| 1 |
This is a list of additional programs, that may or may not be installed by |
| 2 |
`make install', and that can be found in the `prog' directory of |
| 3 |
this package. |
| 4 |
|
| 5 |
These programs are generally small utilities used for debugging, |
| 6 |
and installation of the lm_sensors package, and for demonstrating |
| 7 |
the use of the drivers and libraries in this package. |
| 8 |
For more elaborate programs (for example, GUI sensor displays), |
| 9 |
see https://github.com/lm-sensors/lm-sensors/ |
| 10 |
http://sensors-applet.sourceforge.net/ |
| 11 |
https://01.org/powertop/ |
| 12 |
https://wpitchoune.net/psensor/ |
| 13 |
https://amanusk.github.io/s-tui/ |
| 14 |
|
| 15 |
* prog/daemon/healthd.sh (written in bash, not installed) |
| 16 |
An example of a very simple hardware health monitoring daemon. |
| 17 |
|
| 18 |
* prog/detect/sensors-detect (written in Perl, installed by 'make install') |
| 19 |
This program tries to detect the available SMBus adapters and the chips |
| 20 |
connected to them, as well as Super-I/O and misc chips. It also generates |
| 21 |
modprobe lines and module options. This program is stand-alone (can be |
| 22 |
run without installing lm-sensors) and interactive. |
| 23 |
|
| 24 |
* prog/dump/isadump (written in C, installed by 'make install') |
| 25 |
This program dumps the registers of ISA or Super-I/O chips. |
| 26 |
Usual syntax: |
| 27 |
isadump 0x295 0x296 |
| 28 |
isadump -k 0x55 0x2e 0x2f |
| 29 |
|
| 30 |
* prog/hotplug/unhide_ICH_SMBus (shell script, not installed) |
| 31 |
It unhides the ICH Intel SMBus for kernel 2.6.5 and later. |
| 32 |
|
| 33 |
* prog/init/lm_sensors.init (shell script, not installed) |
| 34 |
A SysV init script to be installed in /etc/rc.d/init.d/ |
| 35 |
It inserts the bus and chip modules. |
| 36 |
|
| 37 |
* prog/init/sensord.init (shell script, not installed) |
| 38 |
A SysV init script to be installed in /etc/rc.d/init.d/ |
| 39 |
It inserts the bus and chip modules and starts the sensord daemon. |
| 40 |
|
| 41 |
* prog/pwm/pwmconfig (shell script, installed by 'make install') |
| 42 |
Formerly pwmtest, tests the pwm (pulse width modulation) outputs of sensors |
| 43 |
for their effect on the fans and helps to setup the configfile for fancontrol. |
| 44 |
|
| 45 |
* prog/pwm/fancontrol (shell script, installed by 'make install') |
| 46 |
Controls fanspeeds responding to changes on temperature sensors. |
| 47 |
Configuration through pwmconfig. |
| 48 |
|
| 49 |
* prog/rrd/sens_update_rrd (written in bash, not installed) |
| 50 |
This script gathers sensors data and adds it to a round robin database |
| 51 |
(RRD). RRD is then used to display the graphed data in web pages. |
| 52 |
See prog/rrd/README for more information. |
| 53 |
|
| 54 |
* prog/sensord/sensord (written in C, installed by `make install-prog-sensord') |
| 55 |
This daemon can be used to periodically log sensor readings from |
| 56 |
the sensors hardware to syslog, and to alert (using syslog level ALERT) |
| 57 |
when a sensor alarm is signalled; for example, if a fan fails, a temperature |
| 58 |
limit is exceeded, etc. |
| 59 |
|
| 60 |
* prog/sensors/sensors (written in C, installed by `make install') |
| 61 |
This pretty-prints the information provided by the modules. It is a normal |
| 62 |
console application, using stdout. It is essential, because |
| 63 |
unlike the raw sysfs files, it takes your configuration file into account. |
| 64 |
|
| 65 |
* prog/tellerstats/gather.sh, tellerstats.sh (written in bash, not installed) |
| 66 |
These scripts gather sensors data and graph the data for web pages. |
| 67 |
See prog/tellerstats/README for more information. |