| 1 |
1.33.6 |
| 2 |
------ |
| 3 |
- mpg123 |
| 4 |
-- Prepare for const-returning strchr(). |
| 5 |
-- Hide seq_len debugging counter in non-debug mode (handle github PR 20). |
| 6 |
-- Fix memory leak with --network internal due to inverted NULL check in |
| 7 |
net123_close_internal() (handle never NULL in practice, though; bug 386). |
| 8 |
- mpg123, out123: Fix strrchr() usage to be more const and correct under C99 as well |
| 9 |
as C23 (handles PR 19 on the github mirror). |
| 10 |
- mpg123-strip: Also use largefile API properly using mpg123config.h, but without |
| 11 |
actual effect at least on Linux/x86. It is cleaner that way, though. |
| 12 |
- ports/cmake: Yasm is not neeeded for Clang on MSVC (github PR 23, thanks to Alexander |
| 13 |
Lobakin). |
| 14 |
- libmpg123: Remove unused loop variable in layer2 left over from runtime table |
| 15 |
elimination (32 bit mmx/sse code, prompted by github PR 22). |
| 16 |
|
| 17 |
1.33.5 |
| 18 |
------ |
| 19 |
- mpg123: Fix generic control mode for largefile-sensitive builds, where 32 bit |
| 20 |
off_t was used with mpg123 API calls expecting 64 bit off_t. |
| 21 |
I am appalled that it took a user on 32 bit ARM and a specific https stream |
| 22 |
to notice this (bug 385, regression since 1.32.0). |
| 23 |
The security impact of this could be serious, with memory corruption including |
| 24 |
segfault being observed. |
| 25 |
- mpg123-id3dump, out123: Enable 64 bit offset usage on largefile-sensitive |
| 26 |
platforms (regression since 1.32.0). |
| 27 |
- libmpg123: |
| 28 |
-- Announce support for shadow stack / IBT in x86-64 assembly. |
| 29 |
-- Also announce PAC/BTI for non-accurate neon64 (aarch64) synth. |
| 30 |
- libout123: Add a safeguard to ensure variable-length records from buffer |
| 31 |
communication are always zero-terminated. |
| 32 |
- libsyn123: Use union work buffer to avoid casts that may look like breaking |
| 33 |
strict aliasing. |
| 34 |
|
| 35 |
1.33.4 |
| 36 |
------ |
| 37 |
- mpg123: In terminal control, ignore 7-bit escape sequences to avoid spurious |
| 38 |
actions, e.g. when hitting cursor keys. Inspired by Peter Tirsek. |
| 39 |
- ports/cmake: Avoid possibly conflicting use of SIZEOF_OFF_T CMake variable |
| 40 |
when embedding mpg123 with other projects using cmake and different off_t |
| 41 |
semantics. (bug 382) |
| 42 |
|
| 43 |
1.33.3 |
| 44 |
------ |
| 45 |
- libmpg123: |
| 46 |
-- Fix build with newer toolchain on Android by using __ANDROID__ macro (bug 380). |
| 47 |
-- Consolidate and more consistently use .rodata switch in macro. |
| 48 |
|
| 49 |
1.33.2 |
| 50 |
------ |
| 51 |
- libmpg123: |
| 52 |
-- Do not modify raw ID3v2 data while parsing (bug 379). This used to be fine |
| 53 |
before MPG123_STORE_RAW_ID3 got introduced. Not anymore. |
| 54 |
|
| 55 |
1.33.1 |
| 56 |
------ |
| 57 |
- INSTALL updated with hints for Windows, mainly. |
| 58 |
- Finally formatted README. Maybe do it in Markdown sometime, as that's |
| 59 |
the fashion. |
| 60 |
- build: |
| 61 |
-- The ports/cmake only installs manpages for BUILD_PROGRAMS now. |
| 62 |
-- The configure gives better hint if pkg-config was missing during generation |
| 63 |
(bug 378). |
| 64 |
- mpg123: |
| 65 |
-- Replace usage of signal() in terminal code with our sigaction() wrapper |
| 66 |
to fix repeated handling for --sigusr1 and --sigusr2, which got subtly |
| 67 |
broken on Linux + glibc by a feature test macro change in mpg123 1.31. |
| 68 |
|
| 69 |
1.33.0 |
| 70 |
------ |
| 71 |
- mpg123 |
| 72 |
-- Fix printout of filenames at end (convert/limit text encoding). |
| 73 |
-- Treat HTTP header encoding as unknown/ASCII and formally convert to UTF-8. |
| 74 |
-- Make --continue mode work with --random. |
| 75 |
-- Handle possible failure of __wgetmainargs on Windows (bug 375). |
| 76 |
- mpg123-id3dump: Fix up command line arg handling for Windows. |
| 77 |
- out123 |
| 78 |
-- Finally give zero exit code when generating sounds, not indicating |
| 79 |
spurious failure. |
| 80 |
- build: |
| 81 |
-- Use CCASFLAGS for assembler tests, to enable builds that enable instruction |
| 82 |
sets that way (bug 377). |
| 83 |
-- PIC for compat libs (convenience libs used during build) only if building |
| 84 |
shared libs (github PR 17 by Wouter Wijsman). |
| 85 |
- compat: |
| 86 |
-- Map strtok use to strtok_r or strtok_s (MS platforms), if possible. |
| 87 |
users only in control_generic and libout123 so far. Out123 itself uses mytok. |
| 88 |
Shall fix bug 376 (build with MSVC again). |
| 89 |
-- Enable build on PSP by merging in the hotfix of opmitting signal code |
| 90 |
(github PR 18 by Wouter Wijsman). |
| 91 |
- libout123 |
| 92 |
-- modules/win32: Align waveOutGetDevCapsA to WAVEOUTCAPSA, in anticipation |
| 93 |
of some UNICODE change. |
| 94 |
- libmpg123 |
| 95 |
-- API version 49 with added mpg123_open_handle64(), mpg123_open64(), and |
| 96 |
mpg123_open_fixed64() that are not subject to largefile renaming. This |
| 97 |
means you can still access internal I/O with MPG123_PORTABLE_API. The |
| 98 |
code has been there before, anyway. |
| 99 |
-- With MPG123_PORTABLE_API, mpg123_open_handle() is hidden now (use |
| 100 |
mpg123_open_handle64() instead). |
| 101 |
-- more silence on errors (sideband limit message) |
| 102 |
|
| 103 |
1.32.10 |
| 104 |
------ |
| 105 |
- scripts/tag_lyrics.py: fix for python3 (thanks to cclauss, |
| 106 |
github PR 16) |
| 107 |
- libout123: Use strtok_r() to avoid conflicts multithreaded contexts |
| 108 |
(both sides should avoid plain strtok()! Debian-bug 1089543). |
| 109 |
- libmpg123: |
| 110 |
-- Un-break DLL builds that need I/O functions defined in libmpg123.c |
| 111 |
(like mpg123_open(), bug 374). |
| 112 |
- ports/cmake: More fixup to also produce .pc files with Libs.private. |
| 113 |
|
| 114 |
1.32.9 |
| 115 |
------ |
| 116 |
- libmpg123: |
| 117 |
-- enable 64 bit offset path for MSVCRT and avoid warnings about |
| 118 |
MS's game about POSIX API with and without underscores (bug 373). |
| 119 |
-- Increase the library patchlevel, as was forgotten on previous |
| 120 |
release. Now you can check for distversion >= 1.32.8 or |
| 121 |
mpg123 libversion >= 48 patchlevel 3 to see if you're vulnerable |
| 122 |
to CVE-2024-10573. |
| 123 |
|
| 124 |
1.32.8 |
| 125 |
------ |
| 126 |
- libmpg123: |
| 127 |
-- Add sections to assembly to support PAC/BTI code |
| 128 |
for aarch64 (-mbranch-protection variants), thanks to Bill Roberts |
| 129 |
(github PR 15). |
| 130 |
-- Prevent premature application of header info into decoding structure, |
| 131 |
at worst having triggered out-of-bounds writes of decoded PCM data |
| 132 |
(bug 322, again). The bug got named CVE-2024-10573. |
| 133 |
- out123: Show --quiet in --longhelp. |
| 134 |
|
| 135 |
1.32.7 |
| 136 |
------ |
| 137 |
- ports/cmake: Work around bug in CMake that does not detect FPU on |
| 138 |
Apple ARM CPUs (github PR 14). |
| 139 |
- Fix some laziness (func() to func(void)) for standards conformance. |
| 140 |
|
| 141 |
1.32.6 |
| 142 |
------ |
| 143 |
- build: Detect forced 64 bit offsets on a dual-mode system that used |
| 144 |
to default to 32 bits and drop ambiguous suffix-less symbols in that |
| 145 |
case. This avoids subtle ABI breakage (causing memory corruption) |
| 146 |
with existing binaries and instead has them fail during runtime linking. |
| 147 |
You trigger that when having -D_FILE_OFFSET_BITS=64 in your compiler |
| 148 |
flags during mpg123 build. |
| 149 |
|
| 150 |
1.32.5 |
| 151 |
------ |
| 152 |
|
| 153 |
- build: |
| 154 |
-- CMake port uses CFLAGS for pulse/jack/tinyalsa properly now (bug 366). |
| 155 |
-- CMake port links libsyn123 with libm now (bug 370). |
| 156 |
- libmpg123: |
| 157 |
-- Fix --enable-portable (no usage of LFS_WRAP_NONE, bug 368). |
| 158 |
-- Fix dct36 wrapper usage for x86-64 and NEON. Stupid (bug 367) and |
| 159 |
also avoid returning void. |
| 160 |
-- Make ARM builds work with nagging (missing feature macros for std=c99). |
| 161 |
|
| 162 |
1.32.4 |
| 163 |
------ |
| 164 |
- build: |
| 165 |
-- Reorganize shared headers, API headers into src/include. |
| 166 |
-- Use relative include paths, avoiding internal directories in |
| 167 |
CPPFLAGS except for config.h. |
| 168 |
-- Group C99 feature checks and make several standard headers |
| 169 |
mandatory. |
| 170 |
-- Get rid of SIZE_P, OFF_P and friends. |
| 171 |
-- Only enforce dummy module together with libout123, to be able |
| 172 |
to build individual modules using --disable-components logic. |
| 173 |
- out123: |
| 174 |
-- added --libversion |
| 175 |
- libmpg123: |
| 176 |
-- Avoid indirect branches into the assembly routines by using C wrappers |
| 177 |
also for dct36, relieving us of the need to care for bti / endbr |
| 178 |
instructions for control flow integrity. |
| 179 |
|
| 180 |
1.32.3 |
| 181 |
------ |
| 182 |
- ports/cmake: Only enable modules with GetThreadErrorMode() on Windows. |
| 183 |
- compat: Define EOVERFLOW for ancient Windows toolchains. |
| 184 |
- libmpg123, libsyn123: always ifdef LFS_LARGEFILE_64 (not just if) |
| 185 |
- libsyn123: re-introduce _32 wrappers in addition to suffix-less ones |
| 186 |
(regression from 1.31, bug 363) |
| 187 |
|
| 188 |
1.32.2 |
| 189 |
------ |
| 190 |
- libmpg123: Re-introduce _64 symbols on native 64 bit offset platforms. This |
| 191 |
was a regression since 1.31 series. Sorry, too much cleanup, not enough |
| 192 |
testing. |
| 193 |
- build: |
| 194 |
-- Better O_LARGEFILE logic, avoiding redefintion. |
| 195 |
- ports/cmake: |
| 196 |
-- Require C99 (bug 360, among other points, thanks to Ozkan Sezer). |
| 197 |
-- Fix broken O_LARGEFILE logic (bug 360). |
| 198 |
-- Typo fix and cleanup, also manual SSE switch for Android on old x86 (bug 359). |
| 199 |
|
| 200 |
1.32.1 |
| 201 |
------ |
| 202 |
- Include man pages again in tarball and install. We cannot avoid the empty |
| 203 |
man directory when disabling programs with autoconf. |
| 204 |
- Fix signal handler prototype, avoiding some justified warnings. |
| 205 |
- ports/cmake: |
| 206 |
-- Include CheckTypeSize, which seems to be needed sometimes (bug 357). |
| 207 |
-- Avoid O_LARGEFILE redefinition, logic closer to autoconf. |
| 208 |
|
| 209 |
1.32.0 |
| 210 |
------ |
| 211 |
- build: |
| 212 |
-- Move version handling out of configure.ac to ease other build systems. |
| 213 |
-- Include "fmt123.h" instead of <fmt123.h> in main API headers to make it more likely the |
| 214 |
correct one is included (at least gcc picks the one in the same directory as the |
| 215 |
including header first). |
| 216 |
-- All headers are build-independent now. |
| 217 |
-- Fix build for picky linkers by avoiding definition of wrap_getcpuflags() where it is not |
| 218 |
used (spurious linker error to non-exitent getcpuflags(), bug 353). |
| 219 |
-- Handle deprecation of C99 detection macro in autoconf 2.70. |
| 220 |
-- No use of AC_SYS_LARGEFILE anymore for explicit handling and differing choice for |
| 221 |
the libraries and frontend programs. |
| 222 |
-- Added --enable-portable and --disable-largefile to configure, removing the other |
| 223 |
largefile-related options. |
| 224 |
-- Added --disable-components --enable-libmpg123 to only build libmpg123 (and likewise |
| 225 |
--enable-libout123, --enable-libout123-modules, --enable-libsyn123) to autoconf |
| 226 |
build. CMake build has something similar with BUILD_PROGRAMS and BUILD_LIBOUT123, |
| 227 |
which leave only libmpg123 and libsyn123 if disabled). (bug 351) |
| 228 |
-- Consistent formatting of ./configure --help with AS_HELP_STRING(). |
| 229 |
- ports/Sony_PSP: removed |
| 230 |
- mpg123: |
| 231 |
-- Added --libversion. |
| 232 |
-- Added proper A-B looping with terminal control key 'o', renamed |
| 233 |
--pauseloop to --presetloop. |
| 234 |
-- Really get rid of mpg123_position() usage. (It was all lies before!) |
| 235 |
-- Fix terminal progress info when seeking in stopped mode (1.31 regression). |
| 236 |
-- Patch up interaction of output buffer with generic remote control, adding |
| 237 |
non-interruptible drain after P 3, and dropping buffer on QUIT. |
| 238 |
-- Uppercase some generic control replies for consinstency: SILENCE, PROGRESS, |
| 239 |
MUTE, UNMUTE |
| 240 |
- libmpg123, libout123, libsyn123: |
| 241 |
-- Bumped API version for version query functions. |
| 242 |
-- Replaced nearly all symbol renames with explicit INT123_ prefix declarations |
| 243 |
(intsym.h close to empty now). |
| 244 |
- libout123: |
| 245 |
-- Add sleep builtin output module (silent, but proper timing). |
| 246 |
- libsyn123: |
| 247 |
-- Introduced SYN123_PORTABLE_API for an API without off_t and ssize_t |
| 248 |
(see NEWS.libsyn123). |
| 249 |
- libmpg123: |
| 250 |
-- Internal I/O using explicit largefile support via off64_t, lseek64, fallback |
| 251 |
to plain 32 bit off_t. |
| 252 |
-- Added explicit 64 bit API with 64 suffix (mpg123_tell64(), not mpg123_tell_64()). |
| 253 |
This allows full avoidance of ambiguus off_t. The API is always using 64 bit |
| 254 |
integers, regardless of internal implementation. (bug 344) |
| 255 |
-- Introduced MPG123_PORTABLE_API for an API subset without off_t and |
| 256 |
ssize_t. |
| 257 |
-- Made mpg123_seek() and friends ignore offset sign for SEEK_END (always seeking |
| 258 |
towards beginning, assuming negative offset) to make lseek()-conforming usage |
| 259 |
possible. Seeking beyond the end never made sense, so no loss of valid functionality. |
| 260 |
- Overall use of INT123_strerror(), trying to use thread-safe strerror_l() if possible. |
| 261 |
|
| 262 |
1.31.3 |
| 263 |
------ |
| 264 |
|
| 265 |
- build: |
| 266 |
-- Fix --disable-8bit. |
| 267 |
-- Fall back to generic decoder if no yasm for MSVC (bug 346). |
| 268 |
-- Fix some pedantic compiler warnings, avoid breaking libtool wrappers. |
| 269 |
- mpg123: |
| 270 |
-- Fix verbose position printout for new resampling outside libmpg123 (where |
| 271 |
output rate differs from decoding rate). |
| 272 |
- libsyn123: |
| 273 |
-- Fix reconfiguration of resampler to avoid double free when reducing |
| 274 |
decimator stages to zero (bug 350). Thanks to Youngseok Choi for reporting |
| 275 |
this fuzzed issue. |
| 276 |
|
| 277 |
1.31.2 |
| 278 |
------ |
| 279 |
- Fix build --with-network=internal only (configure logic error, bug 348). |
| 280 |
- Fix OS/2 build with getaddrinfo() (which may support IPv6 eventually, thanks |
| 281 |
to Dave Yeo). |
| 282 |
|
| 283 |
1.31.1 |
| 284 |
------ |
| 285 |
- Fix largefile aliases for the case of a largefile-insensitive build |
| 286 |
that still does define _FILE_OFFSET_BITS from the outside |
| 287 |
(sys/feature_tests.h on Illumos). |
| 288 |
|
| 289 |
1.31.0 |
| 290 |
------ |
| 291 |
|
| 292 |
- mpg123: |
| 293 |
-- Finally make terminal control work on Windows, for real. Building it |
| 294 |
was broken in 1.30.x. |
| 295 |
-- The --control / -C switch will make mpg123 abort now if terminal |
| 296 |
control cannot be enabled. |
| 297 |
-- Revert to internal network code for plain HTTP to ensure continued |
| 298 |
support for original shoutcast servers that do not talk proper HTTP. |
| 299 |
External backends are built at the same time and can be enforced using |
| 300 |
--network <backend>. |
| 301 |
-- Try-witout-port for internal network code is gone. We do not need to |
| 302 |
keep each ancient hack for specific hosts. |
| 303 |
-- Handle redirections independently of the backend behind net123. |
| 304 |
-- Set proxy environment variables when --proxy is specified, for net123 |
| 305 |
backends to use. |
| 306 |
-- Continue reading for long commands in generic control, avoiding |
| 307 |
unnecessary unfinished command errors. |
| 308 |
-- Change error message from 'unknown command' to |
| 309 |
'unknown command with arguments' to avoid confusion why 'help foo' |
| 310 |
is unknown, as opposed to 'help'. |
| 311 |
-- Reduce CPU load while just waiting for terminal input |
| 312 |
(thanks to bolshoytoster on github). |
| 313 |
-- Condense terminal control help output and excessive vertical whitespace |
| 314 |
in printouts (inspired by Volkmar Klatt). |
| 315 |
-- Fix interaction of pause (looping) with buffer, adding --pauseloop |
| 316 |
to set the loop interval. |
| 317 |
-- Numeric option arguments are strictly checked now for conversion errors. |
| 318 |
This also catches -devbuffer, which was interpretd as -d 0 before. This |
| 319 |
also applies to out123. |
| 320 |
- libout123: |
| 321 |
-- Add same interruption handling to out123_write() as to |
| 322 |
unintr_write(), adding EAGAIN to fix bug 342 (thanks to Steffen Nurpmeso) |
| 323 |
for certain ALSA setups. |
| 324 |
-- Add --devbuffer support to win32 output and change default to 0.25 seconds. |
| 325 |
-- Fix race condition to deadlock on buffer_sync_param() where parameters after |
| 326 |
the command byte got read as more commands. This got triggered easily by |
| 327 |
using the pause key in terminal mode with buffer (which was discouraged |
| 328 |
before because of buffer flushing). Generally, changing parameters with |
| 329 |
active buffer process was dangerous since libout123 entered the scene. |
| 330 |
- some build fixes for compiler pickyness |
| 331 |
- Disable largefile renames also for non-sensitive POSIX systems |
| 332 |
(in some distant future, the alias symbols could go away, then … |
| 333 |
bug 330). |
| 334 |
- Fix Android NDK x86 builds with GLOBAL_VAR_PTR use in assembly (bug 345). |
| 335 |
|
| 336 |
1.30.2 |
| 337 |
------ |
| 338 |
- Only use EWOULDBLOCK if the macro is defined (FreeBSD misses it for |
| 339 |
_POSIX_SOURCE, bug 339). |
| 340 |
|
| 341 |
1.30.1 |
| 342 |
------ |
| 343 |
- mpg123: |
| 344 |
-- Show stderr of network helpers in -vvv mode. |
| 345 |
-- Use curl --http0.9, if available, to support shoutcast v1 streams |
| 346 |
without wget (wget not needing such switch, yet). |
| 347 |
-- Support file:// URLs for local access as was intended with the last |
| 348 |
release. |
| 349 |
-- Give more helpful error message if neither wget nor curl are usable, also |
| 350 |
allow error messages from curl to appear when not --quiet. |
| 351 |
-- Update the man page. |
| 352 |
|
| 353 |
1.30.0 |
| 354 |
------ |
| 355 |
- build: |
| 356 |
-- Use dummy as default module when no other outputs are enabled. This also |
| 357 |
fixes a non-module build with just the dummy (bug 333). |
| 358 |
-- Use CMAKE_CURRENT_SOURCE_DIR in CMake build to help nested use (bug 335). |
| 359 |
-- some updates for OS/2 support (fixing up stdin playing, for example) |
| 360 |
- mpg123: |
| 361 |
-- new network backend using external tools/libraries to also support HTTPS |
| 362 |
-- old network backend changed to use h_addr_list[0] instead of h_addr |
| 363 |
-- terminal control keys now case-sensitive (fixing smal/big pitch controls) |
| 364 |
-- additional terminal control keys for simple equalizer control (A/a for bass, |
| 365 |
J/j for mids, N/n for treble, e for reset, E for printout) |
| 366 |
-- terminal volume control now in decibel steps and bounded to +/- 60 dB |
| 367 |
-- terminal control now also with audio from stdin (bug 338) via |
| 368 |
/dev/tty or ctermid() |
| 369 |
-- terminal control also available for OS/2 and Windows platforms |
| 370 |
-- re-print tag info on decrease of terminal width for a bit less mess |
| 371 |
-- always print an empty line after tag info for cleaner appearance |
| 372 |
-- print lyrics also to stderr |
| 373 |
-- remote control API v10 with "@P 3" as additonal message on track end |
| 374 |
-- also added PROGRESS command as opposite of SILENCE |
| 375 |
-- fix some verbosity, tweak help for --icy-interval |
| 376 |
-- added --auth-file |
| 377 |
-- also obscure argument to --auth for others |
| 378 |
-- Cygwin/MinGW: Provide _win32_utf8_wide and _win32_wide_utf8 unconditionally. |
| 379 |
It is needed by the WASAPI plugins, the underlying conversion functions |
| 380 |
should be present since Windows 2000. Fixes WASAPI support on Cygwin. |
| 381 |
Also needed for new network code. |
| 382 |
- libout123: |
| 383 |
-- pulse: initialize more error codes to avoid bogus error messages |
| 384 |
-- os2: considerable fixup for proper writes of full buffers avoiding |
| 385 |
nasty effects from the ... special audio system, more cleanup still |
| 386 |
nice-to-have, but still lacking |
| 387 |
|
| 388 |
1.29.4 |
| 389 |
------ |
| 390 |
- libmpg123: |
| 391 |
-- Saturate reader file position at off_t limit to satisfy |
| 392 |
undefined behaviour checkers. |
| 393 |
-- Avoid harmless unitialized value in ID3v1 check (filepos, later being |
| 394 |
set before actual use). |
| 395 |
- libout123: |
| 396 |
-- Build fix for win32_wasapi output for predefined _WIN32_WINNT (bug 329), |
| 397 |
thanks to Vincent Torri. |
| 398 |
|
| 399 |
1.29.3 |
| 400 |
------ |
| 401 |
- libmpg123: Catch more NULL pointer arguments in LFS wrappers |
| 402 |
(most prominently: mpg123_feedseek(), bug 328). |
| 403 |
- mpg123: |
| 404 |
-- Fix regression that did _not_ enable --remote-err on -s anymore. |
| 405 |
-- Fix typos in man page (thanks to Naglis Jonaitis). |
| 406 |
-- Drop mixed-up value limits on remote control SEQ command. It is up to you |
| 407 |
if you want to distort your sound. |
| 408 |
-- Add note about equalizer frequency bands to man page. |
| 409 |
- build: add BUILD_PROGRAMS option to ports/cmake |
| 410 |
|
| 411 |
1.29.2 |
| 412 |
------ |
| 413 |
- libmpg123: Fix non-live-decoder safeguard for mpg123_framebyframe_decode() |
| 414 |
(was a no-op in practice, bug 324). |
| 415 |
|
| 416 |
1.29.1 |
| 417 |
------ |
| 418 |
- mpg123: |
| 419 |
-- Keep default output encoding of s16 for raw and file outputs |
| 420 |
also with the new resampler. This reverts the unintentional change in |
| 421 |
1.26.0 of switching to f32 for forced output rate unless the NtoM |
| 422 |
resampler is selected. In any case, you should make sure to specify |
| 423 |
your desired --encoding if you depend on it. |
| 424 |
-- Catch error in indexing (mpg123_scan() return value was ignored |
| 425 |
before, bug 322). |
| 426 |
- mpg123-strip: Lift the resync limit, as it should be to clean up really |
| 427 |
dirty streams. |
| 428 |
- mpg123-id3dump: Also lift resync limit for the same reasons. |
| 429 |
- libout123: fix reporting of device property flags for buffer |
| 430 |
- libmpg123: more safeguarding against attempts to decode if decoder |
| 431 |
setup failed and user ignored the returned error code (bug 322) |
| 432 |
|
| 433 |
1.29.0 |
| 434 |
------ |
| 435 |
- build: added --enable-runtime-tables |
| 436 |
- libmpg123: |
| 437 |
-- Float deocder runtime table computation is back as option, |
| 438 |
based on suggestion and initial patch by Ethan Halsall for a smaller |
| 439 |
download size of the wasm decoder built from libmpg23. This only |
| 440 |
trims the size of the binary on disk (network), for runtime |
| 441 |
overhead and a bit of uneasyness about concurrency during table |
| 442 |
computation, which happens implicitly on handle initialization, |
| 443 |
only guarded by an integer flag. This does _not_ revive |
| 444 |
mpg123_init(). |
| 445 |
-- The ID3v2 UTF-16 BOM check is now a straight-on loop and not a |
| 446 |
recursive function. |
| 447 |
|
| 448 |
1.28.2 |
| 449 |
------ |
| 450 |
- libout123 |
| 451 |
-- Complete the fix for bug 314, reopening the device after format |
| 452 |
setup failure. |
| 453 |
|
| 454 |
1.28.1 |
| 455 |
------ |
| 456 |
- build: |
| 457 |
-- Explain --with-default-audio in configure help better. |
| 458 |
-- Fix build of arm_fpu (regression of configure reorg). |
| 459 |
-- Re-introduce AC_PROG_C_C99 macro for autoconf 2.69, it's only |
| 460 |
obsolete after that. |
| 461 |
-- Un-break CMake build for botched move of CheckCPUArch.c.in (bug 315). |
| 462 |
-- Avoid conflict of warning macro with MSVC pragmas in two places. Also |
| 463 |
fix UWP build with strerror check and move down inclusion of intsym.h |
| 464 |
(bug 316). |
| 465 |
-- Disable libout123 (and mpg123, out123) on UWP with cmake to get at least |
| 466 |
the decoder lib built (317). |
| 467 |
-- Hack around CMake bug(?) with QUERY_HAS_FPU to make ports/cmake also |
| 468 |
work in MinGW (bug 318). |
| 469 |
- libmpg123: |
| 470 |
-- Make mpg123.h.in usable again with MPG123_NO_CONFIGURE, |
| 471 |
for external uses (bug 313). |
| 472 |
-- Use predefined MPG123_API_VERSION in mpg123.h.in for the same. |
| 473 |
-- Better handle the ssize_t situation via typedef mpg123_ssize_t, less |
| 474 |
likely to be broken in future MSVC versions. |
| 475 |
-- Fix an integer constant definition for the most negative 32 bit numnber to |
| 476 |
avoid justified compiler complaints. |
| 477 |
- libsyn123: |
| 478 |
-- More support for MPG123_NO_CONFIGURE. |
| 479 |
-- Optionally use predefined SYN123_API_VERSION in syn123.h.in for the same. |
| 480 |
-- Add a cast to silence integer sign warning for offset in muloffdiv64() |
| 481 |
(bug 317) |
| 482 |
- libout123: |
| 483 |
-- Pulse module advertises wider format support now, not |
| 484 |
just s16. This makes mpg123 -e s24 work with it, not just out123. |
| 485 |
-- Optionally use predefined OUT123_API_VERSION in out123.h.in for |
| 486 |
non-configure use. |
| 487 |
-- Fix sndio output to properly query device format support and get |
| 488 |
default fomat on FreeBSD (bug 314). |
| 489 |
|
| 490 |
1.28.0 |
| 491 |
------ |
| 492 |
- build: |
| 493 |
-- Fix up the build to actually build all library objects with libtool |
| 494 |
consistently, also ensuring no pointless static archives for output |
| 495 |
modules. |
| 496 |
-- Adapted things to autoconf 2.71, requiring 2.69 now (the latter tested |
| 497 |
on Debian, with their patches). |
| 498 |
-- Improved configure to be more useful --with-default-audio to define |
| 499 |
the search order, fix static build for --with-audio being a list |
| 500 |
(just choosing the first one). |
| 501 |
-- Ensure consistent use of LINK_MPG123_DLL in headers. |
| 502 |
- build (ports/cmake): |
| 503 |
-- Thanks to Evgeni Poberezhnikov for working with us on that. |
| 504 |
-- Fix up ports/cmake to really work in MSVC also for users of the lib |
| 505 |
(tested in vcpkg, bug 310). |
| 506 |
-- Hardcode ports/cmake CPU detection for x64 and ARM as |
| 507 |
CMAKE_SYSTEM_PROCESSOR is useless crap (bug 298 for real). |
| 508 |
-- Add missing io.h for _setmode() MSVC warned about (bug 311). |
| 509 |
-- Added BUILD_NO_LARGENAME define to be used by MSVC builds. Note that |
| 510 |
an MSVC build of libmpg123 does not support 64 bit file offsets. |
| 511 |
That would need more morting to the explicit API. Thanks to MS for |
| 512 |
making off_t even more messy and less useful. |
| 513 |
-- Added JACK output, fixed handling of compat_str there and in win32_wasapi. |
| 514 |
- libsyn123: Fix syn123_mix() to actually do intermediate conversion |
| 515 |
when input and output encoding are the same but non-float. This makes |
| 516 |
out123 --mix work with s16 input and output, which is not that special! |
| 517 |
- libmpg123: Fix misguided handling of part2_3_length checks in |
| 518 |
III_get_scale_factors_1() and III_get_scale_factors_2() which invalidated |
| 519 |
decoding of a mono source encoded as ms+i-stereo (bug 312). This was |
| 520 |
a regression introduced with version 1.25.7. |
| 521 |
- libout123: |
| 522 |
-- Print basic module loading errors only for last one in list. |
| 523 |
This enables use of an output module search list that anticipates module |
| 524 |
files not installed with the main package. |
| 525 |
-- Fixes for win32_wasapi build with MSVC. |
| 526 |
|
| 527 |
1.27.2 |
| 528 |
------ |
| 529 |
|
| 530 |
(Trying some svn tag discipline: 1.27.1 has been tagged before, but |
| 531 |
not released. Let's increment for any change.) |
| 532 |
|
| 533 |
- Removed ports/Xcode, ports/cmake should handle that case. |
| 534 |
- Ensure debug.h is included last where it matters to avoid |
| 535 |
conflicts with debug/warning macros in system headers |
| 536 |
(bug 308). |
| 537 |
- Fix some debug/printf integer casts for 32 bit platforms (bug 309). |
| 538 |
|
| 539 |
1.27.0 |
| 540 |
------ |
| 541 |
|
| 542 |
- libmpg123: |
| 543 |
-- Running on precomputed tables now, no need to call |
| 544 |
mpg123_init() anymore. That and mpg123_exit() are both just |
| 545 |
empty shells. You can omit them if you do not care about earlier |
| 546 |
libmpg123. You can check for MPG123_API_VERSION >= 46. |
| 547 |
-- Added API that avoids enums, mapped-to by default unless |
| 548 |
MPG123_ENUM_API is defined. |
| 549 |
- libout123: |
| 550 |
-- Added API that avoids enums, mapped-to by default unless |
| 551 |
MPG123_ENUM_API is defined. |
| 552 |
-- Added device enumeration for win32, win32_wasapi, alsa, pulse. |
| 553 |
This increments the output module ABI version to 3. |
| 554 |
-- You can choose output devices now on Windows. |
| 555 |
-- Changed default output module order to put pulse before alsa since |
| 556 |
we now ensure that pulse is not inadvertedly started by the |
| 557 |
autospawn feature. This improves the experience on desktop |
| 558 |
systems with pulse where the alsa to pulse use causes glitches. |
| 559 |
Note that on a modern Linux desktop (Ubuntu), you will not |
| 560 |
escape an instance of pulseaudio being started, with even the |
| 561 |
enumeration of the ALSA default device summoning the daemon. |
| 562 |
If you _want_ sound daemon autospawn behaviour on other platforms, |
| 563 |
you need to trigger it outside of libout123. |
| 564 |
- examples: Update for dropped mpg123_init(), more sensible |
| 565 |
copyright notes. |
| 566 |
- out123: |
| 567 |
-- safer limiting of maximum playback rate |
| 568 |
-- Added --list-devices. |
| 569 |
- mpg123: |
| 570 |
-- Fix --continue output to print track_count+1 as continue |
| 571 |
position after hitting the end of playlist. Makes scripts/conplay |
| 572 |
go to back to the beginning again (regression in 1.24.0, bug 250). |
| 573 |
-- Remote control API version 9 with @I { .. @I } wrapping of ID3 and |
| 574 |
playlist display. |
| 575 |
-- Added --list-devices. |
| 576 |
-- Fix console printout on Windows. |
| 577 |
-- Fix terminal control logic to better handle cases where stdin or |
| 578 |
stderr is not a terminal, also avoid enabling control if you specify |
| 579 |
stdin as input file. |
| 580 |
- Updated debugging/warning/error message macros to include the function |
| 581 |
name. |
| 582 |
|
| 583 |
1.26.5 |
| 584 |
------ |
| 585 |
- Add ./configure --enable-xdebug (for the resampler issue). |
| 586 |
- Avoid denormals in the resampler by adding an alternating offset |
| 587 |
(helps performance without -ffast-math, depending on platform). |
| 588 |
- libmpg123: |
| 589 |
-- Fix ID3v2 APIC parsing when frame length bit is set (bug 306). |
| 590 |
-- Also handle the group flag (skip the group byte). |
| 591 |
-- Also fix up frame flag handling for ID3v2.3. Did not crop up yet, |
| 592 |
but it was just wrong. Impact was not detecting and bailing out on |
| 593 |
compressed or encrypted frames properly. |
| 594 |
|
| 595 |
1.26.4 |
| 596 |
------ |
| 597 |
- Clarify seeking documentation regarding samples and PCM frames. |
| 598 |
- Fix build on MorphOS (patch by Ozkan Sezer, bug 295). |
| 599 |
- Fix cmake build to install fmt123.h. |
| 600 |
- Some cmake build fixes, tinyalsa addition by Maarten (bug 299). |
| 601 |
- libmpg123: explicitly handle some irrelevant corner cases in tabinit |
| 602 |
(bug 279) |
| 603 |
|
| 604 |
1.26.3 |
| 605 |
------ |
| 606 |
- Fix accurate (--enable-int-quality) and s32 x86-64 assembly for Windows ABI |
| 607 |
(thanks to Robert Kausch of fre:ac). The accurate code just crashed before. |
| 608 |
|
| 609 |
1.26.2 |
| 610 |
------ |
| 611 |
- Enable terminal control by default only when both input and output |
| 612 |
are connected to a terminal. This avoids messing with terminal settings |
| 613 |
when piping stderr to a pager, which takes over terminal input anyway, |
| 614 |
while mpg123 still thinks it got control. |
| 615 |
- Windows build fixes for UWP and without GetThreadErrorMode when not |
| 616 |
building modules, thanks to Steve LHomme. |
| 617 |
- Android build fix regarding off64_t use, thanks to Steve LHomme. |
| 618 |
- More CMake build fixes thanks to David Callu (bug 290). |
| 619 |
- Use PROG_LIBS for output modules, to reinstate not necessarily proper but |
| 620 |
previous behaviour and fix FreeBSD port build (bug 291). |
| 621 |
- Refine LFS support in libsyn123, avoiding architecture-dependent syn123.h |
| 622 |
(debian bug 963205). |
| 623 |
|
| 624 |
1.26.1 |
| 625 |
------ |
| 626 |
- Fix cmake build by actually including the read_api_version file in the distro. |
| 627 |
- Fix big-endian build, stupid omission of a variable declaration, semicolon |
| 628 |
(bug 289). |
| 629 |
- Silence a harmless warning for build without realtime priority. |
| 630 |
|
| 631 |
1.26.0 |
| 632 |
------ |
| 633 |
|
| 634 |
- Starting to intentionally use C99 in the codebase. API headers are still |
| 635 |
supposed to be compatible to C89. |
| 636 |
- There is a make check target now with some simple tests. |
| 637 |
It is an open question how that should be developed in relation to the |
| 638 |
external regression and compliance test suite. |
| 639 |
- Finally silenced memory checkers about leaking memory from getlopt() |
| 640 |
(main code overwriting values without freeing strdup() strings). |
| 641 |
- AUTHORS now in UTF-8;-) |
| 642 |
- CMake build files in ports/cmake, as an alternative to create MSVC |
| 643 |
project files and the like (thanks to Vitaly Kirsanov) |
| 644 |
- Default build with proper integer rounding (--enable-int-quality) now. |
| 645 |
- Cygwin/midipix autoconf fixes (thanks to Redfoxmoon). |
| 646 |
- Updated Windows build script, notably renaming .dll.def to .def. |
| 647 |
Requires an argument now for build type, an optional one for |
| 648 |
parallel make (not that useful on MinGW). |
| 649 |
- Rework library dependency handling to avoid unnecessary linking for |
| 650 |
lib*123. Also add proper Libs.private to .pc files to enable static |
| 651 |
usage (especially on Windows with shlwapi). |
| 652 |
- Updated support for OS/2 in the form of ArcaOS. |
| 653 |
- Removed outdated Pascal port (ports/mpg123_.pas). There are others |
| 654 |
out there. |
| 655 |
- Updated man pages, been a while. |
| 656 |
- mpg123: |
| 657 |
-- Fixed-rate playback now prefers the libsyn123 resampler instead of NtoM |
| 658 |
in libmpg123, see --resample parameter. |
| 659 |
-- Drop --STDOUT (never properly implemented, use pipe to out123 instead). |
| 660 |
-- Make --streamdump use unintr_write() to avoid inconsistencies. |
| 661 |
-- Now sets non-zero exit code when any one track of the playlist |
| 662 |
fails to either produce at least one frame of playback, if there |
| 663 |
is data that should produce such (i.e. /dev/zero is bad, /dev/null is |
| 664 |
fine). See man page for details. |
| 665 |
-- Print out MPEG header info for each frame for mpg123 -vvvv. |
| 666 |
-- Added --no-visual to disable cursor/inverse video games explicitly. |
| 667 |
-- Clear progress bar before printing updated metadata within a stream. |
| 668 |
-- Filter control/non-printable characters from user data printout, reduce |
| 669 |
ID3v1 data to 7-bit ASCII (no way to know correct 8-bit encoding for sure). |
| 670 |
This should cover bug 267. |
| 671 |
-- Set MPG123_NO_PEEK_END when opening special file '-' (standard input). |
| 672 |
That helps Windows where attempting to seek on the non-seekable stream |
| 673 |
is undefined behaviour (bug 285). |
| 674 |
-- Print errors in player code also for --quiet operation (just no messages |
| 675 |
from the libraries). |
| 676 |
-- Ignore ID3v1 once a Frankenstein stream was detected. |
| 677 |
-- Prevent a cosmetic use-after-free in audio playback during program abortion just after |
| 678 |
starting playback (prebuffer still in use, implication a blip of bad sound and |
| 679 |
a complaining sanitizer). |
| 680 |
-- Reformat audio capabilities table, more condensed, fits into 80 columns. |
| 681 |
Forced rate on a separated line. |
| 682 |
-- Make --pitch actually work, not just interactive changes. Pitching uses |
| 683 |
a resampler now if a fixed output rate is specified. |
| 684 |
-- Added --no-frankenstein. |
| 685 |
-- Frameflags as long variable, 32 bits are needed since some time now. |
| 686 |
- out123: |
| 687 |
-- Document --STDOUT, make it more robust regarding fwrite() interruptions. |
| 688 |
-- Removed the implicit phase shift that made generated waves exactly at |
| 689 |
Nyquist freq non-silent, but made little sense overall. |
| 690 |
-- Less high-frequency shifts to make waves fit into the table (not insisting |
| 691 |
on even number of samples). |
| 692 |
-- Option to work without wave table (setting the limit to zero). |
| 693 |
-- Added --wave-direction to also enable backward time without phase shift. |
| 694 |
-- Waves now generated by re-usable little synthethizer library dubbed |
| 695 |
libsyn123. |
| 696 |
-- Pink noise from libsyn123 added (using code from Phil Burk). |
| 697 |
-- White noise from libsyn123. |
| 698 |
-- Geiger-Mueller counter simulation from libsyn123. |
| 699 |
-- Wave sweep generator from libsyn123. |
| 700 |
-- Some rearrangement in help text. |
| 701 |
-- Changed output of --test-encodings to list of encoding names |
| 702 |
instead of raw bitmask value. |
| 703 |
-- Added --endian, --inputend, and --byteswap. |
| 704 |
- libsyn123: |
| 705 |
-- Created the library to host some simple signal generators for testing |
| 706 |
output. |
| 707 |
-- It also hosts sample format conversions as a necessity to be able to |
| 708 |
directly produce the format output devices need. |
| 709 |
-- Well, also channel mixing while we're at it. |
| 710 |
-- Oh, and a minimal-latency-and-reasonably-efficient resampler that only |
| 711 |
took me over a year to figure out. I should write a paper about it. |
| 712 |
- libout123: |
| 713 |
-- Added out123_free() for the benefit of library wrappers. (bug 276) |
| 714 |
-- Removed change of effective user ID in the WAV/RAW/AU/CDR writer. |
| 715 |
This was intended as a safeguard to avoid creating files with root |
| 716 |
priviledges. But: Other output modules still allowed root-level |
| 717 |
access to various devices and files, so it was never safe to do |
| 718 |
something awful like installing mpg123 with suid bit or configure |
| 719 |
sudo to allow users to run mpg123 with arbitrary arguments. |
| 720 |
You should treat out123_open just like the regular open(): You can |
| 721 |
write to any file/device depending on your permissions. |
| 722 |
-- Finally maybe fixed the damaged playback when using pulse hidden |
| 723 |
behind the ALSA API (on Ubuntu, for example) by setting a high value |
| 724 |
for device start threshold. |
| 725 |
-- Fixed out_play() abortion logic to better detect fatal situations |
| 726 |
(broken pipe). Needed on FreeBSD, while Linux buffers the issue away. |
| 727 |
Should resolve bug 283. |
| 728 |
-- Limit size of buffer block being written in out123_play to 16K, avoiding |
| 729 |
unnecessary failure with ALSA at least. |
| 730 |
-- Using SDL2 now if found. Output module code unchanged. |
| 731 |
-- Added hex and txt (plain text) printout. |
| 732 |
-- Eliminated spots where error messages would still be printed |
| 733 |
also for OUT123_QUIET being effect. |
| 734 |
-- Dummy output accepts any encoding now. |
| 735 |
- libmpg123: |
| 736 |
-- Added mpg123_open_fixed() to ease API for applications that just |
| 737 |
want to decode well-behaved local files. |
| 738 |
-- The user buffers for audio output data are now declared as void* for |
| 739 |
mpg123_read(), mpg123_decode(), and mpg123_replace_buffer() to avoid |
| 740 |
the useless need for casting your nice int16_t buffer to unsigned char |
| 741 |
for decoding MPG123_ENC_SIGNED_16 data to it. |
| 742 |
-- Added mpg123_free() for the benefit of library wrappers. (bug 276) |
| 743 |
-- Add mpg123_format2() and mpg123_fmt2() supporting special value 0 for all |
| 744 |
rates. |
| 745 |
-- Fix changing of decoder (and output format along with that) after stream |
| 746 |
opening. This was never recommened and only now should work at all. |
| 747 |
-- Also mpg123_decode_frame() now sets return buffer to NULL and returned byte |
| 748 |
count to zero in case of MPG123_NEED_MORE (or any other early abort). |
| 749 |
-- MPG123_NEED_MORE not returned anymore for non-feeder streams. Got in |
| 750 |
there for generic partial frame body reads, but was only intended for |
| 751 |
feeder API. |
| 752 |
-- Added mpg123_set_moreinfo() to support the Lame project's frame analyzer, |
| 753 |
disabled by ./configure --disable-moreinfo. |
| 754 |
-- Added optional storage and retrieval of raw ID3 data. |
| 755 |
-- Fix skipping of ID3v2 footers (too much was attempted to be skipped). This |
| 756 |
is of not much practical consequence as a tag with footer would appear on |
| 757 |
the end of files anyway and files with ID3v2 tags at the end seem to be |
| 758 |
rather rare. |
| 759 |
-- Add mpg123_new_string() and mpg123_delete_string() to avoid confusion |
| 760 |
about what mpg123_init_string() and mpg123_free_string() do. |
| 761 |
-- Make mpg123_resize_string() terminate the string if shrinking (fill now |
| 762 |
limited to new size). |
| 763 |
-- Improve layer III frame parsing/error reporting for bad part2_3_length. |
| 764 |
-- Fix crashing on stupidly low NtoM rates (exceeding downsampling factor 31). |
| 765 |
This was only triggered by you specifying a forced sampling rate below 1550 Hz. |
| 766 |
-- Do not remove CRC bits twice from possibly available bit reservoir. |
| 767 |
This move needed recomputation of the layer3is reference data for 8 and |
| 768 |
24 kHz. Old mpg123 is _wrong_ in the first few frames. |
| 769 |
-- Generally more tight control and early bail out on reading bits of |
| 770 |
frame data for all layers. This reduces the count of error messages |
| 771 |
on badly damaged files a lot and feels a lot safer, too. Note that |
| 772 |
we already silently returned zero bytes instead of actually over-reading |
| 773 |
the frame buffer before, but now it happens with diagnostics and more |
| 774 |
checks before it may happen. |
| 775 |
-- Optionally enforce output endianess (big/little) away from native. |
| 776 |
-- Fix build without error messages. |
| 777 |
-- Fix build without gapless decoding. |
| 778 |
-- Disable buffer when neither mmap nor shm functions detected (fixes |
| 779 |
build for Android, thanks to vquicksilver). |
| 780 |
-- Some support for extremely small streams (below 128 bytes). Those are |
| 781 |
too short to contain anything useful besides some tiny metadata, but |
| 782 |
serve to find/reproduce parser bugs. |
| 783 |
-- Fix mpg123_read() for builds without feeder. It calls mpg123_decode() |
| 784 |
without feeding input, which was disabled by mistake. The use of |
| 785 |
mpg123_read() (instead of mpg123_decode_frame()) with mpg123_open() |
| 786 |
was broken in feederless builds since those were fixed in version 1.15. |
| 787 |
-- Fix ID3v2 parser logic for multiple ID3v2 tags being encountered in one |
| 788 |
stream. New tags replace old data instead of appending to it when the |
| 789 |
extended header update flag is not set (ID3v2.4). Update tags only |
| 790 |
replace data that shall be unique. So far, I have never seen an update |
| 791 |
tag in the wild, so the check for the flag is untested. The mechanism |
| 792 |
of replacing parts of existing tag data has been tested, though. |
| 793 |
Note that the updated libmpg123 also avoids a growing ID3 data structure |
| 794 |
when repeatedly seeking back to the beginning in a file with disabled |
| 795 |
seek index. |
| 796 |
-- Eliminated a spots where error messages would still be printed |
| 797 |
also for MPG123_QUIET being effect. |
| 798 |
-- Added MPG123_NO_FRANKENSTEIN, MPG123_FLOAT_FALLBACK flags. |
| 799 |
-- Now actually try floating point encoding if format matrix allows it |
| 800 |
(can be disabled by unsetting MPG123_FLOAT_FALLBACK). |
| 801 |
-- Added mpg123_feature2() that takes an int, as enums are not ABI-safe, |
| 802 |
also added feature queries for floating point output. |
| 803 |
|
| 804 |
1.25.13 |
| 805 |
------- |
| 806 |
|
| 807 |
This is a bugfix release solely for bug 280 in the parser: |
| 808 |
|
| 809 |
- libmpg123 |
| 810 |
-- Reset the flag for having a frame to decode before trying to |
| 811 |
parse a new one. This prevents very unkind behaviour (crashes) |
| 812 |
when combinging mpg123_scan() with decoding later on for damaged |
| 813 |
streams that have a mixture of different MPEG versions. |
| 814 |
|
| 815 |
1.25.12 |
| 816 |
------- |
| 817 |
|
| 818 |
More credit to OSS-Fuzz. The ID3v2 parser code is not yet as hardened |
| 819 |
as the actual MPEG decoder. The paranoid can disable it at build-time. |
| 820 |
If you do not need it, this is a good idea, anyway: Code that is not |
| 821 |
there, cannot be exploited. Speaking about exploits: The recent crop |
| 822 |
of bugs trigger a denial of service (crash) worst-case, some invalid |
| 823 |
ID3 data normally. Code injection maybe not totally ruled out (that one |
| 824 |
write of a zero byte?), but does not seem easy. Update to be sure that |
| 825 |
you are only suceptible to as of yet hidden bugs. |
| 826 |
|
| 827 |
- libmpg123 |
| 828 |
-- Fix an out-of-bounds read of maximal two bytes for truncated RVA2 frames |
| 829 |
(oss-fuzz-bug 15975). The earlier fix around the same location needed |
| 830 |
one thought more. Actually, another though was needed, oss-fuzz-bug 16009 |
| 831 |
documents the incomplete fix. |
| 832 |
-- Fix an invalid write of one zero byte for empty ID3v2 frames that demand |
| 833 |
de-unsyncing (oss-fuzz-bug 16050). |
| 834 |
-- Correct preprocessor syntax in mangle.h, no #error in a #define line. |
| 835 |
(bug 273, thanks to nmlgc). |
| 836 |
- Fix dynamic build with gcc -fsanitize=address (check for all dl functions |
| 837 |
before deciding that separate -ldl is not needed). |
| 838 |
|
| 839 |
1.25.11 |
| 840 |
------- |
| 841 |
|
| 842 |
So, here is a number of bugs found by OSS-Fuzz. Credit to OSS-Fuzz |
| 843 |
for the bunch, then. |
| 844 |
|
| 845 |
- libmpg123: |
| 846 |
-- Fix out-of-bounds reads in ID3 parser for unsynced frames. |
| 847 |
(oss-fuzz-bug 15852) |
| 848 |
-- Fix out-of-bounds read for RVA2 frames with non-delimited identifier. |
| 849 |
(oss-fuzz-bug 15852) |
| 850 |
-- Fix implementation-defined parsing of RVA2 values. (oss-fuzz-bug 15862) |
| 851 |
-- Fix undefined parsing of APE header for skipping. Also prevent |
| 852 |
endless loop on premature end of supposed APE header. (oss-fuzz-bug 15864) |
| 853 |
|
| 854 |
1.25.10 |
| 855 |
------- |
| 856 |
|
| 857 |
- libout123: Fix error messages beginning from OUT123_ARG_ERROR (bug 261). |
| 858 |
|
| 859 |
1.25.9 |
| 860 |
------ |
| 861 |
- mpg123: Fix --icy-interval handling to work with stream from stdin. |
| 862 |
(curl | mpg123 --icy-interval=n -) |
| 863 |
- libmpg123: Fix another invalid read and segfault on damaged (fuzzed) |
| 864 |
files with part2_3_length == 0 (set maxband=1, pulled from upcoming 1.26.0). |
| 865 |
|
| 866 |
1.25.8 |
| 867 |
------ |
| 868 |
- mpg123: |
| 869 |
-- Also disable cursor/video games for empty TERM (not just unset and dumb). |
| 870 |
- libmpg123: |
| 871 |
-- Accept changing mode extension bits when looking for next header for |
| 872 |
detecting free-format streams (bug 257). |
| 873 |
-- Fix compute_bpf() for free format streams (needed to estimate track |
| 874 |
length and working fuzzy seeking in absence of an Info tag). |
| 875 |
|
| 876 |
1.25.7 |
| 877 |
------ |
| 878 |
- mpg123: |
| 879 |
-- Do not play with cursor and inverse video for progress bar |
| 880 |
when TERM=dumb. |
| 881 |
-- Fix parsing of host port for numerical IPv6 addresses (just did |
| 882 |
not work before, only for textual host names). |
| 883 |
- libmpg123: |
| 884 |
-- Proper fix for the xrpnt overflow problems by correctly |
| 885 |
initialising certain tables for MPEG 2.x layer III. The checks that |
| 886 |
catch the resulting overflow are still in place, but likely superfluous |
| 887 |
now. Note that this means certain valid files would have been misdecoded |
| 888 |
before, if anyone actually produced them. Thanks to Robert Hegemann for |
| 889 |
the fix! |
| 890 |
-- Silently handle granules with part2_3_length == 0, but |
| 891 |
scalefac_compress != 0 (ignore the latter). |
| 892 |
|
| 893 |
1.25.6 |
| 894 |
------ |
| 895 |
- Hotfix for bug 255: Overflow reading frame data bits in layer II decoding. |
| 896 |
Now, all-zero data is returned if the frame data is exhausted. This might |
| 897 |
have a slight impact on performance, but not easily measurable so far. |
| 898 |
|
| 899 |
1.25.5 |
| 900 |
------ |
| 901 |
- Avoid another buffer read overflow in the ID3 parser on 32 bit platforms |
| 902 |
(bug 254). |
| 903 |
|
| 904 |
1.25.4 |
| 905 |
------ |
| 906 |
- Better configure checks for i?86-apple-darwin (bug 253). |
| 907 |
- libmpg123: |
| 908 |
-- Prevent harmless call to memcpy(NULL, NULL, 0). |
| 909 |
-- More early checking of ID3v2 encoding values to avoid bogus text being |
| 910 |
stored. |
| 911 |
|
| 912 |
1.25.3 |
| 913 |
------ |
| 914 |
- libmpg123: |
| 915 |
-- Better checks for xrpnt overflow in III_dequantize_sample() before each |
| 916 |
use, avoiding false positives and catching cases that were rendered |
| 917 |
harmless by alignment-enlarged buffers. |
| 918 |
|
| 919 |
1.25.2 |
| 920 |
------ |
| 921 |
- libmpg123: |
| 922 |
-- Extend pow tables for layer III to properly handle files with i-stereo and |
| 923 |
5-bit scalefactors. Never observed them for real, just as fuzzed input to |
| 924 |
trigger the read overflow. Note: This one goes on record as CVE-2017-11126, |
| 925 |
calling remote denial of service. While the accesses are out of bounds for |
| 926 |
the pow tables, they still are safely within libmpg123's memory (other |
| 927 |
static tables). Just wrong values are used for computation, no actual crash |
| 928 |
unless you use something like GCC's AddressSanitizer, nor any information |
| 929 |
disclosure. |
| 930 |
-- Avoid left-shifts of negative integers in layer I decoding. |
| 931 |
|
| 932 |
1.25.1: Hot Fuzz |
| 933 |
------- |
| 934 |
- libmpg123: |
| 935 |
-- Avoid memset(NULL, 0, 0) to calm down the paranoid. |
| 936 |
-- Fix bug 252, invalid read of size 1 in ID3v2 parser due to forgotten |
| 937 |
offset from the frame flag bytes (unnoticed in practice for a long |
| 938 |
time). Fuzzers are in the house again. This one got CVE-2017-10683. |
| 939 |
-- Avoid a mostly harmless conditional jump depending on uninitialised |
| 940 |
fr->lay in compute_bpf() (mpg123_position()) when track is not ready yet. |
| 941 |
-- Fix undefined shifts on signed long mask in layer3.c (worked in practice, |
| 942 |
never right in theory). Code might be a bit faster now, even. |
| 943 |
Thanks to Agostino Sarubbo for reporting. |
| 944 |
|
| 945 |
1.25.0: MP3 now patent-free worldwide! |
| 946 |
------- |
| 947 |
- Silence test for artsc-config if it is not there. |
| 948 |
- Make sure -static-libgcc from LDFLAGS gets through libtool, |
| 949 |
fixing 32 bit Windows builds (depend on libgcc DLL otherwise). |
| 950 |
- Fix build with non-GNU make by using plain rm -f instead of silly $(RM) |
| 951 |
in libout123/modules makefile fragment. |
| 952 |
- Make build work on iOS, including coreaudio backend. |
| 953 |
- libmpg123: |
| 954 |
-- Finally provide position-independent code for x86 with assembly |
| 955 |
optimisations.The textrels are gone thanks to Won Kyu Park and Taihei Momma. |
| 956 |
-- Clarify some license language in files descending from the original MMX |
| 957 |
optimisation. |
| 958 |
-- Fix return value overflow check for MPG123_BUFFERFILL. |
| 959 |
-- Introduced mpg123_getformat2() to enable the FORMAT command |
| 960 |
for the generic control not stealing MPG123_NEW_FORMAT from the main |
| 961 |
playback loop. The sequence LOADPAUSED-FORMAT-PAUSE (play) is supposed |
| 962 |
to work now. |
| 963 |
-- Enable aarch64 optimisations on *BSD by default, too. You can always |
| 964 |
override that stupid OS whitelist using --with-optimization, anyway. |
| 965 |
-- Use of the i486 decoder is now discouraged more prominently, in configure |
| 966 |
output. |
| 967 |
- out123: Fix stupid crash with verbose mode and tone generation (print |
| 968 |
the string if the pointer is non-null, not if it is null). |
| 969 |
- libout123: More consistent error messages for dynamic and legacy |
| 970 |
(built-in) modules. Namely, you get a hint how if you choose a different |
| 971 |
module than the built-in ones for a static libout123. |
| 972 |
|
| 973 |
1.24.0: |
| 974 |
------- |
| 975 |
- Avoid repeating genre in metadata printout for specifications like |
| 976 |
(144)Thrash Metal. |
| 977 |
- In remote control mode, only enforce --quiet if no verbosity was required. |
| 978 |
- Prevent --loop and --shuffle or --random from messing with the remote |
| 979 |
control LOADLIST command (printout of the list would loop without reason). |
| 980 |
- Fix the mpg123 command (esp. our provided binaries on Windows) to now find |
| 981 |
modules again relative to the executable directory, not the current working |
| 982 |
directory. This was a regression in 1.23 and might be security-relevant if |
| 983 |
you called mpg123 in working directories with untrusted content. |
| 984 |
Note that mpg123 1.23 looked for modules relative to the current working |
| 985 |
directory only if the installation prefix for modules did not exist. |
| 986 |
So, usage on an intact installation (with /usr/lib/mpg123 or the like) was |
| 987 |
safe. Nevertheless this new version fixes the search to be relative to the |
| 988 |
binary path as it was with 1.22 and before. |
| 989 |
- At least consistent behaviour of playlist code in the face of looping. |
| 990 |
Looping is about individual tracks, always. They are looped also in random |
| 991 |
mode. Jumping (prev/next keys) is between tracks and resets the loop counter. |
| 992 |
The display of currently playing track in the playlist is fixed for random |
| 993 |
and looped play now (bug 198). |
| 994 |
- Looping is now mentioned for a to-be-repeated track with --verbose. |
| 995 |
- Move some compiler nagging from --enable-debug to --enable-nagging, fix up |
| 996 |
some new build failures by adding some pesky feature test macros. |
| 997 |
- Try not to pollute the terminal buffer with old progress bars in inverse |
| 998 |
video. Only the currently live one shall be seen. That one is pretty. The |
| 999 |
others are not. |
| 1000 |
- Using plain dlopen()/LoadLibrary() for opening modules instead of libltdl. |
| 1001 |
This also means that --with-module-suffix is gone in configure. |
| 1002 |
- Windows builds only work when Unicode support is there (older than Windows |
| 1003 |
2000/XP will definitely not work anymore). |
| 1004 |
- The out123 tool now features tone generation, with a mix of differing |
| 1005 |
wave patterns. Makes sense to be able to test the audio output by itself, |
| 1006 |
and it's fun. See --wave-freq and related parameters. |
| 1007 |
- libmpg123 version 43: |
| 1008 |
-- Add flags MPG123_NO_PEEK_END and MPG123_FORCE_SEEKABLE, as suggested |
| 1009 |
by Bent Bisballe Nyeng. |
| 1010 |
-- Build fix for MSVC (consistent definition of ssize_t, spotted by manx, |
| 1011 |
bug 243). |
| 1012 |
-- Build fix for --with-cpu=ppc_nofpu (thanks to Michael Kostylev, bug 244). |
| 1013 |
-- Add asm optimized MSVC++ Win32|x64 and UWP|x64 builds |
| 1014 |
-- Remove old, broken MSVC++ builds |
| 1015 |
- libout123 version 2: |
| 1016 |
-- Added OUT123_BINDIR. |
| 1017 |
-- New search order for output plugin directory: MPG123_MODDIR, or (relative |
| 1018 |
to executable directory OUT123_BINDIR) ../lib/mpg123, plugins |
| 1019 |
libout123/modules/.libs, libout123/modules, ../libout123/modules/.libs, |
| 1020 |
../libout123/modules, and at last the installation prefix $libdir/mpg213/. |
| 1021 |
This shall ensure that a build inside a source tree does not try to use old |
| 1022 |
modules from the system prefix. The normal libtool wrapper deals with the |
| 1023 |
shared libout123 or libmpg123 only, not modules. |
| 1024 |
Note that if you set MPG123_MODDIR to a non-existing directory, no modules |
| 1025 |
will be found (earlier versions fell back to other choices). |
| 1026 |
-- The OUT123_NAME parameter is now copied by out123_param_from(), as is |
| 1027 |
the newly added OUT123_BINDIR. |
| 1028 |
-- Coreaudio: Use AudioComponents API on OSX >= 10.6 (thanks to Michael Weiser). |
| 1029 |
-- Coreaudio: Fix behaviour of out123_drop(), not killing the output anymore |
| 1030 |
without re-opening the device (bug 236, thanks to Taihei for the fix). |
| 1031 |
|
| 1032 |
1.23.8 |
| 1033 |
------ |
| 1034 |
- Fix long-standing bad memory read (via integer underflow) in ID3 parser |
| 1035 |
for crafted ID3v2 tags with tiny size information (bug 240). Thanks to |
| 1036 |
Han Lee & Jerold Hoong for the detailed report. |
| 1037 |
|
| 1038 |
1.23.7 |
| 1039 |
------ |
| 1040 |
- Fix the bad RPM spec file (broken since out123 addition, thanks |
| 1041 |
to Srikanth Rao for noticing). |
| 1042 |
- More out123_pause() in generic control mode, working around |
| 1043 |
bug 236. The coreaudio output needs to be more robust, though. |
| 1044 |
- Do not undef MPG123_EXPORT in the headers, rather be prepared for it |
| 1045 |
being defined already. This fixes MSVC builds, broken since 1.23.0 |
| 1046 |
(bug 239). |
| 1047 |
|
| 1048 |
1.23.6 |
| 1049 |
------ |
| 1050 |
- call out123_pause() instead of out123_stop() in remote control STOP |
| 1051 |
command, fixing the regression in 1.23.x of not being able to resume |
| 1052 |
playback with another LOAD unless the new track has differing audio |
| 1053 |
format (bug 234) |
| 1054 |
|
| 1055 |
1.23.5 |
| 1056 |
------ |
| 1057 |
- libout123: |
| 1058 |
-- fix build of portaudio and SDL on win32 (too many parentheses, |
| 1059 |
thanks to Sandro Cumerlato for pointing it out) |
| 1060 |
-- make out123_errcode() return OUT123_BAD_HANDLE as documented |
| 1061 |
(adding that value to the error enum, was documented but missing), |
| 1062 |
again thanks to Sandro |
| 1063 |
- fix windows-builds.sh (shell quoting in copying stage) and add some |
| 1064 |
bits to shipped header to make it directly usable in MSVC (define ssize_t, |
| 1065 |
bug 232) |
| 1066 |
- no overwriting of LIBS in Makefile (build system regression in 1.23, |
| 1067 |
thanks to Peter Korsgaard for reporting that one) |
| 1068 |
- no printing of message in response to SIGPIPE, as that could trigger |
| 1069 |
a hang if stderr itself is the piped culprit (regression from 1.22, bug 233) |
| 1070 |
|
| 1071 |
1.23.4 |
| 1072 |
------ |
| 1073 |
- mpg123: Fix logic of prebuffering small bits for glitch-free start of |
| 1074 |
playback. The logic as introduced in 1.23.0 actually introduced stuttering! |
| 1075 |
The fix for this is really minimal and I urge everyone to at least include |
| 1076 |
that one. It is the changeset of rev. 4041. |
| 1077 |
- libout123: |
| 1078 |
-- Actually make OUT123_KEEP_PLAYING on by default, as documented. |
| 1079 |
-- Fix buffer logic with regard to draining, use common device writing |
| 1080 |
code to handle resuming from pause. This fixes sdl output with buffer, |
| 1081 |
possibly other sfifo-based outputs like CoreAudio (those were poorly |
| 1082 |
tested with buffer, as the combination is indeed unusual, see bug 230). |
| 1083 |
-- Buffer pauses devices for prebuffering, to avoid underruns. |
| 1084 |
-- More reliable playback with SDL, Portaudio and CoreAudio outputs. |
| 1085 |
This includes FIFO draining on close to avoid dropping of the end. |
| 1086 |
It should fix parts of bug 230. |
| 1087 |
-- Fixed memory leaks with some outputs where a call to the deinit() |
| 1088 |
function is necessary during available/working module checking. |
| 1089 |
- mpg123, out123: Use the default output flags to get OUT123_KEEP_PLAYING. |
| 1090 |
Without this, there is a good chance to abort on SIGSTOP/CONT while playing. |
| 1091 |
This is a regression from 1.22 . |
| 1092 |
- Build fixes (bugs 227 and 228) and some build system hackery. |
| 1093 |
Gone are libc feature test macros in compat.h . This means always |
| 1094 |
using our own strdup() implementation. Simpler than being bugged by |
| 1095 |
feature test macros in strict compiler mode (when _DEFAULT_SOURCE is not |
| 1096 |
defined). |
| 1097 |
- ./configure --enable-nagging does something also without --enable-debug, |
| 1098 |
explictly triggers -std=c89, too (hence the above). |
| 1099 |
- Some fixup to make things work in pedantic C89 mode again. |
| 1100 |
It really might be time to swich on some serious C99 for the next release, |
| 1101 |
since there's a followup standard to _that_ which we can ignore now. |
| 1102 |
- Update list of renamed internal symbols to reduce conflicts during static |
| 1103 |
linking of libmpg123 or libout123. |
| 1104 |
- Internal compatibility functions now handled via libtool convenience |
| 1105 |
archives, avoiding the hackish code copies. |
| 1106 |
|
| 1107 |
1.23.3: |
| 1108 |
------- |
| 1109 |
- mpg123: Man page fixes by ESR. |
| 1110 |
- Actually check for sys/select.h (again?) in configure so that it is used. |
| 1111 |
Fixes build on a Cygwin install, at least. |
| 1112 |
- libmpg123: Always default to enabled IEEE 754 hack for rounding on all |
| 1113 |
platforms, use ./configure --disable-ieeefloat if you do not want it. |
| 1114 |
As a protection for the exotic machine that does not use IEEE floating |
| 1115 |
point storage format, mpg123_init() will error out early if the rounding |
| 1116 |
does not work out. |
| 1117 |
|
| 1118 |
1.23.2: |
| 1119 |
------- |
| 1120 |
- mpg123: Fix compact ID3 tag printing to take UTF-8 character count |
| 1121 |
into account again (thoughtless regression in 1.23.0). |
| 1122 |
|
| 1123 |
1.23.1: |
| 1124 |
------- |
| 1125 |
- libout123: |
| 1126 |
-- Fix logic to prevent cases of output devices being closed more than once |
| 1127 |
(stop after pausing triggered multiple close calls, which broke sndio, for |
| 1128 |
example). |
| 1129 |
-- Fix JACK output handling of port wishlist, was simply broken for more than |
| 1130 |
two ports (-o jack -a port1,port2,port3). Now, it is ensured that each |
| 1131 |
output ports gets some connection to an out123 channel, possibly splitting |
| 1132 |
one to multiple ports or mixing multiple channels into one port (cyclic |
| 1133 |
connection scheme). Note that this does only apply for an explicitly given |
| 1134 |
list of ports. You can still use --stereo to ensure that two output ports |
| 1135 |
(if found) are used also for mono tracks. |
| 1136 |
-- Also use jack_free() in JACK output for ports list. |
| 1137 |
-- And finally, ensure that pthread library is linked to JACK module (would need |
| 1138 |
hacking to work on non-POSIX, replacing sem_t with equivalent). |
| 1139 |
|
| 1140 |
- mpg123: |
| 1141 |
-- Hide networking-related command-line parameters when disabled. |
| 1142 |
|
| 1143 |
1.23.0: |
| 1144 |
------- |
| 1145 |
- libmpg123 version 42 |
| 1146 |
-- This adds mpg123_framelength() and makes mpg123_position() truly obsolete. |
| 1147 |
-- Equalizer optional now (./configure --disable-equalizer) to save precious |
| 1148 |
memory |
| 1149 |
-- Clip decode tables for large amplification with fixed-point decoders. |
| 1150 |
Without that, high-pitched distortion enters really quickly when |
| 1151 |
trying to increase volume even if output samples would not be clipped, |
| 1152 |
weren't it for fixed-point math. |
| 1153 |
- libout123 version 1: First incarnation of libout123, a basic library to |
| 1154 |
get audio data written to audio devices (or files) in simple blocking |
| 1155 |
manner as opposed to callback APIs (which it wraps over). This collects |
| 1156 |
the output modules of mpg123 and makes them available to the wider |
| 1157 |
masses. Also, the separate shared memory buffer process (contained |
| 1158 |
in libout123) got a lot of reworking which should be noticable in the |
| 1159 |
interaction with terminal control. |
| 1160 |
-- Some tuning of several output drivers (modules) regarding flexible |
| 1161 |
buffer size, client names, supported formats. |
| 1162 |
-- Notably the JACK output got a major overhaul and now does not swallow |
| 1163 |
audio at the end anymore. Huge latency also reduced and tunable. Encoding |
| 1164 |
fixed to floating point, so that libmpg123 actually chooses what is |
| 1165 |
sensible. |
| 1166 |
- Added mpg123 --no-infoframe. |
| 1167 |
- Detect terminal on input side and enable control keys automatically. |
| 1168 |
There is --no-control now to disable terminal control anyway. |
| 1169 |
- Display stuff: |
| 1170 |
-- Avoid spillover of status line that caused unwanted terminal scrolling. |
| 1171 |
If the terminal width is smaller than the full status string, a cut is |
| 1172 |
made to make it fit. |
| 1173 |
-- Draw a progress bar on the terminal by inversing colors behind status |
| 1174 |
line. |
| 1175 |
-- Rework the format of the status line to be more compact and consistent. |
| 1176 |
-- Rework smart tag printout for adapting to terminal width. |
| 1177 |
-- Warning messages also start with a line break now to better fit in with |
| 1178 |
verbose playback. |
| 1179 |
-- Doubly-verbose mode now needed for long MPEG header print out. |
| 1180 |
It is a higher level of verbosity than printing the current position. |
| 1181 |
The compact header is a better fit. |
| 1182 |
-- Compact header printout also compacted, example: |
| 1183 |
MPEG 1.0 L III cbr128 44100 j-s |
| 1184 |
-- Reporting of clipped samples also includes a line break now. |
| 1185 |
-- Keep ID3v2 data around for terminal control to be able to print on |
| 1186 |
demand. That was broken for some time. |
| 1187 |
- Default for --preload now is 0.2 instead of 1 (fill whole buffer before |
| 1188 |
playback). The maximum is 0.5 . This is mandated by corrected buffer |
| 1189 |
interaction in libout123. |
| 1190 |
- Improved interaction with buffer process in terminal control mode. |
| 1191 |
Seeking is more transparent now, taking dropped samples from buffer into |
| 1192 |
account to avoid unintended jumps. Direct seeks with number row do not |
| 1193 |
pause playback anymore. |
| 1194 |
- Silently skip APE tags (thanks to Hans de Goede). |
| 1195 |
- Some reduction in bitrot on AIX (typos in output module, build with |
| 1196 |
--disable-largefile --with-audio=aix, real test welcome). |
| 1197 |
- Added '[' and ']' keys to skip to previous/next directory in playlist. |
| 1198 |
- Added support for Haiku to configure script (thanks to Jerome Duval). |
| 1199 |
- Remove spurious Frankenstein warning when scanning files that have no |
| 1200 |
gapless info (the reported value of -1152 gapless sample length should be |
| 1201 |
a giveaway anyway). |
| 1202 |
- Fix a bug in the command line parser that was present from the beginning, |
| 1203 |
apparently, causing certain parameters (--au, --cdr) to kill off parsing |
| 1204 |
of following ones. Nobody complained in all these years. Astounding. |
| 1205 |
- Forget content type from HTTP redirects (relate to error pages, not the |
| 1206 |
stream redirected to), fixes web radio streams that do not send any |
| 1207 |
content type for the actual stream. |
| 1208 |
- Accept application/pls+xml for PLS playlists. It happens. Don't ask |
| 1209 |
mpg123 to actually parse any XML! |
| 1210 |
- Ignore whitespace after HTTP MIME types (esp. before a ";"). |
| 1211 |
- Added --name to mpg123 and out123 for providing client name p.ex. for JACK. |
| 1212 |
There is no default of appending the PID to "mpg123" as client name anymore, |
| 1213 |
just plain "mpg123" or "out123". |
| 1214 |
- Added --devbuffer to mpg123 and out123 for influencing device buffer and |
| 1215 |
possible latency a bit (perhaps more so in future when drivers are adapted |
| 1216 |
to pay more attention to that). |
| 1217 |
- Added out123 --channels <n>, --list-encodings, --test-format, |
| 1218 |
--test-encodings, --query-format. |
| 1219 |
- Calling ./configure --enable-nagging does not include --enable-debug anymore, |
| 1220 |
you specify that separately. |
| 1221 |
- Fix for newer glibc that wants higher POSIX feature test for getaddrinfo() |
| 1222 |
stuff. |
| 1223 |
|
| 1224 |
1.22.4: |
| 1225 |
------- |
| 1226 |
- Fix stupid regression introduced with a bugfix in 1.14.1 to make |
| 1227 |
free format streams work again. It took 3 years for someone to notice. |
| 1228 |
I added a regression test for that now! |
| 1229 |
|
| 1230 |
1.22.3: |
| 1231 |
------- |
| 1232 |
- Fix UTF-16 surrogate detection because that used to falsely detect |
| 1233 |
characters above 0xDFFF as surrogates (bug 216). |
| 1234 |
|
| 1235 |
1.22.2: |
| 1236 |
------- |
| 1237 |
- Fix buffering for funny sample formats (namely, 24 bit), that do not |
| 1238 |
fit nicely into 32768 bytes. Effect was a nasty endless loop where |
| 1239 |
mpg123 needs to be externally killed. |
| 1240 |
|
| 1241 |
1.22.1: |
| 1242 |
------- |
| 1243 |
- Fix mpg123-id3dump when writing images with funny (manipulated) MIME type. |
| 1244 |
Stupid mistake in length computation of the fallback file extension caused |
| 1245 |
junk from memory being appended to the filename if the pointer size |
| 1246 |
is less than 64 bit. For 64 bit pointers (or longer) it was correct by |
| 1247 |
accident. |
| 1248 |
- Fix pedantic build by cleaning up out123 source, also now really showing |
| 1249 |
the encoding list in --longhelp instead of possibly, again, writing junk |
| 1250 |
from memory in there. |
| 1251 |
- Not linking libmpg123 against libltdl anymore (bug 215). |
| 1252 |
- Update MSVC++ ports a bit to make them work again. |
| 1253 |
|
| 1254 |
1.22.0: |
| 1255 |
------- |
| 1256 |
- libmpg123 version 41 |
| 1257 |
- Build fix: Avoid name clash on OSX SDK with "normal" being defined in |
| 1258 |
an enum already. |
| 1259 |
- More resilience against folks who do not check errors and rather pass |
| 1260 |
NULL pointers around (see NEWS.libmpg123). |
| 1261 |
This changes some return values to MPG123_BAD_HANDLE instead of MPG123_ERR |
| 1262 |
(always check for != MPG123_OK). |
| 1263 |
- Fix WAV writing to stdout on Windows (bug 214). |
| 1264 |
- Rework Xing/Info/Lame tag parsing, also detecting short ones without |
| 1265 |
the TOC now. |
| 1266 |
In addition, the warning about file size being off is a _lot_ more |
| 1267 |
accurate now. |
| 1268 |
|
| 1269 |
1.21.0: |
| 1270 |
------- |
| 1271 |
- Use LL as shortcut for LOADLIST remote command, L is taken already (bug 210). |
| 1272 |
- Less namespace pollution (MPG123_EXPORT in header instead of EXPORT, bug 212). |
| 1273 |
|
| 1274 |
1.20.1: |
| 1275 |
------- |
| 1276 |
- Make feed reader more efficient when skipping junk by early discarding |
| 1277 |
of data from buffers to avoid re-parsing. |
| 1278 |
|
| 1279 |
1.20.0: |
| 1280 |
------- |
| 1281 |
- Added NEON optimized decoder for AArch64 (ARM 64bit environment) |
| 1282 |
-- enabled for --with-cpu=neon64 (NEON only) or --with-cpu=aarch64 (runtime |
| 1283 |
switch between neon and generic_fpu, like arm_fpu) configuration |
| 1284 |
-- compatible with aarch64-linux-gnu toolchains (from Ubuntu, debian) |
| 1285 |
and Xcode 5 |
| 1286 |
- Added new binary out123 only with the audio output part of mpg123. |
| 1287 |
This is a precursor to separating out said code into a simple audio |
| 1288 |
output library. It also allows plugging in some processing in a pipe |
| 1289 |
before feeding to output. |
| 1290 |
- Prevent opendir(NULL) for unknown module directory when listing modules. |
| 1291 |
- some build fixes, among those fixing mpg123-id3dump on Windows |
| 1292 |
|
| 1293 |
1.19.0: |
| 1294 |
------- |
| 1295 |
- libmpg123 version 40 |
| 1296 |
- Support float and 32/24 bit integer output also with fixed-point decoders |
| 1297 |
(conversion from 16 bit precision). |
| 1298 |
- A-Law output encoding is actually implemented now (Michael introduced |
| 1299 |
the encoding back in the old days without ever implementing theconversion |
| 1300 |
table, apparently). |
| 1301 |
- Added --with-cpu=arm_fpu as decoder choice for runtime switch between |
| 1302 |
plain fpu code and NEON. |
| 1303 |
- Fix ARM builds to work properly on debian systems without special CFLAGS |
| 1304 |
(NEON decoder, specifically). |
| 1305 |
- Make scripts/benchmark-cpu.pl check the return value instead of delivering |
| 1306 |
crazy timings for crashed mpg123. |
| 1307 |
- Trigger track initialization in mpg123_info() to avoid use of uninitialized |
| 1308 |
variables (watch out for MPG123_NEED_MORE return value!). |
| 1309 |
- Fix integer code to 32 bit numbers where it would waste 64 bit on |
| 1310 |
modern systems. |
| 1311 |
- Add non-executable stack marking also to ARM assembly. |
| 1312 |
|
| 1313 |
1.18.1: |
| 1314 |
------- |
| 1315 |
- Do not close buffer twice with mpg123 -R (delete outdated code in |
| 1316 |
control_generic(), fixing bug 207. |
| 1317 |
- Do not mess around with first command line argument to extract program |
| 1318 |
name, use a copy instead, fixing bug 205. |
| 1319 |
- Prevent premature exit on timing of failure to open a track in the |
| 1320 |
playlist and the user wanting to skip over it (bug 206). |
| 1321 |
- Fixup of HTTP socket mess, also avoiding unnecessary FILE objects (bug |
| 1322 |
204, patch by Rajeev V. Pillai). |
| 1323 |
- Fix playlist behaviour on slow HTTP streams, jumping back ('d' key) |
| 1324 |
from first track stays at first track (thanks to Rajeev again, sub-bug of |
| 1325 |
bug 206). |
| 1326 |
- Fix Frankenstein check not to stumble over ID3v1 tags. My apologies. As |
| 1327 |
a bonus, the position of the concerned code in the parser is now far |
| 1328 |
more logical. |
| 1329 |
|
| 1330 |
1.18.0: |
| 1331 |
------- |
| 1332 |
- libmpg123 version 39 |
| 1333 |
- Big version increase for clear distinction regarding the 1.14.x regression |
| 1334 |
fixes in libmpg123. |
| 1335 |
- Regression fix: Ensure decoder reinitialization on combination of seek |
| 1336 |
and resync (buffer overflow bug 201, introduced in 1.14.1). |
| 1337 |
- Regression fix: Make parsing really end on reaching of junk limit |
| 1338 |
(introduced in 1.14.4). |
| 1339 |
- Add check for bad bit allocation value in layer I decoder (removes |
| 1340 |
audible glitch in bug 201 test file). |
| 1341 |
- Avoid wrong error message about Frankenstein streams when gapless |
| 1342 |
decoding disabled. |
| 1343 |
- Be verbose about big header changes (Frankenstein streams). Note that |
| 1344 |
changes in samples per frame will confuse the seeking code, but decoding |
| 1345 |
can get through. |
| 1346 |
- Actually use the full routine to close tracks. Avoids socket leak when |
| 1347 |
playing multiple HTTP streams from a playlist (bug 203). |
| 1348 |
- Send correct host header when connecting through HTTP proxy (bug 202, |
| 1349 |
figured out by Rajeev V. Pillai). |
| 1350 |
- The console application now informs about changed major stream properties |
| 1351 |
(prints out another header line). |
| 1352 |
|
| 1353 |
1.17.0: |
| 1354 |
------- |
| 1355 |
- mpg123-id3dump --no-scan; for speedup |
| 1356 |
- hide -C parameter from mpg123 --help when it is not supported |
| 1357 |
- added tinyalsa Output (by Jarno Lehtinen) |
| 1358 |
- build system tweaking |
| 1359 |
- some care for fixing Cygwin builds |
| 1360 |
|
| 1361 |
1.16.0: |
| 1362 |
------- |
| 1363 |
- Taihei strikes again: |
| 1364 |
-- New Huffman decoding scheme (configurable, on by default) brings nice |
| 1365 |
boost to mpg123 to make it the fastest decoder on modern CPUs again. |
| 1366 |
-- new AVX decoder |
| 1367 |
-- assembly-optimized DCT36 for SSE and AVX |
| 1368 |
- added configs for vintage 3DNow(ext) CPUs (AMD K6) utilizing assembly DCT36 |
| 1369 |
- added configs for vintage SSE CPUs (Pentium M), utilizing C DCT36 |
| 1370 |
- added FORMAT command to generic control |
| 1371 |
- added support for ID3v2 APIC frames |
| 1372 |
- added mpg123-id3dump as official companion to extract meta data |
| 1373 |
(including writing of album art from APIC to files) |
| 1374 |
- added mpg123-strip as official companion to strip dirt out of MPEG streams |
| 1375 |
(including meta data) |
| 1376 |
- not deleting ID3 data right after printing in generic control |
| 1377 |
- module loader a bit more flexible with relative MPG123_MODDIR |
| 1378 |
- Fix chopped-off playback with pulseaudio output: draining the output |
| 1379 |
now on closing. |
| 1380 |
- SDL output fixup, a) not chopping off end and b) non-fatal underrun |
| 1381 |
- Fix obvious errors in win32 output ... does it now play the end of |
| 1382 |
tracks? Need someone to test this. |
| 1383 |
- added support for screen and iris-ansi terminals with --title (as prompted |
| 1384 |
by patch from sf.net user canavan) |
| 1385 |
- fixes/enhancements for sgi audio output |
| 1386 |
- libmpg123: proper largefile aliases for proper systems (FreeBSD with |
| 1387 |
one one-and-only off_t |
| 1388 |
This enables client software that insists on defining pointless |
| 1389 |
_FILE_OFFSET_BITS. |
| 1390 |
- wrapper script src/mpg123-with-modules to ease the pain of running mpg123 |
| 1391 |
with modules without installation (setting MPG123_MODDIR) |
| 1392 |
- removed ALSA 0.5 code (unused for longtime, last GPL-only bit) |
| 1393 |
|
| 1394 |
1.15.4: |
| 1395 |
------- |
| 1396 |
- Writing CDDA data via --cdr works again; had also been broken by attempts |
| 1397 |
to catch failing writes because of full disk. |
| 1398 |
- Also, the return values of WAV/CDR writing routines now properly indicate |
| 1399 |
error to avoid stupid endless loop of "smart" audio writing code that wants |
| 1400 |
to handle interruptions. Really, --cdr could just go and nobody would miss |
| 1401 |
it ... |
| 1402 |
- Fix stupid bug in mpg123_chomp_string() (introduced in 1.15.1), empty |
| 1403 |
lines were badly treated. Only usage in mpg123 is for parsing HTTP redirect |
| 1404 |
headers; malicious HTTP servers might exploit that (possibility to zero |
| 1405 |
bytes in memory). |
| 1406 |
- some cleanup for nagging mode |
| 1407 |
- more resync strictness to really catch (all) cases with changing decoder |
| 1408 |
structure; in practice badly needed when disabling seekbuffer (so it's |
| 1409 |
your fault, somehow ...) for non-seekable streams, otherwise not really |
| 1410 |
an issue because of readahead checking |
| 1411 |
I repeat: This fixes possibly fatal behaviour in the parser when readahead |
| 1412 |
checking is explicitly disabled (p.ex. via mpg123 --no-seekbuffer on |
| 1413 |
http streams). By default, readahead checking is _always_ active! |
| 1414 |
- build system fixed for automake 1.13 (thanks to Nix) |
| 1415 |
|
| 1416 |
1.15.3 |
| 1417 |
--- |
| 1418 |
- Fix WAV writing. AGAIN. People love to decode WAV to stdout in various |
| 1419 |
ways that started to get broken with me starting to care for people who |
| 1420 |
like to write to full disks. I frikkin' HATE this rat race! I'm even |
| 1421 |
starting to SHOUT. Now, the code prefers to write no header at all (when |
| 1422 |
there is no actual output) instead of possibly writing too many misleading |
| 1423 |
ones. Getting the blame for breaking dir2ogg repeatedly while trying to |
| 1424 |
cope with one fatal situation that you cannot really cope with sucks. Big |
| 1425 |
time. I hope that's it now! |
| 1426 |
|
| 1427 |
1.15.2: |
| 1428 |
------- |
| 1429 |
- build fix with older shells (== in configure) |
| 1430 |
|
| 1431 |
1.15.1: |
| 1432 |
------- |
| 1433 |
- libmpg123 API version 37 |
| 1434 |
- Fix corner case in HTTP communication with missing path in Location header |
| 1435 |
(bug 187). |
| 1436 |
- Prevent nasty alignment issues by not guessing about assembler alignment |
| 1437 |
when .balign is available (bug 188). |
| 1438 |
|
| 1439 |
1.15.0: |
| 1440 |
------- |
| 1441 |
- Added --continue (also see scripts/conplay). |
| 1442 |
- Added number row to terminal control keys for 10% jump points (for |
| 1443 |
navigating long tracks). |
| 1444 |
- Set xterm title always if asked, disregarding the -q switch (if you want |
| 1445 |
fully quiet, don't specify --title). |
| 1446 |
- Enable terminal mode in OS/2 by explicitly checking for and using |
| 1447 |
os2term library. |
| 1448 |
- Getting WAV/AU/CDR writing back to a sane state while still catching |
| 1449 |
out-of-disk when writing headers (none in case of CDR) but removing |
| 1450 |
that initial test that prevented writing on any non-seekable file (like, |
| 1451 |
/dev/stdout to a pipe). |
| 1452 |
- Added native audio output for QNX (thanks to Mike Gorchak), also improving |
| 1453 |
portability of configure script while at that. |
| 1454 |
- more robust recovery from ALSA issues (device suspend) |
| 1455 |
- Fix crash in module loader on *BSD. |
| 1456 |
- Extend time display to switch to hours above 60 minutes (hh:mm:ss, |
| 1457 |
ditching the sub-second precision) |
| 1458 |
- really include dithering in default x86-64 build. |
| 1459 |
- Fix mpg123_scan() not properly seeking back for all types of files (bug |
| 1460 |
3582628 ... it got a different number on sf.net now ... brilliant, folks!). |
| 1461 |
- Prevent false positives for "Frankenstein!" when using mpg123_scan(). |
| 1462 |
- Fix printing of negative positions with buffer (bug 186). |
| 1463 |
- Accept application/x-scpls as additional MIME type. |
| 1464 |
- Try to handle certain Windows toolchains that miss EOVERFLOW. |
| 1465 |
|
| 1466 |
1.14.4: |
| 1467 |
------- |
| 1468 |
Who reworks a parsing and data mangling without really making sure that |
| 1469 |
things still work like before? I hope I won't do so in future. Not again. |
| 1470 |
|
| 1471 |
- Fix resync logic to properly work again (used to prematurely end stream |
| 1472 |
on bad headers). A regression again, this sucks, but at least we got a |
| 1473 |
regression test for that now. |
| 1474 |
- Fix aeon-old regression (since 1.11.0) about short seeks: Bit reservoir |
| 1475 |
was reset also for short seeks that did not break continuity. |
| 1476 |
- Another damned regression got fixed: Sample-accurate seek for files |
| 1477 |
without full gapless info. |
| 1478 |
|
| 1479 |
1.14.3: |
| 1480 |
------- |
| 1481 |
- Fix regression from 1.14.1 in parsing of bad free format streams, |
| 1482 |
avoiding apparently endless loops (just very slow reading, in fact). |
| 1483 |
|
| 1484 |
1.14.2: |
| 1485 |
------- |
| 1486 |
- Fix writing of WAV to stdout. |
| 1487 |
It is still not the best of ideas to do so, though. At least make sure |
| 1488 |
to fix rate and channels. |
| 1489 |
|
| 1490 |
1.14.1: |
| 1491 |
------- |
| 1492 |
- Fix subtle bug that could trigger failure to detect a format change on |
| 1493 |
resync when using libmpg123's feeder API. |
| 1494 |
That bug has been there since ages but was neutralized by other (buggy) |
| 1495 |
behaviour of the parser before the little overhaul. The Law of an Even |
| 1496 |
Number of Bugs. |
| 1497 |
|
| 1498 |
1.14.0: |
| 1499 |
------- |
| 1500 |
- libmpg123 API version 36 (see NEWS.libmpg123) |
| 1501 |
- Add --ignore-streamlength. |
| 1502 |
- But also deal with concatenated (Frankenstein) streams: Not applying |
| 1503 |
gapless cutting once we're over the announced number of frames. |
| 1504 |
- Also, gapless cutting is only applied if relevant information is |
| 1505 |
present. Previously, at least the decoder delay has been cut. |
| 1506 |
- Add --lyrics for printout of lyrics (from USLT in ID3v2). |
| 1507 |
- Added handling of SIGUSR1 and SIGUSER2 to terminal control code, |
| 1508 |
configurable via --ctrlusr1 and --ctrlusr2. |
| 1509 |
- Some low-level API added (mpg123_framedata(), mpg123_framepos(), buffering |
| 1510 |
and resampling control). |
| 1511 |
- Added info about input buffer fill to mpg123_getstate(). |
| 1512 |
- ReplayGain: Try to detect LAME below 3.95 for the different reference |
| 1513 |
level of 83 dB (adding preamp of 6 dB). Version 3.95 itself (not 3.95.1) |
| 1514 |
I cannot detect. User-set gain values are not touched. |
| 1515 |
- Keep silent about missing bit reservoir when ignoring frames. That is |
| 1516 |
the whole point (mostly;-). |
| 1517 |
- Add the new/old WRITE_SAMPLE variant from MPlayer that makes the generic |
| 1518 |
decoder faster on older CPUs (x86 at least). Not on x86-64, though (it's |
| 1519 |
not enabled per default there). |
| 1520 |
- disable 3DNow and 3DNowExt DCT36, which is slow on modern CPUs |
| 1521 |
- Handle out-of-disk in the file writers (a bit, see |
| 1522 |
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=67259) |
| 1523 |
- Added Xcode project files to build libmpg123 on Mac OS and iOS |
| 1524 |
- 32 bit output for sndio output (patch by Brad Smith). |
| 1525 |
- Remote control interface knows LOADLIST command now. |
| 1526 |
- Now freeing meta data memory after printout. |
| 1527 |
- Some documentation cleanup, including manpage fixes by quadrispro. |
| 1528 |
- Re-enabled wildcard expansion on Windows (been broken by unicode file |
| 1529 |
name support). |
| 1530 |
- Fix MMX tabinit syntax (thanks to Marcel Müller for pointing that out). |
| 1531 |
- Fix SGI audio output (been broken since change to modules). |
| 1532 |
- Fix some fringe behaviour (mpg123_getformat() triggering needless reading |
| 1533 |
of next frame, possibly hitting bogus MPG123_NEED_MORE). |
| 1534 |
- Resync limit now also serves to increase amount of skipped junk on |
| 1535 |
beginning. |
| 1536 |
- Better separation of stream end and read error (in case there is no |
| 1537 |
stream opened, even). |
| 1538 |
- Don't always complain about failed free format header search (only with |
| 1539 |
verbosity level 3). |
| 1540 |
|
| 1541 |
1.13.8: |
| 1542 |
------- |
| 1543 |
- Fix build for ARM Thumb (incompatible assembly in some macros). |
| 1544 |
|
| 1545 |
1.13.7: |
| 1546 |
------- |
| 1547 |
- Fix endless loop in module loader when starting mpg123 in a directory |
| 1548 |
that does not exist. |
| 1549 |
|
| 1550 |
1.13.6: |
| 1551 |
------- |
| 1552 |
- Fix output of one random character in -vvv mode for ID3v2.2 frames |
| 1553 |
(no buffer overflow, move along, folks;-). |
| 1554 |
|
| 1555 |
1.13.5: |
| 1556 |
------- |
| 1557 |
- Fix reading of ReplayGain values from Lame tag (nobody seen this before?!) |
| 1558 |
(both actual values and the distinction between audiophile / radio). |
| 1559 |
- Accept application/octet-stream as input from HTTP. |
| 1560 |
- Update man page with encodings. |
| 1561 |
- Build fixes. |
| 1562 |
|
| 1563 |
1.13.4: |
| 1564 |
------- |
| 1565 |
- Fix bogus error on resync with big offsets (hits systems that have bigger |
| 1566 |
off_t than int), bug 3393801. |
| 1567 |
- Fix windows binary package build script again with plugdir. |
| 1568 |
|
| 1569 |
1.13.3: |
| 1570 |
------- |
| 1571 |
- Fix an endless loop on bad headers, bug 3267863. |
| 1572 |
- Prevent compiler warnings about unused variables with gcc 4.6 . |
| 1573 |
- Fix return value handling of getaddrinfo(), bug 3288333. |
| 1574 |
- Make decwin size computation work for OPT_ARM and sizeof(long) != 4 |
| 1575 |
(bug 3288360). |
| 1576 |
|
| 1577 |
1.13.2: |
| 1578 |
------- |
| 1579 |
- Updated .NET wrapper (MPG123_SKIP_ID3V2, encsize and mpg123_strlen |
| 1580 |
functions) by Malcolm Boczek. |
| 1581 |
- Fix crash when calling mpg123_decoder() before opening a track -- a rare |
| 1582 |
use case since one can choose a decoder with mpg123_new() already. |
| 1583 |
- Fix format change detection for certain (artificial) concatenated streams |
| 1584 |
(p.ex. MPEG 1 frames following MPEG 2 frames). |
| 1585 |
- Prevent the nasty of bug 3154889: No change of pitch without a current |
| 1586 |
audio format. No proper solution, but more like earlier behaviour. |
| 1587 |
- Fix some compiler warnings. |
| 1588 |
- Fix a memory leak in the module loader, also some in the examples, |
| 1589 |
for being pedantic. |
| 1590 |
- More use of AC_LANG_SOURCE to silence autoconf. |
| 1591 |
|
| 1592 |
1.13.1: |
| 1593 |
------- |
| 1594 |
- Fix --float and --8bit (MPG123_FORCE_FLOAT, MPG123_FORCE_8BIT) regression, |
| 1595 |
caused by introduction of 24 bit formats. (bug 3151597). |
| 1596 |
Btw: The use of specific format choice via `mpg123 -e f32` and friends |
| 1597 |
is encouraged (meaning mpg123_format_none() / mpg123_format() calls in |
| 1598 |
libmpg123 API). |
| 1599 |
- Loosen the parser restrictions: Allow the private header bit to vary. It |
| 1600 |
is not mpg123's business anyway (finally suggested by Marcel). |
| 1601 |
|
| 1602 |
1.13.0: |
| 1603 |
------- |
| 1604 |
- libmpg123 API version 29 (see NEWS.libmpg123) |
| 1605 |
- New optimization: ARM NEON (Cortex A series) -- kudos to Taihei, again! |
| 1606 |
- Added 24 bit integer output (truncation of 32 bit integer). |
| 1607 |
- Cleanup of symbols for the static library: Only have global symbols that |
| 1608 |
are actually needed, prefix them with INT123_ to avoid conflicts. |
| 1609 |
- Added --streamdump to get a copy of the data libmpg123 used. |
| 1610 |
- Added --icy-interval and tweaked libmpg123 to make playback of ICY stream |
| 1611 |
dumps possible. |
| 1612 |
- Added possibility to set module file suffix at build -- to be able to |
| 1613 |
avoid .la files for plugins. |
| 1614 |
- Removed compiler directives for alignment and disable associated tests. |
| 1615 |
The tests don't work on a wide range of compilers anyway, and newer gccs |
| 1616 |
do have force_align_arg_pointer to fix bad stacks. |
| 1617 |
- There is no ChangeLog file anymore... it was autogenerated from subversion |
| 1618 |
log anyway, so look there if interested. |
| 1619 |
|
| 1620 |
1.12.5: |
| 1621 |
------- |
| 1622 |
- Fix bug with the new meta data printout of the mpg123 app; embedded |
| 1623 |
null bytes in UTF-8 strings in non-UTF-8 environment would trigger buffer |
| 1624 |
overflow. |
| 1625 |
Thanks to Jakub Bogusz of PLD Linux for the tip. And yes, shame on Thomas |
| 1626 |
for changing working string handling code. At all. |
| 1627 |
|
| 1628 |
1.12.4: |
| 1629 |
------- |
| 1630 |
- Fix formatting of meta data printout in UTF-8 (string length computing). |
| 1631 |
As a collorary, ID3v1 data is reduced to ASCII in UTF-8 environment, |
| 1632 |
as we do never know what specific encoding that has. |
| 1633 |
|
| 1634 |
1.12.3: |
| 1635 |
------- |
| 1636 |
- Fix a long-standing bug that subtly broke http streaming with ICY meta |
| 1637 |
data when reading a bit more quickly, like when using the buffer. |
| 1638 |
I was a very simple and embarrassing bug, actually ... and it made |
| 1639 |
me wonder how normal streaming still worked rather well, generally:-/ |
| 1640 |
Thanks to Lint for staying with us and reporting bug 3022850, to finally |
| 1641 |
get a grip on streaming reliability. |
| 1642 |
|
| 1643 |
1.12.2: |
| 1644 |
------- |
| 1645 |
- Fix for nasty memory corruption on configurations that hand out addresses |
| 1646 |
in the upper half of the memory space (the poiner alignment function broke |
| 1647 |
in that case, bug 2996045). |
| 1648 |
- Various build and portability fixes (including making some exotic |
| 1649 |
configure switches work (again)). |
| 1650 |
- Add dump_seekindex example |
| 1651 |
- Sync mpg123_clr to 1.12 feature set, patch provided by Malcolm Boczek |
| 1652 |
And actually include it in release tarball! |
| 1653 |
- Rework mpg123.h logic for large file stuff a bit, clients can control |
| 1654 |
it by defining MPG123_NO_LARGENAME or MPG123_LARGESUFFIX. |
| 1655 |
- Include dumb wrappers to provide names suffixed with _64 on 64 bit |
| 1656 |
machines and _32 on 32 bit machines, respectively, to help clients that |
| 1657 |
insist on defining _FILE_OFFSET_BITS where it is not needed (or with a |
| 1658 |
non-large value). |
| 1659 |
- Tuning of the internal buffer code for feeder mode to minimize its |
| 1660 |
performance impact (works in 4K blocks now). |
| 1661 |
- Workaround for compiler bugs in Open64/PathScale/SunStudio (bug 3004396, |
| 1662 |
suggestion by Doug Gilmore). |
| 1663 |
Note that Sun Studio is still a tricky fellow, at least when it comes |
| 1664 |
to our preprocessed assembly. |
| 1665 |
Also, x86-Open64 recently produced another segfault in layer3.c on my |
| 1666 |
box... GNU and intel compilers are what one can use as something stable. |
| 1667 |
- Make mpg123_getformat() return more error codes (like MPG123_NEED_MORE). |
| 1668 |
- Fix handle I/O for clients with small file offset (32 bit when libmpg123 |
| 1669 |
has 64 bit). |
| 1670 |
- Fix 3DNow(Ext) standalone builds. |
| 1671 |
|
| 1672 |
1.12.1: |
| 1673 |
------- |
| 1674 |
- Update INSTALL for the dual-mode library. No code changes. |
| 1675 |
|
| 1676 |
1.12.0: |
| 1677 |
------- |
| 1678 |
Attention: This reverts the big bad libray name change. People did not |
| 1679 |
like libmpg123_64.so at all ... so Thomas went along with proving that |
| 1680 |
being responsible for a open source library package sucks for your life -- |
| 1681 |
he coded large file dual-mode into libmpg123. One library with both APIs, |
| 1682 |
like glibc. |
| 1683 |
|
| 1684 |
- libmpg123 25.0.25: |
| 1685 |
-- The separate libraries are gone again, this one is dual-mode (using |
| 1686 |
ca. 750 lines of not very funny code). |
| 1687 |
-- The library even translates callbacks between large file support modes. |
| 1688 |
-- Introduce handle-based custom I/O in libmpg123. |
| 1689 |
-- The header now defines MPG123_API_VERSION to help compile-time detection |
| 1690 |
of available functions (lib is version 25.0.25 now... MPG123_API_VERSION |
| 1691 |
is 25). |
| 1692 |
- Make the usage of AI_ADDRCONFIG dependend on a configure check. This |
| 1693 |
flag is not available everywhere. |
| 1694 |
|
| 1695 |
|
| 1696 |
1.11.0: |
| 1697 |
------- |
| 1698 |
Attention: There was a re-release of the source archive, because the |
| 1699 |
initial one missed the actual changes for the library name. |
| 1700 |
Sorry for the inconvenience:-/ |
| 1701 |
|
| 1702 |
- Big bad libray name change for builds with enabled large file support. |
| 1703 |
That will break libmpg123 binary compatibility on Linux/x86 when upgrading |
| 1704 |
from mpg123>=1.5.0 with enabled large file support. You need to relink |
| 1705 |
with the new library called libmpg123_64. |
| 1706 |
If you do not enable large file support, or it is implicit on your |
| 1707 |
platform (x86-64), the library keeps the old name of libmpg123 and |
| 1708 |
everything is fine. |
| 1709 |
- Assembler cleanup: |
| 1710 |
-- no use of compiler-based stack alignment (for SSE), helping portability |
| 1711 |
-- mostly performance neutral, hint at faster decoding for the dynamic |
| 1712 |
build and slower for static, but small change in any case |
| 1713 |
- Windows networking (access http streams in mingw builds). |
| 1714 |
- Do not ask for addresses that do not have matching interfaces configured |
| 1715 |
(IPv6 on a IPv4-only host, for example). That can help with broken DNS |
| 1716 |
servers that choke on IPv6 addresses (T-Online Speedport W502V, for example). |
| 1717 |
- Fix a potential ICY reading problem were ICY metadata could be read as |
| 1718 |
mp3 data (basically for MPEG frames bigger than the ICY interval). |
| 1719 |
|
| 1720 |
1.10.1: |
| 1721 |
------- |
| 1722 |
- Help multilib setups that boldly assume that headers are invariant |
| 1723 |
by removing the consistency check in mpg123.h and instead just adding a |
| 1724 |
suffix to relevant functions when _FILE_OFFSET_BITS is defined. Invalid |
| 1725 |
setups will now fail at the linking stage instead of the preprocessing stage. |
| 1726 |
That should cover bug 2934488. |
| 1727 |
- Fixes for gapless decoding: |
| 1728 |
-- Correctly skip padding larger than one MPEG frame (strange, but occurs). |
| 1729 |
-- Bug 2950218 (proper gapless cuts for seeking near the end). |
| 1730 |
- Make sure the search for the first header aborts after 64K of one-byte |
| 1731 |
reads, as always intended (bug 2951334). |
| 1732 |
Certain files (or even random data) were able to fool mpg123 sufficiently |
| 1733 |
enough that it basically reads through the whole file in 1-byte steps |
| 1734 |
in search for MPEG data. |
| 1735 |
The limit of 64K will very likely be configurable in a future mpg123 |
| 1736 |
version. |
| 1737 |
- Fix subtle bug with seeking in feeder mode: A seek close to the current |
| 1738 |
position (meaning: the needed data offset is already in mpg123's buffer |
| 1739 |
chain) resulted in skipped bytes. |
| 1740 |
- Improve the feeder mode for handling large amounts of junk at the |
| 1741 |
beginning, including proper passing of the request for more data when trying |
| 1742 |
to determine free format frame size. This also fixes endless looping as |
| 1743 |
reported in bug 2951334. |
| 1744 |
- The parser code still needs overhaul. It is not pretty. |
| 1745 |
- Compile fix for OpenAL. |
| 1746 |
|
| 1747 |
1.10.0: |
| 1748 |
------- |
| 1749 |
- Confirmed/fixed on OS/2 platform. |
| 1750 |
At least a static build works with native audio output and generic decoder. |
| 1751 |
- Make modules work with libtool-2.2.6b . |
| 1752 |
- Added pitch command to control interface. |
| 1753 |
- HTTP header field and MIME type parsing now case-insensitive (fixes |
| 1754 |
bug 2904736). |
| 1755 |
Also, the MIME-parsing for non-playlist URLs is done the same way as |
| 1756 |
from playlists now. |
| 1757 |
And, we interpret MIME types only to before a ";" (see bug 2836904). |
| 1758 |
- There is a build-time option to enable unicode file names on windows |
| 1759 |
now. UNIX (Linux) does not need that, UTF-8 works natively. |
| 1760 |
An unicode-enabled build of libmpg123 expects file names as UTF-8 strings, |
| 1761 |
opening of non-utf8 strings (by old applications) still works via fallback |
| 1762 |
when the conversion of the string or opening of the file failed. |
| 1763 |
- Also, on Windows, --realtime now works, along with added granularity of |
| 1764 |
the new --priority parameter. Note that you get the latter functionality |
| 1765 |
through nice/renice on UNIX, no need to add that to mpg123. |
| 1766 |
- Added experimental framebyframe API. |
| 1767 |
- Added a new Microsoft common language runtime wrapper (aka .NET wrapper) |
| 1768 |
written by Malcolm Boczek. See ports\MSVC++\2008clr\mpg123clr\ReadMe.txt |
| 1769 |
for further information |
| 1770 |
- Added Visual Studio 2010 Beta 2 project files for libmpg123 |
| 1771 |
- Updated autotools machinery, autogen.sh is gone, use `autoreconf -iv`. |
| 1772 |
|
| 1773 |
1.9.2: |
| 1774 |
------ |
| 1775 |
- Fix logic failure in gapless code: The trailing silence was only cut on |
| 1776 |
the first decode. So, seek-back and decode again never was gapless:-( |
| 1777 |
- Fix linker flags on MacOS 10.6 . |
| 1778 |
- Improve portability (mainly for Solaris/x86, possibly others). |
| 1779 |
- Fix reading from standard input in Windows (use binary mode). |
| 1780 |
|
| 1781 |
1.9.1: |
| 1782 |
------ |
| 1783 |
- Fix OpenAL output issue (bug 2840085) |
| 1784 |
- Fix theoretically possible discarding of some audio samples when getting |
| 1785 |
a new format. |
| 1786 |
- Fix unwanted verboseness (some error messages from library even when |
| 1787 |
MPG123_QUIET was specified). |
| 1788 |
- Fix back-to-beginning for feed_skip (fixes bug 2859531). |
| 1789 |
- Fix the CPU creep bug with NtoM decoding. |
| 1790 |
That one has been nasty on you with large files since bad frame fillup |
| 1791 |
has been introduced. |
| 1792 |
- Fix regression (since 1.9.0) in ID3 parsing: Now Foobar2000 RVA fields |
| 1793 |
are interpreted again (among others). |
| 1794 |
- Fix some compiler warnings, minor cleanup. |
| 1795 |
|
| 1796 |
1.9.0: |
| 1797 |
------ |
| 1798 |
- Free format support. |
| 1799 |
- ARM assembly optimizations (yay Taihei again!). |
| 1800 |
- Dither noise now runtime-generated, thus less bloated binary (thanks |
| 1801 |
Taihei...). |
| 1802 |
This means that dithered decoding is now included per default. |
| 1803 |
Please note that work is ongoing to improve the dithering quality, |
| 1804 |
more to come. |
| 1805 |
For example: Accurate rounding to 16bits is now always used for generic |
| 1806 |
dithered decoder, there are plans to adapt the noise for different |
| 1807 |
sampling frequencies. |
| 1808 |
- Buffer plays any audio type now. |
| 1809 |
- New output module: OpenAL |
| 1810 |
- Bug fixes: |
| 1811 |
-- Broken frame fillup for non-signed 8 bit formats with correct zero |
| 1812 |
(bug 2805665) |
| 1813 |
-- Crash on invalid UTF-16 in ID3 tags fixed (thanks to Andy Hefner) |
| 1814 |
-- Bad detection of separated UTF-16 strings in ID3 tags (bug 2834636). |
| 1815 |
- Topic ID3 and UTF: Now we are more tolerant with UTF16, even accepting |
| 1816 |
those broken tags that id3v2 produces (multiple conflicing BOMs). |
| 1817 |
- Build system allows AltiVec on non-Macs now (don't enforce unsupported |
| 1818 |
gcc flags). |
| 1819 |
- Terminal control mode is more verbose (gives hint about pressing 'h'). |
| 1820 |
- The library now offers a switch and small API to defer translation of |
| 1821 |
ID3 text data until client app wants to do it (or not). |
| 1822 |
|
| 1823 |
1.8.1: |
| 1824 |
------ |
| 1825 |
- Include improvements to integer decoder from SVN trunk. |
| 1826 |
They have been accidentally promised on 1.8.0 release announcements, |
| 1827 |
though they were not there. Here it is: ISO compliant fixed point decoding |
| 1828 |
(speed optimizations are still reserved for next release). |
| 1829 |
- Fixed build with ./configure --enable-modules (bug in configure script). |
| 1830 |
- Fix name of binary in help screen when called with path. |
| 1831 |
- Build fix for old gcc with AltiVec code. |
| 1832 |
- Update of Sony PSP build files. |
| 1833 |
|
| 1834 |
1.8.0: (The Taihei Monmament) |
| 1835 |
------ |
| 1836 |
- New and improved SSE optimizations! For x86-64, too! Also AltiVec! Fast |
| 1837 |
float output! Faster stereo! |
| 1838 |
Finally, this should put mpg123 into the efficiency-leading position on |
| 1839 |
current hardware! Thanks go out to Taihei Monma for pushing lots of new |
| 1840 |
assembler code. |
| 1841 |
- Added proper rounding modes to 16bit integer. |
| 1842 |
-- Use ./configure --enable-int-quality to prefer accuracy over speed. |
| 1843 |
-- Accurate code (generic, SSE, 3dnow -- i586 has always been good) |
| 1844 |
delivers ISO compliant quality with 16bit output. |
| 1845 |
-- Uses fast rounding for IEEE754 floats. |
| 1846 |
-- Mpg123 can do fully ISO compliant MPEG audio decoding to 16bits (of |
| 1847 |
course to 32bit float/int, too). |
| 1848 |
- subtle performance enhancements via broader data alignment |
| 1849 |
- Prefer SSE code over 3DNowExt. |
| 1850 |
-- It can be tight, but generally our new SSE code is better on CPUs that |
| 1851 |
can do both. |
| 1852 |
- Remove HF cutoff (SFB21), has been introduced in 0.59r . |
| 1853 |
- Fix layer 1 regression (been there since version 1.x). |
| 1854 |
-- Layer 1 ISO compliance test is positive now. |
| 1855 |
- Fix layer 2 regression (false positives header change). |
| 1856 |
-- Layer 2 ISO compliance test is positive now. |
| 1857 |
- more sample-accurateness |
| 1858 |
-- Clear frame buffers before seek. |
| 1859 |
-- Decode 4 frames in advance for layer 3 (2 for layer 1 and 2) per default. |
| 1860 |
-- Number of layer 3 frames to decoded in advance (and fill bit reservoir) is |
| 1861 |
runtime tunable (--preframes). |
| 1862 |
- Do not stop decoding after stray ID3v1 tags in streams (bug 2793677). |
| 1863 |
- Fix handling of negative RVA2 values in ID3v2 (bug 2792417). |
| 1864 |
- Discard bitreservoir of previous frames if a resync is needed. |
| 1865 |
- improve perceived randomness of --random (do not repeat too early) |
| 1866 |
- Fix special crash case in UTF16 conversion for ID3v2. |
| 1867 |
- MPG123_MODDIR environment variable for changing module directory at runtime |
| 1868 |
- arts output fixes (bug 2715128) |
| 1869 |
- win32 output swallowing less buffers at end (but still some audio is lost, |
| 1870 |
bug 2722991) |
| 1871 |
- tested mpg123 on OS/2; it works, but not the native audio output |
| 1872 |
(SDL works) |
| 1873 |
- WAV output announces supported output formats correctly |
| 1874 |
- fix buffer startup to make sure the first bits of audio are not discarded |
| 1875 |
(bug 2796802) |
| 1876 |
- re-enable the --gain parameter (the move to modules disabled that), |
| 1877 |
untested |
| 1878 |
- Libltdl is _not_ included anymore. |
| 1879 |
-- The host system is expected to provide it, otherwise plugins are not used. |
| 1880 |
-- Our copy does not get in the way anymore. |
| 1881 |
- enhancements of the MSVC++ builds, including optimizations using yasm |
| 1882 |
- general build system fixes |
| 1883 |
- Legacy build system is gone. |
| 1884 |
- code cleanup |
| 1885 |
-- signed/unsigned integer usage, make compilers more happy) |
| 1886 |
-- simplified synth selection code (it is _less_ code now, and does more) |
| 1887 |
- Fixed behaviour of MPG123_NEW_FORMAT: Now it does not stop you from |
| 1888 |
just continuing decoding without querying the (new) output format, this |
| 1889 |
behaviour regression had been there since somewhen after 1.4.3 . |
| 1890 |
|
| 1891 |
1.7.3: |
| 1892 |
------ |
| 1893 |
- Fix a regression introduced with the --doublespeed fix. Now seeking should |
| 1894 |
be a lot smoother again. |
| 1895 |
|
| 1896 |
1.7.2: |
| 1897 |
------ |
| 1898 |
- Fix a possible vulnerability in the ID3 code (negative encoding values). |
| 1899 |
|
| 1900 |
1.7.1: |
| 1901 |
------ |
| 1902 |
- Just one fix for making the RVA switch in terminal and generic control mode |
| 1903 |
work again (instead of plain silence). |
| 1904 |
|
| 1905 |
1.7.0: |
| 1906 |
------ |
| 1907 |
- Lots of output format fun! |
| 1908 |
-- now supporting 8, 16, 32 bit signed/unsigned integers, |
| 1909 |
32bit float (64bit float can be hacked in quickly) |
| 1910 |
-- optimized decoders use fallback routines for non-optimized |
| 1911 |
formats transparently |
| 1912 |
-- flexible resampling is automatically chosen when output does |
| 1913 |
not support standard rates (like a JACK server) |
| 1914 |
-- That meant quite some restructuring in the decoder code... |
| 1915 |
- Lots of core functionality now optional, enabling small-footprint |
| 1916 |
builds of libmpg123. |
| 1917 |
-- choosing among the MPEG layer codes |
| 1918 |
-- NtoM resampling |
| 1919 |
-- downsampling |
| 1920 |
-- feeder API (mpg123_open_feed()) |
| 1921 |
-- ID3v2 |
| 1922 |
-- String API |
| 1923 |
-- ICY |
| 1924 |
-- output formats |
| 1925 |
-- error/warning message printouts |
| 1926 |
-- ... a layer3-only shared libmpg123 can be just 107K on x86-64 |
| 1927 |
or 94K on x86 |
| 1928 |
- --preload (tune prefill before playback for buffered mode) |
| 1929 |
- win64 support (one report at least;-), modules working on Windows |
| 1930 |
- Windows/MSVC++: fixed handling of unicode file names, |
| 1931 |
mpg123_topen() now actually working there |
| 1932 |
-- You are obliged to use mpg123_tclose() now! |
| 1933 |
- using "plugins" subdir relative to mpg123 binary |
| 1934 |
(in addition to ../lib/mpg123) |
| 1935 |
- switch to libtool 2.2 and automake 1.10 for the build scripts |
| 1936 |
-- though no update to new libtool 2 API, yet |
| 1937 |
- some portability fixes |
| 1938 |
- prevent user from creating non-working I/O setups |
| 1939 |
(replacing timeout reader, ICY with feeding) |
| 1940 |
- JACK output accepts port names for -a, stereo gets mixed down |
| 1941 |
when only one port is chosen |
| 1942 |
- added sndio output, contributed by Christian Weisgerber |
| 1943 |
- Make --doublespeed paramter work, porting of which has been |
| 1944 |
forgotten in the 1.x series! |
| 1945 |
Along with that, a regression in decoding has been fixed |
| 1946 |
(concerning skipping of frames in general). |
| 1947 |
|
| 1948 |
1.6.4: |
| 1949 |
------ |
| 1950 |
- Fix for consistent NtoM resampled decoding and broken frames fillup. |
| 1951 |
|
| 1952 |
1.6.3: |
| 1953 |
------ |
| 1954 |
- Fix sf.net bug #2413608: Make sure a new format does not slip through |
| 1955 |
after early close. |
| 1956 |
- Include equalizer example file and a piece of wrapper code for MSVC++ |
| 1957 |
in the distribution. |
| 1958 |
- Do not claim to support unsigned 16 bit encoding (never been the case). |
| 1959 |
- Fix default fifo detection, now it actally activates fifo support! |
| 1960 |
|
| 1961 |
1.6.2: |
| 1962 |
------ |
| 1963 |
- Fix default IPv6 detection in configure.ac (a typo has been introduced |
| 1964 |
before). |
| 1965 |
|
| 1966 |
1.6.1: |
| 1967 |
------ |
| 1968 |
- Fix printing of largefile offsets in remote control interface. |
| 1969 |
- Some portability fixes (reduced compiler warnings on Solaris, p.ex.). |
| 1970 |
|
| 1971 |
1.6.0: |
| 1972 |
------ |
| 1973 |
- small things inside that I forgot to mention |
| 1974 |
- some new commands for remote control interface: |
| 1975 |
-- SCAN |
| 1976 |
-- SAMPLE |
| 1977 |
-- EQFILE |
| 1978 |
-- SHOWEQ |
| 1979 |
- added --keep-open command line flag (for remote control) |
| 1980 |
- fixed equalizer file parsing to really handle comment lines as example file |
| 1981 |
suggests |
| 1982 |
- more elaborate detection of UTF-8 locale, also --utf8 switch to force it |
| 1983 |
- added --fuzzy to enable inexact seeking (see below) |
| 1984 |
- added --index-size parameter for tuning accurate frame seek index |
| 1985 |
- enabling largefile support via configure |
| 1986 |
- libmpg123 11.0.11: |
| 1987 |
-- added mpg123_geteq(), mpg123_tell_stream() and mpg123_getstate() |
| 1988 |
-- API cleanup (take const char* for mpg123_open()) |
| 1989 |
-- calm down complainling (C++) compilers by completing the mpg123_channels |
| 1990 |
enum |
| 1991 |
-- fixed several possible crashes when user provides NULLs where it isn't |
| 1992 |
appropriate |
| 1993 |
-- workaround for frames that fail decoding (bad frame body, missing bit |
| 1994 |
reservoir): fill up with silence |
| 1995 |
That also fixes seeking issues related to bad frames since now the |
| 1996 |
fixed relation between frame and sample offsets is restored. |
| 1997 |
-- Finally realized what that the resampling code for integer math |
| 1998 |
(generic_nofpu) was just incomplete! |
| 1999 |
Now it works, using the defined integer multiplication. |
| 2000 |
-- Detect UTF-8 in ICY conversion (instead of just assuming CP-1252, |
| 2001 |
provided by Torsten Glaser). |
| 2002 |
-- Prevent ugly noise when the bit reservoir is not fully there |
| 2003 |
(p.ex. ignorantly cut mp3 files). |
| 2004 |
Concerned frames are silenced, but reservoir for following frames |
| 2005 |
is kept. |
| 2006 |
Thanks to Patrick Dehne for the investigation and patch! |
| 2007 |
-- New option for fuzzy seeking; trading sample accuracy for speed. |
| 2008 |
With that option, seeks positions are guessed using mean framesize or |
| 2009 |
the Xing VBR TOC is used. |
| 2010 |
-- Feeder streams work with seek index now. |
| 2011 |
-- Seek frame index is runtime tunable. |
| 2012 |
-- more caution with alignment issues for varying library users |
| 2013 |
- new project files to build/use libmpg123 with MSVC++ 2005 and 2008, |
| 2014 |
provided by Patrick Dehne |
| 2015 |
- fixed a regression that made the pause/loop mode in terminal control |
| 2016 |
slowly go backwards |
| 2017 |
|
| 2018 |
Big note for libmpg123 users: Make sure your application is compiled |
| 2019 |
with the same largefile setting as libmpg123! If that does not match, |
| 2020 |
you will get unresolved symbols (which is better than weird errors when |
| 2021 |
using a nonmatching off_t in arguments;-). |
| 2022 |
|
| 2023 |
1.5.1: |
| 2024 |
------ |
| 2025 |
- fix wav/au/cdr writing to stdout (bug #2044423) |
| 2026 |
- add more sensible --no-resync to replace --resync (bug #2044404) |
| 2027 |
- libmpg123 7.0.7 |
| 2028 |
-- fix thread safety of SSE decoder (bug #2053181) |
| 2029 |
-- fix robustness of length handling, added mpg123_set_filesize() (bug #2064322) |
| 2030 |
|
| 2031 |
1.5.0: |
| 2032 |
------ |
| 2033 |
- libmpg123 6.0.6 |
| 2034 |
-- Floating point decoding back again, (build time choice for now; |
| 2035 |
--with-cpu=generic_float). |
| 2036 |
-- More robust string handling; extended string API. |
| 2037 |
-- fixed an (so far) unnoticed ID3 bug that may have obscured comment fields |
| 2038 |
-- added mpg123_feed() as shortcut; using const input buffer now |
| 2039 |
-- resync is enabled again for ICY streams (the trouble in the past was |
| 2040 |
due to a reader bug, not the streams) |
| 2041 |
-- decode ICY text data to UTF-8 (thanks, Thorsten) |
| 2042 |
-- preserve file flags for timeout mode |
| 2043 |
- More elaborate (helpful?) error message for output format problems. |
| 2044 |
- Reworked HTTP code... and added IPv6 support! |
| 2045 |
- Fix the --proxy parameter (has been accidentally ignored before). |
| 2046 |
- Added --ignore-mime to work with web streams with funny playlist MIME |
| 2047 |
types like "audio/megurl". |
| 2048 |
- Know MIME audio/mpegurl. |
| 2049 |
- --timeout is now also used for the connection itself (not just reading). |
| 2050 |
- Now trying to resume ALSA device after suspend. |
| 2051 |
- subtle build changes (your CFLAGS rule now) |
| 2052 |
|
| 2053 |
1.4.3: |
| 2054 |
------ |
| 2055 |
- Fix mpg123_tell() and mpg123_seek() return values with respect to the |
| 2056 |
samples in decoding buffer (bug 1947373). |
| 2057 |
- Fix (bogus) 3DNow detection on IDT C6 (bug 1947982). |
| 2058 |
- Fix mono playback of win32 output (bug 1955157). |
| 2059 |
- Fix ABI compatibility with compilers that don't align the stack like |
| 2060 |
gcc does (fixing SSE crashes on win32). |
| 2061 |
|
| 2062 |
1.4.2: |
| 2063 |
------ |
| 2064 |
- Fix build problems (for Cygwin and Win32, perhaps others, too). |
| 2065 |
|
| 2066 |
1.4.1: |
| 2067 |
------ |
| 2068 |
- Fix a serious regression of terminal control mode (forgot to remove a |
| 2069 |
term_restore(), bug 1936548). |
| 2070 |
|
| 2071 |
1.4.0: |
| 2072 |
------ |
| 2073 |
- Enable runtime check for available and working output modules. |
| 2074 |
Now mpg123 tries all built modules (or a list specified in |
| 2075 |
mpg123 -o moda,modb,modc) in turn to find a working output. This minimizes the |
| 2076 |
situation of having to specify a device when default output doesn't work for |
| 2077 |
some reason. See bug 1910500. |
| 2078 |
- libmpg123 2.2.2 |
| 2079 |
-- Fixing an endless loop for ICY streams that suddenly end without error |
| 2080 |
(just EOF). |
| 2081 |
-- Further fixes around EOF handling in (buffered/ICY) streams. |
| 2082 |
- Enable user to interrupt mpg123 when stuck in a loop of failing to open a |
| 2083 |
track (with --loop). |
| 2084 |
- This time with correct RPM spec (hopefully... sorry, Michael!). |
| 2085 |
|
| 2086 |
1.3.1: |
| 2087 |
------ |
| 2088 |
- Enable snd_pcm_sw_params_set_xfer_align() for alsa-lib < 1.0.16 (bug 1908603). |
| 2089 |
- libmpg123 2.1.2 (no-op change) |
| 2090 |
|
| 2091 |
1.3.0: |
| 2092 |
------ |
| 2093 |
This is a _major_ fix release for http streaming! |
| 2094 |
Much more usable than earlier mpg123 1.x versions. |
| 2095 |
|
| 2096 |
- libmpg123 libtool-version 2.0.2 |
| 2097 |
-- Fix nasty bug in ICY reader that failed to account for partial reads |
| 2098 |
from slower network. |
| 2099 |
-- Now non-seekable streams can get peek-ahead for MPEG sync, too, triggered |
| 2100 |
by the MPG123_SEEKBUFFER flag. |
| 2101 |
-- Do not try to resync on streams with ICY metadata, that won't work. |
| 2102 |
Consequently, if there's unreliable network, use --loop -1 to make |
| 2103 |
mpg123 reconnect to the server on errors. |
| 2104 |
-- Applying a few layer 3 decoder fixes from old mhipp CVS (hail to the |
| 2105 |
creator;-) That includes the fix for bug 1895025. |
| 2106 |
-- Fix ID3v2 parser with very invalid claimed ID3v2 frame sizes (could |
| 2107 |
have triggered DOS before). |
| 2108 |
-- Oh, and fixed a steady memory leak in ID3 handling. Should mention that;-) |
| 2109 |
- Print ICY-NAME and ICY-URL again, as mpg123-0.6x did. |
| 2110 |
- Added --smooth option for not flusing buffer between tracks but at program |
| 2111 |
end only. |
| 2112 |
- Included some contributed ports/bindings of libmpg123 under ports/ . |
| 2113 |
|
| 2114 |
1.2.1: |
| 2115 |
------ |
| 2116 |
- libmpg123 libtool-version 1.2.1 (coincidence!) |
| 2117 |
-- Earlier check for free format headers to prevent them from screwing up |
| 2118 |
resync (free format still not supported) |
| 2119 |
-- bug 1889051: more flexible resync, not insisting on the format of the |
| 2120 |
first frame (which could have been bogus) |
| 2121 |
- Add an output write loop to handle SIGSTOP/CONT operation (bug 1890563). |
| 2122 |
- Fixed a bug where playback status for some http streams was not shown. |
| 2123 |
|
| 2124 |
1.2.0: |
| 2125 |
------ |
| 2126 |
- libmpg123 libtool-version 1.0.1 |
| 2127 |
-- See NEWS.libmpg123 for details. |
| 2128 |
-- This adds --resync-limit parameter to mpg123. |
| 2129 |
- Some build system work, including: |
| 2130 |
-- It is now possible to build a mpg123 rpm from the source tarball via |
| 2131 |
rpmbuild -tb . |
| 2132 |
-- configure: Accept --with-audio=foo,bar,bla (comma-separated list) in addition |
| 2133 |
to --with-audio="foo bar bla". |
| 2134 |
-- autogen.sh included in distribution. |
| 2135 |
-- Include the forgotten i486 files in the distribution (now that's embarrasing...). |
| 2136 |
Also a little fix for wrong --list-cpu on i486 build. |
| 2137 |
-- Fix build with MinGW32. |
| 2138 |
- Fix -v stat output (time display) for MinGW32 build. |
| 2139 |
|
| 2140 |
1.1.0: |
| 2141 |
------ |
| 2142 |
- Added arts output. |
| 2143 |
- More verbosity on lame/xing/info tags (on demand) instead of compile-time |
| 2144 |
debugging switch. |
| 2145 |
- XMMS2 plugin cleanup (submitted to XMMS2 for inclusion) |
| 2146 |
- Improved ID3v2 robustness (let bad tags not affect playback of the important |
| 2147 |
part). |
| 2148 |
- Terminal control: |
| 2149 |
-- Key for going to previous track ([d], because it's left of [f] usually... |
| 2150 |
no config file yet for that). |
| 2151 |
-- Key for printing current playlist, [l]. |
| 2152 |
-- Now possible to switch on verbosity also for mpg123 -q -C |
| 2153 |
-- Key for (re)printing ID3 tag info ([t]). |
| 2154 |
-- Key for (re)printing MPEG frame header info ([m]). |
| 2155 |
- Soften the -q option: Now you are able to increase verbosity after -q |
| 2156 |
again, like mpg123 -q -v (this fixes cplay's progress display). |
| 2157 |
|
| 2158 |
1.0.1: |
| 2159 |
------ |
| 2160 |
- Fix module loader to prevent crash in working paths with more than 49 |
| 2161 |
characters length (bug 1859413). |
| 2162 |
|
| 2163 |
1.0.0: |
| 2164 |
------ |
| 2165 |
- Fixed Pulseaudio. |
| 2166 |
- Cleaned up configure. |
| 2167 |
- Pushed remote control version to v3. |
| 2168 |
- Updated documentation. |
| 2169 |
- Fix VPATH build for generated mpg123.h . |
| 2170 |
|
| 2171 |
1.0rc3: |
| 2172 |
------- |
| 2173 |
- Fixed JACK output. |
| 2174 |
- Disable buffer when statically building CoreAudio in (MacOSX); with |
| 2175 |
CoreAudio module the buffer works, with static output it doesn't. |
| 2176 |
This is the situation because of fork() discrimination by Apple Inc. . |
| 2177 |
- Added verbosity to tell about ID3v2 text encodings (level 4). |
| 2178 |
- minor cleanup |
| 2179 |
|
| 2180 |
1.0rc2: |
| 2181 |
------- |
| 2182 |
- Fixed some bugs, the ID3v2 interface of libmpg123 is safer now (there |
| 2183 |
were possibly stale pointers in there). |
| 2184 |
- Buffer mode got vital improvements (yeah, that is sort of feature creep |
| 2185 |
during release process, but worth it) |
| 2186 |
The improved communication makes it possible to skip tracks in terminal |
| 2187 |
control mode without the hack to immediately restart playback. |
| 2188 |
To be able to do seeking in terminal mode with buffer properly, buffered |
| 2189 |
playback stops on seek keys. You restart playback after you are done |
| 2190 |
with seeking. |
| 2191 |
- Support either portaudio v18 or v19 API (v18 works for me, v19 works |
| 2192 |
according to user report). |
| 2193 |
- Audio output handling got safer and more clean, a byproduct of implementing |
| 2194 |
the above. I stumbled over some things and had to fix it (yeah, feature |
| 2195 |
creep in parts again, but still: Worth it!;-) |
| 2196 |
Any audio access is now restricted to either that standalone mpg123 |
| 2197 |
process or the buffer process, the output being opened _after_ the fork(). |
| 2198 |
There is hope that this fixes buffered output on MacOSX. |
| 2199 |
- More feature creep, this time because of something like that was already |
| 2200 |
included in the Debian mpg123: |
| 2201 |
--delay parameter to issue a pause before each track (does not make |
| 2202 |
sense for file writing outputs, though). |
| 2203 |
- Even more feature creep: remote control can now give ID3v2 data, also |
| 2204 |
in more raw form via new "tag" command. |
| 2205 |
This sort of qualifies as bugfix, actually, since it's item 1786430 on |
| 2206 |
the tracker;-) |
| 2207 |
- Make flexible rate computations more safe (especially on 32bit platforms) |
| 2208 |
by switching to the looping code instead of direct multiplication/division |
| 2209 |
(which blows up with integers). A possible effect was premature track |
| 2210 |
ending with a forced rate. |
| 2211 |
- Flexible rate mode works _at_all_ again with fixed output support |
| 2212 |
detection code (comparison of -1 with a size_t ended a loop all too early). |
| 2213 |
- check for error in flushing output (this ends mpg123 for a broken pipe, |
| 2214 |
for example) |
| 2215 |
|
| 2216 |
1.0rc1: |
| 2217 |
------- |
| 2218 |
- In one word: LOTS! |
| 2219 |
- Many small things that happened while migrating to the new setup. |
| 2220 |
- The decoder is now a library (libmpg123) which can be installed also |
| 2221 |
for other programs to use. This finally provides a heavily improved |
| 2222 |
replacement for the aged mpglib. We have doxygen API doc, example codes. |
| 2223 |
You can still choose to compile the decoder statically into the mpg123 |
| 2224 |
binary, though. |
| 2225 |
- We have a plugin system for audio output! This should be relieving to |
| 2226 |
package maintainers for binary distributions, drastically reducing the |
| 2227 |
number of builds they have to provide. |
| 2228 |
Here, too, you can choose to build one audio output into the binary |
| 2229 |
like before; you can have your old-school one-piece mpg123 or the hip |
| 2230 |
I-am-legion shared-lib-and-plugin flexible mpg123;-) |
| 2231 |
One exception: For now, you have to compile without modules in |
| 2232 |
MinGW32/MSYS. |
| 2233 |
- ID3v2 support has been enhanced and, in the case of specific comments |
| 2234 |
(those with a description), fixed. |
| 2235 |
The ID3 parsing is part of libmpg123, offering support for virtually |
| 2236 |
all textual information in ID3v2.2, ID3v2.3 and ID3v2.4 tags (along with |
| 2237 |
the usual 128 bytes of ID3v1 or ID3v1.1 in a block). |
| 2238 |
All tag texts are converted to UTF-8, allowing mpg123 to properly display |
| 2239 |
special chars in an Unicode terminal without fuzz (for non-UTF locales, |
| 2240 |
there is still the ASCII reduction). |
| 2241 |
- Gapless decoding (of layer 3 streams) is now considered to be a standard |
| 2242 |
feature and is enabled per default both at build- and runtime. |
| 2243 |
- ... |
| 2244 |
|
| 2245 |
0.68: |
| 2246 |
----- |
| 2247 |
- Fix bug 1807964: distorted playback of MPEG 2.5 files |
| 2248 |
|
| 2249 |
0.67: |
| 2250 |
----- |
| 2251 |
Thanks go out to the ROM 106.5FM team (http://www.rom.lu/) for supporting |
| 2252 |
this release with a donation on sf.net and a bottle of finest Gewuerztraminer |
| 2253 |
wine from Luxembourg! |
| 2254 |
|
| 2255 |
- verified that it builds on SGI IRIX 6.5 for MIPS32 and MIPS64 |
| 2256 |
- enable flexible rate for stdout decoding, too |
| 2257 |
- UTF8 filtering to ASCII finally works thanks to Mika Tiainen, see bug 1745847 |
| 2258 |
- corrected frame offset; -k was off by one |
| 2259 |
This means now that -k disagrees with mpg123 0.59r on many files because |
| 2260 |
the old version does play a frame of silence when encountering LAME tag |
| 2261 |
instead of dropping it for audio. |
| 2262 |
- added --timeout <n>: Possibility to end playback on a stream that doesn't give |
| 2263 |
data for <n> seconds. |
| 2264 |
- added --loop <n>: for ... well... looping playback of a track; motivation was |
| 2265 |
persistent internet streaming with unreliable connection (together with --timeout) |
| 2266 |
- build fixes |
| 2267 |
- use movap instruction in SSE assembly when compiler supports the needed |
| 2268 |
alignment (idea from MPlayer) |
| 2269 |
- show decoder options in their priority order in --list-cpu/--test-cpu |
| 2270 |
- added Perl script to benchmark each of mpg123's CPU optimizations |
| 2271 |
- portability enhancements and cleanups along with testing on SunOS 4.1.2 |
| 2272 |
with gcc-2.7.0 |
| 2273 |
- workaround for ugly flexible rate for MMX/SSE/3DNowExt code: |
| 2274 |
--with-cpu=mmx also includes i586 code as fallback; similar with the others |
| 2275 |
|
| 2276 |
0.66: |
| 2277 |
----- |
| 2278 |
- support for a combined build of x86 optimizations and runtime selection |
| 2279 |
among these The (supposedly) "highest" CPU-supported optimization is chosen |
| 2280 |
by default, --cpu, --list-cpu and --test-cpu parameters are there for you to |
| 2281 |
take control. |
| 2282 |
- default build for x86 systems is combined "x86" with generic, i386, |
| 2283 |
i586, MMX, 3DNow, SSE, 3DNowExt; "x86_dither" also includes the dithering |
| 2284 |
i586 decoder |
| 2285 |
- no automatic -march compiler flags anymore; the --with-cpu configure option |
| 2286 |
selects specific assembler code but special CFLAGS are up to you |
| 2287 |
- extended 3DNow and SSE optmizations from MPlayer's mp3lib |
| 2288 |
- x86 assembler optimizations adapted for MacOS X/Intel |
| 2289 |
- straight support for Windows using MinGW32, reactivated the native |
| 2290 |
WinMM output. Core functionality including assembler optmimizations |
| 2291 |
and WAV writing is there. |
| 2292 |
- assembler optimizations also for cygwin |
| 2293 |
- set remote-err automatically when putting audio to stdout |
| 2294 |
- a bit more general portability in the new build system |
| 2295 |
- fix file creation mode for -O |
| 2296 |
- experimental decoding to 32bit float (raw and WAV file): ./configure |
| 2297 |
--with-cpu=generic_float |
| 2298 |
- generic control interface (-R) can create and read from a named pipe, |
| 2299 |
parameter --fifo <path> |
| 2300 |
- audio bugfix: playback of mono file on stereo-only hardware, better |
| 2301 |
error reporting there |
| 2302 |
- ALSA output handling underruns |
| 2303 |
- MMX, SSE and 3DNowExt fallback to i586 and below or 3Dnow for forced |
| 2304 |
sample rate |
| 2305 |
- more terminal control: volume, RVA and verbosity controls |
| 2306 |
|
| 2307 |
0.65: |
| 2308 |
----- |
| 2309 |
- now allow crc bit to vary over stream (fixes files with bad lame tag |
| 2310 |
and some internet streams) |
| 2311 |
- do not try to parse id3v2.2 (as opposed to 2.3 and 2.4) |
| 2312 |
- correct id3v2.3 parsing for not expecting syncsafe integers for framesize, |
| 2313 |
2.4 introduced that |
| 2314 |
- omit gcc specific compiler flags when gcc is not there |
| 2315 |
- initital attempt to support sgi/irix with configure (please test) |
| 2316 |
|
| 2317 |
0.64: |
| 2318 |
----- |
| 2319 |
- fixing a potential denial of service problem; broken connection to server |
| 2320 |
could trigger an endless loop |
| 2321 |
|
| 2322 |
0.63: |
| 2323 |
----- |
| 2324 |
- build fixes, only relevant to developers and people who had problems building |
| 2325 |
|
| 2326 |
0.62: |
| 2327 |
----- |
| 2328 |
- JUMP command in generic frontend accepts offsets/positions in seconds |
| 2329 |
(JUMP 4s vs. JUMP 4) |
| 2330 |
- initial support for ICY meta data in SHOUTcast streams |
| 2331 |
- a bit of fixing with rva code, added rva and general volume control to |
| 2332 |
generic frontend |
| 2333 |
- accepting more MIME types for http streaming (application/pls and |
| 2334 |
audio/x-mpeg) |
| 2335 |
- ID3v2 info output taking less space per default - more resembling the |
| 2336 |
old ID3v1 view for short tags, full view with always one line per item |
| 2337 |
via extra --long-tag switch |
| 2338 |
- generally less verbosity (i.e. noise on console) per default |
| 2339 |
- ID3v2 now having some kind of support for unicode; trying to print what's |
| 2340 |
latin1-compatible and prevent messing up of terminal with unknown bytes |
| 2341 |
- several bug fixes and small improvements |
| 2342 |
|
| 2343 |
0.61: |
| 2344 |
----- |
| 2345 |
- improved AltiVec code from Taihei Monma |
| 2346 |
- an i486 optimization by Petr Salinger |
| 2347 |
- improving interactive experience (terminal, frontends) |
| 2348 |
-- prevent/lessen bad effect after seeking while paused |
| 2349 |
-- show targeted position while seeking in terminal mode while paused |
| 2350 |
-- not messing up terminal on unexpected errors |
| 2351 |
- decoder robustness - better file sync (weird junk at beginning, some vbr |
| 2352 |
frames) |
| 2353 |
- build system improvements: |
| 2354 |
-- fixing configure isses on some platforms |
| 2355 |
-- adding cygwin, kfreebsd |
| 2356 |
- extended fix for CVE-2006-1655 |
| 2357 |
- generic code should compiling again... |
| 2358 |
|
| 2359 |
0.60 final: (The Team!) |
| 2360 |
----------- |
| 2361 |
- no functional changes |
| 2362 |
|
| 2363 |
0.60-beta6: (Thomas Orgis) |
| 2364 |
----------- |
| 2365 |
- more use of ID3v2 tags, mpg123 now displays both (merged) info from |
| 2366 |
ID3v2 and ID3v1; trying to support both ID3v2.3 and ID3v2.4, but ignoring |
| 2367 |
encoding (UTF8 should still work if your terminal supports it, straight |
| 2368 |
unicode should work except for parsing genre numbers and multiline strings) |
| 2369 |
|
| 2370 |
0.60-beta5: (Thomas Orgis) |
| 2371 |
----------- |
| 2372 |
- more robust playlist support: |
| 2373 |
-- path/url length not limited to 1023 characters anymore |
| 2374 |
-- reading in of whole playlist at program start (old operation was not |
| 2375 |
really safe with playlist from http) |
| 2376 |
-- fixed bug where reading of playlist form stdin caused segfault (introduced |
| 2377 |
with the pls format support) |
| 2378 |
- smaller cleanups, screen output cosmetics |
| 2379 |
|
| 2380 |
0.60-beta4: (Nicholas Humfrey & Thomas Orgis) |
| 2381 |
----------- |
| 2382 |
- proper seeking, also for VBR streams |
| 2383 |
- real two-way seeking in remote control mode at all |
| 2384 |
- better estimates of remaining frames (on vbr files), exact if Xing header |
| 2385 |
is found |
| 2386 |
- Removed libao support (as it is GPL and we aren't - and we don't need |
| 2387 |
it with native Alsa) |
| 2388 |
- Added ALSA 0.9/1.0 support by Clemens Ladisch (old alsa is in |
| 2389 |
audio_alsa05.c but will most likely vanish soon) |
| 2390 |
- Added PortAudio audio-output support |
| 2391 |
- Added SDL audio-output support |
| 2392 |
- Fixed NAS audio-output support |
| 2393 |
- re-enabled MPEG 2.5, code just seems to work |
| 2394 |
- improved stream checking; being more willing in general (favor resync |
| 2395 |
instead of bail out) but directly give up if free format stream is obvious |
| 2396 |
- Whee! Initial Relative Volume Adjustment (buzz) support with reading of |
| 2397 |
ReplayGain values in lame/info tag, the RVA2 frames in ID3v2.4, ID3v2 TXXX |
| 2398 |
tags from foobar2000 (please test, someone!) and custom ID3v2.3 comments |
| 2399 |
entitled RVA / RVA_ALBUM / RVA_AUDIOPHILE / RVA_RADIO / RVA_MIX |
| 2400 |
- more persistence in trying to get http streams |
| 2401 |
|
| 2402 |
0.60-beta3: (Thomas Orgis) |
| 2403 |
----------- |
| 2404 |
- fixed bug with segfault in http code on stream from live365.com - |
| 2405 |
bug id 1529266 |
| 2406 |
- made http request HTTP/1.0 compilant again (tested only without proxy) - |
| 2407 |
bug id 1529319 |
| 2408 |
- now using http content-type header to check for correct types mpg123 can |
| 2409 |
understand |
| 2410 |
-- you can now always use -@ for a single http resource (direct stream or |
| 2411 |
playlist) since a stream will be reopened based on MIME type, |
| 2412 |
though omitting it will save you one http request to the server in the |
| 2413 |
direct stream case... |
| 2414 |
- now simple parsing of shoutcast pls playlists (how did you people use |
| 2415 |
shoutcast before?) |
| 2416 |
- playlist mode enhanced with selective playback of one entry in list |
| 2417 |
(--listentry parameter) |
| 2418 |
|
| 2419 |
0.60-beta2: (Thomas Orgis) |
| 2420 |
----------- |
| 2421 |
- fixed bug in terminal control mode that caused the f key to quit program |
| 2422 |
isntead of advance to next file (introduced by the first attempt to restore |
| 2423 |
"normal" Ctrl+C behaviour in terminal control mode) |
| 2424 |
|
| 2425 |
0.60-beta1: (Thomas Orgis & Nicholas Humfrey) |
| 2426 |
----------- |
| 2427 |
On the way to the first new offical realease since years! |
| 2428 |
|
| 2429 |
- new license: all LGPL except the old audio_alsa.c |
| 2430 |
- merge with Nicholas' sourceforge package |
| 2431 |
-- autooled configure/make system |
| 2432 |
-- MacOSX, Jack, libao (alsa 0.9/1.x support through that) |
| 2433 |
- experimental gapless playback for layer 3 |
| 2434 |
- merged in MMX and AltiVec optimizations |
| 2435 |
- security bug fix of GLSA 200607-01 and catching possible crashes found by fuzzing |
| 2436 |
- fixed many issues here and there |
| 2437 |
- polished help messages, updated man page... |
| 2438 |
|
| 2439 |
UNDERGROUND 0.59r-thor7: (Thomas Orgis <[email protected]>) (well, I'm going to |
| 2440 |
------------------------ release a _really_ official mpg123 in future) |
| 2441 |
- applied relevant stuff from Debian's 22: |
| 2442 |
-- fix for CVE-2006-1655 (buffer overflow in III_i_stereo()) |
| 2443 |
-- strict aliasing hack in WRITE_SAMPLE of decode_i386.c |
| 2444 |
-- fixed http streaming through proxy by actually using the request url... |
| 2445 |
-- buffer resync on Ctrl-C (cleaning, reducing pauses with multiple files) |
| 2446 |
-- removed unused esdserver variable from mpg123.h |
| 2447 |
-- did NOT apply the Debian Makefile/manpage changes (going to rewrite that |
| 2448 |
stuff anyway) |
| 2449 |
- made the netbsd-i386 targets visible as netbsd-x86 |
| 2450 |
|
| 2451 |
UNOFFICIAL 0.59r-thor6 (Thomas Orgis <[email protected]>) |
| 2452 |
---------------------- |
| 2453 |
- split nedbsd targets for realtime priority selection code; since one |
| 2454 |
needs -lpthread with it. standard netbsd target doesn't use realtime code -- |
| 2455 |
I won't recommend running mpg123 as root anyway! |
| 2456 |
|
| 2457 |
UNOFFICIAL 0.59r-thor5 (Thomas Orgis <[email protected]>) |
| 2458 |
---------------------- |
| 2459 |
- Separated the the use of char* equalfile as filename from the use as |
| 2460 |
TRUE/FALSE flag by introducing int have_eq_settings. Compilers kept nagging |
| 2461 |
about assigning and integer (TRUE) to char* ... and it feels more right |
| 2462 |
this way. |
| 2463 |
- Made control_generic aware of real being possibly different than float (seq |
| 2464 |
command used to raise an FPE on OSF1 when this assumption was not the case. |
| 2465 |
- Fixed the command line arg parsing to work properly on Alpha (32 and 64 |
| 2466 |
bit mixup) |
| 2467 |
|
| 2468 |
UNOFFICIAL 0.59r-thor4 (Thomas Orgis <[email protected]>) |
| 2469 |
---------------------- |
| 2470 |
- merged with 0.59r-19 from Debian project (Daniel Kobras |
| 2471 |
<[email protected]>), hopefully fixing all those security vulnerabilities |
| 2472 |
-> my dirty http_open and open_stream variants now replaced by more |
| 2473 |
proper code |
| 2474 |
-> still my (rather workloaded) parsing/processing in control_generic, |
| 2475 |
but now including the idea to watch out for \n, \r\n and \r (or \n\r, |
| 2476 |
for that matter;-) |
| 2477 |
|
| 2478 |
UNOFFICIAL 0.59r-thor3: (Thomas Orgis <[email protected]>) |
| 2479 |
----------------------- |
| 2480 |
- hacked additional variants of http_open and open_stream that return |
| 2481 |
errors instead of exit()ing; makes more sense when used by a frontend |
| 2482 |
- further cleanup (and return to using continue instead of nested |
| 2483 |
if(){}else{if()else{}}) in command processing, better error messages there |
| 2484 |
|
| 2485 |
UNOFFICIAL 0.59r-ThOr(remote-err,eq,flushing): (Thomas Orgis <[email protected]>) |
| 2486 |
---------------------------------------------- |
| 2487 |
- added audio_flush() calls to various places in control_generic.c to |
| 2488 |
make sure there is nothing left in there that hurts later (not sure if |
| 2489 |
this has effects) |
| 2490 |
- (re?)enabled (?) code for stream info |
| 2491 |
- corrected answer of JUMP (now gives actual reached position, +/- 1 frame |
| 2492 |
since I'll still have to figure out what frame 0 really is...) |
| 2493 |
|
| 2494 |
UNOFFICIAL 0.59r-realeq-remoteerr: (Thomas Orgis <[email protected]>) |
| 2495 |
---------------------------------- |
| 2496 |
- applied patch from Cool Feet Audio project ([email protected], see |
| 2497 |
README.cfa) to use real-time equalizer in remote mode |
| 2498 |
- applied patch from AMF (amf.sourceforge.net) by Steve Grundell for remote |
| 2499 |
communication not polluting the STDOUT where the audio data is read from |
| 2500 |
(instead using STDERR) ... and faster seeking, maybe |
| 2501 |
The patches go not cleanly together, but rejects are trivial. Thus, |
| 2502 |
a combined patch with both would makes sense. |
| 2503 |
- modified (IMHO improved) the control_generic command reading: now |
| 2504 |
always making sure that the full command is read up to a mandatory \n; |
| 2505 |
also reworked the application of the commands afterwards |
| 2506 |
- added SEQ command: simple eq with only 3 bands |
| 2507 |
- added SILENCE command: I don't want the playback messages when I don't |
| 2508 |
read them (since my frontend is reading the STDOUT it knows what is going on) |
| 2509 |
- added SLJ command: SILENCE-LOAD-JUMP... a hack for my hacked |
| 2510 |
mixplayd... maybe one should remove that again. |
| 2511 |
|
| 2512 |
0.59r: (MH) |
| 2513 |
------ |
| 2514 |
- applied audio_alib changes from Ralf Hildebrandt <[email protected]> |
| 2515 |
- some 'paetsches' from DK |
| 2516 |
- minor optimizations in layer3 (dequantize/huffman) |
| 2517 |
- BSDOS 4.0 with gcc added to Makefile (<[email protected]>) |
| 2518 |
- Solaris-ESD patch from Ryan Prosser <[email protected]> |
| 2519 |
- Added Frontend changes from Bertrand Petit <[email protected]> |
| 2520 |
- more DK 'paetsches' (final dk7-clubhaus edition), includes extended term |
| 2521 |
control |
| 2522 |
- SGI audio fix for non RAD machines from Erik Mouw <[email protected]> |
| 2523 |
- fixed ugly bug in layer3 dequant for bt==2 (may cause high frequency clitchs) |
| 2524 |
- AMD-3DNow optimizations in decode and dct64 |
| 2525 |
- OS/2 reworked from Samuel Audet (see audio_os2.c for more) |
| 2526 |
- added freebsd-esd make-entry from Daniel O'Connor ([email protected]) |
| 2527 |
- added enhanced head_check from D. Skarda <[email protected]> |
| 2528 |
- applied 'xterm-title-patch' from "Wilson, Jeff D" <[email protected]> |
| 2529 |
- more esd changes from Robert Bihlmeyer <[email protected]> |
| 2530 |
- applied Hannu Napari's <[email protected]> SGI audio patches |
| 2531 |
- minor changes in httpget.c and mpg123.c |
| 2532 |
- added native AIX support from [email protected] |
| 2533 |
- applied playlist patch from <[email protected]> |
| 2534 |
- more SGI audio patches from Gilles Zunino <[email protected]> |
| 2535 |
- applied esdserver patch from Matthew Parslow <[email protected]> |
| 2536 |
- added some fixes for control_generic |
| 2537 |
|
| 2538 |
0.59q: (MH) |
| 2539 |
------ |
| 2540 |
- ESD fixes |
| 2541 |
- minor bugfixes (DK patch ;) |
| 2542 |
- au and cdr 'support' (it's a hack) |
| 2543 |
- Fixed 'VBR' Bug in get_scale_fac1(). Thanx to <[email protected]> for |
| 2544 |
this. (Wasn't really a VBR Bug. The new encoders just triggered it.) |
| 2545 |
- Added equalizer patch from <[email protected]> |
| 2546 |
|
| 2547 |
0.59p: (MH) |
| 2548 |
------ |
| 2549 |
- Added mpglib (see mpglib directory) |
| 2550 |
- 'make generic' is more generic now |
| 2551 |
- Added HPUX/ALib support from Ducroquet Erwan ([email protected]) |
| 2552 |
- Added EsoundD support from <fill it in> |
| 2553 |
- Added exp. relatime support (compile with -DSET_RT) |
| 2554 |
- Added linux-sparc patch from <hmm lost email) |
| 2555 |
- Added genrepatch from Shane Wegner <[email protected]> |
| 2556 |
- Added wav-File patch Samuel Audet <[email protected]> |
| 2557 |
- Added SGI-RAD support from "J. Dean Brederson" <[email protected]> |
| 2558 |
- Added sajberplay/FreeBSD patch from Chou Ye-chi <[email protected]> |
| 2559 |
- Added 486 optimizations from Fabrice Bellard <[email protected]> |
| 2560 |
- Added combined output devices on SUN (ie Speaker and headphones together) |
| 2561 |
- Added audio_alsa.c (under GPL license) for the ALSA sound system from |
| 2562 |
A. Hermansen <[email protected]> and J. Kysela <[email protected]> |
| 2563 |
- Added K6-3DNow patches from KIMURA Takuhiro <[email protected]> |
| 2564 |
- Added MINT patches from Petr Stehlik <[email protected]> |
| 2565 |
- Fixed minor bug for linux-i486 and mono |
| 2566 |
|
| 2567 |
0.59o: (MH) |
| 2568 |
------ |
| 2569 |
- fixed Bug with stereo streams on mono audio hardware for OSS |
| 2570 |
- fixed a bug with mono output and 1:1 (no) rate conversion |
| 2571 |
- again changes in the probe code |
| 2572 |
- fix in the buffer code for the case, that audio parameters are changing |
| 2573 |
- more changes to the flexibel rate converter, should now work when |
| 2574 |
writing to STDOUT. |
| 2575 |
- Added Andy's (<[email protected]>) float2int speed up proposal |
| 2576 |
(check WRITE_SAMPLE in decode_i386.c) .. Maybe someone wanna take the |
| 2577 |
idea and put it into the decode_i586.s part? |
| 2578 |
- Added TK3Play support from Brian Foutz <[email protected]> |
| 2579 |
(compiles but untested) |
| 2580 |
- RIFF Header fix (according to Thomas Niederreiter's |
| 2581 |
<[email protected]> patch) |
| 2582 |
- m68k patch from Stefan Gybas <[email protected]> applied |
| 2583 |
- minor additional PPC changes applied |
| 2584 |
- resync and EOF hang fixed |
| 2585 |
- resync and bitrate correction relaxed |
| 2586 |
- Slightly change verbose output; added countdown |
| 2587 |
|
| 2588 |
0.59n: (MH) |
| 2589 |
------ |
| 2590 |
- fixed shuffle bug |
| 2591 |
- added memory mapped IO for file reading |
| 2592 |
- added MPEG 2.5 12kHz and 8kHz table entry |
| 2593 |
- started flexibel rate conversion .. |
| 2594 |
- new '-Z' / '--random' option |
| 2595 |
- minor clean-up |
| 2596 |
- splitted audio file in audio system dependend smaller parts |
| 2597 |
- started system stream support (external program: system.c) |
| 2598 |
- unsigned 8 bit (instead of ulaw) is now default for 8bit operation |
| 2599 |
- Linux PPC patch from Grant Erickson <[email protected]> applied |
| 2600 |
- added BSDi patch from Peter Berger <[email protected]>, who reported |
| 2601 |
a failure when catching signals |
| 2602 |
- minor bug fix in the control interface for sajber jukebox |
| 2603 |
- fixed the ugly 'Ctrl-Z in buffer mode' bug .. YES ;) |
| 2604 |
- added buffer preload when underrun occurs (preload = 1/8 buffer size) |
| 2605 |
- minor SUN audio clean up |
| 2606 |
|
| 2607 |
0.59m: (MH) |
| 2608 |
------ |
| 2609 |
- Bug with RIFF header streams fixed. |
| 2610 |
- HTTP auth option patch from Henrik P Johnson <[email protected]> |
| 2611 |
- NetBSD patch(s) added from <[email protected]> and <[email protected]> |
| 2612 |
- Added advanced shuffle support from Steven Tiger Lang <[email protected]> |
| 2613 |
- fixed bug with too large big_value field |
| 2614 |
- fixed (hopefully) the bug with the '-a' option |
| 2615 |
- work-around for some pedantic compilers in fr->synth init |
| 2616 |
- some changes for the 'generic' version |
| 2617 |
- applied NAS bug-fix patch |
| 2618 |
- new (good) MPEG 2.5 tables (from Niklas Beisert) |
| 2619 |
- added WIN32 support from Tony Million |
| 2620 |
- added some bug fixes from Niklas Beisert |
| 2621 |
- fixed another ugly bug in layer3 dequantize (wrote over the border |
| 2622 |
of the 'xr' field) |
| 2623 |
- a minor HPUX clean up |
| 2624 |
- added BSD patch from Kevin Brintnall <[email protected]> |
| 2625 |
- added Makefile.win32 |
| 2626 |
- added NAS big endian fix |
| 2627 |
|
| 2628 |
0.59l: (MH) |
| 2629 |
------ |
| 2630 |
- simple equalizer support (to be continued) |
| 2631 |
- added NAS patch from Martin Denn <[email protected]> |
| 2632 |
- real mono support |
| 2633 |
- added pentium optimized decode_i586 from Stefan Bieschewski <[email protected]> |
| 2634 |
- fixed a bug in MS dequantize function |
| 2635 |
|
| 2636 |
0.59k: (OF) |
| 2637 |
------ |
| 2638 |
- fixed "Accept" header in httpget.c |
| 2639 |
- fixed buffer overflow (causing core dumps) in httpget.c |
| 2640 |
- fixed display of song length |
| 2641 |
- fixed -b (buffer) problem on SGI / IRIX -- it definitely works now |
| 2642 |
- fixed problem when files with different sample rates where played, |
| 2643 |
it now works with -b (buffer), too |
| 2644 |
- fixed order of local variables in decode.c to work around a |
| 2645 |
compiler bug in ultrix |
| 2646 |
- fixed Makefile for ultrix |
| 2647 |
- reverted to old getbits.s (the new one could cause coredumps) |
| 2648 |
- more compact MPEG header display in non-verbose mode |
| 2649 |
- small fixes in buffer code and elsewhere |
| 2650 |
|
| 2651 |
0.59j: (MH) |
| 2652 |
------ |
| 2653 |
- added sajber jukebox control interface (it's currently a big hack) |
| 2654 |
(see 'JUKEBOX' file for more) |
| 2655 |
- added simple rewind facility .. (only used by sajber interface at the moment) |
| 2656 |
|
| 2657 |
0.59i: (MH) |
| 2658 |
----------- |
| 2659 |
- added front-end (remote) patch from "Brian J. Swetland" <[email protected]> |
| 2660 |
- added OS2 patches from Niclas Lindstrom <[email protected]> |
| 2661 |
- fixed 'rewind bug' |
| 2662 |
- added patches from Leo Broukhis <[email protected]> |
| 2663 |
- added shuffle patch from Tillmann Steinbrecher <[email protected]> |
| 2664 |
- added i386-getbits from M.Stekelenburg <[email protected]> |
| 2665 |
- added fallback to 8bit if no 16bit samples support (currently linux only) |
| 2666 |
- added (slightly changed) outburst patch |
| 2667 |
from Antti Andreimann <[email protected]> |
| 2668 |
- added 'http accept' patch from Hur TaeSung <[email protected]> |
| 2669 |
- fixed buffer mode bug |
| 2670 |
|
| 2671 |
0.59h: (MH) |
| 2672 |
------ |
| 2673 |
- added '--8bit' option to force 'ULAW 8 BIT' playing |
| 2674 |
- pcm buffer type changed to 'unsigned char *' |
| 2675 |
- plays 2:1 and 4:1 with the real frequency (ie 11025/22050 instead of 44100) |
| 2676 |
- program (re)sets (changed) frequency for every frame |
| 2677 |
- buffer mode is broken |
| 2678 |
|
| 2679 |
0.59g: (MH) |
| 2680 |
------ |
| 2681 |
- added support for MPEG 2.5 (it's a HACK!) .. mpg123 understands and plays |
| 2682 |
2.5 but it does it wrong. (you will hear this!) |
| 2683 |
- Fixed wrong values in BandInfo struct for 32kHz mode |
| 2684 |
- Some performance improvements and minor changes and bug-fixes. |
| 2685 |
- Tried the new imdct from the maplay1.2+ (version 1.81) package. (but |
| 2686 |
it was slightly slower on my system, currently disabled) |
| 2687 |
|
| 2688 |
0.59f: (OF) |
| 2689 |
------ |
| 2690 |
- HP-UX audio fix (provided by Damien Clermonte) |
| 2691 |
- Buffering (-b option) hopefully fixed. Please test! |
| 2692 |
|
| 2693 |
0.59e: |
| 2694 |
------ |
| 2695 |
- added Audio MPEG 2.0 support (but near untested) (MH) |
| 2696 |
|
| 2697 |
0.59d: (MH) |
| 2698 |
------ |
| 2699 |
- minor modifications to dct64_i386.c |
| 2700 |
- removed duplicated dependency 'dct64.o' in Makefile |
| 2701 |
|
| 2702 |
0.59c: (OF) |
| 2703 |
------ |
| 2704 |
- Another complete rework of the buffer system (-b option) (normally uses |
| 2705 |
mmap(), but it can also use SYSV-ShMem because mmap() is broken on linux). |
| 2706 |
|
| 2707 |
0.59: (MH) |
| 2708 |
----- |
| 2709 |
- extracted dct64() from decode*.c files. |
| 2710 |
- some changes to dct64() and decode*.c to allow auto-increment/decrement |
| 2711 |
- removed bit-counter in getbit-functions. Layer3 part2 now counts it itself. |
| 2712 |
|
| 2713 |
0.58: (OF) |
| 2714 |
----- |
| 2715 |
- Bugfix: not closing the audio device caused a few samples to be lost. |
| 2716 |
- Bugfix: audio_set_rate() was not called (!?!). |
| 2717 |
- Additional command line options "--doublespeed" and "--halfspeed" (couldn't |
| 2718 |
find better names). See the manpage. |
| 2719 |
- Complete redesign of command line options. See the manpage. |
| 2720 |
- Changed the buffer algorithm (-b). I'm not sure whether it's better or worse |
| 2721 |
now. |
| 2722 |
- Supports multiple files on the command line. Pressing Ctrl-C will skip to the |
| 2723 |
next MPEG file, pressing it twice within one second will abort mpg123 |
| 2724 |
completely. See the "INTERRUPT" section in the manpage. |
| 2725 |
- Support for http URLs. See also the -p option in the manpage. |
| 2726 |
- Support for list files. See also the -@ option in the manpage. |
| 2727 |
|
| 2728 |
0.57: (MH) |
| 2729 |
----- |
| 2730 |
- Put the downsampling code together with the full quality decode into one |
| 2731 |
binary. (new options -2to1,-4to1) |
| 2732 |
- Optimizations in the dct12. |
| 2733 |
- Removed the 'int' version. |
| 2734 |
|
| 2735 |
0.56: (OF) |
| 2736 |
----- |
| 2737 |
- Additional command line option "-rs" to try to resync on "broken" MPEG streams |
| 2738 |
(now called "--resync" or "-y"). |
| 2739 |
- Additional command line option "-b" to use audio output buffering. See the |
| 2740 |
manpage for additional information. |
| 2741 |
- Changed a few variable names and some other minor fixes, so the |
| 2742 |
source compiles more cleanly (without warnings) on most platforms (for |
| 2743 |
example, the FreeBSD port compiles without warnings using "-Wall -ansi |
| 2744 |
-pedantic"). |
| 2745 |
- Makefile changes: moved "solaris" to "solaris-gcc", new target |
| 2746 |
"solaris" (using Sun's SparcWorks cc, faster tha gcc!), new targets |
| 2747 |
"aix" and "generic". |
| 2748 |
|
| 2749 |
0.55: |
| 2750 |
----- |
| 2751 |
- removed some obsolete code from layer3.c (MH) |
| 2752 |
- changed scalefac stoing in layer3 (MH) |
| 2753 |
- decode_4to1.c added again. Renamed decode_lp.c to decode_2to1.c (MH) |
| 2754 |
(both not optimized .. still expterimental) |
| 2755 |
- Minor cleanups and optimizations in layer3. (MH) |
| 2756 |
- Removed some (probable) minor bugs. (MH) |
| 2757 |
- Changed 2**(...) scaling (and omitted a few muls) (MH) |
| 2758 |
- Changed Makefile (OF) |
| 2759 |
- Changed dequantize to reorder with a mapping table |
| 2760 |
(you can disable this by undefining MAP in layer3.c) (MH) |
| 2761 |
- removed the 'dummy' scale step for mixed mode (MH) |
| 2762 |
- Changed copy policy (MH) |
| 2763 |
- Modified dequant-reorder-mapping (MH) |
| 2764 |
|
| 2765 |
0.54: (MH) |
| 2766 |
----- |
| 2767 |
- Minor changes in the documents .. |
| 2768 |
- huffman.c: x->len,y->len removed .. always '15' for the important cases |
| 2769 |
- audio.c: some additions to the SOLARIS audio code |
| 2770 |
|
| 2771 |
0.53b: (OF) |
| 2772 |
------ |
| 2773 |
- Makefile: |
| 2774 |
-- Renamed SPARC10 to SUNOS (which is more appropriate). |
| 2775 |
Tested with SunOS 4.1.4 on a SPARCstation SLC, 20 MHz (322% CPU, |
| 2776 |
so no realtime decoding). |
| 2777 |
-- Added SOLARIS. Tested with Solaris 2.5.1 on an Ultra 1, 167 MHz (14% |
| 2778 |
CPU), a SPARCstation 5, 110 MHz (47% CPU), and a SPARCstation 10, 33 MHz |
| 2779 |
(68% CPU). |
| 2780 |
-- Added FreeBSD. Tested with 2.1.7 on a Pentium-90 (38% CPU) and 2.2 on a |
| 2781 |
Pentium-166 (20% CPU). |
| 2782 |
-- Added Digital Unix. Tested with DU 3.2 on a DEC 3000/500 (Alpha AXP |
| 2783 |
150 MHz, 33% CPU). Does not support DEC's audio interface ("AudioFile"), |
| 2784 |
decodes to stdout only. |
| 2785 |
-- Improved "clean" target to remove core files and editor backup files. |
| 2786 |
-- Added "install" target. |
| 2787 |
-- Added "dist" target to create a .tar.gz file of the source directory. |
| 2788 |
-- In the distributed Makefile, all system sections are commented out. When |
| 2789 |
you type "make" without uncommenting one of the sections, an appropriate |
| 2790 |
error message will be displayed. |
| 2791 |
- audio.c |
| 2792 |
Fixed problem when opening /dev/audio on Solaris: I had to remove O_NDELAY, |
| 2793 |
because writing to /dev/audio didn't block until the requested number of |
| 2794 |
samples could be written, but instead it wrote only as much samples as |
| 2795 |
it was able too. Sounded funny. Removing O_NDELAY fixed the problem. |
| 2796 |
I don't think that it hurts SunOS either, so I didn't make another #ifdef. |
| 2797 |
- common.c |
| 2798 |
Fixed bug by adding function finish_output(): The decoder writes the audio |
| 2799 |
samples into a buffer, and each time the buffer is full, it is written |
| 2800 |
to the audio device (or to stdout). But when the decoding is done, |
| 2801 |
there are some samples left in the buffer which aren't written yet -- |
| 2802 |
they were just discarded. This additional function fixes the problem by |
| 2803 |
writing the remaining samples from the buffer. It is called immediately |
| 2804 |
after the main frame loop in mpg123.c. |
| 2805 |
- decode*.c |
| 2806 |
Fixed compiler warning on symbol "div": Some compilers issue warnings |
| 2807 |
because the symbol div is already used for something else (see "man div"), |
| 2808 |
so I changed it to "divv". |
| 2809 |
- layer*.c Functions do_layer*: |
| 2810 |
-- Moved the declaration for audio_play_samples into mpg123.h. Makes the |
| 2811 |
code cleaner. |
| 2812 |
-- I moved the variables pcm_samples and pcm_point to common.c, so they are |
| 2813 |
shared between all modules. This was necessary because the finish_output() |
| 2814 |
function (see common.c above) needs to access them. |
| 2815 |
-- Renamed loop variables "i" and "j" to "k" in order to fix compiler warnings |
| 2816 |
for duplicate/hidden symbols (similar to "div" in decode*.c, see above). |
| 2817 |
Changed the preprocessor symbol AUDIOBUFSIZE into a global variable |
| 2818 |
"audiobufsize". This makes it possible to change it by a command |
| 2819 |
line option. |
| 2820 |
- layer1.c |
| 2821 |
Fixed error in function I_step_one, second parameter: unsigned int |
| 2822 |
scale_index[2][] --> ...[2][SBLIMIT] This caused an error with the DU |
| 2823 |
compiler (which is ok, because [2][] is incorrect according to ANSI). |
| 2824 |
I don't know whether [2][SBLIMIT] actually works correctly (I have no |
| 2825 |
layer-1 streams to test it), but at least it compiles without error, and |
| 2826 |
it appears to be correct (looking at the rest of the source). Heaven knows |
| 2827 |
why gcc doesn't issue an error, and what it actually makes from it. |
| 2828 |
- mpg123.1 |
| 2829 |
A simple manual page. Type "nroff -man mpg123.1 | more" to view it, or |
| 2830 |
install it in /usr/local/man/man1 (this is done automatically by "make |
| 2831 |
install"). |
| 2832 |
- mpg123.c |
| 2833 |
New boolean variable "quiet": If this variable is set to TRUE (command line |
| 2834 |
option -q), no messages are printed. |