Debian Codegraph @

upstream/debian-trixie/man5/exports.5

raw
1 .\"@(#)exports.5"
2 .\"
3 .TH exports 5 "31 December 2009"
4 .SH NAME
5 exports \- NFS server export table
6 .SH DESCRIPTION
7 The file
8 .I /etc/exports
9 contains a table of local physical file systems on an NFS server
10 that are accessible to NFS clients.
11 The contents of the file are maintained by the server's system
12 administrator.
13 .PP
14 Each file system in this table has a list of options and an
15 access control list.
16 The table is used by
17 .BR exportfs (8)
18 to give information to
19 .BR mountd (8).
20 .PP
21 The file format is similar to the SunOS
22 .I exports
23 file. Each line contains an export point and a whitespace-separated list
24 of clients allowed to mount the file system at that point. Each listed
25 client may be immediately followed by a parenthesized, comma-separated
26 list of export options for that client. No whitespace is permitted
27 between a client and its option list.
28 .PP
29 Also, each line may have one or more specifications for default options
30 after the path name, in the form of a dash ("\-") followed by an option
31 list. The option list is used for all subsequent exports on that line
32 only.
33 .PP
34 Blank lines are ignored. A pound sign ("#") introduces a comment to the
35 end of the line. Entries may be continued across newlines using a
36 backslash. If an export name contains spaces it should be quoted using
37 double quotes. You can also specify spaces or other unusual character in
38 the export name using a backslash followed by the character code as three
39 octal digits.
40 .PP
41 To apply changes to this file, run
42 .BR "exportfs \-ra"
43 or restart the NFS server.
44 .PP
45 .SS Machine Name Formats
46 NFS clients may be specified in a number of ways:
47 .IP "single host
48 You may specify a host either by an
49 abbreviated name recognized be the resolver, the fully qualified domain
50 name, an IPv4 address, or an IPv6 address. IPv6 addresses must not be
51 inside square brackets in /etc/exports lest they be confused with
52 character-class wildcard matches.
53 .IP "IP networks
54 You can also export directories to all hosts on an IP (sub-) network
55 simultaneously. This is done by specifying an IP address and netmask pair
56 as
57 .IR address/netmask
58 where the netmask can be specified in dotted-decimal format, or as a
59 contiguous mask length.
60 For example, either `/255.255.252.0' or `/22' appended
61 to the network base IPv4 address results in identical subnetworks with 10 bits
62 of host. IPv6 addresses must use a contiguous mask length and must not be inside square brackets to avoid confusion with character-class wildcards. Wildcard characters generally do not work on IP addresses, though they
63 may work by accident when reverse DNS lookups fail.
64 .IP "wildcards
65 Machine names may contain the wildcard characters \fI*\fR and \fI?\fR, or may contain character class lists within [square brackets].
66 This can be used to make the \fIexports\fR file more compact; for instance,
67 \fI*.cs.foo.edu\fR matches all hosts in the domain
68 \fIcs.foo.edu\fR. As these characters also match the dots in a domain
69 name, the given pattern will also match all hosts within any subdomain
70 of \fIcs.foo.edu\fR.
71 .IP "netgroups
72 NIS netgroups may be given as
73 .IR @group .
74 Only the host part of each
75 netgroup members is consider in checking for membership. Empty host
76 parts or those containing a single dash (\-) are ignored.
77 .IP "anonymous
78 This is specified by a single
79 .I *
80 character (not to be confused with the
81 .I wildcard
82 entry above) and will match all clients.
83 .\".TP
84 .\".B =public
85 .\"This is a special ``hostname'' that identifies the given directory name
86 .\"as the public root directory (see the section on WebNFS in
87 .\".BR nfsd (8)
88 .\"for a discussion of WebNFS and the public root handle). When using this
89 .\"convention,
90 .\".B =public
91 .\"must be the only entry on this line, and must have no export options
92 .\"associated with it. Note that this does
93 .\".I not
94 .\"actually export the named directory; you still have to set the exports
95 .\"options in a separate entry.
96 .\".PP
97 .\"The public root path can also be specified by invoking
98 .\".I nfsd
99 .\"with the
100 .\".B \-\-public\-root
101 .\"option. Multiple specifications of a public root will be ignored.
102 .PP
103 If a client matches more than one of the specifications above, then
104 the first match from the above list order takes precedence - regardless of
105 the order they appear on the export line. However, if a client matches
106 more than one of the same type of specification (e.g. two netgroups),
107 then the first match from the order they appear on the export line takes
108 precedence.
109 .SS RPCSEC_GSS security
110 You may use the special strings "gss/krb5", "gss/krb5i", or "gss/krb5p"
111 to restrict access to clients using rpcsec_gss security. However, this
112 syntax is deprecated; on linux kernels since 2.6.23, you should instead
113 use the "sec=" export option:
114 .TP
115 .IR sec=
116 The sec= option, followed by a colon-delimited list of security flavors,
117 restricts the export to clients using those flavors. Available security
118 flavors include sys (the default--no cryptographic security), krb5
119 (authentication only), krb5i (integrity protection), and krb5p (privacy
120 protection). For the purposes of security flavor negotiation, order
121 counts: preferred flavors should be listed first. The order of the sec=
122 option with respect to the other options does not matter, unless you
123 want some options to be enforced differently depending on flavor.
124 In that case you may include multiple sec= options, and following options
125 will be enforced only for access using flavors listed in the immediately
126 preceding sec= option. The only options that are permitted to vary in
127 this way are ro, rw, no_root_squash, root_squash, and all_squash.
128 .SS Transport layer security
129 The Linux NFS server allows the use of RPC-with-TLS (RFC 9289) to
130 protect RPC traffic between itself and its clients.
131 Alternately, administrators can secure NFS traffic using a VPN,
132 or an ssh tunnel or similar mechanism, in a way that is transparent
133 to the server.
134 .PP
135 To enable the use of RPC-with-TLS, the server's administrator must
136 install and configure
137 .BR tlshd
138 to handle transport layer security handshake requests from the local
139 kernel.
140 Clients can then choose to use RPC-with-TLS or they may continue
141 operating without it.
142 .PP
143 Administrators may require the use of RPC-with-TLS to protect access
144 to individual exports.
145 This is particularly useful when using non-cryptographic security
146 flavors such as
147 .IR sec=sys .
148 The
149 .I xprtsec=
150 option, followed by an unordered colon-delimited list of security policies,
151 can restrict access to the export to only clients that have negotiated
152 transport-layer security.
153 Currently supported transport layer security policies include:
154 .TP
155 .IR none
156 The server permits clients to access the export
157 without the use of transport layer security.
158 .TP
159 .IR tls
160 The server permits clients that have negotiated an RPC-with-TLS session
161 without peer authentication (confidentiality only) to access the export.
162 Clients are not required to offer an x.509 certificate
163 when establishing a transport layer security session.
164 .TP
165 .IR mtls
166 The server permits clients that have negotiated an RPC-with-TLS session
167 with peer authentication to access the export.
168 The server requires clients to offer an x.509 certificate
169 when establishing a transport layer security session.
170 .PP
171 If RPC-with-TLS is configured and enabled and the
172 .I xprtsec=
173 option is not specified, the default setting for an export is
174 .IR xprtsec=none:tls:mtls .
175 With this setting, the server permits clients to use any transport
176 layer security mechanism or none at all to access the export.
177 .SS General Options
178 .BR exportfs
179 understands the following export options:
180 .TP
181 .IR secure
182 This option requires that requests not using gss originate on an
183 Internet port less than IPPORT_RESERVED (1024). This option is on by default.
184 To turn it off, specify
185 .IR insecure .
186 (NOTE: older kernels (before upstream kernel version 4.17) enforced this
187 requirement on gss requests as well.)
188 .TP
189 .IR rw
190 Allow both read and write requests on this NFS volume. The
191 default is to disallow any request which changes the filesystem.
192 This can also be made explicit by using
193 the
194 .IR ro " option.
195 .TP
196 .IR async
197 This option allows the NFS server to violate the NFS protocol and
198 reply to requests before any changes made by that request have been
199 committed to stable storage (e.g. disc drive).
200
201 Using this option usually improves performance, but at the cost that
202 an unclean server restart (i.e. a crash) can cause data to be lost or
203 corrupted.
204
205 .TP
206 .IR sync
207 Reply to requests only after the changes have been committed to stable
208 storage (see
209 .IR async
210 above).
211
212 In releases of nfs-utils up to and including 1.0.0, the
213 .I async
214 option was the
215 default. In all releases after 1.0.0,
216 .I sync
217 is the default, and
218 .I async
219 must be explicitly requested if needed.
220 .TP
221 .IR no_wdelay
222 This option has no effect if
223 .I async
224 is also set. The NFS server will normally delay committing a write request
225 to disc slightly if it suspects that another related write request may be in
226 progress or may arrive soon. This allows multiple write requests to
227 be committed to disc with the one operation which can improve
228 performance. If an NFS server received mainly small unrelated
229 requests, this behaviour could actually reduce performance, so
230 .IR no_wdelay
231 is available to turn it off.
232 The default can be explicitly requested with the
233 .IR wdelay " option.
234 .TP
235 .IR nohide
236 This option is based on the option of the same name provided in IRIX
237 NFS. Normally, if a server exports two filesystems one of which is
238 mounted on the other, then the client will have to mount both
239 filesystems explicitly to get access to them. If it just mounts the
240 parent, it will see an empty directory at the place where the other
241 filesystem is mounted. That filesystem is "hidden".
242
243 Setting the
244 .I nohide
245 option on a filesystem causes it not to be hidden, and an
246 appropriately authorised client will be able to move from the parent to
247 that filesystem without noticing the change.
248
249 However, some NFS clients do not cope well with this situation as, for
250 instance, it is then possible for two files in the one apparent
251 filesystem to have the same inode number.
252
253 The
254 .I nohide
255 option is currently only effective on
256 .I "single host
257 exports. It does not work reliably with netgroup, subnet, or wildcard
258 exports.
259
260 This option can be very useful in some situations, but it should be
261 used with due care, and only after confirming that the client system
262 copes with the situation effectively.
263
264 The option can be explicitly disabled for NFSv2 and NFSv3 with
265 .IR hide .
266
267 This option is not relevant when NFSv4 is use. NFSv4 never hides
268 subordinate filesystems. Any filesystem that is exported will be
269 visible where expected when using NFSv4.
270 .TP
271 .I crossmnt
272 This option is similar to
273 .I nohide
274 but it makes it possible for clients to access all filesystems mounted
275 on a filesystem marked with
276 .IR crossmnt .
277 Thus when a child filesystem "B" is mounted on a parent "A", setting
278 crossmnt on "A" has a similar effect to setting "nohide" on B.
279
280 With
281 .I nohide
282 the child filesystem needs to be explicitly exported. With
283 .I crossmnt
284 it need not. If a child of a
285 .I crossmnt
286 file is not explicitly exported, then it will be implicitly exported
287 with the same export options as the parent, except for
288 .IR fsid= .
289 This makes it impossible to
290 .B not
291 export a child of a
292 .I crossmnt
293 filesystem. If some but not all subordinate filesystems of a parent
294 are to be exported, then they must be explicitly exported and the
295 parent should not have
296 .I crossmnt
297 set.
298
299 The
300 .I nocrossmnt
301 option can explicitly disable
302 .I crossmnt
303 if it was previously set. This is rarely useful.
304 .TP
305 .IR subtree_check
306 This option enables subtree checking, which can have mild security
307 benefits, but can decrease reliability in some circumstances.
308
309 If a subdirectory of a filesystem is exported, but the whole
310 filesystem isn't then whenever a NFS request arrives, the server must
311 check not only that the accessed file is in the appropriate filesystem
312 (which is easy) but also that it is in the exported tree (which is
313 harder). This check is called the
314 .IR subtree_check .
315
316 In order to perform this check, the server must include some
317 information about the location of the file in the "filehandle" that is
318 given to the client. This can cause problems with accessing files that
319 are renamed while a client has them open (though in many simple cases
320 it will still work).
321
322 subtree checking is also used to make sure that files inside
323 directories to which only root has access can only be accessed if the
324 filesystem is exported with
325 .I no_root_squash
326 (see below), even if the file itself allows more general access.
327
328 For more information about the security implications, refer to the
329 Subdirectory Exports section.
330
331 As a general guide, a home directory filesystem, which is normally
332 exported at the root and may see lots of file renames, should be
333 exported with subtree checking disabled. A filesystem which is mostly
334 readonly, and at least doesn't see many file renames (e.g. /usr or
335 /var) and for which subdirectories may be exported, should probably be
336 exported with subtree checks enabled.
337
338 The default of having subtree checks disabled, can be explicitly
339 requested with
340 .IR no_subtree_check .
341
342 Before release 1.1.0 of nfs-utils, the default was
343 .IR subtree_check .
344 Since release 1.1.0, the default is
345 .I no_subtree_check
346 as subtree checking tends to cause more problems than it is worth.
347 If you genuinely require subtree checking, you should explicitly put
348 that option in the
349 .B exports
350 file. If you put neither option,
351 .B exportfs
352 will warn you that the change has occurred.
353
354 .TP
355 .IR insecure_locks
356 .TP
357 .IR no_auth_nlm
358 This option (the two names are synonymous) tells the NFS server not to require authentication of
359 locking requests (i.e. requests which use the NLM protocol). Normally
360 the NFS server will require a lock request to hold a credential for a
361 user who has read access to the file. With this flag no access checks
362 will be performed.
363
364 Early NFS client implementations did not send credentials with lock
365 requests, and many current NFS clients still exist which are based on
366 the old implementations. Use this flag if you find that you can only
367 lock files which are world readable.
368
369 The default behaviour of requiring authentication for NLM requests can
370 be explicitly requested with either of the synonymous
371 .IR auth_nlm ,
372 or
373 .IR secure_locks .
374 .\".TP
375 .\".I noaccess
376 .\"This makes everything below the directory inaccessible for the named
377 .\"client. This is useful when you want to export a directory hierarchy to
378 .\"a client, but exclude certain subdirectories. The client's view of a
379 .\"directory flagged with noaccess is very limited; it is allowed to read
380 .\"its attributes, and lookup `.' and `..'. These are also the only entries
381 .\"returned by a readdir.
382 .\".TP
383 .\".IR link_relative
384 .\"Convert absolute symbolic links (where the link contents start with a
385 .\"slash) into relative links by prepending the necessary number of ../'s
386 .\"to get from the directory containing the link to the root on the
387 .\"server. This has subtle, perhaps questionable, semantics when the file
388 .\"hierarchy is not mounted at its root.
389 .\".TP
390 .\".IR link_absolute
391 .\"Leave all symbolic link as they are. This is the default operation.
392
393 .TP
394 .IR mountpoint= path
395 .TP
396 .I mp
397 This option makes it possible to only export a directory if it has
398 successfully been mounted.
399 If no path is given (e.g.
400 .IR mountpoint " or " mp )
401 then the export point must also be a mount point. If it isn't then
402 the export point is not exported. This allows you to be sure that the
403 directory underneath a mountpoint will never be exported by accident
404 if, for example, the filesystem failed to mount due to a disc error.
405
406 If a path is given (e.g.
407 .IR mountpoint= "/path or " mp= /path)
408 then the nominated path must be a mountpoint for the exportpoint to be
409 exported.
410
411 .TP
412 .IR fsid= num|root|uuid
413 NFS needs to be able to identify each filesystem that it exports.
414 Normally it will use a UUID for the filesystem (if the filesystem has
415 such a thing) or the device number of the device holding the
416 filesystem (if the filesystem is stored on the device).
417
418 As not all filesystems are stored on devices, and not all filesystems
419 have UUIDs, it is sometimes necessary to explicitly tell NFS how to
420 identify a filesystem. This is done with the
421 .I fsid=
422 option.
423
424 For NFSv4, there is a distinguished filesystem which is the root of
425 all exported filesystem. This is specified with
426 .I fsid=root
427 or
428 .I fsid=0
429 both of which mean exactly the same thing.
430
431 Other filesystems can be identified with a small integer, or a UUID
432 which should contain 32 hex digits and arbitrary punctuation.
433
434 Linux kernels version 2.6.20 and earlier do not understand the UUID
435 setting so a small integer must be used if an fsid option needs to be
436 set for such kernels. Setting both a small number and a UUID is
437 supported so the same configuration can be made to work on old and new
438 kernels alike.
439
440 .TP
441 .IR nordirplus
442 This option will disable READDIRPLUS request handling. When set,
443 READDIRPLUS requests from NFS clients return NFS3ERR_NOTSUPP, and
444 clients fall back on READDIR. This option affects only NFSv3 clients.
445 .TP
446 .IR refer= path@host[+host][:path@host[+host]]
447 A client referencing the export point will be directed to choose from
448 the given list an alternative location for the filesystem.
449 (Note that the server must have a mountpoint here, though a different
450 filesystem is not required; so, for example,
451 .IR "mount --bind" " /path /path"
452 is sufficient.)
453
454 This option affects only NFSv4 clients. Other clients will ignore
455 all "refer=" parts.
456 .TP
457 .IR replicas= path@host[+host][:path@host[+host]]
458 If the client asks for alternative locations for the export point, it
459 will be given this list of alternatives. (Note that actual replication
460 of the filesystem must be handled elsewhere.)
461
462 .TP
463 .IR pnfs
464 This option enables the use of the pNFS extension if the protocol level
465 is NFSv4.1 or higher, and the filesystem supports pNFS exports. With
466 pNFS clients can bypass the server and perform I/O directly to storage
467 devices. The default can be explicitly requested with the
468 .I no_pnfs
469 option.
470
471 .TP
472 .IR security_label
473 With this option set, clients using NFSv4.2 or higher will be able to
474 set and retrieve security labels (such as those used by SELinux). This
475 will only work if all clients use a consistent security policy. Note
476 that early kernels did not support this export option, and instead
477 enabled security labels by default.
478
479 .TP
480 .IR reexport= auto-fsidnum|predefined-fsidnum
481 This option helps when a NFS share is re-exported. Since the NFS server
482 needs a unique identifier for each exported filesystem and a NFS share
483 cannot provide such, usually a manual fsid is needed.
484 As soon
485 .IR crossmnt
486 is used manually assigning fsid won't work anymore. This is where this
487 option becomes handy. It will automatically assign a numerical fsid
488 to exported NFS shares. The fsid and path relations are stored in a SQLite
489 database. If
490 .IR auto-fsidnum
491 is selected, the fsid is also autmatically allocated.
492 .IR predefined-fsidnum
493 assumes pre-allocated fsid numbers and will just look them up.
494 This option depends also on the kernel, you will need at least kernel version
495 5.19.
496 Since
497 .IR reexport=
498 can automatically allocate and assign numerical fsids, it is no longer possible
499 to have numerical fsids in other exports as soon this option is used in at least
500 one export entry.
501
502 The association between fsid numbers and paths is stored in a SQLite database.
503 Don't edit or remove the database unless you know exactly what you're doing.
504 .IR predefined-fsidnum
505 is useful when you have used
506 .IR auto-fsidnum
507 before and don't want further entries stored.
508
509
510 .SS User ID Mapping
511 .PP
512 .B nfsd
513 bases its access control to files on the server machine on the uid and
514 gid provided in each NFS RPC request. The normal behavior a user would
515 expect is that she can access her files on the server just as she would
516 on a normal file system. This requires that the same uids and gids are
517 used on the client and the server machine. This is not always true, nor
518 is it always desirable.
519 .PP
520 Very often, it is not desirable that the root user on a client machine
521 is also treated as root when accessing files on the NFS server. To this
522 end, uid 0 is normally mapped to a different id: the so-called
523 anonymous or
524 .I nobody
525 uid. This mode of operation (called `root squashing') is the default,
526 and can be turned off with
527 .IR no_root_squash .
528 .PP
529 By default,
530 .\".B nfsd
531 .\"tries to obtain the anonymous uid and gid by looking up user
532 .\".I nobody
533 .\"in the password file at startup time. If it isn't found, a uid and gid
534 .B exportfs
535 chooses a uid and gid
536 of 65534 for squashed access. These values can also be overridden by
537 the
538 .IR anonuid " and " anongid
539 options.
540 .\".PP
541 .\"In addition to this,
542 .\".B nfsd
543 .\"lets you specify arbitrary uids and gids that should be mapped to user
544 .\"nobody as well.
545 Finally, you can map all user requests to the
546 anonymous uid by specifying the
547 .IR all_squash " option.
548 .PP
549 Here's the complete list of mapping options:
550 .TP
551 .IR root_squash
552 Map requests from uid/gid 0 to the anonymous uid/gid. Note that this does
553 not apply to any other uids or gids that might be equally sensitive, such as
554 user
555 .IR bin
556 or group
557 .IR staff .
558 .TP
559 .IR no_root_squash
560 Turn off root squashing. This option is mainly useful for diskless clients.
561 .TP
562 .IR all_squash
563 Map all uids and gids to the anonymous user. Useful for NFS-exported
564 public FTP directories, news spool directories, etc. The opposite option
565 is
566 .IR no_all_squash ,
567 which is the default setting.
568 .TP
569 .IR anonuid " and " anongid
570 These options explicitly set the uid and gid of the anonymous account.
571 This option is primarily useful for PC/NFS clients, where you might want
572 all requests appear to be from one user. As an example, consider the
573 export entry for
574 .B /home/joe
575 in the example section below, which maps all requests to uid 150 (which
576 is supposedly that of user joe).
577
578 .SS Subdirectory Exports
579
580 Normally you should only export only the root of a filesystem. The NFS
581 server will also allow you to export a subdirectory of a filesystem,
582 however, this has drawbacks:
583
584 First, it may be possible for a malicious user to access files on the
585 filesystem outside of the exported subdirectory, by guessing filehandles
586 for those other files.
587 In some cases a malicious user may also be able to access files on other
588 filesystems that have not been exported by replacing the exported
589 subdirectory with a symbolic link to any other directory.
590 The only way to prevent this is by using the
591 .IR subtree_check
592 option, which can cause other problems.
593
594 Second, export options may not be enforced in the way that you would
595 expect. For example, the
596 .IR security_label
597 option will not work on subdirectory exports, and if nested subdirectory
598 exports change the
599 .IR security_label
600 or
601 .IR sec=
602 options, NFSv4 clients will normally see only the options on the parent
603 export. Also, where security options differ, a malicious client may use
604 filehandle-guessing attacks to access the files from one subdirectory
605 using the options from another.
606
607
608 .SS Extra Export Tables
609 After reading
610 .I /etc/exports
611 .B exportfs
612 reads files in the
613 .I /etc/exports.d
614 directory as extra export tables. Only files ending in
615 .I .exports
616 are considered. Files beginning with a dot are ignored.
617 The format for extra export tables is the same as
618 .I /etc/exports
619 .
620 .IP
621 .SH EXAMPLE
622 .PP
623 .nf
624 .ta +3i
625 # sample /etc/exports file
626 / master(rw) trusty(rw,no_root_squash)
627 /projects proj*.local.domain(rw)
628 /usr *.local.domain(ro) @trusted(rw)
629 /home/joe pc001(rw,all_squash,anonuid=150,anongid=100)
630 /pub *(ro,insecure,all_squash)
631 /srv/www \-sync,rw server @trusted @external(ro)
632 /foo 2001:db8:9:e54::/64(rw) 192.0.2.0/24(rw)
633 /build buildhost[0-9].local.domain(rw)
634 .\"/pub/private (noaccess)
635 .fi
636 .PP
637 The first line exports the entire filesystem to machines master and trusty.
638 In addition to write access, all uid squashing is turned off for host
639 trusty. The second and third entry show examples for wildcard hostnames
640 and netgroups (this is the entry `@trusted'). The fourth line shows the
641 entry for the PC/NFS client discussed above. Line 5 exports the
642 public FTP directory to every host in the world, executing all requests
643 under the nobody account. The
644 .I insecure
645 option in this entry also allows clients with NFS implementations that
646 don't use a reserved port for NFS.
647 The sixth line exports a directory read-write to the machine 'server'
648 as well as the `@trusted' netgroup, and read-only to netgroup `@external',
649 all three mounts with the `sync' option enabled. The seventh line exports
650 a directory to both an IPv6 and an IPv4 subnet. The eighth line demonstrates
651 a character class wildcard match.
652 .\" The last line denies all NFS clients
653 .\"access to the private directory.
654 .\".SH CAVEATS
655 .\"Unlike other NFS server implementations, this
656 .\".B nfsd
657 .\"allows you to export both a directory and a subdirectory thereof to
658 .\"the same host, for instance
659 .\".IR /usr " and " /usr/X11R6 .
660 .\"In this case, the mount options of the most specific entry apply. For
661 .\"instance, when a user on the client host accesses a file in
662 .\".IR /usr/X11R6 ,
663 .\"the mount options given in the
664 .\".I /usr/X11R6
665 .\"entry apply. This is also true when the latter is a wildcard or netgroup
666 .\"entry.
667 .SH FILES
668 /etc/exports
669 /etc/exports.d
670 .SH SEE ALSO
671 .BR exportfs (8),
672 .BR netgroup (5),
673 .BR mountd (8),
674 .BR nfsd (8),
675 .BR showmount (8),
676 .BR tlshd (8).
677 .\".SH DIAGNOSTICS
678 .\"An error parsing the file is reported using syslogd(8) as level NOTICE from
679 .\"a DAEMON whenever
680 .\".BR nfsd (8)
681 .\"or
682 .\".BR mountd (8)
683 .\"is started up. Any unknown
684 .\"host is reported at that time, but often not all hosts are not yet known
685 .\"to
686 .\".BR named (8)
687 .\"at boot time, thus as hosts are found they are reported
688 .\"with the same
689 .\".BR syslogd (8)
690 .\"parameters.