Debian Codegraph @

doc/vid

raw
1 VID pin settings
2 --------------------
3
4 The VID (Voltage Identification) pins on sensor chips
5 are used to read the CPU Core voltage setting.
6
7 The VID setting can be controlled by jumpers on the board,
8 or, in newer motherboards, by settings in the BIOS.
9 On these newer boards, the BIOS programs some device's
10 pins which in turn controls a DC-DC Converter to set its
11 output to a certain voltage. These pins are also connected to
12 the sensor chip so that the VID setting can be read back
13 by applications.
14
15 There are between 4 and 8 VID pins (the more recent the CPU, the more
16 numerous the VID pins.) The VID codes are defined by Intel in documents
17 titled "VRM X.X DC-DC Converter Design Guidelines".
18 (VRM = Voltage Regulator Module), or
19 "Voltage Regulator-Down (VRD) X.X Design Guide".
20 These documents are available at http://developer.intel.com.
21 There are equivalent documents for AMD processors (look for a table
22 named "VID Code Voltages" in processor specifications.)
23
24 There are several different VRM document versions.
25 The common versions are as follows:
26
27 Document Version Voltage Range Increment Processors
28 ---------------- ------------- --------- ----------
29 "2.4" 0.8 - 1.55 0.025V AMD Opteron 24x
30
31 8.2 (8.1, 8.3) 1.30 - 2.05V 0.05V PII, PIII, Celeron
32 2.1 - 3.5V 0.10V
33
34 8.4 1.30 - 2.05V 0.05V PIII, Celeron
35 4 pins only
36
37 8.5 1.050 - 1.825V 0.05V PIII-S Tualatin
38
39 9.0, (9.1) 1.100 - 1.850V 0.025V P4, AMD Socket A
40
41 10.0 0.8375 - 1.6000 0.0125V Desktop Socket 478
42
43
44 "2.4" is not an actual document version but simply a way to identify
45 AMD Opteron 24x processors.
46 Note that versions 8.1 - 8.4 are compatible.
47
48 Since Linux 2.6.9, the correct VRM version is selected automatically
49 based on the CPU brand and model. Thus you shouldn't have to care about
50 it. If you are using a brand new CPU and even the latest kernel complains
51 ("Unknown VRM version of your CPU"), this means that the kernel must be
52 taught about this new CPU model. Please report to us in this case.
53
54 Remember, the VID pins on the sensor chips are inputs only.
55 You cannot use them to manipulate the actual processor core voltage.
56
57 ------------------
58 Copyright (c) 2002-2004 Mark D. Studebaker