Debian Codegraph @

prog/init/lm_sensors.init

raw
1 #!/bin/sh
2 #
3 # chkconfig: - 26 74
4 # description: sensors is used for monitoring motherboard sensor values.
5 # config: /etc/sysconfig/lm_sensors
6 #
7 # This program is free software; you can redistribute it and/or modify
8 # it under the terms of the GNU General Public License as published by
9 # the Free Software Foundation; either version 2 of the License, or
10 # (at your option) any later version.
11 #
12 # This program is distributed in the hope that it will be useful,
13 # but WITHOUT ANY WARRANTY; without even the implied warranty of
14 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 # GNU General Public License for more details.
16 #
17 # You should have received a copy of the GNU General Public License
18 # along with this program; if not, write to the Free Software
19 # Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
20 # MA 02110-1301 USA.
21
22 # See also the lm_sensors homepage at:
23 # https://hwmon.wiki.kernel.org/lm_sensors
24
25 # It uses a config file /etc/sysconfig/lm_sensors that contains the modules
26 # to be loaded/unloaded. That file is sourced into this one.
27
28 # The format of this file is a shell script that simply defines variables:
29 # HWMON_MODULES for hardware monitoring driver modules, and optionally
30 # BUS_MODULES for any required bus driver module (for example for I2C or SPI).
31
32 PSENSORS=/usr/local/bin/sensors
33
34 if [ ! -x $PSENSORS ]; then
35 PSENSORS=/usr/bin/sensors
36 fi
37
38 # Source function library.
39 . /etc/init.d/functions
40
41 RETVAL=0
42 prog="lm_sensors"
43
44 # This functions checks if sensor support is compiled into the kernel, if
45 # sensors are configured, and loads the config file
46 check_sensors() {
47 CONFIG=/etc/sysconfig/lm_sensors
48 if ! [ -r "$CONFIG" ] || ! grep '^HWMON_MODULES' $CONFIG >/dev/null 2>&1; then
49 echo -n "$1 $prog: not configured, run sensors-detect"
50 echo_warning
51 echo
52 exit 6
53 fi
54
55 # Load config file
56 . "$CONFIG"
57 }
58
59 start() {
60 check_sensors "Starting"
61
62 echo -n "Starting $prog: loading module "
63
64 for module in $BUS_MODULES $HWMON_MODULES ; do
65 echo -n "${module} "
66 /sbin/modprobe $module >/dev/null 2>&1
67 done
68 $PSENSORS -s
69
70 RETVAL=$?
71 if [ $RETVAL -eq 0 ] && touch /var/lock/subsys/lm_sensors ; then
72 echo_success
73 echo
74 else
75 echo_failure
76 echo
77 fi
78 }
79
80 stop() {
81 check_sensors "Stopping"
82
83 echo -n "Stopping $prog: "
84
85 for module in $HWMON_MODULES $BUS_MODULES ; do
86 /sbin/modprobe -r $module >/dev/null 2>&1
87 done
88
89 RETVAL=$?
90 if [ $RETVAL -eq 0 ] && rm -f /var/lock/subsys/lm_sensors ; then
91 echo_success
92 echo
93 else
94 echo_failure
95 echo
96 fi
97 }
98
99 dostatus() {
100 $PSENSORS
101 RETVAL=$?
102 if [ $RETVAL -ne 0 ]; then
103 RETVAL=3
104 fi
105 }
106
107 restart() {
108 stop
109 start
110 }
111
112 condrestart() {
113 [ -e /var/lock/subsys/lm_sensors ] && restart || :
114 }
115
116 # See how we were called.
117 case "$1" in
118 start)
119 start
120 ;;
121 stop)
122 stop
123 ;;
124 status)
125 dostatus
126 ;;
127 restart|reload)
128 restart
129 ;;
130 condrestart)
131 condrestart
132 ;;
133 *)
134 echo "Usage: $0 {start|stop|status|restart|reload|condrestart}"
135 exit 3
136 esac
137
138 exit $RETVAL