Debian Codegraph @

ports/stm32/boards/PYBD_SF6/board_init.c

raw
1 /*
2 * This file is part of the MicroPython project, http://micropython.org/
3 *
4 * The MIT License (MIT)
5 *
6 * Copyright (c) 2025 Damien P. George
7 *
8 * Permission is hereby granted, free of charge, to any person obtaining a copy
9 * of this software and associated documentation files (the "Software"), to deal
10 * in the Software without restriction, including without limitation the rights
11 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
12 * copies of the Software, and to permit persons to whom the Software is
13 * furnished to do so, subject to the following conditions:
14 *
15 * The above copyright notice and this permission notice shall be included in
16 * all copies or substantial portions of the Software.
17 *
18 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
19 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
20 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
21 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
22 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
23 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
24 * THE SOFTWARE.
25 */
26
27 #include <stdbool.h>
28 #include "boardctrl.h"
29 #include "qspi.h"
30
31 #if BUILDING_MBOOT
32 #include "mboot/mboot.h"
33 #endif
34
35 // Use PYBD_SF2 as base configuration.
36 #include "boards/PYBD_SF2/board_init.c"
37
38 // Adesto AT25SF161 16-MBit.
39 static const mp_spiflash_chip_params_t chip_params_at25sf161 = {
40 .jedec_id = 0x01861f,
41 .memory_size_bytes_log2 = 21,
42 .qspi_prescaler = 3, // maximum frequency 104MHz
43 .qread_num_dummy = 2,
44 };
45
46 // Infineon S25FL064 64-MBit.
47 static const mp_spiflash_chip_params_t chip_params_s25fl064 = {
48 .jedec_id = 0x176001,
49 .memory_size_bytes_log2 = 23,
50 .qspi_prescaler = 2, // maximum frequency 108MHz
51 .qread_num_dummy = 4,
52 };
53
54 // Selection of possible SPI flash chips.
55 static const mp_spiflash_chip_params_t *const chip_params_table[] = {
56 &chip_params_at25sf161,
57 &chip_params_s25fl064,
58 };
59
60 void board_early_init_sf6(void) {
61 // Initialise default SPI flash parameters.
62 MICROPY_BOARD_SPIFLASH_CHIP_PARAMS0 = &chip_params_at25sf161;
63 MICROPY_BOARD_SPIFLASH_CHIP_PARAMS1 = &chip_params_at25sf161;
64
65 // Continue with standard board early init.
66 board_early_init();
67 }
68
69 int mp_spiflash_detect(mp_spiflash_t *spiflash, int ret, uint32_t devid) {
70 if (ret != 0) {
71 // Could not identify flash. Succeed anyway using default chip parameters.
72 return 0;
73 }
74
75 // Try to detect the SPI flash based on the JEDEC id.
76 for (size_t i = 0; i < MP_ARRAY_SIZE(chip_params_table); ++i) {
77 if (devid == chip_params_table[i]->jedec_id) {
78 spiflash->chip_params = chip_params_table[i];
79 if (spiflash->config->bus_kind == MP_SPIFLASH_BUS_QSPI) {
80 // Reinitialise the QSPI but to set new size, prescaler and dummy bytes.
81 uint8_t num_dummy = spiflash->chip_params->qread_num_dummy;
82 spiflash->config->bus.u_qspi.proto->ioctl(spiflash->config->bus.u_qspi.data, MP_QSPI_IOCTL_INIT, num_dummy);
83 }
84 break;
85 }
86 }
87
88 return 0;
89 }