/* * This file is part of the MicroPython project, http://micropython.org/ * * The MIT License (MIT) * * Copyright (c) 2025 Damien P. George * * Permission is hereby granted, free of charge, to any person obtaining a copy * of this software and associated documentation files (the "Software"), to deal * in the Software without restriction, including without limitation the rights * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell * copies of the Software, and to permit persons to whom the Software is * furnished to do so, subject to the following conditions: * * The above copyright notice and this permission notice shall be included in * all copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN * THE SOFTWARE. */ #include #include "boardctrl.h" #include "qspi.h" #if BUILDING_MBOOT #include "mboot/mboot.h" #endif // Use PYBD_SF2 as base configuration. #include "boards/PYBD_SF2/board_init.c" // Adesto AT25SF161 16-MBit. static const mp_spiflash_chip_params_t chip_params_at25sf161 = { .jedec_id = 0x01861f, .memory_size_bytes_log2 = 21, .qspi_prescaler = 3, // maximum frequency 104MHz .qread_num_dummy = 2, }; // Infineon S25FL064 64-MBit. static const mp_spiflash_chip_params_t chip_params_s25fl064 = { .jedec_id = 0x176001, .memory_size_bytes_log2 = 23, .qspi_prescaler = 2, // maximum frequency 108MHz .qread_num_dummy = 4, }; // Selection of possible SPI flash chips. static const mp_spiflash_chip_params_t *const chip_params_table[] = { &chip_params_at25sf161, &chip_params_s25fl064, }; void board_early_init_sf6(void) { // Initialise default SPI flash parameters. MICROPY_BOARD_SPIFLASH_CHIP_PARAMS0 = &chip_params_at25sf161; MICROPY_BOARD_SPIFLASH_CHIP_PARAMS1 = &chip_params_at25sf161; // Continue with standard board early init. board_early_init(); } int mp_spiflash_detect(mp_spiflash_t *spiflash, int ret, uint32_t devid) { if (ret != 0) { // Could not identify flash. Succeed anyway using default chip parameters. return 0; } // Try to detect the SPI flash based on the JEDEC id. for (size_t i = 0; i < MP_ARRAY_SIZE(chip_params_table); ++i) { if (devid == chip_params_table[i]->jedec_id) { spiflash->chip_params = chip_params_table[i]; if (spiflash->config->bus_kind == MP_SPIFLASH_BUS_QSPI) { // Reinitialise the QSPI but to set new size, prescaler and dummy bytes. uint8_t num_dummy = spiflash->chip_params->qread_num_dummy; spiflash->config->bus.u_qspi.proto->ioctl(spiflash->config->bus.u_qspi.data, MP_QSPI_IOCTL_INIT, num_dummy); } break; } } return 0; }