# Sample avr-evtd daemon configuration file # PLEASE EDIT THIS FILE TO SUIT # Debug log file location LOG=/var/log # Advanced use only. Will log events when enabled DEBUG=ON # Set to YES to enable the EM-Mode feature, default no EMMODE=NO # Timed shutdown flag (ON enables timed power down/up only # or use days of the week MONWEDSAT etc # if SHUTDOWN and POWERON are also specified) TIMER=OFF # To override the device scan, specify the desired # serial port connection to the AVR below and remove the # comment #DEVICE=/dev/ttyS1 # MACRO day/group switching ON/OFF times in 24hr HH:MM #SUN-SAT=OFF=01:15,ON=06:20 # Shutdown (default) time specified in 24hr format HH:MM #SHUTDOWN= # Power on (default) time specified in 24hr format HH:MM #POWERON= # Disk check, set to OFF or a value (0-100) specifying a # percentage used at which the disk LED will illuminate DISKCHECK=90 # Specify root partition for disk check, default is none ROOT=sda1 # Specify working partition for disk check, default is none WORK=sda3 # Disk/AVR refresh rate (seconds), default 40 REFRESH=40 # Hold time (seconds) for button power-off, default 3 HOLD=3 # Enable/disable continous disk full messages, default off DISKNAG=OFF # Fan stationary fault timer (seconds), default 30 FANSTOP=15