Debian Codegraph @

ports/nrf/boards/SEEED_XIAO_NRF52/mpconfigboard.h

raw
1 /*
2 * This file is part of the MicroPython project, http://micropython.org/
3 *
4 * The MIT License (MIT)
5 *
6 * Copyright (c) 2016 Glenn Ruben Bakke
7 *
8 * Permission is hereby granted, free of charge, to any person obtaining a copy
9 * of this software and associated documentation files (the "Software"), to deal
10 * in the Software without restriction, including without limitation the rights
11 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
12 * copies of the Software, and to permit persons to whom the Software is
13 * furnished to do so, subject to the following conditions:
14 *
15 * The above copyright notice and this permission notice shall be included in
16 * all copies or substantial portions of the Software.
17 *
18 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
19 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
20 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
21 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
22 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
23 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
24 * THE SOFTWARE.
25 */
26
27 #define MICROPY_HW_BOARD_NAME "XIAO nRF52840 Sense"
28 #define MICROPY_HW_MCU_NAME "NRF52840"
29 #define MICROPY_PY_SYS_PLATFORM "nrf52"
30
31 #define MICROPY_BOARD_EARLY_INIT XIAO_board_early_init
32 #define MICROPY_BOARD_DEINIT XIAO_board_deinit
33 #define MICROPY_BOARD_ENTER_BOOTLOADER(nargs, args) XIAO_board_enter_bootloader()
34
35 #define MICROPY_HW_ENABLE_USBDEV (1)
36 #define MICROPY_HW_USB_CDC (1)
37 #define MICROPY_PY_MACHINE_UART (1)
38 #define MICROPY_PY_MACHINE_HW_PWM (1)
39 #define MICROPY_PY_MACHINE_RTCOUNTER (1)
40 #define MICROPY_PY_MACHINE_I2C (1)
41 #define MICROPY_PY_MACHINE_ADC (1)
42 #define MICROPY_PY_MACHINE_TEMP (1)
43 #define MICROPY_HW_HAS_FLASH (1)
44
45 #define MICROPY_HW_ENABLE_RNG (1)
46
47 #define MICROPY_HW_HAS_LED (1)
48 #define MICROPY_HW_LED_COUNT (4)
49 #define MICROPY_HW_LED_PULLUP (1)
50
51 #define MICROPY_HW_LED1 (17) // LED1
52 #define MICROPY_HW_LED2 (26) // LED2
53 #define MICROPY_HW_LED3 (30) // LED3
54 #define MICROPY_HW_LED4 (6) // LED4
55
56 // UART config
57 #define MICROPY_HW_UART1_TX (32 + 11)
58 #define MICROPY_HW_UART1_RX (32 + 12)
59
60 // SPI0 config
61 #define MICROPY_HW_SPI0_NAME "SPI0"
62
63 #define MICROPY_HW_SPI0_SCK (32 + 13)
64 #define MICROPY_HW_SPI0_MISO (32 + 14)
65 #define MICROPY_HW_SPI0_MOSI (32 + 15)
66
67 #define MICROPY_HW_PWM0_NAME "PWM0"
68 #define MICROPY_HW_PWM1_NAME "PWM1"
69 #define MICROPY_HW_PWM2_NAME "PWM2"
70
71 #define HELP_TEXT_BOARD_LED "1,2,3,4"
72
73 // Enabling these VID/PID values require to include mpconfigboard.h into usb_descriptors.c.
74 // But there is an open discussion on whether specific VID/PID values are wanted.
75 // 1200BPS touch is not supported at the moment in the USB driver, but at least the flag is set.
76 #define MICROPY_HW_USB_VID (0x2886)
77 #define MICROPY_HW_USB_PID (0x0045)
78 #define MICROPY_HW_USB_CDC_1200BPS_TOUCH (1)
79
80 void XIAO_board_early_init(void);
81 void XIAO_board_deinit(void);
82 void XIAO_board_enter_bootloader(void);