| 1 |
From [email protected] Wed Jul 1 13:17:17 1998 |
| 2 |
Received: from aleve.media.mit.edu by hub.media.mit.edu; (5.65v3.2/1.1/06Jun95-8.2MPM) |
| 3 |
id AA10324; Wed, 1 Jul 1998 13:17:17 -0400 |
| 4 |
Received: from comp.uark.edu ([email protected] [130.184.252.197]) |
| 5 |
by aleve.media.mit.edu (8.8.7/ML970927) with ESMTP id LAA00083 |
| 6 |
for <[email protected]>; Wed, 1 Jul 1998 11:56:44 -0400 (EDT) |
| 7 |
Received: from comp.uark.edu (IDENT:[email protected] [130.184.201.233]) |
| 8 |
by comp.uark.edu (8.9.0/8.9.0) with ESMTP id KAA12202; |
| 9 |
Wed, 1 Jul 1998 10:56:30 -0500 (CDT) |
| 10 |
Sender: [email protected] |
| 11 |
Message-Id: <[email protected]> |
| 12 |
Date: Wed, 01 Jul 1998 10:56:30 -0500 |
| 13 |
From: Douglas Blank <[email protected]> |
| 14 |
Organization: University of Arkansas, CS |
| 15 |
X-Mailer: Mozilla 4.04 [en] (X11; I; Linux 2.0.33 i686) |
| 16 |
Mime-Version: 1.0 |
| 17 |
To: Aaron Edsinger <[email protected]> |
| 18 |
Cc: handy <[email protected]> |
| 19 |
Subject: Re: Serial Interface |
| 20 |
References: <[email protected]> |
| 21 |
Content-Type: text/plain; charset=us-ascii |
| 22 |
Content-Transfer-Encoding: 7bit |
| 23 |
|
| 24 |
Aaron Edsinger wrote: |
| 25 |
|
| 26 |
> Hello, |
| 27 |
> I've been having some problems using my HandyBoard to talk directly to my |
| 28 |
> PC via the serial interface. I disable Interactive C and then Poke() and |
| 29 |
> Peek() as has been described on this list. I send short character strings |
| 30 |
> from my PC to the HandyBoard under Windows 95. If I send strings longer |
| 31 |
> than 2 characters, it seems that some of the characters get lost. This |
| 32 |
> behavior seems to be affected by repositioning or slightly modifying the |
| 33 |
> code, suggesting perhaps a timing issue. |
| 34 |
|
| 35 |
Although there is the HEXMON program, I too, have been trying to do what |
| 36 |
you describe, and encountered the same problems. I found it to be a |
| 37 |
timing issue, and, through trial and error, have a found some settings |
| 38 |
that seem to work most of the time. |
| 39 |
|
| 40 |
My goal was to make C code that looked the same when compiled and run on |
| 41 |
the Host is the code that ran under IC. |
| 42 |
|
| 43 |
I am including the host and HB programs here. If anyone knows of a |
| 44 |
better way of communicating, please let us know. |
| 45 |
|
| 46 |
-Doug Blank |
| 47 |
|
| 48 |
===================================================================== |
| 49 |
[email protected] Douglas Blank, University of Arkansas |
| 50 |
Assistant Professor Computer Science |
| 51 |
==================== http://www.uark.edu/~dblank ==================== |
| 52 |
|
| 53 |
This code was written for MS C++4.0 running on Win95. |
| 54 |
|
| 55 |
//************** BEGIN: serial_HOST.c |
| 56 |
|
| 57 |
/* VC++4.0 HandyBoard Host Programming System |
| 58 |
Dr. Douglas S. Blank |
| 59 |
University of Arkansas, Department of Computer Science |
| 60 |
www.uark.edu/~dblank |
| 61 |
|
| 62 |
This code runs on a host PC. |
| 63 |
*/ |
| 64 |
|
| 65 |
#include <ctype.h> |
| 66 |
#include <conio.h> |
| 67 |
#include <stdlib.h> |
| 68 |
#include <stdio.h> |
| 69 |
|
| 70 |
#include "serial_HOST.h" |
| 71 |
|
| 72 |
void main(int argc, char *argv[]) |
| 73 |
{ |
| 74 |
motor(0, 100); |
| 75 |
motor(1, 100); |
| 76 |
motor(2, 100); |
| 77 |
motor(3, 100); |
| 78 |
sleep(1000); |
| 79 |
motor(0, -100); |
| 80 |
motor(1, -100); |
| 81 |
motor(2, -100); |
| 82 |
motor(3, -100); |
| 83 |
sleep(1000); |
| 84 |
ao(); |
| 85 |
print("\nThis is a test"); |
| 86 |
printf("Knob is %d\n", knob() ); |
| 87 |
printf("Analog(0) is %d\n", analog(0)); |
| 88 |
printf("Digital(0) is %d\n", digital(0)); |
| 89 |
printf("Analog(1) is %d\n", analog(1)); |
| 90 |
printf("Digital(1) is %d\n", digital(1)); |
| 91 |
printf("Analog(2) is %d\n", analog(2)); |
| 92 |
printf("Digital(2) is %d\n", digital(2)); |
| 93 |
printf("Analog(3) is %d\n", analog(3)); |
| 94 |
printf("Digital(3) is %d\n", digital(3)); |
| 95 |
printf("Analog(4) is %d\n", analog(4)); |
| 96 |
printf("Digital(4) is %d\n", digital(4)); |
| 97 |
printf("Analog(5) is %d\n", analog(5)); |
| 98 |
printf("Digital(5) is %d\n", digital(5)); |
| 99 |
printf("Analog(6) is %d\n", analog(6)); |
| 100 |
printf("Digital(6) is %d\n", digital(6)); |
| 101 |
printf("Analog(7) is %d\n", analog(7)); |
| 102 |
printf("Digital(7) is %d\n", digital(7)); |
| 103 |
printf("Analog(8) is %d\n", analog(8)); |
| 104 |
printf("Digital(8) is %d\n", digital(8)); |
| 105 |
printf("Analog(9) is %d\n", analog(9)); |
| 106 |
printf("Digital(9) is %d\n", digital(9)); |
| 107 |
printf("Analog(10) is %d\n", analog(10)); |
| 108 |
printf("Digital(10) is %d\n", digital(10)); |
| 109 |
printf("Analog(11) is %d\n", analog(11)); |
| 110 |
printf("Digital(11) is %d\n", digital(11)); |
| 111 |
printf("Analog(12) is %d\n", analog(12)); |
| 112 |
printf("Digital(12) is %d\n", digital(12)); |
| 113 |
printf("Analog(13) is %d\n", analog(13)); |
| 114 |
printf("Digital(13) is %d\n", digital(13)); |
| 115 |
printf("Analog(14) is %d\n", analog(14)); |
| 116 |
printf("Digital(14) is %d\n", digital(14)); |
| 117 |
printf("Analog(15) is %d\n", analog(15)); |
| 118 |
printf("Digital(15) is %d\n", digital(15)); |
| 119 |
beep(); |
| 120 |
sleep(1000); |
| 121 |
while (! stop_button() ) { |
| 122 |
sprintf(buffer, "%d.0", (knob() * 10)); |
| 123 |
tone( buffer, "0.1"); |
| 124 |
} |
| 125 |
} |
| 126 |
|
| 127 |
//************** END: serial_HOST.c |
| 128 |
|
| 129 |
//************** BEGIN: serial_HOST.h |
| 130 |
|
| 131 |
/* VC++4.0 HandyBoard Host Programming System |
| 132 |
Dr. Douglas S. Blank |
| 133 |
University of Arkansas, Department of Computer Science |
| 134 |
www.uark.edu/~dblank |
| 135 |
*/ |
| 136 |
|
| 137 |
#define MOTOR 0 |
| 138 |
#define AO 1 |
| 139 |
#define ANALOG 2 |
| 140 |
#define DIGITAL 3 |
| 141 |
#define PRINTF 4 |
| 142 |
#define KNOB 5 |
| 143 |
#define BEEP 6 |
| 144 |
#define TONE 7 |
| 145 |
#define START_BUTTON 8 |
| 146 |
#define STOP_BUTTON 9 |
| 147 |
#define QUIT 113 |
| 148 |
|
| 149 |
#define sleep(NUM) _sleep(NUM) |
| 150 |
#define SERIALWAIT 5 |
| 151 |
|
| 152 |
unsigned short PORT = 0x3f8; // LPT1: 0x378 COM1: 0x3f8 |
| 153 |
|
| 154 |
int send(int i) { |
| 155 |
int retval; |
| 156 |
retval = _outp( PORT, i); |
| 157 |
_sleep(SERIALWAIT); |
| 158 |
return retval; |
| 159 |
} |
| 160 |
|
| 161 |
int receive() { |
| 162 |
int retval; |
| 163 |
retval = _inp( PORT); |
| 164 |
_sleep(SERIALWAIT); |
| 165 |
retval = _inp( PORT); |
| 166 |
return retval; |
| 167 |
} |
| 168 |
|
| 169 |
void hangup() { |
| 170 |
send(QUIT); |
| 171 |
} |
| 172 |
|
| 173 |
void print(char buffer[]) { |
| 174 |
int i; |
| 175 |
send(PRINTF); |
| 176 |
for (i = 0; buffer[i] != 0; i++) |
| 177 |
send(buffer[i]); |
| 178 |
send('\0'); |
| 179 |
} |
| 180 |
|
| 181 |
void motor(int motornum, int power) { |
| 182 |
send(MOTOR); |
| 183 |
send(motornum); |
| 184 |
send(power + 100); // taken off on the other end |
| 185 |
} |
| 186 |
|
| 187 |
int analog(int sensor) { |
| 188 |
send(ANALOG); |
| 189 |
send(sensor); |
| 190 |
return receive(); |
| 191 |
} |
| 192 |
|
| 193 |
int digital(int sensor) { |
| 194 |
send(DIGITAL); |
| 195 |
send(sensor); |
| 196 |
return receive(); |
| 197 |
} |
| 198 |
|
| 199 |
void ao() { |
| 200 |
send(AO); |
| 201 |
} |
| 202 |
|
| 203 |
int knob() { |
| 204 |
send(KNOB); |
| 205 |
return receive(); |
| 206 |
} |
| 207 |
|
| 208 |
void beep() { |
| 209 |
send(BEEP); |
| 210 |
} |
| 211 |
|
| 212 |
void tone(char f1[], char f2[]) { |
| 213 |
int i; |
| 214 |
send(TONE); |
| 215 |
for (i = 0; f1[i] != 0; i++) |
| 216 |
send(f1[i]); |
| 217 |
send('\0'); |
| 218 |
for (i = 0; f2[i] != 0; i++) |
| 219 |
send(f2[i]); |
| 220 |
send('\0'); |
| 221 |
_sleep((unsigned long) (atof(f2) * 1000)); // to keep from |
| 222 |
overflowing serial line |
| 223 |
} |
| 224 |
|
| 225 |
void interactive() |
| 226 |
{ |
| 227 |
char c; |
| 228 |
char key = ' '; |
| 229 |
while (key != 'q') { |
| 230 |
key = getch(); |
| 231 |
send(key); |
| 232 |
printf("Sent %c\n", key); |
| 233 |
c = receive(); |
| 234 |
printf("Got %c as a return value\n", c); |
| 235 |
} |
| 236 |
} |
| 237 |
|
| 238 |
int start_button() { |
| 239 |
send(START_BUTTON); |
| 240 |
return receive(); |
| 241 |
} |
| 242 |
|
| 243 |
int stop_button() { |
| 244 |
send(STOP_BUTTON); |
| 245 |
return receive(); |
| 246 |
} |
| 247 |
//************** END: serial_HOST.h |
| 248 |
|
| 249 |
//************** BEGIN: serial_HB.c |
| 250 |
|
| 251 |
/* VC++4.0 HandyBoard Programming System |
| 252 |
(Parts taken from other HB programs) |
| 253 |
Dr. Douglas S. Blank |
| 254 |
University of Arkansas, Department of Computer Science |
| 255 |
www.uark.edu/~dblank |
| 256 |
|
| 257 |
This code runs on the HB |
| 258 |
*/ |
| 259 |
|
| 260 |
#define MOTOR 0 |
| 261 |
#define AO 1 |
| 262 |
#define ANALOG 2 |
| 263 |
#define DIGITAL 3 |
| 264 |
#define PRINTF 4 |
| 265 |
#define KNOB 5 |
| 266 |
#define BEEP 6 |
| 267 |
#define TONE 7 |
| 268 |
#define START_BUTTON 8 |
| 269 |
#define STOP_BUTTON 9 |
| 270 |
#define QUIT 113 |
| 271 |
|
| 272 |
int _isspace(int a) /* returns 1 for space or tab, 0 |
| 273 |
otherwise */ |
| 274 |
/* internal routine used by atof() and |
| 275 |
cgets() */ |
| 276 |
|
| 277 |
{ |
| 278 |
return ((a == 32) || (a == 9)); /* 32 is space, 9 is tab */ |
| 279 |
} |
| 280 |
|
| 281 |
/*****************************************************************************/ |
| 282 |
|
| 283 |
int _isdigit(int a) /* returns 1 if a digit 0-9, 0 otherwise */ |
| 284 |
/* internal routine used by atof() */ |
| 285 |
|
| 286 |
{ |
| 287 |
return ((a >= 48) && (a <= 57)); /* 48 is '0', 57 is '9' */ |
| 288 |
} |
| 289 |
|
| 290 |
float atof(char s[]) /* Convert a string containing a number in |
| 291 |
ASCII */ |
| 292 |
/* form (integer, float, or exponential float) |
| 293 |
to a */ |
| 294 |
/* float. Strips whitespace characters (space |
| 295 |
and */ |
| 296 |
/* tab) from the front of the string, but |
| 297 |
stops */ |
| 298 |
/* parsing at the first (unexpected) |
| 299 |
non-numeric */ |
| 300 |
/* character if the string has garbage at the |
| 301 |
end. */ |
| 302 |
/* This means that " 34.3foo78" translates to |
| 303 |
34.3. */ |
| 304 |
/* Modified from atof() function in the |
| 305 |
standard */ |
| 306 |
/* library of the Hi-Tec C compiler for |
| 307 |
CP/M. */ |
| 308 |
/* Note: all string literals converted to |
| 309 |
decimal */ |
| 310 |
/* form because IC can't deal with string |
| 311 |
literals */ |
| 312 |
/* in math |
| 313 |
calculations. */ |
| 314 |
/* Also note: very ugly code because IC will |
| 315 |
not */ |
| 316 |
/* allow any math operations on pointers! Thus, |
| 317 |
the */ |
| 318 |
/* the number string has to be treated as an |
| 319 |
array! */ |
| 320 |
/* Also also note: no error handling; assumes |
| 321 |
that */ |
| 322 |
/* the string is a valid representation of a |
| 323 |
number! */ |
| 324 |
/* Valid range for exponential-format numbers |
| 325 |
is */ |
| 326 |
/* approximately 2.0e-38 to |
| 327 |
3.4e+38. */ |
| 328 |
|
| 329 |
{ |
| 330 |
int i=0; /* index into string array */ |
| 331 |
int sign=0; /* mantissa sign flag: 0=positive, |
| 332 |
1=negative */ |
| 333 |
int exp0=0; /* mantissa exponent counter */ |
| 334 |
int eexp=0; /* E-form exponent counter */ |
| 335 |
int expsign=0; /* exponent sign flag: 0=positive, |
| 336 |
1=negative */ |
| 337 |
float m=0.0; /* mantissa accumulator */ |
| 338 |
|
| 339 |
/* skip any leading whitespace (space, tab) */ |
| 340 |
while (_isspace(s[i])) |
| 341 |
i++; /* skip it */ |
| 342 |
|
| 343 |
/* check for mantissa sign */ |
| 344 |
if (s[i] == 45) /* 45 is '-' */ |
| 345 |
{ |
| 346 |
sign = 1; /* flag minus sign */ |
| 347 |
i++; /* point to next */ |
| 348 |
} |
| 349 |
else if (s[i] == 43) /* 43 is '+' */ |
| 350 |
i++; /* point to next */ |
| 351 |
|
| 352 |
/* now get all digits up to either a decimal point or an e/E */ |
| 353 |
while (_isdigit(s[i])) |
| 354 |
{ |
| 355 |
m = 10.0*m + (float)(s[i] - 48); /* 48 is '0' */ |
| 356 |
i++; /* point to next */ |
| 357 |
} |
| 358 |
|
| 359 |
/* no more digits, so check for decimal point */ |
| 360 |
if (s[i] == 46) /* 46 is '.' */ |
| 361 |
{ |
| 362 |
i++; /* point to next */ |
| 363 |
/* get all digits after decimal point */ |
| 364 |
while (_isdigit(s[i])) |
| 365 |
{ |
| 366 |
exp0--; |
| 367 |
m = 10.0*m + (float)(s[i] - 48); /* 48 is '0' */ |
| 368 |
i++; /* point to next */ |
| 369 |
} |
| 370 |
} |
| 371 |
|
| 372 |
/* check for e/E exponential form */ |
| 373 |
if ((s[i] == 101) || (s[i] == 69)) /* 101 is 'e', 69 is 'E' */ |
| 374 |
{ |
| 375 |
i++; /* point to next */ |
| 376 |
/* check for exponent sign */ |
| 377 |
if (s[i] == 45) /* 45 is '-' */ |
| 378 |
{ |
| 379 |
expsign = 1; /* flag negative exponent */ |
| 380 |
i++; /* point to next */ |
| 381 |
} |
| 382 |
else if (s[i] == 43) /* 43 is '+' */ |
| 383 |
i++; /* point to next */ |
| 384 |
|
| 385 |
/* now get exponent */ |
| 386 |
while (_isdigit(s[i])) |
| 387 |
{ |
| 388 |
eexp = eexp*10 + s[i] - 48; /* 48 is '0' */ |
| 389 |
i++; /* point to next */ |
| 390 |
} |
| 391 |
|
| 392 |
/* adjust exponent sign */ |
| 393 |
if (expsign) |
| 394 |
eexp = -eexp; /* make it negative */ |
| 395 |
} |
| 396 |
|
| 397 |
/* compute absolute value of final float */ |
| 398 |
exp0 += eexp; |
| 399 |
while (exp0 < 0) /* for negative exponents */ |
| 400 |
{ |
| 401 |
m = m / 10.0; |
| 402 |
exp0++; |
| 403 |
} |
| 404 |
while (exp0 > 0) /* for positive exponents */ |
| 405 |
{ |
| 406 |
m = m * 10.0; |
| 407 |
exp0--; |
| 408 |
} |
| 409 |
|
| 410 |
/* adjust final float sign from mantissa */ |
| 411 |
if (sign) |
| 412 |
return (-m); /* negative */ |
| 413 |
else |
| 414 |
return (m); /* positive */ |
| 415 |
} |
| 416 |
|
| 417 |
void disable_pcode_serial() |
| 418 |
/* necessary to receive characters using serial_getchar */ |
| 419 |
{ |
| 420 |
poke(0x3c, 1); |
| 421 |
} |
| 422 |
|
| 423 |
void reenable_pcode_serial() |
| 424 |
/* necessary for IC to interact with board again */ |
| 425 |
{ |
| 426 |
poke(0x3c, 0); |
| 427 |
} |
| 428 |
|
| 429 |
/* |
| 430 |
====================================================================== |
| 431 |
For sending and receiving single bytes, you can use Randy's IC code: |
| 432 |
*/ |
| 433 |
|
| 434 |
void serial_putchar(int c) |
| 435 |
{ |
| 436 |
while (!(peek(0x102e) & 0x80)); /* wait until serial transmit empty |
| 437 |
*/ |
| 438 |
poke(0x102f, c); /* send character */ |
| 439 |
} |
| 440 |
|
| 441 |
int serial_getchar() |
| 442 |
{ |
| 443 |
while (!(peek(0x102e) & 0x20)); /* wait for received character */ |
| 444 |
return peek(0x102f); |
| 445 |
} |
| 446 |
|
| 447 |
void main(void) { |
| 448 |
int pos, c = ' ', var1, var2; |
| 449 |
float f1, f2; |
| 450 |
char buffer[80]; |
| 451 |
disable_pcode_serial(); |
| 452 |
beep(); |
| 453 |
printf("\nSerial IO Mode!"); |
| 454 |
printf("Listening..."); |
| 455 |
msleep(500L); |
| 456 |
while (c != 'q') { |
| 457 |
c = serial_getchar(); |
| 458 |
/* printf("[%d] ", c); */ |
| 459 |
if (c == MOTOR) { |
| 460 |
var1 = serial_getchar(); |
| 461 |
var2 = serial_getchar() - 100; |
| 462 |
motor(var1, var2); |
| 463 |
} else if (c == AO) { |
| 464 |
ao(); |
| 465 |
} else if (c == ANALOG) { |
| 466 |
var1 = serial_getchar(); |
| 467 |
serial_putchar(analog(var1)); |
| 468 |
} else if (c == DIGITAL) { |
| 469 |
var1 = serial_getchar(); |
| 470 |
serial_putchar(digital(var1)); |
| 471 |
} else if (c == PRINTF) { |
| 472 |
pos = 0; |
| 473 |
while (c != 0) { |
| 474 |
buffer[pos++] = c; |
| 475 |
c = serial_getchar(); |
| 476 |
} |
| 477 |
buffer[pos] = '\0'; |
| 478 |
printf(buffer); |
| 479 |
} else if (c == TONE) { |
| 480 |
pos = 0; |
| 481 |
c = serial_getchar(); |
| 482 |
while (c != 0) { |
| 483 |
buffer[pos++] = c; |
| 484 |
c = serial_getchar(); |
| 485 |
} |
| 486 |
buffer[pos] = '\0'; |
| 487 |
f1 = atof(buffer); |
| 488 |
pos = 0; |
| 489 |
c = serial_getchar(); |
| 490 |
while (c != 0) { |
| 491 |
buffer[pos++] = c; |
| 492 |
c = serial_getchar(); |
| 493 |
} |
| 494 |
buffer[pos] = '\0'; |
| 495 |
f2 = atof(buffer); |
| 496 |
tone(f1, f2); |
| 497 |
} else if (c == START_BUTTON) { |
| 498 |
serial_putchar(start_button()); |
| 499 |
} else if (c == STOP_BUTTON) { |
| 500 |
serial_putchar(stop_button()); |
| 501 |
} else if (c == BEEP) { |
| 502 |
beep(); |
| 503 |
} else if (c == KNOB) { |
| 504 |
serial_putchar(knob()); |
| 505 |
} |
| 506 |
} |
| 507 |
reenable_pcode_serial(); |
| 508 |
printf("\nHB Mode!"); |
| 509 |
} |
| 510 |
|
| 511 |
//************** END: serial_HB.c |
| 512 |
|
| 513 |
From [email protected] Wed Jul 1 02:44:06 1998 |
| 514 |
Received: from aleve.media.mit.edu by hub.media.mit.edu; (5.65v3.2/1.1/06Jun95-8.2MPM) |
| 515 |
id AA22669; Wed, 1 Jul 1998 02:44:06 -0400 |
| 516 |
Received: from mail3.sirius.com (mail3.sirius.com [205.134.253.133]) |
| 517 |
by aleve.media.mit.edu (8.8.7/ML970927) with ESMTP id CAA13214 |
| 518 |
for <[email protected]>; Wed, 1 Jul 1998 02:01:55 -0400 (EDT) |
| 519 |
Received: from edsinger (ppp-asfm03--126.sirius.net [205.134.240.126]) |
| 520 |
by mail3.sirius.com (8.8.7/Sirius-8.8.7-97.08.12) with ESMTP id XAA26862 |
| 521 |
for <[email protected]>; Tue, 30 Jun 1998 23:01:54 -0700 (PDT) |
| 522 |
Message-Id: <[email protected]> |
| 523 |
From: "Aaron Edsinger" <[email protected]> |
| 524 |
To: "handy" <[email protected]> |
| 525 |
Subject: Serial Interface |
| 526 |
Date: Wed, 1 Jul 1998 02:06:39 +0100 |
| 527 |
X-Msmail-Priority: Normal |
| 528 |
X-Priority: 3 |
| 529 |
X-Mailer: Microsoft Internet Mail 4.70.1162 |
| 530 |
Mime-Version: 1.0 |
| 531 |
Content-Type: text/plain; charset=ISO-8859-1 |
| 532 |
Content-Transfer-Encoding: 7bit |
| 533 |
|
| 534 |
Hello, |
| 535 |
I've been having some problems using my HandyBoard to talk directly to my |
| 536 |
PC via the serial interface. I disable Interactive C and then Poke() and |
| 537 |
Peek() as has been described on this list. I send short character strings |
| 538 |
from my PC to the HandyBoard under Windows 95. If I send strings longer |
| 539 |
than 2 characters, it seems that some of the characters get lost. This |
| 540 |
behavior seems to be affected by repositioning or slightly modifying the |
| 541 |
code, suggesting perhaps a timing issue. |
| 542 |
|
| 543 |
Why might this be? Is there any way to check for an error situation? |
| 544 |
|
| 545 |
Thanks for any help, |
| 546 |
Aaron |
| 547 |
From [email protected] Thu Jul 16 03:13:49 1998 |
| 548 |
Received: from aleve.media.mit.edu by hub.media.mit.edu; (5.65v3.2/1.1/06Jun95-8.2MPM) |
| 549 |
id AA23518; Thu, 16 Jul 1998 03:13:49 -0400 |
| 550 |
Received: from hq.freegate.com ([208.226.86.1]) |
| 551 |
by aleve.media.mit.edu (8.8.7/ML970927) with SMTP id CAA18991 |
| 552 |
for <[email protected]>; Thu, 16 Jul 1998 02:17:47 -0400 (EDT) |
| 553 |
Received: (qmail+freegate 6968 invoked by alias); 16 Jul 1998 06:17:38 -0000 |
| 554 |
Received: from dialip-04.hq.freegate.com (HELO freegate.com) (208.226.86.222) |
| 555 |
by hq.freegate.com with SMTP; 16 Jul 1998 06:17:38 -0000 |
| 556 |
Message-Id: <[email protected]> |
| 557 |
Date: Wed, 15 Jul 1998 23:21:14 -0700 |
| 558 |
From: Chuck McManis <[email protected]> |
| 559 |
Reply-To: [email protected] |
| 560 |
Organization: Freegate Corporation |
| 561 |
X-Mailer: Mozilla 4.04 [en] (Win95; I) |
| 562 |
Mime-Version: 1.0 |
| 563 |
To: David Rye <[email protected]> |
| 564 |
Cc: [email protected] |
| 565 |
Subject: Re: Handyboard/RWP without p-code |
| 566 |
References: <[email protected]> |
| 567 |
Content-Type: text/plain; charset=us-ascii |
| 568 |
Content-Transfer-Encoding: 7bit |
| 569 |
|
| 570 |
Get a copy of icc11 v5.0 or later (from www.imagecraft.com) and use the |
| 571 |
handyboard library from their site. |
| 572 |
|
| 573 |
--Chuck |
| 574 |
|
| 575 |
From [email protected] Thu Jul 16 03:42:38 1998 |
| 576 |
Received: from aleve.media.mit.edu by hub.media.mit.edu; (5.65v3.2/1.1/06Jun95-8.2MPM) |
| 577 |
id AA24945; Thu, 16 Jul 1998 03:42:38 -0400 |
| 578 |
Received: from mercury.Sun.COM (mercury.Sun.COM [192.9.25.1]) |
| 579 |
by aleve.media.mit.edu (8.8.7/ML970927) with SMTP id CAA07415 |
| 580 |
for <[email protected]>; Thu, 16 Jul 1998 02:44:58 -0400 (EDT) |
| 581 |
Received: from Aus.Sun.COM ([129.158.80.6]) by mercury.Sun.COM (SMI-8.6/mail.byaddr) with SMTP id XAA29734; Wed, 15 Jul 1998 23:44:52 -0700 |
| 582 |
Received: from war.Aus.Sun.COM by Aus.Sun.COM id QAA03011 |
| 583 |
(SMI-8.6/SMI-4.1 for <>); Thu, 16 Jul 1998 16:44:50 +1000 |
| 584 |
Received: from drone by war.Aus.Sun.COM (SMI-8.6/SMI-SVR4) |
| 585 |
id QAA10921; Thu, 16 Jul 1998 16:44:20 +1000 |
| 586 |
Message-Id: <[email protected]> |
| 587 |
Date: Thu, 16 Jul 1998 16:41:56 +1000 (EST) |
| 588 |
From: Scott Seaton - Systems Consultant - ESG <[email protected]> |
| 589 |
Reply-To: Scott Seaton - Systems Consultant - ESG <[email protected]> |
| 590 |
Subject: Re: Handyboard/RWP without p-code |
| 591 |
To: [email protected], [email protected] |
| 592 |
Mime-Version: 1.0 |
| 593 |
Content-Type: MULTIPART/mixed; BOUNDARY=Troop_of_Baboons_752_000 |
| 594 |
X-Mailer: dtmail 1.2.0 CDE Version 1.2 SunOS 5.6 sun4u sparc |
| 595 |
|
| 596 |
--Troop_of_Baboons_752_000 |
| 597 |
Content-Type: TEXT/plain; charset=us-ascii |
| 598 |
Content-MD5: i/HKSIa/Vk0mZT5ml+q21A== |
| 599 |
|
| 600 |
Hi |
| 601 |
|
| 602 |
I suggest that you contact ImageCraft. |
| 603 |
http://www.imagecraft.com/software/index.html or [email protected] |
| 604 |
|
| 605 |
They have a C compiler for 68HC11 CPU's that will do what you want, including a |
| 606 |
library for the HandyBoard (see attached e-mail) ! |
| 607 |
|
| 608 |
I have no affiliation with ImageCraft (other than as a satisfied customer). |
| 609 |
|
| 610 |
Hope this helps |
| 611 |
Scott |
| 612 |
============================================================================== |
| 613 |
,-_|\ Scott Seaton - Sun Enterprise Services - Systems Consultant |
| 614 |
/ \ Sun Microsystems Australia Pty Ltd E-mail : [email protected] |
| 615 |
\_,-\_+ 828 Pacific Highway Phone : +61 2 9844 5381 |
| 616 |
v Gordon, N.S.W., 2072, AUSTRALIA Fax : +61 2 9844 5161 |
| 617 |
============================================================================== |
| 618 |
|
| 619 |
--Troop_of_Baboons_752_000 |
| 620 |
Content-Type: MESSAGE/rfc822; name=Mailbox |
| 621 |
Content-Description: Mailbox |
| 622 |
|
| 623 |
From [email protected] Fri Jul 10 18:59:26 1998 |
| 624 |
Return-Path: <[email protected]> |
| 625 |
Received: from Aus.Sun.COM by war.Aus.Sun.COM (SMI-8.6/SMI-SVR4) |
| 626 |
id SAA14426; Fri, 10 Jul 1998 18:59:26 +1000 |
| 627 |
Received: from earth.sun.com by Aus.Sun.COM id SAA24238 |
| 628 |
(SMI-8.6/SMI-4.1 for <<[email protected]>>); Fri, 10 Jul 1998 18:59:48 +1000 |
| 629 |
Received: from iisesun.iise.CSIRO.AU (iisesun.iise.csiro.au [130.155.5.44]) |
| 630 |
by earth.sun.com (8.8.8/8.8.8) with SMTP id BAA18609 |
| 631 |
for <[email protected]>; Fri, 10 Jul 1998 01:59:44 -0700 (PDT) |
| 632 |
Received: from lists1.best.com (lists1.best.com [206.86.8.15]) by iisesun.iise.CSIRO.AU (SMI-8.6/8.6.12-IISE-SWA) with ESMTP id SAA25847 for <[email protected]>; Fri, 10 Jul 1998 18:49:31 +1000 |
| 633 |
Received: (from daemon@localhost) by lists1.best.com (8.9.0/8.8.BEST) id BAA15320 for [email protected]; Fri, 10 Jul 1998 01:04:34 -0700 (PDT) |
| 634 |
Message-Id: <[email protected]> |
| 635 |
From: Christina Willrich & Richard Man <[email protected]> |
| 636 |
Subject: icc11 Handyboard library available |
| 637 |
Date: Fri, 10 Jul 1998 00:58:49 -0700 |
| 638 |
BestServHost: lists.best.com |
| 639 |
MIME-Version: 1.0 |
| 640 |
Content-Type: text/plain; charset="us-ascii" |
| 641 |
Sender: [email protected] |
| 642 |
Errors-To: [email protected] |
| 643 |
Reply-To: [email protected] |
| 644 |
To: [email protected] |
| 645 |
content-length: 399 |
| 646 |
Status: RO |
| 647 |
X-Status: $$$$ |
| 648 |
X-UID: 0000000001 |
| 649 |
|
| 650 |
At long last, I dusted off Chuck McManis Handyboard library and ported it |
| 651 |
to V5. No reason why it can't work with V4.5 either ;-) Anyway, to try it |
| 652 |
out, point your browser to |
| 653 |
|
| 654 |
ftp://ftp.imagecraft.com/pub/libhb.zip |
| 655 |
|
| 656 |
Chuck really did a great job with the LCD. There are commands to scroll, |
| 657 |
move etc. Make sure you try the lcdtest2.c test. |
| 658 |
|
| 659 |
// richard |
| 660 |
[email protected] http://www.imagecraft.com |
| 661 |
|
| 662 |
|
| 663 |
--Troop_of_Baboons_752_000-- |
| 664 |
|
| 665 |
From [email protected] Mon Jul 27 18:34:05 1998 |
| 666 |
Received: from aleve.media.mit.edu by hub.media.mit.edu; (5.65v3.2/1.1/06Jun95-8.2MPM) |
| 667 |
id AA00723; Mon, 27 Jul 1998 18:34:05 -0400 |
| 668 |
Received: from theory.phys.vt.edu (theory.phys.vt.edu [128.173.176.33]) |
| 669 |
by aleve.media.mit.edu (8.8.7/ML970927) with ESMTP id RAA19984 |
| 670 |
for <[email protected]>; Mon, 27 Jul 1998 17:22:26 -0400 (EDT) |
| 671 |
Received: from localhost (wallace@localhost) |
| 672 |
by theory.phys.vt.edu (8.8.5/8.8.5) with SMTP id RAA00312 |
| 673 |
for <[email protected]>; Mon, 27 Jul 1998 17:22:24 -0400 (EDT) |
| 674 |
Date: Mon, 27 Jul 1998 17:22:24 -0400 (EDT) |
| 675 |
From: Mark Wallace <[email protected]> |
| 676 |
To: [email protected] |
| 677 |
Subject: sonar.c for the handyboard |
| 678 |
Message-Id: <[email protected]> |
| 679 |
Mime-Version: 1.0 |
| 680 |
Content-Type: TEXT/PLAIN; charset=US-ASCII |
| 681 |
|
| 682 |
Hello, |
| 683 |
I have a handyboard and 6500 series poloroid ultrasonic ranging |
| 684 |
system. I have downloaded the sonar.c programs used to drive the |
| 685 |
transducer for distance measurements. There appears to be a problem, or |
| 686 |
atleast I think there is, with it. The sonar device is supposed to give |
| 687 |
distances of up to 35ft but the TCNC time register is 16 bit and in the |
| 688 |
program it says "if ((peekwork(0x100e)-start_time) < 0)" too much time has |
| 689 |
elapsed and it returns -1. Therefore as soon as about 32700 counts goes |
| 690 |
by, that value will go negative. I believe hex goes from 0 to 32768 then |
| 691 |
-32768 to -1. In this case the difference will be < 0 if the object |
| 692 |
is greater then about 9 ft. I have taken this out of the program and can |
| 693 |
get accurate measurements up to atleast 30 ft but I have to look at the |
| 694 |
value given and add multiples of 2^16 to it to figure out where it is. |
| 695 |
Taking this out of the program also can get you stuck if you really are |
| 696 |
out of range. |
| 697 |
I have looked on the motorola web pages to see about this clock |
| 698 |
and it says that the clock goes till it reachs $ffff and then flags |
| 699 |
somewhere that there is an overflow and then starts over. I don't know |
| 700 |
how to find out were in the chip this information might be stored. I know |
| 701 |
the TCNT time register is at 0x100e from the notes on Simplified Sonar for |
| 702 |
the Handy Board but I don't know where that overflow flag is stored. I |
| 703 |
thought that maybe by setting this flag and using it in the loop you might |
| 704 |
be about to get a greater distance out of you measurement. |
| 705 |
Another question I have is about IC. I would like to display |
| 706 |
numbers greater then 32000 and right now there are several int type |
| 707 |
variables and normal C comands don't seem to work to make a "long" or any |
| 708 |
other type that are larger then 32000. How does IC handle larger numbers? |
| 709 |
I am only a student and don't have much experience with this stuff |
| 710 |
so I would appreciate any feedback I can get on either of these problems. |
| 711 |
Thanks. |
| 712 |
|
| 713 |
Mark Wallace |
| 714 |
|
| 715 |
e-mail [email protected] |
| 716 |
[email protected] |
| 717 |
Web page http://sps1.phys.vt.edu/~mwallace/index.html |
| 718 |
|
| 719 |
"What a waste it would be after 4 billion tortuous years of evolution if |
| 720 |
the dominant organism contrived its own self-destruction" |
| 721 |
Carl Sagan |
| 722 |
|
| 723 |
|
| 724 |
From [email protected] Wed Aug 12 13:42:19 1998 |
| 725 |
Received: from aleve.media.mit.edu by hub.media.mit.edu; (5.65v3.2/1.1/06Jun95-8.2MPM) |
| 726 |
id AA13439; Wed, 12 Aug 1998 13:42:19 -0400 |
| 727 |
Received: from mail3.sirius.com (mail3.sirius.com [205.134.253.133]) |
| 728 |
by aleve.media.mit.edu (8.8.7/ML970927) with ESMTP id MAA10630 |
| 729 |
for <[email protected]>; Wed, 12 Aug 1998 12:48:27 -0400 (EDT) |
| 730 |
Received: from aarone (ppp-asfm05--041.sirius.net [205.134.241.41]) |
| 731 |
by mail3.sirius.com (8.8.7/Sirius-8.8.7-97.08.12) with SMTP id JAA20821; |
| 732 |
Wed, 12 Aug 1998 09:48:24 -0700 (PDT) |
| 733 |
Message-Id: <[email protected]> |
| 734 |
From: "Aaron Edsinger" <[email protected]> |
| 735 |
To: "Mark Wallace" <[email protected]> |
| 736 |
Cc: "handy" <[email protected]> |
| 737 |
Subject: Re: serial library for C++ |
| 738 |
Date: Wed, 12 Aug 1998 12:53:41 -0700 |
| 739 |
Mime-Version: 1.0 |
| 740 |
Content-Type: text/plain; |
| 741 |
charset="iso-8859-1" |
| 742 |
Content-Transfer-Encoding: 7bit |
| 743 |
X-Priority: 3 |
| 744 |
X-Msmail-Priority: Normal |
| 745 |
X-Mailer: Microsoft Outlook Express 4.72.2106.4 |
| 746 |
X-Mimeole: Produced By Microsoft MimeOLE V4.72.2106.4 |
| 747 |
|
| 748 |
|
| 749 |
Check out this site. It works well. The only problem I had was timing |
| 750 |
issues when trying to read and write to the port too quickly. |
| 751 |
|
| 752 |
http://www.codeguru.com/show.cgi?general=/misc/misc_toc.shtml |
| 753 |
|
| 754 |
|
| 755 |
-----Original Message----- |
| 756 |
From: Mark Wallace <[email protected]> |
| 757 |
To: [email protected] <[email protected]> |
| 758 |
Date: Wednesday, August 12, 1998 9:25 AM |
| 759 |
Subject: serial library for C++ |
| 760 |
|
| 761 |
|
| 762 |
>Hello, |
| 763 |
> I have a handy board with poloroid transducers and I am trying use the |
| 764 |
>results of my distance measurments in a C++ program on the computer. I |
| 765 |
>have found programs on the handyboard web page that should alow the |
| 766 |
>handyboard to transmit information over the serial line. What I am looking |
| 767 |
>for is if anyone knows were I could find a serial library for Microsofts |
| 768 |
>Visual C++ 5.0. I would like to find one that is free or sharware but any |
| 769 |
>information on any serial librarys that will work would be appreciated. |
| 770 |
>Thanks. |
| 771 |
>Mark Wallace |
| 772 |
> |
| 773 |
> e-mail [email protected] |
| 774 |
> [email protected] |
| 775 |
>web page http://sps1.phys.vt.ede/~mwallace |
| 776 |
> |
| 777 |
>"What a waist it would be after 4 billion tortuous years of evolution if |
| 778 |
>the dominant organism contrived its own self-distruction" |
| 779 |
> Carl Sagan |
| 780 |
> |
| 781 |
|
| 782 |
From [email protected] Thu Jul 16 03:42:38 1998 |
| 783 |
Received: from aleve.media.mit.edu by hub.media.mit.edu; (5.65v3.2/1.1/06Jun95-8.2MPM) |
| 784 |
id AA24945; Thu, 16 Jul 1998 03:42:38 -0400 |
| 785 |
Received: from mercury.Sun.COM (mercury.Sun.COM [192.9.25.1]) |
| 786 |
by aleve.media.mit.edu (8.8.7/ML970927) with SMTP id CAA07415 |
| 787 |
for <[email protected]>; Thu, 16 Jul 1998 02:44:58 -0400 (EDT) |
| 788 |
Received: from Aus.Sun.COM ([129.158.80.6]) by mercury.Sun.COM (SMI-8.6/mail.byaddr) with SMTP id XAA29734; Wed, 15 Jul 1998 23:44:52 -0700 |
| 789 |
Received: from war.Aus.Sun.COM by Aus.Sun.COM id QAA03011 |
| 790 |
(SMI-8.6/SMI-4.1 for <>); Thu, 16 Jul 1998 16:44:50 +1000 |
| 791 |
Received: from drone by war.Aus.Sun.COM (SMI-8.6/SMI-SVR4) |
| 792 |
id QAA10921; Thu, 16 Jul 1998 16:44:20 +1000 |
| 793 |
Message-Id: <[email protected]> |
| 794 |
Date: Thu, 16 Jul 1998 16:41:56 +1000 (EST) |
| 795 |
From: Scott Seaton - Systems Consultant - ESG <[email protected]> |
| 796 |
Reply-To: Scott Seaton - Systems Consultant - ESG <[email protected]> |
| 797 |
Subject: Re: Handyboard/RWP without p-code |
| 798 |
To: [email protected], [email protected] |
| 799 |
Mime-Version: 1.0 |
| 800 |
Content-Type: MULTIPART/mixed; BOUNDARY=Troop_of_Baboons_752_000 |
| 801 |
X-Mailer: dtmail 1.2.0 CDE Version 1.2 SunOS 5.6 sun4u sparc |
| 802 |
|
| 803 |
--Troop_of_Baboons_752_000 |
| 804 |
Content-Type: TEXT/plain; charset=us-ascii |
| 805 |
Content-MD5: i/HKSIa/Vk0mZT5ml+q21A== |
| 806 |
|
| 807 |
Hi |
| 808 |
|
| 809 |
I suggest that you contact ImageCraft. |
| 810 |
http://www.imagecraft.com/software/index.html or [email protected] |
| 811 |
|
| 812 |
They have a C compiler for 68HC11 CPU's that will do what you want, including a |
| 813 |
library for the HandyBoard (see attached e-mail) ! |
| 814 |
|
| 815 |
I have no affiliation with ImageCraft (other than as a satisfied customer). |
| 816 |
|
| 817 |
Hope this helps |
| 818 |
Scott |
| 819 |
============================================================================== |
| 820 |
,-_|\ Scott Seaton - Sun Enterprise Services - Systems Consultant |
| 821 |
/ \ Sun Microsystems Australia Pty Ltd E-mail : [email protected] |
| 822 |
\_,-\_+ 828 Pacific Highway Phone : +61 2 9844 5381 |
| 823 |
v Gordon, N.S.W., 2072, AUSTRALIA Fax : +61 2 9844 5161 |
| 824 |
============================================================================== |
| 825 |
|
| 826 |
--Troop_of_Baboons_752_000 |
| 827 |
Content-Type: MESSAGE/rfc822; name=Mailbox |
| 828 |
Content-Description: Mailbox |
| 829 |
|
| 830 |
From [email protected] Fri Jul 10 18:59:26 1998 |
| 831 |
Return-Path: <[email protected]> |
| 832 |
Received: from Aus.Sun.COM by war.Aus.Sun.COM (SMI-8.6/SMI-SVR4) |
| 833 |
id SAA14426; Fri, 10 Jul 1998 18:59:26 +1000 |
| 834 |
Received: from earth.sun.com by Aus.Sun.COM id SAA24238 |
| 835 |
(SMI-8.6/SMI-4.1 for <<[email protected]>>); Fri, 10 Jul 1998 18:59:48 +1000 |
| 836 |
Received: from iisesun.iise.CSIRO.AU (iisesun.iise.csiro.au [130.155.5.44]) |
| 837 |
by earth.sun.com (8.8.8/8.8.8) with SMTP id BAA18609 |
| 838 |
for <[email protected]>; Fri, 10 Jul 1998 01:59:44 -0700 (PDT) |
| 839 |
Received: from lists1.best.com (lists1.best.com [206.86.8.15]) by iisesun.iise.CSIRO.AU (SMI-8.6/8.6.12-IISE-SWA) with ESMTP id SAA25847 for <[email protected]>; Fri, 10 Jul 1998 18:49:31 +1000 |
| 840 |
Received: (from daemon@localhost) by lists1.best.com (8.9.0/8.8.BEST) id BAA15320 for [email protected]; Fri, 10 Jul 1998 01:04:34 -0700 (PDT) |
| 841 |
Message-Id: <[email protected]> |
| 842 |
From: Christina Willrich & Richard Man <[email protected]> |
| 843 |
Subject: icc11 Handyboard library available |
| 844 |
Date: Fri, 10 Jul 1998 00:58:49 -0700 |
| 845 |
BestServHost: lists.best.com |
| 846 |
MIME-Version: 1.0 |
| 847 |
Content-Type: text/plain; charset="us-ascii" |
| 848 |
Sender: [email protected] |
| 849 |
Errors-To: [email protected] |
| 850 |
Reply-To: [email protected] |
| 851 |
To: [email protected] |
| 852 |
content-length: 399 |
| 853 |
Status: RO |
| 854 |
X-Status: $$$$ |
| 855 |
X-UID: 0000000001 |
| 856 |
|
| 857 |
At long last, I dusted off Chuck McManis Handyboard library and ported it |
| 858 |
to V5. No reason why it can't work with V4.5 either ;-) Anyway, to try it |
| 859 |
out, point your browser to |
| 860 |
|
| 861 |
ftp://ftp.imagecraft.com/pub/libhb.zip |
| 862 |
|
| 863 |
Chuck really did a great job with the LCD. There are commands to scroll, |
| 864 |
move etc. Make sure you try the lcdtest2.c test. |
| 865 |
|
| 866 |
// richard |
| 867 |
[email protected] http://www.imagecraft.com |
| 868 |
|
| 869 |
|
| 870 |
--Troop_of_Baboons_752_000-- |
| 871 |
|