IfcWallType" |
| 36 |
And I press "bim.assign_class" |
| 37 |
And I set "scene.BIMModelProperties.ifc_class" to "IfcWallType" |
| 38 |
And the variable "cube" is "{ifc}.by_type('IfcWallType')[0].id()" |
| 39 |
And I set "scene.BIMModelProperties.relating_type_id" to "{cube}" |
| 40 |
And I press "bim.add_occurrence" |
| 41 |
And the object "IfcWall/Wall" data is a "Tessellation" representation of "Model/Body/MODEL_VIEW" |
| 42 |
And the object "IfcWall/Wall" is selected |
| 43 |
And the variable "context" is "[c for c in {ifc}.by_type('IfcGeometricRepresentationSubContext') if c.ContextType == 'Plan' and c.ContextIdentifier == 'Body' and c.TargetView == 'PLAN_VIEW'][0].id()" |
| 44 |
And I set "active_object.BIMGeometryProperties.contexts" to "{context}" |
| 45 |
And I press "bim.add_representation" |
| 46 |
And the object "IfcWall/Wall" data is a "Annotation2D" representation of "Plan/Body/PLAN_VIEW" |
| 47 |
When I press "bim.add_occurrence" |
| 48 |
Then the object "IfcWall/Wall" data is a "Annotation2D" representation of "Plan/Body/PLAN_VIEW" |
| 49 |
And the object "IfcWall/Wall.001" data is a "Annotation2D" representation of "Plan/Body/PLAN_VIEW" |
| 50 |
|
| 51 |
Scenario: Add one type from the Construction Type Browser |
| 52 |
Given an empty IFC project |
| 53 |
And I load the demo construction library |
| 54 |
When I set "scene.BIMModelProperties.ifc_class" to "IfcColumnType" |
| 55 |
And I add the construction type |
| 56 |
Then the object "IfcColumn/Column" exists |
| 57 |
|
| 58 |
Scenario: Add grid |
| 59 |
Given an empty IFC project |
| 60 |
When I press "mesh.add_grid" |
| 61 |
Then the object "IfcGrid/Grid" is an "IfcGrid" |
| 62 |
And the object "IfcGridAxis/A" is an "IfcGridAxis" |
| 63 |
And the object "IfcGridAxis/B" is an "IfcGridAxis" |
| 64 |
And the object "IfcGridAxis/C" is an "IfcGridAxis" |
| 65 |
And the object "IfcGridAxis/01" is an "IfcGridAxis" |
| 66 |
And the object "IfcGridAxis/02" is an "IfcGridAxis" |
| 67 |
And the object "IfcGridAxis/03" is an "IfcGridAxis" |
| 68 |
|
| 69 |
Scenario: Add a wall |
| 70 |
Given an empty IFC project |
| 71 |
And I load the demo construction library |
| 72 |
And I set "scene.BIMModelProperties.ifc_class" to "IfcWallType" |
| 73 |
And the variable "element_type" is "[e for e in {ifc}.by_type('IfcWallType') if e.Name == 'WAL100'][0].id()" |
| 74 |
And I set "scene.BIMModelProperties.relating_type_id" to "{element_type}" |
| 75 |
When I press "bim.add_occurrence" |
| 76 |
Then the object "IfcWall/Wall" is an "IfcWall" |
| 77 |
And the object "IfcWall/Wall" dimensions are "1,0.1,3" |
| 78 |
And the object "IfcWall/Wall" bottom left corner is at "0,0,0" |
| 79 |
|
| 80 |
Scenario: Extend a wall to the cursor |
| 81 |
Given an empty IFC project |
| 82 |
And I load the demo construction library |
| 83 |
And I set "scene.BIMModelProperties.ifc_class" to "IfcWallType" |
| 84 |
And the variable "element_type" is "[e for e in {ifc}.by_type('IfcWallType') if e.Name == 'WAL100'][0].id()" |
| 85 |
And I set "scene.BIMModelProperties.relating_type_id" to "{element_type}" |
| 86 |
And I press "bim.add_occurrence" |
| 87 |
And the object "IfcWall/Wall" is selected |
| 88 |
And the cursor is at "2,0,0" |
| 89 |
When I press "bim.hotkey(hotkey='S_E')" |
| 90 |
Then the object "IfcWall/Wall" dimensions are "2,0.1,3" |
| 91 |
And the object "IfcWall/Wall" bottom left corner is at "0,0,0" |
| 92 |
|
| 93 |
Scenario: Add a wall perpendicular to an existing wall |
| 94 |
Given an empty IFC project |
| 95 |
And I load the demo construction library |
| 96 |
And I set "scene.BIMModelProperties.ifc_class" to "IfcWallType" |
| 97 |
And the variable "element_type" is "[e for e in {ifc}.by_type('IfcWallType') if e.Name == 'WAL100'][0].id()" |
| 98 |
And I set "scene.BIMModelProperties.relating_type_id" to "{element_type}" |
| 99 |
And I press "bim.add_occurrence" |
| 100 |
And the cursor is at "0.5,0,0" |
| 101 |
When I press "bim.add_occurrence" |
| 102 |
Then the object "IfcWall/Wall" dimensions are "1,0.1,3" |
| 103 |
And the object "IfcWall/Wall" bottom left corner is at "0,0,0" |
| 104 |
And the object "IfcWall/Wall.001" dimensions are "1,0.1,3" |
| 105 |
And the object "IfcWall/Wall.001" bottom left corner is at "0.5,0,0" |
| 106 |
And the object "IfcWall/Wall.001" top right corner is at "0.6,-1,3" |
| 107 |
|
| 108 |
Scenario: Extend one wall to another |
| 109 |
Given an empty IFC project |
| 110 |
And I load the demo construction library |
| 111 |
And I set "scene.BIMModelProperties.ifc_class" to "IfcWallType" |
| 112 |
And the variable "element_type" is "[e for e in {ifc}.by_type('IfcWallType') if e.Name == 'WAL100'][0].id()" |
| 113 |
And I set "scene.BIMModelProperties.relating_type_id" to "{element_type}" |
| 114 |
And I press "bim.add_occurrence" |
| 115 |
And the cursor is at "0.5,0,0" |
| 116 |
And I press "bim.add_occurrence" |
| 117 |
And the object "IfcWall/Wall.001" is moved to "0.5,-1,0" |
| 118 |
And the object "IfcWall/Wall.001" is selected |
| 119 |
And additionally the object "IfcWall/Wall" is selected |
| 120 |
When I press "bim.hotkey(hotkey='S_E')" |
| 121 |
Then the object "IfcWall/Wall" dimensions are "1,0.1,3" |
| 122 |
And the object "IfcWall/Wall" bottom left corner is at "0,0,0" |
| 123 |
And the object "IfcWall/Wall.001" dimensions are "2,0.1,3" |
| 124 |
And the object "IfcWall/Wall.001" bottom left corner is at "0.5,0,0" |
| 125 |
And the object "IfcWall/Wall.001" top right corner is at "0.6,-2,3" |
| 126 |
|
| 127 |
Scenario: Join two walls with a mitre joint |
| 128 |
Given an empty IFC project |
| 129 |
And I load the demo construction library |
| 130 |
And I set "scene.BIMModelProperties.ifc_class" to "IfcWallType" |
| 131 |
And the variable "element_type" is "[e for e in {ifc}.by_type('IfcWallType') if e.Name == 'WAL100'][0].id()" |
| 132 |
And I set "scene.BIMModelProperties.relating_type_id" to "{element_type}" |
| 133 |
And I press "bim.add_occurrence" |
| 134 |
And the cursor is at "0.7,0,0" |
| 135 |
And I press "bim.add_occurrence" |
| 136 |
And the object "IfcWall/Wall.001" is selected |
| 137 |
And additionally the object "IfcWall/Wall" is selected |
| 138 |
When I press "bim.hotkey(hotkey='S_T')" |
| 139 |
Then the object "IfcWall/Wall" dimensions are "0.8,0.1,3" |
| 140 |
And the object "IfcWall/Wall" bottom left corner is at "0.0,0,0" |
| 141 |
And the object "IfcWall/Wall.001" dimensions are "1.1,0.1,3" |
| 142 |
And the object "IfcWall/Wall.001" bottom left corner is at "0.7,0.1,0" |
| 143 |
And the object "IfcWall/Wall.001" top right corner is at "0.8,-1,3" |
| 144 |
|
| 145 |
Scenario: Change the height of a wall |
| 146 |
Given an empty IFC project |
| 147 |
And I load the demo construction library |
| 148 |
And I set "scene.BIMModelProperties.ifc_class" to "IfcWallType" |
| 149 |
And the variable "element_type" is "[e for e in {ifc}.by_type('IfcWallType') if e.Name == 'WAL100'][0].id()" |
| 150 |
And I set "scene.BIMModelProperties.relating_type_id" to "{element_type}" |
| 151 |
And I press "bim.add_occurrence" |
| 152 |
And the object "IfcWall/Wall" is selected |
| 153 |
And I set "scene.BIMModelProperties.extrusion_depth" to "2.0" |
| 154 |
When I press "bim.change_extrusion_depth(depth=2.0)" |
| 155 |
Then the object "IfcWall/Wall" dimensions are "1,0.1,2" |
| 156 |
|
| 157 |
Scenario: Change the length of a wall |
| 158 |
Given an empty IFC project |
| 159 |
And I load the demo construction library |
| 160 |
And I set "scene.BIMModelProperties.ifc_class" to "IfcWallType" |
| 161 |
And the variable "element_type" is "[e for e in {ifc}.by_type('IfcWallType') if e.Name == 'WAL100'][0].id()" |
| 162 |
And I set "scene.BIMModelProperties.relating_type_id" to "{element_type}" |
| 163 |
And I press "bim.add_occurrence" |
| 164 |
And the object "IfcWall/Wall" is selected |
| 165 |
And I set "scene.BIMModelProperties.length" to "2.0" |
| 166 |
When I press "bim.change_layer_length(length=2.0)" |
| 167 |
Then the object "IfcWall/Wall" dimensions are "2,0.1,3" |
| 168 |
|
| 169 |
Scenario: Flip a wall |
| 170 |
Given an empty IFC project |
| 171 |
And I load the demo construction library |
| 172 |
And I set "scene.BIMModelProperties.ifc_class" to "IfcWallType" |
| 173 |
And the variable "element_type" is "[e for e in {ifc}.by_type('IfcWallType') if e.Name == 'WAL100'][0].id()" |
| 174 |
And I set "scene.BIMModelProperties.relating_type_id" to "{element_type}" |
| 175 |
And I press "bim.add_occurrence" |
| 176 |
And the object "IfcWall/Wall" is selected |
| 177 |
When I press "bim.hotkey(hotkey='S_F')" |
| 178 |
Then the object "IfcWall/Wall" dimensions are "1,0.1,3" |
| 179 |
And the object "IfcWall/Wall" bottom left corner is at "0,0,0" |
| 180 |
And the object "IfcWall/Wall" top right corner is at "1,0.1,3" |
| 181 |
|
| 182 |
Scenario: Split a wall |
| 183 |
Given an empty IFC project |
| 184 |
And I load the demo construction library |
| 185 |
And I set "scene.BIMModelProperties.ifc_class" to "IfcWallType" |
| 186 |
And the variable "element_type" is "[e for e in {ifc}.by_type('IfcWallType') if e.Name == 'WAL100'][0].id()" |
| 187 |
And I set "scene.BIMModelProperties.relating_type_id" to "{element_type}" |
| 188 |
And I press "bim.add_occurrence" |
| 189 |
And the object "IfcWall/Wall" is selected |
| 190 |
And the cursor is at "0.5,0,0" |
| 191 |
When I press "bim.hotkey(hotkey='S_K')" |
| 192 |
Then the object "IfcWall/Wall" is an "IfcWall" |
| 193 |
And the object "IfcWall/Wall.001" is an "IfcWall" |
| 194 |
And the object "IfcWall/Wall" dimensions are "0.5,0.1,3" |
| 195 |
And the object "IfcWall/Wall" bottom left corner is at "0,0,0" |
| 196 |
And the object "IfcWall/Wall" top right corner is at "0.5,0.1,3" |
| 197 |
And the object "IfcWall/Wall.001" dimensions are "0.5,0.1,3" |
| 198 |
And the object "IfcWall/Wall.001" bottom left corner is at "0.5,0,0" |
| 199 |
And the object "IfcWall/Wall.001" top right corner is at "1,0.1,3" |
| 200 |
|
| 201 |
Scenario: Rotate a wall by 90 degrees |
| 202 |
Given an empty IFC project |
| 203 |
And I load the demo construction library |
| 204 |
And I set "scene.BIMModelProperties.ifc_class" to "IfcWallType" |
| 205 |
And the variable "element_type" is "[e for e in {ifc}.by_type('IfcWallType') if e.Name == 'WAL100'][0].id()" |
| 206 |
And I set "scene.BIMModelProperties.relating_type_id" to "{element_type}" |
| 207 |
And I press "bim.add_occurrence" |
| 208 |
And the object "IfcWall/Wall" is selected |
| 209 |
When I press "bim.hotkey(hotkey='S_R')" |
| 210 |
Then the object "IfcWall/Wall" dimensions are "1,0.1,3" |
| 211 |
And the object "IfcWall/Wall" bottom left corner is at "0,0,0" |
| 212 |
And the object "IfcWall/Wall" top right corner is at "-0.1,1,3" |
| 213 |
|
| 214 |
Scenario: Regenerate a wall - after doing nothing interesting |
| 215 |
Given an empty IFC project |
| 216 |
And I load the demo construction library |
| 217 |
And I set "scene.BIMModelProperties.ifc_class" to "IfcWallType" |
| 218 |
And the variable "element_type" is "[e for e in {ifc}.by_type('IfcWallType') if e.Name == 'WAL100'][0].id()" |
| 219 |
And I set "scene.BIMModelProperties.relating_type_id" to "{element_type}" |
| 220 |
And I press "bim.add_occurrence" |
| 221 |
And the object "IfcWall/Wall" is selected |
| 222 |
When I press "bim.hotkey(hotkey='S_G')" |
| 223 |
Then the object "IfcWall/Wall" is an "IfcWall" |
| 224 |
And the object "IfcWall/Wall" dimensions are "1,0.1,3" |
| 225 |
And the object "IfcWall/Wall" bottom left corner is at "0,0,0" |
| 226 |
|
| 227 |
Scenario: Add a slab |
| 228 |
Given an empty IFC project |
| 229 |
And I load the demo construction library |
| 230 |
And I set "scene.BIMModelProperties.ifc_class" to "IfcSlabType" |
| 231 |
And the variable "element_type" is "[e for e in {ifc}.by_type('IfcSlabType') if e.Name == 'FLR200'][0].id()" |
| 232 |
And I set "scene.BIMModelProperties.relating_type_id" to "{element_type}" |
| 233 |
When I press "bim.add_occurrence" |
| 234 |
Then the object "IfcSlab/Slab" is an "IfcSlab" |
| 235 |
And the object "IfcSlab/Slab" dimensions are "1,1,0.2" |
| 236 |
And the object "IfcSlab/Slab" bottom left corner is at "0,0,0" |
| 237 |
And the object "IfcSlab/Slab" top right corner is at "1,1,0.2" |
| 238 |
|
| 239 |
Scenario: Enable editing a slab profile |
| 240 |
Given an empty IFC project |
| 241 |
And I load the demo construction library |
| 242 |
And I set "scene.BIMModelProperties.ifc_class" to "IfcSlabType" |
| 243 |
And the variable "element_type" is "[e for e in {ifc}.by_type('IfcSlabType') if e.Name == 'FLR200'][0].id()" |
| 244 |
And I set "scene.BIMModelProperties.relating_type_id" to "{element_type}" |
| 245 |
And I press "bim.add_occurrence" |
| 246 |
And the object "IfcSlab/Slab" is selected |
| 247 |
When I press "bim.hotkey(hotkey='S_E')" |
| 248 |
Then the object "IfcSlab/Slab" dimensions are "1,1,0" |
| 249 |
And the object "IfcSlab/Slab" bottom left corner is at "0,0,0" |
| 250 |
And the object "IfcSlab/Slab" top right corner is at "1,1,0" |
| 251 |
|
| 252 |
Scenario: Disable editing a slab profile |
| 253 |
Given an empty IFC project |
| 254 |
And I load the demo construction library |
| 255 |
And I set "scene.BIMModelProperties.ifc_class" to "IfcSlabType" |
| 256 |
And the variable "element_type" is "[e for e in {ifc}.by_type('IfcSlabType') if e.Name == 'FLR200'][0].id()" |
| 257 |
And I set "scene.BIMModelProperties.relating_type_id" to "{element_type}" |
| 258 |
And I press "bim.add_occurrence" |
| 259 |
And the object "IfcSlab/Slab" is selected |
| 260 |
And I press "bim.hotkey(hotkey='S_E')" |
| 261 |
When I press "bim.disable_editing_extrusion_profile" |
| 262 |
Then the object "IfcSlab/Slab" dimensions are "1,1,0.2" |
| 263 |
And the object "IfcSlab/Slab" bottom left corner is at "0,0,0" |
| 264 |
And the object "IfcSlab/Slab" top right corner is at "1,1,0.2" |
| 265 |
|
| 266 |
Scenario: Edit a slab profile |
| 267 |
Given an empty IFC project |
| 268 |
And I load the demo construction library |
| 269 |
And I set "scene.BIMModelProperties.ifc_class" to "IfcSlabType" |
| 270 |
And the variable "element_type" is "[e for e in {ifc}.by_type('IfcSlabType') if e.Name == 'FLR200'][0].id()" |
| 271 |
And I set "scene.BIMModelProperties.relating_type_id" to "{element_type}" |
| 272 |
And I press "bim.add_occurrence" |
| 273 |
And the object "IfcSlab/Slab" is selected |
| 274 |
And I press "bim.hotkey(hotkey='S_E')" |
| 275 |
When I press "bim.edit_extrusion_profile" |
| 276 |
Then the object "IfcSlab/Slab" dimensions are "1,1,0.2" |
| 277 |
And the object "IfcSlab/Slab" bottom left corner is at "0,0,0" |
| 278 |
And the object "IfcSlab/Slab" top right corner is at "1,1,0.2" |
| 279 |
|
| 280 |
Scenario: Add a beam |
| 281 |
Given an empty IFC project |
| 282 |
And I load the demo construction library |
| 283 |
And I set "scene.BIMModelProperties.ifc_class" to "IfcBeamType" |
| 284 |
And the variable "element_type" is "[e for e in {ifc}.by_type('IfcBeamType') if e.Name == 'B1'][0].id()" |
| 285 |
And I set "scene.BIMModelProperties.relating_type_id" to "{element_type}" |
| 286 |
When I press "bim.add_occurrence" |
| 287 |
Then the object "IfcBeam/Beam" is an "IfcBeam" |
| 288 |
And the object "IfcBeam/Beam" dimensions are "0.1,0.2,3" |
| 289 |
And the object "IfcBeam/Beam" bottom left corner is at "0,-0.05,-0.1" |
| 290 |
And the object "IfcBeam/Beam" top right corner is at "3,0.05,0.1" |
| 291 |
|
| 292 |
Scenario: Extend a beam to the cursor |
| 293 |
Given an empty IFC project |
| 294 |
And I load the demo construction library |
| 295 |
And I set "scene.BIMModelProperties.ifc_class" to "IfcBeamType" |
| 296 |
And the variable "element_type" is "[e for e in {ifc}.by_type('IfcBeamType') if e.Name == 'B1'][0].id()" |
| 297 |
And I set "scene.BIMModelProperties.relating_type_id" to "{element_type}" |
| 298 |
And I press "bim.add_occurrence" |
| 299 |
And the object "IfcBeam/Beam" is selected |
| 300 |
And the cursor is at "2,0,0" |
| 301 |
When I press "bim.hotkey(hotkey='S_E')" |
| 302 |
Then the object "IfcBeam/Beam" dimensions are "0.1,0.2,2" |
| 303 |
And the object "IfcBeam/Beam" bottom left corner is at "0,-0.05,-0.1" |
| 304 |
|
| 305 |
Scenario: Extend one beam to another |
| 306 |
Given an empty IFC project |
| 307 |
And I load the demo construction library |
| 308 |
And I set "scene.BIMModelProperties.ifc_class" to "IfcBeamType" |
| 309 |
And the variable "element_type" is "[e for e in {ifc}.by_type('IfcBeamType') if e.Name == 'B1'][0].id()" |
| 310 |
And I set "scene.BIMModelProperties.relating_type_id" to "{element_type}" |
| 311 |
And I press "bim.add_occurrence" |
| 312 |
And the cursor is at "1,1,0" |
| 313 |
And I press "bim.add_occurrence" |
| 314 |
And the object "IfcBeam/Beam.001" is selected |
| 315 |
And I press "bim.hotkey(hotkey='S_R')" |
| 316 |
And the object "IfcBeam/Beam.001" is selected |
| 317 |
And additionally the object "IfcBeam/Beam" is selected |
| 318 |
When I press "bim.hotkey(hotkey='S_E')" |
| 319 |
Then the object "IfcBeam/Beam" dimensions are "0.1,0.2,3" |
| 320 |
And the object "IfcBeam/Beam" bottom left corner is at "0,-0.05,-0.1" |
| 321 |
And the object "IfcBeam/Beam" top right corner is at "3,0.05,0.1" |
| 322 |
And the object "IfcBeam/Beam.001" dimensions are "0.1,0.2,3.95" |
| 323 |
And the object "IfcBeam/Beam.001" bottom left corner is at "1.05,0.05,-0.1" |
| 324 |
And the object "IfcBeam/Beam.001" top right corner is at "0.95,4,0.1" |
| 325 |
|
| 326 |
Scenario: Join two beams with a butt joint - first beam has priority |
| 327 |
Given an empty IFC project |
| 328 |
And I load the demo construction library |
| 329 |
And I set "scene.BIMModelProperties.ifc_class" to "IfcBeamType" |
| 330 |
And the variable "element_type" is "[e for e in {ifc}.by_type('IfcBeamType') if e.Name == 'B1'][0].id()" |
| 331 |
And I set "scene.BIMModelProperties.relating_type_id" to "{element_type}" |
| 332 |
And I press "bim.add_occurrence" |
| 333 |
And the cursor is at "1,1,0" |
| 334 |
And I press "bim.add_occurrence" |
| 335 |
And the object "IfcBeam/Beam.001" is selected |
| 336 |
And I press "bim.hotkey(hotkey='S_R')" |
| 337 |
And the object "IfcBeam/Beam.001" is selected |
| 338 |
And additionally the object "IfcBeam/Beam" is selected |
| 339 |
When I press "bim.hotkey(hotkey='S_T')" |
| 340 |
Then the object "IfcBeam/Beam" dimensions are "0.1,0.2,1.95" |
| 341 |
And the object "IfcBeam/Beam" bottom left corner is at "1.05,-0.05,-0.1" |
| 342 |
And the object "IfcBeam/Beam" top right corner is at "3,0.05,0.1" |
| 343 |
And the object "IfcBeam/Beam.001" dimensions are "0.1,0.2,4.05" |
| 344 |
And the object "IfcBeam/Beam.001" bottom left corner is at "1.05,-0.05,-0.1" |
| 345 |
And the object "IfcBeam/Beam.001" top right corner is at "0.95,4,0.1" |
| 346 |
|
| 347 |
Scenario: Join two beams with a butt joint - second beam has priority |
| 348 |
Given an empty IFC project |
| 349 |
And I load the demo construction library |
| 350 |
And I set "scene.BIMModelProperties.ifc_class" to "IfcBeamType" |
| 351 |
And the variable "element_type" is "[e for e in {ifc}.by_type('IfcBeamType') if e.Name == 'B1'][0].id()" |
| 352 |
And I set "scene.BIMModelProperties.relating_type_id" to "{element_type}" |
| 353 |
And I press "bim.add_occurrence" |
| 354 |
And the cursor is at "1,1,0" |
| 355 |
And I press "bim.add_occurrence" |
| 356 |
And the object "IfcBeam/Beam.001" is selected |
| 357 |
And I press "bim.hotkey(hotkey='S_R')" |
| 358 |
And the object "IfcBeam/Beam" is selected |
| 359 |
And additionally the object "IfcBeam/Beam.001" is selected |
| 360 |
When I press "bim.hotkey(hotkey='S_T')" |
| 361 |
Then the object "IfcBeam/Beam" dimensions are "0.1,0.2,2.05" |
| 362 |
And the object "IfcBeam/Beam" bottom left corner is at "0.95,-0.05,-0.1" |
| 363 |
And the object "IfcBeam/Beam" top right corner is at "3,0.05,0.1" |
| 364 |
And the object "IfcBeam/Beam.001" dimensions are "0.1,0.2,3.95" |
| 365 |
And the object "IfcBeam/Beam.001" bottom left corner is at "1.05,0.05,-0.1" |
| 366 |
And the object "IfcBeam/Beam.001" top right corner is at "0.95,4,0.1" |
| 367 |
|
| 368 |
Scenario: Join two beams with a mitre joint |
| 369 |
Given an empty IFC project |
| 370 |
And I load the demo construction library |
| 371 |
And I set "scene.BIMModelProperties.ifc_class" to "IfcBeamType" |
| 372 |
And the variable "element_type" is "[e for e in {ifc}.by_type('IfcBeamType') if e.Name == 'B1'][0].id()" |
| 373 |
And I set "scene.BIMModelProperties.relating_type_id" to "{element_type}" |
| 374 |
And I press "bim.add_occurrence" |
| 375 |
And the cursor is at "1,1,0" |
| 376 |
And I press "bim.add_occurrence" |
| 377 |
And the object "IfcBeam/Beam.001" is selected |
| 378 |
And I press "bim.hotkey(hotkey='S_R')" |
| 379 |
And the object "IfcBeam/Beam" is selected |
| 380 |
And additionally the object "IfcBeam/Beam.001" is selected |
| 381 |
When I press "bim.hotkey(hotkey='S_Y')" |
| 382 |
Then the object "IfcBeam/Beam" dimensions are "0.1,0.2,2.05" |
| 383 |
And the object "IfcBeam/Beam" bottom left corner is at "0.95,-0.05,-0.1" |
| 384 |
And the object "IfcBeam/Beam" top right corner is at "3,0.05,0.1" |
| 385 |
And the object "IfcBeam/Beam.001" dimensions are "0.1,0.2,4.05" |
| 386 |
And the object "IfcBeam/Beam.001" bottom left corner is at "1.05,-0.05,-0.1" |
| 387 |
And the object "IfcBeam/Beam.001" top right corner is at "0.95,4,0.1" |
| 388 |
|
| 389 |
Scenario: Change the length of a beam |
| 390 |
Given an empty IFC project |
| 391 |
And I load the demo construction library |
| 392 |
And I set "scene.BIMModelProperties.ifc_class" to "IfcBeamType" |
| 393 |
And the variable "element_type" is "[e for e in {ifc}.by_type('IfcBeamType') if e.Name == 'B1'][0].id()" |
| 394 |
And I set "scene.BIMModelProperties.relating_type_id" to "{element_type}" |
| 395 |
And I press "bim.add_occurrence" |
| 396 |
And the object "IfcBeam/Beam" is selected |
| 397 |
And I set "scene.BIMModelProperties.extrusion_depth" to "2.0" |
| 398 |
When I press "bim.change_profile_depth(depth=2.0)" |
| 399 |
Then the object "IfcBeam/Beam" dimensions are "0.1,0.2,2" |
| 400 |
|
| 401 |
Scenario: Rotate a beam by 90 degrees |
| 402 |
Given an empty IFC project |
| 403 |
And I load the demo construction library |
| 404 |
And I set "scene.BIMModelProperties.ifc_class" to "IfcBeamType" |
| 405 |
And the variable "element_type" is "[e for e in {ifc}.by_type('IfcBeamType') if e.Name == 'B1'][0].id()" |
| 406 |
And I set "scene.BIMModelProperties.relating_type_id" to "{element_type}" |
| 407 |
And I press "bim.add_occurrence" |
| 408 |
And the object "IfcBeam/Beam" is selected |
| 409 |
When I press "bim.hotkey(hotkey='S_R')" |
| 410 |
Then the object "IfcBeam/Beam" dimensions are "0.1,0.2,3" |
| 411 |
And the object "IfcBeam/Beam" bottom left corner is at "0.05,0,-0.1" |
| 412 |
And the object "IfcBeam/Beam" top right corner is at "-0.05,3,0.1" |
| 413 |
|
| 414 |
Scenario: Regenerate a beam - after doing nothing interesting |
| 415 |
Given an empty IFC project |
| 416 |
And I load the demo construction library |
| 417 |
And I set "scene.BIMModelProperties.ifc_class" to "IfcBeamType" |
| 418 |
And the variable "element_type" is "[e for e in {ifc}.by_type('IfcBeamType') if e.Name == 'B1'][0].id()" |
| 419 |
And I set "scene.BIMModelProperties.relating_type_id" to "{element_type}" |
| 420 |
And I press "bim.add_occurrence" |
| 421 |
And the object "IfcBeam/Beam" is selected |
| 422 |
When I press "bim.hotkey(hotkey='S_G')" |
| 423 |
Then the object "IfcBeam/Beam" dimensions are "0.1,0.2,3" |
| 424 |
And the object "IfcBeam/Beam" bottom left corner is at "0,-0.05,-0.1" |
| 425 |
And the object "IfcBeam/Beam" top right corner is at "3,0.05,0.1" |
| 426 |
|
| 427 |
Scenario: Undo test - create a wall and couple windows and undo the last window |
| 428 |
Given an empty IFC project |
| 429 |
And I load the demo construction library |
| 430 |
And I set "scene.BIMModelProperties.ifc_class" to "IfcWallType" |
| 431 |
And I press "bim.add_occurrence" |
| 432 |
And I set "scene.BIMModelProperties.ifc_class" to "IfcWindowType" |
| 433 |
And I press "bim.add_occurrence" |
| 434 |
And I prepare to undo |
| 435 |
And the object "IfcWall/Wall" is selected |
| 436 |
And I set "scene.BIMModelProperties.ifc_class" to "IfcWindowType" |
| 437 |
And I press "bim.add_occurrence" |
| 438 |
And I undo |
| 439 |
Then nothing happens |
| 440 |
|
| 441 |
Scenario: Undo test - create a wall with window opening, flip it and undo |
| 442 |
Given an empty IFC project |
| 443 |
And I load the demo construction library |
| 444 |
And I set "scene.BIMModelProperties.ifc_class" to "IfcWallType" |
| 445 |
And I press "bim.add_occurrence" |
| 446 |
And I set "scene.BIMModelProperties.ifc_class" to "IfcWindowType" |
| 447 |
And I press "bim.add_occurrence" |
| 448 |
And the object "IfcWall/Wall" is selected |
| 449 |
And I prepare to undo |
| 450 |
And I press "bim.hotkey(hotkey='S_F')" |
| 451 |
And I undo |
| 452 |
Then nothing happens |
| 453 |
|
| 454 |
Scenario: Create window type based on window modifier, add an occurrence of it and edit it |
| 455 |
Given an empty IFC project |
| 456 |
And I trigger "Add Element" |
| 457 |
And I set the "Class" property to "IfcWindowType" |
| 458 |
And I set the "Predefined Type" property to "WINDOW" |
| 459 |
And I set the "Representation" property to "Window" |
| 460 |
When I click "OK" |
| 461 |
And I press "bim.add_occurrence" |
| 462 |
And I press "bim.enable_editing_window()" |
| 463 |
And I press "bim.finish_editing_window()" |
| 464 |
Then nothing happens |
| 465 |
|
| 466 |
Scenario: Create door type based on door modifier, add an occurrence of it and edit it |
| 467 |
Given an empty IFC project |
| 468 |
And I trigger "Add Element" |
| 469 |
And I set the "Class" property to "IfcDoorType" |
| 470 |
And I set the "Predefined Type" property to "DOOR" |
| 471 |
And I set the "Representation" property to "Door" |
| 472 |
When I click "OK" |
| 473 |
And I press "bim.add_occurrence" |
| 474 |
And I press "bim.enable_editing_door()" |
| 475 |
And I press "bim.finish_editing_door()" |
| 476 |
Then nothing happens |
| 477 |
|
| 478 |
Scenario: Create a door, undo and create a new door |
| 479 |
Given an empty IFC project |
| 480 |
And I prepare to undo |
| 481 |
And I press "mesh.add_door()" |
| 482 |
And I undo |
| 483 |
And I press "mesh.add_door()" |
| 484 |
Then nothing happens |
| 485 |
And the object "IfcDoor/IfcDoor" exists |
| 486 |
|
| 487 |
Scenario: Create a MEP transition |
| 488 |
Given an empty IFC project |
| 489 |
And I create default MEP types |
| 490 |
And the variable "segment_types" is "[str(e.id()) for e in {ifc}.by_type('IfcDuctSegmentType')]" |
| 491 |
|
| 492 |
And I set "scene.BIMModelProperties.ifc_class" to "IfcDuctSegmentType" |
| 493 |
And I set "scene.BIMModelProperties.relating_type_id" to "{segment_types}[0]" |
| 494 |
And I press "bim.add_occurrence" |
| 495 |
And I rename the object "IfcDuctSegment/DuctSegment" to "IfcDuctSegment/RectSegment" |
| 496 |
|
| 497 |
And I set "scene.BIMModelProperties.relating_type_id" to "{segment_types}[1]" |
| 498 |
And I press "bim.add_occurrence" |
| 499 |
And I rename the object "IfcDuctSegment/DuctSegment" to "IfcDuctSegment/CircleSegment" |
| 500 |
|
| 501 |
And the object "IfcDuctSegment/RectSegment" is moved to "0,0,0" |
| 502 |
And the object "IfcDuctSegment/CircleSegment" is moved to "2.5,0,0" |
| 503 |
And the object "IfcDuctSegment/CircleSegment" is selected |
| 504 |
And additionally the object "IfcDuctSegment/RectSegment" is selected |
| 505 |
And I press "bim.mep_add_transition" |
| 506 |
|
| 507 |
Then the object "IfcDuctFitting/DuctFitting" exists |
| 508 |
And the object "IfcDuctFittingType/Transition" exists |
| 509 |
And the object "IfcDuctSegment/RectSegment" is at "0,0,0" |
| 510 |
And the object "IfcDuctSegment/RectSegment" dimensions are "0.4,0.2,2.370096" |
| 511 |
And the object "IfcDuctSegment/CircleSegment" is at "3.1299,0,0" |
| 512 |
And the object "IfcDuctSegment/CircleSegment" dimensions are "0.1000, 0.09927, 2.370096" |
| 513 |
And the object "IfcDuctFitting/DuctFitting" is at "2.370096, 0.0000, 0.0000" |
| 514 |
And the object "IfcDuctFitting/DuctFitting" dimensions are "0.4000, 0.2000, 0.759807" |
| 515 |
|
| 516 |
Scenario: Create a MEP bend between intersecting with different locations |
| 517 |
Given an empty IFC project |
| 518 |
And I create default MEP types |
| 519 |
And the variable "segment_types" is "[str(e.id()) for e in {ifc}.by_type('IfcDuctSegmentType')]" |
| 520 |
|
| 521 |
And I set "scene.BIMModelProperties.ifc_class" to "IfcDuctSegmentType" |
| 522 |
And I set "scene.BIMModelProperties.relating_type_id" to "{segment_types}[0]" |
| 523 |
And I set "scene.BIMModelProperties.extrusion_depth" to "5.0" |
| 524 |
And I press "bim.add_occurrence" |
| 525 |
And I rename the object "IfcDuctSegment/DuctSegment" to "IfcDuctSegment/Seg1" |
| 526 |
|
| 527 |
And I set "scene.BIMModelProperties.relating_type_id" to "{segment_types}[0]" |
| 528 |
And I press "bim.add_occurrence" |
| 529 |
And I rename the object "IfcDuctSegment/DuctSegment" to "IfcDuctSegment/Seg2" |
| 530 |
And the object "IfcDuctSegment/Seg2" is rotated by "0,0,90" deg |
| 531 |
|
| 532 |
And the object "IfcDuctSegment/Seg2" is moved to "6,1,1" |
| 533 |
And the object "IfcDuctSegment/Seg1" is selected |
| 534 |
And additionally the object "IfcDuctSegment/Seg2" is selected |
| 535 |
And I press "bim.mep_add_bend" |
| 536 |
|
| 537 |
Then the object "IfcDuctFitting/DuctFitting" exists |
| 538 |
And the object "IfcDuctFittingType/Bend" exists |
| 539 |
And the object "IfcDuctSegment/Seg1" is at "0,0,1.0" |
| 540 |
And the object "IfcDuctSegment/Seg1" dimensions are "0.4,0.2,5.5" |
| 541 |
And the object "IfcDuctSegment/Seg2" is at "6.0,0.5,1.0" |
| 542 |
And the object "IfcDuctSegment/Seg2" dimensions are "0.4,0.2,5.5" |
| 543 |
And the object "IfcDuctFitting/DuctFitting" is at "6.0, 0.5, 1.0" |
| 544 |
And the object "IfcDuctFitting/DuctFitting" dimensions are "0.7, 0.2, 0.7" |
| 545 |
|
| 546 |
Scenario: Create a MEP bend between intersecting segments at the same location |
| 547 |
Given an empty IFC project |
| 548 |
And I create default MEP types |
| 549 |
And the variable "segment_types" is "[str(e.id()) for e in {ifc}.by_type('IfcDuctSegmentType')]" |
| 550 |
|
| 551 |
And I set "scene.BIMModelProperties.ifc_class" to "IfcDuctSegmentType" |
| 552 |
And I set "scene.BIMModelProperties.relating_type_id" to "{segment_types}[0]" |
| 553 |
And I set "scene.BIMModelProperties.extrusion_depth" to "5.0" |
| 554 |
And I press "bim.add_occurrence" |
| 555 |
And I rename the object "IfcDuctSegment/DuctSegment" to "IfcDuctSegment/Seg1" |
| 556 |
|
| 557 |
And I set "scene.BIMModelProperties.relating_type_id" to "{segment_types}[0]" |
| 558 |
And I press "bim.add_occurrence" |
| 559 |
And I rename the object "IfcDuctSegment/DuctSegment" to "IfcDuctSegment/Seg2" |
| 560 |
And the object "IfcDuctSegment/Seg2" is rotated by "0,0,90" deg |
| 561 |
|
| 562 |
And the object "IfcDuctSegment/Seg1" is selected |
| 563 |
And additionally the object "IfcDuctSegment/Seg2" is selected |
| 564 |
And I press "bim.mep_add_bend" |
| 565 |
|
| 566 |
Then the object "IfcDuctFitting/DuctFitting" exists |
| 567 |
And the object "IfcDuctFittingType/Bend" exists |
| 568 |
And the object "IfcDuctSegment/Seg1" is at "0.5,0,1.0" |
| 569 |
And the object "IfcDuctSegment/Seg1" dimensions are "0.4,0.2,4.5" |
| 570 |
And the object "IfcDuctSegment/Seg2" is at "0.0,0.5,1.0" |
| 571 |
And the object "IfcDuctSegment/Seg2" dimensions are "0.4,0.2,4.5" |
| 572 |
And the object "IfcDuctFitting/DuctFitting" is at "0.0, 0.5, 1.0" |
| 573 |
And the object "IfcDuctFitting/DuctFitting" dimensions are "0.7, 0.2, 0.7" |