| 1 |
This directory contains files useful for initialization |
| 2 |
scripts, especially for RedHat. |
| 3 |
|
| 4 |
There are two choices, lm_sensors.init and sensord.init. |
| 5 |
Use one or the other but not both! |
| 6 |
|
| 7 |
---------------- |
| 8 |
|
| 9 |
The script lm_sensors.init is a nice startup/shutdown script. |
| 10 |
On RH and other RH-based systems (MDK, notably) use this sort of startup |
| 11 |
mechanism (i.e. SVR4-based), as opposed to the everything-in-one-script |
| 12 |
(/etc/rc or /etc/rc.local) like the BSD-based systems do. |
| 13 |
The lm_sensors.init file should be copied to /etc/rc.d/init.d/lm_sensors. |
| 14 |
For more information see the top of the file. |
| 15 |
It requires the /etc/sysconfig/lm_sensors file, which identifies |
| 16 |
the correct modules. |
| 17 |
|
| 18 |
The /etc/sysconfig/lm_sensors file is generated by running sensors-detect. |
| 19 |
Once the script is done detecting the hardware monitoring devices, it will |
| 20 |
list all the required modules in that file, so that they can be loaded |
| 21 |
automatically at boot time. |
| 22 |
|
| 23 |
---------------- |
| 24 |
|
| 25 |
The script sensord.init also loads the modules, and then |
| 26 |
starts the sensord daemon. See the manual page sensord(8) for |
| 27 |
more information on the daemon. |
| 28 |
|
| 29 |
The sensord.init file should be copied to /etc/rc.d/init.d/sensord. |
| 30 |
For more information see the top of the file. |
| 31 |
|
| 32 |
To configure this service one should put appropriate "alias i2c-bus-0 xxx" |
| 33 |
and "alias i2c-sensors-chip-0 xxx" in /etc/modules.conf. |