| 1 |
Changes in libmpg123 libtool interface versions. Next to the version |
| 2 |
the mpg123 release where its changes first appeared to the public |
| 3 |
is given. |
| 4 |
|
| 5 |
49.0.49 (mpg123 1.33) |
| 6 |
- Added mpg123_open_handle64() as clearly portable match for |
| 7 |
mpg123_reader64(). It is just mpg123_open_handle() without |
| 8 |
code path for non-portable API. |
| 9 |
- Remove mpg123_open_handle() and renamed variants from builds |
| 10 |
with MPG123_PORTABLE_API. Code must switch to |
| 11 |
mpg123_open_handle64() there if MPG123_API_VERSION >= 49! |
| 12 |
- Added mpg123_open64() and mpg123_open_fixed64() as portable |
| 13 |
variants of mpg123_open() and mpg123_open_fixed(). |
| 14 |
|
| 15 |
48.0.48 (mpg123 1.32) |
| 16 |
- Added mpg123_distversion() and mpg123_libversion(). |
| 17 |
- Added mpg123_reader64() and the other int64_t-based functions: |
| 18 |
mpg123_framebyframe_decode64(), mpg123_framepos64(), mpg123_tell64(), |
| 19 |
mpg123_tellframe64(), mpg123_tell_stream64(), mpg123_seek64(), |
| 20 |
mpg123_feedseek64(), mpg123_seek_frame64(), mpg123_timeframe64(), |
| 21 |
mpg123_index64(), mpg123_set_index64(), mpg123_framelength64(), |
| 22 |
mpg123_length64(), and mpg123_set_filesize64(). |
| 23 |
- Added MPG123_PORTABLE_API to hide non-portable API (off_t, ssize_t) |
| 24 |
from mpg123.h. |
| 25 |
- Made mpg123_seek() family ignore sign with SEEK_END offsets, always |
| 26 |
putting a negative one on it to allow usage consistent with lseek(). |
| 27 |
|
| 28 |
47.0.47 (mpg123 1.30) |
| 29 |
- Added mpg123_eq_bands(), mpg123_eq_change() and mpg123_volume_change_db(). |
| 30 |
|
| 31 |
46.0.46 (mpg123 1.27) |
| 32 |
- Functions mpg123_init() and mpg123_exit() are really no-ops now. |
| 33 |
There is no need to call them, and no harm done calling them in |
| 34 |
parallel. The latter used to be the case before, too, but only in |
| 35 |
practice, not in theory. |
| 36 |
- Common tables provided in precomputed form now, both float and fixed. |
| 37 |
- There are enum-less variants of all API entry points now, mapped to |
| 38 |
by default unless MPG123_ENUM_API is defined. |
| 39 |
|
| 40 |
45.0.45 (mpg123 1.26) |
| 41 |
- mpg123_read(), mpg123_decode(), and mpg123_replace_buffer() now taking |
| 42 |
void* for output buffers |
| 43 |
- value 0 for any rate in mpg123_format()/mpg123_fmt() |
| 44 |
- use of mpg123_decoder() after track open supported |
| 45 |
(also as hack to trigger renegotiation of output format, |
| 46 |
which will not be communicated as it only happens by users's |
| 47 |
intention) |
| 48 |
- added struct mpg123_moreinfo and mpg123_set_moreinfo() |
| 49 |
- officially declared mpg123_exit() as superfluous |
| 50 |
- added MPG123_ENC_DELAY, MPG123_ENC_PADDING, MPG123_DEC_DELAY |
| 51 |
- added MPG123_STORE_RAW_ID3 and mpg123_id3_raw() |
| 52 |
- added mpg123_new_string() and mpg123_delete_string() |
| 53 |
- added MPG123_FORCE_ENDIAN and MPG123_BIG_ENDIAN |
| 54 |
- added MPG123_NO_READAHEAD and MPG123_FREEFORMAT_SIZE |
| 55 |
- changed format logic to search all possible encodings |
| 56 |
and channel counts for a rate first, then trying different |
| 57 |
rates (rate > channel > encoding) |
| 58 |
- included float and >16 bit integer encodings in default |
| 59 |
format search |
| 60 |
- added MPG123_FLOAT_FALLBACK |
| 61 |
- added MPG123_NO_FRANKENSTEIN |
| 62 |
- added mpg123_feature2(), added MPG123_FEATURE_OUTPUT_FLOAT32 and |
| 63 |
MPG123_FEATURE_OUTPUT_FLOAT32 |
| 64 |
- added mpg123_open_fixed() |
| 65 |
|
| 66 |
44.0.44 (mpg123 1.25) |
| 67 |
- added mpg123_getformat2() |
| 68 |
|
| 69 |
43.0.43 (mpg123 1.24) |
| 70 |
- added MPG123_NO_PEEK_END and MPG123_FORCE_SEEKABLE |
| 71 |
|
| 72 |
42.0.42 (mpg123 1.23) |
| 73 |
- added mpg123_framelength() |
| 74 |
Now mpg123_position() is truly obsolete! |
| 75 |
- hardened string API to not crash if given NULL pointers |
| 76 |
(except mpg123_init_string()) |
| 77 |
- equalizer feature optional |
| 78 |
|
| 79 |
41.0.41 (mpg123 1.22) |
| 80 |
- Add checks for NULL handles in some API functions that missed that, changed return value in others to MPG123_BAD_HANDLE where appropriate: |
| 81 |
- mpg123_format_none(NULL) == MPG123_BAD_HANDLE (was: MPG123_ERR) |
| 82 |
- mpg123_format_all(NULL) == MPG123_BAD_HANDLE (was: MPG123_ERR) |
| 83 |
- mpg123_format(NULL, ...) == MPG123_BAD_HANDLE (was: MPG123_ERR) |
| 84 |
- mpg123_reset_eq(NULL) == MPG123_BAD_HANDLE (was: undefined) |
| 85 |
- mpg123_replace_buffer(NULL, ...) == MPG123_BAD_HANDLE (was: undefined) |
| 86 |
- mpg123_framedata(NULL, ...) == MPG123_BAD_HANDLE (was: MPG123_ERR) |
| 87 |
- mpg123_decoder(NULL, ...) == MPG123_BAD_HANDLE (was: MPG123_ERR) |
| 88 |
- mpg123_param(NULL, ...) == MPG123_BAD_HANDLE (was: MPG123_ERR) |
| 89 |
- mpg123_getparam(NULL, ...) == MPG123_BAD_HANDLE (was: MPG123_ERR) |
| 90 |
- mpg123_getstate(NULL, ...) == MPG123_BAD_HANDLE (was: MPG123_ERR) |
| 91 |
- mpg123_eq(NULL, ...) == MPG123_BAD_HANDLE (was: MPG123_ERR) |
| 92 |
- mpg123_open(NULL, ...) == MPG123_BAD_HANDLE (was: MPG123_ERR) |
| 93 |
- mpg123_open_handle(NULL, ...) == MPG123_BAD_HANDLE (was: MPG123_ERR) |
| 94 |
- mpg123_open_feed(NULL, ...) == MPG123_BAD_HANDLE (was: MPG123_ERR) |
| 95 |
- mpg123_replace_reader(NULL, ...) == MPG123_BAD_HANDLE (was: MPG123_ERR) |
| 96 |
- mpg123_replace_reader_handle(NULL, ...) == MPG123_BAD_HANDLE (was: MPG123_ERR) |
| 97 |
- mpg123_decode_frame(NULL, ...) == MPG123_BAD_HANDLE (was: MPG123_ERR) |
| 98 |
- mpg123_feed(NULL, ...) == MPG123_BAD_HANDLE (was: MPG123_ERR) |
| 99 |
- mpg123_decode(NULL, ...) == MPG123_BAD_HANDLE (was: MPG123_ERR) |
| 100 |
- mpg123_info(NULL, ...) == MPG123_BAD_HANDLE (was: MPG123_ERR) |
| 101 |
- mpg123_getformat(NULL, ...) == MPG123_BAD_HANDLE (was: MPG123_ERR) |
| 102 |
- mpg123_set_filesize(NULL, ...) == MPG123_BAD_HANDLE (was: MPG123_ERR) |
| 103 |
- mpg123_scan(NULL) == MPG123_BAD_HANDLE (was: MPG123_ERR) |
| 104 |
- mpg123_id3(NULL, ...) == MPG123_BAD_HANDLE (was: MPG123_ERR) |
| 105 |
- mpg123_icy(NULL, ...) == MPG123_BAD_HANDLE (was: MPG123_ERR) |
| 106 |
- mpg123_index(NULL, ...) == MPG123_BAD_HANDLE (was: MPG123_ERR) |
| 107 |
- mpg123_set_index(NULL, ...) == MPG123_BAD_HANDLE (was: MPG123_ERR) |
| 108 |
- mpg123_close(NULL, ...) == MPG123_BAD_HANDLE (was: MPG123_ERR) |
| 109 |
- Changed return value of mpg123_geteq() to 0 for NULL handle to be consistent with itself. |
| 110 |
|
| 111 |
|
| 112 |
40.0.40 (mpg123 1.19) |
| 113 |
- Bump for marking the first actual implementation of A-Law encoding. |
| 114 |
Not that it matters to anyone, though --- I wonder why not even the |
| 115 |
Asterisk users wanted this. It's for telephony, dammit! |
| 116 |
- Added arm_fpu decoder for runtime switch between NEON and generic fpu. |
| 117 |
|
| 118 |
39.2.39 (mpg123 1.19) |
| 119 |
- Added more elaborate post-processing to enable 32 and 24 bit output also with low-precision decoder (16 bit, fixed-point). |
| 120 |
|
| 121 |
39.0.39 (mpg123 1.18) |
| 122 |
- Added MPG123_FRESH_DECODER. |
| 123 |
- Also containing several regression fixes. |
| 124 |
|
| 125 |
38.0.38 (mpg123 1.16) |
| 126 |
- Added MPG123_PICTURE and associated addition to mpg123_id3v2 struct. |
| 127 |
|
| 128 |
37.0.37 (mpg123 1.16) |
| 129 |
- Added mpg123_chomp_string. |
| 130 |
|
| 131 |
36.0.36 (mpg123 1.14) |
| 132 |
- Extended MPG123_RESYNC_LIMIT to initial header search. |
| 133 |
- Not cutting decoder delay unconditionally anymore (only in combination with known encoder delay / padding). |
| 134 |
|
| 135 |
35.0.35 (mpg123 1.14) |
| 136 |
- Added mpg123_meta_free(). |
| 137 |
|
| 138 |
34.0.34 (mpg123 1.14) |
| 139 |
- Added flag MPG123_AUTO_RESAMPLE. |
| 140 |
- Changed (improved;-) outbuffer behaviour. |
| 141 |
|
| 142 |
33.0.33 (mpg123 1.14) |
| 143 |
- Added MPG123_BUFFERFILL. |
| 144 |
|
| 145 |
32.0.32 (mpg123 1.14) |
| 146 |
- Added mpg123_framepos() |
| 147 |
|
| 148 |
31.0.31 (mpg123 1.14) |
| 149 |
- Added mpg123_framedata() and MPG123_IGNORE_INFOFRAME. |
| 150 |
|
| 151 |
30.0.30 (mpg123 1.14) |
| 152 |
- Added MPG123_FEEDPOOL and MPG123_FEEDBUFFER. |
| 153 |
|
| 154 |
29.0.29 (mpg123 1.13) |
| 155 |
- New decoder: ARM neon. |
| 156 |
- Added support for 24 bit output (dumb byte-chopping of 32 bit output). |
| 157 |
|
| 158 |
28.0.28 (mpg123 1.13) |
| 159 |
- Add mpg123_strlen(). |
| 160 |
|
| 161 |
27.0.27 (mpg123 1.13) |
| 162 |
- Implictly disable seeking on streams when client enforced ICY parsing. |
| 163 |
This helps debugging dumps of http streams. |
| 164 |
|
| 165 |
26.0.26 (mpg123 1.13) |
| 166 |
- Added mpg123_encsize(). |
| 167 |
- Added flag MPG123_SKIP_ID3V2. |
| 168 |
|
| 169 |
25.0.25 (mpg123 1.12) |
| 170 |
- Version increase to mark the point where the split between normal and large-file-enabled library vanishes again. The world did not like it. |
| 171 |
Now Thomas lost some days of recreation and sleep to give it a dual-mode libmpg123 on large-file-sensitive systems. |
| 172 |
|
| 173 |
24.0.24 (mpg123 1.12) |
| 174 |
- Introduce mpg123_replace_reader_handle() and mpg123_open_handle() |
| 175 |
... this is also in preparation for the next version which will drop the separated large-file library again, due to public display of dismay. |
| 176 |
- Add the experimental mpg123_framebyframe_decode to the off_t-sensitive functions. |
| 177 |
|
| 178 |
23.0.23 (mpg123 1.11) |
| 179 |
- Version increase to mark the point where the explicit split between normal and large-file-enabled library has been introduced. |
| 180 |
|
| 181 |
22.0.22 (mpg123 1.10) |
| 182 |
- Experimental framebyframe API added. |
| 183 |
|
| 184 |
21.0.21 (mpg123 1.10) |
| 185 |
- Added support of unicode file names under windows via UTF-8 argument to mpg123_open. |
| 186 |
- Added mpg123_feature(), for example to test for the above behaviour. |
| 187 |
|
| 188 |
20.0.20 (mpg123 1.9) |
| 189 |
- New flag: MPG123_PLAIN_ID3TEXT |
| 190 |
- Corresponding text encoding handling API added: |
| 191 |
mpg123_enc_from_id3, mpg123_store_utf8 |
| 192 |
|
| 193 |
19.0.19 (mpg123 1.9) |
| 194 |
- Hm, what was it exactly now... there are candidates: |
| 195 |
- runtime dithering |
| 196 |
- free format |
| 197 |
- ARM optimizations |
| 198 |
|
| 199 |
18.0.18 (mpg123 1.8) |
| 200 |
- new parameter: MPG123_PREFRAMES is now tunable (the number of frames to decode and skip before a seek point), also default value increased |
| 201 |
|
| 202 |
17.0.17 (mpg123 1.8) |
| 203 |
- introduction optimized stereo synths |
| 204 |
|
| 205 |
16.0.16 (mpg123 1.8) |
| 206 |
- introducing floating point x86-64 SSE synth |
| 207 |
|
| 208 |
15.0.15 (mpg123 1.8) |
| 209 |
- first addition of x86-64 SSE optimizations |
| 210 |
|
| 211 |
14.0.14 (mpg123 1.7) |
| 212 |
- the first libmpg123 with actually working MPG123_UPSPEED |
| 213 |
- also important regression fix concerning skipping of frames |
| 214 |
|
| 215 |
13.0.13 (mpg123 1.7) |
| 216 |
- The whole set of output formats is generally available (8, 16 and 32 bit integer, signed/unsigned, float) |
| 217 |
- Many features can be absent from libary as build decision (minimize binary size). |
| 218 |
|
| 219 |
12.0.12 (mpg123 1.7) |
| 220 |
- added mpg123_current_decoder |
| 221 |
- fixed value of MPG123_ENC_FLOAT |
| 222 |
- float output now is a real runtime option |
| 223 |
|
| 224 |
11.0.11 (mpg123 1.6) |
| 225 |
- added mpg123_getstate |
| 226 |
- run-time tunable frame index |
| 227 |
- officially configured with largefile support where available |
| 228 |
|
| 229 |
10.0.10 (mpg123 1.6) |
| 230 |
- new flag MPG123_FUZZY (along with the fuzzy seek functionality) |
| 231 |
|
| 232 |
9.0.9 (mpg123 1.6) |
| 233 |
- added mpg123_tell_stream |
| 234 |
|
| 235 |
8.0.8 (mpg123 1.6) |
| 236 |
- added mpg123_get_eq |
| 237 |
|
| 238 |
7.0.7 (mpg123 1.6) |
| 239 |
- added mpg123_set_filesize |
| 240 |
|
| 241 |
6.0.6 (mpg123 1.5) |
| 242 |
- added mpg123_icy2utf8 |
| 243 |
|
| 244 |
5.0.5 (mpg123 1.5) |
| 245 |
- added mpg123_feed |
| 246 |
- input buffers now const |
| 247 |
|
| 248 |
4.0.4 (mpg123 1.5) |
| 249 |
- extended mpg123_string api (mpg123_add_substring, mpg123_grow_string) |
| 250 |
|
| 251 |
3.0.3 (mpg123 1.5) |
| 252 |
- Initial floating point support as compile-time option. |
| 253 |
|
| 254 |
2.0.2 (mpg123 1.3) |
| 255 |
- New flag MPG123_SEEKBUFFER. |
| 256 |
|
| 257 |
1.0.1 (mpg123 1.2) |
| 258 |
- Added MPG123_RESYNC_LIMIT parameter. |
| 259 |
- Added MPG123_OUT_OF_SYNC and MPG123_RESYNC_FAIL error codes. |
| 260 |
- Fix for uninitialized framesize value in handle. |
| 261 |
|
| 262 |
0.0.0 (mpg123 1.0) |
| 263 |
- Initial library design. |