| 1 |
/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ |
| 2 |
#ifndef _LINUX_FS_H |
| 3 |
#define _LINUX_FS_H |
| 4 |
|
| 5 |
/* |
| 6 |
* This file has definitions for some important file table structures |
| 7 |
* and constants and structures used by various generic file system |
| 8 |
* ioctl's. Please do not make any changes in this file before |
| 9 |
* sending patches for review to [email protected] and |
| 10 |
* [email protected]. |
| 11 |
*/ |
| 12 |
|
| 13 |
#include <linux/limits.h> |
| 14 |
#include <linux/ioctl.h> |
| 15 |
#include <linux/types.h> |
| 16 |
#include <linux/fscrypt.h> |
| 17 |
|
| 18 |
/* Use of MS_* flags within the kernel is restricted to core mount(2) code. */ |
| 19 |
#include <linux/mount.h> |
| 20 |
|
| 21 |
/* |
| 22 |
* It's silly to have NR_OPEN bigger than NR_FILE, but you can change |
| 23 |
* the file limit at runtime and only root can increase the per-process |
| 24 |
* nr_file rlimit, so it's safe to set up a ridiculously high absolute |
| 25 |
* upper limit on files-per-process. |
| 26 |
* |
| 27 |
* Some programs (notably those using select()) may have to be |
| 28 |
* recompiled to take full advantage of the new limits.. |
| 29 |
*/ |
| 30 |
|
| 31 |
/* Fixed constants first: */ |
| 32 |
#undef NR_OPEN |
| 33 |
#define INR_OPEN_CUR 1024 /* Initial setting for nfile rlimits */ |
| 34 |
#define INR_OPEN_MAX 4096 /* Hard limit for nfile rlimits */ |
| 35 |
|
| 36 |
#define BLOCK_SIZE_BITS 10 |
| 37 |
#define BLOCK_SIZE (1<<BLOCK_SIZE_BITS) |
| 38 |
|
| 39 |
/* flags for integrity meta */ |
| 40 |
#define IO_INTEGRITY_CHK_GUARD (1U << 0) /* enforce guard check */ |
| 41 |
#define IO_INTEGRITY_CHK_REFTAG (1U << 1) /* enforce ref check */ |
| 42 |
#define IO_INTEGRITY_CHK_APPTAG (1U << 2) /* enforce app check */ |
| 43 |
|
| 44 |
#define IO_INTEGRITY_VALID_FLAGS (IO_INTEGRITY_CHK_GUARD | \ |
| 45 |
IO_INTEGRITY_CHK_REFTAG | \ |
| 46 |
IO_INTEGRITY_CHK_APPTAG) |
| 47 |
|
| 48 |
#define SEEK_SET 0 /* seek relative to beginning of file */ |
| 49 |
#define SEEK_CUR 1 /* seek relative to current file position */ |
| 50 |
#define SEEK_END 2 /* seek relative to end of file */ |
| 51 |
#define SEEK_DATA 3 /* seek to the next data */ |
| 52 |
#define SEEK_HOLE 4 /* seek to the next hole */ |
| 53 |
#define SEEK_MAX SEEK_HOLE |
| 54 |
|
| 55 |
#define RENAME_NOREPLACE (1 << 0) /* Don't overwrite target */ |
| 56 |
#define RENAME_EXCHANGE (1 << 1) /* Exchange source and dest */ |
| 57 |
#define RENAME_WHITEOUT (1 << 2) /* Whiteout source */ |
| 58 |
|
| 59 |
/* |
| 60 |
* The root inode of procfs is guaranteed to always have the same inode number. |
| 61 |
* For programs that make heavy use of procfs, verifying that the root is a |
| 62 |
* real procfs root and using openat2(RESOLVE_{NO_{XDEV,MAGICLINKS},BENEATH}) |
| 63 |
* will allow you to make sure you are never tricked into operating on the |
| 64 |
* wrong procfs file. |
| 65 |
*/ |
| 66 |
enum procfs_ino { |
| 67 |
PROCFS_ROOT_INO = 1, |
| 68 |
}; |
| 69 |
|
| 70 |
struct file_clone_range { |
| 71 |
__s64 src_fd; |
| 72 |
__u64 src_offset; |
| 73 |
__u64 src_length; |
| 74 |
__u64 dest_offset; |
| 75 |
}; |
| 76 |
|
| 77 |
struct fstrim_range { |
| 78 |
__u64 start; |
| 79 |
__u64 len; |
| 80 |
__u64 minlen; |
| 81 |
}; |
| 82 |
|
| 83 |
/* |
| 84 |
* We include a length field because some filesystems (vfat) have an identifier |
| 85 |
* that we do want to expose as a UUID, but doesn't have the standard length. |
| 86 |
* |
| 87 |
* We use a fixed size buffer beacuse this interface will, by fiat, never |
| 88 |
* support "UUIDs" longer than 16 bytes; we don't want to force all downstream |
| 89 |
* users to have to deal with that. |
| 90 |
*/ |
| 91 |
struct fsuuid2 { |
| 92 |
__u8 len; |
| 93 |
__u8 uuid[16]; |
| 94 |
}; |
| 95 |
|
| 96 |
struct fs_sysfs_path { |
| 97 |
__u8 len; |
| 98 |
__u8 name[128]; |
| 99 |
}; |
| 100 |
|
| 101 |
/* Protection info capability flags */ |
| 102 |
#define LBMD_PI_CAP_INTEGRITY (1 << 0) |
| 103 |
#define LBMD_PI_CAP_REFTAG (1 << 1) |
| 104 |
|
| 105 |
/* Checksum types for Protection Information */ |
| 106 |
#define LBMD_PI_CSUM_NONE 0 |
| 107 |
#define LBMD_PI_CSUM_IP 1 |
| 108 |
#define LBMD_PI_CSUM_CRC16_T10DIF 2 |
| 109 |
#define LBMD_PI_CSUM_CRC64_NVME 4 |
| 110 |
|
| 111 |
/* sizeof first published struct */ |
| 112 |
#define LBMD_SIZE_VER0 16 |
| 113 |
|
| 114 |
/* |
| 115 |
* Logical block metadata capability descriptor |
| 116 |
* If the device does not support metadata, all the fields will be zero. |
| 117 |
* Applications must check lbmd_flags to determine whether metadata is |
| 118 |
* supported or not. |
| 119 |
*/ |
| 120 |
struct logical_block_metadata_cap { |
| 121 |
/* Bitmask of logical block metadata capability flags */ |
| 122 |
__u32 lbmd_flags; |
| 123 |
/* |
| 124 |
* The amount of data described by each unit of logical block |
| 125 |
* metadata |
| 126 |
*/ |
| 127 |
__u16 lbmd_interval; |
| 128 |
/* |
| 129 |
* Size in bytes of the logical block metadata associated with each |
| 130 |
* interval |
| 131 |
*/ |
| 132 |
__u8 lbmd_size; |
| 133 |
/* |
| 134 |
* Size in bytes of the opaque block tag associated with each |
| 135 |
* interval |
| 136 |
*/ |
| 137 |
__u8 lbmd_opaque_size; |
| 138 |
/* |
| 139 |
* Offset in bytes of the opaque block tag within the logical block |
| 140 |
* metadata |
| 141 |
*/ |
| 142 |
__u8 lbmd_opaque_offset; |
| 143 |
/* Size in bytes of the T10 PI tuple associated with each interval */ |
| 144 |
__u8 lbmd_pi_size; |
| 145 |
/* Offset in bytes of T10 PI tuple within the logical block metadata */ |
| 146 |
__u8 lbmd_pi_offset; |
| 147 |
/* T10 PI guard tag type */ |
| 148 |
__u8 lbmd_guard_tag_type; |
| 149 |
/* Size in bytes of the T10 PI application tag */ |
| 150 |
__u8 lbmd_app_tag_size; |
| 151 |
/* Size in bytes of the T10 PI reference tag */ |
| 152 |
__u8 lbmd_ref_tag_size; |
| 153 |
/* Size in bytes of the T10 PI storage tag */ |
| 154 |
__u8 lbmd_storage_tag_size; |
| 155 |
__u8 pad; |
| 156 |
}; |
| 157 |
|
| 158 |
/* extent-same (dedupe) ioctls; these MUST match the btrfs ioctl definitions */ |
| 159 |
#define FILE_DEDUPE_RANGE_SAME 0 |
| 160 |
#define FILE_DEDUPE_RANGE_DIFFERS 1 |
| 161 |
|
| 162 |
/* from struct btrfs_ioctl_file_extent_same_info */ |
| 163 |
struct file_dedupe_range_info { |
| 164 |
__s64 dest_fd; /* in - destination file */ |
| 165 |
__u64 dest_offset; /* in - start of extent in destination */ |
| 166 |
__u64 bytes_deduped; /* out - total # of bytes we were able |
| 167 |
* to dedupe from this file. */ |
| 168 |
/* status of this dedupe operation: |
| 169 |
* < 0 for error |
| 170 |
* == FILE_DEDUPE_RANGE_SAME if dedupe succeeds |
| 171 |
* == FILE_DEDUPE_RANGE_DIFFERS if data differs |
| 172 |
*/ |
| 173 |
__s32 status; /* out - see above description */ |
| 174 |
__u32 reserved; /* must be zero */ |
| 175 |
}; |
| 176 |
|
| 177 |
/* from struct btrfs_ioctl_file_extent_same_args */ |
| 178 |
struct file_dedupe_range { |
| 179 |
__u64 src_offset; /* in - start of extent in source */ |
| 180 |
__u64 src_length; /* in - length of extent */ |
| 181 |
__u16 dest_count; /* in - total elements in info array */ |
| 182 |
__u16 reserved1; /* must be zero */ |
| 183 |
__u32 reserved2; /* must be zero */ |
| 184 |
struct file_dedupe_range_info info[]; |
| 185 |
}; |
| 186 |
|
| 187 |
/* And dynamically-tunable limits and defaults: */ |
| 188 |
struct files_stat_struct { |
| 189 |
unsigned long nr_files; /* read only */ |
| 190 |
unsigned long nr_free_files; /* read only */ |
| 191 |
unsigned long max_files; /* tunable */ |
| 192 |
}; |
| 193 |
|
| 194 |
struct inodes_stat_t { |
| 195 |
long nr_inodes; |
| 196 |
long nr_unused; |
| 197 |
long dummy[5]; /* padding for sysctl ABI compatibility */ |
| 198 |
}; |
| 199 |
|
| 200 |
|
| 201 |
#define NR_FILE 8192 /* this can well be larger on a larger system */ |
| 202 |
|
| 203 |
/* |
| 204 |
* Structure for FS_IOC_FSGETXATTR[A] and FS_IOC_FSSETXATTR. |
| 205 |
*/ |
| 206 |
struct fsxattr { |
| 207 |
__u32 fsx_xflags; /* xflags field value (get/set) */ |
| 208 |
__u32 fsx_extsize; /* extsize field value (get/set)*/ |
| 209 |
__u32 fsx_nextents; /* nextents field value (get) */ |
| 210 |
__u32 fsx_projid; /* project identifier (get/set) */ |
| 211 |
__u32 fsx_cowextsize; /* CoW extsize field value (get/set)*/ |
| 212 |
unsigned char fsx_pad[8]; |
| 213 |
}; |
| 214 |
|
| 215 |
/* |
| 216 |
* Variable size structure for file_[sg]et_attr(). |
| 217 |
* |
| 218 |
* Note. This is alternative to the structure 'struct file_kattr'/'struct fsxattr'. |
| 219 |
* As this structure is passed to/from userspace with its size, this can |
| 220 |
* be versioned based on the size. |
| 221 |
*/ |
| 222 |
struct file_attr { |
| 223 |
__u64 fa_xflags; /* xflags field value (get/set) */ |
| 224 |
__u32 fa_extsize; /* extsize field value (get/set)*/ |
| 225 |
__u32 fa_nextents; /* nextents field value (get) */ |
| 226 |
__u32 fa_projid; /* project identifier (get/set) */ |
| 227 |
__u32 fa_cowextsize; /* CoW extsize field value (get/set) */ |
| 228 |
}; |
| 229 |
|
| 230 |
#define FILE_ATTR_SIZE_VER0 24 |
| 231 |
#define FILE_ATTR_SIZE_LATEST FILE_ATTR_SIZE_VER0 |
| 232 |
|
| 233 |
/* |
| 234 |
* Flags for the fsx_xflags field |
| 235 |
*/ |
| 236 |
#define FS_XFLAG_REALTIME 0x00000001 /* data in realtime volume */ |
| 237 |
#define FS_XFLAG_PREALLOC 0x00000002 /* preallocated file extents */ |
| 238 |
#define FS_XFLAG_IMMUTABLE 0x00000008 /* file cannot be modified */ |
| 239 |
#define FS_XFLAG_APPEND 0x00000010 /* all writes append */ |
| 240 |
#define FS_XFLAG_SYNC 0x00000020 /* all writes synchronous */ |
| 241 |
#define FS_XFLAG_NOATIME 0x00000040 /* do not update access time */ |
| 242 |
#define FS_XFLAG_NODUMP 0x00000080 /* do not include in backups */ |
| 243 |
#define FS_XFLAG_RTINHERIT 0x00000100 /* create with rt bit set */ |
| 244 |
#define FS_XFLAG_PROJINHERIT 0x00000200 /* create with parents projid */ |
| 245 |
#define FS_XFLAG_NOSYMLINKS 0x00000400 /* disallow symlink creation */ |
| 246 |
#define FS_XFLAG_EXTSIZE 0x00000800 /* extent size allocator hint */ |
| 247 |
#define FS_XFLAG_EXTSZINHERIT 0x00001000 /* inherit inode extent size */ |
| 248 |
#define FS_XFLAG_NODEFRAG 0x00002000 /* do not defragment */ |
| 249 |
#define FS_XFLAG_FILESTREAM 0x00004000 /* use filestream allocator */ |
| 250 |
#define FS_XFLAG_DAX 0x00008000 /* use DAX for IO */ |
| 251 |
#define FS_XFLAG_COWEXTSIZE 0x00010000 /* CoW extent size allocator hint */ |
| 252 |
#define FS_XFLAG_VERITY 0x00020000 /* fs-verity enabled */ |
| 253 |
#define FS_XFLAG_HASATTR 0x80000000 /* no DIFLAG for this */ |
| 254 |
|
| 255 |
/* the read-only stuff doesn't really belong here, but any other place is |
| 256 |
probably as bad and I don't want to create yet another include file. */ |
| 257 |
|
| 258 |
#define BLKROSET _IO(0x12,93) /* set device read-only (0 = read-write) */ |
| 259 |
#define BLKROGET _IO(0x12,94) /* get read-only status (0 = read_write) */ |
| 260 |
#define BLKRRPART _IO(0x12,95) /* re-read partition table */ |
| 261 |
#define BLKGETSIZE _IO(0x12,96) /* return device size /512 (long *arg) */ |
| 262 |
#define BLKFLSBUF _IO(0x12,97) /* flush buffer cache */ |
| 263 |
#define BLKRASET _IO(0x12,98) /* set read ahead for block device */ |
| 264 |
#define BLKRAGET _IO(0x12,99) /* get current read ahead setting */ |
| 265 |
#define BLKFRASET _IO(0x12,100)/* set filesystem (mm/filemap.c) read-ahead */ |
| 266 |
#define BLKFRAGET _IO(0x12,101)/* get filesystem (mm/filemap.c) read-ahead */ |
| 267 |
#define BLKSECTSET _IO(0x12,102)/* set max sectors per request (ll_rw_blk.c) */ |
| 268 |
#define BLKSECTGET _IO(0x12,103)/* get max sectors per request (ll_rw_blk.c) */ |
| 269 |
#define BLKSSZGET _IO(0x12,104)/* get block device sector size */ |
| 270 |
#if 0 |
| 271 |
#define BLKPG _IO(0x12,105)/* See blkpg.h */ |
| 272 |
|
| 273 |
/* Some people are morons. Do not use sizeof! */ |
| 274 |
|
| 275 |
#define BLKELVGET _IOR(0x12,106,size_t)/* elevator get */ |
| 276 |
#define BLKELVSET _IOW(0x12,107,size_t)/* elevator set */ |
| 277 |
/* This was here just to show that the number is taken - |
| 278 |
probably all these _IO(0x12,*) ioctls should be moved to blkpg.h. */ |
| 279 |
#endif |
| 280 |
/* A jump here: 108-111 have been used for various private purposes. */ |
| 281 |
#define BLKBSZGET _IOR(0x12,112,size_t) |
| 282 |
#define BLKBSZSET _IOW(0x12,113,size_t) |
| 283 |
#define BLKGETSIZE64 _IOR(0x12,114,size_t) /* return device size in bytes (u64 *arg) */ |
| 284 |
#define BLKTRACESETUP _IOWR(0x12,115,struct blk_user_trace_setup) |
| 285 |
#define BLKTRACESTART _IO(0x12,116) |
| 286 |
#define BLKTRACESTOP _IO(0x12,117) |
| 287 |
#define BLKTRACETEARDOWN _IO(0x12,118) |
| 288 |
#define BLKDISCARD _IO(0x12,119) |
| 289 |
#define BLKIOMIN _IO(0x12,120) |
| 290 |
#define BLKIOOPT _IO(0x12,121) |
| 291 |
#define BLKALIGNOFF _IO(0x12,122) |
| 292 |
#define BLKPBSZGET _IO(0x12,123) |
| 293 |
#define BLKDISCARDZEROES _IO(0x12,124) |
| 294 |
#define BLKSECDISCARD _IO(0x12,125) |
| 295 |
#define BLKROTATIONAL _IO(0x12,126) |
| 296 |
#define BLKZEROOUT _IO(0x12,127) |
| 297 |
#define BLKGETDISKSEQ _IOR(0x12,128,__u64) |
| 298 |
/* 130-136 and 142 are used by zoned block device ioctls (uapi/linux/blkzoned.h) */ |
| 299 |
/* 137-141 are used by blk-crypto ioctls (uapi/linux/blk-crypto.h) */ |
| 300 |
#define BLKTRACESETUP2 _IOWR(0x12, 142, struct blk_user_trace_setup2) |
| 301 |
|
| 302 |
#define BMAP_IOCTL 1 /* obsolete - kept for compatibility */ |
| 303 |
#define FIBMAP _IO(0x00,1) /* bmap access */ |
| 304 |
#define FIGETBSZ _IO(0x00,2) /* get the block size used for bmap */ |
| 305 |
#define FIFREEZE _IOWR('X', 119, int) /* Freeze */ |
| 306 |
#define FITHAW _IOWR('X', 120, int) /* Thaw */ |
| 307 |
#define FITRIM _IOWR('X', 121, struct fstrim_range) /* Trim */ |
| 308 |
#define FICLONE _IOW(0x94, 9, int) |
| 309 |
#define FICLONERANGE _IOW(0x94, 13, struct file_clone_range) |
| 310 |
#define FIDEDUPERANGE _IOWR(0x94, 54, struct file_dedupe_range) |
| 311 |
|
| 312 |
#define FSLABEL_MAX 256 /* Max chars for the interface; each fs may differ */ |
| 313 |
|
| 314 |
#define FS_IOC_GETFLAGS _IOR('f', 1, long) |
| 315 |
#define FS_IOC_SETFLAGS _IOW('f', 2, long) |
| 316 |
#define FS_IOC_GETVERSION _IOR('v', 1, long) |
| 317 |
#define FS_IOC_SETVERSION _IOW('v', 2, long) |
| 318 |
#define FS_IOC_FIEMAP _IOWR('f', 11, struct fiemap) |
| 319 |
#define FS_IOC32_GETFLAGS _IOR('f', 1, int) |
| 320 |
#define FS_IOC32_SETFLAGS _IOW('f', 2, int) |
| 321 |
#define FS_IOC32_GETVERSION _IOR('v', 1, int) |
| 322 |
#define FS_IOC32_SETVERSION _IOW('v', 2, int) |
| 323 |
#define FS_IOC_FSGETXATTR _IOR('X', 31, struct fsxattr) |
| 324 |
#define FS_IOC_FSSETXATTR _IOW('X', 32, struct fsxattr) |
| 325 |
#define FS_IOC_GETFSLABEL _IOR(0x94, 49, char[FSLABEL_MAX]) |
| 326 |
#define FS_IOC_SETFSLABEL _IOW(0x94, 50, char[FSLABEL_MAX]) |
| 327 |
/* Returns the external filesystem UUID, the same one blkid returns */ |
| 328 |
#define FS_IOC_GETFSUUID _IOR(0x15, 0, struct fsuuid2) |
| 329 |
/* |
| 330 |
* Returns the path component under /sys/fs/ that refers to this filesystem; |
| 331 |
* also /sys/kernel/debug/ for filesystems with debugfs exports |
| 332 |
*/ |
| 333 |
#define FS_IOC_GETFSSYSFSPATH _IOR(0x15, 1, struct fs_sysfs_path) |
| 334 |
/* Get logical block metadata capability details */ |
| 335 |
#define FS_IOC_GETLBMD_CAP _IOWR(0x15, 2, struct logical_block_metadata_cap) |
| 336 |
|
| 337 |
/* |
| 338 |
* Inode flags (FS_IOC_GETFLAGS / FS_IOC_SETFLAGS) |
| 339 |
* |
| 340 |
* Note: for historical reasons, these flags were originally used and |
| 341 |
* defined for use by ext2/ext3, and then other file systems started |
| 342 |
* using these flags so they wouldn't need to write their own version |
| 343 |
* of chattr/lsattr (which was shipped as part of e2fsprogs). You |
| 344 |
* should think twice before trying to use these flags in new |
| 345 |
* contexts, or trying to assign these flags, since they are used both |
| 346 |
* as the UAPI and the on-disk encoding for ext2/3/4. Also, we are |
| 347 |
* almost out of 32-bit flags. :-) |
| 348 |
* |
| 349 |
* We have recently hoisted FS_IOC_FSGETXATTR / FS_IOC_FSSETXATTR from |
| 350 |
* XFS to the generic FS level interface. This uses a structure that |
| 351 |
* has padding and hence has more room to grow, so it may be more |
| 352 |
* appropriate for many new use cases. |
| 353 |
* |
| 354 |
* Please do not change these flags or interfaces before checking with |
| 355 |
* [email protected] and [email protected]. |
| 356 |
*/ |
| 357 |
#define FS_SECRM_FL 0x00000001 /* Secure deletion */ |
| 358 |
#define FS_UNRM_FL 0x00000002 /* Undelete */ |
| 359 |
#define FS_COMPR_FL 0x00000004 /* Compress file */ |
| 360 |
#define FS_SYNC_FL 0x00000008 /* Synchronous updates */ |
| 361 |
#define FS_IMMUTABLE_FL 0x00000010 /* Immutable file */ |
| 362 |
#define FS_APPEND_FL 0x00000020 /* writes to file may only append */ |
| 363 |
#define FS_NODUMP_FL 0x00000040 /* do not dump file */ |
| 364 |
#define FS_NOATIME_FL 0x00000080 /* do not update atime */ |
| 365 |
/* Reserved for compression usage... */ |
| 366 |
#define FS_DIRTY_FL 0x00000100 |
| 367 |
#define FS_COMPRBLK_FL 0x00000200 /* One or more compressed clusters */ |
| 368 |
#define FS_NOCOMP_FL 0x00000400 /* Don't compress */ |
| 369 |
/* End compression flags --- maybe not all used */ |
| 370 |
#define FS_ENCRYPT_FL 0x00000800 /* Encrypted file */ |
| 371 |
#define FS_BTREE_FL 0x00001000 /* btree format dir */ |
| 372 |
#define FS_INDEX_FL 0x00001000 /* hash-indexed directory */ |
| 373 |
#define FS_IMAGIC_FL 0x00002000 /* AFS directory */ |
| 374 |
#define FS_JOURNAL_DATA_FL 0x00004000 /* Reserved for ext3 */ |
| 375 |
#define FS_NOTAIL_FL 0x00008000 /* file tail should not be merged */ |
| 376 |
#define FS_DIRSYNC_FL 0x00010000 /* dirsync behaviour (directories only) */ |
| 377 |
#define FS_TOPDIR_FL 0x00020000 /* Top of directory hierarchies*/ |
| 378 |
#define FS_HUGE_FILE_FL 0x00040000 /* Reserved for ext4 */ |
| 379 |
#define FS_EXTENT_FL 0x00080000 /* Extents */ |
| 380 |
#define FS_VERITY_FL 0x00100000 /* Verity protected inode */ |
| 381 |
#define FS_EA_INODE_FL 0x00200000 /* Inode used for large EA */ |
| 382 |
#define FS_EOFBLOCKS_FL 0x00400000 /* Reserved for ext4 */ |
| 383 |
#define FS_NOCOW_FL 0x00800000 /* Do not cow file */ |
| 384 |
#define FS_DAX_FL 0x02000000 /* Inode is DAX */ |
| 385 |
#define FS_INLINE_DATA_FL 0x10000000 /* Reserved for ext4 */ |
| 386 |
#define FS_PROJINHERIT_FL 0x20000000 /* Create with parents projid */ |
| 387 |
#define FS_CASEFOLD_FL 0x40000000 /* Folder is case insensitive */ |
| 388 |
#define FS_RESERVED_FL 0x80000000 /* reserved for ext2 lib */ |
| 389 |
|
| 390 |
#define FS_FL_USER_VISIBLE 0x0003DFFF /* User visible flags */ |
| 391 |
#define FS_FL_USER_MODIFIABLE 0x000380FF /* User modifiable flags */ |
| 392 |
|
| 393 |
|
| 394 |
#define SYNC_FILE_RANGE_WAIT_BEFORE 1 |
| 395 |
#define SYNC_FILE_RANGE_WRITE 2 |
| 396 |
#define SYNC_FILE_RANGE_WAIT_AFTER 4 |
| 397 |
#define SYNC_FILE_RANGE_WRITE_AND_WAIT (SYNC_FILE_RANGE_WRITE | \ |
| 398 |
SYNC_FILE_RANGE_WAIT_BEFORE | \ |
| 399 |
SYNC_FILE_RANGE_WAIT_AFTER) |
| 400 |
|
| 401 |
/* |
| 402 |
* Flags for preadv2/pwritev2: |
| 403 |
*/ |
| 404 |
|
| 405 |
typedef int __bitwise __kernel_rwf_t; |
| 406 |
|
| 407 |
/* high priority request, poll if possible */ |
| 408 |
#define RWF_HIPRI ((__kernel_rwf_t)0x00000001) |
| 409 |
|
| 410 |
/* per-IO O_DSYNC */ |
| 411 |
#define RWF_DSYNC ((__kernel_rwf_t)0x00000002) |
| 412 |
|
| 413 |
/* per-IO O_SYNC */ |
| 414 |
#define RWF_SYNC ((__kernel_rwf_t)0x00000004) |
| 415 |
|
| 416 |
/* per-IO, return -EAGAIN if operation would block */ |
| 417 |
#define RWF_NOWAIT ((__kernel_rwf_t)0x00000008) |
| 418 |
|
| 419 |
/* per-IO O_APPEND */ |
| 420 |
#define RWF_APPEND ((__kernel_rwf_t)0x00000010) |
| 421 |
|
| 422 |
/* per-IO negation of O_APPEND */ |
| 423 |
#define RWF_NOAPPEND ((__kernel_rwf_t)0x00000020) |
| 424 |
|
| 425 |
/* Atomic Write */ |
| 426 |
#define RWF_ATOMIC ((__kernel_rwf_t)0x00000040) |
| 427 |
|
| 428 |
/* buffered IO that drops the cache after reading or writing data */ |
| 429 |
#define RWF_DONTCACHE ((__kernel_rwf_t)0x00000080) |
| 430 |
|
| 431 |
/* prevent pipe and socket writes from raising SIGPIPE */ |
| 432 |
#define RWF_NOSIGNAL ((__kernel_rwf_t)0x00000100) |
| 433 |
|
| 434 |
/* mask of flags supported by the kernel */ |
| 435 |
#define RWF_SUPPORTED (RWF_HIPRI | RWF_DSYNC | RWF_SYNC | RWF_NOWAIT |\ |
| 436 |
RWF_APPEND | RWF_NOAPPEND | RWF_ATOMIC |\ |
| 437 |
RWF_DONTCACHE | RWF_NOSIGNAL) |
| 438 |
|
| 439 |
#define PROCFS_IOCTL_MAGIC 'f' |
| 440 |
|
| 441 |
/* Pagemap ioctl */ |
| 442 |
#define PAGEMAP_SCAN _IOWR(PROCFS_IOCTL_MAGIC, 16, struct pm_scan_arg) |
| 443 |
|
| 444 |
/* Bitmasks provided in pm_scan_args masks and reported in page_region.categories. */ |
| 445 |
#define PAGE_IS_WPALLOWED (1 << 0) |
| 446 |
#define PAGE_IS_WRITTEN (1 << 1) |
| 447 |
#define PAGE_IS_FILE (1 << 2) |
| 448 |
#define PAGE_IS_PRESENT (1 << 3) |
| 449 |
#define PAGE_IS_SWAPPED (1 << 4) |
| 450 |
#define PAGE_IS_PFNZERO (1 << 5) |
| 451 |
#define PAGE_IS_HUGE (1 << 6) |
| 452 |
#define PAGE_IS_SOFT_DIRTY (1 << 7) |
| 453 |
#define PAGE_IS_GUARD (1 << 8) |
| 454 |
|
| 455 |
/* |
| 456 |
* struct page_region - Page region with flags |
| 457 |
* @start: Start of the region |
| 458 |
* @end: End of the region (exclusive) |
| 459 |
* @categories: PAGE_IS_* category bitmask for the region |
| 460 |
*/ |
| 461 |
struct page_region { |
| 462 |
__u64 start; |
| 463 |
__u64 end; |
| 464 |
__u64 categories; |
| 465 |
}; |
| 466 |
|
| 467 |
/* Flags for PAGEMAP_SCAN ioctl */ |
| 468 |
#define PM_SCAN_WP_MATCHING (1 << 0) /* Write protect the pages matched. */ |
| 469 |
#define PM_SCAN_CHECK_WPASYNC (1 << 1) /* Abort the scan when a non-WP-enabled page is found. */ |
| 470 |
|
| 471 |
/* |
| 472 |
* struct pm_scan_arg - Pagemap ioctl argument |
| 473 |
* @size: Size of the structure |
| 474 |
* @flags: Flags for the IOCTL |
| 475 |
* @start: Starting address of the region |
| 476 |
* @end: Ending address of the region |
| 477 |
* @walk_end Address where the scan stopped (written by kernel). |
| 478 |
* walk_end == end (address tags cleared) informs that the scan completed on entire range. |
| 479 |
* @vec: Address of page_region struct array for output |
| 480 |
* @vec_len: Length of the page_region struct array |
| 481 |
* @max_pages: Optional limit for number of returned pages (0 = disabled) |
| 482 |
* @category_inverted: PAGE_IS_* categories which values match if 0 instead of 1 |
| 483 |
* @category_mask: Skip pages for which any category doesn't match |
| 484 |
* @category_anyof_mask: Skip pages for which no category matches |
| 485 |
* @return_mask: PAGE_IS_* categories that are to be reported in `page_region`s returned |
| 486 |
*/ |
| 487 |
struct pm_scan_arg { |
| 488 |
__u64 size; |
| 489 |
__u64 flags; |
| 490 |
__u64 start; |
| 491 |
__u64 end; |
| 492 |
__u64 walk_end; |
| 493 |
__u64 vec; |
| 494 |
__u64 vec_len; |
| 495 |
__u64 max_pages; |
| 496 |
__u64 category_inverted; |
| 497 |
__u64 category_mask; |
| 498 |
__u64 category_anyof_mask; |
| 499 |
__u64 return_mask; |
| 500 |
}; |
| 501 |
|
| 502 |
/* /proc/<pid>/maps ioctl */ |
| 503 |
#define PROCMAP_QUERY _IOWR(PROCFS_IOCTL_MAGIC, 17, struct procmap_query) |
| 504 |
|
| 505 |
enum procmap_query_flags { |
| 506 |
/* |
| 507 |
* VMA permission flags. |
| 508 |
* |
| 509 |
* Can be used as part of procmap_query.query_flags field to look up |
| 510 |
* only VMAs satisfying specified subset of permissions. E.g., specifying |
| 511 |
* PROCMAP_QUERY_VMA_READABLE only will return both readable and read/write VMAs, |
| 512 |
* while having PROCMAP_QUERY_VMA_READABLE | PROCMAP_QUERY_VMA_WRITABLE will only |
| 513 |
* return read/write VMAs, though both executable/non-executable and |
| 514 |
* private/shared will be ignored. |
| 515 |
* |
| 516 |
* PROCMAP_QUERY_VMA_* flags are also returned in procmap_query.vma_flags |
| 517 |
* field to specify actual VMA permissions. |
| 518 |
*/ |
| 519 |
PROCMAP_QUERY_VMA_READABLE = 0x01, |
| 520 |
PROCMAP_QUERY_VMA_WRITABLE = 0x02, |
| 521 |
PROCMAP_QUERY_VMA_EXECUTABLE = 0x04, |
| 522 |
PROCMAP_QUERY_VMA_SHARED = 0x08, |
| 523 |
/* |
| 524 |
* Query modifier flags. |
| 525 |
* |
| 526 |
* By default VMA that covers provided address is returned, or -ENOENT |
| 527 |
* is returned. With PROCMAP_QUERY_COVERING_OR_NEXT_VMA flag set, closest |
| 528 |
* VMA with vma_start > addr will be returned if no covering VMA is |
| 529 |
* found. |
| 530 |
* |
| 531 |
* PROCMAP_QUERY_FILE_BACKED_VMA instructs query to consider only VMAs that |
| 532 |
* have file backing. Can be combined with PROCMAP_QUERY_COVERING_OR_NEXT_VMA |
| 533 |
* to iterate all VMAs with file backing. |
| 534 |
*/ |
| 535 |
PROCMAP_QUERY_COVERING_OR_NEXT_VMA = 0x10, |
| 536 |
PROCMAP_QUERY_FILE_BACKED_VMA = 0x20, |
| 537 |
}; |
| 538 |
|
| 539 |
/* |
| 540 |
* Input/output argument structured passed into ioctl() call. It can be used |
| 541 |
* to query a set of VMAs (Virtual Memory Areas) of a process. |
| 542 |
* |
| 543 |
* Each field can be one of three kinds, marked in a short comment to the |
| 544 |
* right of the field: |
| 545 |
* - "in", input argument, user has to provide this value, kernel doesn't modify it; |
| 546 |
* - "out", output argument, kernel sets this field with VMA data; |
| 547 |
* - "in/out", input and output argument; user provides initial value (used |
| 548 |
* to specify maximum allowable buffer size), and kernel sets it to actual |
| 549 |
* amount of data written (or zero, if there is no data). |
| 550 |
* |
| 551 |
* If matching VMA is found (according to criterias specified by |
| 552 |
* query_addr/query_flags, all the out fields are filled out, and ioctl() |
| 553 |
* returns 0. If there is no matching VMA, -ENOENT will be returned. |
| 554 |
* In case of any other error, negative error code other than -ENOENT is |
| 555 |
* returned. |
| 556 |
* |
| 557 |
* Most of the data is similar to the one returned as text in /proc/<pid>/maps |
| 558 |
* file, but procmap_query provides more querying flexibility. There are no |
| 559 |
* consistency guarantees between subsequent ioctl() calls, but data returned |
| 560 |
* for matched VMA is self-consistent. |
| 561 |
*/ |
| 562 |
struct procmap_query { |
| 563 |
/* Query struct size, for backwards/forward compatibility */ |
| 564 |
__u64 size; |
| 565 |
/* |
| 566 |
* Query flags, a combination of enum procmap_query_flags values. |
| 567 |
* Defines query filtering and behavior, see enum procmap_query_flags. |
| 568 |
* |
| 569 |
* Input argument, provided by user. Kernel doesn't modify it. |
| 570 |
*/ |
| 571 |
__u64 query_flags; /* in */ |
| 572 |
/* |
| 573 |
* Query address. By default, VMA that covers this address will |
| 574 |
* be looked up. PROCMAP_QUERY_* flags above modify this default |
| 575 |
* behavior further. |
| 576 |
* |
| 577 |
* Input argument, provided by user. Kernel doesn't modify it. |
| 578 |
*/ |
| 579 |
__u64 query_addr; /* in */ |
| 580 |
/* VMA starting (inclusive) and ending (exclusive) address, if VMA is found. */ |
| 581 |
__u64 vma_start; /* out */ |
| 582 |
__u64 vma_end; /* out */ |
| 583 |
/* VMA permissions flags. A combination of PROCMAP_QUERY_VMA_* flags. */ |
| 584 |
__u64 vma_flags; /* out */ |
| 585 |
/* VMA backing page size granularity. */ |
| 586 |
__u64 vma_page_size; /* out */ |
| 587 |
/* |
| 588 |
* VMA file offset. If VMA has file backing, this specifies offset |
| 589 |
* within the file that VMA's start address corresponds to. |
| 590 |
* Is set to zero if VMA has no backing file. |
| 591 |
*/ |
| 592 |
__u64 vma_offset; /* out */ |
| 593 |
/* Backing file's inode number, or zero, if VMA has no backing file. */ |
| 594 |
__u64 inode; /* out */ |
| 595 |
/* Backing file's device major/minor number, or zero, if VMA has no backing file. */ |
| 596 |
__u32 dev_major; /* out */ |
| 597 |
__u32 dev_minor; /* out */ |
| 598 |
/* |
| 599 |
* If set to non-zero value, signals the request to return VMA name |
| 600 |
* (i.e., VMA's backing file's absolute path, with " (deleted)" suffix |
| 601 |
* appended, if file was unlinked from FS) for matched VMA. VMA name |
| 602 |
* can also be some special name (e.g., "[heap]", "[stack]") or could |
| 603 |
* be even user-supplied with prctl(PR_SET_VMA, PR_SET_VMA_ANON_NAME). |
| 604 |
* |
| 605 |
* Kernel will set this field to zero, if VMA has no associated name. |
| 606 |
* Otherwise kernel will return actual amount of bytes filled in |
| 607 |
* user-supplied buffer (see vma_name_addr field below), including the |
| 608 |
* terminating zero. |
| 609 |
* |
| 610 |
* If VMA name is longer that user-supplied maximum buffer size, |
| 611 |
* -E2BIG error is returned. |
| 612 |
* |
| 613 |
* If this field is set to non-zero value, vma_name_addr should point |
| 614 |
* to valid user space memory buffer of at least vma_name_size bytes. |
| 615 |
* If set to zero, vma_name_addr should be set to zero as well |
| 616 |
*/ |
| 617 |
__u32 vma_name_size; /* in/out */ |
| 618 |
/* |
| 619 |
* If set to non-zero value, signals the request to extract and return |
| 620 |
* VMA's backing file's build ID, if the backing file is an ELF file |
| 621 |
* and it contains embedded build ID. |
| 622 |
* |
| 623 |
* Kernel will set this field to zero, if VMA has no backing file, |
| 624 |
* backing file is not an ELF file, or ELF file has no build ID |
| 625 |
* embedded. |
| 626 |
* |
| 627 |
* Build ID is a binary value (not a string). Kernel will set |
| 628 |
* build_id_size field to exact number of bytes used for build ID. |
| 629 |
* If build ID is requested and present, but needs more bytes than |
| 630 |
* user-supplied maximum buffer size (see build_id_addr field below), |
| 631 |
* -E2BIG error will be returned. |
| 632 |
* |
| 633 |
* If this field is set to non-zero value, build_id_addr should point |
| 634 |
* to valid user space memory buffer of at least build_id_size bytes. |
| 635 |
* If set to zero, build_id_addr should be set to zero as well |
| 636 |
*/ |
| 637 |
__u32 build_id_size; /* in/out */ |
| 638 |
/* |
| 639 |
* User-supplied address of a buffer of at least vma_name_size bytes |
| 640 |
* for kernel to fill with matched VMA's name (see vma_name_size field |
| 641 |
* description above for details). |
| 642 |
* |
| 643 |
* Should be set to zero if VMA name should not be returned. |
| 644 |
*/ |
| 645 |
__u64 vma_name_addr; /* in */ |
| 646 |
/* |
| 647 |
* User-supplied address of a buffer of at least build_id_size bytes |
| 648 |
* for kernel to fill with matched VMA's ELF build ID, if available |
| 649 |
* (see build_id_size field description above for details). |
| 650 |
* |
| 651 |
* Should be set to zero if build ID should not be returned. |
| 652 |
*/ |
| 653 |
__u64 build_id_addr; /* in */ |
| 654 |
}; |
| 655 |
|
| 656 |
/* |
| 657 |
* Shutdown the filesystem. |
| 658 |
*/ |
| 659 |
#define FS_IOC_SHUTDOWN _IOR('X', 125, __u32) |
| 660 |
|
| 661 |
/* |
| 662 |
* Flags for FS_IOC_SHUTDOWN |
| 663 |
*/ |
| 664 |
#define FS_SHUTDOWN_FLAGS_DEFAULT 0x0 |
| 665 |
#define FS_SHUTDOWN_FLAGS_LOGFLUSH 0x1 /* flush log but not data*/ |
| 666 |
#define FS_SHUTDOWN_FLAGS_NOLOGFLUSH 0x2 /* don't flush log nor data */ |
| 667 |
|
| 668 |
#endif /* _LINUX_FS_H */ |