| 1 |
/* |
| 2 |
wiring_pulse.c - pulseIn() function |
| 3 |
Part of Arduino - http://www.arduino.cc/ |
| 4 |
|
| 5 |
Copyright (c) 2005-2006 David A. Mellis |
| 6 |
|
| 7 |
This library is free software; you can redistribute it and/or |
| 8 |
modify it under the terms of the GNU Lesser General Public |
| 9 |
License as published by the Free Software Foundation; either |
| 10 |
version 2.1 of the License, or (at your option) any later version. |
| 11 |
|
| 12 |
This library is distributed in the hope that it will be useful, |
| 13 |
but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 14 |
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| 15 |
Lesser General Public License for more details. |
| 16 |
|
| 17 |
You should have received a copy of the GNU Lesser General |
| 18 |
Public License along with this library; if not, write to the |
| 19 |
Free Software Foundation, Inc., 59 Temple Place, Suite 330, |
| 20 |
Boston, MA 02111-1307 USA |
| 21 |
*/ |
| 22 |
|
| 23 |
#include "wiring_private.h" |
| 24 |
#include "pins_arduino.h" |
| 25 |
|
| 26 |
/* Measures the length (in microseconds) of a pulse on the pin; state is HIGH |
| 27 |
* or LOW, the type of pulse to measure. Works on pulses from 2-3 microseconds |
| 28 |
* to 3 minutes in length, but must be called at least a few dozen microseconds |
| 29 |
* before the start of the pulse. |
| 30 |
* |
| 31 |
* This function performs better with short pulses in noInterrupt() context |
| 32 |
*/ |
| 33 |
unsigned long pulseIn(uint8_t pin, uint8_t state, unsigned long timeout) |
| 34 |
{ |
| 35 |
// cache the port and bit of the pin in order to speed up the |
| 36 |
// pulse width measuring loop and achieve finer resolution. calling |
| 37 |
// digitalRead() instead yields much coarser resolution. |
| 38 |
uint8_t bit = digitalPinToBitMask(pin); |
| 39 |
uint8_t port = digitalPinToPort(pin); |
| 40 |
uint8_t stateMask = (state ? bit : 0); |
| 41 |
|
| 42 |
// convert the timeout from microseconds to a number of times through |
| 43 |
// the initial loop; it takes approximately 16 clock cycles per iteration |
| 44 |
unsigned long maxloops = microsecondsToClockCycles(timeout)/16; |
| 45 |
|
| 46 |
unsigned long width = countPulseASM(portInputRegister(port), bit, stateMask, maxloops); |
| 47 |
|
| 48 |
// prevent clockCyclesToMicroseconds to return bogus values if countPulseASM timed out |
| 49 |
if (width) |
| 50 |
return clockCyclesToMicroseconds(width * 16 + 16); |
| 51 |
else |
| 52 |
return 0; |
| 53 |
} |
| 54 |
|
| 55 |
/* Measures the length (in microseconds) of a pulse on the pin; state is HIGH |
| 56 |
* or LOW, the type of pulse to measure. Works on pulses from 2-3 microseconds |
| 57 |
* to 3 minutes in length, but must be called at least a few dozen microseconds |
| 58 |
* before the start of the pulse. |
| 59 |
* |
| 60 |
* ATTENTION: |
| 61 |
* this function relies on micros() so cannot be used in noInterrupt() context |
| 62 |
*/ |
| 63 |
unsigned long pulseInLong(uint8_t pin, uint8_t state, unsigned long timeout) |
| 64 |
{ |
| 65 |
// cache the port and bit of the pin in order to speed up the |
| 66 |
// pulse width measuring loop and achieve finer resolution. calling |
| 67 |
// digitalRead() instead yields much coarser resolution. |
| 68 |
uint8_t bit = digitalPinToBitMask(pin); |
| 69 |
uint8_t port = digitalPinToPort(pin); |
| 70 |
uint8_t stateMask = (state ? bit : 0); |
| 71 |
|
| 72 |
unsigned long startMicros = micros(); |
| 73 |
|
| 74 |
// wait for any previous pulse to end |
| 75 |
while ((*portInputRegister(port) & bit) == stateMask) { |
| 76 |
if (micros() - startMicros > timeout) |
| 77 |
return 0; |
| 78 |
} |
| 79 |
|
| 80 |
// wait for the pulse to start |
| 81 |
while ((*portInputRegister(port) & bit) != stateMask) { |
| 82 |
if (micros() - startMicros > timeout) |
| 83 |
return 0; |
| 84 |
} |
| 85 |
|
| 86 |
unsigned long start = micros(); |
| 87 |
// wait for the pulse to stop |
| 88 |
while ((*portInputRegister(port) & bit) == stateMask) { |
| 89 |
if (micros() - startMicros > timeout) |
| 90 |
return 0; |
| 91 |
} |
| 92 |
return micros() - start; |
| 93 |
} |