Debian Codegraph @

t/results/all_handy_buffer

raw
1 From [email protected] Wed Jul 1 13:17:17 1998
2 Received: from aleve.media.mit.edu by hub.media.mit.edu; (5.65v3.2/1.1/06Jun95-8.2MPM)
3 id AA10324; Wed, 1 Jul 1998 13:17:17 -0400
4 Received: from comp.uark.edu ([email protected] [130.184.252.197])
5 by aleve.media.mit.edu (8.8.7/ML970927) with ESMTP id LAA00083
6 for <[email protected]>; Wed, 1 Jul 1998 11:56:44 -0400 (EDT)
7 Received: from comp.uark.edu (IDENT:[email protected] [130.184.201.233])
8 by comp.uark.edu (8.9.0/8.9.0) with ESMTP id KAA12202;
9 Wed, 1 Jul 1998 10:56:30 -0500 (CDT)
10 Sender: [email protected]
11 Message-Id: <[email protected]>
12 Date: Wed, 01 Jul 1998 10:56:30 -0500
13 From: Douglas Blank <[email protected]>
14 Organization: University of Arkansas, CS
15 X-Mailer: Mozilla 4.04 [en] (X11; I; Linux 2.0.33 i686)
16 Mime-Version: 1.0
17 To: Aaron Edsinger <[email protected]>
18 Cc: handy <[email protected]>
19 Subject: Re: Serial Interface
20 References: <[email protected]>
21 Content-Type: text/plain; charset=us-ascii
22 Content-Transfer-Encoding: 7bit
23
24 Aaron Edsinger wrote:
25
26 > Hello,
27 > I've been having some problems using my HandyBoard to talk directly to my
28 > PC via the serial interface. I disable Interactive C and then Poke() and
29 > Peek() as has been described on this list. I send short character strings
30 > from my PC to the HandyBoard under Windows 95. If I send strings longer
31 > than 2 characters, it seems that some of the characters get lost. This
32 > behavior seems to be affected by repositioning or slightly modifying the
33 > code, suggesting perhaps a timing issue.
34
35 Although there is the HEXMON program, I too, have been trying to do what
36 you describe, and encountered the same problems. I found it to be a
37 timing issue, and, through trial and error, have a found some settings
38 that seem to work most of the time.
39
40 My goal was to make C code that looked the same when compiled and run on
41 the Host is the code that ran under IC.
42
43 I am including the host and HB programs here. If anyone knows of a
44 better way of communicating, please let us know.
45
46 -Doug Blank
47
48 =====================================================================
49 [email protected] Douglas Blank, University of Arkansas
50 Assistant Professor Computer Science
51 ==================== http://www.uark.edu/~dblank ====================
52
53 This code was written for MS C++4.0 running on Win95.
54
55 //************** BEGIN: serial_HOST.c
56
57 /* VC++4.0 HandyBoard Host Programming System
58 Dr. Douglas S. Blank
59 University of Arkansas, Department of Computer Science
60 www.uark.edu/~dblank
61
62 This code runs on a host PC.
63 */
64
65 #include <ctype.h>
66 #include <conio.h>
67 #include <stdlib.h>
68 #include <stdio.h>
69
70 #include "serial_HOST.h"
71
72 void main(int argc, char *argv[])
73 {
74 motor(0, 100);
75 motor(1, 100);
76 motor(2, 100);
77 motor(3, 100);
78 sleep(1000);
79 motor(0, -100);
80 motor(1, -100);
81 motor(2, -100);
82 motor(3, -100);
83 sleep(1000);
84 ao();
85 print("\nThis is a test");
86 printf("Knob is %d\n", knob() );
87 printf("Analog(0) is %d\n", analog(0));
88 printf("Digital(0) is %d\n", digital(0));
89 printf("Analog(1) is %d\n", analog(1));
90 printf("Digital(1) is %d\n", digital(1));
91 printf("Analog(2) is %d\n", analog(2));
92 printf("Digital(2) is %d\n", digital(2));
93 printf("Analog(3) is %d\n", analog(3));
94 printf("Digital(3) is %d\n", digital(3));
95 printf("Analog(4) is %d\n", analog(4));
96 printf("Digital(4) is %d\n", digital(4));
97 printf("Analog(5) is %d\n", analog(5));
98 printf("Digital(5) is %d\n", digital(5));
99 printf("Analog(6) is %d\n", analog(6));
100 printf("Digital(6) is %d\n", digital(6));
101 printf("Analog(7) is %d\n", analog(7));
102 printf("Digital(7) is %d\n", digital(7));
103 printf("Analog(8) is %d\n", analog(8));
104 printf("Digital(8) is %d\n", digital(8));
105 printf("Analog(9) is %d\n", analog(9));
106 printf("Digital(9) is %d\n", digital(9));
107 printf("Analog(10) is %d\n", analog(10));
108 printf("Digital(10) is %d\n", digital(10));
109 printf("Analog(11) is %d\n", analog(11));
110 printf("Digital(11) is %d\n", digital(11));
111 printf("Analog(12) is %d\n", analog(12));
112 printf("Digital(12) is %d\n", digital(12));
113 printf("Analog(13) is %d\n", analog(13));
114 printf("Digital(13) is %d\n", digital(13));
115 printf("Analog(14) is %d\n", analog(14));
116 printf("Digital(14) is %d\n", digital(14));
117 printf("Analog(15) is %d\n", analog(15));
118 printf("Digital(15) is %d\n", digital(15));
119 beep();
120 sleep(1000);
121 while (! stop_button() ) {
122 sprintf(buffer, "%d.0", (knob() * 10));
123 tone( buffer, "0.1");
124 }
125 }
126
127 //************** END: serial_HOST.c
128
129 //************** BEGIN: serial_HOST.h
130
131 /* VC++4.0 HandyBoard Host Programming System
132 Dr. Douglas S. Blank
133 University of Arkansas, Department of Computer Science
134 www.uark.edu/~dblank
135 */
136
137 #define MOTOR 0
138 #define AO 1
139 #define ANALOG 2
140 #define DIGITAL 3
141 #define PRINTF 4
142 #define KNOB 5
143 #define BEEP 6
144 #define TONE 7
145 #define START_BUTTON 8
146 #define STOP_BUTTON 9
147 #define QUIT 113
148
149 #define sleep(NUM) _sleep(NUM)
150 #define SERIALWAIT 5
151
152 unsigned short PORT = 0x3f8; // LPT1: 0x378 COM1: 0x3f8
153
154 int send(int i) {
155 int retval;
156 retval = _outp( PORT, i);
157 _sleep(SERIALWAIT);
158 return retval;
159 }
160
161 int receive() {
162 int retval;
163 retval = _inp( PORT);
164 _sleep(SERIALWAIT);
165 retval = _inp( PORT);
166 return retval;
167 }
168
169 void hangup() {
170 send(QUIT);
171 }
172
173 void print(char buffer[]) {
174 int i;
175 send(PRINTF);
176 for (i = 0; buffer[i] != 0; i++)
177 send(buffer[i]);
178 send('\0');
179 }
180
181 void motor(int motornum, int power) {
182 send(MOTOR);
183 send(motornum);
184 send(power + 100); // taken off on the other end
185 }
186
187 int analog(int sensor) {
188 send(ANALOG);
189 send(sensor);
190 return receive();
191 }
192
193 int digital(int sensor) {
194 send(DIGITAL);
195 send(sensor);
196 return receive();
197 }
198
199 void ao() {
200 send(AO);
201 }
202
203 int knob() {
204 send(KNOB);
205 return receive();
206 }
207
208 void beep() {
209 send(BEEP);
210 }
211
212 void tone(char f1[], char f2[]) {
213 int i;
214 send(TONE);
215 for (i = 0; f1[i] != 0; i++)
216 send(f1[i]);
217 send('\0');
218 for (i = 0; f2[i] != 0; i++)
219 send(f2[i]);
220 send('\0');
221 _sleep((unsigned long) (atof(f2) * 1000)); // to keep from
222 overflowing serial line
223 }
224
225 void interactive()
226 {
227 char c;
228 char key = ' ';
229 while (key != 'q') {
230 key = getch();
231 send(key);
232 printf("Sent %c\n", key);
233 c = receive();
234 printf("Got %c as a return value\n", c);
235 }
236 }
237
238 int start_button() {
239 send(START_BUTTON);
240 return receive();
241 }
242
243 int stop_button() {
244 send(STOP_BUTTON);
245 return receive();
246 }
247 //************** END: serial_HOST.h
248
249 //************** BEGIN: serial_HB.c
250
251 /* VC++4.0 HandyBoard Programming System
252 (Parts taken from other HB programs)
253 Dr. Douglas S. Blank
254 University of Arkansas, Department of Computer Science
255 www.uark.edu/~dblank
256
257 This code runs on the HB
258 */
259
260 #define MOTOR 0
261 #define AO 1
262 #define ANALOG 2
263 #define DIGITAL 3
264 #define PRINTF 4
265 #define KNOB 5
266 #define BEEP 6
267 #define TONE 7
268 #define START_BUTTON 8
269 #define STOP_BUTTON 9
270 #define QUIT 113
271
272 int _isspace(int a) /* returns 1 for space or tab, 0
273 otherwise */
274 /* internal routine used by atof() and
275 cgets() */
276
277 {
278 return ((a == 32) || (a == 9)); /* 32 is space, 9 is tab */
279 }
280
281 /*****************************************************************************/
282
283 int _isdigit(int a) /* returns 1 if a digit 0-9, 0 otherwise */
284 /* internal routine used by atof() */
285
286 {
287 return ((a >= 48) && (a <= 57)); /* 48 is '0', 57 is '9' */
288 }
289
290 float atof(char s[]) /* Convert a string containing a number in
291 ASCII */
292 /* form (integer, float, or exponential float)
293 to a */
294 /* float. Strips whitespace characters (space
295 and */
296 /* tab) from the front of the string, but
297 stops */
298 /* parsing at the first (unexpected)
299 non-numeric */
300 /* character if the string has garbage at the
301 end. */
302 /* This means that " 34.3foo78" translates to
303 34.3. */
304 /* Modified from atof() function in the
305 standard */
306 /* library of the Hi-Tec C compiler for
307 CP/M. */
308 /* Note: all string literals converted to
309 decimal */
310 /* form because IC can't deal with string
311 literals */
312 /* in math
313 calculations. */
314 /* Also note: very ugly code because IC will
315 not */
316 /* allow any math operations on pointers! Thus,
317 the */
318 /* the number string has to be treated as an
319 array! */
320 /* Also also note: no error handling; assumes
321 that */
322 /* the string is a valid representation of a
323 number! */
324 /* Valid range for exponential-format numbers
325 is */
326 /* approximately 2.0e-38 to
327 3.4e+38. */
328
329 {
330 int i=0; /* index into string array */
331 int sign=0; /* mantissa sign flag: 0=positive,
332 1=negative */
333 int exp0=0; /* mantissa exponent counter */
334 int eexp=0; /* E-form exponent counter */
335 int expsign=0; /* exponent sign flag: 0=positive,
336 1=negative */
337 float m=0.0; /* mantissa accumulator */
338
339 /* skip any leading whitespace (space, tab) */
340 while (_isspace(s[i]))
341 i++; /* skip it */
342
343 /* check for mantissa sign */
344 if (s[i] == 45) /* 45 is '-' */
345 {
346 sign = 1; /* flag minus sign */
347 i++; /* point to next */
348 }
349 else if (s[i] == 43) /* 43 is '+' */
350 i++; /* point to next */
351
352 /* now get all digits up to either a decimal point or an e/E */
353 while (_isdigit(s[i]))
354 {
355 m = 10.0*m + (float)(s[i] - 48); /* 48 is '0' */
356 i++; /* point to next */
357 }
358
359 /* no more digits, so check for decimal point */
360 if (s[i] == 46) /* 46 is '.' */
361 {
362 i++; /* point to next */
363 /* get all digits after decimal point */
364 while (_isdigit(s[i]))
365 {
366 exp0--;
367 m = 10.0*m + (float)(s[i] - 48); /* 48 is '0' */
368 i++; /* point to next */
369 }
370 }
371
372 /* check for e/E exponential form */
373 if ((s[i] == 101) || (s[i] == 69)) /* 101 is 'e', 69 is 'E' */
374 {
375 i++; /* point to next */
376 /* check for exponent sign */
377 if (s[i] == 45) /* 45 is '-' */
378 {
379 expsign = 1; /* flag negative exponent */
380 i++; /* point to next */
381 }
382 else if (s[i] == 43) /* 43 is '+' */
383 i++; /* point to next */
384
385 /* now get exponent */
386 while (_isdigit(s[i]))
387 {
388 eexp = eexp*10 + s[i] - 48; /* 48 is '0' */
389 i++; /* point to next */
390 }
391
392 /* adjust exponent sign */
393 if (expsign)
394 eexp = -eexp; /* make it negative */
395 }
396
397 /* compute absolute value of final float */
398 exp0 += eexp;
399 while (exp0 < 0) /* for negative exponents */
400 {
401 m = m / 10.0;
402 exp0++;
403 }
404 while (exp0 > 0) /* for positive exponents */
405 {
406 m = m * 10.0;
407 exp0--;
408 }
409
410 /* adjust final float sign from mantissa */
411 if (sign)
412 return (-m); /* negative */
413 else
414 return (m); /* positive */
415 }
416
417 void disable_pcode_serial()
418 /* necessary to receive characters using serial_getchar */
419 {
420 poke(0x3c, 1);
421 }
422
423 void reenable_pcode_serial()
424 /* necessary for IC to interact with board again */
425 {
426 poke(0x3c, 0);
427 }
428
429 /*
430 ======================================================================
431 For sending and receiving single bytes, you can use Randy's IC code:
432 */
433
434 void serial_putchar(int c)
435 {
436 while (!(peek(0x102e) & 0x80)); /* wait until serial transmit empty
437 */
438 poke(0x102f, c); /* send character */
439 }
440
441 int serial_getchar()
442 {
443 while (!(peek(0x102e) & 0x20)); /* wait for received character */
444 return peek(0x102f);
445 }
446
447 void main(void) {
448 int pos, c = ' ', var1, var2;
449 float f1, f2;
450 char buffer[80];
451 disable_pcode_serial();
452 beep();
453 printf("\nSerial IO Mode!");
454 printf("Listening...");
455 msleep(500L);
456 while (c != 'q') {
457 c = serial_getchar();
458 /* printf("[%d] ", c); */
459 if (c == MOTOR) {
460 var1 = serial_getchar();
461 var2 = serial_getchar() - 100;
462 motor(var1, var2);
463 } else if (c == AO) {
464 ao();
465 } else if (c == ANALOG) {
466 var1 = serial_getchar();
467 serial_putchar(analog(var1));
468 } else if (c == DIGITAL) {
469 var1 = serial_getchar();
470 serial_putchar(digital(var1));
471 } else if (c == PRINTF) {
472 pos = 0;
473 while (c != 0) {
474 buffer[pos++] = c;
475 c = serial_getchar();
476 }
477 buffer[pos] = '\0';
478 printf(buffer);
479 } else if (c == TONE) {
480 pos = 0;
481 c = serial_getchar();
482 while (c != 0) {
483 buffer[pos++] = c;
484 c = serial_getchar();
485 }
486 buffer[pos] = '\0';
487 f1 = atof(buffer);
488 pos = 0;
489 c = serial_getchar();
490 while (c != 0) {
491 buffer[pos++] = c;
492 c = serial_getchar();
493 }
494 buffer[pos] = '\0';
495 f2 = atof(buffer);
496 tone(f1, f2);
497 } else if (c == START_BUTTON) {
498 serial_putchar(start_button());
499 } else if (c == STOP_BUTTON) {
500 serial_putchar(stop_button());
501 } else if (c == BEEP) {
502 beep();
503 } else if (c == KNOB) {
504 serial_putchar(knob());
505 }
506 }
507 reenable_pcode_serial();
508 printf("\nHB Mode!");
509 }
510
511 //************** END: serial_HB.c
512
513 From [email protected] Tue Jul 7 20:33:03 1998
514 Received: from aleve.media.mit.edu by hub.media.mit.edu; (5.65v3.2/1.1/06Jun95-8.2MPM)
515 id AA32480; Tue, 7 Jul 1998 20:33:03 -0400
516 Received: from wormwood.ee.byu.edu (wormwood.ee.byu.edu [128.187.30.54])
517 by aleve.media.mit.edu (8.8.7/ML970927) with ESMTP id TAA30127
518 for <[email protected]>; Tue, 7 Jul 1998 19:48:43 -0400 (EDT)
519 Received: from wormwood (localhost [127.0.0.1]) by wormwood.ee.byu.edu with SMTP (8.7.6/8.7.1) id RAA26916 for <[email protected]>; Tue, 7 Jul 1998 17:48:42 -0600 (MDT)
520 Sender: [email protected]
521 Message-Id: <[email protected]>
522 Date: Tue, 07 Jul 1998 17:48:41 -0600
523 From: "Timothy B. Gold" <[email protected]>
524 X-Mailer: Mozilla 3.04Gold (X11; I; HP-UX B.10.20 9000/780)
525 Mime-Version: 1.0
526 To: [email protected]
527 Subject: Interrupt Handler for Serial communication
528 Content-Type: multipart/mixed; boundary="------------18CC6AC44E2E"
529
530 This is a multi-part message in MIME format.
531
532 --------------18CC6AC44E2E
533 Content-Type: text/plain; charset=us-ascii
534 Content-Transfer-Encoding: 7bit
535
536 Here's a bit of code that will buffer incoming serial information so
537 that no information will be lost when transmitting to the handy board.
538 There are two files: serial_isr.c and serial_isr.asm. You'll need to
539 assemble the .asm file using as11_ic, and then both the .c file and the
540 .icb file need to be loaded onto the handy board. I'm sure improvements
541 could be made to the code to clean it up a little, but it's a start (and
542 I haven't had any problems with it yet). Enjoy!
543
544 --------------18CC6AC44E2E
545 Content-Type: text/plain; charset=us-ascii; name="serial_isr.c"
546 Content-Transfer-Encoding: 7bit
547 Content-Disposition: inline; filename="serial_isr.c"
548
549 /* C program to read serial port with interrupt service routine */
550 /* First version: Written by Anton Wirsch 20 Nov 1997 */
551
552 /*
553
554 Second Version: Written by Tim Gold 27 May 1998
555 BYU Robotics Lab
556 [email protected]
557
558 Really, the only thing left from the original code are a few
559 lines in the .asm file. Everything else I pretty much had to
560 rewrite from scratch to get it to work the way I wanted to.
561 But the orignal code by Anton was a very helpful starting point.
562
563 Needed files: serial_isr.c
564 serial_isr.icb
565 serial_isr.asm (needed to change the buffer size)
566
567 The buffer size here is 32 bytes (probably much larger than it needs
568 to be.) To change the buffer size, do the following:
569 1. Change the BUFFER_SIZE constant below to the
570 desired number of bytes.
571 2. Edit the line(s) in the serial_isr.asm which contain
572 the word "EDIT" in the comment so that the value
573 matches that of BUFFER_SIZE.
574 3. Recreate the serial_isr.icb file by typing the following:
575 > as11_ic serial_isr.asm
576
577 */
578
579
580
581
582 #define BUFFER_SIZE 32 /* change buffer size here -- see above */
583
584 /* various constants used by the program... */
585 #define BAUD 0x102b /* baud rate set to 9600 */
586 #define SCCR2 0x102d
587 #define SCCR1 0x102c
588 #define SCSR 0x102e
589 #define SCDR 0x102f
590
591 int buffer[BUFFER_SIZE]; /* this is the actual buffer */
592
593
594 void initSerial()
595 {
596 /* Call this routine to activate the serial interrupt handler. */
597 int i,temp;
598
599 /* clear out buffer */
600 for(i=0; i<BUFFER_SIZE; i++)
601 buffer[i] = 0;
602
603 /* clear vairous flags */
604 DATA_FLAG = 0;
605 INCOMING = 0;
606 CURRENT = 0;
607
608 /* pass address of buffer to interrupt routine */
609 buffer_ptr = (int) buffer;
610 BASE_ADDR = (int) buffer;
611
612 /* activate interrupt routine */
613 temp = peek(SCCR2);
614 temp |= 0x24;
615 poke(SCCR2, temp);
616 poke(0x3c, 1);
617 }
618
619 void closeSerial()
620 {
621 int temp;
622
623 /* deactivate the interrupt routine */
624 temp = peek(SCCR2);
625 temp &= 0xdf;
626 poke(SCCR2, temp);
627 READ_SERIAL = 0x0000;
628 poke(0x3c, 0);
629
630 }
631
632 void serialPutChar(int c)
633 {
634 /* call this function to write a character to the serial port */
635
636 while (!(peek(0x102e) & 0x80));
637 poke(0x102f, c);
638
639 }
640
641
642 int dataAvailable()
643 {
644 /* This function can be used to check to see if any data is available */
645 return DATA_FLAG;
646 }
647
648
649 int serialGetChar()
650 {
651 /* Create blocking getchar for serial port... */
652 int return_char;
653
654 /* loop until data is available */
655 while(!DATA_FLAG);
656
657 /* get the character to return */
658 return_char = buffer[CURRENT];
659
660 /* check for wrap around... */
661 CURRENT++;
662 if(CURRENT == BUFFER_SIZE)
663 CURRENT = 0;
664 if(CURRENT == INCOMING)
665 DATA_FLAG = 0;
666 return return_char;
667
668 }
669
670
671
672
673
674 --------------18CC6AC44E2E
675 Content-Type: text/plain; charset=us-ascii; name="serial_isr.asm"
676 Content-Transfer-Encoding: 7bit
677 Content-Disposition: inline; filename="serial_isr.asm"
678
679 /* This sets up the serial interrupt service routine */
680 /* First Version: Written by Anton L. Wirsch 20 Nov 1997 */
681 /* Second Version: Written by Tim Gold 27 May 1998
682 BYU Robotics Lab
683 [email protected]
684
685 Really, the only thing left from the original code are a few
686 lines in the .asm file. Everything else I pretty much had to
687 rewrite from scratch to get it to work the way I wanted to.
688 But the orignal code by Anton was a very helpful starting point.
689
690 Needed files: serial_isr.c
691 serial_isr.icb
692 serial_isr.asm (needed to change the buffer size)
693
694 The buffer size here is 32 bytes (probably much larger than it needs
695 to be.) To change the buffer size, do the following:
696 1. Change the BUFFER_SIZE constant in serial_isr.c to the
697 desired number of bytes.
698 2. Edit the line in this fils which contains
699 the word "EDIT" in the comment so that the value
700 matches that of BUFFER_SIZE.
701 3. Recreate the serial_isr.icb file by typing the following:
702 > as11_ic serial_isr.asm
703 */
704
705
706 /* change this line to match your library path... */
707 #include "/usr/local/ic/libs/6811regs.asm"
708
709 ORG MAIN_START
710 variable_CURRENT:
711 FDB 00 * ptr to next data to be read by user
712
713 variable_INCOMING:
714 FDB 00 * number of bytes received (circular count)
715
716 variable_BASE_ADDR:
717 FDB 00 * base address of buffer (to be set by init routine)
718
719 variable_DATA_FLAG:
720 FDB 00 * flag set when data is available
721
722 variable_buffer_ptr:
723 FDB 00 * pointer to CURRENT buffer
724
725 subroutine_initialize_module:
726 /* change this line to match your library path... */
727 #include "/usr/local/ic/libs/ldxibase.asm"
728
729 ldd SCIINT,X
730 std interrupt_code_exit+1
731 ldd #interrupt_code_start
732 std SCIINT,X
733
734 rts
735
736 interrupt_code_start:
737 ldad variable_INCOMING * store INCOMING into AB
738 cmpb #00 * compare B with 0
739 bhi skip * goto "skip" if (B > 0)
740 ldx variable_BASE_ADDR * STORE ADDRESS OF ARRY IN X
741 inx * SKIP THE FIRST (?)
742 inx * TWO BYTES (?)
743 inx * OFFSET TO THE HIGHER BYTE (?)
744 stx variable_buffer_ptr * SAVE PTR VALUE
745 bra cont
746
747 skip:
748 ldx variable_buffer_ptr * load buffer pointer into x
749 cont:
750 ldad variable_INCOMING * load INCOMING into AB
751 incb * increment INCOMING
752 cmpb #32 * compare B and 32 --EDIT TO CHANGE BUFFER SIZE--
753 beq reset_count * if a=32, goto reset_count
754 bra cont1
755 reset_count:
756 ldad #00 * set count to zero
757 cont1:
758 stad variable_INCOMING * store AB into INCOMING
759
760 ldab SCSR * load SCSR (SCI status register) into B (why?)
761 ldab SCDR * load SCSR (SCI data register) into B
762
763 stab ,X * store data in array
764 inx * increment by two bytes
765 inx
766 stx variable_buffer_ptr * save the pointer value
767 ldad #01 * load 1 into AB
768 stad variable_DATA_FLAG * store AB into DATA_FLAG (indicating data is available)
769 interrupt_code_exit:
770 jmp $0000
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787 --------------18CC6AC44E2E--
788
789
790
791 From [email protected] Wed Jul 1 02:44:06 1998
792 Received: from aleve.media.mit.edu by hub.media.mit.edu; (5.65v3.2/1.1/06Jun95-8.2MPM)
793 id AA22669; Wed, 1 Jul 1998 02:44:06 -0400
794 Received: from mail3.sirius.com (mail3.sirius.com [205.134.253.133])
795 by aleve.media.mit.edu (8.8.7/ML970927) with ESMTP id CAA13214
796 for <[email protected]>; Wed, 1 Jul 1998 02:01:55 -0400 (EDT)
797 Received: from edsinger (ppp-asfm03--126.sirius.net [205.134.240.126])
798 by mail3.sirius.com (8.8.7/Sirius-8.8.7-97.08.12) with ESMTP id XAA26862
799 for <[email protected]>; Tue, 30 Jun 1998 23:01:54 -0700 (PDT)
800 Message-Id: <[email protected]>
801 From: "Aaron Edsinger" <[email protected]>
802 To: "handy" <[email protected]>
803 Subject: Serial Interface
804 Date: Wed, 1 Jul 1998 02:06:39 +0100
805 X-Msmail-Priority: Normal
806 X-Priority: 3
807 X-Mailer: Microsoft Internet Mail 4.70.1162
808 Mime-Version: 1.0
809 Content-Type: text/plain; charset=ISO-8859-1
810 Content-Transfer-Encoding: 7bit
811
812 Hello,
813 I've been having some problems using my HandyBoard to talk directly to my
814 PC via the serial interface. I disable Interactive C and then Poke() and
815 Peek() as has been described on this list. I send short character strings
816 from my PC to the HandyBoard under Windows 95. If I send strings longer
817 than 2 characters, it seems that some of the characters get lost. This
818 behavior seems to be affected by repositioning or slightly modifying the
819 code, suggesting perhaps a timing issue.
820
821 Why might this be? Is there any way to check for an error situation?
822
823 Thanks for any help,
824 Aaron
825 From [email protected] Thu Jul 16 03:13:49 1998
826 Received: from aleve.media.mit.edu by hub.media.mit.edu; (5.65v3.2/1.1/06Jun95-8.2MPM)
827 id AA23518; Thu, 16 Jul 1998 03:13:49 -0400
828 Received: from hq.freegate.com ([208.226.86.1])
829 by aleve.media.mit.edu (8.8.7/ML970927) with SMTP id CAA18991
830 for <[email protected]>; Thu, 16 Jul 1998 02:17:47 -0400 (EDT)
831 Received: (qmail+freegate 6968 invoked by alias); 16 Jul 1998 06:17:38 -0000
832 Received: from dialip-04.hq.freegate.com (HELO freegate.com) (208.226.86.222)
833 by hq.freegate.com with SMTP; 16 Jul 1998 06:17:38 -0000
834 Message-Id: <[email protected]>
835 Date: Wed, 15 Jul 1998 23:21:14 -0700
836 From: Chuck McManis <[email protected]>
837 Reply-To: [email protected]
838 Organization: Freegate Corporation
839 X-Mailer: Mozilla 4.04 [en] (Win95; I)
840 Mime-Version: 1.0
841 To: David Rye <[email protected]>
842 Cc: [email protected]
843 Subject: Re: Handyboard/RWP without p-code
844 References: <[email protected]>
845 Content-Type: text/plain; charset=us-ascii
846 Content-Transfer-Encoding: 7bit
847
848 Get a copy of icc11 v5.0 or later (from www.imagecraft.com) and use the
849 handyboard library from their site.
850
851 --Chuck
852
853 From [email protected] Thu Jul 16 03:42:38 1998
854 Received: from aleve.media.mit.edu by hub.media.mit.edu; (5.65v3.2/1.1/06Jun95-8.2MPM)
855 id AA24945; Thu, 16 Jul 1998 03:42:38 -0400
856 Received: from mercury.Sun.COM (mercury.Sun.COM [192.9.25.1])
857 by aleve.media.mit.edu (8.8.7/ML970927) with SMTP id CAA07415
858 for <[email protected]>; Thu, 16 Jul 1998 02:44:58 -0400 (EDT)
859 Received: from Aus.Sun.COM ([129.158.80.6]) by mercury.Sun.COM (SMI-8.6/mail.byaddr) with SMTP id XAA29734; Wed, 15 Jul 1998 23:44:52 -0700
860 Received: from war.Aus.Sun.COM by Aus.Sun.COM id QAA03011
861 (SMI-8.6/SMI-4.1 for <>); Thu, 16 Jul 1998 16:44:50 +1000
862 Received: from drone by war.Aus.Sun.COM (SMI-8.6/SMI-SVR4)
863 id QAA10921; Thu, 16 Jul 1998 16:44:20 +1000
864 Message-Id: <[email protected]>
865 Date: Thu, 16 Jul 1998 16:41:56 +1000 (EST)
866 From: Scott Seaton - Systems Consultant - ESG <[email protected]>
867 Reply-To: Scott Seaton - Systems Consultant - ESG <[email protected]>
868 Subject: Re: Handyboard/RWP without p-code
869 To: [email protected], [email protected]
870 Mime-Version: 1.0
871 Content-Type: MULTIPART/mixed; BOUNDARY=Troop_of_Baboons_752_000
872 X-Mailer: dtmail 1.2.0 CDE Version 1.2 SunOS 5.6 sun4u sparc
873
874 --Troop_of_Baboons_752_000
875 Content-Type: TEXT/plain; charset=us-ascii
876 Content-MD5: i/HKSIa/Vk0mZT5ml+q21A==
877
878 Hi
879
880 I suggest that you contact ImageCraft.
881 http://www.imagecraft.com/software/index.html or [email protected]
882
883 They have a C compiler for 68HC11 CPU's that will do what you want, including a
884 library for the HandyBoard (see attached e-mail) !
885
886 I have no affiliation with ImageCraft (other than as a satisfied customer).
887
888 Hope this helps
889 Scott
890 ==============================================================================
891 ,-_|\ Scott Seaton - Sun Enterprise Services - Systems Consultant
892 / \ Sun Microsystems Australia Pty Ltd E-mail : [email protected]
893 \_,-\_+ 828 Pacific Highway Phone : +61 2 9844 5381
894 v Gordon, N.S.W., 2072, AUSTRALIA Fax : +61 2 9844 5161
895 ==============================================================================
896
897 --Troop_of_Baboons_752_000
898 Content-Type: MESSAGE/rfc822; name=Mailbox
899 Content-Description: Mailbox
900
901 From [email protected] Fri Jul 10 18:59:26 1998
902 Return-Path: <[email protected]>
903 Received: from Aus.Sun.COM by war.Aus.Sun.COM (SMI-8.6/SMI-SVR4)
904 id SAA14426; Fri, 10 Jul 1998 18:59:26 +1000
905 Received: from earth.sun.com by Aus.Sun.COM id SAA24238
906 (SMI-8.6/SMI-4.1 for <<[email protected]>>); Fri, 10 Jul 1998 18:59:48 +1000
907 Received: from iisesun.iise.CSIRO.AU (iisesun.iise.csiro.au [130.155.5.44])
908 by earth.sun.com (8.8.8/8.8.8) with SMTP id BAA18609
909 for <[email protected]>; Fri, 10 Jul 1998 01:59:44 -0700 (PDT)
910 Received: from lists1.best.com (lists1.best.com [206.86.8.15]) by iisesun.iise.CSIRO.AU (SMI-8.6/8.6.12-IISE-SWA) with ESMTP id SAA25847 for <[email protected]>; Fri, 10 Jul 1998 18:49:31 +1000
911 Received: (from daemon@localhost) by lists1.best.com (8.9.0/8.8.BEST) id BAA15320 for [email protected]; Fri, 10 Jul 1998 01:04:34 -0700 (PDT)
912 Message-Id: <[email protected]>
913 From: Christina Willrich & Richard Man <[email protected]>
914 Subject: icc11 Handyboard library available
915 Date: Fri, 10 Jul 1998 00:58:49 -0700
916 BestServHost: lists.best.com
917 MIME-Version: 1.0
918 Content-Type: text/plain; charset="us-ascii"
919 Sender: [email protected]
920 Errors-To: [email protected]
921 Reply-To: [email protected]
922 To: [email protected]
923 content-length: 399
924 Status: RO
925 X-Status: $$$$
926 X-UID: 0000000001
927
928 At long last, I dusted off Chuck McManis Handyboard library and ported it
929 to V5. No reason why it can't work with V4.5 either ;-) Anyway, to try it
930 out, point your browser to
931
932 ftp://ftp.imagecraft.com/pub/libhb.zip
933
934 Chuck really did a great job with the LCD. There are commands to scroll,
935 move etc. Make sure you try the lcdtest2.c test.
936
937 // richard
938 [email protected] http://www.imagecraft.com
939
940
941 --Troop_of_Baboons_752_000--
942
943 From [email protected] Mon Jul 27 18:34:05 1998
944 Received: from aleve.media.mit.edu by hub.media.mit.edu; (5.65v3.2/1.1/06Jun95-8.2MPM)
945 id AA00723; Mon, 27 Jul 1998 18:34:05 -0400
946 Received: from theory.phys.vt.edu (theory.phys.vt.edu [128.173.176.33])
947 by aleve.media.mit.edu (8.8.7/ML970927) with ESMTP id RAA19984
948 for <[email protected]>; Mon, 27 Jul 1998 17:22:26 -0400 (EDT)
949 Received: from localhost (wallace@localhost)
950 by theory.phys.vt.edu (8.8.5/8.8.5) with SMTP id RAA00312
951 for <[email protected]>; Mon, 27 Jul 1998 17:22:24 -0400 (EDT)
952 Date: Mon, 27 Jul 1998 17:22:24 -0400 (EDT)
953 From: Mark Wallace <[email protected]>
954 To: [email protected]
955 Subject: sonar.c for the handyboard
956 Message-Id: <[email protected]>
957 Mime-Version: 1.0
958 Content-Type: TEXT/PLAIN; charset=US-ASCII
959
960 Hello,
961 I have a handyboard and 6500 series poloroid ultrasonic ranging
962 system. I have downloaded the sonar.c programs used to drive the
963 transducer for distance measurements. There appears to be a problem, or
964 atleast I think there is, with it. The sonar device is supposed to give
965 distances of up to 35ft but the TCNC time register is 16 bit and in the
966 program it says "if ((peekwork(0x100e)-start_time) < 0)" too much time has
967 elapsed and it returns -1. Therefore as soon as about 32700 counts goes
968 by, that value will go negative. I believe hex goes from 0 to 32768 then
969 -32768 to -1. In this case the difference will be < 0 if the object
970 is greater then about 9 ft. I have taken this out of the program and can
971 get accurate measurements up to atleast 30 ft but I have to look at the
972 value given and add multiples of 2^16 to it to figure out where it is.
973 Taking this out of the program also can get you stuck if you really are
974 out of range.
975 I have looked on the motorola web pages to see about this clock
976 and it says that the clock goes till it reachs $ffff and then flags
977 somewhere that there is an overflow and then starts over. I don't know
978 how to find out were in the chip this information might be stored. I know
979 the TCNT time register is at 0x100e from the notes on Simplified Sonar for
980 the Handy Board but I don't know where that overflow flag is stored. I
981 thought that maybe by setting this flag and using it in the loop you might
982 be about to get a greater distance out of you measurement.
983 Another question I have is about IC. I would like to display
984 numbers greater then 32000 and right now there are several int type
985 variables and normal C comands don't seem to work to make a "long" or any
986 other type that are larger then 32000. How does IC handle larger numbers?
987 I am only a student and don't have much experience with this stuff
988 so I would appreciate any feedback I can get on either of these problems.
989 Thanks.
990
991 Mark Wallace
992
993 e-mail [email protected]
994 [email protected]
995 Web page http://sps1.phys.vt.edu/~mwallace/index.html
996
997 "What a waste it would be after 4 billion tortuous years of evolution if
998 the dominant organism contrived its own self-destruction"
999 Carl Sagan
1000
1001
1002 From [email protected] Wed Aug 12 13:10:06 1998
1003 Received: from aleve.media.mit.edu by hub.media.mit.edu; (5.65v3.2/1.1/06Jun95-8.2MPM)
1004 id AA07529; Wed, 12 Aug 1998 13:10:06 -0400
1005 Received: from quackerjack.cc.vt.edu ([email protected] [198.82.160.250])
1006 by aleve.media.mit.edu (8.8.7/ML970927) with ESMTP id MAA05729
1007 for <[email protected]>; Wed, 12 Aug 1998 12:13:53 -0400 (EDT)
1008 Received: from sable.cc.vt.edu (sable.cc.vt.edu [128.173.16.30])
1009 by quackerjack.cc.vt.edu (8.8.8/8.8.8) with ESMTP id MAA20678
1010 for <[email protected]>; Wed, 12 Aug 1998 12:20:09 -0400 (EDT)
1011 Received: from research10.phys.vt.edu (dhcp9.phys.vt.edu [128.173.176.166])
1012 by sable.cc.vt.edu (8.8.8/8.8.8) with SMTP id MAA05159
1013 for <[email protected]>; Wed, 12 Aug 1998 12:13:51 -0400 (EDT)
1014 Message-Id: <[email protected]>
1015 X-Sender: [email protected] (Unverified)
1016 X-Mailer: QUALCOMM Windows Eudora Light Version 3.0.5 (32)
1017 Date: Wed, 12 Aug 1998 12:13:45 -0400
1018 To: [email protected]
1019 From: Mark Wallace <[email protected]>
1020 Subject: serial library for C++
1021 Mime-Version: 1.0
1022 Content-Type: text/plain; charset="us-ascii"
1023
1024 Hello,
1025 I have a handy board with poloroid transducers and I am trying use the
1026 results of my distance measurments in a C++ program on the computer. I
1027 have found programs on the handyboard web page that should alow the
1028 handyboard to transmit information over the serial line. What I am looking
1029 for is if anyone knows were I could find a serial for Microsofts
1030 Visual C++ 5.0. I would like to find one that is free or sharware but any
1031 information on any serial that will work would be appreciated.
1032 Thanks.
1033 Mark Wallace
1034
1035 e-mail [email protected]
1036 [email protected]
1037 web page http://sps1.phys.vt.ede/~mwallace
1038
1039 "What a waist it would be after 4 billion tortuous years of evolution if
1040 the dominant organism contrived its own self-distruction"
1041 Carl Sagan
1042
1043
1044 From [email protected] Wed Aug 12 13:42:19 1998
1045 Received: from aleve.media.mit.edu by hub.media.mit.edu; (5.65v3.2/1.1/06Jun95-8.2MPM)
1046 id AA13439; Wed, 12 Aug 1998 13:42:19 -0400
1047 Received: from mail3.sirius.com (mail3.sirius.com [205.134.253.133])
1048 by aleve.media.mit.edu (8.8.7/ML970927) with ESMTP id MAA10630
1049 for <[email protected]>; Wed, 12 Aug 1998 12:48:27 -0400 (EDT)
1050 Received: from aarone (ppp-asfm05--041.sirius.net [205.134.241.41])
1051 by mail3.sirius.com (8.8.7/Sirius-8.8.7-97.08.12) with SMTP id JAA20821;
1052 Wed, 12 Aug 1998 09:48:24 -0700 (PDT)
1053 Message-Id: <[email protected]>
1054 From: "Aaron Edsinger" <[email protected]>
1055 To: "Mark Wallace" <[email protected]>
1056 Cc: "handy" <[email protected]>
1057 Subject: Re: serial library for C++
1058 Date: Wed, 12 Aug 1998 12:53:41 -0700
1059 Mime-Version: 1.0
1060 Content-Type: text/plain;
1061 charset="iso-8859-1"
1062 Content-Transfer-Encoding: 7bit
1063 X-Priority: 3
1064 X-Msmail-Priority: Normal
1065 X-Mailer: Microsoft Outlook Express 4.72.2106.4
1066 X-Mimeole: Produced By Microsoft MimeOLE V4.72.2106.4
1067
1068
1069 Check out this site. It works well. The only problem I had was timing
1070 issues when trying to read and write to the port too quickly.
1071
1072 http://www.codeguru.com/show.cgi?general=/misc/misc_toc.shtml
1073
1074
1075 -----Original Message-----
1076 From: Mark Wallace <[email protected]>
1077 To: [email protected] <[email protected]>
1078 Date: Wednesday, August 12, 1998 9:25 AM
1079 Subject: serial library for C++
1080
1081
1082 >Hello,
1083 > I have a handy board with poloroid transducers and I am trying use the
1084 >results of my distance measurments in a C++ program on the computer. I
1085 >have found programs on the handyboard web page that should alow the
1086 >handyboard to transmit information over the serial line. What I am looking
1087 >for is if anyone knows were I could find a serial library for Microsofts
1088 >Visual C++ 5.0. I would like to find one that is free or sharware but any
1089 >information on any serial librarys that will work would be appreciated.
1090 >Thanks.
1091 >Mark Wallace
1092 >
1093 > e-mail [email protected]
1094 > [email protected]
1095 >web page http://sps1.phys.vt.ede/~mwallace
1096 >
1097 >"What a waist it would be after 4 billion tortuous years of evolution if
1098 >the dominant organism contrived its own self-distruction"
1099 > Carl Sagan
1100 >
1101
1102 From [email protected] Thu Jul 16 03:42:38 1998
1103 Received: from aleve.media.mit.edu by hub.media.mit.edu; (5.65v3.2/1.1/06Jun95-8.2MPM)
1104 id AA24945; Thu, 16 Jul 1998 03:42:38 -0400
1105 Received: from mercury.Sun.COM (mercury.Sun.COM [192.9.25.1])
1106 by aleve.media.mit.edu (8.8.7/ML970927) with SMTP id CAA07415
1107 for <[email protected]>; Thu, 16 Jul 1998 02:44:58 -0400 (EDT)
1108 Received: from Aus.Sun.COM ([129.158.80.6]) by mercury.Sun.COM (SMI-8.6/mail.byaddr) with SMTP id XAA29734; Wed, 15 Jul 1998 23:44:52 -0700
1109 Received: from war.Aus.Sun.COM by Aus.Sun.COM id QAA03011
1110 (SMI-8.6/SMI-4.1 for <>); Thu, 16 Jul 1998 16:44:50 +1000
1111 Received: from drone by war.Aus.Sun.COM (SMI-8.6/SMI-SVR4)
1112 id QAA10921; Thu, 16 Jul 1998 16:44:20 +1000
1113 Message-Id: <[email protected]>
1114 Date: Thu, 16 Jul 1998 16:41:56 +1000 (EST)
1115 From: Scott Seaton - Systems Consultant - ESG <[email protected]>
1116 Reply-To: Scott Seaton - Systems Consultant - ESG <[email protected]>
1117 Subject: Re: Handyboard/RWP without p-code
1118 To: [email protected], [email protected]
1119 Mime-Version: 1.0
1120 Content-Type: MULTIPART/mixed; BOUNDARY=Troop_of_Baboons_752_000
1121 X-Mailer: dtmail 1.2.0 CDE Version 1.2 SunOS 5.6 sun4u sparc
1122
1123 --Troop_of_Baboons_752_000
1124 Content-Type: TEXT/plain; charset=us-ascii
1125 Content-MD5: i/HKSIa/Vk0mZT5ml+q21A==
1126
1127 Hi
1128
1129 I suggest that you contact ImageCraft.
1130 http://www.imagecraft.com/software/index.html or [email protected]
1131
1132 They have a C compiler for 68HC11 CPU's that will do what you want, including a
1133 library for the HandyBoard (see attached e-mail) !
1134
1135 I have no affiliation with ImageCraft (other than as a satisfied customer).
1136
1137 Hope this helps
1138 Scott
1139 ==============================================================================
1140 ,-_|\ Scott Seaton - Sun Enterprise Services - Systems Consultant
1141 / \ Sun Microsystems Australia Pty Ltd E-mail : [email protected]
1142 \_,-\_+ 828 Pacific Highway Phone : +61 2 9844 5381
1143 v Gordon, N.S.W., 2072, AUSTRALIA Fax : +61 2 9844 5161
1144 ==============================================================================
1145
1146 --Troop_of_Baboons_752_000
1147 Content-Type: MESSAGE/rfc822; name=Mailbox
1148 Content-Description: Mailbox
1149
1150 From [email protected] Fri Jul 10 18:59:26 1998
1151 Return-Path: <[email protected]>
1152 Received: from Aus.Sun.COM by war.Aus.Sun.COM (SMI-8.6/SMI-SVR4)
1153 id SAA14426; Fri, 10 Jul 1998 18:59:26 +1000
1154 Received: from earth.sun.com by Aus.Sun.COM id SAA24238
1155 (SMI-8.6/SMI-4.1 for <<[email protected]>>); Fri, 10 Jul 1998 18:59:48 +1000
1156 Received: from iisesun.iise.CSIRO.AU (iisesun.iise.csiro.au [130.155.5.44])
1157 by earth.sun.com (8.8.8/8.8.8) with SMTP id BAA18609
1158 for <[email protected]>; Fri, 10 Jul 1998 01:59:44 -0700 (PDT)
1159 Received: from lists1.best.com (lists1.best.com [206.86.8.15]) by iisesun.iise.CSIRO.AU (SMI-8.6/8.6.12-IISE-SWA) with ESMTP id SAA25847 for <[email protected]>; Fri, 10 Jul 1998 18:49:31 +1000
1160 Received: (from daemon@localhost) by lists1.best.com (8.9.0/8.8.BEST) id BAA15320 for [email protected]; Fri, 10 Jul 1998 01:04:34 -0700 (PDT)
1161 Message-Id: <[email protected]>
1162 From: Christina Willrich & Richard Man <[email protected]>
1163 Subject: icc11 Handyboard library available
1164 Date: Fri, 10 Jul 1998 00:58:49 -0700
1165 BestServHost: lists.best.com
1166 MIME-Version: 1.0
1167 Content-Type: text/plain; charset="us-ascii"
1168 Sender: [email protected]
1169 Errors-To: [email protected]
1170 Reply-To: [email protected]
1171 To: [email protected]
1172 content-length: 399
1173 Status: RO
1174 X-Status: $$$$
1175 X-UID: 0000000001
1176
1177 At long last, I dusted off Chuck McManis Handyboard library and ported it
1178 to V5. No reason why it can't work with V4.5 either ;-) Anyway, to try it
1179 out, point your browser to
1180
1181 ftp://ftp.imagecraft.com/pub/libhb.zip
1182
1183 Chuck really did a great job with the LCD. There are commands to scroll,
1184 move etc. Make sure you try the lcdtest2.c test.
1185
1186 // richard
1187 [email protected] http://www.imagecraft.com
1188
1189
1190 --Troop_of_Baboons_752_000--
1191