Debian Codegraph @

src/hardware/ups/socomec/netvision/snmp/mode/outputlines.pm

raw
1 #
2 # Copyright 2024 Centreon (http://www.centreon.com/)
3 #
4 # Centreon is a full-fledged industry-strength solution that meets
5 # the needs in IT infrastructure and application monitoring for
6 # service performance.
7 #
8 # Licensed under the Apache License, Version 2.0 (the "License");
9 # you may not use this file except in compliance with the License.
10 # You may obtain a copy of the License at
11 #
12 # http://www.apache.org/licenses/LICENSE-2.0
13 #
14 # Unless required by applicable law or agreed to in writing, software
15 # distributed under the License is distributed on an "AS IS" BASIS,
16 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
17 # See the License for the specific language governing permissions and
18 # limitations under the License.
19 #
20
21 package hardware::ups::socomec::netvision::snmp::mode::outputlines;
22
23 use base qw(centreon::plugins::templates::counter);
24
25 use strict;
26 use warnings;
27 use centreon::plugins::templates::catalog_functions qw(catalog_status_threshold_ng);
28
29 sub custom_status_output {
30 my ($self, %options) = @_;
31
32 return sprintf("Output source status is '%s'", $self->{result_values}->{status});
33 }
34
35 sub prefix_oline_output {
36 my ($self, %options) = @_;
37
38 return "Output line '" . $options{instance_value}->{display} . "' ";
39 }
40
41 sub set_counters {
42 my ($self, %options) = @_;
43
44 $self->{maps_counters_type} = [
45 { name => 'global', type => 0, skipped_code => { -10 => 1 } },
46 { name => 'oline', type => 1, cb_prefix_output => 'prefix_oline_output', message_multiple => 'All output lines are ok', skipped_code => { -10 => 1 } }
47 ];
48
49 $self->{maps_counters}->{global} = [
50 {
51 label => 'source-status',
52 type => 2,
53 unknown_default => '%{status} =~ /unknown/i',
54 set => {
55 key_values => [ { name => 'status' } ],
56 closure_custom_output => $self->can('custom_status_output'),
57 closure_custom_perfdata => sub { return 0; },
58 closure_custom_threshold_check => \&catalog_status_threshold_ng
59 }
60 }
61 ];
62
63 $self->{maps_counters}->{oline} = [
64 { label => 'load', nlabel => 'line.output.load.percentage', set => {
65 key_values => [ { name => 'percent_load' } ],
66 output_template => 'load: %.2f %%',
67 perfdatas => [
68 { template => '%.2f', min => 0, max => 100, unit => '%', label_extra_instance => 1 }
69 ]
70 }
71 },
72 { label => 'current', nlabel => 'line.output.current.ampere', set => {
73 key_values => [ { name => 'current' } ],
74 output_template => 'current: %.2f A',
75 perfdatas => [
76 { template => '%.2f', min => 0, unit => 'A', label_extra_instance => 1 }
77 ]
78 }
79 },
80 { label => 'voltage', nlabel => 'line.output.voltage.volt', set => {
81 key_values => [ { name => 'voltage' } ],
82 output_template => 'voltage: %.2f V',
83 perfdatas => [
84 { template => '%.2f', unit => 'V', label_extra_instance => 1 }
85 ]
86 }
87 }
88 ];
89 }
90
91 sub new {
92 my ($class, %options) = @_;
93 my $self = $class->SUPER::new(package => __PACKAGE__, %options, force_new_perfdata => 1);
94 bless $self, $class;
95
96 $options{options}->add_options(arguments => {
97 'ignore-zero-counters' => { name => 'ignore_zero_counters' }
98 });
99
100 return $self;
101 }
102
103 my $map_status = {
104 1 => 'unknown', 2 => 'onMaintenBypass', 3 => 'onInverter',
105 4 => 'normalMode', 5 => 'ecoMode', 6 => 'onBypass',
106 7 => 'standby', 8 => 'upsOff'
107 };
108
109 my $mapping = {
110 netvision5 => {
111 voltage => { oid => '.1.3.6.1.4.1.4555.1.1.1.1.4.4.1.2' }, # upsOutputVoltage (Volt)
112 current => { oid => '.1.3.6.1.4.1.4555.1.1.1.1.4.4.1.3' }, # upsOutputCurrent (dA)
113 percent_load => { oid => '.1.3.6.1.4.1.4555.1.1.1.1.4.4.1.4' } # upsOutputPercentLoad
114 },
115 netvision6 => {
116 voltage => { oid => '.1.3.6.1.4.1.4555.1.1.7.1.4.4.1.2' }, # upsOutputVoltage (Volt)
117 current => { oid => '.1.3.6.1.4.1.4555.1.1.7.1.4.4.1.3' }, # upsOutputCurrent (dA)
118 percent_load => { oid => '.1.3.6.1.4.1.4555.1.1.7.1.4.4.1.4' } # upsOutputPercentLoad
119 }
120 };
121 my $mapping2 = {
122 netvision5 => {
123 status => { oid => '.1.3.6.1.4.1.4555.1.1.1.1.4.1', map => $map_status } # upsOutputSource
124 },
125 netvision6 => {
126 status => { oid => '.1.3.6.1.4.1.4555.1.1.7.1.4.1', map => $map_status } # upsOutputSource
127 }
128 };
129 my $tables = {
130 netvision5 => {
131 upsOutput => '.1.3.6.1.4.1.4555.1.1.1.1.4',
132 upsOutputEntry => '.1.3.6.1.4.1.4555.1.1.1.1.4.4.1'
133 },
134 netvision6 => {
135 upsOutput => '.1.3.6.1.4.1.4555.1.1.7.1.4',
136 upsOutputEntry => '.1.3.6.1.4.1.4555.1.1.7.1.4.4.1'
137 }
138 };
139
140 sub manage_selection {
141 my ($self, %options) = @_;
142
143 my $label = 'netvision6';
144 my $snmp_result = $options{snmp}->get_table(
145 oid => $tables->{$label}->{upsOutput},
146 end => $mapping->{$label}->{percent_load}->{oid}
147 );
148 if (scalar(keys %$snmp_result) <= 0) {
149 $label = 'netvision5';
150 $snmp_result = $options{snmp}->get_table(
151 oid => $tables->{$label}->{upsOutput},
152 end => $mapping->{$label}->{percent_load}->{oid},
153 nothing_quit => 1
154 );
155 }
156
157 $self->{oline} = {};
158 foreach my $oid (keys %$snmp_result) {
159 next if ($oid !~ /^$tables->{$label}->{upsOutputEntry}\.\d+\.(.*)$/);
160 my $instance = $1;
161 next if (defined($self->{oline}->{$instance}));
162
163 my $result = $options{snmp}->map_instance(mapping => $mapping->{$label}, results => $snmp_result, instance => $instance);
164 foreach (keys %$result) {
165 delete $result->{$_} if (
166 (defined($self->{option_results}->{ignore_zero_counters}) && $result->{$_} == 0) ||
167 ($result->{$_} == -1 || $result->{$_} == 65535)
168 );
169 }
170 $result->{current} *= 0.1 if (defined($result->{current}));
171 $result->{voltage} *= 0.1 if (defined($result->{voltage}));
172 if (scalar(keys %$result) > 0) {
173 $self->{oline}->{$instance} = { display => $instance, %$result };
174 }
175 }
176
177 $self->{global} = $options{snmp}->map_instance(mapping => $mapping2->{$label}, results => $snmp_result, instance => 0);
178 }
179
180 1;
181
182 __END__
183
184 =head1 MODE
185
186 Check output lines.
187
188 =over 8
189
190 =item B<--ignore-zero-counters>
191
192 Ignore counters equals to 0.
193
194 =item B<--unknown-source-status>
195
196 Define the conditions to match for the status to be UNKNOWN (default: '%{status} =~ /unknown/i').
197 You can use the following variables: %{status}
198
199 =item B<--warning-source-status>
200
201 Define the conditions to match for the status to be WARNING.
202 You can use the following variables: %{status}
203
204 =item B<--critical-source-status>
205
206 Define the conditions to match for the status to be CRITICAL.
207 You can use the following variables: %{status}
208
209 =item B<--warning-*> B<--critical-*>
210
211 Thresholds.
212 Can be: 'load', 'voltage', 'current'.
213
214 =back
215
216 =cut