| 1 |
% Copyright 2019 by Till Tantau |
| 2 |
% |
| 3 |
% This file may be distributed and/or modified |
| 4 |
% |
| 5 |
% 1. under the LaTeX Project Public License and/or |
| 6 |
% 2. under the GNU Free Documentation License. |
| 7 |
% |
| 8 |
% See the file doc/generic/pgf/licenses/LICENSE for more details. |
| 9 |
|
| 10 |
|
| 11 |
\section{Transparency} |
| 12 |
\label{section-tikz-transparency} |
| 13 |
|
| 14 |
\subsection{Overview} |
| 15 |
|
| 16 |
Normally, when you paint something using any of \tikzname's commands (this |
| 17 |
includes stroking, filling, shading, patterns, and images), the newly painted |
| 18 |
objects totally obscure whatever was painted earlier in the same area. |
| 19 |
|
| 20 |
You can change this behavior by using something that can be thought of as |
| 21 |
``(semi)transparent colors''. Such colors do not completely obscure the |
| 22 |
background, rather they blend the background with the new color. At first |
| 23 |
sight, using such semitransparent colors might seem quite straightforward, but |
| 24 |
the math going on in the background is quite involved and the correct handling |
| 25 |
of transparency fills some 64 pages in the PDF specification. |
| 26 |
|
| 27 |
In the present section, we start with the different ways of specifying ``how |
| 28 |
transparent'' newly drawn objects should be. The simplest way is to just |
| 29 |
specify a percentage like ``60\% transparent''. A much more general way is to |
| 30 |
use something that I call a \emph{fading}, also known as a soft mask or a mask. |
| 31 |
|
| 32 |
At the end of the section we address the problem of creating so-called |
| 33 |
\emph{transparency groups}. This problem arises when you paint over a position |
| 34 |
several times with a semitransparent color. Sometimes you want the effect to |
| 35 |
accumulate, sometimes you do not. |
| 36 |
|
| 37 |
\emph{Note:} Transparency (or Opacity, as it may be called as well) is best |
| 38 |
supported by the pdf\TeX\ driver. The \textsc{svg} driver also has some |
| 39 |
support. The PostScript file format does not know about transparency. In |
| 40 |
|dvips|-generated PostScript files, transparency of graphic objects is defined |
| 41 |
through special commands that need further processing to become visible in the |
| 42 |
\textsc{pdf} output. For this, a recent version of Ghostscript, preferably 9.52 |
| 43 |
or newer, is required and its command line utility |ps2pdf| must be called with |
| 44 |
option |-dALLOWPSTRANSPARENCY|. Older versions may need option |-dNOSAFER| |
| 45 |
instead, but some advanced features, such as \emph{transparency groups} and |
| 46 |
\emph{fadings}, may not work at all. Printers and other programs will typically |
| 47 |
ignore opacity settings in PostScript files. |
| 48 |
|
| 49 |
|
| 50 |
\subsection{Specifying a Uniform Opacity} |
| 51 |
|
| 52 |
Specifying a stroke and/or fill opacity is quite easy using the following |
| 53 |
options. |
| 54 |
|
| 55 |
\begin{key}{/tikz/draw opacity=\meta{value}} |
| 56 |
This option sets ``how transparent'' lines should be. A value of |1| means |
| 57 |
``fully opaque'' or ``not transparent at all'', a value of |0| means |
| 58 |
``fully transparent'' or ``invisible''. A value of |0.5| yields lines that |
| 59 |
are semitransparent. |
| 60 |
|
| 61 |
Note that when you use PostScript as your output format, this option works |
| 62 |
only with recent versions of Ghostscript. |
| 63 |
% |
| 64 |
\begin{codeexample}[] |
| 65 |
\begin{tikzpicture}[line width=1ex] |
| 66 |
\draw (0,0) -- (3,1); |
| 67 |
\filldraw [fill=yellow!80!black,draw opacity=0.5] (1,0) rectangle (2,1); |
| 68 |
\end{tikzpicture} |
| 69 |
\end{codeexample} |
| 70 |
% |
| 71 |
\end{key} |
| 72 |
|
| 73 |
Note that the |draw opacity| options only sets the opacity of drawn lines. The |
| 74 |
opacity of fillings is set using the option |fill opacity| (documented in |
| 75 |
Section~\ref{section-fill-opacity}. The option |opacity| sets both at the same |
| 76 |
time. |
| 77 |
|
| 78 |
\begin{key}{/tikz/opacity=\meta{value}} |
| 79 |
Sets both the drawing and filling opacity to \meta{value}. |
| 80 |
|
| 81 |
The following predefined styles make it easier to use this option: |
| 82 |
% |
| 83 |
\begin{stylekey}{/tikz/transparent} |
| 84 |
Makes everything totally transparent and, hence, invisible. |
| 85 |
% |
| 86 |
\begin{codeexample}[] |
| 87 |
\tikz{\fill[red] (0,0) rectangle (1,0.5); |
| 88 |
\fill[transparent,red] (0.5,0) rectangle (1.5,0.25); } |
| 89 |
\end{codeexample} |
| 90 |
\end{stylekey} |
| 91 |
|
| 92 |
\begin{stylekey}{/tikz/ultra nearly transparent} |
| 93 |
Makes everything, well, ultra nearly transparent. |
| 94 |
% |
| 95 |
\begin{codeexample}[] |
| 96 |
\tikz{\fill[red] (0,0) rectangle (1,0.5); |
| 97 |
\fill[ultra nearly transparent] (0.5,0) rectangle (1.5,0.25); } |
| 98 |
\end{codeexample} |
| 99 |
\end{stylekey} |
| 100 |
|
| 101 |
\begin{stylekey}{/tikz/very nearly transparent} |
| 102 |
\begin{codeexample}[] |
| 103 |
\tikz{\fill[red] (0,0) rectangle (1,0.5); |
| 104 |
\fill[very nearly transparent] (0.5,0) rectangle (1.5,0.25); } |
| 105 |
\end{codeexample} |
| 106 |
\end{stylekey} |
| 107 |
|
| 108 |
\begin{stylekey}{/tikz/nearly transparent} |
| 109 |
\begin{codeexample}[] |
| 110 |
\tikz{\fill[red] (0,0) rectangle (1,0.5); |
| 111 |
\fill[nearly transparent] (0.5,0) rectangle (1.5,0.25); } |
| 112 |
\end{codeexample} |
| 113 |
\end{stylekey} |
| 114 |
|
| 115 |
\begin{stylekey}{/tikz/semitransparent} |
| 116 |
\begin{codeexample}[] |
| 117 |
\tikz{\fill[red] (0,0) rectangle (1,0.5); |
| 118 |
\fill[semitransparent] (0.5,0) rectangle (1.5,0.25); } |
| 119 |
\end{codeexample} |
| 120 |
\end{stylekey} |
| 121 |
|
| 122 |
\begin{stylekey}{/tikz/nearly opaque} |
| 123 |
\begin{codeexample}[] |
| 124 |
\tikz{\fill[red] (0,0) rectangle (1,0.5); |
| 125 |
\fill[nearly opaque] (0.5,0) rectangle (1.5,0.25); } |
| 126 |
\end{codeexample} |
| 127 |
\end{stylekey} |
| 128 |
|
| 129 |
\begin{stylekey}{/tikz/very nearly opaque} |
| 130 |
\begin{codeexample}[] |
| 131 |
\tikz{\fill[red] (0,0) rectangle (1,0.5); |
| 132 |
\fill[very nearly opaque] (0.5,0) rectangle (1.5,0.25); } |
| 133 |
\end{codeexample} |
| 134 |
\end{stylekey} |
| 135 |
|
| 136 |
\begin{stylekey}{/tikz/ultra nearly opaque} |
| 137 |
\begin{codeexample}[] |
| 138 |
\tikz{\fill[red] (0,0) rectangle (1,0.5); |
| 139 |
\fill[ultra nearly opaque] (0.5,0) rectangle (1.5,0.25); } |
| 140 |
\end{codeexample} |
| 141 |
\end{stylekey} |
| 142 |
|
| 143 |
\begin{stylekey}{/tikz/opaque} |
| 144 |
This yields completely opaque drawings, which is the default. |
| 145 |
% |
| 146 |
\begin{codeexample}[] |
| 147 |
\tikz{\fill[red] (0,0) rectangle (1,0.5); |
| 148 |
\fill[opaque] (0.5,0) rectangle (1.5,0.25); } |
| 149 |
\end{codeexample} |
| 150 |
\end{stylekey} |
| 151 |
\end{key} |
| 152 |
|
| 153 |
\begin{key}{/tikz/fill opacity=\meta{value}} |
| 154 |
This option sets the opacity of fillings. In addition to filling |
| 155 |
operations, this opacity also applies to text and images. |
| 156 |
|
| 157 |
Note, again, that when you use PostScript as your output format, this |
| 158 |
option works only with recent versions of Ghostscript. |
| 159 |
% |
| 160 |
\begin{codeexample}[] |
| 161 |
\begin{tikzpicture}[thick,fill opacity=0.5] |
| 162 |
\filldraw[fill=red] (0:1cm) circle (12mm); |
| 163 |
\filldraw[fill=green] (120:1cm) circle (12mm); |
| 164 |
\filldraw[fill=blue] (-120:1cm) circle (12mm); |
| 165 |
\end{tikzpicture} |
| 166 |
\end{codeexample} |
| 167 |
|
| 168 |
\begin{codeexample}[] |
| 169 |
\begin{tikzpicture} |
| 170 |
\fill[red] (0,0) rectangle (3,2); |
| 171 |
|
| 172 |
\node at (0,0) {\huge A}; |
| 173 |
\node[fill opacity=0.5] at (3,2) {\huge B}; |
| 174 |
\end{tikzpicture} |
| 175 |
\end{codeexample} |
| 176 |
% |
| 177 |
\end{key} |
| 178 |
|
| 179 |
\begin{key}{/tikz/text opacity=\meta{value}} |
| 180 |
Sets the opacity of text labels, overriding the |fill opacity| setting. |
| 181 |
% |
| 182 |
\begin{codeexample}[] |
| 183 |
\begin{tikzpicture}[every node/.style={fill,draw}] |
| 184 |
\draw[line width=2mm,blue!50,line cap=round] (0,0) grid (3,2); |
| 185 |
|
| 186 |
\node[opacity=0.5] at (1.5,2) {Upper node}; |
| 187 |
\node[draw opacity=0.8,fill opacity=0.2,text opacity=1] |
| 188 |
at (1.5,0) {Lower node}; |
| 189 |
\end{tikzpicture} |
| 190 |
\end{codeexample} |
| 191 |
% |
| 192 |
\end{key} |
| 193 |
|
| 194 |
Note the following effect: If you set up a certain opacity for stroking or |
| 195 |
filling and you stroke or fill the same area twice, the effect accumulates: |
| 196 |
% |
| 197 |
\begin{codeexample}[] |
| 198 |
\begin{tikzpicture}[fill opacity=0.5] |
| 199 |
\fill[red] (0,0) circle (1); |
| 200 |
\fill[red] (1,0) circle (1); |
| 201 |
\end{tikzpicture} |
| 202 |
\end{codeexample} |
| 203 |
|
| 204 |
Often, this is exactly what you intend, but not always. You can use |
| 205 |
transparency groups, see the end of this section, to change this. |
| 206 |
|
| 207 |
|
| 208 |
\subsection{Blend Modes} |
| 209 |
\label{section-blend-modes} |
| 210 |
|
| 211 |
A \emph{blend mode} specifies how colors mix when you paint on a canvas. |
| 212 |
Normally, if you paint a red box on a green circle, the red color will |
| 213 |
completely replace the green circle. However, in some situations you might also |
| 214 |
wish the red color to somehow ``mix'' or ``blend'' with the green circle. We |
| 215 |
already saw that, using transparency, we can draw something without completely |
| 216 |
obscuring the background. \emph{Blending} is a similar operation, only here we |
| 217 |
mix colors in more complicated ways. |
| 218 |
|
| 219 |
\emph{Note:} Blending is a rather ``advanced'' feature of \textsc{pdf}. Most |
| 220 |
renderers, let alone printers, will have trouble rendering blending correctly. |
| 221 |
|
| 222 |
\begin{key}{/tikz/blend mode=\meta{mode}} |
| 223 |
Sets the current blend mode to \meta{mode}. Here \meta{mode} must be one of |
| 224 |
the modes listed below. More details on these modes can also be found in |
| 225 |
Section~7.2.4 of the \textsc{pdf} Specification, version~1.7. |
| 226 |
|
| 227 |
In the following example, the blend mode is only used and set inside a |
| 228 |
transparency group (see also Section~\ref{section-transparency-groups}). |
| 229 |
This is because most renderers (viewing programs) have trouble rendering |
| 230 |
blending correctly otherwise. For instance, at the time of writing, the |
| 231 |
versions of Adobe's Reader and Apple's Preview render the following drawing |
| 232 |
very differently, if the transparency group is not used in the following |
| 233 |
example. |
| 234 |
% |
| 235 |
\begin{codeexample}[] |
| 236 |
\tikz { |
| 237 |
\begin{scope}[transparency group] |
| 238 |
\begin{scope}[blend mode=screen] |
| 239 |
\fill[red!90!black] ( 90:.6) circle (1); |
| 240 |
\fill[green!80!black] (210:.6) circle (1); |
| 241 |
\fill[blue!90!black] (330:.6) circle (1); |
| 242 |
\end{scope} |
| 243 |
\end{scope} |
| 244 |
} |
| 245 |
\end{codeexample} |
| 246 |
|
| 247 |
Because of the trouble with rendering blending correctly outside |
| 248 |
transparency groups, there is a special key that establishes a transparency |
| 249 |
group and sets a blend mode simultaneously: |
| 250 |
|
| 251 |
\begin{key}{/tikz/blend group=\meta{mode}} |
| 252 |
This key can only be used with a scope (like |transparency group|). It |
| 253 |
will cause the current scope to become a transparency group and, inside |
| 254 |
this group, the blend mode will be set to \meta{mode}. |
| 255 |
% |
| 256 |
\begin{codeexample}[] |
| 257 |
\tikz [blend group=screen] { |
| 258 |
\fill[red!90!black] ( 90:.6) circle (1); |
| 259 |
\fill[green!80!black] (210:.6) circle (1); |
| 260 |
\fill[blue!90!black] (330:.6) circle (1); |
| 261 |
} |
| 262 |
\end{codeexample} |
| 263 |
\end{key} |
| 264 |
|
| 265 |
Here is an overview of the effects of the different available blend modes. |
| 266 |
In the examples, we always have three circles drawn on top of each other |
| 267 |
(as in the example code earlier): We start with a triple of pure red, |
| 268 |
green, and blue. Below it, we have a triple of light versions of these |
| 269 |
three colors (|red!50|, |green!50|, and |blue!50|). Next comes the triple |
| 270 |
yellow, cyan, and magenta; again with a triple of light versions below it. |
| 271 |
The large example consists of three balls (produced using |ball color|) |
| 272 |
having the colors red, green, and blue, are drawn on top of each other just |
| 273 |
like the circles. |
| 274 |
|
| 275 |
\definecolor{rg}{rgb}{1,1,0} |
| 276 |
\definecolor{gb}{rgb}{0,1,1} |
| 277 |
\definecolor{br}{rgb}{1,0,1} |
| 278 |
|
| 279 |
\def\makeline#1#2#3{\leavevmode |
| 280 |
\hbox to 40mm{#1\hss}\ \hbox to |
| 281 |
20.5mm{#2\hss}\ \begin{minipage}[t]{88.5mm}\raggedright#3\end{minipage}\par |
| 282 |
\textcolor{black!25}{\hrule height1pt} |
| 283 |
} |
| 284 |
|
| 285 |
\def\showmode#1#2{ |
| 286 |
\makeline{ |
| 287 |
\tikz [blend mode=#1,baseline=-.5ex] { |
| 288 |
\fill[red] ( 90:.5em) circle (.75em); |
| 289 |
\fill[green] (210:.5em) circle (.75em); |
| 290 |
\fill[blue] (330:.5em) circle (.75em); |
| 291 |
\scoped[yshift=-2.5em]{ |
| 292 |
\fill[red!50] ( 90:.5em) circle (.75em); |
| 293 |
\fill[green!50] (210:.5em) circle (.75em); |
| 294 |
\fill[blue!50] (330:.5em) circle (.75em); |
| 295 |
} |
| 296 |
} |
| 297 |
\tikz [blend mode=#1,baseline=-.5ex] { |
| 298 |
\fill[rg] ( 90:.5em) circle (.75em); |
| 299 |
\fill[gb] (210:.5em) circle (.75em); |
| 300 |
\fill[br] (330:.5em) circle (.75em); |
| 301 |
\scoped[yshift=-2.5em]{ |
| 302 |
\fill[rg!50] ( 90:.5em) circle (.75em); |
| 303 |
\fill[gb!50] (210:.5em) circle (.75em); |
| 304 |
\fill[br!50] (330:.5em) circle (.75em); |
| 305 |
} |
| 306 |
} |
| 307 |
\tikz [blend mode=#1,baseline=-.5ex+1.25em] { |
| 308 |
\shade[ball color=red] ( 90:1em) circle (1.5em); |
| 309 |
\shade[ball color=green] (210:1em) circle (1.5em); |
| 310 |
\shade[ball color=blue] (330:1em) circle (1.5em); |
| 311 |
}}{\verb|#1|}{#2}% |
| 312 |
% this argument was changed from {|#1|} |
| 313 |
% --> see <https://sourceforge.net/p/pgf/bugs/486/> |
| 314 |
} |
| 315 |
|
| 316 |
\medskip |
| 317 |
\makeline{\emph{Example}}{\emph{Mode}}{\emph{Explanations quoted from |
| 318 |
Table~7.2 of the \textsc{pdf} Specification, Version~1.7}} |
| 319 |
\showmode{normal}{When painting a pixel with a some color (called the |
| 320 |
``source color''), the background color (called the ``backdrop'') is |
| 321 |
completely ignored.} |
| 322 |
\showmode{multiply}{Multiplies the backdrop and source color values. The |
| 323 |
result color is always at least as dark as either of the two |
| 324 |
constituent colors. Multiplying any color with black produces black; |
| 325 |
multiplying with white leaves the original color unchanged. Painting |
| 326 |
successive overlapping objects with a color other than black or white |
| 327 |
produces progressively darker colors.} |
| 328 |
\showmode{screen}{Multiplies the complements of the backdrop and source |
| 329 |
color values, then complements the result. The result color is always |
| 330 |
at least as light as either of the two constituent colors. Screening |
| 331 |
any color with white produces white; screening with black leaves the |
| 332 |
original color unchanged. The effect is similar to projecting multiple |
| 333 |
photographic slides simultaneously onto a single screen.} |
| 334 |
\showmode{overlay}{Multiplies or screens the colors, depending on the |
| 335 |
backdrop color value. Source colors overlay the backdrop while |
| 336 |
preserving its highlights and shadows. The backdrop color is not |
| 337 |
replaced but is mixed with the source color to reflect the lightness or |
| 338 |
darkness of the backdrop.} |
| 339 |
\showmode{darken}{Selects the darker of the backdrop and source colors. The |
| 340 |
backdrop is replaced with the source where the source is darker; |
| 341 |
otherwise, it is left unchanged.} |
| 342 |
\showmode{lighten}{Selects the lighter of the backdrop and source colors. |
| 343 |
The backdrop is replaced with the source where the source is lighter; |
| 344 |
otherwise, it is left unchanged.} |
| 345 |
\showmode{color dodge}{Brightens the backdrop color to reflect the source |
| 346 |
color. Painting with black produces no changes.} |
| 347 |
\showmode{color burn}{Darkens the backdrop color to reflect the source |
| 348 |
color. Painting with white produces no change.} |
| 349 |
\showmode{hard light}{Multiplies or screens the colors, depending on the |
| 350 |
source color value. The effect is similar to shining a harsh spotlight |
| 351 |
on the backdrop.} |
| 352 |
\showmode{soft light}{Darkens or lightens the colors, depending on the |
| 353 |
source color value. The effect is similar to shining a diffused |
| 354 |
spotlight on the backdrop.} |
| 355 |
\showmode{difference}{Subtracts the darker of the two constituent colors |
| 356 |
from the lighter color. Painting with white inverts the backdrop color; |
| 357 |
painting with black produces no change.} |
| 358 |
\showmode{exclusion}{Produces an effect similar to that of the Difference |
| 359 |
mode but lower in contrast. Painting with white inverts the backdrop |
| 360 |
color; painting with black produces no change.} |
| 361 |
\showmode{hue}{Creates a color with the hue of the source color and the |
| 362 |
saturation and luminosity of the backdrop color.} |
| 363 |
\showmode{saturation}{Creates a color with the saturation of the source |
| 364 |
color and the hue and luminosity of the backdrop color. Painting with |
| 365 |
this mode in an area of the backdrop that is a pure gray (no |
| 366 |
saturation) produces no change.} |
| 367 |
\showmode{color}{Creates a color with the hue and saturation of the source |
| 368 |
color and the luminosity of the backdrop color. This preserves the gray |
| 369 |
levels of the backdrop and is useful for coloring monochrome images or |
| 370 |
tinting color images.} |
| 371 |
\showmode{luminosity}{Creates a color with the luminosity of the source |
| 372 |
color and the hue and saturation of the backdrop color. This produces |
| 373 |
an inverse effect to that of the Color mode.} |
| 374 |
\end{key} |
| 375 |
|
| 376 |
|
| 377 |
\subsection{Fadings} |
| 378 |
|
| 379 |
For complicated graphics, uniform transparency settings are not always |
| 380 |
sufficient. Suppose, for instance, that while you paint a picture, you want the |
| 381 |
transparency to vary smoothly from completely opaque to completely transparent. |
| 382 |
This is a ``shading-like'' transparency. For such a form of transparency I will |
| 383 |
use the term \emph{fading} (as a noun). They are also known as \emph{soft |
| 384 |
masks}, \emph{opacity masks}, \emph{masks}, or \emph{soft clips}. |
| 385 |
|
| 386 |
|
| 387 |
\subsubsection{Creating Fadings} |
| 388 |
|
| 389 |
How do we specify a fading? This is a bit of an art since the underlying |
| 390 |
mechanism is quite powerful, but a bit difficult to use. |
| 391 |
|
| 392 |
Let us start with a bit of terminology. A \emph{fading} specifies for each |
| 393 |
point of an area the transparency of that point. This transparency can by any |
| 394 |
number between 0 and 1. A \emph{fading picture} is a normal graphic that, in a |
| 395 |
way to be described in a moment, determines the transparency of points inside |
| 396 |
the fading. Each fading has an underlying fading picture. |
| 397 |
|
| 398 |
The fading picture is a normal graphic drawn using any of the normal graphic |
| 399 |
drawing commands. A fading and its fading picture are related as follows: Given |
| 400 |
any point of the fading, the transparency of this point is determined by the |
| 401 |
luminosity of the fading picture at the same position. The luminosity of a |
| 402 |
point determines ``how bright'' the point is. The brighter the point in the |
| 403 |
fading picture, the more opaque is the point in the fading. In particular, a |
| 404 |
white point of the fading picture is completely opaque in the fading and a |
| 405 |
black point of the fading picture is completely transparent in the fading. (The |
| 406 |
background of the fading picture is always transparent in the fading as if the |
| 407 |
background were black.) |
| 408 |
|
| 409 |
It is rather counter-intuitive that a \emph{white} pixel of the fading picture |
| 410 |
will be \emph{opaque} in the fading and a \emph{black} pixel will be |
| 411 |
\emph{transparent}. For this reason, \tikzname\ defines a color called |
| 412 |
|transparent| that is the same as |black|. The nice thing about this definition |
| 413 |
is that the color |transparent!|\meta{percentage} in the fading picture yields |
| 414 |
a pixel that is \meta{percentage} percent transparent in the fading. |
| 415 |
|
| 416 |
Turning a fading picture into a normal picture is achieved using the following |
| 417 |
commands, which are \emph{only defined in the library}, namely the library |
| 418 |
|fadings|. So, to use them, you have to say |\usetikzlibrary{fadings}| first. |
| 419 |
|
| 420 |
\begin{environment}{{tikzfadingfrompicture}\oarg{options}} |
| 421 |
This command works like a |{tikzpicture}|, only the picture is not shown, |
| 422 |
but instead a fading is defined based on this picture. To set the name of |
| 423 |
the picture, use the |name| option (which is normally used to set the name |
| 424 |
of a node). |
| 425 |
% |
| 426 |
\begin{key}{/tikz/name=\marg{name}} |
| 427 |
Use this option with the |{tikzfadingfrompicture}| environment to set |
| 428 |
the name of the fading. You \emph{must} provide this option. |
| 429 |
\end{key} |
| 430 |
|
| 431 |
The following shading is 2cm by 2cm and gets more and more transparent from |
| 432 |
left to right, but is 50\% transparent for a large circle in the middle. |
| 433 |
% |
| 434 |
{\ifpgfmanualexternalize\tikzexternaldisable\fi |
| 435 |
\begin{codeexample}[preamble={\usetikzlibrary{fadings,patterns}}] |
| 436 |
\begin{tikzfadingfrompicture}[name=fade right with circle] |
| 437 |
\shade[left color=transparent!0, |
| 438 |
right color=transparent!100] (0,0) rectangle (2,2); |
| 439 |
\fill[transparent!50] (1,1) circle (0.7); |
| 440 |
\end{tikzfadingfrompicture} |
| 441 |
|
| 442 |
% Now we use the fading in another picture: |
| 443 |
\begin{tikzpicture} |
| 444 |
% Background |
| 445 |
\fill [black!20] (-1.2,-1.2) rectangle (1.2,1.2); |
| 446 |
\pattern [pattern=checkerboard,pattern color=black!30] |
| 447 |
(-1.2,-1.2) rectangle (1.2,1.2); |
| 448 |
|
| 449 |
\fill [path fading=fade right with circle,red] (-1,-1) rectangle (1,1); |
| 450 |
\end{tikzpicture} |
| 451 |
\end{codeexample} |
| 452 |
% |
| 453 |
In the next example we create a fading picture that contains some text. |
| 454 |
When the fading is used, we only see the shading ``through it''. |
| 455 |
% |
| 456 |
\begin{codeexample}[preamble={\usetikzlibrary{fadings,patterns}}] |
| 457 |
\begin{tikzfadingfrompicture}[name=tikz] |
| 458 |
\node [text=transparent!20, |
| 459 |
font=\fontencoding{T1}\fontfamily{ptm}\fontsize{45}{45}\bfseries] |
| 460 |
{Ti\emph{k}Z}; |
| 461 |
\end{tikzfadingfrompicture} |
| 462 |
|
| 463 |
% Now we use the fading in another picture: |
| 464 |
\begin{tikzpicture} |
| 465 |
\fill [black!20] (-2,-1) rectangle (2,1); |
| 466 |
\pattern [pattern=checkerboard,pattern color=black!30] |
| 467 |
(-2,-1) rectangle (2,1); |
| 468 |
|
| 469 |
\shade[path fading=tikz,fit fading=false, |
| 470 |
left color=blue,right color=black] |
| 471 |
(-2,-1) rectangle (2,1); |
| 472 |
\end{tikzpicture} |
| 473 |
\end{codeexample} |
| 474 |
}% |
| 475 |
|
| 476 |
The same effect can also be achieved using knockout groups, see |
| 477 |
Section~\ref{section-transparency-groups}. |
| 478 |
\end{environment} |
| 479 |
|
| 480 |
\begin{plainenvironment}{{tikzfadingfrompicture}\oarg{options}} |
| 481 |
The plain\TeX\ version of the environment. |
| 482 |
\end{plainenvironment} |
| 483 |
|
| 484 |
\begin{contextenvironment}{{tikzfadingfrompicture}\oarg{options}} |
| 485 |
The Con\TeX t version of the environment. |
| 486 |
\end{contextenvironment} |
| 487 |
|
| 488 |
\begin{command}{\tikzfading\oarg{options}} |
| 489 |
This command is used to define a fading similarly to the way a shading is |
| 490 |
defined. In the \meta{options} you should |
| 491 |
% |
| 492 |
\begin{enumerate} |
| 493 |
\item use the |name=|\meta{name} option to set a name for the fading, |
| 494 |
\item use the |shading| option to set the name of the shading that you |
| 495 |
wish to use, |
| 496 |
\item extra options for setting the colors of the shading (typically |
| 497 |
you will set them to the color |transparent!|\meta{percentage}). |
| 498 |
\end{enumerate} |
| 499 |
% |
| 500 |
Then, a new fading named \meta{name} will be created based on the shading. |
| 501 |
% |
| 502 |
\begin{codeexample}[preamble={\usetikzlibrary{fadings,patterns}}] |
| 503 |
\tikzfading[name=fade right, |
| 504 |
left color=transparent!0, |
| 505 |
right color=transparent!100] |
| 506 |
|
| 507 |
% Now we use the fading in another picture: |
| 508 |
\begin{tikzpicture} |
| 509 |
% Background |
| 510 |
\fill [black!20] (-1.2,-1.2) rectangle (1.2,1.2); |
| 511 |
\path [pattern=checkerboard,pattern color=black!30] |
| 512 |
(-1.2,-1.2) rectangle (1.2,1.2); |
| 513 |
|
| 514 |
\fill [red,path fading=fade right] (-1,-1) rectangle (1,1); |
| 515 |
\end{tikzpicture} |
| 516 |
\end{codeexample} |
| 517 |
|
| 518 |
\begin{codeexample}[preamble={\usetikzlibrary{fadings,patterns}}] |
| 519 |
\tikzfading[name=fade out, |
| 520 |
inner color=transparent!0, |
| 521 |
outer color=transparent!100] |
| 522 |
|
| 523 |
% Now we use the fading in another picture: |
| 524 |
\begin{tikzpicture} |
| 525 |
% Background |
| 526 |
\fill [black!20] (-1.2,-1.2) rectangle (1.2,1.2); |
| 527 |
\path [pattern=checkerboard,pattern color=black!30] |
| 528 |
(-1.2,-1.2) rectangle (1.2,1.2); |
| 529 |
|
| 530 |
\fill [blue,path fading=fade out] (-1,-1) rectangle (1,1); |
| 531 |
\end{tikzpicture} |
| 532 |
\end{codeexample} |
| 533 |
% |
| 534 |
\end{command} |
| 535 |
|
| 536 |
|
| 537 |
\subsubsection{Fading a Path} |
| 538 |
|
| 539 |
A fading specifies for each pixel of a certain area how transparent this pixel |
| 540 |
will be. The following options are used to install such a fading for the |
| 541 |
current scope or path. |
| 542 |
|
| 543 |
\pgfdeclarefading{fade down}{% |
| 544 |
\tikzset{top color=pgftransparent!0,bottom color=pgftransparent!100} |
| 545 |
\pgfuseshading{axis} |
| 546 |
} |
| 547 |
\pgfdeclarefading{fade inside}{% |
| 548 |
\tikzset{inner color=pgftransparent!90,outer color=pgftransparent!30} |
| 549 |
\pgfuseshading{radial} |
| 550 |
} |
| 551 |
|
| 552 |
\begin{key}{/tikz/path fading=\meta{name} (default \normalfont scope's setting)} |
| 553 |
This option tells \tikzname\ that the current path should be faded with the |
| 554 |
fading \meta{name}. If no \meta{name} is given, the \meta{name} set for the |
| 555 |
whole scope is used. Similarly to options like |draw| or |fill|, this |
| 556 |
option is reset for each path, so you have to add it to each path that |
| 557 |
should be faded. You can also specify |none| as \meta{name}, in which case |
| 558 |
fading for the path will be switched off in case it has been switched on by |
| 559 |
previous options or styles. |
| 560 |
% |
| 561 |
\begin{codeexample}[preamble={\usetikzlibrary{fadings,patterns}}] |
| 562 |
\begin{tikzpicture}[path fading=south] |
| 563 |
% Checker board |
| 564 |
\fill [black!20] (0,0) rectangle (4,3); |
| 565 |
\pattern [pattern=checkerboard,pattern color=black!30] |
| 566 |
(0,0) rectangle (4,3); |
| 567 |
|
| 568 |
\fill [color=blue] (0.5,1.5) rectangle +(1,1); |
| 569 |
\fill [color=blue,path fading=north] (2.5,1.5) rectangle +(1,1); |
| 570 |
|
| 571 |
\fill [color=red,path fading] (1,0.75) ellipse (.75 and .5); |
| 572 |
\fill [color=red] (3,0.75) ellipse (.75 and .5); |
| 573 |
\end{tikzpicture} |
| 574 |
\end{codeexample} |
| 575 |
|
| 576 |
\begin{key}{/tikz/fit fading=\meta{boolean} (default true, initially true)} |
| 577 |
When set to |true|, the fading is shifted and resized (in exactly the |
| 578 |
same way as a shading) so that it covers the current path. When set to |
| 579 |
|false|, the fading is only shifted so that it is centered on the |
| 580 |
path's center, but it is not resized. This can be useful for |
| 581 |
special-purpose fadings, for instance when you use a fading to ``punch |
| 582 |
out'' something. |
| 583 |
\end{key} |
| 584 |
|
| 585 |
\begin{key}{/tikz/fading transform=\meta{transformation options}} |
| 586 |
The \meta{transformation options} are applied to the fading before it |
| 587 |
is used. For instance, if \meta{transformation options} is set to |
| 588 |
|rotate=90|, the fading is rotated by 90 degrees. |
| 589 |
% |
| 590 |
\begin{codeexample}[ |
| 591 |
preamble={\usetikzlibrary{fadings,patterns}}, |
| 592 |
pre={\pgfdeclarefading{fade down}{% |
| 593 |
\tikzset{top color=pgftransparent!0,bottom color=pgftransparent!100} |
| 594 |
\pgfuseshading{axis} |
| 595 |
}}] |
| 596 |
\begin{tikzpicture}[path fading=fade down] |
| 597 |
% Checker board |
| 598 |
\fill [black!20] (0,0) rectangle (4,1.5); |
| 599 |
\path [pattern=checkerboard,pattern color=black!30] (0,0) rectangle (4,1.5); |
| 600 |
|
| 601 |
\fill [red,path fading,fading transform={rotate=90}] |
| 602 |
(1,0.75) ellipse (.75 and .5); |
| 603 |
\fill [red,path fading,fading transform={rotate=30}] |
| 604 |
(3,0.75) ellipse (.75 and .5); |
| 605 |
\end{tikzpicture} |
| 606 |
\end{codeexample} |
| 607 |
\end{key} |
| 608 |
|
| 609 |
\begin{key}{/tikz/fading angle=\meta{degree}} |
| 610 |
A shortcut for |fading transform={rotate=|\meta{degree}|}|. |
| 611 |
\end{key} |
| 612 |
|
| 613 |
Note that you can ``fade just about anything''. In particular, you can fade |
| 614 |
a shading. |
| 615 |
% |
| 616 |
\begin{codeexample}[preamble={\usetikzlibrary{fadings,patterns}}] |
| 617 |
\begin{tikzpicture} |
| 618 |
% Checker board |
| 619 |
\fill [black!20] (0,0) rectangle (4,4); |
| 620 |
\path [pattern=checkerboard,pattern color=black!30] (0,0) rectangle (4,4); |
| 621 |
|
| 622 |
\shade [ball color=blue,path fading=south] (2,2) circle (1.8); |
| 623 |
\end{tikzpicture} |
| 624 |
\end{codeexample} |
| 625 |
|
| 626 |
The |fade inside| of the following example is more transparent in the |
| 627 |
middle than on the outside. |
| 628 |
% |
| 629 |
\begin{codeexample}[preamble={\usetikzlibrary{fadings,patterns}}] |
| 630 |
\tikzfading[name=fade inside, |
| 631 |
inner color=transparent!80, |
| 632 |
outer color=transparent!30] |
| 633 |
\begin{tikzpicture} |
| 634 |
% Checker board |
| 635 |
\fill [black!20] (0,0) rectangle (4,4); |
| 636 |
\path [pattern=checkerboard,pattern color=black!30] (0,0) rectangle (4,4); |
| 637 |
|
| 638 |
\shade [ball color=red] (3,3) circle (0.8); |
| 639 |
\shade [ball color=white,path fading=fade inside] (2,2) circle (1.8); |
| 640 |
\end{tikzpicture} |
| 641 |
\end{codeexample} |
| 642 |
|
| 643 |
Note that adding the |path fading| option to a node fades the (background) |
| 644 |
path, not the text itself. To fade the text, you need to use a scope fading |
| 645 |
(see below). |
| 646 |
\end{key} |
| 647 |
|
| 648 |
Note that using fadings in conjunction with patterns can create visually rather |
| 649 |
pleasing effects: |
| 650 |
% |
| 651 |
\begin{codeexample}[preamble={\usetikzlibrary{fadings,patterns,shadows}}] |
| 652 |
\tikzfading[name=middle, |
| 653 |
top color=transparent!50, |
| 654 |
bottom color=transparent!50, |
| 655 |
middle color=transparent!20] |
| 656 |
\begin{tikzpicture} |
| 657 |
\node [circle,circular drop shadow, |
| 658 |
pattern=horizontal lines dark blue, |
| 659 |
path fading=south, |
| 660 |
minimum size=3.6cm] {}; |
| 661 |
\pattern [path fading=north, |
| 662 |
pattern=horizontal lines dark gray] |
| 663 |
(0,0) circle (1.8cm); |
| 664 |
\pattern [path fading=middle, |
| 665 |
pattern=crosshatch dots light steel blue] |
| 666 |
(0,0) circle (1.8cm); |
| 667 |
\end{tikzpicture} |
| 668 |
\end{codeexample} |
| 669 |
|
| 670 |
|
| 671 |
\subsubsection{Fading a Scope} |
| 672 |
|
| 673 |
In addition to fading individual paths, you may also wish to ``fade a scope'', |
| 674 |
that is, you may wish to install a fading that is used globally to specify the |
| 675 |
transparency for all objects drawn inside a scope. This effect can also be |
| 676 |
thought of as a ``soft clip'' and it works in a similar way: You add the |
| 677 |
|scope fading| option to a path in a scope -- typically the first one -- and |
| 678 |
then all subsequent drawings in the scope are faded. You will use a |
| 679 |
|transparency group| in conjunction, see the end of this section. |
| 680 |
|
| 681 |
\begin{key}{/tikz/scope fading=\meta{fading}} |
| 682 |
In principle, this key works in exactly the same way as the |path fading| |
| 683 |
key. The only difference is, that the effect of the fading will persist |
| 684 |
after the current path till the end of the scope. Thus, the \meta{fading} |
| 685 |
is applied to all subsequent drawings in the current scope, not just to the |
| 686 |
current path. In this regard, the option works very much like the |clip| |
| 687 |
option. (Note, however, that, unlike the |clip| option, fadings to not |
| 688 |
accumulate unless a transparency group is used.) |
| 689 |
|
| 690 |
The keys |fit fading| and |fading transform| have the same effect as for |
| 691 |
|path fading|. Also that, just as for |path fading|, providing the |
| 692 |
|scope fading| option with a |{scope}| only sets the name of the fading to |
| 693 |
be used. You have to explicitly provide the |scope fading| with a path to |
| 694 |
actually install a fading. |
| 695 |
% |
| 696 |
\begin{codeexample}[preamble={\usetikzlibrary{fadings,patterns}}] |
| 697 |
\begin{tikzpicture} |
| 698 |
\fill [black!20] (-2,-2) rectangle (2,2); |
| 699 |
\pattern [pattern=checkerboard,pattern color=black!30] |
| 700 |
(-2,-2) rectangle (2,2); |
| 701 |
|
| 702 |
% The bounding box of the shading: |
| 703 |
\draw [red] (-50bp,-50bp) rectangle (50bp,50bp); |
| 704 |
|
| 705 |
\path [scope fading=south,fit fading=false] (0,0); |
| 706 |
% fading is centered at its natural size |
| 707 |
|
| 708 |
\fill[red] ( 90:1) circle (1); |
| 709 |
\fill[green] (210:1) circle (1); |
| 710 |
\fill[blue] (330:1) circle (1); |
| 711 |
\end{tikzpicture} |
| 712 |
\end{codeexample} |
| 713 |
|
| 714 |
In the following example we resize the fading to the size of the whole |
| 715 |
picture: |
| 716 |
% |
| 717 |
\begin{codeexample}[preamble={\usetikzlibrary{fadings,patterns}}] |
| 718 |
\begin{tikzpicture} |
| 719 |
\fill [black!20] (-2,-2) rectangle (2,2); |
| 720 |
\pattern [pattern=checkerboard,pattern color=black!30] |
| 721 |
(-2,-2) rectangle (2,2); |
| 722 |
|
| 723 |
\path [scope fading=south] (-2,-2) rectangle (2,2); |
| 724 |
|
| 725 |
\fill[red] ( 90:1) circle (1); |
| 726 |
\fill[green] (210:1) circle (1); |
| 727 |
\fill[blue] (330:1) circle (1); |
| 728 |
\end{tikzpicture} |
| 729 |
\end{codeexample} |
| 730 |
|
| 731 |
Scope fadings are also needed if you wish to fade a node. |
| 732 |
% |
| 733 |
\begin{codeexample}[preamble={\usetikzlibrary{fadings}}] |
| 734 |
\tikz \node [scope fading=south,fading angle=45,text width=3.5cm] |
| 735 |
{ |
| 736 |
This is some text that will fade out as we go right |
| 737 |
and down. It is pretty hard to achieve this effect in |
| 738 |
other ways. |
| 739 |
}; |
| 740 |
\end{codeexample} |
| 741 |
% |
| 742 |
\end{key} |
| 743 |
|
| 744 |
|
| 745 |
\subsection{Transparency Groups} |
| 746 |
\label{section-transparency-groups} |
| 747 |
|
| 748 |
Consider the following cross and sign. They ``look wrong'' because we can see |
| 749 |
how they were constructed, while this is not really part of the desired effect. |
| 750 |
% |
| 751 |
\begin{codeexample}[] |
| 752 |
\begin{tikzpicture}[opacity=.5] |
| 753 |
\draw [line width=5mm] (0,0) -- (2,2); |
| 754 |
\draw [line width=5mm] (2,0) -- (0,2); |
| 755 |
\end{tikzpicture} |
| 756 |
\end{codeexample} |
| 757 |
|
| 758 |
\begin{codeexample}[preamble={\usetikzlibrary{shapes.symbols}}] |
| 759 |
\begin{tikzpicture} |
| 760 |
\node at (0,0) [forbidden sign,line width=2ex,draw=red,fill=white] {Smoking}; |
| 761 |
|
| 762 |
\node [opacity=.5] |
| 763 |
at (2,0) [forbidden sign,line width=2ex,draw=red,fill=white] {Smoking}; |
| 764 |
\end{tikzpicture} |
| 765 |
\end{codeexample} |
| 766 |
|
| 767 |
Transparency groups are used to render them correctly: |
| 768 |
% |
| 769 |
\begin{codeexample}[] |
| 770 |
\begin{tikzpicture}[opacity=.5] |
| 771 |
\begin{scope}[transparency group] |
| 772 |
\draw [line width=5mm] (0,0) -- (2,2); |
| 773 |
\draw [line width=5mm] (2,0) -- (0,2); |
| 774 |
\end{scope} |
| 775 |
\end{tikzpicture} |
| 776 |
\end{codeexample} |
| 777 |
|
| 778 |
\begin{codeexample}[preamble={\usetikzlibrary{shapes.symbols}}] |
| 779 |
\begin{tikzpicture} |
| 780 |
\node at (0,0) [forbidden sign,line width=2ex,draw=red,fill=white] {Smoking}; |
| 781 |
|
| 782 |
\begin{scope}[opacity=.5,transparency group] |
| 783 |
\node at (2,0) [forbidden sign,line width=2ex,draw=red,fill=white] |
| 784 |
{Smoking}; |
| 785 |
\end{scope} |
| 786 |
\end{tikzpicture} |
| 787 |
\end{codeexample} |
| 788 |
|
| 789 |
\begin{key}{/tikz/transparency group=\oarg{options}} |
| 790 |
This option can be given to a |scope|. It will have the following effect: |
| 791 |
The scope's contents is stroked\,/\penalty0\,filled ``ignoring any outside |
| 792 |
transparency''. This means, all previous transparency settings are ignored |
| 793 |
(you can still set transparency inside the group, but never mind). For |
| 794 |
instance, in the forbidden sign example, the whole sign is first painted |
| 795 |
(conceptually) like the image on the left hand side. Note that some pixels |
| 796 |
of the sign are painted multiple times (up to three times), but only the |
| 797 |
last color ``wins''. |
| 798 |
|
| 799 |
Then, when the scope is finished, it is painted as a whole. The \emph{fill} |
| 800 |
transparency settings are now applied to the resulting picture. For |
| 801 |
instance, the pixel that has been painted three times is just red at the |
| 802 |
end, so this red color will be blended with whatever is ``behind'' the |
| 803 |
group on the page. |
| 804 |
% |
| 805 |
\begin{codeexample}[preamble={\usetikzlibrary{patterns,shapes.symbols}}] |
| 806 |
\begin{tikzpicture} |
| 807 |
\pattern[pattern=checkerboard,pattern color=black!15](-1,-1) rectangle (3,1); |
| 808 |
\node at (0,0) [forbidden sign,line width=2ex,draw=red,fill=white] {Smoking}; |
| 809 |
|
| 810 |
\begin{scope}[transparency group,opacity=.5] |
| 811 |
\node at (2,0) [forbidden sign,line width=2ex,draw=red,fill=white] |
| 812 |
{Smoking}; |
| 813 |
\end{scope} |
| 814 |
\end{tikzpicture} |
| 815 |
\end{codeexample} |
| 816 |
|
| 817 |
Note that in the example, the |opacity=.5| is not active inside the |
| 818 |
transparency group: The group is only established at beginning of the scope |
| 819 |
and all options given to the |{scope}| environment are set before the group |
| 820 |
is established. To change the opacity \emph{inside} the group, you need to |
| 821 |
open another scope inside it or use the |opacity| key with a command inside |
| 822 |
the group: |
| 823 |
% |
| 824 |
\begin{codeexample}[preamble={\usetikzlibrary{patterns,shapes.symbols}}] |
| 825 |
\begin{tikzpicture} |
| 826 |
\pattern[pattern=checkerboard,pattern color=black!15](-1,-1) rectangle (3,1); |
| 827 |
\node at (0,0) [forbidden sign,line width=2ex,draw=red,fill=white] {Smoking}; |
| 828 |
|
| 829 |
\begin{scope}[transparency group,opacity=.5] |
| 830 |
\node (s) at (2,0) [forbidden sign,line width=2ex,draw=red,fill=white] |
| 831 |
{Smoking}; |
| 832 |
|
| 833 |
\draw [opacity=.5, line width=2ex, blue] (1.2,0) -- (2.8,0); |
| 834 |
\end{scope} |
| 835 |
\end{tikzpicture} |
| 836 |
\end{codeexample} |
| 837 |
|
| 838 |
The \meta{options} are a list of comma-separated options: |
| 839 |
% |
| 840 |
\begin{itemize} |
| 841 |
\item \declare{|knockout|} When this option is given inside the |
| 842 |
\meta{options}, the group becomes a so-called \emph{knockout} |
| 843 |
group. This means, essentially, that inside the group everything is |
| 844 |
painted as if the ``opacity'' of a line or area were just another |
| 845 |
color channel. In particular, if you paint a pixel with opacity $0$ |
| 846 |
inside a knockout group, this pixel becomes perfectly transparent |
| 847 |
immediately. In contrast, painting a pixel with something of |
| 848 |
opacity $0$ normally has no effect. |
| 849 |
|
| 850 |
Not all renderers, let alone printers, will support this. At the |
| 851 |
time of writing, Apple's Preview will not show the following |
| 852 |
correctly (you should see the text \tikzname\ in the middle): |
| 853 |
% |
| 854 |
\begin{codeexample}[] |
| 855 |
\begin{tikzpicture} |
| 856 |
\shade [left color=red,right color=blue] (-2,-1) rectangle (2,1); |
| 857 |
\begin{scope}[transparency group=knockout] |
| 858 |
\fill [white] (-1.9,-.9) rectangle (1.9,.9); |
| 859 |
\node [opacity=0, |
| 860 |
font=\fontencoding{T1}\fontfamily{ptm}\fontsize{45}{45}\bfseries] |
| 861 |
{Ti\emph{k}Z}; |
| 862 |
\end{scope} |
| 863 |
\end{tikzpicture} |
| 864 |
\end{codeexample} |
| 865 |
% |
| 866 |
In the example, we first draw a large shading and then, inside the |
| 867 |
transparency group ``overwrite'' most of this shading by a big |
| 868 |
white rectangle. The interesting part is the text of the node, |
| 869 |
which has opacity |0|. Normally, this would mean that nothing is |
| 870 |
shown. However, in a knockout group, we ``paint'' the text with an |
| 871 |
``opacity zero'' color. The effect is that part of the totally |
| 872 |
opaque white rectangle gets overwritten by a perfectly transparent |
| 873 |
area (namely exactly the area taken up by the pixels of the text). |
| 874 |
When this whole knockout group is then placed on top of the |
| 875 |
shading, the shading will ``shine through'' at the knocked-out |
| 876 |
pixels. |
| 877 |
|
| 878 |
\item \declare{|isolated|}|=false| A group can be isolated or not. By |
| 879 |
default, they are isolated, since this is typically what you want. |
| 880 |
For details on what isolated groups are, exactly, see Section~7.3.4 |
| 881 |
of the \textsc{pdf} Specification, version~1.7. |
| 882 |
\end{itemize} |
| 883 |
|
| 884 |
Note that when a transparency group is created, \tikzname\ must correctly |
| 885 |
determine the size of the material inside the group. Usually, this is no |
| 886 |
problem, but when you use things like |overlay| or |transform canvas|, |
| 887 |
trouble may result. In this case, please consult |
| 888 |
Section~\ref{section-transparency} on how to sidestep this problem in such |
| 889 |
cases. |
| 890 |
\end{key} |
| 891 |
|
| 892 |
|
| 893 |
%%% Local Variables: |
| 894 |
%%% mode: latex |
| 895 |
%%% TeX-master: "pgfmanual" |
| 896 |
%%% End: |