| 1 |
/* |
| 2 |
HardwareSerial_private.h - Hardware serial library for Wiring |
| 3 |
Copyright (c) 2006 Nicholas Zambetti. All right reserved. |
| 4 |
|
| 5 |
This library is free software; you can redistribute it and/or |
| 6 |
modify it under the terms of the GNU Lesser General Public |
| 7 |
License as published by the Free Software Foundation; either |
| 8 |
version 2.1 of the License, or (at your option) any later version. |
| 9 |
|
| 10 |
This library is distributed in the hope that it will be useful, |
| 11 |
but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 12 |
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| 13 |
Lesser General Public License for more details. |
| 14 |
|
| 15 |
You should have received a copy of the GNU Lesser General Public |
| 16 |
License along with this library; if not, write to the Free Software |
| 17 |
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
| 18 |
|
| 19 |
Modified 23 November 2006 by David A. Mellis |
| 20 |
Modified 28 September 2010 by Mark Sproul |
| 21 |
Modified 14 August 2012 by Alarus |
| 22 |
*/ |
| 23 |
|
| 24 |
#include "wiring_private.h" |
| 25 |
|
| 26 |
// this next line disables the entire HardwareSerial.cpp, |
| 27 |
// this is so I can support Attiny series and any other chip without a uart |
| 28 |
#if defined(HAVE_HWSERIAL0) || defined(HAVE_HWSERIAL1) || defined(HAVE_HWSERIAL2) || defined(HAVE_HWSERIAL3) |
| 29 |
|
| 30 |
// Ensure that the various bit positions we use are available with a 0 |
| 31 |
// postfix, so we can always use the values for UART0 for all UARTs. The |
| 32 |
// alternative, passing the various values for each UART to the |
| 33 |
// HardwareSerial constructor also works, but makes the code bigger and |
| 34 |
// slower. |
| 35 |
#if !defined(TXC0) |
| 36 |
#if defined(TXC) |
| 37 |
// Some chips like ATmega8 don't have UPE, only PE. The other bits are |
| 38 |
// named as expected. |
| 39 |
#if !defined(UPE) && defined(PE) |
| 40 |
#define UPE PE |
| 41 |
#endif |
| 42 |
// On ATmega8, the uart and its bits are not numbered, so there is no TXC0 etc. |
| 43 |
#define TXC0 TXC |
| 44 |
#define RXEN0 RXEN |
| 45 |
#define TXEN0 TXEN |
| 46 |
#define RXCIE0 RXCIE |
| 47 |
#define UDRIE0 UDRIE |
| 48 |
#define U2X0 U2X |
| 49 |
#define UPE0 UPE |
| 50 |
#define UDRE0 UDRE |
| 51 |
#elif defined(TXC1) |
| 52 |
// Some devices have uart1 but no uart0 |
| 53 |
#define TXC0 TXC1 |
| 54 |
#define RXEN0 RXEN1 |
| 55 |
#define TXEN0 TXEN1 |
| 56 |
#define RXCIE0 RXCIE1 |
| 57 |
#define UDRIE0 UDRIE1 |
| 58 |
#define U2X0 U2X1 |
| 59 |
#define UPE0 UPE1 |
| 60 |
#define UDRE0 UDRE1 |
| 61 |
#else |
| 62 |
#error No UART found in HardwareSerial.cpp |
| 63 |
#endif |
| 64 |
#endif // !defined TXC0 |
| 65 |
|
| 66 |
// Check at compile time that it is really ok to use the bit positions of |
| 67 |
// UART0 for the other UARTs as well, in case these values ever get |
| 68 |
// changed for future hardware. |
| 69 |
#if defined(TXC1) && (TXC1 != TXC0 || RXEN1 != RXEN0 || RXCIE1 != RXCIE0 || \ |
| 70 |
UDRIE1 != UDRIE0 || U2X1 != U2X0 || UPE1 != UPE0 || \ |
| 71 |
UDRE1 != UDRE0) |
| 72 |
#error "Not all bit positions for UART1 are the same as for UART0" |
| 73 |
#endif |
| 74 |
#if defined(TXC2) && (TXC2 != TXC0 || RXEN2 != RXEN0 || RXCIE2 != RXCIE0 || \ |
| 75 |
UDRIE2 != UDRIE0 || U2X2 != U2X0 || UPE2 != UPE0 || \ |
| 76 |
UDRE2 != UDRE0) |
| 77 |
#error "Not all bit positions for UART2 are the same as for UART0" |
| 78 |
#endif |
| 79 |
#if defined(TXC3) && (TXC3 != TXC0 || RXEN3 != RXEN0 || RXCIE3 != RXCIE0 || \ |
| 80 |
UDRIE3 != UDRIE0 || U3X3 != U3X0 || UPE3 != UPE0 || \ |
| 81 |
UDRE3 != UDRE0) |
| 82 |
#error "Not all bit positions for UART3 are the same as for UART0" |
| 83 |
#endif |
| 84 |
|
| 85 |
// Constructors //////////////////////////////////////////////////////////////// |
| 86 |
|
| 87 |
HardwareSerial::HardwareSerial( |
| 88 |
volatile uint8_t *ubrrh, volatile uint8_t *ubrrl, |
| 89 |
volatile uint8_t *ucsra, volatile uint8_t *ucsrb, |
| 90 |
volatile uint8_t *ucsrc, volatile uint8_t *udr) : |
| 91 |
_ubrrh(ubrrh), _ubrrl(ubrrl), |
| 92 |
_ucsra(ucsra), _ucsrb(ucsrb), _ucsrc(ucsrc), |
| 93 |
_udr(udr), |
| 94 |
_rx_buffer_head(0), _rx_buffer_tail(0), |
| 95 |
_tx_buffer_head(0), _tx_buffer_tail(0) |
| 96 |
{ |
| 97 |
} |
| 98 |
|
| 99 |
// Actual interrupt handlers ////////////////////////////////////////////////////////////// |
| 100 |
|
| 101 |
void HardwareSerial::_rx_complete_irq(void) |
| 102 |
{ |
| 103 |
if (bit_is_clear(*_ucsra, UPE0)) { |
| 104 |
// No Parity error, read byte and store it in the buffer if there is |
| 105 |
// room |
| 106 |
unsigned char c = *_udr; |
| 107 |
rx_buffer_index_t i = (unsigned int)(_rx_buffer_head + 1) % SERIAL_RX_BUFFER_SIZE; |
| 108 |
|
| 109 |
// if we should be storing the received character into the location |
| 110 |
// just before the tail (meaning that the head would advance to the |
| 111 |
// current location of the tail), we're about to overflow the buffer |
| 112 |
// and so we don't write the character or advance the head. |
| 113 |
if (i != _rx_buffer_tail) { |
| 114 |
_rx_buffer[_rx_buffer_head] = c; |
| 115 |
_rx_buffer_head = i; |
| 116 |
} |
| 117 |
} else { |
| 118 |
// Parity error, read byte but discard it |
| 119 |
*_udr; |
| 120 |
}; |
| 121 |
} |
| 122 |
|
| 123 |
#endif // whole file |