| 1 |
/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ |
| 2 |
/* Copyright (c) 2011-2014 PLUMgrid, http://plumgrid.com |
| 3 |
* |
| 4 |
* This program is free software; you can redistribute it and/or |
| 5 |
* modify it under the terms of version 2 of the GNU General Public |
| 6 |
* License as published by the Free Software Foundation. |
| 7 |
*/ |
| 8 |
#ifndef __LINUX_BPF_H__ |
| 9 |
#define __LINUX_BPF_H__ |
| 10 |
|
| 11 |
#include <linux/types.h> |
| 12 |
#include <linux/bpf_common.h> |
| 13 |
|
| 14 |
/* Extended instruction set based on top of classic BPF */ |
| 15 |
|
| 16 |
/* instruction classes */ |
| 17 |
#define BPF_JMP32 0x06 /* jmp mode in word width */ |
| 18 |
#define BPF_ALU64 0x07 /* alu mode in double word width */ |
| 19 |
|
| 20 |
/* ld/ldx fields */ |
| 21 |
#define BPF_DW 0x18 /* double word (64-bit) */ |
| 22 |
#define BPF_MEMSX 0x80 /* load with sign extension */ |
| 23 |
#define BPF_ATOMIC 0xc0 /* atomic memory ops - op type in immediate */ |
| 24 |
#define BPF_XADD 0xc0 /* exclusive add - legacy name */ |
| 25 |
|
| 26 |
/* alu/jmp fields */ |
| 27 |
#define BPF_MOV 0xb0 /* mov reg to reg */ |
| 28 |
#define BPF_ARSH 0xc0 /* sign extending arithmetic shift right */ |
| 29 |
|
| 30 |
/* change endianness of a register */ |
| 31 |
#define BPF_END 0xd0 /* flags for endianness conversion: */ |
| 32 |
#define BPF_TO_LE 0x00 /* convert to little-endian */ |
| 33 |
#define BPF_TO_BE 0x08 /* convert to big-endian */ |
| 34 |
#define BPF_FROM_LE BPF_TO_LE |
| 35 |
#define BPF_FROM_BE BPF_TO_BE |
| 36 |
|
| 37 |
/* jmp encodings */ |
| 38 |
#define BPF_JNE 0x50 /* jump != */ |
| 39 |
#define BPF_JLT 0xa0 /* LT is unsigned, '<' */ |
| 40 |
#define BPF_JLE 0xb0 /* LE is unsigned, '<=' */ |
| 41 |
#define BPF_JSGT 0x60 /* SGT is signed '>', GT in x86 */ |
| 42 |
#define BPF_JSGE 0x70 /* SGE is signed '>=', GE in x86 */ |
| 43 |
#define BPF_JSLT 0xc0 /* SLT is signed, '<' */ |
| 44 |
#define BPF_JSLE 0xd0 /* SLE is signed, '<=' */ |
| 45 |
#define BPF_JCOND 0xe0 /* conditional pseudo jumps: may_goto, goto_or_nop */ |
| 46 |
#define BPF_CALL 0x80 /* function call */ |
| 47 |
#define BPF_EXIT 0x90 /* function return */ |
| 48 |
|
| 49 |
/* atomic op type fields (stored in immediate) */ |
| 50 |
#define BPF_FETCH 0x01 /* not an opcode on its own, used to build others */ |
| 51 |
#define BPF_XCHG (0xe0 | BPF_FETCH) /* atomic exchange */ |
| 52 |
#define BPF_CMPXCHG (0xf0 | BPF_FETCH) /* atomic compare-and-write */ |
| 53 |
|
| 54 |
#define BPF_LOAD_ACQ 0x100 /* load-acquire */ |
| 55 |
#define BPF_STORE_REL 0x110 /* store-release */ |
| 56 |
|
| 57 |
enum bpf_cond_pseudo_jmp { |
| 58 |
BPF_MAY_GOTO = 0, |
| 59 |
}; |
| 60 |
|
| 61 |
/* Register numbers */ |
| 62 |
enum { |
| 63 |
BPF_REG_0 = 0, |
| 64 |
BPF_REG_1, |
| 65 |
BPF_REG_2, |
| 66 |
BPF_REG_3, |
| 67 |
BPF_REG_4, |
| 68 |
BPF_REG_5, |
| 69 |
BPF_REG_6, |
| 70 |
BPF_REG_7, |
| 71 |
BPF_REG_8, |
| 72 |
BPF_REG_9, |
| 73 |
BPF_REG_10, |
| 74 |
__MAX_BPF_REG, |
| 75 |
}; |
| 76 |
|
| 77 |
/* BPF has 10 general purpose 64-bit registers and stack frame. */ |
| 78 |
#define MAX_BPF_REG __MAX_BPF_REG |
| 79 |
|
| 80 |
struct bpf_insn { |
| 81 |
__u8 code; /* opcode */ |
| 82 |
__u8 dst_reg:4; /* dest register */ |
| 83 |
__u8 src_reg:4; /* source register */ |
| 84 |
__s16 off; /* signed offset */ |
| 85 |
__s32 imm; /* signed immediate constant */ |
| 86 |
}; |
| 87 |
|
| 88 |
/* Deprecated: use struct bpf_lpm_trie_key_u8 (when the "data" member is needed for |
| 89 |
* byte access) or struct bpf_lpm_trie_key_hdr (when using an alternative type for |
| 90 |
* the trailing flexible array member) instead. |
| 91 |
*/ |
| 92 |
struct bpf_lpm_trie_key { |
| 93 |
__u32 prefixlen; /* up to 32 for AF_INET, 128 for AF_INET6 */ |
| 94 |
__u8 data[0]; /* Arbitrary size */ |
| 95 |
}; |
| 96 |
|
| 97 |
/* Header for bpf_lpm_trie_key structs */ |
| 98 |
struct bpf_lpm_trie_key_hdr { |
| 99 |
__u32 prefixlen; |
| 100 |
}; |
| 101 |
|
| 102 |
/* Key of an a BPF_MAP_TYPE_LPM_TRIE entry, with trailing byte array. */ |
| 103 |
struct bpf_lpm_trie_key_u8 { |
| 104 |
union { |
| 105 |
struct bpf_lpm_trie_key_hdr hdr; |
| 106 |
__u32 prefixlen; |
| 107 |
}; |
| 108 |
__u8 data[]; /* Arbitrary size */ |
| 109 |
}; |
| 110 |
|
| 111 |
struct bpf_cgroup_storage_key { |
| 112 |
__u64 cgroup_inode_id; /* cgroup inode id */ |
| 113 |
__u32 attach_type; /* program attach type (enum bpf_attach_type) */ |
| 114 |
}; |
| 115 |
|
| 116 |
enum bpf_cgroup_iter_order { |
| 117 |
BPF_CGROUP_ITER_ORDER_UNSPEC = 0, |
| 118 |
BPF_CGROUP_ITER_SELF_ONLY, /* process only a single object. */ |
| 119 |
BPF_CGROUP_ITER_DESCENDANTS_PRE, /* walk descendants in pre-order. */ |
| 120 |
BPF_CGROUP_ITER_DESCENDANTS_POST, /* walk descendants in post-order. */ |
| 121 |
BPF_CGROUP_ITER_ANCESTORS_UP, /* walk ancestors upward. */ |
| 122 |
/* |
| 123 |
* Walks the immediate children of the specified parent |
| 124 |
* cgroup_subsys_state. Unlike BPF_CGROUP_ITER_DESCENDANTS_PRE, |
| 125 |
* BPF_CGROUP_ITER_DESCENDANTS_POST, and BPF_CGROUP_ITER_ANCESTORS_UP |
| 126 |
* the iterator does not include the specified parent as one of the |
| 127 |
* returned iterator elements. |
| 128 |
*/ |
| 129 |
BPF_CGROUP_ITER_CHILDREN, |
| 130 |
}; |
| 131 |
|
| 132 |
union bpf_iter_link_info { |
| 133 |
struct { |
| 134 |
__u32 map_fd; |
| 135 |
} map; |
| 136 |
struct { |
| 137 |
enum bpf_cgroup_iter_order order; |
| 138 |
|
| 139 |
/* At most one of cgroup_fd and cgroup_id can be non-zero. If |
| 140 |
* both are zero, the walk starts from the default cgroup v2 |
| 141 |
* root. For walking v1 hierarchy, one should always explicitly |
| 142 |
* specify cgroup_fd. |
| 143 |
*/ |
| 144 |
__u32 cgroup_fd; |
| 145 |
__u64 cgroup_id; |
| 146 |
} cgroup; |
| 147 |
/* Parameters of task iterators. */ |
| 148 |
struct { |
| 149 |
__u32 tid; |
| 150 |
__u32 pid; |
| 151 |
__u32 pid_fd; |
| 152 |
} task; |
| 153 |
}; |
| 154 |
|
| 155 |
/* BPF syscall commands, see bpf(2) man-page for more details. */ |
| 156 |
/** |
| 157 |
* DOC: eBPF Syscall Preamble |
| 158 |
* |
| 159 |
* The operation to be performed by the **bpf**\ () system call is determined |
| 160 |
* by the *cmd* argument. Each operation takes an accompanying argument, |
| 161 |
* provided via *attr*, which is a pointer to a union of type *bpf_attr* (see |
| 162 |
* below). The size argument is the size of the union pointed to by *attr*. |
| 163 |
*/ |
| 164 |
/** |
| 165 |
* DOC: eBPF Syscall Commands |
| 166 |
* |
| 167 |
* BPF_MAP_CREATE |
| 168 |
* Description |
| 169 |
* Create a map and return a file descriptor that refers to the |
| 170 |
* map. The close-on-exec file descriptor flag (see **fcntl**\ (2)) |
| 171 |
* is automatically enabled for the new file descriptor. |
| 172 |
* |
| 173 |
* Applying **close**\ (2) to the file descriptor returned by |
| 174 |
* **BPF_MAP_CREATE** will delete the map (but see NOTES). |
| 175 |
* |
| 176 |
* Return |
| 177 |
* A new file descriptor (a nonnegative integer), or -1 if an |
| 178 |
* error occurred (in which case, *errno* is set appropriately). |
| 179 |
* |
| 180 |
* BPF_MAP_LOOKUP_ELEM |
| 181 |
* Description |
| 182 |
* Look up an element with a given *key* in the map referred to |
| 183 |
* by the file descriptor *map_fd*. |
| 184 |
* |
| 185 |
* The *flags* argument may be specified as one of the |
| 186 |
* following: |
| 187 |
* |
| 188 |
* **BPF_F_LOCK** |
| 189 |
* Look up the value of a spin-locked map without |
| 190 |
* returning the lock. This must be specified if the |
| 191 |
* elements contain a spinlock. |
| 192 |
* |
| 193 |
* Return |
| 194 |
* Returns zero on success. On error, -1 is returned and *errno* |
| 195 |
* is set appropriately. |
| 196 |
* |
| 197 |
* BPF_MAP_UPDATE_ELEM |
| 198 |
* Description |
| 199 |
* Create or update an element (key/value pair) in a specified map. |
| 200 |
* |
| 201 |
* The *flags* argument should be specified as one of the |
| 202 |
* following: |
| 203 |
* |
| 204 |
* **BPF_ANY** |
| 205 |
* Create a new element or update an existing element. |
| 206 |
* **BPF_NOEXIST** |
| 207 |
* Create a new element only if it did not exist. |
| 208 |
* **BPF_EXIST** |
| 209 |
* Update an existing element. |
| 210 |
* **BPF_F_LOCK** |
| 211 |
* Update a spin_lock-ed map element. |
| 212 |
* |
| 213 |
* Return |
| 214 |
* Returns zero on success. On error, -1 is returned and *errno* |
| 215 |
* is set appropriately. |
| 216 |
* |
| 217 |
* May set *errno* to **EINVAL**, **EPERM**, **ENOMEM**, |
| 218 |
* **E2BIG**, **EEXIST**, or **ENOENT**. |
| 219 |
* |
| 220 |
* **E2BIG** |
| 221 |
* The number of elements in the map reached the |
| 222 |
* *max_entries* limit specified at map creation time. |
| 223 |
* **EEXIST** |
| 224 |
* If *flags* specifies **BPF_NOEXIST** and the element |
| 225 |
* with *key* already exists in the map. |
| 226 |
* **ENOENT** |
| 227 |
* If *flags* specifies **BPF_EXIST** and the element with |
| 228 |
* *key* does not exist in the map. |
| 229 |
* |
| 230 |
* BPF_MAP_DELETE_ELEM |
| 231 |
* Description |
| 232 |
* Look up and delete an element by key in a specified map. |
| 233 |
* |
| 234 |
* Return |
| 235 |
* Returns zero on success. On error, -1 is returned and *errno* |
| 236 |
* is set appropriately. |
| 237 |
* |
| 238 |
* BPF_MAP_GET_NEXT_KEY |
| 239 |
* Description |
| 240 |
* Look up an element by key in a specified map and return the key |
| 241 |
* of the next element. Can be used to iterate over all elements |
| 242 |
* in the map. |
| 243 |
* |
| 244 |
* Return |
| 245 |
* Returns zero on success. On error, -1 is returned and *errno* |
| 246 |
* is set appropriately. |
| 247 |
* |
| 248 |
* The following cases can be used to iterate over all elements of |
| 249 |
* the map: |
| 250 |
* |
| 251 |
* * If *key* is not found, the operation returns zero and sets |
| 252 |
* the *next_key* pointer to the key of the first element. |
| 253 |
* * If *key* is found, the operation returns zero and sets the |
| 254 |
* *next_key* pointer to the key of the next element. |
| 255 |
* * If *key* is the last element, returns -1 and *errno* is set |
| 256 |
* to **ENOENT**. |
| 257 |
* |
| 258 |
* May set *errno* to **ENOMEM**, **EFAULT**, **EPERM**, or |
| 259 |
* **EINVAL** on error. |
| 260 |
* |
| 261 |
* BPF_PROG_LOAD |
| 262 |
* Description |
| 263 |
* Verify and load an eBPF program, returning a new file |
| 264 |
* descriptor associated with the program. |
| 265 |
* |
| 266 |
* Applying **close**\ (2) to the file descriptor returned by |
| 267 |
* **BPF_PROG_LOAD** will unload the eBPF program (but see NOTES). |
| 268 |
* |
| 269 |
* The close-on-exec file descriptor flag (see **fcntl**\ (2)) is |
| 270 |
* automatically enabled for the new file descriptor. |
| 271 |
* |
| 272 |
* Return |
| 273 |
* A new file descriptor (a nonnegative integer), or -1 if an |
| 274 |
* error occurred (in which case, *errno* is set appropriately). |
| 275 |
* |
| 276 |
* BPF_OBJ_PIN |
| 277 |
* Description |
| 278 |
* Pin an eBPF program or map referred by the specified *bpf_fd* |
| 279 |
* to the provided *pathname* on the filesystem. |
| 280 |
* |
| 281 |
* The *pathname* argument must not contain a dot ("."). |
| 282 |
* |
| 283 |
* On success, *pathname* retains a reference to the eBPF object, |
| 284 |
* preventing deallocation of the object when the original |
| 285 |
* *bpf_fd* is closed. This allow the eBPF object to live beyond |
| 286 |
* **close**\ (\ *bpf_fd*\ ), and hence the lifetime of the parent |
| 287 |
* process. |
| 288 |
* |
| 289 |
* Applying **unlink**\ (2) or similar calls to the *pathname* |
| 290 |
* unpins the object from the filesystem, removing the reference. |
| 291 |
* If no other file descriptors or filesystem nodes refer to the |
| 292 |
* same object, it will be deallocated (see NOTES). |
| 293 |
* |
| 294 |
* The filesystem type for the parent directory of *pathname* must |
| 295 |
* be **BPF_FS_MAGIC**. |
| 296 |
* |
| 297 |
* Return |
| 298 |
* Returns zero on success. On error, -1 is returned and *errno* |
| 299 |
* is set appropriately. |
| 300 |
* |
| 301 |
* BPF_OBJ_GET |
| 302 |
* Description |
| 303 |
* Open a file descriptor for the eBPF object pinned to the |
| 304 |
* specified *pathname*. |
| 305 |
* |
| 306 |
* Return |
| 307 |
* A new file descriptor (a nonnegative integer), or -1 if an |
| 308 |
* error occurred (in which case, *errno* is set appropriately). |
| 309 |
* |
| 310 |
* BPF_PROG_ATTACH |
| 311 |
* Description |
| 312 |
* Attach an eBPF program to a *target_fd* at the specified |
| 313 |
* *attach_type* hook. |
| 314 |
* |
| 315 |
* The *attach_type* specifies the eBPF attachment point to |
| 316 |
* attach the program to, and must be one of *bpf_attach_type* |
| 317 |
* (see below). |
| 318 |
* |
| 319 |
* The *attach_bpf_fd* must be a valid file descriptor for a |
| 320 |
* loaded eBPF program of a cgroup, flow dissector, LIRC, sockmap |
| 321 |
* or sock_ops type corresponding to the specified *attach_type*. |
| 322 |
* |
| 323 |
* The *target_fd* must be a valid file descriptor for a kernel |
| 324 |
* object which depends on the attach type of *attach_bpf_fd*: |
| 325 |
* |
| 326 |
* **BPF_PROG_TYPE_CGROUP_DEVICE**, |
| 327 |
* **BPF_PROG_TYPE_CGROUP_SKB**, |
| 328 |
* **BPF_PROG_TYPE_CGROUP_SOCK**, |
| 329 |
* **BPF_PROG_TYPE_CGROUP_SOCK_ADDR**, |
| 330 |
* **BPF_PROG_TYPE_CGROUP_SOCKOPT**, |
| 331 |
* **BPF_PROG_TYPE_CGROUP_SYSCTL**, |
| 332 |
* **BPF_PROG_TYPE_SOCK_OPS** |
| 333 |
* |
| 334 |
* Control Group v2 hierarchy with the eBPF controller |
| 335 |
* enabled. Requires the kernel to be compiled with |
| 336 |
* **CONFIG_CGROUP_BPF**. |
| 337 |
* |
| 338 |
* **BPF_PROG_TYPE_FLOW_DISSECTOR** |
| 339 |
* |
| 340 |
* Network namespace (eg /proc/self/ns/net). |
| 341 |
* |
| 342 |
* **BPF_PROG_TYPE_LIRC_MODE2** |
| 343 |
* |
| 344 |
* LIRC device path (eg /dev/lircN). Requires the kernel |
| 345 |
* to be compiled with **CONFIG_BPF_LIRC_MODE2**. |
| 346 |
* |
| 347 |
* **BPF_PROG_TYPE_SK_SKB**, |
| 348 |
* **BPF_PROG_TYPE_SK_MSG** |
| 349 |
* |
| 350 |
* eBPF map of socket type (eg **BPF_MAP_TYPE_SOCKHASH**). |
| 351 |
* |
| 352 |
* Return |
| 353 |
* Returns zero on success. On error, -1 is returned and *errno* |
| 354 |
* is set appropriately. |
| 355 |
* |
| 356 |
* BPF_PROG_DETACH |
| 357 |
* Description |
| 358 |
* Detach the eBPF program associated with the *target_fd* at the |
| 359 |
* hook specified by *attach_type*. The program must have been |
| 360 |
* previously attached using **BPF_PROG_ATTACH**. |
| 361 |
* |
| 362 |
* Return |
| 363 |
* Returns zero on success. On error, -1 is returned and *errno* |
| 364 |
* is set appropriately. |
| 365 |
* |
| 366 |
* BPF_PROG_TEST_RUN |
| 367 |
* Description |
| 368 |
* Run the eBPF program associated with the *prog_fd* a *repeat* |
| 369 |
* number of times against a provided program context *ctx_in* and |
| 370 |
* data *data_in*, and return the modified program context |
| 371 |
* *ctx_out*, *data_out* (for example, packet data), result of the |
| 372 |
* execution *retval*, and *duration* of the test run. |
| 373 |
* |
| 374 |
* The sizes of the buffers provided as input and output |
| 375 |
* parameters *ctx_in*, *ctx_out*, *data_in*, and *data_out* must |
| 376 |
* be provided in the corresponding variables *ctx_size_in*, |
| 377 |
* *ctx_size_out*, *data_size_in*, and/or *data_size_out*. If any |
| 378 |
* of these parameters are not provided (ie set to NULL), the |
| 379 |
* corresponding size field must be zero. |
| 380 |
* |
| 381 |
* Some program types have particular requirements: |
| 382 |
* |
| 383 |
* **BPF_PROG_TYPE_SK_LOOKUP** |
| 384 |
* *data_in* and *data_out* must be NULL. |
| 385 |
* |
| 386 |
* **BPF_PROG_TYPE_RAW_TRACEPOINT**, |
| 387 |
* **BPF_PROG_TYPE_RAW_TRACEPOINT_WRITABLE** |
| 388 |
* |
| 389 |
* *ctx_out*, *data_in* and *data_out* must be NULL. |
| 390 |
* *repeat* must be zero. |
| 391 |
* |
| 392 |
* BPF_PROG_RUN is an alias for BPF_PROG_TEST_RUN. |
| 393 |
* |
| 394 |
* Return |
| 395 |
* Returns zero on success. On error, -1 is returned and *errno* |
| 396 |
* is set appropriately. |
| 397 |
* |
| 398 |
* **ENOSPC** |
| 399 |
* Either *data_size_out* or *ctx_size_out* is too small. |
| 400 |
* **ENOTSUPP** |
| 401 |
* This command is not supported by the program type of |
| 402 |
* the program referred to by *prog_fd*. |
| 403 |
* |
| 404 |
* BPF_PROG_GET_NEXT_ID |
| 405 |
* Description |
| 406 |
* Fetch the next eBPF program currently loaded into the kernel. |
| 407 |
* |
| 408 |
* Looks for the eBPF program with an id greater than *start_id* |
| 409 |
* and updates *next_id* on success. If no other eBPF programs |
| 410 |
* remain with ids higher than *start_id*, returns -1 and sets |
| 411 |
* *errno* to **ENOENT**. |
| 412 |
* |
| 413 |
* Return |
| 414 |
* Returns zero on success. On error, or when no id remains, -1 |
| 415 |
* is returned and *errno* is set appropriately. |
| 416 |
* |
| 417 |
* BPF_MAP_GET_NEXT_ID |
| 418 |
* Description |
| 419 |
* Fetch the next eBPF map currently loaded into the kernel. |
| 420 |
* |
| 421 |
* Looks for the eBPF map with an id greater than *start_id* |
| 422 |
* and updates *next_id* on success. If no other eBPF maps |
| 423 |
* remain with ids higher than *start_id*, returns -1 and sets |
| 424 |
* *errno* to **ENOENT**. |
| 425 |
* |
| 426 |
* Return |
| 427 |
* Returns zero on success. On error, or when no id remains, -1 |
| 428 |
* is returned and *errno* is set appropriately. |
| 429 |
* |
| 430 |
* BPF_PROG_GET_FD_BY_ID |
| 431 |
* Description |
| 432 |
* Open a file descriptor for the eBPF program corresponding to |
| 433 |
* *prog_id*. |
| 434 |
* |
| 435 |
* Return |
| 436 |
* A new file descriptor (a nonnegative integer), or -1 if an |
| 437 |
* error occurred (in which case, *errno* is set appropriately). |
| 438 |
* |
| 439 |
* BPF_MAP_GET_FD_BY_ID |
| 440 |
* Description |
| 441 |
* Open a file descriptor for the eBPF map corresponding to |
| 442 |
* *map_id*. |
| 443 |
* |
| 444 |
* Return |
| 445 |
* A new file descriptor (a nonnegative integer), or -1 if an |
| 446 |
* error occurred (in which case, *errno* is set appropriately). |
| 447 |
* |
| 448 |
* BPF_OBJ_GET_INFO_BY_FD |
| 449 |
* Description |
| 450 |
* Obtain information about the eBPF object corresponding to |
| 451 |
* *bpf_fd*. |
| 452 |
* |
| 453 |
* Populates up to *info_len* bytes of *info*, which will be in |
| 454 |
* one of the following formats depending on the eBPF object type |
| 455 |
* of *bpf_fd*: |
| 456 |
* |
| 457 |
* * **struct bpf_prog_info** |
| 458 |
* * **struct bpf_map_info** |
| 459 |
* * **struct bpf_btf_info** |
| 460 |
* * **struct bpf_link_info** |
| 461 |
* * **struct bpf_token_info** |
| 462 |
* |
| 463 |
* Return |
| 464 |
* Returns zero on success. On error, -1 is returned and *errno* |
| 465 |
* is set appropriately. |
| 466 |
* |
| 467 |
* BPF_PROG_QUERY |
| 468 |
* Description |
| 469 |
* Obtain information about eBPF programs associated with the |
| 470 |
* specified *attach_type* hook. |
| 471 |
* |
| 472 |
* The *target_fd* must be a valid file descriptor for a kernel |
| 473 |
* object which depends on the attach type of *attach_bpf_fd*: |
| 474 |
* |
| 475 |
* **BPF_PROG_TYPE_CGROUP_DEVICE**, |
| 476 |
* **BPF_PROG_TYPE_CGROUP_SKB**, |
| 477 |
* **BPF_PROG_TYPE_CGROUP_SOCK**, |
| 478 |
* **BPF_PROG_TYPE_CGROUP_SOCK_ADDR**, |
| 479 |
* **BPF_PROG_TYPE_CGROUP_SOCKOPT**, |
| 480 |
* **BPF_PROG_TYPE_CGROUP_SYSCTL**, |
| 481 |
* **BPF_PROG_TYPE_SOCK_OPS** |
| 482 |
* |
| 483 |
* Control Group v2 hierarchy with the eBPF controller |
| 484 |
* enabled. Requires the kernel to be compiled with |
| 485 |
* **CONFIG_CGROUP_BPF**. |
| 486 |
* |
| 487 |
* **BPF_PROG_TYPE_FLOW_DISSECTOR** |
| 488 |
* |
| 489 |
* Network namespace (eg /proc/self/ns/net). |
| 490 |
* |
| 491 |
* **BPF_PROG_TYPE_LIRC_MODE2** |
| 492 |
* |
| 493 |
* LIRC device path (eg /dev/lircN). Requires the kernel |
| 494 |
* to be compiled with **CONFIG_BPF_LIRC_MODE2**. |
| 495 |
* |
| 496 |
* **BPF_PROG_QUERY** always fetches the number of programs |
| 497 |
* attached and the *attach_flags* which were used to attach those |
| 498 |
* programs. Additionally, if *prog_ids* is nonzero and the number |
| 499 |
* of attached programs is less than *prog_cnt*, populates |
| 500 |
* *prog_ids* with the eBPF program ids of the programs attached |
| 501 |
* at *target_fd*. |
| 502 |
* |
| 503 |
* The following flags may alter the result: |
| 504 |
* |
| 505 |
* **BPF_F_QUERY_EFFECTIVE** |
| 506 |
* Only return information regarding programs which are |
| 507 |
* currently effective at the specified *target_fd*. |
| 508 |
* |
| 509 |
* Return |
| 510 |
* Returns zero on success. On error, -1 is returned and *errno* |
| 511 |
* is set appropriately. |
| 512 |
* |
| 513 |
* BPF_RAW_TRACEPOINT_OPEN |
| 514 |
* Description |
| 515 |
* Attach an eBPF program to a tracepoint *name* to access kernel |
| 516 |
* internal arguments of the tracepoint in their raw form. |
| 517 |
* |
| 518 |
* The *prog_fd* must be a valid file descriptor associated with |
| 519 |
* a loaded eBPF program of type **BPF_PROG_TYPE_RAW_TRACEPOINT**. |
| 520 |
* |
| 521 |
* No ABI guarantees are made about the content of tracepoint |
| 522 |
* arguments exposed to the corresponding eBPF program. |
| 523 |
* |
| 524 |
* Applying **close**\ (2) to the file descriptor returned by |
| 525 |
* **BPF_RAW_TRACEPOINT_OPEN** will delete the map (but see NOTES). |
| 526 |
* |
| 527 |
* Return |
| 528 |
* A new file descriptor (a nonnegative integer), or -1 if an |
| 529 |
* error occurred (in which case, *errno* is set appropriately). |
| 530 |
* |
| 531 |
* BPF_BTF_LOAD |
| 532 |
* Description |
| 533 |
* Verify and load BPF Type Format (BTF) metadata into the kernel, |
| 534 |
* returning a new file descriptor associated with the metadata. |
| 535 |
* BTF is described in more detail at |
| 536 |
* https://www.kernel.org/doc/html/latest/bpf/btf.html. |
| 537 |
* |
| 538 |
* The *btf* parameter must point to valid memory providing |
| 539 |
* *btf_size* bytes of BTF binary metadata. |
| 540 |
* |
| 541 |
* The returned file descriptor can be passed to other **bpf**\ () |
| 542 |
* subcommands such as **BPF_PROG_LOAD** or **BPF_MAP_CREATE** to |
| 543 |
* associate the BTF with those objects. |
| 544 |
* |
| 545 |
* Similar to **BPF_PROG_LOAD**, **BPF_BTF_LOAD** has optional |
| 546 |
* parameters to specify a *btf_log_buf*, *btf_log_size* and |
| 547 |
* *btf_log_level* which allow the kernel to return freeform log |
| 548 |
* output regarding the BTF verification process. |
| 549 |
* |
| 550 |
* Return |
| 551 |
* A new file descriptor (a nonnegative integer), or -1 if an |
| 552 |
* error occurred (in which case, *errno* is set appropriately). |
| 553 |
* |
| 554 |
* BPF_BTF_GET_FD_BY_ID |
| 555 |
* Description |
| 556 |
* Open a file descriptor for the BPF Type Format (BTF) |
| 557 |
* corresponding to *btf_id*. |
| 558 |
* |
| 559 |
* Return |
| 560 |
* A new file descriptor (a nonnegative integer), or -1 if an |
| 561 |
* error occurred (in which case, *errno* is set appropriately). |
| 562 |
* |
| 563 |
* BPF_TASK_FD_QUERY |
| 564 |
* Description |
| 565 |
* Obtain information about eBPF programs associated with the |
| 566 |
* target process identified by *pid* and *fd*. |
| 567 |
* |
| 568 |
* If the *pid* and *fd* are associated with a tracepoint, kprobe |
| 569 |
* or uprobe perf event, then the *prog_id* and *fd_type* will |
| 570 |
* be populated with the eBPF program id and file descriptor type |
| 571 |
* of type **bpf_task_fd_type**. If associated with a kprobe or |
| 572 |
* uprobe, the *probe_offset* and *probe_addr* will also be |
| 573 |
* populated. Optionally, if *buf* is provided, then up to |
| 574 |
* *buf_len* bytes of *buf* will be populated with the name of |
| 575 |
* the tracepoint, kprobe or uprobe. |
| 576 |
* |
| 577 |
* The resulting *prog_id* may be introspected in deeper detail |
| 578 |
* using **BPF_PROG_GET_FD_BY_ID** and **BPF_OBJ_GET_INFO_BY_FD**. |
| 579 |
* |
| 580 |
* Return |
| 581 |
* Returns zero on success. On error, -1 is returned and *errno* |
| 582 |
* is set appropriately. |
| 583 |
* |
| 584 |
* BPF_MAP_LOOKUP_AND_DELETE_ELEM |
| 585 |
* Description |
| 586 |
* Look up an element with the given *key* in the map referred to |
| 587 |
* by the file descriptor *fd*, and if found, delete the element. |
| 588 |
* |
| 589 |
* For **BPF_MAP_TYPE_QUEUE** and **BPF_MAP_TYPE_STACK** map |
| 590 |
* types, the *flags* argument needs to be set to 0, but for other |
| 591 |
* map types, it may be specified as: |
| 592 |
* |
| 593 |
* **BPF_F_LOCK** |
| 594 |
* Look up and delete the value of a spin-locked map |
| 595 |
* without returning the lock. This must be specified if |
| 596 |
* the elements contain a spinlock. |
| 597 |
* |
| 598 |
* The **BPF_MAP_TYPE_QUEUE** and **BPF_MAP_TYPE_STACK** map types |
| 599 |
* implement this command as a "pop" operation, deleting the top |
| 600 |
* element rather than one corresponding to *key*. |
| 601 |
* The *key* and *key_len* parameters should be zeroed when |
| 602 |
* issuing this operation for these map types. |
| 603 |
* |
| 604 |
* This command is only valid for the following map types: |
| 605 |
* * **BPF_MAP_TYPE_QUEUE** |
| 606 |
* * **BPF_MAP_TYPE_STACK** |
| 607 |
* * **BPF_MAP_TYPE_HASH** |
| 608 |
* * **BPF_MAP_TYPE_PERCPU_HASH** |
| 609 |
* * **BPF_MAP_TYPE_LRU_HASH** |
| 610 |
* * **BPF_MAP_TYPE_LRU_PERCPU_HASH** |
| 611 |
* |
| 612 |
* Return |
| 613 |
* Returns zero on success. On error, -1 is returned and *errno* |
| 614 |
* is set appropriately. |
| 615 |
* |
| 616 |
* BPF_MAP_FREEZE |
| 617 |
* Description |
| 618 |
* Freeze the permissions of the specified map. |
| 619 |
* |
| 620 |
* Write permissions may be frozen by passing zero *flags*. |
| 621 |
* Upon success, no future syscall invocations may alter the |
| 622 |
* map state of *map_fd*. Write operations from eBPF programs |
| 623 |
* are still possible for a frozen map. |
| 624 |
* |
| 625 |
* Not supported for maps of type **BPF_MAP_TYPE_STRUCT_OPS**. |
| 626 |
* |
| 627 |
* Return |
| 628 |
* Returns zero on success. On error, -1 is returned and *errno* |
| 629 |
* is set appropriately. |
| 630 |
* |
| 631 |
* BPF_BTF_GET_NEXT_ID |
| 632 |
* Description |
| 633 |
* Fetch the next BPF Type Format (BTF) object currently loaded |
| 634 |
* into the kernel. |
| 635 |
* |
| 636 |
* Looks for the BTF object with an id greater than *start_id* |
| 637 |
* and updates *next_id* on success. If no other BTF objects |
| 638 |
* remain with ids higher than *start_id*, returns -1 and sets |
| 639 |
* *errno* to **ENOENT**. |
| 640 |
* |
| 641 |
* Return |
| 642 |
* Returns zero on success. On error, or when no id remains, -1 |
| 643 |
* is returned and *errno* is set appropriately. |
| 644 |
* |
| 645 |
* BPF_MAP_LOOKUP_BATCH |
| 646 |
* Description |
| 647 |
* Iterate and fetch multiple elements in a map. |
| 648 |
* |
| 649 |
* Two opaque values are used to manage batch operations, |
| 650 |
* *in_batch* and *out_batch*. Initially, *in_batch* must be set |
| 651 |
* to NULL to begin the batched operation. After each subsequent |
| 652 |
* **BPF_MAP_LOOKUP_BATCH**, the caller should pass the resultant |
| 653 |
* *out_batch* as the *in_batch* for the next operation to |
| 654 |
* continue iteration from the current point. Both *in_batch* and |
| 655 |
* *out_batch* must point to memory large enough to hold a key, |
| 656 |
* except for maps of type **BPF_MAP_TYPE_{HASH, PERCPU_HASH, |
| 657 |
* LRU_HASH, LRU_PERCPU_HASH}**, for which batch parameters |
| 658 |
* must be at least 4 bytes wide regardless of key size. |
| 659 |
* |
| 660 |
* The *keys* and *values* are output parameters which must point |
| 661 |
* to memory large enough to hold *count* items based on the key |
| 662 |
* and value size of the map *map_fd*. The *keys* buffer must be |
| 663 |
* of *key_size* * *count*. The *values* buffer must be of |
| 664 |
* *value_size* * *count*. |
| 665 |
* |
| 666 |
* The *elem_flags* argument may be specified as one of the |
| 667 |
* following: |
| 668 |
* |
| 669 |
* **BPF_F_LOCK** |
| 670 |
* Look up the value of a spin-locked map without |
| 671 |
* returning the lock. This must be specified if the |
| 672 |
* elements contain a spinlock. |
| 673 |
* |
| 674 |
* On success, *count* elements from the map are copied into the |
| 675 |
* user buffer, with the keys copied into *keys* and the values |
| 676 |
* copied into the corresponding indices in *values*. |
| 677 |
* |
| 678 |
* If an error is returned and *errno* is not **EFAULT**, *count* |
| 679 |
* is set to the number of successfully processed elements. |
| 680 |
* |
| 681 |
* Return |
| 682 |
* Returns zero on success. On error, -1 is returned and *errno* |
| 683 |
* is set appropriately. |
| 684 |
* |
| 685 |
* May set *errno* to **ENOSPC** to indicate that *keys* or |
| 686 |
* *values* is too small to dump an entire bucket during |
| 687 |
* iteration of a hash-based map type. |
| 688 |
* |
| 689 |
* BPF_MAP_LOOKUP_AND_DELETE_BATCH |
| 690 |
* Description |
| 691 |
* Iterate and delete all elements in a map. |
| 692 |
* |
| 693 |
* This operation has the same behavior as |
| 694 |
* **BPF_MAP_LOOKUP_BATCH** with two exceptions: |
| 695 |
* |
| 696 |
* * Every element that is successfully returned is also deleted |
| 697 |
* from the map. This is at least *count* elements. Note that |
| 698 |
* *count* is both an input and an output parameter. |
| 699 |
* * Upon returning with *errno* set to **EFAULT**, up to |
| 700 |
* *count* elements may be deleted without returning the keys |
| 701 |
* and values of the deleted elements. |
| 702 |
* |
| 703 |
* Return |
| 704 |
* Returns zero on success. On error, -1 is returned and *errno* |
| 705 |
* is set appropriately. |
| 706 |
* |
| 707 |
* BPF_MAP_UPDATE_BATCH |
| 708 |
* Description |
| 709 |
* Update multiple elements in a map by *key*. |
| 710 |
* |
| 711 |
* The *keys* and *values* are input parameters which must point |
| 712 |
* to memory large enough to hold *count* items based on the key |
| 713 |
* and value size of the map *map_fd*. The *keys* buffer must be |
| 714 |
* of *key_size* * *count*. The *values* buffer must be of |
| 715 |
* *value_size* * *count*. |
| 716 |
* |
| 717 |
* Each element specified in *keys* is sequentially updated to the |
| 718 |
* value in the corresponding index in *values*. The *in_batch* |
| 719 |
* and *out_batch* parameters are ignored and should be zeroed. |
| 720 |
* |
| 721 |
* The *elem_flags* argument should be specified as one of the |
| 722 |
* following: |
| 723 |
* |
| 724 |
* **BPF_ANY** |
| 725 |
* Create new elements or update a existing elements. |
| 726 |
* **BPF_NOEXIST** |
| 727 |
* Create new elements only if they do not exist. |
| 728 |
* **BPF_EXIST** |
| 729 |
* Update existing elements. |
| 730 |
* **BPF_F_LOCK** |
| 731 |
* Update spin_lock-ed map elements. This must be |
| 732 |
* specified if the map value contains a spinlock. |
| 733 |
* |
| 734 |
* On success, *count* elements from the map are updated. |
| 735 |
* |
| 736 |
* If an error is returned and *errno* is not **EFAULT**, *count* |
| 737 |
* is set to the number of successfully processed elements. |
| 738 |
* |
| 739 |
* Return |
| 740 |
* Returns zero on success. On error, -1 is returned and *errno* |
| 741 |
* is set appropriately. |
| 742 |
* |
| 743 |
* May set *errno* to **EINVAL**, **EPERM**, **ENOMEM**, or |
| 744 |
* **E2BIG**. **E2BIG** indicates that the number of elements in |
| 745 |
* the map reached the *max_entries* limit specified at map |
| 746 |
* creation time. |
| 747 |
* |
| 748 |
* May set *errno* to one of the following error codes under |
| 749 |
* specific circumstances: |
| 750 |
* |
| 751 |
* **EEXIST** |
| 752 |
* If *flags* specifies **BPF_NOEXIST** and the element |
| 753 |
* with *key* already exists in the map. |
| 754 |
* **ENOENT** |
| 755 |
* If *flags* specifies **BPF_EXIST** and the element with |
| 756 |
* *key* does not exist in the map. |
| 757 |
* |
| 758 |
* BPF_MAP_DELETE_BATCH |
| 759 |
* Description |
| 760 |
* Delete multiple elements in a map by *key*. |
| 761 |
* |
| 762 |
* The *keys* parameter is an input parameter which must point |
| 763 |
* to memory large enough to hold *count* items based on the key |
| 764 |
* size of the map *map_fd*, that is, *key_size* * *count*. |
| 765 |
* |
| 766 |
* Each element specified in *keys* is sequentially deleted. The |
| 767 |
* *in_batch*, *out_batch*, and *values* parameters are ignored |
| 768 |
* and should be zeroed. |
| 769 |
* |
| 770 |
* The *elem_flags* argument may be specified as one of the |
| 771 |
* following: |
| 772 |
* |
| 773 |
* **BPF_F_LOCK** |
| 774 |
* Look up the value of a spin-locked map without |
| 775 |
* returning the lock. This must be specified if the |
| 776 |
* elements contain a spinlock. |
| 777 |
* |
| 778 |
* On success, *count* elements from the map are updated. |
| 779 |
* |
| 780 |
* If an error is returned and *errno* is not **EFAULT**, *count* |
| 781 |
* is set to the number of successfully processed elements. If |
| 782 |
* *errno* is **EFAULT**, up to *count* elements may be been |
| 783 |
* deleted. |
| 784 |
* |
| 785 |
* Return |
| 786 |
* Returns zero on success. On error, -1 is returned and *errno* |
| 787 |
* is set appropriately. |
| 788 |
* |
| 789 |
* BPF_LINK_CREATE |
| 790 |
* Description |
| 791 |
* Attach an eBPF program to a *target_fd* at the specified |
| 792 |
* *attach_type* hook and return a file descriptor handle for |
| 793 |
* managing the link. |
| 794 |
* |
| 795 |
* Return |
| 796 |
* A new file descriptor (a nonnegative integer), or -1 if an |
| 797 |
* error occurred (in which case, *errno* is set appropriately). |
| 798 |
* |
| 799 |
* BPF_LINK_UPDATE |
| 800 |
* Description |
| 801 |
* Update the eBPF program in the specified *link_fd* to |
| 802 |
* *new_prog_fd*. |
| 803 |
* |
| 804 |
* Return |
| 805 |
* Returns zero on success. On error, -1 is returned and *errno* |
| 806 |
* is set appropriately. |
| 807 |
* |
| 808 |
* BPF_LINK_GET_FD_BY_ID |
| 809 |
* Description |
| 810 |
* Open a file descriptor for the eBPF Link corresponding to |
| 811 |
* *link_id*. |
| 812 |
* |
| 813 |
* Return |
| 814 |
* A new file descriptor (a nonnegative integer), or -1 if an |
| 815 |
* error occurred (in which case, *errno* is set appropriately). |
| 816 |
* |
| 817 |
* BPF_LINK_GET_NEXT_ID |
| 818 |
* Description |
| 819 |
* Fetch the next eBPF link currently loaded into the kernel. |
| 820 |
* |
| 821 |
* Looks for the eBPF link with an id greater than *start_id* |
| 822 |
* and updates *next_id* on success. If no other eBPF links |
| 823 |
* remain with ids higher than *start_id*, returns -1 and sets |
| 824 |
* *errno* to **ENOENT**. |
| 825 |
* |
| 826 |
* Return |
| 827 |
* Returns zero on success. On error, or when no id remains, -1 |
| 828 |
* is returned and *errno* is set appropriately. |
| 829 |
* |
| 830 |
* BPF_ENABLE_STATS |
| 831 |
* Description |
| 832 |
* Enable eBPF runtime statistics gathering. |
| 833 |
* |
| 834 |
* Runtime statistics gathering for the eBPF runtime is disabled |
| 835 |
* by default to minimize the corresponding performance overhead. |
| 836 |
* This command enables statistics globally. |
| 837 |
* |
| 838 |
* Multiple programs may independently enable statistics. |
| 839 |
* After gathering the desired statistics, eBPF runtime statistics |
| 840 |
* may be disabled again by calling **close**\ (2) for the file |
| 841 |
* descriptor returned by this function. Statistics will only be |
| 842 |
* disabled system-wide when all outstanding file descriptors |
| 843 |
* returned by prior calls for this subcommand are closed. |
| 844 |
* |
| 845 |
* Return |
| 846 |
* A new file descriptor (a nonnegative integer), or -1 if an |
| 847 |
* error occurred (in which case, *errno* is set appropriately). |
| 848 |
* |
| 849 |
* BPF_ITER_CREATE |
| 850 |
* Description |
| 851 |
* Create an iterator on top of the specified *link_fd* (as |
| 852 |
* previously created using **BPF_LINK_CREATE**) and return a |
| 853 |
* file descriptor that can be used to trigger the iteration. |
| 854 |
* |
| 855 |
* If the resulting file descriptor is pinned to the filesystem |
| 856 |
* using **BPF_OBJ_PIN**, then subsequent **read**\ (2) syscalls |
| 857 |
* for that path will trigger the iterator to read kernel state |
| 858 |
* using the eBPF program attached to *link_fd*. |
| 859 |
* |
| 860 |
* Return |
| 861 |
* A new file descriptor (a nonnegative integer), or -1 if an |
| 862 |
* error occurred (in which case, *errno* is set appropriately). |
| 863 |
* |
| 864 |
* BPF_LINK_DETACH |
| 865 |
* Description |
| 866 |
* Forcefully detach the specified *link_fd* from its |
| 867 |
* corresponding attachment point. |
| 868 |
* |
| 869 |
* Return |
| 870 |
* Returns zero on success. On error, -1 is returned and *errno* |
| 871 |
* is set appropriately. |
| 872 |
* |
| 873 |
* BPF_PROG_BIND_MAP |
| 874 |
* Description |
| 875 |
* Bind a map to the lifetime of an eBPF program. |
| 876 |
* |
| 877 |
* The map identified by *map_fd* is bound to the program |
| 878 |
* identified by *prog_fd* and only released when *prog_fd* is |
| 879 |
* released. This may be used in cases where metadata should be |
| 880 |
* associated with a program which otherwise does not contain any |
| 881 |
* references to the map (for example, embedded in the eBPF |
| 882 |
* program instructions). |
| 883 |
* |
| 884 |
* Return |
| 885 |
* Returns zero on success. On error, -1 is returned and *errno* |
| 886 |
* is set appropriately. |
| 887 |
* |
| 888 |
* BPF_TOKEN_CREATE |
| 889 |
* Description |
| 890 |
* Create BPF token with embedded information about what |
| 891 |
* BPF-related functionality it allows: |
| 892 |
* - a set of allowed bpf() syscall commands; |
| 893 |
* - a set of allowed BPF map types to be created with |
| 894 |
* BPF_MAP_CREATE command, if BPF_MAP_CREATE itself is allowed; |
| 895 |
* - a set of allowed BPF program types and BPF program attach |
| 896 |
* types to be loaded with BPF_PROG_LOAD command, if |
| 897 |
* BPF_PROG_LOAD itself is allowed. |
| 898 |
* |
| 899 |
* BPF token is created (derived) from an instance of BPF FS, |
| 900 |
* assuming it has necessary delegation mount options specified. |
| 901 |
* This BPF token can be passed as an extra parameter to various |
| 902 |
* bpf() syscall commands to grant BPF subsystem functionality to |
| 903 |
* unprivileged processes. |
| 904 |
* |
| 905 |
* When created, BPF token is "associated" with the owning |
| 906 |
* user namespace of BPF FS instance (super block) that it was |
| 907 |
* derived from, and subsequent BPF operations performed with |
| 908 |
* BPF token would be performing capabilities checks (i.e., |
| 909 |
* CAP_BPF, CAP_PERFMON, CAP_NET_ADMIN, CAP_SYS_ADMIN) within |
| 910 |
* that user namespace. Without BPF token, such capabilities |
| 911 |
* have to be granted in init user namespace, making bpf() |
| 912 |
* syscall incompatible with user namespace, for the most part. |
| 913 |
* |
| 914 |
* Return |
| 915 |
* A new file descriptor (a nonnegative integer), or -1 if an |
| 916 |
* error occurred (in which case, *errno* is set appropriately). |
| 917 |
* |
| 918 |
* BPF_PROG_STREAM_READ_BY_FD |
| 919 |
* Description |
| 920 |
* Read data of a program's BPF stream. The program is identified |
| 921 |
* by *prog_fd*, and the stream is identified by the *stream_id*. |
| 922 |
* The data is copied to a buffer pointed to by *stream_buf*, and |
| 923 |
* filled less than or equal to *stream_buf_len* bytes. |
| 924 |
* |
| 925 |
* Return |
| 926 |
* Number of bytes read from the stream on success, or -1 if an |
| 927 |
* error occurred (in which case, *errno* is set appropriately). |
| 928 |
* |
| 929 |
* BPF_PROG_ASSOC_STRUCT_OPS |
| 930 |
* Description |
| 931 |
* Associate a BPF program with a struct_ops map. The struct_ops |
| 932 |
* map is identified by *map_fd* and the BPF program is |
| 933 |
* identified by *prog_fd*. |
| 934 |
* |
| 935 |
* Return |
| 936 |
* 0 on success or -1 if an error occurred (in which case, |
| 937 |
* *errno* is set appropriately). |
| 938 |
* |
| 939 |
* NOTES |
| 940 |
* eBPF objects (maps and programs) can be shared between processes. |
| 941 |
* |
| 942 |
* * After **fork**\ (2), the child inherits file descriptors |
| 943 |
* referring to the same eBPF objects. |
| 944 |
* * File descriptors referring to eBPF objects can be transferred over |
| 945 |
* **unix**\ (7) domain sockets. |
| 946 |
* * File descriptors referring to eBPF objects can be duplicated in the |
| 947 |
* usual way, using **dup**\ (2) and similar calls. |
| 948 |
* * File descriptors referring to eBPF objects can be pinned to the |
| 949 |
* filesystem using the **BPF_OBJ_PIN** command of **bpf**\ (2). |
| 950 |
* |
| 951 |
* An eBPF object is deallocated only after all file descriptors referring |
| 952 |
* to the object have been closed and no references remain pinned to the |
| 953 |
* filesystem or attached (for example, bound to a program or device). |
| 954 |
*/ |
| 955 |
enum bpf_cmd { |
| 956 |
BPF_MAP_CREATE, |
| 957 |
BPF_MAP_LOOKUP_ELEM, |
| 958 |
BPF_MAP_UPDATE_ELEM, |
| 959 |
BPF_MAP_DELETE_ELEM, |
| 960 |
BPF_MAP_GET_NEXT_KEY, |
| 961 |
BPF_PROG_LOAD, |
| 962 |
BPF_OBJ_PIN, |
| 963 |
BPF_OBJ_GET, |
| 964 |
BPF_PROG_ATTACH, |
| 965 |
BPF_PROG_DETACH, |
| 966 |
BPF_PROG_TEST_RUN, |
| 967 |
BPF_PROG_RUN = BPF_PROG_TEST_RUN, |
| 968 |
BPF_PROG_GET_NEXT_ID, |
| 969 |
BPF_MAP_GET_NEXT_ID, |
| 970 |
BPF_PROG_GET_FD_BY_ID, |
| 971 |
BPF_MAP_GET_FD_BY_ID, |
| 972 |
BPF_OBJ_GET_INFO_BY_FD, |
| 973 |
BPF_PROG_QUERY, |
| 974 |
BPF_RAW_TRACEPOINT_OPEN, |
| 975 |
BPF_BTF_LOAD, |
| 976 |
BPF_BTF_GET_FD_BY_ID, |
| 977 |
BPF_TASK_FD_QUERY, |
| 978 |
BPF_MAP_LOOKUP_AND_DELETE_ELEM, |
| 979 |
BPF_MAP_FREEZE, |
| 980 |
BPF_BTF_GET_NEXT_ID, |
| 981 |
BPF_MAP_LOOKUP_BATCH, |
| 982 |
BPF_MAP_LOOKUP_AND_DELETE_BATCH, |
| 983 |
BPF_MAP_UPDATE_BATCH, |
| 984 |
BPF_MAP_DELETE_BATCH, |
| 985 |
BPF_LINK_CREATE, |
| 986 |
BPF_LINK_UPDATE, |
| 987 |
BPF_LINK_GET_FD_BY_ID, |
| 988 |
BPF_LINK_GET_NEXT_ID, |
| 989 |
BPF_ENABLE_STATS, |
| 990 |
BPF_ITER_CREATE, |
| 991 |
BPF_LINK_DETACH, |
| 992 |
BPF_PROG_BIND_MAP, |
| 993 |
BPF_TOKEN_CREATE, |
| 994 |
BPF_PROG_STREAM_READ_BY_FD, |
| 995 |
BPF_PROG_ASSOC_STRUCT_OPS, |
| 996 |
__MAX_BPF_CMD, |
| 997 |
}; |
| 998 |
|
| 999 |
enum bpf_map_type { |
| 1000 |
BPF_MAP_TYPE_UNSPEC, |
| 1001 |
BPF_MAP_TYPE_HASH, |
| 1002 |
BPF_MAP_TYPE_ARRAY, |
| 1003 |
BPF_MAP_TYPE_PROG_ARRAY, |
| 1004 |
BPF_MAP_TYPE_PERF_EVENT_ARRAY, |
| 1005 |
BPF_MAP_TYPE_PERCPU_HASH, |
| 1006 |
BPF_MAP_TYPE_PERCPU_ARRAY, |
| 1007 |
BPF_MAP_TYPE_STACK_TRACE, |
| 1008 |
BPF_MAP_TYPE_CGROUP_ARRAY, |
| 1009 |
BPF_MAP_TYPE_LRU_HASH, |
| 1010 |
BPF_MAP_TYPE_LRU_PERCPU_HASH, |
| 1011 |
BPF_MAP_TYPE_LPM_TRIE, |
| 1012 |
BPF_MAP_TYPE_ARRAY_OF_MAPS, |
| 1013 |
BPF_MAP_TYPE_HASH_OF_MAPS, |
| 1014 |
BPF_MAP_TYPE_DEVMAP, |
| 1015 |
BPF_MAP_TYPE_SOCKMAP, |
| 1016 |
BPF_MAP_TYPE_CPUMAP, |
| 1017 |
BPF_MAP_TYPE_XSKMAP, |
| 1018 |
BPF_MAP_TYPE_SOCKHASH, |
| 1019 |
BPF_MAP_TYPE_CGROUP_STORAGE_DEPRECATED, |
| 1020 |
/* BPF_MAP_TYPE_CGROUP_STORAGE is available to bpf programs attaching |
| 1021 |
* to a cgroup. The newer BPF_MAP_TYPE_CGRP_STORAGE is available to |
| 1022 |
* both cgroup-attached and other progs and supports all functionality |
| 1023 |
* provided by BPF_MAP_TYPE_CGROUP_STORAGE. So mark |
| 1024 |
* BPF_MAP_TYPE_CGROUP_STORAGE deprecated. |
| 1025 |
*/ |
| 1026 |
BPF_MAP_TYPE_CGROUP_STORAGE = BPF_MAP_TYPE_CGROUP_STORAGE_DEPRECATED, |
| 1027 |
BPF_MAP_TYPE_REUSEPORT_SOCKARRAY, |
| 1028 |
BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE_DEPRECATED, |
| 1029 |
/* BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE is available to bpf programs |
| 1030 |
* attaching to a cgroup. The new mechanism (BPF_MAP_TYPE_CGRP_STORAGE + |
| 1031 |
* local percpu kptr) supports all BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE |
| 1032 |
* functionality and more. So mark * BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE |
| 1033 |
* deprecated. |
| 1034 |
*/ |
| 1035 |
BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE = BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE_DEPRECATED, |
| 1036 |
BPF_MAP_TYPE_QUEUE, |
| 1037 |
BPF_MAP_TYPE_STACK, |
| 1038 |
BPF_MAP_TYPE_SK_STORAGE, |
| 1039 |
BPF_MAP_TYPE_DEVMAP_HASH, |
| 1040 |
BPF_MAP_TYPE_STRUCT_OPS, |
| 1041 |
BPF_MAP_TYPE_RINGBUF, |
| 1042 |
BPF_MAP_TYPE_INODE_STORAGE, |
| 1043 |
BPF_MAP_TYPE_TASK_STORAGE, |
| 1044 |
BPF_MAP_TYPE_BLOOM_FILTER, |
| 1045 |
BPF_MAP_TYPE_USER_RINGBUF, |
| 1046 |
BPF_MAP_TYPE_CGRP_STORAGE, |
| 1047 |
BPF_MAP_TYPE_ARENA, |
| 1048 |
BPF_MAP_TYPE_INSN_ARRAY, |
| 1049 |
__MAX_BPF_MAP_TYPE |
| 1050 |
}; |
| 1051 |
|
| 1052 |
/* Note that tracing related programs such as |
| 1053 |
* BPF_PROG_TYPE_{KPROBE,TRACEPOINT,PERF_EVENT,RAW_TRACEPOINT} |
| 1054 |
* are not subject to a stable API since kernel internal data |
| 1055 |
* structures can change from release to release and may |
| 1056 |
* therefore break existing tracing BPF programs. Tracing BPF |
| 1057 |
* programs correspond to /a/ specific kernel which is to be |
| 1058 |
* analyzed, and not /a/ specific kernel /and/ all future ones. |
| 1059 |
*/ |
| 1060 |
enum bpf_prog_type { |
| 1061 |
BPF_PROG_TYPE_UNSPEC, |
| 1062 |
BPF_PROG_TYPE_SOCKET_FILTER, |
| 1063 |
BPF_PROG_TYPE_KPROBE, |
| 1064 |
BPF_PROG_TYPE_SCHED_CLS, |
| 1065 |
BPF_PROG_TYPE_SCHED_ACT, |
| 1066 |
BPF_PROG_TYPE_TRACEPOINT, |
| 1067 |
BPF_PROG_TYPE_XDP, |
| 1068 |
BPF_PROG_TYPE_PERF_EVENT, |
| 1069 |
BPF_PROG_TYPE_CGROUP_SKB, |
| 1070 |
BPF_PROG_TYPE_CGROUP_SOCK, |
| 1071 |
BPF_PROG_TYPE_LWT_IN, |
| 1072 |
BPF_PROG_TYPE_LWT_OUT, |
| 1073 |
BPF_PROG_TYPE_LWT_XMIT, |
| 1074 |
BPF_PROG_TYPE_SOCK_OPS, |
| 1075 |
BPF_PROG_TYPE_SK_SKB, |
| 1076 |
BPF_PROG_TYPE_CGROUP_DEVICE, |
| 1077 |
BPF_PROG_TYPE_SK_MSG, |
| 1078 |
BPF_PROG_TYPE_RAW_TRACEPOINT, |
| 1079 |
BPF_PROG_TYPE_CGROUP_SOCK_ADDR, |
| 1080 |
BPF_PROG_TYPE_LWT_SEG6LOCAL, |
| 1081 |
BPF_PROG_TYPE_LIRC_MODE2, |
| 1082 |
BPF_PROG_TYPE_SK_REUSEPORT, |
| 1083 |
BPF_PROG_TYPE_FLOW_DISSECTOR, |
| 1084 |
BPF_PROG_TYPE_CGROUP_SYSCTL, |
| 1085 |
BPF_PROG_TYPE_RAW_TRACEPOINT_WRITABLE, |
| 1086 |
BPF_PROG_TYPE_CGROUP_SOCKOPT, |
| 1087 |
BPF_PROG_TYPE_TRACING, |
| 1088 |
BPF_PROG_TYPE_STRUCT_OPS, |
| 1089 |
BPF_PROG_TYPE_EXT, |
| 1090 |
BPF_PROG_TYPE_LSM, |
| 1091 |
BPF_PROG_TYPE_SK_LOOKUP, |
| 1092 |
BPF_PROG_TYPE_SYSCALL, /* a program that can execute syscalls */ |
| 1093 |
BPF_PROG_TYPE_NETFILTER, |
| 1094 |
__MAX_BPF_PROG_TYPE |
| 1095 |
}; |
| 1096 |
|
| 1097 |
enum bpf_attach_type { |
| 1098 |
BPF_CGROUP_INET_INGRESS, |
| 1099 |
BPF_CGROUP_INET_EGRESS, |
| 1100 |
BPF_CGROUP_INET_SOCK_CREATE, |
| 1101 |
BPF_CGROUP_SOCK_OPS, |
| 1102 |
BPF_SK_SKB_STREAM_PARSER, |
| 1103 |
BPF_SK_SKB_STREAM_VERDICT, |
| 1104 |
BPF_CGROUP_DEVICE, |
| 1105 |
BPF_SK_MSG_VERDICT, |
| 1106 |
BPF_CGROUP_INET4_BIND, |
| 1107 |
BPF_CGROUP_INET6_BIND, |
| 1108 |
BPF_CGROUP_INET4_CONNECT, |
| 1109 |
BPF_CGROUP_INET6_CONNECT, |
| 1110 |
BPF_CGROUP_INET4_POST_BIND, |
| 1111 |
BPF_CGROUP_INET6_POST_BIND, |
| 1112 |
BPF_CGROUP_UDP4_SENDMSG, |
| 1113 |
BPF_CGROUP_UDP6_SENDMSG, |
| 1114 |
BPF_LIRC_MODE2, |
| 1115 |
BPF_FLOW_DISSECTOR, |
| 1116 |
BPF_CGROUP_SYSCTL, |
| 1117 |
BPF_CGROUP_UDP4_RECVMSG, |
| 1118 |
BPF_CGROUP_UDP6_RECVMSG, |
| 1119 |
BPF_CGROUP_GETSOCKOPT, |
| 1120 |
BPF_CGROUP_SETSOCKOPT, |
| 1121 |
BPF_TRACE_RAW_TP, |
| 1122 |
BPF_TRACE_FENTRY, |
| 1123 |
BPF_TRACE_FEXIT, |
| 1124 |
BPF_MODIFY_RETURN, |
| 1125 |
BPF_LSM_MAC, |
| 1126 |
BPF_TRACE_ITER, |
| 1127 |
BPF_CGROUP_INET4_GETPEERNAME, |
| 1128 |
BPF_CGROUP_INET6_GETPEERNAME, |
| 1129 |
BPF_CGROUP_INET4_GETSOCKNAME, |
| 1130 |
BPF_CGROUP_INET6_GETSOCKNAME, |
| 1131 |
BPF_XDP_DEVMAP, |
| 1132 |
BPF_CGROUP_INET_SOCK_RELEASE, |
| 1133 |
BPF_XDP_CPUMAP, |
| 1134 |
BPF_SK_LOOKUP, |
| 1135 |
BPF_XDP, |
| 1136 |
BPF_SK_SKB_VERDICT, |
| 1137 |
BPF_SK_REUSEPORT_SELECT, |
| 1138 |
BPF_SK_REUSEPORT_SELECT_OR_MIGRATE, |
| 1139 |
BPF_PERF_EVENT, |
| 1140 |
BPF_TRACE_KPROBE_MULTI, |
| 1141 |
BPF_LSM_CGROUP, |
| 1142 |
BPF_STRUCT_OPS, |
| 1143 |
BPF_NETFILTER, |
| 1144 |
BPF_TCX_INGRESS, |
| 1145 |
BPF_TCX_EGRESS, |
| 1146 |
BPF_TRACE_UPROBE_MULTI, |
| 1147 |
BPF_CGROUP_UNIX_CONNECT, |
| 1148 |
BPF_CGROUP_UNIX_SENDMSG, |
| 1149 |
BPF_CGROUP_UNIX_RECVMSG, |
| 1150 |
BPF_CGROUP_UNIX_GETPEERNAME, |
| 1151 |
BPF_CGROUP_UNIX_GETSOCKNAME, |
| 1152 |
BPF_NETKIT_PRIMARY, |
| 1153 |
BPF_NETKIT_PEER, |
| 1154 |
BPF_TRACE_KPROBE_SESSION, |
| 1155 |
BPF_TRACE_UPROBE_SESSION, |
| 1156 |
BPF_TRACE_FSESSION, |
| 1157 |
__MAX_BPF_ATTACH_TYPE |
| 1158 |
}; |
| 1159 |
|
| 1160 |
#define MAX_BPF_ATTACH_TYPE __MAX_BPF_ATTACH_TYPE |
| 1161 |
|
| 1162 |
/* Add BPF_LINK_TYPE(type, name) in bpf_types.h to keep bpf_link_type_strs[] |
| 1163 |
* in sync with the definitions below. |
| 1164 |
*/ |
| 1165 |
enum bpf_link_type { |
| 1166 |
BPF_LINK_TYPE_UNSPEC = 0, |
| 1167 |
BPF_LINK_TYPE_RAW_TRACEPOINT = 1, |
| 1168 |
BPF_LINK_TYPE_TRACING = 2, |
| 1169 |
BPF_LINK_TYPE_CGROUP = 3, |
| 1170 |
BPF_LINK_TYPE_ITER = 4, |
| 1171 |
BPF_LINK_TYPE_NETNS = 5, |
| 1172 |
BPF_LINK_TYPE_XDP = 6, |
| 1173 |
BPF_LINK_TYPE_PERF_EVENT = 7, |
| 1174 |
BPF_LINK_TYPE_KPROBE_MULTI = 8, |
| 1175 |
BPF_LINK_TYPE_STRUCT_OPS = 9, |
| 1176 |
BPF_LINK_TYPE_NETFILTER = 10, |
| 1177 |
BPF_LINK_TYPE_TCX = 11, |
| 1178 |
BPF_LINK_TYPE_UPROBE_MULTI = 12, |
| 1179 |
BPF_LINK_TYPE_NETKIT = 13, |
| 1180 |
BPF_LINK_TYPE_SOCKMAP = 14, |
| 1181 |
__MAX_BPF_LINK_TYPE, |
| 1182 |
}; |
| 1183 |
|
| 1184 |
#define MAX_BPF_LINK_TYPE __MAX_BPF_LINK_TYPE |
| 1185 |
|
| 1186 |
enum bpf_perf_event_type { |
| 1187 |
BPF_PERF_EVENT_UNSPEC = 0, |
| 1188 |
BPF_PERF_EVENT_UPROBE = 1, |
| 1189 |
BPF_PERF_EVENT_URETPROBE = 2, |
| 1190 |
BPF_PERF_EVENT_KPROBE = 3, |
| 1191 |
BPF_PERF_EVENT_KRETPROBE = 4, |
| 1192 |
BPF_PERF_EVENT_TRACEPOINT = 5, |
| 1193 |
BPF_PERF_EVENT_EVENT = 6, |
| 1194 |
}; |
| 1195 |
|
| 1196 |
/* cgroup-bpf attach flags used in BPF_PROG_ATTACH command |
| 1197 |
* |
| 1198 |
* NONE(default): No further bpf programs allowed in the subtree. |
| 1199 |
* |
| 1200 |
* BPF_F_ALLOW_OVERRIDE: If a sub-cgroup installs some bpf program, |
| 1201 |
* the program in this cgroup yields to sub-cgroup program. |
| 1202 |
* |
| 1203 |
* BPF_F_ALLOW_MULTI: If a sub-cgroup installs some bpf program, |
| 1204 |
* that cgroup program gets run in addition to the program in this cgroup. |
| 1205 |
* |
| 1206 |
* Only one program is allowed to be attached to a cgroup with |
| 1207 |
* NONE or BPF_F_ALLOW_OVERRIDE flag. |
| 1208 |
* Attaching another program on top of NONE or BPF_F_ALLOW_OVERRIDE will |
| 1209 |
* release old program and attach the new one. Attach flags has to match. |
| 1210 |
* |
| 1211 |
* Multiple programs are allowed to be attached to a cgroup with |
| 1212 |
* BPF_F_ALLOW_MULTI flag. They are executed in FIFO order |
| 1213 |
* (those that were attached first, run first) |
| 1214 |
* The programs of sub-cgroup are executed first, then programs of |
| 1215 |
* this cgroup and then programs of parent cgroup. |
| 1216 |
* When children program makes decision (like picking TCP CA or sock bind) |
| 1217 |
* parent program has a chance to override it. |
| 1218 |
* |
| 1219 |
* With BPF_F_ALLOW_MULTI a new program is added to the end of the list of |
| 1220 |
* programs for a cgroup. Though it's possible to replace an old program at |
| 1221 |
* any position by also specifying BPF_F_REPLACE flag and position itself in |
| 1222 |
* replace_bpf_fd attribute. Old program at this position will be released. |
| 1223 |
* |
| 1224 |
* A cgroup with MULTI or OVERRIDE flag allows any attach flags in sub-cgroups. |
| 1225 |
* A cgroup with NONE doesn't allow any programs in sub-cgroups. |
| 1226 |
* Ex1: |
| 1227 |
* cgrp1 (MULTI progs A, B) -> |
| 1228 |
* cgrp2 (OVERRIDE prog C) -> |
| 1229 |
* cgrp3 (MULTI prog D) -> |
| 1230 |
* cgrp4 (OVERRIDE prog E) -> |
| 1231 |
* cgrp5 (NONE prog F) |
| 1232 |
* the event in cgrp5 triggers execution of F,D,A,B in that order. |
| 1233 |
* if prog F is detached, the execution is E,D,A,B |
| 1234 |
* if prog F and D are detached, the execution is E,A,B |
| 1235 |
* if prog F, E and D are detached, the execution is C,A,B |
| 1236 |
* |
| 1237 |
* All eligible programs are executed regardless of return code from |
| 1238 |
* earlier programs. |
| 1239 |
*/ |
| 1240 |
#define BPF_F_ALLOW_OVERRIDE (1U << 0) |
| 1241 |
#define BPF_F_ALLOW_MULTI (1U << 1) |
| 1242 |
/* Generic attachment flags. */ |
| 1243 |
#define BPF_F_REPLACE (1U << 2) |
| 1244 |
#define BPF_F_BEFORE (1U << 3) |
| 1245 |
#define BPF_F_AFTER (1U << 4) |
| 1246 |
#define BPF_F_ID (1U << 5) |
| 1247 |
#define BPF_F_PREORDER (1U << 6) |
| 1248 |
#define BPF_F_LINK BPF_F_LINK /* 1 << 13 */ |
| 1249 |
|
| 1250 |
/* If BPF_F_STRICT_ALIGNMENT is used in BPF_PROG_LOAD command, the |
| 1251 |
* verifier will perform strict alignment checking as if the kernel |
| 1252 |
* has been built with CONFIG_EFFICIENT_UNALIGNED_ACCESS not set, |
| 1253 |
* and NET_IP_ALIGN defined to 2. |
| 1254 |
*/ |
| 1255 |
#define BPF_F_STRICT_ALIGNMENT (1U << 0) |
| 1256 |
|
| 1257 |
/* If BPF_F_ANY_ALIGNMENT is used in BPF_PROG_LOAD command, the |
| 1258 |
* verifier will allow any alignment whatsoever. On platforms |
| 1259 |
* with strict alignment requirements for loads ands stores (such |
| 1260 |
* as sparc and mips) the verifier validates that all loads and |
| 1261 |
* stores provably follow this requirement. This flag turns that |
| 1262 |
* checking and enforcement off. |
| 1263 |
* |
| 1264 |
* It is mostly used for testing when we want to validate the |
| 1265 |
* context and memory access aspects of the verifier, but because |
| 1266 |
* of an unaligned access the alignment check would trigger before |
| 1267 |
* the one we are interested in. |
| 1268 |
*/ |
| 1269 |
#define BPF_F_ANY_ALIGNMENT (1U << 1) |
| 1270 |
|
| 1271 |
/* BPF_F_TEST_RND_HI32 is used in BPF_PROG_LOAD command for testing purpose. |
| 1272 |
* Verifier does sub-register def/use analysis and identifies instructions whose |
| 1273 |
* def only matters for low 32-bit, high 32-bit is never referenced later |
| 1274 |
* through implicit zero extension. Therefore verifier notifies JIT back-ends |
| 1275 |
* that it is safe to ignore clearing high 32-bit for these instructions. This |
| 1276 |
* saves some back-ends a lot of code-gen. However such optimization is not |
| 1277 |
* necessary on some arches, for example x86_64, arm64 etc, whose JIT back-ends |
| 1278 |
* hence hasn't used verifier's analysis result. But, we really want to have a |
| 1279 |
* way to be able to verify the correctness of the described optimization on |
| 1280 |
* x86_64 on which testsuites are frequently exercised. |
| 1281 |
* |
| 1282 |
* So, this flag is introduced. Once it is set, verifier will randomize high |
| 1283 |
* 32-bit for those instructions who has been identified as safe to ignore them. |
| 1284 |
* Then, if verifier is not doing correct analysis, such randomization will |
| 1285 |
* regress tests to expose bugs. |
| 1286 |
*/ |
| 1287 |
#define BPF_F_TEST_RND_HI32 (1U << 2) |
| 1288 |
|
| 1289 |
/* The verifier internal test flag. Behavior is undefined */ |
| 1290 |
#define BPF_F_TEST_STATE_FREQ (1U << 3) |
| 1291 |
|
| 1292 |
/* If BPF_F_SLEEPABLE is used in BPF_PROG_LOAD command, the verifier will |
| 1293 |
* restrict map and helper usage for such programs. Sleepable BPF programs can |
| 1294 |
* only be attached to hooks where kernel execution context allows sleeping. |
| 1295 |
* Such programs are allowed to use helpers that may sleep like |
| 1296 |
* bpf_copy_from_user(). |
| 1297 |
*/ |
| 1298 |
#define BPF_F_SLEEPABLE (1U << 4) |
| 1299 |
|
| 1300 |
/* If BPF_F_XDP_HAS_FRAGS is used in BPF_PROG_LOAD command, the loaded program |
| 1301 |
* fully support xdp frags. |
| 1302 |
*/ |
| 1303 |
#define BPF_F_XDP_HAS_FRAGS (1U << 5) |
| 1304 |
|
| 1305 |
/* If BPF_F_XDP_DEV_BOUND_ONLY is used in BPF_PROG_LOAD command, the loaded |
| 1306 |
* program becomes device-bound but can access XDP metadata. |
| 1307 |
*/ |
| 1308 |
#define BPF_F_XDP_DEV_BOUND_ONLY (1U << 6) |
| 1309 |
|
| 1310 |
/* The verifier internal test flag. Behavior is undefined */ |
| 1311 |
#define BPF_F_TEST_REG_INVARIANTS (1U << 7) |
| 1312 |
|
| 1313 |
/* link_create.kprobe_multi.flags used in LINK_CREATE command for |
| 1314 |
* BPF_TRACE_KPROBE_MULTI attach type to create return probe. |
| 1315 |
*/ |
| 1316 |
enum { |
| 1317 |
BPF_F_KPROBE_MULTI_RETURN = (1U << 0) |
| 1318 |
}; |
| 1319 |
|
| 1320 |
/* link_create.uprobe_multi.flags used in LINK_CREATE command for |
| 1321 |
* BPF_TRACE_UPROBE_MULTI attach type to create return probe. |
| 1322 |
*/ |
| 1323 |
enum { |
| 1324 |
BPF_F_UPROBE_MULTI_RETURN = (1U << 0) |
| 1325 |
}; |
| 1326 |
|
| 1327 |
/* link_create.netfilter.flags used in LINK_CREATE command for |
| 1328 |
* BPF_PROG_TYPE_NETFILTER to enable IP packet defragmentation. |
| 1329 |
*/ |
| 1330 |
#define BPF_F_NETFILTER_IP_DEFRAG (1U << 0) |
| 1331 |
|
| 1332 |
/* When BPF ldimm64's insn[0].src_reg != 0 then this can have |
| 1333 |
* the following extensions: |
| 1334 |
* |
| 1335 |
* insn[0].src_reg: BPF_PSEUDO_MAP_[FD|IDX] |
| 1336 |
* insn[0].imm: map fd or fd_idx |
| 1337 |
* insn[1].imm: 0 |
| 1338 |
* insn[0].off: 0 |
| 1339 |
* insn[1].off: 0 |
| 1340 |
* ldimm64 rewrite: address of map |
| 1341 |
* verifier type: CONST_PTR_TO_MAP |
| 1342 |
*/ |
| 1343 |
#define BPF_PSEUDO_MAP_FD 1 |
| 1344 |
#define BPF_PSEUDO_MAP_IDX 5 |
| 1345 |
|
| 1346 |
/* insn[0].src_reg: BPF_PSEUDO_MAP_[IDX_]VALUE |
| 1347 |
* insn[0].imm: map fd or fd_idx |
| 1348 |
* insn[1].imm: offset into value |
| 1349 |
* insn[0].off: 0 |
| 1350 |
* insn[1].off: 0 |
| 1351 |
* ldimm64 rewrite: address of map[0]+offset |
| 1352 |
* verifier type: PTR_TO_MAP_VALUE |
| 1353 |
*/ |
| 1354 |
#define BPF_PSEUDO_MAP_VALUE 2 |
| 1355 |
#define BPF_PSEUDO_MAP_IDX_VALUE 6 |
| 1356 |
|
| 1357 |
/* insn[0].src_reg: BPF_PSEUDO_BTF_ID |
| 1358 |
* insn[0].imm: kernel btd id of VAR |
| 1359 |
* insn[1].imm: 0 |
| 1360 |
* insn[0].off: 0 |
| 1361 |
* insn[1].off: 0 |
| 1362 |
* ldimm64 rewrite: address of the kernel variable |
| 1363 |
* verifier type: PTR_TO_BTF_ID or PTR_TO_MEM, depending on whether the var |
| 1364 |
* is struct/union. |
| 1365 |
*/ |
| 1366 |
#define BPF_PSEUDO_BTF_ID 3 |
| 1367 |
/* insn[0].src_reg: BPF_PSEUDO_FUNC |
| 1368 |
* insn[0].imm: insn offset to the func |
| 1369 |
* insn[1].imm: 0 |
| 1370 |
* insn[0].off: 0 |
| 1371 |
* insn[1].off: 0 |
| 1372 |
* ldimm64 rewrite: address of the function |
| 1373 |
* verifier type: PTR_TO_FUNC. |
| 1374 |
*/ |
| 1375 |
#define BPF_PSEUDO_FUNC 4 |
| 1376 |
|
| 1377 |
/* when bpf_call->src_reg == BPF_PSEUDO_CALL, bpf_call->imm == pc-relative |
| 1378 |
* offset to another bpf function |
| 1379 |
*/ |
| 1380 |
#define BPF_PSEUDO_CALL 1 |
| 1381 |
/* when bpf_call->src_reg == BPF_PSEUDO_KFUNC_CALL, |
| 1382 |
* bpf_call->imm == btf_id of a BTF_KIND_FUNC in the running kernel |
| 1383 |
*/ |
| 1384 |
#define BPF_PSEUDO_KFUNC_CALL 2 |
| 1385 |
|
| 1386 |
enum bpf_addr_space_cast { |
| 1387 |
BPF_ADDR_SPACE_CAST = 1, |
| 1388 |
}; |
| 1389 |
|
| 1390 |
/* flags for BPF_MAP_UPDATE_ELEM command */ |
| 1391 |
enum { |
| 1392 |
BPF_ANY = 0, /* create new element or update existing */ |
| 1393 |
BPF_NOEXIST = 1, /* create new element if it didn't exist */ |
| 1394 |
BPF_EXIST = 2, /* update existing element */ |
| 1395 |
BPF_F_LOCK = 4, /* spin_lock-ed map_lookup/map_update */ |
| 1396 |
BPF_F_CPU = 8, /* cpu flag for percpu maps, upper 32-bit of flags is a cpu number */ |
| 1397 |
BPF_F_ALL_CPUS = 16, /* update value across all CPUs for percpu maps */ |
| 1398 |
}; |
| 1399 |
|
| 1400 |
/* flags for BPF_MAP_CREATE command */ |
| 1401 |
enum { |
| 1402 |
BPF_F_NO_PREALLOC = (1U << 0), |
| 1403 |
/* Instead of having one common LRU list in the |
| 1404 |
* BPF_MAP_TYPE_LRU_[PERCPU_]HASH map, use a percpu LRU list |
| 1405 |
* which can scale and perform better. |
| 1406 |
* Note, the LRU nodes (including free nodes) cannot be moved |
| 1407 |
* across different LRU lists. |
| 1408 |
*/ |
| 1409 |
BPF_F_NO_COMMON_LRU = (1U << 1), |
| 1410 |
/* Specify numa node during map creation */ |
| 1411 |
BPF_F_NUMA_NODE = (1U << 2), |
| 1412 |
|
| 1413 |
/* Flags for accessing BPF object from syscall side. */ |
| 1414 |
BPF_F_RDONLY = (1U << 3), |
| 1415 |
BPF_F_WRONLY = (1U << 4), |
| 1416 |
|
| 1417 |
/* Flag for stack_map, store build_id+offset instead of pointer */ |
| 1418 |
BPF_F_STACK_BUILD_ID = (1U << 5), |
| 1419 |
|
| 1420 |
/* Zero-initialize hash function seed. This should only be used for testing. */ |
| 1421 |
BPF_F_ZERO_SEED = (1U << 6), |
| 1422 |
|
| 1423 |
/* Flags for accessing BPF object from program side. */ |
| 1424 |
BPF_F_RDONLY_PROG = (1U << 7), |
| 1425 |
BPF_F_WRONLY_PROG = (1U << 8), |
| 1426 |
|
| 1427 |
/* Clone map from listener for newly accepted socket */ |
| 1428 |
BPF_F_CLONE = (1U << 9), |
| 1429 |
|
| 1430 |
/* Enable memory-mapping BPF map */ |
| 1431 |
BPF_F_MMAPABLE = (1U << 10), |
| 1432 |
|
| 1433 |
/* Share perf_event among processes */ |
| 1434 |
BPF_F_PRESERVE_ELEMS = (1U << 11), |
| 1435 |
|
| 1436 |
/* Create a map that is suitable to be an inner map with dynamic max entries */ |
| 1437 |
BPF_F_INNER_MAP = (1U << 12), |
| 1438 |
|
| 1439 |
/* Create a map that will be registered/unregesitered by the backed bpf_link */ |
| 1440 |
BPF_F_LINK = (1U << 13), |
| 1441 |
|
| 1442 |
/* Get path from provided FD in BPF_OBJ_PIN/BPF_OBJ_GET commands */ |
| 1443 |
BPF_F_PATH_FD = (1U << 14), |
| 1444 |
|
| 1445 |
/* Flag for value_type_btf_obj_fd, the fd is available */ |
| 1446 |
BPF_F_VTYPE_BTF_OBJ_FD = (1U << 15), |
| 1447 |
|
| 1448 |
/* BPF token FD is passed in a corresponding command's token_fd field */ |
| 1449 |
BPF_F_TOKEN_FD = (1U << 16), |
| 1450 |
|
| 1451 |
/* When user space page faults in bpf_arena send SIGSEGV instead of inserting new page */ |
| 1452 |
BPF_F_SEGV_ON_FAULT = (1U << 17), |
| 1453 |
|
| 1454 |
/* Do not translate kernel bpf_arena pointers to user pointers */ |
| 1455 |
BPF_F_NO_USER_CONV = (1U << 18), |
| 1456 |
|
| 1457 |
/* Enable BPF ringbuf overwrite mode */ |
| 1458 |
BPF_F_RB_OVERWRITE = (1U << 19), |
| 1459 |
}; |
| 1460 |
|
| 1461 |
/* Flags for BPF_PROG_QUERY. */ |
| 1462 |
|
| 1463 |
/* Query effective (directly attached + inherited from ancestor cgroups) |
| 1464 |
* programs that will be executed for events within a cgroup. |
| 1465 |
* attach_flags with this flag are always returned 0. |
| 1466 |
*/ |
| 1467 |
#define BPF_F_QUERY_EFFECTIVE (1U << 0) |
| 1468 |
|
| 1469 |
/* Flags for BPF_PROG_TEST_RUN */ |
| 1470 |
|
| 1471 |
/* If set, run the test on the cpu specified by bpf_attr.test.cpu */ |
| 1472 |
#define BPF_F_TEST_RUN_ON_CPU (1U << 0) |
| 1473 |
/* If set, XDP frames will be transmitted after processing */ |
| 1474 |
#define BPF_F_TEST_XDP_LIVE_FRAMES (1U << 1) |
| 1475 |
/* If set, apply CHECKSUM_COMPLETE to skb and validate the checksum */ |
| 1476 |
#define BPF_F_TEST_SKB_CHECKSUM_COMPLETE (1U << 2) |
| 1477 |
|
| 1478 |
/* type for BPF_ENABLE_STATS */ |
| 1479 |
enum bpf_stats_type { |
| 1480 |
/* enabled run_time_ns and run_cnt */ |
| 1481 |
BPF_STATS_RUN_TIME = 0, |
| 1482 |
}; |
| 1483 |
|
| 1484 |
enum bpf_stack_build_id_status { |
| 1485 |
/* user space need an empty entry to identify end of a trace */ |
| 1486 |
BPF_STACK_BUILD_ID_EMPTY = 0, |
| 1487 |
/* with valid build_id and offset */ |
| 1488 |
BPF_STACK_BUILD_ID_VALID = 1, |
| 1489 |
/* couldn't get build_id, fallback to ip */ |
| 1490 |
BPF_STACK_BUILD_ID_IP = 2, |
| 1491 |
}; |
| 1492 |
|
| 1493 |
#define BPF_BUILD_ID_SIZE 20 |
| 1494 |
struct bpf_stack_build_id { |
| 1495 |
__s32 status; |
| 1496 |
unsigned char build_id[BPF_BUILD_ID_SIZE]; |
| 1497 |
union { |
| 1498 |
__u64 offset; |
| 1499 |
__u64 ip; |
| 1500 |
}; |
| 1501 |
}; |
| 1502 |
|
| 1503 |
#define BPF_OBJ_NAME_LEN 16U |
| 1504 |
|
| 1505 |
enum { |
| 1506 |
BPF_STREAM_STDOUT = 1, |
| 1507 |
BPF_STREAM_STDERR = 2, |
| 1508 |
}; |
| 1509 |
|
| 1510 |
union bpf_attr { |
| 1511 |
struct { /* anonymous struct used by BPF_MAP_CREATE command */ |
| 1512 |
__u32 map_type; /* one of enum bpf_map_type */ |
| 1513 |
__u32 key_size; /* size of key in bytes */ |
| 1514 |
__u32 value_size; /* size of value in bytes */ |
| 1515 |
__u32 max_entries; /* max number of entries in a map */ |
| 1516 |
__u32 map_flags; /* BPF_MAP_CREATE related |
| 1517 |
* flags defined above. |
| 1518 |
*/ |
| 1519 |
__u32 inner_map_fd; /* fd pointing to the inner map */ |
| 1520 |
__u32 numa_node; /* numa node (effective only if |
| 1521 |
* BPF_F_NUMA_NODE is set). |
| 1522 |
*/ |
| 1523 |
char map_name[BPF_OBJ_NAME_LEN]; |
| 1524 |
__u32 map_ifindex; /* ifindex of netdev to create on */ |
| 1525 |
__u32 btf_fd; /* fd pointing to a BTF type data */ |
| 1526 |
__u32 btf_key_type_id; /* BTF type_id of the key */ |
| 1527 |
__u32 btf_value_type_id; /* BTF type_id of the value */ |
| 1528 |
__u32 btf_vmlinux_value_type_id;/* BTF type_id of a kernel- |
| 1529 |
* struct stored as the |
| 1530 |
* map value |
| 1531 |
*/ |
| 1532 |
/* Any per-map-type extra fields |
| 1533 |
* |
| 1534 |
* BPF_MAP_TYPE_BLOOM_FILTER - the lowest 4 bits indicate the |
| 1535 |
* number of hash functions (if 0, the bloom filter will default |
| 1536 |
* to using 5 hash functions). |
| 1537 |
* |
| 1538 |
* BPF_MAP_TYPE_ARENA - contains the address where user space |
| 1539 |
* is going to mmap() the arena. It has to be page aligned. |
| 1540 |
*/ |
| 1541 |
__u64 map_extra; |
| 1542 |
|
| 1543 |
__s32 value_type_btf_obj_fd; /* fd pointing to a BTF |
| 1544 |
* type data for |
| 1545 |
* btf_vmlinux_value_type_id. |
| 1546 |
*/ |
| 1547 |
/* BPF token FD to use with BPF_MAP_CREATE operation. |
| 1548 |
* If provided, map_flags should have BPF_F_TOKEN_FD flag set. |
| 1549 |
*/ |
| 1550 |
__s32 map_token_fd; |
| 1551 |
|
| 1552 |
/* Hash of the program that has exclusive access to the map. |
| 1553 |
*/ |
| 1554 |
__aligned_u64 excl_prog_hash; |
| 1555 |
/* Size of the passed excl_prog_hash. */ |
| 1556 |
__u32 excl_prog_hash_size; |
| 1557 |
}; |
| 1558 |
|
| 1559 |
struct { /* anonymous struct used by BPF_MAP_*_ELEM and BPF_MAP_FREEZE commands */ |
| 1560 |
__u32 map_fd; |
| 1561 |
__aligned_u64 key; |
| 1562 |
union { |
| 1563 |
__aligned_u64 value; |
| 1564 |
__aligned_u64 next_key; |
| 1565 |
}; |
| 1566 |
__u64 flags; |
| 1567 |
}; |
| 1568 |
|
| 1569 |
struct { /* struct used by BPF_MAP_*_BATCH commands */ |
| 1570 |
__aligned_u64 in_batch; /* start batch, |
| 1571 |
* NULL to start from beginning |
| 1572 |
*/ |
| 1573 |
__aligned_u64 out_batch; /* output: next start batch */ |
| 1574 |
__aligned_u64 keys; |
| 1575 |
__aligned_u64 values; |
| 1576 |
__u32 count; /* input/output: |
| 1577 |
* input: # of key/value |
| 1578 |
* elements |
| 1579 |
* output: # of filled elements |
| 1580 |
*/ |
| 1581 |
__u32 map_fd; |
| 1582 |
__u64 elem_flags; |
| 1583 |
__u64 flags; |
| 1584 |
} batch; |
| 1585 |
|
| 1586 |
struct { /* anonymous struct used by BPF_PROG_LOAD command */ |
| 1587 |
__u32 prog_type; /* one of enum bpf_prog_type */ |
| 1588 |
__u32 insn_cnt; |
| 1589 |
__aligned_u64 insns; |
| 1590 |
__aligned_u64 license; |
| 1591 |
__u32 log_level; /* verbosity level of verifier */ |
| 1592 |
__u32 log_size; /* size of user buffer */ |
| 1593 |
__aligned_u64 log_buf; /* user supplied buffer */ |
| 1594 |
__u32 kern_version; /* not used */ |
| 1595 |
__u32 prog_flags; |
| 1596 |
char prog_name[BPF_OBJ_NAME_LEN]; |
| 1597 |
__u32 prog_ifindex; /* ifindex of netdev to prep for */ |
| 1598 |
/* For some prog types expected attach type must be known at |
| 1599 |
* load time to verify attach type specific parts of prog |
| 1600 |
* (context accesses, allowed helpers, etc). |
| 1601 |
*/ |
| 1602 |
__u32 expected_attach_type; |
| 1603 |
__u32 prog_btf_fd; /* fd pointing to BTF type data */ |
| 1604 |
__u32 func_info_rec_size; /* userspace bpf_func_info size */ |
| 1605 |
__aligned_u64 func_info; /* func info */ |
| 1606 |
__u32 func_info_cnt; /* number of bpf_func_info records */ |
| 1607 |
__u32 line_info_rec_size; /* userspace bpf_line_info size */ |
| 1608 |
__aligned_u64 line_info; /* line info */ |
| 1609 |
__u32 line_info_cnt; /* number of bpf_line_info records */ |
| 1610 |
__u32 attach_btf_id; /* in-kernel BTF type id to attach to */ |
| 1611 |
union { |
| 1612 |
/* valid prog_fd to attach to bpf prog */ |
| 1613 |
__u32 attach_prog_fd; |
| 1614 |
/* or valid module BTF object fd or 0 to attach to vmlinux */ |
| 1615 |
__u32 attach_btf_obj_fd; |
| 1616 |
}; |
| 1617 |
__u32 core_relo_cnt; /* number of bpf_core_relo */ |
| 1618 |
__aligned_u64 fd_array; /* array of FDs */ |
| 1619 |
__aligned_u64 core_relos; |
| 1620 |
__u32 core_relo_rec_size; /* sizeof(struct bpf_core_relo) */ |
| 1621 |
/* output: actual total log contents size (including termintaing zero). |
| 1622 |
* It could be both larger than original log_size (if log was |
| 1623 |
* truncated), or smaller (if log buffer wasn't filled completely). |
| 1624 |
*/ |
| 1625 |
__u32 log_true_size; |
| 1626 |
/* BPF token FD to use with BPF_PROG_LOAD operation. |
| 1627 |
* If provided, prog_flags should have BPF_F_TOKEN_FD flag set. |
| 1628 |
*/ |
| 1629 |
__s32 prog_token_fd; |
| 1630 |
/* The fd_array_cnt can be used to pass the length of the |
| 1631 |
* fd_array array. In this case all the [map] file descriptors |
| 1632 |
* passed in this array will be bound to the program, even if |
| 1633 |
* the maps are not referenced directly. The functionality is |
| 1634 |
* similar to the BPF_PROG_BIND_MAP syscall, but maps can be |
| 1635 |
* used by the verifier during the program load. If provided, |
| 1636 |
* then the fd_array[0,...,fd_array_cnt-1] is expected to be |
| 1637 |
* continuous. |
| 1638 |
*/ |
| 1639 |
__u32 fd_array_cnt; |
| 1640 |
/* Pointer to a buffer containing the signature of the BPF |
| 1641 |
* program. |
| 1642 |
*/ |
| 1643 |
__aligned_u64 signature; |
| 1644 |
/* Size of the signature buffer in bytes. */ |
| 1645 |
__u32 signature_size; |
| 1646 |
/* ID of the kernel keyring to be used for signature |
| 1647 |
* verification. |
| 1648 |
*/ |
| 1649 |
__s32 keyring_id; |
| 1650 |
}; |
| 1651 |
|
| 1652 |
struct { /* anonymous struct used by BPF_OBJ_* commands */ |
| 1653 |
__aligned_u64 pathname; |
| 1654 |
__u32 bpf_fd; |
| 1655 |
__u32 file_flags; |
| 1656 |
/* Same as dirfd in openat() syscall; see openat(2) |
| 1657 |
* manpage for details of path FD and pathname semantics; |
| 1658 |
* path_fd should accompanied by BPF_F_PATH_FD flag set in |
| 1659 |
* file_flags field, otherwise it should be set to zero; |
| 1660 |
* if BPF_F_PATH_FD flag is not set, AT_FDCWD is assumed. |
| 1661 |
*/ |
| 1662 |
__s32 path_fd; |
| 1663 |
}; |
| 1664 |
|
| 1665 |
struct { /* anonymous struct used by BPF_PROG_ATTACH/DETACH commands */ |
| 1666 |
union { |
| 1667 |
__u32 target_fd; /* target object to attach to or ... */ |
| 1668 |
__u32 target_ifindex; /* target ifindex */ |
| 1669 |
}; |
| 1670 |
__u32 attach_bpf_fd; |
| 1671 |
__u32 attach_type; |
| 1672 |
__u32 attach_flags; |
| 1673 |
__u32 replace_bpf_fd; |
| 1674 |
union { |
| 1675 |
__u32 relative_fd; |
| 1676 |
__u32 relative_id; |
| 1677 |
}; |
| 1678 |
__u64 expected_revision; |
| 1679 |
}; |
| 1680 |
|
| 1681 |
struct { /* anonymous struct used by BPF_PROG_TEST_RUN command */ |
| 1682 |
__u32 prog_fd; |
| 1683 |
__u32 retval; |
| 1684 |
__u32 data_size_in; /* input: len of data_in */ |
| 1685 |
__u32 data_size_out; /* input/output: len of data_out |
| 1686 |
* returns ENOSPC if data_out |
| 1687 |
* is too small. |
| 1688 |
*/ |
| 1689 |
__aligned_u64 data_in; |
| 1690 |
__aligned_u64 data_out; |
| 1691 |
__u32 repeat; |
| 1692 |
__u32 duration; |
| 1693 |
__u32 ctx_size_in; /* input: len of ctx_in */ |
| 1694 |
__u32 ctx_size_out; /* input/output: len of ctx_out |
| 1695 |
* returns ENOSPC if ctx_out |
| 1696 |
* is too small. |
| 1697 |
*/ |
| 1698 |
__aligned_u64 ctx_in; |
| 1699 |
__aligned_u64 ctx_out; |
| 1700 |
__u32 flags; |
| 1701 |
__u32 cpu; |
| 1702 |
__u32 batch_size; |
| 1703 |
} test; |
| 1704 |
|
| 1705 |
struct { /* anonymous struct used by BPF_*_GET_*_ID */ |
| 1706 |
union { |
| 1707 |
__u32 start_id; |
| 1708 |
__u32 prog_id; |
| 1709 |
__u32 map_id; |
| 1710 |
__u32 btf_id; |
| 1711 |
__u32 link_id; |
| 1712 |
}; |
| 1713 |
__u32 next_id; |
| 1714 |
__u32 open_flags; |
| 1715 |
__s32 fd_by_id_token_fd; |
| 1716 |
}; |
| 1717 |
|
| 1718 |
struct { /* anonymous struct used by BPF_OBJ_GET_INFO_BY_FD */ |
| 1719 |
__u32 bpf_fd; |
| 1720 |
__u32 info_len; |
| 1721 |
__aligned_u64 info; |
| 1722 |
} info; |
| 1723 |
|
| 1724 |
struct { /* anonymous struct used by BPF_PROG_QUERY command */ |
| 1725 |
union { |
| 1726 |
__u32 target_fd; /* target object to query or ... */ |
| 1727 |
__u32 target_ifindex; /* target ifindex */ |
| 1728 |
}; |
| 1729 |
__u32 attach_type; |
| 1730 |
__u32 query_flags; |
| 1731 |
__u32 attach_flags; |
| 1732 |
__aligned_u64 prog_ids; |
| 1733 |
union { |
| 1734 |
__u32 prog_cnt; |
| 1735 |
__u32 count; |
| 1736 |
}; |
| 1737 |
__u32 :32; |
| 1738 |
/* output: per-program attach_flags. |
| 1739 |
* not allowed to be set during effective query. |
| 1740 |
*/ |
| 1741 |
__aligned_u64 prog_attach_flags; |
| 1742 |
__aligned_u64 link_ids; |
| 1743 |
__aligned_u64 link_attach_flags; |
| 1744 |
__u64 revision; |
| 1745 |
} query; |
| 1746 |
|
| 1747 |
struct { /* anonymous struct used by BPF_RAW_TRACEPOINT_OPEN command */ |
| 1748 |
__u64 name; |
| 1749 |
__u32 prog_fd; |
| 1750 |
__u32 :32; |
| 1751 |
__aligned_u64 cookie; |
| 1752 |
} raw_tracepoint; |
| 1753 |
|
| 1754 |
struct { /* anonymous struct for BPF_BTF_LOAD */ |
| 1755 |
__aligned_u64 btf; |
| 1756 |
__aligned_u64 btf_log_buf; |
| 1757 |
__u32 btf_size; |
| 1758 |
__u32 btf_log_size; |
| 1759 |
__u32 btf_log_level; |
| 1760 |
/* output: actual total log contents size (including termintaing zero). |
| 1761 |
* It could be both larger than original log_size (if log was |
| 1762 |
* truncated), or smaller (if log buffer wasn't filled completely). |
| 1763 |
*/ |
| 1764 |
__u32 btf_log_true_size; |
| 1765 |
__u32 btf_flags; |
| 1766 |
/* BPF token FD to use with BPF_BTF_LOAD operation. |
| 1767 |
* If provided, btf_flags should have BPF_F_TOKEN_FD flag set. |
| 1768 |
*/ |
| 1769 |
__s32 btf_token_fd; |
| 1770 |
}; |
| 1771 |
|
| 1772 |
struct { |
| 1773 |
__u32 pid; /* input: pid */ |
| 1774 |
__u32 fd; /* input: fd */ |
| 1775 |
__u32 flags; /* input: flags */ |
| 1776 |
__u32 buf_len; /* input/output: buf len */ |
| 1777 |
__aligned_u64 buf; /* input/output: |
| 1778 |
* tp_name for tracepoint |
| 1779 |
* symbol for kprobe |
| 1780 |
* filename for uprobe |
| 1781 |
*/ |
| 1782 |
__u32 prog_id; /* output: prod_id */ |
| 1783 |
__u32 fd_type; /* output: BPF_FD_TYPE_* */ |
| 1784 |
__u64 probe_offset; /* output: probe_offset */ |
| 1785 |
__u64 probe_addr; /* output: probe_addr */ |
| 1786 |
} task_fd_query; |
| 1787 |
|
| 1788 |
struct { /* struct used by BPF_LINK_CREATE command */ |
| 1789 |
union { |
| 1790 |
__u32 prog_fd; /* eBPF program to attach */ |
| 1791 |
__u32 map_fd; /* struct_ops to attach */ |
| 1792 |
}; |
| 1793 |
union { |
| 1794 |
__u32 target_fd; /* target object to attach to or ... */ |
| 1795 |
__u32 target_ifindex; /* target ifindex */ |
| 1796 |
}; |
| 1797 |
__u32 attach_type; /* attach type */ |
| 1798 |
__u32 flags; /* extra flags */ |
| 1799 |
union { |
| 1800 |
__u32 target_btf_id; /* btf_id of target to attach to */ |
| 1801 |
struct { |
| 1802 |
__aligned_u64 iter_info; /* extra bpf_iter_link_info */ |
| 1803 |
__u32 iter_info_len; /* iter_info length */ |
| 1804 |
}; |
| 1805 |
struct { |
| 1806 |
/* black box user-provided value passed through |
| 1807 |
* to BPF program at the execution time and |
| 1808 |
* accessible through bpf_get_attach_cookie() BPF helper |
| 1809 |
*/ |
| 1810 |
__u64 bpf_cookie; |
| 1811 |
} perf_event; |
| 1812 |
struct { |
| 1813 |
__u32 flags; |
| 1814 |
__u32 cnt; |
| 1815 |
__aligned_u64 syms; |
| 1816 |
__aligned_u64 addrs; |
| 1817 |
__aligned_u64 cookies; |
| 1818 |
} kprobe_multi; |
| 1819 |
struct { |
| 1820 |
/* this is overlaid with the target_btf_id above. */ |
| 1821 |
__u32 target_btf_id; |
| 1822 |
/* black box user-provided value passed through |
| 1823 |
* to BPF program at the execution time and |
| 1824 |
* accessible through bpf_get_attach_cookie() BPF helper |
| 1825 |
*/ |
| 1826 |
__u64 cookie; |
| 1827 |
} tracing; |
| 1828 |
struct { |
| 1829 |
__u32 pf; |
| 1830 |
__u32 hooknum; |
| 1831 |
__s32 priority; |
| 1832 |
__u32 flags; |
| 1833 |
} netfilter; |
| 1834 |
struct { |
| 1835 |
union { |
| 1836 |
__u32 relative_fd; |
| 1837 |
__u32 relative_id; |
| 1838 |
}; |
| 1839 |
__u64 expected_revision; |
| 1840 |
} tcx; |
| 1841 |
struct { |
| 1842 |
__aligned_u64 path; |
| 1843 |
__aligned_u64 offsets; |
| 1844 |
__aligned_u64 ref_ctr_offsets; |
| 1845 |
__aligned_u64 cookies; |
| 1846 |
__u32 cnt; |
| 1847 |
__u32 flags; |
| 1848 |
__u32 pid; |
| 1849 |
} uprobe_multi; |
| 1850 |
struct { |
| 1851 |
union { |
| 1852 |
__u32 relative_fd; |
| 1853 |
__u32 relative_id; |
| 1854 |
}; |
| 1855 |
__u64 expected_revision; |
| 1856 |
} netkit; |
| 1857 |
struct { |
| 1858 |
union { |
| 1859 |
__u32 relative_fd; |
| 1860 |
__u32 relative_id; |
| 1861 |
}; |
| 1862 |
__u64 expected_revision; |
| 1863 |
} cgroup; |
| 1864 |
}; |
| 1865 |
} link_create; |
| 1866 |
|
| 1867 |
struct { /* struct used by BPF_LINK_UPDATE command */ |
| 1868 |
__u32 link_fd; /* link fd */ |
| 1869 |
union { |
| 1870 |
/* new program fd to update link with */ |
| 1871 |
__u32 new_prog_fd; |
| 1872 |
/* new struct_ops map fd to update link with */ |
| 1873 |
__u32 new_map_fd; |
| 1874 |
}; |
| 1875 |
__u32 flags; /* extra flags */ |
| 1876 |
union { |
| 1877 |
/* expected link's program fd; is specified only if |
| 1878 |
* BPF_F_REPLACE flag is set in flags. |
| 1879 |
*/ |
| 1880 |
__u32 old_prog_fd; |
| 1881 |
/* expected link's map fd; is specified only |
| 1882 |
* if BPF_F_REPLACE flag is set. |
| 1883 |
*/ |
| 1884 |
__u32 old_map_fd; |
| 1885 |
}; |
| 1886 |
} link_update; |
| 1887 |
|
| 1888 |
struct { |
| 1889 |
__u32 link_fd; |
| 1890 |
} link_detach; |
| 1891 |
|
| 1892 |
struct { /* struct used by BPF_ENABLE_STATS command */ |
| 1893 |
__u32 type; |
| 1894 |
} enable_stats; |
| 1895 |
|
| 1896 |
struct { /* struct used by BPF_ITER_CREATE command */ |
| 1897 |
__u32 link_fd; |
| 1898 |
__u32 flags; |
| 1899 |
} iter_create; |
| 1900 |
|
| 1901 |
struct { /* struct used by BPF_PROG_BIND_MAP command */ |
| 1902 |
__u32 prog_fd; |
| 1903 |
__u32 map_fd; |
| 1904 |
__u32 flags; /* extra flags */ |
| 1905 |
} prog_bind_map; |
| 1906 |
|
| 1907 |
struct { /* struct used by BPF_TOKEN_CREATE command */ |
| 1908 |
__u32 flags; |
| 1909 |
__u32 bpffs_fd; |
| 1910 |
} token_create; |
| 1911 |
|
| 1912 |
struct { |
| 1913 |
__aligned_u64 stream_buf; |
| 1914 |
__u32 stream_buf_len; |
| 1915 |
__u32 stream_id; |
| 1916 |
__u32 prog_fd; |
| 1917 |
} prog_stream_read; |
| 1918 |
|
| 1919 |
struct { |
| 1920 |
__u32 map_fd; |
| 1921 |
__u32 prog_fd; |
| 1922 |
__u32 flags; |
| 1923 |
} prog_assoc_struct_ops; |
| 1924 |
|
| 1925 |
} __attribute__((aligned(8))); |
| 1926 |
|
| 1927 |
/* The description below is an attempt at providing documentation to eBPF |
| 1928 |
* developers about the multiple available eBPF helper functions. It can be |
| 1929 |
* parsed and used to produce a manual page. The workflow is the following, |
| 1930 |
* and requires the rst2man utility: |
| 1931 |
* |
| 1932 |
* $ ./scripts/bpf_doc.py \ |
| 1933 |
* --filename include/uapi/linux/bpf.h > /tmp/bpf-helpers.rst |
| 1934 |
* $ rst2man /tmp/bpf-helpers.rst > /tmp/bpf-helpers.7 |
| 1935 |
* $ man /tmp/bpf-helpers.7 |
| 1936 |
* |
| 1937 |
* Note that in order to produce this external documentation, some RST |
| 1938 |
* formatting is used in the descriptions to get "bold" and "italics" in |
| 1939 |
* manual pages. Also note that the few trailing white spaces are |
| 1940 |
* intentional, removing them would break paragraphs for rst2man. |
| 1941 |
* |
| 1942 |
* Start of BPF helper function descriptions: |
| 1943 |
* |
| 1944 |
* void *bpf_map_lookup_elem(struct bpf_map *map, const void *key) |
| 1945 |
* Description |
| 1946 |
* Perform a lookup in *map* for an entry associated to *key*. |
| 1947 |
* Return |
| 1948 |
* Map value associated to *key*, or **NULL** if no entry was |
| 1949 |
* found. |
| 1950 |
* |
| 1951 |
* long bpf_map_update_elem(struct bpf_map *map, const void *key, const void *value, u64 flags) |
| 1952 |
* Description |
| 1953 |
* Add or update the value of the entry associated to *key* in |
| 1954 |
* *map* with *value*. *flags* is one of: |
| 1955 |
* |
| 1956 |
* **BPF_NOEXIST** |
| 1957 |
* The entry for *key* must not exist in the map. |
| 1958 |
* **BPF_EXIST** |
| 1959 |
* The entry for *key* must already exist in the map. |
| 1960 |
* **BPF_ANY** |
| 1961 |
* No condition on the existence of the entry for *key*. |
| 1962 |
* |
| 1963 |
* Flag value **BPF_NOEXIST** cannot be used for maps of types |
| 1964 |
* **BPF_MAP_TYPE_ARRAY** or **BPF_MAP_TYPE_PERCPU_ARRAY** (all |
| 1965 |
* elements always exist), the helper would return an error. |
| 1966 |
* Return |
| 1967 |
* 0 on success, or a negative error in case of failure. |
| 1968 |
* |
| 1969 |
* long bpf_map_delete_elem(struct bpf_map *map, const void *key) |
| 1970 |
* Description |
| 1971 |
* Delete entry with *key* from *map*. |
| 1972 |
* Return |
| 1973 |
* 0 on success, or a negative error in case of failure. |
| 1974 |
* |
| 1975 |
* long bpf_probe_read(void *dst, u32 size, const void *unsafe_ptr) |
| 1976 |
* Description |
| 1977 |
* For tracing programs, safely attempt to read *size* bytes from |
| 1978 |
* kernel space address *unsafe_ptr* and store the data in *dst*. |
| 1979 |
* |
| 1980 |
* Generally, use **bpf_probe_read_user**\ () or |
| 1981 |
* **bpf_probe_read_kernel**\ () instead. |
| 1982 |
* Return |
| 1983 |
* 0 on success, or a negative error in case of failure. |
| 1984 |
* |
| 1985 |
* u64 bpf_ktime_get_ns(void) |
| 1986 |
* Description |
| 1987 |
* Return the time elapsed since system boot, in nanoseconds. |
| 1988 |
* Does not include time the system was suspended. |
| 1989 |
* See: **clock_gettime**\ (**CLOCK_MONOTONIC**) |
| 1990 |
* Return |
| 1991 |
* Current *ktime*. |
| 1992 |
* |
| 1993 |
* long bpf_trace_printk(const char *fmt, u32 fmt_size, ...) |
| 1994 |
* Description |
| 1995 |
* This helper is a "printk()-like" facility for debugging. It |
| 1996 |
* prints a message defined by format *fmt* (of size *fmt_size*) |
| 1997 |
* to file *\/sys/kernel/tracing/trace* from TraceFS, if |
| 1998 |
* available. It can take up to three additional **u64** |
| 1999 |
* arguments (as an eBPF helpers, the total number of arguments is |
| 2000 |
* limited to five). |
| 2001 |
* |
| 2002 |
* Each time the helper is called, it appends a line to the trace. |
| 2003 |
* Lines are discarded while *\/sys/kernel/tracing/trace* is |
| 2004 |
* open, use *\/sys/kernel/tracing/trace_pipe* to avoid this. |
| 2005 |
* The format of the trace is customizable, and the exact output |
| 2006 |
* one will get depends on the options set in |
| 2007 |
* *\/sys/kernel/tracing/trace_options* (see also the |
| 2008 |
* *README* file under the same directory). However, it usually |
| 2009 |
* defaults to something like: |
| 2010 |
* |
| 2011 |
* :: |
| 2012 |
* |
| 2013 |
* telnet-470 [001] .N.. 419421.045894: 0x00000001: <formatted msg> |
| 2014 |
* |
| 2015 |
* In the above: |
| 2016 |
* |
| 2017 |
* * ``telnet`` is the name of the current task. |
| 2018 |
* * ``470`` is the PID of the current task. |
| 2019 |
* * ``001`` is the CPU number on which the task is |
| 2020 |
* running. |
| 2021 |
* * In ``.N..``, each character refers to a set of |
| 2022 |
* options (whether irqs are enabled, scheduling |
| 2023 |
* options, whether hard/softirqs are running, level of |
| 2024 |
* preempt_disabled respectively). **N** means that |
| 2025 |
* **TIF_NEED_RESCHED** and **PREEMPT_NEED_RESCHED** |
| 2026 |
* are set. |
| 2027 |
* * ``419421.045894`` is a timestamp. |
| 2028 |
* * ``0x00000001`` is a fake value used by BPF for the |
| 2029 |
* instruction pointer register. |
| 2030 |
* * ``<formatted msg>`` is the message formatted with |
| 2031 |
* *fmt*. |
| 2032 |
* |
| 2033 |
* The conversion specifiers supported by *fmt* are similar, but |
| 2034 |
* more limited than for printk(). They are **%d**, **%i**, |
| 2035 |
* **%u**, **%x**, **%ld**, **%li**, **%lu**, **%lx**, **%lld**, |
| 2036 |
* **%lli**, **%llu**, **%llx**, **%p**, **%s**. No modifier (size |
| 2037 |
* of field, padding with zeroes, etc.) is available, and the |
| 2038 |
* helper will return **-EINVAL** (but print nothing) if it |
| 2039 |
* encounters an unknown specifier. |
| 2040 |
* |
| 2041 |
* Also, note that **bpf_trace_printk**\ () is slow, and should |
| 2042 |
* only be used for debugging purposes. For this reason, a notice |
| 2043 |
* block (spanning several lines) is printed to kernel logs and |
| 2044 |
* states that the helper should not be used "for production use" |
| 2045 |
* the first time this helper is used (or more precisely, when |
| 2046 |
* **trace_printk**\ () buffers are allocated). For passing values |
| 2047 |
* to user space, perf events should be preferred. |
| 2048 |
* Return |
| 2049 |
* The number of bytes written to the buffer, or a negative error |
| 2050 |
* in case of failure. |
| 2051 |
* |
| 2052 |
* u32 bpf_get_prandom_u32(void) |
| 2053 |
* Description |
| 2054 |
* Get a pseudo-random number. |
| 2055 |
* |
| 2056 |
* From a security point of view, this helper uses its own |
| 2057 |
* pseudo-random internal state, and cannot be used to infer the |
| 2058 |
* seed of other random functions in the kernel. However, it is |
| 2059 |
* essential to note that the generator used by the helper is not |
| 2060 |
* cryptographically secure. |
| 2061 |
* Return |
| 2062 |
* A random 32-bit unsigned value. |
| 2063 |
* |
| 2064 |
* u32 bpf_get_smp_processor_id(void) |
| 2065 |
* Description |
| 2066 |
* Get the SMP (symmetric multiprocessing) processor id. Note that |
| 2067 |
* all programs run with migration disabled, which means that the |
| 2068 |
* SMP processor id is stable during all the execution of the |
| 2069 |
* program. |
| 2070 |
* Return |
| 2071 |
* The SMP id of the processor running the program. |
| 2072 |
* Attributes |
| 2073 |
* __bpf_fastcall |
| 2074 |
* |
| 2075 |
* long bpf_skb_store_bytes(struct sk_buff *skb, u32 offset, const void *from, u32 len, u64 flags) |
| 2076 |
* Description |
| 2077 |
* Store *len* bytes from address *from* into the packet |
| 2078 |
* associated to *skb*, at *offset*. The *flags* are a combination |
| 2079 |
* of the following values: |
| 2080 |
* |
| 2081 |
* **BPF_F_RECOMPUTE_CSUM** |
| 2082 |
* Automatically update *skb*\ **->csum** after storing the |
| 2083 |
* bytes. |
| 2084 |
* **BPF_F_INVALIDATE_HASH** |
| 2085 |
* Set *skb*\ **->hash**, *skb*\ **->swhash** and *skb*\ |
| 2086 |
* **->l4hash** to 0. |
| 2087 |
* |
| 2088 |
* A call to this helper is susceptible to change the underlying |
| 2089 |
* packet buffer. Therefore, at load time, all checks on pointers |
| 2090 |
* previously done by the verifier are invalidated and must be |
| 2091 |
* performed again, if the helper is used in combination with |
| 2092 |
* direct packet access. |
| 2093 |
* Return |
| 2094 |
* 0 on success, or a negative error in case of failure. |
| 2095 |
* |
| 2096 |
* long bpf_l3_csum_replace(struct sk_buff *skb, u32 offset, u64 from, u64 to, u64 size) |
| 2097 |
* Description |
| 2098 |
* Recompute the layer 3 (e.g. IP) checksum for the packet |
| 2099 |
* associated to *skb*. Computation is incremental, so the helper |
| 2100 |
* must know the former value of the header field that was |
| 2101 |
* modified (*from*), the new value of this field (*to*), and the |
| 2102 |
* number of bytes (2 or 4) for this field, stored in *size*. |
| 2103 |
* Alternatively, it is possible to store the difference between |
| 2104 |
* the previous and the new values of the header field in *to*, by |
| 2105 |
* setting *from* and *size* to 0. For both methods, *offset* |
| 2106 |
* indicates the location of the IP checksum within the packet. |
| 2107 |
* |
| 2108 |
* This helper works in combination with **bpf_csum_diff**\ (), |
| 2109 |
* which does not update the checksum in-place, but offers more |
| 2110 |
* flexibility and can handle sizes larger than 2 or 4 for the |
| 2111 |
* checksum to update. |
| 2112 |
* |
| 2113 |
* A call to this helper is susceptible to change the underlying |
| 2114 |
* packet buffer. Therefore, at load time, all checks on pointers |
| 2115 |
* previously done by the verifier are invalidated and must be |
| 2116 |
* performed again, if the helper is used in combination with |
| 2117 |
* direct packet access. |
| 2118 |
* Return |
| 2119 |
* 0 on success, or a negative error in case of failure. |
| 2120 |
* |
| 2121 |
* long bpf_l4_csum_replace(struct sk_buff *skb, u32 offset, u64 from, u64 to, u64 flags) |
| 2122 |
* Description |
| 2123 |
* Recompute the layer 4 (e.g. TCP, UDP or ICMP) checksum for the |
| 2124 |
* packet associated to *skb*. Computation is incremental, so the |
| 2125 |
* helper must know the former value of the header field that was |
| 2126 |
* modified (*from*), the new value of this field (*to*), and the |
| 2127 |
* number of bytes (2 or 4) for this field, stored on the lowest |
| 2128 |
* four bits of *flags*. Alternatively, it is possible to store |
| 2129 |
* the difference between the previous and the new values of the |
| 2130 |
* header field in *to*, by setting *from* and the four lowest |
| 2131 |
* bits of *flags* to 0. For both methods, *offset* indicates the |
| 2132 |
* location of the IP checksum within the packet. In addition to |
| 2133 |
* the size of the field, *flags* can be added (bitwise OR) actual |
| 2134 |
* flags. With **BPF_F_MARK_MANGLED_0**, a null checksum is left |
| 2135 |
* untouched (unless **BPF_F_MARK_ENFORCE** is added as well), and |
| 2136 |
* for updates resulting in a null checksum the value is set to |
| 2137 |
* **CSUM_MANGLED_0** instead. Flag **BPF_F_PSEUDO_HDR** indicates |
| 2138 |
* that the modified header field is part of the pseudo-header. |
| 2139 |
* Flag **BPF_F_IPV6** should be set for IPv6 packets. |
| 2140 |
* |
| 2141 |
* This helper works in combination with **bpf_csum_diff**\ (), |
| 2142 |
* which does not update the checksum in-place, but offers more |
| 2143 |
* flexibility and can handle sizes larger than 2 or 4 for the |
| 2144 |
* checksum to update. |
| 2145 |
* |
| 2146 |
* A call to this helper is susceptible to change the underlying |
| 2147 |
* packet buffer. Therefore, at load time, all checks on pointers |
| 2148 |
* previously done by the verifier are invalidated and must be |
| 2149 |
* performed again, if the helper is used in combination with |
| 2150 |
* direct packet access. |
| 2151 |
* Return |
| 2152 |
* 0 on success, or a negative error in case of failure. |
| 2153 |
* |
| 2154 |
* long bpf_tail_call(void *ctx, struct bpf_map *prog_array_map, u32 index) |
| 2155 |
* Description |
| 2156 |
* This special helper is used to trigger a "tail call", or in |
| 2157 |
* other words, to jump into another eBPF program. The same stack |
| 2158 |
* frame is used (but values on stack and in registers for the |
| 2159 |
* caller are not accessible to the callee). This mechanism allows |
| 2160 |
* for program chaining, either for raising the maximum number of |
| 2161 |
* available eBPF instructions, or to execute given programs in |
| 2162 |
* conditional blocks. For security reasons, there is an upper |
| 2163 |
* limit to the number of successive tail calls that can be |
| 2164 |
* performed. |
| 2165 |
* |
| 2166 |
* Upon call of this helper, the program attempts to jump into a |
| 2167 |
* program referenced at index *index* in *prog_array_map*, a |
| 2168 |
* special map of type **BPF_MAP_TYPE_PROG_ARRAY**, and passes |
| 2169 |
* *ctx*, a pointer to the context. |
| 2170 |
* |
| 2171 |
* If the call succeeds, the kernel immediately runs the first |
| 2172 |
* instruction of the new program. This is not a function call, |
| 2173 |
* and it never returns to the previous program. If the call |
| 2174 |
* fails, then the helper has no effect, and the caller continues |
| 2175 |
* to run its subsequent instructions. A call can fail if the |
| 2176 |
* destination program for the jump does not exist (i.e. *index* |
| 2177 |
* is superior to the number of entries in *prog_array_map*), or |
| 2178 |
* if the maximum number of tail calls has been reached for this |
| 2179 |
* chain of programs. This limit is defined in the kernel by the |
| 2180 |
* macro **MAX_TAIL_CALL_CNT** (not accessible to user space), |
| 2181 |
* which is currently set to 33. |
| 2182 |
* Return |
| 2183 |
* 0 on success, or a negative error in case of failure. |
| 2184 |
* |
| 2185 |
* long bpf_clone_redirect(struct sk_buff *skb, u32 ifindex, u64 flags) |
| 2186 |
* Description |
| 2187 |
* Clone and redirect the packet associated to *skb* to another |
| 2188 |
* net device of index *ifindex*. Both ingress and egress |
| 2189 |
* interfaces can be used for redirection. The **BPF_F_INGRESS** |
| 2190 |
* value in *flags* is used to make the distinction (ingress path |
| 2191 |
* is selected if the flag is present, egress path otherwise). |
| 2192 |
* This is the only flag supported for now. |
| 2193 |
* |
| 2194 |
* In comparison with **bpf_redirect**\ () helper, |
| 2195 |
* **bpf_clone_redirect**\ () has the associated cost of |
| 2196 |
* duplicating the packet buffer, but this can be executed out of |
| 2197 |
* the eBPF program. Conversely, **bpf_redirect**\ () is more |
| 2198 |
* efficient, but it is handled through an action code where the |
| 2199 |
* redirection happens only after the eBPF program has returned. |
| 2200 |
* |
| 2201 |
* A call to this helper is susceptible to change the underlying |
| 2202 |
* packet buffer. Therefore, at load time, all checks on pointers |
| 2203 |
* previously done by the verifier are invalidated and must be |
| 2204 |
* performed again, if the helper is used in combination with |
| 2205 |
* direct packet access. |
| 2206 |
* Return |
| 2207 |
* 0 on success, or a negative error in case of failure. Positive |
| 2208 |
* error indicates a potential drop or congestion in the target |
| 2209 |
* device. The particular positive error codes are not defined. |
| 2210 |
* |
| 2211 |
* u64 bpf_get_current_pid_tgid(void) |
| 2212 |
* Description |
| 2213 |
* Get the current pid and tgid. |
| 2214 |
* Return |
| 2215 |
* A 64-bit integer containing the current tgid and pid, and |
| 2216 |
* created as such: |
| 2217 |
* *current_task*\ **->tgid << 32 \|** |
| 2218 |
* *current_task*\ **->pid**. |
| 2219 |
* |
| 2220 |
* u64 bpf_get_current_uid_gid(void) |
| 2221 |
* Description |
| 2222 |
* Get the current uid and gid. |
| 2223 |
* Return |
| 2224 |
* A 64-bit integer containing the current GID and UID, and |
| 2225 |
* created as such: *current_gid* **<< 32 \|** *current_uid*. |
| 2226 |
* |
| 2227 |
* long bpf_get_current_comm(void *buf, u32 size_of_buf) |
| 2228 |
* Description |
| 2229 |
* Copy the **comm** attribute of the current task into *buf* of |
| 2230 |
* *size_of_buf*. The **comm** attribute contains the name of |
| 2231 |
* the executable (excluding the path) for the current task. The |
| 2232 |
* *size_of_buf* must be strictly positive. On success, the |
| 2233 |
* helper makes sure that the *buf* is NUL-terminated. On failure, |
| 2234 |
* it is filled with zeroes. |
| 2235 |
* Return |
| 2236 |
* 0 on success, or a negative error in case of failure. |
| 2237 |
* |
| 2238 |
* u32 bpf_get_cgroup_classid(struct sk_buff *skb) |
| 2239 |
* Description |
| 2240 |
* Retrieve the classid for the current task, i.e. for the net_cls |
| 2241 |
* cgroup to which *skb* belongs. |
| 2242 |
* |
| 2243 |
* This helper can be used on TC egress path, but not on ingress. |
| 2244 |
* |
| 2245 |
* The net_cls cgroup provides an interface to tag network packets |
| 2246 |
* based on a user-provided identifier for all traffic coming from |
| 2247 |
* the tasks belonging to the related cgroup. See also the related |
| 2248 |
* kernel documentation, available from the Linux sources in file |
| 2249 |
* *Documentation/admin-guide/cgroup-v1/net_cls.rst*. |
| 2250 |
* |
| 2251 |
* The Linux kernel has two versions for cgroups: there are |
| 2252 |
* cgroups v1 and cgroups v2. Both are available to users, who can |
| 2253 |
* use a mixture of them, but note that the net_cls cgroup is for |
| 2254 |
* cgroup v1 only. This makes it incompatible with BPF programs |
| 2255 |
* run on cgroups, which is a cgroup-v2-only feature (a socket can |
| 2256 |
* only hold data for one version of cgroups at a time). |
| 2257 |
* |
| 2258 |
* This helper is only available is the kernel was compiled with |
| 2259 |
* the **CONFIG_CGROUP_NET_CLASSID** configuration option set to |
| 2260 |
* "**y**" or to "**m**". |
| 2261 |
* Return |
| 2262 |
* The classid, or 0 for the default unconfigured classid. |
| 2263 |
* |
| 2264 |
* long bpf_skb_vlan_push(struct sk_buff *skb, __be16 vlan_proto, u16 vlan_tci) |
| 2265 |
* Description |
| 2266 |
* Push a *vlan_tci* (VLAN tag control information) of protocol |
| 2267 |
* *vlan_proto* to the packet associated to *skb*, then update |
| 2268 |
* the checksum. Note that if *vlan_proto* is different from |
| 2269 |
* **ETH_P_8021Q** and **ETH_P_8021AD**, it is considered to |
| 2270 |
* be **ETH_P_8021Q**. |
| 2271 |
* |
| 2272 |
* A call to this helper is susceptible to change the underlying |
| 2273 |
* packet buffer. Therefore, at load time, all checks on pointers |
| 2274 |
* previously done by the verifier are invalidated and must be |
| 2275 |
* performed again, if the helper is used in combination with |
| 2276 |
* direct packet access. |
| 2277 |
* Return |
| 2278 |
* 0 on success, or a negative error in case of failure. |
| 2279 |
* |
| 2280 |
* long bpf_skb_vlan_pop(struct sk_buff *skb) |
| 2281 |
* Description |
| 2282 |
* Pop a VLAN header from the packet associated to *skb*. |
| 2283 |
* |
| 2284 |
* A call to this helper is susceptible to change the underlying |
| 2285 |
* packet buffer. Therefore, at load time, all checks on pointers |
| 2286 |
* previously done by the verifier are invalidated and must be |
| 2287 |
* performed again, if the helper is used in combination with |
| 2288 |
* direct packet access. |
| 2289 |
* Return |
| 2290 |
* 0 on success, or a negative error in case of failure. |
| 2291 |
* |
| 2292 |
* long bpf_skb_get_tunnel_key(struct sk_buff *skb, struct bpf_tunnel_key *key, u32 size, u64 flags) |
| 2293 |
* Description |
| 2294 |
* Get tunnel metadata. This helper takes a pointer *key* to an |
| 2295 |
* empty **struct bpf_tunnel_key** of **size**, that will be |
| 2296 |
* filled with tunnel metadata for the packet associated to *skb*. |
| 2297 |
* The *flags* can be set to **BPF_F_TUNINFO_IPV6**, which |
| 2298 |
* indicates that the tunnel is based on IPv6 protocol instead of |
| 2299 |
* IPv4. |
| 2300 |
* |
| 2301 |
* The **struct bpf_tunnel_key** is an object that generalizes the |
| 2302 |
* principal parameters used by various tunneling protocols into a |
| 2303 |
* single struct. This way, it can be used to easily make a |
| 2304 |
* decision based on the contents of the encapsulation header, |
| 2305 |
* "summarized" in this struct. In particular, it holds the IP |
| 2306 |
* address of the remote end (IPv4 or IPv6, depending on the case) |
| 2307 |
* in *key*\ **->remote_ipv4** or *key*\ **->remote_ipv6**. Also, |
| 2308 |
* this struct exposes the *key*\ **->tunnel_id**, which is |
| 2309 |
* generally mapped to a VNI (Virtual Network Identifier), making |
| 2310 |
* it programmable together with the **bpf_skb_set_tunnel_key**\ |
| 2311 |
* () helper. |
| 2312 |
* |
| 2313 |
* Let's imagine that the following code is part of a program |
| 2314 |
* attached to the TC ingress interface, on one end of a GRE |
| 2315 |
* tunnel, and is supposed to filter out all messages coming from |
| 2316 |
* remote ends with IPv4 address other than 10.0.0.1: |
| 2317 |
* |
| 2318 |
* :: |
| 2319 |
* |
| 2320 |
* int ret; |
| 2321 |
* struct bpf_tunnel_key key = {}; |
| 2322 |
* |
| 2323 |
* ret = bpf_skb_get_tunnel_key(skb, &key, sizeof(key), 0); |
| 2324 |
* if (ret < 0) |
| 2325 |
* return TC_ACT_SHOT; // drop packet |
| 2326 |
* |
| 2327 |
* if (key.remote_ipv4 != 0x0a000001) |
| 2328 |
* return TC_ACT_SHOT; // drop packet |
| 2329 |
* |
| 2330 |
* return TC_ACT_OK; // accept packet |
| 2331 |
* |
| 2332 |
* This interface can also be used with all encapsulation devices |
| 2333 |
* that can operate in "collect metadata" mode: instead of having |
| 2334 |
* one network device per specific configuration, the "collect |
| 2335 |
* metadata" mode only requires a single device where the |
| 2336 |
* configuration can be extracted from this helper. |
| 2337 |
* |
| 2338 |
* This can be used together with various tunnels such as VXLan, |
| 2339 |
* Geneve, GRE or IP in IP (IPIP). |
| 2340 |
* Return |
| 2341 |
* 0 on success, or a negative error in case of failure. |
| 2342 |
* |
| 2343 |
* long bpf_skb_set_tunnel_key(struct sk_buff *skb, struct bpf_tunnel_key *key, u32 size, u64 flags) |
| 2344 |
* Description |
| 2345 |
* Populate tunnel metadata for packet associated to *skb.* The |
| 2346 |
* tunnel metadata is set to the contents of *key*, of *size*. The |
| 2347 |
* *flags* can be set to a combination of the following values: |
| 2348 |
* |
| 2349 |
* **BPF_F_TUNINFO_IPV6** |
| 2350 |
* Indicate that the tunnel is based on IPv6 protocol |
| 2351 |
* instead of IPv4. |
| 2352 |
* **BPF_F_ZERO_CSUM_TX** |
| 2353 |
* For IPv4 packets, add a flag to tunnel metadata |
| 2354 |
* indicating that checksum computation should be skipped |
| 2355 |
* and checksum set to zeroes. |
| 2356 |
* **BPF_F_DONT_FRAGMENT** |
| 2357 |
* Add a flag to tunnel metadata indicating that the |
| 2358 |
* packet should not be fragmented. |
| 2359 |
* **BPF_F_SEQ_NUMBER** |
| 2360 |
* Add a flag to tunnel metadata indicating that a |
| 2361 |
* sequence number should be added to tunnel header before |
| 2362 |
* sending the packet. This flag was added for GRE |
| 2363 |
* encapsulation, but might be used with other protocols |
| 2364 |
* as well in the future. |
| 2365 |
* **BPF_F_NO_TUNNEL_KEY** |
| 2366 |
* Add a flag to tunnel metadata indicating that no tunnel |
| 2367 |
* key should be set in the resulting tunnel header. |
| 2368 |
* |
| 2369 |
* Here is a typical usage on the transmit path: |
| 2370 |
* |
| 2371 |
* :: |
| 2372 |
* |
| 2373 |
* struct bpf_tunnel_key key; |
| 2374 |
* populate key ... |
| 2375 |
* bpf_skb_set_tunnel_key(skb, &key, sizeof(key), 0); |
| 2376 |
* bpf_clone_redirect(skb, vxlan_dev_ifindex, 0); |
| 2377 |
* |
| 2378 |
* See also the description of the **bpf_skb_get_tunnel_key**\ () |
| 2379 |
* helper for additional information. |
| 2380 |
* Return |
| 2381 |
* 0 on success, or a negative error in case of failure. |
| 2382 |
* |
| 2383 |
* u64 bpf_perf_event_read(struct bpf_map *map, u64 flags) |
| 2384 |
* Description |
| 2385 |
* Read the value of a perf event counter. This helper relies on a |
| 2386 |
* *map* of type **BPF_MAP_TYPE_PERF_EVENT_ARRAY**. The nature of |
| 2387 |
* the perf event counter is selected when *map* is updated with |
| 2388 |
* perf event file descriptors. The *map* is an array whose size |
| 2389 |
* is the number of available CPUs, and each cell contains a value |
| 2390 |
* relative to one CPU. The value to retrieve is indicated by |
| 2391 |
* *flags*, that contains the index of the CPU to look up, masked |
| 2392 |
* with **BPF_F_INDEX_MASK**. Alternatively, *flags* can be set to |
| 2393 |
* **BPF_F_CURRENT_CPU** to indicate that the value for the |
| 2394 |
* current CPU should be retrieved. |
| 2395 |
* |
| 2396 |
* Note that before Linux 4.13, only hardware perf event can be |
| 2397 |
* retrieved. |
| 2398 |
* |
| 2399 |
* Also, be aware that the newer helper |
| 2400 |
* **bpf_perf_event_read_value**\ () is recommended over |
| 2401 |
* **bpf_perf_event_read**\ () in general. The latter has some ABI |
| 2402 |
* quirks where error and counter value are used as a return code |
| 2403 |
* (which is wrong to do since ranges may overlap). This issue is |
| 2404 |
* fixed with **bpf_perf_event_read_value**\ (), which at the same |
| 2405 |
* time provides more features over the **bpf_perf_event_read**\ |
| 2406 |
* () interface. Please refer to the description of |
| 2407 |
* **bpf_perf_event_read_value**\ () for details. |
| 2408 |
* Return |
| 2409 |
* The value of the perf event counter read from the map, or a |
| 2410 |
* negative error code in case of failure. |
| 2411 |
* |
| 2412 |
* long bpf_redirect(u32 ifindex, u64 flags) |
| 2413 |
* Description |
| 2414 |
* Redirect the packet to another net device of index *ifindex*. |
| 2415 |
* This helper is somewhat similar to **bpf_clone_redirect**\ |
| 2416 |
* (), except that the packet is not cloned, which provides |
| 2417 |
* increased performance. |
| 2418 |
* |
| 2419 |
* Except for XDP, both ingress and egress interfaces can be used |
| 2420 |
* for redirection. The **BPF_F_INGRESS** value in *flags* is used |
| 2421 |
* to make the distinction (ingress path is selected if the flag |
| 2422 |
* is present, egress path otherwise). Currently, XDP only |
| 2423 |
* supports redirection to the egress interface, and accepts no |
| 2424 |
* flag at all. |
| 2425 |
* |
| 2426 |
* The same effect can also be attained with the more generic |
| 2427 |
* **bpf_redirect_map**\ (), which uses a BPF map to store the |
| 2428 |
* redirect target instead of providing it directly to the helper. |
| 2429 |
* Return |
| 2430 |
* For XDP, the helper returns **XDP_REDIRECT** on success or |
| 2431 |
* **XDP_ABORTED** on error. For other program types, the values |
| 2432 |
* are **TC_ACT_REDIRECT** on success or **TC_ACT_SHOT** on |
| 2433 |
* error. |
| 2434 |
* |
| 2435 |
* u32 bpf_get_route_realm(struct sk_buff *skb) |
| 2436 |
* Description |
| 2437 |
* Retrieve the realm or the route, that is to say the |
| 2438 |
* **tclassid** field of the destination for the *skb*. The |
| 2439 |
* identifier retrieved is a user-provided tag, similar to the |
| 2440 |
* one used with the net_cls cgroup (see description for |
| 2441 |
* **bpf_get_cgroup_classid**\ () helper), but here this tag is |
| 2442 |
* held by a route (a destination entry), not by a task. |
| 2443 |
* |
| 2444 |
* Retrieving this identifier works with the clsact TC egress hook |
| 2445 |
* (see also **tc-bpf(8)**), or alternatively on conventional |
| 2446 |
* classful egress qdiscs, but not on TC ingress path. In case of |
| 2447 |
* clsact TC egress hook, this has the advantage that, internally, |
| 2448 |
* the destination entry has not been dropped yet in the transmit |
| 2449 |
* path. Therefore, the destination entry does not need to be |
| 2450 |
* artificially held via **netif_keep_dst**\ () for a classful |
| 2451 |
* qdisc until the *skb* is freed. |
| 2452 |
* |
| 2453 |
* This helper is available only if the kernel was compiled with |
| 2454 |
* **CONFIG_IP_ROUTE_CLASSID** configuration option. |
| 2455 |
* Return |
| 2456 |
* The realm of the route for the packet associated to *skb*, or 0 |
| 2457 |
* if none was found. |
| 2458 |
* |
| 2459 |
* long bpf_perf_event_output(void *ctx, struct bpf_map *map, u64 flags, void *data, u64 size) |
| 2460 |
* Description |
| 2461 |
* Write raw *data* blob into a special BPF perf event held by |
| 2462 |
* *map* of type **BPF_MAP_TYPE_PERF_EVENT_ARRAY**. This perf |
| 2463 |
* event must have the following attributes: **PERF_SAMPLE_RAW** |
| 2464 |
* as **sample_type**, **PERF_TYPE_SOFTWARE** as **type**, and |
| 2465 |
* **PERF_COUNT_SW_BPF_OUTPUT** as **config**. |
| 2466 |
* |
| 2467 |
* The *flags* are used to indicate the index in *map* for which |
| 2468 |
* the value must be put, masked with **BPF_F_INDEX_MASK**. |
| 2469 |
* Alternatively, *flags* can be set to **BPF_F_CURRENT_CPU** |
| 2470 |
* to indicate that the index of the current CPU core should be |
| 2471 |
* used. |
| 2472 |
* |
| 2473 |
* The value to write, of *size*, is passed through eBPF stack and |
| 2474 |
* pointed by *data*. |
| 2475 |
* |
| 2476 |
* The context of the program *ctx* needs also be passed to the |
| 2477 |
* helper. |
| 2478 |
* |
| 2479 |
* On user space, a program willing to read the values needs to |
| 2480 |
* call **perf_event_open**\ () on the perf event (either for |
| 2481 |
* one or for all CPUs) and to store the file descriptor into the |
| 2482 |
* *map*. This must be done before the eBPF program can send data |
| 2483 |
* into it. An example is available in file |
| 2484 |
* *samples/bpf/trace_output_user.c* in the Linux kernel source |
| 2485 |
* tree (the eBPF program counterpart is in |
| 2486 |
* *samples/bpf/trace_output.bpf.c*). |
| 2487 |
* |
| 2488 |
* **bpf_perf_event_output**\ () achieves better performance |
| 2489 |
* than **bpf_trace_printk**\ () for sharing data with user |
| 2490 |
* space, and is much better suitable for streaming data from eBPF |
| 2491 |
* programs. |
| 2492 |
* |
| 2493 |
* Note that this helper is not restricted to tracing use cases |
| 2494 |
* and can be used with programs attached to TC or XDP as well, |
| 2495 |
* where it allows for passing data to user space listeners. Data |
| 2496 |
* can be: |
| 2497 |
* |
| 2498 |
* * Only custom structs, |
| 2499 |
* * Only the packet payload, or |
| 2500 |
* * A combination of both. |
| 2501 |
* Return |
| 2502 |
* 0 on success, or a negative error in case of failure. |
| 2503 |
* |
| 2504 |
* long bpf_skb_load_bytes(const void *skb, u32 offset, void *to, u32 len) |
| 2505 |
* Description |
| 2506 |
* This helper was provided as an easy way to load data from a |
| 2507 |
* packet. It can be used to load *len* bytes from *offset* from |
| 2508 |
* the packet associated to *skb*, into the buffer pointed by |
| 2509 |
* *to*. |
| 2510 |
* |
| 2511 |
* Since Linux 4.7, usage of this helper has mostly been replaced |
| 2512 |
* by "direct packet access", enabling packet data to be |
| 2513 |
* manipulated with *skb*\ **->data** and *skb*\ **->data_end** |
| 2514 |
* pointing respectively to the first byte of packet data and to |
| 2515 |
* the byte after the last byte of packet data. However, it |
| 2516 |
* remains useful if one wishes to read large quantities of data |
| 2517 |
* at once from a packet into the eBPF stack. |
| 2518 |
* Return |
| 2519 |
* 0 on success, or a negative error in case of failure. |
| 2520 |
* |
| 2521 |
* long bpf_get_stackid(void *ctx, struct bpf_map *map, u64 flags) |
| 2522 |
* Description |
| 2523 |
* Walk a user or a kernel stack and return its id. To achieve |
| 2524 |
* this, the helper needs *ctx*, which is a pointer to the context |
| 2525 |
* on which the tracing program is executed, and a pointer to a |
| 2526 |
* *map* of type **BPF_MAP_TYPE_STACK_TRACE**. |
| 2527 |
* |
| 2528 |
* The last argument, *flags*, holds the number of stack frames to |
| 2529 |
* skip (from 0 to 255), masked with |
| 2530 |
* **BPF_F_SKIP_FIELD_MASK**. The next bits can be used to set |
| 2531 |
* a combination of the following flags: |
| 2532 |
* |
| 2533 |
* **BPF_F_USER_STACK** |
| 2534 |
* Collect a user space stack instead of a kernel stack. |
| 2535 |
* **BPF_F_FAST_STACK_CMP** |
| 2536 |
* Compare stacks by hash only. |
| 2537 |
* **BPF_F_REUSE_STACKID** |
| 2538 |
* If two different stacks hash into the same *stackid*, |
| 2539 |
* discard the old one. |
| 2540 |
* |
| 2541 |
* The stack id retrieved is a 32 bit long integer handle which |
| 2542 |
* can be further combined with other data (including other stack |
| 2543 |
* ids) and used as a key into maps. This can be useful for |
| 2544 |
* generating a variety of graphs (such as flame graphs or off-cpu |
| 2545 |
* graphs). |
| 2546 |
* |
| 2547 |
* For walking a stack, this helper is an improvement over |
| 2548 |
* **bpf_probe_read**\ (), which can be used with unrolled loops |
| 2549 |
* but is not efficient and consumes a lot of eBPF instructions. |
| 2550 |
* Instead, **bpf_get_stackid**\ () can collect up to |
| 2551 |
* **PERF_MAX_STACK_DEPTH** both kernel and user frames. Note that |
| 2552 |
* this limit can be controlled with the **sysctl** program, and |
| 2553 |
* that it should be manually increased in order to profile long |
| 2554 |
* user stacks (such as stacks for Java programs). To do so, use: |
| 2555 |
* |
| 2556 |
* :: |
| 2557 |
* |
| 2558 |
* # sysctl kernel.perf_event_max_stack=<new value> |
| 2559 |
* Return |
| 2560 |
* The positive or null stack id on success, or a negative error |
| 2561 |
* in case of failure. |
| 2562 |
* |
| 2563 |
* s64 bpf_csum_diff(__be32 *from, u32 from_size, __be32 *to, u32 to_size, __wsum seed) |
| 2564 |
* Description |
| 2565 |
* Compute a checksum difference, from the raw buffer pointed by |
| 2566 |
* *from*, of length *from_size* (that must be a multiple of 4), |
| 2567 |
* towards the raw buffer pointed by *to*, of size *to_size* |
| 2568 |
* (same remark). An optional *seed* can be added to the value |
| 2569 |
* (this can be cascaded, the seed may come from a previous call |
| 2570 |
* to the helper). |
| 2571 |
* |
| 2572 |
* This is flexible enough to be used in several ways: |
| 2573 |
* |
| 2574 |
* * With *from_size* == 0, *to_size* > 0 and *seed* set to |
| 2575 |
* checksum, it can be used when pushing new data. |
| 2576 |
* * With *from_size* > 0, *to_size* == 0 and *seed* set to |
| 2577 |
* checksum, it can be used when removing data from a packet. |
| 2578 |
* * With *from_size* > 0, *to_size* > 0 and *seed* set to 0, it |
| 2579 |
* can be used to compute a diff. Note that *from_size* and |
| 2580 |
* *to_size* do not need to be equal. |
| 2581 |
* |
| 2582 |
* This helper can be used in combination with |
| 2583 |
* **bpf_l3_csum_replace**\ () and **bpf_l4_csum_replace**\ (), to |
| 2584 |
* which one can feed in the difference computed with |
| 2585 |
* **bpf_csum_diff**\ (). |
| 2586 |
* Return |
| 2587 |
* The checksum result, or a negative error code in case of |
| 2588 |
* failure. |
| 2589 |
* |
| 2590 |
* long bpf_skb_get_tunnel_opt(struct sk_buff *skb, void *opt, u32 size) |
| 2591 |
* Description |
| 2592 |
* Retrieve tunnel options metadata for the packet associated to |
| 2593 |
* *skb*, and store the raw tunnel option data to the buffer *opt* |
| 2594 |
* of *size*. |
| 2595 |
* |
| 2596 |
* This helper can be used with encapsulation devices that can |
| 2597 |
* operate in "collect metadata" mode (please refer to the related |
| 2598 |
* note in the description of **bpf_skb_get_tunnel_key**\ () for |
| 2599 |
* more details). A particular example where this can be used is |
| 2600 |
* in combination with the Geneve encapsulation protocol, where it |
| 2601 |
* allows for pushing (with **bpf_skb_get_tunnel_opt**\ () helper) |
| 2602 |
* and retrieving arbitrary TLVs (Type-Length-Value headers) from |
| 2603 |
* the eBPF program. This allows for full customization of these |
| 2604 |
* headers. |
| 2605 |
* Return |
| 2606 |
* The size of the option data retrieved. |
| 2607 |
* |
| 2608 |
* long bpf_skb_set_tunnel_opt(struct sk_buff *skb, void *opt, u32 size) |
| 2609 |
* Description |
| 2610 |
* Set tunnel options metadata for the packet associated to *skb* |
| 2611 |
* to the option data contained in the raw buffer *opt* of *size*. |
| 2612 |
* |
| 2613 |
* See also the description of the **bpf_skb_get_tunnel_opt**\ () |
| 2614 |
* helper for additional information. |
| 2615 |
* Return |
| 2616 |
* 0 on success, or a negative error in case of failure. |
| 2617 |
* |
| 2618 |
* long bpf_skb_change_proto(struct sk_buff *skb, __be16 proto, u64 flags) |
| 2619 |
* Description |
| 2620 |
* Change the protocol of the *skb* to *proto*. Currently |
| 2621 |
* supported are transition from IPv4 to IPv6, and from IPv6 to |
| 2622 |
* IPv4. The helper takes care of the groundwork for the |
| 2623 |
* transition, including resizing the socket buffer. The eBPF |
| 2624 |
* program is expected to fill the new headers, if any, via |
| 2625 |
* **skb_store_bytes**\ () and to recompute the checksums with |
| 2626 |
* **bpf_l3_csum_replace**\ () and **bpf_l4_csum_replace**\ |
| 2627 |
* (). The main case for this helper is to perform NAT64 |
| 2628 |
* operations out of an eBPF program. |
| 2629 |
* |
| 2630 |
* Internally, the GSO type is marked as dodgy so that headers are |
| 2631 |
* checked and segments are recalculated by the GSO/GRO engine. |
| 2632 |
* The size for GSO target is adapted as well. |
| 2633 |
* |
| 2634 |
* All values for *flags* are reserved for future usage, and must |
| 2635 |
* be left at zero. |
| 2636 |
* |
| 2637 |
* A call to this helper is susceptible to change the underlying |
| 2638 |
* packet buffer. Therefore, at load time, all checks on pointers |
| 2639 |
* previously done by the verifier are invalidated and must be |
| 2640 |
* performed again, if the helper is used in combination with |
| 2641 |
* direct packet access. |
| 2642 |
* Return |
| 2643 |
* 0 on success, or a negative error in case of failure. |
| 2644 |
* |
| 2645 |
* long bpf_skb_change_type(struct sk_buff *skb, u32 type) |
| 2646 |
* Description |
| 2647 |
* Change the packet type for the packet associated to *skb*. This |
| 2648 |
* comes down to setting *skb*\ **->pkt_type** to *type*, except |
| 2649 |
* the eBPF program does not have a write access to *skb*\ |
| 2650 |
* **->pkt_type** beside this helper. Using a helper here allows |
| 2651 |
* for graceful handling of errors. |
| 2652 |
* |
| 2653 |
* The major use case is to change incoming *skb*s to |
| 2654 |
* **PACKET_HOST** in a programmatic way instead of having to |
| 2655 |
* recirculate via **redirect**\ (..., **BPF_F_INGRESS**), for |
| 2656 |
* example. |
| 2657 |
* |
| 2658 |
* Note that *type* only allows certain values. At this time, they |
| 2659 |
* are: |
| 2660 |
* |
| 2661 |
* **PACKET_HOST** |
| 2662 |
* Packet is for us. |
| 2663 |
* **PACKET_BROADCAST** |
| 2664 |
* Send packet to all. |
| 2665 |
* **PACKET_MULTICAST** |
| 2666 |
* Send packet to group. |
| 2667 |
* **PACKET_OTHERHOST** |
| 2668 |
* Send packet to someone else. |
| 2669 |
* Return |
| 2670 |
* 0 on success, or a negative error in case of failure. |
| 2671 |
* |
| 2672 |
* long bpf_skb_under_cgroup(struct sk_buff *skb, struct bpf_map *map, u32 index) |
| 2673 |
* Description |
| 2674 |
* Check whether *skb* is a descendant of the cgroup2 held by |
| 2675 |
* *map* of type **BPF_MAP_TYPE_CGROUP_ARRAY**, at *index*. |
| 2676 |
* Return |
| 2677 |
* The return value depends on the result of the test, and can be: |
| 2678 |
* |
| 2679 |
* * 0, if the *skb* failed the cgroup2 descendant test. |
| 2680 |
* * 1, if the *skb* succeeded the cgroup2 descendant test. |
| 2681 |
* * A negative error code, if an error occurred. |
| 2682 |
* |
| 2683 |
* u32 bpf_get_hash_recalc(struct sk_buff *skb) |
| 2684 |
* Description |
| 2685 |
* Retrieve the hash of the packet, *skb*\ **->hash**. If it is |
| 2686 |
* not set, in particular if the hash was cleared due to mangling, |
| 2687 |
* recompute this hash. Later accesses to the hash can be done |
| 2688 |
* directly with *skb*\ **->hash**. |
| 2689 |
* |
| 2690 |
* Calling **bpf_set_hash_invalid**\ (), changing a packet |
| 2691 |
* prototype with **bpf_skb_change_proto**\ (), or calling |
| 2692 |
* **bpf_skb_store_bytes**\ () with the |
| 2693 |
* **BPF_F_INVALIDATE_HASH** are actions susceptible to clear |
| 2694 |
* the hash and to trigger a new computation for the next call to |
| 2695 |
* **bpf_get_hash_recalc**\ (). |
| 2696 |
* Return |
| 2697 |
* The 32-bit hash. |
| 2698 |
* |
| 2699 |
* u64 bpf_get_current_task(void) |
| 2700 |
* Description |
| 2701 |
* Get the current task. |
| 2702 |
* Return |
| 2703 |
* A pointer to the current task struct. |
| 2704 |
* |
| 2705 |
* long bpf_probe_write_user(void *dst, const void *src, u32 len) |
| 2706 |
* Description |
| 2707 |
* Attempt in a safe way to write *len* bytes from the buffer |
| 2708 |
* *src* to *dst* in memory. It only works for threads that are in |
| 2709 |
* user context, and *dst* must be a valid user space address. |
| 2710 |
* |
| 2711 |
* This helper should not be used to implement any kind of |
| 2712 |
* security mechanism because of TOC-TOU attacks, but rather to |
| 2713 |
* debug, divert, and manipulate execution of semi-cooperative |
| 2714 |
* processes. |
| 2715 |
* |
| 2716 |
* Keep in mind that this feature is meant for experiments, and it |
| 2717 |
* has a risk of crashing the system and running programs. |
| 2718 |
* Therefore, when an eBPF program using this helper is attached, |
| 2719 |
* a warning including PID and process name is printed to kernel |
| 2720 |
* logs. |
| 2721 |
* Return |
| 2722 |
* 0 on success, or a negative error in case of failure. |
| 2723 |
* |
| 2724 |
* long bpf_current_task_under_cgroup(struct bpf_map *map, u32 index) |
| 2725 |
* Description |
| 2726 |
* Check whether the probe is being run is the context of a given |
| 2727 |
* subset of the cgroup2 hierarchy. The cgroup2 to test is held by |
| 2728 |
* *map* of type **BPF_MAP_TYPE_CGROUP_ARRAY**, at *index*. |
| 2729 |
* Return |
| 2730 |
* The return value depends on the result of the test, and can be: |
| 2731 |
* |
| 2732 |
* * 1, if current task belongs to the cgroup2. |
| 2733 |
* * 0, if current task does not belong to the cgroup2. |
| 2734 |
* * A negative error code, if an error occurred. |
| 2735 |
* |
| 2736 |
* long bpf_skb_change_tail(struct sk_buff *skb, u32 len, u64 flags) |
| 2737 |
* Description |
| 2738 |
* Resize (trim or grow) the packet associated to *skb* to the |
| 2739 |
* new *len*. The *flags* are reserved for future usage, and must |
| 2740 |
* be left at zero. |
| 2741 |
* |
| 2742 |
* The basic idea is that the helper performs the needed work to |
| 2743 |
* change the size of the packet, then the eBPF program rewrites |
| 2744 |
* the rest via helpers like **bpf_skb_store_bytes**\ (), |
| 2745 |
* **bpf_l3_csum_replace**\ (), **bpf_l3_csum_replace**\ () |
| 2746 |
* and others. This helper is a slow path utility intended for |
| 2747 |
* replies with control messages. And because it is targeted for |
| 2748 |
* slow path, the helper itself can afford to be slow: it |
| 2749 |
* implicitly linearizes, unclones and drops offloads from the |
| 2750 |
* *skb*. |
| 2751 |
* |
| 2752 |
* A call to this helper is susceptible to change the underlying |
| 2753 |
* packet buffer. Therefore, at load time, all checks on pointers |
| 2754 |
* previously done by the verifier are invalidated and must be |
| 2755 |
* performed again, if the helper is used in combination with |
| 2756 |
* direct packet access. |
| 2757 |
* Return |
| 2758 |
* 0 on success, or a negative error in case of failure. |
| 2759 |
* |
| 2760 |
* long bpf_skb_pull_data(struct sk_buff *skb, u32 len) |
| 2761 |
* Description |
| 2762 |
* Pull in non-linear data in case the *skb* is non-linear and not |
| 2763 |
* all of *len* are part of the linear section. Make *len* bytes |
| 2764 |
* from *skb* readable and writable. If a zero value is passed for |
| 2765 |
* *len*, then all bytes in the linear part of *skb* will be made |
| 2766 |
* readable and writable. |
| 2767 |
* |
| 2768 |
* This helper is only needed for reading and writing with direct |
| 2769 |
* packet access. |
| 2770 |
* |
| 2771 |
* For direct packet access, testing that offsets to access |
| 2772 |
* are within packet boundaries (test on *skb*\ **->data_end**) is |
| 2773 |
* susceptible to fail if offsets are invalid, or if the requested |
| 2774 |
* data is in non-linear parts of the *skb*. On failure the |
| 2775 |
* program can just bail out, or in the case of a non-linear |
| 2776 |
* buffer, use a helper to make the data available. The |
| 2777 |
* **bpf_skb_load_bytes**\ () helper is a first solution to access |
| 2778 |
* the data. Another one consists in using **bpf_skb_pull_data** |
| 2779 |
* to pull in once the non-linear parts, then retesting and |
| 2780 |
* eventually access the data. |
| 2781 |
* |
| 2782 |
* At the same time, this also makes sure the *skb* is uncloned, |
| 2783 |
* which is a necessary condition for direct write. As this needs |
| 2784 |
* to be an invariant for the write part only, the verifier |
| 2785 |
* detects writes and adds a prologue that is calling |
| 2786 |
* **bpf_skb_pull_data()** to effectively unclone the *skb* from |
| 2787 |
* the very beginning in case it is indeed cloned. |
| 2788 |
* |
| 2789 |
* A call to this helper is susceptible to change the underlying |
| 2790 |
* packet buffer. Therefore, at load time, all checks on pointers |
| 2791 |
* previously done by the verifier are invalidated and must be |
| 2792 |
* performed again, if the helper is used in combination with |
| 2793 |
* direct packet access. |
| 2794 |
* Return |
| 2795 |
* 0 on success, or a negative error in case of failure. |
| 2796 |
* |
| 2797 |
* s64 bpf_csum_update(struct sk_buff *skb, __wsum csum) |
| 2798 |
* Description |
| 2799 |
* Add the checksum *csum* into *skb*\ **->csum** in case the |
| 2800 |
* driver has supplied a checksum for the entire packet into that |
| 2801 |
* field. Return an error otherwise. This helper is intended to be |
| 2802 |
* used in combination with **bpf_csum_diff**\ (), in particular |
| 2803 |
* when the checksum needs to be updated after data has been |
| 2804 |
* written into the packet through direct packet access. |
| 2805 |
* Return |
| 2806 |
* The checksum on success, or a negative error code in case of |
| 2807 |
* failure. |
| 2808 |
* |
| 2809 |
* void bpf_set_hash_invalid(struct sk_buff *skb) |
| 2810 |
* Description |
| 2811 |
* Invalidate the current *skb*\ **->hash**. It can be used after |
| 2812 |
* mangling on headers through direct packet access, in order to |
| 2813 |
* indicate that the hash is outdated and to trigger a |
| 2814 |
* recalculation the next time the kernel tries to access this |
| 2815 |
* hash or when the **bpf_get_hash_recalc**\ () helper is called. |
| 2816 |
* Return |
| 2817 |
* void. |
| 2818 |
* |
| 2819 |
* long bpf_get_numa_node_id(void) |
| 2820 |
* Description |
| 2821 |
* Return the id of the current NUMA node. The primary use case |
| 2822 |
* for this helper is the selection of sockets for the local NUMA |
| 2823 |
* node, when the program is attached to sockets using the |
| 2824 |
* **SO_ATTACH_REUSEPORT_EBPF** option (see also **socket(7)**), |
| 2825 |
* but the helper is also available to other eBPF program types, |
| 2826 |
* similarly to **bpf_get_smp_processor_id**\ (). |
| 2827 |
* Return |
| 2828 |
* The id of current NUMA node. |
| 2829 |
* |
| 2830 |
* long bpf_skb_change_head(struct sk_buff *skb, u32 len, u64 flags) |
| 2831 |
* Description |
| 2832 |
* Grows headroom of packet associated to *skb* and adjusts the |
| 2833 |
* offset of the MAC header accordingly, adding *len* bytes of |
| 2834 |
* space. It automatically extends and reallocates memory as |
| 2835 |
* required. |
| 2836 |
* |
| 2837 |
* This helper can be used on a layer 3 *skb* to push a MAC header |
| 2838 |
* for redirection into a layer 2 device. |
| 2839 |
* |
| 2840 |
* All values for *flags* are reserved for future usage, and must |
| 2841 |
* be left at zero. |
| 2842 |
* |
| 2843 |
* A call to this helper is susceptible to change the underlying |
| 2844 |
* packet buffer. Therefore, at load time, all checks on pointers |
| 2845 |
* previously done by the verifier are invalidated and must be |
| 2846 |
* performed again, if the helper is used in combination with |
| 2847 |
* direct packet access. |
| 2848 |
* Return |
| 2849 |
* 0 on success, or a negative error in case of failure. |
| 2850 |
* |
| 2851 |
* long bpf_xdp_adjust_head(struct xdp_buff *xdp_md, int delta) |
| 2852 |
* Description |
| 2853 |
* Adjust (move) *xdp_md*\ **->data** by *delta* bytes. Note that |
| 2854 |
* it is possible to use a negative value for *delta*. This helper |
| 2855 |
* can be used to prepare the packet for pushing or popping |
| 2856 |
* headers. |
| 2857 |
* |
| 2858 |
* A call to this helper is susceptible to change the underlying |
| 2859 |
* packet buffer. Therefore, at load time, all checks on pointers |
| 2860 |
* previously done by the verifier are invalidated and must be |
| 2861 |
* performed again, if the helper is used in combination with |
| 2862 |
* direct packet access. |
| 2863 |
* Return |
| 2864 |
* 0 on success, or a negative error in case of failure. |
| 2865 |
* |
| 2866 |
* long bpf_probe_read_str(void *dst, u32 size, const void *unsafe_ptr) |
| 2867 |
* Description |
| 2868 |
* Copy a NUL terminated string from an unsafe kernel address |
| 2869 |
* *unsafe_ptr* to *dst*. See **bpf_probe_read_kernel_str**\ () for |
| 2870 |
* more details. |
| 2871 |
* |
| 2872 |
* Generally, use **bpf_probe_read_user_str**\ () or |
| 2873 |
* **bpf_probe_read_kernel_str**\ () instead. |
| 2874 |
* Return |
| 2875 |
* On success, the strictly positive length of the string, |
| 2876 |
* including the trailing NUL character. On error, a negative |
| 2877 |
* value. |
| 2878 |
* |
| 2879 |
* u64 bpf_get_socket_cookie(struct sk_buff *skb) |
| 2880 |
* Description |
| 2881 |
* If the **struct sk_buff** pointed by *skb* has a known socket, |
| 2882 |
* retrieve the cookie (generated by the kernel) of this socket. |
| 2883 |
* If no cookie has been set yet, generate a new cookie. Once |
| 2884 |
* generated, the socket cookie remains stable for the life of the |
| 2885 |
* socket. This helper can be useful for monitoring per socket |
| 2886 |
* networking traffic statistics as it provides a global socket |
| 2887 |
* identifier that can be assumed unique. |
| 2888 |
* Return |
| 2889 |
* A 8-byte long unique number on success, or 0 if the socket |
| 2890 |
* field is missing inside *skb*. |
| 2891 |
* |
| 2892 |
* u64 bpf_get_socket_cookie(struct bpf_sock_addr *ctx) |
| 2893 |
* Description |
| 2894 |
* Equivalent to bpf_get_socket_cookie() helper that accepts |
| 2895 |
* *skb*, but gets socket from **struct bpf_sock_addr** context. |
| 2896 |
* Return |
| 2897 |
* A 8-byte long unique number. |
| 2898 |
* |
| 2899 |
* u64 bpf_get_socket_cookie(struct bpf_sock_ops *ctx) |
| 2900 |
* Description |
| 2901 |
* Equivalent to **bpf_get_socket_cookie**\ () helper that accepts |
| 2902 |
* *skb*, but gets socket from **struct bpf_sock_ops** context. |
| 2903 |
* Return |
| 2904 |
* A 8-byte long unique number. |
| 2905 |
* |
| 2906 |
* u64 bpf_get_socket_cookie(struct sock *sk) |
| 2907 |
* Description |
| 2908 |
* Equivalent to **bpf_get_socket_cookie**\ () helper that accepts |
| 2909 |
* *sk*, but gets socket from a BTF **struct sock**. This helper |
| 2910 |
* also works for sleepable programs. |
| 2911 |
* Return |
| 2912 |
* A 8-byte long unique number or 0 if *sk* is NULL. |
| 2913 |
* |
| 2914 |
* u32 bpf_get_socket_uid(struct sk_buff *skb) |
| 2915 |
* Description |
| 2916 |
* Get the owner UID of the socked associated to *skb*. |
| 2917 |
* Return |
| 2918 |
* The owner UID of the socket associated to *skb*. If the socket |
| 2919 |
* is **NULL**, or if it is not a full socket (i.e. if it is a |
| 2920 |
* time-wait or a request socket instead), **overflowuid** value |
| 2921 |
* is returned (note that **overflowuid** might also be the actual |
| 2922 |
* UID value for the socket). |
| 2923 |
* |
| 2924 |
* long bpf_set_hash(struct sk_buff *skb, u32 hash) |
| 2925 |
* Description |
| 2926 |
* Set the full hash for *skb* (set the field *skb*\ **->hash**) |
| 2927 |
* to value *hash*. |
| 2928 |
* Return |
| 2929 |
* 0 |
| 2930 |
* |
| 2931 |
* long bpf_setsockopt(void *bpf_socket, int level, int optname, void *optval, int optlen) |
| 2932 |
* Description |
| 2933 |
* Emulate a call to **setsockopt()** on the socket associated to |
| 2934 |
* *bpf_socket*, which must be a full socket. The *level* at |
| 2935 |
* which the option resides and the name *optname* of the option |
| 2936 |
* must be specified, see **setsockopt(2)** for more information. |
| 2937 |
* The option value of length *optlen* is pointed by *optval*. |
| 2938 |
* |
| 2939 |
* *bpf_socket* should be one of the following: |
| 2940 |
* |
| 2941 |
* * **struct bpf_sock_ops** for **BPF_PROG_TYPE_SOCK_OPS**. |
| 2942 |
* * **struct bpf_sock_addr** for **BPF_CGROUP_INET4_CONNECT**, |
| 2943 |
* **BPF_CGROUP_INET6_CONNECT** and **BPF_CGROUP_UNIX_CONNECT**. |
| 2944 |
* |
| 2945 |
* This helper actually implements a subset of **setsockopt()**. |
| 2946 |
* It supports the following *level*\ s: |
| 2947 |
* |
| 2948 |
* * **SOL_SOCKET**, which supports the following *optname*\ s: |
| 2949 |
* **SO_RCVBUF**, **SO_SNDBUF**, **SO_MAX_PACING_RATE**, |
| 2950 |
* **SO_PRIORITY**, **SO_RCVLOWAT**, **SO_MARK**, |
| 2951 |
* **SO_BINDTODEVICE**, **SO_KEEPALIVE**, **SO_REUSEADDR**, |
| 2952 |
* **SO_REUSEPORT**, **SO_BINDTOIFINDEX**, **SO_TXREHASH**. |
| 2953 |
* * **IPPROTO_TCP**, which supports the following *optname*\ s: |
| 2954 |
* **TCP_CONGESTION**, **TCP_BPF_IW**, |
| 2955 |
* **TCP_BPF_SNDCWND_CLAMP**, **TCP_SAVE_SYN**, |
| 2956 |
* **TCP_KEEPIDLE**, **TCP_KEEPINTVL**, **TCP_KEEPCNT**, |
| 2957 |
* **TCP_SYNCNT**, **TCP_USER_TIMEOUT**, **TCP_NOTSENT_LOWAT**, |
| 2958 |
* **TCP_NODELAY**, **TCP_MAXSEG**, **TCP_WINDOW_CLAMP**, |
| 2959 |
* **TCP_THIN_LINEAR_TIMEOUTS**, **TCP_BPF_DELACK_MAX**, |
| 2960 |
* **TCP_BPF_RTO_MIN**, **TCP_BPF_SOCK_OPS_CB_FLAGS**. |
| 2961 |
* * **IPPROTO_IP**, which supports *optname* **IP_TOS**. |
| 2962 |
* * **IPPROTO_IPV6**, which supports the following *optname*\ s: |
| 2963 |
* **IPV6_TCLASS**, **IPV6_AUTOFLOWLABEL**. |
| 2964 |
* Return |
| 2965 |
* 0 on success, or a negative error in case of failure. |
| 2966 |
* |
| 2967 |
* long bpf_skb_adjust_room(struct sk_buff *skb, s32 len_diff, u32 mode, u64 flags) |
| 2968 |
* Description |
| 2969 |
* Grow or shrink the room for data in the packet associated to |
| 2970 |
* *skb* by *len_diff*, and according to the selected *mode*. |
| 2971 |
* |
| 2972 |
* By default, the helper will reset any offloaded checksum |
| 2973 |
* indicator of the skb to CHECKSUM_NONE. This can be avoided |
| 2974 |
* by the following flag: |
| 2975 |
* |
| 2976 |
* * **BPF_F_ADJ_ROOM_NO_CSUM_RESET**: Do not reset offloaded |
| 2977 |
* checksum data of the skb to CHECKSUM_NONE. |
| 2978 |
* |
| 2979 |
* There are two supported modes at this time: |
| 2980 |
* |
| 2981 |
* * **BPF_ADJ_ROOM_MAC**: Adjust room at the mac layer |
| 2982 |
* (room space is added or removed between the layer 2 and |
| 2983 |
* layer 3 headers). |
| 2984 |
* |
| 2985 |
* * **BPF_ADJ_ROOM_NET**: Adjust room at the network layer |
| 2986 |
* (room space is added or removed between the layer 3 and |
| 2987 |
* layer 4 headers). |
| 2988 |
* |
| 2989 |
* The following flags are supported at this time: |
| 2990 |
* |
| 2991 |
* * **BPF_F_ADJ_ROOM_FIXED_GSO**: Do not adjust gso_size. |
| 2992 |
* Adjusting mss in this way is not allowed for datagrams. |
| 2993 |
* |
| 2994 |
* * **BPF_F_ADJ_ROOM_ENCAP_L3_IPV4**, |
| 2995 |
* **BPF_F_ADJ_ROOM_ENCAP_L3_IPV6**: |
| 2996 |
* Any new space is reserved to hold a tunnel header. |
| 2997 |
* Configure skb offsets and other fields accordingly. |
| 2998 |
* |
| 2999 |
* * **BPF_F_ADJ_ROOM_ENCAP_L4_GRE**, |
| 3000 |
* **BPF_F_ADJ_ROOM_ENCAP_L4_UDP**: |
| 3001 |
* Use with ENCAP_L3 flags to further specify the tunnel type. |
| 3002 |
* |
| 3003 |
* * **BPF_F_ADJ_ROOM_ENCAP_L2**\ (*len*): |
| 3004 |
* Use with ENCAP_L3/L4 flags to further specify the tunnel |
| 3005 |
* type; *len* is the length of the inner MAC header. |
| 3006 |
* |
| 3007 |
* * **BPF_F_ADJ_ROOM_ENCAP_L2_ETH**: |
| 3008 |
* Use with BPF_F_ADJ_ROOM_ENCAP_L2 flag to further specify the |
| 3009 |
* L2 type as Ethernet. |
| 3010 |
* |
| 3011 |
* * **BPF_F_ADJ_ROOM_DECAP_L3_IPV4**, |
| 3012 |
* **BPF_F_ADJ_ROOM_DECAP_L3_IPV6**: |
| 3013 |
* Indicate the new IP header version after decapsulating the outer |
| 3014 |
* IP header. Used when the inner and outer IP versions are different. |
| 3015 |
* |
| 3016 |
* A call to this helper is susceptible to change the underlying |
| 3017 |
* packet buffer. Therefore, at load time, all checks on pointers |
| 3018 |
* previously done by the verifier are invalidated and must be |
| 3019 |
* performed again, if the helper is used in combination with |
| 3020 |
* direct packet access. |
| 3021 |
* Return |
| 3022 |
* 0 on success, or a negative error in case of failure. |
| 3023 |
* |
| 3024 |
* long bpf_redirect_map(struct bpf_map *map, u64 key, u64 flags) |
| 3025 |
* Description |
| 3026 |
* Redirect the packet to the endpoint referenced by *map* at |
| 3027 |
* index *key*. Depending on its type, this *map* can contain |
| 3028 |
* references to net devices (for forwarding packets through other |
| 3029 |
* ports), or to CPUs (for redirecting XDP frames to another CPU; |
| 3030 |
* but this is only implemented for native XDP (with driver |
| 3031 |
* support) as of this writing). |
| 3032 |
* |
| 3033 |
* The lower two bits of *flags* are used as the return code if |
| 3034 |
* the map lookup fails. This is so that the return value can be |
| 3035 |
* one of the XDP program return codes up to **XDP_TX**, as chosen |
| 3036 |
* by the caller. The higher bits of *flags* can be set to |
| 3037 |
* BPF_F_BROADCAST or BPF_F_EXCLUDE_INGRESS as defined below. |
| 3038 |
* |
| 3039 |
* With BPF_F_BROADCAST the packet will be broadcasted to all the |
| 3040 |
* interfaces in the map, with BPF_F_EXCLUDE_INGRESS the ingress |
| 3041 |
* interface will be excluded when do broadcasting. |
| 3042 |
* |
| 3043 |
* See also **bpf_redirect**\ (), which only supports redirecting |
| 3044 |
* to an ifindex, but doesn't require a map to do so. |
| 3045 |
* Return |
| 3046 |
* **XDP_REDIRECT** on success, or the value of the two lower bits |
| 3047 |
* of the *flags* argument on error. |
| 3048 |
* |
| 3049 |
* long bpf_sk_redirect_map(struct sk_buff *skb, struct bpf_map *map, u32 key, u64 flags) |
| 3050 |
* Description |
| 3051 |
* Redirect the packet to the socket referenced by *map* (of type |
| 3052 |
* **BPF_MAP_TYPE_SOCKMAP**) at index *key*. Both ingress and |
| 3053 |
* egress interfaces can be used for redirection. The |
| 3054 |
* **BPF_F_INGRESS** value in *flags* is used to make the |
| 3055 |
* distinction (ingress path is selected if the flag is present, |
| 3056 |
* egress path otherwise). This is the only flag supported for now. |
| 3057 |
* Return |
| 3058 |
* **SK_PASS** on success, or **SK_DROP** on error. |
| 3059 |
* |
| 3060 |
* long bpf_sock_map_update(struct bpf_sock_ops *skops, struct bpf_map *map, void *key, u64 flags) |
| 3061 |
* Description |
| 3062 |
* Add an entry to, or update a *map* referencing sockets. The |
| 3063 |
* *skops* is used as a new value for the entry associated to |
| 3064 |
* *key*. *flags* is one of: |
| 3065 |
* |
| 3066 |
* **BPF_NOEXIST** |
| 3067 |
* The entry for *key* must not exist in the map. |
| 3068 |
* **BPF_EXIST** |
| 3069 |
* The entry for *key* must already exist in the map. |
| 3070 |
* **BPF_ANY** |
| 3071 |
* No condition on the existence of the entry for *key*. |
| 3072 |
* |
| 3073 |
* If the *map* has eBPF programs (parser and verdict), those will |
| 3074 |
* be inherited by the socket being added. If the socket is |
| 3075 |
* already attached to eBPF programs, this results in an error. |
| 3076 |
* Return |
| 3077 |
* 0 on success, or a negative error in case of failure. |
| 3078 |
* |
| 3079 |
* long bpf_xdp_adjust_meta(struct xdp_buff *xdp_md, int delta) |
| 3080 |
* Description |
| 3081 |
* Adjust the address pointed by *xdp_md*\ **->data_meta** by |
| 3082 |
* *delta* (which can be positive or negative). Note that this |
| 3083 |
* operation modifies the address stored in *xdp_md*\ **->data**, |
| 3084 |
* so the latter must be loaded only after the helper has been |
| 3085 |
* called. |
| 3086 |
* |
| 3087 |
* The use of *xdp_md*\ **->data_meta** is optional and programs |
| 3088 |
* are not required to use it. The rationale is that when the |
| 3089 |
* packet is processed with XDP (e.g. as DoS filter), it is |
| 3090 |
* possible to push further meta data along with it before passing |
| 3091 |
* to the stack, and to give the guarantee that an ingress eBPF |
| 3092 |
* program attached as a TC classifier on the same device can pick |
| 3093 |
* this up for further post-processing. Since TC works with socket |
| 3094 |
* buffers, it remains possible to set from XDP the **mark** or |
| 3095 |
* **priority** pointers, or other pointers for the socket buffer. |
| 3096 |
* Having this scratch space generic and programmable allows for |
| 3097 |
* more flexibility as the user is free to store whatever meta |
| 3098 |
* data they need. |
| 3099 |
* |
| 3100 |
* A call to this helper is susceptible to change the underlying |
| 3101 |
* packet buffer. Therefore, at load time, all checks on pointers |
| 3102 |
* previously done by the verifier are invalidated and must be |
| 3103 |
* performed again, if the helper is used in combination with |
| 3104 |
* direct packet access. |
| 3105 |
* Return |
| 3106 |
* 0 on success, or a negative error in case of failure. |
| 3107 |
* |
| 3108 |
* long bpf_perf_event_read_value(struct bpf_map *map, u64 flags, struct bpf_perf_event_value *buf, u32 buf_size) |
| 3109 |
* Description |
| 3110 |
* Read the value of a perf event counter, and store it into *buf* |
| 3111 |
* of size *buf_size*. This helper relies on a *map* of type |
| 3112 |
* **BPF_MAP_TYPE_PERF_EVENT_ARRAY**. The nature of the perf event |
| 3113 |
* counter is selected when *map* is updated with perf event file |
| 3114 |
* descriptors. The *map* is an array whose size is the number of |
| 3115 |
* available CPUs, and each cell contains a value relative to one |
| 3116 |
* CPU. The value to retrieve is indicated by *flags*, that |
| 3117 |
* contains the index of the CPU to look up, masked with |
| 3118 |
* **BPF_F_INDEX_MASK**. Alternatively, *flags* can be set to |
| 3119 |
* **BPF_F_CURRENT_CPU** to indicate that the value for the |
| 3120 |
* current CPU should be retrieved. |
| 3121 |
* |
| 3122 |
* This helper behaves in a way close to |
| 3123 |
* **bpf_perf_event_read**\ () helper, save that instead of |
| 3124 |
* just returning the value observed, it fills the *buf* |
| 3125 |
* structure. This allows for additional data to be retrieved: in |
| 3126 |
* particular, the enabled and running times (in *buf*\ |
| 3127 |
* **->enabled** and *buf*\ **->running**, respectively) are |
| 3128 |
* copied. In general, **bpf_perf_event_read_value**\ () is |
| 3129 |
* recommended over **bpf_perf_event_read**\ (), which has some |
| 3130 |
* ABI issues and provides fewer functionalities. |
| 3131 |
* |
| 3132 |
* These values are interesting, because hardware PMU (Performance |
| 3133 |
* Monitoring Unit) counters are limited resources. When there are |
| 3134 |
* more PMU based perf events opened than available counters, |
| 3135 |
* kernel will multiplex these events so each event gets certain |
| 3136 |
* percentage (but not all) of the PMU time. In case that |
| 3137 |
* multiplexing happens, the number of samples or counter value |
| 3138 |
* will not reflect the case compared to when no multiplexing |
| 3139 |
* occurs. This makes comparison between different runs difficult. |
| 3140 |
* Typically, the counter value should be normalized before |
| 3141 |
* comparing to other experiments. The usual normalization is done |
| 3142 |
* as follows. |
| 3143 |
* |
| 3144 |
* :: |
| 3145 |
* |
| 3146 |
* normalized_counter = counter * t_enabled / t_running |
| 3147 |
* |
| 3148 |
* Where t_enabled is the time enabled for event and t_running is |
| 3149 |
* the time running for event since last normalization. The |
| 3150 |
* enabled and running times are accumulated since the perf event |
| 3151 |
* open. To achieve scaling factor between two invocations of an |
| 3152 |
* eBPF program, users can use CPU id as the key (which is |
| 3153 |
* typical for perf array usage model) to remember the previous |
| 3154 |
* value and do the calculation inside the eBPF program. |
| 3155 |
* Return |
| 3156 |
* 0 on success, or a negative error in case of failure. |
| 3157 |
* |
| 3158 |
* long bpf_perf_prog_read_value(struct bpf_perf_event_data *ctx, struct bpf_perf_event_value *buf, u32 buf_size) |
| 3159 |
* Description |
| 3160 |
* For an eBPF program attached to a perf event, retrieve the |
| 3161 |
* value of the event counter associated to *ctx* and store it in |
| 3162 |
* the structure pointed by *buf* and of size *buf_size*. Enabled |
| 3163 |
* and running times are also stored in the structure (see |
| 3164 |
* description of helper **bpf_perf_event_read_value**\ () for |
| 3165 |
* more details). |
| 3166 |
* Return |
| 3167 |
* 0 on success, or a negative error in case of failure. |
| 3168 |
* |
| 3169 |
* long bpf_getsockopt(void *bpf_socket, int level, int optname, void *optval, int optlen) |
| 3170 |
* Description |
| 3171 |
* Emulate a call to **getsockopt()** on the socket associated to |
| 3172 |
* *bpf_socket*, which must be a full socket. The *level* at |
| 3173 |
* which the option resides and the name *optname* of the option |
| 3174 |
* must be specified, see **getsockopt(2)** for more information. |
| 3175 |
* The retrieved value is stored in the structure pointed by |
| 3176 |
* *opval* and of length *optlen*. |
| 3177 |
* |
| 3178 |
* *bpf_socket* should be one of the following: |
| 3179 |
* |
| 3180 |
* * **struct bpf_sock_ops** for **BPF_PROG_TYPE_SOCK_OPS**. |
| 3181 |
* * **struct bpf_sock_addr** for **BPF_CGROUP_INET4_CONNECT**, |
| 3182 |
* **BPF_CGROUP_INET6_CONNECT** and **BPF_CGROUP_UNIX_CONNECT**. |
| 3183 |
* |
| 3184 |
* This helper actually implements a subset of **getsockopt()**. |
| 3185 |
* It supports the same set of *optname*\ s that is supported by |
| 3186 |
* the **bpf_setsockopt**\ () helper. The exceptions are |
| 3187 |
* **TCP_BPF_*** is **bpf_setsockopt**\ () only and |
| 3188 |
* **TCP_SAVED_SYN** is **bpf_getsockopt**\ () only. |
| 3189 |
* Return |
| 3190 |
* 0 on success, or a negative error in case of failure. |
| 3191 |
* |
| 3192 |
* long bpf_override_return(struct pt_regs *regs, u64 rc) |
| 3193 |
* Description |
| 3194 |
* Used for error injection, this helper uses kprobes to override |
| 3195 |
* the return value of the probed function, and to set it to *rc*. |
| 3196 |
* The first argument is the context *regs* on which the kprobe |
| 3197 |
* works. |
| 3198 |
* |
| 3199 |
* This helper works by setting the PC (program counter) |
| 3200 |
* to an override function which is run in place of the original |
| 3201 |
* probed function. This means the probed function is not run at |
| 3202 |
* all. The replacement function just returns with the required |
| 3203 |
* value. |
| 3204 |
* |
| 3205 |
* This helper has security implications, and thus is subject to |
| 3206 |
* restrictions. It is only available if the kernel was compiled |
| 3207 |
* with the **CONFIG_BPF_KPROBE_OVERRIDE** configuration |
| 3208 |
* option, and in this case it only works on functions tagged with |
| 3209 |
* **ALLOW_ERROR_INJECTION** in the kernel code. |
| 3210 |
* Return |
| 3211 |
* 0 |
| 3212 |
* |
| 3213 |
* long bpf_sock_ops_cb_flags_set(struct bpf_sock_ops *bpf_sock, int argval) |
| 3214 |
* Description |
| 3215 |
* Attempt to set the value of the **bpf_sock_ops_cb_flags** field |
| 3216 |
* for the full TCP socket associated to *bpf_sock_ops* to |
| 3217 |
* *argval*. |
| 3218 |
* |
| 3219 |
* The primary use of this field is to determine if there should |
| 3220 |
* be calls to eBPF programs of type |
| 3221 |
* **BPF_PROG_TYPE_SOCK_OPS** at various points in the TCP |
| 3222 |
* code. A program of the same type can change its value, per |
| 3223 |
* connection and as necessary, when the connection is |
| 3224 |
* established. This field is directly accessible for reading, but |
| 3225 |
* this helper must be used for updates in order to return an |
| 3226 |
* error if an eBPF program tries to set a callback that is not |
| 3227 |
* supported in the current kernel. |
| 3228 |
* |
| 3229 |
* *argval* is a flag array which can combine these flags: |
| 3230 |
* |
| 3231 |
* * **BPF_SOCK_OPS_RTO_CB_FLAG** (retransmission time out) |
| 3232 |
* * **BPF_SOCK_OPS_RETRANS_CB_FLAG** (retransmission) |
| 3233 |
* * **BPF_SOCK_OPS_STATE_CB_FLAG** (TCP state change) |
| 3234 |
* * **BPF_SOCK_OPS_RTT_CB_FLAG** (every RTT) |
| 3235 |
* |
| 3236 |
* Therefore, this function can be used to clear a callback flag by |
| 3237 |
* setting the appropriate bit to zero. e.g. to disable the RTO |
| 3238 |
* callback: |
| 3239 |
* |
| 3240 |
* **bpf_sock_ops_cb_flags_set(bpf_sock,** |
| 3241 |
* **bpf_sock->bpf_sock_ops_cb_flags & ~BPF_SOCK_OPS_RTO_CB_FLAG)** |
| 3242 |
* |
| 3243 |
* Here are some examples of where one could call such eBPF |
| 3244 |
* program: |
| 3245 |
* |
| 3246 |
* * When RTO fires. |
| 3247 |
* * When a packet is retransmitted. |
| 3248 |
* * When the connection terminates. |
| 3249 |
* * When a packet is sent. |
| 3250 |
* * When a packet is received. |
| 3251 |
* Return |
| 3252 |
* Code **-EINVAL** if the socket is not a full TCP socket; |
| 3253 |
* otherwise, a positive number containing the bits that could not |
| 3254 |
* be set is returned (which comes down to 0 if all bits were set |
| 3255 |
* as required). |
| 3256 |
* |
| 3257 |
* long bpf_msg_redirect_map(struct sk_msg_buff *msg, struct bpf_map *map, u32 key, u64 flags) |
| 3258 |
* Description |
| 3259 |
* This helper is used in programs implementing policies at the |
| 3260 |
* socket level. If the message *msg* is allowed to pass (i.e. if |
| 3261 |
* the verdict eBPF program returns **SK_PASS**), redirect it to |
| 3262 |
* the socket referenced by *map* (of type |
| 3263 |
* **BPF_MAP_TYPE_SOCKMAP**) at index *key*. Both ingress and |
| 3264 |
* egress interfaces can be used for redirection. The |
| 3265 |
* **BPF_F_INGRESS** value in *flags* is used to make the |
| 3266 |
* distinction (ingress path is selected if the flag is present, |
| 3267 |
* egress path otherwise). This is the only flag supported for now. |
| 3268 |
* Return |
| 3269 |
* **SK_PASS** on success, or **SK_DROP** on error. |
| 3270 |
* |
| 3271 |
* long bpf_msg_apply_bytes(struct sk_msg_buff *msg, u32 bytes) |
| 3272 |
* Description |
| 3273 |
* For socket policies, apply the verdict of the eBPF program to |
| 3274 |
* the next *bytes* (number of bytes) of message *msg*. |
| 3275 |
* |
| 3276 |
* For example, this helper can be used in the following cases: |
| 3277 |
* |
| 3278 |
* * A single **sendmsg**\ () or **sendfile**\ () system call |
| 3279 |
* contains multiple logical messages that the eBPF program is |
| 3280 |
* supposed to read and for which it should apply a verdict. |
| 3281 |
* * An eBPF program only cares to read the first *bytes* of a |
| 3282 |
* *msg*. If the message has a large payload, then setting up |
| 3283 |
* and calling the eBPF program repeatedly for all bytes, even |
| 3284 |
* though the verdict is already known, would create unnecessary |
| 3285 |
* overhead. |
| 3286 |
* |
| 3287 |
* When called from within an eBPF program, the helper sets a |
| 3288 |
* counter internal to the BPF infrastructure, that is used to |
| 3289 |
* apply the last verdict to the next *bytes*. If *bytes* is |
| 3290 |
* smaller than the current data being processed from a |
| 3291 |
* **sendmsg**\ () or **sendfile**\ () system call, the first |
| 3292 |
* *bytes* will be sent and the eBPF program will be re-run with |
| 3293 |
* the pointer for start of data pointing to byte number *bytes* |
| 3294 |
* **+ 1**. If *bytes* is larger than the current data being |
| 3295 |
* processed, then the eBPF verdict will be applied to multiple |
| 3296 |
* **sendmsg**\ () or **sendfile**\ () calls until *bytes* are |
| 3297 |
* consumed. |
| 3298 |
* |
| 3299 |
* Note that if a socket closes with the internal counter holding |
| 3300 |
* a non-zero value, this is not a problem because data is not |
| 3301 |
* being buffered for *bytes* and is sent as it is received. |
| 3302 |
* Return |
| 3303 |
* 0 |
| 3304 |
* |
| 3305 |
* long bpf_msg_cork_bytes(struct sk_msg_buff *msg, u32 bytes) |
| 3306 |
* Description |
| 3307 |
* For socket policies, prevent the execution of the verdict eBPF |
| 3308 |
* program for message *msg* until *bytes* (byte number) have been |
| 3309 |
* accumulated. |
| 3310 |
* |
| 3311 |
* This can be used when one needs a specific number of bytes |
| 3312 |
* before a verdict can be assigned, even if the data spans |
| 3313 |
* multiple **sendmsg**\ () or **sendfile**\ () calls. The extreme |
| 3314 |
* case would be a user calling **sendmsg**\ () repeatedly with |
| 3315 |
* 1-byte long message segments. Obviously, this is bad for |
| 3316 |
* performance, but it is still valid. If the eBPF program needs |
| 3317 |
* *bytes* bytes to validate a header, this helper can be used to |
| 3318 |
* prevent the eBPF program to be called again until *bytes* have |
| 3319 |
* been accumulated. |
| 3320 |
* Return |
| 3321 |
* 0 |
| 3322 |
* |
| 3323 |
* long bpf_msg_pull_data(struct sk_msg_buff *msg, u32 start, u32 end, u64 flags) |
| 3324 |
* Description |
| 3325 |
* For socket policies, pull in non-linear data from user space |
| 3326 |
* for *msg* and set pointers *msg*\ **->data** and *msg*\ |
| 3327 |
* **->data_end** to *start* and *end* bytes offsets into *msg*, |
| 3328 |
* respectively. |
| 3329 |
* |
| 3330 |
* If a program of type **BPF_PROG_TYPE_SK_MSG** is run on a |
| 3331 |
* *msg* it can only parse data that the (**data**, **data_end**) |
| 3332 |
* pointers have already consumed. For **sendmsg**\ () hooks this |
| 3333 |
* is likely the first scatterlist element. But for calls relying |
| 3334 |
* on the **sendpage** handler (e.g. **sendfile**\ ()) this will |
| 3335 |
* be the range (**0**, **0**) because the data is shared with |
| 3336 |
* user space and by default the objective is to avoid allowing |
| 3337 |
* user space to modify data while (or after) eBPF verdict is |
| 3338 |
* being decided. This helper can be used to pull in data and to |
| 3339 |
* set the start and end pointer to given values. Data will be |
| 3340 |
* copied if necessary (i.e. if data was not linear and if start |
| 3341 |
* and end pointers do not point to the same chunk). |
| 3342 |
* |
| 3343 |
* A call to this helper is susceptible to change the underlying |
| 3344 |
* packet buffer. Therefore, at load time, all checks on pointers |
| 3345 |
* previously done by the verifier are invalidated and must be |
| 3346 |
* performed again, if the helper is used in combination with |
| 3347 |
* direct packet access. |
| 3348 |
* |
| 3349 |
* All values for *flags* are reserved for future usage, and must |
| 3350 |
* be left at zero. |
| 3351 |
* Return |
| 3352 |
* 0 on success, or a negative error in case of failure. |
| 3353 |
* |
| 3354 |
* long bpf_bind(struct bpf_sock_addr *ctx, struct sockaddr *addr, int addr_len) |
| 3355 |
* Description |
| 3356 |
* Bind the socket associated to *ctx* to the address pointed by |
| 3357 |
* *addr*, of length *addr_len*. This allows for making outgoing |
| 3358 |
* connection from the desired IP address, which can be useful for |
| 3359 |
* example when all processes inside a cgroup should use one |
| 3360 |
* single IP address on a host that has multiple IP configured. |
| 3361 |
* |
| 3362 |
* This helper works for IPv4 and IPv6, TCP and UDP sockets. The |
| 3363 |
* domain (*addr*\ **->sa_family**) must be **AF_INET** (or |
| 3364 |
* **AF_INET6**). It's advised to pass zero port (**sin_port** |
| 3365 |
* or **sin6_port**) which triggers IP_BIND_ADDRESS_NO_PORT-like |
| 3366 |
* behavior and lets the kernel efficiently pick up an unused |
| 3367 |
* port as long as 4-tuple is unique. Passing non-zero port might |
| 3368 |
* lead to degraded performance. |
| 3369 |
* Return |
| 3370 |
* 0 on success, or a negative error in case of failure. |
| 3371 |
* |
| 3372 |
* long bpf_xdp_adjust_tail(struct xdp_buff *xdp_md, int delta) |
| 3373 |
* Description |
| 3374 |
* Adjust (move) *xdp_md*\ **->data_end** by *delta* bytes. It is |
| 3375 |
* possible to both shrink and grow the packet tail. |
| 3376 |
* Shrink done via *delta* being a negative integer. |
| 3377 |
* |
| 3378 |
* A call to this helper is susceptible to change the underlying |
| 3379 |
* packet buffer. Therefore, at load time, all checks on pointers |
| 3380 |
* previously done by the verifier are invalidated and must be |
| 3381 |
* performed again, if the helper is used in combination with |
| 3382 |
* direct packet access. |
| 3383 |
* Return |
| 3384 |
* 0 on success, or a negative error in case of failure. |
| 3385 |
* |
| 3386 |
* long bpf_skb_get_xfrm_state(struct sk_buff *skb, u32 index, struct bpf_xfrm_state *xfrm_state, u32 size, u64 flags) |
| 3387 |
* Description |
| 3388 |
* Retrieve the XFRM state (IP transform framework, see also |
| 3389 |
* **ip-xfrm(8)**) at *index* in XFRM "security path" for *skb*. |
| 3390 |
* |
| 3391 |
* The retrieved value is stored in the **struct bpf_xfrm_state** |
| 3392 |
* pointed by *xfrm_state* and of length *size*. |
| 3393 |
* |
| 3394 |
* All values for *flags* are reserved for future usage, and must |
| 3395 |
* be left at zero. |
| 3396 |
* |
| 3397 |
* This helper is available only if the kernel was compiled with |
| 3398 |
* **CONFIG_XFRM** configuration option. |
| 3399 |
* Return |
| 3400 |
* 0 on success, or a negative error in case of failure. |
| 3401 |
* |
| 3402 |
* long bpf_get_stack(void *ctx, void *buf, u32 size, u64 flags) |
| 3403 |
* Description |
| 3404 |
* Return a user or a kernel stack in bpf program provided buffer. |
| 3405 |
* To achieve this, the helper needs *ctx*, which is a pointer |
| 3406 |
* to the context on which the tracing program is executed. |
| 3407 |
* To store the stacktrace, the bpf program provides *buf* with |
| 3408 |
* a nonnegative *size*. |
| 3409 |
* |
| 3410 |
* The last argument, *flags*, holds the number of stack frames to |
| 3411 |
* skip (from 0 to 255), masked with |
| 3412 |
* **BPF_F_SKIP_FIELD_MASK**. The next bits can be used to set |
| 3413 |
* the following flags: |
| 3414 |
* |
| 3415 |
* **BPF_F_USER_STACK** |
| 3416 |
* Collect a user space stack instead of a kernel stack. |
| 3417 |
* **BPF_F_USER_BUILD_ID** |
| 3418 |
* Collect (build_id, file_offset) instead of ips for user |
| 3419 |
* stack, only valid if **BPF_F_USER_STACK** is also |
| 3420 |
* specified. |
| 3421 |
* |
| 3422 |
* *file_offset* is an offset relative to the beginning |
| 3423 |
* of the executable or shared object file backing the vma |
| 3424 |
* which the *ip* falls in. It is *not* an offset relative |
| 3425 |
* to that object's base address. Accordingly, it must be |
| 3426 |
* adjusted by adding (sh_addr - sh_offset), where |
| 3427 |
* sh_{addr,offset} correspond to the executable section |
| 3428 |
* containing *file_offset* in the object, for comparisons |
| 3429 |
* to symbols' st_value to be valid. |
| 3430 |
* |
| 3431 |
* **bpf_get_stack**\ () can collect up to |
| 3432 |
* **PERF_MAX_STACK_DEPTH** both kernel and user frames, subject |
| 3433 |
* to sufficient large buffer size. Note that |
| 3434 |
* this limit can be controlled with the **sysctl** program, and |
| 3435 |
* that it should be manually increased in order to profile long |
| 3436 |
* user stacks (such as stacks for Java programs). To do so, use: |
| 3437 |
* |
| 3438 |
* :: |
| 3439 |
* |
| 3440 |
* # sysctl kernel.perf_event_max_stack=<new value> |
| 3441 |
* Return |
| 3442 |
* The non-negative copied *buf* length equal to or less than |
| 3443 |
* *size* on success, or a negative error in case of failure. |
| 3444 |
* |
| 3445 |
* long bpf_skb_load_bytes_relative(const void *skb, u32 offset, void *to, u32 len, u32 start_header) |
| 3446 |
* Description |
| 3447 |
* This helper is similar to **bpf_skb_load_bytes**\ () in that |
| 3448 |
* it provides an easy way to load *len* bytes from *offset* |
| 3449 |
* from the packet associated to *skb*, into the buffer pointed |
| 3450 |
* by *to*. The difference to **bpf_skb_load_bytes**\ () is that |
| 3451 |
* a fifth argument *start_header* exists in order to select a |
| 3452 |
* base offset to start from. *start_header* can be one of: |
| 3453 |
* |
| 3454 |
* **BPF_HDR_START_MAC** |
| 3455 |
* Base offset to load data from is *skb*'s mac header. |
| 3456 |
* **BPF_HDR_START_NET** |
| 3457 |
* Base offset to load data from is *skb*'s network header. |
| 3458 |
* |
| 3459 |
* In general, "direct packet access" is the preferred method to |
| 3460 |
* access packet data, however, this helper is in particular useful |
| 3461 |
* in socket filters where *skb*\ **->data** does not always point |
| 3462 |
* to the start of the mac header and where "direct packet access" |
| 3463 |
* is not available. |
| 3464 |
* Return |
| 3465 |
* 0 on success, or a negative error in case of failure. |
| 3466 |
* |
| 3467 |
* long bpf_fib_lookup(void *ctx, struct bpf_fib_lookup *params, int plen, u32 flags) |
| 3468 |
* Description |
| 3469 |
* Do FIB lookup in kernel tables using parameters in *params*. |
| 3470 |
* If lookup is successful and result shows packet is to be |
| 3471 |
* forwarded, the neighbor tables are searched for the nexthop. |
| 3472 |
* If successful (ie., FIB lookup shows forwarding and nexthop |
| 3473 |
* is resolved), the nexthop address is returned in ipv4_dst |
| 3474 |
* or ipv6_dst based on family, smac is set to mac address of |
| 3475 |
* egress device, dmac is set to nexthop mac address, rt_metric |
| 3476 |
* is set to metric from route (IPv4/IPv6 only), and ifindex |
| 3477 |
* is set to the device index of the nexthop from the FIB lookup. |
| 3478 |
* |
| 3479 |
* *plen* argument is the size of the passed in struct. |
| 3480 |
* *flags* argument can be a combination of one or more of the |
| 3481 |
* following values: |
| 3482 |
* |
| 3483 |
* **BPF_FIB_LOOKUP_DIRECT** |
| 3484 |
* Do a direct table lookup vs full lookup using FIB |
| 3485 |
* rules. |
| 3486 |
* **BPF_FIB_LOOKUP_TBID** |
| 3487 |
* Used with BPF_FIB_LOOKUP_DIRECT. |
| 3488 |
* Use the routing table ID present in *params*->tbid |
| 3489 |
* for the fib lookup. |
| 3490 |
* **BPF_FIB_LOOKUP_OUTPUT** |
| 3491 |
* Perform lookup from an egress perspective (default is |
| 3492 |
* ingress). |
| 3493 |
* **BPF_FIB_LOOKUP_SKIP_NEIGH** |
| 3494 |
* Skip the neighbour table lookup. *params*->dmac |
| 3495 |
* and *params*->smac will not be set as output. A common |
| 3496 |
* use case is to call **bpf_redirect_neigh**\ () after |
| 3497 |
* doing **bpf_fib_lookup**\ (). |
| 3498 |
* **BPF_FIB_LOOKUP_SRC** |
| 3499 |
* Derive and set source IP addr in *params*->ipv{4,6}_src |
| 3500 |
* for the nexthop. If the src addr cannot be derived, |
| 3501 |
* **BPF_FIB_LKUP_RET_NO_SRC_ADDR** is returned. In this |
| 3502 |
* case, *params*->dmac and *params*->smac are not set either. |
| 3503 |
* **BPF_FIB_LOOKUP_MARK** |
| 3504 |
* Use the mark present in *params*->mark for the fib lookup. |
| 3505 |
* This option should not be used with BPF_FIB_LOOKUP_DIRECT, |
| 3506 |
* as it only has meaning for full lookups. |
| 3507 |
* |
| 3508 |
* *ctx* is either **struct xdp_md** for XDP programs or |
| 3509 |
* **struct sk_buff** tc cls_act programs. |
| 3510 |
* Return |
| 3511 |
* * < 0 if any input argument is invalid |
| 3512 |
* * 0 on success (packet is forwarded, nexthop neighbor exists) |
| 3513 |
* * > 0 one of **BPF_FIB_LKUP_RET_** codes explaining why the |
| 3514 |
* packet is not forwarded or needs assist from full stack |
| 3515 |
* |
| 3516 |
* If lookup fails with BPF_FIB_LKUP_RET_FRAG_NEEDED, then the MTU |
| 3517 |
* was exceeded and output params->mtu_result contains the MTU. |
| 3518 |
* |
| 3519 |
* long bpf_sock_hash_update(struct bpf_sock_ops *skops, struct bpf_map *map, void *key, u64 flags) |
| 3520 |
* Description |
| 3521 |
* Add an entry to, or update a sockhash *map* referencing sockets. |
| 3522 |
* The *skops* is used as a new value for the entry associated to |
| 3523 |
* *key*. *flags* is one of: |
| 3524 |
* |
| 3525 |
* **BPF_NOEXIST** |
| 3526 |
* The entry for *key* must not exist in the map. |
| 3527 |
* **BPF_EXIST** |
| 3528 |
* The entry for *key* must already exist in the map. |
| 3529 |
* **BPF_ANY** |
| 3530 |
* No condition on the existence of the entry for *key*. |
| 3531 |
* |
| 3532 |
* If the *map* has eBPF programs (parser and verdict), those will |
| 3533 |
* be inherited by the socket being added. If the socket is |
| 3534 |
* already attached to eBPF programs, this results in an error. |
| 3535 |
* Return |
| 3536 |
* 0 on success, or a negative error in case of failure. |
| 3537 |
* |
| 3538 |
* long bpf_msg_redirect_hash(struct sk_msg_buff *msg, struct bpf_map *map, void *key, u64 flags) |
| 3539 |
* Description |
| 3540 |
* This helper is used in programs implementing policies at the |
| 3541 |
* socket level. If the message *msg* is allowed to pass (i.e. if |
| 3542 |
* the verdict eBPF program returns **SK_PASS**), redirect it to |
| 3543 |
* the socket referenced by *map* (of type |
| 3544 |
* **BPF_MAP_TYPE_SOCKHASH**) using hash *key*. Both ingress and |
| 3545 |
* egress interfaces can be used for redirection. The |
| 3546 |
* **BPF_F_INGRESS** value in *flags* is used to make the |
| 3547 |
* distinction (ingress path is selected if the flag is present, |
| 3548 |
* egress path otherwise). This is the only flag supported for now. |
| 3549 |
* Return |
| 3550 |
* **SK_PASS** on success, or **SK_DROP** on error. |
| 3551 |
* |
| 3552 |
* long bpf_sk_redirect_hash(struct sk_buff *skb, struct bpf_map *map, void *key, u64 flags) |
| 3553 |
* Description |
| 3554 |
* This helper is used in programs implementing policies at the |
| 3555 |
* skb socket level. If the sk_buff *skb* is allowed to pass (i.e. |
| 3556 |
* if the verdict eBPF program returns **SK_PASS**), redirect it |
| 3557 |
* to the socket referenced by *map* (of type |
| 3558 |
* **BPF_MAP_TYPE_SOCKHASH**) using hash *key*. Both ingress and |
| 3559 |
* egress interfaces can be used for redirection. The |
| 3560 |
* **BPF_F_INGRESS** value in *flags* is used to make the |
| 3561 |
* distinction (ingress path is selected if the flag is present, |
| 3562 |
* egress otherwise). This is the only flag supported for now. |
| 3563 |
* Return |
| 3564 |
* **SK_PASS** on success, or **SK_DROP** on error. |
| 3565 |
* |
| 3566 |
* long bpf_lwt_push_encap(struct sk_buff *skb, u32 type, void *hdr, u32 len) |
| 3567 |
* Description |
| 3568 |
* Encapsulate the packet associated to *skb* within a Layer 3 |
| 3569 |
* protocol header. This header is provided in the buffer at |
| 3570 |
* address *hdr*, with *len* its size in bytes. *type* indicates |
| 3571 |
* the protocol of the header and can be one of: |
| 3572 |
* |
| 3573 |
* **BPF_LWT_ENCAP_SEG6** |
| 3574 |
* IPv6 encapsulation with Segment Routing Header |
| 3575 |
* (**struct ipv6_sr_hdr**). *hdr* only contains the SRH, |
| 3576 |
* the IPv6 header is computed by the kernel. |
| 3577 |
* **BPF_LWT_ENCAP_SEG6_INLINE** |
| 3578 |
* Only works if *skb* contains an IPv6 packet. Insert a |
| 3579 |
* Segment Routing Header (**struct ipv6_sr_hdr**) inside |
| 3580 |
* the IPv6 header. |
| 3581 |
* **BPF_LWT_ENCAP_IP** |
| 3582 |
* IP encapsulation (GRE/GUE/IPIP/etc). The outer header |
| 3583 |
* must be IPv4 or IPv6, followed by zero or more |
| 3584 |
* additional headers, up to **LWT_BPF_MAX_HEADROOM** |
| 3585 |
* total bytes in all prepended headers. Please note that |
| 3586 |
* if **skb_is_gso**\ (*skb*) is true, no more than two |
| 3587 |
* headers can be prepended, and the inner header, if |
| 3588 |
* present, should be either GRE or UDP/GUE. |
| 3589 |
* |
| 3590 |
* **BPF_LWT_ENCAP_SEG6**\ \* types can be called by BPF programs |
| 3591 |
* of type **BPF_PROG_TYPE_LWT_IN**; **BPF_LWT_ENCAP_IP** type can |
| 3592 |
* be called by bpf programs of types **BPF_PROG_TYPE_LWT_IN** and |
| 3593 |
* **BPF_PROG_TYPE_LWT_XMIT**. |
| 3594 |
* |
| 3595 |
* A call to this helper is susceptible to change the underlying |
| 3596 |
* packet buffer. Therefore, at load time, all checks on pointers |
| 3597 |
* previously done by the verifier are invalidated and must be |
| 3598 |
* performed again, if the helper is used in combination with |
| 3599 |
* direct packet access. |
| 3600 |
* Return |
| 3601 |
* 0 on success, or a negative error in case of failure. |
| 3602 |
* |
| 3603 |
* long bpf_lwt_seg6_store_bytes(struct sk_buff *skb, u32 offset, const void *from, u32 len) |
| 3604 |
* Description |
| 3605 |
* Store *len* bytes from address *from* into the packet |
| 3606 |
* associated to *skb*, at *offset*. Only the flags, tag and TLVs |
| 3607 |
* inside the outermost IPv6 Segment Routing Header can be |
| 3608 |
* modified through this helper. |
| 3609 |
* |
| 3610 |
* A call to this helper is susceptible to change the underlying |
| 3611 |
* packet buffer. Therefore, at load time, all checks on pointers |
| 3612 |
* previously done by the verifier are invalidated and must be |
| 3613 |
* performed again, if the helper is used in combination with |
| 3614 |
* direct packet access. |
| 3615 |
* Return |
| 3616 |
* 0 on success, or a negative error in case of failure. |
| 3617 |
* |
| 3618 |
* long bpf_lwt_seg6_adjust_srh(struct sk_buff *skb, u32 offset, s32 delta) |
| 3619 |
* Description |
| 3620 |
* Adjust the size allocated to TLVs in the outermost IPv6 |
| 3621 |
* Segment Routing Header contained in the packet associated to |
| 3622 |
* *skb*, at position *offset* by *delta* bytes. Only offsets |
| 3623 |
* after the segments are accepted. *delta* can be as well |
| 3624 |
* positive (growing) as negative (shrinking). |
| 3625 |
* |
| 3626 |
* A call to this helper is susceptible to change the underlying |
| 3627 |
* packet buffer. Therefore, at load time, all checks on pointers |
| 3628 |
* previously done by the verifier are invalidated and must be |
| 3629 |
* performed again, if the helper is used in combination with |
| 3630 |
* direct packet access. |
| 3631 |
* Return |
| 3632 |
* 0 on success, or a negative error in case of failure. |
| 3633 |
* |
| 3634 |
* long bpf_lwt_seg6_action(struct sk_buff *skb, u32 action, void *param, u32 param_len) |
| 3635 |
* Description |
| 3636 |
* Apply an IPv6 Segment Routing action of type *action* to the |
| 3637 |
* packet associated to *skb*. Each action takes a parameter |
| 3638 |
* contained at address *param*, and of length *param_len* bytes. |
| 3639 |
* *action* can be one of: |
| 3640 |
* |
| 3641 |
* **SEG6_LOCAL_ACTION_END_X** |
| 3642 |
* End.X action: Endpoint with Layer-3 cross-connect. |
| 3643 |
* Type of *param*: **struct in6_addr**. |
| 3644 |
* **SEG6_LOCAL_ACTION_END_T** |
| 3645 |
* End.T action: Endpoint with specific IPv6 table lookup. |
| 3646 |
* Type of *param*: **int**. |
| 3647 |
* **SEG6_LOCAL_ACTION_END_B6** |
| 3648 |
* End.B6 action: Endpoint bound to an SRv6 policy. |
| 3649 |
* Type of *param*: **struct ipv6_sr_hdr**. |
| 3650 |
* **SEG6_LOCAL_ACTION_END_B6_ENCAP** |
| 3651 |
* End.B6.Encap action: Endpoint bound to an SRv6 |
| 3652 |
* encapsulation policy. |
| 3653 |
* Type of *param*: **struct ipv6_sr_hdr**. |
| 3654 |
* |
| 3655 |
* A call to this helper is susceptible to change the underlying |
| 3656 |
* packet buffer. Therefore, at load time, all checks on pointers |
| 3657 |
* previously done by the verifier are invalidated and must be |
| 3658 |
* performed again, if the helper is used in combination with |
| 3659 |
* direct packet access. |
| 3660 |
* Return |
| 3661 |
* 0 on success, or a negative error in case of failure. |
| 3662 |
* |
| 3663 |
* long bpf_rc_repeat(void *ctx) |
| 3664 |
* Description |
| 3665 |
* This helper is used in programs implementing IR decoding, to |
| 3666 |
* report a successfully decoded repeat key message. This delays |
| 3667 |
* the generation of a key up event for previously generated |
| 3668 |
* key down event. |
| 3669 |
* |
| 3670 |
* Some IR protocols like NEC have a special IR message for |
| 3671 |
* repeating last button, for when a button is held down. |
| 3672 |
* |
| 3673 |
* The *ctx* should point to the lirc sample as passed into |
| 3674 |
* the program. |
| 3675 |
* |
| 3676 |
* This helper is only available is the kernel was compiled with |
| 3677 |
* the **CONFIG_BPF_LIRC_MODE2** configuration option set to |
| 3678 |
* "**y**". |
| 3679 |
* Return |
| 3680 |
* 0 |
| 3681 |
* |
| 3682 |
* long bpf_rc_keydown(void *ctx, u32 protocol, u64 scancode, u32 toggle) |
| 3683 |
* Description |
| 3684 |
* This helper is used in programs implementing IR decoding, to |
| 3685 |
* report a successfully decoded key press with *scancode*, |
| 3686 |
* *toggle* value in the given *protocol*. The scancode will be |
| 3687 |
* translated to a keycode using the rc keymap, and reported as |
| 3688 |
* an input key down event. After a period a key up event is |
| 3689 |
* generated. This period can be extended by calling either |
| 3690 |
* **bpf_rc_keydown**\ () again with the same values, or calling |
| 3691 |
* **bpf_rc_repeat**\ (). |
| 3692 |
* |
| 3693 |
* Some protocols include a toggle bit, in case the button was |
| 3694 |
* released and pressed again between consecutive scancodes. |
| 3695 |
* |
| 3696 |
* The *ctx* should point to the lirc sample as passed into |
| 3697 |
* the program. |
| 3698 |
* |
| 3699 |
* The *protocol* is the decoded protocol number (see |
| 3700 |
* **enum rc_proto** for some predefined values). |
| 3701 |
* |
| 3702 |
* This helper is only available is the kernel was compiled with |
| 3703 |
* the **CONFIG_BPF_LIRC_MODE2** configuration option set to |
| 3704 |
* "**y**". |
| 3705 |
* Return |
| 3706 |
* 0 |
| 3707 |
* |
| 3708 |
* u64 bpf_skb_cgroup_id(struct sk_buff *skb) |
| 3709 |
* Description |
| 3710 |
* Return the cgroup v2 id of the socket associated with the *skb*. |
| 3711 |
* This is roughly similar to the **bpf_get_cgroup_classid**\ () |
| 3712 |
* helper for cgroup v1 by providing a tag resp. identifier that |
| 3713 |
* can be matched on or used for map lookups e.g. to implement |
| 3714 |
* policy. The cgroup v2 id of a given path in the hierarchy is |
| 3715 |
* exposed in user space through the f_handle API in order to get |
| 3716 |
* to the same 64-bit id. |
| 3717 |
* |
| 3718 |
* This helper can be used on TC egress path, but not on ingress, |
| 3719 |
* and is available only if the kernel was compiled with the |
| 3720 |
* **CONFIG_SOCK_CGROUP_DATA** configuration option. |
| 3721 |
* Return |
| 3722 |
* The id is returned or 0 in case the id could not be retrieved. |
| 3723 |
* |
| 3724 |
* u64 bpf_get_current_cgroup_id(void) |
| 3725 |
* Description |
| 3726 |
* Get the current cgroup id based on the cgroup within which |
| 3727 |
* the current task is running. |
| 3728 |
* Return |
| 3729 |
* A 64-bit integer containing the current cgroup id based |
| 3730 |
* on the cgroup within which the current task is running. |
| 3731 |
* |
| 3732 |
* void *bpf_get_local_storage(void *map, u64 flags) |
| 3733 |
* Description |
| 3734 |
* Get the pointer to the local storage area. |
| 3735 |
* The type and the size of the local storage is defined |
| 3736 |
* by the *map* argument. |
| 3737 |
* The *flags* meaning is specific for each map type, |
| 3738 |
* and has to be 0 for cgroup local storage. |
| 3739 |
* |
| 3740 |
* Depending on the BPF program type, a local storage area |
| 3741 |
* can be shared between multiple instances of the BPF program, |
| 3742 |
* running simultaneously. |
| 3743 |
* |
| 3744 |
* A user should care about the synchronization by himself. |
| 3745 |
* For example, by using the **BPF_ATOMIC** instructions to alter |
| 3746 |
* the shared data. |
| 3747 |
* Return |
| 3748 |
* A pointer to the local storage area. |
| 3749 |
* |
| 3750 |
* long bpf_sk_select_reuseport(struct sk_reuseport_md *reuse, struct bpf_map *map, void *key, u64 flags) |
| 3751 |
* Description |
| 3752 |
* Select a **SO_REUSEPORT** socket from a |
| 3753 |
* **BPF_MAP_TYPE_REUSEPORT_SOCKARRAY** *map*. |
| 3754 |
* It checks the selected socket is matching the incoming |
| 3755 |
* request in the socket buffer. |
| 3756 |
* Return |
| 3757 |
* 0 on success, or a negative error in case of failure. |
| 3758 |
* |
| 3759 |
* u64 bpf_skb_ancestor_cgroup_id(struct sk_buff *skb, int ancestor_level) |
| 3760 |
* Description |
| 3761 |
* Return id of cgroup v2 that is ancestor of cgroup associated |
| 3762 |
* with the *skb* at the *ancestor_level*. The root cgroup is at |
| 3763 |
* *ancestor_level* zero and each step down the hierarchy |
| 3764 |
* increments the level. If *ancestor_level* == level of cgroup |
| 3765 |
* associated with *skb*, then return value will be same as that |
| 3766 |
* of **bpf_skb_cgroup_id**\ (). |
| 3767 |
* |
| 3768 |
* The helper is useful to implement policies based on cgroups |
| 3769 |
* that are upper in hierarchy than immediate cgroup associated |
| 3770 |
* with *skb*. |
| 3771 |
* |
| 3772 |
* The format of returned id and helper limitations are same as in |
| 3773 |
* **bpf_skb_cgroup_id**\ (). |
| 3774 |
* Return |
| 3775 |
* The id is returned or 0 in case the id could not be retrieved. |
| 3776 |
* |
| 3777 |
* struct bpf_sock *bpf_sk_lookup_tcp(void *ctx, struct bpf_sock_tuple *tuple, u32 tuple_size, u64 netns, u64 flags) |
| 3778 |
* Description |
| 3779 |
* Look for TCP socket matching *tuple*, optionally in a child |
| 3780 |
* network namespace *netns*. The return value must be checked, |
| 3781 |
* and if non-**NULL**, released via **bpf_sk_release**\ (). |
| 3782 |
* |
| 3783 |
* The *ctx* should point to the context of the program, such as |
| 3784 |
* the skb or socket (depending on the hook in use). This is used |
| 3785 |
* to determine the base network namespace for the lookup. |
| 3786 |
* |
| 3787 |
* *tuple_size* must be one of: |
| 3788 |
* |
| 3789 |
* **sizeof**\ (*tuple*\ **->ipv4**) |
| 3790 |
* Look for an IPv4 socket. |
| 3791 |
* **sizeof**\ (*tuple*\ **->ipv6**) |
| 3792 |
* Look for an IPv6 socket. |
| 3793 |
* |
| 3794 |
* If the *netns* is a negative signed 32-bit integer, then the |
| 3795 |
* socket lookup table in the netns associated with the *ctx* |
| 3796 |
* will be used. For the TC hooks, this is the netns of the device |
| 3797 |
* in the skb. For socket hooks, this is the netns of the socket. |
| 3798 |
* If *netns* is any other signed 32-bit value greater than or |
| 3799 |
* equal to zero then it specifies the ID of the netns relative to |
| 3800 |
* the netns associated with the *ctx*. *netns* values beyond the |
| 3801 |
* range of 32-bit integers are reserved for future use. |
| 3802 |
* |
| 3803 |
* All values for *flags* are reserved for future usage, and must |
| 3804 |
* be left at zero. |
| 3805 |
* |
| 3806 |
* This helper is available only if the kernel was compiled with |
| 3807 |
* **CONFIG_NET** configuration option. |
| 3808 |
* Return |
| 3809 |
* Pointer to **struct bpf_sock**, or **NULL** in case of failure. |
| 3810 |
* For sockets with reuseport option, the **struct bpf_sock** |
| 3811 |
* result is from *reuse*\ **->socks**\ [] using the hash of the |
| 3812 |
* tuple. |
| 3813 |
* |
| 3814 |
* struct bpf_sock *bpf_sk_lookup_udp(void *ctx, struct bpf_sock_tuple *tuple, u32 tuple_size, u64 netns, u64 flags) |
| 3815 |
* Description |
| 3816 |
* Look for UDP socket matching *tuple*, optionally in a child |
| 3817 |
* network namespace *netns*. The return value must be checked, |
| 3818 |
* and if non-**NULL**, released via **bpf_sk_release**\ (). |
| 3819 |
* |
| 3820 |
* The *ctx* should point to the context of the program, such as |
| 3821 |
* the skb or socket (depending on the hook in use). This is used |
| 3822 |
* to determine the base network namespace for the lookup. |
| 3823 |
* |
| 3824 |
* *tuple_size* must be one of: |
| 3825 |
* |
| 3826 |
* **sizeof**\ (*tuple*\ **->ipv4**) |
| 3827 |
* Look for an IPv4 socket. |
| 3828 |
* **sizeof**\ (*tuple*\ **->ipv6**) |
| 3829 |
* Look for an IPv6 socket. |
| 3830 |
* |
| 3831 |
* If the *netns* is a negative signed 32-bit integer, then the |
| 3832 |
* socket lookup table in the netns associated with the *ctx* |
| 3833 |
* will be used. For the TC hooks, this is the netns of the device |
| 3834 |
* in the skb. For socket hooks, this is the netns of the socket. |
| 3835 |
* If *netns* is any other signed 32-bit value greater than or |
| 3836 |
* equal to zero then it specifies the ID of the netns relative to |
| 3837 |
* the netns associated with the *ctx*. *netns* values beyond the |
| 3838 |
* range of 32-bit integers are reserved for future use. |
| 3839 |
* |
| 3840 |
* All values for *flags* are reserved for future usage, and must |
| 3841 |
* be left at zero. |
| 3842 |
* |
| 3843 |
* This helper is available only if the kernel was compiled with |
| 3844 |
* **CONFIG_NET** configuration option. |
| 3845 |
* Return |
| 3846 |
* Pointer to **struct bpf_sock**, or **NULL** in case of failure. |
| 3847 |
* For sockets with reuseport option, the **struct bpf_sock** |
| 3848 |
* result is from *reuse*\ **->socks**\ [] using the hash of the |
| 3849 |
* tuple. |
| 3850 |
* |
| 3851 |
* long bpf_sk_release(void *sock) |
| 3852 |
* Description |
| 3853 |
* Release the reference held by *sock*. *sock* must be a |
| 3854 |
* non-**NULL** pointer that was returned from |
| 3855 |
* **bpf_sk_lookup_xxx**\ (). |
| 3856 |
* Return |
| 3857 |
* 0 on success, or a negative error in case of failure. |
| 3858 |
* |
| 3859 |
* long bpf_map_push_elem(struct bpf_map *map, const void *value, u64 flags) |
| 3860 |
* Description |
| 3861 |
* Push an element *value* in *map*. *flags* is one of: |
| 3862 |
* |
| 3863 |
* **BPF_EXIST** |
| 3864 |
* If the queue/stack is full, the oldest element is |
| 3865 |
* removed to make room for this. |
| 3866 |
* Return |
| 3867 |
* 0 on success, or a negative error in case of failure. |
| 3868 |
* |
| 3869 |
* long bpf_map_pop_elem(struct bpf_map *map, void *value) |
| 3870 |
* Description |
| 3871 |
* Pop an element from *map*. |
| 3872 |
* Return |
| 3873 |
* 0 on success, or a negative error in case of failure. |
| 3874 |
* |
| 3875 |
* long bpf_map_peek_elem(struct bpf_map *map, void *value) |
| 3876 |
* Description |
| 3877 |
* Get an element from *map* without removing it. |
| 3878 |
* Return |
| 3879 |
* 0 on success, or a negative error in case of failure. |
| 3880 |
* |
| 3881 |
* long bpf_msg_push_data(struct sk_msg_buff *msg, u32 start, u32 len, u64 flags) |
| 3882 |
* Description |
| 3883 |
* For socket policies, insert *len* bytes into *msg* at offset |
| 3884 |
* *start*. |
| 3885 |
* |
| 3886 |
* If a program of type **BPF_PROG_TYPE_SK_MSG** is run on a |
| 3887 |
* *msg* it may want to insert metadata or options into the *msg*. |
| 3888 |
* This can later be read and used by any of the lower layer BPF |
| 3889 |
* hooks. |
| 3890 |
* |
| 3891 |
* This helper may fail if under memory pressure (a malloc |
| 3892 |
* fails) in these cases BPF programs will get an appropriate |
| 3893 |
* error and BPF programs will need to handle them. |
| 3894 |
* Return |
| 3895 |
* 0 on success, or a negative error in case of failure. |
| 3896 |
* |
| 3897 |
* long bpf_msg_pop_data(struct sk_msg_buff *msg, u32 start, u32 len, u64 flags) |
| 3898 |
* Description |
| 3899 |
* Will remove *len* bytes from a *msg* starting at byte *start*. |
| 3900 |
* This may result in **ENOMEM** errors under certain situations if |
| 3901 |
* an allocation and copy are required due to a full ring buffer. |
| 3902 |
* However, the helper will try to avoid doing the allocation |
| 3903 |
* if possible. Other errors can occur if input parameters are |
| 3904 |
* invalid either due to *start* byte not being valid part of *msg* |
| 3905 |
* payload and/or *pop* value being to large. |
| 3906 |
* Return |
| 3907 |
* 0 on success, or a negative error in case of failure. |
| 3908 |
* |
| 3909 |
* long bpf_rc_pointer_rel(void *ctx, s32 rel_x, s32 rel_y) |
| 3910 |
* Description |
| 3911 |
* This helper is used in programs implementing IR decoding, to |
| 3912 |
* report a successfully decoded pointer movement. |
| 3913 |
* |
| 3914 |
* The *ctx* should point to the lirc sample as passed into |
| 3915 |
* the program. |
| 3916 |
* |
| 3917 |
* This helper is only available is the kernel was compiled with |
| 3918 |
* the **CONFIG_BPF_LIRC_MODE2** configuration option set to |
| 3919 |
* "**y**". |
| 3920 |
* Return |
| 3921 |
* 0 |
| 3922 |
* |
| 3923 |
* long bpf_spin_lock(struct bpf_spin_lock *lock) |
| 3924 |
* Description |
| 3925 |
* Acquire a spinlock represented by the pointer *lock*, which is |
| 3926 |
* stored as part of a value of a map. Taking the lock allows to |
| 3927 |
* safely update the rest of the fields in that value. The |
| 3928 |
* spinlock can (and must) later be released with a call to |
| 3929 |
* **bpf_spin_unlock**\ (\ *lock*\ ). |
| 3930 |
* |
| 3931 |
* Spinlocks in BPF programs come with a number of restrictions |
| 3932 |
* and constraints: |
| 3933 |
* |
| 3934 |
* * **bpf_spin_lock** objects are only allowed inside maps of |
| 3935 |
* types **BPF_MAP_TYPE_HASH** and **BPF_MAP_TYPE_ARRAY** (this |
| 3936 |
* list could be extended in the future). |
| 3937 |
* * BTF description of the map is mandatory. |
| 3938 |
* * The BPF program can take ONE lock at a time, since taking two |
| 3939 |
* or more could cause dead locks. |
| 3940 |
* * Only one **struct bpf_spin_lock** is allowed per map element. |
| 3941 |
* * When the lock is taken, calls (either BPF to BPF or helpers) |
| 3942 |
* are not allowed. |
| 3943 |
* * The **BPF_LD_ABS** and **BPF_LD_IND** instructions are not |
| 3944 |
* allowed inside a spinlock-ed region. |
| 3945 |
* * The BPF program MUST call **bpf_spin_unlock**\ () to release |
| 3946 |
* the lock, on all execution paths, before it returns. |
| 3947 |
* * The BPF program can access **struct bpf_spin_lock** only via |
| 3948 |
* the **bpf_spin_lock**\ () and **bpf_spin_unlock**\ () |
| 3949 |
* helpers. Loading or storing data into the **struct |
| 3950 |
* bpf_spin_lock** *lock*\ **;** field of a map is not allowed. |
| 3951 |
* * To use the **bpf_spin_lock**\ () helper, the BTF description |
| 3952 |
* of the map value must be a struct and have **struct |
| 3953 |
* bpf_spin_lock** *anyname*\ **;** field at the top level. |
| 3954 |
* Nested lock inside another struct is not allowed. |
| 3955 |
* * The **struct bpf_spin_lock** *lock* field in a map value must |
| 3956 |
* be aligned on a multiple of 4 bytes in that value. |
| 3957 |
* * Syscall with command **BPF_MAP_LOOKUP_ELEM** does not copy |
| 3958 |
* the **bpf_spin_lock** field to user space. |
| 3959 |
* * Syscall with command **BPF_MAP_UPDATE_ELEM**, or update from |
| 3960 |
* a BPF program, do not update the **bpf_spin_lock** field. |
| 3961 |
* * **bpf_spin_lock** cannot be on the stack or inside a |
| 3962 |
* networking packet (it can only be inside of a map values). |
| 3963 |
* * **bpf_spin_lock** is available to root only. |
| 3964 |
* * Tracing programs and socket filter programs cannot use |
| 3965 |
* **bpf_spin_lock**\ () due to insufficient preemption checks |
| 3966 |
* (but this may change in the future). |
| 3967 |
* * **bpf_spin_lock** is not allowed in inner maps of map-in-map. |
| 3968 |
* Return |
| 3969 |
* 0 |
| 3970 |
* |
| 3971 |
* long bpf_spin_unlock(struct bpf_spin_lock *lock) |
| 3972 |
* Description |
| 3973 |
* Release the *lock* previously locked by a call to |
| 3974 |
* **bpf_spin_lock**\ (\ *lock*\ ). |
| 3975 |
* Return |
| 3976 |
* 0 |
| 3977 |
* |
| 3978 |
* struct bpf_sock *bpf_sk_fullsock(struct bpf_sock *sk) |
| 3979 |
* Description |
| 3980 |
* This helper gets a **struct bpf_sock** pointer such |
| 3981 |
* that all the fields in this **bpf_sock** can be accessed. |
| 3982 |
* Return |
| 3983 |
* A **struct bpf_sock** pointer on success, or **NULL** in |
| 3984 |
* case of failure. |
| 3985 |
* |
| 3986 |
* struct bpf_tcp_sock *bpf_tcp_sock(struct bpf_sock *sk) |
| 3987 |
* Description |
| 3988 |
* This helper gets a **struct bpf_tcp_sock** pointer from a |
| 3989 |
* **struct bpf_sock** pointer. |
| 3990 |
* Return |
| 3991 |
* A **struct bpf_tcp_sock** pointer on success, or **NULL** in |
| 3992 |
* case of failure. |
| 3993 |
* |
| 3994 |
* long bpf_skb_ecn_set_ce(struct sk_buff *skb) |
| 3995 |
* Description |
| 3996 |
* Set ECN (Explicit Congestion Notification) field of IP header |
| 3997 |
* to **CE** (Congestion Encountered) if current value is **ECT** |
| 3998 |
* (ECN Capable Transport). Otherwise, do nothing. Works with IPv6 |
| 3999 |
* and IPv4. |
| 4000 |
* Return |
| 4001 |
* 1 if the **CE** flag is set (either by the current helper call |
| 4002 |
* or because it was already present), 0 if it is not set. |
| 4003 |
* |
| 4004 |
* struct bpf_sock *bpf_get_listener_sock(struct bpf_sock *sk) |
| 4005 |
* Description |
| 4006 |
* Return a **struct bpf_sock** pointer in **TCP_LISTEN** state. |
| 4007 |
* **bpf_sk_release**\ () is unnecessary and not allowed. |
| 4008 |
* Return |
| 4009 |
* A **struct bpf_sock** pointer on success, or **NULL** in |
| 4010 |
* case of failure. |
| 4011 |
* |
| 4012 |
* struct bpf_sock *bpf_skc_lookup_tcp(void *ctx, struct bpf_sock_tuple *tuple, u32 tuple_size, u64 netns, u64 flags) |
| 4013 |
* Description |
| 4014 |
* Look for TCP socket matching *tuple*, optionally in a child |
| 4015 |
* network namespace *netns*. The return value must be checked, |
| 4016 |
* and if non-**NULL**, released via **bpf_sk_release**\ (). |
| 4017 |
* |
| 4018 |
* This function is identical to **bpf_sk_lookup_tcp**\ (), except |
| 4019 |
* that it also returns timewait or request sockets. Use |
| 4020 |
* **bpf_sk_fullsock**\ () or **bpf_tcp_sock**\ () to access the |
| 4021 |
* full structure. |
| 4022 |
* |
| 4023 |
* This helper is available only if the kernel was compiled with |
| 4024 |
* **CONFIG_NET** configuration option. |
| 4025 |
* Return |
| 4026 |
* Pointer to **struct bpf_sock**, or **NULL** in case of failure. |
| 4027 |
* For sockets with reuseport option, the **struct bpf_sock** |
| 4028 |
* result is from *reuse*\ **->socks**\ [] using the hash of the |
| 4029 |
* tuple. |
| 4030 |
* |
| 4031 |
* long bpf_tcp_check_syncookie(void *sk, void *iph, u32 iph_len, struct tcphdr *th, u32 th_len) |
| 4032 |
* Description |
| 4033 |
* Check whether *iph* and *th* contain a valid SYN cookie ACK for |
| 4034 |
* the listening socket in *sk*. |
| 4035 |
* |
| 4036 |
* *iph* points to the start of the IPv4 or IPv6 header, while |
| 4037 |
* *iph_len* contains **sizeof**\ (**struct iphdr**) or |
| 4038 |
* **sizeof**\ (**struct ipv6hdr**). |
| 4039 |
* |
| 4040 |
* *th* points to the start of the TCP header, while *th_len* |
| 4041 |
* contains the length of the TCP header (at least |
| 4042 |
* **sizeof**\ (**struct tcphdr**)). |
| 4043 |
* Return |
| 4044 |
* 0 if *iph* and *th* are a valid SYN cookie ACK, or a negative |
| 4045 |
* error otherwise. |
| 4046 |
* |
| 4047 |
* long bpf_sysctl_get_name(struct bpf_sysctl *ctx, char *buf, size_t buf_len, u64 flags) |
| 4048 |
* Description |
| 4049 |
* Get name of sysctl in /proc/sys/ and copy it into provided by |
| 4050 |
* program buffer *buf* of size *buf_len*. |
| 4051 |
* |
| 4052 |
* The buffer is always NUL terminated, unless it's zero-sized. |
| 4053 |
* |
| 4054 |
* If *flags* is zero, full name (e.g. "net/ipv4/tcp_mem") is |
| 4055 |
* copied. Use **BPF_F_SYSCTL_BASE_NAME** flag to copy base name |
| 4056 |
* only (e.g. "tcp_mem"). |
| 4057 |
* Return |
| 4058 |
* Number of character copied (not including the trailing NUL). |
| 4059 |
* |
| 4060 |
* **-E2BIG** if the buffer wasn't big enough (*buf* will contain |
| 4061 |
* truncated name in this case). |
| 4062 |
* |
| 4063 |
* long bpf_sysctl_get_current_value(struct bpf_sysctl *ctx, char *buf, size_t buf_len) |
| 4064 |
* Description |
| 4065 |
* Get current value of sysctl as it is presented in /proc/sys |
| 4066 |
* (incl. newline, etc), and copy it as a string into provided |
| 4067 |
* by program buffer *buf* of size *buf_len*. |
| 4068 |
* |
| 4069 |
* The whole value is copied, no matter what file position user |
| 4070 |
* space issued e.g. sys_read at. |
| 4071 |
* |
| 4072 |
* The buffer is always NUL terminated, unless it's zero-sized. |
| 4073 |
* Return |
| 4074 |
* Number of character copied (not including the trailing NUL). |
| 4075 |
* |
| 4076 |
* **-E2BIG** if the buffer wasn't big enough (*buf* will contain |
| 4077 |
* truncated name in this case). |
| 4078 |
* |
| 4079 |
* **-EINVAL** if current value was unavailable, e.g. because |
| 4080 |
* sysctl is uninitialized and read returns -EIO for it. |
| 4081 |
* |
| 4082 |
* long bpf_sysctl_get_new_value(struct bpf_sysctl *ctx, char *buf, size_t buf_len) |
| 4083 |
* Description |
| 4084 |
* Get new value being written by user space to sysctl (before |
| 4085 |
* the actual write happens) and copy it as a string into |
| 4086 |
* provided by program buffer *buf* of size *buf_len*. |
| 4087 |
* |
| 4088 |
* User space may write new value at file position > 0. |
| 4089 |
* |
| 4090 |
* The buffer is always NUL terminated, unless it's zero-sized. |
| 4091 |
* Return |
| 4092 |
* Number of character copied (not including the trailing NUL). |
| 4093 |
* |
| 4094 |
* **-E2BIG** if the buffer wasn't big enough (*buf* will contain |
| 4095 |
* truncated name in this case). |
| 4096 |
* |
| 4097 |
* **-EINVAL** if sysctl is being read. |
| 4098 |
* |
| 4099 |
* long bpf_sysctl_set_new_value(struct bpf_sysctl *ctx, const char *buf, size_t buf_len) |
| 4100 |
* Description |
| 4101 |
* Override new value being written by user space to sysctl with |
| 4102 |
* value provided by program in buffer *buf* of size *buf_len*. |
| 4103 |
* |
| 4104 |
* *buf* should contain a string in same form as provided by user |
| 4105 |
* space on sysctl write. |
| 4106 |
* |
| 4107 |
* User space may write new value at file position > 0. To override |
| 4108 |
* the whole sysctl value file position should be set to zero. |
| 4109 |
* Return |
| 4110 |
* 0 on success. |
| 4111 |
* |
| 4112 |
* **-E2BIG** if the *buf_len* is too big. |
| 4113 |
* |
| 4114 |
* **-EINVAL** if sysctl is being read. |
| 4115 |
* |
| 4116 |
* long bpf_strtol(const char *buf, size_t buf_len, u64 flags, long *res) |
| 4117 |
* Description |
| 4118 |
* Convert the initial part of the string from buffer *buf* of |
| 4119 |
* size *buf_len* to a long integer according to the given base |
| 4120 |
* and save the result in *res*. |
| 4121 |
* |
| 4122 |
* The string may begin with an arbitrary amount of white space |
| 4123 |
* (as determined by **isspace**\ (3)) followed by a single |
| 4124 |
* optional '**-**' sign. |
| 4125 |
* |
| 4126 |
* Five least significant bits of *flags* encode base, other bits |
| 4127 |
* are currently unused. |
| 4128 |
* |
| 4129 |
* Base must be either 8, 10, 16 or 0 to detect it automatically |
| 4130 |
* similar to user space **strtol**\ (3). |
| 4131 |
* Return |
| 4132 |
* Number of characters consumed on success. Must be positive but |
| 4133 |
* no more than *buf_len*. |
| 4134 |
* |
| 4135 |
* **-EINVAL** if no valid digits were found or unsupported base |
| 4136 |
* was provided. |
| 4137 |
* |
| 4138 |
* **-ERANGE** if resulting value was out of range. |
| 4139 |
* |
| 4140 |
* long bpf_strtoul(const char *buf, size_t buf_len, u64 flags, unsigned long *res) |
| 4141 |
* Description |
| 4142 |
* Convert the initial part of the string from buffer *buf* of |
| 4143 |
* size *buf_len* to an unsigned long integer according to the |
| 4144 |
* given base and save the result in *res*. |
| 4145 |
* |
| 4146 |
* The string may begin with an arbitrary amount of white space |
| 4147 |
* (as determined by **isspace**\ (3)). |
| 4148 |
* |
| 4149 |
* Five least significant bits of *flags* encode base, other bits |
| 4150 |
* are currently unused. |
| 4151 |
* |
| 4152 |
* Base must be either 8, 10, 16 or 0 to detect it automatically |
| 4153 |
* similar to user space **strtoul**\ (3). |
| 4154 |
* Return |
| 4155 |
* Number of characters consumed on success. Must be positive but |
| 4156 |
* no more than *buf_len*. |
| 4157 |
* |
| 4158 |
* **-EINVAL** if no valid digits were found or unsupported base |
| 4159 |
* was provided. |
| 4160 |
* |
| 4161 |
* **-ERANGE** if resulting value was out of range. |
| 4162 |
* |
| 4163 |
* void *bpf_sk_storage_get(struct bpf_map *map, void *sk, void *value, u64 flags) |
| 4164 |
* Description |
| 4165 |
* Get a bpf-local-storage from a *sk*. |
| 4166 |
* |
| 4167 |
* Logically, it could be thought of getting the value from |
| 4168 |
* a *map* with *sk* as the **key**. From this |
| 4169 |
* perspective, the usage is not much different from |
| 4170 |
* **bpf_map_lookup_elem**\ (*map*, **&**\ *sk*) except this |
| 4171 |
* helper enforces the key must be a full socket and the map must |
| 4172 |
* be a **BPF_MAP_TYPE_SK_STORAGE** also. |
| 4173 |
* |
| 4174 |
* Underneath, the value is stored locally at *sk* instead of |
| 4175 |
* the *map*. The *map* is used as the bpf-local-storage |
| 4176 |
* "type". The bpf-local-storage "type" (i.e. the *map*) is |
| 4177 |
* searched against all bpf-local-storages residing at *sk*. |
| 4178 |
* |
| 4179 |
* *sk* is a kernel **struct sock** pointer for LSM program. |
| 4180 |
* *sk* is a **struct bpf_sock** pointer for other program types. |
| 4181 |
* |
| 4182 |
* An optional *flags* (**BPF_SK_STORAGE_GET_F_CREATE**) can be |
| 4183 |
* used such that a new bpf-local-storage will be |
| 4184 |
* created if one does not exist. *value* can be used |
| 4185 |
* together with **BPF_SK_STORAGE_GET_F_CREATE** to specify |
| 4186 |
* the initial value of a bpf-local-storage. If *value* is |
| 4187 |
* **NULL**, the new bpf-local-storage will be zero initialized. |
| 4188 |
* Return |
| 4189 |
* A bpf-local-storage pointer is returned on success. |
| 4190 |
* |
| 4191 |
* **NULL** if not found or there was an error in adding |
| 4192 |
* a new bpf-local-storage. |
| 4193 |
* |
| 4194 |
* long bpf_sk_storage_delete(struct bpf_map *map, void *sk) |
| 4195 |
* Description |
| 4196 |
* Delete a bpf-local-storage from a *sk*. |
| 4197 |
* Return |
| 4198 |
* 0 on success. |
| 4199 |
* |
| 4200 |
* **-ENOENT** if the bpf-local-storage cannot be found. |
| 4201 |
* **-EINVAL** if sk is not a fullsock (e.g. a request_sock). |
| 4202 |
* |
| 4203 |
* long bpf_send_signal(u32 sig) |
| 4204 |
* Description |
| 4205 |
* Send signal *sig* to the process of the current task. |
| 4206 |
* The signal may be delivered to any of this process's threads. |
| 4207 |
* Return |
| 4208 |
* 0 on success or successfully queued. |
| 4209 |
* |
| 4210 |
* **-EBUSY** if work queue under nmi is full. |
| 4211 |
* |
| 4212 |
* **-EINVAL** if *sig* is invalid. |
| 4213 |
* |
| 4214 |
* **-EPERM** if no permission to send the *sig*. |
| 4215 |
* |
| 4216 |
* **-EAGAIN** if bpf program can try again. |
| 4217 |
* |
| 4218 |
* s64 bpf_tcp_gen_syncookie(void *sk, void *iph, u32 iph_len, struct tcphdr *th, u32 th_len) |
| 4219 |
* Description |
| 4220 |
* Try to issue a SYN cookie for the packet with corresponding |
| 4221 |
* IP/TCP headers, *iph* and *th*, on the listening socket in *sk*. |
| 4222 |
* |
| 4223 |
* *iph* points to the start of the IPv4 or IPv6 header, while |
| 4224 |
* *iph_len* contains **sizeof**\ (**struct iphdr**) or |
| 4225 |
* **sizeof**\ (**struct ipv6hdr**). |
| 4226 |
* |
| 4227 |
* *th* points to the start of the TCP header, while *th_len* |
| 4228 |
* contains the length of the TCP header with options (at least |
| 4229 |
* **sizeof**\ (**struct tcphdr**)). |
| 4230 |
* Return |
| 4231 |
* On success, lower 32 bits hold the generated SYN cookie in |
| 4232 |
* followed by 16 bits which hold the MSS value for that cookie, |
| 4233 |
* and the top 16 bits are unused. |
| 4234 |
* |
| 4235 |
* On failure, the returned value is one of the following: |
| 4236 |
* |
| 4237 |
* **-EINVAL** SYN cookie cannot be issued due to error |
| 4238 |
* |
| 4239 |
* **-ENOENT** SYN cookie should not be issued (no SYN flood) |
| 4240 |
* |
| 4241 |
* **-EOPNOTSUPP** kernel configuration does not enable SYN cookies |
| 4242 |
* |
| 4243 |
* **-EPROTONOSUPPORT** IP packet version is not 4 or 6 |
| 4244 |
* |
| 4245 |
* long bpf_skb_output(void *ctx, struct bpf_map *map, u64 flags, void *data, u64 size) |
| 4246 |
* Description |
| 4247 |
* Write raw *data* blob into a special BPF perf event held by |
| 4248 |
* *map* of type **BPF_MAP_TYPE_PERF_EVENT_ARRAY**. This perf |
| 4249 |
* event must have the following attributes: **PERF_SAMPLE_RAW** |
| 4250 |
* as **sample_type**, **PERF_TYPE_SOFTWARE** as **type**, and |
| 4251 |
* **PERF_COUNT_SW_BPF_OUTPUT** as **config**. |
| 4252 |
* |
| 4253 |
* The *flags* are used to indicate the index in *map* for which |
| 4254 |
* the value must be put, masked with **BPF_F_INDEX_MASK**. |
| 4255 |
* Alternatively, *flags* can be set to **BPF_F_CURRENT_CPU** |
| 4256 |
* to indicate that the index of the current CPU core should be |
| 4257 |
* used. |
| 4258 |
* |
| 4259 |
* The value to write, of *size*, is passed through eBPF stack and |
| 4260 |
* pointed by *data*. |
| 4261 |
* |
| 4262 |
* *ctx* is a pointer to in-kernel struct sk_buff. |
| 4263 |
* |
| 4264 |
* This helper is similar to **bpf_perf_event_output**\ () but |
| 4265 |
* restricted to raw_tracepoint bpf programs. |
| 4266 |
* Return |
| 4267 |
* 0 on success, or a negative error in case of failure. |
| 4268 |
* |
| 4269 |
* long bpf_probe_read_user(void *dst, u32 size, const void *unsafe_ptr) |
| 4270 |
* Description |
| 4271 |
* Safely attempt to read *size* bytes from user space address |
| 4272 |
* *unsafe_ptr* and store the data in *dst*. |
| 4273 |
* Return |
| 4274 |
* 0 on success, or a negative error in case of failure. |
| 4275 |
* |
| 4276 |
* long bpf_probe_read_kernel(void *dst, u32 size, const void *unsafe_ptr) |
| 4277 |
* Description |
| 4278 |
* Safely attempt to read *size* bytes from kernel space address |
| 4279 |
* *unsafe_ptr* and store the data in *dst*. |
| 4280 |
* Return |
| 4281 |
* 0 on success, or a negative error in case of failure. |
| 4282 |
* |
| 4283 |
* long bpf_probe_read_user_str(void *dst, u32 size, const void *unsafe_ptr) |
| 4284 |
* Description |
| 4285 |
* Copy a NUL terminated string from an unsafe user address |
| 4286 |
* *unsafe_ptr* to *dst*. The *size* should include the |
| 4287 |
* terminating NUL byte. In case the string length is smaller than |
| 4288 |
* *size*, the target is not padded with further NUL bytes. If the |
| 4289 |
* string length is larger than *size*, just *size*-1 bytes are |
| 4290 |
* copied and the last byte is set to NUL. |
| 4291 |
* |
| 4292 |
* On success, returns the number of bytes that were written, |
| 4293 |
* including the terminal NUL. This makes this helper useful in |
| 4294 |
* tracing programs for reading strings, and more importantly to |
| 4295 |
* get its length at runtime. See the following snippet: |
| 4296 |
* |
| 4297 |
* :: |
| 4298 |
* |
| 4299 |
* SEC("kprobe/sys_open") |
| 4300 |
* void bpf_sys_open(struct pt_regs *ctx) |
| 4301 |
* { |
| 4302 |
* char buf[PATHLEN]; // PATHLEN is defined to 256 |
| 4303 |
* int res = bpf_probe_read_user_str(buf, sizeof(buf), |
| 4304 |
* ctx->di); |
| 4305 |
* |
| 4306 |
* // Consume buf, for example push it to |
| 4307 |
* // userspace via bpf_perf_event_output(); we |
| 4308 |
* // can use res (the string length) as event |
| 4309 |
* // size, after checking its boundaries. |
| 4310 |
* } |
| 4311 |
* |
| 4312 |
* In comparison, using **bpf_probe_read_user**\ () helper here |
| 4313 |
* instead to read the string would require to estimate the length |
| 4314 |
* at compile time, and would often result in copying more memory |
| 4315 |
* than necessary. |
| 4316 |
* |
| 4317 |
* Another useful use case is when parsing individual process |
| 4318 |
* arguments or individual environment variables navigating |
| 4319 |
* *current*\ **->mm->arg_start** and *current*\ |
| 4320 |
* **->mm->env_start**: using this helper and the return value, |
| 4321 |
* one can quickly iterate at the right offset of the memory area. |
| 4322 |
* Return |
| 4323 |
* On success, the strictly positive length of the output string, |
| 4324 |
* including the trailing NUL character. On error, a negative |
| 4325 |
* value. |
| 4326 |
* |
| 4327 |
* long bpf_probe_read_kernel_str(void *dst, u32 size, const void *unsafe_ptr) |
| 4328 |
* Description |
| 4329 |
* Copy a NUL terminated string from an unsafe kernel address *unsafe_ptr* |
| 4330 |
* to *dst*. Same semantics as with **bpf_probe_read_user_str**\ () apply. |
| 4331 |
* Return |
| 4332 |
* On success, the strictly positive length of the string, including |
| 4333 |
* the trailing NUL character. On error, a negative value. |
| 4334 |
* |
| 4335 |
* long bpf_tcp_send_ack(void *tp, u32 rcv_nxt) |
| 4336 |
* Description |
| 4337 |
* Send out a tcp-ack. *tp* is the in-kernel struct **tcp_sock**. |
| 4338 |
* *rcv_nxt* is the ack_seq to be sent out. |
| 4339 |
* Return |
| 4340 |
* 0 on success, or a negative error in case of failure. |
| 4341 |
* |
| 4342 |
* long bpf_send_signal_thread(u32 sig) |
| 4343 |
* Description |
| 4344 |
* Send signal *sig* to the thread corresponding to the current task. |
| 4345 |
* Return |
| 4346 |
* 0 on success or successfully queued. |
| 4347 |
* |
| 4348 |
* **-EBUSY** if work queue under nmi is full. |
| 4349 |
* |
| 4350 |
* **-EINVAL** if *sig* is invalid. |
| 4351 |
* |
| 4352 |
* **-EPERM** if no permission to send the *sig*. |
| 4353 |
* |
| 4354 |
* **-EAGAIN** if bpf program can try again. |
| 4355 |
* |
| 4356 |
* u64 bpf_jiffies64(void) |
| 4357 |
* Description |
| 4358 |
* Obtain the 64bit jiffies |
| 4359 |
* Return |
| 4360 |
* The 64 bit jiffies |
| 4361 |
* |
| 4362 |
* long bpf_read_branch_records(struct bpf_perf_event_data *ctx, void *buf, u32 size, u64 flags) |
| 4363 |
* Description |
| 4364 |
* For an eBPF program attached to a perf event, retrieve the |
| 4365 |
* branch records (**struct perf_branch_entry**) associated to *ctx* |
| 4366 |
* and store it in the buffer pointed by *buf* up to size |
| 4367 |
* *size* bytes. |
| 4368 |
* Return |
| 4369 |
* On success, number of bytes written to *buf*. On error, a |
| 4370 |
* negative value. |
| 4371 |
* |
| 4372 |
* The *flags* can be set to **BPF_F_GET_BRANCH_RECORDS_SIZE** to |
| 4373 |
* instead return the number of bytes required to store all the |
| 4374 |
* branch entries. If this flag is set, *buf* may be NULL. |
| 4375 |
* |
| 4376 |
* **-EINVAL** if arguments invalid or **size** not a multiple |
| 4377 |
* of **sizeof**\ (**struct perf_branch_entry**\ ). |
| 4378 |
* |
| 4379 |
* **-ENOENT** if architecture does not support branch records. |
| 4380 |
* |
| 4381 |
* long bpf_get_ns_current_pid_tgid(u64 dev, u64 ino, struct bpf_pidns_info *nsdata, u32 size) |
| 4382 |
* Description |
| 4383 |
* Returns 0 on success, values for *pid* and *tgid* as seen from the current |
| 4384 |
* *namespace* will be returned in *nsdata*. |
| 4385 |
* Return |
| 4386 |
* 0 on success, or one of the following in case of failure: |
| 4387 |
* |
| 4388 |
* **-EINVAL** if dev and inum supplied don't match dev_t and inode number |
| 4389 |
* with nsfs of current task, or if dev conversion to dev_t lost high bits. |
| 4390 |
* |
| 4391 |
* **-ENOENT** if pidns does not exists for the current task. |
| 4392 |
* |
| 4393 |
* long bpf_xdp_output(void *ctx, struct bpf_map *map, u64 flags, void *data, u64 size) |
| 4394 |
* Description |
| 4395 |
* Write raw *data* blob into a special BPF perf event held by |
| 4396 |
* *map* of type **BPF_MAP_TYPE_PERF_EVENT_ARRAY**. This perf |
| 4397 |
* event must have the following attributes: **PERF_SAMPLE_RAW** |
| 4398 |
* as **sample_type**, **PERF_TYPE_SOFTWARE** as **type**, and |
| 4399 |
* **PERF_COUNT_SW_BPF_OUTPUT** as **config**. |
| 4400 |
* |
| 4401 |
* The *flags* are used to indicate the index in *map* for which |
| 4402 |
* the value must be put, masked with **BPF_F_INDEX_MASK**. |
| 4403 |
* Alternatively, *flags* can be set to **BPF_F_CURRENT_CPU** |
| 4404 |
* to indicate that the index of the current CPU core should be |
| 4405 |
* used. |
| 4406 |
* |
| 4407 |
* The value to write, of *size*, is passed through eBPF stack and |
| 4408 |
* pointed by *data*. |
| 4409 |
* |
| 4410 |
* *ctx* is a pointer to in-kernel struct xdp_buff. |
| 4411 |
* |
| 4412 |
* This helper is similar to **bpf_perf_eventoutput**\ () but |
| 4413 |
* restricted to raw_tracepoint bpf programs. |
| 4414 |
* Return |
| 4415 |
* 0 on success, or a negative error in case of failure. |
| 4416 |
* |
| 4417 |
* u64 bpf_get_netns_cookie(void *ctx) |
| 4418 |
* Description |
| 4419 |
* Retrieve the cookie (generated by the kernel) of the network |
| 4420 |
* namespace the input *ctx* is associated with. The network |
| 4421 |
* namespace cookie remains stable for its lifetime and provides |
| 4422 |
* a global identifier that can be assumed unique. If *ctx* is |
| 4423 |
* NULL, then the helper returns the cookie for the initial |
| 4424 |
* network namespace. The cookie itself is very similar to that |
| 4425 |
* of **bpf_get_socket_cookie**\ () helper, but for network |
| 4426 |
* namespaces instead of sockets. |
| 4427 |
* Return |
| 4428 |
* A 8-byte long opaque number. |
| 4429 |
* |
| 4430 |
* u64 bpf_get_current_ancestor_cgroup_id(int ancestor_level) |
| 4431 |
* Description |
| 4432 |
* Return id of cgroup v2 that is ancestor of the cgroup associated |
| 4433 |
* with the current task at the *ancestor_level*. The root cgroup |
| 4434 |
* is at *ancestor_level* zero and each step down the hierarchy |
| 4435 |
* increments the level. If *ancestor_level* == level of cgroup |
| 4436 |
* associated with the current task, then return value will be the |
| 4437 |
* same as that of **bpf_get_current_cgroup_id**\ (). |
| 4438 |
* |
| 4439 |
* The helper is useful to implement policies based on cgroups |
| 4440 |
* that are upper in hierarchy than immediate cgroup associated |
| 4441 |
* with the current task. |
| 4442 |
* |
| 4443 |
* The format of returned id and helper limitations are same as in |
| 4444 |
* **bpf_get_current_cgroup_id**\ (). |
| 4445 |
* Return |
| 4446 |
* The id is returned or 0 in case the id could not be retrieved. |
| 4447 |
* |
| 4448 |
* long bpf_sk_assign(struct sk_buff *skb, void *sk, u64 flags) |
| 4449 |
* Description |
| 4450 |
* Helper is overloaded depending on BPF program type. This |
| 4451 |
* description applies to **BPF_PROG_TYPE_SCHED_CLS** and |
| 4452 |
* **BPF_PROG_TYPE_SCHED_ACT** programs. |
| 4453 |
* |
| 4454 |
* Assign the *sk* to the *skb*. When combined with appropriate |
| 4455 |
* routing configuration to receive the packet towards the socket, |
| 4456 |
* will cause *skb* to be delivered to the specified socket. |
| 4457 |
* Subsequent redirection of *skb* via **bpf_redirect**\ (), |
| 4458 |
* **bpf_clone_redirect**\ () or other methods outside of BPF may |
| 4459 |
* interfere with successful delivery to the socket. |
| 4460 |
* |
| 4461 |
* This operation is only valid from TC ingress path. |
| 4462 |
* |
| 4463 |
* The *flags* argument must be zero. |
| 4464 |
* Return |
| 4465 |
* 0 on success, or a negative error in case of failure: |
| 4466 |
* |
| 4467 |
* **-EINVAL** if specified *flags* are not supported. |
| 4468 |
* |
| 4469 |
* **-ENOENT** if the socket is unavailable for assignment. |
| 4470 |
* |
| 4471 |
* **-ENETUNREACH** if the socket is unreachable (wrong netns). |
| 4472 |
* |
| 4473 |
* **-EOPNOTSUPP** if the operation is not supported, for example |
| 4474 |
* a call from outside of TC ingress. |
| 4475 |
* |
| 4476 |
* long bpf_sk_assign(struct bpf_sk_lookup *ctx, struct bpf_sock *sk, u64 flags) |
| 4477 |
* Description |
| 4478 |
* Helper is overloaded depending on BPF program type. This |
| 4479 |
* description applies to **BPF_PROG_TYPE_SK_LOOKUP** programs. |
| 4480 |
* |
| 4481 |
* Select the *sk* as a result of a socket lookup. |
| 4482 |
* |
| 4483 |
* For the operation to succeed passed socket must be compatible |
| 4484 |
* with the packet description provided by the *ctx* object. |
| 4485 |
* |
| 4486 |
* L4 protocol (**IPPROTO_TCP** or **IPPROTO_UDP**) must |
| 4487 |
* be an exact match. While IP family (**AF_INET** or |
| 4488 |
* **AF_INET6**) must be compatible, that is IPv6 sockets |
| 4489 |
* that are not v6-only can be selected for IPv4 packets. |
| 4490 |
* |
| 4491 |
* Only TCP listeners and UDP unconnected sockets can be |
| 4492 |
* selected. *sk* can also be NULL to reset any previous |
| 4493 |
* selection. |
| 4494 |
* |
| 4495 |
* *flags* argument can combination of following values: |
| 4496 |
* |
| 4497 |
* * **BPF_SK_LOOKUP_F_REPLACE** to override the previous |
| 4498 |
* socket selection, potentially done by a BPF program |
| 4499 |
* that ran before us. |
| 4500 |
* |
| 4501 |
* * **BPF_SK_LOOKUP_F_NO_REUSEPORT** to skip |
| 4502 |
* load-balancing within reuseport group for the socket |
| 4503 |
* being selected. |
| 4504 |
* |
| 4505 |
* On success *ctx->sk* will point to the selected socket. |
| 4506 |
* |
| 4507 |
* Return |
| 4508 |
* 0 on success, or a negative errno in case of failure. |
| 4509 |
* |
| 4510 |
* * **-EAFNOSUPPORT** if socket family (*sk->family*) is |
| 4511 |
* not compatible with packet family (*ctx->family*). |
| 4512 |
* |
| 4513 |
* * **-EEXIST** if socket has been already selected, |
| 4514 |
* potentially by another program, and |
| 4515 |
* **BPF_SK_LOOKUP_F_REPLACE** flag was not specified. |
| 4516 |
* |
| 4517 |
* * **-EINVAL** if unsupported flags were specified. |
| 4518 |
* |
| 4519 |
* * **-EPROTOTYPE** if socket L4 protocol |
| 4520 |
* (*sk->protocol*) doesn't match packet protocol |
| 4521 |
* (*ctx->protocol*). |
| 4522 |
* |
| 4523 |
* * **-ESOCKTNOSUPPORT** if socket is not in allowed |
| 4524 |
* state (TCP listening or UDP unconnected). |
| 4525 |
* |
| 4526 |
* u64 bpf_ktime_get_boot_ns(void) |
| 4527 |
* Description |
| 4528 |
* Return the time elapsed since system boot, in nanoseconds. |
| 4529 |
* Does include the time the system was suspended. |
| 4530 |
* See: **clock_gettime**\ (**CLOCK_BOOTTIME**) |
| 4531 |
* Return |
| 4532 |
* Current *ktime*. |
| 4533 |
* |
| 4534 |
* long bpf_seq_printf(struct seq_file *m, const char *fmt, u32 fmt_size, const void *data, u32 data_len) |
| 4535 |
* Description |
| 4536 |
* **bpf_seq_printf**\ () uses seq_file **seq_printf**\ () to print |
| 4537 |
* out the format string. |
| 4538 |
* The *m* represents the seq_file. The *fmt* and *fmt_size* are for |
| 4539 |
* the format string itself. The *data* and *data_len* are format string |
| 4540 |
* arguments. The *data* are a **u64** array and corresponding format string |
| 4541 |
* values are stored in the array. For strings and pointers where pointees |
| 4542 |
* are accessed, only the pointer values are stored in the *data* array. |
| 4543 |
* The *data_len* is the size of *data* in bytes - must be a multiple of 8. |
| 4544 |
* |
| 4545 |
* Formats **%s**, **%p{i,I}{4,6}** requires to read kernel memory. |
| 4546 |
* Reading kernel memory may fail due to either invalid address or |
| 4547 |
* valid address but requiring a major memory fault. If reading kernel memory |
| 4548 |
* fails, the string for **%s** will be an empty string, and the ip |
| 4549 |
* address for **%p{i,I}{4,6}** will be 0. Not returning error to |
| 4550 |
* bpf program is consistent with what **bpf_trace_printk**\ () does for now. |
| 4551 |
* Return |
| 4552 |
* 0 on success, or a negative error in case of failure: |
| 4553 |
* |
| 4554 |
* **-EBUSY** if per-CPU memory copy buffer is busy, can try again |
| 4555 |
* by returning 1 from bpf program. |
| 4556 |
* |
| 4557 |
* **-EINVAL** if arguments are invalid, or if *fmt* is invalid/unsupported. |
| 4558 |
* |
| 4559 |
* **-E2BIG** if *fmt* contains too many format specifiers. |
| 4560 |
* |
| 4561 |
* **-EOVERFLOW** if an overflow happened: The same object will be tried again. |
| 4562 |
* |
| 4563 |
* long bpf_seq_write(struct seq_file *m, const void *data, u32 len) |
| 4564 |
* Description |
| 4565 |
* **bpf_seq_write**\ () uses seq_file **seq_write**\ () to write the data. |
| 4566 |
* The *m* represents the seq_file. The *data* and *len* represent the |
| 4567 |
* data to write in bytes. |
| 4568 |
* Return |
| 4569 |
* 0 on success, or a negative error in case of failure: |
| 4570 |
* |
| 4571 |
* **-EOVERFLOW** if an overflow happened: The same object will be tried again. |
| 4572 |
* |
| 4573 |
* u64 bpf_sk_cgroup_id(void *sk) |
| 4574 |
* Description |
| 4575 |
* Return the cgroup v2 id of the socket *sk*. |
| 4576 |
* |
| 4577 |
* *sk* must be a non-**NULL** pointer to a socket, e.g. one |
| 4578 |
* returned from **bpf_sk_lookup_xxx**\ (), |
| 4579 |
* **bpf_sk_fullsock**\ (), etc. The format of returned id is |
| 4580 |
* same as in **bpf_skb_cgroup_id**\ (). |
| 4581 |
* |
| 4582 |
* This helper is available only if the kernel was compiled with |
| 4583 |
* the **CONFIG_SOCK_CGROUP_DATA** configuration option. |
| 4584 |
* Return |
| 4585 |
* The id is returned or 0 in case the id could not be retrieved. |
| 4586 |
* |
| 4587 |
* u64 bpf_sk_ancestor_cgroup_id(void *sk, int ancestor_level) |
| 4588 |
* Description |
| 4589 |
* Return id of cgroup v2 that is ancestor of cgroup associated |
| 4590 |
* with the *sk* at the *ancestor_level*. The root cgroup is at |
| 4591 |
* *ancestor_level* zero and each step down the hierarchy |
| 4592 |
* increments the level. If *ancestor_level* == level of cgroup |
| 4593 |
* associated with *sk*, then return value will be same as that |
| 4594 |
* of **bpf_sk_cgroup_id**\ (). |
| 4595 |
* |
| 4596 |
* The helper is useful to implement policies based on cgroups |
| 4597 |
* that are upper in hierarchy than immediate cgroup associated |
| 4598 |
* with *sk*. |
| 4599 |
* |
| 4600 |
* The format of returned id and helper limitations are same as in |
| 4601 |
* **bpf_sk_cgroup_id**\ (). |
| 4602 |
* Return |
| 4603 |
* The id is returned or 0 in case the id could not be retrieved. |
| 4604 |
* |
| 4605 |
* long bpf_ringbuf_output(void *ringbuf, void *data, u64 size, u64 flags) |
| 4606 |
* Description |
| 4607 |
* Copy *size* bytes from *data* into a ring buffer *ringbuf*. |
| 4608 |
* If **BPF_RB_NO_WAKEUP** is specified in *flags*, no notification |
| 4609 |
* of new data availability is sent. |
| 4610 |
* If **BPF_RB_FORCE_WAKEUP** is specified in *flags*, notification |
| 4611 |
* of new data availability is sent unconditionally. |
| 4612 |
* If **0** is specified in *flags*, an adaptive notification |
| 4613 |
* of new data availability is sent. |
| 4614 |
* |
| 4615 |
* An adaptive notification is a notification sent whenever the user-space |
| 4616 |
* process has caught up and consumed all available payloads. In case the user-space |
| 4617 |
* process is still processing a previous payload, then no notification is needed |
| 4618 |
* as it will process the newly added payload automatically. |
| 4619 |
* Return |
| 4620 |
* 0 on success, or a negative error in case of failure. |
| 4621 |
* |
| 4622 |
* void *bpf_ringbuf_reserve(void *ringbuf, u64 size, u64 flags) |
| 4623 |
* Description |
| 4624 |
* Reserve *size* bytes of payload in a ring buffer *ringbuf*. |
| 4625 |
* *flags* must be 0. |
| 4626 |
* Return |
| 4627 |
* Valid pointer with *size* bytes of memory available; NULL, |
| 4628 |
* otherwise. |
| 4629 |
* |
| 4630 |
* void bpf_ringbuf_submit(void *data, u64 flags) |
| 4631 |
* Description |
| 4632 |
* Submit reserved ring buffer sample, pointed to by *data*. |
| 4633 |
* If **BPF_RB_NO_WAKEUP** is specified in *flags*, no notification |
| 4634 |
* of new data availability is sent. |
| 4635 |
* If **BPF_RB_FORCE_WAKEUP** is specified in *flags*, notification |
| 4636 |
* of new data availability is sent unconditionally. |
| 4637 |
* If **0** is specified in *flags*, an adaptive notification |
| 4638 |
* of new data availability is sent. |
| 4639 |
* |
| 4640 |
* See 'bpf_ringbuf_output()' for the definition of adaptive notification. |
| 4641 |
* Return |
| 4642 |
* Nothing. Always succeeds. |
| 4643 |
* |
| 4644 |
* void bpf_ringbuf_discard(void *data, u64 flags) |
| 4645 |
* Description |
| 4646 |
* Discard reserved ring buffer sample, pointed to by *data*. |
| 4647 |
* If **BPF_RB_NO_WAKEUP** is specified in *flags*, no notification |
| 4648 |
* of new data availability is sent. Discarded records remain in |
| 4649 |
* the ring buffer until consumed by user space, so a later submit |
| 4650 |
* using adaptive wakeup might not wake up the consumer. |
| 4651 |
* If **BPF_RB_FORCE_WAKEUP** is specified in *flags*, notification |
| 4652 |
* of new data availability is sent unconditionally. |
| 4653 |
* If **0** is specified in *flags*, an adaptive notification |
| 4654 |
* of new data availability is sent. |
| 4655 |
* |
| 4656 |
* See 'bpf_ringbuf_output()' for the definition of adaptive notification. |
| 4657 |
* Return |
| 4658 |
* Nothing. Always succeeds. |
| 4659 |
* |
| 4660 |
* u64 bpf_ringbuf_query(void *ringbuf, u64 flags) |
| 4661 |
* Description |
| 4662 |
* Query various characteristics of provided ring buffer. What |
| 4663 |
* exactly is queries is determined by *flags*: |
| 4664 |
* |
| 4665 |
* * **BPF_RB_AVAIL_DATA**: Amount of data not yet consumed. |
| 4666 |
* * **BPF_RB_RING_SIZE**: The size of ring buffer. |
| 4667 |
* * **BPF_RB_CONS_POS**: Consumer position (can wrap around). |
| 4668 |
* * **BPF_RB_PROD_POS**: Producer(s) position (can wrap around). |
| 4669 |
* |
| 4670 |
* Data returned is just a momentary snapshot of actual values |
| 4671 |
* and could be inaccurate, so this facility should be used to |
| 4672 |
* power heuristics and for reporting, not to make 100% correct |
| 4673 |
* calculation. |
| 4674 |
* Return |
| 4675 |
* Requested value, or 0, if *flags* are not recognized. |
| 4676 |
* |
| 4677 |
* long bpf_csum_level(struct sk_buff *skb, u64 level) |
| 4678 |
* Description |
| 4679 |
* Change the skbs checksum level by one layer up or down, or |
| 4680 |
* reset it entirely to none in order to have the stack perform |
| 4681 |
* checksum validation. The level is applicable to the following |
| 4682 |
* protocols: TCP, UDP, GRE, SCTP, FCOE. For example, a decap of |
| 4683 |
* | ETH | IP | UDP | GUE | IP | TCP | into | ETH | IP | TCP | |
| 4684 |
* through **bpf_skb_adjust_room**\ () helper with passing in |
| 4685 |
* **BPF_F_ADJ_ROOM_NO_CSUM_RESET** flag would require one call |
| 4686 |
* to **bpf_csum_level**\ () with **BPF_CSUM_LEVEL_DEC** since |
| 4687 |
* the UDP header is removed. Similarly, an encap of the latter |
| 4688 |
* into the former could be accompanied by a helper call to |
| 4689 |
* **bpf_csum_level**\ () with **BPF_CSUM_LEVEL_INC** if the |
| 4690 |
* skb is still intended to be processed in higher layers of the |
| 4691 |
* stack instead of just egressing at tc. |
| 4692 |
* |
| 4693 |
* There are three supported level settings at this time: |
| 4694 |
* |
| 4695 |
* * **BPF_CSUM_LEVEL_INC**: Increases skb->csum_level for skbs |
| 4696 |
* with CHECKSUM_UNNECESSARY. |
| 4697 |
* * **BPF_CSUM_LEVEL_DEC**: Decreases skb->csum_level for skbs |
| 4698 |
* with CHECKSUM_UNNECESSARY. |
| 4699 |
* * **BPF_CSUM_LEVEL_RESET**: Resets skb->csum_level to 0 and |
| 4700 |
* sets CHECKSUM_NONE to force checksum validation by the stack. |
| 4701 |
* * **BPF_CSUM_LEVEL_QUERY**: No-op, returns the current |
| 4702 |
* skb->csum_level. |
| 4703 |
* Return |
| 4704 |
* 0 on success, or a negative error in case of failure. In the |
| 4705 |
* case of **BPF_CSUM_LEVEL_QUERY**, the current skb->csum_level |
| 4706 |
* is returned or the error code -EACCES in case the skb is not |
| 4707 |
* subject to CHECKSUM_UNNECESSARY. |
| 4708 |
* |
| 4709 |
* struct tcp6_sock *bpf_skc_to_tcp6_sock(void *sk) |
| 4710 |
* Description |
| 4711 |
* Dynamically cast a *sk* pointer to a *tcp6_sock* pointer. |
| 4712 |
* Return |
| 4713 |
* *sk* if casting is valid, or **NULL** otherwise. |
| 4714 |
* |
| 4715 |
* struct tcp_sock *bpf_skc_to_tcp_sock(void *sk) |
| 4716 |
* Description |
| 4717 |
* Dynamically cast a *sk* pointer to a *tcp_sock* pointer. |
| 4718 |
* Return |
| 4719 |
* *sk* if casting is valid, or **NULL** otherwise. |
| 4720 |
* |
| 4721 |
* struct tcp_timewait_sock *bpf_skc_to_tcp_timewait_sock(void *sk) |
| 4722 |
* Description |
| 4723 |
* Dynamically cast a *sk* pointer to a *tcp_timewait_sock* pointer. |
| 4724 |
* Return |
| 4725 |
* *sk* if casting is valid, or **NULL** otherwise. |
| 4726 |
* |
| 4727 |
* struct tcp_request_sock *bpf_skc_to_tcp_request_sock(void *sk) |
| 4728 |
* Description |
| 4729 |
* Dynamically cast a *sk* pointer to a *tcp_request_sock* pointer. |
| 4730 |
* Return |
| 4731 |
* *sk* if casting is valid, or **NULL** otherwise. |
| 4732 |
* |
| 4733 |
* struct udp6_sock *bpf_skc_to_udp6_sock(void *sk) |
| 4734 |
* Description |
| 4735 |
* Dynamically cast a *sk* pointer to a *udp6_sock* pointer. |
| 4736 |
* Return |
| 4737 |
* *sk* if casting is valid, or **NULL** otherwise. |
| 4738 |
* |
| 4739 |
* long bpf_get_task_stack(struct task_struct *task, void *buf, u32 size, u64 flags) |
| 4740 |
* Description |
| 4741 |
* Return a user or a kernel stack in bpf program provided buffer. |
| 4742 |
* Note: the user stack will only be populated if the *task* is |
| 4743 |
* the current task; all other tasks will return -EOPNOTSUPP. |
| 4744 |
* To achieve this, the helper needs *task*, which is a valid |
| 4745 |
* pointer to **struct task_struct**. To store the stacktrace, the |
| 4746 |
* bpf program provides *buf* with a nonnegative *size*. |
| 4747 |
* |
| 4748 |
* The last argument, *flags*, holds the number of stack frames to |
| 4749 |
* skip (from 0 to 255), masked with |
| 4750 |
* **BPF_F_SKIP_FIELD_MASK**. The next bits can be used to set |
| 4751 |
* the following flags: |
| 4752 |
* |
| 4753 |
* **BPF_F_USER_STACK** |
| 4754 |
* Collect a user space stack instead of a kernel stack. |
| 4755 |
* The *task* must be the current task. |
| 4756 |
* **BPF_F_USER_BUILD_ID** |
| 4757 |
* Collect buildid+offset instead of ips for user stack, |
| 4758 |
* only valid if **BPF_F_USER_STACK** is also specified. |
| 4759 |
* |
| 4760 |
* **bpf_get_task_stack**\ () can collect up to |
| 4761 |
* **PERF_MAX_STACK_DEPTH** both kernel and user frames, subject |
| 4762 |
* to sufficient large buffer size. Note that |
| 4763 |
* this limit can be controlled with the **sysctl** program, and |
| 4764 |
* that it should be manually increased in order to profile long |
| 4765 |
* user stacks (such as stacks for Java programs). To do so, use: |
| 4766 |
* |
| 4767 |
* :: |
| 4768 |
* |
| 4769 |
* # sysctl kernel.perf_event_max_stack=<new value> |
| 4770 |
* Return |
| 4771 |
* The non-negative copied *buf* length equal to or less than |
| 4772 |
* *size* on success, or a negative error in case of failure. |
| 4773 |
* |
| 4774 |
* long bpf_load_hdr_opt(struct bpf_sock_ops *skops, void *searchby_res, u32 len, u64 flags) |
| 4775 |
* Description |
| 4776 |
* Load header option. Support reading a particular TCP header |
| 4777 |
* option for bpf program (**BPF_PROG_TYPE_SOCK_OPS**). |
| 4778 |
* |
| 4779 |
* If *flags* is 0, it will search the option from the |
| 4780 |
* *skops*\ **->skb_data**. The comment in **struct bpf_sock_ops** |
| 4781 |
* has details on what skb_data contains under different |
| 4782 |
* *skops*\ **->op**. |
| 4783 |
* |
| 4784 |
* The first byte of the *searchby_res* specifies the |
| 4785 |
* kind that it wants to search. |
| 4786 |
* |
| 4787 |
* If the searching kind is an experimental kind |
| 4788 |
* (i.e. 253 or 254 according to RFC6994). It also |
| 4789 |
* needs to specify the "magic" which is either |
| 4790 |
* 2 bytes or 4 bytes. It then also needs to |
| 4791 |
* specify the size of the magic by using |
| 4792 |
* the 2nd byte which is "kind-length" of a TCP |
| 4793 |
* header option and the "kind-length" also |
| 4794 |
* includes the first 2 bytes "kind" and "kind-length" |
| 4795 |
* itself as a normal TCP header option also does. |
| 4796 |
* |
| 4797 |
* For example, to search experimental kind 254 with |
| 4798 |
* 2 byte magic 0xeB9F, the searchby_res should be |
| 4799 |
* [ 254, 4, 0xeB, 0x9F, 0, 0, .... 0 ]. |
| 4800 |
* |
| 4801 |
* To search for the standard window scale option (3), |
| 4802 |
* the *searchby_res* should be [ 3, 0, 0, .... 0 ]. |
| 4803 |
* Note, kind-length must be 0 for regular option. |
| 4804 |
* |
| 4805 |
* Searching for No-Op (0) and End-of-Option-List (1) are |
| 4806 |
* not supported. |
| 4807 |
* |
| 4808 |
* *len* must be at least 2 bytes which is the minimal size |
| 4809 |
* of a header option. |
| 4810 |
* |
| 4811 |
* Supported flags: |
| 4812 |
* |
| 4813 |
* * **BPF_LOAD_HDR_OPT_TCP_SYN** to search from the |
| 4814 |
* saved_syn packet or the just-received syn packet. |
| 4815 |
* |
| 4816 |
* Return |
| 4817 |
* > 0 when found, the header option is copied to *searchby_res*. |
| 4818 |
* The return value is the total length copied. On failure, a |
| 4819 |
* negative error code is returned: |
| 4820 |
* |
| 4821 |
* **-EINVAL** if a parameter is invalid. |
| 4822 |
* |
| 4823 |
* **-ENOMSG** if the option is not found. |
| 4824 |
* |
| 4825 |
* **-ENOENT** if no syn packet is available when |
| 4826 |
* **BPF_LOAD_HDR_OPT_TCP_SYN** is used. |
| 4827 |
* |
| 4828 |
* **-ENOSPC** if there is not enough space. Only *len* number of |
| 4829 |
* bytes are copied. |
| 4830 |
* |
| 4831 |
* **-EFAULT** on failure to parse the header options in the |
| 4832 |
* packet. |
| 4833 |
* |
| 4834 |
* **-EPERM** if the helper cannot be used under the current |
| 4835 |
* *skops*\ **->op**. |
| 4836 |
* |
| 4837 |
* long bpf_store_hdr_opt(struct bpf_sock_ops *skops, const void *from, u32 len, u64 flags) |
| 4838 |
* Description |
| 4839 |
* Store header option. The data will be copied |
| 4840 |
* from buffer *from* with length *len* to the TCP header. |
| 4841 |
* |
| 4842 |
* The buffer *from* should have the whole option that |
| 4843 |
* includes the kind, kind-length, and the actual |
| 4844 |
* option data. The *len* must be at least kind-length |
| 4845 |
* long. The kind-length does not have to be 4 byte |
| 4846 |
* aligned. The kernel will take care of the padding |
| 4847 |
* and setting the 4 bytes aligned value to th->doff. |
| 4848 |
* |
| 4849 |
* This helper will check for duplicated option |
| 4850 |
* by searching the same option in the outgoing skb. |
| 4851 |
* |
| 4852 |
* This helper can only be called during |
| 4853 |
* **BPF_SOCK_OPS_WRITE_HDR_OPT_CB**. |
| 4854 |
* |
| 4855 |
* Return |
| 4856 |
* 0 on success, or negative error in case of failure: |
| 4857 |
* |
| 4858 |
* **-EINVAL** If param is invalid. |
| 4859 |
* |
| 4860 |
* **-ENOSPC** if there is not enough space in the header. |
| 4861 |
* Nothing has been written |
| 4862 |
* |
| 4863 |
* **-EEXIST** if the option already exists. |
| 4864 |
* |
| 4865 |
* **-EFAULT** on failure to parse the existing header options. |
| 4866 |
* |
| 4867 |
* **-EPERM** if the helper cannot be used under the current |
| 4868 |
* *skops*\ **->op**. |
| 4869 |
* |
| 4870 |
* long bpf_reserve_hdr_opt(struct bpf_sock_ops *skops, u32 len, u64 flags) |
| 4871 |
* Description |
| 4872 |
* Reserve *len* bytes for the bpf header option. The |
| 4873 |
* space will be used by **bpf_store_hdr_opt**\ () later in |
| 4874 |
* **BPF_SOCK_OPS_WRITE_HDR_OPT_CB**. |
| 4875 |
* |
| 4876 |
* If **bpf_reserve_hdr_opt**\ () is called multiple times, |
| 4877 |
* the total number of bytes will be reserved. |
| 4878 |
* |
| 4879 |
* This helper can only be called during |
| 4880 |
* **BPF_SOCK_OPS_HDR_OPT_LEN_CB**. |
| 4881 |
* |
| 4882 |
* Return |
| 4883 |
* 0 on success, or negative error in case of failure: |
| 4884 |
* |
| 4885 |
* **-EINVAL** if a parameter is invalid. |
| 4886 |
* |
| 4887 |
* **-ENOSPC** if there is not enough space in the header. |
| 4888 |
* |
| 4889 |
* **-EPERM** if the helper cannot be used under the current |
| 4890 |
* *skops*\ **->op**. |
| 4891 |
* |
| 4892 |
* void *bpf_inode_storage_get(struct bpf_map *map, void *inode, void *value, u64 flags) |
| 4893 |
* Description |
| 4894 |
* Get a bpf_local_storage from an *inode*. |
| 4895 |
* |
| 4896 |
* Logically, it could be thought of as getting the value from |
| 4897 |
* a *map* with *inode* as the **key**. From this |
| 4898 |
* perspective, the usage is not much different from |
| 4899 |
* **bpf_map_lookup_elem**\ (*map*, **&**\ *inode*) except this |
| 4900 |
* helper enforces the key must be an inode and the map must also |
| 4901 |
* be a **BPF_MAP_TYPE_INODE_STORAGE**. |
| 4902 |
* |
| 4903 |
* Underneath, the value is stored locally at *inode* instead of |
| 4904 |
* the *map*. The *map* is used as the bpf-local-storage |
| 4905 |
* "type". The bpf-local-storage "type" (i.e. the *map*) is |
| 4906 |
* searched against all bpf_local_storage residing at *inode*. |
| 4907 |
* |
| 4908 |
* An optional *flags* (**BPF_LOCAL_STORAGE_GET_F_CREATE**) can be |
| 4909 |
* used such that a new bpf_local_storage will be |
| 4910 |
* created if one does not exist. *value* can be used |
| 4911 |
* together with **BPF_LOCAL_STORAGE_GET_F_CREATE** to specify |
| 4912 |
* the initial value of a bpf_local_storage. If *value* is |
| 4913 |
* **NULL**, the new bpf_local_storage will be zero initialized. |
| 4914 |
* Return |
| 4915 |
* A bpf_local_storage pointer is returned on success. |
| 4916 |
* |
| 4917 |
* **NULL** if not found or there was an error in adding |
| 4918 |
* a new bpf_local_storage. |
| 4919 |
* |
| 4920 |
* int bpf_inode_storage_delete(struct bpf_map *map, void *inode) |
| 4921 |
* Description |
| 4922 |
* Delete a bpf_local_storage from an *inode*. |
| 4923 |
* Return |
| 4924 |
* 0 on success. |
| 4925 |
* |
| 4926 |
* **-ENOENT** if the bpf_local_storage cannot be found. |
| 4927 |
* |
| 4928 |
* long bpf_d_path(const struct path *path, char *buf, u32 sz) |
| 4929 |
* Description |
| 4930 |
* Return full path for given **struct path** object, which |
| 4931 |
* needs to be the kernel BTF *path* object. The path is |
| 4932 |
* returned in the provided buffer *buf* of size *sz* and |
| 4933 |
* is zero terminated. |
| 4934 |
* |
| 4935 |
* Return |
| 4936 |
* On success, the strictly positive length of the string, |
| 4937 |
* including the trailing NUL character. On error, a negative |
| 4938 |
* value. |
| 4939 |
* |
| 4940 |
* long bpf_copy_from_user(void *dst, u32 size, const void *user_ptr) |
| 4941 |
* Description |
| 4942 |
* Read *size* bytes from user space address *user_ptr* and store |
| 4943 |
* the data in *dst*. This is a wrapper of **copy_from_user**\ (). |
| 4944 |
* Return |
| 4945 |
* 0 on success, or a negative error in case of failure. |
| 4946 |
* |
| 4947 |
* long bpf_snprintf_btf(char *str, u32 str_size, struct btf_ptr *ptr, u32 btf_ptr_size, u64 flags) |
| 4948 |
* Description |
| 4949 |
* Use BTF to store a string representation of *ptr*->ptr in *str*, |
| 4950 |
* using *ptr*->type_id. This value should specify the type |
| 4951 |
* that *ptr*->ptr points to. LLVM __builtin_btf_type_id(type, 1) |
| 4952 |
* can be used to look up vmlinux BTF type ids. Traversing the |
| 4953 |
* data structure using BTF, the type information and values are |
| 4954 |
* stored in the first *str_size* - 1 bytes of *str*. Safe copy of |
| 4955 |
* the pointer data is carried out to avoid kernel crashes during |
| 4956 |
* operation. Smaller types can use string space on the stack; |
| 4957 |
* larger programs can use map data to store the string |
| 4958 |
* representation. |
| 4959 |
* |
| 4960 |
* The string can be subsequently shared with userspace via |
| 4961 |
* bpf_perf_event_output() or ring buffer interfaces. |
| 4962 |
* bpf_trace_printk() is to be avoided as it places too small |
| 4963 |
* a limit on string size to be useful. |
| 4964 |
* |
| 4965 |
* *flags* is a combination of |
| 4966 |
* |
| 4967 |
* **BTF_F_COMPACT** |
| 4968 |
* no formatting around type information |
| 4969 |
* **BTF_F_NONAME** |
| 4970 |
* no struct/union member names/types |
| 4971 |
* **BTF_F_PTR_RAW** |
| 4972 |
* show raw (unobfuscated) pointer values; |
| 4973 |
* equivalent to printk specifier %px. |
| 4974 |
* **BTF_F_ZERO** |
| 4975 |
* show zero-valued struct/union members; they |
| 4976 |
* are not displayed by default |
| 4977 |
* |
| 4978 |
* Return |
| 4979 |
* The number of bytes that were written (or would have been |
| 4980 |
* written if output had to be truncated due to string size), |
| 4981 |
* or a negative error in cases of failure. |
| 4982 |
* |
| 4983 |
* long bpf_seq_printf_btf(struct seq_file *m, struct btf_ptr *ptr, u32 ptr_size, u64 flags) |
| 4984 |
* Description |
| 4985 |
* Use BTF to write to seq_write a string representation of |
| 4986 |
* *ptr*->ptr, using *ptr*->type_id as per bpf_snprintf_btf(). |
| 4987 |
* *flags* are identical to those used for bpf_snprintf_btf. |
| 4988 |
* Return |
| 4989 |
* 0 on success or a negative error in case of failure. |
| 4990 |
* |
| 4991 |
* u64 bpf_skb_cgroup_classid(struct sk_buff *skb) |
| 4992 |
* Description |
| 4993 |
* See **bpf_get_cgroup_classid**\ () for the main description. |
| 4994 |
* This helper differs from **bpf_get_cgroup_classid**\ () in that |
| 4995 |
* the cgroup v1 net_cls class is retrieved only from the *skb*'s |
| 4996 |
* associated socket instead of the current process. |
| 4997 |
* Return |
| 4998 |
* The id is returned or 0 in case the id could not be retrieved. |
| 4999 |
* |
| 5000 |
* long bpf_redirect_neigh(u32 ifindex, struct bpf_redir_neigh *params, int plen, u64 flags) |
| 5001 |
* Description |
| 5002 |
* Redirect the packet to another net device of index *ifindex* |
| 5003 |
* and fill in L2 addresses from neighboring subsystem. This helper |
| 5004 |
* is somewhat similar to **bpf_redirect**\ (), except that it |
| 5005 |
* populates L2 addresses as well, meaning, internally, the helper |
| 5006 |
* relies on the neighbor lookup for the L2 address of the nexthop. |
| 5007 |
* |
| 5008 |
* The helper will perform a FIB lookup based on the skb's |
| 5009 |
* networking header to get the address of the next hop, unless |
| 5010 |
* this is supplied by the caller in the *params* argument. The |
| 5011 |
* *plen* argument indicates the len of *params* and should be set |
| 5012 |
* to 0 if *params* is NULL. |
| 5013 |
* |
| 5014 |
* The *flags* argument is reserved and must be 0. The helper is |
| 5015 |
* currently only supported for tc BPF program types, and enabled |
| 5016 |
* for IPv4 and IPv6 protocols. |
| 5017 |
* Return |
| 5018 |
* The helper returns **TC_ACT_REDIRECT** on success or |
| 5019 |
* **TC_ACT_SHOT** on error. |
| 5020 |
* |
| 5021 |
* void *bpf_per_cpu_ptr(const void *percpu_ptr, u32 cpu) |
| 5022 |
* Description |
| 5023 |
* Take a pointer to a percpu ksym, *percpu_ptr*, and return a |
| 5024 |
* pointer to the percpu kernel variable on *cpu*. A ksym is an |
| 5025 |
* extern variable decorated with '__ksym'. For ksym, there is a |
| 5026 |
* global var (either static or global) defined of the same name |
| 5027 |
* in the kernel. The ksym is percpu if the global var is percpu. |
| 5028 |
* The returned pointer points to the global percpu var on *cpu*. |
| 5029 |
* |
| 5030 |
* bpf_per_cpu_ptr() has the same semantic as per_cpu_ptr() in the |
| 5031 |
* kernel, except that bpf_per_cpu_ptr() may return NULL. This |
| 5032 |
* happens if *cpu* is larger than nr_cpu_ids. The caller of |
| 5033 |
* bpf_per_cpu_ptr() must check the returned value. |
| 5034 |
* Return |
| 5035 |
* A pointer pointing to the kernel percpu variable on *cpu*, or |
| 5036 |
* NULL, if *cpu* is invalid. |
| 5037 |
* |
| 5038 |
* void *bpf_this_cpu_ptr(const void *percpu_ptr) |
| 5039 |
* Description |
| 5040 |
* Take a pointer to a percpu ksym, *percpu_ptr*, and return a |
| 5041 |
* pointer to the percpu kernel variable on this cpu. See the |
| 5042 |
* description of 'ksym' in **bpf_per_cpu_ptr**\ (). |
| 5043 |
* |
| 5044 |
* bpf_this_cpu_ptr() has the same semantic as this_cpu_ptr() in |
| 5045 |
* the kernel. Different from **bpf_per_cpu_ptr**\ (), it would |
| 5046 |
* never return NULL. |
| 5047 |
* Return |
| 5048 |
* A pointer pointing to the kernel percpu variable on this cpu. |
| 5049 |
* |
| 5050 |
* long bpf_redirect_peer(u32 ifindex, u64 flags) |
| 5051 |
* Description |
| 5052 |
* Redirect the packet to another net device of index *ifindex*. |
| 5053 |
* This helper is somewhat similar to **bpf_redirect**\ (), except |
| 5054 |
* that the redirection happens to the *ifindex*' peer device and |
| 5055 |
* the netns switch takes place from ingress to ingress without |
| 5056 |
* going through the CPU's backlog queue. |
| 5057 |
* |
| 5058 |
* *skb*\ **->mark** and *skb*\ **->tstamp** are not cleared during |
| 5059 |
* the netns switch. |
| 5060 |
* |
| 5061 |
* The *flags* argument is reserved and must be 0. The helper is |
| 5062 |
* currently only supported for tc BPF program types at the |
| 5063 |
* ingress hook and for veth and netkit target device types. The |
| 5064 |
* peer device must reside in a different network namespace. |
| 5065 |
* Return |
| 5066 |
* The helper returns **TC_ACT_REDIRECT** on success or |
| 5067 |
* **TC_ACT_SHOT** on error. |
| 5068 |
* |
| 5069 |
* void *bpf_task_storage_get(struct bpf_map *map, struct task_struct *task, void *value, u64 flags) |
| 5070 |
* Description |
| 5071 |
* Get a bpf_local_storage from the *task*. |
| 5072 |
* |
| 5073 |
* Logically, it could be thought of as getting the value from |
| 5074 |
* a *map* with *task* as the **key**. From this |
| 5075 |
* perspective, the usage is not much different from |
| 5076 |
* **bpf_map_lookup_elem**\ (*map*, **&**\ *task*) except this |
| 5077 |
* helper enforces the key must be a task_struct and the map must also |
| 5078 |
* be a **BPF_MAP_TYPE_TASK_STORAGE**. |
| 5079 |
* |
| 5080 |
* Underneath, the value is stored locally at *task* instead of |
| 5081 |
* the *map*. The *map* is used as the bpf-local-storage |
| 5082 |
* "type". The bpf-local-storage "type" (i.e. the *map*) is |
| 5083 |
* searched against all bpf_local_storage residing at *task*. |
| 5084 |
* |
| 5085 |
* An optional *flags* (**BPF_LOCAL_STORAGE_GET_F_CREATE**) can be |
| 5086 |
* used such that a new bpf_local_storage will be |
| 5087 |
* created if one does not exist. *value* can be used |
| 5088 |
* together with **BPF_LOCAL_STORAGE_GET_F_CREATE** to specify |
| 5089 |
* the initial value of a bpf_local_storage. If *value* is |
| 5090 |
* **NULL**, the new bpf_local_storage will be zero initialized. |
| 5091 |
* Return |
| 5092 |
* A bpf_local_storage pointer is returned on success. |
| 5093 |
* |
| 5094 |
* **NULL** if not found or there was an error in adding |
| 5095 |
* a new bpf_local_storage. |
| 5096 |
* |
| 5097 |
* long bpf_task_storage_delete(struct bpf_map *map, struct task_struct *task) |
| 5098 |
* Description |
| 5099 |
* Delete a bpf_local_storage from a *task*. |
| 5100 |
* Return |
| 5101 |
* 0 on success. |
| 5102 |
* |
| 5103 |
* **-ENOENT** if the bpf_local_storage cannot be found. |
| 5104 |
* |
| 5105 |
* struct task_struct *bpf_get_current_task_btf(void) |
| 5106 |
* Description |
| 5107 |
* Return a BTF pointer to the "current" task. |
| 5108 |
* This pointer can also be used in helpers that accept an |
| 5109 |
* *ARG_PTR_TO_BTF_ID* of type *task_struct*. |
| 5110 |
* Return |
| 5111 |
* Pointer to the current task. |
| 5112 |
* |
| 5113 |
* long bpf_bprm_opts_set(struct linux_binprm *bprm, u64 flags) |
| 5114 |
* Description |
| 5115 |
* Set or clear certain options on *bprm*: |
| 5116 |
* |
| 5117 |
* **BPF_F_BPRM_SECUREEXEC** Set the secureexec bit |
| 5118 |
* which sets the **AT_SECURE** auxv for glibc. The bit |
| 5119 |
* is cleared if the flag is not specified. |
| 5120 |
* Return |
| 5121 |
* **-EINVAL** if invalid *flags* are passed, zero otherwise. |
| 5122 |
* |
| 5123 |
* u64 bpf_ktime_get_coarse_ns(void) |
| 5124 |
* Description |
| 5125 |
* Return a coarse-grained version of the time elapsed since |
| 5126 |
* system boot, in nanoseconds. Does not include time the system |
| 5127 |
* was suspended. |
| 5128 |
* |
| 5129 |
* See: **clock_gettime**\ (**CLOCK_MONOTONIC_COARSE**) |
| 5130 |
* Return |
| 5131 |
* Current *ktime*. |
| 5132 |
* |
| 5133 |
* long bpf_ima_inode_hash(struct inode *inode, void *dst, u32 size) |
| 5134 |
* Description |
| 5135 |
* Returns the stored IMA hash of the *inode* (if it's available). |
| 5136 |
* If the hash is larger than *size*, then only *size* |
| 5137 |
* bytes will be copied to *dst* |
| 5138 |
* Return |
| 5139 |
* The **hash_algo** is returned on success, |
| 5140 |
* **-EOPNOTSUPP** if IMA is disabled or **-EINVAL** if |
| 5141 |
* invalid arguments are passed. |
| 5142 |
* |
| 5143 |
* struct socket *bpf_sock_from_file(struct file *file) |
| 5144 |
* Description |
| 5145 |
* If the given file represents a socket, returns the associated |
| 5146 |
* socket. |
| 5147 |
* Return |
| 5148 |
* A pointer to a struct socket on success or NULL if the file is |
| 5149 |
* not a socket. |
| 5150 |
* |
| 5151 |
* long bpf_check_mtu(void *ctx, u32 ifindex, u32 *mtu_len, s32 len_diff, u64 flags) |
| 5152 |
* Description |
| 5153 |
* Check packet size against exceeding MTU of net device (based |
| 5154 |
* on *ifindex*). This helper will likely be used in combination |
| 5155 |
* with helpers that adjust/change the packet size. |
| 5156 |
* |
| 5157 |
* The argument *len_diff* can be used for querying with a planned |
| 5158 |
* size change. This allows to check MTU prior to changing packet |
| 5159 |
* ctx. Providing a *len_diff* adjustment that is larger than the |
| 5160 |
* actual packet size (resulting in negative packet size) will in |
| 5161 |
* principle not exceed the MTU, which is why it is not considered |
| 5162 |
* a failure. Other BPF helpers are needed for performing the |
| 5163 |
* planned size change; therefore the responsibility for catching |
| 5164 |
* a negative packet size belongs in those helpers. |
| 5165 |
* |
| 5166 |
* Specifying *ifindex* zero means the MTU check is performed |
| 5167 |
* against the current net device. This is practical if this isn't |
| 5168 |
* used prior to redirect. |
| 5169 |
* |
| 5170 |
* On input *mtu_len* must be a valid pointer, else verifier will |
| 5171 |
* reject BPF program. If the value *mtu_len* is initialized to |
| 5172 |
* zero then the ctx packet size is use. When value *mtu_len* is |
| 5173 |
* provided as input this specify the L3 length that the MTU check |
| 5174 |
* is done against. Remember XDP and TC length operate at L2, but |
| 5175 |
* this value is L3 as this correlate to MTU and IP-header tot_len |
| 5176 |
* values which are L3 (similar behavior as bpf_fib_lookup). |
| 5177 |
* |
| 5178 |
* The Linux kernel route table can configure MTUs on a more |
| 5179 |
* specific per route level, which is not provided by this helper. |
| 5180 |
* For route level MTU checks use the **bpf_fib_lookup**\ () |
| 5181 |
* helper. |
| 5182 |
* |
| 5183 |
* *ctx* is either **struct xdp_md** for XDP programs or |
| 5184 |
* **struct sk_buff** for tc cls_act programs. |
| 5185 |
* |
| 5186 |
* The *flags* argument can be a combination of one or more of the |
| 5187 |
* following values: |
| 5188 |
* |
| 5189 |
* **BPF_MTU_CHK_SEGS** |
| 5190 |
* This flag will only works for *ctx* **struct sk_buff**. |
| 5191 |
* If packet context contains extra packet segment buffers |
| 5192 |
* (often knows as GSO skb), then MTU check is harder to |
| 5193 |
* check at this point, because in transmit path it is |
| 5194 |
* possible for the skb packet to get re-segmented |
| 5195 |
* (depending on net device features). This could still be |
| 5196 |
* a MTU violation, so this flag enables performing MTU |
| 5197 |
* check against segments, with a different violation |
| 5198 |
* return code to tell it apart. Check cannot use len_diff. |
| 5199 |
* |
| 5200 |
* On return *mtu_len* pointer contains the MTU value of the net |
| 5201 |
* device. Remember the net device configured MTU is the L3 size, |
| 5202 |
* which is returned here and XDP and TC length operate at L2. |
| 5203 |
* Helper take this into account for you, but remember when using |
| 5204 |
* MTU value in your BPF-code. |
| 5205 |
* |
| 5206 |
* Return |
| 5207 |
* * 0 on success, and populate MTU value in *mtu_len* pointer. |
| 5208 |
* |
| 5209 |
* * < 0 if any input argument is invalid (*mtu_len* not updated) |
| 5210 |
* |
| 5211 |
* MTU violations return positive values, but also populate MTU |
| 5212 |
* value in *mtu_len* pointer, as this can be needed for |
| 5213 |
* implementing PMTU handing: |
| 5214 |
* |
| 5215 |
* * **BPF_MTU_CHK_RET_FRAG_NEEDED** |
| 5216 |
* * **BPF_MTU_CHK_RET_SEGS_TOOBIG** |
| 5217 |
* |
| 5218 |
* long bpf_for_each_map_elem(struct bpf_map *map, void *callback_fn, void *callback_ctx, u64 flags) |
| 5219 |
* Description |
| 5220 |
* For each element in **map**, call **callback_fn** function with |
| 5221 |
* **map**, **callback_ctx** and other map-specific parameters. |
| 5222 |
* The **callback_fn** should be a static function and |
| 5223 |
* the **callback_ctx** should be a pointer to the stack. |
| 5224 |
* The **flags** is used to control certain aspects of the helper. |
| 5225 |
* Currently, the **flags** must be 0. |
| 5226 |
* |
| 5227 |
* The following are a list of supported map types and their |
| 5228 |
* respective expected callback signatures: |
| 5229 |
* |
| 5230 |
* BPF_MAP_TYPE_HASH, BPF_MAP_TYPE_PERCPU_HASH, |
| 5231 |
* BPF_MAP_TYPE_LRU_HASH, BPF_MAP_TYPE_LRU_PERCPU_HASH, |
| 5232 |
* BPF_MAP_TYPE_ARRAY, BPF_MAP_TYPE_PERCPU_ARRAY |
| 5233 |
* |
| 5234 |
* long (\*callback_fn)(struct bpf_map \*map, const void \*key, void \*value, void \*ctx); |
| 5235 |
* |
| 5236 |
* For per_cpu maps, the map_value is the value on the cpu where the |
| 5237 |
* bpf_prog is running. |
| 5238 |
* |
| 5239 |
* If **callback_fn** return 0, the helper will continue to the next |
| 5240 |
* element. If return value is 1, the helper will skip the rest of |
| 5241 |
* elements and return. Other return values are not used now. |
| 5242 |
* |
| 5243 |
* Return |
| 5244 |
* The number of traversed map elements for success, **-EINVAL** for |
| 5245 |
* invalid **flags**. |
| 5246 |
* |
| 5247 |
* long bpf_snprintf(char *str, u32 str_size, const char *fmt, u64 *data, u32 data_len) |
| 5248 |
* Description |
| 5249 |
* Outputs a string into the **str** buffer of size **str_size** |
| 5250 |
* based on a format string stored in a read-only map pointed by |
| 5251 |
* **fmt**. |
| 5252 |
* |
| 5253 |
* Each format specifier in **fmt** corresponds to one u64 element |
| 5254 |
* in the **data** array. For strings and pointers where pointees |
| 5255 |
* are accessed, only the pointer values are stored in the *data* |
| 5256 |
* array. The *data_len* is the size of *data* in bytes - must be |
| 5257 |
* a multiple of 8. |
| 5258 |
* |
| 5259 |
* Formats **%s** and **%p{i,I}{4,6}** require to read kernel |
| 5260 |
* memory. Reading kernel memory may fail due to either invalid |
| 5261 |
* address or valid address but requiring a major memory fault. If |
| 5262 |
* reading kernel memory fails, the string for **%s** will be an |
| 5263 |
* empty string, and the ip address for **%p{i,I}{4,6}** will be 0. |
| 5264 |
* Not returning error to bpf program is consistent with what |
| 5265 |
* **bpf_trace_printk**\ () does for now. |
| 5266 |
* |
| 5267 |
* Return |
| 5268 |
* The strictly positive length of the formatted string, including |
| 5269 |
* the trailing zero character. If the return value is greater than |
| 5270 |
* **str_size**, **str** contains a truncated string, guaranteed to |
| 5271 |
* be zero-terminated except when **str_size** is 0. |
| 5272 |
* |
| 5273 |
* Or **-EBUSY** if the per-CPU memory copy buffer is busy. |
| 5274 |
* |
| 5275 |
* long bpf_sys_bpf(u32 cmd, void *attr, u32 attr_size) |
| 5276 |
* Description |
| 5277 |
* Execute bpf syscall with given arguments. |
| 5278 |
* Return |
| 5279 |
* A syscall result. |
| 5280 |
* |
| 5281 |
* long bpf_btf_find_by_name_kind(char *name, int name_sz, u32 kind, int flags) |
| 5282 |
* Description |
| 5283 |
* Find BTF type with given name and kind in vmlinux BTF or in module's BTFs. |
| 5284 |
* Return |
| 5285 |
* Returns btf_id and btf_obj_fd in lower and upper 32 bits. |
| 5286 |
* |
| 5287 |
* long bpf_sys_close(u32 fd) |
| 5288 |
* Description |
| 5289 |
* Execute close syscall for given FD. |
| 5290 |
* Return |
| 5291 |
* A syscall result. |
| 5292 |
* |
| 5293 |
* long bpf_timer_init(struct bpf_timer *timer, struct bpf_map *map, u64 flags) |
| 5294 |
* Description |
| 5295 |
* Initialize the timer. |
| 5296 |
* First 4 bits of *flags* specify clockid. |
| 5297 |
* Only CLOCK_MONOTONIC, CLOCK_REALTIME, CLOCK_BOOTTIME are allowed. |
| 5298 |
* All other bits of *flags* are reserved. |
| 5299 |
* The verifier will reject the program if *timer* is not from |
| 5300 |
* the same *map*. |
| 5301 |
* Return |
| 5302 |
* 0 on success. |
| 5303 |
* **-EBUSY** if *timer* is already initialized. |
| 5304 |
* **-EINVAL** if invalid *flags* are passed. |
| 5305 |
* **-EPERM** if *timer* is in a map that doesn't have any user references. |
| 5306 |
* The user space should either hold a file descriptor to a map with timers |
| 5307 |
* or pin such map in bpffs. When map is unpinned or file descriptor is |
| 5308 |
* closed all timers in the map will be cancelled and freed. |
| 5309 |
* |
| 5310 |
* long bpf_timer_set_callback(struct bpf_timer *timer, void *callback_fn) |
| 5311 |
* Description |
| 5312 |
* Configure the timer to call *callback_fn* static function. |
| 5313 |
* Return |
| 5314 |
* 0 on success. |
| 5315 |
* **-EINVAL** if *timer* was not initialized with bpf_timer_init() earlier. |
| 5316 |
* **-EPERM** if *timer* is in a map that doesn't have any user references. |
| 5317 |
* The user space should either hold a file descriptor to a map with timers |
| 5318 |
* or pin such map in bpffs. When map is unpinned or file descriptor is |
| 5319 |
* closed all timers in the map will be cancelled and freed. |
| 5320 |
* |
| 5321 |
* long bpf_timer_start(struct bpf_timer *timer, u64 nsecs, u64 flags) |
| 5322 |
* Description |
| 5323 |
* Set timer expiration N nanoseconds from the current time. The |
| 5324 |
* configured callback will be invoked in soft irq context on some cpu |
| 5325 |
* and will not repeat unless another bpf_timer_start() is made. |
| 5326 |
* In such case the next invocation can migrate to a different cpu. |
| 5327 |
* Since struct bpf_timer is a field inside map element the map |
| 5328 |
* owns the timer. The bpf_timer_set_callback() will increment refcnt |
| 5329 |
* of BPF program to make sure that callback_fn code stays valid. |
| 5330 |
* When user space reference to a map reaches zero all timers |
| 5331 |
* in a map are cancelled and corresponding program's refcnts are |
| 5332 |
* decremented. This is done to make sure that Ctrl-C of a user |
| 5333 |
* process doesn't leave any timers running. If map is pinned in |
| 5334 |
* bpffs the callback_fn can re-arm itself indefinitely. |
| 5335 |
* bpf_map_update/delete_elem() helpers and user space sys_bpf commands |
| 5336 |
* cancel and free the timer in the given map element. |
| 5337 |
* The map can contain timers that invoke callback_fn-s from different |
| 5338 |
* programs. The same callback_fn can serve different timers from |
| 5339 |
* different maps if key/value layout matches across maps. |
| 5340 |
* Every bpf_timer_set_callback() can have different callback_fn. |
| 5341 |
* |
| 5342 |
* *flags* can be one of: |
| 5343 |
* |
| 5344 |
* **BPF_F_TIMER_ABS** |
| 5345 |
* Start the timer in absolute expire value instead of the |
| 5346 |
* default relative one. |
| 5347 |
* **BPF_F_TIMER_CPU_PIN** |
| 5348 |
* Timer will be pinned to the CPU of the caller. |
| 5349 |
* |
| 5350 |
* Return |
| 5351 |
* 0 on success. |
| 5352 |
* **-EINVAL** if *timer* was not initialized with bpf_timer_init() earlier |
| 5353 |
* or invalid *flags* are passed. |
| 5354 |
* |
| 5355 |
* long bpf_timer_cancel(struct bpf_timer *timer) |
| 5356 |
* Description |
| 5357 |
* Cancel the timer and wait for callback_fn to finish if it was running. |
| 5358 |
* Return |
| 5359 |
* 0 if the timer was not active. |
| 5360 |
* 1 if the timer was active. |
| 5361 |
* **-EINVAL** if *timer* was not initialized with bpf_timer_init() earlier. |
| 5362 |
* **-EDEADLK** if callback_fn tried to call bpf_timer_cancel() on its |
| 5363 |
* own timer which would have led to a deadlock otherwise. |
| 5364 |
* |
| 5365 |
* u64 bpf_get_func_ip(void *ctx) |
| 5366 |
* Description |
| 5367 |
* Get address of the traced function (for tracing and kprobe programs). |
| 5368 |
* |
| 5369 |
* When called for kprobe program attached as uprobe it returns |
| 5370 |
* probe address for both entry and return uprobe. |
| 5371 |
* |
| 5372 |
* Return |
| 5373 |
* Address of the traced function for kprobe. |
| 5374 |
* 0 for kprobes placed within the function (not at the entry). |
| 5375 |
* Address of the probe for uprobe and return uprobe. |
| 5376 |
* |
| 5377 |
* u64 bpf_get_attach_cookie(void *ctx) |
| 5378 |
* Description |
| 5379 |
* Get bpf_cookie value provided (optionally) during the program |
| 5380 |
* attachment. It might be different for each individual |
| 5381 |
* attachment, even if BPF program itself is the same. |
| 5382 |
* Expects BPF program context *ctx* as a first argument. |
| 5383 |
* |
| 5384 |
* Supported for the following program types: |
| 5385 |
* - kprobe/uprobe; |
| 5386 |
* - tracepoint; |
| 5387 |
* - perf_event. |
| 5388 |
* Return |
| 5389 |
* Value specified by user at BPF link creation/attachment time |
| 5390 |
* or 0, if it was not specified. |
| 5391 |
* |
| 5392 |
* long bpf_task_pt_regs(struct task_struct *task) |
| 5393 |
* Description |
| 5394 |
* Get the struct pt_regs associated with **task**. |
| 5395 |
* Return |
| 5396 |
* A pointer to struct pt_regs. |
| 5397 |
* |
| 5398 |
* long bpf_get_branch_snapshot(void *entries, u32 size, u64 flags) |
| 5399 |
* Description |
| 5400 |
* Get branch trace from hardware engines like Intel LBR. The |
| 5401 |
* hardware engine is stopped shortly after the helper is |
| 5402 |
* called. Therefore, the user need to filter branch entries |
| 5403 |
* based on the actual use case. To capture branch trace |
| 5404 |
* before the trigger point of the BPF program, the helper |
| 5405 |
* should be called at the beginning of the BPF program. |
| 5406 |
* |
| 5407 |
* The data is stored as struct perf_branch_entry into output |
| 5408 |
* buffer *entries*. *size* is the size of *entries* in bytes. |
| 5409 |
* *flags* is reserved for now and must be zero. |
| 5410 |
* |
| 5411 |
* Return |
| 5412 |
* On success, number of bytes written to *buf*. On error, a |
| 5413 |
* negative value. |
| 5414 |
* |
| 5415 |
* **-EINVAL** if *flags* is not zero. |
| 5416 |
* |
| 5417 |
* **-ENOENT** if architecture does not support branch records. |
| 5418 |
* |
| 5419 |
* long bpf_trace_vprintk(const char *fmt, u32 fmt_size, const void *data, u32 data_len) |
| 5420 |
* Description |
| 5421 |
* Behaves like **bpf_trace_printk**\ () helper, but takes an array of u64 |
| 5422 |
* to format and can handle more format args as a result. |
| 5423 |
* |
| 5424 |
* Arguments are to be used as in **bpf_seq_printf**\ () helper. |
| 5425 |
* Return |
| 5426 |
* The number of bytes written to the buffer, or a negative error |
| 5427 |
* in case of failure. |
| 5428 |
* |
| 5429 |
* struct unix_sock *bpf_skc_to_unix_sock(void *sk) |
| 5430 |
* Description |
| 5431 |
* Dynamically cast a *sk* pointer to a *unix_sock* pointer. |
| 5432 |
* Return |
| 5433 |
* *sk* if casting is valid, or **NULL** otherwise. |
| 5434 |
* |
| 5435 |
* long bpf_kallsyms_lookup_name(const char *name, int name_sz, int flags, u64 *res) |
| 5436 |
* Description |
| 5437 |
* Get the address of a kernel symbol, returned in *res*. *res* is |
| 5438 |
* set to 0 if the symbol is not found. |
| 5439 |
* Return |
| 5440 |
* On success, zero. On error, a negative value. |
| 5441 |
* |
| 5442 |
* **-EINVAL** if *flags* is not zero. |
| 5443 |
* |
| 5444 |
* **-EINVAL** if string *name* is not the same size as *name_sz*. |
| 5445 |
* |
| 5446 |
* **-ENOENT** if symbol is not found. |
| 5447 |
* |
| 5448 |
* **-EPERM** if caller does not have permission to obtain kernel address. |
| 5449 |
* |
| 5450 |
* long bpf_find_vma(struct task_struct *task, u64 addr, void *callback_fn, void *callback_ctx, u64 flags) |
| 5451 |
* Description |
| 5452 |
* Find vma of *task* that contains *addr*, call *callback_fn* |
| 5453 |
* function with *task*, *vma*, and *callback_ctx*. |
| 5454 |
* The *callback_fn* should be a static function and |
| 5455 |
* the *callback_ctx* should be a pointer to the stack. |
| 5456 |
* The *flags* is used to control certain aspects of the helper. |
| 5457 |
* Currently, the *flags* must be 0. |
| 5458 |
* |
| 5459 |
* The expected callback signature is |
| 5460 |
* |
| 5461 |
* long (\*callback_fn)(struct task_struct \*task, struct vm_area_struct \*vma, void \*callback_ctx); |
| 5462 |
* |
| 5463 |
* Return |
| 5464 |
* 0 on success. |
| 5465 |
* **-ENOENT** if *task->mm* is NULL, or no vma contains *addr*. |
| 5466 |
* **-EBUSY** if failed to try lock mmap_lock. |
| 5467 |
* **-EINVAL** for invalid **flags**. |
| 5468 |
* |
| 5469 |
* long bpf_loop(u32 nr_loops, void *callback_fn, void *callback_ctx, u64 flags) |
| 5470 |
* Description |
| 5471 |
* For **nr_loops**, call **callback_fn** function |
| 5472 |
* with **callback_ctx** as the context parameter. |
| 5473 |
* The **callback_fn** should be a static function and |
| 5474 |
* the **callback_ctx** should be a pointer to the stack. |
| 5475 |
* The **flags** is used to control certain aspects of the helper. |
| 5476 |
* Currently, the **flags** must be 0. Currently, nr_loops is |
| 5477 |
* limited to 1 << 23 (~8 million) loops. |
| 5478 |
* |
| 5479 |
* long (\*callback_fn)(u64 index, void \*ctx); |
| 5480 |
* |
| 5481 |
* where **index** is the current index in the loop. The index |
| 5482 |
* is zero-indexed. |
| 5483 |
* |
| 5484 |
* If **callback_fn** returns 0, the helper will continue to the next |
| 5485 |
* loop. If return value is 1, the helper will skip the rest of |
| 5486 |
* the loops and return. Other return values are not used now, |
| 5487 |
* and will be rejected by the verifier. |
| 5488 |
* |
| 5489 |
* Return |
| 5490 |
* The number of loops performed, **-EINVAL** for invalid **flags**, |
| 5491 |
* **-E2BIG** if **nr_loops** exceeds the maximum number of loops. |
| 5492 |
* |
| 5493 |
* long bpf_strncmp(const char *s1, u32 s1_sz, const char *s2) |
| 5494 |
* Description |
| 5495 |
* Do strncmp() between **s1** and **s2**. **s1** doesn't need |
| 5496 |
* to be null-terminated and **s1_sz** is the maximum storage |
| 5497 |
* size of **s1**. **s2** must be a read-only string. |
| 5498 |
* Return |
| 5499 |
* An integer less than, equal to, or greater than zero |
| 5500 |
* if the first **s1_sz** bytes of **s1** is found to be |
| 5501 |
* less than, to match, or be greater than **s2**. |
| 5502 |
* |
| 5503 |
* long bpf_get_func_arg(void *ctx, u32 n, u64 *value) |
| 5504 |
* Description |
| 5505 |
* Get **n**-th argument register (zero based) of the traced function (for tracing programs) |
| 5506 |
* returned in **value**. |
| 5507 |
* |
| 5508 |
* Return |
| 5509 |
* 0 on success. |
| 5510 |
* **-EINVAL** if n >= argument register count of traced function. |
| 5511 |
* |
| 5512 |
* long bpf_get_func_ret(void *ctx, u64 *value) |
| 5513 |
* Description |
| 5514 |
* Get return value of the traced function (for tracing programs) |
| 5515 |
* in **value**. |
| 5516 |
* |
| 5517 |
* Return |
| 5518 |
* 0 on success. |
| 5519 |
* **-EOPNOTSUPP** for tracing programs other than BPF_TRACE_FEXIT or BPF_MODIFY_RETURN. |
| 5520 |
* |
| 5521 |
* long bpf_get_func_arg_cnt(void *ctx) |
| 5522 |
* Description |
| 5523 |
* Get number of registers of the traced function (for tracing programs) where |
| 5524 |
* function arguments are stored in these registers. |
| 5525 |
* |
| 5526 |
* Return |
| 5527 |
* The number of argument registers of the traced function. |
| 5528 |
* |
| 5529 |
* int bpf_get_retval(void) |
| 5530 |
* Description |
| 5531 |
* Get the BPF program's return value that will be returned to the upper layers. |
| 5532 |
* |
| 5533 |
* This helper is currently supported by cgroup programs and only by the hooks |
| 5534 |
* where BPF program's return value is returned to the userspace via errno. |
| 5535 |
* Return |
| 5536 |
* The BPF program's return value. |
| 5537 |
* |
| 5538 |
* int bpf_set_retval(int retval) |
| 5539 |
* Description |
| 5540 |
* Set the BPF program's return value that will be returned to the upper layers. |
| 5541 |
* |
| 5542 |
* This helper is currently supported by cgroup programs and only by the hooks |
| 5543 |
* where BPF program's return value is returned to the userspace via errno. |
| 5544 |
* |
| 5545 |
* Note that there is the following corner case where the program exports an error |
| 5546 |
* via bpf_set_retval but signals success via 'return 1': |
| 5547 |
* |
| 5548 |
* bpf_set_retval(-EPERM); |
| 5549 |
* return 1; |
| 5550 |
* |
| 5551 |
* In this case, the BPF program's return value will use helper's -EPERM. This |
| 5552 |
* still holds true for cgroup/bind{4,6} which supports extra 'return 3' success case. |
| 5553 |
* |
| 5554 |
* Return |
| 5555 |
* 0 on success, or a negative error in case of failure. |
| 5556 |
* |
| 5557 |
* u64 bpf_xdp_get_buff_len(struct xdp_buff *xdp_md) |
| 5558 |
* Description |
| 5559 |
* Get the total size of a given xdp buff (linear and paged area) |
| 5560 |
* Return |
| 5561 |
* The total size of a given xdp buffer. |
| 5562 |
* |
| 5563 |
* long bpf_xdp_load_bytes(struct xdp_buff *xdp_md, u32 offset, void *buf, u32 len) |
| 5564 |
* Description |
| 5565 |
* This helper is provided as an easy way to load data from a |
| 5566 |
* xdp buffer. It can be used to load *len* bytes from *offset* from |
| 5567 |
* the frame associated to *xdp_md*, into the buffer pointed by |
| 5568 |
* *buf*. |
| 5569 |
* Return |
| 5570 |
* 0 on success, or a negative error in case of failure. |
| 5571 |
* |
| 5572 |
* long bpf_xdp_store_bytes(struct xdp_buff *xdp_md, u32 offset, void *buf, u32 len) |
| 5573 |
* Description |
| 5574 |
* Store *len* bytes from buffer *buf* into the frame |
| 5575 |
* associated to *xdp_md*, at *offset*. |
| 5576 |
* Return |
| 5577 |
* 0 on success, or a negative error in case of failure. |
| 5578 |
* |
| 5579 |
* long bpf_copy_from_user_task(void *dst, u32 size, const void *user_ptr, struct task_struct *tsk, u64 flags) |
| 5580 |
* Description |
| 5581 |
* Read *size* bytes from user space address *user_ptr* in *tsk*'s |
| 5582 |
* address space, and stores the data in *dst*. *flags* is not |
| 5583 |
* used yet and is provided for future extensibility. This helper |
| 5584 |
* can only be used by sleepable programs. |
| 5585 |
* Return |
| 5586 |
* 0 on success, or a negative error in case of failure. On error |
| 5587 |
* *dst* buffer is zeroed out. |
| 5588 |
* |
| 5589 |
* long bpf_skb_set_tstamp(struct sk_buff *skb, u64 tstamp, u32 tstamp_type) |
| 5590 |
* Description |
| 5591 |
* Change the __sk_buff->tstamp_type to *tstamp_type* |
| 5592 |
* and set *tstamp* to the __sk_buff->tstamp together. |
| 5593 |
* |
| 5594 |
* If there is no need to change the __sk_buff->tstamp_type, |
| 5595 |
* the tstamp value can be directly written to __sk_buff->tstamp |
| 5596 |
* instead. |
| 5597 |
* |
| 5598 |
* BPF_SKB_TSTAMP_DELIVERY_MONO is the only tstamp that |
| 5599 |
* will be kept during bpf_redirect_*(). A non zero |
| 5600 |
* *tstamp* must be used with the BPF_SKB_TSTAMP_DELIVERY_MONO |
| 5601 |
* *tstamp_type*. |
| 5602 |
* |
| 5603 |
* A BPF_SKB_TSTAMP_UNSPEC *tstamp_type* can only be used |
| 5604 |
* with a zero *tstamp*. |
| 5605 |
* |
| 5606 |
* Only IPv4 and IPv6 skb->protocol are supported. |
| 5607 |
* |
| 5608 |
* This function is most useful when it needs to set a |
| 5609 |
* mono delivery time to __sk_buff->tstamp and then |
| 5610 |
* bpf_redirect_*() to the egress of an iface. For example, |
| 5611 |
* changing the (rcv) timestamp in __sk_buff->tstamp at |
| 5612 |
* ingress to a mono delivery time and then bpf_redirect_*() |
| 5613 |
* to sch_fq@phy-dev. |
| 5614 |
* Return |
| 5615 |
* 0 on success. |
| 5616 |
* **-EINVAL** for invalid input |
| 5617 |
* **-EOPNOTSUPP** for unsupported protocol |
| 5618 |
* |
| 5619 |
* long bpf_ima_file_hash(struct file *file, void *dst, u32 size) |
| 5620 |
* Description |
| 5621 |
* Returns a calculated IMA hash of the *file*. |
| 5622 |
* If the hash is larger than *size*, then only *size* |
| 5623 |
* bytes will be copied to *dst* |
| 5624 |
* Return |
| 5625 |
* The **hash_algo** is returned on success, |
| 5626 |
* **-EOPNOTSUPP** if the hash calculation failed or **-EINVAL** if |
| 5627 |
* invalid arguments are passed. |
| 5628 |
* |
| 5629 |
* void *bpf_kptr_xchg(void *dst, void *ptr) |
| 5630 |
* Description |
| 5631 |
* Exchange kptr at pointer *dst* with *ptr*, and return the old value. |
| 5632 |
* *dst* can be map value or local kptr. *ptr* can be NULL, otherwise |
| 5633 |
* it must be a referenced pointer which will be released when this helper |
| 5634 |
* is called. |
| 5635 |
* Return |
| 5636 |
* The old value of kptr (which can be NULL). The returned pointer |
| 5637 |
* if not NULL, is a reference which must be released using its |
| 5638 |
* corresponding release function, or moved into a BPF map before |
| 5639 |
* program exit. |
| 5640 |
* |
| 5641 |
* void *bpf_map_lookup_percpu_elem(struct bpf_map *map, const void *key, u32 cpu) |
| 5642 |
* Description |
| 5643 |
* Perform a lookup in *percpu map* for an entry associated to |
| 5644 |
* *key* on *cpu*. |
| 5645 |
* Return |
| 5646 |
* Map value associated to *key* on *cpu*, or **NULL** if no entry |
| 5647 |
* was found or *cpu* is invalid. |
| 5648 |
* |
| 5649 |
* struct mptcp_sock *bpf_skc_to_mptcp_sock(void *sk) |
| 5650 |
* Description |
| 5651 |
* Dynamically cast a *sk* pointer to a *mptcp_sock* pointer. |
| 5652 |
* Return |
| 5653 |
* *sk* if casting is valid, or **NULL** otherwise. |
| 5654 |
* |
| 5655 |
* long bpf_dynptr_from_mem(void *data, u64 size, u64 flags, struct bpf_dynptr *ptr) |
| 5656 |
* Description |
| 5657 |
* Get a dynptr to local memory *data*. |
| 5658 |
* |
| 5659 |
* *data* must be a ptr to a map value. |
| 5660 |
* The maximum *size* supported is DYNPTR_MAX_SIZE. |
| 5661 |
* *flags* is currently unused. |
| 5662 |
* Return |
| 5663 |
* 0 on success, -E2BIG if the size exceeds DYNPTR_MAX_SIZE, |
| 5664 |
* -EINVAL if flags is not 0. |
| 5665 |
* |
| 5666 |
* long bpf_ringbuf_reserve_dynptr(void *ringbuf, u32 size, u64 flags, struct bpf_dynptr *ptr) |
| 5667 |
* Description |
| 5668 |
* Reserve *size* bytes of payload in a ring buffer *ringbuf* |
| 5669 |
* through the dynptr interface. *flags* must be 0. |
| 5670 |
* |
| 5671 |
* Please note that a corresponding bpf_ringbuf_submit_dynptr or |
| 5672 |
* bpf_ringbuf_discard_dynptr must be called on *ptr*, even if the |
| 5673 |
* reservation fails. This is enforced by the verifier. |
| 5674 |
* Return |
| 5675 |
* 0 on success, or a negative error in case of failure. |
| 5676 |
* |
| 5677 |
* void bpf_ringbuf_submit_dynptr(struct bpf_dynptr *ptr, u64 flags) |
| 5678 |
* Description |
| 5679 |
* Submit reserved ring buffer sample, pointed to by *data*, |
| 5680 |
* through the dynptr interface. This is a no-op if the dynptr is |
| 5681 |
* invalid/null. |
| 5682 |
* |
| 5683 |
* For more information on *flags*, please see |
| 5684 |
* 'bpf_ringbuf_submit'. |
| 5685 |
* Return |
| 5686 |
* Nothing. Always succeeds. |
| 5687 |
* |
| 5688 |
* void bpf_ringbuf_discard_dynptr(struct bpf_dynptr *ptr, u64 flags) |
| 5689 |
* Description |
| 5690 |
* Discard reserved ring buffer sample through the dynptr |
| 5691 |
* interface. This is a no-op if the dynptr is invalid/null. |
| 5692 |
* |
| 5693 |
* For more information on *flags*, please see |
| 5694 |
* 'bpf_ringbuf_discard'. |
| 5695 |
* Return |
| 5696 |
* Nothing. Always succeeds. |
| 5697 |
* |
| 5698 |
* long bpf_dynptr_read(void *dst, u64 len, const struct bpf_dynptr *src, u64 offset, u64 flags) |
| 5699 |
* Description |
| 5700 |
* Read *len* bytes from *src* into *dst*, starting from *offset* |
| 5701 |
* into *src*. |
| 5702 |
* *flags* is currently unused. |
| 5703 |
* Return |
| 5704 |
* 0 on success, -E2BIG if *offset* + *len* exceeds the length |
| 5705 |
* of *src*'s data, -EINVAL if *src* is an invalid dynptr or if |
| 5706 |
* *flags* is not 0. |
| 5707 |
* |
| 5708 |
* long bpf_dynptr_write(const struct bpf_dynptr *dst, u64 offset, void *src, u64 len, u64 flags) |
| 5709 |
* Description |
| 5710 |
* Write *len* bytes from *src* into *dst*, starting from *offset* |
| 5711 |
* into *dst*. |
| 5712 |
* |
| 5713 |
* *flags* must be 0 except for skb-type dynptrs. |
| 5714 |
* |
| 5715 |
* For skb-type dynptrs: |
| 5716 |
* * All data slices of the dynptr are automatically |
| 5717 |
* invalidated after **bpf_dynptr_write**\ (). This is |
| 5718 |
* because writing may pull the skb and change the |
| 5719 |
* underlying packet buffer. |
| 5720 |
* |
| 5721 |
* * For *flags*, please see the flags accepted by |
| 5722 |
* **bpf_skb_store_bytes**\ (). |
| 5723 |
* Return |
| 5724 |
* 0 on success, -E2BIG if *offset* + *len* exceeds the length |
| 5725 |
* of *dst*'s data, -EINVAL if *dst* is an invalid dynptr or if *dst* |
| 5726 |
* is a read-only dynptr or if *flags* is not correct. For skb-type dynptrs, |
| 5727 |
* other errors correspond to errors returned by **bpf_skb_store_bytes**\ (). |
| 5728 |
* |
| 5729 |
* void *bpf_dynptr_data(const struct bpf_dynptr *ptr, u64 offset, u64 len) |
| 5730 |
* Description |
| 5731 |
* Get a pointer to the underlying dynptr data. |
| 5732 |
* |
| 5733 |
* *len* must be a statically known value. The returned data slice |
| 5734 |
* is invalidated whenever the dynptr is invalidated. |
| 5735 |
* |
| 5736 |
* skb and xdp type dynptrs may not use bpf_dynptr_data. They should |
| 5737 |
* instead use bpf_dynptr_slice and bpf_dynptr_slice_rdwr. |
| 5738 |
* Return |
| 5739 |
* Pointer to the underlying dynptr data, NULL if the dynptr is |
| 5740 |
* read-only, if the dynptr is invalid, or if the offset and length |
| 5741 |
* is out of bounds. |
| 5742 |
* |
| 5743 |
* s64 bpf_tcp_raw_gen_syncookie_ipv4(struct iphdr *iph, struct tcphdr *th, u32 th_len) |
| 5744 |
* Description |
| 5745 |
* Try to issue a SYN cookie for the packet with corresponding |
| 5746 |
* IPv4/TCP headers, *iph* and *th*, without depending on a |
| 5747 |
* listening socket. |
| 5748 |
* |
| 5749 |
* *iph* points to the IPv4 header. |
| 5750 |
* |
| 5751 |
* *th* points to the start of the TCP header, while *th_len* |
| 5752 |
* contains the length of the TCP header (at least |
| 5753 |
* **sizeof**\ (**struct tcphdr**)). |
| 5754 |
* Return |
| 5755 |
* On success, lower 32 bits hold the generated SYN cookie in |
| 5756 |
* followed by 16 bits which hold the MSS value for that cookie, |
| 5757 |
* and the top 16 bits are unused. |
| 5758 |
* |
| 5759 |
* On failure, the returned value is one of the following: |
| 5760 |
* |
| 5761 |
* **-EINVAL** if *th_len* is invalid. |
| 5762 |
* |
| 5763 |
* s64 bpf_tcp_raw_gen_syncookie_ipv6(struct ipv6hdr *iph, struct tcphdr *th, u32 th_len) |
| 5764 |
* Description |
| 5765 |
* Try to issue a SYN cookie for the packet with corresponding |
| 5766 |
* IPv6/TCP headers, *iph* and *th*, without depending on a |
| 5767 |
* listening socket. |
| 5768 |
* |
| 5769 |
* *iph* points to the IPv6 header. |
| 5770 |
* |
| 5771 |
* *th* points to the start of the TCP header, while *th_len* |
| 5772 |
* contains the length of the TCP header (at least |
| 5773 |
* **sizeof**\ (**struct tcphdr**)). |
| 5774 |
* Return |
| 5775 |
* On success, lower 32 bits hold the generated SYN cookie in |
| 5776 |
* followed by 16 bits which hold the MSS value for that cookie, |
| 5777 |
* and the top 16 bits are unused. |
| 5778 |
* |
| 5779 |
* On failure, the returned value is one of the following: |
| 5780 |
* |
| 5781 |
* **-EINVAL** if *th_len* is invalid. |
| 5782 |
* |
| 5783 |
* **-EPROTONOSUPPORT** if CONFIG_IPV6 is not builtin. |
| 5784 |
* |
| 5785 |
* long bpf_tcp_raw_check_syncookie_ipv4(struct iphdr *iph, struct tcphdr *th) |
| 5786 |
* Description |
| 5787 |
* Check whether *iph* and *th* contain a valid SYN cookie ACK |
| 5788 |
* without depending on a listening socket. |
| 5789 |
* |
| 5790 |
* *iph* points to the IPv4 header. |
| 5791 |
* |
| 5792 |
* *th* points to the TCP header. |
| 5793 |
* Return |
| 5794 |
* 0 if *iph* and *th* are a valid SYN cookie ACK. |
| 5795 |
* |
| 5796 |
* On failure, the returned value is one of the following: |
| 5797 |
* |
| 5798 |
* **-EACCES** if the SYN cookie is not valid. |
| 5799 |
* |
| 5800 |
* long bpf_tcp_raw_check_syncookie_ipv6(struct ipv6hdr *iph, struct tcphdr *th) |
| 5801 |
* Description |
| 5802 |
* Check whether *iph* and *th* contain a valid SYN cookie ACK |
| 5803 |
* without depending on a listening socket. |
| 5804 |
* |
| 5805 |
* *iph* points to the IPv6 header. |
| 5806 |
* |
| 5807 |
* *th* points to the TCP header. |
| 5808 |
* Return |
| 5809 |
* 0 if *iph* and *th* are a valid SYN cookie ACK. |
| 5810 |
* |
| 5811 |
* On failure, the returned value is one of the following: |
| 5812 |
* |
| 5813 |
* **-EACCES** if the SYN cookie is not valid. |
| 5814 |
* |
| 5815 |
* **-EPROTONOSUPPORT** if CONFIG_IPV6 is not builtin. |
| 5816 |
* |
| 5817 |
* u64 bpf_ktime_get_tai_ns(void) |
| 5818 |
* Description |
| 5819 |
* A nonsettable system-wide clock derived from wall-clock time but |
| 5820 |
* ignoring leap seconds. This clock does not experience |
| 5821 |
* discontinuities and backwards jumps caused by NTP inserting leap |
| 5822 |
* seconds as CLOCK_REALTIME does. |
| 5823 |
* |
| 5824 |
* See: **clock_gettime**\ (**CLOCK_TAI**) |
| 5825 |
* Return |
| 5826 |
* Current *ktime*. |
| 5827 |
* |
| 5828 |
* long bpf_user_ringbuf_drain(struct bpf_map *map, void *callback_fn, void *ctx, u64 flags) |
| 5829 |
* Description |
| 5830 |
* Drain samples from the specified user ring buffer, and invoke |
| 5831 |
* the provided callback for each such sample: |
| 5832 |
* |
| 5833 |
* long (\*callback_fn)(const struct bpf_dynptr \*dynptr, void \*ctx); |
| 5834 |
* |
| 5835 |
* If **callback_fn** returns 0, the helper will continue to try |
| 5836 |
* and drain the next sample, up to a maximum of |
| 5837 |
* BPF_MAX_USER_RINGBUF_SAMPLES samples. If the return value is 1, |
| 5838 |
* the helper will skip the rest of the samples and return. Other |
| 5839 |
* return values are not used now, and will be rejected by the |
| 5840 |
* verifier. |
| 5841 |
* Return |
| 5842 |
* The number of drained samples if no error was encountered while |
| 5843 |
* draining samples, or 0 if no samples were present in the ring |
| 5844 |
* buffer. If a user-space producer was epoll-waiting on this map, |
| 5845 |
* and at least one sample was drained, they will receive an event |
| 5846 |
* notification notifying them of available space in the ring |
| 5847 |
* buffer. If the BPF_RB_NO_WAKEUP flag is passed to this |
| 5848 |
* function, no wakeup notification will be sent. If the |
| 5849 |
* BPF_RB_FORCE_WAKEUP flag is passed, a wakeup notification will |
| 5850 |
* be sent even if no sample was drained. |
| 5851 |
* |
| 5852 |
* On failure, the returned value is one of the following: |
| 5853 |
* |
| 5854 |
* **-EBUSY** if the ring buffer is contended, and another calling |
| 5855 |
* context was concurrently draining the ring buffer. |
| 5856 |
* |
| 5857 |
* **-EINVAL** if user-space is not properly tracking the ring |
| 5858 |
* buffer due to the producer position not being aligned to 8 |
| 5859 |
* bytes, a sample not being aligned to 8 bytes, or the producer |
| 5860 |
* position not matching the advertised length of a sample. |
| 5861 |
* |
| 5862 |
* **-E2BIG** if user-space has tried to publish a sample which is |
| 5863 |
* larger than the size of the ring buffer, or which cannot fit |
| 5864 |
* within a struct bpf_dynptr. |
| 5865 |
* |
| 5866 |
* void *bpf_cgrp_storage_get(struct bpf_map *map, struct cgroup *cgroup, void *value, u64 flags) |
| 5867 |
* Description |
| 5868 |
* Get a bpf_local_storage from the *cgroup*. |
| 5869 |
* |
| 5870 |
* Logically, it could be thought of as getting the value from |
| 5871 |
* a *map* with *cgroup* as the **key**. From this |
| 5872 |
* perspective, the usage is not much different from |
| 5873 |
* **bpf_map_lookup_elem**\ (*map*, **&**\ *cgroup*) except this |
| 5874 |
* helper enforces the key must be a cgroup struct and the map must also |
| 5875 |
* be a **BPF_MAP_TYPE_CGRP_STORAGE**. |
| 5876 |
* |
| 5877 |
* In reality, the local-storage value is embedded directly inside of the |
| 5878 |
* *cgroup* object itself, rather than being located in the |
| 5879 |
* **BPF_MAP_TYPE_CGRP_STORAGE** map. When the local-storage value is |
| 5880 |
* queried for some *map* on a *cgroup* object, the kernel will perform an |
| 5881 |
* O(n) iteration over all of the live local-storage values for that |
| 5882 |
* *cgroup* object until the local-storage value for the *map* is found. |
| 5883 |
* |
| 5884 |
* An optional *flags* (**BPF_LOCAL_STORAGE_GET_F_CREATE**) can be |
| 5885 |
* used such that a new bpf_local_storage will be |
| 5886 |
* created if one does not exist. *value* can be used |
| 5887 |
* together with **BPF_LOCAL_STORAGE_GET_F_CREATE** to specify |
| 5888 |
* the initial value of a bpf_local_storage. If *value* is |
| 5889 |
* **NULL**, the new bpf_local_storage will be zero initialized. |
| 5890 |
* Return |
| 5891 |
* A bpf_local_storage pointer is returned on success. |
| 5892 |
* |
| 5893 |
* **NULL** if not found or there was an error in adding |
| 5894 |
* a new bpf_local_storage. |
| 5895 |
* |
| 5896 |
* long bpf_cgrp_storage_delete(struct bpf_map *map, struct cgroup *cgroup) |
| 5897 |
* Description |
| 5898 |
* Delete a bpf_local_storage from a *cgroup*. |
| 5899 |
* Return |
| 5900 |
* 0 on success. |
| 5901 |
* |
| 5902 |
* **-ENOENT** if the bpf_local_storage cannot be found. |
| 5903 |
*/ |
| 5904 |
#define ___BPF_FUNC_MAPPER(FN, ctx...) \ |
| 5905 |
FN(unspec, 0, ##ctx) \ |
| 5906 |
FN(map_lookup_elem, 1, ##ctx) \ |
| 5907 |
FN(map_update_elem, 2, ##ctx) \ |
| 5908 |
FN(map_delete_elem, 3, ##ctx) \ |
| 5909 |
FN(probe_read, 4, ##ctx) \ |
| 5910 |
FN(ktime_get_ns, 5, ##ctx) \ |
| 5911 |
FN(trace_printk, 6, ##ctx) \ |
| 5912 |
FN(get_prandom_u32, 7, ##ctx) \ |
| 5913 |
FN(get_smp_processor_id, 8, ##ctx) \ |
| 5914 |
FN(skb_store_bytes, 9, ##ctx) \ |
| 5915 |
FN(l3_csum_replace, 10, ##ctx) \ |
| 5916 |
FN(l4_csum_replace, 11, ##ctx) \ |
| 5917 |
FN(tail_call, 12, ##ctx) \ |
| 5918 |
FN(clone_redirect, 13, ##ctx) \ |
| 5919 |
FN(get_current_pid_tgid, 14, ##ctx) \ |
| 5920 |
FN(get_current_uid_gid, 15, ##ctx) \ |
| 5921 |
FN(get_current_comm, 16, ##ctx) \ |
| 5922 |
FN(get_cgroup_classid, 17, ##ctx) \ |
| 5923 |
FN(skb_vlan_push, 18, ##ctx) \ |
| 5924 |
FN(skb_vlan_pop, 19, ##ctx) \ |
| 5925 |
FN(skb_get_tunnel_key, 20, ##ctx) \ |
| 5926 |
FN(skb_set_tunnel_key, 21, ##ctx) \ |
| 5927 |
FN(perf_event_read, 22, ##ctx) \ |
| 5928 |
FN(redirect, 23, ##ctx) \ |
| 5929 |
FN(get_route_realm, 24, ##ctx) \ |
| 5930 |
FN(perf_event_output, 25, ##ctx) \ |
| 5931 |
FN(skb_load_bytes, 26, ##ctx) \ |
| 5932 |
FN(get_stackid, 27, ##ctx) \ |
| 5933 |
FN(csum_diff, 28, ##ctx) \ |
| 5934 |
FN(skb_get_tunnel_opt, 29, ##ctx) \ |
| 5935 |
FN(skb_set_tunnel_opt, 30, ##ctx) \ |
| 5936 |
FN(skb_change_proto, 31, ##ctx) \ |
| 5937 |
FN(skb_change_type, 32, ##ctx) \ |
| 5938 |
FN(skb_under_cgroup, 33, ##ctx) \ |
| 5939 |
FN(get_hash_recalc, 34, ##ctx) \ |
| 5940 |
FN(get_current_task, 35, ##ctx) \ |
| 5941 |
FN(probe_write_user, 36, ##ctx) \ |
| 5942 |
FN(current_task_under_cgroup, 37, ##ctx) \ |
| 5943 |
FN(skb_change_tail, 38, ##ctx) \ |
| 5944 |
FN(skb_pull_data, 39, ##ctx) \ |
| 5945 |
FN(csum_update, 40, ##ctx) \ |
| 5946 |
FN(set_hash_invalid, 41, ##ctx) \ |
| 5947 |
FN(get_numa_node_id, 42, ##ctx) \ |
| 5948 |
FN(skb_change_head, 43, ##ctx) \ |
| 5949 |
FN(xdp_adjust_head, 44, ##ctx) \ |
| 5950 |
FN(probe_read_str, 45, ##ctx) \ |
| 5951 |
FN(get_socket_cookie, 46, ##ctx) \ |
| 5952 |
FN(get_socket_uid, 47, ##ctx) \ |
| 5953 |
FN(set_hash, 48, ##ctx) \ |
| 5954 |
FN(setsockopt, 49, ##ctx) \ |
| 5955 |
FN(skb_adjust_room, 50, ##ctx) \ |
| 5956 |
FN(redirect_map, 51, ##ctx) \ |
| 5957 |
FN(sk_redirect_map, 52, ##ctx) \ |
| 5958 |
FN(sock_map_update, 53, ##ctx) \ |
| 5959 |
FN(xdp_adjust_meta, 54, ##ctx) \ |
| 5960 |
FN(perf_event_read_value, 55, ##ctx) \ |
| 5961 |
FN(perf_prog_read_value, 56, ##ctx) \ |
| 5962 |
FN(getsockopt, 57, ##ctx) \ |
| 5963 |
FN(override_return, 58, ##ctx) \ |
| 5964 |
FN(sock_ops_cb_flags_set, 59, ##ctx) \ |
| 5965 |
FN(msg_redirect_map, 60, ##ctx) \ |
| 5966 |
FN(msg_apply_bytes, 61, ##ctx) \ |
| 5967 |
FN(msg_cork_bytes, 62, ##ctx) \ |
| 5968 |
FN(msg_pull_data, 63, ##ctx) \ |
| 5969 |
FN(bind, 64, ##ctx) \ |
| 5970 |
FN(xdp_adjust_tail, 65, ##ctx) \ |
| 5971 |
FN(skb_get_xfrm_state, 66, ##ctx) \ |
| 5972 |
FN(get_stack, 67, ##ctx) \ |
| 5973 |
FN(skb_load_bytes_relative, 68, ##ctx) \ |
| 5974 |
FN(fib_lookup, 69, ##ctx) \ |
| 5975 |
FN(sock_hash_update, 70, ##ctx) \ |
| 5976 |
FN(msg_redirect_hash, 71, ##ctx) \ |
| 5977 |
FN(sk_redirect_hash, 72, ##ctx) \ |
| 5978 |
FN(lwt_push_encap, 73, ##ctx) \ |
| 5979 |
FN(lwt_seg6_store_bytes, 74, ##ctx) \ |
| 5980 |
FN(lwt_seg6_adjust_srh, 75, ##ctx) \ |
| 5981 |
FN(lwt_seg6_action, 76, ##ctx) \ |
| 5982 |
FN(rc_repeat, 77, ##ctx) \ |
| 5983 |
FN(rc_keydown, 78, ##ctx) \ |
| 5984 |
FN(skb_cgroup_id, 79, ##ctx) \ |
| 5985 |
FN(get_current_cgroup_id, 80, ##ctx) \ |
| 5986 |
FN(get_local_storage, 81, ##ctx) \ |
| 5987 |
FN(sk_select_reuseport, 82, ##ctx) \ |
| 5988 |
FN(skb_ancestor_cgroup_id, 83, ##ctx) \ |
| 5989 |
FN(sk_lookup_tcp, 84, ##ctx) \ |
| 5990 |
FN(sk_lookup_udp, 85, ##ctx) \ |
| 5991 |
FN(sk_release, 86, ##ctx) \ |
| 5992 |
FN(map_push_elem, 87, ##ctx) \ |
| 5993 |
FN(map_pop_elem, 88, ##ctx) \ |
| 5994 |
FN(map_peek_elem, 89, ##ctx) \ |
| 5995 |
FN(msg_push_data, 90, ##ctx) \ |
| 5996 |
FN(msg_pop_data, 91, ##ctx) \ |
| 5997 |
FN(rc_pointer_rel, 92, ##ctx) \ |
| 5998 |
FN(spin_lock, 93, ##ctx) \ |
| 5999 |
FN(spin_unlock, 94, ##ctx) \ |
| 6000 |
FN(sk_fullsock, 95, ##ctx) \ |
| 6001 |
FN(tcp_sock, 96, ##ctx) \ |
| 6002 |
FN(skb_ecn_set_ce, 97, ##ctx) \ |
| 6003 |
FN(get_listener_sock, 98, ##ctx) \ |
| 6004 |
FN(skc_lookup_tcp, 99, ##ctx) \ |
| 6005 |
FN(tcp_check_syncookie, 100, ##ctx) \ |
| 6006 |
FN(sysctl_get_name, 101, ##ctx) \ |
| 6007 |
FN(sysctl_get_current_value, 102, ##ctx) \ |
| 6008 |
FN(sysctl_get_new_value, 103, ##ctx) \ |
| 6009 |
FN(sysctl_set_new_value, 104, ##ctx) \ |
| 6010 |
FN(strtol, 105, ##ctx) \ |
| 6011 |
FN(strtoul, 106, ##ctx) \ |
| 6012 |
FN(sk_storage_get, 107, ##ctx) \ |
| 6013 |
FN(sk_storage_delete, 108, ##ctx) \ |
| 6014 |
FN(send_signal, 109, ##ctx) \ |
| 6015 |
FN(tcp_gen_syncookie, 110, ##ctx) \ |
| 6016 |
FN(skb_output, 111, ##ctx) \ |
| 6017 |
FN(probe_read_user, 112, ##ctx) \ |
| 6018 |
FN(probe_read_kernel, 113, ##ctx) \ |
| 6019 |
FN(probe_read_user_str, 114, ##ctx) \ |
| 6020 |
FN(probe_read_kernel_str, 115, ##ctx) \ |
| 6021 |
FN(tcp_send_ack, 116, ##ctx) \ |
| 6022 |
FN(send_signal_thread, 117, ##ctx) \ |
| 6023 |
FN(jiffies64, 118, ##ctx) \ |
| 6024 |
FN(read_branch_records, 119, ##ctx) \ |
| 6025 |
FN(get_ns_current_pid_tgid, 120, ##ctx) \ |
| 6026 |
FN(xdp_output, 121, ##ctx) \ |
| 6027 |
FN(get_netns_cookie, 122, ##ctx) \ |
| 6028 |
FN(get_current_ancestor_cgroup_id, 123, ##ctx) \ |
| 6029 |
FN(sk_assign, 124, ##ctx) \ |
| 6030 |
FN(ktime_get_boot_ns, 125, ##ctx) \ |
| 6031 |
FN(seq_printf, 126, ##ctx) \ |
| 6032 |
FN(seq_write, 127, ##ctx) \ |
| 6033 |
FN(sk_cgroup_id, 128, ##ctx) \ |
| 6034 |
FN(sk_ancestor_cgroup_id, 129, ##ctx) \ |
| 6035 |
FN(ringbuf_output, 130, ##ctx) \ |
| 6036 |
FN(ringbuf_reserve, 131, ##ctx) \ |
| 6037 |
FN(ringbuf_submit, 132, ##ctx) \ |
| 6038 |
FN(ringbuf_discard, 133, ##ctx) \ |
| 6039 |
FN(ringbuf_query, 134, ##ctx) \ |
| 6040 |
FN(csum_level, 135, ##ctx) \ |
| 6041 |
FN(skc_to_tcp6_sock, 136, ##ctx) \ |
| 6042 |
FN(skc_to_tcp_sock, 137, ##ctx) \ |
| 6043 |
FN(skc_to_tcp_timewait_sock, 138, ##ctx) \ |
| 6044 |
FN(skc_to_tcp_request_sock, 139, ##ctx) \ |
| 6045 |
FN(skc_to_udp6_sock, 140, ##ctx) \ |
| 6046 |
FN(get_task_stack, 141, ##ctx) \ |
| 6047 |
FN(load_hdr_opt, 142, ##ctx) \ |
| 6048 |
FN(store_hdr_opt, 143, ##ctx) \ |
| 6049 |
FN(reserve_hdr_opt, 144, ##ctx) \ |
| 6050 |
FN(inode_storage_get, 145, ##ctx) \ |
| 6051 |
FN(inode_storage_delete, 146, ##ctx) \ |
| 6052 |
FN(d_path, 147, ##ctx) \ |
| 6053 |
FN(copy_from_user, 148, ##ctx) \ |
| 6054 |
FN(snprintf_btf, 149, ##ctx) \ |
| 6055 |
FN(seq_printf_btf, 150, ##ctx) \ |
| 6056 |
FN(skb_cgroup_classid, 151, ##ctx) \ |
| 6057 |
FN(redirect_neigh, 152, ##ctx) \ |
| 6058 |
FN(per_cpu_ptr, 153, ##ctx) \ |
| 6059 |
FN(this_cpu_ptr, 154, ##ctx) \ |
| 6060 |
FN(redirect_peer, 155, ##ctx) \ |
| 6061 |
FN(task_storage_get, 156, ##ctx) \ |
| 6062 |
FN(task_storage_delete, 157, ##ctx) \ |
| 6063 |
FN(get_current_task_btf, 158, ##ctx) \ |
| 6064 |
FN(bprm_opts_set, 159, ##ctx) \ |
| 6065 |
FN(ktime_get_coarse_ns, 160, ##ctx) \ |
| 6066 |
FN(ima_inode_hash, 161, ##ctx) \ |
| 6067 |
FN(sock_from_file, 162, ##ctx) \ |
| 6068 |
FN(check_mtu, 163, ##ctx) \ |
| 6069 |
FN(for_each_map_elem, 164, ##ctx) \ |
| 6070 |
FN(snprintf, 165, ##ctx) \ |
| 6071 |
FN(sys_bpf, 166, ##ctx) \ |
| 6072 |
FN(btf_find_by_name_kind, 167, ##ctx) \ |
| 6073 |
FN(sys_close, 168, ##ctx) \ |
| 6074 |
FN(timer_init, 169, ##ctx) \ |
| 6075 |
FN(timer_set_callback, 170, ##ctx) \ |
| 6076 |
FN(timer_start, 171, ##ctx) \ |
| 6077 |
FN(timer_cancel, 172, ##ctx) \ |
| 6078 |
FN(get_func_ip, 173, ##ctx) \ |
| 6079 |
FN(get_attach_cookie, 174, ##ctx) \ |
| 6080 |
FN(task_pt_regs, 175, ##ctx) \ |
| 6081 |
FN(get_branch_snapshot, 176, ##ctx) \ |
| 6082 |
FN(trace_vprintk, 177, ##ctx) \ |
| 6083 |
FN(skc_to_unix_sock, 178, ##ctx) \ |
| 6084 |
FN(kallsyms_lookup_name, 179, ##ctx) \ |
| 6085 |
FN(find_vma, 180, ##ctx) \ |
| 6086 |
FN(loop, 181, ##ctx) \ |
| 6087 |
FN(strncmp, 182, ##ctx) \ |
| 6088 |
FN(get_func_arg, 183, ##ctx) \ |
| 6089 |
FN(get_func_ret, 184, ##ctx) \ |
| 6090 |
FN(get_func_arg_cnt, 185, ##ctx) \ |
| 6091 |
FN(get_retval, 186, ##ctx) \ |
| 6092 |
FN(set_retval, 187, ##ctx) \ |
| 6093 |
FN(xdp_get_buff_len, 188, ##ctx) \ |
| 6094 |
FN(xdp_load_bytes, 189, ##ctx) \ |
| 6095 |
FN(xdp_store_bytes, 190, ##ctx) \ |
| 6096 |
FN(copy_from_user_task, 191, ##ctx) \ |
| 6097 |
FN(skb_set_tstamp, 192, ##ctx) \ |
| 6098 |
FN(ima_file_hash, 193, ##ctx) \ |
| 6099 |
FN(kptr_xchg, 194, ##ctx) \ |
| 6100 |
FN(map_lookup_percpu_elem, 195, ##ctx) \ |
| 6101 |
FN(skc_to_mptcp_sock, 196, ##ctx) \ |
| 6102 |
FN(dynptr_from_mem, 197, ##ctx) \ |
| 6103 |
FN(ringbuf_reserve_dynptr, 198, ##ctx) \ |
| 6104 |
FN(ringbuf_submit_dynptr, 199, ##ctx) \ |
| 6105 |
FN(ringbuf_discard_dynptr, 200, ##ctx) \ |
| 6106 |
FN(dynptr_read, 201, ##ctx) \ |
| 6107 |
FN(dynptr_write, 202, ##ctx) \ |
| 6108 |
FN(dynptr_data, 203, ##ctx) \ |
| 6109 |
FN(tcp_raw_gen_syncookie_ipv4, 204, ##ctx) \ |
| 6110 |
FN(tcp_raw_gen_syncookie_ipv6, 205, ##ctx) \ |
| 6111 |
FN(tcp_raw_check_syncookie_ipv4, 206, ##ctx) \ |
| 6112 |
FN(tcp_raw_check_syncookie_ipv6, 207, ##ctx) \ |
| 6113 |
FN(ktime_get_tai_ns, 208, ##ctx) \ |
| 6114 |
FN(user_ringbuf_drain, 209, ##ctx) \ |
| 6115 |
FN(cgrp_storage_get, 210, ##ctx) \ |
| 6116 |
FN(cgrp_storage_delete, 211, ##ctx) \ |
| 6117 |
/* This helper list is effectively frozen. If you are trying to \ |
| 6118 |
* add a new helper, you should add a kfunc instead which has \ |
| 6119 |
* less stability guarantees. See Documentation/bpf/kfuncs.rst \ |
| 6120 |
*/ |
| 6121 |
|
| 6122 |
/* backwards-compatibility macros for users of __BPF_FUNC_MAPPER that don't |
| 6123 |
* know or care about integer value that is now passed as second argument |
| 6124 |
*/ |
| 6125 |
#define __BPF_FUNC_MAPPER_APPLY(name, value, FN) FN(name), |
| 6126 |
#define __BPF_FUNC_MAPPER(FN) ___BPF_FUNC_MAPPER(__BPF_FUNC_MAPPER_APPLY, FN) |
| 6127 |
|
| 6128 |
/* integer value in 'imm' field of BPF_CALL instruction selects which helper |
| 6129 |
* function eBPF program intends to call |
| 6130 |
*/ |
| 6131 |
#define __BPF_ENUM_FN(x, y) BPF_FUNC_ ## x = y, |
| 6132 |
enum bpf_func_id { |
| 6133 |
___BPF_FUNC_MAPPER(__BPF_ENUM_FN) |
| 6134 |
__BPF_FUNC_MAX_ID, |
| 6135 |
}; |
| 6136 |
#undef __BPF_ENUM_FN |
| 6137 |
|
| 6138 |
/* All flags used by eBPF helper functions, placed here. */ |
| 6139 |
|
| 6140 |
/* BPF_FUNC_skb_store_bytes flags. */ |
| 6141 |
enum { |
| 6142 |
BPF_F_RECOMPUTE_CSUM = (1ULL << 0), |
| 6143 |
BPF_F_INVALIDATE_HASH = (1ULL << 1), |
| 6144 |
}; |
| 6145 |
|
| 6146 |
/* BPF_FUNC_l3_csum_replace and BPF_FUNC_l4_csum_replace flags. |
| 6147 |
* First 4 bits are for passing the header field size. |
| 6148 |
*/ |
| 6149 |
enum { |
| 6150 |
BPF_F_HDR_FIELD_MASK = 0xfULL, |
| 6151 |
}; |
| 6152 |
|
| 6153 |
/* BPF_FUNC_l4_csum_replace flags. */ |
| 6154 |
enum { |
| 6155 |
BPF_F_PSEUDO_HDR = (1ULL << 4), |
| 6156 |
BPF_F_MARK_MANGLED_0 = (1ULL << 5), |
| 6157 |
BPF_F_MARK_ENFORCE = (1ULL << 6), |
| 6158 |
BPF_F_IPV6 = (1ULL << 7), |
| 6159 |
}; |
| 6160 |
|
| 6161 |
/* BPF_FUNC_skb_set_tunnel_key and BPF_FUNC_skb_get_tunnel_key flags. */ |
| 6162 |
enum { |
| 6163 |
BPF_F_TUNINFO_IPV6 = (1ULL << 0), |
| 6164 |
}; |
| 6165 |
|
| 6166 |
/* flags for both BPF_FUNC_get_stackid and BPF_FUNC_get_stack. */ |
| 6167 |
enum { |
| 6168 |
BPF_F_SKIP_FIELD_MASK = 0xffULL, |
| 6169 |
BPF_F_USER_STACK = (1ULL << 8), |
| 6170 |
/* flags used by BPF_FUNC_get_stackid only. */ |
| 6171 |
BPF_F_FAST_STACK_CMP = (1ULL << 9), |
| 6172 |
BPF_F_REUSE_STACKID = (1ULL << 10), |
| 6173 |
/* flags used by BPF_FUNC_get_stack only. */ |
| 6174 |
BPF_F_USER_BUILD_ID = (1ULL << 11), |
| 6175 |
}; |
| 6176 |
|
| 6177 |
/* BPF_FUNC_skb_set_tunnel_key flags. */ |
| 6178 |
enum { |
| 6179 |
BPF_F_ZERO_CSUM_TX = (1ULL << 1), |
| 6180 |
BPF_F_DONT_FRAGMENT = (1ULL << 2), |
| 6181 |
BPF_F_SEQ_NUMBER = (1ULL << 3), |
| 6182 |
BPF_F_NO_TUNNEL_KEY = (1ULL << 4), |
| 6183 |
}; |
| 6184 |
|
| 6185 |
/* BPF_FUNC_skb_get_tunnel_key flags. */ |
| 6186 |
enum { |
| 6187 |
BPF_F_TUNINFO_FLAGS = (1ULL << 4), |
| 6188 |
}; |
| 6189 |
|
| 6190 |
/* BPF_FUNC_perf_event_output, BPF_FUNC_perf_event_read and |
| 6191 |
* BPF_FUNC_perf_event_read_value flags. |
| 6192 |
*/ |
| 6193 |
enum { |
| 6194 |
BPF_F_INDEX_MASK = 0xffffffffULL, |
| 6195 |
BPF_F_CURRENT_CPU = BPF_F_INDEX_MASK, |
| 6196 |
/* BPF_FUNC_perf_event_output for sk_buff input context. */ |
| 6197 |
BPF_F_CTXLEN_MASK = (0xfffffULL << 32), |
| 6198 |
}; |
| 6199 |
|
| 6200 |
/* Current network namespace */ |
| 6201 |
enum { |
| 6202 |
BPF_F_CURRENT_NETNS = (-1L), |
| 6203 |
}; |
| 6204 |
|
| 6205 |
/* BPF_FUNC_csum_level level values. */ |
| 6206 |
enum { |
| 6207 |
BPF_CSUM_LEVEL_QUERY, |
| 6208 |
BPF_CSUM_LEVEL_INC, |
| 6209 |
BPF_CSUM_LEVEL_DEC, |
| 6210 |
BPF_CSUM_LEVEL_RESET, |
| 6211 |
}; |
| 6212 |
|
| 6213 |
/* BPF_FUNC_skb_adjust_room flags. */ |
| 6214 |
enum { |
| 6215 |
BPF_F_ADJ_ROOM_FIXED_GSO = (1ULL << 0), |
| 6216 |
BPF_F_ADJ_ROOM_ENCAP_L3_IPV4 = (1ULL << 1), |
| 6217 |
BPF_F_ADJ_ROOM_ENCAP_L3_IPV6 = (1ULL << 2), |
| 6218 |
BPF_F_ADJ_ROOM_ENCAP_L4_GRE = (1ULL << 3), |
| 6219 |
BPF_F_ADJ_ROOM_ENCAP_L4_UDP = (1ULL << 4), |
| 6220 |
BPF_F_ADJ_ROOM_NO_CSUM_RESET = (1ULL << 5), |
| 6221 |
BPF_F_ADJ_ROOM_ENCAP_L2_ETH = (1ULL << 6), |
| 6222 |
BPF_F_ADJ_ROOM_DECAP_L3_IPV4 = (1ULL << 7), |
| 6223 |
BPF_F_ADJ_ROOM_DECAP_L3_IPV6 = (1ULL << 8), |
| 6224 |
}; |
| 6225 |
|
| 6226 |
enum { |
| 6227 |
BPF_ADJ_ROOM_ENCAP_L2_MASK = 0xff, |
| 6228 |
BPF_ADJ_ROOM_ENCAP_L2_SHIFT = 56, |
| 6229 |
}; |
| 6230 |
|
| 6231 |
#define BPF_F_ADJ_ROOM_ENCAP_L2(len) (((__u64)len & \ |
| 6232 |
BPF_ADJ_ROOM_ENCAP_L2_MASK) \ |
| 6233 |
<< BPF_ADJ_ROOM_ENCAP_L2_SHIFT) |
| 6234 |
|
| 6235 |
/* BPF_FUNC_sysctl_get_name flags. */ |
| 6236 |
enum { |
| 6237 |
BPF_F_SYSCTL_BASE_NAME = (1ULL << 0), |
| 6238 |
}; |
| 6239 |
|
| 6240 |
/* BPF_FUNC_<kernel_obj>_storage_get flags */ |
| 6241 |
enum { |
| 6242 |
BPF_LOCAL_STORAGE_GET_F_CREATE = (1ULL << 0), |
| 6243 |
/* BPF_SK_STORAGE_GET_F_CREATE is only kept for backward compatibility |
| 6244 |
* and BPF_LOCAL_STORAGE_GET_F_CREATE must be used instead. |
| 6245 |
*/ |
| 6246 |
BPF_SK_STORAGE_GET_F_CREATE = BPF_LOCAL_STORAGE_GET_F_CREATE, |
| 6247 |
}; |
| 6248 |
|
| 6249 |
/* BPF_FUNC_read_branch_records flags. */ |
| 6250 |
enum { |
| 6251 |
BPF_F_GET_BRANCH_RECORDS_SIZE = (1ULL << 0), |
| 6252 |
}; |
| 6253 |
|
| 6254 |
/* BPF_FUNC_bpf_ringbuf_commit, BPF_FUNC_bpf_ringbuf_discard, and |
| 6255 |
* BPF_FUNC_bpf_ringbuf_output flags. |
| 6256 |
*/ |
| 6257 |
enum { |
| 6258 |
BPF_RB_NO_WAKEUP = (1ULL << 0), |
| 6259 |
BPF_RB_FORCE_WAKEUP = (1ULL << 1), |
| 6260 |
}; |
| 6261 |
|
| 6262 |
/* BPF_FUNC_bpf_ringbuf_query flags */ |
| 6263 |
enum { |
| 6264 |
BPF_RB_AVAIL_DATA = 0, |
| 6265 |
BPF_RB_RING_SIZE = 1, |
| 6266 |
BPF_RB_CONS_POS = 2, |
| 6267 |
BPF_RB_PROD_POS = 3, |
| 6268 |
BPF_RB_OVERWRITE_POS = 4, |
| 6269 |
}; |
| 6270 |
|
| 6271 |
/* BPF ring buffer constants */ |
| 6272 |
enum { |
| 6273 |
BPF_RINGBUF_BUSY_BIT = (1U << 31), |
| 6274 |
BPF_RINGBUF_DISCARD_BIT = (1U << 30), |
| 6275 |
BPF_RINGBUF_HDR_SZ = 8, |
| 6276 |
}; |
| 6277 |
|
| 6278 |
/* BPF_FUNC_sk_assign flags in bpf_sk_lookup context. */ |
| 6279 |
enum { |
| 6280 |
BPF_SK_LOOKUP_F_REPLACE = (1ULL << 0), |
| 6281 |
BPF_SK_LOOKUP_F_NO_REUSEPORT = (1ULL << 1), |
| 6282 |
}; |
| 6283 |
|
| 6284 |
/* Mode for BPF_FUNC_skb_adjust_room helper. */ |
| 6285 |
enum bpf_adj_room_mode { |
| 6286 |
BPF_ADJ_ROOM_NET, |
| 6287 |
BPF_ADJ_ROOM_MAC, |
| 6288 |
}; |
| 6289 |
|
| 6290 |
/* Mode for BPF_FUNC_skb_load_bytes_relative helper. */ |
| 6291 |
enum bpf_hdr_start_off { |
| 6292 |
BPF_HDR_START_MAC, |
| 6293 |
BPF_HDR_START_NET, |
| 6294 |
}; |
| 6295 |
|
| 6296 |
/* Encapsulation type for BPF_FUNC_lwt_push_encap helper. */ |
| 6297 |
enum bpf_lwt_encap_mode { |
| 6298 |
BPF_LWT_ENCAP_SEG6, |
| 6299 |
BPF_LWT_ENCAP_SEG6_INLINE, |
| 6300 |
BPF_LWT_ENCAP_IP, |
| 6301 |
}; |
| 6302 |
|
| 6303 |
/* Flags for bpf_bprm_opts_set helper */ |
| 6304 |
enum { |
| 6305 |
BPF_F_BPRM_SECUREEXEC = (1ULL << 0), |
| 6306 |
}; |
| 6307 |
|
| 6308 |
/* Flags for bpf_redirect and bpf_redirect_map helpers */ |
| 6309 |
enum { |
| 6310 |
BPF_F_INGRESS = (1ULL << 0), /* used for skb path */ |
| 6311 |
BPF_F_BROADCAST = (1ULL << 3), /* used for XDP path */ |
| 6312 |
BPF_F_EXCLUDE_INGRESS = (1ULL << 4), /* used for XDP path */ |
| 6313 |
#define BPF_F_REDIRECT_FLAGS (BPF_F_INGRESS | BPF_F_BROADCAST | BPF_F_EXCLUDE_INGRESS) |
| 6314 |
}; |
| 6315 |
|
| 6316 |
#define __bpf_md_ptr(type, name) \ |
| 6317 |
union { \ |
| 6318 |
type name; \ |
| 6319 |
__u64 :64; \ |
| 6320 |
} __attribute__((aligned(8))) |
| 6321 |
|
| 6322 |
/* The enum used in skb->tstamp_type. It specifies the clock type |
| 6323 |
* of the time stored in the skb->tstamp. |
| 6324 |
*/ |
| 6325 |
enum { |
| 6326 |
BPF_SKB_TSTAMP_UNSPEC = 0, /* DEPRECATED */ |
| 6327 |
BPF_SKB_TSTAMP_DELIVERY_MONO = 1, /* DEPRECATED */ |
| 6328 |
BPF_SKB_CLOCK_REALTIME = 0, |
| 6329 |
BPF_SKB_CLOCK_MONOTONIC = 1, |
| 6330 |
BPF_SKB_CLOCK_TAI = 2, |
| 6331 |
/* For any future BPF_SKB_CLOCK_* that the bpf prog cannot handle, |
| 6332 |
* the bpf prog can try to deduce it by ingress/egress/skb->sk->sk_clockid. |
| 6333 |
*/ |
| 6334 |
}; |
| 6335 |
|
| 6336 |
/* user accessible mirror of in-kernel sk_buff. |
| 6337 |
* new fields can only be added to the end of this structure |
| 6338 |
*/ |
| 6339 |
struct __sk_buff { |
| 6340 |
__u32 len; |
| 6341 |
__u32 pkt_type; |
| 6342 |
__u32 mark; |
| 6343 |
__u32 queue_mapping; |
| 6344 |
__u32 protocol; |
| 6345 |
__u32 vlan_present; |
| 6346 |
__u32 vlan_tci; |
| 6347 |
__u32 vlan_proto; |
| 6348 |
__u32 priority; |
| 6349 |
__u32 ingress_ifindex; |
| 6350 |
__u32 ifindex; |
| 6351 |
__u32 tc_index; |
| 6352 |
__u32 cb[5]; |
| 6353 |
__u32 hash; |
| 6354 |
__u32 tc_classid; |
| 6355 |
__u32 data; |
| 6356 |
__u32 data_end; |
| 6357 |
__u32 napi_id; |
| 6358 |
|
| 6359 |
/* Accessed by BPF_PROG_TYPE_sk_skb types from here to ... */ |
| 6360 |
__u32 family; |
| 6361 |
__u32 remote_ip4; /* Stored in network byte order */ |
| 6362 |
__u32 local_ip4; /* Stored in network byte order */ |
| 6363 |
__u32 remote_ip6[4]; /* Stored in network byte order */ |
| 6364 |
__u32 local_ip6[4]; /* Stored in network byte order */ |
| 6365 |
__u32 remote_port; /* Stored in network byte order */ |
| 6366 |
__u32 local_port; /* stored in host byte order */ |
| 6367 |
/* ... here. */ |
| 6368 |
|
| 6369 |
__u32 data_meta; |
| 6370 |
__bpf_md_ptr(struct bpf_flow_keys *, flow_keys); |
| 6371 |
__u64 tstamp; |
| 6372 |
__u32 wire_len; |
| 6373 |
__u32 gso_segs; |
| 6374 |
__bpf_md_ptr(struct bpf_sock *, sk); |
| 6375 |
__u32 gso_size; |
| 6376 |
__u8 tstamp_type; |
| 6377 |
__u32 :24; /* Padding, future use. */ |
| 6378 |
__u64 hwtstamp; |
| 6379 |
}; |
| 6380 |
|
| 6381 |
struct bpf_tunnel_key { |
| 6382 |
__u32 tunnel_id; |
| 6383 |
union { |
| 6384 |
__u32 remote_ipv4; |
| 6385 |
__u32 remote_ipv6[4]; |
| 6386 |
}; |
| 6387 |
__u8 tunnel_tos; |
| 6388 |
__u8 tunnel_ttl; |
| 6389 |
union { |
| 6390 |
__u16 tunnel_ext; /* compat */ |
| 6391 |
__be16 tunnel_flags; |
| 6392 |
}; |
| 6393 |
__u32 tunnel_label; |
| 6394 |
union { |
| 6395 |
__u32 local_ipv4; |
| 6396 |
__u32 local_ipv6[4]; |
| 6397 |
}; |
| 6398 |
}; |
| 6399 |
|
| 6400 |
/* user accessible mirror of in-kernel xfrm_state. |
| 6401 |
* new fields can only be added to the end of this structure |
| 6402 |
*/ |
| 6403 |
struct bpf_xfrm_state { |
| 6404 |
__u32 reqid; |
| 6405 |
__u32 spi; /* Stored in network byte order */ |
| 6406 |
__u16 family; |
| 6407 |
__u16 ext; /* Padding, future use. */ |
| 6408 |
union { |
| 6409 |
__u32 remote_ipv4; /* Stored in network byte order */ |
| 6410 |
__u32 remote_ipv6[4]; /* Stored in network byte order */ |
| 6411 |
}; |
| 6412 |
}; |
| 6413 |
|
| 6414 |
/* Generic BPF return codes which all BPF program types may support. |
| 6415 |
* The values are binary compatible with their TC_ACT_* counter-part to |
| 6416 |
* provide backwards compatibility with existing SCHED_CLS and SCHED_ACT |
| 6417 |
* programs. |
| 6418 |
* |
| 6419 |
* XDP is handled seprately, see XDP_*. |
| 6420 |
*/ |
| 6421 |
enum bpf_ret_code { |
| 6422 |
BPF_OK = 0, |
| 6423 |
/* 1 reserved */ |
| 6424 |
BPF_DROP = 2, |
| 6425 |
/* 3-6 reserved */ |
| 6426 |
BPF_REDIRECT = 7, |
| 6427 |
/* >127 are reserved for prog type specific return codes. |
| 6428 |
* |
| 6429 |
* BPF_LWT_REROUTE: used by BPF_PROG_TYPE_LWT_IN and |
| 6430 |
* BPF_PROG_TYPE_LWT_XMIT to indicate that skb had been |
| 6431 |
* changed and should be routed based on its new L3 header. |
| 6432 |
* (This is an L3 redirect, as opposed to L2 redirect |
| 6433 |
* represented by BPF_REDIRECT above). |
| 6434 |
*/ |
| 6435 |
BPF_LWT_REROUTE = 128, |
| 6436 |
/* BPF_FLOW_DISSECTOR_CONTINUE: used by BPF_PROG_TYPE_FLOW_DISSECTOR |
| 6437 |
* to indicate that no custom dissection was performed, and |
| 6438 |
* fallback to standard dissector is requested. |
| 6439 |
*/ |
| 6440 |
BPF_FLOW_DISSECTOR_CONTINUE = 129, |
| 6441 |
}; |
| 6442 |
|
| 6443 |
struct bpf_sock { |
| 6444 |
__u32 bound_dev_if; |
| 6445 |
__u32 family; |
| 6446 |
__u32 type; |
| 6447 |
__u32 protocol; |
| 6448 |
__u32 mark; |
| 6449 |
__u32 priority; |
| 6450 |
/* IP address also allows 1 and 2 bytes access */ |
| 6451 |
__u32 src_ip4; |
| 6452 |
__u32 src_ip6[4]; |
| 6453 |
__u32 src_port; /* host byte order */ |
| 6454 |
__be16 dst_port; /* network byte order */ |
| 6455 |
__u16 :16; /* zero padding */ |
| 6456 |
__u32 dst_ip4; |
| 6457 |
__u32 dst_ip6[4]; |
| 6458 |
__u32 state; |
| 6459 |
__s32 rx_queue_mapping; |
| 6460 |
}; |
| 6461 |
|
| 6462 |
struct bpf_tcp_sock { |
| 6463 |
__u32 snd_cwnd; /* Sending congestion window */ |
| 6464 |
__u32 srtt_us; /* smoothed round trip time << 3 in usecs */ |
| 6465 |
__u32 rtt_min; |
| 6466 |
__u32 snd_ssthresh; /* Slow start size threshold */ |
| 6467 |
__u32 rcv_nxt; /* What we want to receive next */ |
| 6468 |
__u32 snd_nxt; /* Next sequence we send */ |
| 6469 |
__u32 snd_una; /* First byte we want an ack for */ |
| 6470 |
__u32 mss_cache; /* Cached effective mss, not including SACKS */ |
| 6471 |
__u32 ecn_flags; /* ECN status bits. */ |
| 6472 |
__u32 rate_delivered; /* saved rate sample: packets delivered */ |
| 6473 |
__u32 rate_interval_us; /* saved rate sample: time elapsed */ |
| 6474 |
__u32 packets_out; /* Packets which are "in flight" */ |
| 6475 |
__u32 retrans_out; /* Retransmitted packets out */ |
| 6476 |
__u32 total_retrans; /* Total retransmits for entire connection */ |
| 6477 |
__u32 segs_in; /* RFC4898 tcpEStatsPerfSegsIn |
| 6478 |
* total number of segments in. |
| 6479 |
*/ |
| 6480 |
__u32 data_segs_in; /* RFC4898 tcpEStatsPerfDataSegsIn |
| 6481 |
* total number of data segments in. |
| 6482 |
*/ |
| 6483 |
__u32 segs_out; /* RFC4898 tcpEStatsPerfSegsOut |
| 6484 |
* The total number of segments sent. |
| 6485 |
*/ |
| 6486 |
__u32 data_segs_out; /* RFC4898 tcpEStatsPerfDataSegsOut |
| 6487 |
* total number of data segments sent. |
| 6488 |
*/ |
| 6489 |
__u32 lost_out; /* Lost packets */ |
| 6490 |
__u32 sacked_out; /* SACK'd packets */ |
| 6491 |
__u64 bytes_received; /* RFC4898 tcpEStatsAppHCThruOctetsReceived |
| 6492 |
* sum(delta(rcv_nxt)), or how many bytes |
| 6493 |
* were acked. |
| 6494 |
*/ |
| 6495 |
__u64 bytes_acked; /* RFC4898 tcpEStatsAppHCThruOctetsAcked |
| 6496 |
* sum(delta(snd_una)), or how many bytes |
| 6497 |
* were acked. |
| 6498 |
*/ |
| 6499 |
__u32 dsack_dups; /* RFC4898 tcpEStatsStackDSACKDups |
| 6500 |
* total number of DSACK blocks received |
| 6501 |
*/ |
| 6502 |
__u32 delivered; /* Total data packets delivered incl. rexmits */ |
| 6503 |
__u32 delivered_ce; /* Like the above but only ECE marked packets */ |
| 6504 |
__u32 icsk_retransmits; /* Number of unrecovered [RTO] timeouts */ |
| 6505 |
}; |
| 6506 |
|
| 6507 |
struct bpf_sock_tuple { |
| 6508 |
union { |
| 6509 |
struct { |
| 6510 |
__be32 saddr; |
| 6511 |
__be32 daddr; |
| 6512 |
__be16 sport; |
| 6513 |
__be16 dport; |
| 6514 |
} ipv4; |
| 6515 |
struct { |
| 6516 |
__be32 saddr[4]; |
| 6517 |
__be32 daddr[4]; |
| 6518 |
__be16 sport; |
| 6519 |
__be16 dport; |
| 6520 |
} ipv6; |
| 6521 |
}; |
| 6522 |
}; |
| 6523 |
|
| 6524 |
/* (Simplified) user return codes for tcx prog type. |
| 6525 |
* A valid tcx program must return one of these defined values. All other |
| 6526 |
* return codes are reserved for future use. Must remain compatible with |
| 6527 |
* their TC_ACT_* counter-parts. For compatibility in behavior, unknown |
| 6528 |
* return codes are mapped to TCX_NEXT. |
| 6529 |
*/ |
| 6530 |
enum tcx_action_base { |
| 6531 |
TCX_NEXT = -1, |
| 6532 |
TCX_PASS = 0, |
| 6533 |
TCX_DROP = 2, |
| 6534 |
TCX_REDIRECT = 7, |
| 6535 |
}; |
| 6536 |
|
| 6537 |
struct bpf_xdp_sock { |
| 6538 |
__u32 queue_id; |
| 6539 |
}; |
| 6540 |
|
| 6541 |
#define XDP_PACKET_HEADROOM 256 |
| 6542 |
|
| 6543 |
/* User return codes for XDP prog type. |
| 6544 |
* A valid XDP program must return one of these defined values. All other |
| 6545 |
* return codes are reserved for future use. Unknown return codes will |
| 6546 |
* result in packet drops and a warning via bpf_warn_invalid_xdp_action(). |
| 6547 |
*/ |
| 6548 |
enum xdp_action { |
| 6549 |
XDP_ABORTED = 0, |
| 6550 |
XDP_DROP, |
| 6551 |
XDP_PASS, |
| 6552 |
XDP_TX, |
| 6553 |
XDP_REDIRECT, |
| 6554 |
}; |
| 6555 |
|
| 6556 |
/* user accessible metadata for XDP packet hook |
| 6557 |
* new fields must be added to the end of this structure |
| 6558 |
*/ |
| 6559 |
struct xdp_md { |
| 6560 |
__u32 data; |
| 6561 |
__u32 data_end; |
| 6562 |
__u32 data_meta; |
| 6563 |
/* Below access go through struct xdp_rxq_info */ |
| 6564 |
__u32 ingress_ifindex; /* rxq->dev->ifindex */ |
| 6565 |
__u32 rx_queue_index; /* rxq->queue_index */ |
| 6566 |
|
| 6567 |
__u32 egress_ifindex; /* txq->dev->ifindex */ |
| 6568 |
}; |
| 6569 |
|
| 6570 |
/* DEVMAP map-value layout |
| 6571 |
* |
| 6572 |
* The struct data-layout of map-value is a configuration interface. |
| 6573 |
* New members can only be added to the end of this structure. |
| 6574 |
*/ |
| 6575 |
struct bpf_devmap_val { |
| 6576 |
__u32 ifindex; /* device index */ |
| 6577 |
union { |
| 6578 |
int fd; /* prog fd on map write */ |
| 6579 |
__u32 id; /* prog id on map read */ |
| 6580 |
} bpf_prog; |
| 6581 |
}; |
| 6582 |
|
| 6583 |
/* CPUMAP map-value layout |
| 6584 |
* |
| 6585 |
* The struct data-layout of map-value is a configuration interface. |
| 6586 |
* New members can only be added to the end of this structure. |
| 6587 |
*/ |
| 6588 |
struct bpf_cpumap_val { |
| 6589 |
__u32 qsize; /* queue size to remote target CPU */ |
| 6590 |
union { |
| 6591 |
int fd; /* prog fd on map write */ |
| 6592 |
__u32 id; /* prog id on map read */ |
| 6593 |
} bpf_prog; |
| 6594 |
}; |
| 6595 |
|
| 6596 |
enum sk_action { |
| 6597 |
SK_DROP = 0, |
| 6598 |
SK_PASS, |
| 6599 |
}; |
| 6600 |
|
| 6601 |
/* user accessible metadata for SK_MSG packet hook, new fields must |
| 6602 |
* be added to the end of this structure |
| 6603 |
*/ |
| 6604 |
struct sk_msg_md { |
| 6605 |
__bpf_md_ptr(void *, data); |
| 6606 |
__bpf_md_ptr(void *, data_end); |
| 6607 |
|
| 6608 |
__u32 family; |
| 6609 |
__u32 remote_ip4; /* Stored in network byte order */ |
| 6610 |
__u32 local_ip4; /* Stored in network byte order */ |
| 6611 |
__u32 remote_ip6[4]; /* Stored in network byte order */ |
| 6612 |
__u32 local_ip6[4]; /* Stored in network byte order */ |
| 6613 |
__u32 remote_port; /* Stored in network byte order */ |
| 6614 |
__u32 local_port; /* stored in host byte order */ |
| 6615 |
__u32 size; /* Total size of sk_msg */ |
| 6616 |
|
| 6617 |
__bpf_md_ptr(struct bpf_sock *, sk); /* current socket */ |
| 6618 |
}; |
| 6619 |
|
| 6620 |
struct sk_reuseport_md { |
| 6621 |
/* |
| 6622 |
* Start of directly accessible data. It begins from |
| 6623 |
* the tcp/udp header. |
| 6624 |
*/ |
| 6625 |
__bpf_md_ptr(void *, data); |
| 6626 |
/* End of directly accessible data */ |
| 6627 |
__bpf_md_ptr(void *, data_end); |
| 6628 |
/* |
| 6629 |
* Total length of packet (starting from the tcp/udp header). |
| 6630 |
* Note that the directly accessible bytes (data_end - data) |
| 6631 |
* could be less than this "len". Those bytes could be |
| 6632 |
* indirectly read by a helper "bpf_skb_load_bytes()". |
| 6633 |
*/ |
| 6634 |
__u32 len; |
| 6635 |
/* |
| 6636 |
* Eth protocol in the mac header (network byte order). e.g. |
| 6637 |
* ETH_P_IP(0x0800) and ETH_P_IPV6(0x86DD) |
| 6638 |
*/ |
| 6639 |
__u32 eth_protocol; |
| 6640 |
__u32 ip_protocol; /* IP protocol. e.g. IPPROTO_TCP, IPPROTO_UDP */ |
| 6641 |
__u32 bind_inany; /* Is sock bound to an INANY address? */ |
| 6642 |
__u32 hash; /* A hash of the packet 4 tuples */ |
| 6643 |
/* When reuse->migrating_sk is NULL, it is selecting a sk for the |
| 6644 |
* new incoming connection request (e.g. selecting a listen sk for |
| 6645 |
* the received SYN in the TCP case). reuse->sk is one of the sk |
| 6646 |
* in the reuseport group. The bpf prog can use reuse->sk to learn |
| 6647 |
* the local listening ip/port without looking into the skb. |
| 6648 |
* |
| 6649 |
* When reuse->migrating_sk is not NULL, reuse->sk is closed and |
| 6650 |
* reuse->migrating_sk is the socket that needs to be migrated |
| 6651 |
* to another listening socket. migrating_sk could be a fullsock |
| 6652 |
* sk that is fully established or a reqsk that is in-the-middle |
| 6653 |
* of 3-way handshake. |
| 6654 |
*/ |
| 6655 |
__bpf_md_ptr(struct bpf_sock *, sk); |
| 6656 |
__bpf_md_ptr(struct bpf_sock *, migrating_sk); |
| 6657 |
}; |
| 6658 |
|
| 6659 |
#define BPF_TAG_SIZE 8 |
| 6660 |
|
| 6661 |
struct bpf_prog_info { |
| 6662 |
__u32 type; |
| 6663 |
__u32 id; |
| 6664 |
__u8 tag[BPF_TAG_SIZE]; |
| 6665 |
__u32 jited_prog_len; |
| 6666 |
__u32 xlated_prog_len; |
| 6667 |
__aligned_u64 jited_prog_insns; |
| 6668 |
__aligned_u64 xlated_prog_insns; |
| 6669 |
__u64 load_time; /* ns since boottime */ |
| 6670 |
__u32 created_by_uid; |
| 6671 |
__u32 nr_map_ids; |
| 6672 |
__aligned_u64 map_ids; |
| 6673 |
char name[BPF_OBJ_NAME_LEN]; |
| 6674 |
__u32 ifindex; |
| 6675 |
__u32 gpl_compatible:1; |
| 6676 |
__u32 :31; /* alignment pad */ |
| 6677 |
__u64 netns_dev; |
| 6678 |
__u64 netns_ino; |
| 6679 |
__u32 nr_jited_ksyms; |
| 6680 |
__u32 nr_jited_func_lens; |
| 6681 |
__aligned_u64 jited_ksyms; |
| 6682 |
__aligned_u64 jited_func_lens; |
| 6683 |
__u32 btf_id; |
| 6684 |
__u32 func_info_rec_size; |
| 6685 |
__aligned_u64 func_info; |
| 6686 |
__u32 nr_func_info; |
| 6687 |
__u32 nr_line_info; |
| 6688 |
__aligned_u64 line_info; |
| 6689 |
__aligned_u64 jited_line_info; |
| 6690 |
__u32 nr_jited_line_info; |
| 6691 |
__u32 line_info_rec_size; |
| 6692 |
__u32 jited_line_info_rec_size; |
| 6693 |
__u32 nr_prog_tags; |
| 6694 |
__aligned_u64 prog_tags; |
| 6695 |
__u64 run_time_ns; |
| 6696 |
__u64 run_cnt; |
| 6697 |
__u64 recursion_misses; |
| 6698 |
__u32 verified_insns; |
| 6699 |
__u32 attach_btf_obj_id; |
| 6700 |
__u32 attach_btf_id; |
| 6701 |
} __attribute__((aligned(8))); |
| 6702 |
|
| 6703 |
struct bpf_map_info { |
| 6704 |
__u32 type; |
| 6705 |
__u32 id; |
| 6706 |
__u32 key_size; |
| 6707 |
__u32 value_size; |
| 6708 |
__u32 max_entries; |
| 6709 |
__u32 map_flags; |
| 6710 |
char name[BPF_OBJ_NAME_LEN]; |
| 6711 |
__u32 ifindex; |
| 6712 |
__u32 btf_vmlinux_value_type_id; |
| 6713 |
__u64 netns_dev; |
| 6714 |
__u64 netns_ino; |
| 6715 |
__u32 btf_id; |
| 6716 |
__u32 btf_key_type_id; |
| 6717 |
__u32 btf_value_type_id; |
| 6718 |
__u32 btf_vmlinux_id; |
| 6719 |
__u64 map_extra; |
| 6720 |
__aligned_u64 hash; |
| 6721 |
__u32 hash_size; |
| 6722 |
} __attribute__((aligned(8))); |
| 6723 |
|
| 6724 |
struct bpf_btf_info { |
| 6725 |
__aligned_u64 btf; |
| 6726 |
__u32 btf_size; |
| 6727 |
__u32 id; |
| 6728 |
__aligned_u64 name; |
| 6729 |
__u32 name_len; |
| 6730 |
__u32 kernel_btf; |
| 6731 |
} __attribute__((aligned(8))); |
| 6732 |
|
| 6733 |
struct bpf_link_info { |
| 6734 |
__u32 type; |
| 6735 |
__u32 id; |
| 6736 |
__u32 prog_id; |
| 6737 |
union { |
| 6738 |
struct { |
| 6739 |
__aligned_u64 tp_name; /* in/out: tp_name buffer ptr */ |
| 6740 |
__u32 tp_name_len; /* in/out: tp_name buffer len */ |
| 6741 |
__u32 :32; |
| 6742 |
__u64 cookie; |
| 6743 |
} raw_tracepoint; |
| 6744 |
struct { |
| 6745 |
__u32 attach_type; |
| 6746 |
__u32 target_obj_id; /* prog_id for PROG_EXT, otherwise btf object id */ |
| 6747 |
__u32 target_btf_id; /* BTF type id inside the object */ |
| 6748 |
__u32 :32; |
| 6749 |
__u64 cookie; |
| 6750 |
} tracing; |
| 6751 |
struct { |
| 6752 |
__u64 cgroup_id; |
| 6753 |
__u32 attach_type; |
| 6754 |
} cgroup; |
| 6755 |
struct { |
| 6756 |
__aligned_u64 target_name; /* in/out: target_name buffer ptr */ |
| 6757 |
__u32 target_name_len; /* in/out: target_name buffer len */ |
| 6758 |
|
| 6759 |
/* If the iter specific field is 32 bits, it can be put |
| 6760 |
* in the first or second union. Otherwise it should be |
| 6761 |
* put in the second union. |
| 6762 |
*/ |
| 6763 |
union { |
| 6764 |
struct { |
| 6765 |
__u32 map_id; |
| 6766 |
} map; |
| 6767 |
}; |
| 6768 |
union { |
| 6769 |
struct { |
| 6770 |
__u64 cgroup_id; |
| 6771 |
__u32 order; |
| 6772 |
} cgroup; |
| 6773 |
struct { |
| 6774 |
__u32 tid; |
| 6775 |
__u32 pid; |
| 6776 |
} task; |
| 6777 |
}; |
| 6778 |
} iter; |
| 6779 |
struct { |
| 6780 |
__u32 netns_ino; |
| 6781 |
__u32 attach_type; |
| 6782 |
} netns; |
| 6783 |
struct { |
| 6784 |
__u32 ifindex; |
| 6785 |
} xdp; |
| 6786 |
struct { |
| 6787 |
__u32 map_id; |
| 6788 |
} struct_ops; |
| 6789 |
struct { |
| 6790 |
__u32 pf; |
| 6791 |
__u32 hooknum; |
| 6792 |
__s32 priority; |
| 6793 |
__u32 flags; |
| 6794 |
} netfilter; |
| 6795 |
struct { |
| 6796 |
__aligned_u64 addrs; |
| 6797 |
__u32 count; /* in/out: kprobe_multi function count */ |
| 6798 |
__u32 flags; |
| 6799 |
__u64 missed; |
| 6800 |
__aligned_u64 cookies; |
| 6801 |
} kprobe_multi; |
| 6802 |
struct { |
| 6803 |
__aligned_u64 path; |
| 6804 |
__aligned_u64 offsets; |
| 6805 |
__aligned_u64 ref_ctr_offsets; |
| 6806 |
__aligned_u64 cookies; |
| 6807 |
__u32 path_size; /* in/out: real path size on success, including zero byte */ |
| 6808 |
__u32 count; /* in/out: uprobe_multi offsets/ref_ctr_offsets/cookies count */ |
| 6809 |
__u32 flags; |
| 6810 |
__u32 pid; |
| 6811 |
} uprobe_multi; |
| 6812 |
struct { |
| 6813 |
__u32 type; /* enum bpf_perf_event_type */ |
| 6814 |
__u32 :32; |
| 6815 |
union { |
| 6816 |
struct { |
| 6817 |
__aligned_u64 file_name; /* in/out */ |
| 6818 |
__u32 name_len; |
| 6819 |
__u32 offset; /* offset from file_name */ |
| 6820 |
__u64 cookie; |
| 6821 |
__u64 ref_ctr_offset; |
| 6822 |
} uprobe; /* BPF_PERF_EVENT_UPROBE, BPF_PERF_EVENT_URETPROBE */ |
| 6823 |
struct { |
| 6824 |
__aligned_u64 func_name; /* in/out */ |
| 6825 |
__u32 name_len; |
| 6826 |
__u32 offset; /* offset from func_name */ |
| 6827 |
__u64 addr; |
| 6828 |
__u64 missed; |
| 6829 |
__u64 cookie; |
| 6830 |
} kprobe; /* BPF_PERF_EVENT_KPROBE, BPF_PERF_EVENT_KRETPROBE */ |
| 6831 |
struct { |
| 6832 |
__aligned_u64 tp_name; /* in/out */ |
| 6833 |
__u32 name_len; |
| 6834 |
__u32 :32; |
| 6835 |
__u64 cookie; |
| 6836 |
} tracepoint; /* BPF_PERF_EVENT_TRACEPOINT */ |
| 6837 |
struct { |
| 6838 |
__u64 config; |
| 6839 |
__u32 type; |
| 6840 |
__u32 :32; |
| 6841 |
__u64 cookie; |
| 6842 |
} event; /* BPF_PERF_EVENT_EVENT */ |
| 6843 |
}; |
| 6844 |
} perf_event; |
| 6845 |
struct { |
| 6846 |
__u32 ifindex; |
| 6847 |
__u32 attach_type; |
| 6848 |
} tcx; |
| 6849 |
struct { |
| 6850 |
__u32 ifindex; |
| 6851 |
__u32 attach_type; |
| 6852 |
} netkit; |
| 6853 |
struct { |
| 6854 |
__u32 map_id; |
| 6855 |
__u32 attach_type; |
| 6856 |
} sockmap; |
| 6857 |
}; |
| 6858 |
} __attribute__((aligned(8))); |
| 6859 |
|
| 6860 |
struct bpf_token_info { |
| 6861 |
__u64 allowed_cmds; |
| 6862 |
__u64 allowed_maps; |
| 6863 |
__u64 allowed_progs; |
| 6864 |
__u64 allowed_attachs; |
| 6865 |
} __attribute__((aligned(8))); |
| 6866 |
|
| 6867 |
/* User bpf_sock_addr struct to access socket fields and sockaddr struct passed |
| 6868 |
* by user and intended to be used by socket (e.g. to bind to, depends on |
| 6869 |
* attach type). |
| 6870 |
*/ |
| 6871 |
struct bpf_sock_addr { |
| 6872 |
__u32 user_family; /* Allows 4-byte read, but no write. */ |
| 6873 |
__u32 user_ip4; /* Allows 1,2,4-byte read and 4-byte write. |
| 6874 |
* Stored in network byte order. |
| 6875 |
*/ |
| 6876 |
__u32 user_ip6[4]; /* Allows 1,2,4,8-byte read and 4,8-byte write. |
| 6877 |
* Stored in network byte order. |
| 6878 |
*/ |
| 6879 |
__u32 user_port; /* Allows 1,2,4-byte read and 4-byte write. |
| 6880 |
* Stored in network byte order |
| 6881 |
*/ |
| 6882 |
__u32 family; /* Allows 4-byte read, but no write */ |
| 6883 |
__u32 type; /* Allows 4-byte read, but no write */ |
| 6884 |
__u32 protocol; /* Allows 4-byte read, but no write */ |
| 6885 |
__u32 msg_src_ip4; /* Allows 1,2,4-byte read and 4-byte write. |
| 6886 |
* Stored in network byte order. |
| 6887 |
*/ |
| 6888 |
__u32 msg_src_ip6[4]; /* Allows 1,2,4,8-byte read and 4,8-byte write. |
| 6889 |
* Stored in network byte order. |
| 6890 |
*/ |
| 6891 |
__bpf_md_ptr(struct bpf_sock *, sk); |
| 6892 |
}; |
| 6893 |
|
| 6894 |
/* User bpf_sock_ops struct to access socket values and specify request ops |
| 6895 |
* and their replies. |
| 6896 |
* Some of this fields are in network (bigendian) byte order and may need |
| 6897 |
* to be converted before use (bpf_ntohl() defined in samples/bpf/bpf_endian.h). |
| 6898 |
* New fields can only be added at the end of this structure |
| 6899 |
*/ |
| 6900 |
struct bpf_sock_ops { |
| 6901 |
__u32 op; |
| 6902 |
union { |
| 6903 |
__u32 args[4]; /* Optionally passed to bpf program */ |
| 6904 |
__u32 reply; /* Returned by bpf program */ |
| 6905 |
__u32 replylong[4]; /* Optionally returned by bpf prog */ |
| 6906 |
}; |
| 6907 |
__u32 family; |
| 6908 |
__u32 remote_ip4; /* Stored in network byte order */ |
| 6909 |
__u32 local_ip4; /* Stored in network byte order */ |
| 6910 |
__u32 remote_ip6[4]; /* Stored in network byte order */ |
| 6911 |
__u32 local_ip6[4]; /* Stored in network byte order */ |
| 6912 |
__u32 remote_port; /* Stored in network byte order */ |
| 6913 |
__u32 local_port; /* stored in host byte order */ |
| 6914 |
__u32 is_fullsock; /* Some TCP fields are only valid if |
| 6915 |
* there is a full socket. If not, the |
| 6916 |
* fields read as zero. |
| 6917 |
*/ |
| 6918 |
__u32 snd_cwnd; |
| 6919 |
__u32 srtt_us; /* Averaged RTT << 3 in usecs */ |
| 6920 |
__u32 bpf_sock_ops_cb_flags; /* flags defined in uapi/linux/tcp.h */ |
| 6921 |
__u32 state; |
| 6922 |
__u32 rtt_min; |
| 6923 |
__u32 snd_ssthresh; |
| 6924 |
__u32 rcv_nxt; |
| 6925 |
__u32 snd_nxt; |
| 6926 |
__u32 snd_una; |
| 6927 |
__u32 mss_cache; |
| 6928 |
__u32 ecn_flags; |
| 6929 |
__u32 rate_delivered; |
| 6930 |
__u32 rate_interval_us; |
| 6931 |
__u32 packets_out; |
| 6932 |
__u32 retrans_out; |
| 6933 |
__u32 total_retrans; |
| 6934 |
__u32 segs_in; |
| 6935 |
__u32 data_segs_in; |
| 6936 |
__u32 segs_out; |
| 6937 |
__u32 data_segs_out; |
| 6938 |
__u32 lost_out; |
| 6939 |
__u32 sacked_out; |
| 6940 |
__u32 sk_txhash; |
| 6941 |
__u64 bytes_received; |
| 6942 |
__u64 bytes_acked; |
| 6943 |
__bpf_md_ptr(struct bpf_sock *, sk); |
| 6944 |
/* [skb_data, skb_data_end) covers the whole TCP header. |
| 6945 |
* |
| 6946 |
* BPF_SOCK_OPS_PARSE_HDR_OPT_CB: The packet received |
| 6947 |
* BPF_SOCK_OPS_HDR_OPT_LEN_CB: Not useful because the |
| 6948 |
* header has not been written. |
| 6949 |
* BPF_SOCK_OPS_WRITE_HDR_OPT_CB: The header and options have |
| 6950 |
* been written so far. |
| 6951 |
* BPF_SOCK_OPS_ACTIVE_ESTABLISHED_CB: The SYNACK that concludes |
| 6952 |
* the 3WHS. |
| 6953 |
* BPF_SOCK_OPS_PASSIVE_ESTABLISHED_CB: The ACK that concludes |
| 6954 |
* the 3WHS. |
| 6955 |
* |
| 6956 |
* bpf_load_hdr_opt() can also be used to read a particular option. |
| 6957 |
*/ |
| 6958 |
__bpf_md_ptr(void *, skb_data); |
| 6959 |
__bpf_md_ptr(void *, skb_data_end); |
| 6960 |
__u32 skb_len; /* The total length of a packet. |
| 6961 |
* It includes the header, options, |
| 6962 |
* and payload. |
| 6963 |
*/ |
| 6964 |
__u32 skb_tcp_flags; /* tcp_flags of the header. It provides |
| 6965 |
* an easy way to check for tcp_flags |
| 6966 |
* without parsing skb_data. |
| 6967 |
* |
| 6968 |
* In particular, the skb_tcp_flags |
| 6969 |
* will still be available in |
| 6970 |
* BPF_SOCK_OPS_HDR_OPT_LEN even though |
| 6971 |
* the outgoing header has not |
| 6972 |
* been written yet. |
| 6973 |
*/ |
| 6974 |
__u64 skb_hwtstamp; |
| 6975 |
}; |
| 6976 |
|
| 6977 |
/* Definitions for bpf_sock_ops_cb_flags */ |
| 6978 |
enum { |
| 6979 |
BPF_SOCK_OPS_RTO_CB_FLAG = (1<<0), |
| 6980 |
BPF_SOCK_OPS_RETRANS_CB_FLAG = (1<<1), |
| 6981 |
BPF_SOCK_OPS_STATE_CB_FLAG = (1<<2), |
| 6982 |
BPF_SOCK_OPS_RTT_CB_FLAG = (1<<3), |
| 6983 |
/* Call bpf for all received TCP headers. The bpf prog will be |
| 6984 |
* called under sock_ops->op == BPF_SOCK_OPS_PARSE_HDR_OPT_CB |
| 6985 |
* |
| 6986 |
* Please refer to the comment in BPF_SOCK_OPS_PARSE_HDR_OPT_CB |
| 6987 |
* for the header option related helpers that will be useful |
| 6988 |
* to the bpf programs. |
| 6989 |
* |
| 6990 |
* It could be used at the client/active side (i.e. connect() side) |
| 6991 |
* when the server told it that the server was in syncookie |
| 6992 |
* mode and required the active side to resend the bpf-written |
| 6993 |
* options. The active side can keep writing the bpf-options until |
| 6994 |
* it received a valid packet from the server side to confirm |
| 6995 |
* the earlier packet (and options) has been received. The later |
| 6996 |
* example patch is using it like this at the active side when the |
| 6997 |
* server is in syncookie mode. |
| 6998 |
* |
| 6999 |
* The bpf prog will usually turn this off in the common cases. |
| 7000 |
*/ |
| 7001 |
BPF_SOCK_OPS_PARSE_ALL_HDR_OPT_CB_FLAG = (1<<4), |
| 7002 |
/* Call bpf when kernel has received a header option that |
| 7003 |
* the kernel cannot handle. The bpf prog will be called under |
| 7004 |
* sock_ops->op == BPF_SOCK_OPS_PARSE_HDR_OPT_CB. |
| 7005 |
* |
| 7006 |
* Please refer to the comment in BPF_SOCK_OPS_PARSE_HDR_OPT_CB |
| 7007 |
* for the header option related helpers that will be useful |
| 7008 |
* to the bpf programs. |
| 7009 |
*/ |
| 7010 |
BPF_SOCK_OPS_PARSE_UNKNOWN_HDR_OPT_CB_FLAG = (1<<5), |
| 7011 |
/* Call bpf when the kernel is writing header options for the |
| 7012 |
* outgoing packet. The bpf prog will first be called |
| 7013 |
* to reserve space in a skb under |
| 7014 |
* sock_ops->op == BPF_SOCK_OPS_HDR_OPT_LEN_CB. Then |
| 7015 |
* the bpf prog will be called to write the header option(s) |
| 7016 |
* under sock_ops->op == BPF_SOCK_OPS_WRITE_HDR_OPT_CB. |
| 7017 |
* |
| 7018 |
* Please refer to the comment in BPF_SOCK_OPS_HDR_OPT_LEN_CB |
| 7019 |
* and BPF_SOCK_OPS_WRITE_HDR_OPT_CB for the header option |
| 7020 |
* related helpers that will be useful to the bpf programs. |
| 7021 |
* |
| 7022 |
* The kernel gets its chance to reserve space and write |
| 7023 |
* options first before the BPF program does. |
| 7024 |
*/ |
| 7025 |
BPF_SOCK_OPS_WRITE_HDR_OPT_CB_FLAG = (1<<6), |
| 7026 |
/* Mask of all currently supported cb flags */ |
| 7027 |
BPF_SOCK_OPS_ALL_CB_FLAGS = 0x7F, |
| 7028 |
}; |
| 7029 |
|
| 7030 |
enum { |
| 7031 |
SK_BPF_CB_TX_TIMESTAMPING = 1<<0, |
| 7032 |
SK_BPF_CB_MASK = (SK_BPF_CB_TX_TIMESTAMPING - 1) | |
| 7033 |
SK_BPF_CB_TX_TIMESTAMPING |
| 7034 |
}; |
| 7035 |
|
| 7036 |
/* List of known BPF sock_ops operators. |
| 7037 |
* New entries can only be added at the end |
| 7038 |
*/ |
| 7039 |
enum { |
| 7040 |
BPF_SOCK_OPS_VOID, |
| 7041 |
BPF_SOCK_OPS_TIMEOUT_INIT, /* Should return SYN-RTO value to use or |
| 7042 |
* -1 if default value should be used |
| 7043 |
*/ |
| 7044 |
BPF_SOCK_OPS_RWND_INIT, /* Should return initial advertized |
| 7045 |
* window (in packets) or -1 if default |
| 7046 |
* value should be used |
| 7047 |
*/ |
| 7048 |
BPF_SOCK_OPS_TCP_CONNECT_CB, /* Calls BPF program right before an |
| 7049 |
* active connection is initialized |
| 7050 |
*/ |
| 7051 |
BPF_SOCK_OPS_ACTIVE_ESTABLISHED_CB, /* Calls BPF program when an |
| 7052 |
* active connection is |
| 7053 |
* established |
| 7054 |
*/ |
| 7055 |
BPF_SOCK_OPS_PASSIVE_ESTABLISHED_CB, /* Calls BPF program when a |
| 7056 |
* passive connection is |
| 7057 |
* established |
| 7058 |
*/ |
| 7059 |
BPF_SOCK_OPS_NEEDS_ECN, /* If connection's congestion control |
| 7060 |
* needs ECN |
| 7061 |
*/ |
| 7062 |
BPF_SOCK_OPS_BASE_RTT, /* Get base RTT. The correct value is |
| 7063 |
* based on the path and may be |
| 7064 |
* dependent on the congestion control |
| 7065 |
* algorithm. In general it indicates |
| 7066 |
* a congestion threshold. RTTs above |
| 7067 |
* this indicate congestion |
| 7068 |
*/ |
| 7069 |
BPF_SOCK_OPS_RTO_CB, /* Called when an RTO has triggered. |
| 7070 |
* Arg1: value of icsk_retransmits |
| 7071 |
* Arg2: value of icsk_rto |
| 7072 |
* Arg3: whether RTO has expired |
| 7073 |
*/ |
| 7074 |
BPF_SOCK_OPS_RETRANS_CB, /* Called when skb is retransmitted. |
| 7075 |
* Arg1: sequence number of 1st byte |
| 7076 |
* Arg2: # segments |
| 7077 |
* Arg3: return value of |
| 7078 |
* tcp_transmit_skb (0 => success) |
| 7079 |
*/ |
| 7080 |
BPF_SOCK_OPS_STATE_CB, /* Called when TCP changes state. |
| 7081 |
* Arg1: old_state |
| 7082 |
* Arg2: new_state |
| 7083 |
*/ |
| 7084 |
BPF_SOCK_OPS_TCP_LISTEN_CB, /* Called on listen(2), right after |
| 7085 |
* socket transition to LISTEN state. |
| 7086 |
*/ |
| 7087 |
BPF_SOCK_OPS_RTT_CB, /* Called on every RTT. |
| 7088 |
* Arg1: measured RTT input (mrtt) |
| 7089 |
* Arg2: updated srtt |
| 7090 |
*/ |
| 7091 |
BPF_SOCK_OPS_PARSE_HDR_OPT_CB, /* Parse the header option. |
| 7092 |
* It will be called to handle |
| 7093 |
* the packets received at |
| 7094 |
* an already established |
| 7095 |
* connection. |
| 7096 |
* |
| 7097 |
* sock_ops->skb_data: |
| 7098 |
* Referring to the received skb. |
| 7099 |
* It covers the TCP header only. |
| 7100 |
* |
| 7101 |
* bpf_load_hdr_opt() can also |
| 7102 |
* be used to search for a |
| 7103 |
* particular option. |
| 7104 |
*/ |
| 7105 |
BPF_SOCK_OPS_HDR_OPT_LEN_CB, /* Reserve space for writing the |
| 7106 |
* header option later in |
| 7107 |
* BPF_SOCK_OPS_WRITE_HDR_OPT_CB. |
| 7108 |
* Arg1: bool want_cookie. (in |
| 7109 |
* writing SYNACK only) |
| 7110 |
* |
| 7111 |
* sock_ops->skb_data: |
| 7112 |
* Not available because no header has |
| 7113 |
* been written yet. |
| 7114 |
* |
| 7115 |
* sock_ops->skb_tcp_flags: |
| 7116 |
* The tcp_flags of the |
| 7117 |
* outgoing skb. (e.g. SYN, ACK, FIN). |
| 7118 |
* |
| 7119 |
* bpf_reserve_hdr_opt() should |
| 7120 |
* be used to reserve space. |
| 7121 |
*/ |
| 7122 |
BPF_SOCK_OPS_WRITE_HDR_OPT_CB, /* Write the header options |
| 7123 |
* Arg1: bool want_cookie. (in |
| 7124 |
* writing SYNACK only) |
| 7125 |
* |
| 7126 |
* sock_ops->skb_data: |
| 7127 |
* Referring to the outgoing skb. |
| 7128 |
* It covers the TCP header |
| 7129 |
* that has already been written |
| 7130 |
* by the kernel and the |
| 7131 |
* earlier bpf-progs. |
| 7132 |
* |
| 7133 |
* sock_ops->skb_tcp_flags: |
| 7134 |
* The tcp_flags of the outgoing |
| 7135 |
* skb. (e.g. SYN, ACK, FIN). |
| 7136 |
* |
| 7137 |
* bpf_store_hdr_opt() should |
| 7138 |
* be used to write the |
| 7139 |
* option. |
| 7140 |
* |
| 7141 |
* bpf_load_hdr_opt() can also |
| 7142 |
* be used to search for a |
| 7143 |
* particular option that |
| 7144 |
* has already been written |
| 7145 |
* by the kernel or the |
| 7146 |
* earlier bpf-progs. |
| 7147 |
*/ |
| 7148 |
BPF_SOCK_OPS_TSTAMP_SCHED_CB, /* Called when skb is passing |
| 7149 |
* through dev layer when |
| 7150 |
* SK_BPF_CB_TX_TIMESTAMPING |
| 7151 |
* feature is on. |
| 7152 |
*/ |
| 7153 |
BPF_SOCK_OPS_TSTAMP_SND_SW_CB, /* Called when skb is about to send |
| 7154 |
* to the nic when SK_BPF_CB_TX_TIMESTAMPING |
| 7155 |
* feature is on. |
| 7156 |
*/ |
| 7157 |
BPF_SOCK_OPS_TSTAMP_SND_HW_CB, /* Called in hardware phase when |
| 7158 |
* SK_BPF_CB_TX_TIMESTAMPING feature |
| 7159 |
* is on. |
| 7160 |
*/ |
| 7161 |
BPF_SOCK_OPS_TSTAMP_ACK_CB, /* Called when all the skbs in the |
| 7162 |
* same sendmsg call are acked |
| 7163 |
* when SK_BPF_CB_TX_TIMESTAMPING |
| 7164 |
* feature is on. |
| 7165 |
*/ |
| 7166 |
BPF_SOCK_OPS_TSTAMP_SENDMSG_CB, /* Called when every sendmsg syscall |
| 7167 |
* is triggered. It's used to correlate |
| 7168 |
* sendmsg timestamp with corresponding |
| 7169 |
* tskey. |
| 7170 |
*/ |
| 7171 |
}; |
| 7172 |
|
| 7173 |
/* List of TCP states. There is a build check in net/ipv4/tcp.c to detect |
| 7174 |
* changes between the TCP and BPF versions. Ideally this should never happen. |
| 7175 |
* If it does, we need to add code to convert them before calling |
| 7176 |
* the BPF sock_ops function. |
| 7177 |
*/ |
| 7178 |
enum { |
| 7179 |
BPF_TCP_ESTABLISHED = 1, |
| 7180 |
BPF_TCP_SYN_SENT, |
| 7181 |
BPF_TCP_SYN_RECV, |
| 7182 |
BPF_TCP_FIN_WAIT1, |
| 7183 |
BPF_TCP_FIN_WAIT2, |
| 7184 |
BPF_TCP_TIME_WAIT, |
| 7185 |
BPF_TCP_CLOSE, |
| 7186 |
BPF_TCP_CLOSE_WAIT, |
| 7187 |
BPF_TCP_LAST_ACK, |
| 7188 |
BPF_TCP_LISTEN, |
| 7189 |
BPF_TCP_CLOSING, /* Now a valid state */ |
| 7190 |
BPF_TCP_NEW_SYN_RECV, |
| 7191 |
BPF_TCP_BOUND_INACTIVE, |
| 7192 |
|
| 7193 |
BPF_TCP_MAX_STATES /* Leave at the end! */ |
| 7194 |
}; |
| 7195 |
|
| 7196 |
enum { |
| 7197 |
TCP_BPF_IW = 1001, /* Set TCP initial congestion window */ |
| 7198 |
TCP_BPF_SNDCWND_CLAMP = 1002, /* Set sndcwnd_clamp */ |
| 7199 |
TCP_BPF_DELACK_MAX = 1003, /* Max delay ack in usecs */ |
| 7200 |
TCP_BPF_RTO_MIN = 1004, /* Min delay ack in usecs */ |
| 7201 |
/* Copy the SYN pkt to optval |
| 7202 |
* |
| 7203 |
* BPF_PROG_TYPE_SOCK_OPS only. It is similar to the |
| 7204 |
* bpf_getsockopt(TCP_SAVED_SYN) but it does not limit |
| 7205 |
* to only getting from the saved_syn. It can either get the |
| 7206 |
* syn packet from: |
| 7207 |
* |
| 7208 |
* 1. the just-received SYN packet (only available when writing the |
| 7209 |
* SYNACK). It will be useful when it is not necessary to |
| 7210 |
* save the SYN packet for latter use. It is also the only way |
| 7211 |
* to get the SYN during syncookie mode because the syn |
| 7212 |
* packet cannot be saved during syncookie. |
| 7213 |
* |
| 7214 |
* OR |
| 7215 |
* |
| 7216 |
* 2. the earlier saved syn which was done by |
| 7217 |
* bpf_setsockopt(TCP_SAVE_SYN). |
| 7218 |
* |
| 7219 |
* The bpf_getsockopt(TCP_BPF_SYN*) option will hide where the |
| 7220 |
* SYN packet is obtained. |
| 7221 |
* |
| 7222 |
* If the bpf-prog does not need the IP[46] header, the |
| 7223 |
* bpf-prog can avoid parsing the IP header by using |
| 7224 |
* TCP_BPF_SYN. Otherwise, the bpf-prog can get both |
| 7225 |
* IP[46] and TCP header by using TCP_BPF_SYN_IP. |
| 7226 |
* |
| 7227 |
* >0: Total number of bytes copied |
| 7228 |
* -ENOSPC: Not enough space in optval. Only optlen number of |
| 7229 |
* bytes is copied. |
| 7230 |
* -ENOENT: The SYN skb is not available now and the earlier SYN pkt |
| 7231 |
* is not saved by setsockopt(TCP_SAVE_SYN). |
| 7232 |
*/ |
| 7233 |
TCP_BPF_SYN = 1005, /* Copy the TCP header */ |
| 7234 |
TCP_BPF_SYN_IP = 1006, /* Copy the IP[46] and TCP header */ |
| 7235 |
TCP_BPF_SYN_MAC = 1007, /* Copy the MAC, IP[46], and TCP header */ |
| 7236 |
TCP_BPF_SOCK_OPS_CB_FLAGS = 1008, /* Get or Set TCP sock ops flags */ |
| 7237 |
SK_BPF_CB_FLAGS = 1009, /* Get or set sock ops flags in socket */ |
| 7238 |
SK_BPF_BYPASS_PROT_MEM = 1010, /* Get or Set sk->sk_bypass_prot_mem */ |
| 7239 |
|
| 7240 |
}; |
| 7241 |
|
| 7242 |
enum { |
| 7243 |
BPF_LOAD_HDR_OPT_TCP_SYN = (1ULL << 0), |
| 7244 |
}; |
| 7245 |
|
| 7246 |
/* args[0] value during BPF_SOCK_OPS_HDR_OPT_LEN_CB and |
| 7247 |
* BPF_SOCK_OPS_WRITE_HDR_OPT_CB. |
| 7248 |
*/ |
| 7249 |
enum { |
| 7250 |
BPF_WRITE_HDR_TCP_CURRENT_MSS = 1, /* Kernel is finding the |
| 7251 |
* total option spaces |
| 7252 |
* required for an established |
| 7253 |
* sk in order to calculate the |
| 7254 |
* MSS. No skb is actually |
| 7255 |
* sent. |
| 7256 |
*/ |
| 7257 |
BPF_WRITE_HDR_TCP_SYNACK_COOKIE = 2, /* Kernel is in syncookie mode |
| 7258 |
* when sending a SYN. |
| 7259 |
*/ |
| 7260 |
}; |
| 7261 |
|
| 7262 |
struct bpf_perf_event_value { |
| 7263 |
__u64 counter; |
| 7264 |
__u64 enabled; |
| 7265 |
__u64 running; |
| 7266 |
}; |
| 7267 |
|
| 7268 |
enum { |
| 7269 |
BPF_DEVCG_ACC_MKNOD = (1ULL << 0), |
| 7270 |
BPF_DEVCG_ACC_READ = (1ULL << 1), |
| 7271 |
BPF_DEVCG_ACC_WRITE = (1ULL << 2), |
| 7272 |
}; |
| 7273 |
|
| 7274 |
enum { |
| 7275 |
BPF_DEVCG_DEV_BLOCK = (1ULL << 0), |
| 7276 |
BPF_DEVCG_DEV_CHAR = (1ULL << 1), |
| 7277 |
}; |
| 7278 |
|
| 7279 |
struct bpf_cgroup_dev_ctx { |
| 7280 |
/* access_type encoded as (BPF_DEVCG_ACC_* << 16) | BPF_DEVCG_DEV_* */ |
| 7281 |
__u32 access_type; |
| 7282 |
__u32 major; |
| 7283 |
__u32 minor; |
| 7284 |
}; |
| 7285 |
|
| 7286 |
struct bpf_raw_tracepoint_args { |
| 7287 |
__u64 args[0]; |
| 7288 |
}; |
| 7289 |
|
| 7290 |
/* DIRECT: Skip the FIB rules and go to FIB table associated with device |
| 7291 |
* OUTPUT: Do lookup from egress perspective; default is ingress |
| 7292 |
*/ |
| 7293 |
enum { |
| 7294 |
BPF_FIB_LOOKUP_DIRECT = (1U << 0), |
| 7295 |
BPF_FIB_LOOKUP_OUTPUT = (1U << 1), |
| 7296 |
BPF_FIB_LOOKUP_SKIP_NEIGH = (1U << 2), |
| 7297 |
BPF_FIB_LOOKUP_TBID = (1U << 3), |
| 7298 |
BPF_FIB_LOOKUP_SRC = (1U << 4), |
| 7299 |
BPF_FIB_LOOKUP_MARK = (1U << 5), |
| 7300 |
}; |
| 7301 |
|
| 7302 |
enum { |
| 7303 |
BPF_FIB_LKUP_RET_SUCCESS, /* lookup successful */ |
| 7304 |
BPF_FIB_LKUP_RET_BLACKHOLE, /* dest is blackholed; can be dropped */ |
| 7305 |
BPF_FIB_LKUP_RET_UNREACHABLE, /* dest is unreachable; can be dropped */ |
| 7306 |
BPF_FIB_LKUP_RET_PROHIBIT, /* dest not allowed; can be dropped */ |
| 7307 |
BPF_FIB_LKUP_RET_NOT_FWDED, /* packet is not forwarded */ |
| 7308 |
BPF_FIB_LKUP_RET_FWD_DISABLED, /* fwding is not enabled on ingress */ |
| 7309 |
BPF_FIB_LKUP_RET_UNSUPP_LWT, /* fwd requires encapsulation */ |
| 7310 |
BPF_FIB_LKUP_RET_NO_NEIGH, /* no neighbor entry for nh */ |
| 7311 |
BPF_FIB_LKUP_RET_FRAG_NEEDED, /* fragmentation required to fwd */ |
| 7312 |
BPF_FIB_LKUP_RET_NO_SRC_ADDR, /* failed to derive IP src addr */ |
| 7313 |
}; |
| 7314 |
|
| 7315 |
struct bpf_fib_lookup { |
| 7316 |
/* input: network family for lookup (AF_INET, AF_INET6) |
| 7317 |
* output: network family of egress nexthop |
| 7318 |
*/ |
| 7319 |
__u8 family; |
| 7320 |
|
| 7321 |
/* set if lookup is to consider L4 data - e.g., FIB rules */ |
| 7322 |
__u8 l4_protocol; |
| 7323 |
__be16 sport; |
| 7324 |
__be16 dport; |
| 7325 |
|
| 7326 |
union { /* used for MTU check */ |
| 7327 |
/* input to lookup */ |
| 7328 |
__u16 tot_len; /* L3 length from network hdr (iph->tot_len) */ |
| 7329 |
|
| 7330 |
/* output: MTU value */ |
| 7331 |
__u16 mtu_result; |
| 7332 |
} __attribute__((packed, aligned(2))); |
| 7333 |
/* input: L3 device index for lookup |
| 7334 |
* output: device index from FIB lookup |
| 7335 |
*/ |
| 7336 |
__u32 ifindex; |
| 7337 |
|
| 7338 |
union { |
| 7339 |
/* inputs to lookup */ |
| 7340 |
__u8 tos; /* AF_INET */ |
| 7341 |
__be32 flowinfo; /* AF_INET6, flow_label + priority */ |
| 7342 |
|
| 7343 |
/* output: metric of fib result (IPv4/IPv6 only) */ |
| 7344 |
__u32 rt_metric; |
| 7345 |
}; |
| 7346 |
|
| 7347 |
/* input: source address to consider for lookup |
| 7348 |
* output: source address result from lookup |
| 7349 |
*/ |
| 7350 |
union { |
| 7351 |
__be32 ipv4_src; |
| 7352 |
__u32 ipv6_src[4]; /* in6_addr; network order */ |
| 7353 |
}; |
| 7354 |
|
| 7355 |
/* input to bpf_fib_lookup, ipv{4,6}_dst is destination address in |
| 7356 |
* network header. output: bpf_fib_lookup sets to gateway address |
| 7357 |
* if FIB lookup returns gateway route |
| 7358 |
*/ |
| 7359 |
union { |
| 7360 |
__be32 ipv4_dst; |
| 7361 |
__u32 ipv6_dst[4]; /* in6_addr; network order */ |
| 7362 |
}; |
| 7363 |
|
| 7364 |
union { |
| 7365 |
struct { |
| 7366 |
/* output */ |
| 7367 |
__be16 h_vlan_proto; |
| 7368 |
__be16 h_vlan_TCI; |
| 7369 |
}; |
| 7370 |
/* input: when accompanied with the |
| 7371 |
* 'BPF_FIB_LOOKUP_DIRECT | BPF_FIB_LOOKUP_TBID` flags, a |
| 7372 |
* specific routing table to use for the fib lookup. |
| 7373 |
*/ |
| 7374 |
__u32 tbid; |
| 7375 |
}; |
| 7376 |
|
| 7377 |
union { |
| 7378 |
/* input */ |
| 7379 |
struct { |
| 7380 |
__u32 mark; /* policy routing */ |
| 7381 |
/* 2 4-byte holes for input */ |
| 7382 |
}; |
| 7383 |
|
| 7384 |
/* output: source and dest mac */ |
| 7385 |
struct { |
| 7386 |
__u8 smac[6]; /* ETH_ALEN */ |
| 7387 |
__u8 dmac[6]; /* ETH_ALEN */ |
| 7388 |
}; |
| 7389 |
}; |
| 7390 |
}; |
| 7391 |
|
| 7392 |
struct bpf_redir_neigh { |
| 7393 |
/* network family for lookup (AF_INET, AF_INET6) */ |
| 7394 |
__u32 nh_family; |
| 7395 |
/* network address of nexthop; skips fib lookup to find gateway */ |
| 7396 |
union { |
| 7397 |
__be32 ipv4_nh; |
| 7398 |
__u32 ipv6_nh[4]; /* in6_addr; network order */ |
| 7399 |
}; |
| 7400 |
}; |
| 7401 |
|
| 7402 |
/* bpf_check_mtu flags*/ |
| 7403 |
enum bpf_check_mtu_flags { |
| 7404 |
BPF_MTU_CHK_SEGS = (1U << 0), |
| 7405 |
}; |
| 7406 |
|
| 7407 |
enum bpf_check_mtu_ret { |
| 7408 |
BPF_MTU_CHK_RET_SUCCESS, /* check and lookup successful */ |
| 7409 |
BPF_MTU_CHK_RET_FRAG_NEEDED, /* fragmentation required to fwd */ |
| 7410 |
BPF_MTU_CHK_RET_SEGS_TOOBIG, /* GSO re-segmentation needed to fwd */ |
| 7411 |
}; |
| 7412 |
|
| 7413 |
enum bpf_task_fd_type { |
| 7414 |
BPF_FD_TYPE_RAW_TRACEPOINT, /* tp name */ |
| 7415 |
BPF_FD_TYPE_TRACEPOINT, /* tp name */ |
| 7416 |
BPF_FD_TYPE_KPROBE, /* (symbol + offset) or addr */ |
| 7417 |
BPF_FD_TYPE_KRETPROBE, /* (symbol + offset) or addr */ |
| 7418 |
BPF_FD_TYPE_UPROBE, /* filename + offset */ |
| 7419 |
BPF_FD_TYPE_URETPROBE, /* filename + offset */ |
| 7420 |
}; |
| 7421 |
|
| 7422 |
enum { |
| 7423 |
BPF_FLOW_DISSECTOR_F_PARSE_1ST_FRAG = (1U << 0), |
| 7424 |
BPF_FLOW_DISSECTOR_F_STOP_AT_FLOW_LABEL = (1U << 1), |
| 7425 |
BPF_FLOW_DISSECTOR_F_STOP_AT_ENCAP = (1U << 2), |
| 7426 |
}; |
| 7427 |
|
| 7428 |
struct bpf_flow_keys { |
| 7429 |
__u16 nhoff; |
| 7430 |
__u16 thoff; |
| 7431 |
__u16 addr_proto; /* ETH_P_* of valid addrs */ |
| 7432 |
__u8 is_frag; |
| 7433 |
__u8 is_first_frag; |
| 7434 |
__u8 is_encap; |
| 7435 |
__u8 ip_proto; |
| 7436 |
__be16 n_proto; |
| 7437 |
__be16 sport; |
| 7438 |
__be16 dport; |
| 7439 |
union { |
| 7440 |
struct { |
| 7441 |
__be32 ipv4_src; |
| 7442 |
__be32 ipv4_dst; |
| 7443 |
}; |
| 7444 |
struct { |
| 7445 |
__u32 ipv6_src[4]; /* in6_addr; network order */ |
| 7446 |
__u32 ipv6_dst[4]; /* in6_addr; network order */ |
| 7447 |
}; |
| 7448 |
}; |
| 7449 |
__u32 flags; |
| 7450 |
__be32 flow_label; |
| 7451 |
}; |
| 7452 |
|
| 7453 |
struct bpf_func_info { |
| 7454 |
__u32 insn_off; |
| 7455 |
__u32 type_id; |
| 7456 |
}; |
| 7457 |
|
| 7458 |
#define BPF_LINE_INFO_LINE_NUM(line_col) ((line_col) >> 10) |
| 7459 |
#define BPF_LINE_INFO_LINE_COL(line_col) ((line_col) & 0x3ff) |
| 7460 |
|
| 7461 |
struct bpf_line_info { |
| 7462 |
__u32 insn_off; |
| 7463 |
__u32 file_name_off; |
| 7464 |
__u32 line_off; |
| 7465 |
__u32 line_col; |
| 7466 |
}; |
| 7467 |
|
| 7468 |
struct bpf_spin_lock { |
| 7469 |
__u32 val; |
| 7470 |
}; |
| 7471 |
|
| 7472 |
struct bpf_timer { |
| 7473 |
__u64 __opaque[2]; |
| 7474 |
} __attribute__((aligned(8))); |
| 7475 |
|
| 7476 |
struct bpf_task_work { |
| 7477 |
__u64 __opaque; |
| 7478 |
} __attribute__((aligned(8))); |
| 7479 |
|
| 7480 |
struct bpf_wq { |
| 7481 |
__u64 __opaque[2]; |
| 7482 |
} __attribute__((aligned(8))); |
| 7483 |
|
| 7484 |
struct bpf_dynptr { |
| 7485 |
__u64 __opaque[2]; |
| 7486 |
} __attribute__((aligned(8))); |
| 7487 |
|
| 7488 |
struct bpf_list_head { |
| 7489 |
__u64 __opaque[2]; |
| 7490 |
} __attribute__((aligned(8))); |
| 7491 |
|
| 7492 |
struct bpf_list_node { |
| 7493 |
__u64 __opaque[3]; |
| 7494 |
} __attribute__((aligned(8))); |
| 7495 |
|
| 7496 |
struct bpf_rb_root { |
| 7497 |
__u64 __opaque[2]; |
| 7498 |
} __attribute__((aligned(8))); |
| 7499 |
|
| 7500 |
struct bpf_rb_node { |
| 7501 |
__u64 __opaque[4]; |
| 7502 |
} __attribute__((aligned(8))); |
| 7503 |
|
| 7504 |
struct bpf_refcount { |
| 7505 |
__u32 __opaque[1]; |
| 7506 |
} __attribute__((aligned(4))); |
| 7507 |
|
| 7508 |
struct bpf_sysctl { |
| 7509 |
__u32 write; /* Sysctl is being read (= 0) or written (= 1). |
| 7510 |
* Allows 1,2,4-byte read, but no write. |
| 7511 |
*/ |
| 7512 |
__u32 file_pos; /* Sysctl file position to read from, write to. |
| 7513 |
* Allows 1,2,4-byte read an 4-byte write. |
| 7514 |
*/ |
| 7515 |
}; |
| 7516 |
|
| 7517 |
struct bpf_sockopt { |
| 7518 |
__bpf_md_ptr(struct bpf_sock *, sk); |
| 7519 |
__bpf_md_ptr(void *, optval); |
| 7520 |
__bpf_md_ptr(void *, optval_end); |
| 7521 |
|
| 7522 |
__s32 level; |
| 7523 |
__s32 optname; |
| 7524 |
__s32 optlen; |
| 7525 |
__s32 retval; |
| 7526 |
}; |
| 7527 |
|
| 7528 |
struct bpf_pidns_info { |
| 7529 |
__u32 pid; |
| 7530 |
__u32 tgid; |
| 7531 |
}; |
| 7532 |
|
| 7533 |
/* User accessible data for SK_LOOKUP programs. Add new fields at the end. */ |
| 7534 |
struct bpf_sk_lookup { |
| 7535 |
union { |
| 7536 |
__bpf_md_ptr(struct bpf_sock *, sk); /* Selected socket */ |
| 7537 |
__u64 cookie; /* Non-zero if socket was selected in PROG_TEST_RUN */ |
| 7538 |
}; |
| 7539 |
|
| 7540 |
__u32 family; /* Protocol family (AF_INET, AF_INET6) */ |
| 7541 |
__u32 protocol; /* IP protocol (IPPROTO_TCP, IPPROTO_UDP) */ |
| 7542 |
__u32 remote_ip4; /* Network byte order */ |
| 7543 |
__u32 remote_ip6[4]; /* Network byte order */ |
| 7544 |
__be16 remote_port; /* Network byte order */ |
| 7545 |
__u16 :16; /* Zero padding */ |
| 7546 |
__u32 local_ip4; /* Network byte order */ |
| 7547 |
__u32 local_ip6[4]; /* Network byte order */ |
| 7548 |
__u32 local_port; /* Host byte order */ |
| 7549 |
__u32 ingress_ifindex; /* The arriving interface. Determined by inet_iif. */ |
| 7550 |
}; |
| 7551 |
|
| 7552 |
/* |
| 7553 |
* struct btf_ptr is used for typed pointer representation; the |
| 7554 |
* type id is used to render the pointer data as the appropriate type |
| 7555 |
* via the bpf_snprintf_btf() helper described above. A flags field - |
| 7556 |
* potentially to specify additional details about the BTF pointer |
| 7557 |
* (rather than its mode of display) - is included for future use. |
| 7558 |
* Display flags - BTF_F_* - are passed to bpf_snprintf_btf separately. |
| 7559 |
*/ |
| 7560 |
struct btf_ptr { |
| 7561 |
void *ptr; |
| 7562 |
__u32 type_id; |
| 7563 |
__u32 flags; /* BTF ptr flags; unused at present. */ |
| 7564 |
}; |
| 7565 |
|
| 7566 |
/* |
| 7567 |
* Flags to control bpf_snprintf_btf() behaviour. |
| 7568 |
* - BTF_F_COMPACT: no formatting around type information |
| 7569 |
* - BTF_F_NONAME: no struct/union member names/types |
| 7570 |
* - BTF_F_PTR_RAW: show raw (unobfuscated) pointer values; |
| 7571 |
* equivalent to %px. |
| 7572 |
* - BTF_F_ZERO: show zero-valued struct/union members; they |
| 7573 |
* are not displayed by default |
| 7574 |
*/ |
| 7575 |
enum { |
| 7576 |
BTF_F_COMPACT = (1ULL << 0), |
| 7577 |
BTF_F_NONAME = (1ULL << 1), |
| 7578 |
BTF_F_PTR_RAW = (1ULL << 2), |
| 7579 |
BTF_F_ZERO = (1ULL << 3), |
| 7580 |
}; |
| 7581 |
|
| 7582 |
/* bpf_core_relo_kind encodes which aspect of captured field/type/enum value |
| 7583 |
* has to be adjusted by relocations. It is emitted by llvm and passed to |
| 7584 |
* libbpf and later to the kernel. |
| 7585 |
*/ |
| 7586 |
enum bpf_core_relo_kind { |
| 7587 |
BPF_CORE_FIELD_BYTE_OFFSET = 0, /* field byte offset */ |
| 7588 |
BPF_CORE_FIELD_BYTE_SIZE = 1, /* field size in bytes */ |
| 7589 |
BPF_CORE_FIELD_EXISTS = 2, /* field existence in target kernel */ |
| 7590 |
BPF_CORE_FIELD_SIGNED = 3, /* field signedness (0 - unsigned, 1 - signed) */ |
| 7591 |
BPF_CORE_FIELD_LSHIFT_U64 = 4, /* bitfield-specific left bitshift */ |
| 7592 |
BPF_CORE_FIELD_RSHIFT_U64 = 5, /* bitfield-specific right bitshift */ |
| 7593 |
BPF_CORE_TYPE_ID_LOCAL = 6, /* type ID in local BPF object */ |
| 7594 |
BPF_CORE_TYPE_ID_TARGET = 7, /* type ID in target kernel */ |
| 7595 |
BPF_CORE_TYPE_EXISTS = 8, /* type existence in target kernel */ |
| 7596 |
BPF_CORE_TYPE_SIZE = 9, /* type size in bytes */ |
| 7597 |
BPF_CORE_ENUMVAL_EXISTS = 10, /* enum value existence in target kernel */ |
| 7598 |
BPF_CORE_ENUMVAL_VALUE = 11, /* enum value integer value */ |
| 7599 |
BPF_CORE_TYPE_MATCHES = 12, /* type match in target kernel */ |
| 7600 |
}; |
| 7601 |
|
| 7602 |
/* |
| 7603 |
* "struct bpf_core_relo" is used to pass relocation data form LLVM to libbpf |
| 7604 |
* and from libbpf to the kernel. |
| 7605 |
* |
| 7606 |
* CO-RE relocation captures the following data: |
| 7607 |
* - insn_off - instruction offset (in bytes) within a BPF program that needs |
| 7608 |
* its insn->imm field to be relocated with actual field info; |
| 7609 |
* - type_id - BTF type ID of the "root" (containing) entity of a relocatable |
| 7610 |
* type or field; |
| 7611 |
* - access_str_off - offset into corresponding .BTF string section. String |
| 7612 |
* interpretation depends on specific relocation kind: |
| 7613 |
* - for field-based relocations, string encodes an accessed field using |
| 7614 |
* a sequence of field and array indices, separated by colon (:). It's |
| 7615 |
* conceptually very close to LLVM's getelementptr ([0]) instruction's |
| 7616 |
* arguments for identifying offset to a field. |
| 7617 |
* - for type-based relocations, strings is expected to be just "0"; |
| 7618 |
* - for enum value-based relocations, string contains an index of enum |
| 7619 |
* value within its enum type; |
| 7620 |
* - kind - one of enum bpf_core_relo_kind; |
| 7621 |
* |
| 7622 |
* Example: |
| 7623 |
* struct sample { |
| 7624 |
* int a; |
| 7625 |
* struct { |
| 7626 |
* int b[10]; |
| 7627 |
* }; |
| 7628 |
* }; |
| 7629 |
* |
| 7630 |
* struct sample *s = ...; |
| 7631 |
* int *x = &s->a; // encoded as "0:0" (a is field #0) |
| 7632 |
* int *y = &s->b[5]; // encoded as "0:1:0:5" (anon struct is field #1, |
| 7633 |
* // b is field #0 inside anon struct, accessing elem #5) |
| 7634 |
* int *z = &s[10]->b; // encoded as "10:1" (ptr is used as an array) |
| 7635 |
* |
| 7636 |
* type_id for all relocs in this example will capture BTF type id of |
| 7637 |
* `struct sample`. |
| 7638 |
* |
| 7639 |
* Such relocation is emitted when using __builtin_preserve_access_index() |
| 7640 |
* Clang built-in, passing expression that captures field address, e.g.: |
| 7641 |
* |
| 7642 |
* bpf_probe_read(&dst, sizeof(dst), |
| 7643 |
* __builtin_preserve_access_index(&src->a.b.c)); |
| 7644 |
* |
| 7645 |
* In this case Clang will emit field relocation recording necessary data to |
| 7646 |
* be able to find offset of embedded `a.b.c` field within `src` struct. |
| 7647 |
* |
| 7648 |
* [0] https://llvm.org/docs/LangRef.html#getelementptr-instruction |
| 7649 |
*/ |
| 7650 |
struct bpf_core_relo { |
| 7651 |
__u32 insn_off; |
| 7652 |
__u32 type_id; |
| 7653 |
__u32 access_str_off; |
| 7654 |
enum bpf_core_relo_kind kind; |
| 7655 |
}; |
| 7656 |
|
| 7657 |
/* |
| 7658 |
* Flags to control bpf_timer_start() behaviour. |
| 7659 |
* - BPF_F_TIMER_ABS: Timeout passed is absolute time, by default it is |
| 7660 |
* relative to current time. |
| 7661 |
* - BPF_F_TIMER_CPU_PIN: Timer will be pinned to the CPU of the caller. |
| 7662 |
*/ |
| 7663 |
enum { |
| 7664 |
BPF_F_TIMER_ABS = (1ULL << 0), |
| 7665 |
BPF_F_TIMER_CPU_PIN = (1ULL << 1), |
| 7666 |
}; |
| 7667 |
|
| 7668 |
/* BPF numbers iterator state */ |
| 7669 |
struct bpf_iter_num { |
| 7670 |
/* opaque iterator state; having __u64 here allows to preserve correct |
| 7671 |
* alignment requirements in vmlinux.h, generated from BTF |
| 7672 |
*/ |
| 7673 |
__u64 __opaque[1]; |
| 7674 |
} __attribute__((aligned(8))); |
| 7675 |
|
| 7676 |
/* |
| 7677 |
* Flags to control BPF kfunc behaviour. |
| 7678 |
* - BPF_F_PAD_ZEROS: Pad destination buffer with zeros. (See the respective |
| 7679 |
* helper documentation for details.) |
| 7680 |
*/ |
| 7681 |
enum bpf_kfunc_flags { |
| 7682 |
BPF_F_PAD_ZEROS = (1ULL << 0), |
| 7683 |
}; |
| 7684 |
|
| 7685 |
/* |
| 7686 |
* Values of a BPF_MAP_TYPE_INSN_ARRAY entry must be of this type. |
| 7687 |
* |
| 7688 |
* Before the map is used the orig_off field should point to an |
| 7689 |
* instruction inside the program being loaded. The other fields |
| 7690 |
* must be set to 0. |
| 7691 |
* |
| 7692 |
* After the program is loaded, the xlated_off will be adjusted |
| 7693 |
* by the verifier to point to the index of the original instruction |
| 7694 |
* in the xlated program. If the instruction is deleted, it will |
| 7695 |
* be set to (u32)-1. The jitted_off will be set to the corresponding |
| 7696 |
* offset in the jitted image of the program. |
| 7697 |
*/ |
| 7698 |
struct bpf_insn_array_value { |
| 7699 |
__u32 orig_off; |
| 7700 |
__u32 xlated_off; |
| 7701 |
__u32 jitted_off; |
| 7702 |
__u32 :32; |
| 7703 |
}; |
| 7704 |
|
| 7705 |
#endif /* __LINUX_BPF_H__ */ |