| 1 |
# |
| 2 |
# Copyright 2024 Centreon (http://www.centreon.com/) |
| 3 |
# |
| 4 |
# Centreon is a full-fledged industry-strength solution that meets |
| 5 |
# the needs in IT infrastructure and application monitoring for |
| 6 |
# service performance. |
| 7 |
# |
| 8 |
# Licensed under the Apache License, Version 2.0 (the "License"); |
| 9 |
# you may not use this file except in compliance with the License. |
| 10 |
# You may obtain a copy of the License at |
| 11 |
# |
| 12 |
# http://www.apache.org/licenses/LICENSE-2.0 |
| 13 |
# |
| 14 |
# Unless required by applicable law or agreed to in writing, software |
| 15 |
# distributed under the License is distributed on an "AS IS" BASIS, |
| 16 |
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| 17 |
# See the License for the specific language governing permissions and |
| 18 |
# limitations under the License. |
| 19 |
# |
| 20 |
|
| 21 |
package hardware::ups::socomec::netvision::snmp::mode::inputlines; |
| 22 |
|
| 23 |
use base qw(centreon::plugins::templates::counter); |
| 24 |
|
| 25 |
use strict; |
| 26 |
use warnings; |
| 27 |
|
| 28 |
sub prefix_iline_output { |
| 29 |
my ($self, %options) = @_; |
| 30 |
|
| 31 |
return "Input line '" . $options{instance_value}->{display} . "' "; |
| 32 |
} |
| 33 |
|
| 34 |
sub set_counters { |
| 35 |
my ($self, %options) = @_; |
| 36 |
|
| 37 |
$self->{maps_counters_type} = [ |
| 38 |
{ name => 'global', type => 0, skipped_code => { -10 => 1 } }, |
| 39 |
{ name => 'iline', type => 1, cb_prefix_output => 'prefix_iline_output', message_multiple => 'All input lines are ok', skipped_code => { -10 => 1 } } |
| 40 |
]; |
| 41 |
|
| 42 |
$self->{maps_counters}->{global} = [ |
| 43 |
{ label => 'frequence', nlabel => 'lines.input.frequence.hertz', set => { |
| 44 |
key_values => [ { name => 'frequency', no_value => 0 } ], |
| 45 |
output_template => 'frequence: %.2f Hz', |
| 46 |
perfdatas => [ |
| 47 |
{ template => '%.2f', unit => 'Hz' } |
| 48 |
] |
| 49 |
} |
| 50 |
} |
| 51 |
]; |
| 52 |
|
| 53 |
$self->{maps_counters}->{iline} = [ |
| 54 |
{ label => 'current', nlabel => 'line.input.current.ampere', set => { |
| 55 |
key_values => [ { name => 'current', no_value => 0 } ], |
| 56 |
output_template => 'current: %.2f A', |
| 57 |
perfdatas => [ |
| 58 |
{ template => '%.2f', min => 0, unit => 'A', label_extra_instance => 1 } |
| 59 |
] |
| 60 |
} |
| 61 |
}, |
| 62 |
{ label => 'voltage', nlabel => 'line.input.voltage.volt', set => { |
| 63 |
key_values => [ { name => 'voltage', no_value => 0 } ], |
| 64 |
output_template => 'voltage: %.2f V', |
| 65 |
perfdatas => [ |
| 66 |
{ template => '%.2f', unit => 'V', label_extra_instance => 1 } |
| 67 |
] |
| 68 |
} |
| 69 |
} |
| 70 |
]; |
| 71 |
} |
| 72 |
|
| 73 |
sub new { |
| 74 |
my ($class, %options) = @_; |
| 75 |
my $self = $class->SUPER::new(package => __PACKAGE__, %options, force_new_perfdata => 1); |
| 76 |
bless $self, $class; |
| 77 |
|
| 78 |
$options{options}->add_options(arguments => { |
| 79 |
}); |
| 80 |
|
| 81 |
return $self; |
| 82 |
} |
| 83 |
|
| 84 |
my $mapping = { |
| 85 |
netvision5 => { |
| 86 |
voltage => { oid => '.1.3.6.1.4.1.4555.1.1.1.1.3.3.1.2' }, # upsInputVoltage (dV) |
| 87 |
current => { oid => '.1.3.6.1.4.1.4555.1.1.1.1.3.3.1.3' } # upsInputCurrent (dA) |
| 88 |
}, |
| 89 |
netvision6 => { |
| 90 |
voltage => { oid => '.1.3.6.1.4.1.4555.1.1.7.1.3.3.1.2' }, # upsInputVoltage (dV) |
| 91 |
current => { oid => '.1.3.6.1.4.1.4555.1.1.7.1.3.3.1.3' } # upsInputCurrent (dA) |
| 92 |
} |
| 93 |
}; |
| 94 |
my $mapping2 = { |
| 95 |
netvision5 => { |
| 96 |
frequency => { oid => '.1.3.6.1.4.1.4555.1.1.1.1.3.2' } # upsInputFrequency (dHZ) |
| 97 |
}, |
| 98 |
netvision6 => { |
| 99 |
frequency => { oid => '.1.3.6.1.4.1.4555.1.1.7.1.3.2' } # upsInputFrequency (dHZ) |
| 100 |
} |
| 101 |
}; |
| 102 |
my $tables = { |
| 103 |
netvision5 => { |
| 104 |
upsInput => '.1.3.6.1.4.1.4555.1.1.1.1.3', |
| 105 |
upsInputEntry => '.1.3.6.1.4.1.4555.1.1.1.1.3.3.1' |
| 106 |
}, |
| 107 |
netvision6 => { |
| 108 |
upsInput => '.1.3.6.1.4.1.4555.1.1.7.1.3', |
| 109 |
upsInputEntry => '.1.3.6.1.4.1.4555.1.1.7.1.3.3.1' |
| 110 |
} |
| 111 |
}; |
| 112 |
|
| 113 |
sub manage_selection { |
| 114 |
my ($self, %options) = @_; |
| 115 |
|
| 116 |
my $label = 'netvision6'; |
| 117 |
my $snmp_result = $options{snmp}->get_table( |
| 118 |
oid => $tables->{$label}->{upsInput}, |
| 119 |
start => $mapping2->{$label}->{frequency}->{oid}, |
| 120 |
end => $mapping->{$label}->{current}->{oid} |
| 121 |
); |
| 122 |
if (scalar(keys %$snmp_result) <= 0) { |
| 123 |
$label = 'netvision5'; |
| 124 |
$snmp_result = $options{snmp}->get_table( |
| 125 |
oid => $tables->{$label}->{upsInput}, |
| 126 |
start => $mapping2->{$label}->{frequency}->{oid}, |
| 127 |
end => $mapping->{$label}->{current}->{oid}, |
| 128 |
nothing_quit => 1 |
| 129 |
); |
| 130 |
} |
| 131 |
|
| 132 |
$self->{iline} = {}; |
| 133 |
foreach my $oid (keys %$snmp_result) { |
| 134 |
next if ($oid !~ /^$tables->{$label}->{upsInputEntry}\.\d+\.(.*)$/); |
| 135 |
my $instance = $1; |
| 136 |
next if (defined($self->{iline}->{$instance})); |
| 137 |
|
| 138 |
my $result = $options{snmp}->map_instance(mapping => $mapping->{$label}, results => $snmp_result, instance => $instance); |
| 139 |
foreach ('current', 'voltage') { |
| 140 |
$result->{$_} = 0 if (defined($result->{$_}) && ( |
| 141 |
$result->{$_} eq '' || $result->{$_} == -1 || $result->{$_} == 65535 || $result->{$_} == 655350)); |
| 142 |
$result->{$_} *= 0.1; |
| 143 |
} |
| 144 |
|
| 145 |
$self->{iline}->{$instance} = { |
| 146 |
display => $instance, |
| 147 |
%$result |
| 148 |
}; |
| 149 |
} |
| 150 |
|
| 151 |
if (scalar(keys %{$self->{iline}}) <= 0) { |
| 152 |
$self->{output}->add_option_msg(short_msg => "No input lines found."); |
| 153 |
$self->{output}->option_exit(); |
| 154 |
} |
| 155 |
|
| 156 |
$self->{global} = $options{snmp}->map_instance(mapping => $mapping2->{$label}, results => $snmp_result, instance => 0); |
| 157 |
$self->{global}->{frequency} = defined($self->{global}->{frequency}) && $self->{global}->{frequency} != -1 && $self->{global}->{frequency} != 65535 |
| 158 |
? ($self->{global}->{frequency} * 0.1) : 0; |
| 159 |
} |
| 160 |
|
| 161 |
1; |
| 162 |
|
| 163 |
__END__ |
| 164 |
|
| 165 |
=head1 MODE |
| 166 |
|
| 167 |
Check Input lines metrics (frequence, voltage, current). |
| 168 |
|
| 169 |
=over 8 |
| 170 |
|
| 171 |
=item B<--warning-*> B<--critical-*> |
| 172 |
|
| 173 |
Thresholds. |
| 174 |
Can be: 'frequence', 'voltage', 'current'. |
| 175 |
|
| 176 |
=back |
| 177 |
|
| 178 |
=cut |