Debian Codegraph @

Install/EventScript

raw
1 #!/bin/bash
2 # avr-evtd Event script
3 #
4 # Sample Event Script written by Bob Perry
5 # NOTE: No longer syncronous with avr-evtd process: maybe more than
6 # one instance of this script running
7 #
8 # Enters via the avr-evtd daemon with the following command options:
9 # 0 - Special event following double press of the 'red' reset button
10 # 1 - AVR device has requested a halt due to error
11 # 2 - Shutdown request from timed shutdown logic
12 # 3 - User has released the power button
13 # 4 - User has pressed the power button
14 # 5 - User has released the 'red' reset button
15 # 6 - User has pressed the reset button
16 # 7 - User has held the power button > 3 seconds
17 # 8 - User has held the reset button > 3 seconds
18 # 9 - Disk used beyond DISKCHECK%
19 # F - Fan failure event, fan stopped for > FANSTOP seconds
20 # E - User selected EM-Mode
21 # S - Five minute shutdown warning event
22 # D - Error message handler
23
24 DEVICE=$2
25
26 PATH=/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin
27 tag=avr-daemon
28 facility=user.info
29
30 #
31 # Populate the configured settings
32 #
33 if [ -f /etc/default/avr-evtd ]; then
34 . /etc/default/avr-evtd
35 fi
36
37 if [ "$DEBUG" = "ON" ] && [ -d "$LOG" ]; then
38 echo "`date` command is $1[$3] for $DEVICE" >> $LOG/avr-evtd.log
39 fi
40
41 case "$1" in
42 0)
43 case "$3" in
44 1) # Indicate this mode by flashing the DISK FULL LED
45 echo -n "YYYY" > $DEVICE
46 # Add an EM IP address or if no ethernet, start it up
47 FAIL=1
48 route -n | grep -q eth0 && FAIL=0
49 if [ "$FAIL" -eq 0 ]; then
50 FAIL=1
51 route -n | grep -q 192.168.11.0 && FAIL=0
52 if [ "$FAIL" -eq 1 ]; then
53 ifconfig eth0:EM 192.168.11.150 netmask 255.255.255.0 up
54 fi
55 else
56 /sbin/ifup --force -a -i /etc/avr-evtd/emergency-eth0
57 sleep 1
58 route add -net 192.168.11.0 netmask 255.255.255.255.0 eth0:EM
59 fi
60 if [ -e /sbin/utelnetd ]; then
61 utelnetd -p 1234 -l /bin/bash &
62 if [ -e /etc/init.d/apservd ]; then
63 chmod +x /etc/init.d/apservd
64 /etc/init.d/apservd start
65 fi
66 fi ;;
67 3) # Flash more lights to indicate we are desperate
68 echo -n "SSSS" > $DEVICE
69 if [ ! -e /etc/passwd.em ]; then cp -f /etc/passwd /etc/passwd.em ; fi
70 if [ ! -e /etc/shadow.em ]; then cp -f /etc/shadow /etc/shadow.em ; fi
71 if [ ! -e /etc/group.em ]; then cp -f /etc/group /etc/group.em ; fi
72 if [ ! -e /etc/gshadow.em ]; then cp -f /etc/gshadow /etc/gshadow.em ; fi
73 if [ ! -e /etc/issue.net.em ]; then cp -f /etc/issue.net /etc/issue.net.em ; fi
74 tar xvf /etc/avr-evtd/recovery.tar
75 ;;
76 *)
77 exit -2
78 ;;
79 esac
80 ;;
81 3)
82 echo -n "[avr-evtd]: Power Button Up"
83 ;;
84 4)
85 echo -n "[avr-evtd]: Power Button Down"
86 ;;
87 5)
88 echo -n "[avr-evtd]: Reset Button Up"
89 ;;
90 6)
91 echo -n "[avr-evtd]: Reset Button Down"
92 ;;
93 1|2|7)
94 echo -n "[avr-evtd]: Shutdown"
95 echo -n "]]]]EEEE" > $DEVICE
96 # Perform shutdown request
97 shutdown -h now
98 ;;
99 8)
100 echo -n "[avr-evtd]: User demanded reset"
101 echo -n "]]]]CCCC" > $DEVICE
102 # Perform reboot
103 reboot
104 ;;
105 9)
106 if [ "$3" -eq 0 ]; then
107 echo -n "[avr-evtd]: Disk usage now safe"
108 else
109 echo -n "[avr-evtd]: Disk used $3% > Monitored $DISKCHECK%"
110 fi
111 ;;
112 E)
113 echo -n "[avr-evtd]: EM mode selected"
114 if [ "$EMMODE" = "YES" ]; then
115 # Determine flash block to use, default to 2
116 if [ -f /proc/mtd ]; then
117 MTD=`cat /proc/mtd | grep mtd_status`
118 BLOCK_ID=${MTD:3:1}
119 if [ -z "$BLOCK_ID" ]; then BLOCK_ID=2 ; fi
120 FLASH=/dev/mtdblock$BLOCK_ID
121 else
122 ls -al /dev/fl3 | grep -q "250,[ ]*3" && FLASH=/dev/fl3
123 fi
124
125 # Flash device available?
126 if [ -n "$FLASH" ]; then
127 # Check we are dealing with a buffered device?
128 if [ ! -b $FLASH ]; then
129 echo "$FLASH device does not exist, no EM-Mode available" >&2
130 else
131 DUMP=`cat $FLASH`
132 STATE=${DUMP:2:4}
133 # Check state is currently NORMAL
134 if [ "$STATE" = "OKOK" ]; then
135 echo -n "NGNGNG" > $FLASH
136 fi
137 echo -n "]]]]CCCC" > $DEVICE
138 /sbin/reboot
139 fi
140 fi
141 fi
142 ;;
143 F)
144 echo -n "[avr-evtd]: Fan failure detected"
145 if [ "$3" -eq 0 ]; then
146 logger -p user.emerg -i 'AVR Detected fan fault'
147 fi
148 if [ "$3" -eq 4 ]; then
149 # Illuminate relevant LED and wait for AVR halt message
150 echo -n "iiii" > $DEVICE
151 fi
152 ;;
153 S)
154 if [ "$3" -gt 100 ]; then
155 MESSAGE="System shutdown in less than 5 minutes"
156 else
157 MESSAGE="Shutdown delayed by $3 minutes"
158 fi
159 # Produce relevant message
160 logger -p user.emerg -i $MESSAGE
161 ;;
162 D)
163 MESSAGE="[$3] Error with configuration file"
164 logger -t $tag -p $facility -i $MESSAGE
165 ;;
166 *)
167 exit 1
168 ;;
169 esac
170
171 exit 0