Debian Codegraph @

Install/avr-evtd.config

raw
1 # Sample avr-evtd daemon configuration file
2 # PLEASE EDIT THIS FILE TO SUIT
3 # Debug log file location
4 LOG=/var/log
5 # Advanced use only. Will log events when enabled
6 DEBUG=ON
7 # Set to YES to enable the EM-Mode feature, default no
8 EMMODE=NO
9 # Timed shutdown flag (ON enables timed power down/up only
10 # or use days of the week MONWEDSAT etc
11 # if SHUTDOWN and POWERON are also specified)
12 TIMER=OFF
13 # To override the device scan, specify the desired
14 # serial port connection to the AVR below and remove the
15 # comment
16 #DEVICE=/dev/ttyS1
17 # MACRO day/group switching ON/OFF times in 24hr HH:MM
18 #SUN-SAT=OFF=01:15,ON=06:20
19 # Shutdown (default) time specified in 24hr format HH:MM
20 #SHUTDOWN=
21 # Power on (default) time specified in 24hr format HH:MM
22 #POWERON=
23 # Disk check, set to OFF or a value (0-100) specifying a
24 # percentage used at which the disk LED will illuminate
25 DISKCHECK=90
26 # Specify root partition for disk check, default is none
27 ROOT=sda1
28 # Specify working partition for disk check, default is none
29 WORK=sda3
30 # Disk/AVR refresh rate (seconds), default 40
31 REFRESH=40
32 # Hold time (seconds) for button power-off, default 3
33 HOLD=3
34 # Enable/disable continous disk full messages, default off
35 DISKNAG=OFF
36 # Fan stationary fault timer (seconds), default 30
37 FANSTOP=15