| 1 |
/* |
| 2 |
wiring.c - Partial implementation of the Wiring API for the ATmega8. |
| 3 |
Part of Arduino - http://www.arduino.cc/ |
| 4 |
|
| 5 |
Copyright (c) 2005-2006 David A. Mellis |
| 6 |
|
| 7 |
This library is free software; you can redistribute it and/or |
| 8 |
modify it under the terms of the GNU Lesser General Public |
| 9 |
License as published by the Free Software Foundation; either |
| 10 |
version 2.1 of the License, or (at your option) any later version. |
| 11 |
|
| 12 |
This library is distributed in the hope that it will be useful, |
| 13 |
but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 14 |
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| 15 |
Lesser General Public License for more details. |
| 16 |
|
| 17 |
You should have received a copy of the GNU Lesser General |
| 18 |
Public License along with this library; if not, write to the |
| 19 |
Free Software Foundation, Inc., 59 Temple Place, Suite 330, |
| 20 |
Boston, MA 02111-1307 USA |
| 21 |
*/ |
| 22 |
|
| 23 |
#include "wiring_private.h" |
| 24 |
|
| 25 |
// the prescaler is set so that timer0 ticks every 64 clock cycles, and the |
| 26 |
// the overflow handler is called every 256 ticks. |
| 27 |
#define MICROSECONDS_PER_TIMER0_OVERFLOW (clockCyclesToMicroseconds(64 * 256)) |
| 28 |
|
| 29 |
// the whole number of milliseconds per timer0 overflow |
| 30 |
#define MILLIS_INC (MICROSECONDS_PER_TIMER0_OVERFLOW / 1000) |
| 31 |
|
| 32 |
// the fractional number of milliseconds per timer0 overflow. we shift right |
| 33 |
// by three to fit these numbers into a byte. (for the clock speeds we care |
| 34 |
// about - 8 and 16 MHz - this doesn't lose precision.) |
| 35 |
#define FRACT_INC ((MICROSECONDS_PER_TIMER0_OVERFLOW % 1000) >> 3) |
| 36 |
#define FRACT_MAX (1000 >> 3) |
| 37 |
|
| 38 |
volatile unsigned long timer0_overflow_count = 0; |
| 39 |
volatile unsigned long timer0_millis = 0; |
| 40 |
static unsigned char timer0_fract = 0; |
| 41 |
|
| 42 |
#if defined(TIM0_OVF_vect) |
| 43 |
ISR(TIM0_OVF_vect) |
| 44 |
#else |
| 45 |
ISR(TIMER0_OVF_vect) |
| 46 |
#endif |
| 47 |
{ |
| 48 |
// copy these to local variables so they can be stored in registers |
| 49 |
// (volatile variables must be read from memory on every access) |
| 50 |
unsigned long m = timer0_millis; |
| 51 |
unsigned char f = timer0_fract; |
| 52 |
|
| 53 |
m += MILLIS_INC; |
| 54 |
f += FRACT_INC; |
| 55 |
if (f >= FRACT_MAX) { |
| 56 |
f -= FRACT_MAX; |
| 57 |
m += 1; |
| 58 |
} |
| 59 |
|
| 60 |
timer0_fract = f; |
| 61 |
timer0_millis = m; |
| 62 |
timer0_overflow_count++; |
| 63 |
} |
| 64 |
|
| 65 |
unsigned long millis() |
| 66 |
{ |
| 67 |
unsigned long m; |
| 68 |
uint8_t oldSREG = SREG; |
| 69 |
|
| 70 |
// disable interrupts while we read timer0_millis or we might get an |
| 71 |
// inconsistent value (e.g. in the middle of a write to timer0_millis) |
| 72 |
cli(); |
| 73 |
m = timer0_millis; |
| 74 |
SREG = oldSREG; |
| 75 |
|
| 76 |
return m; |
| 77 |
} |
| 78 |
|
| 79 |
unsigned long micros() { |
| 80 |
unsigned long m; |
| 81 |
uint8_t oldSREG = SREG, t; |
| 82 |
|
| 83 |
cli(); |
| 84 |
m = timer0_overflow_count; |
| 85 |
#if defined(TCNT0) |
| 86 |
t = TCNT0; |
| 87 |
#elif defined(TCNT0L) |
| 88 |
t = TCNT0L; |
| 89 |
#else |
| 90 |
#error TIMER 0 not defined |
| 91 |
#endif |
| 92 |
|
| 93 |
#ifdef TIFR0 |
| 94 |
if ((TIFR0 & _BV(TOV0)) && (t < 255)) |
| 95 |
m++; |
| 96 |
#else |
| 97 |
if ((TIFR & _BV(TOV0)) && (t < 255)) |
| 98 |
m++; |
| 99 |
#endif |
| 100 |
|
| 101 |
SREG = oldSREG; |
| 102 |
|
| 103 |
return ((m << 8) + t) * (64 / clockCyclesPerMicrosecond()); |
| 104 |
} |
| 105 |
|
| 106 |
void delay(unsigned long ms) |
| 107 |
{ |
| 108 |
uint32_t start = micros(); |
| 109 |
|
| 110 |
while (ms > 0) { |
| 111 |
yield(); |
| 112 |
while ( ms > 0 && (micros() - start) >= 1000) { |
| 113 |
ms--; |
| 114 |
start += 1000; |
| 115 |
} |
| 116 |
} |
| 117 |
} |
| 118 |
|
| 119 |
/* Delay for the given number of microseconds. Assumes a 1, 8, 12, 16, 20 or 24 MHz clock. */ |
| 120 |
void delayMicroseconds(unsigned int us) |
| 121 |
{ |
| 122 |
// call = 4 cycles + 2 to 4 cycles to init us(2 for constant delay, 4 for variable) |
| 123 |
|
| 124 |
// calling avrlib's delay_us() function with low values (e.g. 1 or |
| 125 |
// 2 microseconds) gives delays longer than desired. |
| 126 |
//delay_us(us); |
| 127 |
#if F_CPU >= 24000000L |
| 128 |
// for the 24 MHz clock for the adventurous ones trying to overclock |
| 129 |
|
| 130 |
// zero delay fix |
| 131 |
if (!us) return; // = 3 cycles, (4 when true) |
| 132 |
|
| 133 |
// the following loop takes a 1/6 of a microsecond (4 cycles) |
| 134 |
// per iteration, so execute it six times for each microsecond of |
| 135 |
// delay requested. |
| 136 |
us *= 6; // x6 us, = 7 cycles |
| 137 |
|
| 138 |
// account for the time taken in the preceding commands. |
| 139 |
// we just burned 22 (24) cycles above, remove 5, (5*4=20) |
| 140 |
// us is at least 6 so we can subtract 5 |
| 141 |
us -= 5; //=2 cycles |
| 142 |
|
| 143 |
#elif F_CPU >= 20000000L |
| 144 |
// for the 20 MHz clock on rare Arduino boards |
| 145 |
|
| 146 |
// for a one-microsecond delay, simply return. the overhead |
| 147 |
// of the function call takes 18 (20) cycles, which is 1us |
| 148 |
__asm__ __volatile__ ( |
| 149 |
"nop" "\n\t" |
| 150 |
"nop" "\n\t" |
| 151 |
"nop" "\n\t" |
| 152 |
"nop"); //just waiting 4 cycles |
| 153 |
if (us <= 1) return; // = 3 cycles, (4 when true) |
| 154 |
|
| 155 |
// the following loop takes a 1/5 of a microsecond (4 cycles) |
| 156 |
// per iteration, so execute it five times for each microsecond of |
| 157 |
// delay requested. |
| 158 |
us = (us << 2) + us; // x5 us, = 7 cycles |
| 159 |
|
| 160 |
// account for the time taken in the preceding commands. |
| 161 |
// we just burned 26 (28) cycles above, remove 7, (7*4=28) |
| 162 |
// us is at least 10 so we can subtract 7 |
| 163 |
us -= 7; // 2 cycles |
| 164 |
|
| 165 |
#elif F_CPU >= 16000000L |
| 166 |
// for the 16 MHz clock on most Arduino boards |
| 167 |
|
| 168 |
// for a one-microsecond delay, simply return. the overhead |
| 169 |
// of the function call takes 14 (16) cycles, which is 1us |
| 170 |
if (us <= 1) return; // = 3 cycles, (4 when true) |
| 171 |
|
| 172 |
// the following loop takes 1/4 of a microsecond (4 cycles) |
| 173 |
// per iteration, so execute it four times for each microsecond of |
| 174 |
// delay requested. |
| 175 |
us <<= 2; // x4 us, = 4 cycles |
| 176 |
|
| 177 |
// account for the time taken in the preceding commands. |
| 178 |
// we just burned 19 (21) cycles above, remove 5, (5*4=20) |
| 179 |
// us is at least 8 so we can subtract 5 |
| 180 |
us -= 5; // = 2 cycles, |
| 181 |
|
| 182 |
#elif F_CPU >= 12000000L |
| 183 |
// for the 12 MHz clock if somebody is working with USB |
| 184 |
|
| 185 |
// for a 1 microsecond delay, simply return. the overhead |
| 186 |
// of the function call takes 14 (16) cycles, which is 1.5us |
| 187 |
if (us <= 1) return; // = 3 cycles, (4 when true) |
| 188 |
|
| 189 |
// the following loop takes 1/3 of a microsecond (4 cycles) |
| 190 |
// per iteration, so execute it three times for each microsecond of |
| 191 |
// delay requested. |
| 192 |
us = (us << 1) + us; // x3 us, = 5 cycles |
| 193 |
|
| 194 |
// account for the time taken in the preceding commands. |
| 195 |
// we just burned 20 (22) cycles above, remove 5, (5*4=20) |
| 196 |
// us is at least 6 so we can subtract 5 |
| 197 |
us -= 5; //2 cycles |
| 198 |
|
| 199 |
#elif F_CPU >= 8000000L |
| 200 |
// for the 8 MHz internal clock |
| 201 |
|
| 202 |
// for a 1 and 2 microsecond delay, simply return. the overhead |
| 203 |
// of the function call takes 14 (16) cycles, which is 2us |
| 204 |
if (us <= 2) return; // = 3 cycles, (4 when true) |
| 205 |
|
| 206 |
// the following loop takes 1/2 of a microsecond (4 cycles) |
| 207 |
// per iteration, so execute it twice for each microsecond of |
| 208 |
// delay requested. |
| 209 |
us <<= 1; //x2 us, = 2 cycles |
| 210 |
|
| 211 |
// account for the time taken in the preceding commands. |
| 212 |
// we just burned 17 (19) cycles above, remove 4, (4*4=16) |
| 213 |
// us is at least 6 so we can subtract 4 |
| 214 |
us -= 4; // = 2 cycles |
| 215 |
|
| 216 |
#else |
| 217 |
// for the 1 MHz internal clock (default settings for common Atmega microcontrollers) |
| 218 |
|
| 219 |
// the overhead of the function calls is 14 (16) cycles |
| 220 |
if (us <= 16) return; //= 3 cycles, (4 when true) |
| 221 |
if (us <= 25) return; //= 3 cycles, (4 when true), (must be at least 25 if we want to subtract 22) |
| 222 |
|
| 223 |
// compensate for the time taken by the preceding and next commands (about 22 cycles) |
| 224 |
us -= 22; // = 2 cycles |
| 225 |
// the following loop takes 4 microseconds (4 cycles) |
| 226 |
// per iteration, so execute it us/4 times |
| 227 |
// us is at least 4, divided by 4 gives us 1 (no zero delay bug) |
| 228 |
us >>= 2; // us div 4, = 4 cycles |
| 229 |
|
| 230 |
|
| 231 |
#endif |
| 232 |
|
| 233 |
// busy wait |
| 234 |
__asm__ __volatile__ ( |
| 235 |
"1: sbiw %0,1" "\n\t" // 2 cycles |
| 236 |
"brne 1b" : "=w" (us) : "0" (us) // 2 cycles |
| 237 |
); |
| 238 |
// return = 4 cycles |
| 239 |
} |
| 240 |
|
| 241 |
void init() |
| 242 |
{ |
| 243 |
// this needs to be called before setup() or some functions won't |
| 244 |
// work there |
| 245 |
sei(); |
| 246 |
|
| 247 |
// on the ATmega168, timer 0 is also used for fast hardware pwm |
| 248 |
// (using phase-correct PWM would mean that timer 0 overflowed half as often |
| 249 |
// resulting in different millis() behavior on the ATmega8 and ATmega168) |
| 250 |
#if defined(TCCR0A) && defined(WGM01) |
| 251 |
sbi(TCCR0A, WGM01); |
| 252 |
sbi(TCCR0A, WGM00); |
| 253 |
#endif |
| 254 |
|
| 255 |
// set timer 0 prescale factor to 64 |
| 256 |
#if defined(__AVR_ATmega128__) |
| 257 |
// CPU specific: different values for the ATmega128 |
| 258 |
sbi(TCCR0, CS02); |
| 259 |
#elif defined(TCCR0) && defined(CS01) && defined(CS00) |
| 260 |
// this combination is for the standard atmega8 |
| 261 |
sbi(TCCR0, CS01); |
| 262 |
sbi(TCCR0, CS00); |
| 263 |
#elif defined(TCCR0B) && defined(CS01) && defined(CS00) |
| 264 |
// this combination is for the standard 168/328/1280/2560 |
| 265 |
sbi(TCCR0B, CS01); |
| 266 |
sbi(TCCR0B, CS00); |
| 267 |
#elif defined(TCCR0A) && defined(CS01) && defined(CS00) |
| 268 |
// this combination is for the __AVR_ATmega645__ series |
| 269 |
sbi(TCCR0A, CS01); |
| 270 |
sbi(TCCR0A, CS00); |
| 271 |
#else |
| 272 |
#error Timer 0 prescale factor 64 not set correctly |
| 273 |
#endif |
| 274 |
|
| 275 |
// enable timer 0 overflow interrupt |
| 276 |
#if defined(TIMSK) && defined(TOIE0) |
| 277 |
sbi(TIMSK, TOIE0); |
| 278 |
#elif defined(TIMSK0) && defined(TOIE0) |
| 279 |
sbi(TIMSK0, TOIE0); |
| 280 |
#else |
| 281 |
#error Timer 0 overflow interrupt not set correctly |
| 282 |
#endif |
| 283 |
|
| 284 |
// timers 1 and 2 are used for phase-correct hardware pwm |
| 285 |
// this is better for motors as it ensures an even waveform |
| 286 |
// note, however, that fast pwm mode can achieve a frequency of up |
| 287 |
// 8 MHz (with a 16 MHz clock) at 50% duty cycle |
| 288 |
|
| 289 |
#if defined(TCCR1B) && defined(CS11) && defined(CS10) |
| 290 |
TCCR1B = 0; |
| 291 |
|
| 292 |
// set timer 1 prescale factor to 64 |
| 293 |
sbi(TCCR1B, CS11); |
| 294 |
#if F_CPU >= 8000000L |
| 295 |
sbi(TCCR1B, CS10); |
| 296 |
#endif |
| 297 |
#elif defined(TCCR1) && defined(CS11) && defined(CS10) |
| 298 |
sbi(TCCR1, CS11); |
| 299 |
#if F_CPU >= 8000000L |
| 300 |
sbi(TCCR1, CS10); |
| 301 |
#endif |
| 302 |
#endif |
| 303 |
// put timer 1 in 8-bit phase correct pwm mode |
| 304 |
#if defined(TCCR1A) && defined(WGM10) |
| 305 |
sbi(TCCR1A, WGM10); |
| 306 |
#endif |
| 307 |
|
| 308 |
// set timer 2 prescale factor to 64 |
| 309 |
#if defined(TCCR2) && defined(CS22) |
| 310 |
sbi(TCCR2, CS22); |
| 311 |
#elif defined(TCCR2B) && defined(CS22) |
| 312 |
sbi(TCCR2B, CS22); |
| 313 |
//#else |
| 314 |
// Timer 2 not finished (may not be present on this CPU) |
| 315 |
#endif |
| 316 |
|
| 317 |
// configure timer 2 for phase correct pwm (8-bit) |
| 318 |
#if defined(TCCR2) && defined(WGM20) |
| 319 |
sbi(TCCR2, WGM20); |
| 320 |
#elif defined(TCCR2A) && defined(WGM20) |
| 321 |
sbi(TCCR2A, WGM20); |
| 322 |
//#else |
| 323 |
// Timer 2 not finished (may not be present on this CPU) |
| 324 |
#endif |
| 325 |
|
| 326 |
#if defined(TCCR3B) && defined(CS31) && defined(WGM30) |
| 327 |
sbi(TCCR3B, CS31); // set timer 3 prescale factor to 64 |
| 328 |
sbi(TCCR3B, CS30); |
| 329 |
sbi(TCCR3A, WGM30); // put timer 3 in 8-bit phase correct pwm mode |
| 330 |
#endif |
| 331 |
|
| 332 |
#if defined(TCCR4A) && defined(TCCR4B) && defined(TCCR4D) /* beginning of timer4 block for 32U4 and similar */ |
| 333 |
sbi(TCCR4B, CS42); // set timer4 prescale factor to 64 |
| 334 |
sbi(TCCR4B, CS41); |
| 335 |
sbi(TCCR4B, CS40); |
| 336 |
sbi(TCCR4D, WGM40); // put timer 4 in phase- and frequency-correct PWM mode |
| 337 |
sbi(TCCR4A, PWM4A); // enable PWM mode for comparator OCR4A |
| 338 |
sbi(TCCR4C, PWM4D); // enable PWM mode for comparator OCR4D |
| 339 |
#else /* beginning of timer4 block for ATMEGA1280 and ATMEGA2560 */ |
| 340 |
#if defined(TCCR4B) && defined(CS41) && defined(WGM40) |
| 341 |
sbi(TCCR4B, CS41); // set timer 4 prescale factor to 64 |
| 342 |
sbi(TCCR4B, CS40); |
| 343 |
sbi(TCCR4A, WGM40); // put timer 4 in 8-bit phase correct pwm mode |
| 344 |
#endif |
| 345 |
#endif /* end timer4 block for ATMEGA1280/2560 and similar */ |
| 346 |
|
| 347 |
#if defined(TCCR5B) && defined(CS51) && defined(WGM50) |
| 348 |
sbi(TCCR5B, CS51); // set timer 5 prescale factor to 64 |
| 349 |
sbi(TCCR5B, CS50); |
| 350 |
sbi(TCCR5A, WGM50); // put timer 5 in 8-bit phase correct pwm mode |
| 351 |
#endif |
| 352 |
|
| 353 |
#if defined(ADCSRA) |
| 354 |
// set a2d prescaler so we are inside the desired 50-200 KHz range. |
| 355 |
#if F_CPU >= 16000000 // 16 MHz / 128 = 125 KHz |
| 356 |
sbi(ADCSRA, ADPS2); |
| 357 |
sbi(ADCSRA, ADPS1); |
| 358 |
sbi(ADCSRA, ADPS0); |
| 359 |
#elif F_CPU >= 8000000 // 8 MHz / 64 = 125 KHz |
| 360 |
sbi(ADCSRA, ADPS2); |
| 361 |
sbi(ADCSRA, ADPS1); |
| 362 |
cbi(ADCSRA, ADPS0); |
| 363 |
#elif F_CPU >= 4000000 // 4 MHz / 32 = 125 KHz |
| 364 |
sbi(ADCSRA, ADPS2); |
| 365 |
cbi(ADCSRA, ADPS1); |
| 366 |
sbi(ADCSRA, ADPS0); |
| 367 |
#elif F_CPU >= 2000000 // 2 MHz / 16 = 125 KHz |
| 368 |
sbi(ADCSRA, ADPS2); |
| 369 |
cbi(ADCSRA, ADPS1); |
| 370 |
cbi(ADCSRA, ADPS0); |
| 371 |
#elif F_CPU >= 1000000 // 1 MHz / 8 = 125 KHz |
| 372 |
cbi(ADCSRA, ADPS2); |
| 373 |
sbi(ADCSRA, ADPS1); |
| 374 |
sbi(ADCSRA, ADPS0); |
| 375 |
#else // 128 kHz / 2 = 64 KHz -> This is the closest you can get, the prescaler is 2 |
| 376 |
cbi(ADCSRA, ADPS2); |
| 377 |
cbi(ADCSRA, ADPS1); |
| 378 |
sbi(ADCSRA, ADPS0); |
| 379 |
#endif |
| 380 |
// enable a2d conversions |
| 381 |
sbi(ADCSRA, ADEN); |
| 382 |
#endif |
| 383 |
|
| 384 |
// the bootloader connects pins 0 and 1 to the USART; disconnect them |
| 385 |
// here so they can be used as normal digital i/o; they will be |
| 386 |
// reconnected in Serial.begin() |
| 387 |
#if defined(UCSRB) |
| 388 |
UCSRB = 0; |
| 389 |
#elif defined(UCSR0B) |
| 390 |
UCSR0B = 0; |
| 391 |
#endif |
| 392 |
} |