| 1 |
/* |
| 2 |
* Qualcomm Atheros OUI and vendor specific assignments |
| 3 |
* Copyright (c) 2014-2017, Qualcomm Atheros, Inc. |
| 4 |
* Copyright (c) 2018-2020, The Linux Foundation |
| 5 |
* |
| 6 |
* This software may be distributed under the terms of the BSD license. |
| 7 |
* See README for more details. |
| 8 |
*/ |
| 9 |
|
| 10 |
#ifndef QCA_VENDOR_H |
| 11 |
#define QCA_VENDOR_H |
| 12 |
|
| 13 |
/* |
| 14 |
* This file is a registry of identifier assignments from the Qualcomm Atheros |
| 15 |
* OUI 00:13:74 for purposes other than MAC address assignment. New identifiers |
| 16 |
* can be assigned through normal review process for changes to the upstream |
| 17 |
* hostap.git repository. |
| 18 |
*/ |
| 19 |
|
| 20 |
#define OUI_QCA 0x001374 |
| 21 |
|
| 22 |
#ifndef BIT |
| 23 |
#define BIT(x) (1U << (x)) |
| 24 |
#endif |
| 25 |
|
| 26 |
/** |
| 27 |
* enum qca_radiotap_vendor_ids - QCA radiotap vendor namespace IDs |
| 28 |
*/ |
| 29 |
enum qca_radiotap_vendor_ids { |
| 30 |
QCA_RADIOTAP_VID_WLANTEST = 0, |
| 31 |
}; |
| 32 |
|
| 33 |
/** |
| 34 |
* enum qca_nl80211_vendor_subcmds - QCA nl80211 vendor command identifiers |
| 35 |
* |
| 36 |
* @QCA_NL80211_VENDOR_SUBCMD_UNSPEC: Reserved value 0 |
| 37 |
* |
| 38 |
* @QCA_NL80211_VENDOR_SUBCMD_TEST: Test command/event |
| 39 |
* |
| 40 |
* @QCA_NL80211_VENDOR_SUBCMD_ROAMING: Set roaming policy for drivers that use |
| 41 |
* internal BSS-selection. This command uses |
| 42 |
* @QCA_WLAN_VENDOR_ATTR_ROAMING_POLICY to specify the new roaming policy |
| 43 |
* for the current connection (i.e., changes policy set by the nl80211 |
| 44 |
* Connect command). @QCA_WLAN_VENDOR_ATTR_MAC_ADDR may optionally be |
| 45 |
* included to indicate which BSS to use in case roaming is disabled. |
| 46 |
* |
| 47 |
* @QCA_NL80211_VENDOR_SUBCMD_AVOID_FREQUENCY: Recommendation of frequency |
| 48 |
* ranges to avoid to reduce issues due to interference or internal |
| 49 |
* co-existence information in the driver. These frequencies aim to |
| 50 |
* minimize the traffic but not to totally avoid the traffic. That said |
| 51 |
* for a P2P use case, these frequencies are allowed for the P2P |
| 52 |
* discovery/negotiation but avoid the group to get formed on these |
| 53 |
* frequencies. The event data structure is defined in |
| 54 |
* struct qca_avoid_freq_list. |
| 55 |
* |
| 56 |
* @QCA_NL80211_VENDOR_SUBCMD_DFS_CAPABILITY: Command to check driver support |
| 57 |
* for DFS offloading. |
| 58 |
* |
| 59 |
* @QCA_NL80211_VENDOR_SUBCMD_NAN: NAN command/event which is used to pass |
| 60 |
* NAN Request/Response and NAN Indication messages. These messages are |
| 61 |
* interpreted between the framework and the firmware component. While |
| 62 |
* sending the command from userspace to the driver, payload is not |
| 63 |
* encapsulated inside any attribute. Attribute QCA_WLAN_VENDOR_ATTR_NAN |
| 64 |
* is used when receiving vendor events in userspace from the driver. |
| 65 |
* |
| 66 |
* @QCA_NL80211_VENDOR_SUBCMD_KEY_MGMT_SET_KEY: Set key operation that can be |
| 67 |
* used to configure PMK to the driver even when not connected. This can |
| 68 |
* be used to request offloading of key management operations. Only used |
| 69 |
* if device supports QCA_WLAN_VENDOR_FEATURE_KEY_MGMT_OFFLOAD. |
| 70 |
* |
| 71 |
* @QCA_NL80211_VENDOR_SUBCMD_KEY_MGMT_ROAM_AUTH: An extended version of |
| 72 |
* NL80211_CMD_ROAM event with optional attributes including information |
| 73 |
* from offloaded key management operation. Uses |
| 74 |
* enum qca_wlan_vendor_attr_roam_auth attributes. Only used |
| 75 |
* if device supports QCA_WLAN_VENDOR_FEATURE_KEY_MGMT_OFFLOAD. |
| 76 |
* |
| 77 |
* @QCA_NL80211_VENDOR_SUBCMD_DO_ACS: ACS command/event which is used to |
| 78 |
* invoke the ACS function in device and pass selected channels to |
| 79 |
* hostapd. Uses enum qca_wlan_vendor_attr_acs_offload attributes. |
| 80 |
* |
| 81 |
* @QCA_NL80211_VENDOR_SUBCMD_GET_FEATURES: Command to get the features |
| 82 |
* supported by the driver. enum qca_wlan_vendor_features defines |
| 83 |
* the possible features. |
| 84 |
* |
| 85 |
* @QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_CAC_STARTED: Event used by driver, |
| 86 |
* which supports DFS offloading, to indicate a channel availability check |
| 87 |
* start. |
| 88 |
* |
| 89 |
* @QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_CAC_FINISHED: Event used by driver, |
| 90 |
* which supports DFS offloading, to indicate a channel availability check |
| 91 |
* completion. |
| 92 |
* |
| 93 |
* @QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_CAC_ABORTED: Event used by driver, |
| 94 |
* which supports DFS offloading, to indicate that the channel availability |
| 95 |
* check aborted, no change to the channel status. |
| 96 |
* |
| 97 |
* @QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_CAC_NOP_FINISHED: Event used by |
| 98 |
* driver, which supports DFS offloading, to indicate that the |
| 99 |
* Non-Occupancy Period for this channel is over, channel becomes usable. |
| 100 |
* |
| 101 |
* @QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_RADAR_DETECTED: Event used by driver, |
| 102 |
* which supports DFS offloading, to indicate a radar pattern has been |
| 103 |
* detected. The channel is now unusable. |
| 104 |
* |
| 105 |
* @QCA_NL80211_VENDOR_SUBCMD_GET_WIFI_INFO: Get information from the driver. |
| 106 |
* Attributes defined in enum qca_wlan_vendor_attr_get_wifi_info. |
| 107 |
* |
| 108 |
* @QCA_NL80211_VENDOR_SUBCMD_GET_LOGGER_FEATURE_SET: Get the feature bitmap |
| 109 |
* based on enum wifi_logger_supported_features. Attributes defined in |
| 110 |
* enum qca_wlan_vendor_attr_get_logger_features. |
| 111 |
* |
| 112 |
* @QCA_NL80211_VENDOR_SUBCMD_GET_RING_DATA: Get the ring data from a particular |
| 113 |
* logger ring, QCA_WLAN_VENDOR_ATTR_WIFI_LOGGER_RING_ID is passed as the |
| 114 |
* attribute for this command. Attributes defined in |
| 115 |
* enum qca_wlan_vendor_attr_wifi_logger_start. |
| 116 |
* |
| 117 |
* @QCA_NL80211_VENDOR_SUBCMD_TDLS_GET_CAPABILITIES: Get the supported TDLS |
| 118 |
* capabilities of the driver, parameters includes the attributes defined |
| 119 |
* in enum qca_wlan_vendor_attr_tdls_get_capabilities. |
| 120 |
* |
| 121 |
* @QCA_NL80211_VENDOR_SUBCMD_OFFLOADED_PACKETS: Vendor command used to offload |
| 122 |
* sending of certain periodic IP packet to firmware, attributes defined in |
| 123 |
* enum qca_wlan_vendor_attr_offloaded_packets. |
| 124 |
* |
| 125 |
* @QCA_NL80211_VENDOR_SUBCMD_MONITOR_RSSI: Command used to configure RSSI |
| 126 |
* monitoring, defines min and max RSSI which are configured for RSSI |
| 127 |
* monitoring. Also used to notify the RSSI breach and provides the BSSID |
| 128 |
* and RSSI value that was breached. Attributes defined in |
| 129 |
* enum qca_wlan_vendor_attr_rssi_monitoring. |
| 130 |
* |
| 131 |
* @QCA_NL80211_VENDOR_SUBCMD_NDP: Command used for performing various NAN |
| 132 |
* Data Path (NDP) related operations, attributes defined in |
| 133 |
* enum qca_wlan_vendor_attr_ndp_params. |
| 134 |
* |
| 135 |
* @QCA_NL80211_VENDOR_SUBCMD_ND_OFFLOAD: Command used to enable/disable |
| 136 |
* Neighbour Discovery offload, attributes defined in |
| 137 |
* enum qca_wlan_vendor_attr_nd_offload. |
| 138 |
* |
| 139 |
* @QCA_NL80211_VENDOR_SUBCMD_PACKET_FILTER: Used to set/get the various |
| 140 |
* configuration parameter for BPF packet filter, attributes defined in |
| 141 |
* enum qca_wlan_vendor_attr_packet_filter. |
| 142 |
* |
| 143 |
* @QCA_NL80211_VENDOR_SUBCMD_GET_BUS_SIZE: Gets the driver-firmware |
| 144 |
* maximum supported size, attributes defined in |
| 145 |
* enum qca_wlan_vendor_drv_info. |
| 146 |
* |
| 147 |
* @QCA_NL80211_VENDOR_SUBCMD_GET_WAKE_REASON_STATS: Command to get various |
| 148 |
* data about wake reasons and datapath IP statistics, attributes defined |
| 149 |
* in enum qca_wlan_vendor_attr_wake_stats. |
| 150 |
* |
| 151 |
* @QCA_NL80211_VENDOR_SUBCMD_OCB_SET_CONFIG: Command used to set configuration |
| 152 |
* for IEEE 802.11 communicating outside the context of a basic service |
| 153 |
* set, called OCB command. Uses the attributes defines in |
| 154 |
* enum qca_wlan_vendor_attr_ocb_set_config. |
| 155 |
* |
| 156 |
* @QCA_NL80211_VENDOR_SUBCMD_OCB_SET_UTC_TIME: Command used to set OCB |
| 157 |
* UTC time. Use the attributes defines in |
| 158 |
* enum qca_wlan_vendor_attr_ocb_set_utc_time. |
| 159 |
* |
| 160 |
* @QCA_NL80211_VENDOR_SUBCMD_OCB_START_TIMING_ADVERT: Command used to start |
| 161 |
* sending OCB timing advert frames. Uses the attributes defines in |
| 162 |
* enum qca_wlan_vendor_attr_ocb_start_timing_advert. |
| 163 |
* |
| 164 |
* @QCA_NL80211_VENDOR_SUBCMD_OCB_STOP_TIMING_ADVERT: Command used to stop |
| 165 |
* OCB timing advert. Uses the attributes defines in |
| 166 |
* enum qca_wlan_vendor_attr_ocb_stop_timing_advert. |
| 167 |
* |
| 168 |
* @QCA_NL80211_VENDOR_SUBCMD_OCB_GET_TSF_TIMER: Command used to get TSF |
| 169 |
* timer value. Uses the attributes defines in |
| 170 |
* enum qca_wlan_vendor_attr_ocb_get_tsf_resp. |
| 171 |
* |
| 172 |
* @QCA_NL80211_VENDOR_SUBCMD_LINK_PROPERTIES: Command/event to update the |
| 173 |
* link properties of the respective interface. As an event, is used |
| 174 |
* to notify the connected station's status. The attributes for this |
| 175 |
* command are defined in enum qca_wlan_vendor_attr_link_properties. |
| 176 |
* |
| 177 |
* @QCA_NL80211_VENDOR_SUBCMD_SETBAND: Command to configure the enabled band(s) |
| 178 |
* to the driver. This command sets the band(s) through either the |
| 179 |
* attribute QCA_WLAN_VENDOR_ATTR_SETBAND_VALUE or |
| 180 |
* QCA_WLAN_VENDOR_ATTR_SETBAND_MASK (or both). |
| 181 |
* QCA_WLAN_VENDOR_ATTR_SETBAND_VALUE refers enum qca_set_band as unsigned |
| 182 |
* integer values and QCA_WLAN_VENDOR_ATTR_SETBAND_MASK refers it as 32 |
| 183 |
* bit unsigned bitmask values. The allowed values for |
| 184 |
* QCA_WLAN_VENDOR_ATTR_SETBAND_VALUE are limited to QCA_SETBAND_AUTO, |
| 185 |
* QCA_SETBAND_5G, and QCA_SETBAND_2G. Other values/bitmasks are valid for |
| 186 |
* QCA_WLAN_VENDOR_ATTR_SETBAND_MASK. The attribute |
| 187 |
* QCA_WLAN_VENDOR_ATTR_SETBAND_VALUE is deprecated and the recommendation |
| 188 |
* is to use the QCA_WLAN_VENDOR_ATTR_SETBAND_MASK. If the both attributes |
| 189 |
* are included for backwards compatibility, the configurations through |
| 190 |
* QCA_WLAN_VENDOR_ATTR_SETBAND_MASK will take the precedence with drivers |
| 191 |
* that support both attributes. |
| 192 |
* |
| 193 |
* @QCA_NL80211_VENDOR_SUBCMD_ACS_POLICY: This command is used to configure |
| 194 |
* DFS policy and channel hint for ACS operation. This command uses the |
| 195 |
* attributes defined in enum qca_wlan_vendor_attr_acs_config and |
| 196 |
* enum qca_acs_dfs_mode. |
| 197 |
* |
| 198 |
* @QCA_NL80211_VENDOR_SUBCMD_P2P_LISTEN_OFFLOAD_START: Command used to |
| 199 |
* start the P2P Listen offload function in device and pass the listen |
| 200 |
* channel, period, interval, count, device types, and vendor specific |
| 201 |
* information elements to the device driver and firmware. |
| 202 |
* Uses the attributes defines in |
| 203 |
* enum qca_wlan_vendor_attr_p2p_listen_offload. |
| 204 |
* |
| 205 |
* @QCA_NL80211_VENDOR_SUBCMD_P2P_LISTEN_OFFLOAD_STOP: Command/event used to |
| 206 |
* indicate stop request/response of the P2P Listen offload function in |
| 207 |
* device. As an event, it indicates either the feature stopped after it |
| 208 |
* was already running or feature has actually failed to start. Uses the |
| 209 |
* attributes defines in enum qca_wlan_vendor_attr_p2p_listen_offload. |
| 210 |
* |
| 211 |
* @QCA_NL80211_VENDOR_SUBCMD_SAP_CONDITIONAL_CHAN_SWITCH: After AP starts |
| 212 |
* beaconing, this sub command provides the driver, the frequencies on the |
| 213 |
* 5 GHz band to check for any radar activity. Driver selects one channel |
| 214 |
* from this priority list provided through |
| 215 |
* @QCA_WLAN_VENDOR_ATTR_SAP_CONDITIONAL_CHAN_SWITCH_FREQ_LIST and starts |
| 216 |
* to check for radar activity on it. If no radar activity is detected |
| 217 |
* during the channel availability check period, driver internally switches |
| 218 |
* to the selected frequency of operation. If the frequency is zero, driver |
| 219 |
* internally selects a channel. The status of this conditional switch is |
| 220 |
* indicated through an event using the same sub command through |
| 221 |
* @QCA_WLAN_VENDOR_ATTR_SAP_CONDITIONAL_CHAN_SWITCH_STATUS. Attributes are |
| 222 |
* listed in qca_wlan_vendor_attr_sap_conditional_chan_switch. |
| 223 |
* |
| 224 |
* @QCA_NL80211_VENDOR_SUBCMD_GPIO_CONFIG_COMMAND: Set GPIO pins. This uses the |
| 225 |
* attributes defined in enum qca_wlan_gpio_attr. |
| 226 |
* |
| 227 |
* @QCA_NL80211_VENDOR_SUBCMD_GET_HW_CAPABILITY: Fetch hardware capabilities. |
| 228 |
* This uses @QCA_WLAN_VENDOR_ATTR_GET_HW_CAPABILITY to indicate which |
| 229 |
* capabilities are to be fetched and other |
| 230 |
* enum qca_wlan_vendor_attr_get_hw_capability attributes to return the |
| 231 |
* requested capabilities. |
| 232 |
* |
| 233 |
* @QCA_NL80211_VENDOR_SUBCMD_LL_STATS_EXT: Link layer statistics extension. |
| 234 |
* enum qca_wlan_vendor_attr_ll_stats_ext attributes are used with this |
| 235 |
* command and event. |
| 236 |
* |
| 237 |
* @QCA_NL80211_VENDOR_SUBCMD_LOC_GET_CAPA: Get capabilities for |
| 238 |
* indoor location features. Capabilities are reported in |
| 239 |
* QCA_WLAN_VENDOR_ATTR_LOC_CAPA. |
| 240 |
* |
| 241 |
* @QCA_NL80211_VENDOR_SUBCMD_FTM_START_SESSION: Start an FTM |
| 242 |
* (fine timing measurement) session with one or more peers. |
| 243 |
* Specify Session cookie in QCA_WLAN_VENDOR_ATTR_FTM_SESSION_COOKIE and |
| 244 |
* peer information in QCA_WLAN_VENDOR_ATTR_FTM_MEAS_PEERS. |
| 245 |
* On success, 0 or more QCA_NL80211_VENDOR_SUBCMD_FTM_MEAS_RESULT |
| 246 |
* events will be reported, followed by |
| 247 |
* QCA_NL80211_VENDOR_SUBCMD_FTM_SESSION_DONE event to indicate |
| 248 |
* end of session. |
| 249 |
* Refer to IEEE P802.11-REVmc/D7.0, 11.24.6 |
| 250 |
* |
| 251 |
* @QCA_NL80211_VENDOR_SUBCMD_FTM_ABORT_SESSION: Abort a running session. |
| 252 |
* A QCA_NL80211_VENDOR_SUBCMD_FTM_SESSION_DONE will be reported with |
| 253 |
* status code indicating session was aborted. |
| 254 |
* |
| 255 |
* @QCA_NL80211_VENDOR_SUBCMD_FTM_MEAS_RESULT: Event with measurement |
| 256 |
* results for one peer. Results are reported in |
| 257 |
* QCA_WLAN_VENDOR_ATTR_FTM_MEAS_PEER_RESULTS. |
| 258 |
* |
| 259 |
* @QCA_NL80211_VENDOR_SUBCMD_FTM_SESSION_DONE: Event triggered when |
| 260 |
* FTM session is finished, either successfully or aborted by |
| 261 |
* request. |
| 262 |
* |
| 263 |
* @QCA_NL80211_VENDOR_SUBCMD_FTM_CFG_RESPONDER: Configure FTM responder |
| 264 |
* mode. QCA_WLAN_VENDOR_ATTR_FTM_RESPONDER_ENABLE specifies whether |
| 265 |
* to enable or disable the responder. LCI/LCR reports can be |
| 266 |
* configured with QCA_WLAN_VENDOR_ATTR_FTM_LCI and |
| 267 |
* QCA_WLAN_VENDOR_ATTR_FTM_LCR. Can be called multiple |
| 268 |
* times to update the LCI/LCR reports. |
| 269 |
* |
| 270 |
* @QCA_NL80211_VENDOR_SUBCMD_AOA_MEAS: Perform a standalone AOA (angle of |
| 271 |
* arrival) measurement with a single peer. Specify peer MAC address in |
| 272 |
* QCA_WLAN_VENDOR_ATTR_MAC_ADDR and optionally frequency (MHz) in |
| 273 |
* QCA_WLAN_VENDOR_ATTR_FREQ (if not specified, locate peer in kernel |
| 274 |
* scan results cache and use the frequency from there). |
| 275 |
* Also specify measurement type in QCA_WLAN_VENDOR_ATTR_AOA_TYPE. |
| 276 |
* Measurement result is reported in |
| 277 |
* QCA_NL80211_VENDOR_SUBCMD_AOA_MEAS_RESULT event. |
| 278 |
* |
| 279 |
* @QCA_NL80211_VENDOR_SUBCMD_AOA_ABORT_MEAS: Abort an AOA measurement. Specify |
| 280 |
* peer MAC address in QCA_WLAN_VENDOR_ATTR_MAC_ADDR. |
| 281 |
* |
| 282 |
* @QCA_NL80211_VENDOR_SUBCMD_AOA_MEAS_RESULT: Event that reports |
| 283 |
* the AOA measurement result. |
| 284 |
* Peer MAC address reported in QCA_WLAN_VENDOR_ATTR_MAC_ADDR. |
| 285 |
* success/failure status is reported in |
| 286 |
* QCA_WLAN_VENDOR_ATTR_LOC_SESSION_STATUS. |
| 287 |
* Measurement data is reported in QCA_WLAN_VENDOR_ATTR_AOA_MEAS_RESULT. |
| 288 |
* The antenna array(s) used in the measurement are reported in |
| 289 |
* QCA_WLAN_VENDOR_ATTR_LOC_ANTENNA_ARRAY_MASK. |
| 290 |
* |
| 291 |
* @QCA_NL80211_VENDOR_SUBCMD_ENCRYPTION_TEST: Encrypt/decrypt the given |
| 292 |
* data as per the given parameters. |
| 293 |
* |
| 294 |
* @QCA_NL80211_VENDOR_SUBCMD_GET_CHAIN_RSSI: Get antenna RSSI value for a |
| 295 |
* specific chain. |
| 296 |
* |
| 297 |
* @QCA_NL80211_VENDOR_SUBCMD_DMG_RF_GET_SECTOR_CFG: Get low level |
| 298 |
* configuration for a DMG RF sector. Specify sector index in |
| 299 |
* QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_INDEX, sector type in |
| 300 |
* QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_TYPE and RF modules |
| 301 |
* to return sector information for in |
| 302 |
* QCA_WLAN_VENDOR_ATTR_DMG_RF_MODULE_MASK. Returns sector configuration |
| 303 |
* in QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG. Also return the |
| 304 |
* exact time where information was captured in |
| 305 |
* QCA_WLAN_VENDOR_ATTR_TSF. |
| 306 |
* |
| 307 |
* @QCA_NL80211_VENDOR_SUBCMD_DMG_RF_SET_SECTOR_CFG: Set low level |
| 308 |
* configuration for a DMG RF sector. Specify sector index in |
| 309 |
* QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_INDEX, sector type in |
| 310 |
* QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_TYPE and sector configuration |
| 311 |
* for one or more DMG RF modules in |
| 312 |
* QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG. |
| 313 |
* |
| 314 |
* @QCA_NL80211_VENDOR_SUBCMD_DMG_RF_GET_SELECTED_SECTOR: Get selected |
| 315 |
* DMG RF sector for a station. This is the sector that the HW |
| 316 |
* will use to communicate with the station. Specify the MAC address |
| 317 |
* of associated station/AP/PCP in QCA_WLAN_VENDOR_ATTR_MAC_ADDR (not |
| 318 |
* needed for unassociated station). Specify sector type to return in |
| 319 |
* QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_TYPE. Returns the selected |
| 320 |
* sector index in QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_INDEX. |
| 321 |
* Also return the exact time where the information was captured |
| 322 |
* in QCA_WLAN_VENDOR_ATTR_TSF. |
| 323 |
* |
| 324 |
* @QCA_NL80211_VENDOR_SUBCMD_DMG_RF_SET_SELECTED_SECTOR: Set the |
| 325 |
* selected DMG RF sector for a station. This is the sector that |
| 326 |
* the HW will use to communicate with the station. |
| 327 |
* Specify the MAC address of associated station/AP/PCP in |
| 328 |
* QCA_WLAN_VENDOR_ATTR_MAC_ADDR, the sector type to select in |
| 329 |
* QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_TYPE and the sector index |
| 330 |
* in QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_INDEX. |
| 331 |
* The selected sector will be locked such that it will not be |
| 332 |
* modified like it normally does (for example when station |
| 333 |
* moves around). To unlock the selected sector for a station |
| 334 |
* pass the special value 0xFFFF in the sector index. To unlock |
| 335 |
* all connected stations also pass a broadcast MAC address. |
| 336 |
* |
| 337 |
* @QCA_NL80211_VENDOR_SUBCMD_CONFIGURE_TDLS: Configure the TDLS behavior |
| 338 |
* in the host driver. The different TDLS configurations are defined |
| 339 |
* by the attributes in enum qca_wlan_vendor_attr_tdls_configuration. |
| 340 |
* |
| 341 |
* @QCA_NL80211_VENDOR_SUBCMD_GET_HE_CAPABILITIES: Query device IEEE 802.11ax HE |
| 342 |
* capabilities. The response uses the attributes defined in |
| 343 |
* enum qca_wlan_vendor_attr_get_he_capabilities. |
| 344 |
* |
| 345 |
* @QCA_NL80211_VENDOR_SUBCMD_ABORT_SCAN: Abort an ongoing vendor scan that was |
| 346 |
* started with QCA_NL80211_VENDOR_SUBCMD_TRIGGER_SCAN. This command |
| 347 |
* carries the scan cookie of the corresponding scan request. The scan |
| 348 |
* cookie is represented by QCA_WLAN_VENDOR_ATTR_SCAN_COOKIE. |
| 349 |
* |
| 350 |
* @QCA_NL80211_VENDOR_SUBCMD_SET_SAR_LIMITS: Set the Specific |
| 351 |
* Absorption Rate (SAR) power limits. A critical regulation for |
| 352 |
* FCC compliance, OEMs require methods to set SAR limits on TX |
| 353 |
* power of WLAN/WWAN. enum qca_vendor_attr_sar_limits |
| 354 |
* attributes are used with this command. |
| 355 |
* |
| 356 |
* @QCA_NL80211_VENDOR_SUBCMD_EXTERNAL_ACS: This command/event is used by the |
| 357 |
* host driver for offloading the implementation of Auto Channel Selection |
| 358 |
* (ACS) to an external user space entity. This interface is used as the |
| 359 |
* event from the host driver to the user space entity and also as the |
| 360 |
* request from the user space entity to the host driver. The event from |
| 361 |
* the host driver is used by the user space entity as an indication to |
| 362 |
* start the ACS functionality. The attributes used by this event are |
| 363 |
* represented by the enum qca_wlan_vendor_attr_external_acs_event. |
| 364 |
* User space entity uses the same interface to inform the host driver with |
| 365 |
* selected channels after the ACS operation using the attributes defined |
| 366 |
* by enum qca_wlan_vendor_attr_external_acs_channels. |
| 367 |
* |
| 368 |
* @QCA_NL80211_VENDOR_SUBCMD_CHIP_PWRSAVE_FAILURE: Vendor event carrying the |
| 369 |
* requisite information leading to a power save failure. The information |
| 370 |
* carried as part of this event is represented by the |
| 371 |
* enum qca_attr_chip_power_save_failure attributes. |
| 372 |
* |
| 373 |
* @QCA_NL80211_VENDOR_SUBCMD_NUD_STATS_SET: Start/Stop the NUD statistics |
| 374 |
* collection. Uses attributes defined in enum qca_attr_nud_stats_set. |
| 375 |
* |
| 376 |
* @QCA_NL80211_VENDOR_SUBCMD_NUD_STATS_GET: Get the NUD statistics. These |
| 377 |
* statistics are represented by the enum qca_attr_nud_stats_get |
| 378 |
* attributes. |
| 379 |
* |
| 380 |
* @QCA_NL80211_VENDOR_SUBCMD_FETCH_BSS_TRANSITION_STATUS: Sub-command to fetch |
| 381 |
* the BSS transition status, whether accept or reject, for a list of |
| 382 |
* candidate BSSIDs provided by the userspace. This uses the vendor |
| 383 |
* attributes QCA_WLAN_VENDOR_ATTR_BTM_MBO_TRANSITION_REASON and |
| 384 |
* QCA_WLAN_VENDOR_ATTR_BTM_CANDIDATE_INFO. The userspace shall specify |
| 385 |
* the attributes QCA_WLAN_VENDOR_ATTR_BTM_MBO_TRANSITION_REASON and an |
| 386 |
* array of QCA_WLAN_VENDOR_ATTR_BTM_CANDIDATE_INFO_BSSID nested in |
| 387 |
* QCA_WLAN_VENDOR_ATTR_BTM_CANDIDATE_INFO in the request. In the response |
| 388 |
* the driver shall specify array of |
| 389 |
* QCA_WLAN_VENDOR_ATTR_BTM_CANDIDATE_INFO_BSSID and |
| 390 |
* QCA_WLAN_VENDOR_ATTR_BTM_CANDIDATE_INFO_STATUS pairs nested in |
| 391 |
* QCA_WLAN_VENDOR_ATTR_BTM_CANDIDATE_INFO. |
| 392 |
* |
| 393 |
* @QCA_NL80211_VENDOR_SUBCMD_SET_TRACE_LEVEL: Set the trace level for a |
| 394 |
* specific QCA module. The trace levels are represented by |
| 395 |
* enum qca_attr_trace_level attributes. |
| 396 |
* |
| 397 |
* @QCA_NL80211_VENDOR_SUBCMD_BRP_SET_ANT_LIMIT: Set the Beam Refinement |
| 398 |
* Protocol antenna limit in different modes. See enum |
| 399 |
* qca_wlan_vendor_attr_brp_ant_limit_mode. |
| 400 |
* |
| 401 |
* @QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_START: Start spectral scan. The scan |
| 402 |
* parameters are specified by enum qca_wlan_vendor_attr_spectral_scan. |
| 403 |
* This returns a cookie (%QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_COOKIE) |
| 404 |
* identifying the operation in success case. In failure cases an |
| 405 |
* error code (%QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_ERROR_CODE) |
| 406 |
* describing the reason for the failure is returned. |
| 407 |
* |
| 408 |
* @QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_STOP: Stop spectral scan. This uses |
| 409 |
* a cookie (%QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_COOKIE) from |
| 410 |
* @QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_START to identify the scan to |
| 411 |
* be stopped. |
| 412 |
* |
| 413 |
* @QCA_NL80211_VENDOR_SUBCMD_ACTIVE_TOS: Set the active Type Of Service on the |
| 414 |
* specific interface. This can be used to modify some of the low level |
| 415 |
* scan parameters (off channel dwell time, home channel time) in the |
| 416 |
* driver/firmware. These parameters are maintained within the host driver. |
| 417 |
* This command is valid only when the interface is in the connected state. |
| 418 |
* These scan parameters shall be reset by the driver/firmware once |
| 419 |
* disconnected. The attributes used with this command are defined in |
| 420 |
* enum qca_wlan_vendor_attr_active_tos. |
| 421 |
* |
| 422 |
* @QCA_NL80211_VENDOR_SUBCMD_HANG: Event indicating to the user space that the |
| 423 |
* driver has detected an internal failure. This event carries the |
| 424 |
* information indicating the reason that triggered this detection. The |
| 425 |
* attributes for this command are defined in |
| 426 |
* enum qca_wlan_vendor_attr_hang. |
| 427 |
* |
| 428 |
* @QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_CONFIG: Get the current values |
| 429 |
* of spectral parameters used. The spectral scan parameters are specified |
| 430 |
* by enum qca_wlan_vendor_attr_spectral_scan. |
| 431 |
* |
| 432 |
* @QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_DIAG_STATS: Get the debug stats |
| 433 |
* for spectral scan functionality. The debug stats are specified by |
| 434 |
* enum qca_wlan_vendor_attr_spectral_diag_stats. |
| 435 |
* |
| 436 |
* @QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_CAP_INFO: Get spectral |
| 437 |
* scan system capabilities. The capabilities are specified |
| 438 |
* by enum qca_wlan_vendor_attr_spectral_cap. |
| 439 |
* |
| 440 |
* @QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_STATUS: Get the current |
| 441 |
* status of spectral scan. The status values are specified |
| 442 |
* by enum qca_wlan_vendor_attr_spectral_scan_status. |
| 443 |
* |
| 444 |
* @QCA_NL80211_VENDOR_SUBCMD_PEER_FLUSH_PENDING: Sub-command to flush |
| 445 |
* peer pending packets. Specify the peer MAC address in |
| 446 |
* QCA_WLAN_VENDOR_ATTR_PEER_ADDR and the access category of the packets |
| 447 |
* in QCA_WLAN_VENDOR_ATTR_AC. The attributes are listed |
| 448 |
* in enum qca_wlan_vendor_attr_flush_pending. |
| 449 |
* |
| 450 |
* @QCA_NL80211_VENDOR_SUBCMD_GET_RROP_INFO: Get vendor specific Representative |
| 451 |
* RF Operating Parameter (RROP) information. The attributes for this |
| 452 |
* information are defined in enum qca_wlan_vendor_attr_rrop_info. This is |
| 453 |
* intended for use by external Auto Channel Selection applications. |
| 454 |
* |
| 455 |
* @QCA_NL80211_VENDOR_SUBCMD_GET_SAR_LIMITS: Get the Specific Absorption Rate |
| 456 |
* (SAR) power limits. This is a companion to the command |
| 457 |
* @QCA_NL80211_VENDOR_SUBCMD_SET_SAR_LIMITS and is used to retrieve the |
| 458 |
* settings currently in use. The attributes returned by this command are |
| 459 |
* defined by enum qca_vendor_attr_sar_limits. |
| 460 |
* |
| 461 |
* @QCA_NL80211_VENDOR_SUBCMD_WLAN_MAC_INFO: Provides the current behavior of |
| 462 |
* the WLAN hardware MAC. Also, provides the WLAN netdev interface |
| 463 |
* information attached to the respective MAC. |
| 464 |
* This works both as a query (user space asks the current mode) or event |
| 465 |
* interface (driver advertising the current mode to the user space). |
| 466 |
* Driver does not trigger this event for temporary hardware mode changes. |
| 467 |
* Mode changes w.r.t Wi-Fi connection update (VIZ creation / deletion, |
| 468 |
* channel change, etc.) are updated with this event. Attributes for this |
| 469 |
* interface are defined in enum qca_wlan_vendor_attr_mac. |
| 470 |
* |
| 471 |
* @QCA_NL80211_VENDOR_SUBCMD_SET_QDEPTH_THRESH: Set MSDU queue depth threshold |
| 472 |
* per peer per TID. Attributes for this command are define in |
| 473 |
* enum qca_wlan_set_qdepth_thresh_attr. |
| 474 |
* @QCA_NL80211_VENDOR_SUBCMD_THERMAL_CMD: Provides the thermal shutdown action |
| 475 |
* guide for WLAN driver. Request to suspend of driver and FW if the |
| 476 |
* temperature is higher than the suspend threshold; resume action is |
| 477 |
* requested to driver if the temperature is lower than the resume |
| 478 |
* threshold. In user poll mode, request temperature data by user. For test |
| 479 |
* purpose, getting thermal shutdown configuration parameters is needed. |
| 480 |
* Attributes for this interface are defined in |
| 481 |
* enum qca_wlan_vendor_attr_thermal_cmd. |
| 482 |
* @QCA_NL80211_VENDOR_SUBCMD_THERMAL_EVENT: Thermal events reported from |
| 483 |
* driver. Thermal temperature and indication of resume completion are |
| 484 |
* reported as thermal events. The attributes for this command are defined |
| 485 |
* in enum qca_wlan_vendor_attr_thermal_event. |
| 486 |
* |
| 487 |
* @QCA_NL80211_VENDOR_SUBCMD_WIFI_TEST_CONFIGURATION: Sub command to set WiFi |
| 488 |
* test configuration. Attributes for this command are defined in |
| 489 |
* enum qca_wlan_vendor_attr_wifi_test_config. |
| 490 |
* |
| 491 |
* @QCA_NL80211_VENDOR_SUBCMD_BSS_FILTER: This command is used to configure an |
| 492 |
* RX filter to receive frames from stations that are active on the |
| 493 |
* operating channel, but not associated with the local device (e.g., STAs |
| 494 |
* associated with other APs). Filtering is done based on a list of BSSIDs |
| 495 |
* and STA MAC addresses added by the user. This command is also used to |
| 496 |
* fetch the statistics of unassociated stations. The attributes used with |
| 497 |
* this command are defined in enum qca_wlan_vendor_attr_bss_filter. |
| 498 |
* |
| 499 |
* @QCA_NL80211_VENDOR_SUBCMD_NAN_EXT: An extendable version of NAN vendor |
| 500 |
* command. The earlier command for NAN, QCA_NL80211_VENDOR_SUBCMD_NAN, |
| 501 |
* carried a payload which was a binary blob of data. The command was not |
| 502 |
* extendable to send more information. The newer version carries the |
| 503 |
* legacy blob encapsulated within an attribute and can be extended with |
| 504 |
* additional vendor attributes that can enhance the NAN command interface. |
| 505 |
* @QCA_NL80211_VENDOR_SUBCMD_ROAM_SCAN_EVENT: Event to indicate scan triggered |
| 506 |
* or stopped within driver/firmware in order to initiate roaming. The |
| 507 |
* attributes used with this event are defined in enum |
| 508 |
* qca_wlan_vendor_attr_roam_scan. Some drivers may not send these events |
| 509 |
* in few cases, e.g., if the host processor is sleeping when this event |
| 510 |
* is generated in firmware. |
| 511 |
* |
| 512 |
* @QCA_NL80211_VENDOR_SUBCMD_PEER_CFR_CAPTURE_CFG: This command is used to |
| 513 |
* configure parameters per peer to capture Channel Frequency Response |
| 514 |
* (CFR) and enable Periodic CFR capture. The attributes for this command |
| 515 |
* are defined in enum qca_wlan_vendor_peer_cfr_capture_attr. This command |
| 516 |
* can also be used to send CFR data from the driver to userspace when |
| 517 |
* netlink events are used to send CFR data. |
| 518 |
* |
| 519 |
* @QCA_NL80211_VENDOR_SUBCMD_THROUGHPUT_CHANGE_EVENT: Event to indicate changes |
| 520 |
* in throughput dynamically. The driver estimates the throughput based on |
| 521 |
* number of packets being transmitted/received per second and indicates |
| 522 |
* the changes in throughput to user space. Userspace tools can use this |
| 523 |
* information to configure kernel's TCP parameters in order to achieve |
| 524 |
* peak throughput. Optionally, the driver will also send guidance on |
| 525 |
* modifications to kernel's TCP parameters which can be referred by |
| 526 |
* userspace tools. The attributes used with this event are defined in enum |
| 527 |
* qca_wlan_vendor_attr_throughput_change. |
| 528 |
* |
| 529 |
* @QCA_NL80211_VENDOR_SUBCMD_COEX_CONFIG: This command is used to set |
| 530 |
* priorities among different types of traffic during coex scenarios. |
| 531 |
* Current supported prioritization is among WLAN/BT/ZIGBEE with different |
| 532 |
* profiles mentioned in enum qca_coex_config_profiles. The associated |
| 533 |
* attributes used with this command are defined in enum |
| 534 |
* qca_vendor_attr_coex_config. |
| 535 |
* |
| 536 |
* Based on the config provided, FW will boost the weight and prioritize |
| 537 |
* the traffic for that subsystem (WLAN/BT/Zigbee). |
| 538 |
* |
| 539 |
* @QCA_NL80211_VENDOR_SUBCMD_GET_SUPPORTED_AKMS: This command is used to query |
| 540 |
* the supported AKM suite selectorss from the driver. It returns the list |
| 541 |
* of supported AKMs in the attribute NL80211_ATTR_AKM_SUITES. |
| 542 |
* @QCA_NL80211_VENDOR_SUBCMD_GET_FW_STATE: This command is used to get firmware |
| 543 |
* state from the driver. It returns the firmware state in the attribute |
| 544 |
* QCA_WLAN_VENDOR_ATTR_FW_STATE. |
| 545 |
* @QCA_NL80211_VENDOR_SUBCMD_PEER_STATS_CACHE_FLUSH: This vendor subcommand |
| 546 |
* is used by the driver to flush per-peer cached statistics to user space |
| 547 |
* application. This interface is used as an event from the driver to |
| 548 |
* user space application. Attributes for this event are specified in |
| 549 |
* enum qca_wlan_vendor_attr_peer_stats_cache_params. |
| 550 |
* QCA_WLAN_VENDOR_ATTR_PEER_STATS_CACHE_DATA attribute is expected to be |
| 551 |
* sent in the event. |
| 552 |
* @QCA_NL80211_VENDOR_SUBCMD_MPTA_HELPER_CONFIG: This sub command is used to |
| 553 |
* improve the success rate of Zigbee joining network. |
| 554 |
* Due to PTA master limitation, Zigbee joining network success rate is |
| 555 |
* low while WLAN is working. The WLAN driver needs to configure some |
| 556 |
* parameters including Zigbee state and specific WLAN periods to enhance |
| 557 |
* PTA master. All these parameters are delivered by the attributes |
| 558 |
* defined in enum qca_mpta_helper_vendor_attr. |
| 559 |
* @QCA_NL80211_VENDOR_SUBCMD_BEACON_REPORTING: This sub command is used to |
| 560 |
* implement Beacon frame reporting feature. |
| 561 |
* |
| 562 |
* Userspace can request the driver/firmware to periodically report |
| 563 |
* received Beacon frames whose BSSID is same as the current connected |
| 564 |
* BSS's MAC address. |
| 565 |
* |
| 566 |
* In case the STA seamlessly (without sending disconnect indication to |
| 567 |
* userspace) roams to a different BSS, Beacon frame reporting will be |
| 568 |
* automatically enabled for the Beacon frames whose BSSID is same as the |
| 569 |
* MAC address of the new BSS. Beacon reporting will be stopped when the |
| 570 |
* STA is disconnected (when the disconnect indication is sent to |
| 571 |
* userspace) and need to be explicitly enabled by userspace for next |
| 572 |
* connection. |
| 573 |
* |
| 574 |
* When a Beacon frame matching configured conditions is received, and if |
| 575 |
* userspace has requested to send asynchronous beacon reports, the |
| 576 |
* driver/firmware will encapsulate the details of the Beacon frame in an |
| 577 |
* event and send it to userspace along with updating the BSS information |
| 578 |
* in cfg80211 scan cache, otherwise driver will only update the cfg80211 |
| 579 |
* scan cache with the information from the received Beacon frame but will |
| 580 |
* not send any active report to userspace. |
| 581 |
* |
| 582 |
* The userspace can request the driver/firmware to stop reporting Beacon |
| 583 |
* frames. If the driver/firmware is not able to receive Beacon frames due |
| 584 |
* to other Wi-Fi operations such as off-channel activities, etc., the |
| 585 |
* driver/firmware will send a pause event to userspace and stop reporting |
| 586 |
* Beacon frames. Whether the beacon reporting will be automatically |
| 587 |
* resumed or not by the driver/firmware later will be reported to |
| 588 |
* userspace using the QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_AUTO_RESUMES |
| 589 |
* flag. The beacon reporting shall be resumed for all the cases except |
| 590 |
* either when userspace sets |
| 591 |
* QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_DO_NOT_RESUME flag in the command |
| 592 |
* which triggered the current beacon reporting or during any disconnection |
| 593 |
* case as indicated by setting |
| 594 |
* QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_PAUSE_REASON to |
| 595 |
* QCA_WLAN_VENDOR_BEACON_REPORTING_PAUSE_REASON_DISCONNECTED by the |
| 596 |
* driver. |
| 597 |
* |
| 598 |
* After QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_OP_PAUSE event is received |
| 599 |
* by userspace with QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_AUTO_RESUMES |
| 600 |
* flag not set, the next first |
| 601 |
* QCA_WLAN_VENDOR_BEACON_REPORTING_OP_BEACON_INFO event from the driver |
| 602 |
* shall be considered as un-pause event. |
| 603 |
* |
| 604 |
* All the attributes used with this command are defined in |
| 605 |
* enum qca_wlan_vendor_attr_beacon_reporting_params. |
| 606 |
* @QCA_NL80211_VENDOR_SUBCMD_INTEROP_ISSUES_AP: In practice, some APs have |
| 607 |
* interop issues with the DUT. This sub command is used to transfer the |
| 608 |
* AP info between the driver and user space. This works both as a command |
| 609 |
* and an event. As a command, it configures the stored list of APs from |
| 610 |
* user space to firmware; as an event, it indicates the AP info detected |
| 611 |
* by the firmware to user space for persistent storage. The attributes |
| 612 |
* defined in enum qca_vendor_attr_interop_issues_ap are used to deliver |
| 613 |
* the parameters. |
| 614 |
* @QCA_NL80211_VENDOR_SUBCMD_OEM_DATA: This command/event is used to |
| 615 |
* send/receive OEM data binary blobs to/from application/service to/from |
| 616 |
* firmware. The attributes defined in enum |
| 617 |
* qca_wlan_vendor_attr_oem_data_params are used to deliver the |
| 618 |
* parameters. |
| 619 |
* @QCA_NL80211_VENDOR_SUBCMD_AVOID_FREQUENCY_EXT: This command/event is used |
| 620 |
* to send/receive avoid frequency data using |
| 621 |
* enum qca_wlan_vendor_attr_avoid_frequency_ext. |
| 622 |
* This new command is alternative to existing command |
| 623 |
* QCA_NL80211_VENDOR_SUBCMD_AVOID_FREQUENCY since existing command/event |
| 624 |
* is using stream of bytes instead of structured data using vendor |
| 625 |
* attributes. User space sends unsafe frequency ranges to the driver using |
| 626 |
* a nested attribute %QCA_WLAN_VENDOR_ATTR_AVOID_FREQUENCY_RANGE. On |
| 627 |
* reception of this command, the driver shall check if an interface is |
| 628 |
* operating on an unsafe frequency and the driver shall try to move to a |
| 629 |
* safe channel when needed. If the driver is not able to find a safe |
| 630 |
* channel the interface can keep operating on an unsafe channel with the |
| 631 |
* TX power limit derived based on internal configurations like |
| 632 |
* regulatory/SAR rules. |
| 633 |
* |
| 634 |
* @QCA_NL80211_VENDOR_SUBCMD_ADD_STA_NODE: This vendor subcommand is used to |
| 635 |
* add the STA node details in driver/firmware. Attributes for this event |
| 636 |
* are specified in enum qca_wlan_vendor_attr_add_sta_node_params. |
| 637 |
* @QCA_NL80211_VENDOR_SUBCMD_BTC_CHAIN_MODE: This command is used to set BT |
| 638 |
* coex chain mode from application/service. |
| 639 |
* The attributes defined in enum qca_vendor_attr_btc_chain_mode are used |
| 640 |
* to deliver the parameters. |
| 641 |
* |
| 642 |
* @QCA_NL80211_VENDOR_SUBCMD_GET_STA_INFO: This vendor subcommand is used to |
| 643 |
* get information of a station from driver to userspace. This command can |
| 644 |
* be used in both STA and AP modes. For STA mode, it provides information |
| 645 |
* of the current association when in connected state or the last |
| 646 |
* association when in disconnected state. For AP mode, only information |
| 647 |
* of the currently connected stations is available. This command uses |
| 648 |
* attributes defined in enum qca_wlan_vendor_attr_get_sta_info. |
| 649 |
* |
| 650 |
* @QCA_NL80211_VENDOR_SUBCMD_REQUEST_SAR_LIMITS_EVENT: This acts as an event. |
| 651 |
* Host drivers can request the user space entity to set the SAR power |
| 652 |
* limits with this event. Accordingly, the user space entity is expected |
| 653 |
* to set the SAR power limits. Host drivers can retry this event to the |
| 654 |
* user space for the SAR power limits configuration from user space. If |
| 655 |
* the driver does not get the SAR power limits from user space for all |
| 656 |
* the retried attempts, it can configure a default SAR power limit. |
| 657 |
* |
| 658 |
* @QCA_NL80211_VENDOR_SUBCMD_UPDATE_STA_INFO: This acts as a vendor event and |
| 659 |
* is used to update the information about the station from the driver to |
| 660 |
* userspace. Uses attributes from enum |
| 661 |
* qca_wlan_vendor_attr_update_sta_info. |
| 662 |
* |
| 663 |
* @QCA_NL80211_VENDOR_SUBCMD_DRIVER_DISCONNECT_REASON: This acts as an event. |
| 664 |
* The host driver initiates the disconnection for scenarios such as beacon |
| 665 |
* miss, NUD failure, peer kick out, etc. The disconnection indication |
| 666 |
* through cfg80211_disconnected() expects the reason codes from enum |
| 667 |
* ieee80211_reasoncode which does not signify these various reasons why |
| 668 |
* the driver has triggered the disconnection. This event will be used to |
| 669 |
* send the driver specific reason codes by the host driver to userspace. |
| 670 |
* Host drivers should trigger this event and pass the respective reason |
| 671 |
* code immediately prior to triggering cfg80211_disconnected(). The |
| 672 |
* attributes used with this event are defined in enum |
| 673 |
* qca_wlan_vendor_attr_driver_disconnect_reason. |
| 674 |
* |
| 675 |
* @QCA_NL80211_VENDOR_SUBCMD_CONFIG_TSPEC: This vendor subcommand is used to |
| 676 |
* add/delete TSPEC for each AC. One command is for one specific AC only. |
| 677 |
* This command can only be used in STA mode and the STA must be |
| 678 |
* associated with an AP when the command is issued. Uses attributes |
| 679 |
* defined in enum qca_wlan_vendor_attr_config_tspec. |
| 680 |
* |
| 681 |
* @QCA_NL80211_VENDOR_SUBCMD_CONFIG_TWT: Vendor subcommand to configure TWT. |
| 682 |
* Uses attributes defined in enum qca_wlan_vendor_attr_config_twt. |
| 683 |
* |
| 684 |
* @QCA_NL80211_VENDOR_SUBCMD_GETBAND: Command to get the enabled band(s) from |
| 685 |
* the driver. The band configurations obtained are referred through |
| 686 |
* QCA_WLAN_VENDOR_ATTR_SETBAND_MASK. |
| 687 |
* |
| 688 |
* @QCA_NL80211_VENDOR_SUBCMD_MEDIUM_ASSESS: Vendor subcommand/event for medium |
| 689 |
* assessment. |
| 690 |
* Uses attributes defined in enum qca_wlan_vendor_attr_medium_assess. |
| 691 |
* |
| 692 |
* @QCA_NL80211_VENDOR_SUBCMD_UPDATE_SSID: This acts as a vendor event and is |
| 693 |
* used to update SSID information in hostapd when it is updated in the |
| 694 |
* driver. Uses the attribute NL80211_ATTR_SSID. |
| 695 |
* |
| 696 |
* @QCA_NL80211_VENDOR_SUBCMD_WIFI_FW_STATS: This vendor subcommand is used by |
| 697 |
* the driver to send opaque data from the firmware to userspace. The |
| 698 |
* driver sends an event to userspace whenever such data is received from |
| 699 |
* the firmware. |
| 700 |
* |
| 701 |
* QCA_WLAN_VENDOR_ATTR_CONFIG_GENERIC_DATA is used as the attribute to |
| 702 |
* send this opaque data for this event. |
| 703 |
* |
| 704 |
* The format of the opaque data is specific to the particular firmware |
| 705 |
* version and there is no guarantee of the format remaining same. |
| 706 |
* |
| 707 |
* @QCA_NL80211_VENDOR_SUBCMD_MBSSID_TX_VDEV_STATUS: This acts as an event. |
| 708 |
* The host driver selects Tx VDEV, and notifies user. The attributes |
| 709 |
* used with this event are defined in enum |
| 710 |
* qca_wlan_vendor_attr_mbssid_tx_vdev_status. |
| 711 |
* This event contains Tx VDEV group information, other VDEVs |
| 712 |
* interface index, and status information. |
| 713 |
* |
| 714 |
* @QCA_NL80211_VENDOR_SUBCMD_CONCURRENT_MULTI_STA_POLICY: Vendor command to |
| 715 |
* configure the concurrent session policies when multiple STA interfaces |
| 716 |
* are (getting) active. The attributes used by this command are defined |
| 717 |
* in enum qca_wlan_vendor_attr_concurrent_sta_policy. |
| 718 |
* |
| 719 |
* @QCA_NL80211_VENDOR_SUBCMD_USABLE_CHANNELS: Userspace can use this command |
| 720 |
* to query usable channels for different interface types such as STA, |
| 721 |
* AP, P2P GO, P2P Client, NAN, etc. The driver shall report all usable |
| 722 |
* channels in the response based on country code, different static |
| 723 |
* configurations, concurrency combinations, etc. The attributes used |
| 724 |
* with this command are defined in |
| 725 |
* enum qca_wlan_vendor_attr_usable_channels. |
| 726 |
* |
| 727 |
* @QCA_NL80211_VENDOR_SUBCMD_GET_RADAR_HISTORY: This vendor subcommand is used |
| 728 |
* to get DFS radar history from the driver to userspace. The driver |
| 729 |
* returns QCA_WLAN_VENDOR_ATTR_RADAR_HISTORY_ENTRIES attribute with an |
| 730 |
* array of nested entries. |
| 731 |
* |
| 732 |
* @QCA_NL80211_VENDOR_SUBCMD_MDNS_OFFLOAD: Userspace can use this command to |
| 733 |
* enable/disable mDNS offload to the firmware. The attributes used with |
| 734 |
* this command are defined in enum qca_wlan_vendor_attr_mdns_offload. |
| 735 |
* |
| 736 |
* @QCA_NL80211_VENDOR_SUBCMD_SET_MONITOR_MODE: This vendor subcommand is used |
| 737 |
* to set packet monitor mode that aims to send the specified set of TX and |
| 738 |
* RX frames on the current client interface to an active monitor |
| 739 |
* interface. If this monitor mode is set, the driver will send the |
| 740 |
* configured frames, from the interface on which the command is issued, to |
| 741 |
* an active monitor interface. The attributes used with this command are |
| 742 |
* defined in enum qca_wlan_vendor_attr_set_monitor_mode. |
| 743 |
* |
| 744 |
* Though the monitor mode is configured for the respective |
| 745 |
* Data/Management/Control frames, it is up to the respective WLAN |
| 746 |
* driver/firmware/hardware designs to consider the possibility of sending |
| 747 |
* these frames over the monitor interface. For example, the Control frames |
| 748 |
* are handled within the hardware and thus passing such frames over the |
| 749 |
* monitor interface is left to the respective designs. |
| 750 |
* |
| 751 |
* Also, this monitor mode is governed to behave accordingly in |
| 752 |
* suspend/resume states. If the firmware handles any of such frames in |
| 753 |
* suspend state without waking up the host and if the monitor mode is |
| 754 |
* configured to notify all such frames, the firmware is expected to resume |
| 755 |
* the host and forward the respective frames to the monitor interface. |
| 756 |
* Please note that such a request to get the frames over the monitor |
| 757 |
* interface will have a definite power implication. |
| 758 |
* |
| 759 |
* @QCA_NL80211_VENDOR_SUBCMD_ROAM_EVENTS: This vendor subcommand is used both |
| 760 |
* as a request to set the driver/firmware with the parameters to trigger |
| 761 |
* the roaming events, and also used by the driver/firmware to pass on the |
| 762 |
* various roam events to userspace. |
| 763 |
* Applicable only for the STA mode. The attributes used with this command |
| 764 |
* are defined in enum qca_wlan_vendor_attr_roam_events. |
| 765 |
*/ |
| 766 |
enum qca_nl80211_vendor_subcmds { |
| 767 |
QCA_NL80211_VENDOR_SUBCMD_UNSPEC = 0, |
| 768 |
QCA_NL80211_VENDOR_SUBCMD_TEST = 1, |
| 769 |
/* subcmds 2..8 not yet allocated */ |
| 770 |
QCA_NL80211_VENDOR_SUBCMD_ROAMING = 9, |
| 771 |
QCA_NL80211_VENDOR_SUBCMD_AVOID_FREQUENCY = 10, |
| 772 |
QCA_NL80211_VENDOR_SUBCMD_DFS_CAPABILITY = 11, |
| 773 |
QCA_NL80211_VENDOR_SUBCMD_NAN = 12, |
| 774 |
QCA_NL80211_VENDOR_SUBCMD_STATS_EXT = 13, |
| 775 |
QCA_NL80211_VENDOR_SUBCMD_LL_STATS_SET = 14, |
| 776 |
QCA_NL80211_VENDOR_SUBCMD_LL_STATS_GET = 15, |
| 777 |
QCA_NL80211_VENDOR_SUBCMD_LL_STATS_CLR = 16, |
| 778 |
QCA_NL80211_VENDOR_SUBCMD_LL_STATS_RADIO_RESULTS = 17, |
| 779 |
QCA_NL80211_VENDOR_SUBCMD_LL_STATS_IFACE_RESULTS = 18, |
| 780 |
QCA_NL80211_VENDOR_SUBCMD_LL_STATS_PEERS_RESULTS = 19, |
| 781 |
QCA_NL80211_VENDOR_SUBCMD_GSCAN_START = 20, |
| 782 |
QCA_NL80211_VENDOR_SUBCMD_GSCAN_STOP = 21, |
| 783 |
QCA_NL80211_VENDOR_SUBCMD_GSCAN_GET_VALID_CHANNELS = 22, |
| 784 |
QCA_NL80211_VENDOR_SUBCMD_GSCAN_GET_CAPABILITIES = 23, |
| 785 |
QCA_NL80211_VENDOR_SUBCMD_GSCAN_GET_CACHED_RESULTS = 24, |
| 786 |
QCA_NL80211_VENDOR_SUBCMD_GSCAN_SCAN_RESULTS_AVAILABLE = 25, |
| 787 |
QCA_NL80211_VENDOR_SUBCMD_GSCAN_FULL_SCAN_RESULT = 26, |
| 788 |
QCA_NL80211_VENDOR_SUBCMD_GSCAN_SCAN_EVENT = 27, |
| 789 |
QCA_NL80211_VENDOR_SUBCMD_GSCAN_HOTLIST_AP_FOUND = 28, |
| 790 |
QCA_NL80211_VENDOR_SUBCMD_GSCAN_SET_BSSID_HOTLIST = 29, |
| 791 |
QCA_NL80211_VENDOR_SUBCMD_GSCAN_RESET_BSSID_HOTLIST = 30, |
| 792 |
QCA_NL80211_VENDOR_SUBCMD_GSCAN_SIGNIFICANT_CHANGE = 31, |
| 793 |
QCA_NL80211_VENDOR_SUBCMD_GSCAN_SET_SIGNIFICANT_CHANGE = 32, |
| 794 |
QCA_NL80211_VENDOR_SUBCMD_GSCAN_RESET_SIGNIFICANT_CHANGE = 33, |
| 795 |
QCA_NL80211_VENDOR_SUBCMD_TDLS_ENABLE = 34, |
| 796 |
QCA_NL80211_VENDOR_SUBCMD_TDLS_DISABLE = 35, |
| 797 |
QCA_NL80211_VENDOR_SUBCMD_TDLS_GET_STATUS = 36, |
| 798 |
QCA_NL80211_VENDOR_SUBCMD_TDLS_STATE = 37, |
| 799 |
QCA_NL80211_VENDOR_SUBCMD_GET_SUPPORTED_FEATURES = 38, |
| 800 |
QCA_NL80211_VENDOR_SUBCMD_SCANNING_MAC_OUI = 39, |
| 801 |
QCA_NL80211_VENDOR_SUBCMD_NO_DFS_FLAG = 40, |
| 802 |
QCA_NL80211_VENDOR_SUBCMD_GSCAN_HOTLIST_AP_LOST = 41, |
| 803 |
QCA_NL80211_VENDOR_SUBCMD_GET_CONCURRENCY_MATRIX = 42, |
| 804 |
/* 43..49 - reserved for QCA */ |
| 805 |
QCA_NL80211_VENDOR_SUBCMD_KEY_MGMT_SET_KEY = 50, |
| 806 |
QCA_NL80211_VENDOR_SUBCMD_KEY_MGMT_ROAM_AUTH = 51, |
| 807 |
QCA_NL80211_VENDOR_SUBCMD_APFIND = 52, |
| 808 |
/* 53 - reserved - was used by QCA, but not in use anymore */ |
| 809 |
QCA_NL80211_VENDOR_SUBCMD_DO_ACS = 54, |
| 810 |
QCA_NL80211_VENDOR_SUBCMD_GET_FEATURES = 55, |
| 811 |
QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_CAC_STARTED = 56, |
| 812 |
QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_CAC_FINISHED = 57, |
| 813 |
QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_CAC_ABORTED = 58, |
| 814 |
QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_CAC_NOP_FINISHED = 59, |
| 815 |
QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_RADAR_DETECTED = 60, |
| 816 |
QCA_NL80211_VENDOR_SUBCMD_GET_WIFI_INFO = 61, |
| 817 |
QCA_NL80211_VENDOR_SUBCMD_WIFI_LOGGER_START = 62, |
| 818 |
QCA_NL80211_VENDOR_SUBCMD_WIFI_LOGGER_MEMORY_DUMP = 63, |
| 819 |
QCA_NL80211_VENDOR_SUBCMD_ROAM = 64, |
| 820 |
QCA_NL80211_VENDOR_SUBCMD_GSCAN_SET_SSID_HOTLIST = 65, |
| 821 |
QCA_NL80211_VENDOR_SUBCMD_GSCAN_RESET_SSID_HOTLIST = 66, |
| 822 |
QCA_NL80211_VENDOR_SUBCMD_GSCAN_HOTLIST_SSID_FOUND = 67, |
| 823 |
QCA_NL80211_VENDOR_SUBCMD_GSCAN_HOTLIST_SSID_LOST = 68, |
| 824 |
QCA_NL80211_VENDOR_SUBCMD_PNO_SET_LIST = 69, |
| 825 |
QCA_NL80211_VENDOR_SUBCMD_PNO_SET_PASSPOINT_LIST = 70, |
| 826 |
QCA_NL80211_VENDOR_SUBCMD_PNO_RESET_PASSPOINT_LIST = 71, |
| 827 |
QCA_NL80211_VENDOR_SUBCMD_PNO_NETWORK_FOUND = 72, |
| 828 |
QCA_NL80211_VENDOR_SUBCMD_PNO_PASSPOINT_NETWORK_FOUND = 73, |
| 829 |
/* Wi-Fi configuration subcommands */ |
| 830 |
QCA_NL80211_VENDOR_SUBCMD_SET_WIFI_CONFIGURATION = 74, |
| 831 |
QCA_NL80211_VENDOR_SUBCMD_GET_WIFI_CONFIGURATION = 75, |
| 832 |
QCA_NL80211_VENDOR_SUBCMD_GET_LOGGER_FEATURE_SET = 76, |
| 833 |
QCA_NL80211_VENDOR_SUBCMD_GET_RING_DATA = 77, |
| 834 |
QCA_NL80211_VENDOR_SUBCMD_TDLS_GET_CAPABILITIES = 78, |
| 835 |
QCA_NL80211_VENDOR_SUBCMD_OFFLOADED_PACKETS = 79, |
| 836 |
QCA_NL80211_VENDOR_SUBCMD_MONITOR_RSSI = 80, |
| 837 |
QCA_NL80211_VENDOR_SUBCMD_NDP = 81, |
| 838 |
QCA_NL80211_VENDOR_SUBCMD_ND_OFFLOAD = 82, |
| 839 |
QCA_NL80211_VENDOR_SUBCMD_PACKET_FILTER = 83, |
| 840 |
QCA_NL80211_VENDOR_SUBCMD_GET_BUS_SIZE = 84, |
| 841 |
QCA_NL80211_VENDOR_SUBCMD_GET_WAKE_REASON_STATS = 85, |
| 842 |
/* 86-90 - reserved for QCA */ |
| 843 |
QCA_NL80211_VENDOR_SUBCMD_DATA_OFFLOAD = 91, |
| 844 |
QCA_NL80211_VENDOR_SUBCMD_OCB_SET_CONFIG = 92, |
| 845 |
QCA_NL80211_VENDOR_SUBCMD_OCB_SET_UTC_TIME = 93, |
| 846 |
QCA_NL80211_VENDOR_SUBCMD_OCB_START_TIMING_ADVERT = 94, |
| 847 |
QCA_NL80211_VENDOR_SUBCMD_OCB_STOP_TIMING_ADVERT = 95, |
| 848 |
QCA_NL80211_VENDOR_SUBCMD_OCB_GET_TSF_TIMER = 96, |
| 849 |
QCA_NL80211_VENDOR_SUBCMD_DCC_GET_STATS = 97, |
| 850 |
QCA_NL80211_VENDOR_SUBCMD_DCC_CLEAR_STATS = 98, |
| 851 |
QCA_NL80211_VENDOR_SUBCMD_DCC_UPDATE_NDL = 99, |
| 852 |
QCA_NL80211_VENDOR_SUBCMD_DCC_STATS_EVENT = 100, |
| 853 |
QCA_NL80211_VENDOR_SUBCMD_LINK_PROPERTIES = 101, |
| 854 |
QCA_NL80211_VENDOR_SUBCMD_GW_PARAM_CONFIG = 102, |
| 855 |
QCA_NL80211_VENDOR_SUBCMD_GET_PREFERRED_FREQ_LIST = 103, |
| 856 |
QCA_NL80211_VENDOR_SUBCMD_SET_PROBABLE_OPER_CHANNEL = 104, |
| 857 |
QCA_NL80211_VENDOR_SUBCMD_SETBAND = 105, |
| 858 |
QCA_NL80211_VENDOR_SUBCMD_TRIGGER_SCAN = 106, |
| 859 |
QCA_NL80211_VENDOR_SUBCMD_SCAN_DONE = 107, |
| 860 |
QCA_NL80211_VENDOR_SUBCMD_OTA_TEST = 108, |
| 861 |
QCA_NL80211_VENDOR_SUBCMD_SET_TXPOWER_SCALE = 109, |
| 862 |
/* 110..114 - reserved for QCA */ |
| 863 |
QCA_NL80211_VENDOR_SUBCMD_SET_TXPOWER_DECR_DB = 115, |
| 864 |
QCA_NL80211_VENDOR_SUBCMD_ACS_POLICY = 116, |
| 865 |
/* 117 - reserved for QCA */ |
| 866 |
QCA_NL80211_VENDOR_SUBCMD_SET_SAP_CONFIG = 118, |
| 867 |
QCA_NL80211_VENDOR_SUBCMD_TSF = 119, |
| 868 |
QCA_NL80211_VENDOR_SUBCMD_WISA = 120, |
| 869 |
/* 121 - reserved for QCA */ |
| 870 |
QCA_NL80211_VENDOR_SUBCMD_P2P_LISTEN_OFFLOAD_START = 122, |
| 871 |
QCA_NL80211_VENDOR_SUBCMD_P2P_LISTEN_OFFLOAD_STOP = 123, |
| 872 |
QCA_NL80211_VENDOR_SUBCMD_SAP_CONDITIONAL_CHAN_SWITCH = 124, |
| 873 |
QCA_NL80211_VENDOR_SUBCMD_GPIO_CONFIG_COMMAND = 125, |
| 874 |
QCA_NL80211_VENDOR_SUBCMD_GET_HW_CAPABILITY = 126, |
| 875 |
QCA_NL80211_VENDOR_SUBCMD_LL_STATS_EXT = 127, |
| 876 |
/* FTM/indoor location subcommands */ |
| 877 |
QCA_NL80211_VENDOR_SUBCMD_LOC_GET_CAPA = 128, |
| 878 |
QCA_NL80211_VENDOR_SUBCMD_FTM_START_SESSION = 129, |
| 879 |
QCA_NL80211_VENDOR_SUBCMD_FTM_ABORT_SESSION = 130, |
| 880 |
QCA_NL80211_VENDOR_SUBCMD_FTM_MEAS_RESULT = 131, |
| 881 |
QCA_NL80211_VENDOR_SUBCMD_FTM_SESSION_DONE = 132, |
| 882 |
QCA_NL80211_VENDOR_SUBCMD_FTM_CFG_RESPONDER = 133, |
| 883 |
QCA_NL80211_VENDOR_SUBCMD_AOA_MEAS = 134, |
| 884 |
QCA_NL80211_VENDOR_SUBCMD_AOA_ABORT_MEAS = 135, |
| 885 |
QCA_NL80211_VENDOR_SUBCMD_AOA_MEAS_RESULT = 136, |
| 886 |
QCA_NL80211_VENDOR_SUBCMD_ENCRYPTION_TEST = 137, |
| 887 |
QCA_NL80211_VENDOR_SUBCMD_GET_CHAIN_RSSI = 138, |
| 888 |
/* DMG low level RF sector operations */ |
| 889 |
QCA_NL80211_VENDOR_SUBCMD_DMG_RF_GET_SECTOR_CFG = 139, |
| 890 |
QCA_NL80211_VENDOR_SUBCMD_DMG_RF_SET_SECTOR_CFG = 140, |
| 891 |
QCA_NL80211_VENDOR_SUBCMD_DMG_RF_GET_SELECTED_SECTOR = 141, |
| 892 |
QCA_NL80211_VENDOR_SUBCMD_DMG_RF_SET_SELECTED_SECTOR = 142, |
| 893 |
QCA_NL80211_VENDOR_SUBCMD_CONFIGURE_TDLS = 143, |
| 894 |
QCA_NL80211_VENDOR_SUBCMD_GET_HE_CAPABILITIES = 144, |
| 895 |
QCA_NL80211_VENDOR_SUBCMD_ABORT_SCAN = 145, |
| 896 |
QCA_NL80211_VENDOR_SUBCMD_SET_SAR_LIMITS = 146, |
| 897 |
QCA_NL80211_VENDOR_SUBCMD_EXTERNAL_ACS = 147, |
| 898 |
QCA_NL80211_VENDOR_SUBCMD_CHIP_PWRSAVE_FAILURE = 148, |
| 899 |
QCA_NL80211_VENDOR_SUBCMD_NUD_STATS_SET = 149, |
| 900 |
QCA_NL80211_VENDOR_SUBCMD_NUD_STATS_GET = 150, |
| 901 |
QCA_NL80211_VENDOR_SUBCMD_FETCH_BSS_TRANSITION_STATUS = 151, |
| 902 |
QCA_NL80211_VENDOR_SUBCMD_SET_TRACE_LEVEL = 152, |
| 903 |
QCA_NL80211_VENDOR_SUBCMD_BRP_SET_ANT_LIMIT = 153, |
| 904 |
QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_START = 154, |
| 905 |
QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_STOP = 155, |
| 906 |
QCA_NL80211_VENDOR_SUBCMD_ACTIVE_TOS = 156, |
| 907 |
QCA_NL80211_VENDOR_SUBCMD_HANG = 157, |
| 908 |
QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_CONFIG = 158, |
| 909 |
QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_DIAG_STATS = 159, |
| 910 |
QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_CAP_INFO = 160, |
| 911 |
QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_STATUS = 161, |
| 912 |
/* Flush peer pending data */ |
| 913 |
QCA_NL80211_VENDOR_SUBCMD_PEER_FLUSH_PENDING = 162, |
| 914 |
QCA_NL80211_VENDOR_SUBCMD_GET_RROP_INFO = 163, |
| 915 |
QCA_NL80211_VENDOR_SUBCMD_GET_SAR_LIMITS = 164, |
| 916 |
QCA_NL80211_VENDOR_SUBCMD_WLAN_MAC_INFO = 165, |
| 917 |
QCA_NL80211_VENDOR_SUBCMD_SET_QDEPTH_THRESH = 166, |
| 918 |
/* Thermal shutdown commands to protect wifi chip */ |
| 919 |
QCA_NL80211_VENDOR_SUBCMD_THERMAL_CMD = 167, |
| 920 |
QCA_NL80211_VENDOR_SUBCMD_THERMAL_EVENT = 168, |
| 921 |
/* Wi-Fi test configuration subcommand */ |
| 922 |
QCA_NL80211_VENDOR_SUBCMD_WIFI_TEST_CONFIGURATION = 169, |
| 923 |
/* Frame filter operations for other BSSs/unassociated STAs */ |
| 924 |
QCA_NL80211_VENDOR_SUBCMD_BSS_FILTER = 170, |
| 925 |
QCA_NL80211_VENDOR_SUBCMD_NAN_EXT = 171, |
| 926 |
QCA_NL80211_VENDOR_SUBCMD_ROAM_SCAN_EVENT = 172, |
| 927 |
QCA_NL80211_VENDOR_SUBCMD_PEER_CFR_CAPTURE_CFG = 173, |
| 928 |
QCA_NL80211_VENDOR_SUBCMD_THROUGHPUT_CHANGE_EVENT = 174, |
| 929 |
QCA_NL80211_VENDOR_SUBCMD_COEX_CONFIG = 175, |
| 930 |
QCA_NL80211_VENDOR_SUBCMD_GET_SUPPORTED_AKMS = 176, |
| 931 |
QCA_NL80211_VENDOR_SUBCMD_GET_FW_STATE = 177, |
| 932 |
QCA_NL80211_VENDOR_SUBCMD_PEER_STATS_CACHE_FLUSH = 178, |
| 933 |
QCA_NL80211_VENDOR_SUBCMD_MPTA_HELPER_CONFIG = 179, |
| 934 |
QCA_NL80211_VENDOR_SUBCMD_BEACON_REPORTING = 180, |
| 935 |
QCA_NL80211_VENDOR_SUBCMD_INTEROP_ISSUES_AP = 181, |
| 936 |
QCA_NL80211_VENDOR_SUBCMD_OEM_DATA = 182, |
| 937 |
QCA_NL80211_VENDOR_SUBCMD_AVOID_FREQUENCY_EXT = 183, |
| 938 |
QCA_NL80211_VENDOR_SUBCMD_ADD_STA_NODE = 184, |
| 939 |
QCA_NL80211_VENDOR_SUBCMD_BTC_CHAIN_MODE = 185, |
| 940 |
QCA_NL80211_VENDOR_SUBCMD_GET_STA_INFO = 186, |
| 941 |
QCA_NL80211_VENDOR_SUBCMD_GET_SAR_LIMITS_EVENT = 187, |
| 942 |
QCA_NL80211_VENDOR_SUBCMD_UPDATE_STA_INFO = 188, |
| 943 |
QCA_NL80211_VENDOR_SUBCMD_DRIVER_DISCONNECT_REASON = 189, |
| 944 |
QCA_NL80211_VENDOR_SUBCMD_CONFIG_TSPEC = 190, |
| 945 |
QCA_NL80211_VENDOR_SUBCMD_CONFIG_TWT = 191, |
| 946 |
QCA_NL80211_VENDOR_SUBCMD_GETBAND = 192, |
| 947 |
QCA_NL80211_VENDOR_SUBCMD_MEDIUM_ASSESS = 193, |
| 948 |
QCA_NL80211_VENDOR_SUBCMD_UPDATE_SSID = 194, |
| 949 |
QCA_NL80211_VENDOR_SUBCMD_WIFI_FW_STATS = 195, |
| 950 |
QCA_NL80211_VENDOR_SUBCMD_MBSSID_TX_VDEV_STATUS = 196, |
| 951 |
QCA_NL80211_VENDOR_SUBCMD_CONCURRENT_MULTI_STA_POLICY = 197, |
| 952 |
QCA_NL80211_VENDOR_SUBCMD_USABLE_CHANNELS = 198, |
| 953 |
QCA_NL80211_VENDOR_SUBCMD_GET_RADAR_HISTORY = 199, |
| 954 |
QCA_NL80211_VENDOR_SUBCMD_MDNS_OFFLOAD = 200, |
| 955 |
/* 201 - reserved for QCA */ |
| 956 |
QCA_NL80211_VENDOR_SUBCMD_SET_MONITOR_MODE = 202, |
| 957 |
QCA_NL80211_VENDOR_SUBCMD_ROAM_EVENTS = 203, |
| 958 |
}; |
| 959 |
|
| 960 |
enum qca_wlan_vendor_attr { |
| 961 |
QCA_WLAN_VENDOR_ATTR_INVALID = 0, |
| 962 |
/* used by QCA_NL80211_VENDOR_SUBCMD_DFS_CAPABILITY */ |
| 963 |
QCA_WLAN_VENDOR_ATTR_DFS = 1, |
| 964 |
/* Used only when driver sends vendor events to the userspace under the |
| 965 |
* command QCA_NL80211_VENDOR_SUBCMD_NAN. Not used when userspace sends |
| 966 |
* commands to the driver. |
| 967 |
*/ |
| 968 |
QCA_WLAN_VENDOR_ATTR_NAN = 2, |
| 969 |
/* used by QCA_NL80211_VENDOR_SUBCMD_STATS_EXT */ |
| 970 |
QCA_WLAN_VENDOR_ATTR_STATS_EXT = 3, |
| 971 |
/* used by QCA_NL80211_VENDOR_SUBCMD_STATS_EXT */ |
| 972 |
QCA_WLAN_VENDOR_ATTR_IFINDEX = 4, |
| 973 |
/* used by QCA_NL80211_VENDOR_SUBCMD_ROAMING, u32 with values defined |
| 974 |
* by enum qca_roaming_policy. |
| 975 |
*/ |
| 976 |
QCA_WLAN_VENDOR_ATTR_ROAMING_POLICY = 5, |
| 977 |
QCA_WLAN_VENDOR_ATTR_MAC_ADDR = 6, |
| 978 |
/* used by QCA_NL80211_VENDOR_SUBCMD_GET_FEATURES */ |
| 979 |
QCA_WLAN_VENDOR_ATTR_FEATURE_FLAGS = 7, |
| 980 |
QCA_WLAN_VENDOR_ATTR_TEST = 8, |
| 981 |
/* used by QCA_NL80211_VENDOR_SUBCMD_GET_FEATURES */ |
| 982 |
/* Unsigned 32-bit value. */ |
| 983 |
QCA_WLAN_VENDOR_ATTR_CONCURRENCY_CAPA = 9, |
| 984 |
/* Unsigned 32-bit value */ |
| 985 |
QCA_WLAN_VENDOR_ATTR_MAX_CONCURRENT_CHANNELS_2_4_BAND = 10, |
| 986 |
/* Unsigned 32-bit value */ |
| 987 |
QCA_WLAN_VENDOR_ATTR_MAX_CONCURRENT_CHANNELS_5_0_BAND = 11, |
| 988 |
/* Unsigned 32-bit value from enum qca_set_band. The allowed values for |
| 989 |
* this attribute are limited to QCA_SETBAND_AUTO, QCA_SETBAND_5G, and |
| 990 |
* QCA_SETBAND_2G. This attribute is deprecated. Recommendation is to |
| 991 |
* use QCA_WLAN_VENDOR_ATTR_SETBAND_MASK instead. |
| 992 |
*/ |
| 993 |
QCA_WLAN_VENDOR_ATTR_SETBAND_VALUE = 12, |
| 994 |
/* Dummy (NOP) attribute for 64 bit padding */ |
| 995 |
QCA_WLAN_VENDOR_ATTR_PAD = 13, |
| 996 |
/* Unique FTM session cookie (Unsigned 64 bit). Specified in |
| 997 |
* QCA_NL80211_VENDOR_SUBCMD_FTM_START_SESSION. Reported in |
| 998 |
* the session in QCA_NL80211_VENDOR_SUBCMD_FTM_MEAS_RESULT and |
| 999 |
* QCA_NL80211_VENDOR_SUBCMD_FTM_SESSION_DONE. |
| 1000 |
*/ |
| 1001 |
QCA_WLAN_VENDOR_ATTR_FTM_SESSION_COOKIE = 14, |
| 1002 |
/* Indoor location capabilities, returned by |
| 1003 |
* QCA_NL80211_VENDOR_SUBCMD_LOC_GET_CAPA. |
| 1004 |
* see enum qca_wlan_vendor_attr_loc_capa. |
| 1005 |
*/ |
| 1006 |
QCA_WLAN_VENDOR_ATTR_LOC_CAPA = 15, |
| 1007 |
/* Array of nested attributes containing information about each peer |
| 1008 |
* in FTM measurement session. See enum qca_wlan_vendor_attr_peer_info |
| 1009 |
* for supported attributes for each peer. |
| 1010 |
*/ |
| 1011 |
QCA_WLAN_VENDOR_ATTR_FTM_MEAS_PEERS = 16, |
| 1012 |
/* Array of nested attributes containing measurement results for |
| 1013 |
* one or more peers, reported by the |
| 1014 |
* QCA_NL80211_VENDOR_SUBCMD_FTM_MEAS_RESULT event. |
| 1015 |
* See enum qca_wlan_vendor_attr_peer_result for list of supported |
| 1016 |
* attributes. |
| 1017 |
*/ |
| 1018 |
QCA_WLAN_VENDOR_ATTR_FTM_MEAS_PEER_RESULTS = 17, |
| 1019 |
/* Flag attribute for enabling or disabling responder functionality. */ |
| 1020 |
QCA_WLAN_VENDOR_ATTR_FTM_RESPONDER_ENABLE = 18, |
| 1021 |
/* Used in the QCA_NL80211_VENDOR_SUBCMD_FTM_CFG_RESPONDER |
| 1022 |
* command to specify the LCI report that will be sent by |
| 1023 |
* the responder during a measurement exchange. The format is |
| 1024 |
* defined in IEEE P802.11-REVmc/D7.0, 9.4.2.22.10. |
| 1025 |
*/ |
| 1026 |
QCA_WLAN_VENDOR_ATTR_FTM_LCI = 19, |
| 1027 |
/* Used in the QCA_NL80211_VENDOR_SUBCMD_FTM_CFG_RESPONDER |
| 1028 |
* command to specify the location civic report that will |
| 1029 |
* be sent by the responder during a measurement exchange. |
| 1030 |
* The format is defined in IEEE P802.11-REVmc/D7.0, 9.4.2.22.13. |
| 1031 |
*/ |
| 1032 |
QCA_WLAN_VENDOR_ATTR_FTM_LCR = 20, |
| 1033 |
/* Session/measurement completion status code, |
| 1034 |
* reported in QCA_NL80211_VENDOR_SUBCMD_FTM_SESSION_DONE and |
| 1035 |
* QCA_NL80211_VENDOR_SUBCMD_AOA_MEAS_RESULT |
| 1036 |
* see enum qca_vendor_attr_loc_session_status. |
| 1037 |
*/ |
| 1038 |
QCA_WLAN_VENDOR_ATTR_LOC_SESSION_STATUS = 21, |
| 1039 |
/* Initial dialog token used by responder (0 if not specified), |
| 1040 |
* unsigned 8 bit value. |
| 1041 |
*/ |
| 1042 |
QCA_WLAN_VENDOR_ATTR_FTM_INITIAL_TOKEN = 22, |
| 1043 |
/* AOA measurement type. Requested in QCA_NL80211_VENDOR_SUBCMD_AOA_MEAS |
| 1044 |
* and optionally in QCA_NL80211_VENDOR_SUBCMD_FTM_START_SESSION if |
| 1045 |
* AOA measurements are needed as part of an FTM session. |
| 1046 |
* Reported by QCA_NL80211_VENDOR_SUBCMD_AOA_MEAS_RESULT. See |
| 1047 |
* enum qca_wlan_vendor_attr_aoa_type. |
| 1048 |
*/ |
| 1049 |
QCA_WLAN_VENDOR_ATTR_AOA_TYPE = 23, |
| 1050 |
/* A bit mask (unsigned 32 bit value) of antenna arrays used |
| 1051 |
* by indoor location measurements. Refers to the antenna |
| 1052 |
* arrays described by QCA_VENDOR_ATTR_LOC_CAPA_ANTENNA_ARRAYS. |
| 1053 |
*/ |
| 1054 |
QCA_WLAN_VENDOR_ATTR_LOC_ANTENNA_ARRAY_MASK = 24, |
| 1055 |
/* AOA measurement data. Its contents depends on the AOA measurement |
| 1056 |
* type and antenna array mask: |
| 1057 |
* QCA_WLAN_VENDOR_ATTR_AOA_TYPE_TOP_CIR_PHASE: array of U16 values, |
| 1058 |
* phase of the strongest CIR path for each antenna in the measured |
| 1059 |
* array(s). |
| 1060 |
* QCA_WLAN_VENDOR_ATTR_AOA_TYPE_TOP_CIR_PHASE_AMP: array of 2 U16 |
| 1061 |
* values, phase and amplitude of the strongest CIR path for each |
| 1062 |
* antenna in the measured array(s). |
| 1063 |
*/ |
| 1064 |
QCA_WLAN_VENDOR_ATTR_AOA_MEAS_RESULT = 25, |
| 1065 |
/* Used in QCA_NL80211_VENDOR_SUBCMD_GET_CHAIN_RSSI command |
| 1066 |
* to specify the chain number (unsigned 32 bit value) to inquire |
| 1067 |
* the corresponding antenna RSSI value |
| 1068 |
*/ |
| 1069 |
QCA_WLAN_VENDOR_ATTR_CHAIN_INDEX = 26, |
| 1070 |
/* Used in QCA_NL80211_VENDOR_SUBCMD_GET_CHAIN_RSSI command |
| 1071 |
* to report the specific antenna RSSI value (unsigned 32 bit value) |
| 1072 |
*/ |
| 1073 |
QCA_WLAN_VENDOR_ATTR_CHAIN_RSSI = 27, |
| 1074 |
/* Frequency in MHz, various uses. Unsigned 32 bit value */ |
| 1075 |
QCA_WLAN_VENDOR_ATTR_FREQ = 28, |
| 1076 |
/* TSF timer value, unsigned 64 bit value. |
| 1077 |
* May be returned by various commands. |
| 1078 |
*/ |
| 1079 |
QCA_WLAN_VENDOR_ATTR_TSF = 29, |
| 1080 |
/* DMG RF sector index, unsigned 16 bit number. Valid values are |
| 1081 |
* 0..127 for sector indices or 65535 as special value used to |
| 1082 |
* unlock sector selection in |
| 1083 |
* QCA_NL80211_VENDOR_SUBCMD_DMG_RF_SET_SELECTED_SECTOR. |
| 1084 |
*/ |
| 1085 |
QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_INDEX = 30, |
| 1086 |
/* DMG RF sector type, unsigned 8 bit value. One of the values |
| 1087 |
* in enum qca_wlan_vendor_attr_dmg_rf_sector_type. |
| 1088 |
*/ |
| 1089 |
QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_TYPE = 31, |
| 1090 |
/* Bitmask of DMG RF modules for which information is requested. Each |
| 1091 |
* bit corresponds to an RF module with the same index as the bit |
| 1092 |
* number. Unsigned 32 bit number but only low 8 bits can be set since |
| 1093 |
* all DMG chips currently have up to 8 RF modules. |
| 1094 |
*/ |
| 1095 |
QCA_WLAN_VENDOR_ATTR_DMG_RF_MODULE_MASK = 32, |
| 1096 |
/* Array of nested attributes where each entry is DMG RF sector |
| 1097 |
* configuration for a single RF module. |
| 1098 |
* Attributes for each entry are taken from enum |
| 1099 |
* qca_wlan_vendor_attr_dmg_rf_sector_cfg. |
| 1100 |
* Specified in QCA_NL80211_VENDOR_SUBCMD_DMG_RF_SET_SECTOR_CFG |
| 1101 |
* and returned by QCA_NL80211_VENDOR_SUBCMD_DMG_RF_GET_SECTOR_CFG. |
| 1102 |
*/ |
| 1103 |
QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG = 33, |
| 1104 |
/* Used in QCA_NL80211_VENDOR_SUBCMD_STATS_EXT command |
| 1105 |
* to report frame aggregation statistics to userspace. |
| 1106 |
*/ |
| 1107 |
QCA_WLAN_VENDOR_ATTR_RX_AGGREGATION_STATS_HOLES_NUM = 34, |
| 1108 |
QCA_WLAN_VENDOR_ATTR_RX_AGGREGATION_STATS_HOLES_INFO = 35, |
| 1109 |
/* Unsigned 8-bit value representing MBO transition reason code as |
| 1110 |
* provided by the AP used by subcommand |
| 1111 |
* QCA_NL80211_VENDOR_SUBCMD_FETCH_BSS_TRANSITION_STATUS. This is |
| 1112 |
* specified by the userspace in the request to the driver. |
| 1113 |
*/ |
| 1114 |
QCA_WLAN_VENDOR_ATTR_BTM_MBO_TRANSITION_REASON = 36, |
| 1115 |
/* Array of nested attributes, BSSID and status code, used by subcommand |
| 1116 |
* QCA_NL80211_VENDOR_SUBCMD_FETCH_BSS_TRANSITION_STATUS, where each |
| 1117 |
* entry is taken from enum qca_wlan_vendor_attr_btm_candidate_info. |
| 1118 |
* The userspace space specifies the list/array of candidate BSSIDs in |
| 1119 |
* the order of preference in the request. The driver specifies the |
| 1120 |
* status code, for each BSSID in the list, in the response. The |
| 1121 |
* acceptable candidates are listed in the order preferred by the |
| 1122 |
* driver. |
| 1123 |
*/ |
| 1124 |
QCA_WLAN_VENDOR_ATTR_BTM_CANDIDATE_INFO = 37, |
| 1125 |
/* Used in QCA_NL80211_VENDOR_SUBCMD_BRP_SET_ANT_LIMIT command |
| 1126 |
* See enum qca_wlan_vendor_attr_brp_ant_limit_mode. |
| 1127 |
*/ |
| 1128 |
QCA_WLAN_VENDOR_ATTR_BRP_ANT_LIMIT_MODE = 38, |
| 1129 |
/* Used in QCA_NL80211_VENDOR_SUBCMD_BRP_SET_ANT_LIMIT command |
| 1130 |
* to define the number of antennas to use for BRP. |
| 1131 |
* different purpose in each ANT_LIMIT_MODE: |
| 1132 |
* DISABLE - ignored |
| 1133 |
* EFFECTIVE - upper limit to number of antennas to be used |
| 1134 |
* FORCE - exact number of antennas to be used |
| 1135 |
* unsigned 8 bit value |
| 1136 |
*/ |
| 1137 |
QCA_WLAN_VENDOR_ATTR_BRP_ANT_NUM_LIMIT = 39, |
| 1138 |
/* Used in QCA_NL80211_VENDOR_SUBCMD_GET_CHAIN_RSSI command |
| 1139 |
* to report the corresponding antenna index to the chain RSSI value |
| 1140 |
*/ |
| 1141 |
QCA_WLAN_VENDOR_ATTR_ANTENNA_INFO = 40, |
| 1142 |
/* Used in QCA_NL80211_VENDOR_SUBCMD_GET_CHAIN_RSSI command to report |
| 1143 |
* the specific antenna EVM value (unsigned 32 bit value). With a |
| 1144 |
* determinate group of antennas, the driver specifies the EVM value |
| 1145 |
* for each antenna ID, and application extract them in user space. |
| 1146 |
*/ |
| 1147 |
QCA_WLAN_VENDOR_ATTR_CHAIN_EVM = 41, |
| 1148 |
/* |
| 1149 |
* Used in QCA_NL80211_VENDOR_SUBCMD_GET_FW_STATE command to report |
| 1150 |
* wlan firmware current state. FW state is an unsigned 8 bit value, |
| 1151 |
* one of the values in enum qca_wlan_vendor_attr_fw_state. |
| 1152 |
*/ |
| 1153 |
QCA_WLAN_VENDOR_ATTR_FW_STATE = 42, |
| 1154 |
|
| 1155 |
/* Unsigned 32-bitmask value from enum qca_set_band. Substitutes the |
| 1156 |
* attribute QCA_WLAN_VENDOR_ATTR_SETBAND_VALUE for which only a subset |
| 1157 |
* of single values from enum qca_set_band are valid. This attribute |
| 1158 |
* uses bitmask combinations to define the respective allowed band |
| 1159 |
* combinations and this attributes takes precedence over |
| 1160 |
* QCA_WLAN_VENDOR_ATTR_SETBAND_VALUE if both attributes are included. |
| 1161 |
*/ |
| 1162 |
QCA_WLAN_VENDOR_ATTR_SETBAND_MASK = 43, |
| 1163 |
|
| 1164 |
/* keep last */ |
| 1165 |
QCA_WLAN_VENDOR_ATTR_AFTER_LAST, |
| 1166 |
QCA_WLAN_VENDOR_ATTR_MAX = QCA_WLAN_VENDOR_ATTR_AFTER_LAST - 1, |
| 1167 |
}; |
| 1168 |
|
| 1169 |
enum qca_roaming_policy { |
| 1170 |
QCA_ROAMING_NOT_ALLOWED, |
| 1171 |
QCA_ROAMING_ALLOWED_WITHIN_ESS, |
| 1172 |
}; |
| 1173 |
|
| 1174 |
/** |
| 1175 |
* enum qca_roam_reason - Represents the reason codes for roaming. Used by |
| 1176 |
* QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_REASON. |
| 1177 |
* |
| 1178 |
* @QCA_ROAM_REASON_UNKNOWN: Any reason that do not classify under the below |
| 1179 |
* reasons. |
| 1180 |
* |
| 1181 |
* @QCA_ROAM_REASON_PER: Roam triggered when packet error rates (PER) breached |
| 1182 |
* the configured threshold. |
| 1183 |
* |
| 1184 |
* @QCA_ROAM_REASON_BEACON_MISS: Roam triggered due to the continuous configured |
| 1185 |
* beacon misses from the then connected AP. |
| 1186 |
* |
| 1187 |
* @QCA_ROAM_REASON_POOR_RSSI: Roam triggered due to the poor RSSI reported |
| 1188 |
* by the connected AP. |
| 1189 |
* |
| 1190 |
* @QCA_ROAM_REASON_BETTER_RSSI: Roam triggered for finding a BSS with a better |
| 1191 |
* RSSI than the connected BSS. Here the RSSI of the current BSS is not poor. |
| 1192 |
* |
| 1193 |
* @QCA_ROAM_REASON_CONGESTION: Roam triggered considering the connected channel |
| 1194 |
* or environment being very noisy or congested. |
| 1195 |
* |
| 1196 |
* @QCA_ROAM_REASON_USER_TRIGGER: Roam triggered due to an explicit request |
| 1197 |
* from the user (user space). |
| 1198 |
* |
| 1199 |
* @QCA_ROAM_REASON_BTM: Roam triggered due to BTM Request frame received from |
| 1200 |
* the connected AP. |
| 1201 |
* |
| 1202 |
* @QCA_ROAM_REASON_BSS_LOAD: Roam triggered due to the channel utilization |
| 1203 |
* breaching out the configured threshold. |
| 1204 |
* |
| 1205 |
* @QCA_ROAM_REASON_WTC: Roam triggered due to Wireless to Cellular BSS |
| 1206 |
* transition request. |
| 1207 |
* |
| 1208 |
* @QCA_ROAM_REASON_IDLE: Roam triggered when device is suspended, there is no |
| 1209 |
* data activity with the AP and the current RSSI falls below a certain |
| 1210 |
* threshold. |
| 1211 |
* |
| 1212 |
* @QCA_ROAM_REASON_DISCONNECTION: Roam triggered due to Deauthentication or |
| 1213 |
* Disassociation frames received from the connected AP. |
| 1214 |
* |
| 1215 |
* @QCA_ROAM_REASON_PERIODIC_TIMER: Roam triggered as part of the periodic scan |
| 1216 |
* that happens when there is no candidate AP found during the poor RSSI scan |
| 1217 |
* trigger. |
| 1218 |
* |
| 1219 |
* @QCA_ROAM_REASON_BACKGROUND_SCAN: Roam triggered based on the scan results |
| 1220 |
* obtained from an external scan (not aimed at roaming). |
| 1221 |
* |
| 1222 |
* @QCA_ROAM_REASON_BT_ACTIVITY: Roam triggered due to Bluetooth connection is |
| 1223 |
* established when the station is connected in the 2.4 GHz band. |
| 1224 |
*/ |
| 1225 |
enum qca_roam_reason { |
| 1226 |
QCA_ROAM_REASON_UNKNOWN, |
| 1227 |
QCA_ROAM_REASON_PER, |
| 1228 |
QCA_ROAM_REASON_BEACON_MISS, |
| 1229 |
QCA_ROAM_REASON_POOR_RSSI, |
| 1230 |
QCA_ROAM_REASON_BETTER_RSSI, |
| 1231 |
QCA_ROAM_REASON_CONGESTION, |
| 1232 |
QCA_ROAM_REASON_USER_TRIGGER, |
| 1233 |
QCA_ROAM_REASON_BTM, |
| 1234 |
QCA_ROAM_REASON_BSS_LOAD, |
| 1235 |
QCA_ROAM_REASON_WTC, |
| 1236 |
QCA_ROAM_REASON_IDLE, |
| 1237 |
QCA_ROAM_REASON_DISCONNECTION, |
| 1238 |
QCA_ROAM_REASON_PERIODIC_TIMER, |
| 1239 |
QCA_ROAM_REASON_BACKGROUND_SCAN, |
| 1240 |
QCA_ROAM_REASON_BT_ACTIVITY, |
| 1241 |
}; |
| 1242 |
|
| 1243 |
enum qca_wlan_vendor_attr_roam_auth { |
| 1244 |
QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_INVALID = 0, |
| 1245 |
QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_BSSID, |
| 1246 |
QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_REQ_IE, |
| 1247 |
QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_RESP_IE, |
| 1248 |
QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_AUTHORIZED, |
| 1249 |
QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_KEY_REPLAY_CTR, |
| 1250 |
QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_PTK_KCK, |
| 1251 |
QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_PTK_KEK, |
| 1252 |
QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_SUBNET_STATUS, |
| 1253 |
/* Indicates the status of re-association requested by user space for |
| 1254 |
* the BSSID specified by QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_BSSID. |
| 1255 |
* Type u16. |
| 1256 |
* Represents the status code from AP. Use |
| 1257 |
* %WLAN_STATUS_UNSPECIFIED_FAILURE if the device cannot give you the |
| 1258 |
* real status code for failures. |
| 1259 |
*/ |
| 1260 |
QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_STATUS, |
| 1261 |
/* This attribute indicates that the old association was maintained when |
| 1262 |
* a re-association is requested by user space and that re-association |
| 1263 |
* attempt fails (i.e., cannot connect to the requested BSS, but can |
| 1264 |
* remain associated with the BSS with which the association was in |
| 1265 |
* place when being requested to roam). Used along with |
| 1266 |
* WLAN_VENDOR_ATTR_ROAM_AUTH_STATUS to indicate the current |
| 1267 |
* re-association status. Type flag. |
| 1268 |
* This attribute is applicable only for re-association failure cases. |
| 1269 |
*/ |
| 1270 |
QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_RETAIN_CONNECTION, |
| 1271 |
/* This attribute specifies the PMK if one was newly generated during |
| 1272 |
* FILS roaming. This is added to the PMKSA cache and is used in |
| 1273 |
* subsequent connections with PMKSA caching. |
| 1274 |
*/ |
| 1275 |
QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_PMK = 11, |
| 1276 |
/* This attribute specifies the PMKID used/generated for the current |
| 1277 |
* FILS roam. This is used in subsequent connections with PMKSA caching. |
| 1278 |
*/ |
| 1279 |
QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_PMKID = 12, |
| 1280 |
/* A 16-bit unsigned value specifying the next sequence number to use |
| 1281 |
* in ERP message in the currently associated realm. This is used in |
| 1282 |
* doing subsequent ERP based connections in the same realm. |
| 1283 |
*/ |
| 1284 |
QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_FILS_ERP_NEXT_SEQ_NUM = 13, |
| 1285 |
/* A 16-bit unsigned value representing the reasons for the roaming. |
| 1286 |
* Defined by enum qca_roam_reason. |
| 1287 |
*/ |
| 1288 |
QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_REASON = 14, |
| 1289 |
|
| 1290 |
/* keep last */ |
| 1291 |
QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_AFTER_LAST, |
| 1292 |
QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_MAX = |
| 1293 |
QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_AFTER_LAST - 1 |
| 1294 |
}; |
| 1295 |
|
| 1296 |
enum qca_wlan_vendor_attr_p2p_listen_offload { |
| 1297 |
QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_INVALID = 0, |
| 1298 |
/* A 32-bit unsigned value; the P2P listen frequency (MHz); must be one |
| 1299 |
* of the social channels. |
| 1300 |
*/ |
| 1301 |
QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_CHANNEL, |
| 1302 |
/* A 32-bit unsigned value; the P2P listen offload period (ms). |
| 1303 |
*/ |
| 1304 |
QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_PERIOD, |
| 1305 |
/* A 32-bit unsigned value; the P2P listen interval duration (ms). |
| 1306 |
*/ |
| 1307 |
QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_INTERVAL, |
| 1308 |
/* A 32-bit unsigned value; number of interval times the firmware needs |
| 1309 |
* to run the offloaded P2P listen operation before it stops. |
| 1310 |
*/ |
| 1311 |
QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_COUNT, |
| 1312 |
/* An array of arbitrary binary data with one or more 8-byte values. |
| 1313 |
* The device types include both primary and secondary device types. |
| 1314 |
*/ |
| 1315 |
QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_DEVICE_TYPES, |
| 1316 |
/* An array of unsigned 8-bit characters; vendor information elements. |
| 1317 |
*/ |
| 1318 |
QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_VENDOR_IE, |
| 1319 |
/* A 32-bit unsigned value; a control flag to indicate whether listen |
| 1320 |
* results need to be flushed to wpa_supplicant. |
| 1321 |
*/ |
| 1322 |
QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_CTRL_FLAG, |
| 1323 |
/* A 8-bit unsigned value; reason code for P2P listen offload stop |
| 1324 |
* event. |
| 1325 |
*/ |
| 1326 |
QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_STOP_REASON, |
| 1327 |
/* keep last */ |
| 1328 |
QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_AFTER_LAST, |
| 1329 |
QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_MAX = |
| 1330 |
QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_AFTER_LAST - 1 |
| 1331 |
}; |
| 1332 |
|
| 1333 |
/** |
| 1334 |
* enum qca_wlan_vendor_attr_acs_offload - Defines attributes to be used with |
| 1335 |
* vendor command/event QCA_NL80211_VENDOR_SUBCMD_DO_ACS. |
| 1336 |
* |
| 1337 |
* @QCA_WLAN_VENDOR_ATTR_ACS_PRIMARY_CHANNEL: Required (u8). |
| 1338 |
* Used with event to notify the primary channel number selected in ACS |
| 1339 |
* operation. |
| 1340 |
* Note: If both the driver and user-space application supports the 6 GHz band, |
| 1341 |
* QCA_WLAN_VENDOR_ATTR_ACS_PRIMARY_CHANNEL is deprecated; use |
| 1342 |
* QCA_WLAN_VENDOR_ATTR_ACS_PRIMARY_FREQUENCY instead. |
| 1343 |
* To maintain backward compatibility, QCA_WLAN_VENDOR_ATTR_ACS_PRIMARY_CHANNEL |
| 1344 |
* is still used if either of the driver or user space application doesn't |
| 1345 |
* support the 6 GHz band. |
| 1346 |
* |
| 1347 |
* @QCA_WLAN_VENDOR_ATTR_ACS_SECONDARY_CHANNEL: Required (u8). |
| 1348 |
* Used with event to notify the secondary channel number selected in ACS |
| 1349 |
* operation. |
| 1350 |
* Note: If both the driver and user-space application supports the 6 GHz band, |
| 1351 |
* QCA_WLAN_VENDOR_ATTR_ACS_SECONDARY_CHANNEL is deprecated; use |
| 1352 |
* QCA_WLAN_VENDOR_ATTR_ACS_SECONDARY_FREQUENCY instead. |
| 1353 |
* To maintain backward compatibility, |
| 1354 |
* QCA_WLAN_VENDOR_ATTR_ACS_SECONDARY_CHANNEL is still used if either of |
| 1355 |
* the driver or user space application doesn't support 6 GHz band. |
| 1356 |
* |
| 1357 |
* @QCA_WLAN_VENDOR_ATTR_ACS_HW_MODE: Required (u8). |
| 1358 |
* (a) Used with command to configure hw_mode from |
| 1359 |
* enum qca_wlan_vendor_acs_hw_mode for ACS operation. |
| 1360 |
* (b) Also used with event to notify the hw_mode of selected primary channel |
| 1361 |
* in ACS operation. |
| 1362 |
* |
| 1363 |
* @QCA_WLAN_VENDOR_ATTR_ACS_HT_ENABLED: Flag attribute. |
| 1364 |
* Used with command to configure ACS operation for HT mode. |
| 1365 |
* Disable (flag attribute not present) - HT disabled and |
| 1366 |
* Enable (flag attribute present) - HT enabled. |
| 1367 |
* |
| 1368 |
* @QCA_WLAN_VENDOR_ATTR_ACS_HT40_ENABLED: Flag attribute. |
| 1369 |
* Used with command to configure ACS operation for HT40 mode. |
| 1370 |
* Disable (flag attribute not present) - HT40 disabled and |
| 1371 |
* Enable (flag attribute present) - HT40 enabled. |
| 1372 |
* |
| 1373 |
* @QCA_WLAN_VENDOR_ATTR_ACS_VHT_ENABLED: Flag attribute. |
| 1374 |
* Used with command to configure ACS operation for VHT mode. |
| 1375 |
* Disable (flag attribute not present) - VHT disabled and |
| 1376 |
* Enable (flag attribute present) - VHT enabled. |
| 1377 |
* |
| 1378 |
* @QCA_WLAN_VENDOR_ATTR_ACS_CHWIDTH: Optional (u16) with command and |
| 1379 |
* mandatory with event. |
| 1380 |
* If specified in command path, ACS operation is configured with the given |
| 1381 |
* channel width (in MHz). |
| 1382 |
* In event path, specifies the channel width of the primary channel selected. |
| 1383 |
* |
| 1384 |
* @QCA_WLAN_VENDOR_ATTR_ACS_CH_LIST: Required and type is NLA_UNSPEC. |
| 1385 |
* Used with command to configure channel list using an array of |
| 1386 |
* channel numbers (u8). |
| 1387 |
* Note: If both the driver and user-space application supports the 6 GHz band, |
| 1388 |
* the driver mandates use of QCA_WLAN_VENDOR_ATTR_ACS_FREQ_LIST whereas |
| 1389 |
* QCA_WLAN_VENDOR_ATTR_ACS_CH_LIST is optional. |
| 1390 |
* |
| 1391 |
* @QCA_WLAN_VENDOR_ATTR_ACS_VHT_SEG0_CENTER_CHANNEL: Required (u8). |
| 1392 |
* Used with event to notify the VHT segment 0 center channel number selected in |
| 1393 |
* ACS operation. The value is the index of the channel center frequency for |
| 1394 |
* 20 MHz, 40 MHz, and 80 MHz channels. The value is the center frequency index |
| 1395 |
* of the primary 80 MHz segment for 160 MHz and 80+80 MHz channels. |
| 1396 |
* Note: If both the driver and user-space application supports the 6 GHz band, |
| 1397 |
* QCA_WLAN_VENDOR_ATTR_ACS_VHT_SEG0_CENTER_CHANNEL is deprecated; use |
| 1398 |
* QCA_WLAN_VENDOR_ATTR_ACS_VHT_SEG0_CENTER_FREQUENCY instead. |
| 1399 |
* To maintain backward compatibility, |
| 1400 |
* QCA_WLAN_VENDOR_ATTR_ACS_VHT_SEG0_CENTER_CHANNEL is still used if either of |
| 1401 |
* the driver or user space application doesn't support the 6 GHz band. |
| 1402 |
* |
| 1403 |
* @QCA_WLAN_VENDOR_ATTR_ACS_VHT_SEG1_CENTER_CHANNEL: Required (u8). |
| 1404 |
* Used with event to notify the VHT segment 1 center channel number selected in |
| 1405 |
* ACS operation. The value is zero for 20 MHz, 40 MHz, and 80 MHz channels. |
| 1406 |
* The value is the index of the channel center frequency for 160 MHz channels |
| 1407 |
* and the center frequency index of the secondary 80 MHz segment for 80+80 MHz |
| 1408 |
* channels. |
| 1409 |
* Note: If both the driver and user-space application supports the 6 GHz band, |
| 1410 |
* QCA_WLAN_VENDOR_ATTR_ACS_VHT_SEG1_CENTER_CHANNEL is deprecated; use |
| 1411 |
* QCA_WLAN_VENDOR_ATTR_ACS_VHT_SEG1_CENTER_FREQUENCY instead. |
| 1412 |
* To maintain backward compatibility, |
| 1413 |
* QCA_WLAN_VENDOR_ATTR_ACS_VHT_SEG1_CENTER_CHANNEL is still used if either of |
| 1414 |
* the driver or user space application doesn't support the 6 GHz band. |
| 1415 |
* |
| 1416 |
* @QCA_WLAN_VENDOR_ATTR_ACS_FREQ_LIST: Required and type is NLA_UNSPEC. |
| 1417 |
* Used with command to configure the channel list using an array of channel |
| 1418 |
* center frequencies in MHz (u32). |
| 1419 |
* Note: If both the driver and user-space application supports the 6 GHz band, |
| 1420 |
* the driver first parses the frequency list and if it fails to get a frequency |
| 1421 |
* list, parses the channel list specified using |
| 1422 |
* QCA_WLAN_VENDOR_ATTR_ACS_CH_LIST (considers only 2 GHz and 5 GHz channels in |
| 1423 |
* QCA_WLAN_VENDOR_ATTR_ACS_CH_LIST). |
| 1424 |
* |
| 1425 |
* @QCA_WLAN_VENDOR_ATTR_ACS_PRIMARY_FREQUENCY: Required (u32). |
| 1426 |
* Used with event to notify the primary channel center frequency (MHz) selected |
| 1427 |
* in ACS operation. |
| 1428 |
* Note: If the driver supports the 6 GHz band, the event sent from the driver |
| 1429 |
* includes this attribute along with QCA_WLAN_VENDOR_ATTR_ACS_PRIMARY_CHANNEL. |
| 1430 |
* |
| 1431 |
* @QCA_WLAN_VENDOR_ATTR_ACS_SECONDARY_FREQUENCY: Required (u32). |
| 1432 |
* Used with event to notify the secondary channel center frequency (MHz) |
| 1433 |
* selected in ACS operation. |
| 1434 |
* Note: If the driver supports the 6 GHz band, the event sent from the driver |
| 1435 |
* includes this attribute along with |
| 1436 |
* QCA_WLAN_VENDOR_ATTR_ACS_SECONDARY_CHANNEL. |
| 1437 |
* |
| 1438 |
* @QCA_WLAN_VENDOR_ATTR_ACS_VHT_SEG0_CENTER_FREQUENCY: Required (u32). |
| 1439 |
* Used with event to notify the VHT segment 0 center channel frequency (MHz) |
| 1440 |
* selected in ACS operation. |
| 1441 |
* Note: If the driver supports the 6 GHz band, the event sent from the driver |
| 1442 |
* includes this attribute along with |
| 1443 |
* QCA_WLAN_VENDOR_ATTR_ACS_VHT_SEG0_CENTER_CHANNEL. |
| 1444 |
* |
| 1445 |
* @QCA_WLAN_VENDOR_ATTR_ACS_VHT_SEG1_CENTER_FREQUENCY: Required (u32). |
| 1446 |
* Used with event to notify the VHT segment 1 center channel frequency (MHz) |
| 1447 |
* selected in ACS operation. |
| 1448 |
* Note: If the driver supports the 6 GHz band, the event sent from the driver |
| 1449 |
* includes this attribute along with |
| 1450 |
* QCA_WLAN_VENDOR_ATTR_ACS_VHT_SEG1_CENTER_CHANNEL. |
| 1451 |
* |
| 1452 |
* @QCA_WLAN_VENDOR_ATTR_ACS_EDMG_ENABLED: Flag attribute. |
| 1453 |
* Used with command to notify the driver of EDMG request for ACS |
| 1454 |
* operation. |
| 1455 |
* |
| 1456 |
* @QCA_WLAN_VENDOR_ATTR_ACS_EDMG_CHANNEL: Optional (u8). |
| 1457 |
* Used with event to notify the EDMG channel number selected in ACS |
| 1458 |
* operation. |
| 1459 |
* EDMG primary channel is indicated by QCA_WLAN_VENDOR_ATTR_ACS_PRIMARY_CHANNEL |
| 1460 |
* |
| 1461 |
* @QCA_WLAN_VENDOR_ATTR_ACS_PUNCTURE_BITMAP: Optional (u16). |
| 1462 |
* Used with event to notify the puncture pattern selected in ACS operation. |
| 1463 |
* Encoding for this attribute will follow the convention used in the Disabled |
| 1464 |
* Subchannel Bitmap field of the EHT Operation IE. |
| 1465 |
* |
| 1466 |
* @QCA_WLAN_VENDOR_ATTR_ACS_EHT_ENABLED: Flag attribute. |
| 1467 |
* Used with command to configure ACS operation for EHT mode. |
| 1468 |
* Disable (flag attribute not present) - EHT disabled and |
| 1469 |
* Enable (flag attribute present) - EHT enabled. |
| 1470 |
*/ |
| 1471 |
enum qca_wlan_vendor_attr_acs_offload { |
| 1472 |
QCA_WLAN_VENDOR_ATTR_ACS_CHANNEL_INVALID = 0, |
| 1473 |
QCA_WLAN_VENDOR_ATTR_ACS_PRIMARY_CHANNEL = 1, |
| 1474 |
QCA_WLAN_VENDOR_ATTR_ACS_SECONDARY_CHANNEL = 2, |
| 1475 |
QCA_WLAN_VENDOR_ATTR_ACS_HW_MODE = 3, |
| 1476 |
QCA_WLAN_VENDOR_ATTR_ACS_HT_ENABLED = 4, |
| 1477 |
QCA_WLAN_VENDOR_ATTR_ACS_HT40_ENABLED = 5, |
| 1478 |
QCA_WLAN_VENDOR_ATTR_ACS_VHT_ENABLED = 6, |
| 1479 |
QCA_WLAN_VENDOR_ATTR_ACS_CHWIDTH = 7, |
| 1480 |
QCA_WLAN_VENDOR_ATTR_ACS_CH_LIST = 8, |
| 1481 |
QCA_WLAN_VENDOR_ATTR_ACS_VHT_SEG0_CENTER_CHANNEL = 9, |
| 1482 |
QCA_WLAN_VENDOR_ATTR_ACS_VHT_SEG1_CENTER_CHANNEL = 10, |
| 1483 |
QCA_WLAN_VENDOR_ATTR_ACS_FREQ_LIST = 11, |
| 1484 |
QCA_WLAN_VENDOR_ATTR_ACS_PRIMARY_FREQUENCY = 12, |
| 1485 |
QCA_WLAN_VENDOR_ATTR_ACS_SECONDARY_FREQUENCY = 13, |
| 1486 |
QCA_WLAN_VENDOR_ATTR_ACS_VHT_SEG0_CENTER_FREQUENCY = 14, |
| 1487 |
QCA_WLAN_VENDOR_ATTR_ACS_VHT_SEG1_CENTER_FREQUENCY = 15, |
| 1488 |
QCA_WLAN_VENDOR_ATTR_ACS_EDMG_ENABLED = 16, |
| 1489 |
QCA_WLAN_VENDOR_ATTR_ACS_EDMG_CHANNEL = 17, |
| 1490 |
QCA_WLAN_VENDOR_ATTR_ACS_PUNCTURE_BITMAP = 18, |
| 1491 |
QCA_WLAN_VENDOR_ATTR_ACS_EHT_ENABLED = 19, |
| 1492 |
|
| 1493 |
/* keep last */ |
| 1494 |
QCA_WLAN_VENDOR_ATTR_ACS_AFTER_LAST, |
| 1495 |
QCA_WLAN_VENDOR_ATTR_ACS_MAX = |
| 1496 |
QCA_WLAN_VENDOR_ATTR_ACS_AFTER_LAST - 1 |
| 1497 |
}; |
| 1498 |
|
| 1499 |
/** |
| 1500 |
* enum qca_wlan_vendor_acs_hw_mode - Defines HW mode to be used with the |
| 1501 |
* vendor command/event QCA_NL80211_VENDOR_SUBCMD_DO_ACS. |
| 1502 |
* |
| 1503 |
* @QCA_ACS_MODE_IEEE80211B: 802.11b mode |
| 1504 |
* @QCA_ACS_MODE_IEEE80211G: 802.11g mode |
| 1505 |
* @QCA_ACS_MODE_IEEE80211A: 802.11a mode |
| 1506 |
* @QCA_ACS_MODE_IEEE80211AD: 802.11ad mode |
| 1507 |
* @QCA_ACS_MODE_IEEE80211ANY: all modes |
| 1508 |
* @QCA_ACS_MODE_IEEE80211AX: 802.11ax mode |
| 1509 |
*/ |
| 1510 |
enum qca_wlan_vendor_acs_hw_mode { |
| 1511 |
QCA_ACS_MODE_IEEE80211B, |
| 1512 |
QCA_ACS_MODE_IEEE80211G, |
| 1513 |
QCA_ACS_MODE_IEEE80211A, |
| 1514 |
QCA_ACS_MODE_IEEE80211AD, |
| 1515 |
QCA_ACS_MODE_IEEE80211ANY, |
| 1516 |
QCA_ACS_MODE_IEEE80211AX, |
| 1517 |
}; |
| 1518 |
|
| 1519 |
/** |
| 1520 |
* enum qca_wlan_vendor_features - Vendor device/driver feature flags |
| 1521 |
* |
| 1522 |
* @QCA_WLAN_VENDOR_FEATURE_KEY_MGMT_OFFLOAD: Device supports key |
| 1523 |
* management offload, a mechanism where the station's firmware |
| 1524 |
* does the exchange with the AP to establish the temporal keys |
| 1525 |
* after roaming, rather than having the user space wpa_supplicant do it. |
| 1526 |
* @QCA_WLAN_VENDOR_FEATURE_SUPPORT_HW_MODE_ANY: Device supports automatic |
| 1527 |
* band selection based on channel selection results. |
| 1528 |
* @QCA_WLAN_VENDOR_FEATURE_OFFCHANNEL_SIMULTANEOUS: Device supports |
| 1529 |
* simultaneous off-channel operations. |
| 1530 |
* @QCA_WLAN_VENDOR_FEATURE_P2P_LISTEN_OFFLOAD: Device supports P2P |
| 1531 |
* Listen offload; a mechanism where the station's firmware takes care of |
| 1532 |
* responding to incoming Probe Request frames received from other P2P |
| 1533 |
* Devices whilst in Listen state, rather than having the user space |
| 1534 |
* wpa_supplicant do it. Information from received P2P requests are |
| 1535 |
* forwarded from firmware to host whenever the host processor wakes up. |
| 1536 |
* @QCA_WLAN_VENDOR_FEATURE_OCE_STA: Device supports all OCE non-AP STA |
| 1537 |
* specific features. |
| 1538 |
* @QCA_WLAN_VENDOR_FEATURE_OCE_AP: Device supports all OCE AP specific |
| 1539 |
* features. |
| 1540 |
* @QCA_WLAN_VENDOR_FEATURE_OCE_STA_CFON: Device supports OCE STA-CFON |
| 1541 |
* specific features only. If a Device sets this bit but not the |
| 1542 |
* %QCA_WLAN_VENDOR_FEATURE_OCE_AP, the userspace shall assume that |
| 1543 |
* this Device may not support all OCE AP functionalities but can support |
| 1544 |
* only OCE STA-CFON functionalities. |
| 1545 |
* @QCA_WLAN_VENDOR_FEATURE_SELF_MANAGED_REGULATORY: Device supports self |
| 1546 |
* managed regulatory. |
| 1547 |
* @QCA_WLAN_VENDOR_FEATURE_TWT: Device supports TWT (Target Wake Time). |
| 1548 |
* @QCA_WLAN_VENDOR_FEATURE_11AX: Device supports 802.11ax (HE) |
| 1549 |
* @QCA_WLAN_VENDOR_FEATURE_6GHZ_SUPPORT: Device supports 6 GHz band operation |
| 1550 |
* @QCA_WLAN_VENDOR_FEATURE_THERMAL_CONFIG: Device is capable of receiving |
| 1551 |
* and applying thermal configuration through |
| 1552 |
* %QCA_WLAN_VENDOR_ATTR_THERMAL_LEVEL and |
| 1553 |
* %QCA_WLAN_VENDOR_ATTR_THERMAL_COMPLETION_WINDOW attributes from |
| 1554 |
* userspace. |
| 1555 |
* @QCA_WLAN_VENDOR_FEATURE_ADAPTIVE_11R: Device supports Adaptive 11r. |
| 1556 |
* With Adaptive 11r feature, access points advertise the vendor |
| 1557 |
* specific IEs and MDE but do not include FT AKM in the RSNE. |
| 1558 |
* The Adaptive 11r supported stations are expected to identify |
| 1559 |
* such vendor specific IEs and connect to the AP in FT mode though |
| 1560 |
* the profile is configured in non-FT mode. |
| 1561 |
* The driver-based SME cases also need to have this support for |
| 1562 |
* Adaptive 11r to handle the connection and roaming scenarios. |
| 1563 |
* This flag indicates the support for the same to the user space. |
| 1564 |
* @QCA_WLAN_VENDOR_FEATURE_CONCURRENT_BAND_SESSIONS: Device supports |
| 1565 |
* concurrent network sessions on different Wi-Fi bands. This feature |
| 1566 |
* capability is attributed to the hardware's capability to support |
| 1567 |
* the same (e.g., DBS). |
| 1568 |
* @QCA_WLAN_VENDOR_FEATURE_TWT_ASYNC_SUPPORT: Flag indicating whether the |
| 1569 |
* responses for the respective TWT operations are asynchronous (separate |
| 1570 |
* event message) from the driver. If not specified, the responses are |
| 1571 |
* synchronous (in vendor command reply) to the request. Each TWT |
| 1572 |
* operation is specifically mentioned (against its respective |
| 1573 |
* documentation) to support either of these or both modes. |
| 1574 |
* @NUM_QCA_WLAN_VENDOR_FEATURES: Number of assigned feature bits |
| 1575 |
*/ |
| 1576 |
enum qca_wlan_vendor_features { |
| 1577 |
QCA_WLAN_VENDOR_FEATURE_KEY_MGMT_OFFLOAD = 0, |
| 1578 |
QCA_WLAN_VENDOR_FEATURE_SUPPORT_HW_MODE_ANY = 1, |
| 1579 |
QCA_WLAN_VENDOR_FEATURE_OFFCHANNEL_SIMULTANEOUS = 2, |
| 1580 |
QCA_WLAN_VENDOR_FEATURE_P2P_LISTEN_OFFLOAD = 3, |
| 1581 |
QCA_WLAN_VENDOR_FEATURE_OCE_STA = 4, |
| 1582 |
QCA_WLAN_VENDOR_FEATURE_OCE_AP = 5, |
| 1583 |
QCA_WLAN_VENDOR_FEATURE_OCE_STA_CFON = 6, |
| 1584 |
QCA_WLAN_VENDOR_FEATURE_SELF_MANAGED_REGULATORY = 7, |
| 1585 |
QCA_WLAN_VENDOR_FEATURE_TWT = 8, |
| 1586 |
QCA_WLAN_VENDOR_FEATURE_11AX = 9, |
| 1587 |
QCA_WLAN_VENDOR_FEATURE_6GHZ_SUPPORT = 10, |
| 1588 |
QCA_WLAN_VENDOR_FEATURE_THERMAL_CONFIG = 11, |
| 1589 |
QCA_WLAN_VENDOR_FEATURE_ADAPTIVE_11R = 12, |
| 1590 |
QCA_WLAN_VENDOR_FEATURE_CONCURRENT_BAND_SESSIONS = 13, |
| 1591 |
QCA_WLAN_VENDOR_FEATURE_TWT_ASYNC_SUPPORT = 14, |
| 1592 |
NUM_QCA_WLAN_VENDOR_FEATURES /* keep last */ |
| 1593 |
}; |
| 1594 |
|
| 1595 |
/** |
| 1596 |
* enum qca_wlan_vendor_attr_data_offload_ind - Vendor Data Offload Indication |
| 1597 |
* |
| 1598 |
* @QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_SESSION: Session corresponding to |
| 1599 |
* the offloaded data. |
| 1600 |
* @QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_PROTOCOL: Protocol of the offloaded |
| 1601 |
* data. |
| 1602 |
* @QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_EVENT: Event type for the data offload |
| 1603 |
* indication. |
| 1604 |
*/ |
| 1605 |
enum qca_wlan_vendor_attr_data_offload_ind { |
| 1606 |
QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_INVALID = 0, |
| 1607 |
QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_SESSION, |
| 1608 |
QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_PROTOCOL, |
| 1609 |
QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_EVENT, |
| 1610 |
|
| 1611 |
/* keep last */ |
| 1612 |
QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_AFTER_LAST, |
| 1613 |
QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_MAX = |
| 1614 |
QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_AFTER_LAST - 1 |
| 1615 |
}; |
| 1616 |
|
| 1617 |
/** |
| 1618 |
* enum qca_wlan_vendor_attr_ocb_set_config - Vendor subcmd attributes to set |
| 1619 |
* OCB config |
| 1620 |
* |
| 1621 |
* @QCA_WLAN_VENDOR_ATTR_OCB_SET_CONFIG_CHANNEL_COUNT: Number of channels in the |
| 1622 |
* configuration |
| 1623 |
* @QCA_WLAN_VENDOR_ATTR_OCB_SET_CONFIG_SCHEDULE_SIZE: Size of the schedule |
| 1624 |
* @QCA_WLAN_VENDOR_ATTR_OCB_SET_CONFIG_CHANNEL_ARRAY: Array of channels |
| 1625 |
* @QCA_WLAN_VENDOR_ATTR_OCB_SET_CONFIG_SCHEDULE_ARRAY: Array of channels to be |
| 1626 |
* scheduled |
| 1627 |
* @QCA_WLAN_VENDOR_ATTR_OCB_SET_CONFIG_NDL_CHANNEL_ARRAY: Array of NDL channel |
| 1628 |
* information |
| 1629 |
* @QCA_WLAN_VENDOR_ATTR_OCB_SET_CONFIG_NDL_ACTIVE_STATE_ARRAY: Array of NDL |
| 1630 |
* active state configuration |
| 1631 |
* @QCA_WLAN_VENDOR_ATTR_OCB_SET_CONFIG_FLAGS: Configuration flags such as |
| 1632 |
* OCB_CONFIG_FLAG_80211_FRAME_MODE |
| 1633 |
* @QCA_WLAN_VENDOR_ATTR_OCB_SET_CONFIG_DEF_TX_PARAM: Default TX parameters to |
| 1634 |
* use in the case that a packet is sent without a TX control header |
| 1635 |
* @QCA_WLAN_VENDOR_ATTR_OCB_SET_CONFIG_TA_MAX_DURATION: Max duration after the |
| 1636 |
* last TA received that the local time set by TA is synchronous to other |
| 1637 |
* communicating OCB STAs. |
| 1638 |
*/ |
| 1639 |
enum qca_wlan_vendor_attr_ocb_set_config { |
| 1640 |
QCA_WLAN_VENDOR_ATTR_OCB_SET_CONFIG_INVALID = 0, |
| 1641 |
QCA_WLAN_VENDOR_ATTR_OCB_SET_CONFIG_CHANNEL_COUNT = 1, |
| 1642 |
QCA_WLAN_VENDOR_ATTR_OCB_SET_CONFIG_SCHEDULE_SIZE = 2, |
| 1643 |
QCA_WLAN_VENDOR_ATTR_OCB_SET_CONFIG_CHANNEL_ARRAY = 3, |
| 1644 |
QCA_WLAN_VENDOR_ATTR_OCB_SET_CONFIG_SCHEDULE_ARRAY = 4, |
| 1645 |
QCA_WLAN_VENDOR_ATTR_OCB_SET_CONFIG_NDL_CHANNEL_ARRAY = 5, |
| 1646 |
QCA_WLAN_VENDOR_ATTR_OCB_SET_CONFIG_NDL_ACTIVE_STATE_ARRAY = 6, |
| 1647 |
QCA_WLAN_VENDOR_ATTR_OCB_SET_CONFIG_FLAGS = 7, |
| 1648 |
QCA_WLAN_VENDOR_ATTR_OCB_SET_CONFIG_DEF_TX_PARAM = 8, |
| 1649 |
QCA_WLAN_VENDOR_ATTR_OCB_SET_CONFIG_TA_MAX_DURATION = 9, |
| 1650 |
QCA_WLAN_VENDOR_ATTR_OCB_SET_CONFIG_AFTER_LAST, |
| 1651 |
QCA_WLAN_VENDOR_ATTR_OCB_SET_CONFIG_MAX = |
| 1652 |
QCA_WLAN_VENDOR_ATTR_OCB_SET_CONFIG_AFTER_LAST - 1 |
| 1653 |
}; |
| 1654 |
|
| 1655 |
/** |
| 1656 |
* enum qca_wlan_vendor_attr_ocb_set_utc_time - Vendor subcmd attributes to set |
| 1657 |
* UTC time |
| 1658 |
* |
| 1659 |
* @QCA_WLAN_VENDOR_ATTR_OCB_SET_UTC_TIME_VALUE: The UTC time as an array of |
| 1660 |
* 10 bytes |
| 1661 |
* @QCA_WLAN_VENDOR_ATTR_OCB_SET_UTC_TIME_ERROR: The time error as an array of |
| 1662 |
* 5 bytes |
| 1663 |
*/ |
| 1664 |
enum qca_wlan_vendor_attr_ocb_set_utc_time { |
| 1665 |
QCA_WLAN_VENDOR_ATTR_OCB_SET_UTC_TIME_INVALID = 0, |
| 1666 |
QCA_WLAN_VENDOR_ATTR_OCB_SET_UTC_TIME_VALUE = 1, |
| 1667 |
QCA_WLAN_VENDOR_ATTR_OCB_SET_UTC_TIME_ERROR = 2, |
| 1668 |
QCA_WLAN_VENDOR_ATTR_OCB_SET_UTC_TIME_AFTER_LAST, |
| 1669 |
QCA_WLAN_VENDOR_ATTR_OCB_SET_UTC_TIME_MAX = |
| 1670 |
QCA_WLAN_VENDOR_ATTR_OCB_SET_UTC_TIME_AFTER_LAST - 1 |
| 1671 |
}; |
| 1672 |
|
| 1673 |
/** |
| 1674 |
* enum qca_wlan_vendor_attr_ocb_start_timing_advert - Vendor subcmd attributes |
| 1675 |
* to start sending timing advert frames |
| 1676 |
* |
| 1677 |
* @QCA_WLAN_VENDOR_ATTR_OCB_START_TIMING_ADVERT_CHANNEL_FREQ: Cannel frequency |
| 1678 |
* on which to send the frames |
| 1679 |
* @QCA_WLAN_VENDOR_ATTR_OCB_START_TIMING_ADVERT_REPEAT_RATE: Number of times |
| 1680 |
* the frame is sent in 5 seconds |
| 1681 |
*/ |
| 1682 |
enum qca_wlan_vendor_attr_ocb_start_timing_advert { |
| 1683 |
QCA_WLAN_VENDOR_ATTR_OCB_START_TIMING_ADVERT_INVALID = 0, |
| 1684 |
QCA_WLAN_VENDOR_ATTR_OCB_START_TIMING_ADVERT_CHANNEL_FREQ = 1, |
| 1685 |
QCA_WLAN_VENDOR_ATTR_OCB_START_TIMING_ADVERT_REPEAT_RATE = 2, |
| 1686 |
QCA_WLAN_VENDOR_ATTR_OCB_START_TIMING_ADVERT_AFTER_LAST, |
| 1687 |
QCA_WLAN_VENDOR_ATTR_OCB_START_TIMING_ADVERT_MAX = |
| 1688 |
QCA_WLAN_VENDOR_ATTR_OCB_START_TIMING_ADVERT_AFTER_LAST - 1 |
| 1689 |
}; |
| 1690 |
|
| 1691 |
/** |
| 1692 |
* enum qca_wlan_vendor_attr_ocb_stop_timing_advert - Vendor subcmd attributes |
| 1693 |
* to stop timing advert |
| 1694 |
* |
| 1695 |
* @QCA_WLAN_VENDOR_ATTR_OCB_STOP_TIMING_ADVERT_CHANNEL_FREQ: The channel |
| 1696 |
* frequency on which to stop the timing advert |
| 1697 |
*/ |
| 1698 |
enum qca_wlan_vendor_attr_ocb_stop_timing_advert { |
| 1699 |
QCA_WLAN_VENDOR_ATTR_OCB_STOP_TIMING_ADVERT_INVALID = 0, |
| 1700 |
QCA_WLAN_VENDOR_ATTR_OCB_STOP_TIMING_ADVERT_CHANNEL_FREQ = 1, |
| 1701 |
QCA_WLAN_VENDOR_ATTR_OCB_STOP_TIMING_ADVERT_AFTER_LAST, |
| 1702 |
QCA_WLAN_VENDOR_ATTR_OCB_STOP_TIMING_ADVERT_MAX = |
| 1703 |
QCA_WLAN_VENDOR_ATTR_OCB_STOP_TIMING_ADVERT_AFTER_LAST - 1 |
| 1704 |
}; |
| 1705 |
|
| 1706 |
/** |
| 1707 |
* enum qca_wlan_vendor_attr_ocb_get_tsf_response - Vendor subcmd attributes to |
| 1708 |
* get TSF timer value |
| 1709 |
* |
| 1710 |
* @QCA_WLAN_VENDOR_ATTR_OCB_GET_TSF_RESP_TIMER_HIGH: Higher 32 bits of the |
| 1711 |
* timer |
| 1712 |
* @QCA_WLAN_VENDOR_ATTR_OCB_GET_TSF_RESP_TIMER_LOW: Lower 32 bits of the timer |
| 1713 |
*/ |
| 1714 |
enum qca_wlan_vendor_attr_ocb_get_tsf_resp { |
| 1715 |
QCA_WLAN_VENDOR_ATTR_OCB_GET_TSF_RESP_INVALID = 0, |
| 1716 |
QCA_WLAN_VENDOR_ATTR_OCB_GET_TSF_RESP_TIMER_HIGH = 1, |
| 1717 |
QCA_WLAN_VENDOR_ATTR_OCB_GET_TSF_RESP_TIMER_LOW = 2, |
| 1718 |
QCA_WLAN_VENDOR_ATTR_OCB_GET_TSF_RESP_AFTER_LAST, |
| 1719 |
QCA_WLAN_VENDOR_ATTR_OCB_GET_TSF_RESP_MAX = |
| 1720 |
QCA_WLAN_VENDOR_ATTR_OCB_GET_TSF_RESP_AFTER_LAST - 1 |
| 1721 |
}; |
| 1722 |
|
| 1723 |
enum qca_vendor_attr_get_preferred_freq_list { |
| 1724 |
QCA_WLAN_VENDOR_ATTR_GET_PREFERRED_FREQ_LIST_INVALID, |
| 1725 |
/* A 32-unsigned value; the interface type/mode for which the preferred |
| 1726 |
* frequency list is requested (see enum qca_iface_type for possible |
| 1727 |
* values); used in GET_PREFERRED_FREQ_LIST command from user-space to |
| 1728 |
* kernel and in the kernel response back to user-space. |
| 1729 |
*/ |
| 1730 |
QCA_WLAN_VENDOR_ATTR_GET_PREFERRED_FREQ_LIST_IFACE_TYPE, |
| 1731 |
/* An array of 32-unsigned values; values are frequency (MHz); sent |
| 1732 |
* from kernel space to user space. |
| 1733 |
*/ |
| 1734 |
QCA_WLAN_VENDOR_ATTR_GET_PREFERRED_FREQ_LIST, |
| 1735 |
/* An array of nested values as per enum qca_wlan_vendor_attr_pcl |
| 1736 |
* attribute. Each element contains frequency (MHz), weight, and flag |
| 1737 |
* bit mask indicating how the frequency should be used in P2P |
| 1738 |
* negotiation; sent from kernel space to user space. |
| 1739 |
*/ |
| 1740 |
QCA_WLAN_VENDOR_ATTR_GET_PREFERRED_FREQ_LIST_WEIGHED_PCL, |
| 1741 |
/* keep last */ |
| 1742 |
QCA_WLAN_VENDOR_ATTR_GET_PREFERRED_FREQ_LIST_AFTER_LAST, |
| 1743 |
QCA_WLAN_VENDOR_ATTR_GET_PREFERRED_FREQ_LIST_MAX = |
| 1744 |
QCA_WLAN_VENDOR_ATTR_GET_PREFERRED_FREQ_LIST_AFTER_LAST - 1 |
| 1745 |
}; |
| 1746 |
|
| 1747 |
enum qca_vendor_attr_probable_oper_channel { |
| 1748 |
QCA_WLAN_VENDOR_ATTR_PROBABLE_OPER_CHANNEL_INVALID, |
| 1749 |
/* 32-bit unsigned value; indicates the connection/iface type likely to |
| 1750 |
* come on this channel (see enum qca_iface_type). |
| 1751 |
*/ |
| 1752 |
QCA_WLAN_VENDOR_ATTR_PROBABLE_OPER_CHANNEL_IFACE_TYPE, |
| 1753 |
/* 32-bit unsigned value; the frequency (MHz) of the probable channel */ |
| 1754 |
QCA_WLAN_VENDOR_ATTR_PROBABLE_OPER_CHANNEL_FREQ, |
| 1755 |
/* keep last */ |
| 1756 |
QCA_WLAN_VENDOR_ATTR_PROBABLE_OPER_CHANNEL_AFTER_LAST, |
| 1757 |
QCA_WLAN_VENDOR_ATTR_PROBABLE_OPER_CHANNEL_MAX = |
| 1758 |
QCA_WLAN_VENDOR_ATTR_PROBABLE_OPER_CHANNEL_AFTER_LAST - 1 |
| 1759 |
}; |
| 1760 |
|
| 1761 |
enum qca_iface_type { |
| 1762 |
QCA_IFACE_TYPE_STA, |
| 1763 |
QCA_IFACE_TYPE_AP, |
| 1764 |
QCA_IFACE_TYPE_P2P_CLIENT, |
| 1765 |
QCA_IFACE_TYPE_P2P_GO, |
| 1766 |
QCA_IFACE_TYPE_IBSS, |
| 1767 |
QCA_IFACE_TYPE_TDLS, |
| 1768 |
}; |
| 1769 |
|
| 1770 |
enum qca_set_band { |
| 1771 |
QCA_SETBAND_AUTO = 0, |
| 1772 |
QCA_SETBAND_5G = BIT(0), |
| 1773 |
QCA_SETBAND_2G = BIT(1), |
| 1774 |
QCA_SETBAND_6G = BIT(2), |
| 1775 |
}; |
| 1776 |
|
| 1777 |
/** |
| 1778 |
* enum qca_access_policy - Access control policy |
| 1779 |
* |
| 1780 |
* Access control policy is applied on the configured IE |
| 1781 |
* (QCA_WLAN_VENDOR_ATTR_CONFIG_ACCESS_POLICY_IE). |
| 1782 |
* To be set with QCA_WLAN_VENDOR_ATTR_CONFIG_ACCESS_POLICY. |
| 1783 |
* |
| 1784 |
* @QCA_ACCESS_POLICY_ACCEPT_UNLESS_LISTED: Deny Wi-Fi connections which match |
| 1785 |
* the specific configuration (IE) set, i.e., allow all the |
| 1786 |
* connections which do not match the configuration. |
| 1787 |
* @QCA_ACCESS_POLICY_DENY_UNLESS_LISTED: Accept Wi-Fi connections which match |
| 1788 |
* the specific configuration (IE) set, i.e., deny all the |
| 1789 |
* connections which do not match the configuration. |
| 1790 |
*/ |
| 1791 |
enum qca_access_policy { |
| 1792 |
QCA_ACCESS_POLICY_ACCEPT_UNLESS_LISTED, |
| 1793 |
QCA_ACCESS_POLICY_DENY_UNLESS_LISTED, |
| 1794 |
}; |
| 1795 |
|
| 1796 |
/** |
| 1797 |
* enum qca_vendor_attr_tsf_cmd: Vendor attributes for TSF capture |
| 1798 |
* @QCA_WLAN_VENDOR_ATTR_TSF_CMD: Required (u32) |
| 1799 |
* Specify the TSF command. Possible values are defined in |
| 1800 |
* &enum qca_tsf_cmd. |
| 1801 |
* @QCA_WLAN_VENDOR_ATTR_TSF_TIMER_VALUE: Optional (u64) |
| 1802 |
* This attribute contains TSF timer value. This attribute is only available |
| 1803 |
* in %QCA_TSF_GET or %QCA_TSF_SYNC_GET response. |
| 1804 |
* @QCA_WLAN_VENDOR_ATTR_TSF_SOC_TIMER_VALUE: Optional (u64) |
| 1805 |
* This attribute contains SOC timer value at TSF capture. This attribute is |
| 1806 |
* only available in %QCA_TSF_GET or %QCA_TSF_SYNC_GET response. |
| 1807 |
* @QCA_WLAN_VENDOR_ATTR_TSF_SYNC_INTERVAL: Optional (u32) |
| 1808 |
* This attribute is used to provide TSF sync interval and only applicable when |
| 1809 |
* TSF command is %QCA_TSF_SYNC_START. If this attribute is not provided, the |
| 1810 |
* driver will use the default value. Time unit is in milliseconds. |
| 1811 |
*/ |
| 1812 |
enum qca_vendor_attr_tsf_cmd { |
| 1813 |
QCA_WLAN_VENDOR_ATTR_TSF_INVALID = 0, |
| 1814 |
QCA_WLAN_VENDOR_ATTR_TSF_CMD, |
| 1815 |
QCA_WLAN_VENDOR_ATTR_TSF_TIMER_VALUE, |
| 1816 |
QCA_WLAN_VENDOR_ATTR_TSF_SOC_TIMER_VALUE, |
| 1817 |
QCA_WLAN_VENDOR_ATTR_TSF_SYNC_INTERVAL, |
| 1818 |
QCA_WLAN_VENDOR_ATTR_TSF_AFTER_LAST, |
| 1819 |
QCA_WLAN_VENDOR_ATTR_TSF_MAX = |
| 1820 |
QCA_WLAN_VENDOR_ATTR_TSF_AFTER_LAST - 1 |
| 1821 |
}; |
| 1822 |
|
| 1823 |
/** |
| 1824 |
* enum qca_tsf_cmd: TSF driver commands |
| 1825 |
* @QCA_TSF_CAPTURE: Initiate TSF Capture |
| 1826 |
* @QCA_TSF_GET: Get TSF capture value |
| 1827 |
* @QCA_TSF_SYNC_GET: Initiate TSF capture and return with captured value |
| 1828 |
* @QCA_TSF_AUTO_REPORT_ENABLE: Used in STA mode only. Once set, the target |
| 1829 |
* will automatically send TSF report to the host. To query |
| 1830 |
* %QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_UPLINK_DELAY, this operation needs to be |
| 1831 |
* initiated first. |
| 1832 |
* @QCA_TSF_AUTO_REPORT_DISABLE: Used in STA mode only. Once set, the target |
| 1833 |
* will not automatically send TSF report to the host. If |
| 1834 |
* %QCA_TSF_AUTO_REPORT_ENABLE is initiated and |
| 1835 |
* %QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_UPLINK_DELAY is not queried anymore, this |
| 1836 |
* operation needs to be initiated. |
| 1837 |
* @QCA_TSF_SYNC_START: Start periodic TSF sync feature. The driver periodically |
| 1838 |
* fetches TSF and host time mapping from the firmware with interval configured |
| 1839 |
* through the %QCA_WLAN_VENDOR_ATTR_TSF_SYNC_INTERVAL attribute. If the |
| 1840 |
* interval value is not provided the driver will use the default value. The |
| 1841 |
* userspace can query the TSF and host time mapping via the %QCA_TSF_GET |
| 1842 |
* command. |
| 1843 |
* @QCA_TSF_SYNC_STOP: Stop periodic TSF sync feature. |
| 1844 |
*/ |
| 1845 |
enum qca_tsf_cmd { |
| 1846 |
QCA_TSF_CAPTURE, |
| 1847 |
QCA_TSF_GET, |
| 1848 |
QCA_TSF_SYNC_GET, |
| 1849 |
QCA_TSF_AUTO_REPORT_ENABLE, |
| 1850 |
QCA_TSF_AUTO_REPORT_DISABLE, |
| 1851 |
QCA_TSF_SYNC_START, |
| 1852 |
QCA_TSF_SYNC_STOP, |
| 1853 |
}; |
| 1854 |
|
| 1855 |
/** |
| 1856 |
* enum qca_vendor_attr_wisa_cmd |
| 1857 |
* @QCA_WLAN_VENDOR_ATTR_WISA_MODE: WISA mode value (u32) |
| 1858 |
* WISA setup vendor commands |
| 1859 |
*/ |
| 1860 |
enum qca_vendor_attr_wisa_cmd { |
| 1861 |
QCA_WLAN_VENDOR_ATTR_WISA_INVALID = 0, |
| 1862 |
QCA_WLAN_VENDOR_ATTR_WISA_MODE, |
| 1863 |
QCA_WLAN_VENDOR_ATTR_WISA_AFTER_LAST, |
| 1864 |
QCA_WLAN_VENDOR_ATTR_WISA_MAX = |
| 1865 |
QCA_WLAN_VENDOR_ATTR_WISA_AFTER_LAST - 1 |
| 1866 |
}; |
| 1867 |
|
| 1868 |
/* IEEE 802.11 Vendor Specific elements */ |
| 1869 |
|
| 1870 |
/** |
| 1871 |
* enum qca_vendor_element_id - QCA Vendor Specific element types |
| 1872 |
* |
| 1873 |
* These values are used to identify QCA Vendor Specific elements. The |
| 1874 |
* payload of the element starts with the three octet OUI (OUI_QCA) and |
| 1875 |
* is followed by a single octet type which is defined by this enum. |
| 1876 |
* |
| 1877 |
* @QCA_VENDOR_ELEM_P2P_PREF_CHAN_LIST: P2P preferred channel list. |
| 1878 |
* This element can be used to specify preference order for supported |
| 1879 |
* channels. The channels in this list are in preference order (the first |
| 1880 |
* one has the highest preference) and are described as a pair of |
| 1881 |
* (global) Operating Class and Channel Number (each one octet) fields. |
| 1882 |
* |
| 1883 |
* This extends the standard P2P functionality by providing option to have |
| 1884 |
* more than one preferred operating channel. When this element is present, |
| 1885 |
* it replaces the preference indicated in the Operating Channel attribute. |
| 1886 |
* For supporting other implementations, the Operating Channel attribute is |
| 1887 |
* expected to be used with the highest preference channel. Similarly, all |
| 1888 |
* the channels included in this Preferred channel list element are |
| 1889 |
* expected to be included in the Channel List attribute. |
| 1890 |
* |
| 1891 |
* This vendor element may be included in GO Negotiation Request, P2P |
| 1892 |
* Invitation Request, and Provision Discovery Request frames. |
| 1893 |
* |
| 1894 |
* @QCA_VENDOR_ELEM_HE_CAPAB: HE Capabilities element. |
| 1895 |
* This element can be used for pre-standard publication testing of HE |
| 1896 |
* before P802.11ax draft assigns the element ID. The payload of this |
| 1897 |
* vendor specific element is defined by the latest P802.11ax draft. |
| 1898 |
* Please note that the draft is still work in progress and this element |
| 1899 |
* payload is subject to change. |
| 1900 |
* |
| 1901 |
* @QCA_VENDOR_ELEM_HE_OPER: HE Operation element. |
| 1902 |
* This element can be used for pre-standard publication testing of HE |
| 1903 |
* before P802.11ax draft assigns the element ID. The payload of this |
| 1904 |
* vendor specific element is defined by the latest P802.11ax draft. |
| 1905 |
* Please note that the draft is still work in progress and this element |
| 1906 |
* payload is subject to change. |
| 1907 |
* |
| 1908 |
* @QCA_VENDOR_ELEM_RAPS: RAPS element (OFDMA-based Random Access Parameter Set |
| 1909 |
* element). |
| 1910 |
* This element can be used for pre-standard publication testing of HE |
| 1911 |
* before P802.11ax draft assigns the element ID extension. The payload of |
| 1912 |
* this vendor specific element is defined by the latest P802.11ax draft |
| 1913 |
* (not including the Element ID Extension field). Please note that the |
| 1914 |
* draft is still work in progress and this element payload is subject to |
| 1915 |
* change. |
| 1916 |
* |
| 1917 |
* @QCA_VENDOR_ELEM_MU_EDCA_PARAMS: MU EDCA Parameter Set element. |
| 1918 |
* This element can be used for pre-standard publication testing of HE |
| 1919 |
* before P802.11ax draft assigns the element ID extension. The payload of |
| 1920 |
* this vendor specific element is defined by the latest P802.11ax draft |
| 1921 |
* (not including the Element ID Extension field). Please note that the |
| 1922 |
* draft is still work in progress and this element payload is subject to |
| 1923 |
* change. |
| 1924 |
* |
| 1925 |
* @QCA_VENDOR_ELEM_BSS_COLOR_CHANGE: BSS Color Change Announcement element. |
| 1926 |
* This element can be used for pre-standard publication testing of HE |
| 1927 |
* before P802.11ax draft assigns the element ID extension. The payload of |
| 1928 |
* this vendor specific element is defined by the latest P802.11ax draft |
| 1929 |
* (not including the Element ID Extension field). Please note that the |
| 1930 |
* draft is still work in progress and this element payload is subject to |
| 1931 |
* change. |
| 1932 |
* |
| 1933 |
* @QCA_VENDOR_ELEM_ALLPLAY: Allplay element |
| 1934 |
*/ |
| 1935 |
enum qca_vendor_element_id { |
| 1936 |
QCA_VENDOR_ELEM_P2P_PREF_CHAN_LIST = 0, |
| 1937 |
QCA_VENDOR_ELEM_HE_CAPAB = 1, |
| 1938 |
QCA_VENDOR_ELEM_HE_OPER = 2, |
| 1939 |
QCA_VENDOR_ELEM_RAPS = 3, |
| 1940 |
QCA_VENDOR_ELEM_MU_EDCA_PARAMS = 4, |
| 1941 |
QCA_VENDOR_ELEM_BSS_COLOR_CHANGE = 5, |
| 1942 |
QCA_VENDOR_ELEM_ALLPLAY = 6, |
| 1943 |
}; |
| 1944 |
|
| 1945 |
/** |
| 1946 |
* enum qca_wlan_vendor_scan_priority - Specifies the valid values that the |
| 1947 |
* vendor scan attribute QCA_WLAN_VENDOR_ATTR_SCAN_PRIORITY can take. |
| 1948 |
* @QCA_WLAN_VENDOR_SCAN_PRIORITY_VERY_LOW: Very low priority |
| 1949 |
* @QCA_WLAN_VENDOR_SCAN_PRIORITY_LOW: Low priority |
| 1950 |
* @QCA_WLAN_VENDOR_SCAN_PRIORITY_MEDIUM: Medium priority |
| 1951 |
* @QCA_WLAN_VENDOR_SCAN_PRIORITY_HIGH: High priority |
| 1952 |
* @QCA_WLAN_VENDOR_SCAN_PRIORITY_VERY_HIGH: Very high priority |
| 1953 |
*/ |
| 1954 |
enum qca_wlan_vendor_scan_priority { |
| 1955 |
QCA_WLAN_VENDOR_SCAN_PRIORITY_VERY_LOW = 0, |
| 1956 |
QCA_WLAN_VENDOR_SCAN_PRIORITY_LOW = 1, |
| 1957 |
QCA_WLAN_VENDOR_SCAN_PRIORITY_MEDIUM = 2, |
| 1958 |
QCA_WLAN_VENDOR_SCAN_PRIORITY_HIGH = 3, |
| 1959 |
QCA_WLAN_VENDOR_SCAN_PRIORITY_VERY_HIGH = 4, |
| 1960 |
}; |
| 1961 |
|
| 1962 |
/** |
| 1963 |
* enum qca_wlan_vendor_attr_scan - Specifies vendor scan attributes |
| 1964 |
* |
| 1965 |
* @QCA_WLAN_VENDOR_ATTR_SCAN_IE: IEs that should be included as part of scan |
| 1966 |
* @QCA_WLAN_VENDOR_ATTR_SCAN_FREQUENCIES: Nested unsigned 32-bit attributes |
| 1967 |
* with frequencies to be scanned (in MHz) |
| 1968 |
* @QCA_WLAN_VENDOR_ATTR_SCAN_SSIDS: Nested attribute with SSIDs to be scanned |
| 1969 |
* @QCA_WLAN_VENDOR_ATTR_SCAN_SUPP_RATES: Nested array attribute of supported |
| 1970 |
* rates to be included |
| 1971 |
* @QCA_WLAN_VENDOR_ATTR_SCAN_TX_NO_CCK_RATE: flag used to send probe requests |
| 1972 |
* at non CCK rate in 2GHz band |
| 1973 |
* @QCA_WLAN_VENDOR_ATTR_SCAN_FLAGS: Unsigned 32-bit scan flags |
| 1974 |
* @QCA_WLAN_VENDOR_ATTR_SCAN_COOKIE: Unsigned 64-bit cookie provided by the |
| 1975 |
* driver for the specific scan request |
| 1976 |
* @QCA_WLAN_VENDOR_ATTR_SCAN_STATUS: Unsigned 8-bit status of the scan |
| 1977 |
* request decoded as in enum scan_status |
| 1978 |
* @QCA_WLAN_VENDOR_ATTR_SCAN_MAC: 6-byte MAC address to use when randomisation |
| 1979 |
* scan flag is set |
| 1980 |
* @QCA_WLAN_VENDOR_ATTR_SCAN_MAC_MASK: 6-byte MAC address mask to be used with |
| 1981 |
* randomisation |
| 1982 |
* @QCA_WLAN_VENDOR_ATTR_SCAN_BSSID: 6-byte MAC address representing the |
| 1983 |
* specific BSSID to scan for. |
| 1984 |
* @QCA_WLAN_VENDOR_ATTR_SCAN_DWELL_TIME: Unsigned 64-bit dwell time in |
| 1985 |
* microseconds. This is a common value which applies across all |
| 1986 |
* frequencies specified by QCA_WLAN_VENDOR_ATTR_SCAN_FREQUENCIES. |
| 1987 |
* @QCA_WLAN_VENDOR_ATTR_SCAN_PRIORITY: Priority of vendor scan relative to |
| 1988 |
* other scan requests. It is a u32 attribute and takes values from enum |
| 1989 |
* qca_wlan_vendor_scan_priority. This is an optional attribute. |
| 1990 |
* If this attribute is not configured, the driver shall use |
| 1991 |
* QCA_WLAN_VENDOR_SCAN_PRIORITY_HIGH as the priority of vendor scan. |
| 1992 |
*/ |
| 1993 |
enum qca_wlan_vendor_attr_scan { |
| 1994 |
QCA_WLAN_VENDOR_ATTR_SCAN_INVALID_PARAM = 0, |
| 1995 |
QCA_WLAN_VENDOR_ATTR_SCAN_IE = 1, |
| 1996 |
QCA_WLAN_VENDOR_ATTR_SCAN_FREQUENCIES = 2, |
| 1997 |
QCA_WLAN_VENDOR_ATTR_SCAN_SSIDS = 3, |
| 1998 |
QCA_WLAN_VENDOR_ATTR_SCAN_SUPP_RATES = 4, |
| 1999 |
QCA_WLAN_VENDOR_ATTR_SCAN_TX_NO_CCK_RATE = 5, |
| 2000 |
QCA_WLAN_VENDOR_ATTR_SCAN_FLAGS = 6, |
| 2001 |
QCA_WLAN_VENDOR_ATTR_SCAN_COOKIE = 7, |
| 2002 |
QCA_WLAN_VENDOR_ATTR_SCAN_STATUS = 8, |
| 2003 |
QCA_WLAN_VENDOR_ATTR_SCAN_MAC = 9, |
| 2004 |
QCA_WLAN_VENDOR_ATTR_SCAN_MAC_MASK = 10, |
| 2005 |
QCA_WLAN_VENDOR_ATTR_SCAN_BSSID = 11, |
| 2006 |
QCA_WLAN_VENDOR_ATTR_SCAN_DWELL_TIME = 12, |
| 2007 |
QCA_WLAN_VENDOR_ATTR_SCAN_PRIORITY = 13, |
| 2008 |
QCA_WLAN_VENDOR_ATTR_SCAN_AFTER_LAST, |
| 2009 |
QCA_WLAN_VENDOR_ATTR_SCAN_MAX = |
| 2010 |
QCA_WLAN_VENDOR_ATTR_SCAN_AFTER_LAST - 1 |
| 2011 |
}; |
| 2012 |
|
| 2013 |
/** |
| 2014 |
* enum scan_status - Specifies the valid values the vendor scan attribute |
| 2015 |
* QCA_WLAN_VENDOR_ATTR_SCAN_STATUS can take |
| 2016 |
* |
| 2017 |
* @VENDOR_SCAN_STATUS_NEW_RESULTS: implies the vendor scan is successful with |
| 2018 |
* new scan results |
| 2019 |
* @VENDOR_SCAN_STATUS_ABORTED: implies the vendor scan was aborted in-between |
| 2020 |
*/ |
| 2021 |
enum scan_status { |
| 2022 |
VENDOR_SCAN_STATUS_NEW_RESULTS, |
| 2023 |
VENDOR_SCAN_STATUS_ABORTED, |
| 2024 |
VENDOR_SCAN_STATUS_MAX, |
| 2025 |
}; |
| 2026 |
|
| 2027 |
/** |
| 2028 |
* enum qca_vendor_attr_ota_test - Specifies the values for vendor |
| 2029 |
* command QCA_NL80211_VENDOR_SUBCMD_OTA_TEST |
| 2030 |
* @QCA_WLAN_VENDOR_ATTR_OTA_TEST_ENABLE: enable ota test |
| 2031 |
*/ |
| 2032 |
enum qca_vendor_attr_ota_test { |
| 2033 |
QCA_WLAN_VENDOR_ATTR_OTA_TEST_INVALID, |
| 2034 |
/* 8-bit unsigned value to indicate if OTA test is enabled */ |
| 2035 |
QCA_WLAN_VENDOR_ATTR_OTA_TEST_ENABLE, |
| 2036 |
/* keep last */ |
| 2037 |
QCA_WLAN_VENDOR_ATTR_OTA_TEST_AFTER_LAST, |
| 2038 |
QCA_WLAN_VENDOR_ATTR_OTA_TEST_MAX = |
| 2039 |
QCA_WLAN_VENDOR_ATTR_OTA_TEST_AFTER_LAST - 1 |
| 2040 |
}; |
| 2041 |
|
| 2042 |
/** |
| 2043 |
* enum qca_vendor_attr_txpower_scale - vendor sub commands index |
| 2044 |
* |
| 2045 |
* @QCA_WLAN_VENDOR_ATTR_TXPOWER_SCALE: scaling value |
| 2046 |
*/ |
| 2047 |
enum qca_vendor_attr_txpower_scale { |
| 2048 |
QCA_WLAN_VENDOR_ATTR_TXPOWER_SCALE_INVALID, |
| 2049 |
/* 8-bit unsigned value to indicate the scaling of tx power */ |
| 2050 |
QCA_WLAN_VENDOR_ATTR_TXPOWER_SCALE, |
| 2051 |
/* keep last */ |
| 2052 |
QCA_WLAN_VENDOR_ATTR_TXPOWER_SCALE_AFTER_LAST, |
| 2053 |
QCA_WLAN_VENDOR_ATTR_TXPOWER_SCALE_MAX = |
| 2054 |
QCA_WLAN_VENDOR_ATTR_TXPOWER_SCALE_AFTER_LAST - 1 |
| 2055 |
}; |
| 2056 |
|
| 2057 |
/** |
| 2058 |
* enum qca_vendor_attr_txpower_decr_db - Attributes for TX power decrease |
| 2059 |
* |
| 2060 |
* These attributes are used with QCA_NL80211_VENDOR_SUBCMD_SET_TXPOWER_DECR_DB. |
| 2061 |
*/ |
| 2062 |
enum qca_vendor_attr_txpower_decr_db { |
| 2063 |
QCA_WLAN_VENDOR_ATTR_TXPOWER_DECR_DB_INVALID, |
| 2064 |
/* 8-bit unsigned value to indicate the reduction of TX power in dB for |
| 2065 |
* a virtual interface. |
| 2066 |
*/ |
| 2067 |
QCA_WLAN_VENDOR_ATTR_TXPOWER_DECR_DB, |
| 2068 |
/* keep last */ |
| 2069 |
QCA_WLAN_VENDOR_ATTR_TXPOWER_DECR_DB_AFTER_LAST, |
| 2070 |
QCA_WLAN_VENDOR_ATTR_TXPOWER_DECR_DB_MAX = |
| 2071 |
QCA_WLAN_VENDOR_ATTR_TXPOWER_DECR_DB_AFTER_LAST - 1 |
| 2072 |
}; |
| 2073 |
|
| 2074 |
/* Attributes for data used by |
| 2075 |
* QCA_NL80211_VENDOR_SUBCMD_SET_WIFI_CONFIGURATION and |
| 2076 |
* QCA_NL80211_VENDOR_SUBCMD_GET_WIFI_CONFIGURATION subcommands. |
| 2077 |
*/ |
| 2078 |
enum qca_wlan_vendor_attr_config { |
| 2079 |
QCA_WLAN_VENDOR_ATTR_CONFIG_INVALID = 0, |
| 2080 |
/* Unsigned 32-bit value to set the DTIM period. |
| 2081 |
* Whether the wifi chipset wakes at every dtim beacon or a multiple of |
| 2082 |
* the DTIM period. If DTIM is set to 3, the STA shall wake up every 3 |
| 2083 |
* DTIM beacons. |
| 2084 |
*/ |
| 2085 |
QCA_WLAN_VENDOR_ATTR_CONFIG_DYNAMIC_DTIM = 1, |
| 2086 |
/* Unsigned 32-bit value to set the wifi_iface stats averaging factor |
| 2087 |
* used to calculate statistics like average the TSF offset or average |
| 2088 |
* number of frame leaked. |
| 2089 |
* For instance, upon Beacon frame reception: |
| 2090 |
* current_avg = ((beacon_TSF - TBTT) * factor + previous_avg * (0x10000 - factor) ) / 0x10000 |
| 2091 |
* For instance, when evaluating leaky APs: |
| 2092 |
* current_avg = ((num frame received within guard time) * factor + previous_avg * (0x10000 - factor)) / 0x10000 |
| 2093 |
*/ |
| 2094 |
QCA_WLAN_VENDOR_ATTR_CONFIG_STATS_AVG_FACTOR = 2, |
| 2095 |
/* Unsigned 32-bit value to configure guard time, i.e., when |
| 2096 |
* implementing IEEE power management based on frame control PM bit, how |
| 2097 |
* long the driver waits before shutting down the radio and after |
| 2098 |
* receiving an ACK frame for a Data frame with PM bit set. |
| 2099 |
*/ |
| 2100 |
QCA_WLAN_VENDOR_ATTR_CONFIG_GUARD_TIME = 3, |
| 2101 |
/* Unsigned 32-bit value to change the FTM capability dynamically */ |
| 2102 |
QCA_WLAN_VENDOR_ATTR_CONFIG_FINE_TIME_MEASUREMENT = 4, |
| 2103 |
/* Unsigned 16-bit value to configure maximum TX rate dynamically */ |
| 2104 |
QCA_WLAN_VENDOR_ATTR_CONF_TX_RATE = 5, |
| 2105 |
/* Unsigned 32-bit value to configure the number of continuous |
| 2106 |
* Beacon Miss which shall be used by the firmware to penalize |
| 2107 |
* the RSSI. |
| 2108 |
*/ |
| 2109 |
QCA_WLAN_VENDOR_ATTR_CONFIG_PENALIZE_AFTER_NCONS_BEACON_MISS = 6, |
| 2110 |
/* Unsigned 8-bit value to configure the channel avoidance indication |
| 2111 |
* behavior. Firmware to send only one indication and ignore duplicate |
| 2112 |
* indications when set to avoid multiple Apps wakeups. |
| 2113 |
*/ |
| 2114 |
QCA_WLAN_VENDOR_ATTR_CONFIG_CHANNEL_AVOIDANCE_IND = 7, |
| 2115 |
/* 8-bit unsigned value to configure the maximum TX MPDU for |
| 2116 |
* aggregation. |
| 2117 |
*/ |
| 2118 |
QCA_WLAN_VENDOR_ATTR_CONFIG_TX_MPDU_AGGREGATION = 8, |
| 2119 |
/* 8-bit unsigned value to configure the maximum RX MPDU for |
| 2120 |
* aggregation. |
| 2121 |
*/ |
| 2122 |
QCA_WLAN_VENDOR_ATTR_CONFIG_RX_MPDU_AGGREGATION = 9, |
| 2123 |
/* 8-bit unsigned value to configure the Non aggregrate/11g sw |
| 2124 |
* retry threshold (0 disable, 31 max). |
| 2125 |
*/ |
| 2126 |
QCA_WLAN_VENDOR_ATTR_CONFIG_NON_AGG_RETRY = 10, |
| 2127 |
/* 8-bit unsigned value to configure the aggregrate sw |
| 2128 |
* retry threshold (0 disable, 31 max). |
| 2129 |
*/ |
| 2130 |
QCA_WLAN_VENDOR_ATTR_CONFIG_AGG_RETRY = 11, |
| 2131 |
/* 8-bit unsigned value to configure the MGMT frame |
| 2132 |
* retry threshold (0 disable, 31 max). |
| 2133 |
*/ |
| 2134 |
QCA_WLAN_VENDOR_ATTR_CONFIG_MGMT_RETRY = 12, |
| 2135 |
/* 8-bit unsigned value to configure the CTRL frame |
| 2136 |
* retry threshold (0 disable, 31 max). |
| 2137 |
*/ |
| 2138 |
QCA_WLAN_VENDOR_ATTR_CONFIG_CTRL_RETRY = 13, |
| 2139 |
/* 8-bit unsigned value to configure the propagation delay for |
| 2140 |
* 2G/5G band (0~63, units in us) |
| 2141 |
*/ |
| 2142 |
QCA_WLAN_VENDOR_ATTR_CONFIG_PROPAGATION_DELAY = 14, |
| 2143 |
/* Unsigned 32-bit value to configure the number of unicast TX fail |
| 2144 |
* packet count. The peer is disconnected once this threshold is |
| 2145 |
* reached. |
| 2146 |
*/ |
| 2147 |
QCA_WLAN_VENDOR_ATTR_CONFIG_TX_FAIL_COUNT = 15, |
| 2148 |
/* Attribute used to set scan default IEs to the driver. |
| 2149 |
* |
| 2150 |
* These IEs can be used by scan operations that will be initiated by |
| 2151 |
* the driver/firmware. |
| 2152 |
* |
| 2153 |
* For further scan requests coming to the driver, these IEs should be |
| 2154 |
* merged with the IEs received along with scan request coming to the |
| 2155 |
* driver. If a particular IE is present in the scan default IEs but not |
| 2156 |
* present in the scan request, then that IE should be added to the IEs |
| 2157 |
* sent in the Probe Request frames for that scan request. |
| 2158 |
*/ |
| 2159 |
QCA_WLAN_VENDOR_ATTR_CONFIG_SCAN_DEFAULT_IES = 16, |
| 2160 |
/* Unsigned 32-bit attribute for generic commands */ |
| 2161 |
QCA_WLAN_VENDOR_ATTR_CONFIG_GENERIC_COMMAND = 17, |
| 2162 |
/* Unsigned 32-bit value attribute for generic commands */ |
| 2163 |
QCA_WLAN_VENDOR_ATTR_CONFIG_GENERIC_VALUE = 18, |
| 2164 |
/* Unsigned 32-bit data attribute for generic command response */ |
| 2165 |
QCA_WLAN_VENDOR_ATTR_CONFIG_GENERIC_DATA = 19, |
| 2166 |
/* Unsigned 32-bit length attribute for |
| 2167 |
* QCA_WLAN_VENDOR_ATTR_CONFIG_GENERIC_DATA |
| 2168 |
*/ |
| 2169 |
QCA_WLAN_VENDOR_ATTR_CONFIG_GENERIC_LENGTH = 20, |
| 2170 |
/* Unsigned 32-bit flags attribute for |
| 2171 |
* QCA_WLAN_VENDOR_ATTR_CONFIG_GENERIC_DATA |
| 2172 |
*/ |
| 2173 |
QCA_WLAN_VENDOR_ATTR_CONFIG_GENERIC_FLAGS = 21, |
| 2174 |
/* Unsigned 32-bit, defining the access policy. |
| 2175 |
* See enum qca_access_policy. Used with |
| 2176 |
* QCA_WLAN_VENDOR_ATTR_CONFIG_ACCESS_POLICY_IE_LIST. |
| 2177 |
*/ |
| 2178 |
QCA_WLAN_VENDOR_ATTR_CONFIG_ACCESS_POLICY = 22, |
| 2179 |
/* Sets the list of full set of IEs for which a specific access policy |
| 2180 |
* has to be applied. Used along with |
| 2181 |
* QCA_WLAN_VENDOR_ATTR_CONFIG_ACCESS_POLICY to control the access. |
| 2182 |
* Zero length payload can be used to clear this access constraint. |
| 2183 |
*/ |
| 2184 |
QCA_WLAN_VENDOR_ATTR_CONFIG_ACCESS_POLICY_IE_LIST = 23, |
| 2185 |
/* Unsigned 32-bit, specifies the interface index (netdev) for which the |
| 2186 |
* corresponding configurations are applied. If the interface index is |
| 2187 |
* not specified, the configurations are attributed to the respective |
| 2188 |
* wiphy. |
| 2189 |
*/ |
| 2190 |
QCA_WLAN_VENDOR_ATTR_CONFIG_IFINDEX = 24, |
| 2191 |
/* 8-bit unsigned value to trigger QPower: 1-Enable, 0-Disable */ |
| 2192 |
QCA_WLAN_VENDOR_ATTR_CONFIG_QPOWER = 25, |
| 2193 |
/* 8-bit unsigned value to configure the driver and below layers to |
| 2194 |
* ignore the assoc disallowed set by APs while connecting |
| 2195 |
* 1-Ignore, 0-Don't ignore |
| 2196 |
*/ |
| 2197 |
QCA_WLAN_VENDOR_ATTR_CONFIG_IGNORE_ASSOC_DISALLOWED = 26, |
| 2198 |
/* 32-bit unsigned value to trigger antenna diversity features: |
| 2199 |
* 1-Enable, 0-Disable |
| 2200 |
*/ |
| 2201 |
QCA_WLAN_VENDOR_ATTR_CONFIG_ANT_DIV_ENA = 27, |
| 2202 |
/* 32-bit unsigned value to configure specific chain antenna */ |
| 2203 |
QCA_WLAN_VENDOR_ATTR_CONFIG_ANT_DIV_CHAIN = 28, |
| 2204 |
/* 32-bit unsigned value to trigger cycle selftest |
| 2205 |
* 1-Enable, 0-Disable |
| 2206 |
*/ |
| 2207 |
QCA_WLAN_VENDOR_ATTR_CONFIG_ANT_DIV_SELFTEST = 29, |
| 2208 |
/* 32-bit unsigned to configure the cycle time of selftest |
| 2209 |
* the unit is micro-second |
| 2210 |
*/ |
| 2211 |
QCA_WLAN_VENDOR_ATTR_CONFIG_ANT_DIV_SELFTEST_INTVL = 30, |
| 2212 |
/* 32-bit unsigned value to set reorder timeout for AC_VO */ |
| 2213 |
QCA_WLAN_VENDOR_ATTR_CONFIG_RX_REORDER_TIMEOUT_VOICE = 31, |
| 2214 |
/* 32-bit unsigned value to set reorder timeout for AC_VI */ |
| 2215 |
QCA_WLAN_VENDOR_ATTR_CONFIG_RX_REORDER_TIMEOUT_VIDEO = 32, |
| 2216 |
/* 32-bit unsigned value to set reorder timeout for AC_BE */ |
| 2217 |
QCA_WLAN_VENDOR_ATTR_CONFIG_RX_REORDER_TIMEOUT_BESTEFFORT = 33, |
| 2218 |
/* 32-bit unsigned value to set reorder timeout for AC_BK */ |
| 2219 |
QCA_WLAN_VENDOR_ATTR_CONFIG_RX_REORDER_TIMEOUT_BACKGROUND = 34, |
| 2220 |
/* 6-byte MAC address to point out the specific peer */ |
| 2221 |
QCA_WLAN_VENDOR_ATTR_CONFIG_RX_BLOCKSIZE_PEER_MAC = 35, |
| 2222 |
/* 32-bit unsigned value to set window size for specific peer */ |
| 2223 |
QCA_WLAN_VENDOR_ATTR_CONFIG_RX_BLOCKSIZE_WINLIMIT = 36, |
| 2224 |
/* 8-bit unsigned value to set the beacon miss threshold in 2.4 GHz */ |
| 2225 |
QCA_WLAN_VENDOR_ATTR_CONFIG_BEACON_MISS_THRESHOLD_24 = 37, |
| 2226 |
/* 8-bit unsigned value to set the beacon miss threshold in 5 GHz */ |
| 2227 |
QCA_WLAN_VENDOR_ATTR_CONFIG_BEACON_MISS_THRESHOLD_5 = 38, |
| 2228 |
/* 32-bit unsigned value to configure 5 or 10 MHz channel width for |
| 2229 |
* station device while in disconnect state. The attribute use the |
| 2230 |
* value of enum nl80211_chan_width: NL80211_CHAN_WIDTH_5 means 5 MHz, |
| 2231 |
* NL80211_CHAN_WIDTH_10 means 10 MHz. If set, the device work in 5 or |
| 2232 |
* 10 MHz channel width, the station will not connect to a BSS using 20 |
| 2233 |
* MHz or higher bandwidth. Set to NL80211_CHAN_WIDTH_20_NOHT to |
| 2234 |
* clear this constraint. |
| 2235 |
*/ |
| 2236 |
QCA_WLAN_VENDOR_ATTR_CONFIG_SUB20_CHAN_WIDTH = 39, |
| 2237 |
/* 32-bit unsigned value to configure the propagation absolute delay |
| 2238 |
* for 2G/5G band (units in us) |
| 2239 |
*/ |
| 2240 |
QCA_WLAN_VENDOR_ATTR_CONFIG_PROPAGATION_ABS_DELAY = 40, |
| 2241 |
/* 32-bit unsigned value to set probe period */ |
| 2242 |
QCA_WLAN_VENDOR_ATTR_CONFIG_ANT_DIV_PROBE_PERIOD = 41, |
| 2243 |
/* 32-bit unsigned value to set stay period */ |
| 2244 |
QCA_WLAN_VENDOR_ATTR_CONFIG_ANT_DIV_STAY_PERIOD = 42, |
| 2245 |
/* 32-bit unsigned value to set snr diff */ |
| 2246 |
QCA_WLAN_VENDOR_ATTR_CONFIG_ANT_DIV_SNR_DIFF = 43, |
| 2247 |
/* 32-bit unsigned value to set probe dwell time */ |
| 2248 |
QCA_WLAN_VENDOR_ATTR_CONFIG_ANT_DIV_PROBE_DWELL_TIME = 44, |
| 2249 |
/* 32-bit unsigned value to set mgmt snr weight */ |
| 2250 |
QCA_WLAN_VENDOR_ATTR_CONFIG_ANT_DIV_MGMT_SNR_WEIGHT = 45, |
| 2251 |
/* 32-bit unsigned value to set data snr weight */ |
| 2252 |
QCA_WLAN_VENDOR_ATTR_CONFIG_ANT_DIV_DATA_SNR_WEIGHT = 46, |
| 2253 |
/* 32-bit unsigned value to set ack snr weight */ |
| 2254 |
QCA_WLAN_VENDOR_ATTR_CONFIG_ANT_DIV_ACK_SNR_WEIGHT = 47, |
| 2255 |
/* 32-bit unsigned value to configure the listen interval. |
| 2256 |
* This is in units of beacon intervals. This configuration alters |
| 2257 |
* the negotiated listen interval with the AP during the connection. |
| 2258 |
* It is highly recommended to configure a value less than or equal to |
| 2259 |
* the one negotiated during the association. Configuring any greater |
| 2260 |
* value can have adverse effects (frame loss, AP disassociating STA, |
| 2261 |
* etc.). |
| 2262 |
*/ |
| 2263 |
QCA_WLAN_VENDOR_ATTR_CONFIG_LISTEN_INTERVAL = 48, |
| 2264 |
/* |
| 2265 |
* 8 bit unsigned value that is set on an AP/GO virtual interface to |
| 2266 |
* disable operations that would cause the AP/GO to leave its operating |
| 2267 |
* channel. |
| 2268 |
* |
| 2269 |
* This will restrict the scans to the AP/GO operating channel and the |
| 2270 |
* channels of the other band, if DBS is supported.A STA/CLI interface |
| 2271 |
* brought up after this setting is enabled, will be restricted to |
| 2272 |
* connecting to devices only on the AP/GO interface's operating channel |
| 2273 |
* or on the other band in DBS case. P2P supported channel list is |
| 2274 |
* modified, to only include AP interface's operating-channel and the |
| 2275 |
* channels of the other band if DBS is supported. |
| 2276 |
* |
| 2277 |
* These restrictions are only applicable as long as the AP/GO interface |
| 2278 |
* is alive. If the AP/GO interface is brought down then this |
| 2279 |
* setting/restriction is forgotten. |
| 2280 |
* |
| 2281 |
* If this variable is set on an AP/GO interface while a multi-channel |
| 2282 |
* concurrent session is active, it has no effect on the operation of |
| 2283 |
* the current interfaces, other than restricting the scan to the AP/GO |
| 2284 |
* operating channel and the other band channels if DBS is supported. |
| 2285 |
* However, if the STA is brought down and restarted then the new STA |
| 2286 |
* connection will either be formed on the AP/GO channel or on the |
| 2287 |
* other band in a DBS case. This is because of the scan being |
| 2288 |
* restricted on these channels as mentioned above. |
| 2289 |
* |
| 2290 |
* 1-Restrict / 0-Don't restrict offchannel operations. |
| 2291 |
*/ |
| 2292 |
QCA_WLAN_VENDOR_ATTR_CONFIG_RESTRICT_OFFCHANNEL = 49, |
| 2293 |
/* |
| 2294 |
* 8 bit unsigned value to enable/disable LRO (Large Receive Offload) |
| 2295 |
* on an interface. |
| 2296 |
* 1 - Enable, 0 - Disable. |
| 2297 |
*/ |
| 2298 |
QCA_WLAN_VENDOR_ATTR_CONFIG_LRO = 50, |
| 2299 |
|
| 2300 |
/* |
| 2301 |
* 8 bit unsigned value to globally enable/disable scan |
| 2302 |
* 1 - Enable, 0 - Disable. |
| 2303 |
*/ |
| 2304 |
QCA_WLAN_VENDOR_ATTR_CONFIG_SCAN_ENABLE = 51, |
| 2305 |
|
| 2306 |
/* 8-bit unsigned value to set the total beacon miss count |
| 2307 |
* This parameter will set the total beacon miss count. |
| 2308 |
*/ |
| 2309 |
QCA_WLAN_VENDOR_ATTR_CONFIG_TOTAL_BEACON_MISS_COUNT = 52, |
| 2310 |
|
| 2311 |
/* Unsigned 32-bit value to configure the number of continuous |
| 2312 |
* Beacon Miss which shall be used by the firmware to penalize |
| 2313 |
* the RSSI for BTC. |
| 2314 |
*/ |
| 2315 |
QCA_WLAN_VENDOR_ATTR_CONFIG_PENALIZE_AFTER_NCONS_BEACON_MISS_BTC = 53, |
| 2316 |
|
| 2317 |
/* 8-bit unsigned value to configure the driver and below layers to |
| 2318 |
* enable/disable all FILS features. |
| 2319 |
* 0-enable, 1-disable |
| 2320 |
*/ |
| 2321 |
QCA_WLAN_VENDOR_ATTR_CONFIG_DISABLE_FILS = 54, |
| 2322 |
|
| 2323 |
/* 16-bit unsigned value to configure the level of WLAN latency |
| 2324 |
* module. See enum qca_wlan_vendor_attr_config_latency_level. |
| 2325 |
*/ |
| 2326 |
QCA_WLAN_VENDOR_ATTR_CONFIG_LATENCY_LEVEL = 55, |
| 2327 |
|
| 2328 |
/* 8-bit unsigned value indicating the driver to use the RSNE as-is from |
| 2329 |
* the connect interface. Exclusively used for the scenarios where the |
| 2330 |
* device is used as a test bed device with special functionality and |
| 2331 |
* not recommended for production. This helps driver to not validate the |
| 2332 |
* RSNE passed from user space and thus allow arbitrary IE data to be |
| 2333 |
* used for testing purposes. |
| 2334 |
* 1-enable, 0-disable. |
| 2335 |
* Applications set/reset this configuration. If not reset, this |
| 2336 |
* parameter remains in use until the driver is unloaded. |
| 2337 |
*/ |
| 2338 |
QCA_WLAN_VENDOR_ATTR_CONFIG_RSN_IE = 56, |
| 2339 |
|
| 2340 |
/* 8-bit unsigned value to trigger green Tx power saving. |
| 2341 |
* 1-Enable, 0-Disable |
| 2342 |
*/ |
| 2343 |
QCA_WLAN_VENDOR_ATTR_CONFIG_GTX = 57, |
| 2344 |
|
| 2345 |
/* Attribute to configure disconnect IEs to the driver. |
| 2346 |
* This carries an array of unsigned 8-bit characters. |
| 2347 |
* |
| 2348 |
* If this is configured, driver shall fill the IEs in disassoc/deauth |
| 2349 |
* frame. |
| 2350 |
* These IEs are expected to be considered only for the next |
| 2351 |
* immediate disconnection (disassoc/deauth frame) originated by |
| 2352 |
* the DUT, irrespective of the entity (user space/driver/firmware) |
| 2353 |
* triggering the disconnection. |
| 2354 |
* The host drivers are not expected to use the IEs set through |
| 2355 |
* this interface for further disconnections after the first immediate |
| 2356 |
* disconnection initiated post the configuration. |
| 2357 |
* If the IEs are also updated through cfg80211 interface (after the |
| 2358 |
* enhancement to cfg80211_disconnect), host driver is expected to |
| 2359 |
* take the union of IEs from both of these interfaces and send in |
| 2360 |
* further disassoc/deauth frames. |
| 2361 |
*/ |
| 2362 |
QCA_WLAN_VENDOR_ATTR_CONFIG_DISCONNECT_IES = 58, |
| 2363 |
|
| 2364 |
/* 8-bit unsigned value for ELNA bypass. |
| 2365 |
* 1-Enable, 0-Disable |
| 2366 |
*/ |
| 2367 |
QCA_WLAN_VENDOR_ATTR_CONFIG_ELNA_BYPASS = 59, |
| 2368 |
|
| 2369 |
/* 8-bit unsigned value. This attribute enables/disables the host driver |
| 2370 |
* to send the Beacon Report Response with failure reason for the |
| 2371 |
* scenarios where STA cannot honor the Beacon Report Request from AP. |
| 2372 |
* 1-Enable, 0-Disable. |
| 2373 |
*/ |
| 2374 |
QCA_WLAN_VENDOR_ATTR_CONFIG_BEACON_REPORT_FAIL = 60, |
| 2375 |
|
| 2376 |
/* 8-bit unsigned value. This attribute enables/disables the host driver |
| 2377 |
* to send roam reason information in the Reassociation Request frame to |
| 2378 |
* the target AP when roaming within the same ESS. |
| 2379 |
* 1-Enable, 0-Disable. |
| 2380 |
*/ |
| 2381 |
QCA_WLAN_VENDOR_ATTR_CONFIG_ROAM_REASON = 61, |
| 2382 |
|
| 2383 |
/* 32-bit unsigned value to configure different PHY modes to the |
| 2384 |
* driver/firmware. The possible values are defined in |
| 2385 |
* enum qca_wlan_vendor_phy_mode. The configuration will be reset to |
| 2386 |
* default value, i.e., QCA_WLAN_VENDOR_PHY_MODE_AUTO upon restarting |
| 2387 |
* the driver. |
| 2388 |
*/ |
| 2389 |
QCA_WLAN_VENDOR_ATTR_CONFIG_PHY_MODE = 62, |
| 2390 |
|
| 2391 |
/* 8-bit unsigned value to configure the maximum supported channel width |
| 2392 |
* for STA mode. If this value is configured when STA is in connected |
| 2393 |
* state, it should not exceed the negotiated channel width. If it is |
| 2394 |
* configured when STA is in disconnected state, the configured value |
| 2395 |
* will take effect for the next immediate connection. |
| 2396 |
* Possible values are: |
| 2397 |
* NL80211_CHAN_WIDTH_20 |
| 2398 |
* NL80211_CHAN_WIDTH_40 |
| 2399 |
* NL80211_CHAN_WIDTH_80 |
| 2400 |
* NL80211_CHAN_WIDTH_80P80 |
| 2401 |
* NL80211_CHAN_WIDTH_160 |
| 2402 |
*/ |
| 2403 |
QCA_WLAN_VENDOR_ATTR_CONFIG_CHANNEL_WIDTH = 63, |
| 2404 |
|
| 2405 |
/* 8-bit unsigned value to enable/disable dynamic bandwidth adjustment. |
| 2406 |
* This attribute is only applicable for STA mode. When dynamic |
| 2407 |
* bandwidth adjustment is disabled, STA will use static channel width |
| 2408 |
* the value of which is negotiated during connection. |
| 2409 |
* 1-enable (default), 0-disable |
| 2410 |
*/ |
| 2411 |
QCA_WLAN_VENDOR_ATTR_CONFIG_DYNAMIC_BW = 64, |
| 2412 |
|
| 2413 |
/* 8-bit unsigned value to configure the maximum number of subframes of |
| 2414 |
* TX MSDU for aggregation. Possible values are 0-31. When set to 0, |
| 2415 |
* it is decided by the hardware. |
| 2416 |
*/ |
| 2417 |
QCA_WLAN_VENDOR_ATTR_CONFIG_TX_MSDU_AGGREGATION = 65, |
| 2418 |
|
| 2419 |
/* 8-bit unsigned value to configure the maximum number of subframes of |
| 2420 |
* RX MSDU for aggregation. Possible values are 0-31. When set to 0, |
| 2421 |
* it is decided by the hardware. |
| 2422 |
*/ |
| 2423 |
QCA_WLAN_VENDOR_ATTR_CONFIG_RX_MSDU_AGGREGATION = 66, |
| 2424 |
|
| 2425 |
/* 8-bit unsigned value. This attribute is used to dynamically |
| 2426 |
* enable/disable the LDPC capability of the device. When configured in |
| 2427 |
* the disconnected state, the updated configuration will be considered |
| 2428 |
* for the immediately following connection attempt. If this |
| 2429 |
* configuration is modified while the device is in the connected state, |
| 2430 |
* the LDPC TX will be updated with this configuration immediately, |
| 2431 |
* while the LDPC RX configuration update will take place starting from |
| 2432 |
* the subsequent association attempt. |
| 2433 |
* 1-Enable, 0-Disable. |
| 2434 |
*/ |
| 2435 |
QCA_WLAN_VENDOR_ATTR_CONFIG_LDPC = 67, |
| 2436 |
|
| 2437 |
/* 8-bit unsigned value. This attribute is used to dynamically |
| 2438 |
* enable/disable the TX STBC capability of the device. When configured |
| 2439 |
* in the disconnected state, the updated configuration will be |
| 2440 |
* considered for the immediately following connection attempt. If the |
| 2441 |
* connection is formed with TX STBC enabled and if this configuration |
| 2442 |
* is disabled during that association, the TX will be impacted |
| 2443 |
* immediately. Further connection attempts will disable TX STBC. |
| 2444 |
* However, enabling the TX STBC for a connected session with disabled |
| 2445 |
* capability is not allowed and will fail. |
| 2446 |
* 1-Enable, 0-Disable. |
| 2447 |
*/ |
| 2448 |
QCA_WLAN_VENDOR_ATTR_CONFIG_TX_STBC = 68, |
| 2449 |
|
| 2450 |
/* 8-bit unsigned value. This attribute is used to dynamically |
| 2451 |
* enable/disable the RX STBC capability of the device. When configured |
| 2452 |
* in the disconnected state, the updated configuration will be |
| 2453 |
* considered for the immediately following connection attempt. If the |
| 2454 |
* configuration is modified in the connected state, there will be no |
| 2455 |
* impact for the current association, but further connection attempts |
| 2456 |
* will use the updated configuration. |
| 2457 |
* 1-Enable, 0-Disable. |
| 2458 |
*/ |
| 2459 |
QCA_WLAN_VENDOR_ATTR_CONFIG_RX_STBC = 69, |
| 2460 |
|
| 2461 |
/* 8-bit unsigned value. This attribute is used to dynamically configure |
| 2462 |
* the number of spatial streams. When configured in the disconnected |
| 2463 |
* state, the updated configuration will be considered for the |
| 2464 |
* immediately following connection attempt. If the NSS is updated after |
| 2465 |
* the connection, the updated NSS value is notified to the peer using |
| 2466 |
* the Operating Mode Notification/Spatial Multiplexing Power Save |
| 2467 |
* frame. The updated NSS value after the connection shall not be |
| 2468 |
* greater than the one negotiated during the connection. Any such |
| 2469 |
* higher value configuration shall be returned with a failure. |
| 2470 |
* Only symmetric NSS configuration (such as 2X2 or 1X1) can be done |
| 2471 |
* using this attribute. QCA_WLAN_VENDOR_ATTR_CONFIG_TX_NSS and |
| 2472 |
* QCA_WLAN_VENDOR_ATTR_CONFIG_RX_NSS attributes shall be used to |
| 2473 |
* configure the asymmetric NSS configuration (such as 1X2). |
| 2474 |
*/ |
| 2475 |
QCA_WLAN_VENDOR_ATTR_CONFIG_NSS = 70, |
| 2476 |
/* 8-bit unsigned value to trigger Optimized Power Management: |
| 2477 |
* 1-Enable, 0-Disable |
| 2478 |
*/ |
| 2479 |
QCA_WLAN_VENDOR_ATTR_CONFIG_OPTIMIZED_POWER_MANAGEMENT = 71, |
| 2480 |
|
| 2481 |
/* 8-bit unsigned value. This attribute takes the QoS/access category |
| 2482 |
* value represented by the enum qca_wlan_ac_type and expects the driver |
| 2483 |
* to upgrade the UDP frames to this access category. The value of |
| 2484 |
* QCA_WLAN_AC_ALL is invalid for this attribute. This will override the |
| 2485 |
* DSCP value configured in the frame with the intention to only upgrade |
| 2486 |
* the access category. That said, it is not intended to downgrade the |
| 2487 |
* access category for the frames. |
| 2488 |
* Set the value to QCA_WLAN_AC_BK if the QoS upgrade needs to be |
| 2489 |
* disabled, as BK is of the lowest priority and an upgrade to it does |
| 2490 |
* not result in any changes for the frames. |
| 2491 |
*/ |
| 2492 |
QCA_WLAN_VENDOR_ATTR_CONFIG_UDP_QOS_UPGRADE = 72, |
| 2493 |
|
| 2494 |
/* 8-bit unsigned value. This attribute is used to dynamically configure |
| 2495 |
* the number of chains to be used for transmitting data. This |
| 2496 |
* configuration is allowed only when in connected state and will be |
| 2497 |
* effective until disconnected. The driver rejects this configuration |
| 2498 |
* if the number of spatial streams being used in the current connection |
| 2499 |
* cannot be supported by this configuration. |
| 2500 |
*/ |
| 2501 |
QCA_WLAN_VENDOR_ATTR_CONFIG_NUM_TX_CHAINS = 73, |
| 2502 |
/* 8-bit unsigned value. This attribute is used to dynamically configure |
| 2503 |
* the number of chains to be used for receiving data. This |
| 2504 |
* configuration is allowed only when in connected state and will be |
| 2505 |
* effective until disconnected. The driver rejects this configuration |
| 2506 |
* if the number of spatial streams being used in the current connection |
| 2507 |
* cannot be supported by this configuration. |
| 2508 |
*/ |
| 2509 |
QCA_WLAN_VENDOR_ATTR_CONFIG_NUM_RX_CHAINS = 74, |
| 2510 |
|
| 2511 |
/* 8-bit unsigned value to configure ANI setting type. |
| 2512 |
* See &enum qca_wlan_ani_setting for possible values. |
| 2513 |
*/ |
| 2514 |
QCA_WLAN_VENDOR_ATTR_CONFIG_ANI_SETTING = 75, |
| 2515 |
/* 32-bit signed value to configure ANI level. This is used when |
| 2516 |
* ANI settings type is &QCA_WLAN_ANI_SETTING_FIXED. |
| 2517 |
* The set and get of ANI level with &QCA_WLAN_ANI_SETTING_AUTO |
| 2518 |
* is invalid, the driver will return a failure. |
| 2519 |
*/ |
| 2520 |
QCA_WLAN_VENDOR_ATTR_CONFIG_ANI_LEVEL = 76, |
| 2521 |
|
| 2522 |
/* 8-bit unsigned value. This attribute is used to dynamically configure |
| 2523 |
* the number of spatial streams used for transmitting the data. When |
| 2524 |
* configured in the disconnected state, the configured value will |
| 2525 |
* be considered for the following connection attempt. |
| 2526 |
* If the NSS is updated after the connection, the updated NSS value |
| 2527 |
* is notified to the peer using the Operating Mode Notification/Spatial |
| 2528 |
* Multiplexing Power Save frame. |
| 2529 |
* The TX NSS value configured after the connection shall not be greater |
| 2530 |
* than the value negotiated during the connection. Any such higher |
| 2531 |
* value configuration shall be treated as invalid configuration by |
| 2532 |
* the driver. This attribute shall be configured along with |
| 2533 |
* QCA_WLAN_VENDOR_ATTR_CONFIG_RX_NSS attribute to define the symmetric |
| 2534 |
* configuration (such as 2X2 or 1X1) or the asymmetric |
| 2535 |
* configuration (such as 1X2). |
| 2536 |
* If QCA_WLAN_VENDOR_ATTR_CONFIG_NSS attribute is also provided along |
| 2537 |
* with this QCA_WLAN_VENDOR_ATTR_CONFIG_TX_NSS attribute the driver |
| 2538 |
* will update the TX NSS based on QCA_WLAN_VENDOR_ATTR_CONFIG_TX_NSS. |
| 2539 |
*/ |
| 2540 |
QCA_WLAN_VENDOR_ATTR_CONFIG_TX_NSS = 77, |
| 2541 |
|
| 2542 |
/* 8-bit unsigned value. This attribute is used to dynamically configure |
| 2543 |
* the number of spatial streams used for receiving the data. When |
| 2544 |
* configured in the disconnected state, the configured value will |
| 2545 |
* be considered for the following connection attempt. |
| 2546 |
* If the NSS is updated after the connection, the updated NSS value |
| 2547 |
* is notified to the peer using the Operating Mode Notification/Spatial |
| 2548 |
* Multiplexing Power Save frame. |
| 2549 |
* The RX NSS value configured after the connection shall not be greater |
| 2550 |
* than the value negotiated during the connection. Any such higher |
| 2551 |
* value configuration shall be treated as invalid configuration by |
| 2552 |
* the driver. This attribute shall be configured along with |
| 2553 |
* QCA_WLAN_VENDOR_ATTR_CONFIG_TX_NSS attribute to define the symmetric |
| 2554 |
* configuration (such as 2X2 or 1X1) or the asymmetric |
| 2555 |
* configuration (such as 1X2). |
| 2556 |
* If QCA_WLAN_VENDOR_ATTR_CONFIG_NSS attribute is also provided along |
| 2557 |
* with this QCA_WLAN_VENDOR_ATTR_CONFIG_RX_NSS attribute the driver |
| 2558 |
* will update the RX NSS based on QCA_WLAN_VENDOR_ATTR_CONFIG_RX_NSS. |
| 2559 |
*/ |
| 2560 |
QCA_WLAN_VENDOR_ATTR_CONFIG_RX_NSS = 78, |
| 2561 |
|
| 2562 |
/* |
| 2563 |
* 8-bit unsigned value. This attribute, when set, indicates whether the |
| 2564 |
* specified interface is the primary STA interface when there are more |
| 2565 |
* than one STA interfaces concurrently active. |
| 2566 |
* |
| 2567 |
* This configuration helps the firmware/hardware to support certain |
| 2568 |
* features (e.g., roaming) on this primary interface, if the same |
| 2569 |
* cannot be supported on the concurrent STA interfaces simultaneously. |
| 2570 |
* |
| 2571 |
* This configuration is only applicable for a single STA interface on |
| 2572 |
* a device and gives the priority for it only over other concurrent STA |
| 2573 |
* interfaces. |
| 2574 |
* |
| 2575 |
* If the device is a multi wiphy/soc, this configuration applies to a |
| 2576 |
* single STA interface across the wiphys. |
| 2577 |
* |
| 2578 |
* 1-Enable (is the primary STA), 0-Disable (is not the primary STA) |
| 2579 |
*/ |
| 2580 |
QCA_WLAN_VENDOR_ATTR_CONFIG_CONCURRENT_STA_PRIMARY = 79, |
| 2581 |
|
| 2582 |
/* |
| 2583 |
* 8-bit unsigned value. This attribute can be used to configure the |
| 2584 |
* driver to enable/disable FT-over-DS feature. Possible values for |
| 2585 |
* this attribute are 1-Enable and 0-Disable. |
| 2586 |
*/ |
| 2587 |
QCA_WLAN_VENDOR_ATTR_CONFIG_FT_OVER_DS = 80, |
| 2588 |
|
| 2589 |
/* |
| 2590 |
* 8-bit unsigned value. This attribute can be used to configure the |
| 2591 |
* firmware to enable/disable ARP/NS offload feature. Possible values |
| 2592 |
* for this attribute are 0-Disable and 1-Enable. |
| 2593 |
* |
| 2594 |
* This attribute is only applicable for STA/P2P-Client interface, |
| 2595 |
* and is optional, default behavior is ARP/NS offload enabled. |
| 2596 |
* |
| 2597 |
* This attribute can be set in disconnected and connected state, and |
| 2598 |
* will restore to the default behavior if the interface is closed. |
| 2599 |
*/ |
| 2600 |
QCA_WLAN_VENDOR_ATTR_CONFIG_ARP_NS_OFFLOAD = 81, |
| 2601 |
|
| 2602 |
/* keep last */ |
| 2603 |
QCA_WLAN_VENDOR_ATTR_CONFIG_AFTER_LAST, |
| 2604 |
QCA_WLAN_VENDOR_ATTR_CONFIG_MAX = |
| 2605 |
QCA_WLAN_VENDOR_ATTR_CONFIG_AFTER_LAST - 1, |
| 2606 |
}; |
| 2607 |
|
| 2608 |
/* Compatibility defines for previously used incorrect enum |
| 2609 |
* qca_wlan_vendor_attr_config names. These values should not be used in any |
| 2610 |
* new implementation. */ |
| 2611 |
#define QCA_WLAN_VENDOR_ATTR_DISCONNECT_IES \ |
| 2612 |
QCA_WLAN_VENDOR_ATTR_CONFIG_DISCONNECT_IES |
| 2613 |
#define QCA_WLAN_VENDOR_ATTR_BEACON_REPORT_FAIL \ |
| 2614 |
QCA_WLAN_VENDOR_ATTR_CONFIG_BEACON_REPORT_FAIL |
| 2615 |
|
| 2616 |
/** |
| 2617 |
* enum qca_wlan_ani_setting - ANI setting type |
| 2618 |
* @QCA_WLAN_ANI_SETTING_AUTO: Automatically determine ANI level |
| 2619 |
* @QCA_WLAN_ANI_SETTING_FIXED: Fix ANI level to the dBm parameter |
| 2620 |
*/ |
| 2621 |
enum qca_wlan_ani_setting { |
| 2622 |
QCA_WLAN_ANI_SETTING_AUTO = 0, |
| 2623 |
QCA_WLAN_ANI_SETTING_FIXED = 1, |
| 2624 |
}; |
| 2625 |
|
| 2626 |
/** |
| 2627 |
* enum qca_wlan_vendor_attr_sap_config - Parameters for AP configuration |
| 2628 |
* |
| 2629 |
* @QCA_WLAN_VENDOR_ATTR_SAP_CONFIG_CHANNEL: Optional (u8) |
| 2630 |
* Channel number on which Access Point should restart. |
| 2631 |
* Note: If both the driver and user space application supports the 6 GHz band, |
| 2632 |
* this attribute is deprecated and QCA_WLAN_VENDOR_ATTR_SAP_CONFIG_FREQUENCY |
| 2633 |
* should be used. |
| 2634 |
* To maintain backward compatibility, QCA_WLAN_VENDOR_ATTR_SAP_CONFIG_CHANNEL |
| 2635 |
* is still used if either of the driver or user space application doesn't |
| 2636 |
* support the 6 GHz band. |
| 2637 |
* |
| 2638 |
* @QCA_WLAN_VENDOR_ATTR_SAP_CONFIG_FREQUENCY: Optional (u32) |
| 2639 |
* Channel center frequency (MHz) on which the access point should restart. |
| 2640 |
*/ |
| 2641 |
enum qca_wlan_vendor_attr_sap_config { |
| 2642 |
QCA_WLAN_VENDOR_ATTR_SAP_CONFIG_INVALID = 0, |
| 2643 |
QCA_WLAN_VENDOR_ATTR_SAP_CONFIG_CHANNEL = 1, |
| 2644 |
|
| 2645 |
/* List of frequencies on which AP is expected to operate. |
| 2646 |
* This is irrespective of ACS configuration. This list is a priority |
| 2647 |
* based one and is looked for before the AP is created to ensure the |
| 2648 |
* best concurrency sessions (avoid MCC and use DBS/SCC) co-exist in |
| 2649 |
* the system. |
| 2650 |
*/ |
| 2651 |
QCA_WLAN_VENDOR_ATTR_SAP_MANDATORY_FREQUENCY_LIST = 2, |
| 2652 |
QCA_WLAN_VENDOR_ATTR_SAP_CONFIG_FREQUENCY = 3, |
| 2653 |
|
| 2654 |
QCA_WLAN_VENDOR_ATTR_SAP_CONFIG_AFTER_LAST, |
| 2655 |
QCA_WLAN_VENDOR_ATTR_SAP_CONFIG_MAX = |
| 2656 |
QCA_WLAN_VENDOR_ATTR_SAP_CONFIG_AFTER_LAST - 1, |
| 2657 |
}; |
| 2658 |
|
| 2659 |
/** |
| 2660 |
* enum qca_wlan_vendor_attr_sap_conditional_chan_switch - Parameters for AP |
| 2661 |
* conditional channel switch |
| 2662 |
*/ |
| 2663 |
enum qca_wlan_vendor_attr_sap_conditional_chan_switch { |
| 2664 |
QCA_WLAN_VENDOR_ATTR_SAP_CONDITIONAL_CHAN_SWITCH_INVALID = 0, |
| 2665 |
/* Priority based frequency list (an array of u32 values in host byte |
| 2666 |
* order) |
| 2667 |
*/ |
| 2668 |
QCA_WLAN_VENDOR_ATTR_SAP_CONDITIONAL_CHAN_SWITCH_FREQ_LIST = 1, |
| 2669 |
/* Status of the conditional switch (u32). |
| 2670 |
* 0: Success, Non-zero: Failure |
| 2671 |
*/ |
| 2672 |
QCA_WLAN_VENDOR_ATTR_SAP_CONDITIONAL_CHAN_SWITCH_STATUS = 2, |
| 2673 |
|
| 2674 |
QCA_WLAN_VENDOR_ATTR_SAP_CONDITIONAL_CHAN_SWITCH_AFTER_LAST, |
| 2675 |
QCA_WLAN_VENDOR_ATTR_SAP_CONDITIONAL_CHAN_SWITCH_MAX = |
| 2676 |
QCA_WLAN_VENDOR_ATTR_SAP_CONDITIONAL_CHAN_SWITCH_AFTER_LAST - 1, |
| 2677 |
}; |
| 2678 |
|
| 2679 |
/** |
| 2680 |
* enum qca_wlan_gpio_attr - Parameters for GPIO configuration |
| 2681 |
* |
| 2682 |
* @QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_COMMAND: Required (u32) |
| 2683 |
* value to specify the GPIO command. Please refer to enum qca_gpio_cmd_type |
| 2684 |
* for the available values. |
| 2685 |
* |
| 2686 |
* @QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_PINNUM: Required (u32) |
| 2687 |
* value to specify the GPIO number. |
| 2688 |
* This is required, when %QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_COMMAND is |
| 2689 |
* %QCA_WLAN_VENDOR_GPIO_CONFIG or %QCA_WLAN_VENDOR_GPIO_OUTPUT. |
| 2690 |
* |
| 2691 |
* @QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_VALUE: Required (u32) |
| 2692 |
* value to specify the GPIO output level. Please refer to enum qca_gpio_value |
| 2693 |
* for the available values. |
| 2694 |
* This is required, when %QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_COMMAND is |
| 2695 |
* %QCA_WLAN_VENDOR_GPIO_OUTPUT. |
| 2696 |
* |
| 2697 |
* @QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_PULL_TYPE: Optional (u32) |
| 2698 |
* value to specify the GPIO pull type. Please refer to enum qca_gpio_pull_type |
| 2699 |
* for the available values. |
| 2700 |
* This is required, when %QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_COMMAND is |
| 2701 |
* %QCA_WLAN_VENDOR_GPIO_CONFIG and |
| 2702 |
* %QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_INTERNAL_CONFIG attribute is not present. |
| 2703 |
* Optional when %QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_INTERNAL_CONFIG |
| 2704 |
* attribute is present. |
| 2705 |
* |
| 2706 |
* @QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_INTR_MODE: Optional (u32) |
| 2707 |
* value to specify the GPIO interrupt mode. Please refer to enum |
| 2708 |
* qca_gpio_interrupt_mode for the available values. |
| 2709 |
* This is required, when %QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_COMMAND is |
| 2710 |
* %QCA_WLAN_VENDOR_GPIO_CONFIG and |
| 2711 |
* %QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_INTERNAL_CONFIG attribute is not present. |
| 2712 |
* Optional when %QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_INTERNAL_CONFIG |
| 2713 |
* attribute is present. |
| 2714 |
* |
| 2715 |
* @QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_DIR: Optional (u32) |
| 2716 |
* value to specify the GPIO direction. Please refer to enum qca_gpio_direction |
| 2717 |
* for the available values. |
| 2718 |
* This is required, when %QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_COMMAND is |
| 2719 |
* %QCA_WLAN_VENDOR_GPIO_CONFIG and |
| 2720 |
* %QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_INTERNAL_CONFIG attribute is not present. |
| 2721 |
* Optional when %QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_INTERNAL_CONFIG |
| 2722 |
* attribute is present. |
| 2723 |
* |
| 2724 |
* @QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_MUX_CONFIG: Optional (u32) |
| 2725 |
* Value to specify the mux config. Meaning of a given value is dependent |
| 2726 |
* on the target chipset and GPIO pin. Must be of the range 0-15. |
| 2727 |
* Optional when %QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_COMMAND is |
| 2728 |
* %QCA_WLAN_VENDOR_GPIO_CONFIG. Defaults to 0. |
| 2729 |
* |
| 2730 |
* @QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_DRIVE: Optional (u32) |
| 2731 |
* Value to specify the drive, refer to enum qca_gpio_drive. |
| 2732 |
* Optional when %QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_COMMAND is |
| 2733 |
* %QCA_WLAN_VENDOR_GPIO_CONFIG. Defaults to QCA_WLAN_GPIO_DRIVE_2MA(0). |
| 2734 |
* |
| 2735 |
* @QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_INTERNAL_CONFIG: Optional (flag) |
| 2736 |
* Optional when %QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_COMMAND is |
| 2737 |
* %QCA_WLAN_VENDOR_GPIO_CONFIG. When present this attribute signals that all |
| 2738 |
* other parameters for the given GPIO will be obtained from internal |
| 2739 |
* configuration. Only %QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_PINNUM must be |
| 2740 |
* specified to indicate the GPIO pin being configured. |
| 2741 |
*/ |
| 2742 |
enum qca_wlan_gpio_attr { |
| 2743 |
QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_INVALID = 0, |
| 2744 |
/* Unsigned 32-bit attribute for GPIO command */ |
| 2745 |
QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_COMMAND = 1, |
| 2746 |
/* Unsigned 32-bit attribute for GPIO PIN number to configure */ |
| 2747 |
QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_PINNUM = 2, |
| 2748 |
/* Unsigned 32-bit attribute for GPIO value to configure */ |
| 2749 |
QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_VALUE = 3, |
| 2750 |
/* Unsigned 32-bit attribute for GPIO pull type */ |
| 2751 |
QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_PULL_TYPE = 4, |
| 2752 |
/* Unsigned 32-bit attribute for GPIO interrupt mode */ |
| 2753 |
QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_INTR_MODE = 5, |
| 2754 |
/* Unsigned 32-bit attribute for GPIO direction to configure */ |
| 2755 |
QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_DIR = 6, |
| 2756 |
/* Unsigned 32-bit attribute for GPIO mux config */ |
| 2757 |
QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_MUX_CONFIG = 7, |
| 2758 |
/* Unsigned 32-bit attribute for GPIO drive */ |
| 2759 |
QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_DRIVE = 8, |
| 2760 |
/* Flag attribute for using internal GPIO configuration */ |
| 2761 |
QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_INTERNAL_CONFIG = 9, |
| 2762 |
|
| 2763 |
/* keep last */ |
| 2764 |
QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_LAST, |
| 2765 |
QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_MAX = |
| 2766 |
QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_LAST - 1 |
| 2767 |
}; |
| 2768 |
|
| 2769 |
/** |
| 2770 |
* enum gpio_cmd_type - GPIO configuration command type |
| 2771 |
* @QCA_WLAN_VENDOR_GPIO_CONFIG: Set GPIO configuration info |
| 2772 |
* @QCA_WLAN_VENDOR_GPIO_OUTPUT: Set GPIO output level |
| 2773 |
*/ |
| 2774 |
enum qca_gpio_cmd_type { |
| 2775 |
QCA_WLAN_VENDOR_GPIO_CONFIG = 0, |
| 2776 |
QCA_WLAN_VENDOR_GPIO_OUTPUT = 1, |
| 2777 |
}; |
| 2778 |
|
| 2779 |
/** |
| 2780 |
* enum qca_gpio_pull_type - GPIO pull type |
| 2781 |
* @QCA_WLAN_GPIO_PULL_NONE: Set GPIO pull type to none |
| 2782 |
* @QCA_WLAN_GPIO_PULL_UP: Set GPIO pull up |
| 2783 |
* @QCA_WLAN_GPIO_PULL_DOWN: Set GPIO pull down |
| 2784 |
*/ |
| 2785 |
enum qca_gpio_pull_type { |
| 2786 |
QCA_WLAN_GPIO_PULL_NONE = 0, |
| 2787 |
QCA_WLAN_GPIO_PULL_UP = 1, |
| 2788 |
QCA_WLAN_GPIO_PULL_DOWN = 2, |
| 2789 |
QCA_WLAN_GPIO_PULL_MAX, |
| 2790 |
}; |
| 2791 |
|
| 2792 |
/** |
| 2793 |
* enum qca_gpio_direction - GPIO direction |
| 2794 |
* @QCA_WLAN_GPIO_INPUT: Set GPIO as input mode |
| 2795 |
* @QCA_WLAN_GPIO_OUTPUT: Set GPIO as output mode |
| 2796 |
* @QCA_WLAN_GPIO_VALUE_MAX: Invalid value |
| 2797 |
*/ |
| 2798 |
enum qca_gpio_direction { |
| 2799 |
QCA_WLAN_GPIO_INPUT = 0, |
| 2800 |
QCA_WLAN_GPIO_OUTPUT = 1, |
| 2801 |
QCA_WLAN_GPIO_DIR_MAX, |
| 2802 |
}; |
| 2803 |
|
| 2804 |
/** |
| 2805 |
* enum qca_gpio_value - GPIO Value |
| 2806 |
* @QCA_WLAN_GPIO_LEVEL_LOW: set gpio output level to low |
| 2807 |
* @QCA_WLAN_GPIO_LEVEL_HIGH: set gpio output level to high |
| 2808 |
* @QCA_WLAN_GPIO_LEVEL_MAX: Invalid value |
| 2809 |
*/ |
| 2810 |
enum qca_gpio_value { |
| 2811 |
QCA_WLAN_GPIO_LEVEL_LOW = 0, |
| 2812 |
QCA_WLAN_GPIO_LEVEL_HIGH = 1, |
| 2813 |
QCA_WLAN_GPIO_LEVEL_MAX, |
| 2814 |
}; |
| 2815 |
|
| 2816 |
/** |
| 2817 |
* enum gpio_interrupt_mode - GPIO interrupt mode |
| 2818 |
* @QCA_WLAN_GPIO_INTMODE_DISABLE: Disable interrupt trigger |
| 2819 |
* @QCA_WLAN_GPIO_INTMODE_RISING_EDGE: Interrupt with GPIO rising edge trigger |
| 2820 |
* @QCA_WLAN_GPIO_INTMODE_FALLING_EDGE: Interrupt with GPIO falling edge trigger |
| 2821 |
* @QCA_WLAN_GPIO_INTMODE_BOTH_EDGE: Interrupt with GPIO both edge trigger |
| 2822 |
* @QCA_WLAN_GPIO_INTMODE_LEVEL_LOW: Interrupt with GPIO level low trigger |
| 2823 |
* @QCA_WLAN_GPIO_INTMODE_LEVEL_HIGH: Interrupt with GPIO level high trigger |
| 2824 |
* @QCA_WLAN_GPIO_INTMODE_MAX: Invalid value |
| 2825 |
*/ |
| 2826 |
enum qca_gpio_interrupt_mode { |
| 2827 |
QCA_WLAN_GPIO_INTMODE_DISABLE = 0, |
| 2828 |
QCA_WLAN_GPIO_INTMODE_RISING_EDGE = 1, |
| 2829 |
QCA_WLAN_GPIO_INTMODE_FALLING_EDGE = 2, |
| 2830 |
QCA_WLAN_GPIO_INTMODE_BOTH_EDGE = 3, |
| 2831 |
QCA_WLAN_GPIO_INTMODE_LEVEL_LOW = 4, |
| 2832 |
QCA_WLAN_GPIO_INTMODE_LEVEL_HIGH = 5, |
| 2833 |
QCA_WLAN_GPIO_INTMODE_MAX, |
| 2834 |
}; |
| 2835 |
|
| 2836 |
/** |
| 2837 |
* enum qca_gpio_drive - GPIO drive |
| 2838 |
* @QCA_WLAN_GPIO_DRIVE_2MA: drive 2MA |
| 2839 |
* @QCA_WLAN_GPIO_DRIVE_4MA: drive 4MA |
| 2840 |
* @QCA_WLAN_GPIO_DRIVE_6MA: drive 6MA |
| 2841 |
* @QCA_WLAN_GPIO_DRIVE_8MA: drive 8MA |
| 2842 |
* @QCA_WLAN_GPIO_DRIVE_10MA: drive 10MA |
| 2843 |
* @QCA_WLAN_GPIO_DRIVE_12MA: drive 12MA |
| 2844 |
* @QCA_WLAN_GPIO_DRIVE_14MA: drive 14MA |
| 2845 |
* @QCA_WLAN_GPIO_DRIVE_16MA: drive 16MA |
| 2846 |
* @QCA_WLAN_GPIO_DRIVE_MAX: invalid GPIO drive |
| 2847 |
*/ |
| 2848 |
enum qca_gpio_drive { |
| 2849 |
QCA_WLAN_GPIO_DRIVE_2MA = 0, |
| 2850 |
QCA_WLAN_GPIO_DRIVE_4MA = 1, |
| 2851 |
QCA_WLAN_GPIO_DRIVE_6MA = 2, |
| 2852 |
QCA_WLAN_GPIO_DRIVE_8MA = 3, |
| 2853 |
QCA_WLAN_GPIO_DRIVE_10MA = 4, |
| 2854 |
QCA_WLAN_GPIO_DRIVE_12MA = 5, |
| 2855 |
QCA_WLAN_GPIO_DRIVE_14MA = 6, |
| 2856 |
QCA_WLAN_GPIO_DRIVE_16MA = 7, |
| 2857 |
QCA_WLAN_GPIO_DRIVE_MAX, |
| 2858 |
}; |
| 2859 |
|
| 2860 |
/** |
| 2861 |
* qca_wlan_set_qdepth_thresh_attr - Parameters for setting |
| 2862 |
* MSDUQ depth threshold per peer per tid in the target |
| 2863 |
* |
| 2864 |
* Associated Vendor Command: |
| 2865 |
* QCA_NL80211_VENDOR_SUBCMD_SET_QDEPTH_THRESH |
| 2866 |
*/ |
| 2867 |
enum qca_wlan_set_qdepth_thresh_attr { |
| 2868 |
QCA_WLAN_VENDOR_ATTR_QDEPTH_THRESH_INVALID = 0, |
| 2869 |
/* 6-byte MAC address */ |
| 2870 |
QCA_WLAN_VENDOR_ATTR_QDEPTH_THRESH_MAC_ADDR, |
| 2871 |
/* Unsigned 32-bit attribute for holding the TID */ |
| 2872 |
QCA_WLAN_VENDOR_ATTR_QDEPTH_THRESH_TID, |
| 2873 |
/* Unsigned 32-bit attribute for holding the update mask |
| 2874 |
* bit 0 - Update high priority msdu qdepth threshold |
| 2875 |
* bit 1 - Update low priority msdu qdepth threshold |
| 2876 |
* bit 2 - Update UDP msdu qdepth threshold |
| 2877 |
* bit 3 - Update Non UDP msdu qdepth threshold |
| 2878 |
* rest of bits are reserved |
| 2879 |
*/ |
| 2880 |
QCA_WLAN_VENDOR_ATTR_QDEPTH_THRESH_UPDATE_MASK, |
| 2881 |
/* Unsigned 32-bit attribute for holding the threshold value */ |
| 2882 |
QCA_WLAN_VENDOR_ATTR_QDEPTH_THRESH_VALUE, |
| 2883 |
|
| 2884 |
/* keep last */ |
| 2885 |
QCA_WLAN_VENDOR_ATTR_QDEPTH_THRESH_LAST, |
| 2886 |
QCA_WLAN_VENDOR_ATTR_QDEPTH_THRESH_MAX = |
| 2887 |
QCA_WLAN_VENDOR_ATTR_QDEPTH_THRESH_LAST - 1, |
| 2888 |
}; |
| 2889 |
|
| 2890 |
/** |
| 2891 |
* enum qca_acs_dfs_mode - Defines different types of DFS channel |
| 2892 |
* configurations for ACS operation. |
| 2893 |
* |
| 2894 |
* @QCA_ACS_DFS_MODE_NONE: Refer to invalid DFS mode |
| 2895 |
* @QCA_ACS_DFS_MODE_ENABLE: Consider DFS channels in ACS operation |
| 2896 |
* @QCA_ACS_DFS_MODE_DISABLE: Do not consider DFS channels in ACS operation |
| 2897 |
* @QCA_ACS_DFS_MODE_DEPRIORITIZE: Deprioritize DFS channels in ACS operation |
| 2898 |
*/ |
| 2899 |
enum qca_acs_dfs_mode { |
| 2900 |
QCA_ACS_DFS_MODE_NONE = 0, |
| 2901 |
QCA_ACS_DFS_MODE_ENABLE = 1, |
| 2902 |
QCA_ACS_DFS_MODE_DISABLE = 2, |
| 2903 |
QCA_ACS_DFS_MODE_DEPRIORITIZE = 3, |
| 2904 |
}; |
| 2905 |
|
| 2906 |
/** |
| 2907 |
* enum qca_wlan_vendor_attr_acs_config - Defines Configuration attributes |
| 2908 |
* used by the vendor command QCA_NL80211_VENDOR_SUBCMD_ACS_POLICY. |
| 2909 |
* |
| 2910 |
* @QCA_WLAN_VENDOR_ATTR_ACS_DFS_MODE: Required (u8) |
| 2911 |
* DFS mode for ACS operation from enum qca_acs_dfs_mode. |
| 2912 |
* |
| 2913 |
* @QCA_WLAN_VENDOR_ATTR_ACS_CHANNEL_HINT: Required (u8) |
| 2914 |
* channel number hint for ACS operation, if valid channel is specified then |
| 2915 |
* ACS operation gives priority to this channel. |
| 2916 |
* Note: If both the driver and user space application supports the 6 GHz band, |
| 2917 |
* this attribute is deprecated and QCA_WLAN_VENDOR_ATTR_ACS_FREQUENCY_HINT |
| 2918 |
* should be used. |
| 2919 |
* To maintain backward compatibility, QCA_WLAN_VENDOR_ATTR_ACS_CHANNEL_HINT |
| 2920 |
* is still used if either of the driver or user space application doesn't |
| 2921 |
* support the 6 GHz band. |
| 2922 |
* |
| 2923 |
* @QCA_WLAN_VENDOR_ATTR_ACS_FREQUENCY_HINT: Required (u32). |
| 2924 |
* Channel center frequency (MHz) hint for ACS operation, if a valid center |
| 2925 |
* frequency is specified, ACS operation gives priority to this channel. |
| 2926 |
*/ |
| 2927 |
enum qca_wlan_vendor_attr_acs_config { |
| 2928 |
QCA_WLAN_VENDOR_ATTR_ACS_MODE_INVALID = 0, |
| 2929 |
QCA_WLAN_VENDOR_ATTR_ACS_DFS_MODE = 1, |
| 2930 |
QCA_WLAN_VENDOR_ATTR_ACS_CHANNEL_HINT = 2, |
| 2931 |
QCA_WLAN_VENDOR_ATTR_ACS_FREQUENCY_HINT = 3, |
| 2932 |
|
| 2933 |
QCA_WLAN_VENDOR_ATTR_ACS_DFS_AFTER_LAST, |
| 2934 |
QCA_WLAN_VENDOR_ATTR_ACS_DFS_MAX = |
| 2935 |
QCA_WLAN_VENDOR_ATTR_ACS_DFS_AFTER_LAST - 1, |
| 2936 |
}; |
| 2937 |
|
| 2938 |
/** |
| 2939 |
* enum qca_wlan_vendor_attr_get_hw_capability - Wi-Fi hardware capability |
| 2940 |
*/ |
| 2941 |
enum qca_wlan_vendor_attr_get_hw_capability { |
| 2942 |
QCA_WLAN_VENDOR_ATTR_HW_CAPABILITY_INVALID, |
| 2943 |
/* Antenna isolation |
| 2944 |
* An attribute used in the response. |
| 2945 |
* The content of this attribute is encoded in a byte array. Each byte |
| 2946 |
* value is an antenna isolation value. The array length is the number |
| 2947 |
* of antennas. |
| 2948 |
*/ |
| 2949 |
QCA_WLAN_VENDOR_ATTR_ANTENNA_ISOLATION, |
| 2950 |
/* Request HW capability |
| 2951 |
* An attribute used in the request. |
| 2952 |
* The content of this attribute is a u32 array for one or more of |
| 2953 |
* hardware capabilities (attribute IDs) that are being requested. Each |
| 2954 |
* u32 value has a value from this |
| 2955 |
* enum qca_wlan_vendor_attr_get_hw_capability |
| 2956 |
* identifying which capabilities are requested. |
| 2957 |
*/ |
| 2958 |
QCA_WLAN_VENDOR_ATTR_GET_HW_CAPABILITY, |
| 2959 |
|
| 2960 |
/* keep last */ |
| 2961 |
QCA_WLAN_VENDOR_ATTR_HW_CAPABILITY_AFTER_LAST, |
| 2962 |
QCA_WLAN_VENDOR_ATTR_HW_CAPABILITY_MAX = |
| 2963 |
QCA_WLAN_VENDOR_ATTR_HW_CAPABILITY_AFTER_LAST - 1, |
| 2964 |
}; |
| 2965 |
|
| 2966 |
/** |
| 2967 |
* enum qca_wlan_vendor_attr_ll_stats_ext - Attributes for MAC layer monitoring |
| 2968 |
* offload which is an extension for LL_STATS. |
| 2969 |
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_CFG_PERIOD: Monitoring period. Unit in ms. |
| 2970 |
* If MAC counters do not exceed the threshold, FW will report monitored |
| 2971 |
* link layer counters periodically as this setting. The first report is |
| 2972 |
* always triggered by this timer. |
| 2973 |
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_CFG_THRESHOLD: It is a percentage (1-99). |
| 2974 |
* For each MAC layer counter, FW holds two copies. One is the current value. |
| 2975 |
* The other is the last report. Once a current counter's increment is larger |
| 2976 |
* than the threshold, FW will indicate that counter to host even if the |
| 2977 |
* monitoring timer does not expire. |
| 2978 |
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_PS_CHG: Peer STA power state change |
| 2979 |
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TID: TID of MSDU |
| 2980 |
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_NUM_MSDU: Count of MSDU with the same |
| 2981 |
* failure code. |
| 2982 |
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_STATUS: TX failure code |
| 2983 |
* 1: TX packet discarded |
| 2984 |
* 2: No ACK |
| 2985 |
* 3: Postpone |
| 2986 |
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_MAC_ADDRESS: peer MAC address |
| 2987 |
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_PS_STATE: Peer STA current state |
| 2988 |
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_GLOBAL: Global threshold. |
| 2989 |
* Threshold for all monitored parameters. If per counter dedicated threshold |
| 2990 |
* is not enabled, this threshold will take effect. |
| 2991 |
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_EVENT_MODE: Indicate what triggers this |
| 2992 |
* event, PERORID_TIMEOUT == 1, THRESH_EXCEED == 0. |
| 2993 |
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_IFACE_ID: interface ID |
| 2994 |
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_ID: peer ID |
| 2995 |
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_BITMAP: bitmap for TX counters |
| 2996 |
* Bit0: TX counter unit in MSDU |
| 2997 |
* Bit1: TX counter unit in MPDU |
| 2998 |
* Bit2: TX counter unit in PPDU |
| 2999 |
* Bit3: TX counter unit in byte |
| 3000 |
* Bit4: Dropped MSDUs |
| 3001 |
* Bit5: Dropped Bytes |
| 3002 |
* Bit6: MPDU retry counter |
| 3003 |
* Bit7: MPDU failure counter |
| 3004 |
* Bit8: PPDU failure counter |
| 3005 |
* Bit9: MPDU aggregation counter |
| 3006 |
* Bit10: MCS counter for ACKed MPDUs |
| 3007 |
* Bit11: MCS counter for Failed MPDUs |
| 3008 |
* Bit12: TX Delay counter |
| 3009 |
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_BITMAP: bitmap for RX counters |
| 3010 |
* Bit0: MAC RX counter unit in MPDU |
| 3011 |
* Bit1: MAC RX counter unit in byte |
| 3012 |
* Bit2: PHY RX counter unit in PPDU |
| 3013 |
* Bit3: PHY RX counter unit in byte |
| 3014 |
* Bit4: Disorder counter |
| 3015 |
* Bit5: Retry counter |
| 3016 |
* Bit6: Duplication counter |
| 3017 |
* Bit7: Discard counter |
| 3018 |
* Bit8: MPDU aggregation size counter |
| 3019 |
* Bit9: MCS counter |
| 3020 |
* Bit10: Peer STA power state change (wake to sleep) counter |
| 3021 |
* Bit11: Peer STA power save counter, total time in PS mode |
| 3022 |
* Bit12: Probe request counter |
| 3023 |
* Bit13: Other management frames counter |
| 3024 |
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_CCA_BSS_BITMAP: bitmap for CCA |
| 3025 |
* Bit0: Idle time |
| 3026 |
* Bit1: TX time |
| 3027 |
* Bit2: time RX in current bss |
| 3028 |
* Bit3: Out of current bss time |
| 3029 |
* Bit4: Wireless medium busy time |
| 3030 |
* Bit5: RX in bad condition time |
| 3031 |
* Bit6: TX in bad condition time |
| 3032 |
* Bit7: time wlan card not available |
| 3033 |
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_SIGNAL_BITMAP: bitmap for signal |
| 3034 |
* Bit0: Per channel SNR counter |
| 3035 |
* Bit1: Per channel noise floor counter |
| 3036 |
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_NUM: number of peers |
| 3037 |
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_CHANNEL_NUM: number of channels |
| 3038 |
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_AC_RX_NUM: number of RX stats |
| 3039 |
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_CCA_BSS: per channel BSS CCA stats |
| 3040 |
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER: container for per PEER stats |
| 3041 |
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_MSDU: Number of total TX MSDUs |
| 3042 |
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_MPDU: Number of total TX MPDUs |
| 3043 |
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_PPDU: Number of total TX PPDUs |
| 3044 |
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_BYTES: bytes of TX data |
| 3045 |
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_DROP: Number of dropped TX packets |
| 3046 |
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_DROP_BYTES: Bytes dropped |
| 3047 |
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_RETRY: waiting time without an ACK |
| 3048 |
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_NO_ACK: number of MPDU not-ACKed |
| 3049 |
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_NO_BACK: number of PPDU not-ACKed |
| 3050 |
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_AGGR_NUM: |
| 3051 |
* aggregation stats buffer length |
| 3052 |
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_SUCC_MCS_NUM: length of mcs stats |
| 3053 |
* buffer for ACKed MPDUs. |
| 3054 |
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_FAIL_MCS_NUM: length of mcs stats |
| 3055 |
* buffer for failed MPDUs. |
| 3056 |
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_DELAY_ARRAY_SIZE: |
| 3057 |
* length of delay stats array. |
| 3058 |
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_AGGR: TX aggregation stats |
| 3059 |
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_SUCC_MCS: MCS stats for ACKed MPDUs |
| 3060 |
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_FAIL_MCS: MCS stats for failed MPDUs |
| 3061 |
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_DELAY: tx delay stats |
| 3062 |
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MPDU: MPDUs received |
| 3063 |
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MPDU_BYTES: bytes received |
| 3064 |
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_PPDU: PPDU received |
| 3065 |
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_PPDU_BYTES: PPDU bytes received |
| 3066 |
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MPDU_LOST: packets lost |
| 3067 |
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MPDU_RETRY: number of RX packets |
| 3068 |
* flagged as retransmissions |
| 3069 |
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MPDU_DUP: number of RX packets |
| 3070 |
* flagged as duplicated |
| 3071 |
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MPDU_DISCARD: number of RX |
| 3072 |
* packets discarded |
| 3073 |
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_AGGR_NUM: length of RX aggregation |
| 3074 |
* stats buffer. |
| 3075 |
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MCS_NUM: length of RX mcs |
| 3076 |
* stats buffer. |
| 3077 |
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MCS: RX mcs stats buffer |
| 3078 |
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_AGGR: aggregation stats buffer |
| 3079 |
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_PS_TIMES: times STAs go to sleep |
| 3080 |
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_PS_DURATION: STAs' total sleep time |
| 3081 |
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_PROBE_REQ: number of probe |
| 3082 |
* requests received |
| 3083 |
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MGMT: number of other mgmt |
| 3084 |
* frames received |
| 3085 |
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_IDLE_TIME: Percentage of idle time |
| 3086 |
* there is no TX, nor RX, nor interference. |
| 3087 |
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_TIME: percentage of time |
| 3088 |
* transmitting packets. |
| 3089 |
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_TIME: percentage of time |
| 3090 |
* for receiving. |
| 3091 |
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_BUSY: percentage of time |
| 3092 |
* interference detected. |
| 3093 |
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_BAD: percentage of time |
| 3094 |
* receiving packets with errors. |
| 3095 |
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_BAD: percentage of time |
| 3096 |
* TX no-ACK. |
| 3097 |
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_NO_AVAIL: percentage of time |
| 3098 |
* the chip is unable to work in normal conditions. |
| 3099 |
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_IN_BSS_TIME: percentage of time |
| 3100 |
* receiving packets in current BSS. |
| 3101 |
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_OUT_BSS_TIME: percentage of time |
| 3102 |
* receiving packets not in current BSS. |
| 3103 |
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_ANT_NUM: number of antennas |
| 3104 |
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_SIGNAL: |
| 3105 |
* This is a container for per antenna signal stats. |
| 3106 |
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_ANT_SNR: per antenna SNR value |
| 3107 |
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_ANT_NF: per antenna NF value |
| 3108 |
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_IFACE_RSSI_BEACON: RSSI of beacon |
| 3109 |
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_IFACE_SNR_BEACON: SNR of beacon |
| 3110 |
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_REPORT_TIME: u64 |
| 3111 |
* Absolute timestamp from 1970/1/1, unit in ms. After receiving the |
| 3112 |
* message, user layer APP could call gettimeofday to get another |
| 3113 |
* timestamp and calculate transfer delay for the message. |
| 3114 |
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_MEASUREMENT_TIME: u32 |
| 3115 |
* Real period for this measurement, unit in us. |
| 3116 |
*/ |
| 3117 |
enum qca_wlan_vendor_attr_ll_stats_ext { |
| 3118 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_INVALID = 0, |
| 3119 |
|
| 3120 |
/* Attributes for configurations */ |
| 3121 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_CFG_PERIOD, |
| 3122 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_CFG_THRESHOLD, |
| 3123 |
|
| 3124 |
/* Peer STA power state change */ |
| 3125 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_PS_CHG, |
| 3126 |
|
| 3127 |
/* TX failure event */ |
| 3128 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TID, |
| 3129 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_NUM_MSDU, |
| 3130 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_STATUS, |
| 3131 |
|
| 3132 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_PS_STATE, |
| 3133 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_MAC_ADDRESS, |
| 3134 |
|
| 3135 |
/* MAC counters */ |
| 3136 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_GLOBAL, |
| 3137 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_EVENT_MODE, |
| 3138 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_IFACE_ID, |
| 3139 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_ID, |
| 3140 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_BITMAP, |
| 3141 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_BITMAP, |
| 3142 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_CCA_BSS_BITMAP, |
| 3143 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_SIGNAL_BITMAP, |
| 3144 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_NUM, |
| 3145 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_CHANNEL_NUM, |
| 3146 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_CCA_BSS, |
| 3147 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER, |
| 3148 |
|
| 3149 |
/* Sub-attributes for PEER_AC_TX */ |
| 3150 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_MSDU, |
| 3151 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_MPDU, |
| 3152 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_PPDU, |
| 3153 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_BYTES, |
| 3154 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_DROP, |
| 3155 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_DROP_BYTES, |
| 3156 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_RETRY, |
| 3157 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_NO_ACK, |
| 3158 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_NO_BACK, |
| 3159 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_AGGR_NUM, |
| 3160 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_SUCC_MCS_NUM, |
| 3161 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_FAIL_MCS_NUM, |
| 3162 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_AGGR, |
| 3163 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_SUCC_MCS, |
| 3164 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_FAIL_MCS, |
| 3165 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_DELAY_ARRAY_SIZE, |
| 3166 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_DELAY, |
| 3167 |
|
| 3168 |
/* Sub-attributes for PEER_AC_RX */ |
| 3169 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MPDU, |
| 3170 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MPDU_BYTES, |
| 3171 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_PPDU, |
| 3172 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_PPDU_BYTES, |
| 3173 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MPDU_LOST, |
| 3174 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MPDU_RETRY, |
| 3175 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MPDU_DUP, |
| 3176 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MPDU_DISCARD, |
| 3177 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_AGGR_NUM, |
| 3178 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MCS_NUM, |
| 3179 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MCS, |
| 3180 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_AGGR, |
| 3181 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_PS_TIMES, |
| 3182 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_PS_DURATION, |
| 3183 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_PROBE_REQ, |
| 3184 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MGMT, |
| 3185 |
|
| 3186 |
/* Sub-attributes for CCA_BSS */ |
| 3187 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_IDLE_TIME, |
| 3188 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_TIME, |
| 3189 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_TIME, |
| 3190 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_BUSY, |
| 3191 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_BAD, |
| 3192 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_BAD, |
| 3193 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_NO_AVAIL, |
| 3194 |
|
| 3195 |
/* sub-attribute for BSS_RX_TIME */ |
| 3196 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_IN_BSS_TIME, |
| 3197 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_OUT_BSS_TIME, |
| 3198 |
|
| 3199 |
/* Sub-attributes for PEER_SIGNAL */ |
| 3200 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_ANT_NUM, |
| 3201 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_SIGNAL, |
| 3202 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_ANT_SNR, |
| 3203 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_ANT_NF, |
| 3204 |
|
| 3205 |
/* Sub-attributes for IFACE_BSS */ |
| 3206 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_IFACE_RSSI_BEACON, |
| 3207 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_IFACE_SNR_BEACON, |
| 3208 |
|
| 3209 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_REPORT_TIME, |
| 3210 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_MEASUREMENT_TIME, |
| 3211 |
|
| 3212 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_LAST, |
| 3213 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_MAX = |
| 3214 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_LAST - 1 |
| 3215 |
}; |
| 3216 |
|
| 3217 |
/* Attributes for FTM commands and events */ |
| 3218 |
|
| 3219 |
/** |
| 3220 |
* enum qca_wlan_vendor_attr_loc_capa - Indoor location capabilities |
| 3221 |
* |
| 3222 |
* @QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAGS: Various flags. See |
| 3223 |
* enum qca_wlan_vendor_attr_loc_capa_flags. |
| 3224 |
* @QCA_WLAN_VENDOR_ATTR_FTM_CAPA_MAX_NUM_SESSIONS: Maximum number |
| 3225 |
* of measurement sessions that can run concurrently. |
| 3226 |
* Default is one session (no session concurrency). |
| 3227 |
* @QCA_WLAN_VENDOR_ATTR_FTM_CAPA_MAX_NUM_PEERS: The total number of unique |
| 3228 |
* peers that are supported in running sessions. For example, |
| 3229 |
* if the value is 8 and maximum number of sessions is 2, you can |
| 3230 |
* have one session with 8 unique peers, or 2 sessions with 4 unique |
| 3231 |
* peers each, and so on. |
| 3232 |
* @QCA_WLAN_VENDOR_ATTR_FTM_CAPA_MAX_NUM_BURSTS_EXP: Maximum number |
| 3233 |
* of bursts per peer, as an exponent (2^value). Default is 0, |
| 3234 |
* meaning no multi-burst support. |
| 3235 |
* @QCA_WLAN_VENDOR_ATTR_FTM_CAPA_MAX_MEAS_PER_BURST: Maximum number |
| 3236 |
* of measurement exchanges allowed in a single burst. |
| 3237 |
* @QCA_WLAN_VENDOR_ATTR_AOA_CAPA_SUPPORTED_TYPES: Supported AOA measurement |
| 3238 |
* types. A bit mask (unsigned 32 bit value), each bit corresponds |
| 3239 |
* to an AOA type as defined by enum qca_vendor_attr_aoa_type. |
| 3240 |
*/ |
| 3241 |
enum qca_wlan_vendor_attr_loc_capa { |
| 3242 |
QCA_WLAN_VENDOR_ATTR_LOC_CAPA_INVALID, |
| 3243 |
QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAGS, |
| 3244 |
QCA_WLAN_VENDOR_ATTR_FTM_CAPA_MAX_NUM_SESSIONS, |
| 3245 |
QCA_WLAN_VENDOR_ATTR_FTM_CAPA_MAX_NUM_PEERS, |
| 3246 |
QCA_WLAN_VENDOR_ATTR_FTM_CAPA_MAX_NUM_BURSTS_EXP, |
| 3247 |
QCA_WLAN_VENDOR_ATTR_FTM_CAPA_MAX_MEAS_PER_BURST, |
| 3248 |
QCA_WLAN_VENDOR_ATTR_AOA_CAPA_SUPPORTED_TYPES, |
| 3249 |
/* keep last */ |
| 3250 |
QCA_WLAN_VENDOR_ATTR_LOC_CAPA_AFTER_LAST, |
| 3251 |
QCA_WLAN_VENDOR_ATTR_LOC_CAPA_MAX = |
| 3252 |
QCA_WLAN_VENDOR_ATTR_LOC_CAPA_AFTER_LAST - 1, |
| 3253 |
}; |
| 3254 |
|
| 3255 |
/** |
| 3256 |
* enum qca_wlan_vendor_attr_loc_capa_flags: Indoor location capability flags |
| 3257 |
* |
| 3258 |
* @QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAG_FTM_RESPONDER: Set if driver |
| 3259 |
* can be configured as an FTM responder (for example, an AP that |
| 3260 |
* services FTM requests). QCA_NL80211_VENDOR_SUBCMD_FTM_CFG_RESPONDER |
| 3261 |
* will be supported if set. |
| 3262 |
* @QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAG_FTM_INITIATOR: Set if driver |
| 3263 |
* can run FTM sessions. QCA_NL80211_VENDOR_SUBCMD_FTM_START_SESSION |
| 3264 |
* will be supported if set. |
| 3265 |
* @QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAG_ASAP: Set if FTM responder |
| 3266 |
* supports immediate (ASAP) response. |
| 3267 |
* @QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAG_AOA: Set if driver supports standalone |
| 3268 |
* AOA measurement using QCA_NL80211_VENDOR_SUBCMD_AOA_MEAS. |
| 3269 |
* @QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAG_AOA_IN_FTM: Set if driver supports |
| 3270 |
* requesting AOA measurements as part of an FTM session. |
| 3271 |
*/ |
| 3272 |
enum qca_wlan_vendor_attr_loc_capa_flags { |
| 3273 |
QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAG_FTM_RESPONDER = 1 << 0, |
| 3274 |
QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAG_FTM_INITIATOR = 1 << 1, |
| 3275 |
QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAG_ASAP = 1 << 2, |
| 3276 |
QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAG_AOA = 1 << 3, |
| 3277 |
QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAG_AOA_IN_FTM = 1 << 4, |
| 3278 |
}; |
| 3279 |
|
| 3280 |
/** |
| 3281 |
* enum qca_wlan_vendor_attr_ftm_peer_info: Information about |
| 3282 |
* a single peer in a measurement session. |
| 3283 |
* |
| 3284 |
* @QCA_WLAN_VENDOR_ATTR_FTM_PEER_MAC_ADDR: The MAC address of the peer. |
| 3285 |
* @QCA_WLAN_VENDOR_ATTR_FTM_PEER_MEAS_FLAGS: Various flags related |
| 3286 |
* to measurement. See enum qca_wlan_vendor_attr_ftm_peer_meas_flags. |
| 3287 |
* @QCA_WLAN_VENDOR_ATTR_FTM_PEER_MEAS_PARAMS: Nested attribute of |
| 3288 |
* FTM measurement parameters, as specified by IEEE P802.11-REVmc/D7.0 |
| 3289 |
* 9.4.2.167. See enum qca_wlan_vendor_attr_ftm_meas_param for |
| 3290 |
* list of supported attributes. |
| 3291 |
* @QCA_WLAN_VENDOR_ATTR_FTM_PEER_SECURE_TOKEN_ID: Initial token ID for |
| 3292 |
* secure measurement. |
| 3293 |
* @QCA_WLAN_VENDOR_ATTR_FTM_PEER_AOA_BURST_PERIOD: Request AOA |
| 3294 |
* measurement every <value> bursts. If 0 or not specified, |
| 3295 |
* AOA measurements will be disabled for this peer. |
| 3296 |
* @QCA_WLAN_VENDOR_ATTR_FTM_PEER_FREQ: Frequency in MHz where |
| 3297 |
* the measurement frames are exchanged. Optional; if not |
| 3298 |
* specified, try to locate the peer in the kernel scan |
| 3299 |
* results cache and use frequency from there. |
| 3300 |
*/ |
| 3301 |
enum qca_wlan_vendor_attr_ftm_peer_info { |
| 3302 |
QCA_WLAN_VENDOR_ATTR_FTM_PEER_INVALID, |
| 3303 |
QCA_WLAN_VENDOR_ATTR_FTM_PEER_MAC_ADDR, |
| 3304 |
QCA_WLAN_VENDOR_ATTR_FTM_PEER_MEAS_FLAGS, |
| 3305 |
QCA_WLAN_VENDOR_ATTR_FTM_PEER_MEAS_PARAMS, |
| 3306 |
QCA_WLAN_VENDOR_ATTR_FTM_PEER_SECURE_TOKEN_ID, |
| 3307 |
QCA_WLAN_VENDOR_ATTR_FTM_PEER_AOA_BURST_PERIOD, |
| 3308 |
QCA_WLAN_VENDOR_ATTR_FTM_PEER_FREQ, |
| 3309 |
/* keep last */ |
| 3310 |
QCA_WLAN_VENDOR_ATTR_FTM_PEER_AFTER_LAST, |
| 3311 |
QCA_WLAN_VENDOR_ATTR_FTM_PEER_MAX = |
| 3312 |
QCA_WLAN_VENDOR_ATTR_FTM_PEER_AFTER_LAST - 1, |
| 3313 |
}; |
| 3314 |
|
| 3315 |
/** |
| 3316 |
* enum qca_wlan_vendor_attr_ftm_peer_meas_flags: Measurement request flags, |
| 3317 |
* per-peer |
| 3318 |
* |
| 3319 |
* @QCA_WLAN_VENDOR_ATTR_FTM_PEER_MEAS_FLAG_ASAP: If set, request |
| 3320 |
* immediate (ASAP) response from peer. |
| 3321 |
* @QCA_WLAN_VENDOR_ATTR_FTM_PEER_MEAS_FLAG_LCI: If set, request |
| 3322 |
* LCI report from peer. The LCI report includes the absolute |
| 3323 |
* location of the peer in "official" coordinates (similar to GPS). |
| 3324 |
* See IEEE P802.11-REVmc/D7.0, 11.24.6.7 for more information. |
| 3325 |
* @QCA_WLAN_VENDOR_ATTR_FTM_PEER_MEAS_FLAG_LCR: If set, request |
| 3326 |
* Location civic report from peer. The LCR includes the location |
| 3327 |
* of the peer in free-form format. See IEEE P802.11-REVmc/D7.0, |
| 3328 |
* 11.24.6.7 for more information. |
| 3329 |
* @QCA_WLAN_VENDOR_ATTR_FTM_PEER_MEAS_FLAG_SECURE: If set, |
| 3330 |
* request a secure measurement. |
| 3331 |
* QCA_WLAN_VENDOR_ATTR_FTM_PEER_SECURE_TOKEN_ID must also be provided. |
| 3332 |
*/ |
| 3333 |
enum qca_wlan_vendor_attr_ftm_peer_meas_flags { |
| 3334 |
QCA_WLAN_VENDOR_ATTR_FTM_PEER_MEAS_FLAG_ASAP = 1 << 0, |
| 3335 |
QCA_WLAN_VENDOR_ATTR_FTM_PEER_MEAS_FLAG_LCI = 1 << 1, |
| 3336 |
QCA_WLAN_VENDOR_ATTR_FTM_PEER_MEAS_FLAG_LCR = 1 << 2, |
| 3337 |
QCA_WLAN_VENDOR_ATTR_FTM_PEER_MEAS_FLAG_SECURE = 1 << 3, |
| 3338 |
}; |
| 3339 |
|
| 3340 |
/** |
| 3341 |
* enum qca_wlan_vendor_attr_ftm_meas_param: Measurement parameters |
| 3342 |
* |
| 3343 |
* @QCA_WLAN_VENDOR_ATTR_FTM_PARAM_MEAS_PER_BURST: Number of measurements |
| 3344 |
* to perform in a single burst. |
| 3345 |
* @QCA_WLAN_VENDOR_ATTR_FTM_PARAM_NUM_BURSTS_EXP: Number of bursts to |
| 3346 |
* perform, specified as an exponent (2^value). |
| 3347 |
* @QCA_WLAN_VENDOR_ATTR_FTM_PARAM_BURST_DURATION: Duration of burst |
| 3348 |
* instance, as specified in IEEE P802.11-REVmc/D7.0, 9.4.2.167. |
| 3349 |
* @QCA_WLAN_VENDOR_ATTR_FTM_PARAM_BURST_PERIOD: Time between bursts, |
| 3350 |
* as specified in IEEE P802.11-REVmc/D7.0, 9.4.2.167. Must |
| 3351 |
* be larger than QCA_WLAN_VENDOR_ATTR_FTM_PARAM_BURST_DURATION. |
| 3352 |
*/ |
| 3353 |
enum qca_wlan_vendor_attr_ftm_meas_param { |
| 3354 |
QCA_WLAN_VENDOR_ATTR_FTM_PARAM_INVALID, |
| 3355 |
QCA_WLAN_VENDOR_ATTR_FTM_PARAM_MEAS_PER_BURST, |
| 3356 |
QCA_WLAN_VENDOR_ATTR_FTM_PARAM_NUM_BURSTS_EXP, |
| 3357 |
QCA_WLAN_VENDOR_ATTR_FTM_PARAM_BURST_DURATION, |
| 3358 |
QCA_WLAN_VENDOR_ATTR_FTM_PARAM_BURST_PERIOD, |
| 3359 |
/* keep last */ |
| 3360 |
QCA_WLAN_VENDOR_ATTR_FTM_PARAM_AFTER_LAST, |
| 3361 |
QCA_WLAN_VENDOR_ATTR_FTM_PARAM_MAX = |
| 3362 |
QCA_WLAN_VENDOR_ATTR_FTM_PARAM_AFTER_LAST - 1, |
| 3363 |
}; |
| 3364 |
|
| 3365 |
/** |
| 3366 |
* enum qca_wlan_vendor_attr_ftm_peer_result: Per-peer results |
| 3367 |
* |
| 3368 |
* @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_MAC_ADDR: MAC address of the reported |
| 3369 |
* peer. |
| 3370 |
* @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_STATUS: Status of measurement |
| 3371 |
* request for this peer. |
| 3372 |
* See enum qca_wlan_vendor_attr_ftm_peer_result_status. |
| 3373 |
* @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_FLAGS: Various flags related |
| 3374 |
* to measurement results for this peer. |
| 3375 |
* See enum qca_wlan_vendor_attr_ftm_peer_result_flags. |
| 3376 |
* @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_VALUE_SECONDS: Specified when |
| 3377 |
* request failed and peer requested not to send an additional request |
| 3378 |
* for this number of seconds. |
| 3379 |
* @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_LCI: LCI report when received |
| 3380 |
* from peer. In the format specified by IEEE P802.11-REVmc/D7.0, |
| 3381 |
* 9.4.2.22.10. |
| 3382 |
* @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_LCR: Location civic report when |
| 3383 |
* received from peer. In the format specified by IEEE P802.11-REVmc/D7.0, |
| 3384 |
* 9.4.2.22.13. |
| 3385 |
* @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_MEAS_PARAMS: Reported when peer |
| 3386 |
* overridden some measurement request parameters. See |
| 3387 |
* enum qca_wlan_vendor_attr_ftm_meas_param. |
| 3388 |
* @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_AOA_MEAS: AOA measurement |
| 3389 |
* for this peer. Same contents as @QCA_WLAN_VENDOR_ATTR_AOA_MEAS_RESULT. |
| 3390 |
* @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_MEAS: Array of measurement |
| 3391 |
* results. Each entry is a nested attribute defined |
| 3392 |
* by enum qca_wlan_vendor_attr_ftm_meas. |
| 3393 |
*/ |
| 3394 |
enum qca_wlan_vendor_attr_ftm_peer_result { |
| 3395 |
QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_INVALID, |
| 3396 |
QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_MAC_ADDR, |
| 3397 |
QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_STATUS, |
| 3398 |
QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_FLAGS, |
| 3399 |
QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_VALUE_SECONDS, |
| 3400 |
QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_LCI, |
| 3401 |
QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_LCR, |
| 3402 |
QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_MEAS_PARAMS, |
| 3403 |
QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_AOA_MEAS, |
| 3404 |
QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_MEAS, |
| 3405 |
/* keep last */ |
| 3406 |
QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_AFTER_LAST, |
| 3407 |
QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_MAX = |
| 3408 |
QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_AFTER_LAST - 1, |
| 3409 |
}; |
| 3410 |
|
| 3411 |
/** |
| 3412 |
* enum qca_wlan_vendor_attr_ftm_peer_result_status |
| 3413 |
* |
| 3414 |
* @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_STATUS_OK: Request sent ok and results |
| 3415 |
* will be provided. Peer may have overridden some measurement parameters, |
| 3416 |
* in which case overridden parameters will be report by |
| 3417 |
* QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_MEAS_PARAM attribute. |
| 3418 |
* @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_STATUS_INCAPABLE: Peer is incapable |
| 3419 |
* of performing the measurement request. No more results will be sent |
| 3420 |
* for this peer in this session. |
| 3421 |
* @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_STATUS_FAILED: Peer reported request |
| 3422 |
* failed, and requested not to send an additional request for number |
| 3423 |
* of seconds specified by QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_VALUE_SECONDS |
| 3424 |
* attribute. |
| 3425 |
* @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_STATUS_INVALID: Request validation |
| 3426 |
* failed. Request was not sent over the air. |
| 3427 |
*/ |
| 3428 |
enum qca_wlan_vendor_attr_ftm_peer_result_status { |
| 3429 |
QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_STATUS_OK, |
| 3430 |
QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_STATUS_INCAPABLE, |
| 3431 |
QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_STATUS_FAILED, |
| 3432 |
QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_STATUS_INVALID, |
| 3433 |
}; |
| 3434 |
|
| 3435 |
/** |
| 3436 |
* enum qca_wlan_vendor_attr_ftm_peer_result_flags: Various flags |
| 3437 |
* for measurement result, per-peer |
| 3438 |
* |
| 3439 |
* @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_FLAG_DONE: If set, |
| 3440 |
* measurement completed for this peer. No more results will be reported |
| 3441 |
* for this peer in this session. |
| 3442 |
*/ |
| 3443 |
enum qca_wlan_vendor_attr_ftm_peer_result_flags { |
| 3444 |
QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_FLAG_DONE = 1 << 0, |
| 3445 |
}; |
| 3446 |
|
| 3447 |
/** |
| 3448 |
* enum qca_vendor_attr_loc_session_status: Session completion status code |
| 3449 |
* |
| 3450 |
* @QCA_WLAN_VENDOR_ATTR_LOC_SESSION_STATUS_OK: Session completed |
| 3451 |
* successfully. |
| 3452 |
* @QCA_WLAN_VENDOR_ATTR_LOC_SESSION_STATUS_ABORTED: Session aborted |
| 3453 |
* by request. |
| 3454 |
* @QCA_WLAN_VENDOR_ATTR_LOC_SESSION_STATUS_INVALID: Session request |
| 3455 |
* was invalid and was not started. |
| 3456 |
* @QCA_WLAN_VENDOR_ATTR_LOC_SESSION_STATUS_FAILED: Session had an error |
| 3457 |
* and did not complete normally (for example out of resources). |
| 3458 |
*/ |
| 3459 |
enum qca_vendor_attr_loc_session_status { |
| 3460 |
QCA_WLAN_VENDOR_ATTR_LOC_SESSION_STATUS_OK, |
| 3461 |
QCA_WLAN_VENDOR_ATTR_LOC_SESSION_STATUS_ABORTED, |
| 3462 |
QCA_WLAN_VENDOR_ATTR_LOC_SESSION_STATUS_INVALID, |
| 3463 |
QCA_WLAN_VENDOR_ATTR_LOC_SESSION_STATUS_FAILED, |
| 3464 |
}; |
| 3465 |
|
| 3466 |
/** |
| 3467 |
* enum qca_wlan_vendor_attr_ftm_meas: Single measurement data |
| 3468 |
* |
| 3469 |
* @QCA_WLAN_VENDOR_ATTR_FTM_MEAS_T1: Time of departure (TOD) of FTM packet as |
| 3470 |
* recorded by responder, in picoseconds. |
| 3471 |
* See IEEE P802.11-REVmc/D7.0, 11.24.6.4 for more information. |
| 3472 |
* @QCA_WLAN_VENDOR_ATTR_FTM_MEAS_T2: Time of arrival (TOA) of FTM packet at |
| 3473 |
* initiator, in picoseconds. |
| 3474 |
* See IEEE P802.11-REVmc/D7.0, 11.24.6.4 for more information. |
| 3475 |
* @QCA_WLAN_VENDOR_ATTR_FTM_MEAS_T3: TOD of ACK packet as recorded by |
| 3476 |
* initiator, in picoseconds. |
| 3477 |
* See IEEE P802.11-REVmc/D7.0, 11.24.6.4 for more information. |
| 3478 |
* @QCA_WLAN_VENDOR_ATTR_FTM_MEAS_T4: TOA of ACK packet at |
| 3479 |
* responder, in picoseconds. |
| 3480 |
* See IEEE P802.11-REVmc/D7.0, 11.24.6.4 for more information. |
| 3481 |
* @QCA_WLAN_VENDOR_ATTR_FTM_MEAS_RSSI: RSSI (signal level) as recorded |
| 3482 |
* during this measurement exchange. Optional and will be provided if |
| 3483 |
* the hardware can measure it. |
| 3484 |
* @QCA_WLAN_VENDOR_ATTR_FTM_MEAS_TOD_ERR: TOD error reported by |
| 3485 |
* responder. Not always provided. |
| 3486 |
* See IEEE P802.11-REVmc/D7.0, 9.6.8.33 for more information. |
| 3487 |
* @QCA_WLAN_VENDOR_ATTR_FTM_MEAS_TOA_ERR: TOA error reported by |
| 3488 |
* responder. Not always provided. |
| 3489 |
* See IEEE P802.11-REVmc/D7.0, 9.6.8.33 for more information. |
| 3490 |
* @QCA_WLAN_VENDOR_ATTR_FTM_MEAS_INITIATOR_TOD_ERR: TOD error measured by |
| 3491 |
* initiator. Not always provided. |
| 3492 |
* See IEEE P802.11-REVmc/D7.0, 9.6.8.33 for more information. |
| 3493 |
* @QCA_WLAN_VENDOR_ATTR_FTM_MEAS_INITIATOR_TOA_ERR: TOA error measured by |
| 3494 |
* initiator. Not always provided. |
| 3495 |
* See IEEE P802.11-REVmc/D7.0, 9.6.8.33 for more information. |
| 3496 |
* @QCA_WLAN_VENDOR_ATTR_FTM_MEAS_PAD: Dummy attribute for padding. |
| 3497 |
*/ |
| 3498 |
enum qca_wlan_vendor_attr_ftm_meas { |
| 3499 |
QCA_WLAN_VENDOR_ATTR_FTM_MEAS_INVALID, |
| 3500 |
QCA_WLAN_VENDOR_ATTR_FTM_MEAS_T1, |
| 3501 |
QCA_WLAN_VENDOR_ATTR_FTM_MEAS_T2, |
| 3502 |
QCA_WLAN_VENDOR_ATTR_FTM_MEAS_T3, |
| 3503 |
QCA_WLAN_VENDOR_ATTR_FTM_MEAS_T4, |
| 3504 |
QCA_WLAN_VENDOR_ATTR_FTM_MEAS_RSSI, |
| 3505 |
QCA_WLAN_VENDOR_ATTR_FTM_MEAS_TOD_ERR, |
| 3506 |
QCA_WLAN_VENDOR_ATTR_FTM_MEAS_TOA_ERR, |
| 3507 |
QCA_WLAN_VENDOR_ATTR_FTM_MEAS_INITIATOR_TOD_ERR, |
| 3508 |
QCA_WLAN_VENDOR_ATTR_FTM_MEAS_INITIATOR_TOA_ERR, |
| 3509 |
QCA_WLAN_VENDOR_ATTR_FTM_MEAS_PAD, |
| 3510 |
/* keep last */ |
| 3511 |
QCA_WLAN_VENDOR_ATTR_FTM_MEAS_AFTER_LAST, |
| 3512 |
QCA_WLAN_VENDOR_ATTR_FTM_MEAS_MAX = |
| 3513 |
QCA_WLAN_VENDOR_ATTR_FTM_MEAS_AFTER_LAST - 1, |
| 3514 |
}; |
| 3515 |
|
| 3516 |
/** |
| 3517 |
* enum qca_wlan_vendor_attr_aoa_type - AOA measurement type |
| 3518 |
* |
| 3519 |
* @QCA_WLAN_VENDOR_ATTR_AOA_TYPE_TOP_CIR_PHASE: Phase of the strongest |
| 3520 |
* CIR (channel impulse response) path for each antenna. |
| 3521 |
* @QCA_WLAN_VENDOR_ATTR_AOA_TYPE_TOP_CIR_PHASE_AMP: Phase and amplitude |
| 3522 |
* of the strongest CIR path for each antenna. |
| 3523 |
*/ |
| 3524 |
enum qca_wlan_vendor_attr_aoa_type { |
| 3525 |
QCA_WLAN_VENDOR_ATTR_AOA_TYPE_TOP_CIR_PHASE, |
| 3526 |
QCA_WLAN_VENDOR_ATTR_AOA_TYPE_TOP_CIR_PHASE_AMP, |
| 3527 |
QCA_WLAN_VENDOR_ATTR_AOA_TYPE_MAX |
| 3528 |
}; |
| 3529 |
|
| 3530 |
/** |
| 3531 |
* enum qca_wlan_vendor_attr_encryption_test - Attributes to |
| 3532 |
* validate encryption engine |
| 3533 |
* |
| 3534 |
* @QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_NEEDS_DECRYPTION: Flag attribute. |
| 3535 |
* This will be included if the request is for decryption; if not included, |
| 3536 |
* the request is treated as a request for encryption by default. |
| 3537 |
* @QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_CIPHER: Unsigned 32-bit value |
| 3538 |
* indicating the key cipher suite. Takes same values as |
| 3539 |
* NL80211_ATTR_KEY_CIPHER. |
| 3540 |
* @QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_KEYID: Unsigned 8-bit value |
| 3541 |
* Key Id to be used for encryption |
| 3542 |
* @QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_TK: Array of 8-bit values. |
| 3543 |
* Key (TK) to be used for encryption/decryption |
| 3544 |
* @QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_PN: Array of 8-bit values. |
| 3545 |
* Packet number to be specified for encryption/decryption |
| 3546 |
* 6 bytes for TKIP/CCMP/GCMP. |
| 3547 |
* @QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_DATA: Array of 8-bit values |
| 3548 |
* representing the 802.11 packet (header + payload + FCS) that |
| 3549 |
* needs to be encrypted/decrypted. |
| 3550 |
* Encrypted/decrypted response from the driver will also be sent |
| 3551 |
* to userspace with the same attribute. |
| 3552 |
*/ |
| 3553 |
enum qca_wlan_vendor_attr_encryption_test { |
| 3554 |
QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_INVALID = 0, |
| 3555 |
QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_NEEDS_DECRYPTION, |
| 3556 |
QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_CIPHER, |
| 3557 |
QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_KEYID, |
| 3558 |
QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_TK, |
| 3559 |
QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_PN, |
| 3560 |
QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_DATA, |
| 3561 |
|
| 3562 |
/* keep last */ |
| 3563 |
QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_AFTER_LAST, |
| 3564 |
QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_MAX = |
| 3565 |
QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_AFTER_LAST - 1 |
| 3566 |
}; |
| 3567 |
|
| 3568 |
/** |
| 3569 |
* enum qca_wlan_vendor_attr_dmg_rf_sector_type - Type of |
| 3570 |
* sector for DMG RF sector operations. |
| 3571 |
* |
| 3572 |
* @QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_TYPE_RX: RX sector |
| 3573 |
* @QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_TYPE_TX: TX sector |
| 3574 |
*/ |
| 3575 |
enum qca_wlan_vendor_attr_dmg_rf_sector_type { |
| 3576 |
QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_TYPE_RX, |
| 3577 |
QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_TYPE_TX, |
| 3578 |
QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_TYPE_MAX |
| 3579 |
}; |
| 3580 |
|
| 3581 |
/** |
| 3582 |
* enum qca_wlan_vendor_attr_fw_state - State of firmware |
| 3583 |
* |
| 3584 |
* @QCA_WLAN_VENDOR_ATTR_FW_STATE_ERROR: FW is in bad state |
| 3585 |
* @QCA_WLAN_VENDOR_ATTR_FW_STATE_ACTIVE: FW is active |
| 3586 |
*/ |
| 3587 |
enum qca_wlan_vendor_attr_fw_state { |
| 3588 |
QCA_WLAN_VENDOR_ATTR_FW_STATE_ERROR, |
| 3589 |
QCA_WLAN_VENDOR_ATTR_FW_STATE_ACTIVE, |
| 3590 |
QCA_WLAN_VENDOR_ATTR_FW_STATE_MAX |
| 3591 |
}; |
| 3592 |
|
| 3593 |
/** |
| 3594 |
* BRP antenna limit mode |
| 3595 |
* |
| 3596 |
* @QCA_WLAN_VENDOR_ATTR_BRP_ANT_LIMIT_MODE_DISABLE: Disable BRP force |
| 3597 |
* antenna limit, BRP will be performed as usual. |
| 3598 |
* @QCA_WLAN_VENDOR_ATTR_BRP_ANT_LIMIT_MODE_EFFECTIVE: Define maximal |
| 3599 |
* antennas limit. the hardware may use less antennas than the |
| 3600 |
* maximum limit. |
| 3601 |
* @QCA_WLAN_VENDOR_ATTR_BRP_ANT_LIMIT_MODE_FORCE: The hardware will |
| 3602 |
* use exactly the specified number of antennas for BRP. |
| 3603 |
*/ |
| 3604 |
enum qca_wlan_vendor_attr_brp_ant_limit_mode { |
| 3605 |
QCA_WLAN_VENDOR_ATTR_BRP_ANT_LIMIT_MODE_DISABLE, |
| 3606 |
QCA_WLAN_VENDOR_ATTR_BRP_ANT_LIMIT_MODE_EFFECTIVE, |
| 3607 |
QCA_WLAN_VENDOR_ATTR_BRP_ANT_LIMIT_MODE_FORCE, |
| 3608 |
QCA_WLAN_VENDOR_ATTR_BRP_ANT_LIMIT_MODE_MAX |
| 3609 |
}; |
| 3610 |
|
| 3611 |
/** |
| 3612 |
* enum qca_wlan_vendor_attr_dmg_rf_sector_cfg - Attributes for |
| 3613 |
* DMG RF sector configuration for a single RF module. |
| 3614 |
* The values are defined in a compact way which closely matches |
| 3615 |
* the way it is stored in HW registers. |
| 3616 |
* The configuration provides values for 32 antennas and 8 distribution |
| 3617 |
* amplifiers, and together describes the characteristics of the RF |
| 3618 |
* sector - such as a beam in some direction with some gain. |
| 3619 |
* |
| 3620 |
* @QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_MODULE_INDEX: Index |
| 3621 |
* of RF module for this configuration. |
| 3622 |
* @QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_ETYPE0: Bit 0 of edge |
| 3623 |
* amplifier gain index. Unsigned 32 bit number containing |
| 3624 |
* bits for all 32 antennas. |
| 3625 |
* @QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_ETYPE1: Bit 1 of edge |
| 3626 |
* amplifier gain index. Unsigned 32 bit number containing |
| 3627 |
* bits for all 32 antennas. |
| 3628 |
* @QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_ETYPE2: Bit 2 of edge |
| 3629 |
* amplifier gain index. Unsigned 32 bit number containing |
| 3630 |
* bits for all 32 antennas. |
| 3631 |
* @QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_PSH_HI: Phase values |
| 3632 |
* for first 16 antennas, 2 bits per antenna. |
| 3633 |
* @QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_PSH_LO: Phase values |
| 3634 |
* for last 16 antennas, 2 bits per antenna. |
| 3635 |
* @QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_DTYPE_X16: Contains |
| 3636 |
* DTYPE values (3 bits) for each distribution amplifier, followed |
| 3637 |
* by X16 switch bits for each distribution amplifier. There are |
| 3638 |
* total of 8 distribution amplifiers. |
| 3639 |
*/ |
| 3640 |
enum qca_wlan_vendor_attr_dmg_rf_sector_cfg { |
| 3641 |
QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_INVALID = 0, |
| 3642 |
QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_MODULE_INDEX = 1, |
| 3643 |
QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_ETYPE0 = 2, |
| 3644 |
QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_ETYPE1 = 3, |
| 3645 |
QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_ETYPE2 = 4, |
| 3646 |
QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_PSH_HI = 5, |
| 3647 |
QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_PSH_LO = 6, |
| 3648 |
QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_DTYPE_X16 = 7, |
| 3649 |
|
| 3650 |
/* keep last */ |
| 3651 |
QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_AFTER_LAST, |
| 3652 |
QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_MAX = |
| 3653 |
QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_AFTER_LAST - 1 |
| 3654 |
}; |
| 3655 |
|
| 3656 |
enum qca_wlan_vendor_attr_ll_stats_set { |
| 3657 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_SET_INVALID = 0, |
| 3658 |
/* Unsigned 32-bit value */ |
| 3659 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_SET_CONFIG_MPDU_SIZE_THRESHOLD = 1, |
| 3660 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_SET_CONFIG_AGGRESSIVE_STATS_GATHERING = 2, |
| 3661 |
/* keep last */ |
| 3662 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_SET_AFTER_LAST, |
| 3663 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_SET_MAX = |
| 3664 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_SET_AFTER_LAST - 1, |
| 3665 |
}; |
| 3666 |
|
| 3667 |
enum qca_wlan_vendor_attr_ll_stats_clr { |
| 3668 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_CLR_INVALID = 0, |
| 3669 |
/* Unsigned 32bit bitmap for clearing statistics |
| 3670 |
* All radio statistics 0x00000001 |
| 3671 |
* cca_busy_time (within radio statistics) 0x00000002 |
| 3672 |
* All channel stats (within radio statistics) 0x00000004 |
| 3673 |
* All scan statistics (within radio statistics) 0x00000008 |
| 3674 |
* All interface statistics 0x00000010 |
| 3675 |
* All tx rate statistics (within interface statistics) 0x00000020 |
| 3676 |
* All ac statistics (with in interface statistics) 0x00000040 |
| 3677 |
* All contention (min, max, avg) statistics (within ac statisctics) |
| 3678 |
* 0x00000080. |
| 3679 |
*/ |
| 3680 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_CLR_CONFIG_REQ_MASK = 1, |
| 3681 |
/* Unsigned 8 bit value: Request to stop statistics collection */ |
| 3682 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_CLR_CONFIG_STOP_REQ = 2, |
| 3683 |
|
| 3684 |
/* Unsigned 32 bit bitmap: Response from the driver |
| 3685 |
* for the cleared statistics |
| 3686 |
*/ |
| 3687 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_CLR_CONFIG_RSP_MASK = 3, |
| 3688 |
/* Unsigned 8 bit value: Response from driver/firmware |
| 3689 |
* for the stop request |
| 3690 |
*/ |
| 3691 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_CLR_CONFIG_STOP_RSP = 4, |
| 3692 |
/* keep last */ |
| 3693 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_CLR_AFTER_LAST, |
| 3694 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_CLR_MAX = |
| 3695 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_CLR_AFTER_LAST - 1, |
| 3696 |
}; |
| 3697 |
|
| 3698 |
enum qca_wlan_vendor_attr_ll_stats_get { |
| 3699 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_GET_INVALID = 0, |
| 3700 |
/* Unsigned 32 bit value provided by the caller issuing the GET stats |
| 3701 |
* command. When reporting the stats results, the driver uses the same |
| 3702 |
* value to indicate which GET request the results correspond to. |
| 3703 |
*/ |
| 3704 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_GET_CONFIG_REQ_ID = 1, |
| 3705 |
/* Unsigned 32 bit value - bit mask to identify what statistics are |
| 3706 |
* requested for retrieval. |
| 3707 |
* Radio Statistics 0x00000001 |
| 3708 |
* Interface Statistics 0x00000020 |
| 3709 |
* All Peer Statistics 0x00000040 |
| 3710 |
* Peer Statistics 0x00000080 |
| 3711 |
*/ |
| 3712 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_GET_CONFIG_REQ_MASK = 2, |
| 3713 |
/* keep last */ |
| 3714 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_GET_AFTER_LAST, |
| 3715 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_GET_MAX = |
| 3716 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_GET_AFTER_LAST - 1, |
| 3717 |
}; |
| 3718 |
|
| 3719 |
enum qca_wlan_vendor_attr_ll_stats_results { |
| 3720 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_INVALID = 0, |
| 3721 |
/* Unsigned 32bit value. Used by the driver; must match the request id |
| 3722 |
* provided with the QCA_NL80211_VENDOR_SUBCMD_LL_STATS_GET command. |
| 3723 |
*/ |
| 3724 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_RESULTS_REQ_ID = 1, |
| 3725 |
|
| 3726 |
/* Unsigned 32 bit value */ |
| 3727 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_BEACON_RX = 2, |
| 3728 |
/* Unsigned 32 bit value */ |
| 3729 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_MGMT_RX = 3, |
| 3730 |
/* Unsigned 32 bit value */ |
| 3731 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_MGMT_ACTION_RX = 4, |
| 3732 |
/* Unsigned 32 bit value */ |
| 3733 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_MGMT_ACTION_TX = 5, |
| 3734 |
/* Signed 32 bit value */ |
| 3735 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_RSSI_MGMT = 6, |
| 3736 |
/* Signed 32 bit value */ |
| 3737 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_RSSI_DATA = 7, |
| 3738 |
/* Signed 32 bit value */ |
| 3739 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_RSSI_ACK = 8, |
| 3740 |
|
| 3741 |
/* Attributes of type QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_INFO_* are |
| 3742 |
* nested within the interface stats. |
| 3743 |
*/ |
| 3744 |
|
| 3745 |
/* Interface mode, e.g., STA, SOFTAP, IBSS, etc. |
| 3746 |
* Type = enum wifi_interface_mode. |
| 3747 |
*/ |
| 3748 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_INFO_MODE = 9, |
| 3749 |
/* Interface MAC address. An array of 6 Unsigned int8 */ |
| 3750 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_INFO_MAC_ADDR = 10, |
| 3751 |
/* Type = enum wifi_connection_state, e.g., DISCONNECTED, |
| 3752 |
* AUTHENTICATING, etc. valid for STA, CLI only. |
| 3753 |
*/ |
| 3754 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_INFO_STATE = 11, |
| 3755 |
/* Type = enum wifi_roam_state. Roaming state, e.g., IDLE or ACTIVE |
| 3756 |
*/ |
| 3757 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_INFO_ROAMING = 12, |
| 3758 |
/* Unsigned 32 bit value. WIFI_CAPABILITY_XXX */ |
| 3759 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_INFO_CAPABILITIES = 13, |
| 3760 |
/* NULL terminated SSID. An array of 33 Unsigned 8bit values */ |
| 3761 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_INFO_SSID = 14, |
| 3762 |
/* BSSID. An array of 6 unsigned 8 bit values */ |
| 3763 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_INFO_BSSID = 15, |
| 3764 |
/* Country string advertised by AP. An array of 3 unsigned 8 bit |
| 3765 |
* values. |
| 3766 |
*/ |
| 3767 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_INFO_AP_COUNTRY_STR = 16, |
| 3768 |
/* Country string for this association. An array of 3 unsigned 8 bit |
| 3769 |
* values. |
| 3770 |
*/ |
| 3771 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_INFO_COUNTRY_STR = 17, |
| 3772 |
|
| 3773 |
/* Attributes of type QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_* could |
| 3774 |
* be nested within the interface stats. |
| 3775 |
*/ |
| 3776 |
|
| 3777 |
/* Type = enum wifi_traffic_ac, e.g., V0, VI, BE and BK */ |
| 3778 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_AC = 18, |
| 3779 |
/* Unsigned int 32 value corresponding to respective AC */ |
| 3780 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_TX_MPDU = 19, |
| 3781 |
/* Unsigned int 32 value corresponding to respective AC */ |
| 3782 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_RX_MPDU = 20, |
| 3783 |
/* Unsigned int 32 value corresponding to respective AC */ |
| 3784 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_TX_MCAST = 21, |
| 3785 |
/* Unsigned int 32 value corresponding to respective AC */ |
| 3786 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_RX_MCAST = 22, |
| 3787 |
/* Unsigned int 32 value corresponding to respective AC */ |
| 3788 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_RX_AMPDU = 23, |
| 3789 |
/* Unsigned int 32 value corresponding to respective AC */ |
| 3790 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_TX_AMPDU = 24, |
| 3791 |
/* Unsigned int 32 value corresponding to respective AC */ |
| 3792 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_MPDU_LOST = 25, |
| 3793 |
/* Unsigned int 32 value corresponding to respective AC */ |
| 3794 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_RETRIES = 26, |
| 3795 |
/* Unsigned int 32 value corresponding to respective AC */ |
| 3796 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_RETRIES_SHORT = 27, |
| 3797 |
/* Unsigned int 32 values corresponding to respective AC */ |
| 3798 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_RETRIES_LONG = 28, |
| 3799 |
/* Unsigned int 32 values corresponding to respective AC */ |
| 3800 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_CONTENTION_TIME_MIN = 29, |
| 3801 |
/* Unsigned int 32 values corresponding to respective AC */ |
| 3802 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_CONTENTION_TIME_MAX = 30, |
| 3803 |
/* Unsigned int 32 values corresponding to respective AC */ |
| 3804 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_CONTENTION_TIME_AVG = 31, |
| 3805 |
/* Unsigned int 32 values corresponding to respective AC */ |
| 3806 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_CONTENTION_NUM_SAMPLES = 32, |
| 3807 |
/* Unsigned 32 bit value. Number of peers */ |
| 3808 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_NUM_PEERS = 33, |
| 3809 |
|
| 3810 |
/* Attributes of type QCA_WLAN_VENDOR_ATTR_LL_STATS_PEER_INFO_* are |
| 3811 |
* nested within the interface stats. |
| 3812 |
*/ |
| 3813 |
|
| 3814 |
/* Type = enum wifi_peer_type. Peer type, e.g., STA, AP, P2P GO etc. */ |
| 3815 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_PEER_INFO_TYPE = 34, |
| 3816 |
/* MAC addr corresponding to respective peer. An array of 6 unsigned |
| 3817 |
* 8 bit values. |
| 3818 |
*/ |
| 3819 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_PEER_INFO_MAC_ADDRESS = 35, |
| 3820 |
/* Unsigned int 32 bit value representing capabilities corresponding |
| 3821 |
* to respective peer. |
| 3822 |
*/ |
| 3823 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_PEER_INFO_CAPABILITIES = 36, |
| 3824 |
/* Unsigned 32 bit value. Number of rates */ |
| 3825 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_PEER_INFO_NUM_RATES = 37, |
| 3826 |
|
| 3827 |
/* Attributes of type QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_* |
| 3828 |
* are nested within the rate stat. |
| 3829 |
*/ |
| 3830 |
|
| 3831 |
/* Wi-Fi Rate - separate attributes defined for individual fields */ |
| 3832 |
|
| 3833 |
/* Unsigned int 8 bit value; 0: OFDM, 1:CCK, 2:HT 3:VHT 4..7 reserved */ |
| 3834 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_PREAMBLE = 38, |
| 3835 |
/* Unsigned int 8 bit value; 0:1x1, 1:2x2, 3:3x3, 4:4x4 */ |
| 3836 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_NSS = 39, |
| 3837 |
/* Unsigned int 8 bit value; 0:20 MHz, 1:40 MHz, 2:80 MHz, 3:160 MHz */ |
| 3838 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_BW = 40, |
| 3839 |
/* Unsigned int 8 bit value; OFDM/CCK rate code would be as per IEEE Std |
| 3840 |
* in the units of 0.5 Mbps HT/VHT it would be MCS index |
| 3841 |
*/ |
| 3842 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_MCS_INDEX = 41, |
| 3843 |
|
| 3844 |
/* Unsigned 32 bit value. Bit rate in units of 100 kbps */ |
| 3845 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_BIT_RATE = 42, |
| 3846 |
|
| 3847 |
/* Attributes of type QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_STAT_* could be |
| 3848 |
* nested within the peer info stats. |
| 3849 |
*/ |
| 3850 |
|
| 3851 |
/* Unsigned int 32 bit value. Number of successfully transmitted data |
| 3852 |
* packets, i.e., with ACK received corresponding to the respective |
| 3853 |
* rate. |
| 3854 |
*/ |
| 3855 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_TX_MPDU = 43, |
| 3856 |
/* Unsigned int 32 bit value. Number of received data packets |
| 3857 |
* corresponding to the respective rate. |
| 3858 |
*/ |
| 3859 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_RX_MPDU = 44, |
| 3860 |
/* Unsigned int 32 bit value. Number of data packet losses, i.e., no ACK |
| 3861 |
* received corresponding to the respective rate. |
| 3862 |
*/ |
| 3863 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_MPDU_LOST = 45, |
| 3864 |
/* Unsigned int 32 bit value. Total number of data packet retries for |
| 3865 |
* the respective rate. |
| 3866 |
*/ |
| 3867 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_RETRIES = 46, |
| 3868 |
/* Unsigned int 32 bit value. Total number of short data packet retries |
| 3869 |
* for the respective rate. |
| 3870 |
*/ |
| 3871 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_RETRIES_SHORT = 47, |
| 3872 |
/* Unsigned int 32 bit value. Total number of long data packet retries |
| 3873 |
* for the respective rate. |
| 3874 |
*/ |
| 3875 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_RETRIES_LONG = 48, |
| 3876 |
|
| 3877 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_ID = 49, |
| 3878 |
/* Unsigned 32 bit value. Total number of msecs the radio is awake |
| 3879 |
* accruing over time. |
| 3880 |
*/ |
| 3881 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_ON_TIME = 50, |
| 3882 |
/* Unsigned 32 bit value. Total number of msecs the radio is |
| 3883 |
* transmitting accruing over time. |
| 3884 |
*/ |
| 3885 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_TX_TIME = 51, |
| 3886 |
/* Unsigned 32 bit value. Total number of msecs the radio is in active |
| 3887 |
* receive accruing over time. |
| 3888 |
*/ |
| 3889 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_RX_TIME = 52, |
| 3890 |
/* Unsigned 32 bit value. Total number of msecs the radio is awake due |
| 3891 |
* to all scan accruing over time. |
| 3892 |
*/ |
| 3893 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_ON_TIME_SCAN = 53, |
| 3894 |
/* Unsigned 32 bit value. Total number of msecs the radio is awake due |
| 3895 |
* to NAN accruing over time. |
| 3896 |
*/ |
| 3897 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_ON_TIME_NBD = 54, |
| 3898 |
/* Unsigned 32 bit value. Total number of msecs the radio is awake due |
| 3899 |
* to GSCAN accruing over time. |
| 3900 |
*/ |
| 3901 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_ON_TIME_GSCAN = 55, |
| 3902 |
/* Unsigned 32 bit value. Total number of msecs the radio is awake due |
| 3903 |
* to roam scan accruing over time. |
| 3904 |
*/ |
| 3905 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_ON_TIME_ROAM_SCAN = 56, |
| 3906 |
/* Unsigned 32 bit value. Total number of msecs the radio is awake due |
| 3907 |
* to PNO scan accruing over time. |
| 3908 |
*/ |
| 3909 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_ON_TIME_PNO_SCAN = 57, |
| 3910 |
/* Unsigned 32 bit value. Total number of msecs the radio is awake due |
| 3911 |
* to Hotspot 2.0 scans and GAS exchange accruing over time. |
| 3912 |
*/ |
| 3913 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_ON_TIME_HS20 = 58, |
| 3914 |
/* Unsigned 32 bit value. Number of channels. */ |
| 3915 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_NUM_CHANNELS = 59, |
| 3916 |
|
| 3917 |
/* Attributes of type QCA_WLAN_VENDOR_ATTR_LL_STATS_CHANNEL_INFO_* could |
| 3918 |
* be nested within the channel stats. |
| 3919 |
*/ |
| 3920 |
|
| 3921 |
/* Type = enum wifi_channel_width. Channel width, e.g., 20, 40, 80 */ |
| 3922 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_CHANNEL_INFO_WIDTH = 60, |
| 3923 |
/* Unsigned 32 bit value. Primary 20 MHz channel. */ |
| 3924 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_CHANNEL_INFO_CENTER_FREQ = 61, |
| 3925 |
/* Unsigned 32 bit value. Center frequency (MHz) first segment. */ |
| 3926 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_CHANNEL_INFO_CENTER_FREQ0 = 62, |
| 3927 |
/* Unsigned 32 bit value. Center frequency (MHz) second segment. */ |
| 3928 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_CHANNEL_INFO_CENTER_FREQ1 = 63, |
| 3929 |
|
| 3930 |
/* Attributes of type QCA_WLAN_VENDOR_ATTR_LL_STATS_CHANNEL_* could be |
| 3931 |
* nested within the radio stats. |
| 3932 |
*/ |
| 3933 |
|
| 3934 |
/* Unsigned int 32 bit value representing total number of msecs the |
| 3935 |
* radio is awake on that channel accruing over time, corresponding to |
| 3936 |
* the respective channel. |
| 3937 |
*/ |
| 3938 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_CHANNEL_ON_TIME = 64, |
| 3939 |
/* Unsigned int 32 bit value representing total number of msecs the CCA |
| 3940 |
* register is busy accruing over time corresponding to the respective |
| 3941 |
* channel. |
| 3942 |
*/ |
| 3943 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_CHANNEL_CCA_BUSY_TIME = 65, |
| 3944 |
|
| 3945 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_NUM_RADIOS = 66, |
| 3946 |
|
| 3947 |
/* Signifies the nested list of channel attributes |
| 3948 |
* QCA_WLAN_VENDOR_ATTR_LL_STATS_CHANNEL_* |
| 3949 |
*/ |
| 3950 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_CH_INFO = 67, |
| 3951 |
|
| 3952 |
/* Signifies the nested list of peer info attributes |
| 3953 |
* QCA_WLAN_VENDOR_ATTR_LL_STATS_PEER_INFO_* |
| 3954 |
*/ |
| 3955 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_PEER_INFO = 68, |
| 3956 |
|
| 3957 |
/* Signifies the nested list of rate info attributes |
| 3958 |
* QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_* |
| 3959 |
*/ |
| 3960 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_PEER_INFO_RATE_INFO = 69, |
| 3961 |
|
| 3962 |
/* Signifies the nested list of wmm info attributes |
| 3963 |
* QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_* |
| 3964 |
*/ |
| 3965 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_INFO = 70, |
| 3966 |
|
| 3967 |
/* Unsigned 8 bit value. Used by the driver; if set to 1, it indicates |
| 3968 |
* that more stats, e.g., peers or radio, are to follow in the next |
| 3969 |
* QCA_NL80211_VENDOR_SUBCMD_LL_STATS_*_RESULTS event. |
| 3970 |
* Otherwise, it is set to 0. |
| 3971 |
*/ |
| 3972 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_RESULTS_MORE_DATA = 71, |
| 3973 |
|
| 3974 |
/* Unsigned 64 bit value */ |
| 3975 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_AVERAGE_TSF_OFFSET = 72, |
| 3976 |
|
| 3977 |
/* Unsigned 32 bit value */ |
| 3978 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_LEAKY_AP_DETECTED = 73, |
| 3979 |
|
| 3980 |
/* Unsigned 32 bit value */ |
| 3981 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_LEAKY_AP_AVG_NUM_FRAMES_LEAKED = 74, |
| 3982 |
|
| 3983 |
/* Unsigned 32 bit value */ |
| 3984 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_LEAKY_AP_GUARD_TIME = 75, |
| 3985 |
|
| 3986 |
/* Unsigned 32 bit value */ |
| 3987 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_TYPE = 76, |
| 3988 |
|
| 3989 |
/* Unsigned 32 bit value */ |
| 3990 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_NUM_TX_LEVELS = 77, |
| 3991 |
|
| 3992 |
/* Number of msecs the radio spent in transmitting for each power level |
| 3993 |
*/ |
| 3994 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_TX_TIME_PER_LEVEL = 78, |
| 3995 |
|
| 3996 |
/* Unsigned 32 bit value */ |
| 3997 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_RTS_SUCC_CNT = 79, |
| 3998 |
/* Unsigned 32 bit value */ |
| 3999 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_RTS_FAIL_CNT = 80, |
| 4000 |
/* Unsigned 32 bit value */ |
| 4001 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_PPDU_SUCC_CNT = 81, |
| 4002 |
/* Unsigned 32 bit value */ |
| 4003 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_PPDU_FAIL_CNT = 82, |
| 4004 |
|
| 4005 |
/* Unsigned int 32 value. |
| 4006 |
* Pending MSDUs corresponding to respective AC. |
| 4007 |
*/ |
| 4008 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_PENDING_MSDU = 83, |
| 4009 |
|
| 4010 |
/* u32 value representing total time in milliseconds for which the radio |
| 4011 |
* is transmitting on this channel. This attribute will be nested |
| 4012 |
* within QCA_WLAN_VENDOR_ATTR_LL_STATS_CH_INFO. |
| 4013 |
*/ |
| 4014 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_CHANNEL_TX_TIME = 84, |
| 4015 |
/* u32 value representing total time in milliseconds for which the radio |
| 4016 |
* is receiving all 802.11 frames intended for this device on this |
| 4017 |
* channel. This attribute will be nested within |
| 4018 |
* QCA_WLAN_VENDOR_ATTR_LL_STATS_CH_INFO. |
| 4019 |
*/ |
| 4020 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_CHANNEL_RX_TIME = 85, |
| 4021 |
/* u8 value representing the channel load percentage. Possible values |
| 4022 |
* are 0-100. |
| 4023 |
*/ |
| 4024 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_CHANNEL_LOAD_PERCENTAGE = 86, |
| 4025 |
/* u8 value representing the time slicing duty cycle percentage. |
| 4026 |
* Possible values are 0-100. |
| 4027 |
*/ |
| 4028 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_INFO_TS_DUTY_CYCLE = 87, |
| 4029 |
/* keep last */ |
| 4030 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_AFTER_LAST, |
| 4031 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_MAX = |
| 4032 |
QCA_WLAN_VENDOR_ATTR_LL_STATS_AFTER_LAST - 1, |
| 4033 |
}; |
| 4034 |
|
| 4035 |
enum qca_wlan_vendor_attr_ll_stats_type { |
| 4036 |
QCA_NL80211_VENDOR_SUBCMD_LL_STATS_TYPE_INVALID = 0, |
| 4037 |
QCA_NL80211_VENDOR_SUBCMD_LL_STATS_TYPE_RADIO = 1, |
| 4038 |
QCA_NL80211_VENDOR_SUBCMD_LL_STATS_TYPE_IFACE = 2, |
| 4039 |
QCA_NL80211_VENDOR_SUBCMD_LL_STATS_TYPE_PEERS = 3, |
| 4040 |
|
| 4041 |
/* keep last */ |
| 4042 |
QCA_NL80211_VENDOR_SUBCMD_LL_STATS_TYPE_AFTER_LAST, |
| 4043 |
QCA_NL80211_VENDOR_SUBCMD_LL_STATS_TYPE_MAX = |
| 4044 |
QCA_NL80211_VENDOR_SUBCMD_LL_STATS_TYPE_AFTER_LAST - 1, |
| 4045 |
}; |
| 4046 |
|
| 4047 |
/** |
| 4048 |
* enum qca_wlan_vendor_attr_tdls_configuration - Attributes for |
| 4049 |
* TDLS configuration to the host driver. |
| 4050 |
* |
| 4051 |
* @QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_TRIGGER_MODE: Configure the TDLS trigger |
| 4052 |
* mode in the host driver. enum qca_wlan_vendor_tdls_trigger_mode |
| 4053 |
* represents the different TDLS trigger modes. |
| 4054 |
* @QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_TX_STATS_PERIOD: Duration (u32) within |
| 4055 |
* which QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_TX_THRESHOLD number |
| 4056 |
* of packets shall meet the criteria for implicit TDLS setup. |
| 4057 |
* @QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_TX_THRESHOLD: Number (u32) of Tx/Rx packets |
| 4058 |
* within a duration QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_TX_STATS_PERIOD |
| 4059 |
* to initiate a TDLS setup. |
| 4060 |
* @QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_DISCOVERY_PERIOD: Time (u32) to initiate |
| 4061 |
* a TDLS Discovery to the peer. |
| 4062 |
* @QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_MAX_DISCOVERY_ATTEMPT: Max number (u32) of |
| 4063 |
* discovery attempts to know the TDLS capability of the peer. A peer is |
| 4064 |
* marked as TDLS not capable if there is no response for all the attempts. |
| 4065 |
* @QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_IDLE_TIMEOUT: Represents a duration (u32) |
| 4066 |
* within which QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_IDLE_PACKET_THRESHOLD |
| 4067 |
* number of TX / RX frames meet the criteria for TDLS teardown. |
| 4068 |
* @QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_IDLE_PACKET_THRESHOLD: Minimum number (u32) |
| 4069 |
* of Tx/Rx packets within a duration |
| 4070 |
* QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_IDLE_TIMEOUT to tear down a TDLS link. |
| 4071 |
* @QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_SETUP_RSSI_THRESHOLD: Threshold |
| 4072 |
* corresponding to the RSSI of the peer below which a TDLS setup is |
| 4073 |
* triggered. |
| 4074 |
* @QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_TEARDOWN_RSSI_THRESHOLD: Threshold |
| 4075 |
* corresponding to the RSSI of the peer above which a TDLS teardown is |
| 4076 |
* triggered. |
| 4077 |
*/ |
| 4078 |
enum qca_wlan_vendor_attr_tdls_configuration { |
| 4079 |
QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_INVALID = 0, |
| 4080 |
QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_TRIGGER_MODE = 1, |
| 4081 |
|
| 4082 |
/* Attributes configuring the TDLS Implicit Trigger */ |
| 4083 |
QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_TX_STATS_PERIOD = 2, |
| 4084 |
QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_TX_THRESHOLD = 3, |
| 4085 |
QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_DISCOVERY_PERIOD = 4, |
| 4086 |
QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_MAX_DISCOVERY_ATTEMPT = 5, |
| 4087 |
QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_IDLE_TIMEOUT = 6, |
| 4088 |
QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_IDLE_PACKET_THRESHOLD = 7, |
| 4089 |
QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_SETUP_RSSI_THRESHOLD = 8, |
| 4090 |
QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_TEARDOWN_RSSI_THRESHOLD = 9, |
| 4091 |
|
| 4092 |
/* keep last */ |
| 4093 |
QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_AFTER_LAST, |
| 4094 |
QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_MAX = |
| 4095 |
QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_AFTER_LAST - 1 |
| 4096 |
}; |
| 4097 |
|
| 4098 |
/** |
| 4099 |
* enum qca_wlan_vendor_tdls_trigger_mode: Represents the TDLS trigger mode in |
| 4100 |
* the driver |
| 4101 |
* |
| 4102 |
* The following are the different values for |
| 4103 |
* QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_TRIGGER_MODE. |
| 4104 |
* |
| 4105 |
* @QCA_WLAN_VENDOR_TDLS_TRIGGER_MODE_EXPLICIT: The trigger to initiate/teardown |
| 4106 |
* the TDLS connection to a respective peer comes from the user space. |
| 4107 |
* wpa_supplicant provides the commands TDLS_SETUP, TDLS_TEARDOWN, |
| 4108 |
* TDLS_DISCOVER to do this. |
| 4109 |
* @QCA_WLAN_VENDOR_TDLS_TRIGGER_MODE_IMPLICIT: Host driver triggers this TDLS |
| 4110 |
* setup/teardown to the eligible peer once the configured criteria |
| 4111 |
* (such as TX/RX threshold, RSSI) is met. The attributes |
| 4112 |
* in QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_IMPLICIT_PARAMS correspond to |
| 4113 |
* the different configuration criteria for the TDLS trigger from the |
| 4114 |
* host driver. |
| 4115 |
* @QCA_WLAN_VENDOR_TDLS_TRIGGER_MODE_EXTERNAL: Enables the driver to trigger |
| 4116 |
* the TDLS setup / teardown through the implicit mode only to the |
| 4117 |
* configured MAC addresses (wpa_supplicant, with tdls_external_control=1, |
| 4118 |
* configures the MAC address through TDLS_SETUP / TDLS_TEARDOWN commands). |
| 4119 |
* External mode works on top of the implicit mode. Thus the host driver |
| 4120 |
* is expected to configure in TDLS Implicit mode too to operate in |
| 4121 |
* External mode. |
| 4122 |
* Configuring External mode alone without Implicit mode is invalid. |
| 4123 |
* |
| 4124 |
* All the above implementations work as expected only when the host driver |
| 4125 |
* advertises the capability WPA_DRIVER_FLAGS_TDLS_EXTERNAL_SETUP - representing |
| 4126 |
* that the TDLS message exchange is not internal to the host driver, but |
| 4127 |
* depends on wpa_supplicant to do the message exchange. |
| 4128 |
*/ |
| 4129 |
enum qca_wlan_vendor_tdls_trigger_mode { |
| 4130 |
QCA_WLAN_VENDOR_TDLS_TRIGGER_MODE_EXPLICIT = 1 << 0, |
| 4131 |
QCA_WLAN_VENDOR_TDLS_TRIGGER_MODE_IMPLICIT = 1 << 1, |
| 4132 |
QCA_WLAN_VENDOR_TDLS_TRIGGER_MODE_EXTERNAL = 1 << 2, |
| 4133 |
}; |
| 4134 |
|
| 4135 |
/** |
| 4136 |
* enum qca_vendor_attr_sar_limits_selections - Source of SAR power limits |
| 4137 |
* @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_BDF0: Select SAR profile #0 |
| 4138 |
* that is hard-coded in the Board Data File (BDF). |
| 4139 |
* @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_BDF1: Select SAR profile #1 |
| 4140 |
* that is hard-coded in the Board Data File (BDF). |
| 4141 |
* @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_BDF2: Select SAR profile #2 |
| 4142 |
* that is hard-coded in the Board Data File (BDF). |
| 4143 |
* @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_BDF3: Select SAR profile #3 |
| 4144 |
* that is hard-coded in the Board Data File (BDF). |
| 4145 |
* @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_BDF4: Select SAR profile #4 |
| 4146 |
* that is hard-coded in the Board Data File (BDF). |
| 4147 |
* @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_NONE: Do not select any |
| 4148 |
* source of SAR power limits, thereby disabling the SAR power |
| 4149 |
* limit feature. |
| 4150 |
* @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_USER: Select the SAR power |
| 4151 |
* limits configured by %QCA_NL80211_VENDOR_SUBCMD_SET_SAR. |
| 4152 |
* @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_V2_0: Select the SAR power |
| 4153 |
* limits version 2.0 configured by %QCA_NL80211_VENDOR_SUBCMD_SET_SAR. |
| 4154 |
* |
| 4155 |
* This enumerates the valid set of values that may be supplied for |
| 4156 |
* attribute %QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT in an instance of |
| 4157 |
* the %QCA_NL80211_VENDOR_SUBCMD_SET_SAR_LIMITS vendor command or in |
| 4158 |
* the response to an instance of the |
| 4159 |
* %QCA_NL80211_VENDOR_SUBCMD_GET_SAR_LIMITS vendor command. |
| 4160 |
*/ |
| 4161 |
enum qca_vendor_attr_sar_limits_selections { |
| 4162 |
QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_BDF0 = 0, |
| 4163 |
QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_BDF1 = 1, |
| 4164 |
QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_BDF2 = 2, |
| 4165 |
QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_BDF3 = 3, |
| 4166 |
QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_BDF4 = 4, |
| 4167 |
QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_NONE = 5, |
| 4168 |
QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_USER = 6, |
| 4169 |
QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_V2_0 = 7, |
| 4170 |
}; |
| 4171 |
|
| 4172 |
/** |
| 4173 |
* enum qca_vendor_attr_sar_limits_spec_modulations - |
| 4174 |
* SAR limits specification modulation |
| 4175 |
* @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_MODULATION_CCK - |
| 4176 |
* CCK modulation |
| 4177 |
* @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_MODULATION_OFDM - |
| 4178 |
* OFDM modulation |
| 4179 |
* |
| 4180 |
* This enumerates the valid set of values that may be supplied for |
| 4181 |
* attribute %QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_MODULATION in an |
| 4182 |
* instance of attribute %QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC in an |
| 4183 |
* instance of the %QCA_NL80211_VENDOR_SUBCMD_SET_SAR_LIMITS vendor |
| 4184 |
* command or in the response to an instance of the |
| 4185 |
* %QCA_NL80211_VENDOR_SUBCMD_GET_SAR_LIMITS vendor command. |
| 4186 |
*/ |
| 4187 |
enum qca_vendor_attr_sar_limits_spec_modulations { |
| 4188 |
QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_MODULATION_CCK = 0, |
| 4189 |
QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_MODULATION_OFDM = 1, |
| 4190 |
}; |
| 4191 |
|
| 4192 |
/** |
| 4193 |
* enum qca_vendor_attr_sar_limits - Attributes for SAR power limits |
| 4194 |
* |
| 4195 |
* @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SAR_ENABLE: Optional (u32) value to |
| 4196 |
* select which SAR power limit table should be used. Valid |
| 4197 |
* values are enumerated in enum |
| 4198 |
* %qca_vendor_attr_sar_limits_selections. The existing SAR |
| 4199 |
* power limit selection is unchanged if this attribute is not |
| 4200 |
* present. |
| 4201 |
* |
| 4202 |
* @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_NUM_SPECS: Optional (u32) value |
| 4203 |
* which specifies the number of SAR power limit specifications |
| 4204 |
* which will follow. |
| 4205 |
* |
| 4206 |
* @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC: Nested array of SAR power |
| 4207 |
* limit specifications. The number of specifications is |
| 4208 |
* specified by @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_NUM_SPECS. Each |
| 4209 |
* specification contains a set of |
| 4210 |
* QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_* attributes. A |
| 4211 |
* specification is uniquely identified by the attributes |
| 4212 |
* %QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_BAND, |
| 4213 |
* %QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_CHAIN, and |
| 4214 |
* %QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_MODULATION and always |
| 4215 |
* contains as a payload the attribute |
| 4216 |
* %QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_POWER_LIMIT, |
| 4217 |
* %QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_POWER_LIMIT_INDEX. |
| 4218 |
* Either %QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_POWER_LIMIT or |
| 4219 |
* %QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_POWER_LIMIT_INDEX is |
| 4220 |
* needed based upon the value of |
| 4221 |
* %QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SAR_ENABLE. |
| 4222 |
* |
| 4223 |
* @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_BAND: Optional (u32) value to |
| 4224 |
* indicate for which band this specification applies. Valid |
| 4225 |
* values are enumerated in enum %nl80211_band (although not all |
| 4226 |
* bands may be supported by a given device). If the attribute is |
| 4227 |
* not supplied then the specification will be applied to all |
| 4228 |
* supported bands. |
| 4229 |
* |
| 4230 |
* @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_CHAIN: Optional (u32) value |
| 4231 |
* to indicate for which antenna chain this specification |
| 4232 |
* applies, i.e. 1 for chain 1, 2 for chain 2, etc. If the |
| 4233 |
* attribute is not supplied then the specification will be |
| 4234 |
* applied to all chains. |
| 4235 |
* |
| 4236 |
* @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_MODULATION: Optional (u32) |
| 4237 |
* value to indicate for which modulation scheme this |
| 4238 |
* specification applies. Valid values are enumerated in enum |
| 4239 |
* %qca_vendor_attr_sar_limits_spec_modulations. If the attribute |
| 4240 |
* is not supplied then the specification will be applied to all |
| 4241 |
* modulation schemes. |
| 4242 |
* |
| 4243 |
* @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_POWER_LIMIT: Required (u32) |
| 4244 |
* value to specify the actual power limit value in units of 0.5 |
| 4245 |
* dBm (i.e., a value of 11 represents 5.5 dBm). |
| 4246 |
* This is required, when %QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT is |
| 4247 |
* %QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_USER. |
| 4248 |
* |
| 4249 |
* @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_POWER_LIMIT_INDEX: Required (u32) |
| 4250 |
* value to indicate SAR V2 indices (0 - 11) to select SAR V2 profiles. |
| 4251 |
* This is required, when %QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT is |
| 4252 |
* %QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_V2_0. |
| 4253 |
* |
| 4254 |
* These attributes are used with %QCA_NL80211_VENDOR_SUBCMD_SET_SAR_LIMITS |
| 4255 |
* and %QCA_NL80211_VENDOR_SUBCMD_GET_SAR_LIMITS. |
| 4256 |
*/ |
| 4257 |
enum qca_vendor_attr_sar_limits { |
| 4258 |
QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_INVALID = 0, |
| 4259 |
QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SAR_ENABLE = 1, |
| 4260 |
QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_NUM_SPECS = 2, |
| 4261 |
QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC = 3, |
| 4262 |
QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_BAND = 4, |
| 4263 |
QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_CHAIN = 5, |
| 4264 |
QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_MODULATION = 6, |
| 4265 |
QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_POWER_LIMIT = 7, |
| 4266 |
QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_POWER_LIMIT_INDEX = 8, |
| 4267 |
|
| 4268 |
QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_AFTER_LAST, |
| 4269 |
QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_MAX = |
| 4270 |
QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_AFTER_LAST - 1 |
| 4271 |
}; |
| 4272 |
|
| 4273 |
/** |
| 4274 |
* enum qca_wlan_vendor_attr_get_wifi_info: Attributes for data used by |
| 4275 |
* QCA_NL80211_VENDOR_SUBCMD_GET_WIFI_INFO sub command. |
| 4276 |
* |
| 4277 |
* @QCA_WLAN_VENDOR_ATTR_WIFI_INFO_DRIVER_VERSION: In a request this attribute |
| 4278 |
* should be set to any U8 value to indicate that the driver version |
| 4279 |
* should be returned. When enabled in this manner, in a response this |
| 4280 |
* attribute will contain a string representation of the driver version. |
| 4281 |
* |
| 4282 |
* @QCA_WLAN_VENDOR_ATTR_WIFI_INFO_FIRMWARE_VERSION: In a request this attribute |
| 4283 |
* should be set to any U8 value to indicate that the firmware version |
| 4284 |
* should be returned. When enabled in this manner, in a response this |
| 4285 |
* attribute will contain a string representation of the firmware version. |
| 4286 |
* |
| 4287 |
* @QCA_WLAN_VENDOR_ATTR_WIFI_INFO_RADIO_INDEX: In a request this attribute |
| 4288 |
* should be set to any U32 value to indicate that the current radio |
| 4289 |
* index should be returned. When enabled in this manner, in a response |
| 4290 |
* this attribute will contain a U32 radio index value. |
| 4291 |
* |
| 4292 |
*/ |
| 4293 |
enum qca_wlan_vendor_attr_get_wifi_info { |
| 4294 |
QCA_WLAN_VENDOR_ATTR_WIFI_INFO_GET_INVALID = 0, |
| 4295 |
QCA_WLAN_VENDOR_ATTR_WIFI_INFO_DRIVER_VERSION = 1, |
| 4296 |
QCA_WLAN_VENDOR_ATTR_WIFI_INFO_FIRMWARE_VERSION = 2, |
| 4297 |
QCA_WLAN_VENDOR_ATTR_WIFI_INFO_RADIO_INDEX = 3, |
| 4298 |
|
| 4299 |
/* keep last */ |
| 4300 |
QCA_WLAN_VENDOR_ATTR_WIFI_INFO_GET_AFTER_LAST, |
| 4301 |
QCA_WLAN_VENDOR_ATTR_WIFI_INFO_GET_MAX = |
| 4302 |
QCA_WLAN_VENDOR_ATTR_WIFI_INFO_GET_AFTER_LAST - 1, |
| 4303 |
}; |
| 4304 |
|
| 4305 |
/* |
| 4306 |
* enum qca_wlan_vendor_attr_wifi_logger_start: Attributes for data used by |
| 4307 |
* QCA_NL80211_VENDOR_SUBCMD_WIFI_LOGGER_START sub command. |
| 4308 |
*/ |
| 4309 |
enum qca_wlan_vendor_attr_wifi_logger_start { |
| 4310 |
QCA_WLAN_VENDOR_ATTR_WIFI_LOGGER_START_INVALID = 0, |
| 4311 |
QCA_WLAN_VENDOR_ATTR_WIFI_LOGGER_RING_ID = 1, |
| 4312 |
QCA_WLAN_VENDOR_ATTR_WIFI_LOGGER_VERBOSE_LEVEL = 2, |
| 4313 |
QCA_WLAN_VENDOR_ATTR_WIFI_LOGGER_FLAGS = 3, |
| 4314 |
|
| 4315 |
/* keep last */ |
| 4316 |
QCA_WLAN_VENDOR_ATTR_WIFI_LOGGER_START_AFTER_LAST, |
| 4317 |
QCA_WLAN_VENDOR_ATTR_WIFI_LOGGER_START_GET_MAX = |
| 4318 |
QCA_WLAN_VENDOR_ATTR_WIFI_LOGGER_START_AFTER_LAST - 1, |
| 4319 |
}; |
| 4320 |
|
| 4321 |
enum qca_wlan_vendor_attr_logger_results { |
| 4322 |
QCA_WLAN_VENDOR_ATTR_LOGGER_RESULTS_INVALID = 0, |
| 4323 |
|
| 4324 |
/* Unsigned 32-bit value; must match the request Id supplied by |
| 4325 |
* Wi-Fi HAL in the corresponding subcmd NL msg. |
| 4326 |
*/ |
| 4327 |
QCA_WLAN_VENDOR_ATTR_LOGGER_RESULTS_REQUEST_ID = 1, |
| 4328 |
|
| 4329 |
/* Unsigned 32-bit value; used to indicate the size of memory |
| 4330 |
* dump to be allocated. |
| 4331 |
*/ |
| 4332 |
QCA_WLAN_VENDOR_ATTR_LOGGER_RESULTS_MEMDUMP_SIZE = 2, |
| 4333 |
|
| 4334 |
/* keep last */ |
| 4335 |
QCA_WLAN_VENDOR_ATTR_LOGGER_RESULTS_AFTER_LAST, |
| 4336 |
QCA_WLAN_VENDOR_ATTR_LOGGER_RESULTS_MAX = |
| 4337 |
QCA_WLAN_VENDOR_ATTR_LOGGER_RESULTS_AFTER_LAST - 1, |
| 4338 |
}; |
| 4339 |
|
| 4340 |
/** |
| 4341 |
* enum qca_scan_freq_list_type: Frequency list types |
| 4342 |
* |
| 4343 |
* @QCA_PREFERRED_SCAN_FREQ_LIST: The driver shall use the scan frequency list |
| 4344 |
* specified with attribute QCA_ATTR_ROAM_CONTROL_SCAN_FREQ_LIST as |
| 4345 |
* a preferred frequency list for roaming. |
| 4346 |
* |
| 4347 |
* @QCA_SPECIFIC_SCAN_FREQ_LIST: The driver shall use the frequency list |
| 4348 |
* specified with attribute QCA_ATTR_ROAM_CONTROL_SCAN_FREQ_LIST as |
| 4349 |
* a specific frequency list for roaming. |
| 4350 |
*/ |
| 4351 |
enum qca_scan_freq_list_type { |
| 4352 |
QCA_PREFERRED_SCAN_FREQ_LIST = 1, |
| 4353 |
QCA_SPECIFIC_SCAN_FREQ_LIST = 2, |
| 4354 |
}; |
| 4355 |
|
| 4356 |
/** |
| 4357 |
* enum qca_vendor_attr_scan_freq_list_scheme: Frequency list scheme |
| 4358 |
* |
| 4359 |
* @QCA_ATTR_ROAM_CONTROL_SCAN_FREQ_LIST: Nested attribute of u32 values |
| 4360 |
* List of frequencies in MHz to be considered for a roam scan. |
| 4361 |
* |
| 4362 |
* @QCA_ATTR_ROAM_CONTROL_SCAN_FREQ_LIST_TYPE: Unsigned 32-bit value. |
| 4363 |
* Type of frequency list scheme being configured/gotten as defined by the |
| 4364 |
* enum qca_scan_freq_list_type. |
| 4365 |
*/ |
| 4366 |
enum qca_vendor_attr_scan_freq_list_scheme { |
| 4367 |
QCA_ATTR_ROAM_CONTROL_SCAN_FREQ_LIST = 1, |
| 4368 |
QCA_ATTR_ROAM_CONTROL_SCAN_FREQ_LIST_TYPE = 2, |
| 4369 |
|
| 4370 |
/* keep last */ |
| 4371 |
QCA_ATTR_ROAM_CONTROL_SCAN_FREQ_LIST_SCHEME_AFTER_LAST, |
| 4372 |
QCA_ATTR_ROAM_CONTROL_SCAN_FREQ_LIST_SCHEME_MAX = |
| 4373 |
QCA_ATTR_ROAM_CONTROL_SCAN_FREQ_LIST_SCHEME_AFTER_LAST - 1, |
| 4374 |
}; |
| 4375 |
|
| 4376 |
/** |
| 4377 |
* enum qca_roam_scan_scheme: Scan scheme |
| 4378 |
* |
| 4379 |
* @QCA_ROAM_SCAN_SCHEME_NO_SCAN: No frequencies specified to scan. |
| 4380 |
* Indicates the driver to not scan on a Roam Trigger scenario, but |
| 4381 |
* disconnect. E.g., on a BTM request from the AP the driver/firmware shall |
| 4382 |
* disconnect from the current connected AP by notifying a failure |
| 4383 |
* code in the BTM response. |
| 4384 |
* |
| 4385 |
* @QCA_ROAM_SCAN_SCHEME_PARTIAL_SCAN: Indicates the driver/firmware to |
| 4386 |
* trigger partial frequency scans. These frequencies are the ones learned |
| 4387 |
* or maintained by the driver based on the probability of finding the |
| 4388 |
* BSSIDs in the ESS for which the roaming is triggered. |
| 4389 |
* |
| 4390 |
* @QCA_ROAM_SCAN_SCHEME_FULL_SCAN: Indicates the driver/firmware to |
| 4391 |
* trigger the scan on all the valid frequencies to find better |
| 4392 |
* candidates to roam. |
| 4393 |
*/ |
| 4394 |
enum qca_roam_scan_scheme { |
| 4395 |
QCA_ROAM_SCAN_SCHEME_NO_SCAN = 0, |
| 4396 |
QCA_ROAM_SCAN_SCHEME_PARTIAL_SCAN = 1, |
| 4397 |
QCA_ROAM_SCAN_SCHEME_FULL_SCAN = 2, |
| 4398 |
}; |
| 4399 |
|
| 4400 |
/* |
| 4401 |
* enum qca_vendor_roam_triggers: Bitmap of roaming triggers |
| 4402 |
* |
| 4403 |
* @QCA_ROAM_TRIGGER_REASON_PER: Set if the roam has to be triggered based on |
| 4404 |
* a bad packet error rates (PER). |
| 4405 |
* @QCA_ROAM_TRIGGER_REASON_BEACON_MISS: Set if the roam has to be triggered |
| 4406 |
* based on beacon misses from the connected AP. |
| 4407 |
* @QCA_ROAM_TRIGGER_REASON_POOR_RSSI: Set if the roam has to be triggered |
| 4408 |
* due to poor RSSI of the connected AP. |
| 4409 |
* @QCA_ROAM_TRIGGER_REASON_BETTER_RSSI: Set if the roam has to be triggered |
| 4410 |
* upon finding a BSSID with a better RSSI than the connected BSSID. |
| 4411 |
* Here the RSSI of the current BSSID need not be poor. |
| 4412 |
* @QCA_ROAM_TRIGGER_REASON_PERIODIC: Set if the roam has to be triggered |
| 4413 |
* by triggering a periodic scan to find a better AP to roam. |
| 4414 |
* @QCA_ROAM_TRIGGER_REASON_DENSE: Set if the roam has to be triggered |
| 4415 |
* when the connected channel environment is too noisy/congested. |
| 4416 |
* @QCA_ROAM_TRIGGER_REASON_BTM: Set if the roam has to be triggered |
| 4417 |
* when BTM Request frame is received from the connected AP. |
| 4418 |
* @QCA_ROAM_TRIGGER_REASON_BSS_LOAD: Set if the roam has to be triggered |
| 4419 |
* when the channel utilization is goes above the configured threshold. |
| 4420 |
* @QCA_ROAM_TRIGGER_REASON_USER_TRIGGER: Set if the roam has to be triggered |
| 4421 |
* based on the request from the user (space). |
| 4422 |
* @QCA_ROAM_TRIGGER_REASON_DEAUTH: Set if the roam has to be triggered when |
| 4423 |
* device receives Deauthentication/Disassociation frame from connected AP. |
| 4424 |
* @QCA_ROAM_TRIGGER_REASON_IDLE: Set if the roam has to be triggered when the |
| 4425 |
* device is in idle state (no TX/RX) and suspend mode, if the current RSSI |
| 4426 |
* is determined to be a poor one. |
| 4427 |
* @QCA_ROAM_TRIGGER_REASON_TX_FAILURES: Set if the roam has to be triggered |
| 4428 |
* based on continuous TX Data frame failures to the connected AP. |
| 4429 |
* @QCA_ROAM_TRIGGER_REASON_EXTERNAL_SCAN: Set if the roam has to be triggered |
| 4430 |
* based on the scan results obtained from an external scan (not triggered |
| 4431 |
* to aim roaming). |
| 4432 |
* |
| 4433 |
* Set the corresponding roam trigger reason bit to consider it for roam |
| 4434 |
* trigger. |
| 4435 |
* Userspace can set multiple bits and send to the driver. The driver shall |
| 4436 |
* consider all of them to trigger/initiate a roam scan. |
| 4437 |
*/ |
| 4438 |
enum qca_vendor_roam_triggers { |
| 4439 |
QCA_ROAM_TRIGGER_REASON_PER = 1 << 0, |
| 4440 |
QCA_ROAM_TRIGGER_REASON_BEACON_MISS = 1 << 1, |
| 4441 |
QCA_ROAM_TRIGGER_REASON_POOR_RSSI = 1 << 2, |
| 4442 |
QCA_ROAM_TRIGGER_REASON_BETTER_RSSI = 1 << 3, |
| 4443 |
QCA_ROAM_TRIGGER_REASON_PERIODIC = 1 << 4, |
| 4444 |
QCA_ROAM_TRIGGER_REASON_DENSE = 1 << 5, |
| 4445 |
QCA_ROAM_TRIGGER_REASON_BTM = 1 << 6, |
| 4446 |
QCA_ROAM_TRIGGER_REASON_BSS_LOAD = 1 << 7, |
| 4447 |
QCA_ROAM_TRIGGER_REASON_USER_TRIGGER = 1 << 8, |
| 4448 |
QCA_ROAM_TRIGGER_REASON_DEAUTH = 1 << 9, |
| 4449 |
QCA_ROAM_TRIGGER_REASON_IDLE = 1 << 10, |
| 4450 |
QCA_ROAM_TRIGGER_REASON_TX_FAILURES = 1 << 11, |
| 4451 |
QCA_ROAM_TRIGGER_REASON_EXTERNAL_SCAN = 1 << 12, |
| 4452 |
}; |
| 4453 |
|
| 4454 |
/* |
| 4455 |
* enum qca_vendor_roam_fail_reasons: Defines the various roam |
| 4456 |
* fail reasons. This enum value is used in |
| 4457 |
* @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_ROAM_FAIL_REASON attribute. |
| 4458 |
* |
| 4459 |
* @QCA_ROAM_FAIL_REASON_SCAN_NOT_ALLOWED: Roam module in the firmware is not |
| 4460 |
* able to trigger the scan. |
| 4461 |
* @QCA_ROAM_FAIL_REASON_NO_AP_FOUND: No roamable APs found during roam scan. |
| 4462 |
* @QCA_ROAM_FAIL_REASON_NO_CAND_AP_FOUND: No candidate APs found during roam |
| 4463 |
* scan. |
| 4464 |
* @QCA_ROAM_FAIL_REASON_HOST: Roam fail due to disconnect issued from host. |
| 4465 |
* @QCA_ROAM_FAIL_REASON_AUTH_SEND: Unable to send Authentication frame. |
| 4466 |
* @QCA_ROAM_FAIL_REASON_AUTH_RECV: Received Authentication frame with error |
| 4467 |
* status code. |
| 4468 |
* @QCA_ROAM_FAIL_REASON_NO_AUTH_RESP: Authentication frame not received. |
| 4469 |
* @QCA_ROAM_FAIL_REASON_REASSOC_SEND: Unable to send Reassociation Request |
| 4470 |
* frame. |
| 4471 |
* @QCA_ROAM_FAIL_REASON_REASSOC_RECV: Received Reassociation Response frame |
| 4472 |
* with error status code. |
| 4473 |
* @QCA_ROAM_FAIL_REASON_NO_REASSOC_RESP: Reassociation Response frame not |
| 4474 |
* received. |
| 4475 |
* @QCA_ROAM_FAIL_REASON_SCAN_FAIL: Scan module not able to start scan. |
| 4476 |
* @QCA_ROAM_FAIL_REASON_AUTH_NO_ACK: No ACK is received for Authentication |
| 4477 |
* frame. |
| 4478 |
* @QCA_ROAM_FAIL_REASON_AUTH_INTERNAL_DROP: Authentication frame is dropped |
| 4479 |
* internally before transmission. |
| 4480 |
* @QCA_ROAM_FAIL_REASON_REASSOC_NO_ACK: No ACK is received for Reassociation |
| 4481 |
* Request frame. |
| 4482 |
* @QCA_ROAM_FAIL_REASON_REASSOC_INTERNAL_DROP: Reassociation Request frame is |
| 4483 |
* dropped internally. |
| 4484 |
* @QCA_ROAM_FAIL_REASON_EAPOL_M1_TIMEOUT: EAPOL-Key M1 is not received and |
| 4485 |
* times out. |
| 4486 |
* @QCA_ROAM_FAIL_REASON_EAPOL_M2_SEND: Unable to send EAPOL-Key M2 frame. |
| 4487 |
* @QCA_ROAM_FAIL_REASON_EAPOL_M2_INTERNAL_DROP: EAPOL-Key M2 frame dropped |
| 4488 |
* internally. |
| 4489 |
* @QCA_ROAM_FAIL_REASON_EAPOL_M2_NO_ACK: No ACK is received for EAPOL-Key |
| 4490 |
* M2 frame. |
| 4491 |
* @QCA_ROAM_FAIL_REASON_EAPOL_M3_TIMEOUT: EAPOL-Key M3 frame is not received. |
| 4492 |
* @QCA_ROAM_FAIL_REASON_EAPOL_M4_SEND: Unable to send EAPOL-Key M4 frame. |
| 4493 |
* @QCA_ROAM_FAIL_REASON_EAPOL_M4_INTERNAL_DROP: EAPOL-Key M4 frame dropped |
| 4494 |
* internally. |
| 4495 |
* @QCA_ROAM_FAIL_REASON_EAPOL_M4_NO_ACK: No ACK is received for EAPOL-Key M4 |
| 4496 |
* frame. |
| 4497 |
* @QCA_ROAM_FAIL_REASON_NO_SCAN_FOR_FINAL_BEACON_MISS: Roam scan is not |
| 4498 |
* started for final beacon miss case. |
| 4499 |
* @QCA_ROAM_FAIL_REASON_DISCONNECT: Deauthentication or Disassociation frame |
| 4500 |
* received from the AP during roaming handoff. |
| 4501 |
* @QCA_ROAM_FAIL_REASON_RESUME_ABORT: Firmware roams to the AP when the Apps |
| 4502 |
* or host is suspended and gives the indication of the last roamed AP only |
| 4503 |
* when the Apps is resumed. If the Apps is resumed while the roaming is in |
| 4504 |
* progress, this ongoing roaming is aborted and the last roamed AP is |
| 4505 |
* indicated to host. |
| 4506 |
* @QCA_ROAM_FAIL_REASON_SAE_INVALID_PMKID: WPA3-SAE invalid PMKID. |
| 4507 |
* @QCA_ROAM_FAIL_REASON_SAE_PREAUTH_TIMEOUT: WPA3-SAE pre-authentication times |
| 4508 |
* out. |
| 4509 |
* @QCA_ROAM_FAIL_REASON_SAE_PREAUTH_FAIL: WPA3-SAE pre-authentication fails. |
| 4510 |
*/ |
| 4511 |
enum qca_vendor_roam_fail_reasons { |
| 4512 |
QCA_ROAM_FAIL_REASON_NONE = 0, |
| 4513 |
QCA_ROAM_FAIL_REASON_SCAN_NOT_ALLOWED = 1, |
| 4514 |
QCA_ROAM_FAIL_REASON_NO_AP_FOUND = 2, |
| 4515 |
QCA_ROAM_FAIL_REASON_NO_CAND_AP_FOUND = 3, |
| 4516 |
QCA_ROAM_FAIL_REASON_HOST = 4, |
| 4517 |
QCA_ROAM_FAIL_REASON_AUTH_SEND = 5, |
| 4518 |
QCA_ROAM_FAIL_REASON_AUTH_RECV = 6, |
| 4519 |
QCA_ROAM_FAIL_REASON_NO_AUTH_RESP = 7, |
| 4520 |
QCA_ROAM_FAIL_REASON_REASSOC_SEND = 8, |
| 4521 |
QCA_ROAM_FAIL_REASON_REASSOC_RECV = 9, |
| 4522 |
QCA_ROAM_FAIL_REASON_NO_REASSOC_RESP = 10, |
| 4523 |
QCA_ROAM_FAIL_REASON_SCAN_FAIL = 11, |
| 4524 |
QCA_ROAM_FAIL_REASON_AUTH_NO_ACK = 12, |
| 4525 |
QCA_ROAM_FAIL_REASON_AUTH_INTERNAL_DROP = 13, |
| 4526 |
QCA_ROAM_FAIL_REASON_REASSOC_NO_ACK = 14, |
| 4527 |
QCA_ROAM_FAIL_REASON_REASSOC_INTERNAL_DROP = 15, |
| 4528 |
QCA_ROAM_FAIL_REASON_EAPOL_M1_TIMEOUT = 16, |
| 4529 |
QCA_ROAM_FAIL_REASON_EAPOL_M2_SEND = 17, |
| 4530 |
QCA_ROAM_FAIL_REASON_EAPOL_M2_INTERNAL_DROP = 18, |
| 4531 |
QCA_ROAM_FAIL_REASON_EAPOL_M2_NO_ACK = 19, |
| 4532 |
QCA_ROAM_FAIL_REASON_EAPOL_M3_TIMEOUT = 20, |
| 4533 |
QCA_ROAM_FAIL_REASON_EAPOL_M4_SEND = 21, |
| 4534 |
QCA_ROAM_FAIL_REASON_EAPOL_M4_INTERNAL_DROP = 22, |
| 4535 |
QCA_ROAM_FAIL_REASON_EAPOL_M4_NO_ACK = 23, |
| 4536 |
QCA_ROAM_FAIL_REASON_NO_SCAN_FOR_FINAL_BEACON_MISS = 24, |
| 4537 |
QCA_ROAM_FAIL_REASON_DISCONNECT = 25, |
| 4538 |
QCA_ROAM_FAIL_REASON_RESUME_ABORT = 26, |
| 4539 |
QCA_ROAM_FAIL_REASON_SAE_INVALID_PMKID = 27, |
| 4540 |
QCA_ROAM_FAIL_REASON_SAE_PREAUTH_TIMEOUT = 28, |
| 4541 |
QCA_ROAM_FAIL_REASON_SAE_PREAUTH_FAIL = 29, |
| 4542 |
}; |
| 4543 |
|
| 4544 |
/* |
| 4545 |
* enum qca_vendor_roam_invoke_fail_reasons: Defines the various roam |
| 4546 |
* invoke fail reasons. This enum value is used in |
| 4547 |
* @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_ROAM_INVOKE_FAIL_REASON attribute. |
| 4548 |
* |
| 4549 |
* @QCA_ROAM_INVOKE_STATUS_IFACE_INVALID: Invalid interface ID is passed |
| 4550 |
* in roam invoke command. |
| 4551 |
* @QCA_ROAM_INVOKE_STATUS_OFFLOAD_DISABLE: Roam offload in firmware is not |
| 4552 |
* enabled. |
| 4553 |
* @QCA_ROAM_INVOKE_STATUS_AP_SSID_LENGTH_INVALID: Connected AP profile SSID |
| 4554 |
* length is invalid. |
| 4555 |
* @QCA_ROAM_INVOKE_STATUS_ROAM_DISALLOW: Firmware internal roaming is already |
| 4556 |
* in progress. |
| 4557 |
* @QCA_ROAM_INVOKE_STATUS_NON_ROAMABLE_AP: Host sends the Beacon/Probe Response |
| 4558 |
* of the AP in the roam invoke command to firmware. This reason is sent by the |
| 4559 |
* firmware when the given AP is configured to be ignored or SSID/security |
| 4560 |
* does not match. |
| 4561 |
* @QCA_ROAM_INVOKE_STATUS_ROAM_INTERNAL_FAIL: Roam handoff failed because of |
| 4562 |
* firmware internal reasons. |
| 4563 |
* @QCA_ROAM_INVOKE_STATUS_DISALLOW: Roam invoke trigger is not enabled. |
| 4564 |
* @QCA_ROAM_INVOKE_STATUS_SCAN_FAIL: Scan start fail for roam invoke. |
| 4565 |
* @QCA_ROAM_INVOKE_STATUS_START_ROAM_FAIL: Roam handoff start fail. |
| 4566 |
* @QCA_ROAM_INVOKE_STATUS_INVALID_PARAMS: Roam invoke parameters are invalid. |
| 4567 |
* @QCA_ROAM_INVOKE_STATUS_NO_CAND_AP: No candidate AP found to roam to. |
| 4568 |
* @QCA_ROAM_INVOKE_STATUS_ROAM_FAIL: Roam handoff failed. |
| 4569 |
*/ |
| 4570 |
enum qca_vendor_roam_invoke_fail_reasons { |
| 4571 |
QCA_ROAM_INVOKE_STATUS_NONE = 0, |
| 4572 |
QCA_ROAM_INVOKE_STATUS_IFACE_INVALID = 1, |
| 4573 |
QCA_ROAM_INVOKE_STATUS_OFFLOAD_DISABLE = 2, |
| 4574 |
QCA_ROAM_INVOKE_STATUS_AP_SSID_LENGTH_INVALID = 3, |
| 4575 |
QCA_ROAM_INVOKE_STATUS_ROAM_DISALLOW = 4, |
| 4576 |
QCA_ROAM_INVOKE_STATUS_NON_ROAMABLE_AP = 5, |
| 4577 |
QCA_ROAM_INVOKE_STATUS_ROAM_INTERNAL_FAIL = 6, |
| 4578 |
QCA_ROAM_INVOKE_STATUS_DISALLOW = 7, |
| 4579 |
QCA_ROAM_INVOKE_STATUS_SCAN_FAIL = 8, |
| 4580 |
QCA_ROAM_INVOKE_STATUS_START_ROAM_FAIL = 9, |
| 4581 |
QCA_ROAM_INVOKE_STATUS_INVALID_PARAMS = 10, |
| 4582 |
QCA_ROAM_INVOKE_STATUS_NO_CAND_AP = 11, |
| 4583 |
QCA_ROAM_INVOKE_STATUS_ROAM_FAIL = 12, |
| 4584 |
|
| 4585 |
}; |
| 4586 |
|
| 4587 |
/** |
| 4588 |
* enum qca_vendor_attr_roam_candidate_selection_criteria: |
| 4589 |
* |
| 4590 |
* Each attribute carries a weightage in percentage (%). |
| 4591 |
* |
| 4592 |
* @QCA_ATTR_ROAM_CAND_SEL_CRITERIA_SCORE_RSSI: Unsigned 8-bit value. |
| 4593 |
* Represents the weightage to be given for the RSSI selection |
| 4594 |
* criteria among other parameters. |
| 4595 |
* |
| 4596 |
* @QCA_ATTR_ROAM_CAND_SEL_CRITERIA_RATE: Unsigned 8-bit value. |
| 4597 |
* Represents the weightage to be given for the rate selection |
| 4598 |
* criteria among other parameters. |
| 4599 |
* |
| 4600 |
* @QCA_ATTR_ROAM_CAND_SEL_CRITERIA_SCORE_BW: Unsigned 8-bit value. |
| 4601 |
* Represents the weightage to be given for the band width selection |
| 4602 |
* criteria among other parameters. |
| 4603 |
* |
| 4604 |
* @QCA_ATTR_ROAM_CAND_SEL_CRITERIA_SCORE_BAND: Unsigned 8-bit value. |
| 4605 |
* Represents the weightage to be given for the band selection |
| 4606 |
* criteria among other parameters. |
| 4607 |
* |
| 4608 |
* @QCA_ATTR_ROAM_CAND_SEL_CRITERIA_SCORE_NSS: Unsigned 8-bit value. |
| 4609 |
* Represents the weightage to be given for the NSS selection |
| 4610 |
* criteria among other parameters. |
| 4611 |
* |
| 4612 |
* @QCA_ATTR_ROAM_CAND_SEL_CRITERIA_SCORE_CHAN_CONGESTION: Unsigned 8-bit value. |
| 4613 |
* Represents the weightage to be given for the channel congestion |
| 4614 |
* selection criteria among other parameters. |
| 4615 |
* |
| 4616 |
* @QCA_ATTR_ROAM_CAND_SEL_CRITERIA_SCORE_BEAMFORMING: Unsigned 8-bit value. |
| 4617 |
* Represents the weightage to be given for the beamforming selection |
| 4618 |
* criteria among other parameters. |
| 4619 |
* |
| 4620 |
* @QCA_ATTR_ROAM_CAND_SEL_CRITERIA_SCORE_OCE_WAN: Unsigned 8-bit value. |
| 4621 |
* Represents the weightage to be given for the OCE selection |
| 4622 |
* criteria among other parameters. |
| 4623 |
*/ |
| 4624 |
enum qca_vendor_attr_roam_candidate_selection_criteria { |
| 4625 |
QCA_ATTR_ROAM_CAND_SEL_CRITERIA_SCORE_RSSI = 1, |
| 4626 |
QCA_ATTR_ROAM_CAND_SEL_CRITERIA_RATE = 2, |
| 4627 |
QCA_ATTR_ROAM_CAND_SEL_CRITERIA_SCORE_BW = 3, |
| 4628 |
QCA_ATTR_ROAM_CAND_SEL_CRITERIA_SCORE_BAND = 4, |
| 4629 |
QCA_ATTR_ROAM_CAND_SEL_CRITERIA_SCORE_NSS = 5, |
| 4630 |
QCA_ATTR_ROAM_CAND_SEL_CRITERIA_SCORE_CHAN_CONGESTION = 6, |
| 4631 |
QCA_ATTR_ROAM_CAND_SEL_CRITERIA_SCORE_BEAMFORMING = 7, |
| 4632 |
QCA_ATTR_ROAM_CAND_SEL_CRITERIA_SCORE_OCE_WAN = 8, |
| 4633 |
|
| 4634 |
/* keep last */ |
| 4635 |
QCA_ATTR_ROAM_CAND_SEL_CRITERIA_RATE_AFTER_LAST, |
| 4636 |
QCA_ATTR_ROAM_CAND_SEL_CRITERIA_RATE_MAX = |
| 4637 |
QCA_ATTR_ROAM_CAND_SEL_CRITERIA_RATE_AFTER_LAST - 1, |
| 4638 |
}; |
| 4639 |
|
| 4640 |
/** |
| 4641 |
* enum qca_vendor_attr_roam_control - Attributes to carry roam configuration |
| 4642 |
* The following attributes are used to set/get/clear the respective |
| 4643 |
* configurations to/from the driver. |
| 4644 |
* For the get, the attribute for the configuration to be queried shall |
| 4645 |
* carry any of its acceptable values to the driver. In return, the driver |
| 4646 |
* shall send the configured values within the same attribute to the user |
| 4647 |
* space. |
| 4648 |
* |
| 4649 |
* @QCA_ATTR_ROAM_CONTROL_ENABLE: Unsigned 8-bit value. |
| 4650 |
* Signifies to enable/disable roam control in driver. |
| 4651 |
* 1-enable, 0-disable |
| 4652 |
* Enable: Mandates the driver to do the further roams using the |
| 4653 |
* configuration parameters set through |
| 4654 |
* QCA_WLAN_VENDOR_ROAMING_SUBCMD_CONTROL_SET. |
| 4655 |
* Disable: Disables the driver/firmware roaming triggered through |
| 4656 |
* QCA_WLAN_VENDOR_ROAMING_SUBCMD_CONTROL_SET. Further roaming is |
| 4657 |
* expected to continue with the default configurations. |
| 4658 |
* |
| 4659 |
* @QCA_ATTR_ROAM_CONTROL_STATUS: Unsigned 8-bit value. |
| 4660 |
* This is used along with QCA_WLAN_VENDOR_ROAMING_SUBCMD_CONTROL_GET. |
| 4661 |
* Roam control status is obtained through this attribute. |
| 4662 |
* |
| 4663 |
* @QCA_ATTR_ROAM_CONTROL_CLEAR_ALL: Flag attribute to indicate the |
| 4664 |
* complete config set through QCA_WLAN_VENDOR_ROAMING_SUBCMD_CONTROL_SET |
| 4665 |
* is to be cleared in the driver. |
| 4666 |
* This is used along with QCA_WLAN_VENDOR_ROAMING_SUBCMD_CONTROL_CLEAR |
| 4667 |
* and shall be ignored if used with other sub commands. |
| 4668 |
* If this attribute is specified along with subcmd |
| 4669 |
* QCA_WLAN_VENDOR_ROAMING_SUBCMD_CONTROL_CLEAR, the driver shall ignore |
| 4670 |
* all other attributes, if there are any. |
| 4671 |
* If this attribute is not specified when the subcmd |
| 4672 |
* QCA_WLAN_VENDOR_ROAMING_SUBCMD_CONTROL_CLEAR is sent, the driver shall |
| 4673 |
* clear the data corresponding to the attributes specified. |
| 4674 |
* |
| 4675 |
* @QCA_ATTR_ROAM_CONTROL_FREQ_LIST_SCHEME: Nested attribute to carry the |
| 4676 |
* list of frequencies and its type, represented by |
| 4677 |
* enum qca_vendor_attr_scan_freq_list_scheme. |
| 4678 |
* Frequency list and its type are mandatory for this attribute to set |
| 4679 |
* the frequencies. |
| 4680 |
* Frequency type is mandatory for this attribute to get the frequencies |
| 4681 |
* and the frequency list is obtained through |
| 4682 |
* QCA_ATTR_ROAM_CONTROL_SCAN_FREQ_LIST. |
| 4683 |
* Frequency list type is mandatory for this attribute to clear the |
| 4684 |
* frequencies. |
| 4685 |
* |
| 4686 |
* @QCA_ATTR_ROAM_CONTROL_SCAN_PERIOD: Unsigned 32-bit value. |
| 4687 |
* Carries the value of scan period in seconds to set. |
| 4688 |
* The value of scan period is obtained with the same attribute for get. |
| 4689 |
* Clears the scan period in the driver when specified with clear command. |
| 4690 |
* Scan period is the idle time in seconds between each subsequent |
| 4691 |
* channel scans. |
| 4692 |
* |
| 4693 |
* @QCA_ATTR_ROAM_CONTROL_FULL_SCAN_PERIOD: Unsigned 32-bit value. |
| 4694 |
* Carries the value of full scan period in seconds to set. |
| 4695 |
* The value of full scan period is obtained with the same attribute for |
| 4696 |
* get. |
| 4697 |
* Clears the full scan period in the driver when specified with clear |
| 4698 |
* command. Full scan period is the idle period in seconds between two |
| 4699 |
* successive full channel roam scans. |
| 4700 |
* |
| 4701 |
* @QCA_ATTR_ROAM_CONTROL_TRIGGERS: Unsigned 32-bit value. |
| 4702 |
* Carries a bitmap of the roam triggers specified in |
| 4703 |
* enum qca_vendor_roam_triggers. |
| 4704 |
* The driver shall enable roaming by enabling corresponding roam triggers |
| 4705 |
* based on the trigger bits sent with this attribute. |
| 4706 |
* If this attribute is not configured, the driver shall proceed with |
| 4707 |
* default behavior. |
| 4708 |
* The bitmap configured is obtained with the same attribute for get. |
| 4709 |
* Clears the bitmap configured in driver when specified with clear |
| 4710 |
* command. |
| 4711 |
* |
| 4712 |
* @QCA_ATTR_ROAM_CONTROL_SELECTION_CRITERIA: Nested attribute signifying the |
| 4713 |
* weightage in percentage (%) to be given for each selection criteria. |
| 4714 |
* Different roam candidate selection criteria are represented by |
| 4715 |
* enum qca_vendor_attr_roam_candidate_selection_criteria. |
| 4716 |
* The driver shall select the roam candidate based on corresponding |
| 4717 |
* candidate selection scores sent. |
| 4718 |
* |
| 4719 |
* An empty nested attribute is used to indicate that no specific |
| 4720 |
* preference score/criteria is configured (i.e., to disable this mechanism |
| 4721 |
* in the set case and to show that the mechanism is disabled in the get |
| 4722 |
* case). |
| 4723 |
* |
| 4724 |
* Userspace can send multiple attributes out of this enum to the driver. |
| 4725 |
* Since this attribute represents the weight/percentage of preference for |
| 4726 |
* the respective selection criteria, it is preferred to configure 100% |
| 4727 |
* total weightage. The value in each attribute or cumulative weight of the |
| 4728 |
* values in all the nested attributes should not exceed 100%. The driver |
| 4729 |
* shall reject such configuration. |
| 4730 |
* |
| 4731 |
* If the weights configured through this attribute are less than 100%, |
| 4732 |
* the driver shall honor the weights (x%) passed for the corresponding |
| 4733 |
* selection criteria and choose/distribute rest of the weight (100-x)% |
| 4734 |
* for the other selection criteria, based on its internal logic. |
| 4735 |
* |
| 4736 |
* The selection criteria configured is obtained with the same |
| 4737 |
* attribute for get. |
| 4738 |
* |
| 4739 |
* Clears the selection criteria configured in the driver when specified |
| 4740 |
* with clear command. |
| 4741 |
* |
| 4742 |
* @QCA_ATTR_ROAM_CONTROL_SCAN_SCHEME: Unsigned 32-bit value. |
| 4743 |
* Represents value of the scan frequency scheme from enum |
| 4744 |
* qca_roam_scan_scheme. |
| 4745 |
* It's an optional attribute. If this attribute is not configured, the |
| 4746 |
* driver shall proceed with default behavior. |
| 4747 |
* |
| 4748 |
* @QCA_ATTR_ROAM_CONTROL_CONNECTED_RSSI_THRESHOLD: Signed 32-bit value in dBm, |
| 4749 |
* signifying the RSSI threshold of the current connected AP, indicating |
| 4750 |
* the driver to trigger roam only when the current connected AP's RSSI |
| 4751 |
* is less than this threshold. |
| 4752 |
* |
| 4753 |
* @QCA_ATTR_ROAM_CONTROL_CANDIDATE_RSSI_THRESHOLD: Signed 32-bit value in dBm, |
| 4754 |
* signifying the RSSI threshold of the candidate AP, indicating |
| 4755 |
* the driver to trigger roam only to the candidate AP with RSSI |
| 4756 |
* better than this threshold. If RSSI thresholds for candidate APs found |
| 4757 |
* in the 2.4 GHz, 5 GHz, and 6 GHz bands are configured separately using |
| 4758 |
* QCA_ATTR_ROAM_CONTROL_CANDIDATE_RSSI_THRESHOLD_2P4GHZ, |
| 4759 |
* QCA_ATTR_ROAM_CONTROL_CANDIDATE_RSSI_THRESHOLD_5GHZ, and/or |
| 4760 |
* QCA_ATTR_ROAM_CONTROL_CANDIDATE_RSSI_THRESHOLD_6GHZ, those values will |
| 4761 |
* take precedence over the value configured using the |
| 4762 |
* QCA_ATTR_ROAM_CONTROL_CANDIDATE_RSSI_THRESHOLD attribute. |
| 4763 |
* |
| 4764 |
* @QCA_ATTR_ROAM_CONTROL_USER_REASON: Unsigned 32-bit value. Represents the |
| 4765 |
* user defined reason code to be sent to the AP in response to AP's |
| 4766 |
* request to trigger the roam if the roaming cannot be triggered. |
| 4767 |
* Applies to all the scenarios of AP assisted roaming (e.g., BTM). |
| 4768 |
* |
| 4769 |
* @QCA_ATTR_ROAM_CONTROL_SCAN_SCHEME_TRIGGERS: Unsigned 32-bit value. |
| 4770 |
* Carries a bitmap of the roam triggers specified in |
| 4771 |
* enum qca_vendor_roam_triggers. |
| 4772 |
* Represents the roam triggers for which the specific scan scheme from |
| 4773 |
* enum qca_roam_scan_scheme has to be applied. |
| 4774 |
* It's an optional attribute. If this attribute is not configured, but |
| 4775 |
* QCA_ATTR_ROAM_CONTROL_SCAN_SCHEME is specified, the scan scheme |
| 4776 |
* specified through QCA_ATTR_ROAM_CONTROL_SCAN_SCHEME is applicable for |
| 4777 |
* all the roams. |
| 4778 |
* If both QCA_ATTR_ROAM_CONTROL_SCAN_SCHEME and |
| 4779 |
* QCA_ATTR_ROAM_CONTROL_SCAN_SCHEME_TRIGGERS are not specified, the |
| 4780 |
* driver shall proceed with the default behavior. |
| 4781 |
* |
| 4782 |
* @QCA_ATTR_ROAM_CONTROL_CANDIDATE_RSSI_THRESHOLD_2P4GHZ: Signed 32-bit value |
| 4783 |
* in dBm, signifying the RSSI threshold of the candidate AP found in the |
| 4784 |
* 2.4 GHz band. The driver/firmware shall trigger roaming to the candidate |
| 4785 |
* AP found in the 2.4 GHz band only if its RSSI value is better than this |
| 4786 |
* threshold. Optional attribute. If this attribute is not included, the |
| 4787 |
* threshold value specified by the |
| 4788 |
* QCA_ATTR_ROAM_CONTROL_CANDIDATE_RSSI_THRESHOLD attribute shall be used. |
| 4789 |
* |
| 4790 |
* @QCA_ATTR_ROAM_CONTROL_CANDIDATE_RSSI_THRESHOLD_5GHZ: Signed 32-bit value in |
| 4791 |
* dBm, signifying the RSSI threshold of the candidate AP found in the 5 |
| 4792 |
* GHz band. The driver/firmware shall trigger roaming to the candidate AP |
| 4793 |
* found in the 5 GHz band only if its RSSI value is better than this |
| 4794 |
* threshold. Optional attribute. If this attribute is not included, the |
| 4795 |
* threshold value specified by tge |
| 4796 |
* QCA_ATTR_ROAM_CONTROL_CANDIDATE_RSSI_THRESHOLD attribute shall be used. |
| 4797 |
* |
| 4798 |
* @QCA_ATTR_ROAM_CONTROL_CANDIDATE_RSSI_THRESHOLD_6GHZ: Signed 32-bit value in |
| 4799 |
* dBm, signifying the RSSI threshold of the candidate AP found in the 6 |
| 4800 |
* GHz band. The driver/firmware shall trigger roaming to the candidate AP |
| 4801 |
* found in the 6 GHz band only if its RSSI value is better than this |
| 4802 |
* threshold. Optional attribute. If this attribute is not included, the |
| 4803 |
* threshold value specified by the |
| 4804 |
* QCA_ATTR_ROAM_CONTROL_CANDIDATE_RSSI_THRESHOLD attribute shall be used. |
| 4805 |
* |
| 4806 |
* @QCA_ATTR_ROAM_CONTROL_BAND_MASK: Unsigned 32-bit value. |
| 4807 |
* Carries bitmask value of bits from &enum qca_set_band and represents |
| 4808 |
* all the bands in which roaming is allowed. The configuration is valid |
| 4809 |
* until next disconnection. If this attribute is not present, the |
| 4810 |
* existing configuration shall be used. By default, roaming is allowed on |
| 4811 |
* all bands supported by the local device. When the value is set to |
| 4812 |
* %QCA_SETBAND_AUTO, all supported bands shall be enabled. |
| 4813 |
* |
| 4814 |
* @QCA_ATTR_ROAM_CONTROL_ACTIVE_CH_DWELL_TIME: u16 value in milliseconds. |
| 4815 |
* Optional parameter. Scan dwell time for active channels in the 2.4/5 GHz |
| 4816 |
* bands. If this attribute is not configured, the driver shall proceed |
| 4817 |
* with default behavior. |
| 4818 |
* |
| 4819 |
* @QCA_ATTR_ROAM_CONTROL_PASSIVE_CH_DWELL_TIME: u16 value in milliseconds. |
| 4820 |
* Optional parameter. Scan dwell time for passive channels in the 5 GHz |
| 4821 |
* band. If this attribute is not configured, the driver shall proceed with |
| 4822 |
* default behavior. |
| 4823 |
* |
| 4824 |
* @QCA_ATTR_ROAM_CONTROL_HOME_CHANNEL_TIME: u16 value in milliseconds. |
| 4825 |
* Optional parameter. The minimum duration to stay on the connected AP |
| 4826 |
* channel during the channel scanning. If this attribute is not |
| 4827 |
* configured, the driver shall proceed with default behavior. |
| 4828 |
* |
| 4829 |
* @QCA_ATTR_ROAM_CONTROL_MAXIMUM_AWAY_TIME: u16 value in milliseconds. |
| 4830 |
* Optional parameter. The maximum duration for which the radio can scan |
| 4831 |
* foreign channels consecutively without coming back to home channel. If |
| 4832 |
* this attribute is not configured, the driver shall proceed with default |
| 4833 |
* behavior. |
| 4834 |
* |
| 4835 |
* @QCA_ATTR_ROAM_CONTROL_SCAN_6G_PSC_DWELL_TIME: u16 value in milliseconds. |
| 4836 |
* Optional parameter. Scan dwell time for 6G Preferred Scanning Channels. |
| 4837 |
* If this attribute is not configured, the driver shall proceed with |
| 4838 |
* default behavior. |
| 4839 |
* |
| 4840 |
* @QCA_ATTR_ROAM_CONTROL_SCAN_6G_NON_PSC_DWELL_TIME: u16 value in milliseconds. |
| 4841 |
* Optional parameter. Scan dwell time for 6G Non Preferred Scanning |
| 4842 |
* Channels. If this attribute is not configured, the driver shall proceed |
| 4843 |
* with default behavior. |
| 4844 |
*/ |
| 4845 |
enum qca_vendor_attr_roam_control { |
| 4846 |
QCA_ATTR_ROAM_CONTROL_ENABLE = 1, |
| 4847 |
QCA_ATTR_ROAM_CONTROL_STATUS = 2, |
| 4848 |
QCA_ATTR_ROAM_CONTROL_CLEAR_ALL = 3, |
| 4849 |
QCA_ATTR_ROAM_CONTROL_FREQ_LIST_SCHEME= 4, |
| 4850 |
QCA_ATTR_ROAM_CONTROL_SCAN_PERIOD = 5, |
| 4851 |
QCA_ATTR_ROAM_CONTROL_FULL_SCAN_PERIOD = 6, |
| 4852 |
QCA_ATTR_ROAM_CONTROL_TRIGGERS = 7, |
| 4853 |
QCA_ATTR_ROAM_CONTROL_SELECTION_CRITERIA = 8, |
| 4854 |
QCA_ATTR_ROAM_CONTROL_SCAN_SCHEME = 9, |
| 4855 |
QCA_ATTR_ROAM_CONTROL_CONNECTED_RSSI_THRESHOLD = 10, |
| 4856 |
QCA_ATTR_ROAM_CONTROL_CANDIDATE_RSSI_THRESHOLD = 11, |
| 4857 |
QCA_ATTR_ROAM_CONTROL_USER_REASON = 12, |
| 4858 |
QCA_ATTR_ROAM_CONTROL_SCAN_SCHEME_TRIGGERS = 13, |
| 4859 |
QCA_ATTR_ROAM_CONTROL_CANDIDATE_RSSI_THRESHOLD_2P4GHZ = 14, |
| 4860 |
QCA_ATTR_ROAM_CONTROL_CANDIDATE_RSSI_THRESHOLD_5GHZ = 15, |
| 4861 |
QCA_ATTR_ROAM_CONTROL_CANDIDATE_RSSI_THRESHOLD_6GHZ = 16, |
| 4862 |
QCA_ATTR_ROAM_CONTROL_BAND_MASK = 17, |
| 4863 |
QCA_ATTR_ROAM_CONTROL_ACTIVE_CH_DWELL_TIME = 18, |
| 4864 |
QCA_ATTR_ROAM_CONTROL_PASSIVE_CH_DWELL_TIME = 19, |
| 4865 |
QCA_ATTR_ROAM_CONTROL_HOME_CHANNEL_TIME = 20, |
| 4866 |
QCA_ATTR_ROAM_CONTROL_MAXIMUM_AWAY_TIME = 21, |
| 4867 |
QCA_ATTR_ROAM_CONTROL_SCAN_6G_PSC_DWELL_TIME = 22, |
| 4868 |
QCA_ATTR_ROAM_CONTROL_SCAN_6G_NON_PSC_DWELL_TIME = 23, |
| 4869 |
|
| 4870 |
/* keep last */ |
| 4871 |
QCA_ATTR_ROAM_CONTROL_AFTER_LAST, |
| 4872 |
QCA_ATTR_ROAM_CONTROL_MAX = |
| 4873 |
QCA_ATTR_ROAM_CONTROL_AFTER_LAST - 1, |
| 4874 |
}; |
| 4875 |
|
| 4876 |
/* |
| 4877 |
* enum qca_wlan_vendor_attr_roaming_config_params: Attributes for data used by |
| 4878 |
* QCA_NL80211_VENDOR_SUBCMD_ROAM sub command. |
| 4879 |
* |
| 4880 |
* @QCA_WLAN_VENDOR_ATTR_ROAMING_SUBCMD: Unsigned 32-bit value. |
| 4881 |
* Represents the different roam sub commands referred by |
| 4882 |
* enum qca_wlan_vendor_roaming_subcmd. |
| 4883 |
* |
| 4884 |
* @QCA_WLAN_VENDOR_ATTR_ROAMING_REQ_ID: Unsigned 32-bit value. |
| 4885 |
* Represents the Request ID for the specific set of commands. |
| 4886 |
* This also helps to map specific set of commands to the respective |
| 4887 |
* ID / client. e.g., helps to identify the user entity configuring the |
| 4888 |
* ignored BSSIDs and accordingly clear the respective ones with the |
| 4889 |
* matching ID. |
| 4890 |
* |
| 4891 |
* @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_WHITE_LIST_SSID_NUM_NETWORKS: Unsigned |
| 4892 |
* 32-bit value.Represents the number of whitelist SSIDs configured. |
| 4893 |
* |
| 4894 |
* @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_WHITE_LIST_SSID_LIST: Nested attribute |
| 4895 |
* to carry the list of Whitelist SSIDs. |
| 4896 |
* |
| 4897 |
* @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_WHITE_LIST_SSID: SSID (binary attribute, |
| 4898 |
* 0..32 octets). Represents the white list SSID. Whitelist SSIDs |
| 4899 |
* represent the list of SSIDs to which the firmware/driver can consider |
| 4900 |
* to roam to. |
| 4901 |
* |
| 4902 |
* The following PARAM_A_BAND_XX attributes are applied to 5GHz BSSIDs when |
| 4903 |
* comparing with a 2.4GHz BSSID. They are not applied when comparing two |
| 4904 |
* 5GHz BSSIDs.The following attributes are set through the Roaming SUBCMD - |
| 4905 |
* QCA_WLAN_VENDOR_ROAMING_SUBCMD_SET_GSCAN_ROAM_PARAMS. |
| 4906 |
* |
| 4907 |
* @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_A_BAND_BOOST_THRESHOLD: Signed 32-bit |
| 4908 |
* value, RSSI threshold above which 5GHz RSSI is favored. |
| 4909 |
* |
| 4910 |
* @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_A_BAND_PENALTY_THRESHOLD: Signed 32-bit |
| 4911 |
* value, RSSI threshold below which 5GHz RSSI is penalized. |
| 4912 |
* |
| 4913 |
* @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_A_BAND_BOOST_FACTOR: Unsigned 32-bit |
| 4914 |
* value, factor by which 5GHz RSSI is boosted. |
| 4915 |
* boost=(RSSI_measured-5GHz_boost_threshold)*5GHz_boost_factor |
| 4916 |
* |
| 4917 |
* @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_A_BAND_PENALTY_FACTOR: Unsigned 32-bit |
| 4918 |
* value, factor by which 5GHz RSSI is penalized. |
| 4919 |
* penalty=(5GHz_penalty_threshold-RSSI_measured)*5GHz_penalty_factor |
| 4920 |
* |
| 4921 |
* @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_A_BAND_MAX_BOOST: Unsigned 32-bit |
| 4922 |
* value, maximum boost that can be applied to a 5GHz RSSI. |
| 4923 |
* |
| 4924 |
* @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_LAZY_ROAM_HISTERESYS: Unsigned 32-bit |
| 4925 |
* value, boost applied to current BSSID to ensure the currently |
| 4926 |
* associated BSSID is favored so as to prevent ping-pong situations. |
| 4927 |
* |
| 4928 |
* @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_ALERT_ROAM_RSSI_TRIGGER: Signed 32-bit |
| 4929 |
* value, RSSI below which "Alert" roam is enabled. |
| 4930 |
* "Alert" mode roaming - firmware is "urgently" hunting for another BSSID |
| 4931 |
* because the RSSI is low, or because many successive beacons have been |
| 4932 |
* lost or other bad link conditions. |
| 4933 |
* |
| 4934 |
* @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_LAZY_ROAM_ENABLE: Unsigned 32-bit |
| 4935 |
* value. 1-Enable, 0-Disable. Represents "Lazy" mode, where |
| 4936 |
* firmware is hunting for a better BSSID or white listed SSID even though |
| 4937 |
* the RSSI of the link is good. The parameters enabling the roaming are |
| 4938 |
* configured through the PARAM_A_BAND_XX attrbutes. |
| 4939 |
* |
| 4940 |
* @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_BSSID_PREFS: Nested attribute, |
| 4941 |
* represents the BSSIDs preferred over others while evaluating them |
| 4942 |
* for the roaming. |
| 4943 |
* |
| 4944 |
* @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_LAZY_ROAM_NUM_BSSID: Unsigned |
| 4945 |
* 32-bit value. Represents the number of preferred BSSIDs set. |
| 4946 |
* |
| 4947 |
* @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_LAZY_ROAM_BSSID: 6-byte MAC |
| 4948 |
* address representing the BSSID to be preferred. |
| 4949 |
* |
| 4950 |
* @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_LAZY_ROAM_RSSI_MODIFIER: Signed |
| 4951 |
* 32-bit value, representing the modifier to be applied to the RSSI of |
| 4952 |
* the BSSID for the purpose of comparing it with other roam candidate. |
| 4953 |
* |
| 4954 |
* @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_BSSID_PARAMS: Nested attribute, |
| 4955 |
* represents the BSSIDs to get ignored for roaming. |
| 4956 |
* |
| 4957 |
* @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_BSSID_PARAMS_NUM_BSSID: Unsigned |
| 4958 |
* 32-bit value, represents the number of ignored BSSIDs. |
| 4959 |
* |
| 4960 |
* @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_BSSID_PARAMS_BSSID: 6-byte MAC |
| 4961 |
* address representing the ignored BSSID. |
| 4962 |
* |
| 4963 |
* @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_BSSID_PARAMS_HINT: Flag attribute, |
| 4964 |
* indicates this request to ignore the BSSID as a hint to the driver. The |
| 4965 |
* driver can select this BSSID in the worst case (when no other BSSIDs are |
| 4966 |
* better). |
| 4967 |
* |
| 4968 |
* @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_CONTROL: Nested attribute to |
| 4969 |
* set/get/clear the roam control config as |
| 4970 |
* defined @enum qca_vendor_attr_roam_control. |
| 4971 |
*/ |
| 4972 |
enum qca_wlan_vendor_attr_roaming_config_params { |
| 4973 |
QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_INVALID = 0, |
| 4974 |
|
| 4975 |
QCA_WLAN_VENDOR_ATTR_ROAMING_SUBCMD = 1, |
| 4976 |
QCA_WLAN_VENDOR_ATTR_ROAMING_REQ_ID = 2, |
| 4977 |
|
| 4978 |
/* Attributes for wifi_set_ssid_white_list */ |
| 4979 |
QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_WHITE_LIST_SSID_NUM_NETWORKS = 3, |
| 4980 |
QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_WHITE_LIST_SSID_LIST = 4, |
| 4981 |
QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_WHITE_LIST_SSID = 5, |
| 4982 |
|
| 4983 |
/* Attributes for set_roam_params */ |
| 4984 |
QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_A_BAND_BOOST_THRESHOLD = 6, |
| 4985 |
QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_A_BAND_PENALTY_THRESHOLD = 7, |
| 4986 |
QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_A_BAND_BOOST_FACTOR = 8, |
| 4987 |
QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_A_BAND_PENALTY_FACTOR = 9, |
| 4988 |
QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_A_BAND_MAX_BOOST = 10, |
| 4989 |
QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_LAZY_ROAM_HISTERESYS = 11, |
| 4990 |
QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_ALERT_ROAM_RSSI_TRIGGER = 12, |
| 4991 |
|
| 4992 |
/* Attribute for set_lazy_roam */ |
| 4993 |
QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_LAZY_ROAM_ENABLE = 13, |
| 4994 |
|
| 4995 |
/* Attribute for set_lazy_roam with preferences */ |
| 4996 |
QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_BSSID_PREFS = 14, |
| 4997 |
QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_LAZY_ROAM_NUM_BSSID = 15, |
| 4998 |
QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_LAZY_ROAM_BSSID = 16, |
| 4999 |
QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_LAZY_ROAM_RSSI_MODIFIER = 17, |
| 5000 |
|
| 5001 |
/* Attribute for setting ignored BSSID parameters */ |
| 5002 |
QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_BSSID_PARAMS = 18, |
| 5003 |
QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_BSSID_PARAMS_NUM_BSSID = 19, |
| 5004 |
QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_BSSID_PARAMS_BSSID = 20, |
| 5005 |
/* Flag attribute indicates this entry as a hint */ |
| 5006 |
QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_BSSID_PARAMS_HINT = 21, |
| 5007 |
|
| 5008 |
QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_CONTROL = 22, |
| 5009 |
|
| 5010 |
/* keep last */ |
| 5011 |
QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_AFTER_LAST, |
| 5012 |
QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_MAX = |
| 5013 |
QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_AFTER_LAST - 1, |
| 5014 |
}; |
| 5015 |
|
| 5016 |
/* |
| 5017 |
* enum qca_wlan_vendor_roaming_subcmd: Referred by |
| 5018 |
* QCA_WLAN_VENDOR_ATTR_ROAMING_SUBCMD. |
| 5019 |
* |
| 5020 |
* @QCA_WLAN_VENDOR_ROAMING_SUBCMD_SSID_WHITE_LIST: Sub command to |
| 5021 |
* configure the white list SSIDs. These are configured through |
| 5022 |
* the following attributes. |
| 5023 |
* QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_WHITE_LIST_SSID_NUM_NETWORKS, |
| 5024 |
* QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_WHITE_LIST_SSID_LIST, |
| 5025 |
* QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_WHITE_LIST_SSID |
| 5026 |
* |
| 5027 |
* @QCA_WLAN_VENDOR_ROAMING_SUBCMD_SET_GSCAN_ROAM_PARAMS: Sub command to |
| 5028 |
* configure the Roam params. These parameters are evaluated on the GScan |
| 5029 |
* results. Refers the attributes PARAM_A_BAND_XX above to configure the |
| 5030 |
* params. |
| 5031 |
* |
| 5032 |
* @QCA_WLAN_VENDOR_ROAMING_SUBCMD_SET_LAZY_ROAM: Sets the Lazy roam. Uses |
| 5033 |
* the attribute QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_LAZY_ROAM_ENABLE |
| 5034 |
* to enable/disable Lazy roam. |
| 5035 |
* |
| 5036 |
* @QCA_WLAN_VENDOR_ROAMING_SUBCMD_SET_BSSID_PREFS: Sets the BSSID |
| 5037 |
* preference. Contains the attribute |
| 5038 |
* QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_BSSID_PREFS to set the BSSID |
| 5039 |
* preference. |
| 5040 |
* |
| 5041 |
* @QCA_WLAN_VENDOR_ROAMING_SUBCMD_SET_BLACKLIST_BSSID: Sets the list of BSSIDs |
| 5042 |
* to ignore in roaming decision. Uses |
| 5043 |
* QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_BSSID_PARAMS to set the list. |
| 5044 |
* |
| 5045 |
* @QCA_WLAN_VENDOR_ROAMING_SUBCMD_CONTROL_SET: Command to set the |
| 5046 |
* roam control config to the driver with the attribute |
| 5047 |
* QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_CONTROL. |
| 5048 |
* |
| 5049 |
* @QCA_WLAN_VENDOR_ROAMING_SUBCMD_CONTROL_GET: Command to obtain the |
| 5050 |
* roam control config from driver with the attribute |
| 5051 |
* QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_CONTROL. |
| 5052 |
* For the get, the attribute for the configuration to be queried shall |
| 5053 |
* carry any of its acceptable value to the driver. In return, the driver |
| 5054 |
* shall send the configured values within the same attribute to the user |
| 5055 |
* space. |
| 5056 |
* |
| 5057 |
* @QCA_WLAN_VENDOR_ROAMING_SUBCMD_CONTROL_CLEAR: Command to clear the |
| 5058 |
* roam control config in the driver with the attribute |
| 5059 |
* QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_CONTROL. |
| 5060 |
* The driver shall continue with its default roaming behavior when data |
| 5061 |
* corresponding to an attribute is cleared. |
| 5062 |
*/ |
| 5063 |
enum qca_wlan_vendor_roaming_subcmd { |
| 5064 |
QCA_WLAN_VENDOR_ROAMING_SUBCMD_INVALID = 0, |
| 5065 |
QCA_WLAN_VENDOR_ROAMING_SUBCMD_SSID_WHITE_LIST = 1, |
| 5066 |
QCA_WLAN_VENDOR_ROAMING_SUBCMD_SET_GSCAN_ROAM_PARAMS = 2, |
| 5067 |
QCA_WLAN_VENDOR_ROAMING_SUBCMD_SET_LAZY_ROAM = 3, |
| 5068 |
QCA_WLAN_VENDOR_ROAMING_SUBCMD_SET_BSSID_PREFS = 4, |
| 5069 |
QCA_WLAN_VENDOR_ROAMING_SUBCMD_SET_BSSID_PARAMS = 5, |
| 5070 |
QCA_WLAN_VENDOR_ROAMING_SUBCMD_SET_BLACKLIST_BSSID = 6, |
| 5071 |
QCA_WLAN_VENDOR_ROAMING_SUBCMD_CONTROL_SET = 7, |
| 5072 |
QCA_WLAN_VENDOR_ROAMING_SUBCMD_CONTROL_GET = 8, |
| 5073 |
QCA_WLAN_VENDOR_ROAMING_SUBCMD_CONTROL_CLEAR = 9, |
| 5074 |
}; |
| 5075 |
|
| 5076 |
enum qca_wlan_vendor_attr_gscan_config_params { |
| 5077 |
QCA_WLAN_VENDOR_ATTR_GSCAN_SUBCMD_CONFIG_PARAM_INVALID = 0, |
| 5078 |
|
| 5079 |
/* Unsigned 32-bit value */ |
| 5080 |
QCA_WLAN_VENDOR_ATTR_GSCAN_SUBCMD_CONFIG_PARAM_REQUEST_ID = 1, |
| 5081 |
|
| 5082 |
/* Attributes for data used by |
| 5083 |
* QCA_NL80211_VENDOR_SUBCMD_GSCAN_GET_VALID_CHANNELS sub command. |
| 5084 |
*/ |
| 5085 |
/* Unsigned 32-bit value */ |
| 5086 |
QCA_WLAN_VENDOR_ATTR_GSCAN_GET_VALID_CHANNELS_CONFIG_PARAM_WIFI_BAND |
| 5087 |
= 2, |
| 5088 |
/* Unsigned 32-bit value */ |
| 5089 |
QCA_WLAN_VENDOR_ATTR_GSCAN_GET_VALID_CHANNELS_CONFIG_PARAM_MAX_CHANNELS |
| 5090 |
= 3, |
| 5091 |
|
| 5092 |
/* Attributes for input params used by |
| 5093 |
* QCA_NL80211_VENDOR_SUBCMD_GSCAN_START sub command. |
| 5094 |
*/ |
| 5095 |
|
| 5096 |
/* Unsigned 32-bit value; channel frequency */ |
| 5097 |
QCA_WLAN_VENDOR_ATTR_GSCAN_CHANNEL_SPEC_CHANNEL = 4, |
| 5098 |
/* Unsigned 32-bit value; dwell time in ms. */ |
| 5099 |
QCA_WLAN_VENDOR_ATTR_GSCAN_CHANNEL_SPEC_DWELL_TIME = 5, |
| 5100 |
/* Unsigned 8-bit value; 0: active; 1: passive; N/A for DFS */ |
| 5101 |
QCA_WLAN_VENDOR_ATTR_GSCAN_CHANNEL_SPEC_PASSIVE = 6, |
| 5102 |
/* Unsigned 8-bit value; channel class */ |
| 5103 |
QCA_WLAN_VENDOR_ATTR_GSCAN_CHANNEL_SPEC_CLASS = 7, |
| 5104 |
|
| 5105 |
/* Unsigned 8-bit value; bucket index, 0 based */ |
| 5106 |
QCA_WLAN_VENDOR_ATTR_GSCAN_BUCKET_SPEC_INDEX = 8, |
| 5107 |
/* Unsigned 8-bit value; band. */ |
| 5108 |
QCA_WLAN_VENDOR_ATTR_GSCAN_BUCKET_SPEC_BAND = 9, |
| 5109 |
/* Unsigned 32-bit value; desired period, in ms. */ |
| 5110 |
QCA_WLAN_VENDOR_ATTR_GSCAN_BUCKET_SPEC_PERIOD = 10, |
| 5111 |
/* Unsigned 8-bit value; report events semantics. */ |
| 5112 |
QCA_WLAN_VENDOR_ATTR_GSCAN_BUCKET_SPEC_REPORT_EVENTS = 11, |
| 5113 |
/* Unsigned 32-bit value. Followed by a nested array of |
| 5114 |
* GSCAN_CHANNEL_SPEC_* attributes. |
| 5115 |
*/ |
| 5116 |
QCA_WLAN_VENDOR_ATTR_GSCAN_BUCKET_SPEC_NUM_CHANNEL_SPECS = 12, |
| 5117 |
|
| 5118 |
/* Array of QCA_WLAN_VENDOR_ATTR_GSCAN_CHANNEL_SPEC_* attributes. |
| 5119 |
* Array size: QCA_WLAN_VENDOR_ATTR_GSCAN_BUCKET_SPEC_NUM_CHANNEL_SPECS |
| 5120 |
*/ |
| 5121 |
QCA_WLAN_VENDOR_ATTR_GSCAN_CHANNEL_SPEC = 13, |
| 5122 |
|
| 5123 |
/* Unsigned 32-bit value; base timer period in ms. */ |
| 5124 |
QCA_WLAN_VENDOR_ATTR_GSCAN_SCAN_CMD_PARAMS_BASE_PERIOD = 14, |
| 5125 |
/* Unsigned 32-bit value; number of APs to store in each scan in the |
| 5126 |
* BSSID/RSSI history buffer (keep the highest RSSI APs). |
| 5127 |
*/ |
| 5128 |
QCA_WLAN_VENDOR_ATTR_GSCAN_SCAN_CMD_PARAMS_MAX_AP_PER_SCAN = 15, |
| 5129 |
/* Unsigned 8-bit value; in %, when scan buffer is this much full, wake |
| 5130 |
* up AP. |
| 5131 |
*/ |
| 5132 |
QCA_WLAN_VENDOR_ATTR_GSCAN_SCAN_CMD_PARAMS_REPORT_THRESHOLD_PERCENT |
| 5133 |
= 16, |
| 5134 |
|
| 5135 |
/* Unsigned 8-bit value; number of scan bucket specs; followed by a |
| 5136 |
* nested array of_GSCAN_BUCKET_SPEC_* attributes and values. The size |
| 5137 |
* of the array is determined by NUM_BUCKETS. |
| 5138 |
*/ |
| 5139 |
QCA_WLAN_VENDOR_ATTR_GSCAN_SCAN_CMD_PARAMS_NUM_BUCKETS = 17, |
| 5140 |
|
| 5141 |
/* Array of QCA_WLAN_VENDOR_ATTR_GSCAN_BUCKET_SPEC_* attributes. |
| 5142 |
* Array size: QCA_WLAN_VENDOR_ATTR_GSCAN_SCAN_CMD_PARAMS_NUM_BUCKETS |
| 5143 |
*/ |
| 5144 |
QCA_WLAN_VENDOR_ATTR_GSCAN_BUCKET_SPEC = 18, |
| 5145 |
|
| 5146 |
/* Unsigned 8-bit value */ |
| 5147 |
QCA_WLAN_VENDOR_ATTR_GSCAN_GET_CACHED_SCAN_RESULTS_CONFIG_PARAM_FLUSH |
| 5148 |
= 19, |
| 5149 |
/* Unsigned 32-bit value; maximum number of results to be returned. */ |
| 5150 |
QCA_WLAN_VENDOR_ATTR_GSCAN_GET_CACHED_SCAN_RESULTS_CONFIG_PARAM_MAX |
| 5151 |
= 20, |
| 5152 |
|
| 5153 |
/* An array of 6 x unsigned 8-bit value */ |
| 5154 |
QCA_WLAN_VENDOR_ATTR_GSCAN_AP_THRESHOLD_PARAM_BSSID = 21, |
| 5155 |
/* Signed 32-bit value */ |
| 5156 |
QCA_WLAN_VENDOR_ATTR_GSCAN_AP_THRESHOLD_PARAM_RSSI_LOW = 22, |
| 5157 |
/* Signed 32-bit value */ |
| 5158 |
QCA_WLAN_VENDOR_ATTR_GSCAN_AP_THRESHOLD_PARAM_RSSI_HIGH = 23, |
| 5159 |
/* Unsigned 32-bit value */ |
| 5160 |
QCA_WLAN_VENDOR_ATTR_GSCAN_AP_THRESHOLD_PARAM_CHANNEL = 24, |
| 5161 |
|
| 5162 |
/* Number of hotlist APs as unsigned 32-bit value, followed by a nested |
| 5163 |
* array of AP_THRESHOLD_PARAM attributes and values. The size of the |
| 5164 |
* array is determined by NUM_AP. |
| 5165 |
*/ |
| 5166 |
QCA_WLAN_VENDOR_ATTR_GSCAN_BSSID_HOTLIST_PARAMS_NUM_AP = 25, |
| 5167 |
|
| 5168 |
/* Array of QCA_WLAN_VENDOR_ATTR_GSCAN_AP_THRESHOLD_PARAM_* attributes. |
| 5169 |
* Array size: QCA_WLAN_VENDOR_ATTR_GSCAN_BUCKET_SPEC_NUM_CHANNEL_SPECS |
| 5170 |
*/ |
| 5171 |
QCA_WLAN_VENDOR_ATTR_GSCAN_AP_THRESHOLD_PARAM = 26, |
| 5172 |
|
| 5173 |
/* Unsigned 32-bit value; number of samples for averaging RSSI. */ |
| 5174 |
QCA_WLAN_VENDOR_ATTR_GSCAN_SIGNIFICANT_CHANGE_PARAMS_RSSI_SAMPLE_SIZE |
| 5175 |
= 27, |
| 5176 |
/* Unsigned 32-bit value; number of samples to confirm AP loss. */ |
| 5177 |
QCA_WLAN_VENDOR_ATTR_GSCAN_SIGNIFICANT_CHANGE_PARAMS_LOST_AP_SAMPLE_SIZE |
| 5178 |
= 28, |
| 5179 |
/* Unsigned 32-bit value; number of APs breaching threshold. */ |
| 5180 |
QCA_WLAN_VENDOR_ATTR_GSCAN_SIGNIFICANT_CHANGE_PARAMS_MIN_BREACHING = 29, |
| 5181 |
/* Unsigned 32-bit value; number of APs. Followed by an array of |
| 5182 |
* AP_THRESHOLD_PARAM attributes. Size of the array is NUM_AP. |
| 5183 |
*/ |
| 5184 |
QCA_WLAN_VENDOR_ATTR_GSCAN_SIGNIFICANT_CHANGE_PARAMS_NUM_AP = 30, |
| 5185 |
/* Unsigned 32-bit value; number of samples to confirm AP loss. */ |
| 5186 |
QCA_WLAN_VENDOR_ATTR_GSCAN_BSSID_HOTLIST_PARAMS_LOST_AP_SAMPLE_SIZE |
| 5187 |
= 31, |
| 5188 |
/* Unsigned 32-bit value. If max_period is non zero or different than |
| 5189 |
* period, then this bucket is an exponential backoff bucket. |
| 5190 |
*/ |
| 5191 |
QCA_WLAN_VENDOR_ATTR_GSCAN_BUCKET_SPEC_MAX_PERIOD = 32, |
| 5192 |
/* Unsigned 32-bit value. */ |
| 5193 |
QCA_WLAN_VENDOR_ATTR_GSCAN_BUCKET_SPEC_BASE = 33, |
| 5194 |
/* Unsigned 32-bit value. For exponential back off bucket, number of |
| 5195 |
* scans to perform for a given period. |
| 5196 |
*/ |
| 5197 |
QCA_WLAN_VENDOR_ATTR_GSCAN_BUCKET_SPEC_STEP_COUNT = 34, |
| 5198 |
/* Unsigned 8-bit value; in number of scans, wake up AP after these |
| 5199 |
* many scans. |
| 5200 |
*/ |
| 5201 |
QCA_WLAN_VENDOR_ATTR_GSCAN_SCAN_CMD_PARAMS_REPORT_THRESHOLD_NUM_SCANS |
| 5202 |
= 35, |
| 5203 |
|
| 5204 |
/* Attributes for data used by |
| 5205 |
* QCA_NL80211_VENDOR_SUBCMD_GSCAN_SET_SSID_HOTLIST sub command. |
| 5206 |
*/ |
| 5207 |
/* Unsigned 3-2bit value; number of samples to confirm SSID loss. */ |
| 5208 |
QCA_WLAN_VENDOR_ATTR_GSCAN_SSID_HOTLIST_PARAMS_LOST_SSID_SAMPLE_SIZE |
| 5209 |
= 36, |
| 5210 |
/* Number of hotlist SSIDs as unsigned 32-bit value, followed by a |
| 5211 |
* nested array of SSID_THRESHOLD_PARAM_* attributes and values. The |
| 5212 |
* size of the array is determined by NUM_SSID. |
| 5213 |
*/ |
| 5214 |
QCA_WLAN_VENDOR_ATTR_GSCAN_SSID_HOTLIST_PARAMS_NUM_SSID = 37, |
| 5215 |
/* Array of QCA_WLAN_VENDOR_ATTR_GSCAN_SSID_THRESHOLD_PARAM_* |
| 5216 |
* attributes. |
| 5217 |
* Array size: QCA_WLAN_VENDOR_ATTR_GSCAN_SSID_HOTLIST_PARAMS_NUM_SSID |
| 5218 |
*/ |
| 5219 |
QCA_WLAN_VENDOR_ATTR_GSCAN_SSID_THRESHOLD_PARAM = 38, |
| 5220 |
|
| 5221 |
/* An array of 33 x unsigned 8-bit value; NULL terminated SSID */ |
| 5222 |
QCA_WLAN_VENDOR_ATTR_GSCAN_SSID_THRESHOLD_PARAM_SSID = 39, |
| 5223 |
/* Unsigned 8-bit value */ |
| 5224 |
QCA_WLAN_VENDOR_ATTR_GSCAN_SSID_THRESHOLD_PARAM_BAND = 40, |
| 5225 |
/* Signed 32-bit value */ |
| 5226 |
QCA_WLAN_VENDOR_ATTR_GSCAN_SSID_THRESHOLD_PARAM_RSSI_LOW = 41, |
| 5227 |
/* Signed 32-bit value */ |
| 5228 |
QCA_WLAN_VENDOR_ATTR_GSCAN_SSID_THRESHOLD_PARAM_RSSI_HIGH = 42, |
| 5229 |
/* Unsigned 32-bit value; a bitmask with additional gscan config flag. |
| 5230 |
*/ |
| 5231 |
QCA_WLAN_VENDOR_ATTR_GSCAN_CONFIGURATION_FLAGS = 43, |
| 5232 |
|
| 5233 |
/* keep last */ |
| 5234 |
QCA_WLAN_VENDOR_ATTR_GSCAN_SUBCMD_CONFIG_PARAM_AFTER_LAST, |
| 5235 |
QCA_WLAN_VENDOR_ATTR_GSCAN_SUBCMD_CONFIG_PARAM_MAX = |
| 5236 |
QCA_WLAN_VENDOR_ATTR_GSCAN_SUBCMD_CONFIG_PARAM_AFTER_LAST - 1, |
| 5237 |
}; |
| 5238 |
|
| 5239 |
enum qca_wlan_vendor_attr_gscan_results { |
| 5240 |
QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_INVALID = 0, |
| 5241 |
|
| 5242 |
/* Unsigned 32-bit value; must match the request Id supplied by |
| 5243 |
* Wi-Fi HAL in the corresponding subcmd NL msg. |
| 5244 |
*/ |
| 5245 |
QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_REQUEST_ID = 1, |
| 5246 |
|
| 5247 |
/* Unsigned 32-bit value; used to indicate the status response from |
| 5248 |
* firmware/driver for the vendor sub-command. |
| 5249 |
*/ |
| 5250 |
QCA_WLAN_VENDOR_ATTR_GSCAN_STATUS = 2, |
| 5251 |
|
| 5252 |
/* GSCAN Valid Channels attributes */ |
| 5253 |
/* Unsigned 32bit value; followed by a nested array of CHANNELS. */ |
| 5254 |
QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_NUM_CHANNELS = 3, |
| 5255 |
/* An array of NUM_CHANNELS x unsigned 32-bit value integers |
| 5256 |
* representing channel numbers. |
| 5257 |
*/ |
| 5258 |
QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_CHANNELS = 4, |
| 5259 |
|
| 5260 |
/* GSCAN Capabilities attributes */ |
| 5261 |
/* Unsigned 32-bit value */ |
| 5262 |
QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_CAPABILITIES_MAX_SCAN_CACHE_SIZE = 5, |
| 5263 |
/* Unsigned 32-bit value */ |
| 5264 |
QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_CAPABILITIES_MAX_SCAN_BUCKETS = 6, |
| 5265 |
/* Unsigned 32-bit value */ |
| 5266 |
QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_CAPABILITIES_MAX_AP_CACHE_PER_SCAN |
| 5267 |
= 7, |
| 5268 |
/* Unsigned 32-bit value */ |
| 5269 |
QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_CAPABILITIES_MAX_RSSI_SAMPLE_SIZE |
| 5270 |
= 8, |
| 5271 |
/* Signed 32-bit value */ |
| 5272 |
QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_CAPABILITIES_MAX_SCAN_REPORTING_THRESHOLD |
| 5273 |
= 9, |
| 5274 |
/* Unsigned 32-bit value */ |
| 5275 |
QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_CAPABILITIES_MAX_HOTLIST_BSSIDS = 10, |
| 5276 |
/* Unsigned 32-bit value */ |
| 5277 |
QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_CAPABILITIES_MAX_SIGNIFICANT_WIFI_CHANGE_APS |
| 5278 |
= 11, |
| 5279 |
/* Unsigned 32-bit value */ |
| 5280 |
QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_CAPABILITIES_MAX_BSSID_HISTORY_ENTRIES |
| 5281 |
= 12, |
| 5282 |
|
| 5283 |
/* GSCAN Attributes used with |
| 5284 |
* QCA_NL80211_VENDOR_SUBCMD_GSCAN_SCAN_RESULTS_AVAILABLE sub-command. |
| 5285 |
*/ |
| 5286 |
|
| 5287 |
/* Unsigned 32-bit value */ |
| 5288 |
QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_NUM_RESULTS_AVAILABLE = 13, |
| 5289 |
|
| 5290 |
/* GSCAN attributes used with |
| 5291 |
* QCA_NL80211_VENDOR_SUBCMD_GSCAN_FULL_SCAN_RESULT sub-command. |
| 5292 |
*/ |
| 5293 |
|
| 5294 |
/* An array of NUM_RESULTS_AVAILABLE x |
| 5295 |
* QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_SCAN_RESULT_* |
| 5296 |
*/ |
| 5297 |
QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_LIST = 14, |
| 5298 |
|
| 5299 |
/* Unsigned 64-bit value; age of sample at the time of retrieval */ |
| 5300 |
QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_SCAN_RESULT_TIME_STAMP = 15, |
| 5301 |
/* 33 x unsigned 8-bit value; NULL terminated SSID */ |
| 5302 |
QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_SCAN_RESULT_SSID = 16, |
| 5303 |
/* An array of 6 x unsigned 8-bit value */ |
| 5304 |
QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_SCAN_RESULT_BSSID = 17, |
| 5305 |
/* Unsigned 32-bit value; channel frequency in MHz */ |
| 5306 |
QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_SCAN_RESULT_CHANNEL = 18, |
| 5307 |
/* Signed 32-bit value */ |
| 5308 |
QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_SCAN_RESULT_RSSI = 19, |
| 5309 |
/* Unsigned 32-bit value */ |
| 5310 |
QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_SCAN_RESULT_RTT = 20, |
| 5311 |
/* Unsigned 32-bit value */ |
| 5312 |
QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_SCAN_RESULT_RTT_SD = 21, |
| 5313 |
/* Unsigned 16-bit value */ |
| 5314 |
QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_SCAN_RESULT_BEACON_PERIOD = 22, |
| 5315 |
/* Unsigned 16-bit value */ |
| 5316 |
QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_SCAN_RESULT_CAPABILITY = 23, |
| 5317 |
/* Unsigned 32-bit value; size of the IE DATA blob */ |
| 5318 |
QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_SCAN_RESULT_IE_LENGTH = 24, |
| 5319 |
/* An array of IE_LENGTH x unsigned 8-bit value; blob of all the |
| 5320 |
* information elements found in the beacon; this data should be a |
| 5321 |
* packed list of wifi_information_element objects, one after the |
| 5322 |
* other. |
| 5323 |
*/ |
| 5324 |
QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_SCAN_RESULT_IE_DATA = 25, |
| 5325 |
|
| 5326 |
/* Unsigned 8-bit value; set by driver to indicate more scan results are |
| 5327 |
* available. |
| 5328 |
*/ |
| 5329 |
QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_SCAN_RESULT_MORE_DATA = 26, |
| 5330 |
|
| 5331 |
/* GSCAN attributes for |
| 5332 |
* QCA_NL80211_VENDOR_SUBCMD_GSCAN_SCAN_EVENT sub-command. |
| 5333 |
*/ |
| 5334 |
/* Unsigned 8-bit value */ |
| 5335 |
QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_SCAN_EVENT_TYPE = 27, |
| 5336 |
/* Unsigned 32-bit value */ |
| 5337 |
QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_SCAN_EVENT_STATUS = 28, |
| 5338 |
|
| 5339 |
/* GSCAN attributes for |
| 5340 |
* QCA_NL80211_VENDOR_SUBCMD_GSCAN_HOTLIST_AP_FOUND sub-command. |
| 5341 |
*/ |
| 5342 |
/* Use attr QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_NUM_RESULTS_AVAILABLE |
| 5343 |
* to indicate number of results. |
| 5344 |
* Also, use QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_LIST to indicate the |
| 5345 |
* list of results. |
| 5346 |
*/ |
| 5347 |
|
| 5348 |
/* GSCAN attributes for |
| 5349 |
* QCA_NL80211_VENDOR_SUBCMD_GSCAN_SIGNIFICANT_CHANGE sub-command. |
| 5350 |
*/ |
| 5351 |
/* An array of 6 x unsigned 8-bit value */ |
| 5352 |
QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_SIGNIFICANT_CHANGE_RESULT_BSSID = 29, |
| 5353 |
/* Unsigned 32-bit value */ |
| 5354 |
QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_SIGNIFICANT_CHANGE_RESULT_CHANNEL |
| 5355 |
= 30, |
| 5356 |
/* Unsigned 32-bit value. */ |
| 5357 |
QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_SIGNIFICANT_CHANGE_RESULT_NUM_RSSI |
| 5358 |
= 31, |
| 5359 |
/* A nested array of signed 32-bit RSSI values. Size of the array is |
| 5360 |
* determined by (NUM_RSSI of SIGNIFICANT_CHANGE_RESULT_NUM_RSSI. |
| 5361 |
*/ |
| 5362 |
QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_SIGNIFICANT_CHANGE_RESULT_RSSI_LIST |
| 5363 |
= 32, |
| 5364 |
|
| 5365 |
/* GSCAN attributes used with |
| 5366 |
* QCA_NL80211_VENDOR_SUBCMD_GSCAN_GET_CACHED_RESULTS sub-command. |
| 5367 |
*/ |
| 5368 |
/* Use attr QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_NUM_RESULTS_AVAILABLE |
| 5369 |
* to indicate number of gscan cached results returned. |
| 5370 |
* Also, use QCA_WLAN_VENDOR_ATTR_GSCAN_CACHED_RESULTS_LIST to indicate |
| 5371 |
* the list of gscan cached results. |
| 5372 |
*/ |
| 5373 |
|
| 5374 |
/* An array of NUM_RESULTS_AVAILABLE x |
| 5375 |
* QCA_NL80211_VENDOR_ATTR_GSCAN_CACHED_RESULTS_* |
| 5376 |
*/ |
| 5377 |
QCA_WLAN_VENDOR_ATTR_GSCAN_CACHED_RESULTS_LIST = 33, |
| 5378 |
/* Unsigned 32-bit value; a unique identifier for the scan unit. */ |
| 5379 |
QCA_WLAN_VENDOR_ATTR_GSCAN_CACHED_RESULTS_SCAN_ID = 34, |
| 5380 |
/* Unsigned 32-bit value; a bitmask w/additional information about scan. |
| 5381 |
*/ |
| 5382 |
QCA_WLAN_VENDOR_ATTR_GSCAN_CACHED_RESULTS_FLAGS = 35, |
| 5383 |
/* Use attr QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_NUM_RESULTS_AVAILABLE |
| 5384 |
* to indicate number of wifi scan results/bssids retrieved by the scan. |
| 5385 |
* Also, use QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_LIST to indicate the |
| 5386 |
* list of wifi scan results returned for each cached result block. |
| 5387 |
*/ |
| 5388 |
|
| 5389 |
/* GSCAN attributes for |
| 5390 |
* QCA_NL80211_VENDOR_SUBCMD_PNO_NETWORK_FOUND sub-command. |
| 5391 |
*/ |
| 5392 |
/* Use QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_NUM_RESULTS_AVAILABLE for |
| 5393 |
* number of results. |
| 5394 |
* Use QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_LIST to indicate the nested |
| 5395 |
* list of wifi scan results returned for each |
| 5396 |
* wifi_passpoint_match_result block. |
| 5397 |
* Array size: QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_NUM_RESULTS_AVAILABLE. |
| 5398 |
*/ |
| 5399 |
|
| 5400 |
/* GSCAN attributes for |
| 5401 |
* QCA_NL80211_VENDOR_SUBCMD_PNO_PASSPOINT_NETWORK_FOUND sub-command. |
| 5402 |
*/ |
| 5403 |
/* Unsigned 32-bit value */ |
| 5404 |
QCA_WLAN_VENDOR_ATTR_GSCAN_PNO_RESULTS_PASSPOINT_NETWORK_FOUND_NUM_MATCHES |
| 5405 |
= 36, |
| 5406 |
/* A nested array of |
| 5407 |
* QCA_WLAN_VENDOR_ATTR_GSCAN_PNO_RESULTS_PASSPOINT_MATCH_* |
| 5408 |
* attributes. Array size = |
| 5409 |
* *_ATTR_GSCAN_PNO_RESULTS_PASSPOINT_NETWORK_FOUND_NUM_MATCHES. |
| 5410 |
*/ |
| 5411 |
QCA_WLAN_VENDOR_ATTR_GSCAN_PNO_RESULTS_PASSPOINT_MATCH_RESULT_LIST = 37, |
| 5412 |
|
| 5413 |
/* Unsigned 32-bit value; network block id for the matched network */ |
| 5414 |
QCA_WLAN_VENDOR_ATTR_GSCAN_PNO_RESULTS_PASSPOINT_MATCH_ID = 38, |
| 5415 |
/* Use QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_LIST to indicate the nested |
| 5416 |
* list of wifi scan results returned for each |
| 5417 |
* wifi_passpoint_match_result block. |
| 5418 |
*/ |
| 5419 |
/* Unsigned 32-bit value */ |
| 5420 |
QCA_WLAN_VENDOR_ATTR_GSCAN_PNO_RESULTS_PASSPOINT_MATCH_ANQP_LEN = 39, |
| 5421 |
/* An array size of PASSPOINT_MATCH_ANQP_LEN of unsigned 8-bit values; |
| 5422 |
* ANQP data in the information_element format. |
| 5423 |
*/ |
| 5424 |
QCA_WLAN_VENDOR_ATTR_GSCAN_PNO_RESULTS_PASSPOINT_MATCH_ANQP = 40, |
| 5425 |
|
| 5426 |
/* Unsigned 32-bit value; a GSCAN Capabilities attribute. */ |
| 5427 |
QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_CAPABILITIES_MAX_HOTLIST_SSIDS = 41, |
| 5428 |
/* Unsigned 32-bit value; a GSCAN Capabilities attribute. */ |
| 5429 |
QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_CAPABILITIES_MAX_NUM_EPNO_NETS = 42, |
| 5430 |
/* Unsigned 32-bit value; a GSCAN Capabilities attribute. */ |
| 5431 |
QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_CAPABILITIES_MAX_NUM_EPNO_NETS_BY_SSID |
| 5432 |
= 43, |
| 5433 |
/* Unsigned 32-bit value; a GSCAN Capabilities attribute. */ |
| 5434 |
QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_CAPABILITIES_MAX_NUM_WHITELISTED_SSID |
| 5435 |
= 44, |
| 5436 |
|
| 5437 |
QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_BUCKETS_SCANNED = 45, |
| 5438 |
|
| 5439 |
/* Unsigned 32-bit value; a GSCAN Capabilities attribute. |
| 5440 |
* This is used to limit the maximum number of BSSIDs while sending |
| 5441 |
* the vendor command QCA_NL80211_VENDOR_SUBCMD_ROAM with subcmd |
| 5442 |
* QCA_WLAN_VENDOR_ROAMING_SUBCMD_SET_BLACKLIST_BSSID and attribute |
| 5443 |
* QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_BSSID_PARAMS_NUM_BSSID. |
| 5444 |
*/ |
| 5445 |
QCA_WLAN_VENDOR_ATTR_GSCAN_MAX_NUM_BLACKLISTED_BSSID = 46, |
| 5446 |
|
| 5447 |
/* keep last */ |
| 5448 |
QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_AFTER_LAST, |
| 5449 |
QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_MAX = |
| 5450 |
QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_AFTER_LAST - 1, |
| 5451 |
}; |
| 5452 |
|
| 5453 |
enum qca_wlan_vendor_attr_pno_config_params { |
| 5454 |
QCA_WLAN_VENDOR_ATTR_PNO_INVALID = 0, |
| 5455 |
/* Attributes for data used by |
| 5456 |
* QCA_NL80211_VENDOR_SUBCMD_PNO_SET_PASSPOINT_LIST sub command. |
| 5457 |
*/ |
| 5458 |
/* Unsigned 32-bit value */ |
| 5459 |
QCA_WLAN_VENDOR_ATTR_PNO_PASSPOINT_LIST_PARAM_NUM = 1, |
| 5460 |
/* Array of nested QCA_WLAN_VENDOR_ATTR_PNO_PASSPOINT_NETWORK_PARAM_* |
| 5461 |
* attributes. Array size = |
| 5462 |
* QCA_WLAN_VENDOR_ATTR_PNO_PASSPOINT_LIST_PARAM_NUM. |
| 5463 |
*/ |
| 5464 |
QCA_WLAN_VENDOR_ATTR_PNO_PASSPOINT_LIST_PARAM_NETWORK_ARRAY = 2, |
| 5465 |
|
| 5466 |
/* Unsigned 32-bit value */ |
| 5467 |
QCA_WLAN_VENDOR_ATTR_PNO_PASSPOINT_NETWORK_PARAM_ID = 3, |
| 5468 |
/* An array of 256 x unsigned 8-bit value; NULL terminated UTF-8 encoded |
| 5469 |
* realm, 0 if unspecified. |
| 5470 |
*/ |
| 5471 |
QCA_WLAN_VENDOR_ATTR_PNO_PASSPOINT_NETWORK_PARAM_REALM = 4, |
| 5472 |
/* An array of 16 x unsigned 32-bit value; roaming consortium ids to |
| 5473 |
* match, 0 if unspecified. |
| 5474 |
*/ |
| 5475 |
QCA_WLAN_VENDOR_ATTR_PNO_PASSPOINT_NETWORK_PARAM_ROAM_CNSRTM_ID = 5, |
| 5476 |
/* An array of 6 x unsigned 8-bit value; MCC/MNC combination, 0s if |
| 5477 |
* unspecified. |
| 5478 |
*/ |
| 5479 |
QCA_WLAN_VENDOR_ATTR_PNO_PASSPOINT_NETWORK_PARAM_ROAM_PLMN = 6, |
| 5480 |
|
| 5481 |
/* Attributes for data used by |
| 5482 |
* QCA_NL80211_VENDOR_SUBCMD_PNO_SET_LIST sub command. |
| 5483 |
*/ |
| 5484 |
/* Unsigned 32-bit value */ |
| 5485 |
QCA_WLAN_VENDOR_ATTR_PNO_SET_LIST_PARAM_NUM_NETWORKS = 7, |
| 5486 |
/* Array of nested |
| 5487 |
* QCA_WLAN_VENDOR_ATTR_PNO_SET_LIST_PARAM_EPNO_NETWORK_* |
| 5488 |
* attributes. Array size = |
| 5489 |
* QCA_WLAN_VENDOR_ATTR_PNO_SET_LIST_PARAM_NUM_NETWORKS. |
| 5490 |
*/ |
| 5491 |
QCA_WLAN_VENDOR_ATTR_PNO_SET_LIST_PARAM_EPNO_NETWORKS_LIST = 8, |
| 5492 |
/* An array of 33 x unsigned 8-bit value; NULL terminated SSID */ |
| 5493 |
QCA_WLAN_VENDOR_ATTR_PNO_SET_LIST_PARAM_EPNO_NETWORK_SSID = 9, |
| 5494 |
/* Signed 8-bit value; threshold for considering this SSID as found, |
| 5495 |
* required granularity for this threshold is 4 dBm to 8 dBm. |
| 5496 |
*/ |
| 5497 |
QCA_WLAN_VENDOR_ATTR_PNO_SET_LIST_PARAM_EPNO_NETWORK_RSSI_THRESHOLD |
| 5498 |
= 10, |
| 5499 |
/* Unsigned 8-bit value; WIFI_PNO_FLAG_XXX */ |
| 5500 |
QCA_WLAN_VENDOR_ATTR_PNO_SET_LIST_PARAM_EPNO_NETWORK_FLAGS = 11, |
| 5501 |
/* Unsigned 8-bit value; auth bit field for matching WPA IE */ |
| 5502 |
QCA_WLAN_VENDOR_ATTR_PNO_SET_LIST_PARAM_EPNO_NETWORK_AUTH_BIT = 12, |
| 5503 |
/* Unsigned 8-bit to indicate ePNO type; |
| 5504 |
* It takes values from qca_wlan_epno_type |
| 5505 |
*/ |
| 5506 |
QCA_WLAN_VENDOR_ATTR_PNO_SET_LIST_PARAM_EPNO_TYPE = 13, |
| 5507 |
|
| 5508 |
/* Nested attribute to send the channel list */ |
| 5509 |
QCA_WLAN_VENDOR_ATTR_PNO_SET_LIST_PARAM_EPNO_CHANNEL_LIST = 14, |
| 5510 |
|
| 5511 |
/* Unsigned 32-bit value; indicates the interval between PNO scan |
| 5512 |
* cycles in msec. |
| 5513 |
*/ |
| 5514 |
QCA_WLAN_VENDOR_ATTR_PNO_SET_LIST_PARAM_EPNO_SCAN_INTERVAL = 15, |
| 5515 |
QCA_WLAN_VENDOR_ATTR_EPNO_MIN5GHZ_RSSI = 16, |
| 5516 |
QCA_WLAN_VENDOR_ATTR_EPNO_MIN24GHZ_RSSI = 17, |
| 5517 |
QCA_WLAN_VENDOR_ATTR_EPNO_INITIAL_SCORE_MAX = 18, |
| 5518 |
QCA_WLAN_VENDOR_ATTR_EPNO_CURRENT_CONNECTION_BONUS = 19, |
| 5519 |
QCA_WLAN_VENDOR_ATTR_EPNO_SAME_NETWORK_BONUS = 20, |
| 5520 |
QCA_WLAN_VENDOR_ATTR_EPNO_SECURE_BONUS = 21, |
| 5521 |
QCA_WLAN_VENDOR_ATTR_EPNO_BAND5GHZ_BONUS = 22, |
| 5522 |
/* Unsigned 32-bit value, representing the PNO Request ID */ |
| 5523 |
QCA_WLAN_VENDOR_ATTR_PNO_CONFIG_REQUEST_ID = 23, |
| 5524 |
|
| 5525 |
/* keep last */ |
| 5526 |
QCA_WLAN_VENDOR_ATTR_PNO_AFTER_LAST, |
| 5527 |
QCA_WLAN_VENDOR_ATTR_PNO_MAX = |
| 5528 |
QCA_WLAN_VENDOR_ATTR_PNO_AFTER_LAST - 1, |
| 5529 |
}; |
| 5530 |
|
| 5531 |
/** |
| 5532 |
* qca_wlan_vendor_acs_select_reason: This represents the different reasons why |
| 5533 |
* the ACS has to be triggered. These values are used by |
| 5534 |
* QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_REASON and |
| 5535 |
* QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_REASON |
| 5536 |
*/ |
| 5537 |
enum qca_wlan_vendor_acs_select_reason { |
| 5538 |
/* Represents the reason that the ACS triggered during the AP start */ |
| 5539 |
QCA_WLAN_VENDOR_ACS_SELECT_REASON_INIT, |
| 5540 |
/* Represents the reason that DFS found with the current channel */ |
| 5541 |
QCA_WLAN_VENDOR_ACS_SELECT_REASON_DFS, |
| 5542 |
/* Represents the reason that LTE co-exist in the current band. */ |
| 5543 |
QCA_WLAN_VENDOR_ACS_SELECT_REASON_LTE_COEX, |
| 5544 |
/* Represents the reason that generic, uncategorized interference has |
| 5545 |
* been found in the current channel. |
| 5546 |
*/ |
| 5547 |
QCA_WLAN_VENDOR_ACS_SELECT_REASON_GENERIC_INTERFERENCE, |
| 5548 |
/* Represents the reason that excessive 802.11 interference has been |
| 5549 |
* found in the current channel. |
| 5550 |
*/ |
| 5551 |
QCA_WLAN_VENDOR_ACS_SELECT_REASON_80211_INTERFERENCE, |
| 5552 |
/* Represents the reason that generic Continuous Wave (CW) interference |
| 5553 |
* has been found in the current channel. |
| 5554 |
*/ |
| 5555 |
QCA_WLAN_VENDOR_ACS_SELECT_REASON_CW_INTERFERENCE, |
| 5556 |
/* Represents the reason that Microwave Oven (MWO) interference has been |
| 5557 |
* found in the current channel. |
| 5558 |
*/ |
| 5559 |
QCA_WLAN_VENDOR_ACS_SELECT_REASON_MWO_INTERFERENCE, |
| 5560 |
/* Represents the reason that generic Frequency-Hopping Spread Spectrum |
| 5561 |
* (FHSS) interference has been found in the current channel. This may |
| 5562 |
* include 802.11 waveforms. |
| 5563 |
*/ |
| 5564 |
QCA_WLAN_VENDOR_ACS_SELECT_REASON_FHSS_INTERFERENCE, |
| 5565 |
/* Represents the reason that non-802.11 generic Frequency-Hopping |
| 5566 |
* Spread Spectrum (FHSS) interference has been found in the current |
| 5567 |
* channel. |
| 5568 |
*/ |
| 5569 |
QCA_WLAN_VENDOR_ACS_SELECT_REASON_NON_80211_FHSS_INTERFERENCE, |
| 5570 |
/* Represents the reason that generic Wideband (WB) interference has |
| 5571 |
* been found in the current channel. This may include 802.11 waveforms. |
| 5572 |
*/ |
| 5573 |
QCA_WLAN_VENDOR_ACS_SELECT_REASON_WB_INTERFERENCE, |
| 5574 |
/* Represents the reason that non-802.11 generic Wideband (WB) |
| 5575 |
* interference has been found in the current channel. |
| 5576 |
*/ |
| 5577 |
QCA_WLAN_VENDOR_ACS_SELECT_REASON_NON_80211_WB_INTERFERENCE, |
| 5578 |
/* Represents the reason that Jammer interference has been found in the |
| 5579 |
* current channel. |
| 5580 |
*/ |
| 5581 |
QCA_WLAN_VENDOR_ACS_SELECT_REASON_JAMMER_INTERFERENCE, |
| 5582 |
}; |
| 5583 |
|
| 5584 |
/** |
| 5585 |
* qca_wlan_vendor_attr_external_acs_policy: Attribute values for |
| 5586 |
* QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_POLICY to the vendor subcmd |
| 5587 |
* QCA_NL80211_VENDOR_SUBCMD_EXTERNAL_ACS. This represents the |
| 5588 |
* external ACS policies to select the channels w.r.t. the PCL weights. |
| 5589 |
* (QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_PCL represents the channels and |
| 5590 |
* their PCL weights.) |
| 5591 |
* @QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_POLICY_PCL_MANDATORY: Mandatory to |
| 5592 |
* select a channel with non-zero PCL weight. |
| 5593 |
* @QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_POLICY_PCL_PREFERRED: Prefer a |
| 5594 |
* channel with non-zero PCL weight. |
| 5595 |
* |
| 5596 |
*/ |
| 5597 |
enum qca_wlan_vendor_attr_external_acs_policy { |
| 5598 |
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_POLICY_PCL_PREFERRED, |
| 5599 |
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_POLICY_PCL_MANDATORY, |
| 5600 |
}; |
| 5601 |
|
| 5602 |
/** |
| 5603 |
* qca_wlan_vendor_channel_prop_flags: This represent the flags for a channel. |
| 5604 |
* This is used by QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_FLAGS. |
| 5605 |
*/ |
| 5606 |
enum qca_wlan_vendor_channel_prop_flags { |
| 5607 |
/* Bits 0, 1, 2, and 3 are reserved */ |
| 5608 |
|
| 5609 |
/* Turbo channel */ |
| 5610 |
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_TURBO = 1 << 4, |
| 5611 |
/* CCK channel */ |
| 5612 |
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_CCK = 1 << 5, |
| 5613 |
/* OFDM channel */ |
| 5614 |
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_OFDM = 1 << 6, |
| 5615 |
/* 2.4 GHz spectrum channel. */ |
| 5616 |
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_2GHZ = 1 << 7, |
| 5617 |
/* 5 GHz spectrum channel */ |
| 5618 |
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_5GHZ = 1 << 8, |
| 5619 |
/* Only passive scan allowed */ |
| 5620 |
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_PASSIVE = 1 << 9, |
| 5621 |
/* Dynamic CCK-OFDM channel */ |
| 5622 |
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_DYN = 1 << 10, |
| 5623 |
/* GFSK channel (FHSS PHY) */ |
| 5624 |
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_GFSK = 1 << 11, |
| 5625 |
/* Radar found on channel */ |
| 5626 |
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_RADAR = 1 << 12, |
| 5627 |
/* 11a static turbo channel only */ |
| 5628 |
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_STURBO = 1 << 13, |
| 5629 |
/* Half rate channel */ |
| 5630 |
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_HALF = 1 << 14, |
| 5631 |
/* Quarter rate channel */ |
| 5632 |
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_QUARTER = 1 << 15, |
| 5633 |
/* HT 20 channel */ |
| 5634 |
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_HT20 = 1 << 16, |
| 5635 |
/* HT 40 with extension channel above */ |
| 5636 |
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_HT40PLUS = 1 << 17, |
| 5637 |
/* HT 40 with extension channel below */ |
| 5638 |
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_HT40MINUS = 1 << 18, |
| 5639 |
/* HT 40 intolerant */ |
| 5640 |
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_HT40INTOL = 1 << 19, |
| 5641 |
/* VHT 20 channel */ |
| 5642 |
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_VHT20 = 1 << 20, |
| 5643 |
/* VHT 40 with extension channel above */ |
| 5644 |
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_VHT40PLUS = 1 << 21, |
| 5645 |
/* VHT 40 with extension channel below */ |
| 5646 |
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_VHT40MINUS = 1 << 22, |
| 5647 |
/* VHT 80 channel */ |
| 5648 |
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_VHT80 = 1 << 23, |
| 5649 |
/* HT 40 intolerant mark bit for ACS use */ |
| 5650 |
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_HT40INTOLMARK = 1 << 24, |
| 5651 |
/* Channel temporarily blocked due to noise */ |
| 5652 |
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_BLOCKED = 1 << 25, |
| 5653 |
/* VHT 160 channel */ |
| 5654 |
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_VHT160 = 1 << 26, |
| 5655 |
/* VHT 80+80 channel */ |
| 5656 |
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_VHT80_80 = 1 << 27, |
| 5657 |
/* HE 20 channel */ |
| 5658 |
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_HE20 = 1 << 28, |
| 5659 |
/* HE 40 with extension channel above */ |
| 5660 |
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_HE40PLUS = 1 << 29, |
| 5661 |
/* HE 40 with extension channel below */ |
| 5662 |
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_HE40MINUS = 1 << 30, |
| 5663 |
/* HE 40 intolerant */ |
| 5664 |
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_HE40INTOL = 1 << 31, |
| 5665 |
}; |
| 5666 |
|
| 5667 |
/** |
| 5668 |
* qca_wlan_vendor_channel_prop_flags_2: This represents the flags for a |
| 5669 |
* channel, and is a continuation of qca_wlan_vendor_channel_prop_flags. This is |
| 5670 |
* used by QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_FLAGS_2. |
| 5671 |
*/ |
| 5672 |
enum qca_wlan_vendor_channel_prop_flags_2 { |
| 5673 |
/* HE 40 intolerant mark bit for ACS use */ |
| 5674 |
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_HE40INTOLMARK = 1 << 0, |
| 5675 |
/* HE 80 channel */ |
| 5676 |
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_HE80 = 1 << 1, |
| 5677 |
/* HE 160 channel */ |
| 5678 |
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_HE160 = 1 << 2, |
| 5679 |
/* HE 80+80 channel */ |
| 5680 |
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_HE80_80 = 1 << 3, |
| 5681 |
}; |
| 5682 |
|
| 5683 |
/** |
| 5684 |
* qca_wlan_vendor_channel_prop_flags_ext: This represent the extended flags for |
| 5685 |
* each channel. This is used by |
| 5686 |
* QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_FLAG_EXT. |
| 5687 |
*/ |
| 5688 |
enum qca_wlan_vendor_channel_prop_flags_ext { |
| 5689 |
/* Radar found on channel */ |
| 5690 |
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_EXT_RADAR_FOUND = 1 << 0, |
| 5691 |
/* DFS required on channel */ |
| 5692 |
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_EXT_DFS = 1 << 1, |
| 5693 |
/* DFS required on channel for 2nd band of 80+80 */ |
| 5694 |
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_EXT_DFS_CFREQ2 = 1 << 2, |
| 5695 |
/* If channel has been checked for DFS */ |
| 5696 |
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_EXT_DFS_CLEAR = 1 << 3, |
| 5697 |
/* Excluded in 802.11d */ |
| 5698 |
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_EXT_11D_EXCLUDED = 1 << 4, |
| 5699 |
/* Channel Switch Announcement received on this channel */ |
| 5700 |
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_EXT_CSA_RECEIVED = 1 << 5, |
| 5701 |
/* Ad-hoc is not allowed */ |
| 5702 |
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_EXT_DISALLOW_ADHOC = 1 << 6, |
| 5703 |
/* Station only channel */ |
| 5704 |
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_EXT_DISALLOW_HOSTAP = 1 << 7, |
| 5705 |
/* DFS radar history for client device (STA mode) */ |
| 5706 |
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_EXT_HISTORY_RADAR = 1 << 8, |
| 5707 |
/* DFS CAC valid for client device (STA mode) */ |
| 5708 |
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_EXT_CAC_VALID = 1 << 9, |
| 5709 |
}; |
| 5710 |
|
| 5711 |
/** |
| 5712 |
* qca_wlan_vendor_external_acs_event_chan_info_attr: Represents per channel |
| 5713 |
* information. These attributes are sent as part of |
| 5714 |
* QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_CHAN_INFO. Each set of the following |
| 5715 |
* attributes correspond to a single channel. |
| 5716 |
*/ |
| 5717 |
enum qca_wlan_vendor_external_acs_event_chan_info_attr { |
| 5718 |
QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_INVALID = 0, |
| 5719 |
|
| 5720 |
/* A bitmask (u32) with flags specified in |
| 5721 |
* enum qca_wlan_vendor_channel_prop_flags. |
| 5722 |
*/ |
| 5723 |
QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_FLAGS = 1, |
| 5724 |
/* A bitmask (u32) with flags specified in |
| 5725 |
* enum qca_wlan_vendor_channel_prop_flags_ext. |
| 5726 |
*/ |
| 5727 |
QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_FLAG_EXT = 2, |
| 5728 |
/* frequency in MHz (u32) */ |
| 5729 |
QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_FREQ = 3, |
| 5730 |
/* maximum regulatory transmission power (u32) */ |
| 5731 |
QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_MAX_REG_POWER = 4, |
| 5732 |
/* maximum transmission power (u32) */ |
| 5733 |
QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_MAX_POWER = 5, |
| 5734 |
/* minimum transmission power (u32) */ |
| 5735 |
QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_MIN_POWER = 6, |
| 5736 |
/* regulatory class id (u8) */ |
| 5737 |
QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_REG_CLASS_ID = 7, |
| 5738 |
/* maximum antenna gain in (u8) */ |
| 5739 |
QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_ANTENNA_GAIN = 8, |
| 5740 |
/* VHT segment 0 (u8) */ |
| 5741 |
QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_VHT_SEG_0 = 9, |
| 5742 |
/* VHT segment 1 (u8) */ |
| 5743 |
QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_VHT_SEG_1 = 10, |
| 5744 |
/* A bitmask (u32) with flags specified in |
| 5745 |
* enum qca_wlan_vendor_channel_prop_flags_2. |
| 5746 |
*/ |
| 5747 |
QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_FLAGS_2 = 11, |
| 5748 |
|
| 5749 |
/* |
| 5750 |
* VHT segment 0 in MHz (u32) and the attribute is mandatory. |
| 5751 |
* Note: Event QCA_NL80211_VENDOR_SUBCMD_EXTERNAL_ACS includes |
| 5752 |
* QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_FREQ_VHT_SEG_0 |
| 5753 |
* along with |
| 5754 |
* QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_VHT_SEG_0. |
| 5755 |
* |
| 5756 |
* If both the driver and user-space application supports the 6 GHz |
| 5757 |
* band, QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_VHT_SEG_0 |
| 5758 |
* is deprecated and |
| 5759 |
* QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_FREQ_VHT_SEG_0 |
| 5760 |
* should be used. |
| 5761 |
* |
| 5762 |
* To maintain backward compatibility, |
| 5763 |
* QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_FREQ_VHT_SEG_0 |
| 5764 |
* is still used if either of the driver or user space application |
| 5765 |
* doesn't support the 6 GHz band. |
| 5766 |
*/ |
| 5767 |
QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_FREQ_VHT_SEG_0 = 12, |
| 5768 |
|
| 5769 |
/* |
| 5770 |
* VHT segment 1 in MHz (u32) and the attribute is mandatory. |
| 5771 |
* Note: Event QCA_NL80211_VENDOR_SUBCMD_EXTERNAL_ACS includes |
| 5772 |
* QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_FREQ_VHT_SEG_1 |
| 5773 |
* along with |
| 5774 |
* QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_VHT_SEG_1. |
| 5775 |
* |
| 5776 |
* If both the driver and user-space application supports the 6 GHz |
| 5777 |
* band, QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_VHT_SEG_1 |
| 5778 |
* is deprecated and |
| 5779 |
* QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_FREQ_VHT_SEG_1 |
| 5780 |
* should be considered. |
| 5781 |
* |
| 5782 |
* To maintain backward compatibility, |
| 5783 |
* QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_FREQ_VHT_SEG_1 |
| 5784 |
* is still used if either of the driver or user space application |
| 5785 |
* doesn't support the 6 GHz band. |
| 5786 |
*/ |
| 5787 |
QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_FREQ_VHT_SEG_1 = 13, |
| 5788 |
|
| 5789 |
/* keep last */ |
| 5790 |
QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_LAST, |
| 5791 |
QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_MAX = |
| 5792 |
QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_LAST - 1, |
| 5793 |
}; |
| 5794 |
|
| 5795 |
/** |
| 5796 |
* qca_wlan_vendor_attr_pcl: Represents attributes for |
| 5797 |
* preferred channel list (PCL). These attributes are sent as part of |
| 5798 |
* QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_PCL and |
| 5799 |
* QCA_NL80211_VENDOR_SUBCMD_GET_PREFERRED_FREQ_LIST. |
| 5800 |
*/ |
| 5801 |
enum qca_wlan_vendor_attr_pcl { |
| 5802 |
QCA_WLAN_VENDOR_ATTR_PCL_INVALID = 0, |
| 5803 |
|
| 5804 |
/* Channel number (u8) */ |
| 5805 |
QCA_WLAN_VENDOR_ATTR_PCL_CHANNEL = 1, |
| 5806 |
/* Channel weightage (u8) */ |
| 5807 |
QCA_WLAN_VENDOR_ATTR_PCL_WEIGHT = 2, |
| 5808 |
/* Channel frequency (u32) in MHz */ |
| 5809 |
QCA_WLAN_VENDOR_ATTR_PCL_FREQ = 3, |
| 5810 |
/* Channel flags (u32) |
| 5811 |
* bit 0 set: channel to be used for GO role, |
| 5812 |
* bit 1 set: channel to be used on CLI role, |
| 5813 |
* bit 2 set: channel must be considered for operating channel |
| 5814 |
* selection & peer chosen operating channel should be |
| 5815 |
* one of the channels with this flag set, |
| 5816 |
* bit 3 set: channel should be excluded in GO negotiation |
| 5817 |
*/ |
| 5818 |
QCA_WLAN_VENDOR_ATTR_PCL_FLAG = 4, |
| 5819 |
}; |
| 5820 |
|
| 5821 |
/** |
| 5822 |
* qca_wlan_vendor_attr_external_acs_event: Attribute to vendor sub-command |
| 5823 |
* QCA_NL80211_VENDOR_SUBCMD_EXTERNAL_ACS. This attribute will be sent by |
| 5824 |
* host driver. |
| 5825 |
*/ |
| 5826 |
enum qca_wlan_vendor_attr_external_acs_event { |
| 5827 |
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_INVALID = 0, |
| 5828 |
|
| 5829 |
/* This reason (u8) refers to enum qca_wlan_vendor_acs_select_reason. |
| 5830 |
* This helps ACS module to understand why ACS needs to be started. |
| 5831 |
*/ |
| 5832 |
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_REASON = 1, |
| 5833 |
/* Flag attribute to indicate if driver supports spectral scanning */ |
| 5834 |
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_IS_SPECTRAL_SUPPORTED = 2, |
| 5835 |
/* Flag attribute to indicate if 11ac is offloaded to firmware */ |
| 5836 |
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_IS_OFFLOAD_ENABLED = 3, |
| 5837 |
/* Flag attribute to indicate if driver provides additional channel |
| 5838 |
* capability as part of scan operation |
| 5839 |
*/ |
| 5840 |
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_ADD_CHAN_STATS_SUPPORT = 4, |
| 5841 |
/* Flag attribute to indicate interface status is UP */ |
| 5842 |
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_AP_UP = 5, |
| 5843 |
/* Operating mode (u8) of interface. Takes one of enum nl80211_iftype |
| 5844 |
* values. |
| 5845 |
*/ |
| 5846 |
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_SAP_MODE = 6, |
| 5847 |
/* Channel width (u8). It takes one of enum nl80211_chan_width values. |
| 5848 |
* This is the upper bound of channel width. ACS logic should try to get |
| 5849 |
* a channel with the specified width and if not found, look for lower |
| 5850 |
* values. |
| 5851 |
*/ |
| 5852 |
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_CHAN_WIDTH = 7, |
| 5853 |
/* This (u8) will hold values of one of enum nl80211_bands */ |
| 5854 |
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_BAND = 8, |
| 5855 |
/* PHY/HW mode (u8). Takes one of enum qca_wlan_vendor_acs_hw_mode |
| 5856 |
* values |
| 5857 |
*/ |
| 5858 |
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_PHY_MODE = 9, |
| 5859 |
/* Array of (u32) supported frequency list among which ACS should choose |
| 5860 |
* best frequency. |
| 5861 |
*/ |
| 5862 |
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_FREQ_LIST = 10, |
| 5863 |
/* Preferred channel list by the driver which will have array of nested |
| 5864 |
* values as per enum qca_wlan_vendor_attr_pcl attribute. |
| 5865 |
*/ |
| 5866 |
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_PCL = 11, |
| 5867 |
/* Array of nested attribute for each channel. It takes attr as defined |
| 5868 |
* in enum qca_wlan_vendor_external_acs_event_chan_info_attr. |
| 5869 |
*/ |
| 5870 |
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_CHAN_INFO = 12, |
| 5871 |
/* External ACS policy such as PCL mandatory, PCL preferred, etc. |
| 5872 |
* It uses values defined in enum |
| 5873 |
* qca_wlan_vendor_attr_external_acs_policy. |
| 5874 |
*/ |
| 5875 |
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_POLICY = 13, |
| 5876 |
/* Reference RF Operating Parameter (RROP) availability information |
| 5877 |
* (u16). It uses values defined in enum |
| 5878 |
* qca_wlan_vendor_attr_rropavail_info. |
| 5879 |
*/ |
| 5880 |
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_RROPAVAIL_INFO = 14, |
| 5881 |
|
| 5882 |
/* keep last */ |
| 5883 |
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_LAST, |
| 5884 |
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_MAX = |
| 5885 |
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_LAST - 1, |
| 5886 |
}; |
| 5887 |
|
| 5888 |
/** |
| 5889 |
* enum qca_wlan_vendor_attr_external_acs_channels: Attributes to vendor subcmd |
| 5890 |
* QCA_NL80211_VENDOR_SUBCMD_EXTERNAL_ACS. This carries a list of channels |
| 5891 |
* in priority order as decided after ACS operation in userspace. |
| 5892 |
* |
| 5893 |
* @QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_REASON: Required (u8). |
| 5894 |
* One of reason code from enum qca_wlan_vendor_acs_select_reason. |
| 5895 |
* |
| 5896 |
* @QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_LIST: Required |
| 5897 |
* Array of nested values for each channel with following attributes: |
| 5898 |
* QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_PRIMARY, |
| 5899 |
* QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_SECONDARY, |
| 5900 |
* QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_CENTER_SEG0, |
| 5901 |
* QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_CENTER_SEG1, |
| 5902 |
* QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_WIDTH |
| 5903 |
* Note: If both the driver and user-space application supports the 6 GHz band, |
| 5904 |
* QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_LIST is deprecated and use |
| 5905 |
* QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_FREQUENCY_LIST. |
| 5906 |
* To maintain backward compatibility, |
| 5907 |
* QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_LIST |
| 5908 |
* is still used if either of the driver or user space application doesn't |
| 5909 |
* support the 6 GHz band. |
| 5910 |
* |
| 5911 |
* @QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_PRIMARY: Required (u8). |
| 5912 |
* Primary channel number |
| 5913 |
* Note: If both the driver and user-space application supports the 6 GHz band, |
| 5914 |
* QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_PRIMARY is deprecated and use |
| 5915 |
* QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_FREQUENCY_PRIMARY. |
| 5916 |
* To maintain backward compatibility, |
| 5917 |
* QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_PRIMARY |
| 5918 |
* is still used if either of the driver or user space application doesn't |
| 5919 |
* support the 6 GHz band. |
| 5920 |
* |
| 5921 |
* @QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_SECONDARY: Required (u8). |
| 5922 |
* Secondary channel number, required only for 160 and 80+80 MHz bandwidths. |
| 5923 |
* Note: If both the driver and user-space application supports the 6 GHz band, |
| 5924 |
* QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_SECONDARY is deprecated and use |
| 5925 |
* QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_FREQUENCY_SECONDARY. |
| 5926 |
* To maintain backward compatibility, |
| 5927 |
* QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_SECONDARY |
| 5928 |
* is still used if either of the driver or user space application |
| 5929 |
* doesn't support the 6 GHz band. |
| 5930 |
* |
| 5931 |
* @QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_CENTER_SEG0: Required (u8). |
| 5932 |
* VHT seg0 channel number |
| 5933 |
* Note: If both the driver and user-space application supports the 6 GHz band, |
| 5934 |
* QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_CENTER_SEG0 is deprecated and use |
| 5935 |
* QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_FREQUENCY_CENTER_SEG0. |
| 5936 |
* To maintain backward compatibility, |
| 5937 |
* QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_CENTER_SEG0 |
| 5938 |
* is still used if either of the driver or user space application |
| 5939 |
* doesn't support the 6 GHz band. |
| 5940 |
* |
| 5941 |
* @QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_CENTER_SEG1: Required (u8). |
| 5942 |
* VHT seg1 channel number |
| 5943 |
* Note: If both the driver and user-space application supports the 6 GHz band, |
| 5944 |
* QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_CENTER_SEG1 is deprecated and use |
| 5945 |
* QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_FREQUENCY_CENTER_SEG1. |
| 5946 |
* To maintain backward compatibility, |
| 5947 |
* QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_CENTER_SEG1 |
| 5948 |
* is still used if either of the driver or user space application |
| 5949 |
* doesn't support the 6 GHz band. |
| 5950 |
* |
| 5951 |
* @QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_WIDTH: Required (u8). |
| 5952 |
* Takes one of enum nl80211_chan_width values. |
| 5953 |
* |
| 5954 |
* @QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_FREQUENCY_LIST: Required |
| 5955 |
* Array of nested values for each channel with following attributes: |
| 5956 |
* QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_FREQUENCY_PRIMARY in MHz (u32), |
| 5957 |
* QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_FREQUENCY_SECONDARY in MHz (u32), |
| 5958 |
* QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_FREQUENCY_CENTER_SEG0 in MHz (u32), |
| 5959 |
* QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_FREQUENCY_CENTER_SEG1 in MHz (u32), |
| 5960 |
* QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_WIDTH |
| 5961 |
* Note: If user-space application has no support of the 6 GHz band, this |
| 5962 |
* attribute is optional. |
| 5963 |
* |
| 5964 |
* @QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_FREQUENCY_PRIMARY: Required (u32) |
| 5965 |
* Primary channel frequency in MHz |
| 5966 |
* Note: If user-space application has no support of the 6 GHz band, this |
| 5967 |
* attribute is optional. |
| 5968 |
* |
| 5969 |
* @QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_FREQUENCY_SECONDARY: Required (u32) |
| 5970 |
* Secondary channel frequency in MHz used for HT 40 MHz channels. |
| 5971 |
* Note: If user-space application has no support of the 6 GHz band, this |
| 5972 |
* attribute is optional. |
| 5973 |
* |
| 5974 |
* @QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_FREQUENCY_CENTER_SEG0: Required (u32) |
| 5975 |
* VHT seg0 channel frequency in MHz |
| 5976 |
* Note: If user-space application has no support of the 6GHz band, this |
| 5977 |
* attribute is optional. |
| 5978 |
* |
| 5979 |
* @QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_FREQUENCY_CENTER_SEG1: Required (u32) |
| 5980 |
* VHT seg1 channel frequency in MHz |
| 5981 |
* Note: If user-space application has no support of the 6 GHz band, this |
| 5982 |
* attribute is optional. |
| 5983 |
*/ |
| 5984 |
enum qca_wlan_vendor_attr_external_acs_channels { |
| 5985 |
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_INVALID = 0, |
| 5986 |
|
| 5987 |
/* One of reason code (u8) from enum qca_wlan_vendor_acs_select_reason |
| 5988 |
*/ |
| 5989 |
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_REASON = 1, |
| 5990 |
|
| 5991 |
/* Array of nested values for each channel with following attributes: |
| 5992 |
* QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_BAND, |
| 5993 |
* QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_PRIMARY, |
| 5994 |
* QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_SECONDARY, |
| 5995 |
* QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_CENTER_SEG0, |
| 5996 |
* QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_CENTER_SEG1, |
| 5997 |
* QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_WIDTH |
| 5998 |
*/ |
| 5999 |
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_LIST = 2, |
| 6000 |
/* This (u8) will hold values of one of enum nl80211_bands */ |
| 6001 |
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_BAND = 3, |
| 6002 |
/* Primary channel (u8) */ |
| 6003 |
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_PRIMARY = 4, |
| 6004 |
/* Secondary channel (u8) used for HT 40 MHz channels */ |
| 6005 |
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_SECONDARY = 5, |
| 6006 |
/* VHT seg0 channel (u8) */ |
| 6007 |
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_CENTER_SEG0 = 6, |
| 6008 |
/* VHT seg1 channel (u8) */ |
| 6009 |
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_CENTER_SEG1 = 7, |
| 6010 |
/* Channel width (u8). Takes one of enum nl80211_chan_width values. */ |
| 6011 |
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_WIDTH = 8, |
| 6012 |
|
| 6013 |
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_FREQUENCY_LIST = 9, |
| 6014 |
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_FREQUENCY_PRIMARY = 10, |
| 6015 |
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_FREQUENCY_SECONDARY = 11, |
| 6016 |
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_FREQUENCY_CENTER_SEG0 = 12, |
| 6017 |
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_FREQUENCY_CENTER_SEG1 = 13, |
| 6018 |
|
| 6019 |
/* keep last */ |
| 6020 |
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_LAST, |
| 6021 |
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_MAX = |
| 6022 |
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_LAST - 1 |
| 6023 |
}; |
| 6024 |
|
| 6025 |
enum qca_chip_power_save_failure_reason { |
| 6026 |
/* Indicates if the reason for the failure is due to a protocol |
| 6027 |
* layer/module. |
| 6028 |
*/ |
| 6029 |
QCA_CHIP_POWER_SAVE_FAILURE_REASON_PROTOCOL = 0, |
| 6030 |
/* Indicates if the reason for the failure is due to a hardware issue. |
| 6031 |
*/ |
| 6032 |
QCA_CHIP_POWER_SAVE_FAILURE_REASON_HARDWARE = 1, |
| 6033 |
}; |
| 6034 |
|
| 6035 |
/** |
| 6036 |
* qca_attr_chip_power_save_failure: Attributes to vendor subcmd |
| 6037 |
* QCA_NL80211_VENDOR_SUBCMD_CHIP_PWRSAVE_FAILURE. This carries the requisite |
| 6038 |
* information leading to the power save failure. |
| 6039 |
*/ |
| 6040 |
enum qca_attr_chip_power_save_failure { |
| 6041 |
QCA_ATTR_CHIP_POWER_SAVE_FAILURE_INVALID = 0, |
| 6042 |
/* Reason to cause the power save failure. |
| 6043 |
* These reasons are represented by |
| 6044 |
* enum qca_chip_power_save_failure_reason. |
| 6045 |
*/ |
| 6046 |
QCA_ATTR_CHIP_POWER_SAVE_FAILURE_REASON = 1, |
| 6047 |
|
| 6048 |
/* keep last */ |
| 6049 |
QCA_ATTR_CHIP_POWER_SAVE_FAILURE_LAST, |
| 6050 |
QCA_ATTR_CHIP_POWER_SAVE_FAILURE_MAX = |
| 6051 |
QCA_ATTR_CHIP_POWER_SAVE_FAILURE_LAST - 1, |
| 6052 |
}; |
| 6053 |
|
| 6054 |
/** |
| 6055 |
* qca_wlan_vendor_nud_stats_data_pkt_flags: Flag representing the various |
| 6056 |
* data types for which the stats have to get collected. |
| 6057 |
*/ |
| 6058 |
enum qca_wlan_vendor_nud_stats_data_pkt_flags { |
| 6059 |
QCA_WLAN_VENDOR_NUD_STATS_DATA_ARP = 1 << 0, |
| 6060 |
QCA_WLAN_VENDOR_NUD_STATS_DATA_DNS = 1 << 1, |
| 6061 |
QCA_WLAN_VENDOR_NUD_STATS_DATA_TCP_HANDSHAKE = 1 << 2, |
| 6062 |
QCA_WLAN_VENDOR_NUD_STATS_DATA_ICMPV4 = 1 << 3, |
| 6063 |
QCA_WLAN_VENDOR_NUD_STATS_DATA_ICMPV6 = 1 << 4, |
| 6064 |
/* Used by QCA_ATTR_NUD_STATS_PKT_TYPE only in nud stats get |
| 6065 |
* to represent the stats of respective data type. |
| 6066 |
*/ |
| 6067 |
QCA_WLAN_VENDOR_NUD_STATS_DATA_TCP_SYN = 1 << 5, |
| 6068 |
QCA_WLAN_VENDOR_NUD_STATS_DATA_TCP_SYN_ACK = 1 << 6, |
| 6069 |
QCA_WLAN_VENDOR_NUD_STATS_DATA_TCP_ACK = 1 << 7, |
| 6070 |
}; |
| 6071 |
|
| 6072 |
enum qca_wlan_vendor_nud_stats_set_data_pkt_info { |
| 6073 |
QCA_ATTR_NUD_STATS_DATA_PKT_INFO_INVALID = 0, |
| 6074 |
/* Represents the data packet type to be monitored (u32). |
| 6075 |
* Host driver tracks the stats corresponding to each data frame |
| 6076 |
* represented by these flags. |
| 6077 |
* These data packets are represented by |
| 6078 |
* enum qca_wlan_vendor_nud_stats_data_pkt_flags |
| 6079 |
*/ |
| 6080 |
QCA_ATTR_NUD_STATS_DATA_PKT_INFO_TYPE = 1, |
| 6081 |
/* Name corresponding to the DNS frame for which the respective DNS |
| 6082 |
* stats have to get monitored (string). Max string length 255. |
| 6083 |
*/ |
| 6084 |
QCA_ATTR_NUD_STATS_DATA_PKT_INFO_DNS_DOMAIN_NAME = 2, |
| 6085 |
/* source port on which the respective proto stats have to get |
| 6086 |
* collected (u32). |
| 6087 |
*/ |
| 6088 |
QCA_ATTR_NUD_STATS_DATA_PKT_INFO_SRC_PORT = 3, |
| 6089 |
/* destination port on which the respective proto stats have to get |
| 6090 |
* collected (u32). |
| 6091 |
*/ |
| 6092 |
QCA_ATTR_NUD_STATS_DATA_PKT_INFO_DEST_PORT = 4, |
| 6093 |
/* IPv4 address for which the destined data packets have to be |
| 6094 |
* monitored. (in network byte order), u32. |
| 6095 |
*/ |
| 6096 |
QCA_ATTR_NUD_STATS_DATA_PKT_INFO_DEST_IPV4 = 5, |
| 6097 |
/* IPv6 address for which the destined data packets have to be |
| 6098 |
* monitored. (in network byte order), 16 bytes array. |
| 6099 |
*/ |
| 6100 |
QCA_ATTR_NUD_STATS_DATA_PKT_INFO_DEST_IPV6 = 6, |
| 6101 |
|
| 6102 |
QCA_ATTR_NUD_STATS_DATA_PKT_INFO_LAST, |
| 6103 |
QCA_ATTR_NUD_STATS_DATA_PKT_INFO_MAX = |
| 6104 |
QCA_ATTR_NUD_STATS_DATA_PKT_INFO_LAST - 1, |
| 6105 |
}; |
| 6106 |
|
| 6107 |
/** |
| 6108 |
* qca_wlan_vendor_attr_nud_stats_set: Attributes to vendor subcmd |
| 6109 |
* QCA_NL80211_VENDOR_SUBCMD_NUD_STATS_SET. This carries the requisite |
| 6110 |
* information to start/stop the NUD statistics collection. |
| 6111 |
*/ |
| 6112 |
enum qca_attr_nud_stats_set { |
| 6113 |
QCA_ATTR_NUD_STATS_SET_INVALID = 0, |
| 6114 |
|
| 6115 |
/* Flag to start/stop the NUD statistics collection. |
| 6116 |
* Start - If included, Stop - If not included |
| 6117 |
*/ |
| 6118 |
QCA_ATTR_NUD_STATS_SET_START = 1, |
| 6119 |
/* IPv4 address of the default gateway (in network byte order), u32 */ |
| 6120 |
QCA_ATTR_NUD_STATS_GW_IPV4 = 2, |
| 6121 |
/* Represents the list of data packet types to be monitored. |
| 6122 |
* Host driver tracks the stats corresponding to each data frame |
| 6123 |
* represented by these flags. |
| 6124 |
* These data packets are represented by |
| 6125 |
* enum qca_wlan_vendor_nud_stats_set_data_pkt_info |
| 6126 |
*/ |
| 6127 |
QCA_ATTR_NUD_STATS_SET_DATA_PKT_INFO = 3, |
| 6128 |
|
| 6129 |
/* keep last */ |
| 6130 |
QCA_ATTR_NUD_STATS_SET_LAST, |
| 6131 |
QCA_ATTR_NUD_STATS_SET_MAX = |
| 6132 |
QCA_ATTR_NUD_STATS_SET_LAST - 1, |
| 6133 |
}; |
| 6134 |
|
| 6135 |
enum qca_attr_nud_data_stats { |
| 6136 |
QCA_ATTR_NUD_DATA_STATS_INVALID = 0, |
| 6137 |
/* Data packet type for which the stats are collected (u32). |
| 6138 |
* Represented by enum qca_wlan_vendor_nud_stats_data_pkt_flags |
| 6139 |
*/ |
| 6140 |
QCA_ATTR_NUD_STATS_PKT_TYPE = 1, |
| 6141 |
/* Name corresponding to the DNS frame for which the respective DNS |
| 6142 |
* stats are monitored (string). Max string length 255. |
| 6143 |
*/ |
| 6144 |
QCA_ATTR_NUD_STATS_PKT_DNS_DOMAIN_NAME = 2, |
| 6145 |
/* source port on which the respective proto stats are collected (u32). |
| 6146 |
*/ |
| 6147 |
QCA_ATTR_NUD_STATS_PKT_SRC_PORT = 3, |
| 6148 |
/* destination port on which the respective proto stats are collected |
| 6149 |
* (u32). |
| 6150 |
*/ |
| 6151 |
QCA_ATTR_NUD_STATS_PKT_DEST_PORT = 4, |
| 6152 |
/* IPv4 address for which the destined data packets have to be |
| 6153 |
* monitored. (in network byte order), u32. |
| 6154 |
*/ |
| 6155 |
QCA_ATTR_NUD_STATS_PKT_DEST_IPV4 = 5, |
| 6156 |
/* IPv6 address for which the destined data packets have to be |
| 6157 |
* monitored. (in network byte order), 16 bytes array. |
| 6158 |
*/ |
| 6159 |
QCA_ATTR_NUD_STATS_PKT_DEST_IPV6 = 6, |
| 6160 |
/* Data packet Request count received from netdev (u32). */ |
| 6161 |
QCA_ATTR_NUD_STATS_PKT_REQ_COUNT_FROM_NETDEV = 7, |
| 6162 |
/* Data packet Request count sent to lower MAC from upper MAC (u32). */ |
| 6163 |
QCA_ATTR_NUD_STATS_PKT_REQ_COUNT_TO_LOWER_MAC = 8, |
| 6164 |
/* Data packet Request count received by lower MAC from upper MAC |
| 6165 |
* (u32) |
| 6166 |
*/ |
| 6167 |
QCA_ATTR_NUD_STATS_PKT_REQ_RX_COUNT_BY_LOWER_MAC = 9, |
| 6168 |
/* Data packet Request count successfully transmitted by the device |
| 6169 |
* (u32) |
| 6170 |
*/ |
| 6171 |
QCA_ATTR_NUD_STATS_PKT_REQ_COUNT_TX_SUCCESS = 10, |
| 6172 |
/* Data packet Response count received by lower MAC (u32) */ |
| 6173 |
QCA_ATTR_NUD_STATS_PKT_RSP_RX_COUNT_BY_LOWER_MAC = 11, |
| 6174 |
/* Data packet Response count received by upper MAC (u32) */ |
| 6175 |
QCA_ATTR_NUD_STATS_PKT_RSP_RX_COUNT_BY_UPPER_MAC = 12, |
| 6176 |
/* Data packet Response count delivered to netdev (u32) */ |
| 6177 |
QCA_ATTR_NUD_STATS_PKT_RSP_COUNT_TO_NETDEV = 13, |
| 6178 |
/* Data Packet Response count that are dropped out of order (u32) */ |
| 6179 |
QCA_ATTR_NUD_STATS_PKT_RSP_COUNT_OUT_OF_ORDER_DROP = 14, |
| 6180 |
|
| 6181 |
/* keep last */ |
| 6182 |
QCA_ATTR_NUD_DATA_STATS_LAST, |
| 6183 |
QCA_ATTR_NUD_DATA_STATS_MAX = |
| 6184 |
QCA_ATTR_NUD_DATA_STATS_LAST - 1, |
| 6185 |
}; |
| 6186 |
|
| 6187 |
/** |
| 6188 |
* qca_attr_nud_stats_get: Attributes to vendor subcmd |
| 6189 |
* QCA_NL80211_VENDOR_SUBCMD_NUD_STATS_GET. This carries the requisite |
| 6190 |
* NUD statistics collected when queried. |
| 6191 |
*/ |
| 6192 |
enum qca_attr_nud_stats_get { |
| 6193 |
QCA_ATTR_NUD_STATS_GET_INVALID = 0, |
| 6194 |
/* ARP Request count from netdev (u32) */ |
| 6195 |
QCA_ATTR_NUD_STATS_ARP_REQ_COUNT_FROM_NETDEV = 1, |
| 6196 |
/* ARP Request count sent to lower MAC from upper MAC (u32) */ |
| 6197 |
QCA_ATTR_NUD_STATS_ARP_REQ_COUNT_TO_LOWER_MAC = 2, |
| 6198 |
/* ARP Request count received by lower MAC from upper MAC (u32) */ |
| 6199 |
QCA_ATTR_NUD_STATS_ARP_REQ_RX_COUNT_BY_LOWER_MAC = 3, |
| 6200 |
/* ARP Request count successfully transmitted by the device (u32) */ |
| 6201 |
QCA_ATTR_NUD_STATS_ARP_REQ_COUNT_TX_SUCCESS = 4, |
| 6202 |
/* ARP Response count received by lower MAC (u32) */ |
| 6203 |
QCA_ATTR_NUD_STATS_ARP_RSP_RX_COUNT_BY_LOWER_MAC = 5, |
| 6204 |
/* ARP Response count received by upper MAC (u32) */ |
| 6205 |
QCA_ATTR_NUD_STATS_ARP_RSP_RX_COUNT_BY_UPPER_MAC = 6, |
| 6206 |
/* ARP Response count delivered to netdev (u32) */ |
| 6207 |
QCA_ATTR_NUD_STATS_ARP_RSP_COUNT_TO_NETDEV = 7, |
| 6208 |
/* ARP Response count dropped due to out of order reception (u32) */ |
| 6209 |
QCA_ATTR_NUD_STATS_ARP_RSP_COUNT_OUT_OF_ORDER_DROP = 8, |
| 6210 |
/* Flag indicating if the station's link to the AP is active. |
| 6211 |
* Active Link - If included, Inactive link - If not included |
| 6212 |
*/ |
| 6213 |
QCA_ATTR_NUD_STATS_AP_LINK_ACTIVE = 9, |
| 6214 |
/* Flag indicating if there is any duplicate address detected (DAD). |
| 6215 |
* Yes - If detected, No - If not detected. |
| 6216 |
*/ |
| 6217 |
QCA_ATTR_NUD_STATS_IS_DAD = 10, |
| 6218 |
/* List of Data packet types for which the stats are requested. |
| 6219 |
* This list does not carry ARP stats as they are done by the |
| 6220 |
* above attributes. Represented by enum qca_attr_nud_data_stats. |
| 6221 |
*/ |
| 6222 |
QCA_ATTR_NUD_STATS_DATA_PKT_STATS = 11, |
| 6223 |
|
| 6224 |
/* keep last */ |
| 6225 |
QCA_ATTR_NUD_STATS_GET_LAST, |
| 6226 |
QCA_ATTR_NUD_STATS_GET_MAX = |
| 6227 |
QCA_ATTR_NUD_STATS_GET_LAST - 1, |
| 6228 |
}; |
| 6229 |
|
| 6230 |
enum qca_wlan_btm_candidate_status { |
| 6231 |
QCA_STATUS_ACCEPT = 0, |
| 6232 |
QCA_STATUS_REJECT_EXCESSIVE_FRAME_LOSS_EXPECTED = 1, |
| 6233 |
QCA_STATUS_REJECT_EXCESSIVE_DELAY_EXPECTED = 2, |
| 6234 |
QCA_STATUS_REJECT_INSUFFICIENT_QOS_CAPACITY = 3, |
| 6235 |
QCA_STATUS_REJECT_LOW_RSSI = 4, |
| 6236 |
QCA_STATUS_REJECT_HIGH_INTERFERENCE = 5, |
| 6237 |
QCA_STATUS_REJECT_UNKNOWN = 6, |
| 6238 |
}; |
| 6239 |
|
| 6240 |
enum qca_wlan_vendor_attr_btm_candidate_info { |
| 6241 |
QCA_WLAN_VENDOR_ATTR_BTM_CANDIDATE_INFO_INVALID = 0, |
| 6242 |
|
| 6243 |
/* 6-byte MAC address representing the BSSID of transition candidate */ |
| 6244 |
QCA_WLAN_VENDOR_ATTR_BTM_CANDIDATE_INFO_BSSID = 1, |
| 6245 |
/* Unsigned 32-bit value from enum qca_wlan_btm_candidate_status |
| 6246 |
* returned by the driver. It says whether the BSSID provided in |
| 6247 |
* QCA_WLAN_VENDOR_ATTR_BTM_CANDIDATE_INFO_BSSID is acceptable by |
| 6248 |
* the driver, if not it specifies the reason for rejection. |
| 6249 |
* Note that the user-space can overwrite the transition reject reason |
| 6250 |
* codes provided by driver based on more information. |
| 6251 |
*/ |
| 6252 |
QCA_WLAN_VENDOR_ATTR_BTM_CANDIDATE_INFO_STATUS = 2, |
| 6253 |
|
| 6254 |
/* keep last */ |
| 6255 |
QCA_WLAN_VENDOR_ATTR_BTM_CANDIDATE_INFO_AFTER_LAST, |
| 6256 |
QCA_WLAN_VENDOR_ATTR_BTM_CANDIDATE_INFO_MAX = |
| 6257 |
QCA_WLAN_VENDOR_ATTR_BTM_CANDIDATE_INFO_AFTER_LAST - 1, |
| 6258 |
}; |
| 6259 |
|
| 6260 |
enum qca_attr_trace_level { |
| 6261 |
QCA_ATTR_TRACE_LEVEL_INVALID = 0, |
| 6262 |
/* |
| 6263 |
* Nested array of the following attributes: |
| 6264 |
* QCA_ATTR_TRACE_LEVEL_MODULE, |
| 6265 |
* QCA_ATTR_TRACE_LEVEL_MASK. |
| 6266 |
*/ |
| 6267 |
QCA_ATTR_TRACE_LEVEL_PARAM = 1, |
| 6268 |
/* |
| 6269 |
* Specific QCA host driver module. Please refer to the QCA host |
| 6270 |
* driver implementation to get the specific module ID. |
| 6271 |
*/ |
| 6272 |
QCA_ATTR_TRACE_LEVEL_MODULE = 2, |
| 6273 |
/* Different trace level masks represented in the QCA host driver. */ |
| 6274 |
QCA_ATTR_TRACE_LEVEL_MASK = 3, |
| 6275 |
|
| 6276 |
/* keep last */ |
| 6277 |
QCA_ATTR_TRACE_LEVEL_AFTER_LAST, |
| 6278 |
QCA_ATTR_TRACE_LEVEL_MAX = |
| 6279 |
QCA_ATTR_TRACE_LEVEL_AFTER_LAST - 1, |
| 6280 |
}; |
| 6281 |
|
| 6282 |
/** |
| 6283 |
* enum qca_wlan_vendor_attr_get_he_capabilities - IEEE 802.11ax HE capabilities |
| 6284 |
*/ |
| 6285 |
enum qca_wlan_vendor_attr_get_he_capabilities { |
| 6286 |
QCA_WLAN_VENDOR_ATTR_HE_CAPABILITIES_INVALID = 0, |
| 6287 |
/* Whether HE capabilities is supported |
| 6288 |
* (u8 attribute: 0 = not supported, 1 = supported) |
| 6289 |
*/ |
| 6290 |
QCA_WLAN_VENDOR_ATTR_HE_SUPPORTED = 1, |
| 6291 |
/* HE PHY capabilities, array of 3 u32 values */ |
| 6292 |
QCA_WLAN_VENDOR_ATTR_PHY_CAPAB = 2, |
| 6293 |
/* HE MAC capabilities (u32 attribute) */ |
| 6294 |
QCA_WLAN_VENDOR_ATTR_MAC_CAPAB = 3, |
| 6295 |
/* HE MCS map (u32 attribute) */ |
| 6296 |
QCA_WLAN_VENDOR_ATTR_HE_MCS = 4, |
| 6297 |
/* Number of SS (u32 attribute) */ |
| 6298 |
QCA_WLAN_VENDOR_ATTR_NUM_SS = 5, |
| 6299 |
/* RU count (u32 attribute) */ |
| 6300 |
QCA_WLAN_VENDOR_ATTR_RU_IDX_MASK = 6, |
| 6301 |
/* PPE threshold data, array of 8 u32 values */ |
| 6302 |
QCA_WLAN_VENDOR_ATTR_PPE_THRESHOLD = 7, |
| 6303 |
|
| 6304 |
/* keep last */ |
| 6305 |
QCA_WLAN_VENDOR_ATTR_HE_CAPABILITIES_AFTER_LAST, |
| 6306 |
QCA_WLAN_VENDOR_ATTR_HE_CAPABILITIES_MAX = |
| 6307 |
QCA_WLAN_VENDOR_ATTR_HE_CAPABILITIES_AFTER_LAST - 1, |
| 6308 |
}; |
| 6309 |
|
| 6310 |
/** |
| 6311 |
* enum qca_wlan_vendor_attr_spectral_scan - Spectral scan config parameters |
| 6312 |
*/ |
| 6313 |
enum qca_wlan_vendor_attr_spectral_scan { |
| 6314 |
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_INVALID = 0, |
| 6315 |
/* Number of times the chip enters spectral scan mode before |
| 6316 |
* deactivating spectral scans. When set to 0, chip will enter spectral |
| 6317 |
* scan mode continuously. u32 attribute. |
| 6318 |
*/ |
| 6319 |
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_SCAN_COUNT = 1, |
| 6320 |
/* Spectral scan period. Period increment resolution is 256*Tclk, |
| 6321 |
* where Tclk = 1/44 MHz (Gmode), 1/40 MHz (Amode). u32 attribute. |
| 6322 |
*/ |
| 6323 |
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_SCAN_PERIOD = 2, |
| 6324 |
/* Spectral scan priority. u32 attribute. */ |
| 6325 |
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_PRIORITY = 3, |
| 6326 |
/* Number of FFT data points to compute. u32 attribute. */ |
| 6327 |
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_FFT_SIZE = 4, |
| 6328 |
/* Enable targeted gain change before starting the spectral scan FFT. |
| 6329 |
* u32 attribute. |
| 6330 |
*/ |
| 6331 |
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_GC_ENA = 5, |
| 6332 |
/* Restart a queued spectral scan. u32 attribute. */ |
| 6333 |
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_RESTART_ENA = 6, |
| 6334 |
/* Noise floor reference number for the calculation of bin power. |
| 6335 |
* u32 attribute. |
| 6336 |
*/ |
| 6337 |
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_NOISE_FLOOR_REF = 7, |
| 6338 |
/* Disallow spectral scan triggers after TX/RX packets by setting |
| 6339 |
* this delay value to roughly SIFS time period or greater. |
| 6340 |
* u32 attribute. |
| 6341 |
*/ |
| 6342 |
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_INIT_DELAY = 8, |
| 6343 |
/* Number of strong bins (inclusive) per sub-channel, below |
| 6344 |
* which a signal is declared a narrow band tone. u32 attribute. |
| 6345 |
*/ |
| 6346 |
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_NB_TONE_THR = 9, |
| 6347 |
/* Specify the threshold over which a bin is declared strong (for |
| 6348 |
* scan bandwidth analysis). u32 attribute. |
| 6349 |
*/ |
| 6350 |
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_STR_BIN_THR = 10, |
| 6351 |
/* Spectral scan report mode. u32 attribute. */ |
| 6352 |
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_WB_RPT_MODE = 11, |
| 6353 |
/* RSSI report mode, if the ADC RSSI is below |
| 6354 |
* QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_RSSI_THR, |
| 6355 |
* then FFTs will not trigger, but timestamps and summaries get |
| 6356 |
* reported. u32 attribute. |
| 6357 |
*/ |
| 6358 |
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_RSSI_RPT_MODE = 12, |
| 6359 |
/* ADC RSSI must be greater than or equal to this threshold (signed dB) |
| 6360 |
* to ensure spectral scan reporting with normal error code. |
| 6361 |
* u32 attribute. |
| 6362 |
*/ |
| 6363 |
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_RSSI_THR = 13, |
| 6364 |
/* Format of frequency bin magnitude for spectral scan triggered FFTs: |
| 6365 |
* 0: linear magnitude, 1: log magnitude (20*log10(lin_mag)). |
| 6366 |
* u32 attribute. |
| 6367 |
*/ |
| 6368 |
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_PWR_FORMAT = 14, |
| 6369 |
/* Format of FFT report to software for spectral scan triggered FFTs. |
| 6370 |
* 0: No FFT report (only spectral scan summary report) |
| 6371 |
* 1: 2-dword summary of metrics for each completed FFT + spectral scan |
| 6372 |
* report |
| 6373 |
* 2: 2-dword summary of metrics for each completed FFT + 1x-oversampled |
| 6374 |
* bins (in-band) per FFT + spectral scan summary report |
| 6375 |
* 3: 2-dword summary of metrics for each completed FFT + 2x-oversampled |
| 6376 |
* bins (all) per FFT + spectral scan summary report |
| 6377 |
* u32 attribute. |
| 6378 |
*/ |
| 6379 |
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_RPT_MODE = 15, |
| 6380 |
/* Number of LSBs to shift out in order to scale the FFT bins. |
| 6381 |
* u32 attribute. |
| 6382 |
*/ |
| 6383 |
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_BIN_SCALE = 16, |
| 6384 |
/* Set to 1 (with spectral_scan_pwr_format=1), to report bin magnitudes |
| 6385 |
* in dBm power. u32 attribute. |
| 6386 |
*/ |
| 6387 |
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_DBM_ADJ = 17, |
| 6388 |
/* Per chain enable mask to select input ADC for search FFT. |
| 6389 |
* u32 attribute. |
| 6390 |
*/ |
| 6391 |
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_CHN_MASK = 18, |
| 6392 |
/* An unsigned 64-bit integer provided by host driver to identify the |
| 6393 |
* spectral scan request. This attribute is included in the scan |
| 6394 |
* response message for @QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_START |
| 6395 |
* and used as an attribute in |
| 6396 |
* @QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_STOP to identify the |
| 6397 |
* specific scan to be stopped. |
| 6398 |
*/ |
| 6399 |
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_COOKIE = 19, |
| 6400 |
/* Skip interval for FFT reports. u32 attribute */ |
| 6401 |
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_FFT_PERIOD = 20, |
| 6402 |
/* Set to report only one set of FFT results. |
| 6403 |
* u32 attribute. |
| 6404 |
*/ |
| 6405 |
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_SHORT_REPORT = 21, |
| 6406 |
/* Debug level for spectral module in driver. |
| 6407 |
* 0 : Verbosity level 0 |
| 6408 |
* 1 : Verbosity level 1 |
| 6409 |
* 2 : Verbosity level 2 |
| 6410 |
* 3 : Matched filterID display |
| 6411 |
* 4 : One time dump of FFT report |
| 6412 |
* u32 attribute. |
| 6413 |
*/ |
| 6414 |
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_DEBUG_LEVEL = 22, |
| 6415 |
/* Type of spectral scan request. u32 attribute. |
| 6416 |
* It uses values defined in enum |
| 6417 |
* qca_wlan_vendor_attr_spectral_scan_request_type. |
| 6418 |
*/ |
| 6419 |
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_REQUEST_TYPE = 23, |
| 6420 |
/* This specifies the frequency span over which spectral |
| 6421 |
* scan would be carried out. Its value depends on the |
| 6422 |
* value of QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_MODE and |
| 6423 |
* the relation is as follows. |
| 6424 |
* QCA_WLAN_VENDOR_SPECTRAL_SCAN_MODE_NORMAL |
| 6425 |
* Not applicable. Spectral scan would happen in the |
| 6426 |
* operating span. |
| 6427 |
* QCA_WLAN_VENDOR_SPECTRAL_SCAN_MODE_AGILE |
| 6428 |
* Center frequency (in MHz) of the span of interest or |
| 6429 |
* for convenience, center frequency (in MHz) of any channel |
| 6430 |
* in the span of interest. For 80+80 MHz agile spectral scan |
| 6431 |
* request it represents center frequency (in MHz) of the primary |
| 6432 |
* 80 MHz span or for convenience, center frequency (in MHz) of any |
| 6433 |
* channel in the primary 80 MHz span. If agile spectral scan is |
| 6434 |
* initiated without setting a valid frequency it returns the |
| 6435 |
* error code |
| 6436 |
* (QCA_WLAN_VENDOR_SPECTRAL_SCAN_ERR_PARAM_NOT_INITIALIZED). |
| 6437 |
* u32 attribute. |
| 6438 |
*/ |
| 6439 |
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_FREQUENCY = 24, |
| 6440 |
/* Spectral scan mode. u32 attribute. |
| 6441 |
* It uses values defined in enum qca_wlan_vendor_spectral_scan_mode. |
| 6442 |
* If this attribute is not present, it is assumed to be |
| 6443 |
* normal mode (QCA_WLAN_VENDOR_SPECTRAL_SCAN_MODE_NORMAL). |
| 6444 |
*/ |
| 6445 |
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_MODE = 25, |
| 6446 |
/* Spectral scan error code. u32 attribute. |
| 6447 |
* It uses values defined in enum |
| 6448 |
* qca_wlan_vendor_spectral_scan_error_code. |
| 6449 |
* This attribute is included only in failure scenarios. |
| 6450 |
*/ |
| 6451 |
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_ERROR_CODE = 26, |
| 6452 |
/* 8-bit unsigned value to enable/disable debug of the |
| 6453 |
* Spectral DMA ring. |
| 6454 |
* 1-enable, 0-disable |
| 6455 |
*/ |
| 6456 |
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_DMA_RING_DEBUG = 27, |
| 6457 |
/* 8-bit unsigned value to enable/disable debug of the |
| 6458 |
* Spectral DMA buffers. |
| 6459 |
* 1-enable, 0-disable |
| 6460 |
*/ |
| 6461 |
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_DMA_BUFFER_DEBUG = 28, |
| 6462 |
/* This specifies the frequency span over which spectral scan would be |
| 6463 |
* carried out. Its value depends on the value of |
| 6464 |
* QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_MODE and the relation is as |
| 6465 |
* follows. |
| 6466 |
* QCA_WLAN_VENDOR_SPECTRAL_SCAN_MODE_NORMAL |
| 6467 |
* Not applicable. Spectral scan would happen in the operating span. |
| 6468 |
* QCA_WLAN_VENDOR_SPECTRAL_SCAN_MODE_AGILE |
| 6469 |
* This attribute is applicable only for agile spectral scan |
| 6470 |
* requests in 80+80 MHz mode. It represents center frequency (in |
| 6471 |
* MHz) of the secondary 80 MHz span or for convenience, center |
| 6472 |
* frequency (in MHz) of any channel in the secondary 80 MHz span. |
| 6473 |
* u32 attribute. |
| 6474 |
*/ |
| 6475 |
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_FREQUENCY_2 = 29, |
| 6476 |
/* This attribute specifies the bandwidth to be used for spectral scan |
| 6477 |
* operation. This is an u8 attribute and uses the values in enum |
| 6478 |
* nl80211_chan_width. This is an optional attribute. |
| 6479 |
* If this attribute is not populated, the driver should configure the |
| 6480 |
* spectral scan bandwidth to the maximum value supported by the target |
| 6481 |
* for the current operating bandwidth. |
| 6482 |
*/ |
| 6483 |
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_BANDWIDTH = 30, |
| 6484 |
|
| 6485 |
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_AFTER_LAST, |
| 6486 |
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_MAX = |
| 6487 |
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_AFTER_LAST - 1, |
| 6488 |
}; |
| 6489 |
|
| 6490 |
/** |
| 6491 |
* enum qca_wlan_vendor_attr_spectral_diag_stats - Used by the vendor command |
| 6492 |
* QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_DIAG_STATS. |
| 6493 |
*/ |
| 6494 |
enum qca_wlan_vendor_attr_spectral_diag_stats { |
| 6495 |
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_DIAG_INVALID = 0, |
| 6496 |
/* Number of spectral TLV signature mismatches. |
| 6497 |
* u64 attribute. |
| 6498 |
*/ |
| 6499 |
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_DIAG_SIG_MISMATCH = 1, |
| 6500 |
/* Number of spectral phyerror events with insufficient length when |
| 6501 |
* parsing for secondary 80 search FFT report. u64 attribute. |
| 6502 |
*/ |
| 6503 |
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_DIAG_SEC80_SFFT_INSUFFLEN = 2, |
| 6504 |
/* Number of spectral phyerror events without secondary 80 |
| 6505 |
* search FFT report. u64 attribute. |
| 6506 |
*/ |
| 6507 |
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_DIAG_NOSEC80_SFFT = 3, |
| 6508 |
/* Number of spectral phyerror events with vht operation segment 1 id |
| 6509 |
* mismatches in search fft report. u64 attribute. |
| 6510 |
*/ |
| 6511 |
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_DIAG_VHTSEG1ID_MISMATCH = 4, |
| 6512 |
/* Number of spectral phyerror events with vht operation segment 2 id |
| 6513 |
* mismatches in search fft report. u64 attribute. |
| 6514 |
*/ |
| 6515 |
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_DIAG_VHTSEG2ID_MISMATCH = 5, |
| 6516 |
|
| 6517 |
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_DIAG_AFTER_LAST, |
| 6518 |
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_DIAG_MAX = |
| 6519 |
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_DIAG_AFTER_LAST - 1, |
| 6520 |
}; |
| 6521 |
|
| 6522 |
/** |
| 6523 |
* enum qca_wlan_vendor_attr_spectral_cap - Used by the vendor command |
| 6524 |
* QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_CAP_INFO. |
| 6525 |
*/ |
| 6526 |
enum qca_wlan_vendor_attr_spectral_cap { |
| 6527 |
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_INVALID = 0, |
| 6528 |
/* Flag attribute to indicate phydiag capability */ |
| 6529 |
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_PHYDIAG = 1, |
| 6530 |
/* Flag attribute to indicate radar detection capability */ |
| 6531 |
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_RADAR = 2, |
| 6532 |
/* Flag attribute to indicate spectral capability */ |
| 6533 |
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_SPECTRAL = 3, |
| 6534 |
/* Flag attribute to indicate advanced spectral capability */ |
| 6535 |
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_ADVANCED_SPECTRAL = 4, |
| 6536 |
/* Spectral hardware generation. u32 attribute. |
| 6537 |
* It uses values defined in enum |
| 6538 |
* qca_wlan_vendor_spectral_scan_cap_hw_gen. |
| 6539 |
*/ |
| 6540 |
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_HW_GEN = 5, |
| 6541 |
/* Spectral bin scaling formula ID. u16 attribute. |
| 6542 |
* It uses values defined in enum |
| 6543 |
* qca_wlan_vendor_spectral_scan_cap_formula_id. |
| 6544 |
*/ |
| 6545 |
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_FORMULA_ID = 6, |
| 6546 |
/* Spectral bin scaling param - low level offset. |
| 6547 |
* s16 attribute. |
| 6548 |
*/ |
| 6549 |
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_LOW_LEVEL_OFFSET = 7, |
| 6550 |
/* Spectral bin scaling param - high level offset. |
| 6551 |
* s16 attribute. |
| 6552 |
*/ |
| 6553 |
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_HIGH_LEVEL_OFFSET = 8, |
| 6554 |
/* Spectral bin scaling param - RSSI threshold. |
| 6555 |
* s16 attribute. |
| 6556 |
*/ |
| 6557 |
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_RSSI_THR = 9, |
| 6558 |
/* Spectral bin scaling param - default AGC max gain. |
| 6559 |
* u8 attribute. |
| 6560 |
*/ |
| 6561 |
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_DEFAULT_AGC_MAX_GAIN = 10, |
| 6562 |
/* Flag attribute to indicate agile spectral scan capability |
| 6563 |
* for 20/40/80 MHz modes. |
| 6564 |
*/ |
| 6565 |
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_AGILE_SPECTRAL = 11, |
| 6566 |
/* Flag attribute to indicate agile spectral scan capability |
| 6567 |
* for 160 MHz mode. |
| 6568 |
*/ |
| 6569 |
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_AGILE_SPECTRAL_160 = 12, |
| 6570 |
/* Flag attribute to indicate agile spectral scan capability |
| 6571 |
* for 80+80 MHz mode. |
| 6572 |
*/ |
| 6573 |
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_AGILE_SPECTRAL_80_80 = 13, |
| 6574 |
/* Number of spectral detectors used for scan in 20 MHz. |
| 6575 |
* u32 attribute. |
| 6576 |
*/ |
| 6577 |
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_NUM_DETECTORS_20_MHZ = 14, |
| 6578 |
/* Number of spectral detectors used for scan in 40 MHz. |
| 6579 |
* u32 attribute. |
| 6580 |
*/ |
| 6581 |
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_NUM_DETECTORS_40_MHZ = 15, |
| 6582 |
/* Number of spectral detectors used for scan in 80 MHz. |
| 6583 |
* u32 attribute. |
| 6584 |
*/ |
| 6585 |
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_NUM_DETECTORS_80_MHZ = 16, |
| 6586 |
/* Number of spectral detectors used for scan in 160 MHz. |
| 6587 |
* u32 attribute. |
| 6588 |
*/ |
| 6589 |
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_NUM_DETECTORS_160_MHZ = 17, |
| 6590 |
/* Number of spectral detectors used for scan in 80+80 MHz. |
| 6591 |
* u32 attribute. |
| 6592 |
*/ |
| 6593 |
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_NUM_DETECTORS_80P80_MHZ = 18, |
| 6594 |
/* Flag attribute to indicate agile spectral scan capability |
| 6595 |
* for 320 MHz mode. |
| 6596 |
*/ |
| 6597 |
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_AGILE_SPECTRAL_320 = 19, |
| 6598 |
/* Number of spectral detectors used for scan in 320 MHz. |
| 6599 |
* u32 attribute. |
| 6600 |
*/ |
| 6601 |
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_NUM_DETECTORS_320_MHZ = 20, |
| 6602 |
|
| 6603 |
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_AFTER_LAST, |
| 6604 |
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_MAX = |
| 6605 |
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_AFTER_LAST - 1, |
| 6606 |
}; |
| 6607 |
|
| 6608 |
/** |
| 6609 |
* enum qca_wlan_vendor_attr_spectral_scan_status - used by the vendor command |
| 6610 |
* QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_STATUS. |
| 6611 |
*/ |
| 6612 |
enum qca_wlan_vendor_attr_spectral_scan_status { |
| 6613 |
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_STATUS_INVALID = 0, |
| 6614 |
/* Flag attribute to indicate whether spectral scan is enabled */ |
| 6615 |
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_STATUS_IS_ENABLED = 1, |
| 6616 |
/* Flag attribute to indicate whether spectral scan is in progress*/ |
| 6617 |
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_STATUS_IS_ACTIVE = 2, |
| 6618 |
/* Spectral scan mode. u32 attribute. |
| 6619 |
* It uses values defined in enum qca_wlan_vendor_spectral_scan_mode. |
| 6620 |
* If this attribute is not present, normal mode |
| 6621 |
* (QCA_WLAN_VENDOR_SPECTRAL_SCAN_MODE_NORMAL is assumed to be |
| 6622 |
* requested. |
| 6623 |
*/ |
| 6624 |
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_STATUS_MODE = 3, |
| 6625 |
|
| 6626 |
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_STATUS_AFTER_LAST, |
| 6627 |
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_STATUS_MAX = |
| 6628 |
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_STATUS_AFTER_LAST - 1, |
| 6629 |
}; |
| 6630 |
|
| 6631 |
/** |
| 6632 |
* qca_wlan_vendor_attr_spectral_scan_request_type: Attribute values for |
| 6633 |
* QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_REQUEST_TYPE to the vendor subcmd |
| 6634 |
* QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_START. This represents the |
| 6635 |
* spectral scan request types. |
| 6636 |
* @QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_REQUEST_TYPE_SCAN_AND_CONFIG: Request to |
| 6637 |
* set the spectral parameters and start scan. |
| 6638 |
* @QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_REQUEST_TYPE_SCAN: Request to |
| 6639 |
* only set the spectral parameters. |
| 6640 |
* @QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_REQUEST_TYPE_CONFIG: Request to |
| 6641 |
* only start the spectral scan. |
| 6642 |
*/ |
| 6643 |
enum qca_wlan_vendor_attr_spectral_scan_request_type { |
| 6644 |
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_REQUEST_TYPE_SCAN_AND_CONFIG, |
| 6645 |
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_REQUEST_TYPE_SCAN, |
| 6646 |
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_REQUEST_TYPE_CONFIG, |
| 6647 |
}; |
| 6648 |
|
| 6649 |
/** |
| 6650 |
* qca_wlan_vendor_spectral_scan_mode: Attribute values for |
| 6651 |
* QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_MODE in the vendor subcmd |
| 6652 |
* QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_START and |
| 6653 |
* QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_STATUS_MODE in the vendor subcmd |
| 6654 |
* QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_STATUS. This represents the |
| 6655 |
* spectral scan modes. |
| 6656 |
* @QCA_WLAN_VENDOR_SPECTRAL_SCAN_MODE_NORMAL: Normal spectral scan: |
| 6657 |
* spectral scan in the current operating span. |
| 6658 |
* @QCA_WLAN_VENDOR_SPECTRAL_SCAN_MODE_AGILE: Agile spectral scan: |
| 6659 |
* spectral scan in the configured agile span. |
| 6660 |
*/ |
| 6661 |
enum qca_wlan_vendor_spectral_scan_mode { |
| 6662 |
QCA_WLAN_VENDOR_SPECTRAL_SCAN_MODE_NORMAL = 0, |
| 6663 |
QCA_WLAN_VENDOR_SPECTRAL_SCAN_MODE_AGILE = 1, |
| 6664 |
}; |
| 6665 |
|
| 6666 |
/** |
| 6667 |
* qca_wlan_vendor_spectral_scan_error_code: Attribute values for |
| 6668 |
* QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_ERROR_CODE in the vendor subcmd |
| 6669 |
* QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_START. |
| 6670 |
* @QCA_WLAN_VENDOR_SPECTRAL_SCAN_ERR_PARAM_UNSUPPORTED: Changing the value |
| 6671 |
* of a parameter is not supported. |
| 6672 |
* @QCA_WLAN_VENDOR_SPECTRAL_SCAN_ERR_MODE_UNSUPPORTED: Requested spectral scan |
| 6673 |
* mode is not supported. |
| 6674 |
* @QCA_WLAN_VENDOR_SPECTRAL_SCAN_ERR_PARAM_INVALID_VALUE: A parameter |
| 6675 |
* has invalid value. |
| 6676 |
* @QCA_WLAN_VENDOR_SPECTRAL_SCAN_ERR_PARAM_NOT_INITIALIZED: A parameter |
| 6677 |
* is not initialized. |
| 6678 |
*/ |
| 6679 |
enum qca_wlan_vendor_spectral_scan_error_code { |
| 6680 |
QCA_WLAN_VENDOR_SPECTRAL_SCAN_ERR_PARAM_UNSUPPORTED = 0, |
| 6681 |
QCA_WLAN_VENDOR_SPECTRAL_SCAN_ERR_MODE_UNSUPPORTED = 1, |
| 6682 |
QCA_WLAN_VENDOR_SPECTRAL_SCAN_ERR_PARAM_INVALID_VALUE = 2, |
| 6683 |
QCA_WLAN_VENDOR_SPECTRAL_SCAN_ERR_PARAM_NOT_INITIALIZED = 3, |
| 6684 |
}; |
| 6685 |
|
| 6686 |
/** |
| 6687 |
* qca_wlan_vendor_spectral_scan_cap_hw_gen: Attribute values for |
| 6688 |
* QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_HW_GEN to the vendor subcmd |
| 6689 |
* QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_CAP_INFO. This represents the |
| 6690 |
* spectral hardware generation. |
| 6691 |
* @QCA_WLAN_VENDOR_SPECTRAL_SCAN_CAP_HW_GEN_1: generation 1 |
| 6692 |
* @QCA_WLAN_VENDOR_SPECTRAL_SCAN_CAP_HW_GEN_2: generation 2 |
| 6693 |
* @QCA_WLAN_VENDOR_SPECTRAL_SCAN_CAP_HW_GEN_3: generation 3 |
| 6694 |
*/ |
| 6695 |
enum qca_wlan_vendor_spectral_scan_cap_hw_gen { |
| 6696 |
QCA_WLAN_VENDOR_SPECTRAL_SCAN_CAP_HW_GEN_1 = 0, |
| 6697 |
QCA_WLAN_VENDOR_SPECTRAL_SCAN_CAP_HW_GEN_2 = 1, |
| 6698 |
QCA_WLAN_VENDOR_SPECTRAL_SCAN_CAP_HW_GEN_3 = 2, |
| 6699 |
}; |
| 6700 |
|
| 6701 |
enum qca_wlan_vendor_tos { |
| 6702 |
QCA_WLAN_VENDOR_TOS_BK = 0, |
| 6703 |
QCA_WLAN_VENDOR_TOS_BE = 1, |
| 6704 |
QCA_WLAN_VENDOR_TOS_VI = 2, |
| 6705 |
QCA_WLAN_VENDOR_TOS_VO = 3, |
| 6706 |
}; |
| 6707 |
|
| 6708 |
/** |
| 6709 |
* enum qca_wlan_vendor_attr_active_tos - Used by the vendor command |
| 6710 |
* QCA_NL80211_VENDOR_SUBCMD_ACTIVE_TOS. |
| 6711 |
*/ |
| 6712 |
enum qca_wlan_vendor_attr_active_tos { |
| 6713 |
QCA_WLAN_VENDOR_ATTR_ACTIVE_TOS_INVALID = 0, |
| 6714 |
/* Type Of Service - Represented by qca_wlan_vendor_tos */ |
| 6715 |
QCA_WLAN_VENDOR_ATTR_ACTIVE_TOS = 1, |
| 6716 |
/* Flag attribute representing the start (attribute included) or stop |
| 6717 |
* (attribute not included) of the respective TOS. |
| 6718 |
*/ |
| 6719 |
QCA_WLAN_VENDOR_ATTR_ACTIVE_TOS_START = 2, |
| 6720 |
}; |
| 6721 |
|
| 6722 |
enum qca_wlan_vendor_hang_reason { |
| 6723 |
/* Unspecified reason */ |
| 6724 |
QCA_WLAN_HANG_REASON_UNSPECIFIED = 0, |
| 6725 |
/* No Map for the MAC entry for the received frame */ |
| 6726 |
QCA_WLAN_HANG_RX_HASH_NO_ENTRY_FOUND = 1, |
| 6727 |
/* Peer deletion timeout happened */ |
| 6728 |
QCA_WLAN_HANG_PEER_DELETION_TIMEDOUT = 2, |
| 6729 |
/* Peer unmap timeout */ |
| 6730 |
QCA_WLAN_HANG_PEER_UNMAP_TIMEDOUT = 3, |
| 6731 |
/* Scan request timed out */ |
| 6732 |
QCA_WLAN_HANG_SCAN_REQ_EXPIRED = 4, |
| 6733 |
/* Consecutive Scan attempt failures */ |
| 6734 |
QCA_WLAN_HANG_SCAN_ATTEMPT_FAILURES = 5, |
| 6735 |
/* Unable to get the message buffer */ |
| 6736 |
QCA_WLAN_HANG_GET_MSG_BUFF_FAILURE = 6, |
| 6737 |
/* Current command processing is timedout */ |
| 6738 |
QCA_WLAN_HANG_ACTIVE_LIST_TIMEOUT = 7, |
| 6739 |
/* Timeout for an ACK from FW for suspend request */ |
| 6740 |
QCA_WLAN_HANG_SUSPEND_TIMEOUT = 8, |
| 6741 |
/* Timeout for an ACK from FW for resume request */ |
| 6742 |
QCA_WLAN_HANG_RESUME_TIMEOUT = 9, |
| 6743 |
/* Transmission timeout for consecutive data frames */ |
| 6744 |
QCA_WLAN_HANG_TRANSMISSIONS_TIMEOUT = 10, |
| 6745 |
/* Timeout for the TX completion status of data frame */ |
| 6746 |
QCA_WLAN_HANG_TX_COMPLETE_TIMEOUT = 11, |
| 6747 |
/* DXE failure for TX/RX, DXE resource unavailability */ |
| 6748 |
QCA_WLAN_HANG_DXE_FAILURE = 12, |
| 6749 |
/* WMI pending commands exceed the maximum count */ |
| 6750 |
QCA_WLAN_HANG_WMI_EXCEED_MAX_PENDING_CMDS = 13, |
| 6751 |
/* Timeout for peer STA connection accept command's response from the |
| 6752 |
* FW in AP mode. This command is triggered when a STA (peer) connects |
| 6753 |
* to AP (DUT). |
| 6754 |
*/ |
| 6755 |
QCA_WLAN_HANG_AP_STA_CONNECT_REQ_TIMEOUT = 14, |
| 6756 |
/* Timeout for the AP connection accept command's response from the FW |
| 6757 |
* in STA mode. This command is triggered when the STA (DUT) connects |
| 6758 |
* to an AP (peer). |
| 6759 |
*/ |
| 6760 |
QCA_WLAN_HANG_STA_AP_CONNECT_REQ_TIMEOUT = 15, |
| 6761 |
/* Timeout waiting for the response to the MAC HW mode change command |
| 6762 |
* sent to FW as a part of MAC mode switch among DBS (Dual Band |
| 6763 |
* Simultaneous), SCC (Single Channel Concurrency), and MCC (Multi |
| 6764 |
* Channel Concurrency) mode. |
| 6765 |
*/ |
| 6766 |
QCA_WLAN_HANG_MAC_HW_MODE_CHANGE_TIMEOUT = 16, |
| 6767 |
/* Timeout waiting for the response from FW to configure the MAC HW's |
| 6768 |
* mode. This operation is to configure the single/two MACs in either |
| 6769 |
* SCC/MCC/DBS mode. |
| 6770 |
*/ |
| 6771 |
QCA_WLAN_HANG_MAC_HW_MODE_CONFIG_TIMEOUT = 17, |
| 6772 |
/* Timeout waiting for response of VDEV start command from the FW */ |
| 6773 |
QCA_WLAN_HANG_VDEV_START_RESPONSE_TIMED_OUT = 18, |
| 6774 |
/* Timeout waiting for response of VDEV restart command from the FW */ |
| 6775 |
QCA_WLAN_HANG_VDEV_RESTART_RESPONSE_TIMED_OUT = 19, |
| 6776 |
/* Timeout waiting for response of VDEV stop command from the FW */ |
| 6777 |
QCA_WLAN_HANG_VDEV_STOP_RESPONSE_TIMED_OUT = 20, |
| 6778 |
/* Timeout waiting for response of VDEV delete command from the FW */ |
| 6779 |
QCA_WLAN_HANG_VDEV_DELETE_RESPONSE_TIMED_OUT = 21, |
| 6780 |
/* Timeout waiting for response of peer all delete request command to |
| 6781 |
* the FW on a specific VDEV. |
| 6782 |
*/ |
| 6783 |
QCA_WLAN_HANG_VDEV_PEER_DELETE_ALL_RESPONSE_TIMED_OUT = 22, |
| 6784 |
/* WMI sequence mismatch between WMI command and Tx completion */ |
| 6785 |
QCA_WLAN_HANG_WMI_BUF_SEQUENCE_MISMATCH = 23, |
| 6786 |
/* Write to Device HAL register failed */ |
| 6787 |
QCA_WLAN_HANG_REG_WRITE_FAILURE = 24, |
| 6788 |
/* No credit left to send the wow_wakeup_from_sleep to firmware */ |
| 6789 |
QCA_WLAN_HANG_SUSPEND_NO_CREDIT = 25, |
| 6790 |
/* Bus failure */ |
| 6791 |
QCA_WLAN_HANG_BUS_FAILURE = 26, |
| 6792 |
/* tasklet/credit latency found */ |
| 6793 |
QCA_WLAN_HANG_TASKLET_CREDIT_LATENCY_DETECT = 27, |
| 6794 |
}; |
| 6795 |
|
| 6796 |
/** |
| 6797 |
* enum qca_wlan_vendor_attr_hang - Used by the vendor command |
| 6798 |
* QCA_NL80211_VENDOR_SUBCMD_HANG. |
| 6799 |
*/ |
| 6800 |
enum qca_wlan_vendor_attr_hang { |
| 6801 |
QCA_WLAN_VENDOR_ATTR_HANG_INVALID = 0, |
| 6802 |
/* Reason for the hang - u32 attribute with a value from enum |
| 6803 |
* qca_wlan_vendor_hang_reason. |
| 6804 |
*/ |
| 6805 |
QCA_WLAN_VENDOR_ATTR_HANG_REASON = 1, |
| 6806 |
/* The binary blob data associated with the hang reason specified by |
| 6807 |
* QCA_WLAN_VENDOR_ATTR_HANG_REASON. This binary data is expected to |
| 6808 |
* contain the required dump to analyze the reason for the hang. |
| 6809 |
* NLA_BINARY attribute, the max size is 1024 bytes. |
| 6810 |
*/ |
| 6811 |
QCA_WLAN_VENDOR_ATTR_HANG_REASON_DATA = 2, |
| 6812 |
|
| 6813 |
QCA_WLAN_VENDOR_ATTR_HANG_AFTER_LAST, |
| 6814 |
QCA_WLAN_VENDOR_ATTR_HANG_MAX = |
| 6815 |
QCA_WLAN_VENDOR_ATTR_HANG_AFTER_LAST - 1, |
| 6816 |
}; |
| 6817 |
|
| 6818 |
/** |
| 6819 |
* enum qca_wlan_vendor_attr_flush_pending - Attributes for |
| 6820 |
* flushing pending traffic in firmware. |
| 6821 |
* |
| 6822 |
* @QCA_WLAN_VENDOR_ATTR_PEER_ADDR: Configure peer MAC address. |
| 6823 |
* @QCA_WLAN_VENDOR_ATTR_AC: Configure access category of the pending |
| 6824 |
* packets. It is u8 value with bit 0~3 represent AC_BE, AC_BK, |
| 6825 |
* AC_VI, AC_VO respectively. Set the corresponding bit to 1 to |
| 6826 |
* flush packets with access category. |
| 6827 |
*/ |
| 6828 |
enum qca_wlan_vendor_attr_flush_pending { |
| 6829 |
QCA_WLAN_VENDOR_ATTR_FLUSH_PENDING_INVALID = 0, |
| 6830 |
QCA_WLAN_VENDOR_ATTR_PEER_ADDR = 1, |
| 6831 |
QCA_WLAN_VENDOR_ATTR_AC = 2, |
| 6832 |
|
| 6833 |
/* keep last */ |
| 6834 |
QCA_WLAN_VENDOR_ATTR_FLUSH_PENDING_AFTER_LAST, |
| 6835 |
QCA_WLAN_VENDOR_ATTR_FLUSH_PENDING_MAX = |
| 6836 |
QCA_WLAN_VENDOR_ATTR_FLUSH_PENDING_AFTER_LAST - 1, |
| 6837 |
}; |
| 6838 |
|
| 6839 |
/** |
| 6840 |
* qca_wlan_vendor_spectral_scan_cap_formula_id: Attribute values for |
| 6841 |
* QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_FORMULA_ID in the vendor subcmd |
| 6842 |
* QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_CAP_INFO. This represents the |
| 6843 |
* Spectral bin scaling formula ID. |
| 6844 |
* @QCA_WLAN_VENDOR_SPECTRAL_SCAN_CAP_NO_SCALING: No scaling |
| 6845 |
* @QCA_WLAN_VENDOR_SPECTRAL_SCAN_CAP_AGC_GAIN_RSSI_CORR_BASED: AGC gain |
| 6846 |
* and RSSI threshold based formula. |
| 6847 |
*/ |
| 6848 |
enum qca_wlan_vendor_spectral_scan_cap_formula_id { |
| 6849 |
QCA_WLAN_VENDOR_SPECTRAL_SCAN_CAP_NO_SCALING = 0, |
| 6850 |
QCA_WLAN_VENDOR_SPECTRAL_SCAN_CAP_AGC_GAIN_RSSI_CORR_BASED = 1, |
| 6851 |
}; |
| 6852 |
|
| 6853 |
/** |
| 6854 |
* enum qca_wlan_vendor_attr_rropavail_info - Specifies whether Representative |
| 6855 |
* RF Operating Parameter (RROP) information is available, and if so, at which |
| 6856 |
* point in the application-driver interaction sequence it can be retrieved by |
| 6857 |
* the application from the driver. This point may vary by architecture and |
| 6858 |
* other factors. This is a u16 value. |
| 6859 |
*/ |
| 6860 |
enum qca_wlan_vendor_attr_rropavail_info { |
| 6861 |
/* RROP information is unavailable. */ |
| 6862 |
QCA_WLAN_VENDOR_ATTR_RROPAVAIL_INFO_UNAVAILABLE, |
| 6863 |
/* RROP information is available and the application can retrieve the |
| 6864 |
* information after receiving an QCA_NL80211_VENDOR_SUBCMD_EXTERNAL_ACS |
| 6865 |
* event from the driver. |
| 6866 |
*/ |
| 6867 |
QCA_WLAN_VENDOR_ATTR_RROPAVAIL_INFO_EXTERNAL_ACS_START, |
| 6868 |
/* RROP information is available only after a vendor specific scan |
| 6869 |
* (requested using QCA_NL80211_VENDOR_SUBCMD_TRIGGER_SCAN) has |
| 6870 |
* successfully completed. The application can retrieve the information |
| 6871 |
* after receiving the QCA_NL80211_VENDOR_SUBCMD_SCAN_DONE event from |
| 6872 |
* the driver. |
| 6873 |
*/ |
| 6874 |
QCA_WLAN_VENDOR_ATTR_RROPAVAIL_INFO_VSCAN_END, |
| 6875 |
}; |
| 6876 |
|
| 6877 |
/** |
| 6878 |
* enum qca_wlan_vendor_attr_rrop_info - Specifies vendor specific |
| 6879 |
* Representative RF Operating Parameter (RROP) information. It is sent for the |
| 6880 |
* vendor command QCA_NL80211_VENDOR_SUBCMD_GET_RROP_INFO. This information is |
| 6881 |
* intended for use by external Auto Channel Selection applications. It provides |
| 6882 |
* guidance values for some RF parameters that are used by the system during |
| 6883 |
* operation. These values could vary by channel, band, radio, and so on. |
| 6884 |
*/ |
| 6885 |
enum qca_wlan_vendor_attr_rrop_info { |
| 6886 |
QCA_WLAN_VENDOR_ATTR_RROP_INFO_INVALID = 0, |
| 6887 |
|
| 6888 |
/* Representative Tx Power List (RTPL) which has an array of nested |
| 6889 |
* values as per attributes in enum qca_wlan_vendor_attr_rtplinst. |
| 6890 |
*/ |
| 6891 |
QCA_WLAN_VENDOR_ATTR_RROP_INFO_RTPL = 1, |
| 6892 |
|
| 6893 |
QCA_WLAN_VENDOR_ATTR_RROP_INFO_AFTER_LAST, |
| 6894 |
QCA_WLAN_VENDOR_ATTR_RROP_INFO_MAX = |
| 6895 |
QCA_WLAN_VENDOR_ATTR_RROP_INFO_AFTER_LAST - 1 |
| 6896 |
}; |
| 6897 |
|
| 6898 |
/** |
| 6899 |
* enum qca_wlan_vendor_attr_rtplinst - Specifies attributes for individual list |
| 6900 |
* entry instances in the Representative Tx Power List (RTPL). It provides |
| 6901 |
* simplified power values intended for helping external Auto channel Selection |
| 6902 |
* applications compare potential Tx power performance between channels, other |
| 6903 |
* operating conditions remaining identical. These values are not necessarily |
| 6904 |
* the actual Tx power values that will be used by the system. They are also not |
| 6905 |
* necessarily the max or average values that will be used. Instead, they are |
| 6906 |
* relative, summarized keys for algorithmic use computed by the driver or |
| 6907 |
* underlying firmware considering a number of vendor specific factors. |
| 6908 |
*/ |
| 6909 |
enum qca_wlan_vendor_attr_rtplinst { |
| 6910 |
QCA_WLAN_VENDOR_ATTR_RTPLINST_INVALID = 0, |
| 6911 |
|
| 6912 |
/* Primary channel number (u8). |
| 6913 |
* Note: If both the driver and user space application support the |
| 6914 |
* 6 GHz band, this attribute is deprecated and |
| 6915 |
* QCA_WLAN_VENDOR_ATTR_RTPLINST_PRIMARY_FREQUENCY should be used. To |
| 6916 |
* maintain backward compatibility, |
| 6917 |
* QCA_WLAN_VENDOR_ATTR_RTPLINST_PRIMARY is still used if either the |
| 6918 |
* driver or user space application or both do not support the 6 GHz |
| 6919 |
* band. |
| 6920 |
*/ |
| 6921 |
QCA_WLAN_VENDOR_ATTR_RTPLINST_PRIMARY = 1, |
| 6922 |
/* Representative Tx power in dBm (s32) with emphasis on throughput. */ |
| 6923 |
QCA_WLAN_VENDOR_ATTR_RTPLINST_TXPOWER_THROUGHPUT = 2, |
| 6924 |
/* Representative Tx power in dBm (s32) with emphasis on range. */ |
| 6925 |
QCA_WLAN_VENDOR_ATTR_RTPLINST_TXPOWER_RANGE = 3, |
| 6926 |
/* Primary channel center frequency (u32) in MHz */ |
| 6927 |
QCA_WLAN_VENDOR_ATTR_RTPLINST_PRIMARY_FREQUENCY = 4, |
| 6928 |
|
| 6929 |
QCA_WLAN_VENDOR_ATTR_RTPLINST_AFTER_LAST, |
| 6930 |
QCA_WLAN_VENDOR_ATTR_RTPLINST_MAX = |
| 6931 |
QCA_WLAN_VENDOR_ATTR_RTPLINST_AFTER_LAST - 1, |
| 6932 |
}; |
| 6933 |
|
| 6934 |
/** |
| 6935 |
* enum qca_wlan_vendor_attr_config_latency_level - Level for |
| 6936 |
* wlan latency module. |
| 6937 |
* |
| 6938 |
* There will be various of Wi-Fi functionality like scan/roaming/adaptive |
| 6939 |
* power saving which would causing data exchange out of service, this |
| 6940 |
* would be a big impact on latency. For latency sensitive applications over |
| 6941 |
* Wi-Fi are intolerant to such operations and thus would configure them |
| 6942 |
* to meet their respective needs. It is well understood by such applications |
| 6943 |
* that altering the default behavior would degrade the Wi-Fi functionality |
| 6944 |
* w.r.t the above pointed WLAN operations. |
| 6945 |
* |
| 6946 |
* @QCA_WLAN_VENDOR_ATTR_CONFIG_LATENCY_LEVEL_NORMAL: |
| 6947 |
* Default WLAN operation level which throughput orientated. |
| 6948 |
* @QCA_WLAN_VENDOR_ATTR_CONFIG_LATENCY_LEVEL_MODERATE: |
| 6949 |
* Use moderate level to improve latency by limit scan duration. |
| 6950 |
* @QCA_WLAN_VENDOR_ATTR_CONFIG_LATENCY_LEVEL_LOW: |
| 6951 |
* Use low latency level to benifit application like concurrent |
| 6952 |
* downloading or video streaming via constraint scan/adaptive PS. |
| 6953 |
* @QCA_WLAN_VENDOR_ATTR_CONFIG_LATENCY_LEVEL_ULTRALOW: |
| 6954 |
* Use ultra low latency level to benefit for gaming/voice |
| 6955 |
* application via constraint scan/roaming/adaptive PS. |
| 6956 |
*/ |
| 6957 |
enum qca_wlan_vendor_attr_config_latency_level { |
| 6958 |
QCA_WLAN_VENDOR_ATTR_CONFIG_LATENCY_LEVEL_INVALID = 0, |
| 6959 |
QCA_WLAN_VENDOR_ATTR_CONFIG_LATENCY_LEVEL_NORMAL = 1, |
| 6960 |
QCA_WLAN_VENDOR_ATTR_CONFIG_LATENCY_LEVEL_MODERATE = 2, |
| 6961 |
QCA_WLAN_VENDOR_ATTR_CONFIG_LATENCY_LEVEL_LOW = 3, |
| 6962 |
QCA_WLAN_VENDOR_ATTR_CONFIG_LATENCY_LEVEL_ULTRALOW = 4, |
| 6963 |
|
| 6964 |
/* keep last */ |
| 6965 |
QCA_WLAN_VENDOR_ATTR_CONFIG_LATENCY_LEVEL_AFTER_LAST, |
| 6966 |
QCA_WLAN_VENDOR_ATTR_CONFIG_LATENCY_LEVEL_MAX = |
| 6967 |
QCA_WLAN_VENDOR_ATTR_CONFIG_LATENCY_LEVEL_AFTER_LAST - 1, |
| 6968 |
}; |
| 6969 |
|
| 6970 |
/** |
| 6971 |
* enum qca_wlan_vendor_attr_wlan_mac - Used by the vendor command |
| 6972 |
* QCA_NL80211_VENDOR_SUBCMD_WLAN_MAC_INFO. |
| 6973 |
*/ |
| 6974 |
enum qca_wlan_vendor_attr_mac { |
| 6975 |
QCA_WLAN_VENDOR_ATTR_MAC_INVALID = 0, |
| 6976 |
|
| 6977 |
/* MAC mode info list which has an array of nested values as |
| 6978 |
* per attributes in enum qca_wlan_vendor_attr_mac_mode_info. |
| 6979 |
*/ |
| 6980 |
QCA_WLAN_VENDOR_ATTR_MAC_INFO = 1, |
| 6981 |
|
| 6982 |
/* keep last */ |
| 6983 |
QCA_WLAN_VENDOR_ATTR_MAC_AFTER_LAST, |
| 6984 |
QCA_WLAN_VENDOR_ATTR_MAC_MAX = |
| 6985 |
QCA_WLAN_VENDOR_ATTR_MAC_AFTER_LAST - 1, |
| 6986 |
}; |
| 6987 |
|
| 6988 |
/** |
| 6989 |
* enum qca_wlan_vendor_attr_mac_iface_info - Information of the connected |
| 6990 |
* Wi-Fi netdev interface on a respective MAC. |
| 6991 |
* Used by the attribute QCA_WLAN_VENDOR_ATTR_MAC_IFACE_INFO. |
| 6992 |
*/ |
| 6993 |
enum qca_wlan_vendor_attr_mac_iface_info { |
| 6994 |
QCA_WLAN_VENDOR_ATTR_MAC_IFACE_INFO_INVALID = 0, |
| 6995 |
/* Wi-Fi netdev's interface index (u32) */ |
| 6996 |
QCA_WLAN_VENDOR_ATTR_MAC_IFACE_INFO_IFINDEX = 1, |
| 6997 |
/* Associated frequency in MHz of the connected Wi-Fi interface (u32) */ |
| 6998 |
QCA_WLAN_VENDOR_ATTR_MAC_IFACE_INFO_FREQ = 2, |
| 6999 |
|
| 7000 |
/* keep last */ |
| 7001 |
QCA_WLAN_VENDOR_ATTR_MAC_IFACE_INFO_AFTER_LAST, |
| 7002 |
QCA_WLAN_VENDOR_ATTR_MAC_IFACE_INFO_MAX = |
| 7003 |
QCA_WLAN_VENDOR_ATTR_MAC_IFACE_INFO_AFTER_LAST - 1, |
| 7004 |
}; |
| 7005 |
|
| 7006 |
/** |
| 7007 |
* enum qca_wlan_vendor_attr_mac_info - Points to MAC the information. |
| 7008 |
* Used by the attribute QCA_WLAN_VENDOR_ATTR_MAC_INFO of the |
| 7009 |
* vendor command QCA_NL80211_VENDOR_SUBCMD_WLAN_MAC_INFO. |
| 7010 |
*/ |
| 7011 |
enum qca_wlan_vendor_attr_mac_info { |
| 7012 |
QCA_WLAN_VENDOR_ATTR_MAC_INFO_INVALID = 0, |
| 7013 |
/* Hardware MAC ID associated for the MAC (u32) */ |
| 7014 |
QCA_WLAN_VENDOR_ATTR_MAC_INFO_MAC_ID = 1, |
| 7015 |
/* Band supported by the MAC at a given point. |
| 7016 |
* This is a u32 bitmask of BIT(NL80211_BAND_*) as described in %enum |
| 7017 |
* nl80211_band. |
| 7018 |
*/ |
| 7019 |
QCA_WLAN_VENDOR_ATTR_MAC_INFO_BAND = 2, |
| 7020 |
/* Refers to list of WLAN netdev interfaces associated with this MAC. |
| 7021 |
* Represented by enum qca_wlan_vendor_attr_mac_iface_info. |
| 7022 |
*/ |
| 7023 |
QCA_WLAN_VENDOR_ATTR_MAC_IFACE_INFO = 3, |
| 7024 |
|
| 7025 |
/* keep last */ |
| 7026 |
QCA_WLAN_VENDOR_ATTR_MAC_INFO_AFTER_LAST, |
| 7027 |
QCA_WLAN_VENDOR_ATTR_MAC_INFO_MAX = |
| 7028 |
QCA_WLAN_VENDOR_ATTR_MAC_INFO_AFTER_LAST - 1, |
| 7029 |
}; |
| 7030 |
|
| 7031 |
/** |
| 7032 |
* enum qca_wlan_vendor_attr_get_logger_features - Used by the vendor command |
| 7033 |
* QCA_NL80211_VENDOR_SUBCMD_GET_LOGGER_FEATURE_SET. |
| 7034 |
*/ |
| 7035 |
enum qca_wlan_vendor_attr_get_logger_features { |
| 7036 |
QCA_WLAN_VENDOR_ATTR_LOGGER_INVALID = 0, |
| 7037 |
/* Unsigned 32-bit enum value of wifi_logger_supported_features */ |
| 7038 |
QCA_WLAN_VENDOR_ATTR_LOGGER_SUPPORTED = 1, |
| 7039 |
/* keep last */ |
| 7040 |
QCA_WLAN_VENDOR_ATTR_LOGGER_AFTER_LAST, |
| 7041 |
QCA_WLAN_VENDOR_ATTR_LOGGER_MAX = |
| 7042 |
QCA_WLAN_VENDOR_ATTR_LOGGER_AFTER_LAST - 1, |
| 7043 |
}; |
| 7044 |
|
| 7045 |
/** |
| 7046 |
* enum wifi_logger_supported_features - Values for supported logger features |
| 7047 |
*/ |
| 7048 |
enum wifi_logger_supported_features { |
| 7049 |
WIFI_LOGGER_MEMORY_DUMP_FEATURE = (1 << (0)), |
| 7050 |
WIFI_LOGGER_PER_PACKET_TX_RX_STATUS_FEATURE = (1 << (1)), |
| 7051 |
WIFI_LOGGER_CONNECT_EVENT_FEATURE = (1 << (2)), |
| 7052 |
WIFI_LOGGER_POWER_EVENT_FEATURE = (1 << (3)), |
| 7053 |
WIFI_LOGGER_WAKE_LOCK_FEATURE = (1 << (4)), |
| 7054 |
WIFI_LOGGER_VERBOSE_FEATURE = (1 << (5)), |
| 7055 |
WIFI_LOGGER_WATCHDOG_TIMER_FEATURE = (1 << (6)), |
| 7056 |
WIFI_LOGGER_DRIVER_DUMP_FEATURE = (1 << (7)), |
| 7057 |
WIFI_LOGGER_PACKET_FATE_FEATURE = (1 << (8)), |
| 7058 |
}; |
| 7059 |
|
| 7060 |
/** |
| 7061 |
* enum qca_wlan_tdls_caps_features_supported - Values for TDLS get |
| 7062 |
* capabilities features |
| 7063 |
*/ |
| 7064 |
enum qca_wlan_tdls_caps_features_supported { |
| 7065 |
WIFI_TDLS_SUPPORT = (1 << (0)), |
| 7066 |
WIFI_TDLS_EXTERNAL_CONTROL_SUPPORT = (1 << (1)), |
| 7067 |
WIFI_TDLS_OFFCHANNEL_SUPPORT = (1 << (2)) |
| 7068 |
}; |
| 7069 |
|
| 7070 |
/** |
| 7071 |
* enum qca_wlan_vendor_attr_tdls_get_capabilities - Used by the vendor command |
| 7072 |
* QCA_NL80211_VENDOR_SUBCMD_TDLS_GET_CAPABILITIES. |
| 7073 |
*/ |
| 7074 |
enum qca_wlan_vendor_attr_tdls_get_capabilities { |
| 7075 |
QCA_WLAN_VENDOR_ATTR_TDLS_GET_CAPS_INVALID = 0, |
| 7076 |
/* Indicates the max concurrent sessions */ |
| 7077 |
/* Unsigned 32-bit value */ |
| 7078 |
QCA_WLAN_VENDOR_ATTR_TDLS_GET_CAPS_MAX_CONC_SESSIONS, |
| 7079 |
/* Indicates the support for features */ |
| 7080 |
/* Unsigned 32-bit bitmap qca_wlan_tdls_caps_features_supported |
| 7081 |
*/ |
| 7082 |
QCA_WLAN_VENDOR_ATTR_TDLS_GET_CAPS_FEATURES_SUPPORTED, |
| 7083 |
|
| 7084 |
/* keep last */ |
| 7085 |
QCA_WLAN_VENDOR_ATTR_TDLS_GET_CAPS_AFTER_LAST, |
| 7086 |
QCA_WLAN_VENDOR_ATTR_TDLS_GET_CAPS_MAX = |
| 7087 |
QCA_WLAN_VENDOR_ATTR_TDLS_GET_CAPS_AFTER_LAST - 1, |
| 7088 |
}; |
| 7089 |
|
| 7090 |
/** |
| 7091 |
* enum qca_wlan_offloaded_packets_sending_control - Offload packets control |
| 7092 |
* command used as value for the attribute |
| 7093 |
* QCA_WLAN_VENDOR_ATTR_OFFLOADED_PACKETS_SENDING_CONTROL. |
| 7094 |
*/ |
| 7095 |
enum qca_wlan_offloaded_packets_sending_control { |
| 7096 |
QCA_WLAN_OFFLOADED_PACKETS_SENDING_CONTROL_INVALID = 0, |
| 7097 |
QCA_WLAN_OFFLOADED_PACKETS_SENDING_START, |
| 7098 |
QCA_WLAN_OFFLOADED_PACKETS_SENDING_STOP |
| 7099 |
}; |
| 7100 |
|
| 7101 |
/** |
| 7102 |
* enum qca_wlan_vendor_attr_offloaded_packets - Used by the vendor command |
| 7103 |
* QCA_NL80211_VENDOR_SUBCMD_OFFLOADED_PACKETS. |
| 7104 |
*/ |
| 7105 |
enum qca_wlan_vendor_attr_offloaded_packets { |
| 7106 |
QCA_WLAN_VENDOR_ATTR_OFFLOADED_PACKETS_INVALID = 0, |
| 7107 |
/* Takes valid value from the enum |
| 7108 |
* qca_wlan_offloaded_packets_sending_control |
| 7109 |
* Unsigned 32-bit value |
| 7110 |
*/ |
| 7111 |
QCA_WLAN_VENDOR_ATTR_OFFLOADED_PACKETS_SENDING_CONTROL, |
| 7112 |
/* Unsigned 32-bit value */ |
| 7113 |
QCA_WLAN_VENDOR_ATTR_OFFLOADED_PACKETS_REQUEST_ID, |
| 7114 |
/* array of u8 len: Max packet size */ |
| 7115 |
QCA_WLAN_VENDOR_ATTR_OFFLOADED_PACKETS_IP_PACKET_DATA, |
| 7116 |
/* 6-byte MAC address used to represent source MAC address */ |
| 7117 |
QCA_WLAN_VENDOR_ATTR_OFFLOADED_PACKETS_SRC_MAC_ADDR, |
| 7118 |
/* 6-byte MAC address used to represent destination MAC address */ |
| 7119 |
QCA_WLAN_VENDOR_ATTR_OFFLOADED_PACKETS_DST_MAC_ADDR, |
| 7120 |
/* Unsigned 32-bit value, in milli seconds */ |
| 7121 |
QCA_WLAN_VENDOR_ATTR_OFFLOADED_PACKETS_PERIOD, |
| 7122 |
/* This optional unsigned 16-bit attribute is used for specifying |
| 7123 |
* ethernet protocol type. If not specified ethertype defaults to IPv4. |
| 7124 |
*/ |
| 7125 |
QCA_WLAN_VENDOR_ATTR_OFFLOADED_PACKETS_ETHER_PROTO_TYPE, |
| 7126 |
|
| 7127 |
/* keep last */ |
| 7128 |
QCA_WLAN_VENDOR_ATTR_OFFLOADED_PACKETS_AFTER_LAST, |
| 7129 |
QCA_WLAN_VENDOR_ATTR_OFFLOADED_PACKETS_MAX = |
| 7130 |
QCA_WLAN_VENDOR_ATTR_OFFLOADED_PACKETS_AFTER_LAST - 1, |
| 7131 |
}; |
| 7132 |
|
| 7133 |
/** |
| 7134 |
* enum qca_wlan_rssi_monitoring_control - RSSI control commands used as values |
| 7135 |
* by the attribute QCA_WLAN_VENDOR_ATTR_RSSI_MONITORING_CONTROL. |
| 7136 |
*/ |
| 7137 |
enum qca_wlan_rssi_monitoring_control { |
| 7138 |
QCA_WLAN_RSSI_MONITORING_CONTROL_INVALID = 0, |
| 7139 |
QCA_WLAN_RSSI_MONITORING_START, |
| 7140 |
QCA_WLAN_RSSI_MONITORING_STOP, |
| 7141 |
}; |
| 7142 |
|
| 7143 |
/** |
| 7144 |
* enum qca_wlan_vendor_attr_rssi_monitoring - Used by the vendor command |
| 7145 |
* QCA_NL80211_VENDOR_SUBCMD_MONITOR_RSSI. |
| 7146 |
*/ |
| 7147 |
enum qca_wlan_vendor_attr_rssi_monitoring { |
| 7148 |
QCA_WLAN_VENDOR_ATTR_RSSI_MONITORING_INVALID = 0, |
| 7149 |
/* Takes valid value from the enum |
| 7150 |
* qca_wlan_rssi_monitoring_control |
| 7151 |
* Unsigned 32-bit value enum qca_wlan_rssi_monitoring_control |
| 7152 |
*/ |
| 7153 |
QCA_WLAN_VENDOR_ATTR_RSSI_MONITORING_CONTROL, |
| 7154 |
/* Unsigned 32-bit value */ |
| 7155 |
QCA_WLAN_VENDOR_ATTR_RSSI_MONITORING_REQUEST_ID, |
| 7156 |
/* Signed 8-bit value in dBm */ |
| 7157 |
QCA_WLAN_VENDOR_ATTR_RSSI_MONITORING_MAX_RSSI, |
| 7158 |
/* Signed 8-bit value in dBm */ |
| 7159 |
QCA_WLAN_VENDOR_ATTR_RSSI_MONITORING_MIN_RSSI, |
| 7160 |
/* attributes to be used/received in callback */ |
| 7161 |
/* 6-byte MAC address used to represent current BSSID MAC address */ |
| 7162 |
QCA_WLAN_VENDOR_ATTR_RSSI_MONITORING_CUR_BSSID, |
| 7163 |
/* Signed 8-bit value indicating the current RSSI */ |
| 7164 |
QCA_WLAN_VENDOR_ATTR_RSSI_MONITORING_CUR_RSSI, |
| 7165 |
/* keep last */ |
| 7166 |
QCA_WLAN_VENDOR_ATTR_RSSI_MONITORING_AFTER_LAST, |
| 7167 |
QCA_WLAN_VENDOR_ATTR_RSSI_MONITORING_MAX = |
| 7168 |
QCA_WLAN_VENDOR_ATTR_RSSI_MONITORING_AFTER_LAST - 1, |
| 7169 |
}; |
| 7170 |
|
| 7171 |
/** |
| 7172 |
* enum qca_wlan_vendor_attr_ndp_params - Used by the vendor command |
| 7173 |
* QCA_NL80211_VENDOR_SUBCMD_NDP. |
| 7174 |
*/ |
| 7175 |
enum qca_wlan_vendor_attr_ndp_params { |
| 7176 |
QCA_WLAN_VENDOR_ATTR_NDP_PARAM_INVALID = 0, |
| 7177 |
/* Unsigned 32-bit value |
| 7178 |
* enum of sub commands values in qca_wlan_ndp_sub_cmd |
| 7179 |
*/ |
| 7180 |
QCA_WLAN_VENDOR_ATTR_NDP_SUBCMD, |
| 7181 |
/* Unsigned 16-bit value */ |
| 7182 |
QCA_WLAN_VENDOR_ATTR_NDP_TRANSACTION_ID, |
| 7183 |
/* NL attributes for data used NDP SUB cmds */ |
| 7184 |
/* Unsigned 32-bit value indicating a service info */ |
| 7185 |
QCA_WLAN_VENDOR_ATTR_NDP_SERVICE_INSTANCE_ID, |
| 7186 |
/* Unsigned 32-bit value; channel frequency in MHz */ |
| 7187 |
QCA_WLAN_VENDOR_ATTR_NDP_CHANNEL, |
| 7188 |
/* Interface Discovery MAC address. An array of 6 Unsigned int8 */ |
| 7189 |
QCA_WLAN_VENDOR_ATTR_NDP_PEER_DISCOVERY_MAC_ADDR, |
| 7190 |
/* Interface name on which NDP is being created */ |
| 7191 |
QCA_WLAN_VENDOR_ATTR_NDP_IFACE_STR, |
| 7192 |
/* Unsigned 32-bit value for security */ |
| 7193 |
/* CONFIG_SECURITY is deprecated, use NCS_SK_TYPE/PMK/SCID instead */ |
| 7194 |
QCA_WLAN_VENDOR_ATTR_NDP_CONFIG_SECURITY, |
| 7195 |
/* Unsigned 32-bit value for QoS */ |
| 7196 |
QCA_WLAN_VENDOR_ATTR_NDP_CONFIG_QOS, |
| 7197 |
/* Array of u8: len = QCA_WLAN_VENDOR_ATTR_NAN_DP_APP_INFO_LEN */ |
| 7198 |
QCA_WLAN_VENDOR_ATTR_NDP_APP_INFO, |
| 7199 |
/* Unsigned 32-bit value for NDP instance Id */ |
| 7200 |
QCA_WLAN_VENDOR_ATTR_NDP_INSTANCE_ID, |
| 7201 |
/* Array of instance Ids */ |
| 7202 |
QCA_WLAN_VENDOR_ATTR_NDP_INSTANCE_ID_ARRAY, |
| 7203 |
/* Unsigned 32-bit value for initiator/responder NDP response code |
| 7204 |
* accept/reject |
| 7205 |
*/ |
| 7206 |
QCA_WLAN_VENDOR_ATTR_NDP_RESPONSE_CODE, |
| 7207 |
/* NDI MAC address. An array of 6 Unsigned int8 */ |
| 7208 |
QCA_WLAN_VENDOR_ATTR_NDP_NDI_MAC_ADDR, |
| 7209 |
/* Unsigned 32-bit value errors types returned by driver |
| 7210 |
* The wifi_nan.h in AOSP project platform/hardware/libhardware_legacy |
| 7211 |
* NanStatusType includes these values. |
| 7212 |
*/ |
| 7213 |
QCA_WLAN_VENDOR_ATTR_NDP_DRV_RESPONSE_STATUS_TYPE, |
| 7214 |
/* Unsigned 32-bit value error values returned by driver |
| 7215 |
* The nan_i.h in AOSP project platform/hardware/qcom/wlan |
| 7216 |
* NanInternalStatusType includes these values. |
| 7217 |
*/ |
| 7218 |
QCA_WLAN_VENDOR_ATTR_NDP_DRV_RETURN_VALUE, |
| 7219 |
/* Unsigned 32-bit value for Channel setup configuration |
| 7220 |
* The wifi_nan.h in AOSP project platform/hardware/libhardware_legacy |
| 7221 |
* NanDataPathChannelCfg includes these values. |
| 7222 |
*/ |
| 7223 |
QCA_WLAN_VENDOR_ATTR_NDP_CHANNEL_CONFIG, |
| 7224 |
/* Unsigned 32-bit value for Cipher Suite Shared Key Type */ |
| 7225 |
QCA_WLAN_VENDOR_ATTR_NDP_CSID, |
| 7226 |
/* Array of u8: len = NAN_PMK_INFO_LEN 32 bytes */ |
| 7227 |
QCA_WLAN_VENDOR_ATTR_NDP_PMK, |
| 7228 |
/* Security Context Identifier that contains the PMKID |
| 7229 |
* Array of u8: len = NAN_SCID_BUF_LEN 1024 bytes |
| 7230 |
*/ |
| 7231 |
QCA_WLAN_VENDOR_ATTR_NDP_SCID, |
| 7232 |
/* Array of u8: len = NAN_SECURITY_MAX_PASSPHRASE_LEN 63 bytes */ |
| 7233 |
QCA_WLAN_VENDOR_ATTR_NDP_PASSPHRASE, |
| 7234 |
/* Array of u8: len = NAN_MAX_SERVICE_NAME_LEN 255 bytes */ |
| 7235 |
QCA_WLAN_VENDOR_ATTR_NDP_SERVICE_NAME, |
| 7236 |
/* Unsigned 32-bit bitmap indicating schedule update |
| 7237 |
* BIT_0: NSS Update |
| 7238 |
* BIT_1: Channel list update |
| 7239 |
*/ |
| 7240 |
QCA_WLAN_VENDOR_ATTR_NDP_SCHEDULE_UPDATE_REASON, |
| 7241 |
/* Unsigned 32-bit value for NSS */ |
| 7242 |
QCA_WLAN_VENDOR_ATTR_NDP_NSS, |
| 7243 |
/* Unsigned 32-bit value for NUMBER NDP CHANNEL */ |
| 7244 |
QCA_WLAN_VENDOR_ATTR_NDP_NUM_CHANNELS, |
| 7245 |
/* Unsigned 32-bit value for CHANNEL BANDWIDTH |
| 7246 |
* 0:20 MHz, 1:40 MHz, 2:80 MHz, 3:160 MHz |
| 7247 |
*/ |
| 7248 |
QCA_WLAN_VENDOR_ATTR_NDP_CHANNEL_WIDTH, |
| 7249 |
/* Array of channel/band width */ |
| 7250 |
QCA_WLAN_VENDOR_ATTR_NDP_CHANNEL_INFO, |
| 7251 |
/* IPv6 address used by NDP (in network byte order), 16 bytes array. |
| 7252 |
* This attribute is used and optional for ndp request, ndp response, |
| 7253 |
* ndp indication, and ndp confirm. |
| 7254 |
*/ |
| 7255 |
QCA_WLAN_VENDOR_ATTR_NDP_IPV6_ADDR = 27, |
| 7256 |
/* Unsigned 16-bit value indicating transport port used by NDP. |
| 7257 |
* This attribute is used and optional for ndp response, ndp indication, |
| 7258 |
* and ndp confirm. |
| 7259 |
*/ |
| 7260 |
QCA_WLAN_VENDOR_ATTR_NDP_TRANSPORT_PORT = 28, |
| 7261 |
/* Unsigned 8-bit value indicating protocol used by NDP and assigned by |
| 7262 |
* the Internet Assigned Numbers Authority (IANA) as per: |
| 7263 |
* https://www.iana.org/assignments/protocol-numbers/protocol-numbers.xhtml |
| 7264 |
* This attribute is used and optional for ndp response, ndp indication, |
| 7265 |
* and ndp confirm. |
| 7266 |
*/ |
| 7267 |
QCA_WLAN_VENDOR_ATTR_NDP_TRANSPORT_PROTOCOL = 29, |
| 7268 |
/* Unsigned 8-bit value indicating if NDP remote peer supports NAN NDPE. |
| 7269 |
* 1:support 0:not support |
| 7270 |
*/ |
| 7271 |
QCA_WLAN_VENDOR_ATTR_PEER_NDPE_SUPPORT = 30, |
| 7272 |
|
| 7273 |
/* keep last */ |
| 7274 |
QCA_WLAN_VENDOR_ATTR_NDP_PARAMS_AFTER_LAST, |
| 7275 |
QCA_WLAN_VENDOR_ATTR_NDP_PARAMS_MAX = |
| 7276 |
QCA_WLAN_VENDOR_ATTR_NDP_PARAMS_AFTER_LAST - 1, |
| 7277 |
}; |
| 7278 |
|
| 7279 |
enum qca_wlan_ndp_sub_cmd { |
| 7280 |
QCA_WLAN_VENDOR_ATTR_NDP_INVALID = 0, |
| 7281 |
/* Command to create a NAN data path interface */ |
| 7282 |
QCA_WLAN_VENDOR_ATTR_NDP_INTERFACE_CREATE = 1, |
| 7283 |
/* Command to delete a NAN data path interface */ |
| 7284 |
QCA_WLAN_VENDOR_ATTR_NDP_INTERFACE_DELETE = 2, |
| 7285 |
/* Command to initiate a NAN data path session */ |
| 7286 |
QCA_WLAN_VENDOR_ATTR_NDP_INITIATOR_REQUEST = 3, |
| 7287 |
/* Command to notify if the NAN data path session was sent */ |
| 7288 |
QCA_WLAN_VENDOR_ATTR_NDP_INITIATOR_RESPONSE = 4, |
| 7289 |
/* Command to respond to NAN data path session */ |
| 7290 |
QCA_WLAN_VENDOR_ATTR_NDP_RESPONDER_REQUEST = 5, |
| 7291 |
/* Command to notify on the responder about the response */ |
| 7292 |
QCA_WLAN_VENDOR_ATTR_NDP_RESPONDER_RESPONSE = 6, |
| 7293 |
/* Command to initiate a NAN data path end */ |
| 7294 |
QCA_WLAN_VENDOR_ATTR_NDP_END_REQUEST = 7, |
| 7295 |
/* Command to notify the if end request was sent */ |
| 7296 |
QCA_WLAN_VENDOR_ATTR_NDP_END_RESPONSE = 8, |
| 7297 |
/* Command to notify the peer about the end request */ |
| 7298 |
QCA_WLAN_VENDOR_ATTR_NDP_REQUEST_IND = 9, |
| 7299 |
/* Command to confirm the NAN data path session is complete */ |
| 7300 |
QCA_WLAN_VENDOR_ATTR_NDP_CONFIRM_IND = 10, |
| 7301 |
/* Command to indicate the peer about the end request being received */ |
| 7302 |
QCA_WLAN_VENDOR_ATTR_NDP_END_IND = 11, |
| 7303 |
/* Command to indicate the peer of schedule update */ |
| 7304 |
QCA_WLAN_VENDOR_ATTR_NDP_SCHEDULE_UPDATE_IND = 12 |
| 7305 |
}; |
| 7306 |
|
| 7307 |
/** |
| 7308 |
* enum qca_wlan_vendor_attr_nd_offload - Used by the vendor command |
| 7309 |
* QCA_NL80211_VENDOR_SUBCMD_ND_OFFLOAD. |
| 7310 |
*/ |
| 7311 |
enum qca_wlan_vendor_attr_nd_offload { |
| 7312 |
QCA_WLAN_VENDOR_ATTR_ND_OFFLOAD_INVALID = 0, |
| 7313 |
/* Flag to set Neighbour Discovery offload */ |
| 7314 |
QCA_WLAN_VENDOR_ATTR_ND_OFFLOAD_FLAG, |
| 7315 |
/* Keep last */ |
| 7316 |
QCA_WLAN_VENDOR_ATTR_ND_OFFLOAD_AFTER_LAST, |
| 7317 |
QCA_WLAN_VENDOR_ATTR_ND_OFFLOAD_MAX = |
| 7318 |
QCA_WLAN_VENDOR_ATTR_ND_OFFLOAD_AFTER_LAST - 1, |
| 7319 |
}; |
| 7320 |
|
| 7321 |
/** |
| 7322 |
* enum packet_filter_sub_cmd - Packet filter sub commands |
| 7323 |
*/ |
| 7324 |
enum packet_filter_sub_cmd { |
| 7325 |
/** |
| 7326 |
* Write packet filter program and/or data. The driver/firmware should |
| 7327 |
* disable APF before writing into local buffer and re-enable APF after |
| 7328 |
* writing is done. |
| 7329 |
*/ |
| 7330 |
QCA_WLAN_SET_PACKET_FILTER = 1, |
| 7331 |
/* Get packet filter feature capabilities from driver */ |
| 7332 |
QCA_WLAN_GET_PACKET_FILTER = 2, |
| 7333 |
/** |
| 7334 |
* Write packet filter program and/or data. User space will send the |
| 7335 |
* %QCA_WLAN_DISABLE_PACKET_FILTER command before issuing this command |
| 7336 |
* and will send the %QCA_WLAN_ENABLE_PACKET_FILTER afterwards. The key |
| 7337 |
* difference from that %QCA_WLAN_SET_PACKET_FILTER is the control over |
| 7338 |
* enable/disable is given to user space with this command. Also, |
| 7339 |
* user space sends the length of program portion in the buffer within |
| 7340 |
* %QCA_WLAN_VENDOR_ATTR_PACKET_FILTER_PROG_LENGTH. |
| 7341 |
*/ |
| 7342 |
QCA_WLAN_WRITE_PACKET_FILTER = 3, |
| 7343 |
/* Read packet filter program and/or data */ |
| 7344 |
QCA_WLAN_READ_PACKET_FILTER = 4, |
| 7345 |
/* Enable APF feature */ |
| 7346 |
QCA_WLAN_ENABLE_PACKET_FILTER = 5, |
| 7347 |
/* Disable APF feature */ |
| 7348 |
QCA_WLAN_DISABLE_PACKET_FILTER = 6, |
| 7349 |
}; |
| 7350 |
|
| 7351 |
/** |
| 7352 |
* enum qca_wlan_vendor_attr_packet_filter - BPF control commands used by |
| 7353 |
* vendor QCA_NL80211_VENDOR_SUBCMD_PACKET_FILTER. |
| 7354 |
*/ |
| 7355 |
enum qca_wlan_vendor_attr_packet_filter { |
| 7356 |
QCA_WLAN_VENDOR_ATTR_PACKET_FILTER_INVALID = 0, |
| 7357 |
/* Unsigned 32-bit enum passed using packet_filter_sub_cmd */ |
| 7358 |
QCA_WLAN_VENDOR_ATTR_PACKET_FILTER_SUB_CMD, |
| 7359 |
/* Unsigned 32-bit value indicating the packet filter version */ |
| 7360 |
QCA_WLAN_VENDOR_ATTR_PACKET_FILTER_VERSION, |
| 7361 |
/* Unsigned 32-bit value indicating the packet filter id */ |
| 7362 |
QCA_WLAN_VENDOR_ATTR_PACKET_FILTER_ID, |
| 7363 |
/** |
| 7364 |
* Unsigned 32-bit value indicating the packet filter size including |
| 7365 |
* program + data. |
| 7366 |
*/ |
| 7367 |
QCA_WLAN_VENDOR_ATTR_PACKET_FILTER_SIZE, |
| 7368 |
/* Unsigned 32-bit value indicating the packet filter current offset */ |
| 7369 |
QCA_WLAN_VENDOR_ATTR_PACKET_FILTER_CURRENT_OFFSET, |
| 7370 |
/* Program and/or data in bytes */ |
| 7371 |
QCA_WLAN_VENDOR_ATTR_PACKET_FILTER_PROGRAM, |
| 7372 |
/* Unsigned 32-bit value of the length of the program section in packet |
| 7373 |
* filter buffer. |
| 7374 |
*/ |
| 7375 |
QCA_WLAN_VENDOR_ATTR_PACKET_FILTER_PROG_LENGTH = 7, |
| 7376 |
|
| 7377 |
/* keep last */ |
| 7378 |
QCA_WLAN_VENDOR_ATTR_PACKET_FILTER_AFTER_LAST, |
| 7379 |
QCA_WLAN_VENDOR_ATTR_PACKET_FILTER_MAX = |
| 7380 |
QCA_WLAN_VENDOR_ATTR_PACKET_FILTER_AFTER_LAST - 1, |
| 7381 |
}; |
| 7382 |
|
| 7383 |
/** |
| 7384 |
* enum qca_wlan_vendor_drv_info - WLAN driver info used by vendor command |
| 7385 |
* QCA_NL80211_VENDOR_SUBCMD_GET_BUS_SIZE. |
| 7386 |
*/ |
| 7387 |
enum qca_wlan_vendor_drv_info { |
| 7388 |
QCA_WLAN_VENDOR_ATTR_DRV_INFO_INVALID = 0, |
| 7389 |
/* Maximum Message size info between firmware & HOST |
| 7390 |
* Unsigned 32-bit value |
| 7391 |
*/ |
| 7392 |
QCA_WLAN_VENDOR_ATTR_DRV_INFO_BUS_SIZE, |
| 7393 |
/* keep last */ |
| 7394 |
QCA_WLAN_VENDOR_ATTR_DRV_INFO_AFTER_LAST, |
| 7395 |
QCA_WLAN_VENDOR_ATTR_DRV_INFO_MAX = |
| 7396 |
QCA_WLAN_VENDOR_ATTR_DRV_INFO_AFTER_LAST - 1, |
| 7397 |
}; |
| 7398 |
|
| 7399 |
/** |
| 7400 |
* enum qca_wlan_vendor_attr_wake_stats - Wake lock stats used by vendor |
| 7401 |
* command QCA_NL80211_VENDOR_SUBCMD_GET_WAKE_REASON_STATS. |
| 7402 |
*/ |
| 7403 |
enum qca_wlan_vendor_attr_wake_stats { |
| 7404 |
QCA_WLAN_VENDOR_ATTR_WAKE_STATS_INVALID = 0, |
| 7405 |
/* Unsigned 32-bit value indicating the total count of wake event */ |
| 7406 |
QCA_WLAN_VENDOR_ATTR_WAKE_STATS_TOTAL_CMD_EVENT_WAKE, |
| 7407 |
/* Array of individual wake count, each index representing wake reason |
| 7408 |
*/ |
| 7409 |
QCA_WLAN_VENDOR_ATTR_WAKE_STATS_CMD_EVENT_WAKE_CNT_PTR, |
| 7410 |
/* Unsigned 32-bit value representing wake count array */ |
| 7411 |
QCA_WLAN_VENDOR_ATTR_WAKE_STATS_CMD_EVENT_WAKE_CNT_SZ, |
| 7412 |
/* Unsigned 32-bit total wake count value of driver/fw */ |
| 7413 |
QCA_WLAN_VENDOR_ATTR_WAKE_STATS_TOTAL_DRIVER_FW_LOCAL_WAKE, |
| 7414 |
/* Array of wake stats of driver/fw */ |
| 7415 |
QCA_WLAN_VENDOR_ATTR_WAKE_STATS_DRIVER_FW_LOCAL_WAKE_CNT_PTR, |
| 7416 |
/* Unsigned 32-bit total wake count value of driver/fw */ |
| 7417 |
QCA_WLAN_VENDOR_ATTR_WAKE_STATS_DRIVER_FW_LOCAL_WAKE_CNT_SZ, |
| 7418 |
/* Unsigned 32-bit total wake count value of packets received */ |
| 7419 |
QCA_WLAN_VENDOR_ATTR_WAKE_STATS_TOTAL_RX_DATA_WAKE, |
| 7420 |
/* Unsigned 32-bit wake count value unicast packets received */ |
| 7421 |
QCA_WLAN_VENDOR_ATTR_WAKE_STATS_RX_UNICAST_CNT, |
| 7422 |
/* Unsigned 32-bit wake count value multicast packets received */ |
| 7423 |
QCA_WLAN_VENDOR_ATTR_WAKE_STATS_RX_MULTICAST_CNT, |
| 7424 |
/* Unsigned 32-bit wake count value broadcast packets received */ |
| 7425 |
QCA_WLAN_VENDOR_ATTR_WAKE_STATS_RX_BROADCAST_CNT, |
| 7426 |
/* Unsigned 32-bit wake count value of ICMP packets */ |
| 7427 |
QCA_WLAN_VENDOR_ATTR_WAKE_STATS_ICMP_PKT, |
| 7428 |
/* Unsigned 32-bit wake count value of ICMP6 packets */ |
| 7429 |
QCA_WLAN_VENDOR_ATTR_WAKE_STATS_ICMP6_PKT, |
| 7430 |
/* Unsigned 32-bit value ICMP6 router advertisement */ |
| 7431 |
QCA_WLAN_VENDOR_ATTR_WAKE_STATS_ICMP6_RA, |
| 7432 |
/* Unsigned 32-bit value ICMP6 neighbor advertisement */ |
| 7433 |
QCA_WLAN_VENDOR_ATTR_WAKE_STATS_ICMP6_NA, |
| 7434 |
/* Unsigned 32-bit value ICMP6 neighbor solicitation */ |
| 7435 |
QCA_WLAN_VENDOR_ATTR_WAKE_STATS_ICMP6_NS, |
| 7436 |
/* Unsigned 32-bit wake count value of receive side ICMP4 multicast */ |
| 7437 |
QCA_WLAN_VENDOR_ATTR_WAKE_STATS_ICMP4_RX_MULTICAST_CNT, |
| 7438 |
/* Unsigned 32-bit wake count value of receive side ICMP6 multicast */ |
| 7439 |
QCA_WLAN_VENDOR_ATTR_WAKE_STATS_ICMP6_RX_MULTICAST_CNT, |
| 7440 |
/* Unsigned 32-bit wake count value of receive side multicast */ |
| 7441 |
QCA_WLAN_VENDOR_ATTR_WAKE_STATS_OTHER_RX_MULTICAST_CNT, |
| 7442 |
/* Unsigned 32-bit wake count value of a given RSSI breach */ |
| 7443 |
QCA_WLAN_VENDOR_ATTR_WAKE_STATS_RSSI_BREACH_CNT, |
| 7444 |
/* Unsigned 32-bit wake count value of low RSSI */ |
| 7445 |
QCA_WLAN_VENDOR_ATTR_WAKE_STATS_LOW_RSSI_CNT, |
| 7446 |
/* Unsigned 32-bit value GSCAN count */ |
| 7447 |
QCA_WLAN_VENDOR_ATTR_WAKE_STATS_GSCAN_CNT, |
| 7448 |
/* Unsigned 32-bit value PNO complete count */ |
| 7449 |
QCA_WLAN_VENDOR_ATTR_WAKE_STATS_PNO_COMPLETE_CNT, |
| 7450 |
/* Unsigned 32-bit value PNO match count */ |
| 7451 |
QCA_WLAN_VENDOR_ATTR_WAKE_STATS_PNO_MATCH_CNT, |
| 7452 |
/* keep last */ |
| 7453 |
QCA_WLAN_VENDOR_GET_WAKE_STATS_AFTER_LAST, |
| 7454 |
QCA_WLAN_VENDOR_GET_WAKE_STATS_MAX = |
| 7455 |
QCA_WLAN_VENDOR_GET_WAKE_STATS_AFTER_LAST - 1, |
| 7456 |
}; |
| 7457 |
|
| 7458 |
/** |
| 7459 |
* enum qca_wlan_vendor_thermal_level - Defines various thermal levels |
| 7460 |
* configured by userspace to the driver/firmware. |
| 7461 |
* The values can be encapsulated in QCA_WLAN_VENDOR_ATTR_THERMAL_LEVEL or |
| 7462 |
* QCA_WLAN_VENDOR_ATTR_THERMAL_EVENT_LEVEL attribute. |
| 7463 |
* The driver/firmware takes actions requested by userspace such as throttling |
| 7464 |
* wifi TX etc. in order to mitigate high temperature. |
| 7465 |
* |
| 7466 |
* @QCA_WLAN_VENDOR_THERMAL_LEVEL_NONE: Stop/clear all throttling actions. |
| 7467 |
* @QCA_WLAN_VENDOR_THERMAL_LEVEL_LIGHT: Throttle TX lightly. |
| 7468 |
* @QCA_WLAN_VENDOR_THERMAL_LEVEL_MODERATE: Throttle TX moderately. |
| 7469 |
* @QCA_WLAN_VENDOR_THERMAL_LEVEL_SEVERE: Throttle TX severely. |
| 7470 |
* @QCA_WLAN_VENDOR_THERMAL_LEVEL_CRITICAL: Critical thermal level reached. |
| 7471 |
* @QCA_WLAN_VENDOR_THERMAL_LEVEL_EMERGENCY: Emergency thermal level reached. |
| 7472 |
*/ |
| 7473 |
enum qca_wlan_vendor_thermal_level { |
| 7474 |
QCA_WLAN_VENDOR_THERMAL_LEVEL_NONE = 0, |
| 7475 |
QCA_WLAN_VENDOR_THERMAL_LEVEL_LIGHT = 1, |
| 7476 |
QCA_WLAN_VENDOR_THERMAL_LEVEL_MODERATE = 2, |
| 7477 |
QCA_WLAN_VENDOR_THERMAL_LEVEL_SEVERE = 3, |
| 7478 |
QCA_WLAN_VENDOR_THERMAL_LEVEL_CRITICAL = 4, |
| 7479 |
QCA_WLAN_VENDOR_THERMAL_LEVEL_EMERGENCY = 5, |
| 7480 |
}; |
| 7481 |
|
| 7482 |
/** |
| 7483 |
* enum qca_wlan_vendor_attr_thermal_cmd - Vendor subcmd attributes to set |
| 7484 |
* cmd value. Used for NL attributes for data used by |
| 7485 |
* QCA_NL80211_VENDOR_SUBCMD_THERMAL_CMD sub command. |
| 7486 |
*/ |
| 7487 |
enum qca_wlan_vendor_attr_thermal_cmd { |
| 7488 |
QCA_WLAN_VENDOR_ATTR_THERMAL_CMD_INVALID = 0, |
| 7489 |
/* The value of command, driver will implement different operations |
| 7490 |
* according to this value. It uses values defined in |
| 7491 |
* enum qca_wlan_vendor_attr_thermal_cmd_type. |
| 7492 |
* u32 attribute. |
| 7493 |
*/ |
| 7494 |
QCA_WLAN_VENDOR_ATTR_THERMAL_CMD_VALUE = 1, |
| 7495 |
/* Userspace uses this attribute to configure thermal level to the |
| 7496 |
* driver/firmware, or get thermal level from the driver/firmware. |
| 7497 |
* Used in request or response, u32 attribute, |
| 7498 |
* possible values are defined in enum qca_wlan_vendor_thermal_level. |
| 7499 |
*/ |
| 7500 |
QCA_WLAN_VENDOR_ATTR_THERMAL_LEVEL = 2, |
| 7501 |
/* Userspace uses this attribute to configure the time in which the |
| 7502 |
* driver/firmware should complete applying settings it received from |
| 7503 |
* userspace with QCA_WLAN_VENDOR_ATTR_THERMAL_CMD_TYPE_SET_LEVEL |
| 7504 |
* command type. Used in request, u32 attribute, value is in |
| 7505 |
* milliseconds. A value of zero indicates to apply the settings |
| 7506 |
* immediately. The driver/firmware can delay applying the configured |
| 7507 |
* thermal settings within the time specified in this attribute if |
| 7508 |
* there is any critical ongoing operation. |
| 7509 |
*/ |
| 7510 |
QCA_WLAN_VENDOR_ATTR_THERMAL_COMPLETION_WINDOW = 3, |
| 7511 |
/* Nested attribute, the driver/firmware uses this attribute to report |
| 7512 |
* thermal statistics of different thermal levels to userspace when |
| 7513 |
* requested using the |
| 7514 |
* QCA_WLAN_VENDOR_ATTR_THERMAL_CMD_TYPE_GET_THERMAL_STATS command |
| 7515 |
* type. This attribute contains a nested array of records of thermal |
| 7516 |
* statistics of multiple levels. The attributes used inside this nested |
| 7517 |
* attribute are defined in enum qca_wlan_vendor_attr_thermal_stats. |
| 7518 |
*/ |
| 7519 |
QCA_WLAN_VENDOR_ATTR_THERMAL_STATS = 4, |
| 7520 |
|
| 7521 |
/* keep last */ |
| 7522 |
QCA_WLAN_VENDOR_ATTR_THERMAL_CMD_AFTER_LAST, |
| 7523 |
QCA_WLAN_VENDOR_ATTR_THERMAL_CMD_MAX = |
| 7524 |
QCA_WLAN_VENDOR_ATTR_THERMAL_CMD_AFTER_LAST - 1 |
| 7525 |
}; |
| 7526 |
|
| 7527 |
/** |
| 7528 |
* qca_wlan_vendor_attr_thermal_cmd_type: Attribute values for |
| 7529 |
* QCA_WLAN_VENDOR_ATTR_THERMAL_CMD_VALUE to the vendor subcmd |
| 7530 |
* QCA_NL80211_VENDOR_SUBCMD_THERMAL_CMD. This represents the |
| 7531 |
* thermal command types sent to driver. |
| 7532 |
* @QCA_WLAN_VENDOR_ATTR_THERMAL_CMD_TYPE_GET_PARAMS: Request to |
| 7533 |
* get thermal shutdown configuration parameters for display. Parameters |
| 7534 |
* responded from driver are defined in |
| 7535 |
* enum qca_wlan_vendor_attr_get_thermal_params_rsp. |
| 7536 |
* @QCA_WLAN_VENDOR_ATTR_THERMAL_CMD_TYPE_GET_TEMPERATURE: Request to |
| 7537 |
* get temperature. Host should respond with a temperature data. It is defined |
| 7538 |
* in enum qca_wlan_vendor_attr_thermal_get_temperature. |
| 7539 |
* @QCA_WLAN_VENDOR_ATTR_THERMAL_CMD_TYPE_SUSPEND: Request to execute thermal |
| 7540 |
* suspend action. |
| 7541 |
* @QCA_WLAN_VENDOR_ATTR_THERMAL_CMD_TYPE_RESUME: Request to execute thermal |
| 7542 |
* resume action. |
| 7543 |
* @QCA_WLAN_VENDOR_ATTR_THERMAL_CMD_TYPE_SET_LEVEL: Configure thermal level to |
| 7544 |
* the driver/firmware. |
| 7545 |
* @QCA_WLAN_VENDOR_ATTR_THERMAL_CMD_TYPE_GET_LEVEL: Request to get the current |
| 7546 |
* thermal level from the driver/firmware. The driver should respond with a |
| 7547 |
* thermal level defined in enum qca_wlan_vendor_thermal_level. |
| 7548 |
* @QCA_WLAN_VENDOR_ATTR_THERMAL_CMD_TYPE_GET_THERMAL_STATS: Request to get the |
| 7549 |
* current thermal statistics from the driver/firmware. The driver should |
| 7550 |
* respond with statistics of all thermal levels encapsulated in the attribute |
| 7551 |
* QCA_WLAN_VENDOR_ATTR_THERMAL_STATS. |
| 7552 |
* @QCA_WLAN_VENDOR_ATTR_THERMAL_CMD_TYPE_CLEAR_THERMAL_STATS: Request to clear |
| 7553 |
* the current thermal statistics for all thermal levels maintained in the |
| 7554 |
* driver/firmware and start counting from zero again. |
| 7555 |
*/ |
| 7556 |
enum qca_wlan_vendor_attr_thermal_cmd_type { |
| 7557 |
QCA_WLAN_VENDOR_ATTR_THERMAL_CMD_TYPE_GET_PARAMS, |
| 7558 |
QCA_WLAN_VENDOR_ATTR_THERMAL_CMD_TYPE_GET_TEMPERATURE, |
| 7559 |
QCA_WLAN_VENDOR_ATTR_THERMAL_CMD_TYPE_SUSPEND, |
| 7560 |
QCA_WLAN_VENDOR_ATTR_THERMAL_CMD_TYPE_RESUME, |
| 7561 |
QCA_WLAN_VENDOR_ATTR_THERMAL_CMD_TYPE_SET_LEVEL, |
| 7562 |
QCA_WLAN_VENDOR_ATTR_THERMAL_CMD_TYPE_GET_LEVEL, |
| 7563 |
QCA_WLAN_VENDOR_ATTR_THERMAL_CMD_TYPE_GET_THERMAL_STATS, |
| 7564 |
QCA_WLAN_VENDOR_ATTR_THERMAL_CMD_TYPE_CLEAR_THERMAL_STATS, |
| 7565 |
}; |
| 7566 |
|
| 7567 |
/** |
| 7568 |
* enum qca_wlan_vendor_attr_thermal_get_temperature - vendor subcmd attributes |
| 7569 |
* to get chip temperature by user. |
| 7570 |
* enum values are used for NL attributes for data used by |
| 7571 |
* QCA_WLAN_VENDOR_ATTR_THERMAL_CMD_TYPE_GET_TEMPERATURE command for data used |
| 7572 |
* by QCA_NL80211_VENDOR_SUBCMD_THERMAL_CMD sub command. |
| 7573 |
*/ |
| 7574 |
enum qca_wlan_vendor_attr_thermal_get_temperature { |
| 7575 |
QCA_WLAN_VENDOR_ATTR_THERMAL_GET_TEMPERATURE_INVALID = 0, |
| 7576 |
/* Temperature value (degree Celsius) from driver. |
| 7577 |
* u32 attribute. |
| 7578 |
*/ |
| 7579 |
QCA_WLAN_VENDOR_ATTR_THERMAL_GET_TEMPERATURE_DATA, |
| 7580 |
|
| 7581 |
/* keep last */ |
| 7582 |
QCA_WLAN_VENDOR_ATTR_THERMAL_GET_TEMPERATURE_AFTER_LAST, |
| 7583 |
QCA_WLAN_VENDOR_ATTR_THERMAL_GET_TEMPERATURE_MAX = |
| 7584 |
QCA_WLAN_VENDOR_ATTR_THERMAL_GET_TEMPERATURE_AFTER_LAST - 1, |
| 7585 |
}; |
| 7586 |
|
| 7587 |
/** |
| 7588 |
* enum qca_wlan_vendor_attr_get_thermal_params_rsp - vendor subcmd attributes |
| 7589 |
* to get configuration parameters of thermal shutdown feature. Enum values are |
| 7590 |
* used by QCA_WLAN_VENDOR_ATTR_THERMAL_CMD_TYPE_GET_PARAMS command for data |
| 7591 |
* used by QCA_NL80211_VENDOR_SUBCMD_THERMAL_CMD sub command. |
| 7592 |
*/ |
| 7593 |
enum qca_wlan_vendor_attr_get_thermal_params_rsp { |
| 7594 |
QCA_WLAN_VENDOR_ATTR_GET_THERMAL_PARAMS_RSP_INVALID = 0, |
| 7595 |
/* Indicate if the thermal shutdown feature is enabled. |
| 7596 |
* NLA_FLAG attribute. |
| 7597 |
*/ |
| 7598 |
QCA_WLAN_VENDOR_ATTR_GET_THERMAL_PARAMS_RSP_SHUTDOWN_EN, |
| 7599 |
/* Indicate if the auto mode is enabled. |
| 7600 |
* Enable: Driver triggers the suspend/resume action. |
| 7601 |
* Disable: User space triggers the suspend/resume action. |
| 7602 |
* NLA_FLAG attribute. |
| 7603 |
*/ |
| 7604 |
QCA_WLAN_VENDOR_ATTR_GET_THERMAL_PARAMS_RSP_SHUTDOWN_AUTO_EN, |
| 7605 |
/* Thermal resume threshold (degree Celsius). Issue the resume command |
| 7606 |
* if the temperature value is lower than this threshold. |
| 7607 |
* u16 attribute. |
| 7608 |
*/ |
| 7609 |
QCA_WLAN_VENDOR_ATTR_GET_THERMAL_PARAMS_RSP_RESUME_THRESH, |
| 7610 |
/* Thermal warning threshold (degree Celsius). FW reports temperature |
| 7611 |
* to driver if it's higher than this threshold. |
| 7612 |
* u16 attribute. |
| 7613 |
*/ |
| 7614 |
QCA_WLAN_VENDOR_ATTR_GET_THERMAL_PARAMS_RSP_WARNING_THRESH, |
| 7615 |
/* Thermal suspend threshold (degree Celsius). Issue the suspend command |
| 7616 |
* if the temperature value is higher than this threshold. |
| 7617 |
* u16 attribute. |
| 7618 |
*/ |
| 7619 |
QCA_WLAN_VENDOR_ATTR_GET_THERMAL_PARAMS_RSP_SUSPEND_THRESH, |
| 7620 |
/* FW reports temperature data periodically at this interval (ms). |
| 7621 |
* u16 attribute. |
| 7622 |
*/ |
| 7623 |
QCA_WLAN_VENDOR_ATTR_GET_THERMAL_PARAMS_RSP_SAMPLE_RATE, |
| 7624 |
|
| 7625 |
/* keep last */ |
| 7626 |
QCA_WLAN_VENDOR_ATTR_GET_THERMAL_PARAMS_RSP_AFTER_LAST, |
| 7627 |
QCA_WLAN_VENDOR_ATTR_GET_THERMAL_PARAMS_RSP_MAX = |
| 7628 |
QCA_WLAN_VENDOR_ATTR_GET_THERMAL_PARAMS_RSP_AFTER_LAST - 1, |
| 7629 |
}; |
| 7630 |
|
| 7631 |
/** |
| 7632 |
* enum qca_wlan_vendor_attr_thermal_event - vendor subcmd attributes to |
| 7633 |
* report thermal events from driver to user space. |
| 7634 |
* enum values are used for NL attributes for data used by |
| 7635 |
* QCA_NL80211_VENDOR_SUBCMD_THERMAL_EVENT sub command. |
| 7636 |
*/ |
| 7637 |
enum qca_wlan_vendor_attr_thermal_event { |
| 7638 |
QCA_WLAN_VENDOR_ATTR_THERMAL_EVENT_INVALID = 0, |
| 7639 |
/* Temperature value (degree Celsius) from driver. |
| 7640 |
* u32 attribute. |
| 7641 |
*/ |
| 7642 |
QCA_WLAN_VENDOR_ATTR_THERMAL_EVENT_TEMPERATURE, |
| 7643 |
/* Indication of resume completion from power save mode. |
| 7644 |
* NLA_FLAG attribute. |
| 7645 |
*/ |
| 7646 |
QCA_WLAN_VENDOR_ATTR_THERMAL_EVENT_RESUME_COMPLETE, |
| 7647 |
/* Thermal level from the driver. |
| 7648 |
* u32 attribute. Possible values are defined in |
| 7649 |
* enum qca_wlan_vendor_thermal_level. |
| 7650 |
*/ |
| 7651 |
QCA_WLAN_VENDOR_ATTR_THERMAL_EVENT_LEVEL = 3, |
| 7652 |
|
| 7653 |
/* keep last */ |
| 7654 |
QCA_WLAN_VENDOR_ATTR_THERMAL_EVENT_AFTER_LAST, |
| 7655 |
QCA_WLAN_VENDOR_ATTR_THERMAL_EVENT_MAX = |
| 7656 |
QCA_WLAN_VENDOR_ATTR_THERMAL_EVENT_AFTER_LAST - 1, |
| 7657 |
}; |
| 7658 |
|
| 7659 |
/** |
| 7660 |
* enum qca_wlan_vendor_attr_thermal_stats - vendor subcmd attributes |
| 7661 |
* to get thermal status from the driver/firmware. |
| 7662 |
* enum values are used for NL attributes encapsulated inside the |
| 7663 |
* QCA_WLAN_VENDOR_ATTR_THERMAL_STATS nested attribute. |
| 7664 |
* |
| 7665 |
* QCA_WLAN_VENDOR_ATTR_THERMAL_STATS_MIN_TEMPERATURE: Minimum temperature |
| 7666 |
* of a thermal level in Celsius. u32 size. |
| 7667 |
* QCA_WLAN_VENDOR_ATTR_THERMAL_STATS_MAX_TEMPERATURE: Maximum temperature |
| 7668 |
* of a thermal level in Celsius. u32 size. |
| 7669 |
* QCA_WLAN_VENDOR_ATTR_THERMAL_STATS_DWELL_TIME: The total time spent on each |
| 7670 |
* thermal level in milliseconds. u32 size. |
| 7671 |
* QCA_WLAN_VENDOR_ATTR_THERMAL_STATS_TEMP_LEVEL_COUNTER: Indicates the number |
| 7672 |
* of times the temperature crossed into the temperature range defined by the |
| 7673 |
* thermal level from both higher and lower directions. u32 size. |
| 7674 |
*/ |
| 7675 |
enum qca_wlan_vendor_attr_thermal_stats { |
| 7676 |
QCA_WLAN_VENDOR_ATTR_THERMAL_STATS_INVALID = 0, |
| 7677 |
QCA_WLAN_VENDOR_ATTR_THERMAL_STATS_MIN_TEMPERATURE, |
| 7678 |
QCA_WLAN_VENDOR_ATTR_THERMAL_STATS_MAX_TEMPERATURE, |
| 7679 |
QCA_WLAN_VENDOR_ATTR_THERMAL_STATS_DWELL_TIME, |
| 7680 |
QCA_WLAN_VENDOR_ATTR_THERMAL_STATS_TEMP_LEVEL_COUNTER, |
| 7681 |
|
| 7682 |
/* keep last */ |
| 7683 |
QCA_WLAN_VENDOR_ATTR_THERMAL_STATS_AFTER_LAST, |
| 7684 |
QCA_WLAN_VENDOR_ATTR_THERMAL_STATS_MAX = |
| 7685 |
QCA_WLAN_VENDOR_ATTR_THERMAL_STATS_AFTER_LAST - 1, |
| 7686 |
}; |
| 7687 |
|
| 7688 |
/** |
| 7689 |
* enum he_fragmentation_val - HE fragmentation support values |
| 7690 |
* Indicates level of dynamic fragmentation that is supported by |
| 7691 |
* a STA as a recipient. |
| 7692 |
* HE fragmentation values are defined in IEEE P802.11ax/D2.0, 9.4.2.237.2 |
| 7693 |
* (HE MAC Capabilities Information field) and are used in HE Capabilities |
| 7694 |
* element to advertise the support. These values are validated in the driver |
| 7695 |
* to check the device capability and advertised in the HE Capabilities |
| 7696 |
* element. These values are used to configure testbed device to allow the |
| 7697 |
* advertised hardware capabilities to be downgraded for testing purposes. |
| 7698 |
* |
| 7699 |
* @HE_FRAG_DISABLE: no support for dynamic fragmentation |
| 7700 |
* @HE_FRAG_LEVEL1: support for dynamic fragments that are |
| 7701 |
* contained within an MPDU or S-MPDU, no support for dynamic fragments |
| 7702 |
* within an A-MPDU that is not an S-MPDU. |
| 7703 |
* @HE_FRAG_LEVEL2: support for dynamic fragments that are |
| 7704 |
* contained within an MPDU or S-MPDU and support for up to one dynamic |
| 7705 |
* fragment for each MSDU, each A-MSDU if supported by the recipient, and |
| 7706 |
* each MMPDU within an A-MPDU or multi-TID A-MPDU that is not an |
| 7707 |
* MPDU or S-MPDU. |
| 7708 |
* @HE_FRAG_LEVEL3: support for dynamic fragments that are |
| 7709 |
* contained within an MPDU or S-MPDU and support for multiple dynamic |
| 7710 |
* fragments for each MSDU and for each A-MSDU if supported by the |
| 7711 |
* recipient within an A-MPDU or multi-TID AMPDU and up to one dynamic |
| 7712 |
* fragment for each MMPDU in a multi-TID A-MPDU that is not an S-MPDU. |
| 7713 |
*/ |
| 7714 |
enum he_fragmentation_val { |
| 7715 |
HE_FRAG_DISABLE, |
| 7716 |
HE_FRAG_LEVEL1, |
| 7717 |
HE_FRAG_LEVEL2, |
| 7718 |
HE_FRAG_LEVEL3, |
| 7719 |
}; |
| 7720 |
|
| 7721 |
/** |
| 7722 |
* enum he_mcs_config - HE MCS support configuration |
| 7723 |
* |
| 7724 |
* Configures the HE Tx/Rx MCS map in HE capability IE for given bandwidth. |
| 7725 |
* These values are used in driver to configure the HE MCS map to advertise |
| 7726 |
* Tx/Rx MCS map in HE capability and these values are applied for all the |
| 7727 |
* streams supported by the device. To configure MCS for different bandwidths, |
| 7728 |
* vendor command needs to be sent using this attribute with appropriate value. |
| 7729 |
* For example, to configure HE_80_MCS_0_7, send vendor command using HE MCS |
| 7730 |
* attribute with HE_80_MCS0_7. And to configure HE MCS for HE_160_MCS0_11 |
| 7731 |
* send this command using HE MCS config attribute with value HE_160_MCS0_11. |
| 7732 |
* These values are used to configure testbed device to allow the advertised |
| 7733 |
* hardware capabilities to be downgraded for testing purposes. The enum values |
| 7734 |
* are defined such that BIT[1:0] indicates the MCS map value. Values 3,7 and |
| 7735 |
* 11 are not used as BIT[1:0] value is 3 which is used to disable MCS map. |
| 7736 |
* These values are validated in the driver before setting the MCS map and |
| 7737 |
* driver returns error if the input is other than these enum values. |
| 7738 |
* |
| 7739 |
* @HE_80_MCS0_7: support for HE 80/40/20 MHz MCS 0 to 7 |
| 7740 |
* @HE_80_MCS0_9: support for HE 80/40/20 MHz MCS 0 to 9 |
| 7741 |
* @HE_80_MCS0_11: support for HE 80/40/20 MHz MCS 0 to 11 |
| 7742 |
* @HE_160_MCS0_7: support for HE 160 MHz MCS 0 to 7 |
| 7743 |
* @HE_160_MCS0_9: support for HE 160 MHz MCS 0 to 9 |
| 7744 |
* @HE_160_MCS0_11: support for HE 160 MHz MCS 0 to 11 |
| 7745 |
* @HE_80P80_MCS0_7: support for HE 80p80 MHz MCS 0 to 7 |
| 7746 |
* @HE_80P80_MCS0_9: support for HE 80p80 MHz MCS 0 to 9 |
| 7747 |
* @HE_80P80_MCS0_11: support for HE 80p80 MHz MCS 0 to 11 |
| 7748 |
*/ |
| 7749 |
enum he_mcs_config { |
| 7750 |
HE_80_MCS0_7 = 0, |
| 7751 |
HE_80_MCS0_9 = 1, |
| 7752 |
HE_80_MCS0_11 = 2, |
| 7753 |
HE_160_MCS0_7 = 4, |
| 7754 |
HE_160_MCS0_9 = 5, |
| 7755 |
HE_160_MCS0_11 = 6, |
| 7756 |
HE_80P80_MCS0_7 = 8, |
| 7757 |
HE_80P80_MCS0_9 = 9, |
| 7758 |
HE_80P80_MCS0_11 = 10, |
| 7759 |
}; |
| 7760 |
|
| 7761 |
/** |
| 7762 |
* enum qca_wlan_ba_session_config - BA session configuration |
| 7763 |
* |
| 7764 |
* Indicates the configuration values for BA session configuration attribute. |
| 7765 |
* |
| 7766 |
* @QCA_WLAN_ADD_BA: Establish a new BA session with given configuration. |
| 7767 |
* @QCA_WLAN_DELETE_BA: Delete the existing BA session for given TID. |
| 7768 |
*/ |
| 7769 |
enum qca_wlan_ba_session_config { |
| 7770 |
QCA_WLAN_ADD_BA = 1, |
| 7771 |
QCA_WLAN_DELETE_BA = 2, |
| 7772 |
}; |
| 7773 |
|
| 7774 |
/** |
| 7775 |
* enum qca_wlan_ac_type - Access category type |
| 7776 |
* |
| 7777 |
* Indicates the access category type value. |
| 7778 |
* |
| 7779 |
* @QCA_WLAN_AC_BE: BE access category |
| 7780 |
* @QCA_WLAN_AC_BK: BK access category |
| 7781 |
* @QCA_WLAN_AC_VI: VI access category |
| 7782 |
* @QCA_WLAN_AC_VO: VO access category |
| 7783 |
* @QCA_WLAN_AC_ALL: All ACs |
| 7784 |
*/ |
| 7785 |
enum qca_wlan_ac_type { |
| 7786 |
QCA_WLAN_AC_BE = 0, |
| 7787 |
QCA_WLAN_AC_BK = 1, |
| 7788 |
QCA_WLAN_AC_VI = 2, |
| 7789 |
QCA_WLAN_AC_VO = 3, |
| 7790 |
QCA_WLAN_AC_ALL = 4, |
| 7791 |
}; |
| 7792 |
|
| 7793 |
/** |
| 7794 |
* enum qca_wlan_he_ltf_cfg - HE LTF configuration |
| 7795 |
* |
| 7796 |
* Indicates the HE LTF configuration value. |
| 7797 |
* |
| 7798 |
* @QCA_WLAN_HE_LTF_AUTO: HE-LTF is automatically set to the mandatory HE-LTF, |
| 7799 |
* based on the GI setting |
| 7800 |
* @QCA_WLAN_HE_LTF_1X: 1X HE LTF is 3.2us LTF |
| 7801 |
* @QCA_WLAN_HE_LTF_2X: 2X HE LTF is 6.4us LTF |
| 7802 |
* @QCA_WLAN_HE_LTF_4X: 4X HE LTF is 12.8us LTF |
| 7803 |
*/ |
| 7804 |
enum qca_wlan_he_ltf_cfg { |
| 7805 |
QCA_WLAN_HE_LTF_AUTO = 0, |
| 7806 |
QCA_WLAN_HE_LTF_1X = 1, |
| 7807 |
QCA_WLAN_HE_LTF_2X = 2, |
| 7808 |
QCA_WLAN_HE_LTF_4X = 3, |
| 7809 |
}; |
| 7810 |
|
| 7811 |
/** |
| 7812 |
* enum qca_wlan_he_mac_padding_dur - HE trigger frame MAC padding duration |
| 7813 |
* |
| 7814 |
* Indicates the HE trigger frame MAC padding duration value. |
| 7815 |
* |
| 7816 |
* @QCA_WLAN_HE_NO_ADDITIONAL_PROCESS_TIME: no additional time required to |
| 7817 |
* process the trigger frame. |
| 7818 |
* @QCA_WLAN_HE_8US_OF_PROCESS_TIME: indicates the 8us of processing time for |
| 7819 |
* trigger frame. |
| 7820 |
* @QCA_WLAN_HE_16US_OF_PROCESS_TIME: indicates the 16us of processing time for |
| 7821 |
* trigger frame. |
| 7822 |
*/ |
| 7823 |
enum qca_wlan_he_mac_padding_dur { |
| 7824 |
QCA_WLAN_HE_NO_ADDITIONAL_PROCESS_TIME = 0, |
| 7825 |
QCA_WLAN_HE_8US_OF_PROCESS_TIME = 1, |
| 7826 |
QCA_WLAN_HE_16US_OF_PROCESS_TIME = 2, |
| 7827 |
}; |
| 7828 |
|
| 7829 |
/** |
| 7830 |
* enum qca_wlan_he_om_ctrl_ch_bw - HE OM control field BW configuration |
| 7831 |
* |
| 7832 |
* Indicates the HE Operating mode control channel width setting value. |
| 7833 |
* |
| 7834 |
* @QCA_WLAN_HE_OM_CTRL_BW_20M: Primary 20 MHz |
| 7835 |
* @QCA_WLAN_HE_OM_CTRL_BW_40M: Primary 40 MHz |
| 7836 |
* @QCA_WLAN_HE_OM_CTRL_BW_80M: Primary 80 MHz |
| 7837 |
* @QCA_WLAN_HE_OM_CTRL_BW_160M: 160 MHz and 80+80 MHz |
| 7838 |
*/ |
| 7839 |
enum qca_wlan_he_om_ctrl_ch_bw { |
| 7840 |
QCA_WLAN_HE_OM_CTRL_BW_20M = 0, |
| 7841 |
QCA_WLAN_HE_OM_CTRL_BW_40M = 1, |
| 7842 |
QCA_WLAN_HE_OM_CTRL_BW_80M = 2, |
| 7843 |
QCA_WLAN_HE_OM_CTRL_BW_160M = 3, |
| 7844 |
}; |
| 7845 |
|
| 7846 |
/** |
| 7847 |
* enum qca_wlan_keep_alive_data_type - Keep alive data type configuration |
| 7848 |
* |
| 7849 |
* Indicates the frame types to use for keep alive data. |
| 7850 |
* |
| 7851 |
* @QCA_WLAN_KEEP_ALIVE_DEFAULT: Driver default type used for keep alive. |
| 7852 |
* @QCA_WLAN_KEEP_ALIVE_DATA: Data frame type for keep alive. |
| 7853 |
* @QCA_WLAN_KEEP_ALIVE_MGMT: Management frame type for keep alive. |
| 7854 |
*/ |
| 7855 |
enum qca_wlan_keep_alive_data_type { |
| 7856 |
QCA_WLAN_KEEP_ALIVE_DEFAULT = 0, |
| 7857 |
QCA_WLAN_KEEP_ALIVE_DATA = 1, |
| 7858 |
QCA_WLAN_KEEP_ALIVE_MGMT = 2, |
| 7859 |
}; |
| 7860 |
|
| 7861 |
/** |
| 7862 |
* enum qca_wlan_vendor_attr_he_omi_tx: Represents attributes for |
| 7863 |
* HE operating mode control transmit request. These attributes are |
| 7864 |
* sent as part of QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_OMI_TX and |
| 7865 |
* QCA_NL80211_VENDOR_SUBCMD_WIFI_TEST_CONFIGURATION. |
| 7866 |
* |
| 7867 |
* @QCA_WLAN_VENDOR_ATTR_HE_OMI_RX_NSS: Mandatory 8-bit unsigned value |
| 7868 |
* indicates the maximum number of spatial streams, NSS, that the STA |
| 7869 |
* supports in reception for PPDU bandwidths less than or equal to 80 MHz |
| 7870 |
* and is set to NSS - 1. |
| 7871 |
* |
| 7872 |
* @QCA_WLAN_VENDOR_ATTR_HE_OMI_CH_BW: Mandatory 8-bit unsigned value |
| 7873 |
* indicates the operating channel width supported by the STA for both |
| 7874 |
* reception and transmission. Uses enum qca_wlan_he_om_ctrl_ch_bw values. |
| 7875 |
* |
| 7876 |
* @QCA_WLAN_VENDOR_ATTR_HE_OMI_ULMU_DISABLE: Mandatory 8-bit unsigned value |
| 7877 |
* indicates the all trigger based UL MU operations by the STA. |
| 7878 |
* 0 - UL MU operations are enabled by the STA. |
| 7879 |
* 1 - All triggered UL MU transmissions are suspended by the STA. |
| 7880 |
* |
| 7881 |
* @QCA_WLAN_VENDOR_ATTR_HE_OMI_TX_NSTS: Mandatory 8-bit unsigned value |
| 7882 |
* indicates the maximum number of space-time streams, NSTS, that |
| 7883 |
* the STA supports in transmission and is set to NSTS - 1. |
| 7884 |
* |
| 7885 |
* @QCA_WLAN_VENDOR_ATTR_HE_OMI_ULMU_DATA_DISABLE: 8-bit unsigned value |
| 7886 |
* combined with the UL MU Disable subfield and the recipient's setting |
| 7887 |
* of the OM Control UL MU Data Disable RX Support subfield in the HE MAC |
| 7888 |
* capabilities to determine which HE TB PPDUs are possible by the |
| 7889 |
* STA to transmit. |
| 7890 |
* 0 - UL MU data operations are enabled by the STA. |
| 7891 |
* 1 - Determine which HE TB PPDU types are allowed by the STA if UL MU disable |
| 7892 |
* bit is not set, else UL MU Tx is suspended. |
| 7893 |
* |
| 7894 |
*/ |
| 7895 |
enum qca_wlan_vendor_attr_he_omi_tx { |
| 7896 |
QCA_WLAN_VENDOR_ATTR_HE_OMI_INVALID = 0, |
| 7897 |
QCA_WLAN_VENDOR_ATTR_HE_OMI_RX_NSS = 1, |
| 7898 |
QCA_WLAN_VENDOR_ATTR_HE_OMI_CH_BW = 2, |
| 7899 |
QCA_WLAN_VENDOR_ATTR_HE_OMI_ULMU_DISABLE = 3, |
| 7900 |
QCA_WLAN_VENDOR_ATTR_HE_OMI_TX_NSTS = 4, |
| 7901 |
QCA_WLAN_VENDOR_ATTR_HE_OMI_ULMU_DATA_DISABLE = 5, |
| 7902 |
|
| 7903 |
/* keep last */ |
| 7904 |
QCA_WLAN_VENDOR_ATTR_HE_OMI_AFTER_LAST, |
| 7905 |
QCA_WLAN_VENDOR_ATTR_HE_OMI_MAX = |
| 7906 |
QCA_WLAN_VENDOR_ATTR_HE_OMI_AFTER_LAST - 1, |
| 7907 |
}; |
| 7908 |
|
| 7909 |
/** |
| 7910 |
* enum qca_wlan_vendor_phy_mode - Different PHY modes |
| 7911 |
* These values are used with %QCA_WLAN_VENDOR_ATTR_CONFIG_PHY_MODE. |
| 7912 |
* |
| 7913 |
* @QCA_WLAN_VENDOR_PHY_MODE_AUTO: autoselect |
| 7914 |
* @QCA_WLAN_VENDOR_PHY_MODE_2G_AUTO: 2.4 GHz 802.11b/g/n/ax autoselect |
| 7915 |
* @QCA_WLAN_VENDOR_PHY_MODE_5G_AUTO: 5 GHz 802.11a/n/ac/ax autoselect |
| 7916 |
* @QCA_WLAN_VENDOR_PHY_MODE_11A: 5 GHz, OFDM |
| 7917 |
* @QCA_WLAN_VENDOR_PHY_MODE_11B: 2.4 GHz, CCK |
| 7918 |
* @QCA_WLAN_VENDOR_PHY_MODE_11G: 2.4 GHz, OFDM |
| 7919 |
* @QCA_WLAN_VENDOR_PHY_MODE_11AGN: Support 802.11n in both 2.4 GHz and 5 GHz |
| 7920 |
* @QCA_WLAN_VENDOR_PHY_MODE_11NG_HT20: 2.4 GHz, HT20 |
| 7921 |
* @QCA_WLAN_VENDOR_PHY_MODE_11NG_HT40PLUS: 2.4 GHz, HT40 (ext ch +1) |
| 7922 |
* @QCA_WLAN_VENDOR_PHY_MODE_11NG_HT40MINUS: 2.4 GHz, HT40 (ext ch -1) |
| 7923 |
* @QCA_WLAN_VENDOR_PHY_MODE_11NG_HT40: 2.4 GHz, Auto HT40 |
| 7924 |
* @QCA_WLAN_VENDOR_PHY_MODE_11NA_HT20: 5 GHz, HT20 |
| 7925 |
* @QCA_WLAN_VENDOR_PHY_MODE_11NA_HT40PLUS: 5 GHz, HT40 (ext ch +1) |
| 7926 |
* @QCA_WLAN_VENDOR_PHY_MODE_11NA_HT40MINUS: 5 GHz, HT40 (ext ch -1) |
| 7927 |
* @QCA_WLAN_VENDOR_PHY_MODE_11NA_HT40: 5 GHz, Auto HT40 |
| 7928 |
* @QCA_WLAN_VENDOR_PHY_MODE_11AC_VHT20: 5 GHz, VHT20 |
| 7929 |
* @QCA_WLAN_VENDOR_PHY_MODE_11AC_VHT40PLUS: 5 GHz, VHT40 (Ext ch +1) |
| 7930 |
* @QCA_WLAN_VENDOR_PHY_MODE_11AC_VHT40MINUS: 5 GHz VHT40 (Ext ch -1) |
| 7931 |
* @QCA_WLAN_VENDOR_PHY_MODE_11AC_VHT40: 5 GHz, VHT40 |
| 7932 |
* @QCA_WLAN_VENDOR_PHY_MODE_11AC_VHT80: 5 GHz, VHT80 |
| 7933 |
* @QCA_WLAN_VENDOR_PHY_MODE_11AC_VHT80P80: 5 GHz, VHT80+80 |
| 7934 |
* @QCA_WLAN_VENDOR_PHY_MODE_11AC_VHT160: 5 GHz, VHT160 |
| 7935 |
* @QCA_WLAN_VENDOR_PHY_MODE_11AX_HE20: HE20 |
| 7936 |
* @QCA_WLAN_VENDOR_PHY_MODE_11AX_HE40: HE40 |
| 7937 |
* @QCA_WLAN_VENDOR_PHY_MODE_11AX_HE40PLUS: HE40 (ext ch +1) |
| 7938 |
* @QCA_WLAN_VENDOR_PHY_MODE_11AX_HE40MINUS: HE40 (ext ch -1) |
| 7939 |
* @QCA_WLAN_VENDOR_PHY_MODE_11AX_HE80: HE80 |
| 7940 |
* @QCA_WLAN_VENDOR_PHY_MODE_11AX_HE80P80: HE 80P80 |
| 7941 |
* @QCA_WLAN_VENDOR_PHY_MODE_11AX_HE160: HE160 |
| 7942 |
*/ |
| 7943 |
enum qca_wlan_vendor_phy_mode { |
| 7944 |
QCA_WLAN_VENDOR_PHY_MODE_AUTO = 0, |
| 7945 |
QCA_WLAN_VENDOR_PHY_MODE_2G_AUTO = 1, |
| 7946 |
QCA_WLAN_VENDOR_PHY_MODE_5G_AUTO = 2, |
| 7947 |
QCA_WLAN_VENDOR_PHY_MODE_11A = 3, |
| 7948 |
QCA_WLAN_VENDOR_PHY_MODE_11B = 4, |
| 7949 |
QCA_WLAN_VENDOR_PHY_MODE_11G = 5, |
| 7950 |
QCA_WLAN_VENDOR_PHY_MODE_11AGN = 6, |
| 7951 |
QCA_WLAN_VENDOR_PHY_MODE_11NG_HT20 = 7, |
| 7952 |
QCA_WLAN_VENDOR_PHY_MODE_11NG_HT40PLUS = 8, |
| 7953 |
QCA_WLAN_VENDOR_PHY_MODE_11NG_HT40MINUS = 9, |
| 7954 |
QCA_WLAN_VENDOR_PHY_MODE_11NG_HT40 = 10, |
| 7955 |
QCA_WLAN_VENDOR_PHY_MODE_11NA_HT20 = 11, |
| 7956 |
QCA_WLAN_VENDOR_PHY_MODE_11NA_HT40PLUS = 12, |
| 7957 |
QCA_WLAN_VENDOR_PHY_MODE_11NA_HT40MINUS = 13, |
| 7958 |
QCA_WLAN_VENDOR_PHY_MODE_11NA_HT40 = 14, |
| 7959 |
QCA_WLAN_VENDOR_PHY_MODE_11AC_VHT20 = 15, |
| 7960 |
QCA_WLAN_VENDOR_PHY_MODE_11AC_VHT40PLUS = 16, |
| 7961 |
QCA_WLAN_VENDOR_PHY_MODE_11AC_VHT40MINUS = 17, |
| 7962 |
QCA_WLAN_VENDOR_PHY_MODE_11AC_VHT40 = 18, |
| 7963 |
QCA_WLAN_VENDOR_PHY_MODE_11AC_VHT80 = 19, |
| 7964 |
QCA_WLAN_VENDOR_PHY_MODE_11AC_VHT80P80 = 20, |
| 7965 |
QCA_WLAN_VENDOR_PHY_MODE_11AC_VHT160 = 21, |
| 7966 |
QCA_WLAN_VENDOR_PHY_MODE_11AX_HE20 = 22, |
| 7967 |
QCA_WLAN_VENDOR_PHY_MODE_11AX_HE40 = 23, |
| 7968 |
QCA_WLAN_VENDOR_PHY_MODE_11AX_HE40PLUS = 24, |
| 7969 |
QCA_WLAN_VENDOR_PHY_MODE_11AX_HE40MINUS = 25, |
| 7970 |
QCA_WLAN_VENDOR_PHY_MODE_11AX_HE80 = 26, |
| 7971 |
QCA_WLAN_VENDOR_PHY_MODE_11AX_HE80P80 = 27, |
| 7972 |
QCA_WLAN_VENDOR_PHY_MODE_11AX_HE160 = 28, |
| 7973 |
}; |
| 7974 |
|
| 7975 |
/* Attributes for data used by |
| 7976 |
* QCA_NL80211_VENDOR_SUBCMD_WIFI_TEST_CONFIGURATION |
| 7977 |
*/ |
| 7978 |
enum qca_wlan_vendor_attr_wifi_test_config { |
| 7979 |
QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_INVALID = 0, |
| 7980 |
/* 8-bit unsigned value to configure the driver to enable/disable |
| 7981 |
* WMM feature. This attribute is used to configure testbed device. |
| 7982 |
* 1-enable, 0-disable |
| 7983 |
*/ |
| 7984 |
QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_WMM_ENABLE = 1, |
| 7985 |
|
| 7986 |
/* 8-bit unsigned value to configure the driver to accept/reject |
| 7987 |
* the addba request from peer. This attribute is used to configure |
| 7988 |
* the testbed device. |
| 7989 |
* 1-accept addba, 0-reject addba |
| 7990 |
*/ |
| 7991 |
QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_ACCEPT_ADDBA_REQ = 2, |
| 7992 |
|
| 7993 |
/* 8-bit unsigned value to configure the driver to send or not to |
| 7994 |
* send the addba request to peer. |
| 7995 |
* This attribute is used to configure the testbed device. |
| 7996 |
* 1-send addba, 0-do not send addba |
| 7997 |
*/ |
| 7998 |
QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_SEND_ADDBA_REQ = 3, |
| 7999 |
|
| 8000 |
/* 8-bit unsigned value to indicate the HE fragmentation support. |
| 8001 |
* Uses enum he_fragmentation_val values. |
| 8002 |
* This attribute is used to configure the testbed device to |
| 8003 |
* allow the advertised hardware capabilities to be downgraded |
| 8004 |
* for testing purposes. |
| 8005 |
*/ |
| 8006 |
QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_FRAGMENTATION = 4, |
| 8007 |
|
| 8008 |
/* 8-bit unsigned value to indicate the HE MCS support. |
| 8009 |
* Uses enum he_mcs_config values. |
| 8010 |
* This attribute is used to configure the testbed device to |
| 8011 |
* allow the advertised hardware capabilities to be downgraded |
| 8012 |
* for testing purposes. |
| 8013 |
*/ |
| 8014 |
QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_MCS = 5, |
| 8015 |
|
| 8016 |
/* 8-bit unsigned value to configure the driver to allow or not to |
| 8017 |
* allow the connection with WEP/TKIP in HT/VHT/HE modes. |
| 8018 |
* This attribute is used to configure the testbed device. |
| 8019 |
* 1-allow WEP/TKIP in HT/VHT/HE, 0-do not allow WEP/TKIP. |
| 8020 |
*/ |
| 8021 |
QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_WEP_TKIP_IN_HE = 6, |
| 8022 |
|
| 8023 |
/* 8-bit unsigned value to configure the driver to add a |
| 8024 |
* new BA session or delete the existing BA session for |
| 8025 |
* given TID. ADDBA command uses the buffer size and TID |
| 8026 |
* configuration if user specifies the values else default |
| 8027 |
* value for buffer size is used for all TIDs if the TID |
| 8028 |
* also not specified. For DEL_BA command TID value is |
| 8029 |
* required to process the command. |
| 8030 |
* Uses enum qca_wlan_ba_session_config values. |
| 8031 |
* This attribute is used to configure the testbed device. |
| 8032 |
*/ |
| 8033 |
QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_ADD_DEL_BA_SESSION = 7, |
| 8034 |
|
| 8035 |
/* 16-bit unsigned value to configure the buffer size in addba |
| 8036 |
* request and response frames. |
| 8037 |
* This attribute is used to configure the testbed device. |
| 8038 |
* The range of the value is 0 to 256. |
| 8039 |
*/ |
| 8040 |
QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_ADDBA_BUFF_SIZE = 8, |
| 8041 |
|
| 8042 |
/* 8-bit unsigned value to configure the buffer size in addba |
| 8043 |
* request and response frames. |
| 8044 |
* This attribute is used to configure the testbed device. |
| 8045 |
*/ |
| 8046 |
QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_BA_TID = 9, |
| 8047 |
|
| 8048 |
/* 8-bit unsigned value to configure the no ack policy. |
| 8049 |
* To configure no ack policy, access category value is |
| 8050 |
* required to process the command. |
| 8051 |
* This attribute is used to configure the testbed device. |
| 8052 |
* 1 - enable no ack, 0 - disable no ack. |
| 8053 |
*/ |
| 8054 |
QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_ENABLE_NO_ACK = 10, |
| 8055 |
|
| 8056 |
/* 8-bit unsigned value to configure the AC for no ack policy |
| 8057 |
* This attribute is used to configure the testbed device. |
| 8058 |
* Uses the enum qca_wlan_ac_type values. |
| 8059 |
*/ |
| 8060 |
QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_NO_ACK_AC = 11, |
| 8061 |
|
| 8062 |
/* 8-bit unsigned value to configure the HE LTF |
| 8063 |
* This attribute is used to configure the testbed device. |
| 8064 |
* Uses the enum qca_wlan_he_ltf_cfg values. |
| 8065 |
*/ |
| 8066 |
QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_LTF = 12, |
| 8067 |
|
| 8068 |
/* 8-bit unsigned value to configure the tx beamformee. |
| 8069 |
* This attribute is used to configure the testbed device. |
| 8070 |
* 1-enable, 0-disable. |
| 8071 |
*/ |
| 8072 |
QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_ENABLE_TX_BEAMFORMEE = 13, |
| 8073 |
|
| 8074 |
/* 8-bit unsigned value to configure the tx beamformee number |
| 8075 |
* of space-time streams. |
| 8076 |
* This attribute is used to configure the testbed device. |
| 8077 |
* The range of the value is 0 to 8. |
| 8078 |
*/ |
| 8079 |
QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_TX_BEAMFORMEE_NSTS = 14, |
| 8080 |
|
| 8081 |
/* 8-bit unsigned value to configure the MU EDCA params for given AC |
| 8082 |
* This attribute is used to configure the testbed device. |
| 8083 |
* Uses the enum qca_wlan_ac_type values. |
| 8084 |
*/ |
| 8085 |
QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_MU_EDCA_AC = 15, |
| 8086 |
|
| 8087 |
/* 8-bit unsigned value to configure the MU EDCA AIFSN for given AC |
| 8088 |
* To configure MU EDCA AIFSN value, MU EDCA access category value |
| 8089 |
* is required to process the command. |
| 8090 |
* This attribute is used to configure the testbed device. |
| 8091 |
*/ |
| 8092 |
QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_MU_EDCA_AIFSN = 16, |
| 8093 |
|
| 8094 |
/* 8-bit unsigned value to configure the MU EDCA ECW min value for |
| 8095 |
* given AC. |
| 8096 |
* To configure MU EDCA ECW min value, MU EDCA access category value |
| 8097 |
* is required to process the command. |
| 8098 |
* This attribute is used to configure the testbed device. |
| 8099 |
*/ |
| 8100 |
QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_MU_EDCA_ECWMIN = 17, |
| 8101 |
|
| 8102 |
/* 8-bit unsigned value to configure the MU EDCA ECW max value for |
| 8103 |
* given AC. |
| 8104 |
* To configure MU EDCA ECW max value, MU EDCA access category value |
| 8105 |
* is required to process the command. |
| 8106 |
* This attribute is used to configure the testbed device. |
| 8107 |
*/ |
| 8108 |
QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_MU_EDCA_ECWMAX = 18, |
| 8109 |
|
| 8110 |
/* 8-bit unsigned value to configure the MU EDCA timer for given AC |
| 8111 |
* To configure MU EDCA timer value, MU EDCA access category value |
| 8112 |
* is required to process the command. |
| 8113 |
* This attribute is used to configure the testbed device. |
| 8114 |
*/ |
| 8115 |
QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_MU_EDCA_TIMER = 19, |
| 8116 |
|
| 8117 |
/* 8-bit unsigned value to configure the HE trigger frame MAC padding |
| 8118 |
* duration. |
| 8119 |
* This attribute is used to configure the testbed device. |
| 8120 |
* Uses the enum qca_wlan_he_mac_padding_dur values. |
| 8121 |
*/ |
| 8122 |
QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_MAC_PADDING_DUR = 20, |
| 8123 |
|
| 8124 |
/* 8-bit unsigned value to override the MU EDCA params to defaults |
| 8125 |
* regardless of the AP beacon MU EDCA params. If it is enabled use |
| 8126 |
* the default values else use the MU EDCA params from AP beacon. |
| 8127 |
* This attribute is used to configure the testbed device. |
| 8128 |
* 1-enable, 0-disable. |
| 8129 |
*/ |
| 8130 |
QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_OVERRIDE_MU_EDCA = 21, |
| 8131 |
|
| 8132 |
/* 8-bit unsigned value to configure the support for receiving |
| 8133 |
* an MPDU that contains an operating mode control subfield. |
| 8134 |
* This attribute is used to configure the testbed device. |
| 8135 |
* 1-enable, 0-disable. |
| 8136 |
*/ |
| 8137 |
QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_OM_CTRL_SUPP = 22, |
| 8138 |
|
| 8139 |
/* Nested attribute values required to setup the TWT session. |
| 8140 |
* enum qca_wlan_vendor_attr_twt_setup provides the necessary |
| 8141 |
* information to set up the session. It contains broadcast flags, |
| 8142 |
* set_up flags, trigger value, flow type, flow ID, wake interval |
| 8143 |
* exponent, protection, target wake time, wake duration, wake interval |
| 8144 |
* mantissa. These nested attributes are used to setup a host triggered |
| 8145 |
* TWT session. |
| 8146 |
*/ |
| 8147 |
QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_TWT_SETUP = 23, |
| 8148 |
|
| 8149 |
/* This nested attribute is used to terminate the current TWT session. |
| 8150 |
* It does not currently carry any attributes. |
| 8151 |
*/ |
| 8152 |
QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_TWT_TERMINATE = 24, |
| 8153 |
|
| 8154 |
/* This nested attribute is used to suspend the current TWT session. |
| 8155 |
* It does not currently carry any attributes. |
| 8156 |
*/ |
| 8157 |
QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_TWT_SUSPEND = 25, |
| 8158 |
|
| 8159 |
/* Nested attribute values to indicate the request for resume. |
| 8160 |
* This attribute is used to resume the TWT session. |
| 8161 |
* enum qca_wlan_vendor_attr_twt_resume provides the necessary |
| 8162 |
* parameters required to resume the TWT session. |
| 8163 |
*/ |
| 8164 |
QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_TWT_RESUME = 26, |
| 8165 |
|
| 8166 |
/* 8-bit unsigned value to set the HE operating mode control |
| 8167 |
* (OM CTRL) Channel Width subfield. |
| 8168 |
* The Channel Width subfield indicates the operating channel width |
| 8169 |
* supported by the STA for both reception and transmission. |
| 8170 |
* Uses the enum qca_wlan_he_om_ctrl_ch_bw values. |
| 8171 |
* This setting is cleared with the |
| 8172 |
* QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_CLEAR_HE_OM_CTRL_CONFIG |
| 8173 |
* flag attribute to reset defaults. |
| 8174 |
* This attribute is used to configure the testbed device. |
| 8175 |
*/ |
| 8176 |
QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_OM_CTRL_BW = 27, |
| 8177 |
|
| 8178 |
/* 8-bit unsigned value to configure the number of spatial |
| 8179 |
* streams in HE operating mode control field. |
| 8180 |
* This setting is cleared with the |
| 8181 |
* QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_CLEAR_HE_OM_CTRL_CONFIG |
| 8182 |
* flag attribute to reset defaults. |
| 8183 |
* This attribute is used to configure the testbed device. |
| 8184 |
*/ |
| 8185 |
QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_OM_CTRL_NSS = 28, |
| 8186 |
|
| 8187 |
/* Flag attribute to configure the UL MU disable bit in |
| 8188 |
* HE operating mode control field. |
| 8189 |
* This setting is cleared with the |
| 8190 |
* QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_CLEAR_HE_OM_CTRL_CONFIG |
| 8191 |
* flag attribute to reset defaults. |
| 8192 |
* This attribute is used to configure the testbed device. |
| 8193 |
*/ |
| 8194 |
QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_OM_CTRL_UL_MU_DISABLE = 29, |
| 8195 |
|
| 8196 |
/* Flag attribute to clear the previously set HE operating mode |
| 8197 |
* control field configuration. |
| 8198 |
* This attribute is used to configure the testbed device to reset |
| 8199 |
* defaults to clear any previously set HE operating mode control |
| 8200 |
* field configuration. |
| 8201 |
*/ |
| 8202 |
QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_CLEAR_HE_OM_CTRL_CONFIG = 30, |
| 8203 |
|
| 8204 |
/* 8-bit unsigned value to configure HE single user PPDU |
| 8205 |
* transmission. By default this setting is disabled and it |
| 8206 |
* is disabled in the reset defaults of the device configuration. |
| 8207 |
* This attribute is used to configure the testbed device. |
| 8208 |
* 1-enable, 0-disable |
| 8209 |
*/ |
| 8210 |
QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_TX_SUPPDU = 31, |
| 8211 |
|
| 8212 |
/* 8-bit unsigned value to configure action frame transmission |
| 8213 |
* in HE trigger based PPDU transmission. |
| 8214 |
* By default this setting is disabled and it is disabled in |
| 8215 |
* the reset defaults of the device configuration. |
| 8216 |
* This attribute is used to configure the testbed device. |
| 8217 |
* 1-enable, 0-disable |
| 8218 |
*/ |
| 8219 |
QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_ACTION_TX_TB_PPDU = 32, |
| 8220 |
|
| 8221 |
/* Nested attribute to indicate HE operating mode control field |
| 8222 |
* transmission. It contains operating mode control field Nss, |
| 8223 |
* channel bandwidth, Tx Nsts and UL MU disable attributes. |
| 8224 |
* These nested attributes are used to send HE operating mode control |
| 8225 |
* with configured values. |
| 8226 |
* Uses the enum qca_wlan_vendor_attr_he_omi_tx attributes. |
| 8227 |
* This attribute is used to configure the testbed device. |
| 8228 |
*/ |
| 8229 |
QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_OMI_TX = 33, |
| 8230 |
|
| 8231 |
/* 8-bit unsigned value to configure +HTC_HE support to indicate the |
| 8232 |
* support for the reception of a frame that carries an HE variant |
| 8233 |
* HT Control field. |
| 8234 |
* This attribute is used to configure the testbed device. |
| 8235 |
* 1-enable, 0-disable |
| 8236 |
*/ |
| 8237 |
QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_HTC_HE_SUPP = 34, |
| 8238 |
|
| 8239 |
/* 8-bit unsigned value to configure VHT support in 2.4G band. |
| 8240 |
* This attribute is used to configure the testbed device. |
| 8241 |
* 1-enable, 0-disable |
| 8242 |
*/ |
| 8243 |
QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_ENABLE_2G_VHT = 35, |
| 8244 |
|
| 8245 |
/* 8-bit unsigned value to configure HE testbed defaults. |
| 8246 |
* This attribute is used to configure the testbed device. |
| 8247 |
* 1-set the device HE capabilities to testbed defaults. |
| 8248 |
* 0-reset the device HE capabilities to supported config. |
| 8249 |
*/ |
| 8250 |
QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_SET_HE_TESTBED_DEFAULTS = 36, |
| 8251 |
|
| 8252 |
/* 8-bit unsigned value to configure TWT request support. |
| 8253 |
* This attribute is used to configure the testbed device. |
| 8254 |
* 1-enable, 0-disable. |
| 8255 |
*/ |
| 8256 |
QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_TWT_REQ_SUPPORT = 37, |
| 8257 |
|
| 8258 |
/* 8-bit unsigned value to configure protection for Management |
| 8259 |
* frames when PMF is enabled for the association. |
| 8260 |
* This attribute is used to configure the testbed device. |
| 8261 |
* 0-use the correct key, 1-use an incorrect key, 2-disable protection. |
| 8262 |
*/ |
| 8263 |
QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_PMF_PROTECTION = 38, |
| 8264 |
|
| 8265 |
/* Flag attribute to inject Disassociation frame to the connected AP. |
| 8266 |
* This attribute is used to configure the testbed device. |
| 8267 |
*/ |
| 8268 |
QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_DISASSOC_TX = 39, |
| 8269 |
|
| 8270 |
/* 8-bit unsigned value to configure an override for the RSNXE Used |
| 8271 |
* subfield in the MIC control field of the FTE in FT Reassociation |
| 8272 |
* Request frame. |
| 8273 |
* 0 - Default behavior, 1 - override with 1, 2 - override with 0. |
| 8274 |
* This attribute is used to configure the testbed device. |
| 8275 |
* This attribute can be configured only when STA is in associated state |
| 8276 |
* and the configuration is valid until the disconnection. |
| 8277 |
*/ |
| 8278 |
QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_FT_REASSOCREQ_RSNXE_USED = 40, |
| 8279 |
|
| 8280 |
/* 8-bit unsigned value to configure the driver to ignore CSA (Channel |
| 8281 |
* Switch Announcement) when STA is in connected state. |
| 8282 |
* 0 - Default behavior, 1 - Ignore CSA. |
| 8283 |
* This attribute is used to configure the testbed device. |
| 8284 |
* This attribute can be configured only when STA is in associated state |
| 8285 |
* and the configuration is valid until the disconnection. |
| 8286 |
*/ |
| 8287 |
QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_IGNORE_CSA = 41, |
| 8288 |
|
| 8289 |
/* Nested attribute values required to configure OCI (Operating Channel |
| 8290 |
* Information). Attributes defined in enum |
| 8291 |
* qca_wlan_vendor_attr_oci_override are nested within this attribute. |
| 8292 |
* This attribute is used to configure the testbed device. |
| 8293 |
* This attribute can be configured only when STA is in associated state |
| 8294 |
* and the configuration is valid until the disconnection. |
| 8295 |
*/ |
| 8296 |
QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_OCI_OVERRIDE = 42, |
| 8297 |
|
| 8298 |
/* 8-bit unsigned value to configure the driver/firmware to ignore SA |
| 8299 |
* Query timeout. If this configuration is enabled STA shall not send |
| 8300 |
* Deauthentication frmae when SA Query times out (mainly, after a |
| 8301 |
* channel switch when OCV is enabled). |
| 8302 |
* 0 - Default behavior, 1 - Ignore SA Query timeout. |
| 8303 |
* This attribute is used to configure the testbed device. |
| 8304 |
* This attribute can be configured only when STA is in associated state |
| 8305 |
* and the configuration is valid until the disconnection. |
| 8306 |
*/ |
| 8307 |
QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_IGNORE_SA_QUERY_TIMEOUT = 43, |
| 8308 |
|
| 8309 |
/* 8-bit unsigned value to configure the driver/firmware to start or |
| 8310 |
* stop transmitting FILS discovery frames. |
| 8311 |
* 0 - Stop transmitting FILS discovery frames |
| 8312 |
* 1 - Start transmitting FILS discovery frames |
| 8313 |
* This attribute is used to configure the testbed device. |
| 8314 |
* This attribute can be configured only in AP mode and the |
| 8315 |
* configuration is valid until AP restart. |
| 8316 |
*/ |
| 8317 |
QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_FILS_DISCOVERY_FRAMES_TX = 44, |
| 8318 |
|
| 8319 |
/* 8-bit unsigned value to configure the driver/firmware to enable or |
| 8320 |
* disable full bandwidth UL MU-MIMO subfield in the HE PHY capabilities |
| 8321 |
* information field. |
| 8322 |
* 0 - Disable full bandwidth UL MU-MIMO subfield |
| 8323 |
* 1 - Enable full bandwidth UL MU-MIMO subfield |
| 8324 |
* This attribute is used to configure the testbed device. |
| 8325 |
*/ |
| 8326 |
QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_FULL_BW_UL_MU_MIMO = 45, |
| 8327 |
|
| 8328 |
/* 16-bit unsigned value to configure the driver with a specific BSS |
| 8329 |
* max idle period to advertise in the BSS Max Idle Period element |
| 8330 |
* (IEEE Std 802.11-2016, 9.4.2.79) in (Re)Association Request frames. |
| 8331 |
* This attribute is used to configure the testbed device. |
| 8332 |
*/ |
| 8333 |
QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_BSS_MAX_IDLE_PERIOD = 46, |
| 8334 |
|
| 8335 |
/* 8-bit unsigned value to configure the driver to use only RU 242 tone |
| 8336 |
* for data transmission. |
| 8337 |
* 0 - Default behavior, 1 - Configure RU 242 tone for data Tx. |
| 8338 |
* This attribute is used to configure the testbed device. |
| 8339 |
*/ |
| 8340 |
QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_RU_242_TONE_TX = 47, |
| 8341 |
|
| 8342 |
/* 8-bit unsigned value to configure the driver to disable data and |
| 8343 |
* management response frame transmission to test the BSS max idle |
| 8344 |
* feature. |
| 8345 |
* 0 - Default behavior, 1 - Disable data and management response Tx. |
| 8346 |
* This attribute is used to configure the testbed device. |
| 8347 |
*/ |
| 8348 |
QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_DISABLE_DATA_MGMT_RSP_TX = 48, |
| 8349 |
|
| 8350 |
/* 8-bit unsigned value to configure the driver/firmware to enable or |
| 8351 |
* disable Punctured Preamble Rx subfield in the HE PHY capabilities |
| 8352 |
* information field. |
| 8353 |
* 0 - Disable Punctured Preamble Rx subfield |
| 8354 |
* 1 - Enable Punctured Preamble Rx subfield |
| 8355 |
* This attribute is used to configure the testbed device. |
| 8356 |
*/ |
| 8357 |
QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_PUNCTURED_PREAMBLE_RX = 49, |
| 8358 |
|
| 8359 |
/* 8-bit unsigned value to configure the driver to ignore the SAE H2E |
| 8360 |
* requirement mismatch for 6 GHz connection. |
| 8361 |
* 0 - Default behavior, 1 - Ignore SAE H2E requirement mismatch. |
| 8362 |
* This attribute is used to configure the testbed device. |
| 8363 |
*/ |
| 8364 |
QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_IGNORE_H2E_RSNXE = 50, |
| 8365 |
|
| 8366 |
/* 8-bit unsigned value to configure the driver to allow 6 GHz |
| 8367 |
* connection with all security modes. |
| 8368 |
* 0 - Default behavior, 1 - Allow 6 GHz connection with all security |
| 8369 |
* modes. |
| 8370 |
* This attribute is used for testing purposes. |
| 8371 |
*/ |
| 8372 |
QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_6GHZ_SECURITY_TEST_MODE = 51, |
| 8373 |
|
| 8374 |
/* 8-bit unsigned value to configure the driver to transmit data with |
| 8375 |
* ER SU PPDU type. |
| 8376 |
* |
| 8377 |
* 0 - Default behavior, 1 - Enable ER SU PPDU type TX. |
| 8378 |
* This attribute is used for testing purposes. |
| 8379 |
*/ |
| 8380 |
QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_ER_SU_PPDU_TYPE = 52, |
| 8381 |
|
| 8382 |
/* 8-bit unsigned value to configure the driver to use Data or |
| 8383 |
* Management frame type for keep alive data. |
| 8384 |
* Uses enum qca_wlan_keep_alive_data_type values. |
| 8385 |
* |
| 8386 |
* This attribute is used for testing purposes. |
| 8387 |
*/ |
| 8388 |
QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_KEEP_ALIVE_FRAME_TYPE = 53, |
| 8389 |
|
| 8390 |
/* 8-bit unsigned value to configure the driver to use scan request |
| 8391 |
* BSSID value in Probe Request frame RA(A1) during the scan. The |
| 8392 |
* driver saves this configuration and applies this setting to all user |
| 8393 |
* space scan requests until the setting is cleared. If this |
| 8394 |
* configuration is set, the driver uses the BSSID value from the scan |
| 8395 |
* request to set the RA(A1) in the Probe Request frames during the |
| 8396 |
* scan. |
| 8397 |
* |
| 8398 |
* 0 - Default behavior uses the broadcast RA in Probe Request frames. |
| 8399 |
* 1 - Uses the scan request BSSID in RA in Probe Request frames. |
| 8400 |
* This attribute is used for testing purposes. |
| 8401 |
*/ |
| 8402 |
QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_USE_BSSID_IN_PROBE_REQ_RA = 54, |
| 8403 |
|
| 8404 |
/* 8-bit unsigned value to configure the driver to enable/disable the |
| 8405 |
* BSS max idle period support. |
| 8406 |
* |
| 8407 |
* 0 - Disable the BSS max idle support. |
| 8408 |
* 1 - Enable the BSS max idle support. |
| 8409 |
* This attribute is used for testing purposes. |
| 8410 |
*/ |
| 8411 |
QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_BSS_MAX_IDLE_PERIOD_ENABLE = 55, |
| 8412 |
|
| 8413 |
/* 8-bit unsigned value to configure the driver/firmware to enable or |
| 8414 |
* disable Rx control frame to MultiBSS subfield in the HE MAC |
| 8415 |
* capabilities information field. |
| 8416 |
* 0 - Disable Rx control frame to MultiBSS subfield |
| 8417 |
* 1 - Enable Rx control frame to MultiBSS subfield |
| 8418 |
* This attribute is used to configure the testbed device. |
| 8419 |
*/ |
| 8420 |
QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_RX_CTRL_FRAME_TO_MBSS = 56, |
| 8421 |
|
| 8422 |
/* 8-bit unsigned value to configure the driver/firmware to enable or |
| 8423 |
* disable Broadcast TWT support subfield in the HE MAC capabilities |
| 8424 |
* information field. |
| 8425 |
* 0 - Disable Broadcast TWT support subfield |
| 8426 |
* 1 - Enable Broadcast TWT support subfield |
| 8427 |
* This attribute is used to configure the testbed device. |
| 8428 |
*/ |
| 8429 |
QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_BCAST_TWT_SUPPORT = 57, |
| 8430 |
|
| 8431 |
/* keep last */ |
| 8432 |
QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_AFTER_LAST, |
| 8433 |
QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_MAX = |
| 8434 |
QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_AFTER_LAST - 1, |
| 8435 |
}; |
| 8436 |
|
| 8437 |
/** |
| 8438 |
* enum qca_wlan_twt_operation - Operation of the config TWT request |
| 8439 |
* Values for %QCA_WLAN_VENDOR_ATTR_CONFIG_TWT_OPERATION. |
| 8440 |
* The response for the respective operations can be either synchronous or |
| 8441 |
* asynchronous (wherever specified). If synchronous, the response to this |
| 8442 |
* operation is obtained in the corresponding vendor command reply to the user |
| 8443 |
* space. For the asynchronous case the response is obtained as an event with |
| 8444 |
* the same operation type. |
| 8445 |
* |
| 8446 |
* Drivers shall support either of these modes but not both simultaneously. |
| 8447 |
* This support for asynchronous mode is advertised through the flag |
| 8448 |
* QCA_WLAN_VENDOR_FEATURE_TWT_ASYNC_SUPPORT. If this flag is not advertised, |
| 8449 |
* the driver shall support synchronous mode. |
| 8450 |
* |
| 8451 |
* @QCA_WLAN_TWT_SET: Setup a TWT session. Required parameters are configured |
| 8452 |
* through QCA_WLAN_VENDOR_ATTR_CONFIG_TWT_PARAMS. Refers the enum |
| 8453 |
* qca_wlan_vendor_attr_twt_setup. Depending upon the |
| 8454 |
* @QCA_WLAN_VENDOR_FEATURE_TWT_ASYNC_SUPPORT capability, this is either a |
| 8455 |
* synchronous or asynchronous operation. |
| 8456 |
* |
| 8457 |
* @QCA_WLAN_TWT_GET: Get the configured TWT parameters. Required parameters are |
| 8458 |
* obtained through QCA_WLAN_VENDOR_ATTR_CONFIG_TWT_PARAMS. Refers the enum |
| 8459 |
* qca_wlan_vendor_attr_twt_setup. This is a synchronous operation. |
| 8460 |
* |
| 8461 |
* @QCA_WLAN_TWT_TERMINATE: Terminate the TWT session. Required parameters are |
| 8462 |
* obtained through QCA_WLAN_VENDOR_ATTR_CONFIG_TWT_PARAMS. Refers the enum |
| 8463 |
* qca_wlan_vendor_attr_twt_setup. Valid only after the TWT session is setup. |
| 8464 |
* This terminate can either get triggered by the user space or can as well be |
| 8465 |
* a notification from the firmware if it initiates a terminate. |
| 8466 |
* Depending upon the @QCA_WLAN_VENDOR_FEATURE_TWT_ASYNC_SUPPORT capability, |
| 8467 |
* the request from user space can either be a synchronous or asynchronous |
| 8468 |
* operation. |
| 8469 |
* |
| 8470 |
* @QCA_WLAN_TWT_SUSPEND: Suspend the TWT session. Required parameters are |
| 8471 |
* obtained through QCA_WLAN_VENDOR_ATTR_CONFIG_TWT_PARAMS. Refers the enum |
| 8472 |
* qca_wlan_vendor_attr_twt_setup. Valid only after the TWT session is setup. |
| 8473 |
* Depending upon the @QCA_WLAN_VENDOR_FEATURE_TWT_ASYNC_SUPPORT capability, |
| 8474 |
* this is either a synchronous or asynchronous operation. |
| 8475 |
* |
| 8476 |
* @QCA_WLAN_TWT_RESUME: Resume the TWT session. Required parameters are |
| 8477 |
* configured through QCA_WLAN_VENDOR_ATTR_CONFIG_TWT_PARAMS. Refers the enum |
| 8478 |
* qca_wlan_vendor_attr_twt_resume. Valid only after the TWT session is setup. |
| 8479 |
* This can as well be a notification from the firmware on a QCA_WLAN_TWT_NUDGE |
| 8480 |
* request. Depending upon the @QCA_WLAN_VENDOR_FEATURE_TWT_ASYNC_SUPPORT |
| 8481 |
* capability, this is either a synchronous or asynchronous operation. |
| 8482 |
* |
| 8483 |
* @QCA_WLAN_TWT_NUDGE: Suspend and resume the TWT session. TWT nudge is a |
| 8484 |
* combination of suspend and resume in a single request. Required parameters |
| 8485 |
* are configured through QCA_WLAN_VENDOR_ATTR_CONFIG_TWT_PARAMS. Refers the |
| 8486 |
* enum qca_wlan_vendor_attr_twt_nudge. Valid only after the TWT session is |
| 8487 |
* setup. Depending upon the @QCA_WLAN_VENDOR_FEATURE_TWT_ASYNC_SUPPORT |
| 8488 |
* capability, this is either a synchronous or asynchronous operation. |
| 8489 |
* |
| 8490 |
* @QCA_WLAN_TWT_GET_STATS: Get the TWT session traffic statistics information. |
| 8491 |
* Refers the enum qca_wlan_vendor_attr_twt_stats. Valid only after the TWT |
| 8492 |
* session is setup. It's a synchronous operation. |
| 8493 |
* |
| 8494 |
* @QCA_WLAN_TWT_CLEAR_STATS: Clear TWT session traffic statistics information. |
| 8495 |
* Valid only after the TWT session is setup. It's a synchronous operation. |
| 8496 |
* |
| 8497 |
* @QCA_WLAN_TWT_GET_CAPABILITIES: Get TWT capabilities of this device and its |
| 8498 |
* peer. Refers the enum qca_wlan_vendor_attr_twt_capability. It's a synchronous |
| 8499 |
* operation. |
| 8500 |
* |
| 8501 |
* @QCA_WLAN_TWT_SETUP_READY_NOTIFY: Notify userspace that the firmare is |
| 8502 |
* ready for a new TWT session setup after it issued a TWT teardown. |
| 8503 |
* |
| 8504 |
* @QCA_WLAN_TWT_SET_PARAM: Configure TWT related parameters. Required |
| 8505 |
* parameters are obtained through QCA_WLAN_VENDOR_ATTR_CONFIG_TWT_PARAMS. Refer |
| 8506 |
* the enum qca_wlan_vendor_attr_twt_set_param. |
| 8507 |
*/ |
| 8508 |
enum qca_wlan_twt_operation { |
| 8509 |
QCA_WLAN_TWT_SET = 0, |
| 8510 |
QCA_WLAN_TWT_GET = 1, |
| 8511 |
QCA_WLAN_TWT_TERMINATE = 2, |
| 8512 |
QCA_WLAN_TWT_SUSPEND = 3, |
| 8513 |
QCA_WLAN_TWT_RESUME = 4, |
| 8514 |
QCA_WLAN_TWT_NUDGE = 5, |
| 8515 |
QCA_WLAN_TWT_GET_STATS = 6, |
| 8516 |
QCA_WLAN_TWT_CLEAR_STATS = 7, |
| 8517 |
QCA_WLAN_TWT_GET_CAPABILITIES = 8, |
| 8518 |
QCA_WLAN_TWT_SETUP_READY_NOTIFY = 9, |
| 8519 |
QCA_WLAN_TWT_SET_PARAM = 10, |
| 8520 |
}; |
| 8521 |
|
| 8522 |
/** |
| 8523 |
* enum qca_wlan_vendor_attr_config_twt: Defines attributes used by |
| 8524 |
* %QCA_NL80211_VENDOR_SUBCMD_CONFIG_TWT. |
| 8525 |
* |
| 8526 |
* @QCA_WLAN_VENDOR_ATTR_CONFIG_TWT_OPERATION: u8 attribute. Specify the TWT |
| 8527 |
* operation of this request. Possible values are defined in enum |
| 8528 |
* qca_wlan_twt_operation. The parameters for the respective operation is |
| 8529 |
* specified through QCA_WLAN_VENDOR_ATTR_CONFIG_TWT_PARAMS. |
| 8530 |
* |
| 8531 |
* @QCA_WLAN_VENDOR_ATTR_CONFIG_TWT_PARAMS: Nested attribute representing the |
| 8532 |
* parameters configured for TWT. These parameters are represented by |
| 8533 |
* enum qca_wlan_vendor_attr_twt_setup, enum qca_wlan_vendor_attr_twt_resume, |
| 8534 |
* enum qca_wlan_vendor_attr_twt_set_param, or |
| 8535 |
* enum qca_wlan_vendor_attr_twt_stats based on the operation. |
| 8536 |
*/ |
| 8537 |
enum qca_wlan_vendor_attr_config_twt { |
| 8538 |
QCA_WLAN_VENDOR_ATTR_CONFIG_TWT_INVALID = 0, |
| 8539 |
QCA_WLAN_VENDOR_ATTR_CONFIG_TWT_OPERATION = 1, |
| 8540 |
QCA_WLAN_VENDOR_ATTR_CONFIG_TWT_PARAMS = 2, |
| 8541 |
|
| 8542 |
/* keep last */ |
| 8543 |
QCA_WLAN_VENDOR_ATTR_CONFIG_TWT_AFTER_LAST, |
| 8544 |
QCA_WLAN_VENDOR_ATTR_CONFIG_TWT_MAX = |
| 8545 |
QCA_WLAN_VENDOR_ATTR_CONFIG_TWT_AFTER_LAST - 1, |
| 8546 |
}; |
| 8547 |
|
| 8548 |
/** |
| 8549 |
* enum qca_wlan_vendor_attr_bss_filter - Used by the vendor command |
| 8550 |
* QCA_NL80211_VENDOR_SUBCMD_BSS_FILTER. |
| 8551 |
* The user can add/delete the filter by specifying the BSSID/STA MAC address in |
| 8552 |
* QCA_WLAN_VENDOR_ATTR_BSS_FILTER_MAC_ADDR, filter type in |
| 8553 |
* QCA_WLAN_VENDOR_ATTR_BSS_FILTER_TYPE, add/delete action in |
| 8554 |
* QCA_WLAN_VENDOR_ATTR_BSS_FILTER_ACTION in the request. The user can get the |
| 8555 |
* statistics of an unassociated station by specifying the MAC address in |
| 8556 |
* QCA_WLAN_VENDOR_ATTR_BSS_FILTER_MAC_ADDR, station type in |
| 8557 |
* QCA_WLAN_VENDOR_ATTR_BSS_FILTER_TYPE, GET action in |
| 8558 |
* QCA_WLAN_VENDOR_ATTR_BSS_FILTER_ACTION in the request. The user also can get |
| 8559 |
* the statistics of all unassociated stations by specifying the Broadcast MAC |
| 8560 |
* address (ff:ff:ff:ff:ff:ff) in QCA_WLAN_VENDOR_ATTR_BSS_FILTER_MAC_ADDR with |
| 8561 |
* above procedure. In the response, driver shall specify statistics |
| 8562 |
* information nested in QCA_WLAN_VENDOR_ATTR_BSS_FILTER_STA_STATS. |
| 8563 |
*/ |
| 8564 |
enum qca_wlan_vendor_attr_bss_filter { |
| 8565 |
QCA_WLAN_VENDOR_ATTR_BSS_FILTER_INVALID = 0, |
| 8566 |
QCA_WLAN_VENDOR_ATTR_BSS_FILTER_MAC_ADDR = 1, |
| 8567 |
/* Other BSS filter type, unsigned 8 bit value. One of the values |
| 8568 |
* in enum qca_wlan_vendor_bss_filter_type. |
| 8569 |
*/ |
| 8570 |
QCA_WLAN_VENDOR_ATTR_BSS_FILTER_TYPE = 2, |
| 8571 |
/* Other BSS filter action, unsigned 8 bit value. One of the values |
| 8572 |
* in enum qca_wlan_vendor_bss_filter_action. |
| 8573 |
*/ |
| 8574 |
QCA_WLAN_VENDOR_ATTR_BSS_FILTER_ACTION = 3, |
| 8575 |
/* Array of nested attributes where each entry is the statistics |
| 8576 |
* information of the specified station that belong to another BSS. |
| 8577 |
* Attributes for each entry are taken from enum |
| 8578 |
* qca_wlan_vendor_bss_filter_sta_stats. |
| 8579 |
* Other BSS station configured in |
| 8580 |
* QCA_NL80211_VENDOR_SUBCMD_BSS_FILTER with filter type |
| 8581 |
* QCA_WLAN_VENDOR_BSS_FILTER_TYPE_STA. |
| 8582 |
* Statistics returned by QCA_NL80211_VENDOR_SUBCMD_BSS_FILTER |
| 8583 |
* with filter action QCA_WLAN_VENDOR_BSS_FILTER_ACTION_GET. |
| 8584 |
*/ |
| 8585 |
QCA_WLAN_VENDOR_ATTR_BSS_FILTER_STA_STATS = 4, |
| 8586 |
|
| 8587 |
/* keep last */ |
| 8588 |
QCA_WLAN_VENDOR_ATTR_BSS_FILTER_AFTER_LAST, |
| 8589 |
QCA_WLAN_VENDOR_ATTR_BSS_FILTER_MAX = |
| 8590 |
QCA_WLAN_VENDOR_ATTR_BSS_FILTER_AFTER_LAST - 1, |
| 8591 |
}; |
| 8592 |
|
| 8593 |
/** |
| 8594 |
* enum qca_wlan_vendor_bss_filter_type - Type of |
| 8595 |
* filter used in other BSS filter operations. Used by the vendor command |
| 8596 |
* QCA_NL80211_VENDOR_SUBCMD_BSS_FILTER. |
| 8597 |
* |
| 8598 |
* @QCA_WLAN_VENDOR_BSS_FILTER_TYPE_BSSID: BSSID filter |
| 8599 |
* @QCA_WLAN_VENDOR_BSS_FILTER_TYPE_STA: Station MAC address filter |
| 8600 |
*/ |
| 8601 |
enum qca_wlan_vendor_bss_filter_type { |
| 8602 |
QCA_WLAN_VENDOR_BSS_FILTER_TYPE_BSSID, |
| 8603 |
QCA_WLAN_VENDOR_BSS_FILTER_TYPE_STA, |
| 8604 |
}; |
| 8605 |
|
| 8606 |
/** |
| 8607 |
* enum qca_wlan_vendor_bss_filter_action - Type of |
| 8608 |
* action in other BSS filter operations. Used by the vendor command |
| 8609 |
* QCA_NL80211_VENDOR_SUBCMD_BSS_FILTER. |
| 8610 |
* |
| 8611 |
* @QCA_WLAN_VENDOR_BSS_FILTER_ACTION_ADD: Add filter |
| 8612 |
* @QCA_WLAN_VENDOR_BSS_FILTER_ACTION_DEL: Delete filter |
| 8613 |
* @QCA_WLAN_VENDOR_BSS_FILTER_ACTION_GET: Get the statistics |
| 8614 |
*/ |
| 8615 |
enum qca_wlan_vendor_bss_filter_action { |
| 8616 |
QCA_WLAN_VENDOR_BSS_FILTER_ACTION_ADD, |
| 8617 |
QCA_WLAN_VENDOR_BSS_FILTER_ACTION_DEL, |
| 8618 |
QCA_WLAN_VENDOR_BSS_FILTER_ACTION_GET, |
| 8619 |
}; |
| 8620 |
|
| 8621 |
/** |
| 8622 |
* enum qca_wlan_vendor_bss_filter_sta_stats - Attributes for |
| 8623 |
* the statistics of a specific unassociated station belonging to another BSS. |
| 8624 |
* The statistics provides information of the unassociated station |
| 8625 |
* filtered by other BSS operation - such as MAC, signal value. |
| 8626 |
* Used by the vendor command QCA_NL80211_VENDOR_SUBCMD_BSS_FILTER. |
| 8627 |
* |
| 8628 |
* @QCA_WLAN_VENDOR_BSS_FILTER_STA_STATS_MAC: MAC address of the station. |
| 8629 |
* @QCA_WLAN_VENDOR_BSS_FILTER_STA_STATS_RSSI: Last received signal strength |
| 8630 |
* of the station. Unsigned 8 bit number containing RSSI. |
| 8631 |
* @QCA_WLAN_VENDOR_BSS_FILTER_STA_STATS_RSSI_TS: Time stamp of the host |
| 8632 |
* driver for the last received RSSI. Unsigned 64 bit number containing |
| 8633 |
* nanoseconds from the boottime. |
| 8634 |
*/ |
| 8635 |
enum qca_wlan_vendor_bss_filter_sta_stats { |
| 8636 |
QCA_WLAN_VENDOR_BSS_FILTER_STA_STATS_INVALID = 0, |
| 8637 |
QCA_WLAN_VENDOR_BSS_FILTER_STA_STATS_MAC = 1, |
| 8638 |
QCA_WLAN_VENDOR_BSS_FILTER_STA_STATS_RSSI = 2, |
| 8639 |
QCA_WLAN_VENDOR_BSS_FILTER_STA_STATS_RSSI_TS = 3, |
| 8640 |
|
| 8641 |
/* keep last */ |
| 8642 |
QCA_WLAN_VENDOR_BSS_FILTER_STA_STATS_AFTER_LAST, |
| 8643 |
QCA_WLAN_VENDOR_BSS_FILTER_STA_STATS_MAX = |
| 8644 |
QCA_WLAN_VENDOR_BSS_FILTER_STA_STATS_AFTER_LAST - 1 |
| 8645 |
}; |
| 8646 |
|
| 8647 |
/* enum qca_wlan_nan_subcmd_type - Type of NAN command used by attribute |
| 8648 |
* QCA_WLAN_VENDOR_ATTR_NAN_SUBCMD_TYPE as a part of vendor command |
| 8649 |
* QCA_NL80211_VENDOR_SUBCMD_NAN_EXT. |
| 8650 |
*/ |
| 8651 |
enum qca_wlan_nan_ext_subcmd_type { |
| 8652 |
/* Subcmd of type NAN Enable Request */ |
| 8653 |
QCA_WLAN_NAN_EXT_SUBCMD_TYPE_ENABLE_REQ = 1, |
| 8654 |
/* Subcmd of type NAN Disable Request */ |
| 8655 |
QCA_WLAN_NAN_EXT_SUBCMD_TYPE_DISABLE_REQ = 2, |
| 8656 |
}; |
| 8657 |
|
| 8658 |
/** |
| 8659 |
* enum qca_wlan_vendor_attr_nan_params - Used by the vendor command |
| 8660 |
* QCA_NL80211_VENDOR_SUBCMD_NAN_EXT. |
| 8661 |
*/ |
| 8662 |
enum qca_wlan_vendor_attr_nan_params { |
| 8663 |
QCA_WLAN_VENDOR_ATTR_NAN_INVALID = 0, |
| 8664 |
/* Carries NAN command for firmware component. Every vendor command |
| 8665 |
* QCA_NL80211_VENDOR_SUBCMD_NAN_EXT must contain this attribute with a |
| 8666 |
* payload containing the NAN command. NLA_BINARY attribute. |
| 8667 |
*/ |
| 8668 |
QCA_WLAN_VENDOR_ATTR_NAN_CMD_DATA = 1, |
| 8669 |
/* Indicates the type of NAN command sent with |
| 8670 |
* QCA_NL80211_VENDOR_SUBCMD_NAN_EXT. enum qca_wlan_nan_ext_subcmd_type |
| 8671 |
* describes the possible range of values. This attribute is mandatory |
| 8672 |
* if the command being issued is either |
| 8673 |
* QCA_WLAN_NAN_EXT_SUBCMD_TYPE_ENABLE_REQ or |
| 8674 |
* QCA_WLAN_NAN_EXT_SUBCMD_TYPE_DISABLE_REQ. NLA_U32 attribute. |
| 8675 |
*/ |
| 8676 |
QCA_WLAN_VENDOR_ATTR_NAN_SUBCMD_TYPE = 2, |
| 8677 |
/* Frequency (in MHz) of primary NAN discovery social channel in 2.4 GHz |
| 8678 |
* band. This attribute is mandatory when command type is |
| 8679 |
* QCA_WLAN_NAN_EXT_SUBCMD_TYPE_ENABLE_REQ. NLA_U32 attribute. |
| 8680 |
*/ |
| 8681 |
QCA_WLAN_VENDOR_ATTR_NAN_DISC_24GHZ_BAND_FREQ = 3, |
| 8682 |
/* Frequency (in MHz) of secondary NAN discovery social channel in 5 GHz |
| 8683 |
* band. This attribute is optional and should be included when command |
| 8684 |
* type is QCA_WLAN_NAN_EXT_SUBCMD_TYPE_ENABLE_REQ and NAN discovery |
| 8685 |
* has to be started on 5GHz along with 2.4GHz. NLA_U32 attribute. |
| 8686 |
*/ |
| 8687 |
QCA_WLAN_VENDOR_ATTR_NAN_DISC_5GHZ_BAND_FREQ = 4, |
| 8688 |
|
| 8689 |
/* keep last */ |
| 8690 |
QCA_WLAN_VENDOR_ATTR_NAN_PARAMS_AFTER_LAST, |
| 8691 |
QCA_WLAN_VENDOR_ATTR_NAN_PARAMS_MAX = |
| 8692 |
QCA_WLAN_VENDOR_ATTR_NAN_PARAMS_AFTER_LAST - 1 |
| 8693 |
}; |
| 8694 |
|
| 8695 |
/** |
| 8696 |
* qca_wlan_twt_setup_state: Represents the TWT session states. |
| 8697 |
* |
| 8698 |
* QCA_WLAN_TWT_SETUP_STATE_NOT_ESTABLISHED: TWT session not established. |
| 8699 |
* QCA_WLAN_TWT_SETUP_STATE_ACTIVE: TWT session is active. |
| 8700 |
* QCA_WLAN_TWT_SETUP_STATE_SUSPEND: TWT session is in suspended state. |
| 8701 |
*/ |
| 8702 |
enum qca_wlan_twt_setup_state { |
| 8703 |
QCA_WLAN_TWT_SETUP_STATE_NOT_ESTABLISHED = 0, |
| 8704 |
QCA_WLAN_TWT_SETUP_STATE_ACTIVE = 1, |
| 8705 |
QCA_WLAN_TWT_SETUP_STATE_SUSPEND = 2, |
| 8706 |
}; |
| 8707 |
|
| 8708 |
/** |
| 8709 |
* enum qca_wlan_vendor_attr_twt_setup: Represents attributes for |
| 8710 |
* TWT (Target Wake Time) setup request. These attributes are sent as part of |
| 8711 |
* %QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_TWT_SETUP and |
| 8712 |
* %QCA_NL80211_VENDOR_SUBCMD_WIFI_TEST_CONFIGURATION. Also used by |
| 8713 |
* attributes through %QCA_NL80211_VENDOR_SUBCMD_CONFIG_TWT. |
| 8714 |
* |
| 8715 |
* @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_BCAST: Flag attribute. |
| 8716 |
* Disable (flag attribute not present) - Individual TWT |
| 8717 |
* Enable (flag attribute present) - Broadcast TWT. |
| 8718 |
* Individual means the session is between the STA and the AP. |
| 8719 |
* This session is established using a separate negotiation between |
| 8720 |
* STA and AP. |
| 8721 |
* Broadcast means the session is across multiple STAs and an AP. The |
| 8722 |
* configuration parameters are announced in Beacon frames by the AP. |
| 8723 |
* This is used in |
| 8724 |
* 1. TWT SET Request and Response |
| 8725 |
* 2. TWT GET Response |
| 8726 |
* |
| 8727 |
* @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_REQ_TYPE: Required (u8). |
| 8728 |
* Unsigned 8-bit qca_wlan_vendor_twt_setup_req_type to |
| 8729 |
* specify the TWT request type. This is used in TWT SET operation. |
| 8730 |
* |
| 8731 |
* @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_TRIGGER: Flag attribute |
| 8732 |
* Enable (flag attribute present) - TWT with trigger support. |
| 8733 |
* Disable (flag attribute not present) - TWT without trigger support. |
| 8734 |
* Trigger means the AP will send the trigger frame to allow STA to send data. |
| 8735 |
* Without trigger, the STA will wait for the MU EDCA timer before |
| 8736 |
* transmitting the data. |
| 8737 |
* This is used in |
| 8738 |
* 1. TWT SET Request and Response |
| 8739 |
* 2. TWT GET Response |
| 8740 |
* |
| 8741 |
* @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_FLOW_TYPE: Required (u8) |
| 8742 |
* 0 - Announced TWT - In this mode, STA may skip few service periods to |
| 8743 |
* save more power. If STA wants to wake up, it will send a PS-POLL/QoS |
| 8744 |
* NULL frame to AP. |
| 8745 |
* 1 - Unannounced TWT - The STA will wakeup during every SP. |
| 8746 |
* This is a required parameter for |
| 8747 |
* 1. TWT SET Request and Response |
| 8748 |
* 2. TWT GET Response |
| 8749 |
* |
| 8750 |
* @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_FLOW_ID: Optional (u8) |
| 8751 |
* Flow ID is the unique identifier for each TWT session. |
| 8752 |
* If not provided then dialog ID will be set to zero. |
| 8753 |
* This is an optional parameter for |
| 8754 |
* 1. TWT SET Request and Response |
| 8755 |
* 2. TWT GET Request and Response |
| 8756 |
* 3. TWT TERMINATE Request and Response |
| 8757 |
* 4. TWT SUSPEND Request and Response |
| 8758 |
* Flow ID values from 0 to 254 represent a single TWT session |
| 8759 |
* Flow ID value of 255 represents all TWT sessions for the following |
| 8760 |
* 1. TWT TERMINATE Request and Response |
| 8761 |
* 2. TWT SUSPEND Request and Response |
| 8762 |
* 4. TWT CLEAR STATISTICS request |
| 8763 |
* 5. TWT GET STATISTICS request and response |
| 8764 |
* If an invalid dialog ID is provided, status |
| 8765 |
* QCA_WLAN_VENDOR_TWT_STATUS_SESSION_NOT_EXIST will be returned. |
| 8766 |
* |
| 8767 |
* @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_WAKE_INTVL_EXP: Required (u8) |
| 8768 |
* This attribute (exp) is used along with the mantissa to derive the |
| 8769 |
* wake interval using the following formula: |
| 8770 |
* pow(2,exp) = wake_intvl_us/wake_intvl_mantis |
| 8771 |
* Wake interval is the interval between 2 successive SP. |
| 8772 |
* This is a required parameter for |
| 8773 |
* 1. TWT SET Request and Response |
| 8774 |
* 2. TWT GET Response |
| 8775 |
* |
| 8776 |
* @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_PROTECTION: Flag attribute |
| 8777 |
* Enable (flag attribute present) - Protection required. |
| 8778 |
* Disable (flag attribute not present) - Protection not required. |
| 8779 |
* If protection is enabled, then the AP will use protection |
| 8780 |
* mechanism using RTS/CTS to self to reserve the airtime. |
| 8781 |
* This is used in |
| 8782 |
* 1. TWT SET Request and Response |
| 8783 |
* 2. TWT GET Response |
| 8784 |
* |
| 8785 |
* @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_WAKE_TIME: Optional (u32) |
| 8786 |
* This attribute is used as the SP offset which is the offset from |
| 8787 |
* TSF after which the wake happens. The units are in microseconds. If |
| 8788 |
* this attribute is not provided, then the value will be set to zero. |
| 8789 |
* This is an optional parameter for |
| 8790 |
* 1. TWT SET Request and Response |
| 8791 |
* 2. TWT GET Response |
| 8792 |
* |
| 8793 |
* @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_WAKE_DURATION: Required (u32) |
| 8794 |
* This is the duration of the service period. This is specified as |
| 8795 |
* multiples of 256 microseconds. Valid values are 0x1 to 0xFF. |
| 8796 |
* This is a required parameter for |
| 8797 |
* 1. TWT SET Request and Response |
| 8798 |
* 2. TWT GET Response |
| 8799 |
* |
| 8800 |
* @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_WAKE_INTVL_MANTISSA: Required (u32) |
| 8801 |
* This attribute is used to configure wake interval mantissa. |
| 8802 |
* The units are in TU. |
| 8803 |
* This is a required parameter for |
| 8804 |
* 1. TWT SET Request and Response |
| 8805 |
* 2. TWT GET Response |
| 8806 |
* |
| 8807 |
* @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_STATUS: Required (u8) |
| 8808 |
* This field is applicable for TWT response only. |
| 8809 |
* This contains status values in enum qca_wlan_vendor_twt_status |
| 8810 |
* and is passed to the userspace. This is used in TWT SET operation. |
| 8811 |
* This is a required parameter for |
| 8812 |
* 1. TWT SET Response |
| 8813 |
* 2. TWT TERMINATE Response |
| 8814 |
* 3. TWT SUSPEND Response |
| 8815 |
* 4. TWT RESUME Response |
| 8816 |
* 5. TWT NUDGE Response |
| 8817 |
* |
| 8818 |
* @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_RESP_TYPE: Required (u8) |
| 8819 |
* This field is applicable for TWT response only. |
| 8820 |
* This field contains response type from the TWT responder and is |
| 8821 |
* passed to the userspace. The values for this field are defined in |
| 8822 |
* enum qca_wlan_vendor_twt_setup_resp_type. This is used in TWT SET |
| 8823 |
* response. |
| 8824 |
* |
| 8825 |
* @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_WAKE_TIME_TSF: Required (u64) |
| 8826 |
* In TWT setup command this field contains absolute TSF that will |
| 8827 |
* be used by TWT requester during setup. |
| 8828 |
* In TWT response this field contains absolute TSF value of the |
| 8829 |
* wake time received from the TWT responder and is passed to |
| 8830 |
* the userspace. |
| 8831 |
* This is an optional parameter for |
| 8832 |
* 1. TWT SET Request |
| 8833 |
* This is a required parameter for |
| 8834 |
* 1. TWT SET Response |
| 8835 |
* 2. TWT GET Response |
| 8836 |
* |
| 8837 |
* @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_TWT_INFO_ENABLED: Flag attribute. |
| 8838 |
* Enable (flag attribute present) - Indicates that the TWT responder |
| 8839 |
* supports reception of TWT information frame from the TWT requestor. |
| 8840 |
* Disable (flag attribute not present) - Indicates that the responder |
| 8841 |
* doesn't support reception of TWT information frame from requestor. |
| 8842 |
* This is used in |
| 8843 |
* 1. TWT SET Response |
| 8844 |
* 2. TWT GET Response |
| 8845 |
* |
| 8846 |
* @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_MAC_ADDR: 6-byte MAC address |
| 8847 |
* Represents the MAC address of the peer for which the TWT session |
| 8848 |
* is being configured. This is used in AP mode to represent the respective |
| 8849 |
* client. |
| 8850 |
* In AP mode, this is a required parameter in response for |
| 8851 |
* 1. TWT SET |
| 8852 |
* 2. TWT GET |
| 8853 |
* 3. TWT TERMINATE |
| 8854 |
* 4. TWT SUSPEND |
| 8855 |
* In STA mode, this is an optional parameter in request and response for |
| 8856 |
* the above four TWT operations. |
| 8857 |
* In AP mode, this is a required parameter in request for |
| 8858 |
* 1. TWT GET |
| 8859 |
* 2. TWT TERMINATE |
| 8860 |
* |
| 8861 |
* @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_MIN_WAKE_INTVL: Optional (u32) |
| 8862 |
* Minimum tolerance limit of wake interval parameter in microseconds. |
| 8863 |
* |
| 8864 |
* @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_MAX_WAKE_INTVL: Optional (u32) |
| 8865 |
* Maximum tolerance limit of wake interval parameter in microseconds. |
| 8866 |
* |
| 8867 |
* @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_MIN_WAKE_DURATION: Optional (u32) |
| 8868 |
* Minimum tolerance limit of wake duration parameter in microseconds. |
| 8869 |
* |
| 8870 |
* @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_MAX_WAKE_DURATION: Optional (u32) |
| 8871 |
* Maximum tolerance limit of wake duration parameter in microseconds. |
| 8872 |
* |
| 8873 |
* @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_STATE: Optional (u32) |
| 8874 |
* TWT state for the given dialog id. The values for this are represented |
| 8875 |
* by enum qca_wlan_twt_setup_state. |
| 8876 |
* This is obtained through TWT GET operation. |
| 8877 |
* |
| 8878 |
* @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_WAKE_INTVL2_MANTISSA: Optional (u32) |
| 8879 |
* This attribute is used to configure wake interval mantissa. |
| 8880 |
* The unit is microseconds. This attribute, when specified, takes |
| 8881 |
* precedence over QCA_WLAN_VENDOR_ATTR_TWT_SETUP_WAKE_INTVL_MANTISSA. |
| 8882 |
* This parameter is used for |
| 8883 |
* 1. TWT SET Request and Response |
| 8884 |
* 2. TWT GET Response |
| 8885 |
* |
| 8886 |
* @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_BCAST_ID: Optional (u8) |
| 8887 |
* This attribute is used to configure Broadcast TWT ID. |
| 8888 |
* The Broadcast TWT ID indicates a specific Broadcast TWT for which the |
| 8889 |
* transmitting STA is providing TWT parameters. The allowed values are 0 to 31. |
| 8890 |
* This parameter is used for |
| 8891 |
* 1. TWT SET Request |
| 8892 |
* 2. TWT TERMINATE Request |
| 8893 |
* |
| 8894 |
* @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_BCAST_RECOMMENDATION: Optional (u8) |
| 8895 |
* This attribute is used to configure Broadcast TWT recommendation. |
| 8896 |
* The Broadcast TWT Recommendation subfield contains a value that indicates |
| 8897 |
* recommendations on the types of frames that are transmitted by TWT |
| 8898 |
* scheduled STAs and scheduling AP during the broadcast TWT SP. |
| 8899 |
* The allowed values are 0 - 3. |
| 8900 |
* This parameter is used for |
| 8901 |
* 1. TWT SET Request |
| 8902 |
* |
| 8903 |
* @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_BCAST_PERSISTENCE: Optional (u8) |
| 8904 |
* This attribute is used to configure Broadcast TWT Persistence. |
| 8905 |
* The Broadcast TWT Persistence subfield indicates the number of |
| 8906 |
* TBTTs during which the Broadcast TWT SPs corresponding to this |
| 8907 |
* broadcast TWT Parameter set are present. The number of beacon intervals |
| 8908 |
* during which the Broadcast TWT SPs are present is equal to the value in the |
| 8909 |
* Broadcast TWT Persistence subfield plus 1 except that the value 255 |
| 8910 |
* indicates that the Broadcast TWT SPs are present until explicitly terminated. |
| 8911 |
* This parameter is used for |
| 8912 |
* 1. TWT SET Request |
| 8913 |
* |
| 8914 |
* @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_RESPONDER_PM_MODE: Optional (u8) |
| 8915 |
* This attribute contains the value of the Responder PM Mode subfield (0 or 1) |
| 8916 |
* from TWT response frame. |
| 8917 |
* This parameter is used for |
| 8918 |
* 1. TWT SET Response |
| 8919 |
* 2. TWT GET Response |
| 8920 |
* |
| 8921 |
* @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_ANNOUNCE_TIMEOUT: Optional (u32) |
| 8922 |
* This attribute is used to configure the announce timeout value (in us) in |
| 8923 |
* the firmware. This timeout value is only applicable for the announced TWT. If |
| 8924 |
* the timeout value is non-zero the firmware waits up to the timeout value to |
| 8925 |
* use Data frame as an announcement frame. If the timeout value is 0 the |
| 8926 |
* firmware sends an explicit QoS NULL frame as the announcement frame on SP |
| 8927 |
* start. The default value in the firmware is 0. |
| 8928 |
* This parameter is used for |
| 8929 |
* 1. TWT SET Request |
| 8930 |
*/ |
| 8931 |
enum qca_wlan_vendor_attr_twt_setup { |
| 8932 |
QCA_WLAN_VENDOR_ATTR_TWT_SETUP_INVALID = 0, |
| 8933 |
QCA_WLAN_VENDOR_ATTR_TWT_SETUP_BCAST = 1, |
| 8934 |
QCA_WLAN_VENDOR_ATTR_TWT_SETUP_REQ_TYPE = 2, |
| 8935 |
QCA_WLAN_VENDOR_ATTR_TWT_SETUP_TRIGGER = 3, |
| 8936 |
QCA_WLAN_VENDOR_ATTR_TWT_SETUP_FLOW_TYPE = 4, |
| 8937 |
QCA_WLAN_VENDOR_ATTR_TWT_SETUP_FLOW_ID = 5, |
| 8938 |
QCA_WLAN_VENDOR_ATTR_TWT_SETUP_WAKE_INTVL_EXP = 6, |
| 8939 |
QCA_WLAN_VENDOR_ATTR_TWT_SETUP_PROTECTION = 7, |
| 8940 |
QCA_WLAN_VENDOR_ATTR_TWT_SETUP_WAKE_TIME = 8, |
| 8941 |
QCA_WLAN_VENDOR_ATTR_TWT_SETUP_WAKE_DURATION = 9, |
| 8942 |
QCA_WLAN_VENDOR_ATTR_TWT_SETUP_WAKE_INTVL_MANTISSA = 10, |
| 8943 |
|
| 8944 |
/* TWT Response only attributes */ |
| 8945 |
QCA_WLAN_VENDOR_ATTR_TWT_SETUP_STATUS = 11, |
| 8946 |
QCA_WLAN_VENDOR_ATTR_TWT_SETUP_RESP_TYPE = 12, |
| 8947 |
QCA_WLAN_VENDOR_ATTR_TWT_SETUP_WAKE_TIME_TSF = 13, |
| 8948 |
QCA_WLAN_VENDOR_ATTR_TWT_SETUP_TWT_INFO_ENABLED = 14, |
| 8949 |
|
| 8950 |
QCA_WLAN_VENDOR_ATTR_TWT_SETUP_MAC_ADDR = 15, |
| 8951 |
QCA_WLAN_VENDOR_ATTR_TWT_SETUP_MIN_WAKE_INTVL = 16, |
| 8952 |
QCA_WLAN_VENDOR_ATTR_TWT_SETUP_MAX_WAKE_INTVL = 17, |
| 8953 |
QCA_WLAN_VENDOR_ATTR_TWT_SETUP_MIN_WAKE_DURATION = 18, |
| 8954 |
QCA_WLAN_VENDOR_ATTR_TWT_SETUP_MAX_WAKE_DURATION = 19, |
| 8955 |
QCA_WLAN_VENDOR_ATTR_TWT_SETUP_STATE = 20, |
| 8956 |
|
| 8957 |
QCA_WLAN_VENDOR_ATTR_TWT_SETUP_WAKE_INTVL2_MANTISSA = 21, |
| 8958 |
|
| 8959 |
QCA_WLAN_VENDOR_ATTR_TWT_SETUP_BCAST_ID = 22, |
| 8960 |
QCA_WLAN_VENDOR_ATTR_TWT_SETUP_BCAST_RECOMMENDATION = 23, |
| 8961 |
QCA_WLAN_VENDOR_ATTR_TWT_SETUP_BCAST_PERSISTENCE = 24, |
| 8962 |
|
| 8963 |
QCA_WLAN_VENDOR_ATTR_TWT_SETUP_RESPONDER_PM_MODE = 25, |
| 8964 |
QCA_WLAN_VENDOR_ATTR_TWT_SETUP_ANNOUNCE_TIMEOUT = 26, |
| 8965 |
|
| 8966 |
/* keep last */ |
| 8967 |
QCA_WLAN_VENDOR_ATTR_TWT_SETUP_AFTER_LAST, |
| 8968 |
QCA_WLAN_VENDOR_ATTR_TWT_SETUP_MAX = |
| 8969 |
QCA_WLAN_VENDOR_ATTR_TWT_SETUP_AFTER_LAST - 1, |
| 8970 |
}; |
| 8971 |
|
| 8972 |
/** |
| 8973 |
* enum qca_wlan_vendor_twt_status - Represents the status of the requested |
| 8974 |
* TWT operation |
| 8975 |
* |
| 8976 |
* @QCA_WLAN_VENDOR_TWT_STATUS_OK: TWT request successfully completed |
| 8977 |
* @QCA_WLAN_VENDOR_TWT_STATUS_TWT_NOT_ENABLED: TWT not enabled |
| 8978 |
* @QCA_WLAN_VENDOR_TWT_STATUS_USED_DIALOG_ID: TWT dialog ID is already used |
| 8979 |
* @QCA_WLAN_VENDOR_TWT_STATUS_SESSION_BUSY: TWT session is busy |
| 8980 |
* @QCA_WLAN_VENDOR_TWT_STATUS_SESSION_NOT_EXIST: TWT session does not exist |
| 8981 |
* @QCA_WLAN_VENDOR_TWT_STATUS_NOT_SUSPENDED: TWT session not in suspend state |
| 8982 |
* @QCA_WLAN_VENDOR_TWT_STATUS_INVALID_PARAM: Invalid parameters |
| 8983 |
* @QCA_WLAN_VENDOR_TWT_STATUS_NOT_READY: FW not ready |
| 8984 |
* @QCA_WLAN_VENDOR_TWT_STATUS_NO_RESOURCE: FW resource exhausted |
| 8985 |
* @QCA_WLAN_VENDOR_TWT_STATUS_NO_ACK: Peer AP/STA did not ACK the |
| 8986 |
* request/response frame |
| 8987 |
* @QCA_WLAN_VENDOR_TWT_STATUS_NO_RESPONSE: Peer AP did not send the response |
| 8988 |
* frame |
| 8989 |
* @QCA_WLAN_VENDOR_TWT_STATUS_DENIED: AP did not accept the request |
| 8990 |
* @QCA_WLAN_VENDOR_TWT_STATUS_UNKNOWN_ERROR: Adding TWT dialog failed due to an |
| 8991 |
* unknown reason |
| 8992 |
* @QCA_WLAN_VENDOR_TWT_STATUS_ALREADY_SUSPENDED: TWT session already in |
| 8993 |
* suspend state |
| 8994 |
* @QCA_WLAN_VENDOR_TWT_STATUS_IE_INVALID: FW has dropped the frame due to |
| 8995 |
* invalid IE in the received TWT frame |
| 8996 |
* @QCA_WLAN_VENDOR_TWT_STATUS_PARAMS_NOT_IN_RANGE: Parameters received from |
| 8997 |
* the responder are not in the specified range |
| 8998 |
* @QCA_WLAN_VENDOR_TWT_STATUS_PEER_INITIATED_TERMINATE: FW terminated the TWT |
| 8999 |
* session due to request from the responder. Used on the TWT_TERMINATE |
| 9000 |
* notification from the firmware. |
| 9001 |
* @QCA_WLAN_VENDOR_TWT_STATUS_ROAM_INITIATED_TERMINATE: FW terminated the TWT |
| 9002 |
* session due to roaming. Used on the TWT_TERMINATE notification from the |
| 9003 |
* firmware. |
| 9004 |
* @QCA_WLAN_VENDOR_TWT_STATUS_SCC_MCC_CONCURRENCY_TERMINATE: FW terminated the |
| 9005 |
* TWT session due to SCC (Single Channel Concurrency) and MCC (Multi Channel |
| 9006 |
* Concurrency). Used on the TWT_TERMINATE notification from the firmware. |
| 9007 |
* @QCA_WLAN_VENDOR_TWT_STATUS_ROAMING_IN_PROGRESS: FW rejected the TWT setup |
| 9008 |
* request due to roaming in progress. |
| 9009 |
* @QCA_WLAN_VENDOR_TWT_STATUS_CHANNEL_SWITCH_IN_PROGRESS: FW rejected the TWT |
| 9010 |
* setup request due to channel switch in progress. |
| 9011 |
* @QCA_WLAN_VENDOR_TWT_STATUS_SCAN_IN_PROGRESS: FW rejected the TWT setup |
| 9012 |
* request due to scan in progress. |
| 9013 |
* QCA_WLAN_VENDOR_TWT_STATUS_POWER_SAVE_EXIT_TERMINATE: The driver requested to |
| 9014 |
* terminate an existing TWT session on power save exit request from userspace. |
| 9015 |
* Used on the TWT_TERMINATE notification from the driver/firmware. |
| 9016 |
*/ |
| 9017 |
enum qca_wlan_vendor_twt_status { |
| 9018 |
QCA_WLAN_VENDOR_TWT_STATUS_OK = 0, |
| 9019 |
QCA_WLAN_VENDOR_TWT_STATUS_TWT_NOT_ENABLED = 1, |
| 9020 |
QCA_WLAN_VENDOR_TWT_STATUS_USED_DIALOG_ID = 2, |
| 9021 |
QCA_WLAN_VENDOR_TWT_STATUS_SESSION_BUSY = 3, |
| 9022 |
QCA_WLAN_VENDOR_TWT_STATUS_SESSION_NOT_EXIST = 4, |
| 9023 |
QCA_WLAN_VENDOR_TWT_STATUS_NOT_SUSPENDED = 5, |
| 9024 |
QCA_WLAN_VENDOR_TWT_STATUS_INVALID_PARAM = 6, |
| 9025 |
QCA_WLAN_VENDOR_TWT_STATUS_NOT_READY = 7, |
| 9026 |
QCA_WLAN_VENDOR_TWT_STATUS_NO_RESOURCE = 8, |
| 9027 |
QCA_WLAN_VENDOR_TWT_STATUS_NO_ACK = 9, |
| 9028 |
QCA_WLAN_VENDOR_TWT_STATUS_NO_RESPONSE = 10, |
| 9029 |
QCA_WLAN_VENDOR_TWT_STATUS_DENIED = 11, |
| 9030 |
QCA_WLAN_VENDOR_TWT_STATUS_UNKNOWN_ERROR = 12, |
| 9031 |
QCA_WLAN_VENDOR_TWT_STATUS_ALREADY_SUSPENDED = 13, |
| 9032 |
QCA_WLAN_VENDOR_TWT_STATUS_IE_INVALID = 14, |
| 9033 |
QCA_WLAN_VENDOR_TWT_STATUS_PARAMS_NOT_IN_RANGE = 15, |
| 9034 |
QCA_WLAN_VENDOR_TWT_STATUS_PEER_INITIATED_TERMINATE = 16, |
| 9035 |
QCA_WLAN_VENDOR_TWT_STATUS_ROAM_INITIATED_TERMINATE = 17, |
| 9036 |
QCA_WLAN_VENDOR_TWT_STATUS_SCC_MCC_CONCURRENCY_TERMINATE = 18, |
| 9037 |
QCA_WLAN_VENDOR_TWT_STATUS_ROAMING_IN_PROGRESS = 19, |
| 9038 |
QCA_WLAN_VENDOR_TWT_STATUS_CHANNEL_SWITCH_IN_PROGRESS = 20, |
| 9039 |
QCA_WLAN_VENDOR_TWT_STATUS_SCAN_IN_PROGRESS = 21, |
| 9040 |
QCA_WLAN_VENDOR_TWT_STATUS_POWER_SAVE_EXIT_TERMINATE = 22, |
| 9041 |
}; |
| 9042 |
|
| 9043 |
/** |
| 9044 |
* enum qca_wlan_vendor_attr_twt_resume - Represents attributes for |
| 9045 |
* TWT (Target Wake Time) resume request. These attributes are sent as part of |
| 9046 |
* %QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_TWT_RESUME and |
| 9047 |
* %QCA_NL80211_VENDOR_SUBCMD_WIFI_TEST_CONFIGURATION. Also used by |
| 9048 |
* attributes through %QCA_NL80211_VENDOR_SUBCMD_CONFIG_TWT. |
| 9049 |
* |
| 9050 |
* @QCA_WLAN_VENDOR_ATTR_TWT_RESUME_NEXT_TWT: Optional (u8) |
| 9051 |
* @QCA_WLAN_VENDOR_ATTR_TWT_RESUME_NEXT2_TWT: Optional (u32) |
| 9052 |
* These attributes are used as the SP offset which is the offset from TSF after |
| 9053 |
* which the wake happens. The units are in microseconds. Please note that |
| 9054 |
* _NEXT_TWT is limited to u8 whereas _NEXT2_TWT takes the u32 data. |
| 9055 |
* _NEXT2_TWT takes the precedence over _NEXT_TWT and thus the recommendation |
| 9056 |
* is to use _NEXT2_TWT. If neither of these attributes is provided, the value |
| 9057 |
* will be set to zero. |
| 9058 |
* |
| 9059 |
* @QCA_WLAN_VENDOR_ATTR_TWT_RESUME_NEXT_TWT_SIZE: Required (u32) |
| 9060 |
* This attribute represents the next TWT subfield size. |
| 9061 |
* Value 0 represents 0 bits, 1 represents 32 bits, 2 for 48 bits, |
| 9062 |
* and 4 for 64 bits. |
| 9063 |
* |
| 9064 |
* @QCA_WLAN_VENDOR_ATTR_TWT_RESUME_FLOW_ID: Required (u8). |
| 9065 |
* Flow ID is the unique identifier for each TWT session. This attribute |
| 9066 |
* represents the respective TWT session to resume. |
| 9067 |
* Flow ID values from 0 to 254 represent a single TWT session |
| 9068 |
* Flow ID value of 255 represents all TWT sessions. |
| 9069 |
* If an invalid dialog id is provided, status |
| 9070 |
* QCA_WLAN_VENDOR_TWT_STATUS_SESSION_NOT_EXIST will be returned. |
| 9071 |
* |
| 9072 |
* @QCA_WLAN_VENDOR_ATTR_TWT_RESUME_MAC_ADDR: 6-byte MAC address |
| 9073 |
* Represents the MAC address of the peer to which TWT Resume is |
| 9074 |
* being sent. This is used in AP mode to represent the respective |
| 9075 |
* client and is a required parameter. In STA mode, this is an optional |
| 9076 |
* parameter |
| 9077 |
*/ |
| 9078 |
enum qca_wlan_vendor_attr_twt_resume { |
| 9079 |
QCA_WLAN_VENDOR_ATTR_TWT_RESUME_INVALID = 0, |
| 9080 |
QCA_WLAN_VENDOR_ATTR_TWT_RESUME_NEXT_TWT = 1, |
| 9081 |
QCA_WLAN_VENDOR_ATTR_TWT_RESUME_NEXT_TWT_SIZE = 2, |
| 9082 |
QCA_WLAN_VENDOR_ATTR_TWT_RESUME_FLOW_ID = 3, |
| 9083 |
QCA_WLAN_VENDOR_ATTR_TWT_RESUME_NEXT2_TWT = 4, |
| 9084 |
QCA_WLAN_VENDOR_ATTR_TWT_RESUME_MAC_ADDR = 5, |
| 9085 |
|
| 9086 |
/* keep last */ |
| 9087 |
QCA_WLAN_VENDOR_ATTR_TWT_RESUME_AFTER_LAST, |
| 9088 |
QCA_WLAN_VENDOR_ATTR_TWT_RESUME_MAX = |
| 9089 |
QCA_WLAN_VENDOR_ATTR_TWT_RESUME_AFTER_LAST - 1, |
| 9090 |
}; |
| 9091 |
|
| 9092 |
/** |
| 9093 |
* enum qca_wlan_vendor_attr_twt_nudge - Represents attributes for |
| 9094 |
* TWT (Target Wake Time) nudge request. TWT nudge is a combination of suspend |
| 9095 |
* and resume in a single request. These attributes are sent as part of |
| 9096 |
* %QCA_NL80211_VENDOR_SUBCMD_CONFIG_TWT. |
| 9097 |
* |
| 9098 |
* @QCA_WLAN_VENDOR_ATTR_TWT_NUDGE_FLOW_ID: Required (u8) |
| 9099 |
* Flow ID is the unique identifier for each TWT session. This attribute |
| 9100 |
* represents the respective TWT session to suspend and resume. |
| 9101 |
* Flow ID values from 0 to 254 represent a single TWT session |
| 9102 |
* Flow ID value of 255 represents all TWT sessions in TWT NUDGE request |
| 9103 |
* and response. |
| 9104 |
* If an invalid dialog id is provided, status |
| 9105 |
* QCA_WLAN_VENDOR_TWT_STATUS_SESSION_NOT_EXIST will be returned. |
| 9106 |
* |
| 9107 |
* @QCA_WLAN_VENDOR_ATTR_TWT_NUDGE_WAKE_TIME: Required (u32) |
| 9108 |
* This attribute is used as the SP offset which is the offset from |
| 9109 |
* TSF after which the wake happens. The units are in microseconds. |
| 9110 |
* |
| 9111 |
* @QCA_WLAN_VENDOR_ATTR_TWT_NUDGE_NEXT_TWT_SIZE: Required (u32) |
| 9112 |
* This attribute represents the next TWT subfield size. |
| 9113 |
* Value 0 represents 0 bits, 1 represents 32 bits, 2 for 48 bits, |
| 9114 |
* and 4 for 64 bits. |
| 9115 |
* |
| 9116 |
* @QCA_WLAN_VENDOR_ATTR_TWT_NUDGE_MAC_ADDR: 6-byte MAC address |
| 9117 |
* Represents the MAC address of the peer to which TWT Suspend and Resume is |
| 9118 |
* being sent. This is used in AP mode to represent the respective |
| 9119 |
* client and is a required parameter. In STA mode, this is an optional |
| 9120 |
* parameter. |
| 9121 |
* |
| 9122 |
* @QCA_WLAN_VENDOR_ATTR_TWT_NUDGE_WAKE_TIME_TSF: Optional (u64) |
| 9123 |
* This field contains absolute TSF value of the time at which the TWT |
| 9124 |
* session will be resumed. |
| 9125 |
*/ |
| 9126 |
enum qca_wlan_vendor_attr_twt_nudge { |
| 9127 |
QCA_WLAN_VENDOR_ATTR_TWT_NUDGE_INVALID = 0, |
| 9128 |
QCA_WLAN_VENDOR_ATTR_TWT_NUDGE_FLOW_ID = 1, |
| 9129 |
QCA_WLAN_VENDOR_ATTR_TWT_NUDGE_WAKE_TIME = 2, |
| 9130 |
QCA_WLAN_VENDOR_ATTR_TWT_NUDGE_NEXT_TWT_SIZE = 3, |
| 9131 |
QCA_WLAN_VENDOR_ATTR_TWT_NUDGE_MAC_ADDR = 4, |
| 9132 |
QCA_WLAN_VENDOR_ATTR_TWT_NUDGE_WAKE_TIME_TSF = 5, |
| 9133 |
|
| 9134 |
/* keep last */ |
| 9135 |
QCA_WLAN_VENDOR_ATTR_TWT_NUDGE_AFTER_LAST, |
| 9136 |
QCA_WLAN_VENDOR_ATTR_TWT_NUDGE_MAX = |
| 9137 |
QCA_WLAN_VENDOR_ATTR_TWT_NUDGE_AFTER_LAST - 1, |
| 9138 |
}; |
| 9139 |
|
| 9140 |
/** |
| 9141 |
* enum qca_wlan_vendor_attr_twt_stats: Represents attributes for |
| 9142 |
* TWT (Target Wake Time) get statistics and clear statistics request. |
| 9143 |
* These attributes are sent as part of |
| 9144 |
* %QCA_NL80211_VENDOR_SUBCMD_CONFIG_TWT. |
| 9145 |
* |
| 9146 |
* @QCA_WLAN_VENDOR_ATTR_TWT_STATS_FLOW_ID: Required (u8) |
| 9147 |
* Flow ID is the unique identifier for each TWT session. This attribute |
| 9148 |
* represents the respective TWT session for get and clear TWT statistics. |
| 9149 |
* Flow ID values from 0 to 254 represent a single TWT session |
| 9150 |
* Flow ID value of 255 represents all TWT sessions in |
| 9151 |
* 1) TWT GET STATISTICS request and response |
| 9152 |
* 2) TWT CLEAR STATISTICS request |
| 9153 |
* |
| 9154 |
* @QCA_WLAN_VENDOR_ATTR_TWT_STATS_MAC_ADDR: 6-byte MAC address |
| 9155 |
* Represents the MAC address of the peer for which TWT Statistics |
| 9156 |
* is required. |
| 9157 |
* In AP mode this is used to represent the respective |
| 9158 |
* client and is a required parameter for |
| 9159 |
* 1) TWT GET STATISTICS request and response |
| 9160 |
* 2) TWT CLEAR STATISTICS request and response |
| 9161 |
* In STA mode, this is an optional parameter. |
| 9162 |
* |
| 9163 |
* @QCA_WLAN_VENDOR_ATTR_TWT_STATS_SESSION_WAKE_DURATION: Required (u32) |
| 9164 |
* This is the duration of the service period in microseconds. |
| 9165 |
* Obtained in the QCA_WLAN_TWT_GET_STATS response from the firmware. |
| 9166 |
* |
| 9167 |
* @QCA_WLAN_VENDOR_ATTR_TWT_STATS_AVG_WAKE_DURATION: Required (u32) |
| 9168 |
* Average of the actual wake duration observed so far. Unit is microseconds. |
| 9169 |
* Obtained in the QCA_WLAN_TWT_GET_STATS response from the firmware. |
| 9170 |
* |
| 9171 |
* @QCA_WLAN_VENDOR_ATTR_TWT_STATS_NUM_SP_ITERATIONS: Required (u32) |
| 9172 |
* The number of TWT service periods elapsed so far. |
| 9173 |
* Obtained in the QCA_WLAN_TWT_GET_STATS response from the firmware. |
| 9174 |
* |
| 9175 |
* @QCA_WLAN_VENDOR_ATTR_TWT_STATS_MIN_WAKE_DURATION: Required (u32) |
| 9176 |
* This is the minimum value of the wake duration observed across |
| 9177 |
* QCA_WLAN_VENDOR_ATTR_TWT_STATS_NUM_SP_ITERATIONS. Unit is |
| 9178 |
* microseconds. |
| 9179 |
* Obtained in the QCA_WLAN_TWT_GET_STATS response from the firmware. |
| 9180 |
* |
| 9181 |
* @QCA_WLAN_VENDOR_ATTR_TWT_STATS_MAX_WAKE_DURATION: Required (u32) |
| 9182 |
* This is the maximum value of wake duration observed across |
| 9183 |
* QCA_WLAN_VENDOR_ATTR_TWT_STATS_NUM_SP_ITERATIONS. Unit is |
| 9184 |
* microseconds. |
| 9185 |
* Obtained in the QCA_WLAN_TWT_GET_STATS response from the firmware. |
| 9186 |
* |
| 9187 |
* @QCA_WLAN_VENDOR_ATTR_TWT_STATS_AVERAGE_TX_MPDU: Required (u32) |
| 9188 |
* Average number of MPDUs transmitted successfully across |
| 9189 |
* QCA_WLAN_VENDOR_ATTR_TWT_STATS_NUM_SP_ITERATIONS. |
| 9190 |
* Obtained in the QCA_WLAN_TWT_GET_STATS response from the firmware. |
| 9191 |
* |
| 9192 |
* @QCA_WLAN_VENDOR_ATTR_TWT_STATS_AVERAGE_RX_MPDU: Required (u32) |
| 9193 |
* Average number of MPDUs received successfully across |
| 9194 |
* QCA_WLAN_VENDOR_ATTR_TWT_STATS_NUM_SP_ITERATIONS. |
| 9195 |
* Obtained in the QCA_WLAN_TWT_GET_STATS response from the firmware. |
| 9196 |
* |
| 9197 |
* @QCA_WLAN_VENDOR_ATTR_TWT_STATS_AVERAGE_TX_PACKET_SIZE: Required (u32) |
| 9198 |
* Average number of bytes transmitted successfully across |
| 9199 |
* QCA_WLAN_VENDOR_ATTR_TWT_STATS_NUM_SP_ITERATIONS. |
| 9200 |
* Obtained in the QCA_WLAN_TWT_GET_STATS response from the firmware. |
| 9201 |
* |
| 9202 |
* @QCA_WLAN_VENDOR_ATTR_TWT_STATS_AVERAGE_RX_PACKET_SIZE: Required (u32) |
| 9203 |
* Average number of bytes received successfully across |
| 9204 |
* QCA_WLAN_VENDOR_ATTR_TWT_STATS_NUM_SP_ITERATIONS. |
| 9205 |
* Obtained in the QCA_WLAN_TWT_GET_STATS response from the firmware. |
| 9206 |
* |
| 9207 |
* @QCA_WLAN_VENDOR_ATTR_TWT_STATS_STATUS: Required (u32) |
| 9208 |
* Status of the TWT GET STATISTICS request. |
| 9209 |
* This contains status values in enum qca_wlan_vendor_twt_status |
| 9210 |
* Obtained in the QCA_WLAN_TWT_GET_STATS response from the firmware. |
| 9211 |
*/ |
| 9212 |
enum qca_wlan_vendor_attr_twt_stats { |
| 9213 |
QCA_WLAN_VENDOR_ATTR_TWT_STATS_INVALID = 0, |
| 9214 |
QCA_WLAN_VENDOR_ATTR_TWT_STATS_FLOW_ID = 1, |
| 9215 |
QCA_WLAN_VENDOR_ATTR_TWT_STATS_MAC_ADDR = 2, |
| 9216 |
QCA_WLAN_VENDOR_ATTR_TWT_STATS_SESSION_WAKE_DURATION = 3, |
| 9217 |
QCA_WLAN_VENDOR_ATTR_TWT_STATS_AVG_WAKE_DURATION = 4, |
| 9218 |
QCA_WLAN_VENDOR_ATTR_TWT_STATS_NUM_SP_ITERATIONS = 5, |
| 9219 |
QCA_WLAN_VENDOR_ATTR_TWT_STATS_MIN_WAKE_DURATION = 6, |
| 9220 |
QCA_WLAN_VENDOR_ATTR_TWT_STATS_MAX_WAKE_DURATION = 7, |
| 9221 |
QCA_WLAN_VENDOR_ATTR_TWT_STATS_AVERAGE_TX_MPDU = 8, |
| 9222 |
QCA_WLAN_VENDOR_ATTR_TWT_STATS_AVERAGE_RX_MPDU = 9, |
| 9223 |
QCA_WLAN_VENDOR_ATTR_TWT_STATS_AVERAGE_TX_PACKET_SIZE = 10, |
| 9224 |
QCA_WLAN_VENDOR_ATTR_TWT_STATS_AVERAGE_RX_PACKET_SIZE = 11, |
| 9225 |
QCA_WLAN_VENDOR_ATTR_TWT_STATS_STATUS = 12, |
| 9226 |
|
| 9227 |
/* keep last */ |
| 9228 |
QCA_WLAN_VENDOR_ATTR_TWT_STATS_AFTER_LAST, |
| 9229 |
QCA_WLAN_VENDOR_ATTR_TWT_STATS_MAX = |
| 9230 |
QCA_WLAN_VENDOR_ATTR_TWT_STATS_AFTER_LAST - 1, |
| 9231 |
}; |
| 9232 |
|
| 9233 |
/** |
| 9234 |
* qca_wlan_twt_get_capa - Represents the bitmap of TWT capabilities |
| 9235 |
* supported by the device and the peer. |
| 9236 |
* Values for %QCA_WLAN_VENDOR_ATTR_CONFIG_TWT_GET_CAPABILITIES |
| 9237 |
* |
| 9238 |
* @QCA_WLAN_TWT_CAPA_REQUESTOR: TWT requestor support is advertised by |
| 9239 |
* TWT non-scheduling STA. This capability is advertised in the HE |
| 9240 |
* Capability/Extended Capabilities information element in the |
| 9241 |
* Association Request frame by the device. |
| 9242 |
* |
| 9243 |
* @QCA_WLAN_TWT_CAPA_RESPONDER: TWT responder support is advertised by |
| 9244 |
* the TWT scheduling AP. This capability is advertised in the Extended |
| 9245 |
* Capabilities/HE Capabilities information element. |
| 9246 |
* |
| 9247 |
* @QCA_WLAN_TWT_CAPA_BROADCAST: On the requestor side, this indicates support |
| 9248 |
* for the broadcast TWT functionality. On the responder side, this indicates |
| 9249 |
* support for the role of broadcast TWT scheduling functionality. This |
| 9250 |
* capability is advertised in the HE Capabilities information element. |
| 9251 |
* |
| 9252 |
* @QCA_WLAN_TWT_CAPA_TWT_FLEXIBLE: The device supports flexible TWT schedule. |
| 9253 |
* This capability is advertised in the HE Capabilities information element. |
| 9254 |
* |
| 9255 |
* @QCA_WLAN_TWT_CAPA_REQUIRED: The TWT Required is advertised by AP to indicate |
| 9256 |
* that it mandates the associated HE STAs to support TWT. This capability is |
| 9257 |
* advertised by AP in the HE Operation Parameters field of the HE Operation |
| 9258 |
* information element. |
| 9259 |
*/ |
| 9260 |
enum qca_wlan_twt_capa { |
| 9261 |
QCA_WLAN_TWT_CAPA_REQUESTOR = BIT(0), |
| 9262 |
QCA_WLAN_TWT_CAPA_RESPONDER = BIT(1), |
| 9263 |
QCA_WLAN_TWT_CAPA_BROADCAST = BIT(2), |
| 9264 |
QCA_WLAN_TWT_CAPA_FLEXIBLE = BIT(3), |
| 9265 |
QCA_WLAN_TWT_CAPA_REQUIRED = BIT(4), |
| 9266 |
}; |
| 9267 |
|
| 9268 |
/** |
| 9269 |
* enum qca_wlan_vendor_attr_twt_capability - Represents attributes for TWT |
| 9270 |
* get capabilities request type. Used by QCA_WLAN_TWT_GET_CAPABILITIES TWT |
| 9271 |
* operation. |
| 9272 |
* @QCA_WLAN_VENDOR_ATTR_TWT_CAPABILITIES_MAC_ADDR: 6-byte MAC address |
| 9273 |
* Represents the MAC address of the peer for which the TWT capabilities |
| 9274 |
* are being queried. This is used in AP mode to represent the respective |
| 9275 |
* client. In STA mode, this is an optional parameter. |
| 9276 |
* |
| 9277 |
* @QCA_WLAN_VENDOR_ATTR_TWT_CAPABILITIES_SELF: (u16). |
| 9278 |
* Self TWT capabilities. Carries a bitmap of TWT capabilities specified in |
| 9279 |
* enum qca_wlan_twt_capa. |
| 9280 |
* @QCA_WLAN_VENDOR_ATTR_TWT_CAPABILITIES_PEER: (u16). |
| 9281 |
* Peer TWT capabilities. Carries a bitmap of TWT capabilities specified in |
| 9282 |
* enum qca_wlan_twt_capa. |
| 9283 |
*/ |
| 9284 |
enum qca_wlan_vendor_attr_twt_capability { |
| 9285 |
QCA_WLAN_VENDOR_ATTR_TWT_CAPABILITIES_INVALID = 0, |
| 9286 |
QCA_WLAN_VENDOR_ATTR_TWT_CAPABILITIES_MAC_ADDR = 1, |
| 9287 |
QCA_WLAN_VENDOR_ATTR_TWT_CAPABILITIES_SELF = 2, |
| 9288 |
QCA_WLAN_VENDOR_ATTR_TWT_CAPABILITIES_PEER = 3, |
| 9289 |
|
| 9290 |
/* keep last */ |
| 9291 |
QCA_WLAN_VENDOR_ATTR_TWT_CAPABILITIES_AFTER_LAST, |
| 9292 |
QCA_WLAN_VENDOR_ATTR_TWT_CAPABILITIES_MAX = |
| 9293 |
QCA_WLAN_VENDOR_ATTR_TWT_CAPABILITIES_AFTER_LAST - 1, |
| 9294 |
}; |
| 9295 |
|
| 9296 |
/** |
| 9297 |
* enum qca_wlan_vendor_attr_twt_set_param: Represents attributes for |
| 9298 |
* TWT (Target Wake Time) related parameters. It is used when |
| 9299 |
* %QCA_WLAN_VENDOR_ATTR_CONFIG_TWT_OPERATION is set to %QCA_WLAN_TWT_SET_PARAM. |
| 9300 |
* These attributes are sent as part of %QCA_NL80211_VENDOR_SUBCMD_CONFIG_TWT. |
| 9301 |
* |
| 9302 |
* @QCA_WLAN_VENDOR_ATTR_TWT_SET_PARAM_AP_AC_VALUE: Optional (u8) |
| 9303 |
* This attribute configures AC parameters to be used for all TWT |
| 9304 |
* sessions in AP mode. |
| 9305 |
* Uses the enum qca_wlan_ac_type values. |
| 9306 |
*/ |
| 9307 |
enum qca_wlan_vendor_attr_twt_set_param { |
| 9308 |
QCA_WLAN_VENDOR_ATTR_TWT_SET_PARAM_INVALID = 0, |
| 9309 |
QCA_WLAN_VENDOR_ATTR_TWT_SET_PARAM_AP_AC_VALUE = 1, |
| 9310 |
|
| 9311 |
/* keep last */ |
| 9312 |
QCA_WLAN_VENDOR_ATTR_TWT_SET_PARAM_AFTER_LAST, |
| 9313 |
QCA_WLAN_VENDOR_ATTR_TWT_SET_PARAM_MAX = |
| 9314 |
QCA_WLAN_VENDOR_ATTR_TWT_SET_PARAM_AFTER_LAST - 1, |
| 9315 |
}; |
| 9316 |
|
| 9317 |
/** |
| 9318 |
* enum qca_wlan_vendor_twt_setup_resp_type - Represents the response type by |
| 9319 |
* the TWT responder |
| 9320 |
* |
| 9321 |
* @QCA_WLAN_VENDOR_TWT_RESP_ALTERNATE: TWT responder suggests TWT |
| 9322 |
* parameters that are different from TWT requesting STA suggested |
| 9323 |
* or demanded TWT parameters |
| 9324 |
* @QCA_WLAN_VENDOR_TWT_RESP_DICTATE: TWT responder demands TWT |
| 9325 |
* parameters that are different from TWT requesting STA TWT suggested |
| 9326 |
* or demanded parameters |
| 9327 |
* @QCA_WLAN_VENDOR_TWT_RESP_REJECT: TWT responder rejects TWT |
| 9328 |
* setup |
| 9329 |
* @QCA_WLAN_VENDOR_TWT_RESP_ACCEPT: TWT responder accepts the TWT |
| 9330 |
* setup. |
| 9331 |
*/ |
| 9332 |
enum qca_wlan_vendor_twt_setup_resp_type { |
| 9333 |
QCA_WLAN_VENDOR_TWT_RESP_ALTERNATE = 1, |
| 9334 |
QCA_WLAN_VENDOR_TWT_RESP_DICTATE = 2, |
| 9335 |
QCA_WLAN_VENDOR_TWT_RESP_REJECT = 3, |
| 9336 |
QCA_WLAN_VENDOR_TWT_RESP_ACCEPT = 4, |
| 9337 |
}; |
| 9338 |
|
| 9339 |
/** |
| 9340 |
* enum qca_wlan_vendor_twt_setup_req_type - Required (u8) |
| 9341 |
* Represents the setup type being requested for TWT. |
| 9342 |
* @QCA_WLAN_VENDOR_TWT_SETUP_REQUEST: STA is not specifying all the TWT |
| 9343 |
* parameters but relying on AP to fill the parameters during the negotiation. |
| 9344 |
* @QCA_WLAN_VENDOR_TWT_SETUP_SUGGEST: STA will provide all the suggested |
| 9345 |
* values which the AP may accept or AP may provide alternative parameters |
| 9346 |
* which the STA may accept. |
| 9347 |
* @QCA_WLAN_VENDOR_TWT_SETUP_DEMAND: STA is not willing to accept any |
| 9348 |
* alternate parameters than the requested ones. |
| 9349 |
*/ |
| 9350 |
enum qca_wlan_vendor_twt_setup_req_type { |
| 9351 |
QCA_WLAN_VENDOR_TWT_SETUP_REQUEST = 1, |
| 9352 |
QCA_WLAN_VENDOR_TWT_SETUP_SUGGEST = 2, |
| 9353 |
QCA_WLAN_VENDOR_TWT_SETUP_DEMAND = 3, |
| 9354 |
}; |
| 9355 |
|
| 9356 |
/** |
| 9357 |
* enum qca_wlan_roam_scan_event_type - Type of roam scan event |
| 9358 |
* |
| 9359 |
* Indicates the type of roam scan event sent by firmware/driver. |
| 9360 |
* |
| 9361 |
* @QCA_WLAN_ROAM_SCAN_TRIGGER_EVENT: Roam scan trigger event type. |
| 9362 |
* @QCA_WLAN_ROAM_SCAN_STOP_EVENT: Roam scan stopped event type. |
| 9363 |
*/ |
| 9364 |
enum qca_wlan_roam_scan_event_type { |
| 9365 |
QCA_WLAN_ROAM_SCAN_TRIGGER_EVENT = 0, |
| 9366 |
QCA_WLAN_ROAM_SCAN_STOP_EVENT = 1, |
| 9367 |
}; |
| 9368 |
|
| 9369 |
/** |
| 9370 |
* enum qca_wlan_roam_scan_trigger_reason - Roam scan trigger reason |
| 9371 |
* |
| 9372 |
* Indicates the reason for triggering roam scan by firmware/driver. |
| 9373 |
* |
| 9374 |
* @QCA_WLAN_ROAM_SCAN_TRIGGER_REASON_LOW_RSSI: Due to low RSSI of current AP. |
| 9375 |
* @QCA_WLAN_ROAM_SCAN_TRIGGER_REASON_HIGH_PER: Due to high packet error rate. |
| 9376 |
*/ |
| 9377 |
enum qca_wlan_roam_scan_trigger_reason { |
| 9378 |
QCA_WLAN_ROAM_SCAN_TRIGGER_REASON_LOW_RSSI = 0, |
| 9379 |
QCA_WLAN_ROAM_SCAN_TRIGGER_REASON_HIGH_PER = 1, |
| 9380 |
}; |
| 9381 |
|
| 9382 |
/** |
| 9383 |
* enum qca_wlan_vendor_attr_roam_scan - Vendor subcmd attributes to report |
| 9384 |
* roam scan related details from driver/firmware to user space. enum values |
| 9385 |
* are used for NL attributes sent with |
| 9386 |
* %QCA_NL80211_VENDOR_SUBCMD_ROAM_SCAN_EVENT sub command. |
| 9387 |
*/ |
| 9388 |
enum qca_wlan_vendor_attr_roam_scan { |
| 9389 |
QCA_WLAN_VENDOR_ATTR_ROAM_SCAN_INVALID = 0, |
| 9390 |
/* Encapsulates type of roam scan event being reported. enum |
| 9391 |
* qca_wlan_roam_scan_event_type describes the possible range of |
| 9392 |
* values. u32 attribute. |
| 9393 |
*/ |
| 9394 |
QCA_WLAN_VENDOR_ATTR_ROAM_SCAN_EVENT_TYPE = 1, |
| 9395 |
/* Encapsulates reason for triggering roam scan. enum |
| 9396 |
* qca_wlan_roam_scan_trigger_reason describes the possible range of |
| 9397 |
* values. u32 attribute. |
| 9398 |
*/ |
| 9399 |
QCA_WLAN_VENDOR_ATTR_ROAM_SCAN_TRIGGER_REASON = 2, |
| 9400 |
|
| 9401 |
/* keep last */ |
| 9402 |
QCA_WLAN_VENDOR_ATTR_ROAM_SCAN_AFTER_LAST, |
| 9403 |
QCA_WLAN_VENDOR_ATTR_ROAM_SCAN_MAX = |
| 9404 |
QCA_WLAN_VENDOR_ATTR_ROAM_SCAN_AFTER_LAST - 1, |
| 9405 |
}; |
| 9406 |
|
| 9407 |
/** |
| 9408 |
* enum qca_wlan_vendor_cfr_data_transport_modes - Defines QCA vendor CFR data |
| 9409 |
* transport modes and is used by the attribute |
| 9410 |
* QCA_WLAN_VENDOR_ATTR_PEER_CFR_DATA_TRANSPORT_MODE as a part of the vendor |
| 9411 |
* command QCA_NL80211_VENDOR_SUBCMD_PEER_CFR_CAPTURE_CFG. |
| 9412 |
* @QCA_WLAN_VENDOR_CFR_DATA_RELAY_FS: Use relayfs to send CFR data. |
| 9413 |
* @QCA_WLAN_VENDOR_CFR_DATA_NETLINK_EVENTS: Use netlink events to send CFR |
| 9414 |
* data. The data shall be encapsulated within |
| 9415 |
* QCA_WLAN_VENDOR_ATTR_PEER_CFR_RESP_DATA along with the vendor sub command |
| 9416 |
* QCA_NL80211_VENDOR_SUBCMD_PEER_CFR_CAPTURE_CFG as an asynchronous event. |
| 9417 |
*/ |
| 9418 |
enum qca_wlan_vendor_cfr_data_transport_modes { |
| 9419 |
QCA_WLAN_VENDOR_CFR_DATA_RELAY_FS = 0, |
| 9420 |
QCA_WLAN_VENDOR_CFR_DATA_NETLINK_EVENTS = 1, |
| 9421 |
}; |
| 9422 |
|
| 9423 |
/** |
| 9424 |
* enum qca_wlan_vendor_cfr_method - QCA vendor CFR methods used by |
| 9425 |
* attribute QCA_WLAN_VENDOR_ATTR_PEER_CFR_METHOD as part of vendor |
| 9426 |
* command QCA_NL80211_VENDOR_SUBCMD_PEER_CFR_CAPTURE_CFG. |
| 9427 |
* @QCA_WLAN_VENDOR_CFR_METHOD_QOS_NULL: CFR method using QoS Null frame |
| 9428 |
* @QCA_WLAN_VENDOR_CFR_QOS_NULL_WITH_PHASE: CFR method using QoS Null frame |
| 9429 |
* with phase |
| 9430 |
* @QCA_WLAN_VENDOR_CFR_PROBE_RESPONSE: CFR method using Probe Response frame |
| 9431 |
*/ |
| 9432 |
enum qca_wlan_vendor_cfr_method { |
| 9433 |
QCA_WLAN_VENDOR_CFR_METHOD_QOS_NULL = 0, |
| 9434 |
QCA_WLAN_VENDOR_CFR_QOS_NULL_WITH_PHASE = 1, |
| 9435 |
QCA_WLAN_VENDOR_CFR_PROBE_RESPONSE = 2, |
| 9436 |
}; |
| 9437 |
|
| 9438 |
/** |
| 9439 |
* enum qca_wlan_vendor_cfr_capture_type - QCA vendor CFR capture type used by |
| 9440 |
* attribute QCA_WLAN_VENDOR_ATTR_PEER_CFR_CAPTURE_TYPE. |
| 9441 |
* @QCA_WLAN_VENDOR_CFR_DIRECT_FTM: Filter directed FTM ACK frames. |
| 9442 |
* @QCA_WLAN_VENDOR_CFR_ALL_FTM_ACK: Filter all FTM ACK frames. |
| 9443 |
* @QCA_WLAN_VENDOR_CFR_DIRECT_NDPA_NDP: Filter NDPA NDP directed frames. |
| 9444 |
* @QCA_WLAN_VENDOR_CFR_TA_RA: Filter frames based on TA/RA/Subtype which |
| 9445 |
* is provided by one or more of below attributes: |
| 9446 |
* %QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_TA |
| 9447 |
* %QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_RA |
| 9448 |
* %QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_TA_MASK |
| 9449 |
* %QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_RA_MASK |
| 9450 |
* %QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_MGMT_FILTER |
| 9451 |
* %QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_CTRL_FILTER |
| 9452 |
* %QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_DATA_FILTER |
| 9453 |
* @QCA_WLAN_CFR_ALL_PACKET: Filter all packets. |
| 9454 |
* @QCA_WLAN_VENDOR_CFR_NDPA_NDP_ALL: Filter all NDPA NDP frames. |
| 9455 |
*/ |
| 9456 |
enum qca_wlan_vendor_cfr_capture_type { |
| 9457 |
QCA_WLAN_VENDOR_CFR_DIRECT_FTM = 0, |
| 9458 |
QCA_WLAN_VENDOR_CFR_ALL_FTM_ACK = 1, |
| 9459 |
QCA_WLAN_VENDOR_CFR_DIRECT_NDPA_NDP = 2, |
| 9460 |
QCA_WLAN_VENDOR_CFR_TA_RA = 3, |
| 9461 |
QCA_WLAN_VENDOR_CFR_ALL_PACKET = 4, |
| 9462 |
QCA_WLAN_VENDOR_CFR_NDPA_NDP_ALL = 5, |
| 9463 |
}; |
| 9464 |
|
| 9465 |
/** |
| 9466 |
* enum qca_wlan_vendor_peer_cfr_capture_attr - Used by the vendor command |
| 9467 |
* QCA_NL80211_VENDOR_SUBCMD_PEER_CFR_CAPTURE_CFG to configure peer |
| 9468 |
* Channel Frequency Response capture parameters and enable periodic CFR |
| 9469 |
* capture. |
| 9470 |
* |
| 9471 |
* @QCA_WLAN_VENDOR_ATTR_CFR_PEER_MAC_ADDR: Optional (6-byte MAC address) |
| 9472 |
* MAC address of peer. This is for CFR version 1 only. |
| 9473 |
* |
| 9474 |
* @QCA_WLAN_VENDOR_ATTR_PEER_CFR_ENABLE: Required (flag) |
| 9475 |
* Enable peer CFR capture. This attribute is mandatory to enable peer CFR |
| 9476 |
* capture. If this attribute is not present, peer CFR capture is disabled. |
| 9477 |
* |
| 9478 |
* @QCA_WLAN_VENDOR_ATTR_PEER_CFR_BANDWIDTH: Optional (u8) |
| 9479 |
* BW of measurement, attribute uses the values in enum nl80211_chan_width |
| 9480 |
* Supported values: 20, 40, 80, 80+80, 160. |
| 9481 |
* Note that all targets may not support all bandwidths. |
| 9482 |
* This attribute is mandatory for version 1 if attribute |
| 9483 |
* QCA_WLAN_VENDOR_ATTR_PEER_CFR_ENABLE is used. |
| 9484 |
* |
| 9485 |
* @QCA_WLAN_VENDOR_ATTR_PEER_CFR_PERIODICITY: Optional (u32) |
| 9486 |
* Periodicity of CFR measurement in milliseconds. |
| 9487 |
* Periodicity should be a multiple of Base timer. |
| 9488 |
* Current Base timer value supported is 10 milliseconds (default). |
| 9489 |
* 0 for one shot capture. |
| 9490 |
* This attribute is mandatory for version 1 if attribute |
| 9491 |
* QCA_WLAN_VENDOR_ATTR_PEER_CFR_ENABLE is used. |
| 9492 |
* |
| 9493 |
* @QCA_WLAN_VENDOR_ATTR_PEER_CFR_METHOD: Optional (u8) |
| 9494 |
* Method used to capture Channel Frequency Response. |
| 9495 |
* Attribute uses the values defined in enum qca_wlan_vendor_cfr_method. |
| 9496 |
* This attribute is mandatory for version 1 if attribute |
| 9497 |
* QCA_WLAN_VENDOR_ATTR_PEER_CFR_ENABLE is used. |
| 9498 |
* |
| 9499 |
* @QCA_WLAN_VENDOR_ATTR_PERIODIC_CFR_CAPTURE_ENABLE: Optional (flag) |
| 9500 |
* Enable periodic CFR capture. |
| 9501 |
* This attribute is mandatory for version 1 to enable Periodic CFR capture. |
| 9502 |
* If this attribute is not present, periodic CFR capture is disabled. |
| 9503 |
* |
| 9504 |
* @QCA_WLAN_VENDOR_ATTR_PEER_CFR_VERSION: Optional (u8) |
| 9505 |
* Value is 1 or 2 since there are two versions of CFR capture. Two versions |
| 9506 |
* can't be enabled at same time. This attribute is mandatory if target |
| 9507 |
* support both versions and use one of them. |
| 9508 |
* |
| 9509 |
* @QCA_WLAN_VENDOR_ATTR_PEER_CFR_ENABLE_GROUP_BITMAP: Optional (u32) |
| 9510 |
* This attribute is mandatory for version 2 if |
| 9511 |
* QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_ENTRY is used. |
| 9512 |
* Bits 15:0 bitfield indicates which group is to be enabled. |
| 9513 |
* Bits 31:16 Reserved for future use. |
| 9514 |
* |
| 9515 |
* @QCA_WLAN_VENDOR_ATTR_PEER_CFR_DURATION: Optional (u32) |
| 9516 |
* CFR capture duration in microsecond. This attribute is mandatory for |
| 9517 |
* version 2 if attribute QCA_WLAN_VENDOR_ATTR_PEER_CFR_INTERVAL is used. |
| 9518 |
* |
| 9519 |
* @QCA_WLAN_VENDOR_ATTR_PEER_CFR_INTERVAL: Optional (u32) |
| 9520 |
* CFR capture interval in microsecond. This attribute is mandatory for |
| 9521 |
* version 2 if attribute QCA_WLAN_VENDOR_ATTR_PEER_CFR_DURATION is used. |
| 9522 |
* |
| 9523 |
* @QCA_WLAN_VENDOR_ATTR_PEER_CFR_CAPTURE_TYPE: Optional (u32) |
| 9524 |
* CFR capture type is defined in enum qca_wlan_vendor_cfr_capture_type. |
| 9525 |
* This attribute is mandatory for version 2. |
| 9526 |
* |
| 9527 |
* @QCA_WLAN_VENDOR_ATTR_PEER_CFR_UL_MU_MASK: Optional (u64) |
| 9528 |
* Bitfield indicating which user in the current UL MU transmissions are |
| 9529 |
* enabled for CFR capture. Bits 36 to 0 indicate user indexes for 37 users in |
| 9530 |
* a UL MU transmission. If bit 0 is set, the CFR capture will happen for user |
| 9531 |
* index 0 in the current UL MU transmission. If bits 0 and 2 are set, CFR |
| 9532 |
* capture for UL MU TX corresponds to user indices 0 and 2. Bits 63:37 are |
| 9533 |
* reserved for future use. This is for CFR version 2 only. |
| 9534 |
* |
| 9535 |
* @QCA_WLAN_VENDOR_ATTR_PEER_CFR_FREEZE_TLV_DELAY_COUNT: Optional (u32) |
| 9536 |
* Indicates the number of consecutive RX frames to be skipped before CFR |
| 9537 |
* capture is enabled again. This is for CFR version 2 only. |
| 9538 |
* |
| 9539 |
* @QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_TABLE: Nested attribute containing |
| 9540 |
* one or more %QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_ENTRY attributes. |
| 9541 |
* |
| 9542 |
* @QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_ENTRY: Nested attribute containing |
| 9543 |
* the following group attributes: |
| 9544 |
* %QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_NUMBER, |
| 9545 |
* %QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_TA, |
| 9546 |
* %QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_RA, |
| 9547 |
* %QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_TA_MASK, |
| 9548 |
* %QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_RA_MASK, |
| 9549 |
* %QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_NSS, |
| 9550 |
* %QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_BW, |
| 9551 |
* %QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_MGMT_FILTER, |
| 9552 |
* %QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_CTRL_FILTER, |
| 9553 |
* %QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_DATA_FILTER |
| 9554 |
* |
| 9555 |
* @QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_NUMBER: Optional (u32) |
| 9556 |
* Target supports multiple groups for some configurations. The group number |
| 9557 |
* can be any value between 0 and 15. This is for CFR version 2 only. |
| 9558 |
* |
| 9559 |
* @QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_TA: Optional (6-byte MAC address) |
| 9560 |
* Transmitter address which is used to filter frames. This MAC address takes |
| 9561 |
* effect with QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_TA_MASK. This is for CFR |
| 9562 |
* version 2 only. |
| 9563 |
* |
| 9564 |
* @QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_RA: Optional (6-byte MAC address) |
| 9565 |
* Receiver address which is used to filter frames. This MAC address takes |
| 9566 |
* effect with QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_RA_MASK. This is for CFR |
| 9567 |
* version 2 only. |
| 9568 |
* |
| 9569 |
* @QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_TA_MASK: Optional (6-byte MAC address) |
| 9570 |
* Mask of transmitter address which is used to filter frames. This is for CFR |
| 9571 |
* version 2 only. |
| 9572 |
* |
| 9573 |
* @QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_RA_MASK: Optional (6-byte MAC address) |
| 9574 |
* Mask of receiver address which is used to filter frames. This is for CFR |
| 9575 |
* version 2 only. |
| 9576 |
* |
| 9577 |
* @QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_NSS: Optional (u32) |
| 9578 |
* Indicates frames with a specific NSS will be filtered for CFR capture. |
| 9579 |
* This is for CFR version 2 only. This is a bitmask. Bits 7:0 request CFR |
| 9580 |
* capture to be done for frames matching the NSS specified within this bitmask. |
| 9581 |
* Bits 31:8 are reserved for future use. Bits 7:0 map to NSS: |
| 9582 |
* bit 0 : NSS 1 |
| 9583 |
* bit 1 : NSS 2 |
| 9584 |
* ... |
| 9585 |
* bit 7 : NSS 8 |
| 9586 |
* |
| 9587 |
* @QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_BW: Optional (u32) |
| 9588 |
* Indicates frames with a specific bandwidth will be filtered for CFR capture. |
| 9589 |
* This is for CFR version 2 only. This is a bitmask. Bits 4:0 request CFR |
| 9590 |
* capture to be done for frames matching the bandwidths specified within this |
| 9591 |
* bitmask. Bits 31:5 are reserved for future use. Bits 4:0 map to bandwidth |
| 9592 |
* numerated in enum nl80211_band (although not all bands may be supported |
| 9593 |
* by a given device). |
| 9594 |
* |
| 9595 |
* @QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_MGMT_FILTER: Optional (u32) |
| 9596 |
* Management frames matching the subtype filter categories will be filtered in |
| 9597 |
* by MAC for CFR capture. This is a bitmask in which each bit represents the |
| 9598 |
* corresponding Management frame subtype value per IEEE Std 802.11-2016, |
| 9599 |
* 9.2.4.1.3 Type and Subtype subfields. For example, Beacon frame control type |
| 9600 |
* is 8 and its value is 1 << 8 = 0x100. This is for CFR version 2 only. |
| 9601 |
* |
| 9602 |
* @QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_CTRL_FILTER: Optional (u32) |
| 9603 |
* Control frames matching the subtype filter categories will be filtered in by |
| 9604 |
* MAC for CFR capture. This is a bitmask in which each bit represents the |
| 9605 |
* corresponding Control frame subtype value per IEEE Std 802.11-2016, |
| 9606 |
* 9.2.4.1.3 Type and Subtype subfields. This is for CFR version 2 only. |
| 9607 |
* |
| 9608 |
* @QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_DATA_FILTER: Optional (u32) |
| 9609 |
* Data frames matching the subtype filter categories will be filtered in by |
| 9610 |
* MAC for CFR capture. This is a bitmask in which each bit represents the |
| 9611 |
* corresponding Data frame subtype value per IEEE Std 802.11-2016, |
| 9612 |
* 9.2.4.1.3 Type and Subtype subfields. This is for CFR version 2 only. |
| 9613 |
* |
| 9614 |
* @QCA_WLAN_VENDOR_ATTR_PEER_CFR_DATA_TRANSPORT_MODE: Optional (u8) |
| 9615 |
* Userspace can use this attribute to specify the driver about which transport |
| 9616 |
* mode shall be used by the driver to send CFR data to userspace. Uses values |
| 9617 |
* from enum qca_wlan_vendor_cfr_data_transport_modes. When this attribute is |
| 9618 |
* not present, the driver shall use the default transport mechanism which is |
| 9619 |
* QCA_WLAN_VENDOR_CFR_DATA_RELAY_FS. |
| 9620 |
* |
| 9621 |
* @QCA_WLAN_VENDOR_ATTR_PEER_CFR_DATA_RECEIVER_PID: Optional (u32) |
| 9622 |
* Userspace can use this attribute to specify the nl port id of the application |
| 9623 |
* which receives the CFR data and processes it further so that the drivers can |
| 9624 |
* unicast the netlink events to a specific application. Optionally included |
| 9625 |
* when QCA_WLAN_VENDOR_ATTR_PEER_CFR_DATA_TRANSPORT_MODE is set to |
| 9626 |
* QCA_WLAN_VENDOR_CFR_DATA_NETLINK_EVENTS, not required otherwise. The drivers |
| 9627 |
* shall multicast the netlink events when this attribute is not included. |
| 9628 |
* |
| 9629 |
* @QCA_WLAN_VENDOR_ATTR_PEER_CFR_RESP_DATA: Required (NLA_BINARY). |
| 9630 |
* This attribute will be used by the driver to encapsulate and send CFR data |
| 9631 |
* to userspace along with QCA_NL80211_VENDOR_SUBCMD_PEER_CFR_CAPTURE_CFG as an |
| 9632 |
* asynchronous event when the driver is configured to send CFR data using |
| 9633 |
* netlink events with %QCA_WLAN_VENDOR_CFR_DATA_NETLINK_EVENTS. |
| 9634 |
*/ |
| 9635 |
enum qca_wlan_vendor_peer_cfr_capture_attr { |
| 9636 |
QCA_WLAN_VENDOR_ATTR_PEER_CFR_CAPTURE_INVALID = 0, |
| 9637 |
QCA_WLAN_VENDOR_ATTR_CFR_PEER_MAC_ADDR = 1, |
| 9638 |
QCA_WLAN_VENDOR_ATTR_PEER_CFR_ENABLE = 2, |
| 9639 |
QCA_WLAN_VENDOR_ATTR_PEER_CFR_BANDWIDTH = 3, |
| 9640 |
QCA_WLAN_VENDOR_ATTR_PEER_CFR_PERIODICITY = 4, |
| 9641 |
QCA_WLAN_VENDOR_ATTR_PEER_CFR_METHOD = 5, |
| 9642 |
QCA_WLAN_VENDOR_ATTR_PERIODIC_CFR_CAPTURE_ENABLE = 6, |
| 9643 |
QCA_WLAN_VENDOR_ATTR_PEER_CFR_VERSION = 7, |
| 9644 |
QCA_WLAN_VENDOR_ATTR_PEER_CFR_ENABLE_GROUP_BITMAP = 8, |
| 9645 |
QCA_WLAN_VENDOR_ATTR_PEER_CFR_DURATION = 9, |
| 9646 |
QCA_WLAN_VENDOR_ATTR_PEER_CFR_INTERVAL = 10, |
| 9647 |
QCA_WLAN_VENDOR_ATTR_PEER_CFR_CAPTURE_TYPE = 11, |
| 9648 |
QCA_WLAN_VENDOR_ATTR_PEER_CFR_UL_MU_MASK = 12, |
| 9649 |
QCA_WLAN_VENDOR_ATTR_PEER_CFR_FREEZE_TLV_DELAY_COUNT = 13, |
| 9650 |
QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_TABLE = 14, |
| 9651 |
QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_ENTRY = 15, |
| 9652 |
QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_NUMBER = 16, |
| 9653 |
QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_TA = 17, |
| 9654 |
QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_RA = 18, |
| 9655 |
QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_TA_MASK = 19, |
| 9656 |
QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_RA_MASK = 20, |
| 9657 |
QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_NSS = 21, |
| 9658 |
QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_BW = 22, |
| 9659 |
QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_MGMT_FILTER = 23, |
| 9660 |
QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_CTRL_FILTER = 24, |
| 9661 |
QCA_WLAN_VENDOR_ATTR_PEER_CFR_GROUP_DATA_FILTER = 25, |
| 9662 |
QCA_WLAN_VENDOR_ATTR_PEER_CFR_DATA_TRANSPORT_MODE = 26, |
| 9663 |
QCA_WLAN_VENDOR_ATTR_PEER_CFR_DATA_RECEIVER_PID = 27, |
| 9664 |
QCA_WLAN_VENDOR_ATTR_PEER_CFR_RESP_DATA = 28, |
| 9665 |
|
| 9666 |
/* Keep last */ |
| 9667 |
QCA_WLAN_VENDOR_ATTR_PEER_CFR_AFTER_LAST, |
| 9668 |
QCA_WLAN_VENDOR_ATTR_PEER_CFR_MAX = |
| 9669 |
QCA_WLAN_VENDOR_ATTR_PEER_CFR_AFTER_LAST - 1, |
| 9670 |
}; |
| 9671 |
|
| 9672 |
/** |
| 9673 |
* enum qca_wlan_throughput_level - Current throughput level |
| 9674 |
* |
| 9675 |
* Indicates the current level of throughput calculated by the driver. The |
| 9676 |
* driver may choose different thresholds to decide whether the throughput level |
| 9677 |
* is low or medium or high based on variety of parameters like physical link |
| 9678 |
* capacity of the current connection, the number of packets being dispatched |
| 9679 |
* per second, etc. The throughput level events might not be consistent with the |
| 9680 |
* actual current throughput value being observed. |
| 9681 |
* |
| 9682 |
* @QCA_WLAN_THROUGHPUT_LEVEL_LOW: Low level of throughput |
| 9683 |
* @QCA_WLAN_THROUGHPUT_LEVEL_MEDIUM: Medium level of throughput |
| 9684 |
* @QCA_WLAN_THROUGHPUT_LEVEL_HIGH: High level of throughput |
| 9685 |
*/ |
| 9686 |
enum qca_wlan_throughput_level { |
| 9687 |
QCA_WLAN_THROUGHPUT_LEVEL_LOW = 0, |
| 9688 |
QCA_WLAN_THROUGHPUT_LEVEL_MEDIUM = 1, |
| 9689 |
QCA_WLAN_THROUGHPUT_LEVEL_HIGH = 2, |
| 9690 |
}; |
| 9691 |
|
| 9692 |
/** |
| 9693 |
* enum qca_wlan_vendor_attr_throughput_change - Vendor subcmd attributes to |
| 9694 |
* report throughput changes from the driver to user space. enum values are used |
| 9695 |
* for netlink attributes sent with |
| 9696 |
* %QCA_NL80211_VENDOR_SUBCMD_THROUGHPUT_CHANGE_EVENT sub command. |
| 9697 |
*/ |
| 9698 |
enum qca_wlan_vendor_attr_throughput_change { |
| 9699 |
QCA_WLAN_VENDOR_ATTR_THROUGHPUT_CHANGE_INVALID = 0, |
| 9700 |
/* Indicates the direction of throughput in which the change is being |
| 9701 |
* reported. u8 attribute. Value is 0 for TX and 1 for RX. |
| 9702 |
*/ |
| 9703 |
QCA_WLAN_VENDOR_ATTR_THROUGHPUT_CHANGE_DIRECTION = 1, |
| 9704 |
/* Indicates the newly observed throughput level. enum |
| 9705 |
* qca_wlan_throughput_level describes the possible range of values. |
| 9706 |
* u8 attribute. |
| 9707 |
*/ |
| 9708 |
QCA_WLAN_VENDOR_ATTR_THROUGHPUT_CHANGE_THROUGHPUT_LEVEL = 2, |
| 9709 |
/* Indicates the driver's guidance on the new value to be set to |
| 9710 |
* kernel's TCP parameter tcp_limit_output_bytes. u32 attribute. The |
| 9711 |
* driver may optionally include this attribute. |
| 9712 |
*/ |
| 9713 |
QCA_WLAN_VENDOR_ATTR_THROUGHPUT_CHANGE_TCP_LIMIT_OUTPUT_BYTES = 3, |
| 9714 |
/* Indicates the driver's guidance on the new value to be set to |
| 9715 |
* kernel's TCP parameter tcp_adv_win_scale. s8 attribute. Possible |
| 9716 |
* values are from -31 to 31. The driver may optionally include this |
| 9717 |
* attribute. |
| 9718 |
*/ |
| 9719 |
QCA_WLAN_VENDOR_ATTR_THROUGHPUT_CHANGE_TCP_ADV_WIN_SCALE = 4, |
| 9720 |
/* Indicates the driver's guidance on the new value to be set to |
| 9721 |
* kernel's TCP parameter tcp_delack_seg. u32 attribute. The driver may |
| 9722 |
* optionally include this attribute. |
| 9723 |
*/ |
| 9724 |
QCA_WLAN_VENDOR_ATTR_THROUGHPUT_CHANGE_TCP_DELACK_SEG = 5, |
| 9725 |
|
| 9726 |
/* keep last */ |
| 9727 |
QCA_WLAN_VENDOR_ATTR_THROUGHPUT_CHANGE_AFTER_LAST, |
| 9728 |
QCA_WLAN_VENDOR_ATTR_THROUGHPUT_CHANGE_MAX = |
| 9729 |
QCA_WLAN_VENDOR_ATTR_THROUGHPUT_CHANGE_AFTER_LAST - 1, |
| 9730 |
}; |
| 9731 |
|
| 9732 |
/** |
| 9733 |
* enum qca_coex_config_profiles - This enum defines different types of |
| 9734 |
* traffic streams that can be prioritized one over the other during coex |
| 9735 |
* scenarios. |
| 9736 |
* The types defined in this enum are categorized in the below manner. |
| 9737 |
* 0 - 31 values corresponds to WLAN |
| 9738 |
* 32 - 63 values corresponds to BT |
| 9739 |
* 64 - 95 values corresponds to Zigbee |
| 9740 |
* @QCA_WIFI_STA_DISCOVERY: Prioritize discovery frames for WLAN STA |
| 9741 |
* @QCA_WIFI_STA_CONNECTION: Prioritize connection frames for WLAN STA |
| 9742 |
* @QCA_WIFI_STA_CLASS_3_MGMT: Prioritize class 3 mgmt frames for WLAN STA |
| 9743 |
* @QCA_WIFI_STA_DATA : Prioritize data frames for WLAN STA |
| 9744 |
* @QCA_WIFI_STA_ALL: Priritize all frames for WLAN STA |
| 9745 |
* @QCA_WIFI_SAP_DISCOVERY: Prioritize discovery frames for WLAN SAP |
| 9746 |
* @QCA_WIFI_SAP_CONNECTION: Prioritize connection frames for WLAN SAP |
| 9747 |
* @QCA_WIFI_SAP_CLASS_3_MGMT: Prioritize class 3 mgmt frames for WLAN SAP |
| 9748 |
* @QCA_WIFI_SAP_DATA: Prioritize data frames for WLAN SAP |
| 9749 |
* @QCA_WIFI_SAP_ALL: Prioritize all frames for WLAN SAP |
| 9750 |
* @QCA_BT_A2DP: Prioritize BT A2DP |
| 9751 |
* @QCA_BT_BLE: Prioritize BT BLE |
| 9752 |
* @QCA_BT_SCO: Prioritize BT SCO |
| 9753 |
* @QCA_ZB_LOW: Prioritize Zigbee Low |
| 9754 |
* @QCA_ZB_HIGH: Prioritize Zigbee High |
| 9755 |
*/ |
| 9756 |
enum qca_coex_config_profiles { |
| 9757 |
/* 0 - 31 corresponds to WLAN */ |
| 9758 |
QCA_WIFI_STA_DISCOVERY = 0, |
| 9759 |
QCA_WIFI_STA_CONNECTION = 1, |
| 9760 |
QCA_WIFI_STA_CLASS_3_MGMT = 2, |
| 9761 |
QCA_WIFI_STA_DATA = 3, |
| 9762 |
QCA_WIFI_STA_ALL = 4, |
| 9763 |
QCA_WIFI_SAP_DISCOVERY = 5, |
| 9764 |
QCA_WIFI_SAP_CONNECTION = 6, |
| 9765 |
QCA_WIFI_SAP_CLASS_3_MGMT = 7, |
| 9766 |
QCA_WIFI_SAP_DATA = 8, |
| 9767 |
QCA_WIFI_SAP_ALL = 9, |
| 9768 |
QCA_WIFI_CASE_MAX = 31, |
| 9769 |
/* 32 - 63 corresponds to BT */ |
| 9770 |
QCA_BT_A2DP = 32, |
| 9771 |
QCA_BT_BLE = 33, |
| 9772 |
QCA_BT_SCO = 34, |
| 9773 |
QCA_BT_CASE_MAX = 63, |
| 9774 |
/* 64 - 95 corresponds to Zigbee */ |
| 9775 |
QCA_ZB_LOW = 64, |
| 9776 |
QCA_ZB_HIGH = 65, |
| 9777 |
QCA_ZB_CASE_MAX = 95, |
| 9778 |
/* 0xff is default value if the u8 profile value is not set. */ |
| 9779 |
QCA_COEX_CONFIG_PROFILE_DEFAULT_VALUE = 255 |
| 9780 |
}; |
| 9781 |
|
| 9782 |
/** |
| 9783 |
* enum qca_vendor_attr_coex_config_types - Coex configurations types. |
| 9784 |
* This enum defines the valid set of values of coex configuration types. These |
| 9785 |
* values may used by attribute |
| 9786 |
* %QCA_VENDOR_ATTR_COEX_CONFIG_THREE_WAY_CONFIG_TYPE. |
| 9787 |
* |
| 9788 |
* @QCA_WLAN_VENDOR_ATTR_COEX_CONFIG_THREE_WAY_COEX_RESET: Reset all the |
| 9789 |
* weights to default values. |
| 9790 |
* @QCA_WLAN_VENDOR_ATTR_COEX_CONFIG_THREE_WAY_COEX_START: Start to config |
| 9791 |
* weights with configurability value. |
| 9792 |
*/ |
| 9793 |
enum qca_vendor_attr_coex_config_types { |
| 9794 |
QCA_WLAN_VENDOR_ATTR_COEX_CONFIG_INVALID = 0, |
| 9795 |
QCA_WLAN_VENDOR_ATTR_COEX_CONFIG_THREE_WAY_COEX_RESET = 1, |
| 9796 |
QCA_WLAN_VENDOR_ATTR_COEX_CONFIG_THREE_WAY_COEX_START = 2, |
| 9797 |
}; |
| 9798 |
|
| 9799 |
/** |
| 9800 |
* enum qca_vendor_attr_coex_config - Specifies vendor coex config attributes |
| 9801 |
* |
| 9802 |
* @QCA_VENDOR_ATTR_COEX_CONFIG_PROFILES: This attribute contains variable |
| 9803 |
* length array of 8-bit values from enum qca_coex_config_profiles. |
| 9804 |
* FW will prioritize the profiles in the order given in the array encapsulated |
| 9805 |
* in this attribute. |
| 9806 |
* For example: |
| 9807 |
* ----------------------------------------------------------------------- |
| 9808 |
* | 1 | 34 | 32 | 65 | |
| 9809 |
* ----------------------------------------------------------------------- |
| 9810 |
* If the attribute contains the values defined in above array then it means |
| 9811 |
* 1) Wifi STA connection has priority over BT_SCO, BT_A2DP and ZIGBEE HIGH. |
| 9812 |
* 2) BT_SCO has priority over BT_A2DP. |
| 9813 |
* 3) BT_A2DP has priority over ZIGBEE HIGH. |
| 9814 |
* Profiles which are not listed in this array shall not be preferred over the |
| 9815 |
* profiles which are listed in the array as a part of this attribute. |
| 9816 |
*/ |
| 9817 |
enum qca_vendor_attr_coex_config { |
| 9818 |
QCA_VENDOR_ATTR_COEX_CONFIG_INVALID = 0, |
| 9819 |
QCA_VENDOR_ATTR_COEX_CONFIG_PROFILES = 1, |
| 9820 |
|
| 9821 |
/* Keep last */ |
| 9822 |
QCA_VENDOR_ATTR_COEX_CONFIG_AFTER_LAST, |
| 9823 |
QCA_VENDOR_ATTR_COEX_CONFIG_MAX = |
| 9824 |
QCA_VENDOR_ATTR_COEX_CONFIG_AFTER_LAST - 1, |
| 9825 |
}; |
| 9826 |
|
| 9827 |
/** |
| 9828 |
* enum qca_vendor_attr_coex_config_three_way - Specifies vendor coex config |
| 9829 |
* attributes |
| 9830 |
* Attributes for data used by QCA_NL80211_VENDOR_SUBCMD_COEX_CONFIG |
| 9831 |
* |
| 9832 |
* QCA_VENDOR_ATTR_COEX_CONFIG_THREE_WAY_CONFIG_TYPE: u32 attribute. |
| 9833 |
* Indicate config type. |
| 9834 |
* The config types are 32-bit values from qca_vendor_attr_coex_config_types |
| 9835 |
* |
| 9836 |
* @QCA_VENDOR_ATTR_COEX_CONFIG_THREE_WAY_PRIORITY_1: u32 attribute. |
| 9837 |
* Indicate the Priority 1 profiles. |
| 9838 |
* The profiles are 8-bit values from enum qca_coex_config_profiles. |
| 9839 |
* In same priority level, maximum to 4 profiles can be set here. |
| 9840 |
* @QCA_VENDOR_ATTR_COEX_CONFIG_THREE_WAY_PRIORITY_2: u32 attribute. |
| 9841 |
* Indicate the Priority 2 profiles. |
| 9842 |
* The profiles are 8-bit values from enum qca_coex_config_profiles. |
| 9843 |
* In same priority level, maximum to 4 profiles can be set here. |
| 9844 |
* @QCA_VENDOR_ATTR_COEX_CONFIG_THREE_WAY_PRIORITY_3: u32 attribute. |
| 9845 |
* Indicate the Priority 3 profiles. |
| 9846 |
* The profiles are 8-bit values from enum qca_coex_config_profiles. |
| 9847 |
* In same priority level, maximum to 4 profiles can be set here. |
| 9848 |
* @QCA_VENDOR_ATTR_COEX_CONFIG_THREE_WAY_PRIORITY_4: u32 attribute. |
| 9849 |
* Indicate the Priority 4 profiles. |
| 9850 |
* The profiles are 8-bit values from enum qca_coex_config_profiles. |
| 9851 |
* In same priority level, maximum to 4 profiles can be set here. |
| 9852 |
* NOTE: |
| 9853 |
* Limitations for QCA_VENDOR_ATTR_COEX_CONFIG_THREE_WAY_PRIORITY_x priority |
| 9854 |
* arrangement: |
| 9855 |
* 1: In the same u32 attribute (priority x), the profiles enum values own |
| 9856 |
* same priority level. |
| 9857 |
* 2: 0xff is default value if the u8 profile value is not set. |
| 9858 |
* 3: max to 4 rules/profiles in same priority level. |
| 9859 |
* 4: max to 4 priority level (priority 1 - priority 4) |
| 9860 |
* 5: one priority level only supports one scenario from WLAN/BT/ZB, |
| 9861 |
* hybrid rules not support. |
| 9862 |
* 6: if WMI_COEX_CONFIG_THREE_WAY_COEX_RESET called, priority x will |
| 9863 |
* remain blank to reset all parameters. |
| 9864 |
* For example: |
| 9865 |
* |
| 9866 |
* If the attributes as follow: |
| 9867 |
* priority 1: |
| 9868 |
* ------------------------------------ |
| 9869 |
* | 0xff | 0 | 1 | 2 | |
| 9870 |
* ------------------------------------ |
| 9871 |
* priority 2: |
| 9872 |
* ------------------------------------- |
| 9873 |
* | 0xff | 0xff | 0xff | 32 | |
| 9874 |
* ------------------------------------- |
| 9875 |
* priority 3: |
| 9876 |
* ------------------------------------- |
| 9877 |
* | 0xff | 0xff | 0xff | 65 | |
| 9878 |
* ------------------------------------- |
| 9879 |
* then it means: |
| 9880 |
* 1: WIFI_STA_DISCOVERY, WIFI_STA_CLASS_3_MGMT and WIFI_STA_CONNECTION |
| 9881 |
* owns same priority level. |
| 9882 |
* 2: WIFI_STA_DISCOVERY, WIFI_STA_CLASS_3_MGMT and WIFI_STA_CONNECTION |
| 9883 |
* has priority over BT_A2DP and ZB_HIGH. |
| 9884 |
* 3: BT_A2DP has priority over ZB_HIGH. |
| 9885 |
*/ |
| 9886 |
|
| 9887 |
enum qca_vendor_attr_coex_config_three_way { |
| 9888 |
QCA_VENDOR_ATTR_COEX_CONFIG_THREE_WAY_INVALID = 0, |
| 9889 |
QCA_VENDOR_ATTR_COEX_CONFIG_THREE_WAY_CONFIG_TYPE = 1, |
| 9890 |
QCA_VENDOR_ATTR_COEX_CONFIG_THREE_WAY_PRIORITY_1 = 2, |
| 9891 |
QCA_VENDOR_ATTR_COEX_CONFIG_THREE_WAY_PRIORITY_2 = 3, |
| 9892 |
QCA_VENDOR_ATTR_COEX_CONFIG_THREE_WAY_PRIORITY_3 = 4, |
| 9893 |
QCA_VENDOR_ATTR_COEX_CONFIG_THREE_WAY_PRIORITY_4 = 5, |
| 9894 |
|
| 9895 |
/* Keep last */ |
| 9896 |
QCA_VENDOR_ATTR_COEX_CONFIG_THREE_WAY_AFTER_LAST, |
| 9897 |
QCA_VENDOR_ATTR_COEX_CONFIG_THREE_WAY_MAX = |
| 9898 |
QCA_VENDOR_ATTR_COEX_CONFIG_THREE_WAY_AFTER_LAST - 1, |
| 9899 |
}; |
| 9900 |
|
| 9901 |
/** |
| 9902 |
* enum qca_wlan_vendor_attr_link_properties - Represent the link properties. |
| 9903 |
* |
| 9904 |
* @QCA_WLAN_VENDOR_ATTR_LINK_PROPERTIES_MAC_ADDR: MAC address of the peer |
| 9905 |
* (STA/AP) for the connected link. |
| 9906 |
* @QCA_WLAN_VENDOR_ATTR_LINK_PROPERTIES_STA_FLAGS: Attribute containing a |
| 9907 |
* &struct nl80211_sta_flag_update for the respective connected link. MAC |
| 9908 |
* address of the peer represented by |
| 9909 |
* QCA_WLAN_VENDOR_ATTR_LINK_PROPERTIES_MAC_ADDR. |
| 9910 |
*/ |
| 9911 |
enum qca_wlan_vendor_attr_link_properties { |
| 9912 |
QCA_WLAN_VENDOR_ATTR_LINK_PROPERTIES_INVALID = 0, |
| 9913 |
/* 1 - 3 are reserved */ |
| 9914 |
QCA_WLAN_VENDOR_ATTR_LINK_PROPERTIES_MAC_ADDR = 4, |
| 9915 |
QCA_WLAN_VENDOR_ATTR_LINK_PROPERTIES_STA_FLAGS = 5, |
| 9916 |
|
| 9917 |
/* Keep last */ |
| 9918 |
QCA_VENDOR_ATTR_LINK_PROPERTIES_AFTER_LAST, |
| 9919 |
QCA_VENDOR_ATTR_LINK_PROPERTIES_MAX = |
| 9920 |
QCA_VENDOR_ATTR_LINK_PROPERTIES_AFTER_LAST - 1, |
| 9921 |
}; |
| 9922 |
|
| 9923 |
/** |
| 9924 |
* enum qca_vendor_attr_peer_stats_cache_type - Represents peer stats cache type |
| 9925 |
* This enum defines the valid set of values of peer stats cache types. These |
| 9926 |
* values are used by attribute |
| 9927 |
* %QCA_WLAN_VENDOR_ATTR_PEER_STATS_CACHE_TYPE. |
| 9928 |
* |
| 9929 |
* @QCA_WLAN_VENDOR_ATTR_PEER_TX_RATE_STATS: Represents peer TX rate statistics |
| 9930 |
* @QCA_WLAN_VENDOR_ATTR_PEER_RX_RATE_STATS: Represents peer RX rate statistics |
| 9931 |
* @QCA_WLAN_VENDOR_ATTR_PEER_TX_SOJOURN_STATS: Represents peer TX sojourn |
| 9932 |
* statistics |
| 9933 |
*/ |
| 9934 |
enum qca_vendor_attr_peer_stats_cache_type { |
| 9935 |
QCA_WLAN_VENDOR_ATTR_PEER_STATS_CACHE_TYPE_INVALID = 0, |
| 9936 |
|
| 9937 |
QCA_WLAN_VENDOR_ATTR_PEER_TX_RATE_STATS, |
| 9938 |
QCA_WLAN_VENDOR_ATTR_PEER_RX_RATE_STATS, |
| 9939 |
QCA_WLAN_VENDOR_ATTR_PEER_TX_SOJOURN_STATS, |
| 9940 |
}; |
| 9941 |
|
| 9942 |
/** |
| 9943 |
* enum qca_wlan_vendor_attr_peer_stats_cache_params - This enum defines |
| 9944 |
* attributes required for QCA_NL80211_VENDOR_SUBCMD_PEER_STATS_CACHE_FLUSH |
| 9945 |
* Information in these attributes is used to flush peer rate statistics from |
| 9946 |
* the driver to user application. |
| 9947 |
* |
| 9948 |
* @QCA_WLAN_VENDOR_ATTR_PEER_STATS_CACHE_TYPE: Unsigned 32-bit attribute |
| 9949 |
* Indicate peer statistics cache type. |
| 9950 |
* The statistics types are 32-bit values from |
| 9951 |
* enum qca_vendor_attr_peer_stats_cache_type. |
| 9952 |
* @QCA_WLAN_VENDOR_ATTR_PEER_STATS_CACHE_PEER_MAC: Unsigned 8-bit array |
| 9953 |
* of size 6 octets, representing the peer MAC address. |
| 9954 |
* @QCA_WLAN_VENDOR_ATTR_PEER_STATS_CACHE_DATA: Opaque data attribute |
| 9955 |
* containing buffer of statistics to send to application layer entity. |
| 9956 |
* @QCA_WLAN_VENDOR_ATTR_PEER_STATS_CACHE_PEER_COOKIE: Unsigned 64-bit attribute |
| 9957 |
* representing a cookie for peer unique session. |
| 9958 |
*/ |
| 9959 |
enum qca_wlan_vendor_attr_peer_stats_cache_params { |
| 9960 |
QCA_WLAN_VENDOR_ATTR_PEER_STATS_INVALID = 0, |
| 9961 |
|
| 9962 |
QCA_WLAN_VENDOR_ATTR_PEER_STATS_CACHE_TYPE = 1, |
| 9963 |
QCA_WLAN_VENDOR_ATTR_PEER_STATS_CACHE_PEER_MAC = 2, |
| 9964 |
QCA_WLAN_VENDOR_ATTR_PEER_STATS_CACHE_DATA = 3, |
| 9965 |
QCA_WLAN_VENDOR_ATTR_PEER_STATS_CACHE_PEER_COOKIE = 4, |
| 9966 |
|
| 9967 |
/* Keep last */ |
| 9968 |
QCA_WLAN_VENDOR_ATTR_PEER_STATS_CACHE_LAST, |
| 9969 |
QCA_WLAN_VENDOR_ATTR_PEER_STATS_CACHE_MAX = |
| 9970 |
QCA_WLAN_VENDOR_ATTR_PEER_STATS_CACHE_LAST - 1 |
| 9971 |
}; |
| 9972 |
|
| 9973 |
/** |
| 9974 |
* enum qca_mpta_helper_attr_zigbee_state - Current Zigbee state |
| 9975 |
* This enum defines all the possible states of Zigbee, which can be |
| 9976 |
* delivered in the QCA_MPTA_HELPER_VENDOR_ATTR_ZIGBEE_STATE attribute. |
| 9977 |
* |
| 9978 |
* @ZIGBEE_IDLE: Zigbee in idle state |
| 9979 |
* @ZIGBEE_FORM_NETWORK: Zigbee forming network |
| 9980 |
* @ZIGBEE_WAIT_JOIN: Zigbee waiting for joining network |
| 9981 |
* @ZIGBEE_JOIN: Zigbee joining network |
| 9982 |
* @ZIGBEE_NETWORK_UP: Zigbee network is up |
| 9983 |
* @ZIGBEE_HMI: Zigbee in HMI mode |
| 9984 |
*/ |
| 9985 |
enum qca_mpta_helper_attr_zigbee_state { |
| 9986 |
ZIGBEE_IDLE = 0, |
| 9987 |
ZIGBEE_FORM_NETWORK = 1, |
| 9988 |
ZIGBEE_WAIT_JOIN = 2, |
| 9989 |
ZIGBEE_JOIN = 3, |
| 9990 |
ZIGBEE_NETWORK_UP = 4, |
| 9991 |
ZIGBEE_HMI = 5, |
| 9992 |
}; |
| 9993 |
|
| 9994 |
/* |
| 9995 |
* enum qca_mpta_helper_vendor_attr - Attributes used in vendor sub-command |
| 9996 |
* QCA_NL80211_VENDOR_SUBCMD_MPTA_HELPER_CONFIG. |
| 9997 |
*/ |
| 9998 |
enum qca_mpta_helper_vendor_attr { |
| 9999 |
QCA_MPTA_HELPER_VENDOR_ATTR_INVALID = 0, |
| 10000 |
/* Optional attribute used to update Zigbee state. |
| 10001 |
* enum qca_mpta_helper_attr_zigbee_state. |
| 10002 |
* NLA_U32 attribute. |
| 10003 |
*/ |
| 10004 |
QCA_MPTA_HELPER_VENDOR_ATTR_ZIGBEE_STATE = 1, |
| 10005 |
/* Optional attribute used to configure WLAN duration for Shape-OCS |
| 10006 |
* during interrupt. |
| 10007 |
* Set in pair with QCA_MPTA_HELPER_VENDOR_ATTR_INT_NON_WLAN_DURATION. |
| 10008 |
* Value range 0 ~ 300 (ms). |
| 10009 |
* NLA_U32 attribute. |
| 10010 |
*/ |
| 10011 |
QCA_MPTA_HELPER_VENDOR_ATTR_INT_WLAN_DURATION = 2, |
| 10012 |
/* Optional attribute used to configure non-WLAN duration for Shape-OCS |
| 10013 |
* during interrupt. |
| 10014 |
* Set in pair with QCA_MPTA_HELPER_VENDOR_ATTR_INT_WLAN_DURATION. |
| 10015 |
* Value range 0 ~ 300 (ms). |
| 10016 |
* NLA_U32 attribute. |
| 10017 |
*/ |
| 10018 |
QCA_MPTA_HELPER_VENDOR_ATTR_INT_NON_WLAN_DURATION = 3, |
| 10019 |
/* Optional attribute used to configure WLAN duration for Shape-OCS |
| 10020 |
* monitor period. |
| 10021 |
* Set in pair with QCA_MPTA_HELPER_VENDOR_ATTR_MON_NON_WLAN_DURATION. |
| 10022 |
* Value range 0 ~ 300 (ms) |
| 10023 |
* NLA_U32 attribute |
| 10024 |
*/ |
| 10025 |
QCA_MPTA_HELPER_VENDOR_ATTR_MON_WLAN_DURATION = 4, |
| 10026 |
/* Optional attribute used to configure non-WLAN duration for Shape-OCS |
| 10027 |
* monitor period. |
| 10028 |
* Set in pair with QCA_MPTA_HELPER_VENDOR_ATTR_MON_WLAN_DURATION. |
| 10029 |
* Value range 0 ~ 300 (ms) |
| 10030 |
* NLA_U32 attribute |
| 10031 |
*/ |
| 10032 |
QCA_MPTA_HELPER_VENDOR_ATTR_MON_NON_WLAN_DURATION = 5, |
| 10033 |
/* Optional attribute used to configure OCS interrupt duration. |
| 10034 |
* Set in pair with QCA_MPTA_HELPER_VENDOR_ATTR_MON_OCS_DURATION. |
| 10035 |
* Value range 1000 ~ 20000 (ms) |
| 10036 |
* NLA_U32 attribute |
| 10037 |
*/ |
| 10038 |
QCA_MPTA_HELPER_VENDOR_ATTR_INT_OCS_DURATION = 6, |
| 10039 |
/* Optional attribute used to configure OCS monitor duration. |
| 10040 |
* Set in pair with QCA_MPTA_HELPER_VENDOR_ATTR_INT_OCS_DURATION. |
| 10041 |
* Value range 1000 ~ 20000 (ms) |
| 10042 |
* NLA_U32 attribute |
| 10043 |
*/ |
| 10044 |
QCA_MPTA_HELPER_VENDOR_ATTR_MON_OCS_DURATION = 7, |
| 10045 |
/* Optional attribute used to notify WLAN firmware the current Zigbee |
| 10046 |
* channel. |
| 10047 |
* Value range 11 ~ 26 |
| 10048 |
* NLA_U32 attribute |
| 10049 |
*/ |
| 10050 |
QCA_MPTA_HELPER_VENDOR_ATTR_ZIGBEE_CHAN = 8, |
| 10051 |
/* Optional attribute used to configure WLAN mute duration. |
| 10052 |
* Value range 0 ~ 400 (ms) |
| 10053 |
* NLA_U32 attribute |
| 10054 |
*/ |
| 10055 |
QCA_MPTA_HELPER_VENDOR_ATTR_WLAN_MUTE_DURATION = 9, |
| 10056 |
|
| 10057 |
/* keep last */ |
| 10058 |
QCA_MPTA_HELPER_VENDOR_ATTR_AFTER_LAST, |
| 10059 |
QCA_MPTA_HELPER_VENDOR_ATTR_MAX = |
| 10060 |
QCA_MPTA_HELPER_VENDOR_ATTR_AFTER_LAST - 1 |
| 10061 |
}; |
| 10062 |
|
| 10063 |
/** |
| 10064 |
* enum qca_wlan_vendor_beacon_reporting_op_types - Defines different types of |
| 10065 |
* operations for which %QCA_NL80211_VENDOR_SUBCMD_BEACON_REPORTING can be used. |
| 10066 |
* Will be used by %QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_OP_TYPE. |
| 10067 |
* |
| 10068 |
* @QCA_WLAN_VENDOR_BEACON_REPORTING_OP_START: Sent by userspace to the driver |
| 10069 |
* to request the driver to start reporting Beacon frames. |
| 10070 |
* @QCA_WLAN_VENDOR_BEACON_REPORTING_OP_STOP: Sent by userspace to the driver to |
| 10071 |
* request the driver to stop reporting Beacon frames. |
| 10072 |
* @QCA_WLAN_VENDOR_BEACON_REPORTING_OP_BEACON_INFO: Sent by the driver to |
| 10073 |
* userspace to report received Beacon frames. |
| 10074 |
* @QCA_WLAN_VENDOR_BEACON_REPORTING_OP_PAUSE: Sent by the driver to userspace |
| 10075 |
* to indicate that the driver is going to pause reporting Beacon frames. |
| 10076 |
*/ |
| 10077 |
enum qca_wlan_vendor_beacon_reporting_op_types { |
| 10078 |
QCA_WLAN_VENDOR_BEACON_REPORTING_OP_START = 0, |
| 10079 |
QCA_WLAN_VENDOR_BEACON_REPORTING_OP_STOP = 1, |
| 10080 |
QCA_WLAN_VENDOR_BEACON_REPORTING_OP_BEACON_INFO = 2, |
| 10081 |
QCA_WLAN_VENDOR_BEACON_REPORTING_OP_PAUSE = 3, |
| 10082 |
}; |
| 10083 |
|
| 10084 |
/** |
| 10085 |
* enum qca_wlan_vendor_beacon_reporting_pause_reasons - Defines different types |
| 10086 |
* of reasons for which the driver is pausing reporting Beacon frames. Will be |
| 10087 |
* used by %QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_PAUSE_REASON. |
| 10088 |
* |
| 10089 |
* @QCA_WLAN_VENDOR_BEACON_REPORTING_PAUSE_REASON_UNSPECIFIED: For unspecified |
| 10090 |
* reasons. |
| 10091 |
* @QCA_WLAN_VENDOR_BEACON_REPORTING_PAUSE_REASON_SCAN_STARTED: When the |
| 10092 |
* driver/firmware is starting a scan. |
| 10093 |
* @QCA_WLAN_VENDOR_BEACON_REPORTING_PAUSE_REASON_DISCONNECTED: When the |
| 10094 |
* driver/firmware disconnects from the ESS and indicates the disconnection to |
| 10095 |
* userspace (non-seamless roaming case). This reason code will be used by the |
| 10096 |
* driver/firmware to indicate stopping of beacon report events. Userspace will |
| 10097 |
* need to start beacon reporting again (if desired) by sending vendor command |
| 10098 |
* QCA_NL80211_VENDOR_SUBCMD_BEACON_REPORTING with |
| 10099 |
* QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_OP_TYPE set to |
| 10100 |
* QCA_WLAN_VENDOR_BEACON_REPORTING_OP_START after the next connection is |
| 10101 |
* completed. |
| 10102 |
*/ |
| 10103 |
enum qca_wlan_vendor_beacon_reporting_pause_reasons { |
| 10104 |
QCA_WLAN_VENDOR_BEACON_REPORTING_PAUSE_REASON_UNSPECIFIED = 0, |
| 10105 |
QCA_WLAN_VENDOR_BEACON_REPORTING_PAUSE_REASON_SCAN_STARTED = 1, |
| 10106 |
QCA_WLAN_VENDOR_BEACON_REPORTING_PAUSE_REASON_DISCONNECTED = 2, |
| 10107 |
}; |
| 10108 |
|
| 10109 |
/* |
| 10110 |
* enum qca_wlan_vendor_attr_beacon_reporting_params - List of attributes used |
| 10111 |
* in vendor sub-command QCA_NL80211_VENDOR_SUBCMD_BEACON_REPORTING. |
| 10112 |
*/ |
| 10113 |
enum qca_wlan_vendor_attr_beacon_reporting_params { |
| 10114 |
QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_INVALID = 0, |
| 10115 |
/* Specifies the type of operation that the vendor command/event is |
| 10116 |
* intended for. Possible values for this attribute are defined in |
| 10117 |
* enum qca_wlan_vendor_beacon_reporting_op_types. u32 attribute. |
| 10118 |
*/ |
| 10119 |
QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_OP_TYPE = 1, |
| 10120 |
/* Optionally set by userspace to request the driver to report Beacon |
| 10121 |
* frames using asynchronous vendor events when the |
| 10122 |
* QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_OP_TYPE is set to |
| 10123 |
* QCA_WLAN_VENDOR_BEACON_REPORTING_OP_START. NLA_FLAG attribute. |
| 10124 |
* If this flag is not set, the driver will only update Beacon frames in |
| 10125 |
* cfg80211 scan cache but not send any vendor events. |
| 10126 |
*/ |
| 10127 |
QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_ACTIVE_REPORTING = 2, |
| 10128 |
/* Optionally used by userspace to request the driver/firmware to report |
| 10129 |
* Beacon frames periodically when the |
| 10130 |
* QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_OP_TYPE is set to |
| 10131 |
* QCA_WLAN_VENDOR_BEACON_REPORTING_OP_START. |
| 10132 |
* u32 attribute, indicates the period of Beacon frames to be reported |
| 10133 |
* and in the units of beacon interval. |
| 10134 |
* If this attribute is missing in the command, then the default value |
| 10135 |
* of 1 will be assumed by driver, i.e., to report every Beacon frame. |
| 10136 |
* Zero is an invalid value. |
| 10137 |
* If a valid value is received for this attribute, the driver will |
| 10138 |
* update the cfg80211 scan cache periodically as per the value received |
| 10139 |
* in this attribute in addition to updating the cfg80211 scan cache |
| 10140 |
* when there is significant change in Beacon frame IEs. |
| 10141 |
*/ |
| 10142 |
QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_PERIOD = 3, |
| 10143 |
/* Used by the driver to encapsulate the SSID when the |
| 10144 |
* QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_OP_TYPE is set to |
| 10145 |
* QCA_WLAN_VENDOR_BEACON_REPORTING_OP_BEACON_INFO. |
| 10146 |
* u8 array with a maximum size of 32. |
| 10147 |
* |
| 10148 |
* When generating beacon report from non-MBSSID Beacon frame, the SSID |
| 10149 |
* will be taken from the SSID element of the received Beacon frame. |
| 10150 |
* |
| 10151 |
* When generating beacon report from Multiple BSSID Beacon frame and if |
| 10152 |
* the BSSID of the current connected BSS matches the BSSID of the |
| 10153 |
* transmitting BSS, the SSID will be taken from the SSID element of the |
| 10154 |
* received Beacon frame. |
| 10155 |
* |
| 10156 |
* When generating beacon report from Multiple BSSID Beacon frame and if |
| 10157 |
* the BSSID of the current connected BSS matches the BSSID of one of |
| 10158 |
* the* nontransmitting BSSs, the SSID will be taken from the SSID field |
| 10159 |
* included in the nontransmitted BSS profile whose derived BSSID is |
| 10160 |
* same as the BSSID of the current connected BSS. When there is no |
| 10161 |
* nontransmitted BSS profile whose derived BSSID is same as the BSSID |
| 10162 |
* of current connected* BSS, this attribute will not be present. |
| 10163 |
*/ |
| 10164 |
QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_SSID = 4, |
| 10165 |
/* Used by the driver to encapsulate the BSSID of the AP to which STA is |
| 10166 |
* currently connected to when the |
| 10167 |
* QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_OP_TYPE is set to |
| 10168 |
* QCA_WLAN_VENDOR_BEACON_REPORTING_OP_BEACON_INFO. u8 array with a |
| 10169 |
* fixed size of 6 bytes. |
| 10170 |
* |
| 10171 |
* When generating beacon report from a Multiple BSSID beacon and the |
| 10172 |
* current connected BSSID matches one of the nontransmitted BSSIDs in a |
| 10173 |
* Multiple BSSID set, this BSSID will be that particular nontransmitted |
| 10174 |
* BSSID and not the transmitted BSSID (i.e., the transmitting address |
| 10175 |
* of the Beacon frame). |
| 10176 |
*/ |
| 10177 |
QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_BSSID = 5, |
| 10178 |
/* Used by the driver to encapsulate the frequency in MHz on which |
| 10179 |
* the Beacon frame was received when the |
| 10180 |
* QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_OP_TYPE is |
| 10181 |
* set to QCA_WLAN_VENDOR_BEACON_REPORTING_OP_BEACON_INFO. |
| 10182 |
* u32 attribute. |
| 10183 |
*/ |
| 10184 |
QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_FREQ = 6, |
| 10185 |
/* Used by the driver to encapsulate the Beacon interval |
| 10186 |
* when the QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_OP_TYPE is set to |
| 10187 |
* QCA_WLAN_VENDOR_BEACON_REPORTING_OP_BEACON_INFO. |
| 10188 |
* u16 attribute. The value will be copied from the Beacon frame and the |
| 10189 |
* units are TUs. |
| 10190 |
*/ |
| 10191 |
QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_BI = 7, |
| 10192 |
/* Used by the driver to encapsulate the Timestamp field from the Beacon |
| 10193 |
* frame when the QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_OP_TYPE is set |
| 10194 |
* to QCA_WLAN_VENDOR_BEACON_REPORTING_OP_BEACON_INFO. |
| 10195 |
* u64 attribute. |
| 10196 |
*/ |
| 10197 |
QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_TSF = 8, |
| 10198 |
/* Used by the driver to encapsulate the CLOCK_BOOTTIME when this |
| 10199 |
* Beacon frame is received in the driver when the |
| 10200 |
* QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_OP_TYPE is set to |
| 10201 |
* QCA_WLAN_VENDOR_BEACON_REPORTING_OP_BEACON_INFO. u64 attribute, in |
| 10202 |
* the units of nanoseconds. This value is expected to have accuracy of |
| 10203 |
* about 10 ms. |
| 10204 |
*/ |
| 10205 |
QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_BOOTTIME_WHEN_RECEIVED = 9, |
| 10206 |
/* Used by the driver to encapsulate the IEs of the Beacon frame from |
| 10207 |
* which this event is generated when the |
| 10208 |
* QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_OP_TYPE is set to |
| 10209 |
* QCA_WLAN_VENDOR_BEACON_REPORTING_OP_BEACON_INFO. u8 array. |
| 10210 |
*/ |
| 10211 |
QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_IES = 10, |
| 10212 |
/* Used by the driver to specify the reason for the driver/firmware to |
| 10213 |
* pause sending beacons to userspace when the |
| 10214 |
* QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_OP_TYPE is set to |
| 10215 |
* QCA_WLAN_VENDOR_BEACON_REPORTING_OP_PAUSE. Possible values are |
| 10216 |
* defined in enum qca_wlan_vendor_beacon_reporting_pause_reasons, u32 |
| 10217 |
* attribute. |
| 10218 |
*/ |
| 10219 |
QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_PAUSE_REASON = 11, |
| 10220 |
/* Used by the driver to specify whether the driver will automatically |
| 10221 |
* resume reporting beacon events to userspace later (for example after |
| 10222 |
* the ongoing off-channel activity is completed etc.) when the |
| 10223 |
* QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_OP_TYPE is set to |
| 10224 |
* QCA_WLAN_VENDOR_BEACON_REPORTING_OP_PAUSE. NLA_FLAG attribute. |
| 10225 |
*/ |
| 10226 |
QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_AUTO_RESUMES = 12, |
| 10227 |
/* Optionally set by userspace to request the driver not to resume |
| 10228 |
* beacon reporting after a pause is completed, when the |
| 10229 |
* QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_OP_TYPE is set to |
| 10230 |
* QCA_WLAN_VENDOR_BEACON_REPORTING_OP_START. NLA_FLAG attribute. |
| 10231 |
* If this flag is set, the driver will not resume beacon reporting |
| 10232 |
* after any pause in beacon reporting is completed. Userspace has to |
| 10233 |
* send QCA_WLAN_VENDOR_BEACON_REPORTING_OP_START command again in order |
| 10234 |
* to initiate beacon reporting again. If this flag is set in the recent |
| 10235 |
* QCA_WLAN_VENDOR_BEACON_REPORTING_OP_START command, then in the |
| 10236 |
* subsequent QCA_WLAN_VENDOR_BEACON_REPORTING_OP_PAUSE event (if any) |
| 10237 |
* the QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_AUTO_RESUMES shall not be |
| 10238 |
* set by the driver. Setting this flag until and unless there is a |
| 10239 |
* specific need is not recommended as there is a chance of some beacons |
| 10240 |
* received after pause command and next start command being not |
| 10241 |
* reported. |
| 10242 |
*/ |
| 10243 |
QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_DO_NOT_RESUME = 13, |
| 10244 |
|
| 10245 |
/* Keep last */ |
| 10246 |
QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_LAST, |
| 10247 |
QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_MAX = |
| 10248 |
QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_LAST - 1 |
| 10249 |
}; |
| 10250 |
|
| 10251 |
/** |
| 10252 |
* enum qca_vendor_interop_issues_ap_type - Interop issue types |
| 10253 |
* This enum defines the valid set of values of interop issue types. These |
| 10254 |
* values are used by attribute %QCA_WLAN_VENDOR_ATTR_INTEROP_ISSUES_AP_TYPE. |
| 10255 |
* |
| 10256 |
* @QCA_VENDOR_INTEROP_ISSUES_AP_ON_STA_PS: The AP has power save interop issue |
| 10257 |
* when the STA's Qpower feature is enabled. |
| 10258 |
*/ |
| 10259 |
enum qca_vendor_interop_issues_ap_type { |
| 10260 |
QCA_VENDOR_INTEROP_ISSUES_AP_INVALID = 0, |
| 10261 |
QCA_VENDOR_INTEROP_ISSUES_AP_ON_STA_PS = 1, |
| 10262 |
}; |
| 10263 |
|
| 10264 |
/** |
| 10265 |
* enum qca_vendor_attr_interop_issues_ap - attribute for AP with interop issues |
| 10266 |
* Values are used by %QCA_NL80211_VENDOR_SUBCMD_INTEROP_ISSUES_AP. |
| 10267 |
* |
| 10268 |
* @QCA_WLAN_VENDOR_ATTR_INTEROP_ISSUES_AP_INVALID: Invalid value |
| 10269 |
* @QCA_WLAN_VENDOR_ATTR_INTEROP_ISSUES_AP_TYPE: Interop issue type |
| 10270 |
* 32-bit unsigned value. The values defined in enum |
| 10271 |
* qca_vendor_interop_issues_ap_type are used. |
| 10272 |
* @QCA_WLAN_VENDOR_ATTR_INTEROP_ISSUES_AP_LIST: APs' BSSID container |
| 10273 |
* array of nested QCA_WLAN_VENDOR_ATTR_INTEROP_ISSUES_AP_BSSID attributes. |
| 10274 |
* It is present and mandatory for the command but is not used for the event |
| 10275 |
* since only a single BSSID is reported in an event. |
| 10276 |
* @QCA_WLAN_VENDOR_ATTR_INTEROP_ISSUES_AP_BSSID: AP's BSSID 6-byte MAC address. |
| 10277 |
* It is used within the nested QCA_WLAN_VENDOR_ATTR_INTEROP_ISSUES_AP_LIST |
| 10278 |
* attribute in command case and without such encapsulation in the event case. |
| 10279 |
* @QCA_WLAN_VENDOR_ATTR_INTEROP_ISSUES_AP_AFTER_LAST: last value |
| 10280 |
* @QCA_WLAN_VENDOR_ATTR_INTEROP_ISSUES_AP_MAX: max value |
| 10281 |
*/ |
| 10282 |
enum qca_vendor_attr_interop_issues_ap { |
| 10283 |
QCA_WLAN_VENDOR_ATTR_INTEROP_ISSUES_AP_INVALID, |
| 10284 |
QCA_WLAN_VENDOR_ATTR_INTEROP_ISSUES_AP_TYPE, |
| 10285 |
QCA_WLAN_VENDOR_ATTR_INTEROP_ISSUES_AP_LIST, |
| 10286 |
QCA_WLAN_VENDOR_ATTR_INTEROP_ISSUES_AP_BSSID, |
| 10287 |
/* keep last */ |
| 10288 |
QCA_WLAN_VENDOR_ATTR_INTEROP_ISSUES_AP_AFTER_LAST, |
| 10289 |
QCA_WLAN_VENDOR_ATTR_INTEROP_ISSUES_AP_MAX = |
| 10290 |
QCA_WLAN_VENDOR_ATTR_INTEROP_ISSUES_AP_AFTER_LAST - 1 |
| 10291 |
}; |
| 10292 |
|
| 10293 |
/** |
| 10294 |
* enum qca_vendor_oem_device_type - Represents the target device in firmware. |
| 10295 |
* It is used by QCA_WLAN_VENDOR_ATTR_OEM_DEVICE_INFO. |
| 10296 |
* |
| 10297 |
* @QCA_VENDOR_OEM_DEVICE_VIRTUAL: The command is intended for |
| 10298 |
* a virtual device. |
| 10299 |
* |
| 10300 |
* @QCA_VENDOR_OEM_DEVICE_PHYSICAL: The command is intended for |
| 10301 |
* a physical device. |
| 10302 |
*/ |
| 10303 |
enum qca_vendor_oem_device_type { |
| 10304 |
QCA_VENDOR_OEM_DEVICE_VIRTUAL = 0, |
| 10305 |
QCA_VENDOR_OEM_DEVICE_PHYSICAL = 1, |
| 10306 |
}; |
| 10307 |
|
| 10308 |
/** |
| 10309 |
* enum qca_wlan_vendor_attr_oem_data_params - Used by the vendor command/event |
| 10310 |
* QCA_NL80211_VENDOR_SUBCMD_OEM_DATA. |
| 10311 |
* |
| 10312 |
* @QCA_WLAN_VENDOR_ATTR_OEM_DATA_CMD_DATA: This NLA_BINARY attribute is |
| 10313 |
* used to set/query the data to/from the firmware. On query, the same |
| 10314 |
* attribute is used to carry the respective data in the reply sent by the |
| 10315 |
* driver to userspace. The request to set/query the data and the format of the |
| 10316 |
* respective data from the firmware are embedded in the attribute. The |
| 10317 |
* maximum size of the attribute payload is 1024 bytes. |
| 10318 |
* Userspace has to set the QCA_WLAN_VENDOR_ATTR_OEM_DATA_RESPONSE_EXPECTED |
| 10319 |
* attribute when the data is queried from the firmware. |
| 10320 |
* |
| 10321 |
* @QCA_WLAN_VENDOR_ATTR_OEM_DEVICE_INFO: The binary blob will be routed |
| 10322 |
* based on this field. This optional attribute is included to specify whether |
| 10323 |
* the device type is a virtual device or a physical device for the |
| 10324 |
* command/event. This attribute can be omitted for a virtual device (default) |
| 10325 |
* command/event. |
| 10326 |
* This u8 attribute is used to carry information for the device type using |
| 10327 |
* values defined by enum qca_vendor_oem_device_type. |
| 10328 |
* |
| 10329 |
* @QCA_WLAN_VENDOR_ATTR_OEM_DATA_RESPONSE_EXPECTED: This NLA_FLAG attribute |
| 10330 |
* is set when the userspace queries data from the firmware. This attribute |
| 10331 |
* should not be set when userspace sets the OEM data to the firmware. |
| 10332 |
*/ |
| 10333 |
enum qca_wlan_vendor_attr_oem_data_params { |
| 10334 |
QCA_WLAN_VENDOR_ATTR_OEM_DATA_INVALID = 0, |
| 10335 |
QCA_WLAN_VENDOR_ATTR_OEM_DATA_CMD_DATA = 1, |
| 10336 |
QCA_WLAN_VENDOR_ATTR_OEM_DEVICE_INFO = 2, |
| 10337 |
QCA_WLAN_VENDOR_ATTR_OEM_DATA_RESPONSE_EXPECTED = 3, |
| 10338 |
|
| 10339 |
/* keep last */ |
| 10340 |
QCA_WLAN_VENDOR_ATTR_OEM_DATA_PARAMS_AFTER_LAST, |
| 10341 |
QCA_WLAN_VENDOR_ATTR_OEM_DATA_PARAMS_MAX = |
| 10342 |
QCA_WLAN_VENDOR_ATTR_OEM_DATA_PARAMS_AFTER_LAST - 1 |
| 10343 |
}; |
| 10344 |
|
| 10345 |
/** |
| 10346 |
* enum qca_wlan_vendor_attr_avoid_frequency_ext - Defines attributes to be |
| 10347 |
* used with vendor command/event QCA_NL80211_VENDOR_SUBCMD_AVOID_FREQUENCY_EXT. |
| 10348 |
* |
| 10349 |
* @QCA_WLAN_VENDOR_ATTR_AVOID_FREQUENCY_RANGE: Required |
| 10350 |
* Nested attribute containing multiple ranges with following attributes: |
| 10351 |
* QCA_WLAN_VENDOR_ATTR_AVOID_FREQUENCY_START, |
| 10352 |
* QCA_WLAN_VENDOR_ATTR_AVOID_FREQUENCY_END, and |
| 10353 |
* QCA_WLAN_VENDOR_ATTR_AVOID_FREQUENCY_POWER_CAP_DBM. |
| 10354 |
* |
| 10355 |
* @QCA_WLAN_VENDOR_ATTR_AVOID_FREQUENCY_START: Required (u32) |
| 10356 |
* Starting center frequency in MHz. |
| 10357 |
* |
| 10358 |
* @QCA_WLAN_VENDOR_ATTR_AVOID_FREQUENCY_END: Required (u32) |
| 10359 |
* Ending center frequency in MHz. |
| 10360 |
* |
| 10361 |
* @QCA_WLAN_VENDOR_ATTR_AVOID_FREQUENCY_POWER_CAP_DBM: |
| 10362 |
* s32 attribute, optional. It is a per frequency range attribute. |
| 10363 |
* The maximum TX power limit from user space is to be applied on an |
| 10364 |
* unrestricted interface for corresponding frequency range. It is also |
| 10365 |
* possible that the actual TX power may be even lower than this cap due to |
| 10366 |
* other considerations such as regulatory compliance, SAR, etc. In absence of |
| 10367 |
* this attribute the driver shall follow current behavior which means |
| 10368 |
* interface (SAP/P2P) function can keep operating on an unsafe channel with TX |
| 10369 |
* power derived by the driver based on regulatory/SAR during interface up. |
| 10370 |
* |
| 10371 |
* @QCA_WLAN_VENDOR_ATTR_AVOID_FREQUENCY_IFACES_BITMASK: |
| 10372 |
* u32 attribute, optional. Indicates all the interface types which are |
| 10373 |
* restricted for all frequency ranges provided in |
| 10374 |
* %QCA_WLAN_VENDOR_ATTR_AVOID_FREQUENCY_START and |
| 10375 |
* %QCA_WLAN_VENDOR_ATTR_AVOID_FREQUENCY_END. |
| 10376 |
* This attribute encapsulates bitmasks of interface types defined in |
| 10377 |
* enum nl80211_iftype. If an interface is marked as restricted the driver must |
| 10378 |
* move to a safe channel and if no safe channel is available the driver shall |
| 10379 |
* terminate that interface functionality. In absence of this attribute, |
| 10380 |
* interface (SAP/P2P) can still continue operating on an unsafe channel with |
| 10381 |
* TX power limit derived from either |
| 10382 |
* %QCA_WLAN_VENDOR_ATTR_AVOID_FREQUENCY_POWER_CAP_DBM or based on |
| 10383 |
* regulatory/SAE limits if %QCA_WLAN_VENDOR_ATTR_AVOID_FREQUENCY_POWER_CAP_DBM |
| 10384 |
* is not provided. |
| 10385 |
*/ |
| 10386 |
enum qca_wlan_vendor_attr_avoid_frequency_ext { |
| 10387 |
QCA_WLAN_VENDOR_ATTR_AVOID_FREQUENCY_INVALID = 0, |
| 10388 |
QCA_WLAN_VENDOR_ATTR_AVOID_FREQUENCY_RANGE = 1, |
| 10389 |
QCA_WLAN_VENDOR_ATTR_AVOID_FREQUENCY_START = 2, |
| 10390 |
QCA_WLAN_VENDOR_ATTR_AVOID_FREQUENCY_END = 3, |
| 10391 |
QCA_WLAN_VENDOR_ATTR_AVOID_FREQUENCY_POWER_CAP_DBM = 4, |
| 10392 |
QCA_WLAN_VENDOR_ATTR_AVOID_FREQUENCY_IFACES_BITMASK = 5, |
| 10393 |
|
| 10394 |
QCA_WLAN_VENDOR_ATTR_AVOID_FREQUENCY_AFTER_LAST, |
| 10395 |
QCA_WLAN_VENDOR_ATTR_AVOID_FREQUENCY_MAX = |
| 10396 |
QCA_WLAN_VENDOR_ATTR_AVOID_FREQUENCY_AFTER_LAST - 1 |
| 10397 |
}; |
| 10398 |
|
| 10399 |
/* |
| 10400 |
* enum qca_wlan_vendor_attr_add_sta_node_params - Used by the vendor command |
| 10401 |
* QCA_NL80211_VENDOR_SUBCMD_ADD_STA_NODE. |
| 10402 |
*/ |
| 10403 |
enum qca_wlan_vendor_attr_add_sta_node_params { |
| 10404 |
QCA_WLAN_VENDOR_ATTR_ADD_STA_NODE_INVALID = 0, |
| 10405 |
/* 6 byte MAC address of STA */ |
| 10406 |
QCA_WLAN_VENDOR_ATTR_ADD_STA_NODE_MAC_ADDR = 1, |
| 10407 |
/* Authentication algorithm used by the station of size u16; |
| 10408 |
* defined in enum nl80211_auth_type. |
| 10409 |
*/ |
| 10410 |
QCA_WLAN_VENDOR_ATTR_ADD_STA_NODE_AUTH_ALGO = 2, |
| 10411 |
|
| 10412 |
/* keep last */ |
| 10413 |
QCA_WLAN_VENDOR_ATTR_ADD_STA_NODE_PARAM_AFTER_LAST, |
| 10414 |
QCA_WLAN_VENDOR_ATTR_ADD_STA_NODE_PARAM_MAX = |
| 10415 |
QCA_WLAN_VENDOR_ATTR_ADD_STA_NODE_PARAM_AFTER_LAST - 1 |
| 10416 |
}; |
| 10417 |
|
| 10418 |
/** |
| 10419 |
* enum qca_btc_chain_mode - Specifies BT coex chain mode. |
| 10420 |
* This enum defines the valid set of values of BT coex chain mode. |
| 10421 |
* These values are used by attribute %QCA_VENDOR_ATTR_BTC_CHAIN_MODE of |
| 10422 |
* %QCA_NL80211_VENDOR_SUBCMD_BTC_CHAIN_MODE. |
| 10423 |
* |
| 10424 |
* @QCA_BTC_CHAIN_SHARED: chains of BT and WLAN 2.4G are shared. |
| 10425 |
* @QCA_BTC_CHAIN_SEPARATED: chains of BT and WLAN 2.4G are separated. |
| 10426 |
*/ |
| 10427 |
enum qca_btc_chain_mode { |
| 10428 |
QCA_BTC_CHAIN_SHARED = 0, |
| 10429 |
QCA_BTC_CHAIN_SEPARATED = 1, |
| 10430 |
}; |
| 10431 |
|
| 10432 |
/** |
| 10433 |
* enum qca_vendor_attr_btc_chain_mode - Specifies attributes for BT coex |
| 10434 |
* chain mode. |
| 10435 |
* Attributes for data used by QCA_NL80211_VENDOR_SUBCMD_BTC_CHAIN_MODE. |
| 10436 |
* |
| 10437 |
* @QCA_VENDOR_ATTR_COEX_BTC_CHAIN_MODE: u32 attribute. |
| 10438 |
* Indicates the BT coex chain mode, are 32-bit values from |
| 10439 |
* enum qca_btc_chain_mode. This attribute is mandatory. |
| 10440 |
* |
| 10441 |
* @QCA_VENDOR_ATTR_COEX_BTC_CHAIN_MODE_RESTART: flag attribute. |
| 10442 |
* If set, vdev should be restarted when BT coex chain mode is updated. |
| 10443 |
* This attribute is optional. |
| 10444 |
*/ |
| 10445 |
enum qca_vendor_attr_btc_chain_mode { |
| 10446 |
QCA_VENDOR_ATTR_BTC_CHAIN_MODE_INVALID = 0, |
| 10447 |
QCA_VENDOR_ATTR_BTC_CHAIN_MODE = 1, |
| 10448 |
QCA_VENDOR_ATTR_BTC_CHAIN_MODE_RESTART = 2, |
| 10449 |
|
| 10450 |
/* Keep last */ |
| 10451 |
QCA_VENDOR_ATTR_BTC_CHAIN_MODE_LAST, |
| 10452 |
QCA_VENDOR_ATTR_BTC_CHAIN_MODE_MAX = |
| 10453 |
QCA_VENDOR_ATTR_BTC_CHAIN_MODE_LAST - 1, |
| 10454 |
}; |
| 10455 |
|
| 10456 |
/** |
| 10457 |
* enum qca_vendor_wlan_sta_flags - Station feature flags |
| 10458 |
* Bits will be set to 1 if the corresponding features are enabled. |
| 10459 |
* @QCA_VENDOR_WLAN_STA_FLAG_AMPDU: AMPDU is enabled for the station |
| 10460 |
* @QCA_VENDOR_WLAN_STA_FLAG_TX_STBC: TX Space-time block coding is enabled |
| 10461 |
for the station |
| 10462 |
* @QCA_VENDOR_WLAN_STA_FLAG_RX_STBC: RX Space-time block coding is enabled |
| 10463 |
for the station |
| 10464 |
*/ |
| 10465 |
enum qca_vendor_wlan_sta_flags { |
| 10466 |
QCA_VENDOR_WLAN_STA_FLAG_AMPDU = BIT(0), |
| 10467 |
QCA_VENDOR_WLAN_STA_FLAG_TX_STBC = BIT(1), |
| 10468 |
QCA_VENDOR_WLAN_STA_FLAG_RX_STBC = BIT(2), |
| 10469 |
}; |
| 10470 |
|
| 10471 |
/** |
| 10472 |
* enum qca_vendor_wlan_sta_guard_interval - Station guard interval |
| 10473 |
* @QCA_VENDOR_WLAN_STA_GI_800_NS: Legacy normal guard interval |
| 10474 |
* @QCA_VENDOR_WLAN_STA_GI_400_NS: Legacy short guard interval |
| 10475 |
* @QCA_VENDOR_WLAN_STA_GI_1600_NS: Guard interval used by HE |
| 10476 |
* @QCA_VENDOR_WLAN_STA_GI_3200_NS: Guard interval used by HE |
| 10477 |
*/ |
| 10478 |
enum qca_vendor_wlan_sta_guard_interval { |
| 10479 |
QCA_VENDOR_WLAN_STA_GI_800_NS = 0, |
| 10480 |
QCA_VENDOR_WLAN_STA_GI_400_NS = 1, |
| 10481 |
QCA_VENDOR_WLAN_STA_GI_1600_NS = 2, |
| 10482 |
QCA_VENDOR_WLAN_STA_GI_3200_NS = 3, |
| 10483 |
}; |
| 10484 |
|
| 10485 |
/** |
| 10486 |
* enum qca_wlan_vendor_attr_get_sta_info - Defines attributes |
| 10487 |
* used by QCA_NL80211_VENDOR_SUBCMD_GET_STA_INFO vendor command. |
| 10488 |
* |
| 10489 |
* @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_MAC: |
| 10490 |
* Required attribute in request for AP mode only, 6-byte MAC address, |
| 10491 |
* corresponding to the station's MAC address for which information is |
| 10492 |
* requested. For STA mode this is not required as the info always correspond |
| 10493 |
* to the self STA and the current/last association. |
| 10494 |
* |
| 10495 |
* @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_FLAGS: |
| 10496 |
* Optionally used in response, u32 attribute, contains a bitmap of different |
| 10497 |
* fields defined in enum qca_vendor_wlan_sta_flags, used in AP mode only. |
| 10498 |
* |
| 10499 |
* @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_GUARD_INTERVAL: |
| 10500 |
* Optionally used in response, u32 attribute, possible values are defined in |
| 10501 |
* enum qca_vendor_wlan_sta_guard_interval, used in AP mode only. |
| 10502 |
* Guard interval used by the station. |
| 10503 |
* |
| 10504 |
* @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_RETRY_COUNT: |
| 10505 |
* Optionally used in response, u32 attribute, used in AP mode only. |
| 10506 |
* Value indicates the number of data frames received from station with retry |
| 10507 |
* bit set to 1 in FC. |
| 10508 |
* |
| 10509 |
* @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_BC_MC_COUNT: |
| 10510 |
* Optionally used in response, u32 attribute, used in AP mode only. |
| 10511 |
* Counter for number of data frames with broadcast or multicast address in |
| 10512 |
* the destination address received from the station. |
| 10513 |
* |
| 10514 |
* @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TX_RETRY_SUCCEED: |
| 10515 |
* Optionally used in response, u32 attribute, used in both STA and AP modes. |
| 10516 |
* Value indicates the number of data frames successfully transmitted only |
| 10517 |
* after retrying the packets and for which the TX status has been updated |
| 10518 |
* back to host from target. |
| 10519 |
* |
| 10520 |
* @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TX_RETRY_EXHAUSTED: |
| 10521 |
* Optionally used in response, u32 attribute, used in both STA and AP mode. |
| 10522 |
* Value indicates the number of data frames not transmitted successfully even |
| 10523 |
* after retrying the packets for the number of times equal to the total number |
| 10524 |
* of retries allowed for that packet and for which the TX status has been |
| 10525 |
* updated back to host from target. |
| 10526 |
* |
| 10527 |
* @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TARGET_TX_TOTAL: |
| 10528 |
* Optionally used in response, u32 attribute, used in AP mode only. |
| 10529 |
* Counter in the target for the number of data frames successfully transmitted |
| 10530 |
* to the station. |
| 10531 |
* |
| 10532 |
* @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TARGET_TX_RETRY: |
| 10533 |
* Optionally used in response, u32 attribute, used in AP mode only. |
| 10534 |
* Value indicates the number of data frames successfully transmitted only |
| 10535 |
* after retrying the packets. |
| 10536 |
* |
| 10537 |
* @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TARGET_TX_RETRY_EXHAUSTED: |
| 10538 |
* Optionally used in response, u32 attribute, used in both STA & AP mode. |
| 10539 |
* Value indicates the number of data frames not transmitted successfully even |
| 10540 |
* after retrying the packets for the number of times equal to the total number |
| 10541 |
* of retries allowed for that packet. |
| 10542 |
* |
| 10543 |
* @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TX_PROBE_REQ_BMISS_COUNT: u32, used in |
| 10544 |
* the STA mode only. Represent the number of probe requests sent by the STA |
| 10545 |
* while attempting to roam on missing certain number of beacons from the |
| 10546 |
* connected AP. If queried in the disconnected state, this represents the |
| 10547 |
* count for the last connected state. |
| 10548 |
* |
| 10549 |
* @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_PROBE_RESP_BMISS_COUNT: u32, used in |
| 10550 |
* the STA mode. Represent the number of probe responses received by the station |
| 10551 |
* while attempting to roam on missing certain number of beacons from the |
| 10552 |
* connected AP. When queried in the disconnected state, this represents the |
| 10553 |
* count when in last connected state. |
| 10554 |
* |
| 10555 |
* @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TARGET_TX_ALL_COUNT: u32, used in the |
| 10556 |
* STA mode only. Represents the total number of frames sent out by STA |
| 10557 |
* including Data, ACK, RTS, CTS, Control Management. This data is maintained |
| 10558 |
* only for the connect session. Represents the count of last connected session, |
| 10559 |
* when queried in the disconnected state. |
| 10560 |
* |
| 10561 |
* @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TX_RTS_COUNT: u32, used in the STA mode. |
| 10562 |
* Total number of RTS sent out by the STA. This data is maintained per connect |
| 10563 |
* session. Represents the count of last connected session, when queried in the |
| 10564 |
* disconnected state. |
| 10565 |
* |
| 10566 |
* @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TX_RTS_RETRY_FAIL_COUNT: u32, used in the |
| 10567 |
* STA mode.Represent the number of RTS transmission failure that reach retry |
| 10568 |
* limit. This data is maintained per connect session. Represents the count of |
| 10569 |
* last connected session, when queried in the disconnected state. |
| 10570 |
* |
| 10571 |
* @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TX_DATA_NON_AGGREGATED_COUNT: u32, used in |
| 10572 |
* the STA mode. Represent the total number of non aggregated frames transmitted |
| 10573 |
* by the STA. This data is maintained per connect session. Represents the count |
| 10574 |
* of last connected session, when queried in the disconnected state. |
| 10575 |
* |
| 10576 |
* @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TX_DATA_AGGREGATED_COUNT: u32, used in the |
| 10577 |
* STA mode. Represent the total number of aggregated frames transmitted by the |
| 10578 |
* STA. This data is maintained per connect session. Represents the count of |
| 10579 |
* last connected session, when queried in the disconnected state. |
| 10580 |
* |
| 10581 |
* @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_FRAMES_GOOD_PLCP_COUNT: u32, used in |
| 10582 |
* the STA mode. Represents the number of received frames with a good PLCP. This |
| 10583 |
* data is maintained per connect session. Represents the count of last |
| 10584 |
* connected session, when queried in the disconnected state. |
| 10585 |
* |
| 10586 |
* @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_FRAMES_INVALID_DELIMITER_COUNT: u32, |
| 10587 |
* used in the STA mode. Represents the number of occasions that no valid |
| 10588 |
* delimiter is detected by A-MPDU parser. This data is maintained per connect |
| 10589 |
* session. Represents the count of last connected session, when queried in the |
| 10590 |
* disconnected state. |
| 10591 |
* |
| 10592 |
* @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_FRAMES_CRC_FAIL_COUNT: u32, used in the |
| 10593 |
* STA mode. Represents the number of frames for which CRC check failed in the |
| 10594 |
* MAC. This data is maintained per connect session. Represents the count of |
| 10595 |
* last connected session, when queried in the disconnected state. |
| 10596 |
* |
| 10597 |
* @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_ACKS_GOOD_FCS_COUNT: u32, used in the |
| 10598 |
* STA mode. Represents the number of unicast ACKs received with good FCS. This |
| 10599 |
* data is maintained per connect session. Represents the count of last |
| 10600 |
* connected session, when queried in the disconnected state. |
| 10601 |
* |
| 10602 |
* @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_BLOCKACK_COUNT: u32, used in the STA |
| 10603 |
* mode. Represents the number of received Block Acks. This data is maintained |
| 10604 |
* per connect session. Represents the count of last connected session, when |
| 10605 |
* queried in the disconnected state. |
| 10606 |
* |
| 10607 |
* @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_BEACON_COUNT: u32, used in the STA |
| 10608 |
* mode. Represents the number of beacons received from the connected BSS. This |
| 10609 |
* data is maintained per connect session. Represents the count of last |
| 10610 |
* connected session, when queried in the disconnected state. |
| 10611 |
* |
| 10612 |
* @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_OTHER_BEACON_COUNT: u32, used in the |
| 10613 |
* STA mode. Represents the number of beacons received by the other BSS when in |
| 10614 |
* connected state (through the probes done by the STA). This data is maintained |
| 10615 |
* per connect session. Represents the count of last connected session, when |
| 10616 |
* queried in the disconnected state. |
| 10617 |
* |
| 10618 |
* @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_UCAST_DATA_GOOD_FCS_COUNT: u64, used in |
| 10619 |
* the STA mode. Represents the number of received DATA frames with good FCS and |
| 10620 |
* matching Receiver Address when in connected state. This data is maintained |
| 10621 |
* per connect session. Represents the count of last connected session, when |
| 10622 |
* queried in the disconnected state. |
| 10623 |
* |
| 10624 |
* @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_DATA_BC_MC_DROP_COUNT: u32, used in the |
| 10625 |
* STA mode. Represents the number of RX Data multicast frames dropped by the HW |
| 10626 |
* when in the connected state. This data is maintained per connect session. |
| 10627 |
* Represents the count of last connected session, when queried in the |
| 10628 |
* disconnected state. |
| 10629 |
* |
| 10630 |
* @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TARGET_POWER_24G_1MBPS: u32, used in the |
| 10631 |
* STA mode. This represents the target power in dBm for the transmissions done |
| 10632 |
* to the AP in 2.4 GHz at 1 Mbps (DSSS) rate. This data is maintained per |
| 10633 |
* connect session. Represents the count of last connected session, when |
| 10634 |
* queried in the disconnected state. |
| 10635 |
* |
| 10636 |
* @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TARGET_POWER_24G_6MBPS: u32, used in the |
| 10637 |
* STA mode. This represents the Target power in dBm for transmissions done to |
| 10638 |
* the AP in 2.4 GHz at 6 Mbps (OFDM) rate. This data is maintained per connect |
| 10639 |
* session. Represents the count of last connected session, when queried in the |
| 10640 |
* disconnected state. |
| 10641 |
* |
| 10642 |
* @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TARGET_POWER_24G_MCS0: u32, used in the |
| 10643 |
* STA mode. This represents the Target power in dBm for transmissions done to |
| 10644 |
* the AP in 2.4 GHz at MCS0 rate. This data is maintained per connect session. |
| 10645 |
* Represents the count of last connected session, when queried in the |
| 10646 |
* disconnected state. |
| 10647 |
* |
| 10648 |
* @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TARGET_POWER_5G_6MBPS: u32, used in the |
| 10649 |
* STA mode. This represents the Target power in dBm for transmissions done to |
| 10650 |
* the AP in 5 GHz at 6 Mbps (OFDM) rate. This data is maintained per connect |
| 10651 |
* session. Represents the count of last connected session, when queried in |
| 10652 |
* the disconnected state. |
| 10653 |
* |
| 10654 |
* @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TARGET_POWER_5G_MCS0: u32, used in the |
| 10655 |
* STA mode. This represents the Target power in dBm for for transmissions done |
| 10656 |
* to the AP in 5 GHz at MCS0 rate. This data is maintained per connect session. |
| 10657 |
* Represents the count of last connected session, when queried in the |
| 10658 |
* disconnected state. |
| 10659 |
* |
| 10660 |
* @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_HW_BUFFERS_OVERFLOW_COUNT: u32, used |
| 10661 |
* in the STA mode. This represents the Nested attribute representing the |
| 10662 |
* overflow counts of each receive buffer allocated to the hardware during the |
| 10663 |
* STA's connection. The number of hw buffers might vary for each WLAN |
| 10664 |
* solution and hence this attribute represents the nested array of all such |
| 10665 |
* HW buffer count. This data is maintained per connect session. Represents |
| 10666 |
* the count of last connected session, when queried in the disconnected state. |
| 10667 |
* |
| 10668 |
* @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_MAX_TX_POWER: u32, Max TX power (dBm) |
| 10669 |
* allowed as per the regulatory requirements for the current or last connected |
| 10670 |
* session. Used in the STA mode. |
| 10671 |
* |
| 10672 |
* @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_LATEST_TX_POWER: u32, Latest TX power |
| 10673 |
* (dBm) used by the station in its latest unicast frame while communicating |
| 10674 |
* to the AP in the connected state. When queried in the disconnected state, |
| 10675 |
* this represents the TX power used by the STA with last AP communication |
| 10676 |
* when in connected state. |
| 10677 |
* |
| 10678 |
* @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_ANI_LEVEL: u32, Adaptive noise immunity |
| 10679 |
* level used to adjust the RX sensitivity. Represents the current ANI level |
| 10680 |
* when queried in the connected state. When queried in the disconnected |
| 10681 |
* state, this corresponds to the latest ANI level at the instance of |
| 10682 |
* disconnection. |
| 10683 |
* |
| 10684 |
* @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_BEACON_IES: Binary attribute containing |
| 10685 |
* the raw information elements from Beacon frames. Represents the Beacon frames |
| 10686 |
* of the current BSS in the connected state. When queried in the disconnected |
| 10687 |
* state, these IEs correspond to the last connected BSSID. |
| 10688 |
* |
| 10689 |
* @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_PROBE_RESP_IES: Binary attribute |
| 10690 |
* containing the raw information elements from Probe Response frames. |
| 10691 |
* Represents the Probe Response frames of the current BSS in the connected |
| 10692 |
* state. When queried in the disconnected state, these IEs correspond to the |
| 10693 |
* last connected BSSID. |
| 10694 |
* |
| 10695 |
* @QCA_WLAN_VENDOR_ATTR_GET_STA_DRIVER_DISCONNECT_REASON: u32, Driver |
| 10696 |
* disconnect reason for the last disconnection if the disconnection is |
| 10697 |
* triggered from the host driver. The values are referred from |
| 10698 |
* enum qca_disconnect_reason_codes. |
| 10699 |
* |
| 10700 |
* @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_BIP_MIC_ERROR_COUNT: u32, used in STA mode |
| 10701 |
* only. This represents the number of group addressed robust management frames |
| 10702 |
* received from this station with an invalid MIC or a missing MME when PMF is |
| 10703 |
* enabled. |
| 10704 |
* |
| 10705 |
* @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_BIP_REPLAY_COUNT: u32, used in STA mode |
| 10706 |
* only. This represents the number of group addressed robust management frames |
| 10707 |
* received from this station with the packet number less than or equal to the |
| 10708 |
* last received packet number when PMF is enabled. |
| 10709 |
* |
| 10710 |
* @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_BEACON_MIC_ERROR_COUNT: u32, used in STA |
| 10711 |
* mode only. This represents the number of Beacon frames received from this |
| 10712 |
* station with an invalid MIC or a missing MME when beacon protection is |
| 10713 |
* enabled. |
| 10714 |
* |
| 10715 |
* @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_BEACON_REPLAY_COUNT: u32, used in STA mode |
| 10716 |
* only. This represents number of Beacon frames received from this station with |
| 10717 |
* the packet number less than or equal to the last received packet number when |
| 10718 |
* beacon protection is enabled. |
| 10719 |
* |
| 10720 |
* @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_CONNECT_FAIL_REASON_CODE: u32, used in |
| 10721 |
* STA mode only. The driver uses this attribute to populate the connection |
| 10722 |
* failure reason codes and the values are defined in |
| 10723 |
* enum qca_sta_connect_fail_reason_codes. Userspace applications can send |
| 10724 |
* QCA_NL80211_VENDOR_SUBCMD_GET_STA_INFO vendor command after receiving |
| 10725 |
* a connection failure indication from the driver. The driver shall not |
| 10726 |
* include this attribute in response to the |
| 10727 |
* QCA_NL80211_VENDOR_SUBCMD_GET_STA_INFO command if there is no connection |
| 10728 |
* failure observed in the last attempted connection. |
| 10729 |
* |
| 10730 |
* @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_LATEST_TX_RATE: u32, latest TX rate (Kbps) |
| 10731 |
* used by the station in its last TX frame while communicating to the AP in the |
| 10732 |
* connected state. When queried in the disconnected state, this represents the |
| 10733 |
* rate used by the STA in the last TX frame to the AP when it was connected. |
| 10734 |
* This attribute is used for STA mode only. |
| 10735 |
* |
| 10736 |
* @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_LATEST_RIX: u32, used in STA mode only. |
| 10737 |
* This represents the rate index used by the STA for the last TX frame to the |
| 10738 |
* AP. When queried in the disconnected state, this gives the last RIX used by |
| 10739 |
* the STA in the last TX frame to the AP when it was connected. |
| 10740 |
* |
| 10741 |
* @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TSF_OUT_OF_SYNC_COUNT: u32, used in STA |
| 10742 |
* mode only. This represents the number of times the STA TSF goes out of sync |
| 10743 |
* from the AP after the connection. If queried in the disconnected state, this |
| 10744 |
* gives the count of TSF out of sync for the last connection. |
| 10745 |
* |
| 10746 |
* @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_ROAM_TRIGGER_REASON: u32, used in STA |
| 10747 |
* mode only. This represents the roam trigger reason for the last roaming |
| 10748 |
* attempted by the firmware. This can be queried either in connected state or |
| 10749 |
* disconnected state. Each bit of this attribute represents the different |
| 10750 |
* roam trigger reason code which are defined in enum qca_vendor_roam_triggers. |
| 10751 |
* |
| 10752 |
* @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_ROAM_FAIL_REASON: u32, used in STA mode |
| 10753 |
* only. This represents the roam fail reason for the last failed roaming |
| 10754 |
* attempt by the firmware. Different roam failure reason codes are specified |
| 10755 |
* in enum qca_vendor_roam_fail_reasons. This can be queried either in |
| 10756 |
* connected state or disconnected state. |
| 10757 |
* |
| 10758 |
* @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_ROAM_INVOKE_FAIL_REASON: u32, used in |
| 10759 |
* STA mode only. This represents the roam invoke fail reason for the last |
| 10760 |
* failed roam invoke. Different roam invoke failure reason codes |
| 10761 |
* are specified in enum qca_vendor_roam_invoke_fail_reasons. This can be |
| 10762 |
* queried either in connected state or disconnected state. |
| 10763 |
* |
| 10764 |
* @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_UPLINK_DELAY: u32, used in STA mode only. |
| 10765 |
* This represents the average congestion duration of uplink frames in MAC |
| 10766 |
* queue in unit of ms. This can be queried either in connected state or |
| 10767 |
* disconnected state. |
| 10768 |
*/ |
| 10769 |
enum qca_wlan_vendor_attr_get_sta_info { |
| 10770 |
QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_INVALID = 0, |
| 10771 |
QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_MAC = 1, |
| 10772 |
QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_FLAGS = 2, |
| 10773 |
QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_GUARD_INTERVAL = 3, |
| 10774 |
QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_RETRY_COUNT = 4, |
| 10775 |
QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_BC_MC_COUNT = 5, |
| 10776 |
QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TX_RETRY_SUCCEED = 6, |
| 10777 |
QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TX_RETRY_EXHAUSTED = 7, |
| 10778 |
QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TARGET_TX_TOTAL = 8, |
| 10779 |
QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TARGET_TX_RETRY = 9, |
| 10780 |
QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TARGET_TX_RETRY_EXHAUSTED = 10, |
| 10781 |
QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TX_PROBE_REQ_BMISS_COUNT = 11, |
| 10782 |
QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_PROBE_RESP_BMISS_COUNT = 12, |
| 10783 |
QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TARGET_TX_ALL_COUNT = 13, |
| 10784 |
QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TX_RTS_COUNT = 14, |
| 10785 |
QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TX_RTS_RETRY_FAIL_COUNT = 15, |
| 10786 |
QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TX_DATA_NON_AGGREGATED_COUNT = 16, |
| 10787 |
QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TX_DATA_AGGREGATED_COUNT = 17, |
| 10788 |
QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_FRAMES_GOOD_PLCP_COUNT = 18, |
| 10789 |
QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_FRAMES_INVALID_DELIMITER_COUNT = 19, |
| 10790 |
QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_FRAMES_CRC_FAIL_COUNT = 20, |
| 10791 |
QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_ACKS_GOOD_FCS_COUNT = 21, |
| 10792 |
QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_BLOCKACK_COUNT = 22, |
| 10793 |
QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_BEACON_COUNT = 23, |
| 10794 |
QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_OTHER_BEACON_COUNT = 24, |
| 10795 |
QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_UCAST_DATA_GOOD_FCS_COUNT = 25, |
| 10796 |
QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_DATA_BC_MC_DROP_COUNT = 26, |
| 10797 |
QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TARGET_POWER_24G_1MBPS = 27, |
| 10798 |
QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TARGET_POWER_24G_6MBPS = 28, |
| 10799 |
QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TARGET_POWER_24G_MCS0 = 29, |
| 10800 |
QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TARGET_POWER_5G_6MBPS = 30, |
| 10801 |
QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TARGET_POWER_5G_MCS0 = 31, |
| 10802 |
QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_HW_BUFFERS_OVERFLOW_COUNT = 32, |
| 10803 |
QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_MAX_TX_POWER = 33, |
| 10804 |
QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_LATEST_TX_POWER = 34, |
| 10805 |
QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_ANI_LEVEL = 35, |
| 10806 |
QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_BEACON_IES = 36, |
| 10807 |
QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_PROBE_RESP_IES = 37, |
| 10808 |
QCA_WLAN_VENDOR_ATTR_GET_STA_DRIVER_DISCONNECT_REASON = 38, |
| 10809 |
QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_BIP_MIC_ERROR_COUNT = 39, |
| 10810 |
QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_BIP_REPLAY_COUNT = 40, |
| 10811 |
QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_BEACON_MIC_ERROR_COUNT = 41, |
| 10812 |
QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_BEACON_REPLAY_COUNT = 42, |
| 10813 |
QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_CONNECT_FAIL_REASON_CODE = 43, |
| 10814 |
QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_LATEST_TX_RATE = 44, |
| 10815 |
QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_LATEST_RIX = 45, |
| 10816 |
QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TSF_OUT_OF_SYNC_COUNT = 46, |
| 10817 |
QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_ROAM_TRIGGER_REASON = 47, |
| 10818 |
QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_ROAM_FAIL_REASON = 48, |
| 10819 |
QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_ROAM_INVOKE_FAIL_REASON = 49, |
| 10820 |
QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_UPLINK_DELAY = 50, |
| 10821 |
|
| 10822 |
/* keep last */ |
| 10823 |
QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_AFTER_LAST, |
| 10824 |
QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_MAX = |
| 10825 |
QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_AFTER_LAST - 1, |
| 10826 |
}; |
| 10827 |
|
| 10828 |
/** |
| 10829 |
* enum qca_wlan_vendor_attr_update_sta_info - Defines attributes |
| 10830 |
* used by QCA_NL80211_VENDOR_SUBCMD_UPDATE_STA_INFO vendor command. |
| 10831 |
* |
| 10832 |
* @QCA_WLAN_VENDOR_ATTR_UPDATE_STA_INFO_CONNECT_CHANNELS: Type is NLA_UNSPEC. |
| 10833 |
* Used in STA mode. This attribute represents the list of channel center |
| 10834 |
* frequencies in MHz (u32) the station has learnt during the last connection |
| 10835 |
* or roaming attempt. This information shall not signify the channels for |
| 10836 |
* an explicit scan request from the user space. Host drivers can update this |
| 10837 |
* information to the user space in both connected and disconnected state. |
| 10838 |
* In the disconnected state this information shall signify the channels |
| 10839 |
* scanned in the last connection/roam attempt that lead to the disconnection. |
| 10840 |
*/ |
| 10841 |
enum qca_wlan_vendor_attr_update_sta_info { |
| 10842 |
QCA_WLAN_VENDOR_ATTR_UPDATE_STA_INFO_INVALID = 0, |
| 10843 |
QCA_WLAN_VENDOR_ATTR_UPDATE_STA_INFO_CONNECT_CHANNELS = 1, |
| 10844 |
|
| 10845 |
/* keep last */ |
| 10846 |
QCA_WLAN_VENDOR_ATTR_UPDATE_STA_INFO_AFTER_LAST, |
| 10847 |
QCA_WLAN_VENDOR_ATTR_UPDATE_STA_INFO_MAX = |
| 10848 |
QCA_WLAN_VENDOR_ATTR_UPDATE_STA_INFO_AFTER_LAST - 1, |
| 10849 |
}; |
| 10850 |
|
| 10851 |
/** |
| 10852 |
* enum qca_disconnect_reason_codes - Specifies driver disconnect reason codes. |
| 10853 |
* Used when the driver triggers the STA to disconnect from the AP. |
| 10854 |
* |
| 10855 |
* @QCA_DISCONNECT_REASON_UNSPECIFIED: The host driver triggered the |
| 10856 |
* disconnection with the AP due to unspecified reasons. |
| 10857 |
* |
| 10858 |
* @QCA_DISCONNECT_REASON_INTERNAL_ROAM_FAILURE: The host driver triggered the |
| 10859 |
* disconnection with the AP due to a roaming failure. This roaming is triggered |
| 10860 |
* internally (host driver/firmware). |
| 10861 |
* |
| 10862 |
* @QCA_DISCONNECT_REASON_EXTERNAL_ROAM_FAILURE: The driver disconnected from |
| 10863 |
* the AP when the user/external triggered roaming fails. |
| 10864 |
* |
| 10865 |
* @QCA_DISCONNECT_REASON_GATEWAY_REACHABILITY_FAILURE: This reason code is used |
| 10866 |
* by the host driver whenever gateway reachability failure is detected and the |
| 10867 |
* driver disconnects with AP. |
| 10868 |
* |
| 10869 |
* @QCA_DISCONNECT_REASON_UNSUPPORTED_CHANNEL_CSA: The driver disconnected from |
| 10870 |
* the AP on a channel switch announcement from it with an unsupported channel. |
| 10871 |
* |
| 10872 |
* @QCA_DISCONNECT_REASON_OPER_CHANNEL_DISABLED_INDOOR: On a concurrent AP start |
| 10873 |
* with indoor channels disabled and if the STA is connected on one of these |
| 10874 |
* disabled channels, the host driver disconnected the STA with this reason |
| 10875 |
* code. |
| 10876 |
* |
| 10877 |
* @QCA_DISCONNECT_REASON_OPER_CHANNEL_USER_DISABLED: Disconnection due to an |
| 10878 |
* explicit request from the user to disable the current operating channel. |
| 10879 |
* |
| 10880 |
* @QCA_DISCONNECT_REASON_DEVICE_RECOVERY: STA disconnected from the AP due to |
| 10881 |
* the internal host driver/firmware recovery. |
| 10882 |
* |
| 10883 |
* @QCA_DISCONNECT_REASON_KEY_TIMEOUT: The driver triggered the disconnection on |
| 10884 |
* a timeout for the key installations from the user space. |
| 10885 |
* |
| 10886 |
* @QCA_DISCONNECT_REASON_OPER_CHANNEL_BAND_CHANGE: The dDriver disconnected the |
| 10887 |
* STA on a band change request from the user space to a different band from the |
| 10888 |
* current operation channel/band. |
| 10889 |
* |
| 10890 |
* @QCA_DISCONNECT_REASON_IFACE_DOWN: The STA disconnected from the AP on an |
| 10891 |
* interface down trigger from the user space. |
| 10892 |
* |
| 10893 |
* @QCA_DISCONNECT_REASON_PEER_XRETRY_FAIL: The host driver disconnected the |
| 10894 |
* STA on getting continuous transmission failures for multiple Data frames. |
| 10895 |
* |
| 10896 |
* @QCA_DISCONNECT_REASON_PEER_INACTIVITY: The STA does a keep alive |
| 10897 |
* notification to the AP by transmitting NULL/G-ARP frames. This disconnection |
| 10898 |
* represents inactivity from AP on such transmissions. |
| 10899 |
|
| 10900 |
* @QCA_DISCONNECT_REASON_SA_QUERY_TIMEOUT: This reason code is used on |
| 10901 |
* disconnection when SA Query times out (AP does not respond to SA Query). |
| 10902 |
* |
| 10903 |
* @QCA_DISCONNECT_REASON_BEACON_MISS_FAILURE: The host driver disconnected the |
| 10904 |
* STA on missing the beacons continuously from the AP. |
| 10905 |
* |
| 10906 |
* @QCA_DISCONNECT_REASON_CHANNEL_SWITCH_FAILURE: Disconnection due to STA not |
| 10907 |
* able to move to the channel mentioned by the AP in CSA. |
| 10908 |
* |
| 10909 |
* @QCA_DISCONNECT_REASON_USER_TRIGGERED: User triggered disconnection. |
| 10910 |
*/ |
| 10911 |
enum qca_disconnect_reason_codes { |
| 10912 |
QCA_DISCONNECT_REASON_UNSPECIFIED = 0, |
| 10913 |
QCA_DISCONNECT_REASON_INTERNAL_ROAM_FAILURE = 1, |
| 10914 |
QCA_DISCONNECT_REASON_EXTERNAL_ROAM_FAILURE = 2, |
| 10915 |
QCA_DISCONNECT_REASON_GATEWAY_REACHABILITY_FAILURE = 3, |
| 10916 |
QCA_DISCONNECT_REASON_UNSUPPORTED_CHANNEL_CSA = 4, |
| 10917 |
QCA_DISCONNECT_REASON_OPER_CHANNEL_DISABLED_INDOOR = 5, |
| 10918 |
QCA_DISCONNECT_REASON_OPER_CHANNEL_USER_DISABLED = 6, |
| 10919 |
QCA_DISCONNECT_REASON_DEVICE_RECOVERY = 7, |
| 10920 |
QCA_DISCONNECT_REASON_KEY_TIMEOUT = 8, |
| 10921 |
QCA_DISCONNECT_REASON_OPER_CHANNEL_BAND_CHANGE = 9, |
| 10922 |
QCA_DISCONNECT_REASON_IFACE_DOWN = 10, |
| 10923 |
QCA_DISCONNECT_REASON_PEER_XRETRY_FAIL = 11, |
| 10924 |
QCA_DISCONNECT_REASON_PEER_INACTIVITY = 12, |
| 10925 |
QCA_DISCONNECT_REASON_SA_QUERY_TIMEOUT = 13, |
| 10926 |
QCA_DISCONNECT_REASON_BEACON_MISS_FAILURE = 14, |
| 10927 |
QCA_DISCONNECT_REASON_CHANNEL_SWITCH_FAILURE = 15, |
| 10928 |
QCA_DISCONNECT_REASON_USER_TRIGGERED = 16, |
| 10929 |
}; |
| 10930 |
|
| 10931 |
/** |
| 10932 |
* enum qca_wlan_vendor_attr_driver_disconnect_reason - Defines attributes |
| 10933 |
* used by %QCA_NL80211_VENDOR_SUBCMD_DRIVER_DISCONNECT_REASON vendor command. |
| 10934 |
* |
| 10935 |
* @QCA_WLAN_VENDOR_ATTR_DRIVER_DISCONNECT_REASCON_CODE: u32 attribute. |
| 10936 |
* This attribute represents the driver specific reason codes (local |
| 10937 |
* driver/firmware initiated reasons for disconnection) defined |
| 10938 |
* in enum qca_disconnect_reason_codes. |
| 10939 |
*/ |
| 10940 |
enum qca_wlan_vendor_attr_driver_disconnect_reason { |
| 10941 |
QCA_WLAN_VENDOR_ATTR_DRIVER_DISCONNECT_REASON_INVALID = 0, |
| 10942 |
QCA_WLAN_VENDOR_ATTR_DRIVER_DISCONNECT_REASCON_CODE = 1, |
| 10943 |
|
| 10944 |
/* keep last */ |
| 10945 |
QCA_WLAN_VENDOR_ATTR_DRIVER_DISCONNECT_REASON_AFTER_LAST, |
| 10946 |
QCA_WLAN_VENDOR_ATTR_DRIVER_DISCONNECT_REASON_MAX = |
| 10947 |
QCA_WLAN_VENDOR_ATTR_DRIVER_DISCONNECT_REASON_AFTER_LAST - 1, |
| 10948 |
}; |
| 10949 |
|
| 10950 |
/** |
| 10951 |
* enum qca_wlan_tspec_operation - Operation of the config TSPEC request |
| 10952 |
* |
| 10953 |
* Values for %QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_OPERATION. |
| 10954 |
*/ |
| 10955 |
enum qca_wlan_tspec_operation { |
| 10956 |
QCA_WLAN_TSPEC_ADD = 0, |
| 10957 |
QCA_WLAN_TSPEC_DEL = 1, |
| 10958 |
QCA_WLAN_TSPEC_GET = 2, |
| 10959 |
}; |
| 10960 |
|
| 10961 |
/** |
| 10962 |
* enum qca_wlan_tspec_direction - Direction in TSPEC |
| 10963 |
* As what is defined in IEEE Std 802.11-2016, Table 9-139. |
| 10964 |
* |
| 10965 |
* Values for %QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_DIRECTION. |
| 10966 |
*/ |
| 10967 |
enum qca_wlan_tspec_direction { |
| 10968 |
QCA_WLAN_TSPEC_DIRECTION_UPLINK = 0, |
| 10969 |
QCA_WLAN_TSPEC_DIRECTION_DOWNLINK = 1, |
| 10970 |
QCA_WLAN_TSPEC_DIRECTION_DIRECT = 2, |
| 10971 |
QCA_WLAN_TSPEC_DIRECTION_BOTH = 3, |
| 10972 |
}; |
| 10973 |
|
| 10974 |
/** |
| 10975 |
* enum qca_wlan_tspec_ack_policy - MAC acknowledgement policy in TSPEC |
| 10976 |
* As what is defined in IEEE Std 802.11-2016, Table 9-141. |
| 10977 |
* |
| 10978 |
* Values for %QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_ACK_POLICY. |
| 10979 |
*/ |
| 10980 |
enum qca_wlan_tspec_ack_policy { |
| 10981 |
QCA_WLAN_TSPEC_NORMAL_ACK = 0, |
| 10982 |
QCA_WLAN_TSPEC_NO_ACK = 1, |
| 10983 |
/* Reserved */ |
| 10984 |
QCA_WLAN_TSPEC_BLOCK_ACK = 3, |
| 10985 |
}; |
| 10986 |
|
| 10987 |
/** |
| 10988 |
* enum qca_wlan_vendor_attr_config_tspec - Defines attributes |
| 10989 |
* used by %QCA_NL80211_VENDOR_SUBCMD_CONFIG_TSPEC vendor command. |
| 10990 |
* |
| 10991 |
* @QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_OPERATION: |
| 10992 |
* u8 attribute. Specify the TSPEC operation of this request. Possible values |
| 10993 |
* are defined in enum qca_wlan_tspec_operation. |
| 10994 |
* Mandatory attribute for all kinds of config TSPEC requests. |
| 10995 |
* |
| 10996 |
* @QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_TSID: |
| 10997 |
* u8 attribute. TS ID. Possible values are 0-7. |
| 10998 |
* Applicable for operation: QCA_WLAN_TSPEC_ADD, QCA_WLAN_TSPEC_DEL, |
| 10999 |
* QCA_WLAN_TSPEC_GET. A mandatory attribute. |
| 11000 |
* |
| 11001 |
* @QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_DIRECTION: |
| 11002 |
* u8 attribute. Direction of data carried by the TS. Possible values are |
| 11003 |
* defined in enum qca_wlan_tspec_direction. |
| 11004 |
* Applicable for operation: QCA_WLAN_TSPEC_ADD. A mandatory attribute. |
| 11005 |
* |
| 11006 |
* @QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_APSD: |
| 11007 |
* Flag attribute. Indicate whether APSD is enabled for the traffic associated |
| 11008 |
* with the TS. set - enabled, not set - disabled. |
| 11009 |
* Applicable for operation: QCA_WLAN_TSPEC_ADD. A mandatory attribute. |
| 11010 |
* |
| 11011 |
* @QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_USER_PRIORITY: |
| 11012 |
* u8 attribute. User priority to be used for the transport of MSDUs/A-MSDUs |
| 11013 |
* belonging to this TS. Possible values are 0-7. |
| 11014 |
* Applicable for operation: QCA_WLAN_TSPEC_ADD. An optional attribute. |
| 11015 |
* |
| 11016 |
* @QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_ACK_POLICY: |
| 11017 |
* u8 attribute. Indicate whether MAC acknowledgements are required for |
| 11018 |
* MPDUs/A-MSDUs belonging to this TS and the form of those acknowledgements. |
| 11019 |
* Possible values are defined in enum qca_wlan_tspec_ack_policy. |
| 11020 |
* Applicable for operation: QCA_WLAN_TSPEC_ADD. A mandatory attribute. |
| 11021 |
* |
| 11022 |
* @QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_NOMINAL_MSDU_SIZE: |
| 11023 |
* u16 attribute. Specify the nominal size in bytes of MSDUs/A-MSDUs |
| 11024 |
* belonging to this TS. |
| 11025 |
* Applicable for operation: QCA_WLAN_TSPEC_ADD. A mandatory attribute. |
| 11026 |
* |
| 11027 |
* @QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_MAXIMUM_MSDU_SIZE: |
| 11028 |
* u16 attribute. Specify the maximum size in bytes of MSDUs/A-MSDUs |
| 11029 |
* belonging to this TS. |
| 11030 |
* Applicable for operation: QCA_WLAN_TSPEC_ADD. A mandatory attribute. |
| 11031 |
* |
| 11032 |
* @QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_MIN_SERVICE_INTERVAL: |
| 11033 |
* u32 attribute. Specify the minimum interval in microseconds between the |
| 11034 |
* start of two successive SPs. |
| 11035 |
* Applicable for operation: QCA_WLAN_TSPEC_ADD. A mandatory attribute. |
| 11036 |
* |
| 11037 |
* @QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_MAX_SERVICE_INTERVAL: |
| 11038 |
* u32 attribute. Specify the maximum interval in microseconds between the |
| 11039 |
* start of two successive SPs. |
| 11040 |
* Applicable for operation: QCA_WLAN_TSPEC_ADD. A mandatory attribute. |
| 11041 |
* |
| 11042 |
* @QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_INACTIVITY_INTERVAL: |
| 11043 |
* u32 attribute. Specify the minimum interval in microseconds that can elapse |
| 11044 |
* without arrival or transfer of an MPDU belonging to the TS before this TS |
| 11045 |
* is deleted by the MAC entity at the HC. |
| 11046 |
* Applicable for operation: QCA_WLAN_TSPEC_ADD. A mandatory attribute. |
| 11047 |
* |
| 11048 |
* @QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_SUSPENSION_INTERVAL: |
| 11049 |
* u32 attribute. Specify the minimum interval in microseconds that can elapse |
| 11050 |
* without arrival or transfer of an MSDU belonging to the TS before the |
| 11051 |
* generation of successive QoS(+)CF-Poll is stopped for this TS. A value of |
| 11052 |
* 0xFFFFFFFF disables the suspension interval. The value of the suspension |
| 11053 |
* interval is always less than or equal to the inactivity interval. |
| 11054 |
* Applicable for operation: QCA_WLAN_TSPEC_ADD. A mandatory attribute. |
| 11055 |
* |
| 11056 |
* @QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_MINIMUM_DATA_RATE: |
| 11057 |
* u32 attribute. Indicate the lowest data rate in bps specified at the MAC |
| 11058 |
* SAP for transport of MSDUs or A-MSDUs belonging to this TS within the |
| 11059 |
* bounds of this TSPEC. |
| 11060 |
* Applicable for operation: QCA_WLAN_TSPEC_ADD. An optional attribute. |
| 11061 |
* |
| 11062 |
* @QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_MEAN_DATA_RATE: |
| 11063 |
* u32 attribute. Indicate the average data rate in bps specified at the MAC |
| 11064 |
* SAP for transport of MSDUs or A-MSDUs belonging to this TS within the |
| 11065 |
* bounds of this TSPEC. |
| 11066 |
* Applicable for operation: QCA_WLAN_TSPEC_ADD. An optional attribute. |
| 11067 |
* |
| 11068 |
* @QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_PEAK_DATA_RATE: |
| 11069 |
* u32 attribute. Indicate the maximum allowable data rate in bps specified at |
| 11070 |
* the MAC SAP for transport of MSDUs or A-MSDUs belonging to this TS within |
| 11071 |
* the bounds of this TSPEC. |
| 11072 |
* Applicable for operation: QCA_WLAN_TSPEC_ADD. An optional attribute. |
| 11073 |
* |
| 11074 |
* @QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_BURST_SIZE: |
| 11075 |
* u32 attribute. Specify the maximum burst size in bytes of the MSDUs/A-MSDUs |
| 11076 |
* belonging to this TS that arrive at the MAC SAP at the peak data rate. A |
| 11077 |
* value of 0 indicates that there are no bursts. |
| 11078 |
* Applicable for operation: QCA_WLAN_TSPEC_ADD. An optional attribute. |
| 11079 |
* |
| 11080 |
* @QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_MINIMUM_PHY_RATE: |
| 11081 |
* u32 attribute. Indicate the minimum PHY rate in bps for transport of |
| 11082 |
* MSDUs/A-MSDUs belonging to this TS within the bounds of this TSPEC. |
| 11083 |
* Applicable for operation: QCA_WLAN_TSPEC_ADD. An optional attribute. |
| 11084 |
* |
| 11085 |
* @QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_SURPLUS_BANDWIDTH_ALLOWANCE: |
| 11086 |
* u16 attribute. Specify the excess allocation of time (and bandwidth) over |
| 11087 |
* and above the stated application rates required to transport an MSDU/A-MSDU |
| 11088 |
* belonging to the TS in this TSPEC. |
| 11089 |
* Applicable for operation: QCA_WLAN_TSPEC_ADD. A mandatory attribute. |
| 11090 |
*/ |
| 11091 |
enum qca_wlan_vendor_attr_config_tspec { |
| 11092 |
QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_INVALID = 0, |
| 11093 |
QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_OPERATION = 1, |
| 11094 |
QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_TSID = 2, |
| 11095 |
QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_DIRECTION = 3, |
| 11096 |
QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_APSD = 4, |
| 11097 |
QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_USER_PRIORITY = 5, |
| 11098 |
QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_ACK_POLICY = 6, |
| 11099 |
QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_NOMINAL_MSDU_SIZE = 7, |
| 11100 |
QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_MAXIMUM_MSDU_SIZE = 8, |
| 11101 |
QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_MIN_SERVICE_INTERVAL = 9, |
| 11102 |
QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_MAX_SERVICE_INTERVAL = 10, |
| 11103 |
QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_INACTIVITY_INTERVAL = 11, |
| 11104 |
QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_SUSPENSION_INTERVAL = 12, |
| 11105 |
QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_MINIMUM_DATA_RATE = 13, |
| 11106 |
QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_MEAN_DATA_RATE = 14, |
| 11107 |
QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_PEAK_DATA_RATE = 15, |
| 11108 |
QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_BURST_SIZE = 16, |
| 11109 |
QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_MINIMUM_PHY_RATE = 17, |
| 11110 |
QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_SURPLUS_BANDWIDTH_ALLOWANCE = 18, |
| 11111 |
|
| 11112 |
/* keep last */ |
| 11113 |
QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_AFTER_LAST, |
| 11114 |
QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_MAX = |
| 11115 |
QCA_WLAN_VENDOR_ATTR_CONFIG_TSPEC_AFTER_LAST - 1, |
| 11116 |
}; |
| 11117 |
|
| 11118 |
/** |
| 11119 |
* enum qca_wlan_vendor_oci_override_frame_type - OCI override frame type |
| 11120 |
* @QCA_WLAN_VENDOR_OCI_OVERRIDE_FRAME_SA_QUERY_REQ: SA Query Request frame |
| 11121 |
* @QCA_WLAN_VENDOR_OCI_OVERRIDE_FRAME_SA_QUERY_RESP: SA Query Response frame |
| 11122 |
* @QCA_WLAN_VENDOR_OCI_OVERRIDE_FRAME_FT_REASSOC_REQ: FT Reassociation Request |
| 11123 |
* frame |
| 11124 |
* @QCA_WLAN_VENDOR_OCI_OVERRIDE_FRAME_FILS_REASSOC_REQ: FILS Reassociation |
| 11125 |
* Request frame. |
| 11126 |
*/ |
| 11127 |
enum qca_wlan_vendor_oci_override_frame_type { |
| 11128 |
QCA_WLAN_VENDOR_OCI_OVERRIDE_FRAME_SA_QUERY_REQ = 1, |
| 11129 |
QCA_WLAN_VENDOR_OCI_OVERRIDE_FRAME_SA_QUERY_RESP = 2, |
| 11130 |
QCA_WLAN_VENDOR_OCI_OVERRIDE_FRAME_FT_REASSOC_REQ = 3, |
| 11131 |
QCA_WLAN_VENDOR_OCI_OVERRIDE_FRAME_FILS_REASSOC_REQ = 4, |
| 11132 |
}; |
| 11133 |
|
| 11134 |
/** |
| 11135 |
* enum qca_wlan_vendor_attr_oci_override: Represents attributes for |
| 11136 |
* OCI override request. These attributes are used inside nested attribute |
| 11137 |
* %QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_OCI_OVERRIDE in QCA vendor command |
| 11138 |
* %QCA_NL80211_VENDOR_SUBCMD_WIFI_TEST_CONFIGURATION. |
| 11139 |
* |
| 11140 |
* @QCA_WLAN_VENDOR_ATTR_OCI_OVERRIDE_FRAME_TYPE: Required attribute, u8. |
| 11141 |
* Values from enum qca_wlan_vendor_oci_override_frame_type used in this |
| 11142 |
* attribute to specify the frame type in which the OCI is to be overridden. |
| 11143 |
* |
| 11144 |
* @QCA_WLAN_VENDOR_ATTR_OCI_OVERRIDE_FREQUENCY: Required (u32) |
| 11145 |
* OCI frequency (in MHz) to override in the specified frame type. |
| 11146 |
*/ |
| 11147 |
enum qca_wlan_vendor_attr_oci_override { |
| 11148 |
QCA_WLAN_VENDOR_ATTR_OCI_OVERRIDE_INVALID = 0, |
| 11149 |
QCA_WLAN_VENDOR_ATTR_OCI_OVERRIDE_FRAME_TYPE = 1, |
| 11150 |
QCA_WLAN_VENDOR_ATTR_OCI_OVERRIDE_FREQUENCY = 2, |
| 11151 |
|
| 11152 |
/* keep last */ |
| 11153 |
QCA_WLAN_VENDOR_ATTR_OCI_OVERRIDE_AFTER_LAST, |
| 11154 |
QCA_WLAN_VENDOR_ATTR_OCI_OVERRIDE_MAX = |
| 11155 |
QCA_WLAN_VENDOR_ATTR_OCI_OVERRIDE_AFTER_LAST - 1, |
| 11156 |
}; |
| 11157 |
|
| 11158 |
/** |
| 11159 |
* enum qca_wlan_medium_assess_type - Type of medium assess request |
| 11160 |
* |
| 11161 |
* Values for %QCA_WLAN_VENDOR_ATTR_MEDIUM_ASSESS_TYPE. |
| 11162 |
*/ |
| 11163 |
enum qca_wlan_medium_assess_type { |
| 11164 |
QCA_WLAN_MEDIUM_ASSESS_CCA = 0, |
| 11165 |
QCA_WLAN_MEDIUM_ASSESS_CONGESTION_REPORT = 1, |
| 11166 |
}; |
| 11167 |
|
| 11168 |
/** |
| 11169 |
* enum qca_wlan_vendor_attr_medium_assess - Attributes used by |
| 11170 |
* %QCA_NL80211_VENDOR_SUBCMD_MEDIUM_ASSESS vendor command. |
| 11171 |
* |
| 11172 |
* @QCA_WLAN_VENDOR_ATTR_MEDIUM_ASSESS_TYPE: |
| 11173 |
* u8 attribute. Mandatory in all kinds of medium assess requests/responses. |
| 11174 |
* Specify the type of medium assess request and indicate its type in response. |
| 11175 |
* Possible values are defined in enum qca_wlan_medium_assess_type. |
| 11176 |
* |
| 11177 |
* @QCA_WLAN_VENDOR_ATTR_MEDIUM_ASSESS_PERIOD: |
| 11178 |
* u32 attribute. Mandatory in CCA request. |
| 11179 |
* Specify the assessment period in terms of seconds. Assessment result will be |
| 11180 |
* sent as the response to the CCA request after the assessment period. |
| 11181 |
* |
| 11182 |
* @QCA_WLAN_VENDOR_ATTR_MEDIUM_ASSESS_TOTAL_CYCLE_COUNT: |
| 11183 |
* u32 attribute. Mandatory in response to CCA request. |
| 11184 |
* Total timer tick count of the assessment cycle. |
| 11185 |
* |
| 11186 |
* @QCA_WLAN_VENDOR_ATTR_MEDIUM_ASSESS_IDLE_COUNT: |
| 11187 |
* u32 attribute. Mandatory in response to CCA request. |
| 11188 |
* Timer tick count of idle time in the assessment cycle. |
| 11189 |
* |
| 11190 |
* @QCA_WLAN_VENDOR_ATTR_MEDIUM_ASSESS_IBSS_RX_COUNT: |
| 11191 |
* u32 attribute. Mandatory in response to CCA request. |
| 11192 |
* Timer tick count of Intra BSS traffic RX time in the assessment cycle. |
| 11193 |
* |
| 11194 |
* @QCA_WLAN_VENDOR_ATTR_MEDIUM_ASSESS_OBSS_RX_COUNT: |
| 11195 |
* u32 attribute. Mandatory in response to CCA request. |
| 11196 |
* Timer tick count of Overlapping BSS traffic RX time in the assessment cycle. |
| 11197 |
* |
| 11198 |
* @QCA_WLAN_VENDOR_ATTR_MEDIUM_ASSESS_MAX_IBSS_RSSI: |
| 11199 |
* s32 attribute. Mandatory in response to CCA request. |
| 11200 |
* Maximum RSSI of Intra BSS traffic in the assessment cycle. |
| 11201 |
* |
| 11202 |
* @QCA_WLAN_VENDOR_ATTR_MEDIUM_ASSESS_MIN_IBSS_RSSI: |
| 11203 |
* s32 attribute. Mandatory in response to CCA request. |
| 11204 |
* Minimum RSSI of Intra BSS traffic in the assessment cycle. |
| 11205 |
* |
| 11206 |
* @QCA_WLAN_VENDOR_ATTR_MEDIUM_ASSESS_CONGESTION_REPORT_ENABLE: |
| 11207 |
* u8 attribute. Mandatory in congestion report request. |
| 11208 |
* 1-enable 0-disable. |
| 11209 |
* |
| 11210 |
* @QCA_WLAN_VENDOR_ATTR_MEDIUM_ASSESS_CONGESTION_REPORT_THRESHOLD: |
| 11211 |
* u8 attribute. Mandatory in congestion report enable request and will be |
| 11212 |
* ignored if present in congestion report disable request. Possible values are |
| 11213 |
* 0-100. A vendor event QCA_NL80211_VENDOR_SUBCMD_MEDIUM_ASSESS with the type |
| 11214 |
* QCA_WLAN_MEDIUM_ASSESS_CONGESTION_REPORT will be sent to userspace if |
| 11215 |
* congestion percentage reaches the configured threshold. |
| 11216 |
* |
| 11217 |
* @QCA_WLAN_VENDOR_ATTR_MEDIUM_ASSESS_CONGESTION_REPORT_INTERVAL: |
| 11218 |
* u8 attribute. Optional in congestion report enable request and will be |
| 11219 |
* ignored if present in congestion report disable request. |
| 11220 |
* Specify the interval of congestion report event in terms of seconds. Possible |
| 11221 |
* values are 1-255. Default value 1 will be used if this attribute is omitted |
| 11222 |
* or using invalid values. |
| 11223 |
* |
| 11224 |
* @QCA_WLAN_VENDOR_ATTR_MEDIUM_ASSESS_CONGESTION_PERCENTAGE: |
| 11225 |
* u8 attribute. Mandatory in congestion report event. |
| 11226 |
* Indicate the actual congestion percentage. Possible values are 0-100. |
| 11227 |
*/ |
| 11228 |
enum qca_wlan_vendor_attr_medium_assess { |
| 11229 |
QCA_WLAN_VENDOR_ATTR_MEDIUM_ASSESS_INVALID = 0, |
| 11230 |
QCA_WLAN_VENDOR_ATTR_MEDIUM_ASSESS_TYPE = 1, |
| 11231 |
|
| 11232 |
QCA_WLAN_VENDOR_ATTR_MEDIUM_ASSESS_PERIOD = 2, |
| 11233 |
QCA_WLAN_VENDOR_ATTR_MEDIUM_ASSESS_TOTAL_CYCLE_COUNT = 3, |
| 11234 |
QCA_WLAN_VENDOR_ATTR_MEDIUM_ASSESS_IDLE_COUNT = 4, |
| 11235 |
QCA_WLAN_VENDOR_ATTR_MEDIUM_ASSESS_IBSS_RX_COUNT = 5, |
| 11236 |
QCA_WLAN_VENDOR_ATTR_MEDIUM_ASSESS_OBSS_RX_COUNT = 6, |
| 11237 |
QCA_WLAN_VENDOR_ATTR_MEDIUM_ASSESS_MAX_IBSS_RSSI = 7, |
| 11238 |
QCA_WLAN_VENDOR_ATTR_MEDIUM_ASSESS_MIN_IBSS_RSSI = 8, |
| 11239 |
|
| 11240 |
QCA_WLAN_VENDOR_ATTR_MEDIUM_ASSESS_CONGESTION_REPORT_ENABLE = 9, |
| 11241 |
QCA_WLAN_VENDOR_ATTR_MEDIUM_ASSESS_CONGESTION_REPORT_THRESHOLD = 10, |
| 11242 |
QCA_WLAN_VENDOR_ATTR_MEDIUM_ASSESS_CONGESTION_REPORT_INTERVAL = 11, |
| 11243 |
QCA_WLAN_VENDOR_ATTR_MEDIUM_ASSESS_CONGESTION_PERCENTAGE = 12, |
| 11244 |
|
| 11245 |
/* keep last */ |
| 11246 |
QCA_WLAN_VENDOR_ATTR_MEDIUM_ASSESS_AFTER_LAST, |
| 11247 |
QCA_WLAN_VENDOR_ATTR_MEDIUM_ASSESS_MAX = |
| 11248 |
QCA_WLAN_VENDOR_ATTR_MEDIUM_ASSESS_AFTER_LAST - 1, |
| 11249 |
}; |
| 11250 |
|
| 11251 |
/** |
| 11252 |
* enum qca_wlan_vendor_attr_mbssid_tx_vdev_status - Defines attributes |
| 11253 |
* used by QCA_NL80211_VENDOR_SUBCMD_MBSSID_TX_VDEV_STATUS vendor command. |
| 11254 |
* |
| 11255 |
* @QCA_WLAN_VENDOR_ATTR_MBSSID_TX_VDEV_STATUS_VAL: |
| 11256 |
* u8 attribute. Notify the TX VDEV status. Possible values 0, 1 |
| 11257 |
* belonging to MBSSID/EMA_AP configuration. 0 means Non-Tx VDEV, |
| 11258 |
* 1 means Tx VDEV. Mandatory attribute for all MBSSID VDEV status events. |
| 11259 |
* |
| 11260 |
* @QCA_WLAN_VENDOR_ATTR_MBSSID_TX_VDEV_EVENT: |
| 11261 |
* u8 attribute, required. 1 means Tx VDEV up event. 0 means Tx VDEV down event. |
| 11262 |
* |
| 11263 |
* @QCA_WLAN_VENDOR_ATTR_MBSSID_TX_VDEV_GROUP_ID: |
| 11264 |
* u8 attribute, required. Indicates group id of Tx VDEV. |
| 11265 |
* |
| 11266 |
* @QCA_WLAN_VENDOR_ATTR_MBSSID_TX_VDEV_GROUP_INFO: |
| 11267 |
* Nested attribute. This attribute shall be used by the driver to send |
| 11268 |
* group information. The attributes defined in enum |
| 11269 |
* qca_wlan_vendor_attr_mbssid_tx_vdev_group_info |
| 11270 |
* are nested in this attribute. |
| 11271 |
*/ |
| 11272 |
enum qca_wlan_vendor_attr_mbssid_tx_vdev_status { |
| 11273 |
QCA_WLAN_VENDOR_ATTR_MBSSID_TX_VDEV_STATUS_INVALID = 0, |
| 11274 |
QCA_WLAN_VENDOR_ATTR_MBSSID_TX_VDEV_STATUS_VAL = 1, |
| 11275 |
QCA_WLAN_VENDOR_ATTR_MBSSID_TX_VDEV_EVENT = 2, |
| 11276 |
QCA_WLAN_VENDOR_ATTR_MBSSID_TX_VDEV_GROUP_ID = 3, |
| 11277 |
QCA_WLAN_VENDOR_ATTR_MBSSID_TX_VDEV_GROUP_INFO = 4, |
| 11278 |
|
| 11279 |
/* keep last */ |
| 11280 |
QCA_WLAN_VENDOR_ATTR_MBSSID_TX_VDEV_STATUS_AFTER_LAST, |
| 11281 |
QCA_WLAN_VENDOR_ATTR_MBSSID_TX_VDEV_STATUS_MAX = |
| 11282 |
QCA_WLAN_VENDOR_ATTR_MBSSID_TX_VDEV_STATUS_AFTER_LAST - 1, |
| 11283 |
}; |
| 11284 |
|
| 11285 |
/** |
| 11286 |
* enum qca_wlan_vendor_attr_mbssid_tx_vdev_group_info - Attributes used |
| 11287 |
* inside %QCA_WLAN_VENDOR_ATTR_MBSSID_TX_VDEV_GROUP_INFO nested attribute. |
| 11288 |
* |
| 11289 |
* @QCA_WLAN_VENDOR_ATTR_MBSSID_TX_VDEV_GROUP_INFO_IF_INDEX: |
| 11290 |
* u32 attribute, required. Contains interface index. |
| 11291 |
* |
| 11292 |
* @QCA_WLAN_VENDOR_ATTR_MBSSID_TX_VDEV_GROUP_INFO_STATUS: |
| 11293 |
* u8 attribute, required. 0 - means vdev is in down state. |
| 11294 |
* 1 - means vdev is in up state. |
| 11295 |
*/ |
| 11296 |
enum qca_wlan_vendor_attr_mbssid_tx_vdev_group_info { |
| 11297 |
QCA_WLAN_VENDOR_ATTR_MBSSID_TX_VDEV_GROUP_INFO_INVALID = 0, |
| 11298 |
QCA_WLAN_VENDOR_ATTR_MBSSID_TX_VDEV_GROUP_INFO_IF_INDEX = 1, |
| 11299 |
QCA_WLAN_VENDOR_ATTR_MBSSID_TX_VDEV_GROUP_INFO_STATUS = 2, |
| 11300 |
|
| 11301 |
QCA_WLAN_VENDOR_ATTR_MBSSID_TX_VDEV_GROUP_INFO_AFTER_LAST, |
| 11302 |
QCA_WLAN_VENDOR_ATTR_MBSSID_TX_VDEV_GROUP_INFO_MAX = |
| 11303 |
QCA_WLAN_VENDOR_ATTR_MBSSID_TX_VDEV_GROUP_INFO - 1, |
| 11304 |
}; |
| 11305 |
|
| 11306 |
/** |
| 11307 |
* enum qca_wlan_concurrent_sta_policy_config - Concurrent STA policies |
| 11308 |
* |
| 11309 |
* @QCA_WLAN_CONCURRENT_STA_POLICY_PREFER_PRIMARY: Preference to the primary |
| 11310 |
* STA interface has to be given while selecting the connection policies |
| 11311 |
* (e.g., BSSID, band, TX/RX chains, etc.) for the subsequent STA interface. |
| 11312 |
* An interface is set as primary through the attribute |
| 11313 |
* QCA_WLAN_VENDOR_ATTR_CONFIG_CONCURRENT_STA_PRIMARY. This policy is not |
| 11314 |
* applicable if the primary interface has not been set earlier. |
| 11315 |
* |
| 11316 |
* The intention is not to downgrade the primary STA performance, such as: |
| 11317 |
* - Do not reduce the number of TX/RX chains of primary connection. |
| 11318 |
* - Do not optimize DBS vs. MCC/SCC, if DBS ends up reducing the number of |
| 11319 |
* chains. |
| 11320 |
* - If using MCC, should set the MCC duty cycle of the primary connection to |
| 11321 |
* be higher than the secondary connection. |
| 11322 |
* |
| 11323 |
* @QCA_WLAN_CONCURRENT_STA_POLICY_UNBIASED: The connection policies for the |
| 11324 |
* subsequent STA connection shall be chosen to balance with the existing |
| 11325 |
* concurrent STA's performance. |
| 11326 |
* Such as |
| 11327 |
* - Can choose MCC or DBS mode depending on the MCC efficiency and hardware |
| 11328 |
* capability. |
| 11329 |
* - If using MCC, set the MCC duty cycle of the primary connection to be equal |
| 11330 |
* to the secondary. |
| 11331 |
* - Prefer BSSID candidates which will help provide the best "overall" |
| 11332 |
* performance for all the STA connections. |
| 11333 |
*/ |
| 11334 |
enum qca_wlan_concurrent_sta_policy_config { |
| 11335 |
QCA_WLAN_CONCURRENT_STA_POLICY_PREFER_PRIMARY = 0, |
| 11336 |
QCA_WLAN_CONCURRENT_STA_POLICY_UNBIASED = 1, |
| 11337 |
}; |
| 11338 |
|
| 11339 |
/** |
| 11340 |
* enum qca_wlan_vendor_attr_concurrent_sta_policy - Defines attributes |
| 11341 |
* used by QCA_NL80211_VENDOR_SUBCMD_CONCURRENT_MULTI_STA_POLICY vendor command. |
| 11342 |
* |
| 11343 |
* @QCA_WLAN_VENDOR_ATTR_CONCURRENT_STA_POLICY_CONFIG: |
| 11344 |
* u8 attribute. Configures the concurrent STA policy configuration. |
| 11345 |
* Possible values are defined in enum qca_wlan_concurrent_sta_policy_config. |
| 11346 |
*/ |
| 11347 |
enum qca_wlan_vendor_attr_concurrent_sta_policy { |
| 11348 |
QCA_WLAN_VENDOR_ATTR_CONCURRENT_STA_POLICY_INVALID = 0, |
| 11349 |
QCA_WLAN_VENDOR_ATTR_CONCURRENT_STA_POLICY_CONFIG = 1, |
| 11350 |
|
| 11351 |
/* keep last */ |
| 11352 |
QCA_WLAN_VENDOR_ATTR_CONCURRENT_STA_POLICY_AFTER_LAST, |
| 11353 |
QCA_WLAN_VENDOR_ATTR_CONCURRENT_STA_POLICY_MAX = |
| 11354 |
QCA_WLAN_VENDOR_ATTR_CONCURRENT_STA_POLICY_AFTER_LAST - 1, |
| 11355 |
|
| 11356 |
}; |
| 11357 |
|
| 11358 |
/** |
| 11359 |
* enum qca_sta_connect_fail_reason_codes - Defines values carried |
| 11360 |
* by QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_CONNECT_FAIL_REASON_CODE vendor |
| 11361 |
* attribute. |
| 11362 |
* @QCA_STA_CONNECT_FAIL_REASON_NO_BSS_FOUND: No Probe Response frame received |
| 11363 |
* for unicast Probe Request frame. |
| 11364 |
* @QCA_STA_CONNECT_FAIL_REASON_AUTH_TX_FAIL: STA failed to send auth request. |
| 11365 |
* @QCA_STA_CONNECT_FAIL_REASON_AUTH_NO_ACK_RECEIVED: AP didn't send ACK for |
| 11366 |
* auth request. |
| 11367 |
* @QCA_STA_CONNECT_FAIL_REASON_AUTH_NO_RESP_RECEIVED: Auth response is not |
| 11368 |
* received from AP. |
| 11369 |
* @QCA_STA_CONNECT_FAIL_REASON_ASSOC_REQ_TX_FAIL: STA failed to send |
| 11370 |
* Association Request frame. |
| 11371 |
* @QCA_STA_CONNECT_FAIL_REASON_ASSOC_NO_ACK_RECEIVED: AP didn't send ACK for |
| 11372 |
* Association Request frame. |
| 11373 |
* @QCA_STA_CONNECT_FAIL_REASON_ASSOC_NO_RESP_RECEIVED: Association Response |
| 11374 |
* frame is not received from AP. |
| 11375 |
*/ |
| 11376 |
enum qca_sta_connect_fail_reason_codes { |
| 11377 |
QCA_STA_CONNECT_FAIL_REASON_NO_BSS_FOUND = 1, |
| 11378 |
QCA_STA_CONNECT_FAIL_REASON_AUTH_TX_FAIL = 2, |
| 11379 |
QCA_STA_CONNECT_FAIL_REASON_AUTH_NO_ACK_RECEIVED = 3, |
| 11380 |
QCA_STA_CONNECT_FAIL_REASON_AUTH_NO_RESP_RECEIVED = 4, |
| 11381 |
QCA_STA_CONNECT_FAIL_REASON_ASSOC_REQ_TX_FAIL = 5, |
| 11382 |
QCA_STA_CONNECT_FAIL_REASON_ASSOC_NO_ACK_RECEIVED = 6, |
| 11383 |
QCA_STA_CONNECT_FAIL_REASON_ASSOC_NO_RESP_RECEIVED = 7, |
| 11384 |
}; |
| 11385 |
|
| 11386 |
/** |
| 11387 |
* enum qca_wlan_vendor_usable_channels_filter - Bitmask of different |
| 11388 |
* filters defined in this enum are used in attribute |
| 11389 |
* %QCA_WLAN_VENDOR_ATTR_USABLE_CHANNELS_FILTER_MASK. |
| 11390 |
* |
| 11391 |
* @QCA_WLAN_VENDOR_FILTER_CELLULAR_COEX: When this bit is set, the driver |
| 11392 |
* shall filter the channels which are not usable because of coexistence with |
| 11393 |
* cellular radio. |
| 11394 |
* @QCA_WLAN_VENDOR_FILTER_WLAN_CONCURRENCY: When this bit is set, the driver |
| 11395 |
* shall filter the channels which are not usable because of existing active |
| 11396 |
* interfaces in the driver and will result in Multi Channel Concurrency, etc. |
| 11397 |
* |
| 11398 |
*/ |
| 11399 |
enum qca_wlan_vendor_usable_channels_filter { |
| 11400 |
QCA_WLAN_VENDOR_FILTER_CELLULAR_COEX = 0, |
| 11401 |
QCA_WLAN_VENDOR_FILTER_WLAN_CONCURRENCY = 1, |
| 11402 |
}; |
| 11403 |
|
| 11404 |
/** |
| 11405 |
* enum qca_wlan_vendor_attr_chan_info - Attributes used inside |
| 11406 |
* %QCA_WLAN_VENDOR_ATTR_USABLE_CHANNELS_CHAN_INFO nested attribute. |
| 11407 |
* |
| 11408 |
* @QCA_WLAN_VENDOR_ATTR_CHAN_INFO_PRIMARY_FREQ: |
| 11409 |
* u32 attribute, required. Indicates the center frequency of the primary |
| 11410 |
* channel in MHz. |
| 11411 |
* |
| 11412 |
* @QCA_WLAN_VENDOR_ATTR_CHAN_INFO_SEG0_FREQ: |
| 11413 |
* u32 attribute. Indicates the center frequency of the primary segment of the |
| 11414 |
* channel in MHz. This attribute is required when reporting 40 MHz, 80 MHz, |
| 11415 |
* 160 MHz, and 320 MHz channels. |
| 11416 |
* |
| 11417 |
* @QCA_WLAN_VENDOR_ATTR_CHAN_INFO_SEG1_FREQ: |
| 11418 |
* u32 attribute. Indicates the center frequency of the secondary segment of |
| 11419 |
* 80+80 channel in MHz. This attribute is required only when |
| 11420 |
* QCA_WLAN_VENDOR_ATTR_CHAN_INFO_BANDWIDTH is set to NL80211_CHAN_WIDTH_80P80. |
| 11421 |
* |
| 11422 |
* @QCA_WLAN_VENDOR_ATTR_CHAN_INFO_BANDWIDTH: |
| 11423 |
* u32 attribute, required. Indicates the bandwidth of the channel, possible |
| 11424 |
* values are defined in enum nl80211_chan_width. |
| 11425 |
* |
| 11426 |
* @QCA_WLAN_VENDOR_ATTR_CHAN_INFO_IFACE_MODE_MASK: |
| 11427 |
* u32 attribute, required. Indicates all the interface types for which this |
| 11428 |
* channel is usable. This attribute encapsulates bitmasks of interface types |
| 11429 |
* defined in enum nl80211_iftype. |
| 11430 |
* |
| 11431 |
*/ |
| 11432 |
enum qca_wlan_vendor_attr_chan_info { |
| 11433 |
QCA_WLAN_VENDOR_ATTR_CHAN_INFO_INVALID = 0, |
| 11434 |
QCA_WLAN_VENDOR_ATTR_CHAN_INFO_PRIMARY_FREQ = 1, |
| 11435 |
QCA_WLAN_VENDOR_ATTR_CHAN_INFO_SEG0_FREQ = 2, |
| 11436 |
QCA_WLAN_VENDOR_ATTR_CHAN_INFO_SEG1_FREQ = 3, |
| 11437 |
QCA_WLAN_VENDOR_ATTR_CHAN_INFO_BANDWIDTH = 4, |
| 11438 |
QCA_WLAN_VENDOR_ATTR_CHAN_INFO_IFACE_MODE_MASK = 5, |
| 11439 |
|
| 11440 |
/* keep last */ |
| 11441 |
QCA_WLAN_VENDOR_ATTR_CHAN_INFO_AFTER_LAST, |
| 11442 |
QCA_WLAN_VENDOR_ATTR_CHAN_INFO_MAX = |
| 11443 |
QCA_WLAN_VENDOR_ATTR_CHAN_INFO_AFTER_LAST - 1, |
| 11444 |
}; |
| 11445 |
|
| 11446 |
/** |
| 11447 |
* enum qca_wlan_vendor_attr_usable_channels - Attributes used by |
| 11448 |
* %QCA_NL80211_VENDOR_SUBCMD_USABLE_CHANNELS vendor command. |
| 11449 |
* |
| 11450 |
* @QCA_WLAN_VENDOR_ATTR_USABLE_CHANNELS_BAND_MASK: |
| 11451 |
* u32 attribute. Indicates the bands from which the channels should be reported |
| 11452 |
* in response. This attribute encapsulates bit masks of bands defined in enum |
| 11453 |
* nl80211_band. Optional attribute, if not present in the request the driver |
| 11454 |
* shall return channels from all supported bands. |
| 11455 |
* |
| 11456 |
* @QCA_WLAN_VENDOR_ATTR_USABLE_CHANNELS_IFACE_MODE_MASK: |
| 11457 |
* u32 attribute. Indicates all the interface types for which the usable |
| 11458 |
* channels information is requested. This attribute encapsulates bitmasks of |
| 11459 |
* interface types defined in enum nl80211_iftype. Optional attribute, if not |
| 11460 |
* present in the request the driver shall send information of all supported |
| 11461 |
* interface modes. |
| 11462 |
* |
| 11463 |
* @QCA_WLAN_VENDOR_ATTR_USABLE_CHANNELS_FILTER_MASK: |
| 11464 |
* u32 attribute. This attribute carries information of all filters that shall |
| 11465 |
* be applied while populating usable channels information by the driver. This |
| 11466 |
* attribute carries bit masks of different filters defined in enum |
| 11467 |
* qca_wlan_vendor_usable_channels_filter. Optional attribute, if not present |
| 11468 |
* in the request the driver shall send information of channels without applying |
| 11469 |
* any of the filters that can be configured through this attribute. |
| 11470 |
* |
| 11471 |
* @QCA_WLAN_VENDOR_ATTR_USABLE_CHANNELS_CHAN_INFO: |
| 11472 |
* Nested attribute. This attribute shall be used by the driver to send |
| 11473 |
* usability information of each channel. The attributes defined in enum |
| 11474 |
* qca_wlan_vendor_attr_chan_info are used inside this attribute. |
| 11475 |
*/ |
| 11476 |
enum qca_wlan_vendor_attr_usable_channels { |
| 11477 |
QCA_WLAN_VENDOR_ATTR_USABLE_CHANNELS_INVALID = 0, |
| 11478 |
QCA_WLAN_VENDOR_ATTR_USABLE_CHANNELS_BAND_MASK = 1, |
| 11479 |
QCA_WLAN_VENDOR_ATTR_USABLE_CHANNELS_IFACE_MODE_MASK = 2, |
| 11480 |
QCA_WLAN_VENDOR_ATTR_USABLE_CHANNELS_FILTER_MASK = 3, |
| 11481 |
QCA_WLAN_VENDOR_ATTR_USABLE_CHANNELS_CHAN_INFO = 4, |
| 11482 |
|
| 11483 |
/* keep last */ |
| 11484 |
QCA_WLAN_VENDOR_ATTR_USABLE_CHANNELS_AFTER_LAST, |
| 11485 |
QCA_WLAN_VENDOR_ATTR_USABLE_CHANNELS_MAX = |
| 11486 |
QCA_WLAN_VENDOR_ATTR_USABLE_CHANNELS_AFTER_LAST - 1, |
| 11487 |
}; |
| 11488 |
|
| 11489 |
/** |
| 11490 |
* enum qca_wlan_vendor_attr_radar_history: Used by the vendor command |
| 11491 |
* QCA_NL80211_VENDOR_SUBCMD_GET_RADAR_HISTORY to get DFS radar history. |
| 11492 |
* |
| 11493 |
* @QCA_WLAN_VENDOR_ATTR_RADAR_HISTORY_ENTRIES: Nested attribute to carry |
| 11494 |
* the list of radar history entries. |
| 11495 |
* Each entry contains freq, timestamp, and radar signal detect flag. |
| 11496 |
* The driver shall add an entry when CAC has finished, or radar signal |
| 11497 |
* has been detected post AP beaconing. The driver shall maintain at least |
| 11498 |
* 8 entries in order to save CAC result for a 160 MHz channel. |
| 11499 |
* @QCA_WLAN_VENDOR_ATTR_RADAR_HISTORY_FREQ: u32 attribute. |
| 11500 |
* Channel frequency in MHz. |
| 11501 |
* @QCA_WLAN_VENDOR_ATTR_RADAR_HISTORY_TIMESTAMP: u64 nanoseconds. |
| 11502 |
* CLOCK_BOOTTIME timestamp when this entry is updated due to CAC |
| 11503 |
* or radar detection. |
| 11504 |
* @QCA_WLAN_VENDOR_ATTR_RADAR_HISTORY_DETECTED: NLA_FLAG attribute. |
| 11505 |
* This flag indicates radar signal has been detected. |
| 11506 |
*/ |
| 11507 |
enum qca_wlan_vendor_attr_radar_history { |
| 11508 |
QCA_WLAN_VENDOR_ATTR_RADAR_HISTORY_INVALID = 0, |
| 11509 |
|
| 11510 |
QCA_WLAN_VENDOR_ATTR_RADAR_HISTORY_ENTRIES = 1, |
| 11511 |
QCA_WLAN_VENDOR_ATTR_RADAR_HISTORY_FREQ = 2, |
| 11512 |
QCA_WLAN_VENDOR_ATTR_RADAR_HISTORY_TIMESTAMP = 3, |
| 11513 |
QCA_WLAN_VENDOR_ATTR_RADAR_HISTORY_DETECTED = 4, |
| 11514 |
|
| 11515 |
/* keep last */ |
| 11516 |
QCA_WLAN_VENDOR_ATTR_RADAR_HISTORY_LAST, |
| 11517 |
QCA_WLAN_VENDOR_ATTR_RADAR_HISTORY_MAX = |
| 11518 |
QCA_WLAN_VENDOR_ATTR_RADAR_HISTORY_LAST - 1, |
| 11519 |
}; |
| 11520 |
|
| 11521 |
/** |
| 11522 |
* enum qca_wlan_vendor_attr_mdns_offload - Attributes used by |
| 11523 |
* %QCA_NL80211_VENDOR_SUBCMD_MDNS_OFFLOAD vendor command. |
| 11524 |
* |
| 11525 |
* @QCA_WLAN_VENDOR_ATTR_MDNS_OFFLOAD_ENABLE: Required (flag) |
| 11526 |
* Enable mDNS offload. This attribute is mandatory to enable |
| 11527 |
* mDNS offload feature. If this attribute is not present, mDNS offload |
| 11528 |
* is disabled. |
| 11529 |
* |
| 11530 |
* @QCA_WLAN_VENDOR_ATTR_MDNS_OFFLOAD_TABLE: Nested attribute containing |
| 11531 |
* one or more %QCA_WLAN_VENDOR_ATTR_MDNS_OFFLOAD_ENTRY attributes. This |
| 11532 |
* attribute is mandatory when enabling the feature, and not required when |
| 11533 |
* disabling the feature. |
| 11534 |
* |
| 11535 |
* @QCA_WLAN_VENDOR_ATTR_MDNS_OFFLOAD_ENTRY: Nested attribute containing |
| 11536 |
* the following attributes: |
| 11537 |
* %QCA_WLAN_VENDOR_ATTR_MDNS_OFFLOAD_FQDN |
| 11538 |
* %QCA_WLAN_VENDOR_ATTR_MDNS_OFFLOAD_ANSWER_RESOURCE_RECORDS_COUNT |
| 11539 |
* %QCA_WLAN_VENDOR_ATTR_MDNS_OFFLOAD_ANSWER_PAYLOAD |
| 11540 |
* |
| 11541 |
* @QCA_WLAN_VENDOR_ATTR_MDNS_OFFLOAD_FQDN: Required string attribute. |
| 11542 |
* It consists of a hostname and ".local" as the domain name. The character |
| 11543 |
* set is limited to UTF-8 encoding. The maximum allowed size is 63 bytes. |
| 11544 |
* It is used to compare the domain in the "QU" query. Only 1 FQDN is |
| 11545 |
* supported per vdev. |
| 11546 |
* For example: myphone.local |
| 11547 |
* |
| 11548 |
* @QCA_WLAN_VENDOR_ATTR_MDNS_OFFLOAD_ANSWER_RESOURCE_RECORDS_COUNT: Required |
| 11549 |
* u16 attribute. It specifies the total number of resource records present |
| 11550 |
* in the answer section of the answer payload. This attribute is needed by the |
| 11551 |
* firmware to populate the mDNS response frame for mDNS queries without having |
| 11552 |
* to parse the answer payload. |
| 11553 |
* |
| 11554 |
* @QCA_WLAN_VENDOR_ATTR_MDNS_OFFLOAD_ANSWER_PAYLOAD: Required binary blob |
| 11555 |
* attribute sent by the mdnsResponder from userspace. It contains resource |
| 11556 |
* records of various types (e.g., A, AAAA, PTR, TXT) and service list. This |
| 11557 |
* payload is passed down to the firmware and is transmitted in response to |
| 11558 |
* mDNS queries. |
| 11559 |
* The maximum supported size of the answer payload is 512 bytes. |
| 11560 |
*/ |
| 11561 |
enum qca_wlan_vendor_attr_mdns_offload { |
| 11562 |
QCA_WLAN_VENDOR_ATTR_MDNS_OFFLOAD_INVALID = 0, |
| 11563 |
QCA_WLAN_VENDOR_ATTR_MDNS_OFFLOAD_ENABLE = 1, |
| 11564 |
QCA_WLAN_VENDOR_ATTR_MDNS_OFFLOAD_TABLE = 2, |
| 11565 |
QCA_WLAN_VENDOR_ATTR_MDNS_OFFLOAD_ENTRY = 3, |
| 11566 |
QCA_WLAN_VENDOR_ATTR_MDNS_OFFLOAD_FQDN = 4, |
| 11567 |
QCA_WLAN_VENDOR_ATTR_MDNS_OFFLOAD_ANSWER_RESOURCE_RECORDS_COUNT = 5, |
| 11568 |
QCA_WLAN_VENDOR_ATTR_MDNS_OFFLOAD_ANSWER_PAYLOAD = 6, |
| 11569 |
|
| 11570 |
/* keep last */ |
| 11571 |
QCA_WLAN_VENDOR_ATTR_MDNS_OFFLOAD_AFTER_LAST, |
| 11572 |
QCA_WLAN_VENDOR_ATTR_MDNS_OFFLOAD_MAX = |
| 11573 |
QCA_WLAN_VENDOR_ATTR_MDNS_OFFLOAD_AFTER_LAST - 1, |
| 11574 |
}; |
| 11575 |
|
| 11576 |
/** |
| 11577 |
* qca_wlan_vendor_monitor_data_frame_type - Represent the various |
| 11578 |
* Data frame types to be sent over the monitor interface. |
| 11579 |
*/ |
| 11580 |
enum qca_wlan_vendor_monitor_data_frame_type { |
| 11581 |
QCA_WLAN_VENDOR_MONITOR_DATA_FRAME_TYPE_ALL = BIT(0), |
| 11582 |
/* valid only if QCA_WLAN_VENDOR_MONITOR_DATA_FRAME_TYPE_ALL is not set |
| 11583 |
*/ |
| 11584 |
QCA_WLAN_VENDOR_MONITOR_DATA_FRAME_TYPE_ARP = BIT(1), |
| 11585 |
QCA_WLAN_VENDOR_MONITOR_DATA_FRAME_TYPE_DHCPV4 = BIT(2), |
| 11586 |
QCA_WLAN_VENDOR_MONITOR_DATA_FRAME_TYPE_DHCPV6 = BIT(3), |
| 11587 |
QCA_WLAN_VENDOR_MONITOR_DATA_FRAME_TYPE_EAPOL = BIT(4), |
| 11588 |
QCA_WLAN_VENDOR_MONITOR_DATA_FRAME_TYPE_DNSV4 = BIT(5), |
| 11589 |
QCA_WLAN_VENDOR_MONITOR_DATA_FRAME_TYPE_DNSV6 = BIT(6), |
| 11590 |
QCA_WLAN_VENDOR_MONITOR_DATA_FRAME_TYPE_TCP_SYN = BIT(7), |
| 11591 |
QCA_WLAN_VENDOR_MONITOR_DATA_FRAME_TYPE_TCP_SYNACK = BIT(8), |
| 11592 |
QCA_WLAN_VENDOR_MONITOR_DATA_FRAME_TYPE_TCP_FIN = BIT(9), |
| 11593 |
QCA_WLAN_VENDOR_MONITOR_DATA_FRAME_TYPE_TCP_FINACK = BIT(10), |
| 11594 |
QCA_WLAN_VENDOR_MONITOR_DATA_FRAME_TYPE_TCP_ACK = BIT(11), |
| 11595 |
QCA_WLAN_VENDOR_MONITOR_DATA_FRAME_TYPE_TCP_RST = BIT(12), |
| 11596 |
QCA_WLAN_VENDOR_MONITOR_DATA_FRAME_TYPE_ICMPV4 = BIT(13), |
| 11597 |
QCA_WLAN_VENDOR_MONITOR_DATA_FRAME_TYPE_ICMPV6 = BIT(14), |
| 11598 |
QCA_WLAN_VENDOR_MONITOR_DATA_FRAME_TYPE_RTP = BIT(15), |
| 11599 |
QCA_WLAN_VENDOR_MONITOR_DATA_FRAME_TYPE_SIP = BIT(16), |
| 11600 |
QCA_WLAN_VENDOR_MONITOR_DATA_FRAME_QOS_NULL = BIT(17), |
| 11601 |
}; |
| 11602 |
|
| 11603 |
/** |
| 11604 |
* qca_wlan_vendor_monitor_mgmt_frame_type - Represent the various |
| 11605 |
* Management frame types to be sent over the monitor interface. |
| 11606 |
* @QCA_WLAN_VENDOR_MONITOR_MGMT_FRAME_TYPE_ALL: All the Management Frames. |
| 11607 |
* @QCA_WLAN_VENDOR_MONITOR_MGMT_CONNECT_NO_BEACON: All the Management frames |
| 11608 |
* except the Beacon frame. |
| 11609 |
* @QCA_WLAN_VENDOR_MONITOR_MGMT_CONNECT_BEACON: Only the connected |
| 11610 |
* BSSID Beacon frames. Valid only in the connected state. |
| 11611 |
* @QCA_WLAN_VENDOR_MONITOR_MGMT_CONNECT_SCAN_BEACON: Represents |
| 11612 |
* the Beacon frames obtained during the scan (off channel and connected |
| 11613 |
* channel), when in connected state. |
| 11614 |
*/ |
| 11615 |
|
| 11616 |
enum qca_wlan_vendor_monitor_mgmt_frame_type { |
| 11617 |
QCA_WLAN_VENDOR_MONITOR_MGMT_FRAME_TYPE_ALL = BIT(0), |
| 11618 |
/* valid only if QCA_WLAN_VENDOR_MONITOR_MGMT_FRAME_TYPE_ALL is not set |
| 11619 |
*/ |
| 11620 |
QCA_WLAN_VENDOR_MONITOR_MGMT_NO_BEACON = BIT(1), |
| 11621 |
QCA_WLAN_VENDOR_MONITOR_MGMT_CONNECT_BEACON = BIT(2), |
| 11622 |
QCA_WLAN_VENDOR_MONITOR_MGMT_CONNECT_SCAN_BEACON = BIT(3), |
| 11623 |
}; |
| 11624 |
|
| 11625 |
/** |
| 11626 |
* qca_wlan_vendor_monitor_ctrl_frame_type - Represent the various |
| 11627 |
* Control frame types to be sent over the monitor interface. |
| 11628 |
* @QCA_WLAN_VENDOR_MONITOR_CTRL_FRAME_TYPE_ALL: All the Control frames |
| 11629 |
* @QCA_WLAN_VENDOR_MONITOR_CTRL_TRIGGER_FRAME: Trigger frame |
| 11630 |
*/ |
| 11631 |
enum qca_wlan_vendor_monitor_ctrl_frame_type { |
| 11632 |
QCA_WLAN_VENDOR_MONITOR_CTRL_FRAME_TYPE_ALL = BIT(0), |
| 11633 |
/* valid only if QCA_WLAN_VENDOR_MONITOR_CTRL_FRAME_TYPE_ALL is not set |
| 11634 |
*/ |
| 11635 |
QCA_WLAN_VENDOR_MONITOR_CTRL_TRIGGER_FRAME = BIT(1), |
| 11636 |
}; |
| 11637 |
|
| 11638 |
/** |
| 11639 |
* enum qca_wlan_vendor_attr_set_monitor_mode - Used by the |
| 11640 |
* vendor command QCA_NL80211_VENDOR_SUBCMD_SET_MONITOR_MODE to set the |
| 11641 |
* monitor mode. |
| 11642 |
* |
| 11643 |
* @QCA_WLAN_VENDOR_ATTR_SET_MONITOR_MODE_DATA_TX_FRAME_TYPE: u32 attribute. |
| 11644 |
* Represents the TX Data frame types to be monitored (u32). These Data frames |
| 11645 |
* are represented by enum qca_wlan_vendor_monitor_data_frame_type. |
| 11646 |
* |
| 11647 |
* @QCA_WLAN_VENDOR_ATTR_SET_MONITOR_MODE_DATA_RX_FRAME_TYPE: u32 attribute. |
| 11648 |
* Represents the RX Data frame types to be monitored (u32). These Data frames |
| 11649 |
* are represented by enum qca_wlan_vendor_monitor_data_frame_type. |
| 11650 |
* |
| 11651 |
* @QCA_WLAN_VENDOR_ATTR_SET_MONITOR_MODE_MGMT_TX_FRAME_TYPE: u32 attribute. |
| 11652 |
* Represents the TX Management frame types to be monitored (u32). These |
| 11653 |
* Management frames are represented by |
| 11654 |
* enum qca_wlan_vendor_monitor_mgmt_frame_type. |
| 11655 |
* |
| 11656 |
* @QCA_WLAN_VENDOR_ATTR_SET_MONITOR_MODE_MGMT_RX_FRAME_TYPE: u32 attribute. |
| 11657 |
* Represents the RX Management frame types to be monitored (u32). These |
| 11658 |
* Management frames are represented by |
| 11659 |
* enum qca_wlan_vendor_monitor_mgmt_frame_type. |
| 11660 |
* |
| 11661 |
* @QCA_WLAN_VENDOR_ATTR_SET_MONITOR_MODE_CTRL_TX_FRAME_TYPE: u32 attribute. |
| 11662 |
* Represents the TX Control frame types to be monitored (u32). These Control |
| 11663 |
* frames are represented by enum qca_wlan_vendor_monitor_ctrl_frame_type. |
| 11664 |
* |
| 11665 |
* @QCA_WLAN_VENDOR_ATTR_SET_MONITOR_MODE_CTRL_RX_FRAME_TYPE: u32 attribute. |
| 11666 |
* Represents the RX Control frame types to be monitored (u32). These Control |
| 11667 |
* frames are represented by enum qca_wlan_vendor_monitor_ctrl_frame_type. |
| 11668 |
* |
| 11669 |
* @QCA_WLAN_VENDOR_ATTR_SET_MONITOR_MODE_CONNECTED_BEACON_INTERVAL: u32 |
| 11670 |
* attribute. |
| 11671 |
* Represents the interval in milliseconds only for the connected Beacon frames, |
| 11672 |
* expecting the connected BSS's Beacon frames to be sent on the monitor |
| 11673 |
* interface at this specific interval. |
| 11674 |
*/ |
| 11675 |
enum qca_wlan_vendor_attr_set_monitor_mode |
| 11676 |
{ |
| 11677 |
QCA_WLAN_VENDOR_ATTR_SET_MONITOR_MODE_INVALID = 0, |
| 11678 |
QCA_WLAN_VENDOR_ATTR_SET_MONITOR_MODE_DATA_TX_FRAME_TYPE = 1, |
| 11679 |
QCA_WLAN_VENDOR_ATTR_SET_MONITOR_MODE_DATA_RX_FRAME_TYPE = 2, |
| 11680 |
QCA_WLAN_VENDOR_ATTR_SET_MONITOR_MODE_MGMT_TX_FRAME_TYPE = 3, |
| 11681 |
QCA_WLAN_VENDOR_ATTR_SET_MONITOR_MODE_MGMT_RX_FRAME_TYPE = 4, |
| 11682 |
QCA_WLAN_VENDOR_ATTR_SET_MONITOR_MODE_CTRL_TX_FRAME_TYPE = 5, |
| 11683 |
QCA_WLAN_VENDOR_ATTR_SET_MONITOR_MODE_CTRL_RX_FRAME_TYPE = 6, |
| 11684 |
QCA_WLAN_VENDOR_ATTR_SET_MONITOR_MODE_CONNECTED_BEACON_INTERVAL = 7, |
| 11685 |
|
| 11686 |
/* keep last */ |
| 11687 |
QCA_WLAN_VENDOR_ATTR_SET_MONITOR_MODE_AFTER_LAST, |
| 11688 |
QCA_WLAN_VENDOR_ATTR_SET_MONITOR_MODE_MAX = |
| 11689 |
QCA_WLAN_VENDOR_ATTR_SET_MONITOR_MODE_AFTER_LAST - 1, |
| 11690 |
}; |
| 11691 |
|
| 11692 |
/** |
| 11693 |
* enum qca_wlan_vendor_roam_scan_state - Roam scan state flags. |
| 11694 |
* Bits will be set to 1 if the corresponding state is enabled. |
| 11695 |
* |
| 11696 |
* @QCA_VENDOR_WLAN_ROAM_SCAN_STATE_START: Scan Start. |
| 11697 |
* @QCA_VENDOR_WLAN_ROAM_SCAN_STATE_END: Scan end. |
| 11698 |
*/ |
| 11699 |
enum qca_wlan_vendor_roam_scan_state { |
| 11700 |
QCA_WLAN_VENDOR_ROAM_SCAN_STATE_START = BIT(0), |
| 11701 |
QCA_WLAN_VENDOR_ROAM_SCAN_STATE_END = BIT(1), |
| 11702 |
}; |
| 11703 |
|
| 11704 |
/** |
| 11705 |
* enum qca_wlan_vendor_roam_event_type - Roam event type flags. |
| 11706 |
* Bits will be set to 1 if the corresponding event is notified. |
| 11707 |
* |
| 11708 |
* @QCA_WLAN_VENDOR_ROAM_EVENT_TRIGGER_REASON: Represents that the roam event |
| 11709 |
* carries the trigger reason. When set, it is expected that the roam event |
| 11710 |
* carries the respective reason via the attribute |
| 11711 |
* QCA_WLAN_VENDOR_ATTR_ROAM_EVENTS_TRIGGER_REASON. This event also carries |
| 11712 |
* the BSSID, RSSI, frequency info of the AP to which the roam is attempted. |
| 11713 |
* |
| 11714 |
* @QCA_WLAN_VENDOR_ROAM_EVENT_FAIL_REASON: Represents that the roam event |
| 11715 |
* carries the roam fail reason. When set, it is expected that the roam event |
| 11716 |
* carries the respective reason via the attribute |
| 11717 |
* QCA_WLAN_VENDOR_ATTR_ROAM_EVENTS_FAIL_REASON. This event also carries the |
| 11718 |
* BSSID, RSSI, frequency info of the AP to which the roam was attempted. |
| 11719 |
* |
| 11720 |
* @QCA_WLAN_VENDOR_ROAM_EVENT_INVOKE_FAIL_REASON: Represents that the roam |
| 11721 |
* event carries the roam invoke fail reason. When set, it is expected that |
| 11722 |
* the roam event carries the respective reason via the attribute |
| 11723 |
* QCA_WLAN_VENDOR_ATTR_ROAM_EVENTS_INVOKE_FAIL_REASON. |
| 11724 |
* |
| 11725 |
* @QCA_WLAN_VENDOR_ROAM_EVENT_SCAN_STATE: Represents that the roam event |
| 11726 |
* carries the roam scan state. When set, it is expected that the roam event |
| 11727 |
* carries the respective scan state via the attribute |
| 11728 |
* QCA_WLAN_VENDOR_ATTR_ROAM_EVENTS_ROAM_SCAN_STATE and the corresponding |
| 11729 |
* frequency info via QCA_WLAN_VENDOR_ATTR_ROAM_EVENTS_ROAM_SCAN_FREQ_LIST. |
| 11730 |
*/ |
| 11731 |
enum qca_wlan_vendor_roam_event_type { |
| 11732 |
QCA_WLAN_VENDOR_ROAM_EVENT_TRIGGER_REASON = BIT(0), |
| 11733 |
QCA_WLAN_VENDOR_ROAM_EVENT_FAIL_REASON = BIT(1), |
| 11734 |
QCA_WLAN_VENDOR_ROAM_EVENT_INVOKE_FAIL_REASON = BIT(2), |
| 11735 |
QCA_WLAN_VENDOR_ROAM_EVENT_ROAM_SCAN_STATE = BIT(3), |
| 11736 |
}; |
| 11737 |
|
| 11738 |
/** |
| 11739 |
* enum qca_wlan_vendor_attr_roam_events_candidate_info: Roam candidate info. |
| 11740 |
* Referred by QCA_WLAN_VENDOR_ATTR_ROAM_EVENTS_CANDIDATE_INFO. |
| 11741 |
* |
| 11742 |
* @QCA_WLAN_VENDOR_ATTR_ROAM_EVENTS_CANDIDATE_INFO_BSSID: 6-byte MAC address |
| 11743 |
* representing the BSSID of the AP to which the roam is attempted. |
| 11744 |
* |
| 11745 |
* @QCA_WLAN_VENDOR_ATTR_ROAM_EVENTS_CANDIDATE_INFO_RSSI: Signed 32-bit value |
| 11746 |
* in dBm, signifying the RSSI of the candidate BSSID to which the Roaming is |
| 11747 |
* attempted. |
| 11748 |
* |
| 11749 |
* @QCA_WLAN_VENDOR_ATTR_ROAM_EVENTS_CANDIDATE_INFO_FREQ: u32, frequency in MHz |
| 11750 |
* on which the roam is attempted. |
| 11751 |
* |
| 11752 |
* @QCA_WLAN_VENDOR_ATTR_ROAM_EVENTS_CANDIDATE_INFO_FAIL_REASON: u32, used in |
| 11753 |
* STA mode only. This represents the roam fail reason for the last failed |
| 11754 |
* roaming attempt by the firmware for the specific BSSID. Different roam |
| 11755 |
* failure reason codes are specified in enum qca_vendor_roam_fail_reasons. |
| 11756 |
*/ |
| 11757 |
enum qca_wlan_vendor_attr_roam_events_candidate_info { |
| 11758 |
QCA_WLAN_VENDOR_ATTR_ROAM_EVENTS_CANDIDATE_INFO_INVALID = 0, |
| 11759 |
QCA_WLAN_VENDOR_ATTR_ROAM_EVENTS_CANDIDATE_INFO_BSSID = 1, |
| 11760 |
QCA_WLAN_VENDOR_ATTR_ROAM_EVENTS_CANDIDATE_INFO_RSSI = 2, |
| 11761 |
QCA_WLAN_VENDOR_ATTR_ROAM_EVENTS_CANDIDATE_INFO_FREQ = 3, |
| 11762 |
QCA_WLAN_VENDOR_ATTR_ROAM_EVENTS_CANDIDATE_INFO_FAIL_REASON = 4, |
| 11763 |
|
| 11764 |
/* keep last */ |
| 11765 |
QCA_WLAN_VENDOR_ATTR_ROAM_EVENTS_CANDIDATE_INFO_AFTER_LAST, |
| 11766 |
QCA_WLAN_VENDOR_ATTR_ROAM_EVENTS_CANDIDATE_INFO_MAX = |
| 11767 |
QCA_WLAN_VENDOR_ATTR_ROAM_EVENTS_CANDIDATE_INFO_AFTER_LAST - 1, |
| 11768 |
}; |
| 11769 |
|
| 11770 |
/** |
| 11771 |
* enum qca_wlan_vendor_attr_roam_events - Used by the |
| 11772 |
* vendor command QCA_NL80211_VENDOR_SUBCMD_ROAM_EVENTS to either configure the |
| 11773 |
* roam events to the driver or notify these events from the driver. |
| 11774 |
* |
| 11775 |
* @QCA_WLAN_VENDOR_ATTR_ROAM_EVENTS_CONFIGURE: u8 attribute. Configures the |
| 11776 |
* driver/firmware to enable/disable the notification of roam events. It's a |
| 11777 |
* mandatory attribute and used only in the request from the userspace to the |
| 11778 |
* host driver. 1-Enable, 0-Disable. |
| 11779 |
* If the roaming is totally offloaded to the firmware, this request when |
| 11780 |
* enabled shall mandate the firmware to notify all the relevant roam events |
| 11781 |
* represented by the below attributes. If the host is in the suspend mode, |
| 11782 |
* the behavior of the firmware to notify these events is guided by |
| 11783 |
* QCA_WLAN_VENDOR_ATTR_ROAM_EVENTS_DEVICE_STATE, and if the request is to get |
| 11784 |
* these events in the suspend state, the firmware is expected to wake up the |
| 11785 |
* host before the respective events are notified. Please note that such a |
| 11786 |
* request to get the events in the suspend state will have a definite power |
| 11787 |
* implication. |
| 11788 |
* |
| 11789 |
* @QCA_WLAN_VENDOR_ATTR_ROAM_EVENTS_SUSPEND_STATE: flag attribute. Represents |
| 11790 |
* that the roam events need to be notified in the suspend state too. By |
| 11791 |
* default, these roam events are notified in the resume state. With this flag, |
| 11792 |
* the roam events are notified in both resume and suspend states. |
| 11793 |
* This attribute is used in the request from the userspace to the host driver. |
| 11794 |
* |
| 11795 |
* @QCA_WLAN_VENDOR_ATTR_ROAM_EVENTS_TYPE: u32, used in STA mode only. |
| 11796 |
* Represents the different roam event types, signified by the enum |
| 11797 |
* qca_wlan_vendor_roam_event_type. |
| 11798 |
* Each bit of this attribute represents the different roam even types reported |
| 11799 |
* through QCA_NL80211_VENDOR_SUBCMD_ROAM_EVENTS. |
| 11800 |
* This is sent as an event through QCA_NL80211_VENDOR_SUBCMD_ROAM_EVENTS. |
| 11801 |
* |
| 11802 |
* @QCA_WLAN_VENDOR_ATTR_ROAM_EVENTS_TRIGGER_REASON: u32, used in STA |
| 11803 |
* mode only. This represents the roam trigger reason for the last roaming |
| 11804 |
* attempted by the firmware. Each bit of this attribute represents the |
| 11805 |
* different roam trigger reason code which are defined in enum |
| 11806 |
* qca_vendor_roam_triggers. |
| 11807 |
* This is sent as an event through QCA_NL80211_VENDOR_SUBCMD_ROAM_EVENTS. |
| 11808 |
* |
| 11809 |
* @QCA_WLAN_VENDOR_ATTR_ROAM_EVENTS_INVOKE_FAIL_REASON: u32, used in |
| 11810 |
* STA mode only. This represents the roam invoke fail reason for the last |
| 11811 |
* failed roam invoke. Different roam invoke failure reason codes |
| 11812 |
* are specified in enum qca_vendor_roam_invoke_fail_reasons. |
| 11813 |
* |
| 11814 |
* @QCA_WLAN_VENDOR_ATTR_ROAM_EVENTS_CANDIDATE_INFO: Array of candidates info |
| 11815 |
* for which the roam is attempted. Each entry is a nested attribute defined |
| 11816 |
* by enum qca_wlan_vendor_attr_roam_events_candidate_info. |
| 11817 |
* This is sent as an event through QCA_NL80211_VENDOR_SUBCMD_ROAM_EVENTS. |
| 11818 |
* |
| 11819 |
* @QCA_WLAN_VENDOR_ATTR_ROAM_EVENTS_ROAM_SCAN_STATE: u8 attribute. Represents |
| 11820 |
* the scan state on which the roam events need to be notified. The values for |
| 11821 |
* this attribute are referred from enum qca_wlan_vendor_roam_scan_state. |
| 11822 |
* This is sent as an event through QCA_NL80211_VENDOR_SUBCMD_ROAM_EVENTS. |
| 11823 |
* |
| 11824 |
* @QCA_WLAN_VENDOR_ATTR_ROAM_EVENTS_ROAM_SCAN_FREQ_LIST: Nested attribute of |
| 11825 |
* u32 values. List of frequencies in MHz considered for a roam scan. |
| 11826 |
* This is sent as an event through QCA_NL80211_VENDOR_SUBCMD_ROAM_EVENTS. |
| 11827 |
*/ |
| 11828 |
|
| 11829 |
enum qca_wlan_vendor_attr_roam_events |
| 11830 |
{ |
| 11831 |
QCA_WLAN_VENDOR_ATTR_ROAM_EVENTS_INVALID = 0, |
| 11832 |
QCA_WLAN_VENDOR_ATTR_ROAM_EVENTS_CONFIGURE = 1, |
| 11833 |
QCA_WLAN_VENDOR_ATTR_ROAM_EVENTS_SUSPEND_STATE = 2, |
| 11834 |
QCA_WLAN_VENDOR_ATTR_ROAM_EVENTS_TYPE = 3, |
| 11835 |
QCA_WLAN_VENDOR_ATTR_ROAM_EVENTS_TRIGGER_REASON = 4, |
| 11836 |
QCA_WLAN_VENDOR_ATTR_ROAM_EVENTS_INVOKE_FAIL_REASON = 5, |
| 11837 |
QCA_WLAN_VENDOR_ATTR_ROAM_EVENTS_CANDIDATE_INFO = 6, |
| 11838 |
QCA_WLAN_VENDOR_ATTR_ROAM_EVENTS_ROAM_SCAN_STATE = 7, |
| 11839 |
QCA_WLAN_VENDOR_ATTR_ROAM_EVENTS_ROAM_SCAN_FREQ_LIST = 8, |
| 11840 |
|
| 11841 |
/* keep last */ |
| 11842 |
QCA_WLAN_VENDOR_ATTR_ROAM_EVENTS_AFTER_LAST, |
| 11843 |
QCA_WLAN_VENDOR_ATTR_ROAM_EVENTS_MAX = |
| 11844 |
QCA_WLAN_VENDOR_ATTR_ROAM_EVENTS_AFTER_LAST -1, |
| 11845 |
}; |
| 11846 |
|
| 11847 |
#endif /* QCA_VENDOR_H */ |