| 1 |
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
| 2 |
MOTOROLA MICROPROCESSOR & MEMORY TECHNOLOGY GROUP |
| 3 |
M68000 Hi-Performance Microprocessor Division |
| 4 |
M68060 Software Package |
| 5 |
Production Release P1.00 -- October 10, 1994 |
| 6 |
|
| 7 |
M68060 Software Package Copyright © 1993, 1994 Motorola Inc. All rights reserved. |
| 8 |
|
| 9 |
THE SOFTWARE is provided on an "AS IS" basis and without warranty. |
| 10 |
To the maximum extent permitted by applicable law, |
| 11 |
MOTOROLA DISCLAIMS ALL WARRANTIES WHETHER EXPRESS OR IMPLIED, |
| 12 |
INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE |
| 13 |
and any warranty against infringement with regard to the SOFTWARE |
| 14 |
(INCLUDING ANY MODIFIED VERSIONS THEREOF) and any accompanying written materials. |
| 15 |
|
| 16 |
To the maximum extent permitted by applicable law, |
| 17 |
IN NO EVENT SHALL MOTOROLA BE LIABLE FOR ANY DAMAGES WHATSOEVER |
| 18 |
(INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS, |
| 19 |
BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, OR OTHER PECUNIARY LOSS) |
| 20 |
ARISING OF THE USE OR INABILITY TO USE THE SOFTWARE. |
| 21 |
Motorola assumes no responsibility for the maintenance and support of the SOFTWARE. |
| 22 |
|
| 23 |
You are hereby granted a copyright license to use, modify, and distribute the SOFTWARE |
| 24 |
so long as this entire notice is retained without alteration in any modified and/or |
| 25 |
redistributed versions, and that such modified versions are clearly identified as such. |
| 26 |
No licenses are granted by implication, estoppel or otherwise under any patents |
| 27 |
or trademarks of Motorola, Inc. |
| 28 |
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
| 29 |
# freal.s: |
| 30 |
# This file is appended to the top of the 060FPSP package |
| 31 |
# and contains the entry points into the package. The user, in |
| 32 |
# effect, branches to one of the branch table entries located |
| 33 |
# after _060FPSP_TABLE. |
| 34 |
# Also, subroutine stubs exist in this file (_fpsp_done for |
| 35 |
# example) that are referenced by the FPSP package itself in order |
| 36 |
# to call a given routine. The stub routine actually performs the |
| 37 |
# callout. The FPSP code does a "bsr" to the stub routine. This |
| 38 |
# extra layer of hierarchy adds a slight performance penalty but |
| 39 |
# it makes the FPSP code easier to read and more mainatinable. |
| 40 |
# |
| 41 |
|
| 42 |
set _off_bsun, 0x00 |
| 43 |
set _off_snan, 0x04 |
| 44 |
set _off_operr, 0x08 |
| 45 |
set _off_ovfl, 0x0c |
| 46 |
set _off_unfl, 0x10 |
| 47 |
set _off_dz, 0x14 |
| 48 |
set _off_inex, 0x18 |
| 49 |
set _off_fline, 0x1c |
| 50 |
set _off_fpu_dis, 0x20 |
| 51 |
set _off_trap, 0x24 |
| 52 |
set _off_trace, 0x28 |
| 53 |
set _off_access, 0x2c |
| 54 |
set _off_done, 0x30 |
| 55 |
|
| 56 |
set _off_imr, 0x40 |
| 57 |
set _off_dmr, 0x44 |
| 58 |
set _off_dmw, 0x48 |
| 59 |
set _off_irw, 0x4c |
| 60 |
set _off_irl, 0x50 |
| 61 |
set _off_drb, 0x54 |
| 62 |
set _off_drw, 0x58 |
| 63 |
set _off_drl, 0x5c |
| 64 |
set _off_dwb, 0x60 |
| 65 |
set _off_dww, 0x64 |
| 66 |
set _off_dwl, 0x68 |
| 67 |
|
| 68 |
_060FPSP_TABLE: |
| 69 |
|
| 70 |
############################################################### |
| 71 |
|
| 72 |
# Here's the table of ENTRY POINTS for those linking the package. |
| 73 |
bra.l _fpsp_snan |
| 74 |
short 0x0000 |
| 75 |
bra.l _fpsp_operr |
| 76 |
short 0x0000 |
| 77 |
bra.l _fpsp_ovfl |
| 78 |
short 0x0000 |
| 79 |
bra.l _fpsp_unfl |
| 80 |
short 0x0000 |
| 81 |
bra.l _fpsp_dz |
| 82 |
short 0x0000 |
| 83 |
bra.l _fpsp_inex |
| 84 |
short 0x0000 |
| 85 |
bra.l _fpsp_fline |
| 86 |
short 0x0000 |
| 87 |
bra.l _fpsp_unsupp |
| 88 |
short 0x0000 |
| 89 |
bra.l _fpsp_effadd |
| 90 |
short 0x0000 |
| 91 |
|
| 92 |
space 56 |
| 93 |
|
| 94 |
############################################################### |
| 95 |
global _fpsp_done |
| 96 |
_fpsp_done: |
| 97 |
mov.l %d0,-(%sp) |
| 98 |
mov.l (_060FPSP_TABLE-0x80+_off_done,%pc),%d0 |
| 99 |
pea.l (_060FPSP_TABLE-0x80,%pc,%d0) |
| 100 |
mov.l 0x4(%sp),%d0 |
| 101 |
rtd &0x4 |
| 102 |
|
| 103 |
global _real_ovfl |
| 104 |
_real_ovfl: |
| 105 |
mov.l %d0,-(%sp) |
| 106 |
mov.l (_060FPSP_TABLE-0x80+_off_ovfl,%pc),%d0 |
| 107 |
pea.l (_060FPSP_TABLE-0x80,%pc,%d0) |
| 108 |
mov.l 0x4(%sp),%d0 |
| 109 |
rtd &0x4 |
| 110 |
|
| 111 |
global _real_unfl |
| 112 |
_real_unfl: |
| 113 |
mov.l %d0,-(%sp) |
| 114 |
mov.l (_060FPSP_TABLE-0x80+_off_unfl,%pc),%d0 |
| 115 |
pea.l (_060FPSP_TABLE-0x80,%pc,%d0) |
| 116 |
mov.l 0x4(%sp),%d0 |
| 117 |
rtd &0x4 |
| 118 |
|
| 119 |
global _real_inex |
| 120 |
_real_inex: |
| 121 |
mov.l %d0,-(%sp) |
| 122 |
mov.l (_060FPSP_TABLE-0x80+_off_inex,%pc),%d0 |
| 123 |
pea.l (_060FPSP_TABLE-0x80,%pc,%d0) |
| 124 |
mov.l 0x4(%sp),%d0 |
| 125 |
rtd &0x4 |
| 126 |
|
| 127 |
global _real_bsun |
| 128 |
_real_bsun: |
| 129 |
mov.l %d0,-(%sp) |
| 130 |
mov.l (_060FPSP_TABLE-0x80+_off_bsun,%pc),%d0 |
| 131 |
pea.l (_060FPSP_TABLE-0x80,%pc,%d0) |
| 132 |
mov.l 0x4(%sp),%d0 |
| 133 |
rtd &0x4 |
| 134 |
|
| 135 |
global _real_operr |
| 136 |
_real_operr: |
| 137 |
mov.l %d0,-(%sp) |
| 138 |
mov.l (_060FPSP_TABLE-0x80+_off_operr,%pc),%d0 |
| 139 |
pea.l (_060FPSP_TABLE-0x80,%pc,%d0) |
| 140 |
mov.l 0x4(%sp),%d0 |
| 141 |
rtd &0x4 |
| 142 |
|
| 143 |
global _real_snan |
| 144 |
_real_snan: |
| 145 |
mov.l %d0,-(%sp) |
| 146 |
mov.l (_060FPSP_TABLE-0x80+_off_snan,%pc),%d0 |
| 147 |
pea.l (_060FPSP_TABLE-0x80,%pc,%d0) |
| 148 |
mov.l 0x4(%sp),%d0 |
| 149 |
rtd &0x4 |
| 150 |
|
| 151 |
global _real_dz |
| 152 |
_real_dz: |
| 153 |
mov.l %d0,-(%sp) |
| 154 |
mov.l (_060FPSP_TABLE-0x80+_off_dz,%pc),%d0 |
| 155 |
pea.l (_060FPSP_TABLE-0x80,%pc,%d0) |
| 156 |
mov.l 0x4(%sp),%d0 |
| 157 |
rtd &0x4 |
| 158 |
|
| 159 |
global _real_fline |
| 160 |
_real_fline: |
| 161 |
mov.l %d0,-(%sp) |
| 162 |
mov.l (_060FPSP_TABLE-0x80+_off_fline,%pc),%d0 |
| 163 |
pea.l (_060FPSP_TABLE-0x80,%pc,%d0) |
| 164 |
mov.l 0x4(%sp),%d0 |
| 165 |
rtd &0x4 |
| 166 |
|
| 167 |
global _real_fpu_disabled |
| 168 |
_real_fpu_disabled: |
| 169 |
mov.l %d0,-(%sp) |
| 170 |
mov.l (_060FPSP_TABLE-0x80+_off_fpu_dis,%pc),%d0 |
| 171 |
pea.l (_060FPSP_TABLE-0x80,%pc,%d0) |
| 172 |
mov.l 0x4(%sp),%d0 |
| 173 |
rtd &0x4 |
| 174 |
|
| 175 |
global _real_trap |
| 176 |
_real_trap: |
| 177 |
mov.l %d0,-(%sp) |
| 178 |
mov.l (_060FPSP_TABLE-0x80+_off_trap,%pc),%d0 |
| 179 |
pea.l (_060FPSP_TABLE-0x80,%pc,%d0) |
| 180 |
mov.l 0x4(%sp),%d0 |
| 181 |
rtd &0x4 |
| 182 |
|
| 183 |
global _real_trace |
| 184 |
_real_trace: |
| 185 |
mov.l %d0,-(%sp) |
| 186 |
mov.l (_060FPSP_TABLE-0x80+_off_trace,%pc),%d0 |
| 187 |
pea.l (_060FPSP_TABLE-0x80,%pc,%d0) |
| 188 |
mov.l 0x4(%sp),%d0 |
| 189 |
rtd &0x4 |
| 190 |
|
| 191 |
global _real_access |
| 192 |
_real_access: |
| 193 |
mov.l %d0,-(%sp) |
| 194 |
mov.l (_060FPSP_TABLE-0x80+_off_access,%pc),%d0 |
| 195 |
pea.l (_060FPSP_TABLE-0x80,%pc,%d0) |
| 196 |
mov.l 0x4(%sp),%d0 |
| 197 |
rtd &0x4 |
| 198 |
|
| 199 |
####################################### |
| 200 |
|
| 201 |
global _imem_read |
| 202 |
_imem_read: |
| 203 |
mov.l %d0,-(%sp) |
| 204 |
mov.l (_060FPSP_TABLE-0x80+_off_imr,%pc),%d0 |
| 205 |
pea.l (_060FPSP_TABLE-0x80,%pc,%d0) |
| 206 |
mov.l 0x4(%sp),%d0 |
| 207 |
rtd &0x4 |
| 208 |
|
| 209 |
global _dmem_read |
| 210 |
_dmem_read: |
| 211 |
mov.l %d0,-(%sp) |
| 212 |
mov.l (_060FPSP_TABLE-0x80+_off_dmr,%pc),%d0 |
| 213 |
pea.l (_060FPSP_TABLE-0x80,%pc,%d0) |
| 214 |
mov.l 0x4(%sp),%d0 |
| 215 |
rtd &0x4 |
| 216 |
|
| 217 |
global _dmem_write |
| 218 |
_dmem_write: |
| 219 |
mov.l %d0,-(%sp) |
| 220 |
mov.l (_060FPSP_TABLE-0x80+_off_dmw,%pc),%d0 |
| 221 |
pea.l (_060FPSP_TABLE-0x80,%pc,%d0) |
| 222 |
mov.l 0x4(%sp),%d0 |
| 223 |
rtd &0x4 |
| 224 |
|
| 225 |
global _imem_read_word |
| 226 |
_imem_read_word: |
| 227 |
mov.l %d0,-(%sp) |
| 228 |
mov.l (_060FPSP_TABLE-0x80+_off_irw,%pc),%d0 |
| 229 |
pea.l (_060FPSP_TABLE-0x80,%pc,%d0) |
| 230 |
mov.l 0x4(%sp),%d0 |
| 231 |
rtd &0x4 |
| 232 |
|
| 233 |
global _imem_read_long |
| 234 |
_imem_read_long: |
| 235 |
mov.l %d0,-(%sp) |
| 236 |
mov.l (_060FPSP_TABLE-0x80+_off_irl,%pc),%d0 |
| 237 |
pea.l (_060FPSP_TABLE-0x80,%pc,%d0) |
| 238 |
mov.l 0x4(%sp),%d0 |
| 239 |
rtd &0x4 |
| 240 |
|
| 241 |
global _dmem_read_byte |
| 242 |
_dmem_read_byte: |
| 243 |
mov.l %d0,-(%sp) |
| 244 |
mov.l (_060FPSP_TABLE-0x80+_off_drb,%pc),%d0 |
| 245 |
pea.l (_060FPSP_TABLE-0x80,%pc,%d0) |
| 246 |
mov.l 0x4(%sp),%d0 |
| 247 |
rtd &0x4 |
| 248 |
|
| 249 |
global _dmem_read_word |
| 250 |
_dmem_read_word: |
| 251 |
mov.l %d0,-(%sp) |
| 252 |
mov.l (_060FPSP_TABLE-0x80+_off_drw,%pc),%d0 |
| 253 |
pea.l (_060FPSP_TABLE-0x80,%pc,%d0) |
| 254 |
mov.l 0x4(%sp),%d0 |
| 255 |
rtd &0x4 |
| 256 |
|
| 257 |
global _dmem_read_long |
| 258 |
_dmem_read_long: |
| 259 |
mov.l %d0,-(%sp) |
| 260 |
mov.l (_060FPSP_TABLE-0x80+_off_drl,%pc),%d0 |
| 261 |
pea.l (_060FPSP_TABLE-0x80,%pc,%d0) |
| 262 |
mov.l 0x4(%sp),%d0 |
| 263 |
rtd &0x4 |
| 264 |
|
| 265 |
global _dmem_write_byte |
| 266 |
_dmem_write_byte: |
| 267 |
mov.l %d0,-(%sp) |
| 268 |
mov.l (_060FPSP_TABLE-0x80+_off_dwb,%pc),%d0 |
| 269 |
pea.l (_060FPSP_TABLE-0x80,%pc,%d0) |
| 270 |
mov.l 0x4(%sp),%d0 |
| 271 |
rtd &0x4 |
| 272 |
|
| 273 |
global _dmem_write_word |
| 274 |
_dmem_write_word: |
| 275 |
mov.l %d0,-(%sp) |
| 276 |
mov.l (_060FPSP_TABLE-0x80+_off_dww,%pc),%d0 |
| 277 |
pea.l (_060FPSP_TABLE-0x80,%pc,%d0) |
| 278 |
mov.l 0x4(%sp),%d0 |
| 279 |
rtd &0x4 |
| 280 |
|
| 281 |
global _dmem_write_long |
| 282 |
_dmem_write_long: |
| 283 |
mov.l %d0,-(%sp) |
| 284 |
mov.l (_060FPSP_TABLE-0x80+_off_dwl,%pc),%d0 |
| 285 |
pea.l (_060FPSP_TABLE-0x80,%pc,%d0) |
| 286 |
mov.l 0x4(%sp),%d0 |
| 287 |
rtd &0x4 |
| 288 |
|
| 289 |
# |
| 290 |
# This file contains a set of define statements for constants |
| 291 |
# in order to promote readability within the corecode itself. |
| 292 |
# |
| 293 |
|
| 294 |
set LOCAL_SIZE, 192 # stack frame size(bytes) |
| 295 |
set LV, -LOCAL_SIZE # stack offset |
| 296 |
|
| 297 |
set EXC_SR, 0x4 # stack status register |
| 298 |
set EXC_PC, 0x6 # stack pc |
| 299 |
set EXC_VOFF, 0xa # stacked vector offset |
| 300 |
set EXC_EA, 0xc # stacked <ea> |
| 301 |
|
| 302 |
set EXC_FP, 0x0 # frame pointer |
| 303 |
|
| 304 |
set EXC_AREGS, -68 # offset of all address regs |
| 305 |
set EXC_DREGS, -100 # offset of all data regs |
| 306 |
set EXC_FPREGS, -36 # offset of all fp regs |
| 307 |
|
| 308 |
set EXC_A7, EXC_AREGS+(7*4) # offset of saved a7 |
| 309 |
set OLD_A7, EXC_AREGS+(6*4) # extra copy of saved a7 |
| 310 |
set EXC_A6, EXC_AREGS+(6*4) # offset of saved a6 |
| 311 |
set EXC_A5, EXC_AREGS+(5*4) |
| 312 |
set EXC_A4, EXC_AREGS+(4*4) |
| 313 |
set EXC_A3, EXC_AREGS+(3*4) |
| 314 |
set EXC_A2, EXC_AREGS+(2*4) |
| 315 |
set EXC_A1, EXC_AREGS+(1*4) |
| 316 |
set EXC_A0, EXC_AREGS+(0*4) |
| 317 |
set EXC_D7, EXC_DREGS+(7*4) |
| 318 |
set EXC_D6, EXC_DREGS+(6*4) |
| 319 |
set EXC_D5, EXC_DREGS+(5*4) |
| 320 |
set EXC_D4, EXC_DREGS+(4*4) |
| 321 |
set EXC_D3, EXC_DREGS+(3*4) |
| 322 |
set EXC_D2, EXC_DREGS+(2*4) |
| 323 |
set EXC_D1, EXC_DREGS+(1*4) |
| 324 |
set EXC_D0, EXC_DREGS+(0*4) |
| 325 |
|
| 326 |
set EXC_FP0, EXC_FPREGS+(0*12) # offset of saved fp0 |
| 327 |
set EXC_FP1, EXC_FPREGS+(1*12) # offset of saved fp1 |
| 328 |
set EXC_FP2, EXC_FPREGS+(2*12) # offset of saved fp2 (not used) |
| 329 |
|
| 330 |
set FP_SCR1, LV+80 # fp scratch 1 |
| 331 |
set FP_SCR1_EX, FP_SCR1+0 |
| 332 |
set FP_SCR1_SGN, FP_SCR1+2 |
| 333 |
set FP_SCR1_HI, FP_SCR1+4 |
| 334 |
set FP_SCR1_LO, FP_SCR1+8 |
| 335 |
|
| 336 |
set FP_SCR0, LV+68 # fp scratch 0 |
| 337 |
set FP_SCR0_EX, FP_SCR0+0 |
| 338 |
set FP_SCR0_SGN, FP_SCR0+2 |
| 339 |
set FP_SCR0_HI, FP_SCR0+4 |
| 340 |
set FP_SCR0_LO, FP_SCR0+8 |
| 341 |
|
| 342 |
set FP_DST, LV+56 # fp destination operand |
| 343 |
set FP_DST_EX, FP_DST+0 |
| 344 |
set FP_DST_SGN, FP_DST+2 |
| 345 |
set FP_DST_HI, FP_DST+4 |
| 346 |
set FP_DST_LO, FP_DST+8 |
| 347 |
|
| 348 |
set FP_SRC, LV+44 # fp source operand |
| 349 |
set FP_SRC_EX, FP_SRC+0 |
| 350 |
set FP_SRC_SGN, FP_SRC+2 |
| 351 |
set FP_SRC_HI, FP_SRC+4 |
| 352 |
set FP_SRC_LO, FP_SRC+8 |
| 353 |
|
| 354 |
set USER_FPIAR, LV+40 # FP instr address register |
| 355 |
|
| 356 |
set USER_FPSR, LV+36 # FP status register |
| 357 |
set FPSR_CC, USER_FPSR+0 # FPSR condition codes |
| 358 |
set FPSR_QBYTE, USER_FPSR+1 # FPSR qoutient byte |
| 359 |
set FPSR_EXCEPT, USER_FPSR+2 # FPSR exception status byte |
| 360 |
set FPSR_AEXCEPT, USER_FPSR+3 # FPSR accrued exception byte |
| 361 |
|
| 362 |
set USER_FPCR, LV+32 # FP control register |
| 363 |
set FPCR_ENABLE, USER_FPCR+2 # FPCR exception enable |
| 364 |
set FPCR_MODE, USER_FPCR+3 # FPCR rounding mode control |
| 365 |
|
| 366 |
set L_SCR3, LV+28 # integer scratch 3 |
| 367 |
set L_SCR2, LV+24 # integer scratch 2 |
| 368 |
set L_SCR1, LV+20 # integer scratch 1 |
| 369 |
|
| 370 |
set STORE_FLG, LV+19 # flag: operand store (ie. not fcmp/ftst) |
| 371 |
|
| 372 |
set EXC_TEMP2, LV+24 # temporary space |
| 373 |
set EXC_TEMP, LV+16 # temporary space |
| 374 |
|
| 375 |
set DTAG, LV+15 # destination operand type |
| 376 |
set STAG, LV+14 # source operand type |
| 377 |
|
| 378 |
set SPCOND_FLG, LV+10 # flag: special case (see below) |
| 379 |
|
| 380 |
set EXC_CC, LV+8 # saved condition codes |
| 381 |
set EXC_EXTWPTR, LV+4 # saved current PC (active) |
| 382 |
set EXC_EXTWORD, LV+2 # saved extension word |
| 383 |
set EXC_CMDREG, LV+2 # saved extension word |
| 384 |
set EXC_OPWORD, LV+0 # saved operation word |
| 385 |
|
| 386 |
################################ |
| 387 |
|
| 388 |
# Helpful macros |
| 389 |
|
| 390 |
set FTEMP, 0 # offsets within an |
| 391 |
set FTEMP_EX, 0 # extended precision |
| 392 |
set FTEMP_SGN, 2 # value saved in memory. |
| 393 |
set FTEMP_HI, 4 |
| 394 |
set FTEMP_LO, 8 |
| 395 |
set FTEMP_GRS, 12 |
| 396 |
|
| 397 |
set LOCAL, 0 # offsets within an |
| 398 |
set LOCAL_EX, 0 # extended precision |
| 399 |
set LOCAL_SGN, 2 # value saved in memory. |
| 400 |
set LOCAL_HI, 4 |
| 401 |
set LOCAL_LO, 8 |
| 402 |
set LOCAL_GRS, 12 |
| 403 |
|
| 404 |
set DST, 0 # offsets within an |
| 405 |
set DST_EX, 0 # extended precision |
| 406 |
set DST_HI, 4 # value saved in memory. |
| 407 |
set DST_LO, 8 |
| 408 |
|
| 409 |
set SRC, 0 # offsets within an |
| 410 |
set SRC_EX, 0 # extended precision |
| 411 |
set SRC_HI, 4 # value saved in memory. |
| 412 |
set SRC_LO, 8 |
| 413 |
|
| 414 |
set SGL_LO, 0x3f81 # min sgl prec exponent |
| 415 |
set SGL_HI, 0x407e # max sgl prec exponent |
| 416 |
set DBL_LO, 0x3c01 # min dbl prec exponent |
| 417 |
set DBL_HI, 0x43fe # max dbl prec exponent |
| 418 |
set EXT_LO, 0x0 # min ext prec exponent |
| 419 |
set EXT_HI, 0x7ffe # max ext prec exponent |
| 420 |
|
| 421 |
set EXT_BIAS, 0x3fff # extended precision bias |
| 422 |
set SGL_BIAS, 0x007f # single precision bias |
| 423 |
set DBL_BIAS, 0x03ff # double precision bias |
| 424 |
|
| 425 |
set NORM, 0x00 # operand type for STAG/DTAG |
| 426 |
set ZERO, 0x01 # operand type for STAG/DTAG |
| 427 |
set INF, 0x02 # operand type for STAG/DTAG |
| 428 |
set QNAN, 0x03 # operand type for STAG/DTAG |
| 429 |
set DENORM, 0x04 # operand type for STAG/DTAG |
| 430 |
set SNAN, 0x05 # operand type for STAG/DTAG |
| 431 |
set UNNORM, 0x06 # operand type for STAG/DTAG |
| 432 |
|
| 433 |
################## |
| 434 |
# FPSR/FPCR bits # |
| 435 |
################## |
| 436 |
set neg_bit, 0x3 # negative result |
| 437 |
set z_bit, 0x2 # zero result |
| 438 |
set inf_bit, 0x1 # infinite result |
| 439 |
set nan_bit, 0x0 # NAN result |
| 440 |
|
| 441 |
set q_sn_bit, 0x7 # sign bit of quotient byte |
| 442 |
|
| 443 |
set bsun_bit, 7 # branch on unordered |
| 444 |
set snan_bit, 6 # signalling NAN |
| 445 |
set operr_bit, 5 # operand error |
| 446 |
set ovfl_bit, 4 # overflow |
| 447 |
set unfl_bit, 3 # underflow |
| 448 |
set dz_bit, 2 # divide by zero |
| 449 |
set inex2_bit, 1 # inexact result 2 |
| 450 |
set inex1_bit, 0 # inexact result 1 |
| 451 |
|
| 452 |
set aiop_bit, 7 # accrued inexact operation bit |
| 453 |
set aovfl_bit, 6 # accrued overflow bit |
| 454 |
set aunfl_bit, 5 # accrued underflow bit |
| 455 |
set adz_bit, 4 # accrued dz bit |
| 456 |
set ainex_bit, 3 # accrued inexact bit |
| 457 |
|
| 458 |
############################# |
| 459 |
# FPSR individual bit masks # |
| 460 |
############################# |
| 461 |
set neg_mask, 0x08000000 # negative bit mask (lw) |
| 462 |
set inf_mask, 0x02000000 # infinity bit mask (lw) |
| 463 |
set z_mask, 0x04000000 # zero bit mask (lw) |
| 464 |
set nan_mask, 0x01000000 # nan bit mask (lw) |
| 465 |
|
| 466 |
set neg_bmask, 0x08 # negative bit mask (byte) |
| 467 |
set inf_bmask, 0x02 # infinity bit mask (byte) |
| 468 |
set z_bmask, 0x04 # zero bit mask (byte) |
| 469 |
set nan_bmask, 0x01 # nan bit mask (byte) |
| 470 |
|
| 471 |
set bsun_mask, 0x00008000 # bsun exception mask |
| 472 |
set snan_mask, 0x00004000 # snan exception mask |
| 473 |
set operr_mask, 0x00002000 # operr exception mask |
| 474 |
set ovfl_mask, 0x00001000 # overflow exception mask |
| 475 |
set unfl_mask, 0x00000800 # underflow exception mask |
| 476 |
set dz_mask, 0x00000400 # dz exception mask |
| 477 |
set inex2_mask, 0x00000200 # inex2 exception mask |
| 478 |
set inex1_mask, 0x00000100 # inex1 exception mask |
| 479 |
|
| 480 |
set aiop_mask, 0x00000080 # accrued illegal operation |
| 481 |
set aovfl_mask, 0x00000040 # accrued overflow |
| 482 |
set aunfl_mask, 0x00000020 # accrued underflow |
| 483 |
set adz_mask, 0x00000010 # accrued divide by zero |
| 484 |
set ainex_mask, 0x00000008 # accrued inexact |
| 485 |
|
| 486 |
###################################### |
| 487 |
# FPSR combinations used in the FPSP # |
| 488 |
###################################### |
| 489 |
set dzinf_mask, inf_mask+dz_mask+adz_mask |
| 490 |
set opnan_mask, nan_mask+operr_mask+aiop_mask |
| 491 |
set nzi_mask, 0x01ffffff #clears N, Z, and I |
| 492 |
set unfinx_mask, unfl_mask+inex2_mask+aunfl_mask+ainex_mask |
| 493 |
set unf2inx_mask, unfl_mask+inex2_mask+ainex_mask |
| 494 |
set ovfinx_mask, ovfl_mask+inex2_mask+aovfl_mask+ainex_mask |
| 495 |
set inx1a_mask, inex1_mask+ainex_mask |
| 496 |
set inx2a_mask, inex2_mask+ainex_mask |
| 497 |
set snaniop_mask, nan_mask+snan_mask+aiop_mask |
| 498 |
set snaniop2_mask, snan_mask+aiop_mask |
| 499 |
set naniop_mask, nan_mask+aiop_mask |
| 500 |
set neginf_mask, neg_mask+inf_mask |
| 501 |
set infaiop_mask, inf_mask+aiop_mask |
| 502 |
set negz_mask, neg_mask+z_mask |
| 503 |
set opaop_mask, operr_mask+aiop_mask |
| 504 |
set unfl_inx_mask, unfl_mask+aunfl_mask+ainex_mask |
| 505 |
set ovfl_inx_mask, ovfl_mask+aovfl_mask+ainex_mask |
| 506 |
|
| 507 |
######### |
| 508 |
# misc. # |
| 509 |
######### |
| 510 |
set rnd_stky_bit, 29 # stky bit pos in longword |
| 511 |
|
| 512 |
set sign_bit, 0x7 # sign bit |
| 513 |
set signan_bit, 0x6 # signalling nan bit |
| 514 |
|
| 515 |
set sgl_thresh, 0x3f81 # minimum sgl exponent |
| 516 |
set dbl_thresh, 0x3c01 # minimum dbl exponent |
| 517 |
|
| 518 |
set x_mode, 0x0 # extended precision |
| 519 |
set s_mode, 0x4 # single precision |
| 520 |
set d_mode, 0x8 # double precision |
| 521 |
|
| 522 |
set rn_mode, 0x0 # round-to-nearest |
| 523 |
set rz_mode, 0x1 # round-to-zero |
| 524 |
set rm_mode, 0x2 # round-tp-minus-infinity |
| 525 |
set rp_mode, 0x3 # round-to-plus-infinity |
| 526 |
|
| 527 |
set mantissalen, 64 # length of mantissa in bits |
| 528 |
|
| 529 |
set BYTE, 1 # len(byte) == 1 byte |
| 530 |
set WORD, 2 # len(word) == 2 bytes |
| 531 |
set LONG, 4 # len(longword) == 2 bytes |
| 532 |
|
| 533 |
set BSUN_VEC, 0xc0 # bsun vector offset |
| 534 |
set INEX_VEC, 0xc4 # inexact vector offset |
| 535 |
set DZ_VEC, 0xc8 # dz vector offset |
| 536 |
set UNFL_VEC, 0xcc # unfl vector offset |
| 537 |
set OPERR_VEC, 0xd0 # operr vector offset |
| 538 |
set OVFL_VEC, 0xd4 # ovfl vector offset |
| 539 |
set SNAN_VEC, 0xd8 # snan vector offset |
| 540 |
|
| 541 |
########################### |
| 542 |
# SPecial CONDition FLaGs # |
| 543 |
########################### |
| 544 |
set ftrapcc_flg, 0x01 # flag bit: ftrapcc exception |
| 545 |
set fbsun_flg, 0x02 # flag bit: bsun exception |
| 546 |
set mia7_flg, 0x04 # flag bit: (a7)+ <ea> |
| 547 |
set mda7_flg, 0x08 # flag bit: -(a7) <ea> |
| 548 |
set fmovm_flg, 0x40 # flag bit: fmovm instruction |
| 549 |
set immed_flg, 0x80 # flag bit: &<data> <ea> |
| 550 |
|
| 551 |
set ftrapcc_bit, 0x0 |
| 552 |
set fbsun_bit, 0x1 |
| 553 |
set mia7_bit, 0x2 |
| 554 |
set mda7_bit, 0x3 |
| 555 |
set immed_bit, 0x7 |
| 556 |
|
| 557 |
################################## |
| 558 |
# TRANSCENDENTAL "LAST-OP" FLAGS # |
| 559 |
################################## |
| 560 |
set FMUL_OP, 0x0 # fmul instr performed last |
| 561 |
set FDIV_OP, 0x1 # fdiv performed last |
| 562 |
set FADD_OP, 0x2 # fadd performed last |
| 563 |
set FMOV_OP, 0x3 # fmov performed last |
| 564 |
|
| 565 |
############# |
| 566 |
# CONSTANTS # |
| 567 |
############# |
| 568 |
T1: long 0x40C62D38,0xD3D64634 # 16381 LOG2 LEAD |
| 569 |
T2: long 0x3D6F90AE,0xB1E75CC7 # 16381 LOG2 TRAIL |
| 570 |
|
| 571 |
PI: long 0x40000000,0xC90FDAA2,0x2168C235,0x00000000 |
| 572 |
PIBY2: long 0x3FFF0000,0xC90FDAA2,0x2168C235,0x00000000 |
| 573 |
|
| 574 |
TWOBYPI: |
| 575 |
long 0x3FE45F30,0x6DC9C883 |
| 576 |
|
| 577 |
######################################################################### |
| 578 |
# XDEF **************************************************************** # |
| 579 |
# _fpsp_ovfl(): 060FPSP entry point for FP Overflow exception. # |
| 580 |
# # |
| 581 |
# This handler should be the first code executed upon taking the # |
| 582 |
# FP Overflow exception in an operating system. # |
| 583 |
# # |
| 584 |
# XREF **************************************************************** # |
| 585 |
# _imem_read_long() - read instruction longword # |
| 586 |
# fix_skewed_ops() - adjust src operand in fsave frame # |
| 587 |
# set_tag_x() - determine optype of src/dst operands # |
| 588 |
# store_fpreg() - store opclass 0 or 2 result to FP regfile # |
| 589 |
# unnorm_fix() - change UNNORM operands to NORM or ZERO # |
| 590 |
# load_fpn2() - load dst operand from FP regfile # |
| 591 |
# fout() - emulate an opclass 3 instruction # |
| 592 |
# tbl_unsupp - add of table of emulation routines for opclass 0,2 # |
| 593 |
# _fpsp_done() - "callout" for 060FPSP exit (all work done!) # |
| 594 |
# _real_ovfl() - "callout" for Overflow exception enabled code # |
| 595 |
# _real_inex() - "callout" for Inexact exception enabled code # |
| 596 |
# _real_trace() - "callout" for Trace exception code # |
| 597 |
# # |
| 598 |
# INPUT *************************************************************** # |
| 599 |
# - The system stack contains the FP Ovfl exception stack frame # |
| 600 |
# - The fsave frame contains the source operand # |
| 601 |
# # |
| 602 |
# OUTPUT ************************************************************** # |
| 603 |
# Overflow Exception enabled: # |
| 604 |
# - The system stack is unchanged # |
| 605 |
# - The fsave frame contains the adjusted src op for opclass 0,2 # |
| 606 |
# Overflow Exception disabled: # |
| 607 |
# - The system stack is unchanged # |
| 608 |
# - The "exception present" flag in the fsave frame is cleared # |
| 609 |
# # |
| 610 |
# ALGORITHM *********************************************************** # |
| 611 |
# On the 060, if an FP overflow is present as the result of any # |
| 612 |
# instruction, the 060 will take an overflow exception whether the # |
| 613 |
# exception is enabled or disabled in the FPCR. For the disabled case, # |
| 614 |
# This handler emulates the instruction to determine what the correct # |
| 615 |
# default result should be for the operation. This default result is # |
| 616 |
# then stored in either the FP regfile, data regfile, or memory. # |
| 617 |
# Finally, the handler exits through the "callout" _fpsp_done() # |
| 618 |
# denoting that no exceptional conditions exist within the machine. # |
| 619 |
# If the exception is enabled, then this handler must create the # |
| 620 |
# exceptional operand and plave it in the fsave state frame, and store # |
| 621 |
# the default result (only if the instruction is opclass 3). For # |
| 622 |
# exceptions enabled, this handler must exit through the "callout" # |
| 623 |
# _real_ovfl() so that the operating system enabled overflow handler # |
| 624 |
# can handle this case. # |
| 625 |
# Two other conditions exist. First, if overflow was disabled # |
| 626 |
# but the inexact exception was enabled, this handler must exit # |
| 627 |
# through the "callout" _real_inex() regardless of whether the result # |
| 628 |
# was inexact. # |
| 629 |
# Also, in the case of an opclass three instruction where # |
| 630 |
# overflow was disabled and the trace exception was enabled, this # |
| 631 |
# handler must exit through the "callout" _real_trace(). # |
| 632 |
# # |
| 633 |
######################################################################### |
| 634 |
|
| 635 |
global _fpsp_ovfl |
| 636 |
_fpsp_ovfl: |
| 637 |
|
| 638 |
#$# sub.l &24,%sp # make room for src/dst |
| 639 |
|
| 640 |
link.w %a6,&-LOCAL_SIZE # init stack frame |
| 641 |
|
| 642 |
fsave FP_SRC(%a6) # grab the "busy" frame |
| 643 |
|
| 644 |
movm.l &0x0303,EXC_DREGS(%a6) # save d0-d1/a0-a1 |
| 645 |
fmovm.l %fpcr,%fpsr,%fpiar,USER_FPCR(%a6) # save ctrl regs |
| 646 |
fmovm.x &0xc0,EXC_FPREGS(%a6) # save fp0-fp1 on stack |
| 647 |
|
| 648 |
# the FPIAR holds the "current PC" of the faulting instruction |
| 649 |
mov.l USER_FPIAR(%a6),EXC_EXTWPTR(%a6) |
| 650 |
mov.l EXC_EXTWPTR(%a6),%a0 # fetch instruction addr |
| 651 |
addq.l &0x4,EXC_EXTWPTR(%a6) # incr instruction ptr |
| 652 |
bsr.l _imem_read_long # fetch the instruction words |
| 653 |
mov.l %d0,EXC_OPWORD(%a6) |
| 654 |
|
| 655 |
############################################################################## |
| 656 |
|
| 657 |
btst &0x5,EXC_CMDREG(%a6) # is instr an fmove out? |
| 658 |
bne.w fovfl_out |
| 659 |
|
| 660 |
|
| 661 |
lea FP_SRC(%a6),%a0 # pass: ptr to src op |
| 662 |
bsr.l fix_skewed_ops # fix src op |
| 663 |
|
| 664 |
# since, I believe, only NORMs and DENORMs can come through here, |
| 665 |
# maybe we can avoid the subroutine call. |
| 666 |
lea FP_SRC(%a6),%a0 # pass: ptr to src op |
| 667 |
bsr.l set_tag_x # tag the operand type |
| 668 |
mov.b %d0,STAG(%a6) # maybe NORM,DENORM |
| 669 |
|
| 670 |
# bit five of the fp extension word separates the monadic and dyadic operations |
| 671 |
# that can pass through fpsp_ovfl(). remember that fcmp, ftst, and fsincos |
| 672 |
# will never take this exception. |
| 673 |
btst &0x5,1+EXC_CMDREG(%a6) # is operation monadic or dyadic? |
| 674 |
beq.b fovfl_extract # monadic |
| 675 |
|
| 676 |
bfextu EXC_CMDREG(%a6){&6:&3},%d0 # dyadic; load dst reg |
| 677 |
bsr.l load_fpn2 # load dst into FP_DST |
| 678 |
|
| 679 |
lea FP_DST(%a6),%a0 # pass: ptr to dst op |
| 680 |
bsr.l set_tag_x # tag the operand type |
| 681 |
cmpi.b %d0,&UNNORM # is operand an UNNORM? |
| 682 |
bne.b fovfl_op2_done # no |
| 683 |
bsr.l unnorm_fix # yes; convert to NORM,DENORM,or ZERO |
| 684 |
fovfl_op2_done: |
| 685 |
mov.b %d0,DTAG(%a6) # save dst optype tag |
| 686 |
|
| 687 |
fovfl_extract: |
| 688 |
|
| 689 |
#$# mov.l FP_SRC_EX(%a6),TRAP_SRCOP_EX(%a6) |
| 690 |
#$# mov.l FP_SRC_HI(%a6),TRAP_SRCOP_HI(%a6) |
| 691 |
#$# mov.l FP_SRC_LO(%a6),TRAP_SRCOP_LO(%a6) |
| 692 |
#$# mov.l FP_DST_EX(%a6),TRAP_DSTOP_EX(%a6) |
| 693 |
#$# mov.l FP_DST_HI(%a6),TRAP_DSTOP_HI(%a6) |
| 694 |
#$# mov.l FP_DST_LO(%a6),TRAP_DSTOP_LO(%a6) |
| 695 |
|
| 696 |
clr.l %d0 |
| 697 |
mov.b FPCR_MODE(%a6),%d0 # pass rnd prec/mode |
| 698 |
|
| 699 |
mov.b 1+EXC_CMDREG(%a6),%d1 |
| 700 |
andi.w &0x007f,%d1 # extract extension |
| 701 |
|
| 702 |
andi.l &0x00ff01ff,USER_FPSR(%a6) # zero all but accured field |
| 703 |
|
| 704 |
fmov.l &0x0,%fpcr # zero current control regs |
| 705 |
fmov.l &0x0,%fpsr |
| 706 |
|
| 707 |
lea FP_SRC(%a6),%a0 |
| 708 |
lea FP_DST(%a6),%a1 |
| 709 |
|
| 710 |
# maybe we can make these entry points ONLY the OVFL entry points of each routine. |
| 711 |
mov.l (tbl_unsupp.l,%pc,%d1.w*4),%d1 # fetch routine addr |
| 712 |
jsr (tbl_unsupp.l,%pc,%d1.l*1) |
| 713 |
|
| 714 |
# the operation has been emulated. the result is in fp0. |
| 715 |
# the EXOP, if an exception occurred, is in fp1. |
| 716 |
# we must save the default result regardless of whether |
| 717 |
# traps are enabled or disabled. |
| 718 |
bfextu EXC_CMDREG(%a6){&6:&3},%d0 |
| 719 |
bsr.l store_fpreg |
| 720 |
|
| 721 |
# the exceptional possibilities we have left ourselves with are ONLY overflow |
| 722 |
# and inexact. and, the inexact is such that overflow occurred and was disabled |
| 723 |
# but inexact was enabled. |
| 724 |
btst &ovfl_bit,FPCR_ENABLE(%a6) |
| 725 |
bne.b fovfl_ovfl_on |
| 726 |
|
| 727 |
btst &inex2_bit,FPCR_ENABLE(%a6) |
| 728 |
bne.b fovfl_inex_on |
| 729 |
|
| 730 |
fmovm.x EXC_FPREGS(%a6),&0xc0 # restore fp0-fp1 |
| 731 |
fmovm.l USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs |
| 732 |
movm.l EXC_DREGS(%a6),&0x0303 # restore d0-d1/a0-a1 |
| 733 |
|
| 734 |
unlk %a6 |
| 735 |
#$# add.l &24,%sp |
| 736 |
bra.l _fpsp_done |
| 737 |
|
| 738 |
# overflow is enabled AND overflow, of course, occurred. so, we have the EXOP |
| 739 |
# in fp1. now, simply jump to _real_ovfl()! |
| 740 |
fovfl_ovfl_on: |
| 741 |
fmovm.x &0x40,FP_SRC(%a6) # save EXOP (fp1) to stack |
| 742 |
|
| 743 |
mov.w &0xe005,2+FP_SRC(%a6) # save exc status |
| 744 |
|
| 745 |
fmovm.x EXC_FPREGS(%a6),&0xc0 # restore fp0-fp1 |
| 746 |
fmovm.l USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs |
| 747 |
movm.l EXC_DREGS(%a6),&0x0303 # restore d0-d1/a0-a1 |
| 748 |
|
| 749 |
frestore FP_SRC(%a6) # do this after fmovm,other f<op>s! |
| 750 |
|
| 751 |
unlk %a6 |
| 752 |
|
| 753 |
bra.l _real_ovfl |
| 754 |
|
| 755 |
# overflow occurred but is disabled. meanwhile, inexact is enabled. Therefore, |
| 756 |
# we must jump to real_inex(). |
| 757 |
fovfl_inex_on: |
| 758 |
|
| 759 |
fmovm.x &0x40,FP_SRC(%a6) # save EXOP (fp1) to stack |
| 760 |
|
| 761 |
mov.b &0xc4,1+EXC_VOFF(%a6) # vector offset = 0xc4 |
| 762 |
mov.w &0xe001,2+FP_SRC(%a6) # save exc status |
| 763 |
|
| 764 |
fmovm.x EXC_FPREGS(%a6),&0xc0 # restore fp0-fp1 |
| 765 |
fmovm.l USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs |
| 766 |
movm.l EXC_DREGS(%a6),&0x0303 # restore d0-d1/a0-a1 |
| 767 |
|
| 768 |
frestore FP_SRC(%a6) # do this after fmovm,other f<op>s! |
| 769 |
|
| 770 |
unlk %a6 |
| 771 |
|
| 772 |
bra.l _real_inex |
| 773 |
|
| 774 |
######################################################################## |
| 775 |
fovfl_out: |
| 776 |
|
| 777 |
|
| 778 |
#$# mov.l FP_SRC_EX(%a6),TRAP_SRCOP_EX(%a6) |
| 779 |
#$# mov.l FP_SRC_HI(%a6),TRAP_SRCOP_HI(%a6) |
| 780 |
#$# mov.l FP_SRC_LO(%a6),TRAP_SRCOP_LO(%a6) |
| 781 |
|
| 782 |
# the src operand is definitely a NORM(!), so tag it as such |
| 783 |
mov.b &NORM,STAG(%a6) # set src optype tag |
| 784 |
|
| 785 |
clr.l %d0 |
| 786 |
mov.b FPCR_MODE(%a6),%d0 # pass rnd prec/mode |
| 787 |
|
| 788 |
and.l &0xffff00ff,USER_FPSR(%a6) # zero all but accured field |
| 789 |
|
| 790 |
fmov.l &0x0,%fpcr # zero current control regs |
| 791 |
fmov.l &0x0,%fpsr |
| 792 |
|
| 793 |
lea FP_SRC(%a6),%a0 # pass ptr to src operand |
| 794 |
|
| 795 |
bsr.l fout |
| 796 |
|
| 797 |
btst &ovfl_bit,FPCR_ENABLE(%a6) |
| 798 |
bne.w fovfl_ovfl_on |
| 799 |
|
| 800 |
btst &inex2_bit,FPCR_ENABLE(%a6) |
| 801 |
bne.w fovfl_inex_on |
| 802 |
|
| 803 |
fmovm.x EXC_FPREGS(%a6),&0xc0 # restore fp0-fp1 |
| 804 |
fmovm.l USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs |
| 805 |
movm.l EXC_DREGS(%a6),&0x0303 # restore d0-d1/a0-a1 |
| 806 |
|
| 807 |
unlk %a6 |
| 808 |
#$# add.l &24,%sp |
| 809 |
|
| 810 |
btst &0x7,(%sp) # is trace on? |
| 811 |
beq.l _fpsp_done # no |
| 812 |
|
| 813 |
fmov.l %fpiar,0x8(%sp) # "Current PC" is in FPIAR |
| 814 |
mov.w &0x2024,0x6(%sp) # stk fmt = 0x2; voff = 0x024 |
| 815 |
bra.l _real_trace |
| 816 |
|
| 817 |
######################################################################### |
| 818 |
# XDEF **************************************************************** # |
| 819 |
# _fpsp_unfl(): 060FPSP entry point for FP Underflow exception. # |
| 820 |
# # |
| 821 |
# This handler should be the first code executed upon taking the # |
| 822 |
# FP Underflow exception in an operating system. # |
| 823 |
# # |
| 824 |
# XREF **************************************************************** # |
| 825 |
# _imem_read_long() - read instruction longword # |
| 826 |
# fix_skewed_ops() - adjust src operand in fsave frame # |
| 827 |
# set_tag_x() - determine optype of src/dst operands # |
| 828 |
# store_fpreg() - store opclass 0 or 2 result to FP regfile # |
| 829 |
# unnorm_fix() - change UNNORM operands to NORM or ZERO # |
| 830 |
# load_fpn2() - load dst operand from FP regfile # |
| 831 |
# fout() - emulate an opclass 3 instruction # |
| 832 |
# tbl_unsupp - add of table of emulation routines for opclass 0,2 # |
| 833 |
# _fpsp_done() - "callout" for 060FPSP exit (all work done!) # |
| 834 |
# _real_ovfl() - "callout" for Overflow exception enabled code # |
| 835 |
# _real_inex() - "callout" for Inexact exception enabled code # |
| 836 |
# _real_trace() - "callout" for Trace exception code # |
| 837 |
# # |
| 838 |
# INPUT *************************************************************** # |
| 839 |
# - The system stack contains the FP Unfl exception stack frame # |
| 840 |
# - The fsave frame contains the source operand # |
| 841 |
# # |
| 842 |
# OUTPUT ************************************************************** # |
| 843 |
# Underflow Exception enabled: # |
| 844 |
# - The system stack is unchanged # |
| 845 |
# - The fsave frame contains the adjusted src op for opclass 0,2 # |
| 846 |
# Underflow Exception disabled: # |
| 847 |
# - The system stack is unchanged # |
| 848 |
# - The "exception present" flag in the fsave frame is cleared # |
| 849 |
# # |
| 850 |
# ALGORITHM *********************************************************** # |
| 851 |
# On the 060, if an FP underflow is present as the result of any # |
| 852 |
# instruction, the 060 will take an underflow exception whether the # |
| 853 |
# exception is enabled or disabled in the FPCR. For the disabled case, # |
| 854 |
# This handler emulates the instruction to determine what the correct # |
| 855 |
# default result should be for the operation. This default result is # |
| 856 |
# then stored in either the FP regfile, data regfile, or memory. # |
| 857 |
# Finally, the handler exits through the "callout" _fpsp_done() # |
| 858 |
# denoting that no exceptional conditions exist within the machine. # |
| 859 |
# If the exception is enabled, then this handler must create the # |
| 860 |
# exceptional operand and plave it in the fsave state frame, and store # |
| 861 |
# the default result (only if the instruction is opclass 3). For # |
| 862 |
# exceptions enabled, this handler must exit through the "callout" # |
| 863 |
# _real_unfl() so that the operating system enabled overflow handler # |
| 864 |
# can handle this case. # |
| 865 |
# Two other conditions exist. First, if underflow was disabled # |
| 866 |
# but the inexact exception was enabled and the result was inexact, # |
| 867 |
# this handler must exit through the "callout" _real_inex(). # |
| 868 |
# was inexact. # |
| 869 |
# Also, in the case of an opclass three instruction where # |
| 870 |
# underflow was disabled and the trace exception was enabled, this # |
| 871 |
# handler must exit through the "callout" _real_trace(). # |
| 872 |
# # |
| 873 |
######################################################################### |
| 874 |
|
| 875 |
global _fpsp_unfl |
| 876 |
_fpsp_unfl: |
| 877 |
|
| 878 |
#$# sub.l &24,%sp # make room for src/dst |
| 879 |
|
| 880 |
link.w %a6,&-LOCAL_SIZE # init stack frame |
| 881 |
|
| 882 |
fsave FP_SRC(%a6) # grab the "busy" frame |
| 883 |
|
| 884 |
movm.l &0x0303,EXC_DREGS(%a6) # save d0-d1/a0-a1 |
| 885 |
fmovm.l %fpcr,%fpsr,%fpiar,USER_FPCR(%a6) # save ctrl regs |
| 886 |
fmovm.x &0xc0,EXC_FPREGS(%a6) # save fp0-fp1 on stack |
| 887 |
|
| 888 |
# the FPIAR holds the "current PC" of the faulting instruction |
| 889 |
mov.l USER_FPIAR(%a6),EXC_EXTWPTR(%a6) |
| 890 |
mov.l EXC_EXTWPTR(%a6),%a0 # fetch instruction addr |
| 891 |
addq.l &0x4,EXC_EXTWPTR(%a6) # incr instruction ptr |
| 892 |
bsr.l _imem_read_long # fetch the instruction words |
| 893 |
mov.l %d0,EXC_OPWORD(%a6) |
| 894 |
|
| 895 |
############################################################################## |
| 896 |
|
| 897 |
btst &0x5,EXC_CMDREG(%a6) # is instr an fmove out? |
| 898 |
bne.w funfl_out |
| 899 |
|
| 900 |
|
| 901 |
lea FP_SRC(%a6),%a0 # pass: ptr to src op |
| 902 |
bsr.l fix_skewed_ops # fix src op |
| 903 |
|
| 904 |
lea FP_SRC(%a6),%a0 # pass: ptr to src op |
| 905 |
bsr.l set_tag_x # tag the operand type |
| 906 |
mov.b %d0,STAG(%a6) # maybe NORM,DENORM |
| 907 |
|
| 908 |
# bit five of the fp ext word separates the monadic and dyadic operations |
| 909 |
# that can pass through fpsp_unfl(). remember that fcmp, and ftst |
| 910 |
# will never take this exception. |
| 911 |
btst &0x5,1+EXC_CMDREG(%a6) # is op monadic or dyadic? |
| 912 |
beq.b funfl_extract # monadic |
| 913 |
|
| 914 |
# now, what's left that's not dyadic is fsincos. we can distinguish it |
| 915 |
# from all dyadics by the '0110xxx pattern |
| 916 |
btst &0x4,1+EXC_CMDREG(%a6) # is op an fsincos? |
| 917 |
bne.b funfl_extract # yes |
| 918 |
|
| 919 |
bfextu EXC_CMDREG(%a6){&6:&3},%d0 # dyadic; load dst reg |
| 920 |
bsr.l load_fpn2 # load dst into FP_DST |
| 921 |
|
| 922 |
lea FP_DST(%a6),%a0 # pass: ptr to dst op |
| 923 |
bsr.l set_tag_x # tag the operand type |
| 924 |
cmpi.b %d0,&UNNORM # is operand an UNNORM? |
| 925 |
bne.b funfl_op2_done # no |
| 926 |
bsr.l unnorm_fix # yes; convert to NORM,DENORM,or ZERO |
| 927 |
funfl_op2_done: |
| 928 |
mov.b %d0,DTAG(%a6) # save dst optype tag |
| 929 |
|
| 930 |
funfl_extract: |
| 931 |
|
| 932 |
#$# mov.l FP_SRC_EX(%a6),TRAP_SRCOP_EX(%a6) |
| 933 |
#$# mov.l FP_SRC_HI(%a6),TRAP_SRCOP_HI(%a6) |
| 934 |
#$# mov.l FP_SRC_LO(%a6),TRAP_SRCOP_LO(%a6) |
| 935 |
#$# mov.l FP_DST_EX(%a6),TRAP_DSTOP_EX(%a6) |
| 936 |
#$# mov.l FP_DST_HI(%a6),TRAP_DSTOP_HI(%a6) |
| 937 |
#$# mov.l FP_DST_LO(%a6),TRAP_DSTOP_LO(%a6) |
| 938 |
|
| 939 |
clr.l %d0 |
| 940 |
mov.b FPCR_MODE(%a6),%d0 # pass rnd prec/mode |
| 941 |
|
| 942 |
mov.b 1+EXC_CMDREG(%a6),%d1 |
| 943 |
andi.w &0x007f,%d1 # extract extension |
| 944 |
|
| 945 |
andi.l &0x00ff01ff,USER_FPSR(%a6) |
| 946 |
|
| 947 |
fmov.l &0x0,%fpcr # zero current control regs |
| 948 |
fmov.l &0x0,%fpsr |
| 949 |
|
| 950 |
lea FP_SRC(%a6),%a0 |
| 951 |
lea FP_DST(%a6),%a1 |
| 952 |
|
| 953 |
# maybe we can make these entry points ONLY the OVFL entry points of each routine. |
| 954 |
mov.l (tbl_unsupp.l,%pc,%d1.w*4),%d1 # fetch routine addr |
| 955 |
jsr (tbl_unsupp.l,%pc,%d1.l*1) |
| 956 |
|
| 957 |
bfextu EXC_CMDREG(%a6){&6:&3},%d0 |
| 958 |
bsr.l store_fpreg |
| 959 |
|
| 960 |
# The `060 FPU multiplier hardware is such that if the result of a |
| 961 |
# multiply operation is the smallest possible normalized number |
| 962 |
# (0x00000000_80000000_00000000), then the machine will take an |
| 963 |
# underflow exception. Since this is incorrect, we need to check |
| 964 |
# if our emulation, after re-doing the operation, decided that |
| 965 |
# no underflow was called for. We do these checks only in |
| 966 |
# funfl_{unfl,inex}_on() because w/ both exceptions disabled, this |
| 967 |
# special case will simply exit gracefully with the correct result. |
| 968 |
|
| 969 |
# the exceptional possibilities we have left ourselves with are ONLY overflow |
| 970 |
# and inexact. and, the inexact is such that overflow occurred and was disabled |
| 971 |
# but inexact was enabled. |
| 972 |
btst &unfl_bit,FPCR_ENABLE(%a6) |
| 973 |
bne.b funfl_unfl_on |
| 974 |
|
| 975 |
funfl_chkinex: |
| 976 |
btst &inex2_bit,FPCR_ENABLE(%a6) |
| 977 |
bne.b funfl_inex_on |
| 978 |
|
| 979 |
funfl_exit: |
| 980 |
fmovm.x EXC_FPREGS(%a6),&0xc0 # restore fp0-fp1 |
| 981 |
fmovm.l USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs |
| 982 |
movm.l EXC_DREGS(%a6),&0x0303 # restore d0-d1/a0-a1 |
| 983 |
|
| 984 |
unlk %a6 |
| 985 |
#$# add.l &24,%sp |
| 986 |
bra.l _fpsp_done |
| 987 |
|
| 988 |
# overflow is enabled AND overflow, of course, occurred. so, we have the EXOP |
| 989 |
# in fp1 (don't forget to save fp0). what to do now? |
| 990 |
# well, we simply have to get to go to _real_unfl()! |
| 991 |
funfl_unfl_on: |
| 992 |
|
| 993 |
# The `060 FPU multiplier hardware is such that if the result of a |
| 994 |
# multiply operation is the smallest possible normalized number |
| 995 |
# (0x00000000_80000000_00000000), then the machine will take an |
| 996 |
# underflow exception. Since this is incorrect, we check here to see |
| 997 |
# if our emulation, after re-doing the operation, decided that |
| 998 |
# no underflow was called for. |
| 999 |
btst &unfl_bit,FPSR_EXCEPT(%a6) |
| 1000 |
beq.w funfl_chkinex |
| 1001 |
|
| 1002 |
funfl_unfl_on2: |
| 1003 |
fmovm.x &0x40,FP_SRC(%a6) # save EXOP (fp1) to stack |
| 1004 |
|
| 1005 |
mov.w &0xe003,2+FP_SRC(%a6) # save exc status |
| 1006 |
|
| 1007 |
fmovm.x EXC_FPREGS(%a6),&0xc0 # restore fp0-fp1 |
| 1008 |
fmovm.l USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs |
| 1009 |
movm.l EXC_DREGS(%a6),&0x0303 # restore d0-d1/a0-a1 |
| 1010 |
|
| 1011 |
frestore FP_SRC(%a6) # do this after fmovm,other f<op>s! |
| 1012 |
|
| 1013 |
unlk %a6 |
| 1014 |
|
| 1015 |
bra.l _real_unfl |
| 1016 |
|
| 1017 |
# underflow occurred but is disabled. meanwhile, inexact is enabled. Therefore, |
| 1018 |
# we must jump to real_inex(). |
| 1019 |
funfl_inex_on: |
| 1020 |
|
| 1021 |
# The `060 FPU multiplier hardware is such that if the result of a |
| 1022 |
# multiply operation is the smallest possible normalized number |
| 1023 |
# (0x00000000_80000000_00000000), then the machine will take an |
| 1024 |
# underflow exception. |
| 1025 |
# But, whether bogus or not, if inexact is enabled AND it occurred, |
| 1026 |
# then we have to branch to real_inex. |
| 1027 |
|
| 1028 |
btst &inex2_bit,FPSR_EXCEPT(%a6) |
| 1029 |
beq.w funfl_exit |
| 1030 |
|
| 1031 |
funfl_inex_on2: |
| 1032 |
|
| 1033 |
fmovm.x &0x40,FP_SRC(%a6) # save EXOP to stack |
| 1034 |
|
| 1035 |
mov.b &0xc4,1+EXC_VOFF(%a6) # vector offset = 0xc4 |
| 1036 |
mov.w &0xe001,2+FP_SRC(%a6) # save exc status |
| 1037 |
|
| 1038 |
fmovm.x EXC_FPREGS(%a6),&0xc0 # restore fp0-fp1 |
| 1039 |
fmovm.l USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs |
| 1040 |
movm.l EXC_DREGS(%a6),&0x0303 # restore d0-d1/a0-a1 |
| 1041 |
|
| 1042 |
frestore FP_SRC(%a6) # do this after fmovm,other f<op>s! |
| 1043 |
|
| 1044 |
unlk %a6 |
| 1045 |
|
| 1046 |
bra.l _real_inex |
| 1047 |
|
| 1048 |
####################################################################### |
| 1049 |
funfl_out: |
| 1050 |
|
| 1051 |
|
| 1052 |
#$# mov.l FP_SRC_EX(%a6),TRAP_SRCOP_EX(%a6) |
| 1053 |
#$# mov.l FP_SRC_HI(%a6),TRAP_SRCOP_HI(%a6) |
| 1054 |
#$# mov.l FP_SRC_LO(%a6),TRAP_SRCOP_LO(%a6) |
| 1055 |
|
| 1056 |
# the src operand is definitely a NORM(!), so tag it as such |
| 1057 |
mov.b &NORM,STAG(%a6) # set src optype tag |
| 1058 |
|
| 1059 |
clr.l %d0 |
| 1060 |
mov.b FPCR_MODE(%a6),%d0 # pass rnd prec/mode |
| 1061 |
|
| 1062 |
and.l &0xffff00ff,USER_FPSR(%a6) # zero all but accured field |
| 1063 |
|
| 1064 |
fmov.l &0x0,%fpcr # zero current control regs |
| 1065 |
fmov.l &0x0,%fpsr |
| 1066 |
|
| 1067 |
lea FP_SRC(%a6),%a0 # pass ptr to src operand |
| 1068 |
|
| 1069 |
bsr.l fout |
| 1070 |
|
| 1071 |
btst &unfl_bit,FPCR_ENABLE(%a6) |
| 1072 |
bne.w funfl_unfl_on2 |
| 1073 |
|
| 1074 |
btst &inex2_bit,FPCR_ENABLE(%a6) |
| 1075 |
bne.w funfl_inex_on2 |
| 1076 |
|
| 1077 |
fmovm.x EXC_FPREGS(%a6),&0xc0 # restore fp0-fp1 |
| 1078 |
fmovm.l USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs |
| 1079 |
movm.l EXC_DREGS(%a6),&0x0303 # restore d0-d1/a0-a1 |
| 1080 |
|
| 1081 |
unlk %a6 |
| 1082 |
#$# add.l &24,%sp |
| 1083 |
|
| 1084 |
btst &0x7,(%sp) # is trace on? |
| 1085 |
beq.l _fpsp_done # no |
| 1086 |
|
| 1087 |
fmov.l %fpiar,0x8(%sp) # "Current PC" is in FPIAR |
| 1088 |
mov.w &0x2024,0x6(%sp) # stk fmt = 0x2; voff = 0x024 |
| 1089 |
bra.l _real_trace |
| 1090 |
|
| 1091 |
######################################################################### |
| 1092 |
# XDEF **************************************************************** # |
| 1093 |
# _fpsp_unsupp(): 060FPSP entry point for FP "Unimplemented # |
| 1094 |
# Data Type" exception. # |
| 1095 |
# # |
| 1096 |
# This handler should be the first code executed upon taking the # |
| 1097 |
# FP Unimplemented Data Type exception in an operating system. # |
| 1098 |
# # |
| 1099 |
# XREF **************************************************************** # |
| 1100 |
# _imem_read_{word,long}() - read instruction word/longword # |
| 1101 |
# fix_skewed_ops() - adjust src operand in fsave frame # |
| 1102 |
# set_tag_x() - determine optype of src/dst operands # |
| 1103 |
# store_fpreg() - store opclass 0 or 2 result to FP regfile # |
| 1104 |
# unnorm_fix() - change UNNORM operands to NORM or ZERO # |
| 1105 |
# load_fpn2() - load dst operand from FP regfile # |
| 1106 |
# load_fpn1() - load src operand from FP regfile # |
| 1107 |
# fout() - emulate an opclass 3 instruction # |
| 1108 |
# tbl_unsupp - add of table of emulation routines for opclass 0,2 # |
| 1109 |
# _real_inex() - "callout" to operating system inexact handler # |
| 1110 |
# _fpsp_done() - "callout" for exit; work all done # |
| 1111 |
# _real_trace() - "callout" for Trace enabled exception # |
| 1112 |
# funimp_skew() - adjust fsave src ops to "incorrect" value # |
| 1113 |
# _real_snan() - "callout" for SNAN exception # |
| 1114 |
# _real_operr() - "callout" for OPERR exception # |
| 1115 |
# _real_ovfl() - "callout" for OVFL exception # |
| 1116 |
# _real_unfl() - "callout" for UNFL exception # |
| 1117 |
# get_packed() - fetch packed operand from memory # |
| 1118 |
# # |
| 1119 |
# INPUT *************************************************************** # |
| 1120 |
# - The system stack contains the "Unimp Data Type" stk frame # |
| 1121 |
# - The fsave frame contains the ssrc op (for UNNORM/DENORM) # |
| 1122 |
# # |
| 1123 |
# OUTPUT ************************************************************** # |
| 1124 |
# If Inexact exception (opclass 3): # |
| 1125 |
# - The system stack is changed to an Inexact exception stk frame # |
| 1126 |
# If SNAN exception (opclass 3): # |
| 1127 |
# - The system stack is changed to an SNAN exception stk frame # |
| 1128 |
# If OPERR exception (opclass 3): # |
| 1129 |
# - The system stack is changed to an OPERR exception stk frame # |
| 1130 |
# If OVFL exception (opclass 3): # |
| 1131 |
# - The system stack is changed to an OVFL exception stk frame # |
| 1132 |
# If UNFL exception (opclass 3): # |
| 1133 |
# - The system stack is changed to an UNFL exception stack frame # |
| 1134 |
# If Trace exception enabled: # |
| 1135 |
# - The system stack is changed to a Trace exception stack frame # |
| 1136 |
# Else: (normal case) # |
| 1137 |
# - Correct result has been stored as appropriate # |
| 1138 |
# # |
| 1139 |
# ALGORITHM *********************************************************** # |
| 1140 |
# Two main instruction types can enter here: (1) DENORM or UNNORM # |
| 1141 |
# unimplemented data types. These can be either opclass 0,2 or 3 # |
| 1142 |
# instructions, and (2) PACKED unimplemented data format instructions # |
| 1143 |
# also of opclasses 0,2, or 3. # |
| 1144 |
# For UNNORM/DENORM opclass 0 and 2, the handler fetches the src # |
| 1145 |
# operand from the fsave state frame and the dst operand (if dyadic) # |
| 1146 |
# from the FP register file. The instruction is then emulated by # |
| 1147 |
# choosing an emulation routine from a table of routines indexed by # |
| 1148 |
# instruction type. Once the instruction has been emulated and result # |
| 1149 |
# saved, then we check to see if any enabled exceptions resulted from # |
| 1150 |
# instruction emulation. If none, then we exit through the "callout" # |
| 1151 |
# _fpsp_done(). If there is an enabled FP exception, then we insert # |
| 1152 |
# this exception into the FPU in the fsave state frame and then exit # |
| 1153 |
# through _fpsp_done(). # |
| 1154 |
# PACKED opclass 0 and 2 is similar in how the instruction is # |
| 1155 |
# emulated and exceptions handled. The differences occur in how the # |
| 1156 |
# handler loads the packed op (by calling get_packed() routine) and # |
| 1157 |
# by the fact that a Trace exception could be pending for PACKED ops. # |
| 1158 |
# If a Trace exception is pending, then the current exception stack # |
| 1159 |
# frame is changed to a Trace exception stack frame and an exit is # |
| 1160 |
# made through _real_trace(). # |
| 1161 |
# For UNNORM/DENORM opclass 3, the actual move out to memory is # |
| 1162 |
# performed by calling the routine fout(). If no exception should occur # |
| 1163 |
# as the result of emulation, then an exit either occurs through # |
| 1164 |
# _fpsp_done() or through _real_trace() if a Trace exception is pending # |
| 1165 |
# (a Trace stack frame must be created here, too). If an FP exception # |
| 1166 |
# should occur, then we must create an exception stack frame of that # |
| 1167 |
# type and jump to either _real_snan(), _real_operr(), _real_inex(), # |
| 1168 |
# _real_unfl(), or _real_ovfl() as appropriate. PACKED opclass 3 # |
| 1169 |
# emulation is performed in a similar manner. # |
| 1170 |
# # |
| 1171 |
######################################################################### |
| 1172 |
|
| 1173 |
# |
| 1174 |
# (1) DENORM and UNNORM (unimplemented) data types: |
| 1175 |
# |
| 1176 |
# post-instruction |
| 1177 |
# ***************** |
| 1178 |
# * EA * |
| 1179 |
# pre-instruction * * |
| 1180 |
# ***************** ***************** |
| 1181 |
# * 0x0 * 0x0dc * * 0x3 * 0x0dc * |
| 1182 |
# ***************** ***************** |
| 1183 |
# * Next * * Next * |
| 1184 |
# * PC * * PC * |
| 1185 |
# ***************** ***************** |
| 1186 |
# * SR * * SR * |
| 1187 |
# ***************** ***************** |
| 1188 |
# |
| 1189 |
# (2) PACKED format (unsupported) opclasses two and three: |
| 1190 |
# ***************** |
| 1191 |
# * EA * |
| 1192 |
# * * |
| 1193 |
# ***************** |
| 1194 |
# * 0x2 * 0x0dc * |
| 1195 |
# ***************** |
| 1196 |
# * Next * |
| 1197 |
# * PC * |
| 1198 |
# ***************** |
| 1199 |
# * SR * |
| 1200 |
# ***************** |
| 1201 |
# |
| 1202 |
global _fpsp_unsupp |
| 1203 |
_fpsp_unsupp: |
| 1204 |
|
| 1205 |
link.w %a6,&-LOCAL_SIZE # init stack frame |
| 1206 |
|
| 1207 |
fsave FP_SRC(%a6) # save fp state |
| 1208 |
|
| 1209 |
movm.l &0x0303,EXC_DREGS(%a6) # save d0-d1/a0-a1 |
| 1210 |
fmovm.l %fpcr,%fpsr,%fpiar,USER_FPCR(%a6) # save ctrl regs |
| 1211 |
fmovm.x &0xc0,EXC_FPREGS(%a6) # save fp0-fp1 on stack |
| 1212 |
|
| 1213 |
btst &0x5,EXC_SR(%a6) # user or supervisor mode? |
| 1214 |
bne.b fu_s |
| 1215 |
fu_u: |
| 1216 |
mov.l %usp,%a0 # fetch user stack pointer |
| 1217 |
mov.l %a0,EXC_A7(%a6) # save on stack |
| 1218 |
bra.b fu_cont |
| 1219 |
# if the exception is an opclass zero or two unimplemented data type |
| 1220 |
# exception, then the a7' calculated here is wrong since it doesn't |
| 1221 |
# stack an ea. however, we don't need an a7' for this case anyways. |
| 1222 |
fu_s: |
| 1223 |
lea 0x4+EXC_EA(%a6),%a0 # load old a7' |
| 1224 |
mov.l %a0,EXC_A7(%a6) # save on stack |
| 1225 |
|
| 1226 |
fu_cont: |
| 1227 |
|
| 1228 |
# the FPIAR holds the "current PC" of the faulting instruction |
| 1229 |
# the FPIAR should be set correctly for ALL exceptions passing through |
| 1230 |
# this point. |
| 1231 |
mov.l USER_FPIAR(%a6),EXC_EXTWPTR(%a6) |
| 1232 |
mov.l EXC_EXTWPTR(%a6),%a0 # fetch instruction addr |
| 1233 |
addq.l &0x4,EXC_EXTWPTR(%a6) # incr instruction ptr |
| 1234 |
bsr.l _imem_read_long # fetch the instruction words |
| 1235 |
mov.l %d0,EXC_OPWORD(%a6) # store OPWORD and EXTWORD |
| 1236 |
|
| 1237 |
############################ |
| 1238 |
|
| 1239 |
clr.b SPCOND_FLG(%a6) # clear special condition flag |
| 1240 |
|
| 1241 |
# Separate opclass three (fpn-to-mem) ops since they have a different |
| 1242 |
# stack frame and protocol. |
| 1243 |
btst &0x5,EXC_CMDREG(%a6) # is it an fmove out? |
| 1244 |
bne.w fu_out # yes |
| 1245 |
|
| 1246 |
# Separate packed opclass two instructions. |
| 1247 |
bfextu EXC_CMDREG(%a6){&0:&6},%d0 |
| 1248 |
cmpi.b %d0,&0x13 |
| 1249 |
beq.w fu_in_pack |
| 1250 |
|
| 1251 |
|
| 1252 |
# I'm not sure at this point what FPSR bits are valid for this instruction. |
| 1253 |
# so, since the emulation routines re-create them anyways, zero exception field |
| 1254 |
andi.l &0x00ff00ff,USER_FPSR(%a6) # zero exception field |
| 1255 |
|
| 1256 |
fmov.l &0x0,%fpcr # zero current control regs |
| 1257 |
fmov.l &0x0,%fpsr |
| 1258 |
|
| 1259 |
# Opclass two w/ memory-to-fpn operation will have an incorrect extended |
| 1260 |
# precision format if the src format was single or double and the |
| 1261 |
# source data type was an INF, NAN, DENORM, or UNNORM |
| 1262 |
lea FP_SRC(%a6),%a0 # pass ptr to input |
| 1263 |
bsr.l fix_skewed_ops |
| 1264 |
|
| 1265 |
# we don't know whether the src operand or the dst operand (or both) is the |
| 1266 |
# UNNORM or DENORM. call the function that tags the operand type. if the |
| 1267 |
# input is an UNNORM, then convert it to a NORM, DENORM, or ZERO. |
| 1268 |
lea FP_SRC(%a6),%a0 # pass: ptr to src op |
| 1269 |
bsr.l set_tag_x # tag the operand type |
| 1270 |
cmpi.b %d0,&UNNORM # is operand an UNNORM? |
| 1271 |
bne.b fu_op2 # no |
| 1272 |
bsr.l unnorm_fix # yes; convert to NORM,DENORM,or ZERO |
| 1273 |
|
| 1274 |
fu_op2: |
| 1275 |
mov.b %d0,STAG(%a6) # save src optype tag |
| 1276 |
|
| 1277 |
bfextu EXC_CMDREG(%a6){&6:&3},%d0 # dyadic; load dst reg |
| 1278 |
|
| 1279 |
# bit five of the fp extension word separates the monadic and dyadic operations |
| 1280 |
# at this point |
| 1281 |
btst &0x5,1+EXC_CMDREG(%a6) # is operation monadic or dyadic? |
| 1282 |
beq.b fu_extract # monadic |
| 1283 |
cmpi.b 1+EXC_CMDREG(%a6),&0x3a # is operation an ftst? |
| 1284 |
beq.b fu_extract # yes, so it's monadic, too |
| 1285 |
|
| 1286 |
bsr.l load_fpn2 # load dst into FP_DST |
| 1287 |
|
| 1288 |
lea FP_DST(%a6),%a0 # pass: ptr to dst op |
| 1289 |
bsr.l set_tag_x # tag the operand type |
| 1290 |
cmpi.b %d0,&UNNORM # is operand an UNNORM? |
| 1291 |
bne.b fu_op2_done # no |
| 1292 |
bsr.l unnorm_fix # yes; convert to NORM,DENORM,or ZERO |
| 1293 |
fu_op2_done: |
| 1294 |
mov.b %d0,DTAG(%a6) # save dst optype tag |
| 1295 |
|
| 1296 |
fu_extract: |
| 1297 |
clr.l %d0 |
| 1298 |
mov.b FPCR_MODE(%a6),%d0 # fetch rnd mode/prec |
| 1299 |
|
| 1300 |
bfextu 1+EXC_CMDREG(%a6){&1:&7},%d1 # extract extension |
| 1301 |
|
| 1302 |
lea FP_SRC(%a6),%a0 |
| 1303 |
lea FP_DST(%a6),%a1 |
| 1304 |
|
| 1305 |
mov.l (tbl_unsupp.l,%pc,%d1.l*4),%d1 # fetch routine addr |
| 1306 |
jsr (tbl_unsupp.l,%pc,%d1.l*1) |
| 1307 |
|
| 1308 |
# |
| 1309 |
# Exceptions in order of precedence: |
| 1310 |
# BSUN : none |
| 1311 |
# SNAN : all dyadic ops |
| 1312 |
# OPERR : fsqrt(-NORM) |
| 1313 |
# OVFL : all except ftst,fcmp |
| 1314 |
# UNFL : all except ftst,fcmp |
| 1315 |
# DZ : fdiv |
| 1316 |
# INEX2 : all except ftst,fcmp |
| 1317 |
# INEX1 : none (packed doesn't go through here) |
| 1318 |
# |
| 1319 |
|
| 1320 |
# we determine the highest priority exception(if any) set by the |
| 1321 |
# emulation routine that has also been enabled by the user. |
| 1322 |
mov.b FPCR_ENABLE(%a6),%d0 # fetch exceptions set |
| 1323 |
bne.b fu_in_ena # some are enabled |
| 1324 |
|
| 1325 |
fu_in_cont: |
| 1326 |
# fcmp and ftst do not store any result. |
| 1327 |
mov.b 1+EXC_CMDREG(%a6),%d0 # fetch extension |
| 1328 |
andi.b &0x38,%d0 # extract bits 3-5 |
| 1329 |
cmpi.b %d0,&0x38 # is instr fcmp or ftst? |
| 1330 |
beq.b fu_in_exit # yes |
| 1331 |
|
| 1332 |
bfextu EXC_CMDREG(%a6){&6:&3},%d0 # dyadic; load dst reg |
| 1333 |
bsr.l store_fpreg # store the result |
| 1334 |
|
| 1335 |
fu_in_exit: |
| 1336 |
|
| 1337 |
fmovm.x EXC_FPREGS(%a6),&0xc0 # restore fp0/fp1 |
| 1338 |
fmovm.l USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs |
| 1339 |
movm.l EXC_DREGS(%a6),&0x0303 # restore d0-d1/a0-a1 |
| 1340 |
|
| 1341 |
unlk %a6 |
| 1342 |
|
| 1343 |
bra.l _fpsp_done |
| 1344 |
|
| 1345 |
fu_in_ena: |
| 1346 |
and.b FPSR_EXCEPT(%a6),%d0 # keep only ones enabled |
| 1347 |
bfffo %d0{&24:&8},%d0 # find highest priority exception |
| 1348 |
bne.b fu_in_exc # there is at least one set |
| 1349 |
|
| 1350 |
# |
| 1351 |
# No exceptions occurred that were also enabled. Now: |
| 1352 |
# |
| 1353 |
# if (OVFL && ovfl_disabled && inexact_enabled) { |
| 1354 |
# branch to _real_inex() (even if the result was exact!); |
| 1355 |
# } else { |
| 1356 |
# save the result in the proper fp reg (unless the op is fcmp or ftst); |
| 1357 |
# return; |
| 1358 |
# } |
| 1359 |
# |
| 1360 |
btst &ovfl_bit,FPSR_EXCEPT(%a6) # was overflow set? |
| 1361 |
beq.b fu_in_cont # no |
| 1362 |
|
| 1363 |
fu_in_ovflchk: |
| 1364 |
btst &inex2_bit,FPCR_ENABLE(%a6) # was inexact enabled? |
| 1365 |
beq.b fu_in_cont # no |
| 1366 |
bra.w fu_in_exc_ovfl # go insert overflow frame |
| 1367 |
|
| 1368 |
# |
| 1369 |
# An exception occurred and that exception was enabled: |
| 1370 |
# |
| 1371 |
# shift enabled exception field into lo byte of d0; |
| 1372 |
# if (((INEX2 || INEX1) && inex_enabled && OVFL && ovfl_disabled) || |
| 1373 |
# ((INEX2 || INEX1) && inex_enabled && UNFL && unfl_disabled)) { |
| 1374 |
# /* |
| 1375 |
# * this is the case where we must call _real_inex() now or else |
| 1376 |
# * there will be no other way to pass it the exceptional operand |
| 1377 |
# */ |
| 1378 |
# call _real_inex(); |
| 1379 |
# } else { |
| 1380 |
# restore exc state (SNAN||OPERR||OVFL||UNFL||DZ||INEX) into the FPU; |
| 1381 |
# } |
| 1382 |
# |
| 1383 |
fu_in_exc: |
| 1384 |
subi.l &24,%d0 # fix offset to be 0-8 |
| 1385 |
cmpi.b %d0,&0x6 # is exception INEX? (6) |
| 1386 |
bne.b fu_in_exc_exit # no |
| 1387 |
|
| 1388 |
# the enabled exception was inexact |
| 1389 |
btst &unfl_bit,FPSR_EXCEPT(%a6) # did disabled underflow occur? |
| 1390 |
bne.w fu_in_exc_unfl # yes |
| 1391 |
btst &ovfl_bit,FPSR_EXCEPT(%a6) # did disabled overflow occur? |
| 1392 |
bne.w fu_in_exc_ovfl # yes |
| 1393 |
|
| 1394 |
# here, we insert the correct fsave status value into the fsave frame for the |
| 1395 |
# corresponding exception. the operand in the fsave frame should be the original |
| 1396 |
# src operand. |
| 1397 |
fu_in_exc_exit: |
| 1398 |
mov.l %d0,-(%sp) # save d0 |
| 1399 |
bsr.l funimp_skew # skew sgl or dbl inputs |
| 1400 |
mov.l (%sp)+,%d0 # restore d0 |
| 1401 |
|
| 1402 |
mov.w (tbl_except.b,%pc,%d0.w*2),2+FP_SRC(%a6) # create exc status |
| 1403 |
|
| 1404 |
fmovm.x EXC_FPREGS(%a6),&0xc0 # restore fp0/fp1 |
| 1405 |
fmovm.l USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs |
| 1406 |
movm.l EXC_DREGS(%a6),&0x0303 # restore d0-d1/a0-a1 |
| 1407 |
|
| 1408 |
frestore FP_SRC(%a6) # restore src op |
| 1409 |
|
| 1410 |
unlk %a6 |
| 1411 |
|
| 1412 |
bra.l _fpsp_done |
| 1413 |
|
| 1414 |
tbl_except: |
| 1415 |
short 0xe000,0xe006,0xe004,0xe005 |
| 1416 |
short 0xe003,0xe002,0xe001,0xe001 |
| 1417 |
|
| 1418 |
fu_in_exc_unfl: |
| 1419 |
mov.w &0x4,%d0 |
| 1420 |
bra.b fu_in_exc_exit |
| 1421 |
fu_in_exc_ovfl: |
| 1422 |
mov.w &0x03,%d0 |
| 1423 |
bra.b fu_in_exc_exit |
| 1424 |
|
| 1425 |
# If the input operand to this operation was opclass two and a single |
| 1426 |
# or double precision denorm, inf, or nan, the operand needs to be |
| 1427 |
# "corrected" in order to have the proper equivalent extended precision |
| 1428 |
# number. |
| 1429 |
global fix_skewed_ops |
| 1430 |
fix_skewed_ops: |
| 1431 |
bfextu EXC_CMDREG(%a6){&0:&6},%d0 # extract opclass,src fmt |
| 1432 |
cmpi.b %d0,&0x11 # is class = 2 & fmt = sgl? |
| 1433 |
beq.b fso_sgl # yes |
| 1434 |
cmpi.b %d0,&0x15 # is class = 2 & fmt = dbl? |
| 1435 |
beq.b fso_dbl # yes |
| 1436 |
rts # no |
| 1437 |
|
| 1438 |
fso_sgl: |
| 1439 |
mov.w LOCAL_EX(%a0),%d0 # fetch src exponent |
| 1440 |
andi.w &0x7fff,%d0 # strip sign |
| 1441 |
cmpi.w %d0,&0x3f80 # is |exp| == $3f80? |
| 1442 |
beq.b fso_sgl_dnrm_zero # yes |
| 1443 |
cmpi.w %d0,&0x407f # no; is |exp| == $407f? |
| 1444 |
beq.b fso_infnan # yes |
| 1445 |
rts # no |
| 1446 |
|
| 1447 |
fso_sgl_dnrm_zero: |
| 1448 |
andi.l &0x7fffffff,LOCAL_HI(%a0) # clear j-bit |
| 1449 |
beq.b fso_zero # it's a skewed zero |
| 1450 |
fso_sgl_dnrm: |
| 1451 |
# here, we count on norm not to alter a0... |
| 1452 |
bsr.l norm # normalize mantissa |
| 1453 |
neg.w %d0 # -shft amt |
| 1454 |
addi.w &0x3f81,%d0 # adjust new exponent |
| 1455 |
andi.w &0x8000,LOCAL_EX(%a0) # clear old exponent |
| 1456 |
or.w %d0,LOCAL_EX(%a0) # insert new exponent |
| 1457 |
rts |
| 1458 |
|
| 1459 |
fso_zero: |
| 1460 |
andi.w &0x8000,LOCAL_EX(%a0) # clear bogus exponent |
| 1461 |
rts |
| 1462 |
|
| 1463 |
fso_infnan: |
| 1464 |
andi.b &0x7f,LOCAL_HI(%a0) # clear j-bit |
| 1465 |
ori.w &0x7fff,LOCAL_EX(%a0) # make exponent = $7fff |
| 1466 |
rts |
| 1467 |
|
| 1468 |
fso_dbl: |
| 1469 |
mov.w LOCAL_EX(%a0),%d0 # fetch src exponent |
| 1470 |
andi.w &0x7fff,%d0 # strip sign |
| 1471 |
cmpi.w %d0,&0x3c00 # is |exp| == $3c00? |
| 1472 |
beq.b fso_dbl_dnrm_zero # yes |
| 1473 |
cmpi.w %d0,&0x43ff # no; is |exp| == $43ff? |
| 1474 |
beq.b fso_infnan # yes |
| 1475 |
rts # no |
| 1476 |
|
| 1477 |
fso_dbl_dnrm_zero: |
| 1478 |
andi.l &0x7fffffff,LOCAL_HI(%a0) # clear j-bit |
| 1479 |
bne.b fso_dbl_dnrm # it's a skewed denorm |
| 1480 |
tst.l LOCAL_LO(%a0) # is it a zero? |
| 1481 |
beq.b fso_zero # yes |
| 1482 |
fso_dbl_dnrm: |
| 1483 |
# here, we count on norm not to alter a0... |
| 1484 |
bsr.l norm # normalize mantissa |
| 1485 |
neg.w %d0 # -shft amt |
| 1486 |
addi.w &0x3c01,%d0 # adjust new exponent |
| 1487 |
andi.w &0x8000,LOCAL_EX(%a0) # clear old exponent |
| 1488 |
or.w %d0,LOCAL_EX(%a0) # insert new exponent |
| 1489 |
rts |
| 1490 |
|
| 1491 |
################################################################# |
| 1492 |
|
| 1493 |
# fmove out took an unimplemented data type exception. |
| 1494 |
# the src operand is in FP_SRC. Call _fout() to write out the result and |
| 1495 |
# to determine which exceptions, if any, to take. |
| 1496 |
fu_out: |
| 1497 |
|
| 1498 |
# Separate packed move outs from the UNNORM and DENORM move outs. |
| 1499 |
bfextu EXC_CMDREG(%a6){&3:&3},%d0 |
| 1500 |
cmpi.b %d0,&0x3 |
| 1501 |
beq.w fu_out_pack |
| 1502 |
cmpi.b %d0,&0x7 |
| 1503 |
beq.w fu_out_pack |
| 1504 |
|
| 1505 |
|
| 1506 |
# I'm not sure at this point what FPSR bits are valid for this instruction. |
| 1507 |
# so, since the emulation routines re-create them anyways, zero exception field. |
| 1508 |
# fmove out doesn't affect ccodes. |
| 1509 |
and.l &0xffff00ff,USER_FPSR(%a6) # zero exception field |
| 1510 |
|
| 1511 |
fmov.l &0x0,%fpcr # zero current control regs |
| 1512 |
fmov.l &0x0,%fpsr |
| 1513 |
|
| 1514 |
# the src can ONLY be a DENORM or an UNNORM! so, don't make any big subroutine |
| 1515 |
# call here. just figure out what it is... |
| 1516 |
mov.w FP_SRC_EX(%a6),%d0 # get exponent |
| 1517 |
andi.w &0x7fff,%d0 # strip sign |
| 1518 |
beq.b fu_out_denorm # it's a DENORM |
| 1519 |
|
| 1520 |
lea FP_SRC(%a6),%a0 |
| 1521 |
bsr.l unnorm_fix # yes; fix it |
| 1522 |
|
| 1523 |
mov.b %d0,STAG(%a6) |
| 1524 |
|
| 1525 |
bra.b fu_out_cont |
| 1526 |
fu_out_denorm: |
| 1527 |
mov.b &DENORM,STAG(%a6) |
| 1528 |
fu_out_cont: |
| 1529 |
|
| 1530 |
clr.l %d0 |
| 1531 |
mov.b FPCR_MODE(%a6),%d0 # fetch rnd mode/prec |
| 1532 |
|
| 1533 |
lea FP_SRC(%a6),%a0 # pass ptr to src operand |
| 1534 |
|
| 1535 |
mov.l (%a6),EXC_A6(%a6) # in case a6 changes |
| 1536 |
bsr.l fout # call fmove out routine |
| 1537 |
|
| 1538 |
# Exceptions in order of precedence: |
| 1539 |
# BSUN : none |
| 1540 |
# SNAN : none |
| 1541 |
# OPERR : fmove.{b,w,l} out of large UNNORM |
| 1542 |
# OVFL : fmove.{s,d} |
| 1543 |
# UNFL : fmove.{s,d,x} |
| 1544 |
# DZ : none |
| 1545 |
# INEX2 : all |
| 1546 |
# INEX1 : none (packed doesn't travel through here) |
| 1547 |
|
| 1548 |
# determine the highest priority exception(if any) set by the |
| 1549 |
# emulation routine that has also been enabled by the user. |
| 1550 |
mov.b FPCR_ENABLE(%a6),%d0 # fetch exceptions enabled |
| 1551 |
bne.w fu_out_ena # some are enabled |
| 1552 |
|
| 1553 |
fu_out_done: |
| 1554 |
|
| 1555 |
mov.l EXC_A6(%a6),(%a6) # in case a6 changed |
| 1556 |
|
| 1557 |
# on extended precision opclass three instructions using pre-decrement or |
| 1558 |
# post-increment addressing mode, the address register is not updated. is the |
| 1559 |
# address register was the stack pointer used from user mode, then let's update |
| 1560 |
# it here. if it was used from supervisor mode, then we have to handle this |
| 1561 |
# as a special case. |
| 1562 |
btst &0x5,EXC_SR(%a6) |
| 1563 |
bne.b fu_out_done_s |
| 1564 |
|
| 1565 |
mov.l EXC_A7(%a6),%a0 # restore a7 |
| 1566 |
mov.l %a0,%usp |
| 1567 |
|
| 1568 |
fu_out_done_cont: |
| 1569 |
fmovm.x EXC_FPREGS(%a6),&0xc0 # restore fp0/fp1 |
| 1570 |
fmovm.l USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs |
| 1571 |
movm.l EXC_DREGS(%a6),&0x0303 # restore d0-d1/a0-a1 |
| 1572 |
|
| 1573 |
unlk %a6 |
| 1574 |
|
| 1575 |
btst &0x7,(%sp) # is trace on? |
| 1576 |
bne.b fu_out_trace # yes |
| 1577 |
|
| 1578 |
bra.l _fpsp_done |
| 1579 |
|
| 1580 |
# is the ea mode pre-decrement of the stack pointer from supervisor mode? |
| 1581 |
# ("fmov.x fpm,-(a7)") if so, |
| 1582 |
fu_out_done_s: |
| 1583 |
cmpi.b SPCOND_FLG(%a6),&mda7_flg |
| 1584 |
bne.b fu_out_done_cont |
| 1585 |
|
| 1586 |
# the extended precision result is still in fp0. but, we need to save it |
| 1587 |
# somewhere on the stack until we can copy it to its final resting place. |
| 1588 |
# here, we're counting on the top of the stack to be the old place-holders |
| 1589 |
# for fp0/fp1 which have already been restored. that way, we can write |
| 1590 |
# over those destinations with the shifted stack frame. |
| 1591 |
fmovm.x &0x80,FP_SRC(%a6) # put answer on stack |
| 1592 |
|
| 1593 |
fmovm.x EXC_FPREGS(%a6),&0xc0 # restore fp0/fp1 |
| 1594 |
fmovm.l USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs |
| 1595 |
movm.l EXC_DREGS(%a6),&0x0303 # restore d0-d1/a0-a1 |
| 1596 |
|
| 1597 |
mov.l (%a6),%a6 # restore frame pointer |
| 1598 |
|
| 1599 |
mov.l LOCAL_SIZE+EXC_SR(%sp),LOCAL_SIZE+EXC_SR-0xc(%sp) |
| 1600 |
mov.l LOCAL_SIZE+2+EXC_PC(%sp),LOCAL_SIZE+2+EXC_PC-0xc(%sp) |
| 1601 |
|
| 1602 |
# now, copy the result to the proper place on the stack |
| 1603 |
mov.l LOCAL_SIZE+FP_SRC_EX(%sp),LOCAL_SIZE+EXC_SR+0x0(%sp) |
| 1604 |
mov.l LOCAL_SIZE+FP_SRC_HI(%sp),LOCAL_SIZE+EXC_SR+0x4(%sp) |
| 1605 |
mov.l LOCAL_SIZE+FP_SRC_LO(%sp),LOCAL_SIZE+EXC_SR+0x8(%sp) |
| 1606 |
|
| 1607 |
add.l &LOCAL_SIZE-0x8,%sp |
| 1608 |
|
| 1609 |
btst &0x7,(%sp) |
| 1610 |
bne.b fu_out_trace |
| 1611 |
|
| 1612 |
bra.l _fpsp_done |
| 1613 |
|
| 1614 |
fu_out_ena: |
| 1615 |
and.b FPSR_EXCEPT(%a6),%d0 # keep only ones enabled |
| 1616 |
bfffo %d0{&24:&8},%d0 # find highest priority exception |
| 1617 |
bne.b fu_out_exc # there is at least one set |
| 1618 |
|
| 1619 |
# no exceptions were set. |
| 1620 |
# if a disabled overflow occurred and inexact was enabled but the result |
| 1621 |
# was exact, then a branch to _real_inex() is made. |
| 1622 |
btst &ovfl_bit,FPSR_EXCEPT(%a6) # was overflow set? |
| 1623 |
beq.w fu_out_done # no |
| 1624 |
|
| 1625 |
fu_out_ovflchk: |
| 1626 |
btst &inex2_bit,FPCR_ENABLE(%a6) # was inexact enabled? |
| 1627 |
beq.w fu_out_done # no |
| 1628 |
bra.w fu_inex # yes |
| 1629 |
|
| 1630 |
# |
| 1631 |
# The fp move out that took the "Unimplemented Data Type" exception was |
| 1632 |
# being traced. Since the stack frames are similar, get the "current" PC |
| 1633 |
# from FPIAR and put it in the trace stack frame then jump to _real_trace(). |
| 1634 |
# |
| 1635 |
# UNSUPP FRAME TRACE FRAME |
| 1636 |
# ***************** ***************** |
| 1637 |
# * EA * * Current * |
| 1638 |
# * * * PC * |
| 1639 |
# ***************** ***************** |
| 1640 |
# * 0x3 * 0x0dc * * 0x2 * 0x024 * |
| 1641 |
# ***************** ***************** |
| 1642 |
# * Next * * Next * |
| 1643 |
# * PC * * PC * |
| 1644 |
# ***************** ***************** |
| 1645 |
# * SR * * SR * |
| 1646 |
# ***************** ***************** |
| 1647 |
# |
| 1648 |
fu_out_trace: |
| 1649 |
mov.w &0x2024,0x6(%sp) |
| 1650 |
fmov.l %fpiar,0x8(%sp) |
| 1651 |
bra.l _real_trace |
| 1652 |
|
| 1653 |
# an exception occurred and that exception was enabled. |
| 1654 |
fu_out_exc: |
| 1655 |
subi.l &24,%d0 # fix offset to be 0-8 |
| 1656 |
|
| 1657 |
# we don't mess with the existing fsave frame. just re-insert it and |
| 1658 |
# jump to the "_real_{}()" handler... |
| 1659 |
mov.w (tbl_fu_out.b,%pc,%d0.w*2),%d0 |
| 1660 |
jmp (tbl_fu_out.b,%pc,%d0.w*1) |
| 1661 |
|
| 1662 |
swbeg &0x8 |
| 1663 |
tbl_fu_out: |
| 1664 |
short tbl_fu_out - tbl_fu_out # BSUN can't happen |
| 1665 |
short tbl_fu_out - tbl_fu_out # SNAN can't happen |
| 1666 |
short fu_operr - tbl_fu_out # OPERR |
| 1667 |
short fu_ovfl - tbl_fu_out # OVFL |
| 1668 |
short fu_unfl - tbl_fu_out # UNFL |
| 1669 |
short tbl_fu_out - tbl_fu_out # DZ can't happen |
| 1670 |
short fu_inex - tbl_fu_out # INEX2 |
| 1671 |
short tbl_fu_out - tbl_fu_out # INEX1 won't make it here |
| 1672 |
|
| 1673 |
# for snan,operr,ovfl,unfl, src op is still in FP_SRC so just |
| 1674 |
# frestore it. |
| 1675 |
fu_snan: |
| 1676 |
fmovm.x EXC_FPREGS(%a6),&0xc0 # restore fp0/fp1 |
| 1677 |
fmovm.l USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs |
| 1678 |
movm.l EXC_DREGS(%a6),&0x0303 # restore d0-d1/a0-a1 |
| 1679 |
|
| 1680 |
mov.w &0x30d8,EXC_VOFF(%a6) # vector offset = 0xd8 |
| 1681 |
mov.w &0xe006,2+FP_SRC(%a6) |
| 1682 |
|
| 1683 |
frestore FP_SRC(%a6) |
| 1684 |
|
| 1685 |
unlk %a6 |
| 1686 |
|
| 1687 |
|
| 1688 |
bra.l _real_snan |
| 1689 |
|
| 1690 |
fu_operr: |
| 1691 |
fmovm.x EXC_FPREGS(%a6),&0xc0 # restore fp0/fp1 |
| 1692 |
fmovm.l USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs |
| 1693 |
movm.l EXC_DREGS(%a6),&0x0303 # restore d0-d1/a0-a1 |
| 1694 |
|
| 1695 |
mov.w &0x30d0,EXC_VOFF(%a6) # vector offset = 0xd0 |
| 1696 |
mov.w &0xe004,2+FP_SRC(%a6) |
| 1697 |
|
| 1698 |
frestore FP_SRC(%a6) |
| 1699 |
|
| 1700 |
unlk %a6 |
| 1701 |
|
| 1702 |
|
| 1703 |
bra.l _real_operr |
| 1704 |
|
| 1705 |
fu_ovfl: |
| 1706 |
fmovm.x &0x40,FP_SRC(%a6) # save EXOP to the stack |
| 1707 |
|
| 1708 |
fmovm.x EXC_FPREGS(%a6),&0xc0 # restore fp0/fp1 |
| 1709 |
fmovm.l USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs |
| 1710 |
movm.l EXC_DREGS(%a6),&0x0303 # restore d0-d1/a0-a1 |
| 1711 |
|
| 1712 |
mov.w &0x30d4,EXC_VOFF(%a6) # vector offset = 0xd4 |
| 1713 |
mov.w &0xe005,2+FP_SRC(%a6) |
| 1714 |
|
| 1715 |
frestore FP_SRC(%a6) # restore EXOP |
| 1716 |
|
| 1717 |
unlk %a6 |
| 1718 |
|
| 1719 |
bra.l _real_ovfl |
| 1720 |
|
| 1721 |
# underflow can happen for extended precision. extended precision opclass |
| 1722 |
# three instruction exceptions don't update the stack pointer. so, if the |
| 1723 |
# exception occurred from user mode, then simply update a7 and exit normally. |
| 1724 |
# if the exception occurred from supervisor mode, check if |
| 1725 |
fu_unfl: |
| 1726 |
mov.l EXC_A6(%a6),(%a6) # restore a6 |
| 1727 |
|
| 1728 |
btst &0x5,EXC_SR(%a6) |
| 1729 |
bne.w fu_unfl_s |
| 1730 |
|
| 1731 |
mov.l EXC_A7(%a6),%a0 # restore a7 whether we need |
| 1732 |
mov.l %a0,%usp # to or not... |
| 1733 |
|
| 1734 |
fu_unfl_cont: |
| 1735 |
fmovm.x &0x40,FP_SRC(%a6) # save EXOP to the stack |
| 1736 |
|
| 1737 |
fmovm.x EXC_FPREGS(%a6),&0xc0 # restore fp0/fp1 |
| 1738 |
fmovm.l USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs |
| 1739 |
movm.l EXC_DREGS(%a6),&0x0303 # restore d0-d1/a0-a1 |
| 1740 |
|
| 1741 |
mov.w &0x30cc,EXC_VOFF(%a6) # vector offset = 0xcc |
| 1742 |
mov.w &0xe003,2+FP_SRC(%a6) |
| 1743 |
|
| 1744 |
frestore FP_SRC(%a6) # restore EXOP |
| 1745 |
|
| 1746 |
unlk %a6 |
| 1747 |
|
| 1748 |
bra.l _real_unfl |
| 1749 |
|
| 1750 |
fu_unfl_s: |
| 1751 |
cmpi.b SPCOND_FLG(%a6),&mda7_flg # was the <ea> mode -(sp)? |
| 1752 |
bne.b fu_unfl_cont |
| 1753 |
|
| 1754 |
# the extended precision result is still in fp0. but, we need to save it |
| 1755 |
# somewhere on the stack until we can copy it to its final resting place |
| 1756 |
# (where the exc frame is currently). make sure it's not at the top of the |
| 1757 |
# frame or it will get overwritten when the exc stack frame is shifted "down". |
| 1758 |
fmovm.x &0x80,FP_SRC(%a6) # put answer on stack |
| 1759 |
fmovm.x &0x40,FP_DST(%a6) # put EXOP on stack |
| 1760 |
|
| 1761 |
fmovm.x EXC_FPREGS(%a6),&0xc0 # restore fp0/fp1 |
| 1762 |
fmovm.l USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs |
| 1763 |
movm.l EXC_DREGS(%a6),&0x0303 # restore d0-d1/a0-a1 |
| 1764 |
|
| 1765 |
mov.w &0x30cc,EXC_VOFF(%a6) # vector offset = 0xcc |
| 1766 |
mov.w &0xe003,2+FP_DST(%a6) |
| 1767 |
|
| 1768 |
frestore FP_DST(%a6) # restore EXOP |
| 1769 |
|
| 1770 |
mov.l (%a6),%a6 # restore frame pointer |
| 1771 |
|
| 1772 |
mov.l LOCAL_SIZE+EXC_SR(%sp),LOCAL_SIZE+EXC_SR-0xc(%sp) |
| 1773 |
mov.l LOCAL_SIZE+2+EXC_PC(%sp),LOCAL_SIZE+2+EXC_PC-0xc(%sp) |
| 1774 |
mov.l LOCAL_SIZE+EXC_EA(%sp),LOCAL_SIZE+EXC_EA-0xc(%sp) |
| 1775 |
|
| 1776 |
# now, copy the result to the proper place on the stack |
| 1777 |
mov.l LOCAL_SIZE+FP_SRC_EX(%sp),LOCAL_SIZE+EXC_SR+0x0(%sp) |
| 1778 |
mov.l LOCAL_SIZE+FP_SRC_HI(%sp),LOCAL_SIZE+EXC_SR+0x4(%sp) |
| 1779 |
mov.l LOCAL_SIZE+FP_SRC_LO(%sp),LOCAL_SIZE+EXC_SR+0x8(%sp) |
| 1780 |
|
| 1781 |
add.l &LOCAL_SIZE-0x8,%sp |
| 1782 |
|
| 1783 |
bra.l _real_unfl |
| 1784 |
|
| 1785 |
# fmove in and out enter here. |
| 1786 |
fu_inex: |
| 1787 |
fmovm.x &0x40,FP_SRC(%a6) # save EXOP to the stack |
| 1788 |
|
| 1789 |
fmovm.x EXC_FPREGS(%a6),&0xc0 # restore fp0/fp1 |
| 1790 |
fmovm.l USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs |
| 1791 |
movm.l EXC_DREGS(%a6),&0x0303 # restore d0-d1/a0-a1 |
| 1792 |
|
| 1793 |
mov.w &0x30c4,EXC_VOFF(%a6) # vector offset = 0xc4 |
| 1794 |
mov.w &0xe001,2+FP_SRC(%a6) |
| 1795 |
|
| 1796 |
frestore FP_SRC(%a6) # restore EXOP |
| 1797 |
|
| 1798 |
unlk %a6 |
| 1799 |
|
| 1800 |
|
| 1801 |
bra.l _real_inex |
| 1802 |
|
| 1803 |
######################################################################### |
| 1804 |
######################################################################### |
| 1805 |
fu_in_pack: |
| 1806 |
|
| 1807 |
|
| 1808 |
# I'm not sure at this point what FPSR bits are valid for this instruction. |
| 1809 |
# so, since the emulation routines re-create them anyways, zero exception field |
| 1810 |
andi.l &0x0ff00ff,USER_FPSR(%a6) # zero exception field |
| 1811 |
|
| 1812 |
fmov.l &0x0,%fpcr # zero current control regs |
| 1813 |
fmov.l &0x0,%fpsr |
| 1814 |
|
| 1815 |
bsr.l get_packed # fetch packed src operand |
| 1816 |
|
| 1817 |
lea FP_SRC(%a6),%a0 # pass ptr to src |
| 1818 |
bsr.l set_tag_x # set src optype tag |
| 1819 |
|
| 1820 |
mov.b %d0,STAG(%a6) # save src optype tag |
| 1821 |
|
| 1822 |
bfextu EXC_CMDREG(%a6){&6:&3},%d0 # dyadic; load dst reg |
| 1823 |
|
| 1824 |
# bit five of the fp extension word separates the monadic and dyadic operations |
| 1825 |
# at this point |
| 1826 |
btst &0x5,1+EXC_CMDREG(%a6) # is operation monadic or dyadic? |
| 1827 |
beq.b fu_extract_p # monadic |
| 1828 |
cmpi.b 1+EXC_CMDREG(%a6),&0x3a # is operation an ftst? |
| 1829 |
beq.b fu_extract_p # yes, so it's monadic, too |
| 1830 |
|
| 1831 |
bsr.l load_fpn2 # load dst into FP_DST |
| 1832 |
|
| 1833 |
lea FP_DST(%a6),%a0 # pass: ptr to dst op |
| 1834 |
bsr.l set_tag_x # tag the operand type |
| 1835 |
cmpi.b %d0,&UNNORM # is operand an UNNORM? |
| 1836 |
bne.b fu_op2_done_p # no |
| 1837 |
bsr.l unnorm_fix # yes; convert to NORM,DENORM,or ZERO |
| 1838 |
fu_op2_done_p: |
| 1839 |
mov.b %d0,DTAG(%a6) # save dst optype tag |
| 1840 |
|
| 1841 |
fu_extract_p: |
| 1842 |
clr.l %d0 |
| 1843 |
mov.b FPCR_MODE(%a6),%d0 # fetch rnd mode/prec |
| 1844 |
|
| 1845 |
bfextu 1+EXC_CMDREG(%a6){&1:&7},%d1 # extract extension |
| 1846 |
|
| 1847 |
lea FP_SRC(%a6),%a0 |
| 1848 |
lea FP_DST(%a6),%a1 |
| 1849 |
|
| 1850 |
mov.l (tbl_unsupp.l,%pc,%d1.l*4),%d1 # fetch routine addr |
| 1851 |
jsr (tbl_unsupp.l,%pc,%d1.l*1) |
| 1852 |
|
| 1853 |
# |
| 1854 |
# Exceptions in order of precedence: |
| 1855 |
# BSUN : none |
| 1856 |
# SNAN : all dyadic ops |
| 1857 |
# OPERR : fsqrt(-NORM) |
| 1858 |
# OVFL : all except ftst,fcmp |
| 1859 |
# UNFL : all except ftst,fcmp |
| 1860 |
# DZ : fdiv |
| 1861 |
# INEX2 : all except ftst,fcmp |
| 1862 |
# INEX1 : all |
| 1863 |
# |
| 1864 |
|
| 1865 |
# we determine the highest priority exception(if any) set by the |
| 1866 |
# emulation routine that has also been enabled by the user. |
| 1867 |
mov.b FPCR_ENABLE(%a6),%d0 # fetch exceptions enabled |
| 1868 |
bne.w fu_in_ena_p # some are enabled |
| 1869 |
|
| 1870 |
fu_in_cont_p: |
| 1871 |
# fcmp and ftst do not store any result. |
| 1872 |
mov.b 1+EXC_CMDREG(%a6),%d0 # fetch extension |
| 1873 |
andi.b &0x38,%d0 # extract bits 3-5 |
| 1874 |
cmpi.b %d0,&0x38 # is instr fcmp or ftst? |
| 1875 |
beq.b fu_in_exit_p # yes |
| 1876 |
|
| 1877 |
bfextu EXC_CMDREG(%a6){&6:&3},%d0 # dyadic; load dst reg |
| 1878 |
bsr.l store_fpreg # store the result |
| 1879 |
|
| 1880 |
fu_in_exit_p: |
| 1881 |
|
| 1882 |
btst &0x5,EXC_SR(%a6) # user or supervisor? |
| 1883 |
bne.w fu_in_exit_s_p # supervisor |
| 1884 |
|
| 1885 |
mov.l EXC_A7(%a6),%a0 # update user a7 |
| 1886 |
mov.l %a0,%usp |
| 1887 |
|
| 1888 |
fu_in_exit_cont_p: |
| 1889 |
fmovm.x EXC_FPREGS(%a6),&0xc0 # restore fp0/fp1 |
| 1890 |
fmovm.l USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs |
| 1891 |
movm.l EXC_DREGS(%a6),&0x0303 # restore d0-d1/a0-a1 |
| 1892 |
|
| 1893 |
unlk %a6 # unravel stack frame |
| 1894 |
|
| 1895 |
btst &0x7,(%sp) # is trace on? |
| 1896 |
bne.w fu_trace_p # yes |
| 1897 |
|
| 1898 |
bra.l _fpsp_done # exit to os |
| 1899 |
|
| 1900 |
# the exception occurred in supervisor mode. check to see if the |
| 1901 |
# addressing mode was (a7)+. if so, we'll need to shift the |
| 1902 |
# stack frame "up". |
| 1903 |
fu_in_exit_s_p: |
| 1904 |
btst &mia7_bit,SPCOND_FLG(%a6) # was ea mode (a7)+ |
| 1905 |
beq.b fu_in_exit_cont_p # no |
| 1906 |
|
| 1907 |
fmovm.x EXC_FPREGS(%a6),&0xc0 # restore fp0/fp1 |
| 1908 |
fmovm.l USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs |
| 1909 |
movm.l EXC_DREGS(%a6),&0x0303 # restore d0-d1/a0-a1 |
| 1910 |
|
| 1911 |
unlk %a6 # unravel stack frame |
| 1912 |
|
| 1913 |
# shift the stack frame "up". we don't really care about the <ea> field. |
| 1914 |
mov.l 0x4(%sp),0x10(%sp) |
| 1915 |
mov.l 0x0(%sp),0xc(%sp) |
| 1916 |
add.l &0xc,%sp |
| 1917 |
|
| 1918 |
btst &0x7,(%sp) # is trace on? |
| 1919 |
bne.w fu_trace_p # yes |
| 1920 |
|
| 1921 |
bra.l _fpsp_done # exit to os |
| 1922 |
|
| 1923 |
fu_in_ena_p: |
| 1924 |
and.b FPSR_EXCEPT(%a6),%d0 # keep only ones enabled & set |
| 1925 |
bfffo %d0{&24:&8},%d0 # find highest priority exception |
| 1926 |
bne.b fu_in_exc_p # at least one was set |
| 1927 |
|
| 1928 |
# |
| 1929 |
# No exceptions occurred that were also enabled. Now: |
| 1930 |
# |
| 1931 |
# if (OVFL && ovfl_disabled && inexact_enabled) { |
| 1932 |
# branch to _real_inex() (even if the result was exact!); |
| 1933 |
# } else { |
| 1934 |
# save the result in the proper fp reg (unless the op is fcmp or ftst); |
| 1935 |
# return; |
| 1936 |
# } |
| 1937 |
# |
| 1938 |
btst &ovfl_bit,FPSR_EXCEPT(%a6) # was overflow set? |
| 1939 |
beq.w fu_in_cont_p # no |
| 1940 |
|
| 1941 |
fu_in_ovflchk_p: |
| 1942 |
btst &inex2_bit,FPCR_ENABLE(%a6) # was inexact enabled? |
| 1943 |
beq.w fu_in_cont_p # no |
| 1944 |
bra.w fu_in_exc_ovfl_p # do _real_inex() now |
| 1945 |
|
| 1946 |
# |
| 1947 |
# An exception occurred and that exception was enabled: |
| 1948 |
# |
| 1949 |
# shift enabled exception field into lo byte of d0; |
| 1950 |
# if (((INEX2 || INEX1) && inex_enabled && OVFL && ovfl_disabled) || |
| 1951 |
# ((INEX2 || INEX1) && inex_enabled && UNFL && unfl_disabled)) { |
| 1952 |
# /* |
| 1953 |
# * this is the case where we must call _real_inex() now or else |
| 1954 |
# * there will be no other way to pass it the exceptional operand |
| 1955 |
# */ |
| 1956 |
# call _real_inex(); |
| 1957 |
# } else { |
| 1958 |
# restore exc state (SNAN||OPERR||OVFL||UNFL||DZ||INEX) into the FPU; |
| 1959 |
# } |
| 1960 |
# |
| 1961 |
fu_in_exc_p: |
| 1962 |
subi.l &24,%d0 # fix offset to be 0-8 |
| 1963 |
cmpi.b %d0,&0x6 # is exception INEX? (6 or 7) |
| 1964 |
blt.b fu_in_exc_exit_p # no |
| 1965 |
|
| 1966 |
# the enabled exception was inexact |
| 1967 |
btst &unfl_bit,FPSR_EXCEPT(%a6) # did disabled underflow occur? |
| 1968 |
bne.w fu_in_exc_unfl_p # yes |
| 1969 |
btst &ovfl_bit,FPSR_EXCEPT(%a6) # did disabled overflow occur? |
| 1970 |
bne.w fu_in_exc_ovfl_p # yes |
| 1971 |
|
| 1972 |
# here, we insert the correct fsave status value into the fsave frame for the |
| 1973 |
# corresponding exception. the operand in the fsave frame should be the original |
| 1974 |
# src operand. |
| 1975 |
# as a reminder for future predicted pain and agony, we are passing in fsave the |
| 1976 |
# "non-skewed" operand for cases of sgl and dbl src INFs,NANs, and DENORMs. |
| 1977 |
# this is INCORRECT for enabled SNAN which would give to the user the skewed SNAN!!! |
| 1978 |
fu_in_exc_exit_p: |
| 1979 |
btst &0x5,EXC_SR(%a6) # user or supervisor? |
| 1980 |
bne.w fu_in_exc_exit_s_p # supervisor |
| 1981 |
|
| 1982 |
mov.l EXC_A7(%a6),%a0 # update user a7 |
| 1983 |
mov.l %a0,%usp |
| 1984 |
|
| 1985 |
fu_in_exc_exit_cont_p: |
| 1986 |
mov.w (tbl_except_p.b,%pc,%d0.w*2),2+FP_SRC(%a6) |
| 1987 |
|
| 1988 |
fmovm.x EXC_FPREGS(%a6),&0xc0 # restore fp0/fp1 |
| 1989 |
fmovm.l USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs |
| 1990 |
movm.l EXC_DREGS(%a6),&0x0303 # restore d0-d1/a0-a1 |
| 1991 |
|
| 1992 |
frestore FP_SRC(%a6) # restore src op |
| 1993 |
|
| 1994 |
unlk %a6 |
| 1995 |
|
| 1996 |
btst &0x7,(%sp) # is trace enabled? |
| 1997 |
bne.w fu_trace_p # yes |
| 1998 |
|
| 1999 |
bra.l _fpsp_done |
| 2000 |
|
| 2001 |
tbl_except_p: |
| 2002 |
short 0xe000,0xe006,0xe004,0xe005 |
| 2003 |
short 0xe003,0xe002,0xe001,0xe001 |
| 2004 |
|
| 2005 |
fu_in_exc_ovfl_p: |
| 2006 |
mov.w &0x3,%d0 |
| 2007 |
bra.w fu_in_exc_exit_p |
| 2008 |
|
| 2009 |
fu_in_exc_unfl_p: |
| 2010 |
mov.w &0x4,%d0 |
| 2011 |
bra.w fu_in_exc_exit_p |
| 2012 |
|
| 2013 |
fu_in_exc_exit_s_p: |
| 2014 |
btst &mia7_bit,SPCOND_FLG(%a6) |
| 2015 |
beq.b fu_in_exc_exit_cont_p |
| 2016 |
|
| 2017 |
mov.w (tbl_except_p.b,%pc,%d0.w*2),2+FP_SRC(%a6) |
| 2018 |
|
| 2019 |
fmovm.x EXC_FPREGS(%a6),&0xc0 # restore fp0/fp1 |
| 2020 |
fmovm.l USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs |
| 2021 |
movm.l EXC_DREGS(%a6),&0x0303 # restore d0-d1/a0-a1 |
| 2022 |
|
| 2023 |
frestore FP_SRC(%a6) # restore src op |
| 2024 |
|
| 2025 |
unlk %a6 # unravel stack frame |
| 2026 |
|
| 2027 |
# shift stack frame "up". who cares about <ea> field. |
| 2028 |
mov.l 0x4(%sp),0x10(%sp) |
| 2029 |
mov.l 0x0(%sp),0xc(%sp) |
| 2030 |
add.l &0xc,%sp |
| 2031 |
|
| 2032 |
btst &0x7,(%sp) # is trace on? |
| 2033 |
bne.b fu_trace_p # yes |
| 2034 |
|
| 2035 |
bra.l _fpsp_done # exit to os |
| 2036 |
|
| 2037 |
# |
| 2038 |
# The opclass two PACKED instruction that took an "Unimplemented Data Type" |
| 2039 |
# exception was being traced. Make the "current" PC the FPIAR and put it in the |
| 2040 |
# trace stack frame then jump to _real_trace(). |
| 2041 |
# |
| 2042 |
# UNSUPP FRAME TRACE FRAME |
| 2043 |
# ***************** ***************** |
| 2044 |
# * EA * * Current * |
| 2045 |
# * * * PC * |
| 2046 |
# ***************** ***************** |
| 2047 |
# * 0x2 * 0x0dc * * 0x2 * 0x024 * |
| 2048 |
# ***************** ***************** |
| 2049 |
# * Next * * Next * |
| 2050 |
# * PC * * PC * |
| 2051 |
# ***************** ***************** |
| 2052 |
# * SR * * SR * |
| 2053 |
# ***************** ***************** |
| 2054 |
fu_trace_p: |
| 2055 |
mov.w &0x2024,0x6(%sp) |
| 2056 |
fmov.l %fpiar,0x8(%sp) |
| 2057 |
|
| 2058 |
bra.l _real_trace |
| 2059 |
|
| 2060 |
######################################################### |
| 2061 |
######################################################### |
| 2062 |
fu_out_pack: |
| 2063 |
|
| 2064 |
|
| 2065 |
# I'm not sure at this point what FPSR bits are valid for this instruction. |
| 2066 |
# so, since the emulation routines re-create them anyways, zero exception field. |
| 2067 |
# fmove out doesn't affect ccodes. |
| 2068 |
and.l &0xffff00ff,USER_FPSR(%a6) # zero exception field |
| 2069 |
|
| 2070 |
fmov.l &0x0,%fpcr # zero current control regs |
| 2071 |
fmov.l &0x0,%fpsr |
| 2072 |
|
| 2073 |
bfextu EXC_CMDREG(%a6){&6:&3},%d0 |
| 2074 |
bsr.l load_fpn1 |
| 2075 |
|
| 2076 |
# unlike other opclass 3, unimplemented data type exceptions, packed must be |
| 2077 |
# able to detect all operand types. |
| 2078 |
lea FP_SRC(%a6),%a0 |
| 2079 |
bsr.l set_tag_x # tag the operand type |
| 2080 |
cmpi.b %d0,&UNNORM # is operand an UNNORM? |
| 2081 |
bne.b fu_op2_p # no |
| 2082 |
bsr.l unnorm_fix # yes; convert to NORM,DENORM,or ZERO |
| 2083 |
|
| 2084 |
fu_op2_p: |
| 2085 |
mov.b %d0,STAG(%a6) # save src optype tag |
| 2086 |
|
| 2087 |
clr.l %d0 |
| 2088 |
mov.b FPCR_MODE(%a6),%d0 # fetch rnd mode/prec |
| 2089 |
|
| 2090 |
lea FP_SRC(%a6),%a0 # pass ptr to src operand |
| 2091 |
|
| 2092 |
mov.l (%a6),EXC_A6(%a6) # in case a6 changes |
| 2093 |
bsr.l fout # call fmove out routine |
| 2094 |
|
| 2095 |
# Exceptions in order of precedence: |
| 2096 |
# BSUN : no |
| 2097 |
# SNAN : yes |
| 2098 |
# OPERR : if ((k_factor > +17) || (dec. exp exceeds 3 digits)) |
| 2099 |
# OVFL : no |
| 2100 |
# UNFL : no |
| 2101 |
# DZ : no |
| 2102 |
# INEX2 : yes |
| 2103 |
# INEX1 : no |
| 2104 |
|
| 2105 |
# determine the highest priority exception(if any) set by the |
| 2106 |
# emulation routine that has also been enabled by the user. |
| 2107 |
mov.b FPCR_ENABLE(%a6),%d0 # fetch exceptions enabled |
| 2108 |
bne.w fu_out_ena_p # some are enabled |
| 2109 |
|
| 2110 |
fu_out_exit_p: |
| 2111 |
mov.l EXC_A6(%a6),(%a6) # restore a6 |
| 2112 |
|
| 2113 |
btst &0x5,EXC_SR(%a6) # user or supervisor? |
| 2114 |
bne.b fu_out_exit_s_p # supervisor |
| 2115 |
|
| 2116 |
mov.l EXC_A7(%a6),%a0 # update user a7 |
| 2117 |
mov.l %a0,%usp |
| 2118 |
|
| 2119 |
fu_out_exit_cont_p: |
| 2120 |
fmovm.x EXC_FPREGS(%a6),&0xc0 # restore fp0/fp1 |
| 2121 |
fmovm.l USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs |
| 2122 |
movm.l EXC_DREGS(%a6),&0x0303 # restore d0-d1/a0-a1 |
| 2123 |
|
| 2124 |
unlk %a6 # unravel stack frame |
| 2125 |
|
| 2126 |
btst &0x7,(%sp) # is trace on? |
| 2127 |
bne.w fu_trace_p # yes |
| 2128 |
|
| 2129 |
bra.l _fpsp_done # exit to os |
| 2130 |
|
| 2131 |
# the exception occurred in supervisor mode. check to see if the |
| 2132 |
# addressing mode was -(a7). if so, we'll need to shift the |
| 2133 |
# stack frame "down". |
| 2134 |
fu_out_exit_s_p: |
| 2135 |
btst &mda7_bit,SPCOND_FLG(%a6) # was ea mode -(a7) |
| 2136 |
beq.b fu_out_exit_cont_p # no |
| 2137 |
|
| 2138 |
fmovm.x EXC_FPREGS(%a6),&0xc0 # restore fp0/fp1 |
| 2139 |
fmovm.l USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs |
| 2140 |
movm.l EXC_DREGS(%a6),&0x0303 # restore d0-d1/a0-a1 |
| 2141 |
|
| 2142 |
mov.l (%a6),%a6 # restore frame pointer |
| 2143 |
|
| 2144 |
mov.l LOCAL_SIZE+EXC_SR(%sp),LOCAL_SIZE+EXC_SR-0xc(%sp) |
| 2145 |
mov.l LOCAL_SIZE+2+EXC_PC(%sp),LOCAL_SIZE+2+EXC_PC-0xc(%sp) |
| 2146 |
|
| 2147 |
# now, copy the result to the proper place on the stack |
| 2148 |
mov.l LOCAL_SIZE+FP_DST_EX(%sp),LOCAL_SIZE+EXC_SR+0x0(%sp) |
| 2149 |
mov.l LOCAL_SIZE+FP_DST_HI(%sp),LOCAL_SIZE+EXC_SR+0x4(%sp) |
| 2150 |
mov.l LOCAL_SIZE+FP_DST_LO(%sp),LOCAL_SIZE+EXC_SR+0x8(%sp) |
| 2151 |
|
| 2152 |
add.l &LOCAL_SIZE-0x8,%sp |
| 2153 |
|
| 2154 |
btst &0x7,(%sp) |
| 2155 |
bne.w fu_trace_p |
| 2156 |
|
| 2157 |
bra.l _fpsp_done |
| 2158 |
|
| 2159 |
fu_out_ena_p: |
| 2160 |
and.b FPSR_EXCEPT(%a6),%d0 # keep only ones enabled |
| 2161 |
bfffo %d0{&24:&8},%d0 # find highest priority exception |
| 2162 |
beq.w fu_out_exit_p |
| 2163 |
|
| 2164 |
mov.l EXC_A6(%a6),(%a6) # restore a6 |
| 2165 |
|
| 2166 |
# an exception occurred and that exception was enabled. |
| 2167 |
# the only exception possible on packed move out are INEX, OPERR, and SNAN. |
| 2168 |
fu_out_exc_p: |
| 2169 |
cmpi.b %d0,&0x1a |
| 2170 |
bgt.w fu_inex_p2 |
| 2171 |
beq.w fu_operr_p |
| 2172 |
|
| 2173 |
fu_snan_p: |
| 2174 |
btst &0x5,EXC_SR(%a6) |
| 2175 |
bne.b fu_snan_s_p |
| 2176 |
|
| 2177 |
mov.l EXC_A7(%a6),%a0 |
| 2178 |
mov.l %a0,%usp |
| 2179 |
bra.w fu_snan |
| 2180 |
|
| 2181 |
fu_snan_s_p: |
| 2182 |
cmpi.b SPCOND_FLG(%a6),&mda7_flg |
| 2183 |
bne.w fu_snan |
| 2184 |
|
| 2185 |
# the instruction was "fmove.p fpn,-(a7)" from supervisor mode. |
| 2186 |
# the strategy is to move the exception frame "down" 12 bytes. then, we |
| 2187 |
# can store the default result where the exception frame was. |
| 2188 |
fmovm.x EXC_FPREGS(%a6),&0xc0 # restore fp0/fp1 |
| 2189 |
fmovm.l USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs |
| 2190 |
movm.l EXC_DREGS(%a6),&0x0303 # restore d0-d1/a0-a1 |
| 2191 |
|
| 2192 |
mov.w &0x30d8,EXC_VOFF(%a6) # vector offset = 0xd0 |
| 2193 |
mov.w &0xe006,2+FP_SRC(%a6) # set fsave status |
| 2194 |
|
| 2195 |
frestore FP_SRC(%a6) # restore src operand |
| 2196 |
|
| 2197 |
mov.l (%a6),%a6 # restore frame pointer |
| 2198 |
|
| 2199 |
mov.l LOCAL_SIZE+EXC_SR(%sp),LOCAL_SIZE+EXC_SR-0xc(%sp) |
| 2200 |
mov.l LOCAL_SIZE+2+EXC_PC(%sp),LOCAL_SIZE+2+EXC_PC-0xc(%sp) |
| 2201 |
mov.l LOCAL_SIZE+EXC_EA(%sp),LOCAL_SIZE+EXC_EA-0xc(%sp) |
| 2202 |
|
| 2203 |
# now, we copy the default result to its proper location |
| 2204 |
mov.l LOCAL_SIZE+FP_DST_EX(%sp),LOCAL_SIZE+0x4(%sp) |
| 2205 |
mov.l LOCAL_SIZE+FP_DST_HI(%sp),LOCAL_SIZE+0x8(%sp) |
| 2206 |
mov.l LOCAL_SIZE+FP_DST_LO(%sp),LOCAL_SIZE+0xc(%sp) |
| 2207 |
|
| 2208 |
add.l &LOCAL_SIZE-0x8,%sp |
| 2209 |
|
| 2210 |
|
| 2211 |
bra.l _real_snan |
| 2212 |
|
| 2213 |
fu_operr_p: |
| 2214 |
btst &0x5,EXC_SR(%a6) |
| 2215 |
bne.w fu_operr_p_s |
| 2216 |
|
| 2217 |
mov.l EXC_A7(%a6),%a0 |
| 2218 |
mov.l %a0,%usp |
| 2219 |
bra.w fu_operr |
| 2220 |
|
| 2221 |
fu_operr_p_s: |
| 2222 |
cmpi.b SPCOND_FLG(%a6),&mda7_flg |
| 2223 |
bne.w fu_operr |
| 2224 |
|
| 2225 |
# the instruction was "fmove.p fpn,-(a7)" from supervisor mode. |
| 2226 |
# the strategy is to move the exception frame "down" 12 bytes. then, we |
| 2227 |
# can store the default result where the exception frame was. |
| 2228 |
fmovm.x EXC_FPREGS(%a6),&0xc0 # restore fp0/fp1 |
| 2229 |
fmovm.l USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs |
| 2230 |
movm.l EXC_DREGS(%a6),&0x0303 # restore d0-d1/a0-a1 |
| 2231 |
|
| 2232 |
mov.w &0x30d0,EXC_VOFF(%a6) # vector offset = 0xd0 |
| 2233 |
mov.w &0xe004,2+FP_SRC(%a6) # set fsave status |
| 2234 |
|
| 2235 |
frestore FP_SRC(%a6) # restore src operand |
| 2236 |
|
| 2237 |
mov.l (%a6),%a6 # restore frame pointer |
| 2238 |
|
| 2239 |
mov.l LOCAL_SIZE+EXC_SR(%sp),LOCAL_SIZE+EXC_SR-0xc(%sp) |
| 2240 |
mov.l LOCAL_SIZE+2+EXC_PC(%sp),LOCAL_SIZE+2+EXC_PC-0xc(%sp) |
| 2241 |
mov.l LOCAL_SIZE+EXC_EA(%sp),LOCAL_SIZE+EXC_EA-0xc(%sp) |
| 2242 |
|
| 2243 |
# now, we copy the default result to its proper location |
| 2244 |
mov.l LOCAL_SIZE+FP_DST_EX(%sp),LOCAL_SIZE+0x4(%sp) |
| 2245 |
mov.l LOCAL_SIZE+FP_DST_HI(%sp),LOCAL_SIZE+0x8(%sp) |
| 2246 |
mov.l LOCAL_SIZE+FP_DST_LO(%sp),LOCAL_SIZE+0xc(%sp) |
| 2247 |
|
| 2248 |
add.l &LOCAL_SIZE-0x8,%sp |
| 2249 |
|
| 2250 |
|
| 2251 |
bra.l _real_operr |
| 2252 |
|
| 2253 |
fu_inex_p2: |
| 2254 |
btst &0x5,EXC_SR(%a6) |
| 2255 |
bne.w fu_inex_s_p2 |
| 2256 |
|
| 2257 |
mov.l EXC_A7(%a6),%a0 |
| 2258 |
mov.l %a0,%usp |
| 2259 |
bra.w fu_inex |
| 2260 |
|
| 2261 |
fu_inex_s_p2: |
| 2262 |
cmpi.b SPCOND_FLG(%a6),&mda7_flg |
| 2263 |
bne.w fu_inex |
| 2264 |
|
| 2265 |
# the instruction was "fmove.p fpn,-(a7)" from supervisor mode. |
| 2266 |
# the strategy is to move the exception frame "down" 12 bytes. then, we |
| 2267 |
# can store the default result where the exception frame was. |
| 2268 |
fmovm.x EXC_FPREGS(%a6),&0xc0 # restore fp0/fp1 |
| 2269 |
fmovm.l USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs |
| 2270 |
movm.l EXC_DREGS(%a6),&0x0303 # restore d0-d1/a0-a1 |
| 2271 |
|
| 2272 |
mov.w &0x30c4,EXC_VOFF(%a6) # vector offset = 0xc4 |
| 2273 |
mov.w &0xe001,2+FP_SRC(%a6) # set fsave status |
| 2274 |
|
| 2275 |
frestore FP_SRC(%a6) # restore src operand |
| 2276 |
|
| 2277 |
mov.l (%a6),%a6 # restore frame pointer |
| 2278 |
|
| 2279 |
mov.l LOCAL_SIZE+EXC_SR(%sp),LOCAL_SIZE+EXC_SR-0xc(%sp) |
| 2280 |
mov.l LOCAL_SIZE+2+EXC_PC(%sp),LOCAL_SIZE+2+EXC_PC-0xc(%sp) |
| 2281 |
mov.l LOCAL_SIZE+EXC_EA(%sp),LOCAL_SIZE+EXC_EA-0xc(%sp) |
| 2282 |
|
| 2283 |
# now, we copy the default result to its proper location |
| 2284 |
mov.l LOCAL_SIZE+FP_DST_EX(%sp),LOCAL_SIZE+0x4(%sp) |
| 2285 |
mov.l LOCAL_SIZE+FP_DST_HI(%sp),LOCAL_SIZE+0x8(%sp) |
| 2286 |
mov.l LOCAL_SIZE+FP_DST_LO(%sp),LOCAL_SIZE+0xc(%sp) |
| 2287 |
|
| 2288 |
add.l &LOCAL_SIZE-0x8,%sp |
| 2289 |
|
| 2290 |
|
| 2291 |
bra.l _real_inex |
| 2292 |
|
| 2293 |
######################################################################### |
| 2294 |
|
| 2295 |
# |
| 2296 |
# if we're stuffing a source operand back into an fsave frame then we |
| 2297 |
# have to make sure that for single or double source operands that the |
| 2298 |
# format stuffed is as weird as the hardware usually makes it. |
| 2299 |
# |
| 2300 |
global funimp_skew |
| 2301 |
funimp_skew: |
| 2302 |
bfextu EXC_EXTWORD(%a6){&3:&3},%d0 # extract src specifier |
| 2303 |
cmpi.b %d0,&0x1 # was src sgl? |
| 2304 |
beq.b funimp_skew_sgl # yes |
| 2305 |
cmpi.b %d0,&0x5 # was src dbl? |
| 2306 |
beq.b funimp_skew_dbl # yes |
| 2307 |
rts |
| 2308 |
|
| 2309 |
funimp_skew_sgl: |
| 2310 |
mov.w FP_SRC_EX(%a6),%d0 # fetch DENORM exponent |
| 2311 |
andi.w &0x7fff,%d0 # strip sign |
| 2312 |
beq.b funimp_skew_sgl_not |
| 2313 |
cmpi.w %d0,&0x3f80 |
| 2314 |
bgt.b funimp_skew_sgl_not |
| 2315 |
neg.w %d0 # make exponent negative |
| 2316 |
addi.w &0x3f81,%d0 # find amt to shift |
| 2317 |
mov.l FP_SRC_HI(%a6),%d1 # fetch DENORM hi(man) |
| 2318 |
lsr.l %d0,%d1 # shift it |
| 2319 |
bset &31,%d1 # set j-bit |
| 2320 |
mov.l %d1,FP_SRC_HI(%a6) # insert new hi(man) |
| 2321 |
andi.w &0x8000,FP_SRC_EX(%a6) # clear old exponent |
| 2322 |
ori.w &0x3f80,FP_SRC_EX(%a6) # insert new "skewed" exponent |
| 2323 |
funimp_skew_sgl_not: |
| 2324 |
rts |
| 2325 |
|
| 2326 |
funimp_skew_dbl: |
| 2327 |
mov.w FP_SRC_EX(%a6),%d0 # fetch DENORM exponent |
| 2328 |
andi.w &0x7fff,%d0 # strip sign |
| 2329 |
beq.b funimp_skew_dbl_not |
| 2330 |
cmpi.w %d0,&0x3c00 |
| 2331 |
bgt.b funimp_skew_dbl_not |
| 2332 |
|
| 2333 |
tst.b FP_SRC_EX(%a6) # make "internal format" |
| 2334 |
smi.b 0x2+FP_SRC(%a6) |
| 2335 |
mov.w %d0,FP_SRC_EX(%a6) # insert exponent with cleared sign |
| 2336 |
clr.l %d0 # clear g,r,s |
| 2337 |
lea FP_SRC(%a6),%a0 # pass ptr to src op |
| 2338 |
mov.w &0x3c01,%d1 # pass denorm threshold |
| 2339 |
bsr.l dnrm_lp # denorm it |
| 2340 |
mov.w &0x3c00,%d0 # new exponent |
| 2341 |
tst.b 0x2+FP_SRC(%a6) # is sign set? |
| 2342 |
beq.b fss_dbl_denorm_done # no |
| 2343 |
bset &15,%d0 # set sign |
| 2344 |
fss_dbl_denorm_done: |
| 2345 |
bset &0x7,FP_SRC_HI(%a6) # set j-bit |
| 2346 |
mov.w %d0,FP_SRC_EX(%a6) # insert new exponent |
| 2347 |
funimp_skew_dbl_not: |
| 2348 |
rts |
| 2349 |
|
| 2350 |
######################################################################### |
| 2351 |
global _mem_write2 |
| 2352 |
_mem_write2: |
| 2353 |
btst &0x5,EXC_SR(%a6) |
| 2354 |
beq.l _dmem_write |
| 2355 |
mov.l 0x0(%a0),FP_DST_EX(%a6) |
| 2356 |
mov.l 0x4(%a0),FP_DST_HI(%a6) |
| 2357 |
mov.l 0x8(%a0),FP_DST_LO(%a6) |
| 2358 |
clr.l %d1 |
| 2359 |
rts |
| 2360 |
|
| 2361 |
######################################################################### |
| 2362 |
# XDEF **************************************************************** # |
| 2363 |
# _fpsp_effadd(): 060FPSP entry point for FP "Unimplemented # |
| 2364 |
# effective address" exception. # |
| 2365 |
# # |
| 2366 |
# This handler should be the first code executed upon taking the # |
| 2367 |
# FP Unimplemented Effective Address exception in an operating # |
| 2368 |
# system. # |
| 2369 |
# # |
| 2370 |
# XREF **************************************************************** # |
| 2371 |
# _imem_read_long() - read instruction longword # |
| 2372 |
# fix_skewed_ops() - adjust src operand in fsave frame # |
| 2373 |
# set_tag_x() - determine optype of src/dst operands # |
| 2374 |
# store_fpreg() - store opclass 0 or 2 result to FP regfile # |
| 2375 |
# unnorm_fix() - change UNNORM operands to NORM or ZERO # |
| 2376 |
# load_fpn2() - load dst operand from FP regfile # |
| 2377 |
# tbl_unsupp - add of table of emulation routines for opclass 0,2 # |
| 2378 |
# decbin() - convert packed data to FP binary data # |
| 2379 |
# _real_fpu_disabled() - "callout" for "FPU disabled" exception # |
| 2380 |
# _real_access() - "callout" for access error exception # |
| 2381 |
# _mem_read() - read extended immediate operand from memory # |
| 2382 |
# _fpsp_done() - "callout" for exit; work all done # |
| 2383 |
# _real_trace() - "callout" for Trace enabled exception # |
| 2384 |
# fmovm_dynamic() - emulate dynamic fmovm instruction # |
| 2385 |
# fmovm_ctrl() - emulate fmovm control instruction # |
| 2386 |
# # |
| 2387 |
# INPUT *************************************************************** # |
| 2388 |
# - The system stack contains the "Unimplemented <ea>" stk frame # |
| 2389 |
# # |
| 2390 |
# OUTPUT ************************************************************** # |
| 2391 |
# If access error: # |
| 2392 |
# - The system stack is changed to an access error stack frame # |
| 2393 |
# If FPU disabled: # |
| 2394 |
# - The system stack is changed to an FPU disabled stack frame # |
| 2395 |
# If Trace exception enabled: # |
| 2396 |
# - The system stack is changed to a Trace exception stack frame # |
| 2397 |
# Else: (normal case) # |
| 2398 |
# - None (correct result has been stored as appropriate) # |
| 2399 |
# # |
| 2400 |
# ALGORITHM *********************************************************** # |
| 2401 |
# This exception handles 3 types of operations: # |
| 2402 |
# (1) FP Instructions using extended precision or packed immediate # |
| 2403 |
# addressing mode. # |
| 2404 |
# (2) The "fmovm.x" instruction w/ dynamic register specification. # |
| 2405 |
# (3) The "fmovm.l" instruction w/ 2 or 3 control registers. # |
| 2406 |
# # |
| 2407 |
# For immediate data operations, the data is read in w/ a # |
| 2408 |
# _mem_read() "callout", converted to FP binary (if packed), and used # |
| 2409 |
# as the source operand to the instruction specified by the instruction # |
| 2410 |
# word. If no FP exception should be reported ads a result of the # |
| 2411 |
# emulation, then the result is stored to the destination register and # |
| 2412 |
# the handler exits through _fpsp_done(). If an enabled exc has been # |
| 2413 |
# signalled as a result of emulation, then an fsave state frame # |
| 2414 |
# corresponding to the FP exception type must be entered into the 060 # |
| 2415 |
# FPU before exiting. In either the enabled or disabled cases, we # |
| 2416 |
# must also check if a Trace exception is pending, in which case, we # |
| 2417 |
# must create a Trace exception stack frame from the current exception # |
| 2418 |
# stack frame. If no Trace is pending, we simply exit through # |
| 2419 |
# _fpsp_done(). # |
| 2420 |
# For "fmovm.x", call the routine fmovm_dynamic() which will # |
| 2421 |
# decode and emulate the instruction. No FP exceptions can be pending # |
| 2422 |
# as a result of this operation emulation. A Trace exception can be # |
| 2423 |
# pending, though, which means the current stack frame must be changed # |
| 2424 |
# to a Trace stack frame and an exit made through _real_trace(). # |
| 2425 |
# For the case of "fmovm.x Dn,-(a7)", where the offending instruction # |
| 2426 |
# was executed from supervisor mode, this handler must store the FP # |
| 2427 |
# register file values to the system stack by itself since # |
| 2428 |
# fmovm_dynamic() can't handle this. A normal exit is made through # |
| 2429 |
# fpsp_done(). # |
| 2430 |
# For "fmovm.l", fmovm_ctrl() is used to emulate the instruction. # |
| 2431 |
# Again, a Trace exception may be pending and an exit made through # |
| 2432 |
# _real_trace(). Else, a normal exit is made through _fpsp_done(). # |
| 2433 |
# # |
| 2434 |
# Before any of the above is attempted, it must be checked to # |
| 2435 |
# see if the FPU is disabled. Since the "Unimp <ea>" exception is taken # |
| 2436 |
# before the "FPU disabled" exception, but the "FPU disabled" exception # |
| 2437 |
# has higher priority, we check the disabled bit in the PCR. If set, # |
| 2438 |
# then we must create an 8 word "FPU disabled" exception stack frame # |
| 2439 |
# from the current 4 word exception stack frame. This includes # |
| 2440 |
# reproducing the effective address of the instruction to put on the # |
| 2441 |
# new stack frame. # |
| 2442 |
# # |
| 2443 |
# In the process of all emulation work, if a _mem_read() # |
| 2444 |
# "callout" returns a failing result indicating an access error, then # |
| 2445 |
# we must create an access error stack frame from the current stack # |
| 2446 |
# frame. This information includes a faulting address and a fault- # |
| 2447 |
# status-longword. These are created within this handler. # |
| 2448 |
# # |
| 2449 |
######################################################################### |
| 2450 |
|
| 2451 |
global _fpsp_effadd |
| 2452 |
_fpsp_effadd: |
| 2453 |
|
| 2454 |
# This exception type takes priority over the "Line F Emulator" |
| 2455 |
# exception. Therefore, the FPU could be disabled when entering here. |
| 2456 |
# So, we must check to see if it's disabled and handle that case separately. |
| 2457 |
mov.l %d0,-(%sp) # save d0 |
| 2458 |
movc %pcr,%d0 # load proc cr |
| 2459 |
btst &0x1,%d0 # is FPU disabled? |
| 2460 |
bne.w iea_disabled # yes |
| 2461 |
mov.l (%sp)+,%d0 # restore d0 |
| 2462 |
|
| 2463 |
link %a6,&-LOCAL_SIZE # init stack frame |
| 2464 |
|
| 2465 |
movm.l &0x0303,EXC_DREGS(%a6) # save d0-d1/a0-a1 |
| 2466 |
fmovm.l %fpcr,%fpsr,%fpiar,USER_FPCR(%a6) # save ctrl regs |
| 2467 |
fmovm.x &0xc0,EXC_FPREGS(%a6) # save fp0-fp1 on stack |
| 2468 |
|
| 2469 |
# PC of instruction that took the exception is the PC in the frame |
| 2470 |
mov.l EXC_PC(%a6),EXC_EXTWPTR(%a6) |
| 2471 |
|
| 2472 |
mov.l EXC_EXTWPTR(%a6),%a0 # fetch instruction addr |
| 2473 |
addq.l &0x4,EXC_EXTWPTR(%a6) # incr instruction ptr |
| 2474 |
bsr.l _imem_read_long # fetch the instruction words |
| 2475 |
mov.l %d0,EXC_OPWORD(%a6) # store OPWORD and EXTWORD |
| 2476 |
|
| 2477 |
######################################################################### |
| 2478 |
|
| 2479 |
tst.w %d0 # is operation fmovem? |
| 2480 |
bmi.w iea_fmovm # yes |
| 2481 |
|
| 2482 |
# |
| 2483 |
# here, we will have: |
| 2484 |
# fabs fdabs fsabs facos fmod |
| 2485 |
# fadd fdadd fsadd fasin frem |
| 2486 |
# fcmp fatan fscale |
| 2487 |
# fdiv fddiv fsdiv fatanh fsin |
| 2488 |
# fint fcos fsincos |
| 2489 |
# fintrz fcosh fsinh |
| 2490 |
# fmove fdmove fsmove fetox ftan |
| 2491 |
# fmul fdmul fsmul fetoxm1 ftanh |
| 2492 |
# fneg fdneg fsneg fgetexp ftentox |
| 2493 |
# fsgldiv fgetman ftwotox |
| 2494 |
# fsglmul flog10 |
| 2495 |
# fsqrt flog2 |
| 2496 |
# fsub fdsub fssub flogn |
| 2497 |
# ftst flognp1 |
| 2498 |
# which can all use f<op>.{x,p} |
| 2499 |
# so, now it's immediate data extended precision AND PACKED FORMAT! |
| 2500 |
# |
| 2501 |
iea_op: |
| 2502 |
andi.l &0x00ff00ff,USER_FPSR(%a6) |
| 2503 |
|
| 2504 |
btst &0xa,%d0 # is src fmt x or p? |
| 2505 |
bne.b iea_op_pack # packed |
| 2506 |
|
| 2507 |
|
| 2508 |
mov.l EXC_EXTWPTR(%a6),%a0 # pass: ptr to #<data> |
| 2509 |
lea FP_SRC(%a6),%a1 # pass: ptr to super addr |
| 2510 |
mov.l &0xc,%d0 # pass: 12 bytes |
| 2511 |
bsr.l _imem_read # read extended immediate |
| 2512 |
|
| 2513 |
tst.l %d1 # did ifetch fail? |
| 2514 |
bne.w iea_iacc # yes |
| 2515 |
|
| 2516 |
bra.b iea_op_setsrc |
| 2517 |
|
| 2518 |
iea_op_pack: |
| 2519 |
|
| 2520 |
mov.l EXC_EXTWPTR(%a6),%a0 # pass: ptr to #<data> |
| 2521 |
lea FP_SRC(%a6),%a1 # pass: ptr to super dst |
| 2522 |
mov.l &0xc,%d0 # pass: 12 bytes |
| 2523 |
bsr.l _imem_read # read packed operand |
| 2524 |
|
| 2525 |
tst.l %d1 # did ifetch fail? |
| 2526 |
bne.w iea_iacc # yes |
| 2527 |
|
| 2528 |
# The packed operand is an INF or a NAN if the exponent field is all ones. |
| 2529 |
bfextu FP_SRC(%a6){&1:&15},%d0 # get exp |
| 2530 |
cmpi.w %d0,&0x7fff # INF or NAN? |
| 2531 |
beq.b iea_op_setsrc # operand is an INF or NAN |
| 2532 |
|
| 2533 |
# The packed operand is a zero if the mantissa is all zero, else it's |
| 2534 |
# a normal packed op. |
| 2535 |
mov.b 3+FP_SRC(%a6),%d0 # get byte 4 |
| 2536 |
andi.b &0x0f,%d0 # clear all but last nybble |
| 2537 |
bne.b iea_op_gp_not_spec # not a zero |
| 2538 |
tst.l FP_SRC_HI(%a6) # is lw 2 zero? |
| 2539 |
bne.b iea_op_gp_not_spec # not a zero |
| 2540 |
tst.l FP_SRC_LO(%a6) # is lw 3 zero? |
| 2541 |
beq.b iea_op_setsrc # operand is a ZERO |
| 2542 |
iea_op_gp_not_spec: |
| 2543 |
lea FP_SRC(%a6),%a0 # pass: ptr to packed op |
| 2544 |
bsr.l decbin # convert to extended |
| 2545 |
fmovm.x &0x80,FP_SRC(%a6) # make this the srcop |
| 2546 |
|
| 2547 |
iea_op_setsrc: |
| 2548 |
addi.l &0xc,EXC_EXTWPTR(%a6) # update extension word pointer |
| 2549 |
|
| 2550 |
# FP_SRC now holds the src operand. |
| 2551 |
lea FP_SRC(%a6),%a0 # pass: ptr to src op |
| 2552 |
bsr.l set_tag_x # tag the operand type |
| 2553 |
mov.b %d0,STAG(%a6) # could be ANYTHING!!! |
| 2554 |
cmpi.b %d0,&UNNORM # is operand an UNNORM? |
| 2555 |
bne.b iea_op_getdst # no |
| 2556 |
bsr.l unnorm_fix # yes; convert to NORM/DENORM/ZERO |
| 2557 |
mov.b %d0,STAG(%a6) # set new optype tag |
| 2558 |
iea_op_getdst: |
| 2559 |
clr.b STORE_FLG(%a6) # clear "store result" boolean |
| 2560 |
|
| 2561 |
btst &0x5,1+EXC_CMDREG(%a6) # is operation monadic or dyadic? |
| 2562 |
beq.b iea_op_extract # monadic |
| 2563 |
btst &0x4,1+EXC_CMDREG(%a6) # is operation fsincos,ftst,fcmp? |
| 2564 |
bne.b iea_op_spec # yes |
| 2565 |
|
| 2566 |
iea_op_loaddst: |
| 2567 |
bfextu EXC_CMDREG(%a6){&6:&3},%d0 # fetch dst regno |
| 2568 |
bsr.l load_fpn2 # load dst operand |
| 2569 |
|
| 2570 |
lea FP_DST(%a6),%a0 # pass: ptr to dst op |
| 2571 |
bsr.l set_tag_x # tag the operand type |
| 2572 |
mov.b %d0,DTAG(%a6) # could be ANYTHING!!! |
| 2573 |
cmpi.b %d0,&UNNORM # is operand an UNNORM? |
| 2574 |
bne.b iea_op_extract # no |
| 2575 |
bsr.l unnorm_fix # yes; convert to NORM/DENORM/ZERO |
| 2576 |
mov.b %d0,DTAG(%a6) # set new optype tag |
| 2577 |
bra.b iea_op_extract |
| 2578 |
|
| 2579 |
# the operation is fsincos, ftst, or fcmp. only fcmp is dyadic |
| 2580 |
iea_op_spec: |
| 2581 |
btst &0x3,1+EXC_CMDREG(%a6) # is operation fsincos? |
| 2582 |
beq.b iea_op_extract # yes |
| 2583 |
# now, we're left with ftst and fcmp. so, first let's tag them so that they don't |
| 2584 |
# store a result. then, only fcmp will branch back and pick up a dst operand. |
| 2585 |
st STORE_FLG(%a6) # don't store a final result |
| 2586 |
btst &0x1,1+EXC_CMDREG(%a6) # is operation fcmp? |
| 2587 |
beq.b iea_op_loaddst # yes |
| 2588 |
|
| 2589 |
iea_op_extract: |
| 2590 |
clr.l %d0 |
| 2591 |
mov.b FPCR_MODE(%a6),%d0 # pass: rnd mode,prec |
| 2592 |
|
| 2593 |
mov.b 1+EXC_CMDREG(%a6),%d1 |
| 2594 |
andi.w &0x007f,%d1 # extract extension |
| 2595 |
|
| 2596 |
fmov.l &0x0,%fpcr |
| 2597 |
fmov.l &0x0,%fpsr |
| 2598 |
|
| 2599 |
lea FP_SRC(%a6),%a0 |
| 2600 |
lea FP_DST(%a6),%a1 |
| 2601 |
|
| 2602 |
mov.l (tbl_unsupp.l,%pc,%d1.w*4),%d1 # fetch routine addr |
| 2603 |
jsr (tbl_unsupp.l,%pc,%d1.l*1) |
| 2604 |
|
| 2605 |
# |
| 2606 |
# Exceptions in order of precedence: |
| 2607 |
# BSUN : none |
| 2608 |
# SNAN : all operations |
| 2609 |
# OPERR : all reg-reg or mem-reg operations that can normally operr |
| 2610 |
# OVFL : same as OPERR |
| 2611 |
# UNFL : same as OPERR |
| 2612 |
# DZ : same as OPERR |
| 2613 |
# INEX2 : same as OPERR |
| 2614 |
# INEX1 : all packed immediate operations |
| 2615 |
# |
| 2616 |
|
| 2617 |
# we determine the highest priority exception(if any) set by the |
| 2618 |
# emulation routine that has also been enabled by the user. |
| 2619 |
mov.b FPCR_ENABLE(%a6),%d0 # fetch exceptions enabled |
| 2620 |
bne.b iea_op_ena # some are enabled |
| 2621 |
|
| 2622 |
# now, we save the result, unless, of course, the operation was ftst or fcmp. |
| 2623 |
# these don't save results. |
| 2624 |
iea_op_save: |
| 2625 |
tst.b STORE_FLG(%a6) # does this op store a result? |
| 2626 |
bne.b iea_op_exit1 # exit with no frestore |
| 2627 |
|
| 2628 |
iea_op_store: |
| 2629 |
bfextu EXC_CMDREG(%a6){&6:&3},%d0 # fetch dst regno |
| 2630 |
bsr.l store_fpreg # store the result |
| 2631 |
|
| 2632 |
iea_op_exit1: |
| 2633 |
mov.l EXC_PC(%a6),USER_FPIAR(%a6) # set FPIAR to "Current PC" |
| 2634 |
mov.l EXC_EXTWPTR(%a6),EXC_PC(%a6) # set "Next PC" in exc frame |
| 2635 |
|
| 2636 |
fmovm.x EXC_FPREGS(%a6),&0xc0 # restore fp0-fp1 |
| 2637 |
fmovm.l USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs |
| 2638 |
movm.l EXC_DREGS(%a6),&0x0303 # restore d0-d1/a0-a1 |
| 2639 |
|
| 2640 |
unlk %a6 # unravel the frame |
| 2641 |
|
| 2642 |
btst &0x7,(%sp) # is trace on? |
| 2643 |
bne.w iea_op_trace # yes |
| 2644 |
|
| 2645 |
bra.l _fpsp_done # exit to os |
| 2646 |
|
| 2647 |
iea_op_ena: |
| 2648 |
and.b FPSR_EXCEPT(%a6),%d0 # keep only ones enable and set |
| 2649 |
bfffo %d0{&24:&8},%d0 # find highest priority exception |
| 2650 |
bne.b iea_op_exc # at least one was set |
| 2651 |
|
| 2652 |
# no exception occurred. now, did a disabled, exact overflow occur with inexact |
| 2653 |
# enabled? if so, then we have to stuff an overflow frame into the FPU. |
| 2654 |
btst &ovfl_bit,FPSR_EXCEPT(%a6) # did overflow occur? |
| 2655 |
beq.b iea_op_save |
| 2656 |
|
| 2657 |
iea_op_ovfl: |
| 2658 |
btst &inex2_bit,FPCR_ENABLE(%a6) # is inexact enabled? |
| 2659 |
beq.b iea_op_store # no |
| 2660 |
bra.b iea_op_exc_ovfl # yes |
| 2661 |
|
| 2662 |
# an enabled exception occurred. we have to insert the exception type back into |
| 2663 |
# the machine. |
| 2664 |
iea_op_exc: |
| 2665 |
subi.l &24,%d0 # fix offset to be 0-8 |
| 2666 |
cmpi.b %d0,&0x6 # is exception INEX? |
| 2667 |
bne.b iea_op_exc_force # no |
| 2668 |
|
| 2669 |
# the enabled exception was inexact. so, if it occurs with an overflow |
| 2670 |
# or underflow that was disabled, then we have to force an overflow or |
| 2671 |
# underflow frame. |
| 2672 |
btst &ovfl_bit,FPSR_EXCEPT(%a6) # did overflow occur? |
| 2673 |
bne.b iea_op_exc_ovfl # yes |
| 2674 |
btst &unfl_bit,FPSR_EXCEPT(%a6) # did underflow occur? |
| 2675 |
bne.b iea_op_exc_unfl # yes |
| 2676 |
|
| 2677 |
iea_op_exc_force: |
| 2678 |
mov.w (tbl_iea_except.b,%pc,%d0.w*2),2+FP_SRC(%a6) |
| 2679 |
bra.b iea_op_exit2 # exit with frestore |
| 2680 |
|
| 2681 |
tbl_iea_except: |
| 2682 |
short 0xe002, 0xe006, 0xe004, 0xe005 |
| 2683 |
short 0xe003, 0xe002, 0xe001, 0xe001 |
| 2684 |
|
| 2685 |
iea_op_exc_ovfl: |
| 2686 |
mov.w &0xe005,2+FP_SRC(%a6) |
| 2687 |
bra.b iea_op_exit2 |
| 2688 |
|
| 2689 |
iea_op_exc_unfl: |
| 2690 |
mov.w &0xe003,2+FP_SRC(%a6) |
| 2691 |
|
| 2692 |
iea_op_exit2: |
| 2693 |
mov.l EXC_PC(%a6),USER_FPIAR(%a6) # set FPIAR to "Current PC" |
| 2694 |
mov.l EXC_EXTWPTR(%a6),EXC_PC(%a6) # set "Next PC" in exc frame |
| 2695 |
|
| 2696 |
fmovm.x EXC_FPREGS(%a6),&0xc0 # restore fp0-fp1 |
| 2697 |
fmovm.l USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs |
| 2698 |
movm.l EXC_DREGS(%a6),&0x0303 # restore d0-d1/a0-a1 |
| 2699 |
|
| 2700 |
frestore FP_SRC(%a6) # restore exceptional state |
| 2701 |
|
| 2702 |
unlk %a6 # unravel the frame |
| 2703 |
|
| 2704 |
btst &0x7,(%sp) # is trace on? |
| 2705 |
bne.b iea_op_trace # yes |
| 2706 |
|
| 2707 |
bra.l _fpsp_done # exit to os |
| 2708 |
|
| 2709 |
# |
| 2710 |
# The opclass two instruction that took an "Unimplemented Effective Address" |
| 2711 |
# exception was being traced. Make the "current" PC the FPIAR and put it in |
| 2712 |
# the trace stack frame then jump to _real_trace(). |
| 2713 |
# |
| 2714 |
# UNIMP EA FRAME TRACE FRAME |
| 2715 |
# ***************** ***************** |
| 2716 |
# * 0x0 * 0x0f0 * * Current * |
| 2717 |
# ***************** * PC * |
| 2718 |
# * Current * ***************** |
| 2719 |
# * PC * * 0x2 * 0x024 * |
| 2720 |
# ***************** ***************** |
| 2721 |
# * SR * * Next * |
| 2722 |
# ***************** * PC * |
| 2723 |
# ***************** |
| 2724 |
# * SR * |
| 2725 |
# ***************** |
| 2726 |
iea_op_trace: |
| 2727 |
mov.l (%sp),-(%sp) # shift stack frame "down" |
| 2728 |
mov.w 0x8(%sp),0x4(%sp) |
| 2729 |
mov.w &0x2024,0x6(%sp) # stk fmt = 0x2; voff = 0x024 |
| 2730 |
fmov.l %fpiar,0x8(%sp) # "Current PC" is in FPIAR |
| 2731 |
|
| 2732 |
bra.l _real_trace |
| 2733 |
|
| 2734 |
######################################################################### |
| 2735 |
iea_fmovm: |
| 2736 |
btst &14,%d0 # ctrl or data reg |
| 2737 |
beq.w iea_fmovm_ctrl |
| 2738 |
|
| 2739 |
iea_fmovm_data: |
| 2740 |
|
| 2741 |
btst &0x5,EXC_SR(%a6) # user or supervisor mode |
| 2742 |
bne.b iea_fmovm_data_s |
| 2743 |
|
| 2744 |
iea_fmovm_data_u: |
| 2745 |
mov.l %usp,%a0 |
| 2746 |
mov.l %a0,EXC_A7(%a6) # store current a7 |
| 2747 |
bsr.l fmovm_dynamic # do dynamic fmovm |
| 2748 |
mov.l EXC_A7(%a6),%a0 # load possibly new a7 |
| 2749 |
mov.l %a0,%usp # update usp |
| 2750 |
bra.w iea_fmovm_exit |
| 2751 |
|
| 2752 |
iea_fmovm_data_s: |
| 2753 |
clr.b SPCOND_FLG(%a6) |
| 2754 |
lea 0x2+EXC_VOFF(%a6),%a0 |
| 2755 |
mov.l %a0,EXC_A7(%a6) |
| 2756 |
bsr.l fmovm_dynamic # do dynamic fmovm |
| 2757 |
|
| 2758 |
cmpi.b SPCOND_FLG(%a6),&mda7_flg |
| 2759 |
beq.w iea_fmovm_data_predec |
| 2760 |
cmpi.b SPCOND_FLG(%a6),&mia7_flg |
| 2761 |
bne.w iea_fmovm_exit |
| 2762 |
|
| 2763 |
# right now, d0 = the size. |
| 2764 |
# the data has been fetched from the supervisor stack, but we have not |
| 2765 |
# incremented the stack pointer by the appropriate number of bytes. |
| 2766 |
# do it here. |
| 2767 |
iea_fmovm_data_postinc: |
| 2768 |
btst &0x7,EXC_SR(%a6) |
| 2769 |
bne.b iea_fmovm_data_pi_trace |
| 2770 |
|
| 2771 |
mov.w EXC_SR(%a6),(EXC_SR,%a6,%d0) |
| 2772 |
mov.l EXC_EXTWPTR(%a6),(EXC_PC,%a6,%d0) |
| 2773 |
mov.w &0x00f0,(EXC_VOFF,%a6,%d0) |
| 2774 |
|
| 2775 |
lea (EXC_SR,%a6,%d0),%a0 |
| 2776 |
mov.l %a0,EXC_SR(%a6) |
| 2777 |
|
| 2778 |
fmovm.x EXC_FP0(%a6),&0xc0 # restore fp0-fp1 |
| 2779 |
fmovm.l USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs |
| 2780 |
movm.l EXC_DREGS(%a6),&0x0303 # restore d0-d1/a0-a1 |
| 2781 |
|
| 2782 |
unlk %a6 |
| 2783 |
mov.l (%sp)+,%sp |
| 2784 |
bra.l _fpsp_done |
| 2785 |
|
| 2786 |
iea_fmovm_data_pi_trace: |
| 2787 |
mov.w EXC_SR(%a6),(EXC_SR-0x4,%a6,%d0) |
| 2788 |
mov.l EXC_EXTWPTR(%a6),(EXC_PC-0x4,%a6,%d0) |
| 2789 |
mov.w &0x2024,(EXC_VOFF-0x4,%a6,%d0) |
| 2790 |
mov.l EXC_PC(%a6),(EXC_VOFF+0x2-0x4,%a6,%d0) |
| 2791 |
|
| 2792 |
lea (EXC_SR-0x4,%a6,%d0),%a0 |
| 2793 |
mov.l %a0,EXC_SR(%a6) |
| 2794 |
|
| 2795 |
fmovm.x EXC_FP0(%a6),&0xc0 # restore fp0-fp1 |
| 2796 |
fmovm.l USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs |
| 2797 |
movm.l EXC_DREGS(%a6),&0x0303 # restore d0-d1/a0-a1 |
| 2798 |
|
| 2799 |
unlk %a6 |
| 2800 |
mov.l (%sp)+,%sp |
| 2801 |
bra.l _real_trace |
| 2802 |
|
| 2803 |
# right now, d1 = size and d0 = the strg. |
| 2804 |
iea_fmovm_data_predec: |
| 2805 |
mov.b %d1,EXC_VOFF(%a6) # store strg |
| 2806 |
mov.b %d0,0x1+EXC_VOFF(%a6) # store size |
| 2807 |
|
| 2808 |
fmovm.x EXC_FP0(%a6),&0xc0 # restore fp0-fp1 |
| 2809 |
fmovm.l USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs |
| 2810 |
movm.l EXC_DREGS(%a6),&0x0303 # restore d0-d1/a0-a1 |
| 2811 |
|
| 2812 |
mov.l (%a6),-(%sp) # make a copy of a6 |
| 2813 |
mov.l %d0,-(%sp) # save d0 |
| 2814 |
mov.l %d1,-(%sp) # save d1 |
| 2815 |
mov.l EXC_EXTWPTR(%a6),-(%sp) # make a copy of Next PC |
| 2816 |
|
| 2817 |
clr.l %d0 |
| 2818 |
mov.b 0x1+EXC_VOFF(%a6),%d0 # fetch size |
| 2819 |
neg.l %d0 # get negative of size |
| 2820 |
|
| 2821 |
btst &0x7,EXC_SR(%a6) # is trace enabled? |
| 2822 |
beq.b iea_fmovm_data_p2 |
| 2823 |
|
| 2824 |
mov.w EXC_SR(%a6),(EXC_SR-0x4,%a6,%d0) |
| 2825 |
mov.l EXC_PC(%a6),(EXC_VOFF-0x2,%a6,%d0) |
| 2826 |
mov.l (%sp)+,(EXC_PC-0x4,%a6,%d0) |
| 2827 |
mov.w &0x2024,(EXC_VOFF-0x4,%a6,%d0) |
| 2828 |
|
| 2829 |
pea (%a6,%d0) # create final sp |
| 2830 |
bra.b iea_fmovm_data_p3 |
| 2831 |
|
| 2832 |
iea_fmovm_data_p2: |
| 2833 |
mov.w EXC_SR(%a6),(EXC_SR,%a6,%d0) |
| 2834 |
mov.l (%sp)+,(EXC_PC,%a6,%d0) |
| 2835 |
mov.w &0x00f0,(EXC_VOFF,%a6,%d0) |
| 2836 |
|
| 2837 |
pea (0x4,%a6,%d0) # create final sp |
| 2838 |
|
| 2839 |
iea_fmovm_data_p3: |
| 2840 |
clr.l %d1 |
| 2841 |
mov.b EXC_VOFF(%a6),%d1 # fetch strg |
| 2842 |
|
| 2843 |
tst.b %d1 |
| 2844 |
bpl.b fm_1 |
| 2845 |
fmovm.x &0x80,(0x4+0x8,%a6,%d0) |
| 2846 |
addi.l &0xc,%d0 |
| 2847 |
fm_1: |
| 2848 |
lsl.b &0x1,%d1 |
| 2849 |
bpl.b fm_2 |
| 2850 |
fmovm.x &0x40,(0x4+0x8,%a6,%d0) |
| 2851 |
addi.l &0xc,%d0 |
| 2852 |
fm_2: |
| 2853 |
lsl.b &0x1,%d1 |
| 2854 |
bpl.b fm_3 |
| 2855 |
fmovm.x &0x20,(0x4+0x8,%a6,%d0) |
| 2856 |
addi.l &0xc,%d0 |
| 2857 |
fm_3: |
| 2858 |
lsl.b &0x1,%d1 |
| 2859 |
bpl.b fm_4 |
| 2860 |
fmovm.x &0x10,(0x4+0x8,%a6,%d0) |
| 2861 |
addi.l &0xc,%d0 |
| 2862 |
fm_4: |
| 2863 |
lsl.b &0x1,%d1 |
| 2864 |
bpl.b fm_5 |
| 2865 |
fmovm.x &0x08,(0x4+0x8,%a6,%d0) |
| 2866 |
addi.l &0xc,%d0 |
| 2867 |
fm_5: |
| 2868 |
lsl.b &0x1,%d1 |
| 2869 |
bpl.b fm_6 |
| 2870 |
fmovm.x &0x04,(0x4+0x8,%a6,%d0) |
| 2871 |
addi.l &0xc,%d0 |
| 2872 |
fm_6: |
| 2873 |
lsl.b &0x1,%d1 |
| 2874 |
bpl.b fm_7 |
| 2875 |
fmovm.x &0x02,(0x4+0x8,%a6,%d0) |
| 2876 |
addi.l &0xc,%d0 |
| 2877 |
fm_7: |
| 2878 |
lsl.b &0x1,%d1 |
| 2879 |
bpl.b fm_end |
| 2880 |
fmovm.x &0x01,(0x4+0x8,%a6,%d0) |
| 2881 |
fm_end: |
| 2882 |
mov.l 0x4(%sp),%d1 |
| 2883 |
mov.l 0x8(%sp),%d0 |
| 2884 |
mov.l 0xc(%sp),%a6 |
| 2885 |
mov.l (%sp)+,%sp |
| 2886 |
|
| 2887 |
btst &0x7,(%sp) # is trace enabled? |
| 2888 |
beq.l _fpsp_done |
| 2889 |
bra.l _real_trace |
| 2890 |
|
| 2891 |
######################################################################### |
| 2892 |
iea_fmovm_ctrl: |
| 2893 |
|
| 2894 |
bsr.l fmovm_ctrl # load ctrl regs |
| 2895 |
|
| 2896 |
iea_fmovm_exit: |
| 2897 |
fmovm.x EXC_FPREGS(%a6),&0xc0 # restore fp0-fp1 |
| 2898 |
fmovm.l USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs |
| 2899 |
movm.l EXC_DREGS(%a6),&0x0303 # restore d0-d1/a0-a1 |
| 2900 |
|
| 2901 |
btst &0x7,EXC_SR(%a6) # is trace on? |
| 2902 |
bne.b iea_fmovm_trace # yes |
| 2903 |
|
| 2904 |
mov.l EXC_EXTWPTR(%a6),EXC_PC(%a6) # set Next PC |
| 2905 |
|
| 2906 |
unlk %a6 # unravel the frame |
| 2907 |
|
| 2908 |
bra.l _fpsp_done # exit to os |
| 2909 |
|
| 2910 |
# |
| 2911 |
# The control reg instruction that took an "Unimplemented Effective Address" |
| 2912 |
# exception was being traced. The "Current PC" for the trace frame is the |
| 2913 |
# PC stacked for Unimp EA. The "Next PC" is in EXC_EXTWPTR. |
| 2914 |
# After fixing the stack frame, jump to _real_trace(). |
| 2915 |
# |
| 2916 |
# UNIMP EA FRAME TRACE FRAME |
| 2917 |
# ***************** ***************** |
| 2918 |
# * 0x0 * 0x0f0 * * Current * |
| 2919 |
# ***************** * PC * |
| 2920 |
# * Current * ***************** |
| 2921 |
# * PC * * 0x2 * 0x024 * |
| 2922 |
# ***************** ***************** |
| 2923 |
# * SR * * Next * |
| 2924 |
# ***************** * PC * |
| 2925 |
# ***************** |
| 2926 |
# * SR * |
| 2927 |
# ***************** |
| 2928 |
# this ain't a pretty solution, but it works: |
| 2929 |
# -restore a6 (not with unlk) |
| 2930 |
# -shift stack frame down over where old a6 used to be |
| 2931 |
# -add LOCAL_SIZE to stack pointer |
| 2932 |
iea_fmovm_trace: |
| 2933 |
mov.l (%a6),%a6 # restore frame pointer |
| 2934 |
mov.w EXC_SR+LOCAL_SIZE(%sp),0x0+LOCAL_SIZE(%sp) |
| 2935 |
mov.l EXC_PC+LOCAL_SIZE(%sp),0x8+LOCAL_SIZE(%sp) |
| 2936 |
mov.l EXC_EXTWPTR+LOCAL_SIZE(%sp),0x2+LOCAL_SIZE(%sp) |
| 2937 |
mov.w &0x2024,0x6+LOCAL_SIZE(%sp) # stk fmt = 0x2; voff = 0x024 |
| 2938 |
add.l &LOCAL_SIZE,%sp # clear stack frame |
| 2939 |
|
| 2940 |
bra.l _real_trace |
| 2941 |
|
| 2942 |
######################################################################### |
| 2943 |
# The FPU is disabled and so we should really have taken the "Line |
| 2944 |
# F Emulator" exception. So, here we create an 8-word stack frame |
| 2945 |
# from our 4-word stack frame. This means we must calculate the length |
| 2946 |
# the faulting instruction to get the "next PC". This is trivial for |
| 2947 |
# immediate operands but requires some extra work for fmovm dynamic |
| 2948 |
# which can use most addressing modes. |
| 2949 |
iea_disabled: |
| 2950 |
mov.l (%sp)+,%d0 # restore d0 |
| 2951 |
|
| 2952 |
link %a6,&-LOCAL_SIZE # init stack frame |
| 2953 |
|
| 2954 |
movm.l &0x0303,EXC_DREGS(%a6) # save d0-d1/a0-a1 |
| 2955 |
|
| 2956 |
# PC of instruction that took the exception is the PC in the frame |
| 2957 |
mov.l EXC_PC(%a6),EXC_EXTWPTR(%a6) |
| 2958 |
mov.l EXC_EXTWPTR(%a6),%a0 # fetch instruction addr |
| 2959 |
addq.l &0x4,EXC_EXTWPTR(%a6) # incr instruction ptr |
| 2960 |
bsr.l _imem_read_long # fetch the instruction words |
| 2961 |
mov.l %d0,EXC_OPWORD(%a6) # store OPWORD and EXTWORD |
| 2962 |
|
| 2963 |
tst.w %d0 # is instr fmovm? |
| 2964 |
bmi.b iea_dis_fmovm # yes |
| 2965 |
# instruction is using an extended precision immediate operand. Therefore, |
| 2966 |
# the total instruction length is 16 bytes. |
| 2967 |
iea_dis_immed: |
| 2968 |
mov.l &0x10,%d0 # 16 bytes of instruction |
| 2969 |
bra.b iea_dis_cont |
| 2970 |
iea_dis_fmovm: |
| 2971 |
btst &0xe,%d0 # is instr fmovm ctrl |
| 2972 |
bne.b iea_dis_fmovm_data # no |
| 2973 |
# the instruction is a fmovm.l with 2 or 3 registers. |
| 2974 |
bfextu %d0{&19:&3},%d1 |
| 2975 |
mov.l &0xc,%d0 |
| 2976 |
cmpi.b %d1,&0x7 # move all regs? |
| 2977 |
bne.b iea_dis_cont |
| 2978 |
addq.l &0x4,%d0 |
| 2979 |
bra.b iea_dis_cont |
| 2980 |
# the instruction is an fmovm.x dynamic which can use many addressing |
| 2981 |
# modes and thus can have several different total instruction lengths. |
| 2982 |
# call fmovm_calc_ea which will go through the ea calc process and, |
| 2983 |
# as a by-product, will tell us how long the instruction is. |
| 2984 |
iea_dis_fmovm_data: |
| 2985 |
clr.l %d0 |
| 2986 |
bsr.l fmovm_calc_ea |
| 2987 |
mov.l EXC_EXTWPTR(%a6),%d0 |
| 2988 |
sub.l EXC_PC(%a6),%d0 |
| 2989 |
iea_dis_cont: |
| 2990 |
mov.w %d0,EXC_VOFF(%a6) # store stack shift value |
| 2991 |
|
| 2992 |
movm.l EXC_DREGS(%a6),&0x0303 # restore d0-d1/a0-a1 |
| 2993 |
|
| 2994 |
unlk %a6 |
| 2995 |
|
| 2996 |
# here, we actually create the 8-word frame from the 4-word frame, |
| 2997 |
# with the "next PC" as additional info. |
| 2998 |
# the <ea> field is let as undefined. |
| 2999 |
subq.l &0x8,%sp # make room for new stack |
| 3000 |
mov.l %d0,-(%sp) # save d0 |
| 3001 |
mov.w 0xc(%sp),0x4(%sp) # move SR |
| 3002 |
mov.l 0xe(%sp),0x6(%sp) # move Current PC |
| 3003 |
clr.l %d0 |
| 3004 |
mov.w 0x12(%sp),%d0 |
| 3005 |
mov.l 0x6(%sp),0x10(%sp) # move Current PC |
| 3006 |
add.l %d0,0x6(%sp) # make Next PC |
| 3007 |
mov.w &0x402c,0xa(%sp) # insert offset,frame format |
| 3008 |
mov.l (%sp)+,%d0 # restore d0 |
| 3009 |
|
| 3010 |
bra.l _real_fpu_disabled |
| 3011 |
|
| 3012 |
########## |
| 3013 |
|
| 3014 |
iea_iacc: |
| 3015 |
movc %pcr,%d0 |
| 3016 |
btst &0x1,%d0 |
| 3017 |
bne.b iea_iacc_cont |
| 3018 |
fmovm.l USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs |
| 3019 |
fmovm.x EXC_FPREGS(%a6),&0xc0 # restore fp0-fp1 on stack |
| 3020 |
iea_iacc_cont: |
| 3021 |
movm.l EXC_DREGS(%a6),&0x0303 # restore d0-d1/a0-a1 |
| 3022 |
|
| 3023 |
unlk %a6 |
| 3024 |
|
| 3025 |
subq.w &0x8,%sp # make stack frame bigger |
| 3026 |
mov.l 0x8(%sp),(%sp) # store SR,hi(PC) |
| 3027 |
mov.w 0xc(%sp),0x4(%sp) # store lo(PC) |
| 3028 |
mov.w &0x4008,0x6(%sp) # store voff |
| 3029 |
mov.l 0x2(%sp),0x8(%sp) # store ea |
| 3030 |
mov.l &0x09428001,0xc(%sp) # store fslw |
| 3031 |
|
| 3032 |
iea_acc_done: |
| 3033 |
btst &0x5,(%sp) # user or supervisor mode? |
| 3034 |
beq.b iea_acc_done2 # user |
| 3035 |
bset &0x2,0xd(%sp) # set supervisor TM bit |
| 3036 |
|
| 3037 |
iea_acc_done2: |
| 3038 |
bra.l _real_access |
| 3039 |
|
| 3040 |
iea_dacc: |
| 3041 |
lea -LOCAL_SIZE(%a6),%sp |
| 3042 |
|
| 3043 |
movc %pcr,%d1 |
| 3044 |
btst &0x1,%d1 |
| 3045 |
bne.b iea_dacc_cont |
| 3046 |
fmovm.x EXC_FPREGS(%a6),&0xc0 # restore fp0-fp1 on stack |
| 3047 |
fmovm.l LOCAL_SIZE+USER_FPCR(%sp),%fpcr,%fpsr,%fpiar # restore ctrl regs |
| 3048 |
iea_dacc_cont: |
| 3049 |
mov.l (%a6),%a6 |
| 3050 |
|
| 3051 |
mov.l 0x4+LOCAL_SIZE(%sp),-0x8+0x4+LOCAL_SIZE(%sp) |
| 3052 |
mov.w 0x8+LOCAL_SIZE(%sp),-0x8+0x8+LOCAL_SIZE(%sp) |
| 3053 |
mov.w &0x4008,-0x8+0xa+LOCAL_SIZE(%sp) |
| 3054 |
mov.l %a0,-0x8+0xc+LOCAL_SIZE(%sp) |
| 3055 |
mov.w %d0,-0x8+0x10+LOCAL_SIZE(%sp) |
| 3056 |
mov.w &0x0001,-0x8+0x12+LOCAL_SIZE(%sp) |
| 3057 |
|
| 3058 |
movm.l LOCAL_SIZE+EXC_DREGS(%sp),&0x0303 # restore d0-d1/a0-a1 |
| 3059 |
add.w &LOCAL_SIZE-0x4,%sp |
| 3060 |
|
| 3061 |
bra.b iea_acc_done |
| 3062 |
|
| 3063 |
######################################################################### |
| 3064 |
# XDEF **************************************************************** # |
| 3065 |
# _fpsp_operr(): 060FPSP entry point for FP Operr exception. # |
| 3066 |
# # |
| 3067 |
# This handler should be the first code executed upon taking the # |
| 3068 |
# FP Operand Error exception in an operating system. # |
| 3069 |
# # |
| 3070 |
# XREF **************************************************************** # |
| 3071 |
# _imem_read_long() - read instruction longword # |
| 3072 |
# fix_skewed_ops() - adjust src operand in fsave frame # |
| 3073 |
# _real_operr() - "callout" to operating system operr handler # |
| 3074 |
# _dmem_write_{byte,word,long}() - store data to mem (opclass 3) # |
| 3075 |
# store_dreg_{b,w,l}() - store data to data regfile (opclass 3) # |
| 3076 |
# facc_out_{b,w,l}() - store to memory took access error (opcl 3) # |
| 3077 |
# # |
| 3078 |
# INPUT *************************************************************** # |
| 3079 |
# - The system stack contains the FP Operr exception frame # |
| 3080 |
# - The fsave frame contains the source operand # |
| 3081 |
# # |
| 3082 |
# OUTPUT ************************************************************** # |
| 3083 |
# No access error: # |
| 3084 |
# - The system stack is unchanged # |
| 3085 |
# - The fsave frame contains the adjusted src op for opclass 0,2 # |
| 3086 |
# # |
| 3087 |
# ALGORITHM *********************************************************** # |
| 3088 |
# In a system where the FP Operr exception is enabled, the goal # |
| 3089 |
# is to get to the handler specified at _real_operr(). But, on the 060, # |
| 3090 |
# for opclass zero and two instruction taking this exception, the # |
| 3091 |
# input operand in the fsave frame may be incorrect for some cases # |
| 3092 |
# and needs to be corrected. This handler calls fix_skewed_ops() to # |
| 3093 |
# do just this and then exits through _real_operr(). # |
| 3094 |
# For opclass 3 instructions, the 060 doesn't store the default # |
| 3095 |
# operr result out to memory or data register file as it should. # |
| 3096 |
# This code must emulate the move out before finally exiting through # |
| 3097 |
# _real_inex(). The move out, if to memory, is performed using # |
| 3098 |
# _mem_write() "callout" routines that may return a failing result. # |
| 3099 |
# In this special case, the handler must exit through facc_out() # |
| 3100 |
# which creates an access error stack frame from the current operr # |
| 3101 |
# stack frame. # |
| 3102 |
# # |
| 3103 |
######################################################################### |
| 3104 |
|
| 3105 |
global _fpsp_operr |
| 3106 |
_fpsp_operr: |
| 3107 |
|
| 3108 |
link.w %a6,&-LOCAL_SIZE # init stack frame |
| 3109 |
|
| 3110 |
fsave FP_SRC(%a6) # grab the "busy" frame |
| 3111 |
|
| 3112 |
movm.l &0x0303,EXC_DREGS(%a6) # save d0-d1/a0-a1 |
| 3113 |
fmovm.l %fpcr,%fpsr,%fpiar,USER_FPCR(%a6) # save ctrl regs |
| 3114 |
fmovm.x &0xc0,EXC_FPREGS(%a6) # save fp0-fp1 on stack |
| 3115 |
|
| 3116 |
# the FPIAR holds the "current PC" of the faulting instruction |
| 3117 |
mov.l USER_FPIAR(%a6),EXC_EXTWPTR(%a6) |
| 3118 |
|
| 3119 |
mov.l EXC_EXTWPTR(%a6),%a0 # fetch instruction addr |
| 3120 |
addq.l &0x4,EXC_EXTWPTR(%a6) # incr instruction ptr |
| 3121 |
bsr.l _imem_read_long # fetch the instruction words |
| 3122 |
mov.l %d0,EXC_OPWORD(%a6) |
| 3123 |
|
| 3124 |
############################################################################## |
| 3125 |
|
| 3126 |
btst &13,%d0 # is instr an fmove out? |
| 3127 |
bne.b foperr_out # fmove out |
| 3128 |
|
| 3129 |
|
| 3130 |
# here, we simply see if the operand in the fsave frame needs to be "unskewed". |
| 3131 |
# this would be the case for opclass two operations with a source infinity or |
| 3132 |
# denorm operand in the sgl or dbl format. NANs also become skewed, but can't |
| 3133 |
# cause an operr so we don't need to check for them here. |
| 3134 |
lea FP_SRC(%a6),%a0 # pass: ptr to src op |
| 3135 |
bsr.l fix_skewed_ops # fix src op |
| 3136 |
|
| 3137 |
foperr_exit: |
| 3138 |
fmovm.x EXC_FPREGS(%a6),&0xc0 # restore fp0-fp1 |
| 3139 |
fmovm.l USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs |
| 3140 |
movm.l EXC_DREGS(%a6),&0x0303 # restore d0-d1/a0-a1 |
| 3141 |
|
| 3142 |
frestore FP_SRC(%a6) |
| 3143 |
|
| 3144 |
unlk %a6 |
| 3145 |
bra.l _real_operr |
| 3146 |
|
| 3147 |
######################################################################## |
| 3148 |
|
| 3149 |
# |
| 3150 |
# the hardware does not save the default result to memory on enabled |
| 3151 |
# operand error exceptions. we do this here before passing control to |
| 3152 |
# the user operand error handler. |
| 3153 |
# |
| 3154 |
# byte, word, and long destination format operations can pass |
| 3155 |
# through here. we simply need to test the sign of the src |
| 3156 |
# operand and save the appropriate minimum or maximum integer value |
| 3157 |
# to the effective address as pointed to by the stacked effective address. |
| 3158 |
# |
| 3159 |
# although packed opclass three operations can take operand error |
| 3160 |
# exceptions, they won't pass through here since they are caught |
| 3161 |
# first by the unsupported data format exception handler. that handler |
| 3162 |
# sends them directly to _real_operr() if necessary. |
| 3163 |
# |
| 3164 |
foperr_out: |
| 3165 |
|
| 3166 |
mov.w FP_SRC_EX(%a6),%d1 # fetch exponent |
| 3167 |
andi.w &0x7fff,%d1 |
| 3168 |
cmpi.w %d1,&0x7fff |
| 3169 |
bne.b foperr_out_not_qnan |
| 3170 |
# the operand is either an infinity or a QNAN. |
| 3171 |
tst.l FP_SRC_LO(%a6) |
| 3172 |
bne.b foperr_out_qnan |
| 3173 |
mov.l FP_SRC_HI(%a6),%d1 |
| 3174 |
andi.l &0x7fffffff,%d1 |
| 3175 |
beq.b foperr_out_not_qnan |
| 3176 |
foperr_out_qnan: |
| 3177 |
mov.l FP_SRC_HI(%a6),L_SCR1(%a6) |
| 3178 |
bra.b foperr_out_jmp |
| 3179 |
|
| 3180 |
foperr_out_not_qnan: |
| 3181 |
mov.l &0x7fffffff,%d1 |
| 3182 |
tst.b FP_SRC_EX(%a6) |
| 3183 |
bpl.b foperr_out_not_qnan2 |
| 3184 |
addq.l &0x1,%d1 |
| 3185 |
foperr_out_not_qnan2: |
| 3186 |
mov.l %d1,L_SCR1(%a6) |
| 3187 |
|
| 3188 |
foperr_out_jmp: |
| 3189 |
bfextu %d0{&19:&3},%d0 # extract dst format field |
| 3190 |
mov.b 1+EXC_OPWORD(%a6),%d1 # extract <ea> mode,reg |
| 3191 |
mov.w (tbl_operr.b,%pc,%d0.w*2),%a0 |
| 3192 |
jmp (tbl_operr.b,%pc,%a0) |
| 3193 |
|
| 3194 |
tbl_operr: |
| 3195 |
short foperr_out_l - tbl_operr # long word integer |
| 3196 |
short tbl_operr - tbl_operr # sgl prec shouldn't happen |
| 3197 |
short tbl_operr - tbl_operr # ext prec shouldn't happen |
| 3198 |
short foperr_exit - tbl_operr # packed won't enter here |
| 3199 |
short foperr_out_w - tbl_operr # word integer |
| 3200 |
short tbl_operr - tbl_operr # dbl prec shouldn't happen |
| 3201 |
short foperr_out_b - tbl_operr # byte integer |
| 3202 |
short tbl_operr - tbl_operr # packed won't enter here |
| 3203 |
|
| 3204 |
foperr_out_b: |
| 3205 |
mov.b L_SCR1(%a6),%d0 # load positive default result |
| 3206 |
cmpi.b %d1,&0x7 # is <ea> mode a data reg? |
| 3207 |
ble.b foperr_out_b_save_dn # yes |
| 3208 |
mov.l EXC_EA(%a6),%a0 # pass: <ea> of default result |
| 3209 |
bsr.l _dmem_write_byte # write the default result |
| 3210 |
|
| 3211 |
tst.l %d1 # did dstore fail? |
| 3212 |
bne.l facc_out_b # yes |
| 3213 |
|
| 3214 |
bra.w foperr_exit |
| 3215 |
foperr_out_b_save_dn: |
| 3216 |
andi.w &0x0007,%d1 |
| 3217 |
bsr.l store_dreg_b # store result to regfile |
| 3218 |
bra.w foperr_exit |
| 3219 |
|
| 3220 |
foperr_out_w: |
| 3221 |
mov.w L_SCR1(%a6),%d0 # load positive default result |
| 3222 |
cmpi.b %d1,&0x7 # is <ea> mode a data reg? |
| 3223 |
ble.b foperr_out_w_save_dn # yes |
| 3224 |
mov.l EXC_EA(%a6),%a0 # pass: <ea> of default result |
| 3225 |
bsr.l _dmem_write_word # write the default result |
| 3226 |
|
| 3227 |
tst.l %d1 # did dstore fail? |
| 3228 |
bne.l facc_out_w # yes |
| 3229 |
|
| 3230 |
bra.w foperr_exit |
| 3231 |
foperr_out_w_save_dn: |
| 3232 |
andi.w &0x0007,%d1 |
| 3233 |
bsr.l store_dreg_w # store result to regfile |
| 3234 |
bra.w foperr_exit |
| 3235 |
|
| 3236 |
foperr_out_l: |
| 3237 |
mov.l L_SCR1(%a6),%d0 # load positive default result |
| 3238 |
cmpi.b %d1,&0x7 # is <ea> mode a data reg? |
| 3239 |
ble.b foperr_out_l_save_dn # yes |
| 3240 |
mov.l EXC_EA(%a6),%a0 # pass: <ea> of default result |
| 3241 |
bsr.l _dmem_write_long # write the default result |
| 3242 |
|
| 3243 |
tst.l %d1 # did dstore fail? |
| 3244 |
bne.l facc_out_l # yes |
| 3245 |
|
| 3246 |
bra.w foperr_exit |
| 3247 |
foperr_out_l_save_dn: |
| 3248 |
andi.w &0x0007,%d1 |
| 3249 |
bsr.l store_dreg_l # store result to regfile |
| 3250 |
bra.w foperr_exit |
| 3251 |
|
| 3252 |
######################################################################### |
| 3253 |
# XDEF **************************************************************** # |
| 3254 |
# _fpsp_snan(): 060FPSP entry point for FP SNAN exception. # |
| 3255 |
# # |
| 3256 |
# This handler should be the first code executed upon taking the # |
| 3257 |
# FP Signalling NAN exception in an operating system. # |
| 3258 |
# # |
| 3259 |
# XREF **************************************************************** # |
| 3260 |
# _imem_read_long() - read instruction longword # |
| 3261 |
# fix_skewed_ops() - adjust src operand in fsave frame # |
| 3262 |
# _real_snan() - "callout" to operating system SNAN handler # |
| 3263 |
# _dmem_write_{byte,word,long}() - store data to mem (opclass 3) # |
| 3264 |
# store_dreg_{b,w,l}() - store data to data regfile (opclass 3) # |
| 3265 |
# facc_out_{b,w,l,d,x}() - store to mem took acc error (opcl 3) # |
| 3266 |
# _calc_ea_fout() - fix An if <ea> is -() or ()+; also get <ea> # |
| 3267 |
# # |
| 3268 |
# INPUT *************************************************************** # |
| 3269 |
# - The system stack contains the FP SNAN exception frame # |
| 3270 |
# - The fsave frame contains the source operand # |
| 3271 |
# # |
| 3272 |
# OUTPUT ************************************************************** # |
| 3273 |
# No access error: # |
| 3274 |
# - The system stack is unchanged # |
| 3275 |
# - The fsave frame contains the adjusted src op for opclass 0,2 # |
| 3276 |
# # |
| 3277 |
# ALGORITHM *********************************************************** # |
| 3278 |
# In a system where the FP SNAN exception is enabled, the goal # |
| 3279 |
# is to get to the handler specified at _real_snan(). But, on the 060, # |
| 3280 |
# for opclass zero and two instructions taking this exception, the # |
| 3281 |
# input operand in the fsave frame may be incorrect for some cases # |
| 3282 |
# and needs to be corrected. This handler calls fix_skewed_ops() to # |
| 3283 |
# do just this and then exits through _real_snan(). # |
| 3284 |
# For opclass 3 instructions, the 060 doesn't store the default # |
| 3285 |
# SNAN result out to memory or data register file as it should. # |
| 3286 |
# This code must emulate the move out before finally exiting through # |
| 3287 |
# _real_snan(). The move out, if to memory, is performed using # |
| 3288 |
# _mem_write() "callout" routines that may return a failing result. # |
| 3289 |
# In this special case, the handler must exit through facc_out() # |
| 3290 |
# which creates an access error stack frame from the current SNAN # |
| 3291 |
# stack frame. # |
| 3292 |
# For the case of an extended precision opclass 3 instruction, # |
| 3293 |
# if the effective addressing mode was -() or ()+, then the address # |
| 3294 |
# register must get updated by calling _calc_ea_fout(). If the <ea> # |
| 3295 |
# was -(a7) from supervisor mode, then the exception frame currently # |
| 3296 |
# on the system stack must be carefully moved "down" to make room # |
| 3297 |
# for the operand being moved. # |
| 3298 |
# # |
| 3299 |
######################################################################### |
| 3300 |
|
| 3301 |
global _fpsp_snan |
| 3302 |
_fpsp_snan: |
| 3303 |
|
| 3304 |
link.w %a6,&-LOCAL_SIZE # init stack frame |
| 3305 |
|
| 3306 |
fsave FP_SRC(%a6) # grab the "busy" frame |
| 3307 |
|
| 3308 |
movm.l &0x0303,EXC_DREGS(%a6) # save d0-d1/a0-a1 |
| 3309 |
fmovm.l %fpcr,%fpsr,%fpiar,USER_FPCR(%a6) # save ctrl regs |
| 3310 |
fmovm.x &0xc0,EXC_FPREGS(%a6) # save fp0-fp1 on stack |
| 3311 |
|
| 3312 |
# the FPIAR holds the "current PC" of the faulting instruction |
| 3313 |
mov.l USER_FPIAR(%a6),EXC_EXTWPTR(%a6) |
| 3314 |
|
| 3315 |
mov.l EXC_EXTWPTR(%a6),%a0 # fetch instruction addr |
| 3316 |
addq.l &0x4,EXC_EXTWPTR(%a6) # incr instruction ptr |
| 3317 |
bsr.l _imem_read_long # fetch the instruction words |
| 3318 |
mov.l %d0,EXC_OPWORD(%a6) |
| 3319 |
|
| 3320 |
############################################################################## |
| 3321 |
|
| 3322 |
btst &13,%d0 # is instr an fmove out? |
| 3323 |
bne.w fsnan_out # fmove out |
| 3324 |
|
| 3325 |
|
| 3326 |
# here, we simply see if the operand in the fsave frame needs to be "unskewed". |
| 3327 |
# this would be the case for opclass two operations with a source infinity or |
| 3328 |
# denorm operand in the sgl or dbl format. NANs also become skewed and must be |
| 3329 |
# fixed here. |
| 3330 |
lea FP_SRC(%a6),%a0 # pass: ptr to src op |
| 3331 |
bsr.l fix_skewed_ops # fix src op |
| 3332 |
|
| 3333 |
fsnan_exit: |
| 3334 |
fmovm.x EXC_FPREGS(%a6),&0xc0 # restore fp0-fp1 |
| 3335 |
fmovm.l USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs |
| 3336 |
movm.l EXC_DREGS(%a6),&0x0303 # restore d0-d1/a0-a1 |
| 3337 |
|
| 3338 |
frestore FP_SRC(%a6) |
| 3339 |
|
| 3340 |
unlk %a6 |
| 3341 |
bra.l _real_snan |
| 3342 |
|
| 3343 |
######################################################################## |
| 3344 |
|
| 3345 |
# |
| 3346 |
# the hardware does not save the default result to memory on enabled |
| 3347 |
# snan exceptions. we do this here before passing control to |
| 3348 |
# the user snan handler. |
| 3349 |
# |
| 3350 |
# byte, word, long, and packed destination format operations can pass |
| 3351 |
# through here. since packed format operations already were handled by |
| 3352 |
# fpsp_unsupp(), then we need to do nothing else for them here. |
| 3353 |
# for byte, word, and long, we simply need to test the sign of the src |
| 3354 |
# operand and save the appropriate minimum or maximum integer value |
| 3355 |
# to the effective address as pointed to by the stacked effective address. |
| 3356 |
# |
| 3357 |
fsnan_out: |
| 3358 |
|
| 3359 |
bfextu %d0{&19:&3},%d0 # extract dst format field |
| 3360 |
mov.b 1+EXC_OPWORD(%a6),%d1 # extract <ea> mode,reg |
| 3361 |
mov.w (tbl_snan.b,%pc,%d0.w*2),%a0 |
| 3362 |
jmp (tbl_snan.b,%pc,%a0) |
| 3363 |
|
| 3364 |
tbl_snan: |
| 3365 |
short fsnan_out_l - tbl_snan # long word integer |
| 3366 |
short fsnan_out_s - tbl_snan # sgl prec shouldn't happen |
| 3367 |
short fsnan_out_x - tbl_snan # ext prec shouldn't happen |
| 3368 |
short tbl_snan - tbl_snan # packed needs no help |
| 3369 |
short fsnan_out_w - tbl_snan # word integer |
| 3370 |
short fsnan_out_d - tbl_snan # dbl prec shouldn't happen |
| 3371 |
short fsnan_out_b - tbl_snan # byte integer |
| 3372 |
short tbl_snan - tbl_snan # packed needs no help |
| 3373 |
|
| 3374 |
fsnan_out_b: |
| 3375 |
mov.b FP_SRC_HI(%a6),%d0 # load upper byte of SNAN |
| 3376 |
bset &6,%d0 # set SNAN bit |
| 3377 |
cmpi.b %d1,&0x7 # is <ea> mode a data reg? |
| 3378 |
ble.b fsnan_out_b_dn # yes |
| 3379 |
mov.l EXC_EA(%a6),%a0 # pass: <ea> of default result |
| 3380 |
bsr.l _dmem_write_byte # write the default result |
| 3381 |
|
| 3382 |
tst.l %d1 # did dstore fail? |
| 3383 |
bne.l facc_out_b # yes |
| 3384 |
|
| 3385 |
bra.w fsnan_exit |
| 3386 |
fsnan_out_b_dn: |
| 3387 |
andi.w &0x0007,%d1 |
| 3388 |
bsr.l store_dreg_b # store result to regfile |
| 3389 |
bra.w fsnan_exit |
| 3390 |
|
| 3391 |
fsnan_out_w: |
| 3392 |
mov.w FP_SRC_HI(%a6),%d0 # load upper word of SNAN |
| 3393 |
bset &14,%d0 # set SNAN bit |
| 3394 |
cmpi.b %d1,&0x7 # is <ea> mode a data reg? |
| 3395 |
ble.b fsnan_out_w_dn # yes |
| 3396 |
mov.l EXC_EA(%a6),%a0 # pass: <ea> of default result |
| 3397 |
bsr.l _dmem_write_word # write the default result |
| 3398 |
|
| 3399 |
tst.l %d1 # did dstore fail? |
| 3400 |
bne.l facc_out_w # yes |
| 3401 |
|
| 3402 |
bra.w fsnan_exit |
| 3403 |
fsnan_out_w_dn: |
| 3404 |
andi.w &0x0007,%d1 |
| 3405 |
bsr.l store_dreg_w # store result to regfile |
| 3406 |
bra.w fsnan_exit |
| 3407 |
|
| 3408 |
fsnan_out_l: |
| 3409 |
mov.l FP_SRC_HI(%a6),%d0 # load upper longword of SNAN |
| 3410 |
bset &30,%d0 # set SNAN bit |
| 3411 |
cmpi.b %d1,&0x7 # is <ea> mode a data reg? |
| 3412 |
ble.b fsnan_out_l_dn # yes |
| 3413 |
mov.l EXC_EA(%a6),%a0 # pass: <ea> of default result |
| 3414 |
bsr.l _dmem_write_long # write the default result |
| 3415 |
|
| 3416 |
tst.l %d1 # did dstore fail? |
| 3417 |
bne.l facc_out_l # yes |
| 3418 |
|
| 3419 |
bra.w fsnan_exit |
| 3420 |
fsnan_out_l_dn: |
| 3421 |
andi.w &0x0007,%d1 |
| 3422 |
bsr.l store_dreg_l # store result to regfile |
| 3423 |
bra.w fsnan_exit |
| 3424 |
|
| 3425 |
fsnan_out_s: |
| 3426 |
cmpi.b %d1,&0x7 # is <ea> mode a data reg? |
| 3427 |
ble.b fsnan_out_d_dn # yes |
| 3428 |
mov.l FP_SRC_EX(%a6),%d0 # fetch SNAN sign |
| 3429 |
andi.l &0x80000000,%d0 # keep sign |
| 3430 |
ori.l &0x7fc00000,%d0 # insert new exponent,SNAN bit |
| 3431 |
mov.l FP_SRC_HI(%a6),%d1 # load mantissa |
| 3432 |
lsr.l &0x8,%d1 # shift mantissa for sgl |
| 3433 |
or.l %d1,%d0 # create sgl SNAN |
| 3434 |
mov.l EXC_EA(%a6),%a0 # pass: <ea> of default result |
| 3435 |
bsr.l _dmem_write_long # write the default result |
| 3436 |
|
| 3437 |
tst.l %d1 # did dstore fail? |
| 3438 |
bne.l facc_out_l # yes |
| 3439 |
|
| 3440 |
bra.w fsnan_exit |
| 3441 |
fsnan_out_d_dn: |
| 3442 |
mov.l FP_SRC_EX(%a6),%d0 # fetch SNAN sign |
| 3443 |
andi.l &0x80000000,%d0 # keep sign |
| 3444 |
ori.l &0x7fc00000,%d0 # insert new exponent,SNAN bit |
| 3445 |
mov.l %d1,-(%sp) |
| 3446 |
mov.l FP_SRC_HI(%a6),%d1 # load mantissa |
| 3447 |
lsr.l &0x8,%d1 # shift mantissa for sgl |
| 3448 |
or.l %d1,%d0 # create sgl SNAN |
| 3449 |
mov.l (%sp)+,%d1 |
| 3450 |
andi.w &0x0007,%d1 |
| 3451 |
bsr.l store_dreg_l # store result to regfile |
| 3452 |
bra.w fsnan_exit |
| 3453 |
|
| 3454 |
fsnan_out_d: |
| 3455 |
mov.l FP_SRC_EX(%a6),%d0 # fetch SNAN sign |
| 3456 |
andi.l &0x80000000,%d0 # keep sign |
| 3457 |
ori.l &0x7ff80000,%d0 # insert new exponent,SNAN bit |
| 3458 |
mov.l FP_SRC_HI(%a6),%d1 # load hi mantissa |
| 3459 |
mov.l %d0,FP_SCR0_EX(%a6) # store to temp space |
| 3460 |
mov.l &11,%d0 # load shift amt |
| 3461 |
lsr.l %d0,%d1 |
| 3462 |
or.l %d1,FP_SCR0_EX(%a6) # create dbl hi |
| 3463 |
mov.l FP_SRC_HI(%a6),%d1 # load hi mantissa |
| 3464 |
andi.l &0x000007ff,%d1 |
| 3465 |
ror.l %d0,%d1 |
| 3466 |
mov.l %d1,FP_SCR0_HI(%a6) # store to temp space |
| 3467 |
mov.l FP_SRC_LO(%a6),%d1 # load lo mantissa |
| 3468 |
lsr.l %d0,%d1 |
| 3469 |
or.l %d1,FP_SCR0_HI(%a6) # create dbl lo |
| 3470 |
lea FP_SCR0(%a6),%a0 # pass: ptr to operand |
| 3471 |
mov.l EXC_EA(%a6),%a1 # pass: dst addr |
| 3472 |
movq.l &0x8,%d0 # pass: size of 8 bytes |
| 3473 |
bsr.l _dmem_write # write the default result |
| 3474 |
|
| 3475 |
tst.l %d1 # did dstore fail? |
| 3476 |
bne.l facc_out_d # yes |
| 3477 |
|
| 3478 |
bra.w fsnan_exit |
| 3479 |
|
| 3480 |
# for extended precision, if the addressing mode is pre-decrement or |
| 3481 |
# post-increment, then the address register did not get updated. |
| 3482 |
# in addition, for pre-decrement, the stacked <ea> is incorrect. |
| 3483 |
fsnan_out_x: |
| 3484 |
clr.b SPCOND_FLG(%a6) # clear special case flag |
| 3485 |
|
| 3486 |
mov.w FP_SRC_EX(%a6),FP_SCR0_EX(%a6) |
| 3487 |
clr.w 2+FP_SCR0(%a6) |
| 3488 |
mov.l FP_SRC_HI(%a6),%d0 |
| 3489 |
bset &30,%d0 |
| 3490 |
mov.l %d0,FP_SCR0_HI(%a6) |
| 3491 |
mov.l FP_SRC_LO(%a6),FP_SCR0_LO(%a6) |
| 3492 |
|
| 3493 |
btst &0x5,EXC_SR(%a6) # supervisor mode exception? |
| 3494 |
bne.b fsnan_out_x_s # yes |
| 3495 |
|
| 3496 |
mov.l %usp,%a0 # fetch user stack pointer |
| 3497 |
mov.l %a0,EXC_A7(%a6) # save on stack for calc_ea() |
| 3498 |
mov.l (%a6),EXC_A6(%a6) |
| 3499 |
|
| 3500 |
bsr.l _calc_ea_fout # find the correct ea,update An |
| 3501 |
mov.l %a0,%a1 |
| 3502 |
mov.l %a0,EXC_EA(%a6) # stack correct <ea> |
| 3503 |
|
| 3504 |
mov.l EXC_A7(%a6),%a0 |
| 3505 |
mov.l %a0,%usp # restore user stack pointer |
| 3506 |
mov.l EXC_A6(%a6),(%a6) |
| 3507 |
|
| 3508 |
fsnan_out_x_save: |
| 3509 |
lea FP_SCR0(%a6),%a0 # pass: ptr to operand |
| 3510 |
movq.l &0xc,%d0 # pass: size of extended |
| 3511 |
bsr.l _dmem_write # write the default result |
| 3512 |
|
| 3513 |
tst.l %d1 # did dstore fail? |
| 3514 |
bne.l facc_out_x # yes |
| 3515 |
|
| 3516 |
bra.w fsnan_exit |
| 3517 |
|
| 3518 |
fsnan_out_x_s: |
| 3519 |
mov.l (%a6),EXC_A6(%a6) |
| 3520 |
|
| 3521 |
bsr.l _calc_ea_fout # find the correct ea,update An |
| 3522 |
mov.l %a0,%a1 |
| 3523 |
mov.l %a0,EXC_EA(%a6) # stack correct <ea> |
| 3524 |
|
| 3525 |
mov.l EXC_A6(%a6),(%a6) |
| 3526 |
|
| 3527 |
cmpi.b SPCOND_FLG(%a6),&mda7_flg # is <ea> mode -(a7)? |
| 3528 |
bne.b fsnan_out_x_save # no |
| 3529 |
|
| 3530 |
# the operation was "fmove.x SNAN,-(a7)" from supervisor mode. |
| 3531 |
fmovm.x EXC_FPREGS(%a6),&0xc0 # restore fp0-fp1 |
| 3532 |
fmovm.l USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs |
| 3533 |
movm.l EXC_DREGS(%a6),&0x0303 # restore d0-d1/a0-a1 |
| 3534 |
|
| 3535 |
frestore FP_SRC(%a6) |
| 3536 |
|
| 3537 |
mov.l EXC_A6(%a6),%a6 # restore frame pointer |
| 3538 |
|
| 3539 |
mov.l LOCAL_SIZE+EXC_SR(%sp),LOCAL_SIZE+EXC_SR-0xc(%sp) |
| 3540 |
mov.l LOCAL_SIZE+EXC_PC+0x2(%sp),LOCAL_SIZE+EXC_PC+0x2-0xc(%sp) |
| 3541 |
mov.l LOCAL_SIZE+EXC_EA(%sp),LOCAL_SIZE+EXC_EA-0xc(%sp) |
| 3542 |
|
| 3543 |
mov.l LOCAL_SIZE+FP_SCR0_EX(%sp),LOCAL_SIZE+EXC_SR(%sp) |
| 3544 |
mov.l LOCAL_SIZE+FP_SCR0_HI(%sp),LOCAL_SIZE+EXC_PC+0x2(%sp) |
| 3545 |
mov.l LOCAL_SIZE+FP_SCR0_LO(%sp),LOCAL_SIZE+EXC_EA(%sp) |
| 3546 |
|
| 3547 |
add.l &LOCAL_SIZE-0x8,%sp |
| 3548 |
|
| 3549 |
bra.l _real_snan |
| 3550 |
|
| 3551 |
######################################################################### |
| 3552 |
# XDEF **************************************************************** # |
| 3553 |
# _fpsp_inex(): 060FPSP entry point for FP Inexact exception. # |
| 3554 |
# # |
| 3555 |
# This handler should be the first code executed upon taking the # |
| 3556 |
# FP Inexact exception in an operating system. # |
| 3557 |
# # |
| 3558 |
# XREF **************************************************************** # |
| 3559 |
# _imem_read_long() - read instruction longword # |
| 3560 |
# fix_skewed_ops() - adjust src operand in fsave frame # |
| 3561 |
# set_tag_x() - determine optype of src/dst operands # |
| 3562 |
# store_fpreg() - store opclass 0 or 2 result to FP regfile # |
| 3563 |
# unnorm_fix() - change UNNORM operands to NORM or ZERO # |
| 3564 |
# load_fpn2() - load dst operand from FP regfile # |
| 3565 |
# smovcr() - emulate an "fmovcr" instruction # |
| 3566 |
# fout() - emulate an opclass 3 instruction # |
| 3567 |
# tbl_unsupp - add of table of emulation routines for opclass 0,2 # |
| 3568 |
# _real_inex() - "callout" to operating system inexact handler # |
| 3569 |
# # |
| 3570 |
# INPUT *************************************************************** # |
| 3571 |
# - The system stack contains the FP Inexact exception frame # |
| 3572 |
# - The fsave frame contains the source operand # |
| 3573 |
# # |
| 3574 |
# OUTPUT ************************************************************** # |
| 3575 |
# - The system stack is unchanged # |
| 3576 |
# - The fsave frame contains the adjusted src op for opclass 0,2 # |
| 3577 |
# # |
| 3578 |
# ALGORITHM *********************************************************** # |
| 3579 |
# In a system where the FP Inexact exception is enabled, the goal # |
| 3580 |
# is to get to the handler specified at _real_inex(). But, on the 060, # |
| 3581 |
# for opclass zero and two instruction taking this exception, the # |
| 3582 |
# hardware doesn't store the correct result to the destination FP # |
| 3583 |
# register as did the '040 and '881/2. This handler must emulate the # |
| 3584 |
# instruction in order to get this value and then store it to the # |
| 3585 |
# correct register before calling _real_inex(). # |
| 3586 |
# For opclass 3 instructions, the 060 doesn't store the default # |
| 3587 |
# inexact result out to memory or data register file as it should. # |
| 3588 |
# This code must emulate the move out by calling fout() before finally # |
| 3589 |
# exiting through _real_inex(). # |
| 3590 |
# # |
| 3591 |
######################################################################### |
| 3592 |
|
| 3593 |
global _fpsp_inex |
| 3594 |
_fpsp_inex: |
| 3595 |
|
| 3596 |
link.w %a6,&-LOCAL_SIZE # init stack frame |
| 3597 |
|
| 3598 |
fsave FP_SRC(%a6) # grab the "busy" frame |
| 3599 |
|
| 3600 |
movm.l &0x0303,EXC_DREGS(%a6) # save d0-d1/a0-a1 |
| 3601 |
fmovm.l %fpcr,%fpsr,%fpiar,USER_FPCR(%a6) # save ctrl regs |
| 3602 |
fmovm.x &0xc0,EXC_FPREGS(%a6) # save fp0-fp1 on stack |
| 3603 |
|
| 3604 |
# the FPIAR holds the "current PC" of the faulting instruction |
| 3605 |
mov.l USER_FPIAR(%a6),EXC_EXTWPTR(%a6) |
| 3606 |
|
| 3607 |
mov.l EXC_EXTWPTR(%a6),%a0 # fetch instruction addr |
| 3608 |
addq.l &0x4,EXC_EXTWPTR(%a6) # incr instruction ptr |
| 3609 |
bsr.l _imem_read_long # fetch the instruction words |
| 3610 |
mov.l %d0,EXC_OPWORD(%a6) |
| 3611 |
|
| 3612 |
############################################################################## |
| 3613 |
|
| 3614 |
btst &13,%d0 # is instr an fmove out? |
| 3615 |
bne.w finex_out # fmove out |
| 3616 |
|
| 3617 |
|
| 3618 |
# the hardware, for "fabs" and "fneg" w/ a long source format, puts the |
| 3619 |
# longword integer directly into the upper longword of the mantissa along |
| 3620 |
# w/ an exponent value of 0x401e. we convert this to extended precision here. |
| 3621 |
bfextu %d0{&19:&3},%d0 # fetch instr size |
| 3622 |
bne.b finex_cont # instr size is not long |
| 3623 |
cmpi.w FP_SRC_EX(%a6),&0x401e # is exponent 0x401e? |
| 3624 |
bne.b finex_cont # no |
| 3625 |
fmov.l &0x0,%fpcr |
| 3626 |
fmov.l FP_SRC_HI(%a6),%fp0 # load integer src |
| 3627 |
fmov.x %fp0,FP_SRC(%a6) # store integer as extended precision |
| 3628 |
mov.w &0xe001,0x2+FP_SRC(%a6) |
| 3629 |
|
| 3630 |
finex_cont: |
| 3631 |
lea FP_SRC(%a6),%a0 # pass: ptr to src op |
| 3632 |
bsr.l fix_skewed_ops # fix src op |
| 3633 |
|
| 3634 |
# Here, we zero the ccode and exception byte field since we're going to |
| 3635 |
# emulate the whole instruction. Notice, though, that we don't kill the |
| 3636 |
# INEX1 bit. This is because a packed op has long since been converted |
| 3637 |
# to extended before arriving here. Therefore, we need to retain the |
| 3638 |
# INEX1 bit from when the operand was first converted. |
| 3639 |
andi.l &0x00ff01ff,USER_FPSR(%a6) # zero all but accured field |
| 3640 |
|
| 3641 |
fmov.l &0x0,%fpcr # zero current control regs |
| 3642 |
fmov.l &0x0,%fpsr |
| 3643 |
|
| 3644 |
bfextu EXC_EXTWORD(%a6){&0:&6},%d1 # extract upper 6 of cmdreg |
| 3645 |
cmpi.b %d1,&0x17 # is op an fmovecr? |
| 3646 |
beq.w finex_fmovcr # yes |
| 3647 |
|
| 3648 |
lea FP_SRC(%a6),%a0 # pass: ptr to src op |
| 3649 |
bsr.l set_tag_x # tag the operand type |
| 3650 |
mov.b %d0,STAG(%a6) # maybe NORM,DENORM |
| 3651 |
|
| 3652 |
# bits four and five of the fp extension word separate the monadic and dyadic |
| 3653 |
# operations that can pass through fpsp_inex(). remember that fcmp and ftst |
| 3654 |
# will never take this exception, but fsincos will. |
| 3655 |
btst &0x5,1+EXC_CMDREG(%a6) # is operation monadic or dyadic? |
| 3656 |
beq.b finex_extract # monadic |
| 3657 |
|
| 3658 |
btst &0x4,1+EXC_CMDREG(%a6) # is operation an fsincos? |
| 3659 |
bne.b finex_extract # yes |
| 3660 |
|
| 3661 |
bfextu EXC_CMDREG(%a6){&6:&3},%d0 # dyadic; load dst reg |
| 3662 |
bsr.l load_fpn2 # load dst into FP_DST |
| 3663 |
|
| 3664 |
lea FP_DST(%a6),%a0 # pass: ptr to dst op |
| 3665 |
bsr.l set_tag_x # tag the operand type |
| 3666 |
cmpi.b %d0,&UNNORM # is operand an UNNORM? |
| 3667 |
bne.b finex_op2_done # no |
| 3668 |
bsr.l unnorm_fix # yes; convert to NORM,DENORM,or ZERO |
| 3669 |
finex_op2_done: |
| 3670 |
mov.b %d0,DTAG(%a6) # save dst optype tag |
| 3671 |
|
| 3672 |
finex_extract: |
| 3673 |
clr.l %d0 |
| 3674 |
mov.b FPCR_MODE(%a6),%d0 # pass rnd prec/mode |
| 3675 |
|
| 3676 |
mov.b 1+EXC_CMDREG(%a6),%d1 |
| 3677 |
andi.w &0x007f,%d1 # extract extension |
| 3678 |
|
| 3679 |
lea FP_SRC(%a6),%a0 |
| 3680 |
lea FP_DST(%a6),%a1 |
| 3681 |
|
| 3682 |
mov.l (tbl_unsupp.l,%pc,%d1.w*4),%d1 # fetch routine addr |
| 3683 |
jsr (tbl_unsupp.l,%pc,%d1.l*1) |
| 3684 |
|
| 3685 |
# the operation has been emulated. the result is in fp0. |
| 3686 |
finex_save: |
| 3687 |
bfextu EXC_CMDREG(%a6){&6:&3},%d0 |
| 3688 |
bsr.l store_fpreg |
| 3689 |
|
| 3690 |
finex_exit: |
| 3691 |
fmovm.x EXC_FPREGS(%a6),&0xc0 # restore fp0-fp1 |
| 3692 |
fmovm.l USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs |
| 3693 |
movm.l EXC_DREGS(%a6),&0x0303 # restore d0-d1/a0-a1 |
| 3694 |
|
| 3695 |
frestore FP_SRC(%a6) |
| 3696 |
|
| 3697 |
unlk %a6 |
| 3698 |
bra.l _real_inex |
| 3699 |
|
| 3700 |
finex_fmovcr: |
| 3701 |
clr.l %d0 |
| 3702 |
mov.b FPCR_MODE(%a6),%d0 # pass rnd prec,mode |
| 3703 |
mov.b 1+EXC_CMDREG(%a6),%d1 |
| 3704 |
andi.l &0x0000007f,%d1 # pass rom offset |
| 3705 |
bsr.l smovcr |
| 3706 |
bra.b finex_save |
| 3707 |
|
| 3708 |
######################################################################## |
| 3709 |
|
| 3710 |
# |
| 3711 |
# the hardware does not save the default result to memory on enabled |
| 3712 |
# inexact exceptions. we do this here before passing control to |
| 3713 |
# the user inexact handler. |
| 3714 |
# |
| 3715 |
# byte, word, and long destination format operations can pass |
| 3716 |
# through here. so can double and single precision. |
| 3717 |
# although packed opclass three operations can take inexact |
| 3718 |
# exceptions, they won't pass through here since they are caught |
| 3719 |
# first by the unsupported data format exception handler. that handler |
| 3720 |
# sends them directly to _real_inex() if necessary. |
| 3721 |
# |
| 3722 |
finex_out: |
| 3723 |
|
| 3724 |
mov.b &NORM,STAG(%a6) # src is a NORM |
| 3725 |
|
| 3726 |
clr.l %d0 |
| 3727 |
mov.b FPCR_MODE(%a6),%d0 # pass rnd prec,mode |
| 3728 |
|
| 3729 |
andi.l &0xffff00ff,USER_FPSR(%a6) # zero exception field |
| 3730 |
|
| 3731 |
lea FP_SRC(%a6),%a0 # pass ptr to src operand |
| 3732 |
|
| 3733 |
bsr.l fout # store the default result |
| 3734 |
|
| 3735 |
bra.b finex_exit |
| 3736 |
|
| 3737 |
######################################################################### |
| 3738 |
# XDEF **************************************************************** # |
| 3739 |
# _fpsp_dz(): 060FPSP entry point for FP DZ exception. # |
| 3740 |
# # |
| 3741 |
# This handler should be the first code executed upon taking # |
| 3742 |
# the FP DZ exception in an operating system. # |
| 3743 |
# # |
| 3744 |
# XREF **************************************************************** # |
| 3745 |
# _imem_read_long() - read instruction longword from memory # |
| 3746 |
# fix_skewed_ops() - adjust fsave operand # |
| 3747 |
# _real_dz() - "callout" exit point from FP DZ handler # |
| 3748 |
# # |
| 3749 |
# INPUT *************************************************************** # |
| 3750 |
# - The system stack contains the FP DZ exception stack. # |
| 3751 |
# - The fsave frame contains the source operand. # |
| 3752 |
# # |
| 3753 |
# OUTPUT ************************************************************** # |
| 3754 |
# - The system stack contains the FP DZ exception stack. # |
| 3755 |
# - The fsave frame contains the adjusted source operand. # |
| 3756 |
# # |
| 3757 |
# ALGORITHM *********************************************************** # |
| 3758 |
# In a system where the DZ exception is enabled, the goal is to # |
| 3759 |
# get to the handler specified at _real_dz(). But, on the 060, when the # |
| 3760 |
# exception is taken, the input operand in the fsave state frame may # |
| 3761 |
# be incorrect for some cases and need to be adjusted. So, this package # |
| 3762 |
# adjusts the operand using fix_skewed_ops() and then branches to # |
| 3763 |
# _real_dz(). # |
| 3764 |
# # |
| 3765 |
######################################################################### |
| 3766 |
|
| 3767 |
global _fpsp_dz |
| 3768 |
_fpsp_dz: |
| 3769 |
|
| 3770 |
link.w %a6,&-LOCAL_SIZE # init stack frame |
| 3771 |
|
| 3772 |
fsave FP_SRC(%a6) # grab the "busy" frame |
| 3773 |
|
| 3774 |
movm.l &0x0303,EXC_DREGS(%a6) # save d0-d1/a0-a1 |
| 3775 |
fmovm.l %fpcr,%fpsr,%fpiar,USER_FPCR(%a6) # save ctrl regs |
| 3776 |
fmovm.x &0xc0,EXC_FPREGS(%a6) # save fp0-fp1 on stack |
| 3777 |
|
| 3778 |
# the FPIAR holds the "current PC" of the faulting instruction |
| 3779 |
mov.l USER_FPIAR(%a6),EXC_EXTWPTR(%a6) |
| 3780 |
|
| 3781 |
mov.l EXC_EXTWPTR(%a6),%a0 # fetch instruction addr |
| 3782 |
addq.l &0x4,EXC_EXTWPTR(%a6) # incr instruction ptr |
| 3783 |
bsr.l _imem_read_long # fetch the instruction words |
| 3784 |
mov.l %d0,EXC_OPWORD(%a6) |
| 3785 |
|
| 3786 |
############################################################################## |
| 3787 |
|
| 3788 |
|
| 3789 |
# here, we simply see if the operand in the fsave frame needs to be "unskewed". |
| 3790 |
# this would be the case for opclass two operations with a source zero |
| 3791 |
# in the sgl or dbl format. |
| 3792 |
lea FP_SRC(%a6),%a0 # pass: ptr to src op |
| 3793 |
bsr.l fix_skewed_ops # fix src op |
| 3794 |
|
| 3795 |
fdz_exit: |
| 3796 |
fmovm.x EXC_FPREGS(%a6),&0xc0 # restore fp0-fp1 |
| 3797 |
fmovm.l USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs |
| 3798 |
movm.l EXC_DREGS(%a6),&0x0303 # restore d0-d1/a0-a1 |
| 3799 |
|
| 3800 |
frestore FP_SRC(%a6) |
| 3801 |
|
| 3802 |
unlk %a6 |
| 3803 |
bra.l _real_dz |
| 3804 |
|
| 3805 |
######################################################################### |
| 3806 |
# XDEF **************************************************************** # |
| 3807 |
# _fpsp_fline(): 060FPSP entry point for "Line F emulator" # |
| 3808 |
# exception when the "reduced" version of the # |
| 3809 |
# FPSP is implemented that does not emulate # |
| 3810 |
# FP unimplemented instructions. # |
| 3811 |
# # |
| 3812 |
# This handler should be the first code executed upon taking a # |
| 3813 |
# "Line F Emulator" exception in an operating system integrating # |
| 3814 |
# the reduced version of 060FPSP. # |
| 3815 |
# # |
| 3816 |
# XREF **************************************************************** # |
| 3817 |
# _real_fpu_disabled() - Handle "FPU disabled" exceptions # |
| 3818 |
# _real_fline() - Handle all other cases (treated equally) # |
| 3819 |
# # |
| 3820 |
# INPUT *************************************************************** # |
| 3821 |
# - The system stack contains a "Line F Emulator" exception # |
| 3822 |
# stack frame. # |
| 3823 |
# # |
| 3824 |
# OUTPUT ************************************************************** # |
| 3825 |
# - The system stack is unchanged. # |
| 3826 |
# # |
| 3827 |
# ALGORITHM *********************************************************** # |
| 3828 |
# When a "Line F Emulator" exception occurs in a system where # |
| 3829 |
# "FPU Unimplemented" instructions will not be emulated, the exception # |
| 3830 |
# can occur because then FPU is disabled or the instruction is to be # |
| 3831 |
# classifed as "Line F". This module determines which case exists and # |
| 3832 |
# calls the appropriate "callout". # |
| 3833 |
# # |
| 3834 |
######################################################################### |
| 3835 |
|
| 3836 |
global _fpsp_fline |
| 3837 |
_fpsp_fline: |
| 3838 |
|
| 3839 |
# check to see if the FPU is disabled. if so, jump to the OS entry |
| 3840 |
# point for that condition. |
| 3841 |
cmpi.w 0x6(%sp),&0x402c |
| 3842 |
beq.l _real_fpu_disabled |
| 3843 |
|
| 3844 |
bra.l _real_fline |
| 3845 |
|
| 3846 |
######################################################################### |
| 3847 |
# XDEF **************************************************************** # |
| 3848 |
# _dcalc_ea(): calc correct <ea> from <ea> stacked on exception # |
| 3849 |
# # |
| 3850 |
# XREF **************************************************************** # |
| 3851 |
# inc_areg() - increment an address register # |
| 3852 |
# dec_areg() - decrement an address register # |
| 3853 |
# # |
| 3854 |
# INPUT *************************************************************** # |
| 3855 |
# d0 = number of bytes to adjust <ea> by # |
| 3856 |
# # |
| 3857 |
# OUTPUT ************************************************************** # |
| 3858 |
# None # |
| 3859 |
# # |
| 3860 |
# ALGORITHM *********************************************************** # |
| 3861 |
# "Dummy" CALCulate Effective Address: # |
| 3862 |
# The stacked <ea> for FP unimplemented instructions and opclass # |
| 3863 |
# two packed instructions is correct with the exception of... # |
| 3864 |
# # |
| 3865 |
# 1) -(An) : The register is not updated regardless of size. # |
| 3866 |
# Also, for extended precision and packed, the # |
| 3867 |
# stacked <ea> value is 8 bytes too big # |
| 3868 |
# 2) (An)+ : The register is not updated. # |
| 3869 |
# 3) #<data> : The upper longword of the immediate operand is # |
| 3870 |
# stacked b,w,l and s sizes are completely stacked. # |
| 3871 |
# d,x, and p are not. # |
| 3872 |
# # |
| 3873 |
######################################################################### |
| 3874 |
|
| 3875 |
global _dcalc_ea |
| 3876 |
_dcalc_ea: |
| 3877 |
mov.l %d0, %a0 # move # bytes to %a0 |
| 3878 |
|
| 3879 |
mov.b 1+EXC_OPWORD(%a6), %d0 # fetch opcode word |
| 3880 |
mov.l %d0, %d1 # make a copy |
| 3881 |
|
| 3882 |
andi.w &0x38, %d0 # extract mode field |
| 3883 |
andi.l &0x7, %d1 # extract reg field |
| 3884 |
|
| 3885 |
cmpi.b %d0,&0x18 # is mode (An)+ ? |
| 3886 |
beq.b dcea_pi # yes |
| 3887 |
|
| 3888 |
cmpi.b %d0,&0x20 # is mode -(An) ? |
| 3889 |
beq.b dcea_pd # yes |
| 3890 |
|
| 3891 |
or.w %d1,%d0 # concat mode,reg |
| 3892 |
cmpi.b %d0,&0x3c # is mode #<data>? |
| 3893 |
|
| 3894 |
beq.b dcea_imm # yes |
| 3895 |
|
| 3896 |
mov.l EXC_EA(%a6),%a0 # return <ea> |
| 3897 |
rts |
| 3898 |
|
| 3899 |
# need to set immediate data flag here since we'll need to do |
| 3900 |
# an imem_read to fetch this later. |
| 3901 |
dcea_imm: |
| 3902 |
mov.b &immed_flg,SPCOND_FLG(%a6) |
| 3903 |
lea ([USER_FPIAR,%a6],0x4),%a0 # no; return <ea> |
| 3904 |
rts |
| 3905 |
|
| 3906 |
# here, the <ea> is stacked correctly. however, we must update the |
| 3907 |
# address register... |
| 3908 |
dcea_pi: |
| 3909 |
mov.l %a0,%d0 # pass amt to inc by |
| 3910 |
bsr.l inc_areg # inc addr register |
| 3911 |
|
| 3912 |
mov.l EXC_EA(%a6),%a0 # stacked <ea> is correct |
| 3913 |
rts |
| 3914 |
|
| 3915 |
# the <ea> is stacked correctly for all but extended and packed which |
| 3916 |
# the <ea>s are 8 bytes too large. |
| 3917 |
# it would make no sense to have a pre-decrement to a7 in supervisor |
| 3918 |
# mode so we don't even worry about this tricky case here : ) |
| 3919 |
dcea_pd: |
| 3920 |
mov.l %a0,%d0 # pass amt to dec by |
| 3921 |
bsr.l dec_areg # dec addr register |
| 3922 |
|
| 3923 |
mov.l EXC_EA(%a6),%a0 # stacked <ea> is correct |
| 3924 |
|
| 3925 |
cmpi.b %d0,&0xc # is opsize ext or packed? |
| 3926 |
beq.b dcea_pd2 # yes |
| 3927 |
rts |
| 3928 |
dcea_pd2: |
| 3929 |
sub.l &0x8,%a0 # correct <ea> |
| 3930 |
mov.l %a0,EXC_EA(%a6) # put correct <ea> on stack |
| 3931 |
rts |
| 3932 |
|
| 3933 |
######################################################################### |
| 3934 |
# XDEF **************************************************************** # |
| 3935 |
# _calc_ea_fout(): calculate correct stacked <ea> for extended # |
| 3936 |
# and packed data opclass 3 operations. # |
| 3937 |
# # |
| 3938 |
# XREF **************************************************************** # |
| 3939 |
# None # |
| 3940 |
# # |
| 3941 |
# INPUT *************************************************************** # |
| 3942 |
# None # |
| 3943 |
# # |
| 3944 |
# OUTPUT ************************************************************** # |
| 3945 |
# a0 = return correct effective address # |
| 3946 |
# # |
| 3947 |
# ALGORITHM *********************************************************** # |
| 3948 |
# For opclass 3 extended and packed data operations, the <ea> # |
| 3949 |
# stacked for the exception is incorrect for -(an) and (an)+ addressing # |
| 3950 |
# modes. Also, while we're at it, the index register itself must get # |
| 3951 |
# updated. # |
| 3952 |
# So, for -(an), we must subtract 8 off of the stacked <ea> value # |
| 3953 |
# and return that value as the correct <ea> and store that value in An. # |
| 3954 |
# For (an)+, the stacked <ea> is correct but we must adjust An by +12. # |
| 3955 |
# # |
| 3956 |
######################################################################### |
| 3957 |
|
| 3958 |
# This calc_ea is currently used to retrieve the correct <ea> |
| 3959 |
# for fmove outs of type extended and packed. |
| 3960 |
global _calc_ea_fout |
| 3961 |
_calc_ea_fout: |
| 3962 |
mov.b 1+EXC_OPWORD(%a6),%d0 # fetch opcode word |
| 3963 |
mov.l %d0,%d1 # make a copy |
| 3964 |
|
| 3965 |
andi.w &0x38,%d0 # extract mode field |
| 3966 |
andi.l &0x7,%d1 # extract reg field |
| 3967 |
|
| 3968 |
cmpi.b %d0,&0x18 # is mode (An)+ ? |
| 3969 |
beq.b ceaf_pi # yes |
| 3970 |
|
| 3971 |
cmpi.b %d0,&0x20 # is mode -(An) ? |
| 3972 |
beq.w ceaf_pd # yes |
| 3973 |
|
| 3974 |
mov.l EXC_EA(%a6),%a0 # stacked <ea> is correct |
| 3975 |
rts |
| 3976 |
|
| 3977 |
# (An)+ : extended and packed fmove out |
| 3978 |
# : stacked <ea> is correct |
| 3979 |
# : "An" not updated |
| 3980 |
ceaf_pi: |
| 3981 |
mov.w (tbl_ceaf_pi.b,%pc,%d1.w*2),%d1 |
| 3982 |
mov.l EXC_EA(%a6),%a0 |
| 3983 |
jmp (tbl_ceaf_pi.b,%pc,%d1.w*1) |
| 3984 |
|
| 3985 |
swbeg &0x8 |
| 3986 |
tbl_ceaf_pi: |
| 3987 |
short ceaf_pi0 - tbl_ceaf_pi |
| 3988 |
short ceaf_pi1 - tbl_ceaf_pi |
| 3989 |
short ceaf_pi2 - tbl_ceaf_pi |
| 3990 |
short ceaf_pi3 - tbl_ceaf_pi |
| 3991 |
short ceaf_pi4 - tbl_ceaf_pi |
| 3992 |
short ceaf_pi5 - tbl_ceaf_pi |
| 3993 |
short ceaf_pi6 - tbl_ceaf_pi |
| 3994 |
short ceaf_pi7 - tbl_ceaf_pi |
| 3995 |
|
| 3996 |
ceaf_pi0: |
| 3997 |
addi.l &0xc,EXC_DREGS+0x8(%a6) |
| 3998 |
rts |
| 3999 |
ceaf_pi1: |
| 4000 |
addi.l &0xc,EXC_DREGS+0xc(%a6) |
| 4001 |
rts |
| 4002 |
ceaf_pi2: |
| 4003 |
add.l &0xc,%a2 |
| 4004 |
rts |
| 4005 |
ceaf_pi3: |
| 4006 |
add.l &0xc,%a3 |
| 4007 |
rts |
| 4008 |
ceaf_pi4: |
| 4009 |
add.l &0xc,%a4 |
| 4010 |
rts |
| 4011 |
ceaf_pi5: |
| 4012 |
add.l &0xc,%a5 |
| 4013 |
rts |
| 4014 |
ceaf_pi6: |
| 4015 |
addi.l &0xc,EXC_A6(%a6) |
| 4016 |
rts |
| 4017 |
ceaf_pi7: |
| 4018 |
mov.b &mia7_flg,SPCOND_FLG(%a6) |
| 4019 |
addi.l &0xc,EXC_A7(%a6) |
| 4020 |
rts |
| 4021 |
|
| 4022 |
# -(An) : extended and packed fmove out |
| 4023 |
# : stacked <ea> = actual <ea> + 8 |
| 4024 |
# : "An" not updated |
| 4025 |
ceaf_pd: |
| 4026 |
mov.w (tbl_ceaf_pd.b,%pc,%d1.w*2),%d1 |
| 4027 |
mov.l EXC_EA(%a6),%a0 |
| 4028 |
sub.l &0x8,%a0 |
| 4029 |
sub.l &0x8,EXC_EA(%a6) |
| 4030 |
jmp (tbl_ceaf_pd.b,%pc,%d1.w*1) |
| 4031 |
|
| 4032 |
swbeg &0x8 |
| 4033 |
tbl_ceaf_pd: |
| 4034 |
short ceaf_pd0 - tbl_ceaf_pd |
| 4035 |
short ceaf_pd1 - tbl_ceaf_pd |
| 4036 |
short ceaf_pd2 - tbl_ceaf_pd |
| 4037 |
short ceaf_pd3 - tbl_ceaf_pd |
| 4038 |
short ceaf_pd4 - tbl_ceaf_pd |
| 4039 |
short ceaf_pd5 - tbl_ceaf_pd |
| 4040 |
short ceaf_pd6 - tbl_ceaf_pd |
| 4041 |
short ceaf_pd7 - tbl_ceaf_pd |
| 4042 |
|
| 4043 |
ceaf_pd0: |
| 4044 |
mov.l %a0,EXC_DREGS+0x8(%a6) |
| 4045 |
rts |
| 4046 |
ceaf_pd1: |
| 4047 |
mov.l %a0,EXC_DREGS+0xc(%a6) |
| 4048 |
rts |
| 4049 |
ceaf_pd2: |
| 4050 |
mov.l %a0,%a2 |
| 4051 |
rts |
| 4052 |
ceaf_pd3: |
| 4053 |
mov.l %a0,%a3 |
| 4054 |
rts |
| 4055 |
ceaf_pd4: |
| 4056 |
mov.l %a0,%a4 |
| 4057 |
rts |
| 4058 |
ceaf_pd5: |
| 4059 |
mov.l %a0,%a5 |
| 4060 |
rts |
| 4061 |
ceaf_pd6: |
| 4062 |
mov.l %a0,EXC_A6(%a6) |
| 4063 |
rts |
| 4064 |
ceaf_pd7: |
| 4065 |
mov.l %a0,EXC_A7(%a6) |
| 4066 |
mov.b &mda7_flg,SPCOND_FLG(%a6) |
| 4067 |
rts |
| 4068 |
|
| 4069 |
# |
| 4070 |
# This table holds the offsets of the emulation routines for each individual |
| 4071 |
# math operation relative to the address of this table. Included are |
| 4072 |
# routines like fadd/fmul/fabs. The transcendentals ARE NOT. This is because |
| 4073 |
# this table is for the version if the 060FPSP without transcendentals. |
| 4074 |
# The location within the table is determined by the extension bits of the |
| 4075 |
# operation longword. |
| 4076 |
# |
| 4077 |
|
| 4078 |
swbeg &109 |
| 4079 |
tbl_unsupp: |
| 4080 |
long fin - tbl_unsupp # 00: fmove |
| 4081 |
long fint - tbl_unsupp # 01: fint |
| 4082 |
long tbl_unsupp - tbl_unsupp # 02: fsinh |
| 4083 |
long fintrz - tbl_unsupp # 03: fintrz |
| 4084 |
long fsqrt - tbl_unsupp # 04: fsqrt |
| 4085 |
long tbl_unsupp - tbl_unsupp |
| 4086 |
long tbl_unsupp - tbl_unsupp # 06: flognp1 |
| 4087 |
long tbl_unsupp - tbl_unsupp |
| 4088 |
long tbl_unsupp - tbl_unsupp # 08: fetoxm1 |
| 4089 |
long tbl_unsupp - tbl_unsupp # 09: ftanh |
| 4090 |
long tbl_unsupp - tbl_unsupp # 0a: fatan |
| 4091 |
long tbl_unsupp - tbl_unsupp |
| 4092 |
long tbl_unsupp - tbl_unsupp # 0c: fasin |
| 4093 |
long tbl_unsupp - tbl_unsupp # 0d: fatanh |
| 4094 |
long tbl_unsupp - tbl_unsupp # 0e: fsin |
| 4095 |
long tbl_unsupp - tbl_unsupp # 0f: ftan |
| 4096 |
long tbl_unsupp - tbl_unsupp # 10: fetox |
| 4097 |
long tbl_unsupp - tbl_unsupp # 11: ftwotox |
| 4098 |
long tbl_unsupp - tbl_unsupp # 12: ftentox |
| 4099 |
long tbl_unsupp - tbl_unsupp |
| 4100 |
long tbl_unsupp - tbl_unsupp # 14: flogn |
| 4101 |
long tbl_unsupp - tbl_unsupp # 15: flog10 |
| 4102 |
long tbl_unsupp - tbl_unsupp # 16: flog2 |
| 4103 |
long tbl_unsupp - tbl_unsupp |
| 4104 |
long fabs - tbl_unsupp # 18: fabs |
| 4105 |
long tbl_unsupp - tbl_unsupp # 19: fcosh |
| 4106 |
long fneg - tbl_unsupp # 1a: fneg |
| 4107 |
long tbl_unsupp - tbl_unsupp |
| 4108 |
long tbl_unsupp - tbl_unsupp # 1c: facos |
| 4109 |
long tbl_unsupp - tbl_unsupp # 1d: fcos |
| 4110 |
long tbl_unsupp - tbl_unsupp # 1e: fgetexp |
| 4111 |
long tbl_unsupp - tbl_unsupp # 1f: fgetman |
| 4112 |
long fdiv - tbl_unsupp # 20: fdiv |
| 4113 |
long tbl_unsupp - tbl_unsupp # 21: fmod |
| 4114 |
long fadd - tbl_unsupp # 22: fadd |
| 4115 |
long fmul - tbl_unsupp # 23: fmul |
| 4116 |
long fsgldiv - tbl_unsupp # 24: fsgldiv |
| 4117 |
long tbl_unsupp - tbl_unsupp # 25: frem |
| 4118 |
long tbl_unsupp - tbl_unsupp # 26: fscale |
| 4119 |
long fsglmul - tbl_unsupp # 27: fsglmul |
| 4120 |
long fsub - tbl_unsupp # 28: fsub |
| 4121 |
long tbl_unsupp - tbl_unsupp |
| 4122 |
long tbl_unsupp - tbl_unsupp |
| 4123 |
long tbl_unsupp - tbl_unsupp |
| 4124 |
long tbl_unsupp - tbl_unsupp |
| 4125 |
long tbl_unsupp - tbl_unsupp |
| 4126 |
long tbl_unsupp - tbl_unsupp |
| 4127 |
long tbl_unsupp - tbl_unsupp |
| 4128 |
long tbl_unsupp - tbl_unsupp # 30: fsincos |
| 4129 |
long tbl_unsupp - tbl_unsupp # 31: fsincos |
| 4130 |
long tbl_unsupp - tbl_unsupp # 32: fsincos |
| 4131 |
long tbl_unsupp - tbl_unsupp # 33: fsincos |
| 4132 |
long tbl_unsupp - tbl_unsupp # 34: fsincos |
| 4133 |
long tbl_unsupp - tbl_unsupp # 35: fsincos |
| 4134 |
long tbl_unsupp - tbl_unsupp # 36: fsincos |
| 4135 |
long tbl_unsupp - tbl_unsupp # 37: fsincos |
| 4136 |
long fcmp - tbl_unsupp # 38: fcmp |
| 4137 |
long tbl_unsupp - tbl_unsupp |
| 4138 |
long ftst - tbl_unsupp # 3a: ftst |
| 4139 |
long tbl_unsupp - tbl_unsupp |
| 4140 |
long tbl_unsupp - tbl_unsupp |
| 4141 |
long tbl_unsupp - tbl_unsupp |
| 4142 |
long tbl_unsupp - tbl_unsupp |
| 4143 |
long tbl_unsupp - tbl_unsupp |
| 4144 |
long fsin - tbl_unsupp # 40: fsmove |
| 4145 |
long fssqrt - tbl_unsupp # 41: fssqrt |
| 4146 |
long tbl_unsupp - tbl_unsupp |
| 4147 |
long tbl_unsupp - tbl_unsupp |
| 4148 |
long fdin - tbl_unsupp # 44: fdmove |
| 4149 |
long fdsqrt - tbl_unsupp # 45: fdsqrt |
| 4150 |
long tbl_unsupp - tbl_unsupp |
| 4151 |
long tbl_unsupp - tbl_unsupp |
| 4152 |
long tbl_unsupp - tbl_unsupp |
| 4153 |
long tbl_unsupp - tbl_unsupp |
| 4154 |
long tbl_unsupp - tbl_unsupp |
| 4155 |
long tbl_unsupp - tbl_unsupp |
| 4156 |
long tbl_unsupp - tbl_unsupp |
| 4157 |
long tbl_unsupp - tbl_unsupp |
| 4158 |
long tbl_unsupp - tbl_unsupp |
| 4159 |
long tbl_unsupp - tbl_unsupp |
| 4160 |
long tbl_unsupp - tbl_unsupp |
| 4161 |
long tbl_unsupp - tbl_unsupp |
| 4162 |
long tbl_unsupp - tbl_unsupp |
| 4163 |
long tbl_unsupp - tbl_unsupp |
| 4164 |
long tbl_unsupp - tbl_unsupp |
| 4165 |
long tbl_unsupp - tbl_unsupp |
| 4166 |
long tbl_unsupp - tbl_unsupp |
| 4167 |
long tbl_unsupp - tbl_unsupp |
| 4168 |
long fsabs - tbl_unsupp # 58: fsabs |
| 4169 |
long tbl_unsupp - tbl_unsupp |
| 4170 |
long fsneg - tbl_unsupp # 5a: fsneg |
| 4171 |
long tbl_unsupp - tbl_unsupp |
| 4172 |
long fdabs - tbl_unsupp # 5c: fdabs |
| 4173 |
long tbl_unsupp - tbl_unsupp |
| 4174 |
long fdneg - tbl_unsupp # 5e: fdneg |
| 4175 |
long tbl_unsupp - tbl_unsupp |
| 4176 |
long fsdiv - tbl_unsupp # 60: fsdiv |
| 4177 |
long tbl_unsupp - tbl_unsupp |
| 4178 |
long fsadd - tbl_unsupp # 62: fsadd |
| 4179 |
long fsmul - tbl_unsupp # 63: fsmul |
| 4180 |
long fddiv - tbl_unsupp # 64: fddiv |
| 4181 |
long tbl_unsupp - tbl_unsupp |
| 4182 |
long fdadd - tbl_unsupp # 66: fdadd |
| 4183 |
long fdmul - tbl_unsupp # 67: fdmul |
| 4184 |
long fssub - tbl_unsupp # 68: fssub |
| 4185 |
long tbl_unsupp - tbl_unsupp |
| 4186 |
long tbl_unsupp - tbl_unsupp |
| 4187 |
long tbl_unsupp - tbl_unsupp |
| 4188 |
long fdsub - tbl_unsupp # 6c: fdsub |
| 4189 |
|
| 4190 |
################################################# |
| 4191 |
# Add this here so non-fp modules can compile. |
| 4192 |
# (smovcr is called from fpsp_inex.) |
| 4193 |
global smovcr |
| 4194 |
smovcr: |
| 4195 |
bra.b smovcr |
| 4196 |
|
| 4197 |
######################################################################### |
| 4198 |
# XDEF **************************************************************** # |
| 4199 |
# fmovm_dynamic(): emulate "fmovm" dynamic instruction # |
| 4200 |
# # |
| 4201 |
# XREF **************************************************************** # |
| 4202 |
# fetch_dreg() - fetch data register # |
| 4203 |
# {i,d,}mem_read() - fetch data from memory # |
| 4204 |
# _mem_write() - write data to memory # |
| 4205 |
# iea_iacc() - instruction memory access error occurred # |
| 4206 |
# iea_dacc() - data memory access error occurred # |
| 4207 |
# restore() - restore An index regs if access error occurred # |
| 4208 |
# # |
| 4209 |
# INPUT *************************************************************** # |
| 4210 |
# None # |
| 4211 |
# # |
| 4212 |
# OUTPUT ************************************************************** # |
| 4213 |
# If instr is "fmovm Dn,-(A7)" from supervisor mode, # |
| 4214 |
# d0 = size of dump # |
| 4215 |
# d1 = Dn # |
| 4216 |
# Else if instruction access error, # |
| 4217 |
# d0 = FSLW # |
| 4218 |
# Else if data access error, # |
| 4219 |
# d0 = FSLW # |
| 4220 |
# a0 = address of fault # |
| 4221 |
# Else # |
| 4222 |
# none. # |
| 4223 |
# # |
| 4224 |
# ALGORITHM *********************************************************** # |
| 4225 |
# The effective address must be calculated since this is entered # |
| 4226 |
# from an "Unimplemented Effective Address" exception handler. So, we # |
| 4227 |
# have our own fcalc_ea() routine here. If an access error is flagged # |
| 4228 |
# by a _{i,d,}mem_read() call, we must exit through the special # |
| 4229 |
# handler. # |
| 4230 |
# The data register is determined and its value loaded to get the # |
| 4231 |
# string of FP registers affected. This value is used as an index into # |
| 4232 |
# a lookup table such that we can determine the number of bytes # |
| 4233 |
# involved. # |
| 4234 |
# If the instruction is "fmovm.x <ea>,Dn", a _mem_read() is used # |
| 4235 |
# to read in all FP values. Again, _mem_read() may fail and require a # |
| 4236 |
# special exit. # |
| 4237 |
# If the instruction is "fmovm.x DN,<ea>", a _mem_write() is used # |
| 4238 |
# to write all FP values. _mem_write() may also fail. # |
| 4239 |
# If the instruction is "fmovm.x DN,-(a7)" from supervisor mode, # |
| 4240 |
# then we return the size of the dump and the string to the caller # |
| 4241 |
# so that the move can occur outside of this routine. This special # |
| 4242 |
# case is required so that moves to the system stack are handled # |
| 4243 |
# correctly. # |
| 4244 |
# # |
| 4245 |
# DYNAMIC: # |
| 4246 |
# fmovm.x dn, <ea> # |
| 4247 |
# fmovm.x <ea>, dn # |
| 4248 |
# # |
| 4249 |
# <WORD 1> <WORD2> # |
| 4250 |
# 1111 0010 00 |<ea>| 11@& 1000 0$$$ 0000 # |
| 4251 |
# # |
| 4252 |
# & = (0): predecrement addressing mode # |
| 4253 |
# (1): postincrement or control addressing mode # |
| 4254 |
# @ = (0): move listed regs from memory to the FPU # |
| 4255 |
# (1): move listed regs from the FPU to memory # |
| 4256 |
# $$$ : index of data register holding reg select mask # |
| 4257 |
# # |
| 4258 |
# NOTES: # |
| 4259 |
# If the data register holds a zero, then the # |
| 4260 |
# instruction is a nop. # |
| 4261 |
# # |
| 4262 |
######################################################################### |
| 4263 |
|
| 4264 |
global fmovm_dynamic |
| 4265 |
fmovm_dynamic: |
| 4266 |
|
| 4267 |
# extract the data register in which the bit string resides... |
| 4268 |
mov.b 1+EXC_EXTWORD(%a6),%d1 # fetch extword |
| 4269 |
andi.w &0x70,%d1 # extract reg bits |
| 4270 |
lsr.b &0x4,%d1 # shift into lo bits |
| 4271 |
|
| 4272 |
# fetch the bit string into d0... |
| 4273 |
bsr.l fetch_dreg # fetch reg string |
| 4274 |
|
| 4275 |
andi.l &0x000000ff,%d0 # keep only lo byte |
| 4276 |
|
| 4277 |
mov.l %d0,-(%sp) # save strg |
| 4278 |
mov.b (tbl_fmovm_size.w,%pc,%d0),%d0 |
| 4279 |
mov.l %d0,-(%sp) # save size |
| 4280 |
bsr.l fmovm_calc_ea # calculate <ea> |
| 4281 |
mov.l (%sp)+,%d0 # restore size |
| 4282 |
mov.l (%sp)+,%d1 # restore strg |
| 4283 |
|
| 4284 |
# if the bit string is a zero, then the operation is a no-op |
| 4285 |
# but, make sure that we've calculated ea and advanced the opword pointer |
| 4286 |
beq.w fmovm_data_done |
| 4287 |
|
| 4288 |
# separate move ins from move outs... |
| 4289 |
btst &0x5,EXC_EXTWORD(%a6) # is it a move in or out? |
| 4290 |
beq.w fmovm_data_in # it's a move out |
| 4291 |
|
| 4292 |
############# |
| 4293 |
# MOVE OUT: # |
| 4294 |
############# |
| 4295 |
fmovm_data_out: |
| 4296 |
btst &0x4,EXC_EXTWORD(%a6) # control or predecrement? |
| 4297 |
bne.w fmovm_out_ctrl # control |
| 4298 |
|
| 4299 |
############################ |
| 4300 |
fmovm_out_predec: |
| 4301 |
# for predecrement mode, the bit string is the opposite of both control |
| 4302 |
# operations and postincrement mode. (bit7 = FP7 ... bit0 = FP0) |
| 4303 |
# here, we convert it to be just like the others... |
| 4304 |
mov.b (tbl_fmovm_convert.w,%pc,%d1.w*1),%d1 |
| 4305 |
|
| 4306 |
btst &0x5,EXC_SR(%a6) # user or supervisor mode? |
| 4307 |
beq.b fmovm_out_ctrl # user |
| 4308 |
|
| 4309 |
fmovm_out_predec_s: |
| 4310 |
cmpi.b SPCOND_FLG(%a6),&mda7_flg # is <ea> mode -(a7)? |
| 4311 |
bne.b fmovm_out_ctrl |
| 4312 |
|
| 4313 |
# the operation was unfortunately an: fmovm.x dn,-(sp) |
| 4314 |
# called from supervisor mode. |
| 4315 |
# we're also passing "size" and "strg" back to the calling routine |
| 4316 |
rts |
| 4317 |
|
| 4318 |
############################ |
| 4319 |
fmovm_out_ctrl: |
| 4320 |
mov.l %a0,%a1 # move <ea> to a1 |
| 4321 |
|
| 4322 |
sub.l %d0,%sp # subtract size of dump |
| 4323 |
lea (%sp),%a0 |
| 4324 |
|
| 4325 |
tst.b %d1 # should FP0 be moved? |
| 4326 |
bpl.b fmovm_out_ctrl_fp1 # no |
| 4327 |
|
| 4328 |
mov.l 0x0+EXC_FP0(%a6),(%a0)+ # yes |
| 4329 |
mov.l 0x4+EXC_FP0(%a6),(%a0)+ |
| 4330 |
mov.l 0x8+EXC_FP0(%a6),(%a0)+ |
| 4331 |
|
| 4332 |
fmovm_out_ctrl_fp1: |
| 4333 |
lsl.b &0x1,%d1 # should FP1 be moved? |
| 4334 |
bpl.b fmovm_out_ctrl_fp2 # no |
| 4335 |
|
| 4336 |
mov.l 0x0+EXC_FP1(%a6),(%a0)+ # yes |
| 4337 |
mov.l 0x4+EXC_FP1(%a6),(%a0)+ |
| 4338 |
mov.l 0x8+EXC_FP1(%a6),(%a0)+ |
| 4339 |
|
| 4340 |
fmovm_out_ctrl_fp2: |
| 4341 |
lsl.b &0x1,%d1 # should FP2 be moved? |
| 4342 |
bpl.b fmovm_out_ctrl_fp3 # no |
| 4343 |
|
| 4344 |
fmovm.x &0x20,(%a0) # yes |
| 4345 |
add.l &0xc,%a0 |
| 4346 |
|
| 4347 |
fmovm_out_ctrl_fp3: |
| 4348 |
lsl.b &0x1,%d1 # should FP3 be moved? |
| 4349 |
bpl.b fmovm_out_ctrl_fp4 # no |
| 4350 |
|
| 4351 |
fmovm.x &0x10,(%a0) # yes |
| 4352 |
add.l &0xc,%a0 |
| 4353 |
|
| 4354 |
fmovm_out_ctrl_fp4: |
| 4355 |
lsl.b &0x1,%d1 # should FP4 be moved? |
| 4356 |
bpl.b fmovm_out_ctrl_fp5 # no |
| 4357 |
|
| 4358 |
fmovm.x &0x08,(%a0) # yes |
| 4359 |
add.l &0xc,%a0 |
| 4360 |
|
| 4361 |
fmovm_out_ctrl_fp5: |
| 4362 |
lsl.b &0x1,%d1 # should FP5 be moved? |
| 4363 |
bpl.b fmovm_out_ctrl_fp6 # no |
| 4364 |
|
| 4365 |
fmovm.x &0x04,(%a0) # yes |
| 4366 |
add.l &0xc,%a0 |
| 4367 |
|
| 4368 |
fmovm_out_ctrl_fp6: |
| 4369 |
lsl.b &0x1,%d1 # should FP6 be moved? |
| 4370 |
bpl.b fmovm_out_ctrl_fp7 # no |
| 4371 |
|
| 4372 |
fmovm.x &0x02,(%a0) # yes |
| 4373 |
add.l &0xc,%a0 |
| 4374 |
|
| 4375 |
fmovm_out_ctrl_fp7: |
| 4376 |
lsl.b &0x1,%d1 # should FP7 be moved? |
| 4377 |
bpl.b fmovm_out_ctrl_done # no |
| 4378 |
|
| 4379 |
fmovm.x &0x01,(%a0) # yes |
| 4380 |
add.l &0xc,%a0 |
| 4381 |
|
| 4382 |
fmovm_out_ctrl_done: |
| 4383 |
mov.l %a1,L_SCR1(%a6) |
| 4384 |
|
| 4385 |
lea (%sp),%a0 # pass: supervisor src |
| 4386 |
mov.l %d0,-(%sp) # save size |
| 4387 |
bsr.l _dmem_write # copy data to user mem |
| 4388 |
|
| 4389 |
mov.l (%sp)+,%d0 |
| 4390 |
add.l %d0,%sp # clear fpreg data from stack |
| 4391 |
|
| 4392 |
tst.l %d1 # did dstore err? |
| 4393 |
bne.w fmovm_out_err # yes |
| 4394 |
|
| 4395 |
rts |
| 4396 |
|
| 4397 |
############ |
| 4398 |
# MOVE IN: # |
| 4399 |
############ |
| 4400 |
fmovm_data_in: |
| 4401 |
mov.l %a0,L_SCR1(%a6) |
| 4402 |
|
| 4403 |
sub.l %d0,%sp # make room for fpregs |
| 4404 |
lea (%sp),%a1 |
| 4405 |
|
| 4406 |
mov.l %d1,-(%sp) # save bit string for later |
| 4407 |
mov.l %d0,-(%sp) # save # of bytes |
| 4408 |
|
| 4409 |
bsr.l _dmem_read # copy data from user mem |
| 4410 |
|
| 4411 |
mov.l (%sp)+,%d0 # retrieve # of bytes |
| 4412 |
|
| 4413 |
tst.l %d1 # did dfetch fail? |
| 4414 |
bne.w fmovm_in_err # yes |
| 4415 |
|
| 4416 |
mov.l (%sp)+,%d1 # load bit string |
| 4417 |
|
| 4418 |
lea (%sp),%a0 # addr of stack |
| 4419 |
|
| 4420 |
tst.b %d1 # should FP0 be moved? |
| 4421 |
bpl.b fmovm_data_in_fp1 # no |
| 4422 |
|
| 4423 |
mov.l (%a0)+,0x0+EXC_FP0(%a6) # yes |
| 4424 |
mov.l (%a0)+,0x4+EXC_FP0(%a6) |
| 4425 |
mov.l (%a0)+,0x8+EXC_FP0(%a6) |
| 4426 |
|
| 4427 |
fmovm_data_in_fp1: |
| 4428 |
lsl.b &0x1,%d1 # should FP1 be moved? |
| 4429 |
bpl.b fmovm_data_in_fp2 # no |
| 4430 |
|
| 4431 |
mov.l (%a0)+,0x0+EXC_FP1(%a6) # yes |
| 4432 |
mov.l (%a0)+,0x4+EXC_FP1(%a6) |
| 4433 |
mov.l (%a0)+,0x8+EXC_FP1(%a6) |
| 4434 |
|
| 4435 |
fmovm_data_in_fp2: |
| 4436 |
lsl.b &0x1,%d1 # should FP2 be moved? |
| 4437 |
bpl.b fmovm_data_in_fp3 # no |
| 4438 |
|
| 4439 |
fmovm.x (%a0)+,&0x20 # yes |
| 4440 |
|
| 4441 |
fmovm_data_in_fp3: |
| 4442 |
lsl.b &0x1,%d1 # should FP3 be moved? |
| 4443 |
bpl.b fmovm_data_in_fp4 # no |
| 4444 |
|
| 4445 |
fmovm.x (%a0)+,&0x10 # yes |
| 4446 |
|
| 4447 |
fmovm_data_in_fp4: |
| 4448 |
lsl.b &0x1,%d1 # should FP4 be moved? |
| 4449 |
bpl.b fmovm_data_in_fp5 # no |
| 4450 |
|
| 4451 |
fmovm.x (%a0)+,&0x08 # yes |
| 4452 |
|
| 4453 |
fmovm_data_in_fp5: |
| 4454 |
lsl.b &0x1,%d1 # should FP5 be moved? |
| 4455 |
bpl.b fmovm_data_in_fp6 # no |
| 4456 |
|
| 4457 |
fmovm.x (%a0)+,&0x04 # yes |
| 4458 |
|
| 4459 |
fmovm_data_in_fp6: |
| 4460 |
lsl.b &0x1,%d1 # should FP6 be moved? |
| 4461 |
bpl.b fmovm_data_in_fp7 # no |
| 4462 |
|
| 4463 |
fmovm.x (%a0)+,&0x02 # yes |
| 4464 |
|
| 4465 |
fmovm_data_in_fp7: |
| 4466 |
lsl.b &0x1,%d1 # should FP7 be moved? |
| 4467 |
bpl.b fmovm_data_in_done # no |
| 4468 |
|
| 4469 |
fmovm.x (%a0)+,&0x01 # yes |
| 4470 |
|
| 4471 |
fmovm_data_in_done: |
| 4472 |
add.l %d0,%sp # remove fpregs from stack |
| 4473 |
rts |
| 4474 |
|
| 4475 |
##################################### |
| 4476 |
|
| 4477 |
fmovm_data_done: |
| 4478 |
rts |
| 4479 |
|
| 4480 |
############################################################################## |
| 4481 |
|
| 4482 |
# |
| 4483 |
# table indexed by the operation's bit string that gives the number |
| 4484 |
# of bytes that will be moved. |
| 4485 |
# |
| 4486 |
# number of bytes = (# of 1's in bit string) * 12(bytes/fpreg) |
| 4487 |
# |
| 4488 |
tbl_fmovm_size: |
| 4489 |
byte 0x00,0x0c,0x0c,0x18,0x0c,0x18,0x18,0x24 |
| 4490 |
byte 0x0c,0x18,0x18,0x24,0x18,0x24,0x24,0x30 |
| 4491 |
byte 0x0c,0x18,0x18,0x24,0x18,0x24,0x24,0x30 |
| 4492 |
byte 0x18,0x24,0x24,0x30,0x24,0x30,0x30,0x3c |
| 4493 |
byte 0x0c,0x18,0x18,0x24,0x18,0x24,0x24,0x30 |
| 4494 |
byte 0x18,0x24,0x24,0x30,0x24,0x30,0x30,0x3c |
| 4495 |
byte 0x18,0x24,0x24,0x30,0x24,0x30,0x30,0x3c |
| 4496 |
byte 0x24,0x30,0x30,0x3c,0x30,0x3c,0x3c,0x48 |
| 4497 |
byte 0x0c,0x18,0x18,0x24,0x18,0x24,0x24,0x30 |
| 4498 |
byte 0x18,0x24,0x24,0x30,0x24,0x30,0x30,0x3c |
| 4499 |
byte 0x18,0x24,0x24,0x30,0x24,0x30,0x30,0x3c |
| 4500 |
byte 0x24,0x30,0x30,0x3c,0x30,0x3c,0x3c,0x48 |
| 4501 |
byte 0x18,0x24,0x24,0x30,0x24,0x30,0x30,0x3c |
| 4502 |
byte 0x24,0x30,0x30,0x3c,0x30,0x3c,0x3c,0x48 |
| 4503 |
byte 0x24,0x30,0x30,0x3c,0x30,0x3c,0x3c,0x48 |
| 4504 |
byte 0x30,0x3c,0x3c,0x48,0x3c,0x48,0x48,0x54 |
| 4505 |
byte 0x0c,0x18,0x18,0x24,0x18,0x24,0x24,0x30 |
| 4506 |
byte 0x18,0x24,0x24,0x30,0x24,0x30,0x30,0x3c |
| 4507 |
byte 0x18,0x24,0x24,0x30,0x24,0x30,0x30,0x3c |
| 4508 |
byte 0x24,0x30,0x30,0x3c,0x30,0x3c,0x3c,0x48 |
| 4509 |
byte 0x18,0x24,0x24,0x30,0x24,0x30,0x30,0x3c |
| 4510 |
byte 0x24,0x30,0x30,0x3c,0x30,0x3c,0x3c,0x48 |
| 4511 |
byte 0x24,0x30,0x30,0x3c,0x30,0x3c,0x3c,0x48 |
| 4512 |
byte 0x30,0x3c,0x3c,0x48,0x3c,0x48,0x48,0x54 |
| 4513 |
byte 0x18,0x24,0x24,0x30,0x24,0x30,0x30,0x3c |
| 4514 |
byte 0x24,0x30,0x30,0x3c,0x30,0x3c,0x3c,0x48 |
| 4515 |
byte 0x24,0x30,0x30,0x3c,0x30,0x3c,0x3c,0x48 |
| 4516 |
byte 0x30,0x3c,0x3c,0x48,0x3c,0x48,0x48,0x54 |
| 4517 |
byte 0x24,0x30,0x30,0x3c,0x30,0x3c,0x3c,0x48 |
| 4518 |
byte 0x30,0x3c,0x3c,0x48,0x3c,0x48,0x48,0x54 |
| 4519 |
byte 0x30,0x3c,0x3c,0x48,0x3c,0x48,0x48,0x54 |
| 4520 |
byte 0x3c,0x48,0x48,0x54,0x48,0x54,0x54,0x60 |
| 4521 |
|
| 4522 |
# |
| 4523 |
# table to convert a pre-decrement bit string into a post-increment |
| 4524 |
# or control bit string. |
| 4525 |
# ex: 0x00 ==> 0x00 |
| 4526 |
# 0x01 ==> 0x80 |
| 4527 |
# 0x02 ==> 0x40 |
| 4528 |
# . |
| 4529 |
# . |
| 4530 |
# 0xfd ==> 0xbf |
| 4531 |
# 0xfe ==> 0x7f |
| 4532 |
# 0xff ==> 0xff |
| 4533 |
# |
| 4534 |
tbl_fmovm_convert: |
| 4535 |
byte 0x00,0x80,0x40,0xc0,0x20,0xa0,0x60,0xe0 |
| 4536 |
byte 0x10,0x90,0x50,0xd0,0x30,0xb0,0x70,0xf0 |
| 4537 |
byte 0x08,0x88,0x48,0xc8,0x28,0xa8,0x68,0xe8 |
| 4538 |
byte 0x18,0x98,0x58,0xd8,0x38,0xb8,0x78,0xf8 |
| 4539 |
byte 0x04,0x84,0x44,0xc4,0x24,0xa4,0x64,0xe4 |
| 4540 |
byte 0x14,0x94,0x54,0xd4,0x34,0xb4,0x74,0xf4 |
| 4541 |
byte 0x0c,0x8c,0x4c,0xcc,0x2c,0xac,0x6c,0xec |
| 4542 |
byte 0x1c,0x9c,0x5c,0xdc,0x3c,0xbc,0x7c,0xfc |
| 4543 |
byte 0x02,0x82,0x42,0xc2,0x22,0xa2,0x62,0xe2 |
| 4544 |
byte 0x12,0x92,0x52,0xd2,0x32,0xb2,0x72,0xf2 |
| 4545 |
byte 0x0a,0x8a,0x4a,0xca,0x2a,0xaa,0x6a,0xea |
| 4546 |
byte 0x1a,0x9a,0x5a,0xda,0x3a,0xba,0x7a,0xfa |
| 4547 |
byte 0x06,0x86,0x46,0xc6,0x26,0xa6,0x66,0xe6 |
| 4548 |
byte 0x16,0x96,0x56,0xd6,0x36,0xb6,0x76,0xf6 |
| 4549 |
byte 0x0e,0x8e,0x4e,0xce,0x2e,0xae,0x6e,0xee |
| 4550 |
byte 0x1e,0x9e,0x5e,0xde,0x3e,0xbe,0x7e,0xfe |
| 4551 |
byte 0x01,0x81,0x41,0xc1,0x21,0xa1,0x61,0xe1 |
| 4552 |
byte 0x11,0x91,0x51,0xd1,0x31,0xb1,0x71,0xf1 |
| 4553 |
byte 0x09,0x89,0x49,0xc9,0x29,0xa9,0x69,0xe9 |
| 4554 |
byte 0x19,0x99,0x59,0xd9,0x39,0xb9,0x79,0xf9 |
| 4555 |
byte 0x05,0x85,0x45,0xc5,0x25,0xa5,0x65,0xe5 |
| 4556 |
byte 0x15,0x95,0x55,0xd5,0x35,0xb5,0x75,0xf5 |
| 4557 |
byte 0x0d,0x8d,0x4d,0xcd,0x2d,0xad,0x6d,0xed |
| 4558 |
byte 0x1d,0x9d,0x5d,0xdd,0x3d,0xbd,0x7d,0xfd |
| 4559 |
byte 0x03,0x83,0x43,0xc3,0x23,0xa3,0x63,0xe3 |
| 4560 |
byte 0x13,0x93,0x53,0xd3,0x33,0xb3,0x73,0xf3 |
| 4561 |
byte 0x0b,0x8b,0x4b,0xcb,0x2b,0xab,0x6b,0xeb |
| 4562 |
byte 0x1b,0x9b,0x5b,0xdb,0x3b,0xbb,0x7b,0xfb |
| 4563 |
byte 0x07,0x87,0x47,0xc7,0x27,0xa7,0x67,0xe7 |
| 4564 |
byte 0x17,0x97,0x57,0xd7,0x37,0xb7,0x77,0xf7 |
| 4565 |
byte 0x0f,0x8f,0x4f,0xcf,0x2f,0xaf,0x6f,0xef |
| 4566 |
byte 0x1f,0x9f,0x5f,0xdf,0x3f,0xbf,0x7f,0xff |
| 4567 |
|
| 4568 |
global fmovm_calc_ea |
| 4569 |
############################################### |
| 4570 |
# _fmovm_calc_ea: calculate effective address # |
| 4571 |
############################################### |
| 4572 |
fmovm_calc_ea: |
| 4573 |
mov.l %d0,%a0 # move # bytes to a0 |
| 4574 |
|
| 4575 |
# currently, MODE and REG are taken from the EXC_OPWORD. this could be |
| 4576 |
# easily changed if they were inputs passed in registers. |
| 4577 |
mov.w EXC_OPWORD(%a6),%d0 # fetch opcode word |
| 4578 |
mov.w %d0,%d1 # make a copy |
| 4579 |
|
| 4580 |
andi.w &0x3f,%d0 # extract mode field |
| 4581 |
andi.l &0x7,%d1 # extract reg field |
| 4582 |
|
| 4583 |
# jump to the corresponding function for each {MODE,REG} pair. |
| 4584 |
mov.w (tbl_fea_mode.b,%pc,%d0.w*2),%d0 # fetch jmp distance |
| 4585 |
jmp (tbl_fea_mode.b,%pc,%d0.w*1) # jmp to correct ea mode |
| 4586 |
|
| 4587 |
swbeg &64 |
| 4588 |
tbl_fea_mode: |
| 4589 |
short tbl_fea_mode - tbl_fea_mode |
| 4590 |
short tbl_fea_mode - tbl_fea_mode |
| 4591 |
short tbl_fea_mode - tbl_fea_mode |
| 4592 |
short tbl_fea_mode - tbl_fea_mode |
| 4593 |
short tbl_fea_mode - tbl_fea_mode |
| 4594 |
short tbl_fea_mode - tbl_fea_mode |
| 4595 |
short tbl_fea_mode - tbl_fea_mode |
| 4596 |
short tbl_fea_mode - tbl_fea_mode |
| 4597 |
|
| 4598 |
short tbl_fea_mode - tbl_fea_mode |
| 4599 |
short tbl_fea_mode - tbl_fea_mode |
| 4600 |
short tbl_fea_mode - tbl_fea_mode |
| 4601 |
short tbl_fea_mode - tbl_fea_mode |
| 4602 |
short tbl_fea_mode - tbl_fea_mode |
| 4603 |
short tbl_fea_mode - tbl_fea_mode |
| 4604 |
short tbl_fea_mode - tbl_fea_mode |
| 4605 |
short tbl_fea_mode - tbl_fea_mode |
| 4606 |
|
| 4607 |
short faddr_ind_a0 - tbl_fea_mode |
| 4608 |
short faddr_ind_a1 - tbl_fea_mode |
| 4609 |
short faddr_ind_a2 - tbl_fea_mode |
| 4610 |
short faddr_ind_a3 - tbl_fea_mode |
| 4611 |
short faddr_ind_a4 - tbl_fea_mode |
| 4612 |
short faddr_ind_a5 - tbl_fea_mode |
| 4613 |
short faddr_ind_a6 - tbl_fea_mode |
| 4614 |
short faddr_ind_a7 - tbl_fea_mode |
| 4615 |
|
| 4616 |
short faddr_ind_p_a0 - tbl_fea_mode |
| 4617 |
short faddr_ind_p_a1 - tbl_fea_mode |
| 4618 |
short faddr_ind_p_a2 - tbl_fea_mode |
| 4619 |
short faddr_ind_p_a3 - tbl_fea_mode |
| 4620 |
short faddr_ind_p_a4 - tbl_fea_mode |
| 4621 |
short faddr_ind_p_a5 - tbl_fea_mode |
| 4622 |
short faddr_ind_p_a6 - tbl_fea_mode |
| 4623 |
short faddr_ind_p_a7 - tbl_fea_mode |
| 4624 |
|
| 4625 |
short faddr_ind_m_a0 - tbl_fea_mode |
| 4626 |
short faddr_ind_m_a1 - tbl_fea_mode |
| 4627 |
short faddr_ind_m_a2 - tbl_fea_mode |
| 4628 |
short faddr_ind_m_a3 - tbl_fea_mode |
| 4629 |
short faddr_ind_m_a4 - tbl_fea_mode |
| 4630 |
short faddr_ind_m_a5 - tbl_fea_mode |
| 4631 |
short faddr_ind_m_a6 - tbl_fea_mode |
| 4632 |
short faddr_ind_m_a7 - tbl_fea_mode |
| 4633 |
|
| 4634 |
short faddr_ind_disp_a0 - tbl_fea_mode |
| 4635 |
short faddr_ind_disp_a1 - tbl_fea_mode |
| 4636 |
short faddr_ind_disp_a2 - tbl_fea_mode |
| 4637 |
short faddr_ind_disp_a3 - tbl_fea_mode |
| 4638 |
short faddr_ind_disp_a4 - tbl_fea_mode |
| 4639 |
short faddr_ind_disp_a5 - tbl_fea_mode |
| 4640 |
short faddr_ind_disp_a6 - tbl_fea_mode |
| 4641 |
short faddr_ind_disp_a7 - tbl_fea_mode |
| 4642 |
|
| 4643 |
short faddr_ind_ext - tbl_fea_mode |
| 4644 |
short faddr_ind_ext - tbl_fea_mode |
| 4645 |
short faddr_ind_ext - tbl_fea_mode |
| 4646 |
short faddr_ind_ext - tbl_fea_mode |
| 4647 |
short faddr_ind_ext - tbl_fea_mode |
| 4648 |
short faddr_ind_ext - tbl_fea_mode |
| 4649 |
short faddr_ind_ext - tbl_fea_mode |
| 4650 |
short faddr_ind_ext - tbl_fea_mode |
| 4651 |
|
| 4652 |
short fabs_short - tbl_fea_mode |
| 4653 |
short fabs_long - tbl_fea_mode |
| 4654 |
short fpc_ind - tbl_fea_mode |
| 4655 |
short fpc_ind_ext - tbl_fea_mode |
| 4656 |
short tbl_fea_mode - tbl_fea_mode |
| 4657 |
short tbl_fea_mode - tbl_fea_mode |
| 4658 |
short tbl_fea_mode - tbl_fea_mode |
| 4659 |
short tbl_fea_mode - tbl_fea_mode |
| 4660 |
|
| 4661 |
################################### |
| 4662 |
# Address register indirect: (An) # |
| 4663 |
################################### |
| 4664 |
faddr_ind_a0: |
| 4665 |
mov.l EXC_DREGS+0x8(%a6),%a0 # Get current a0 |
| 4666 |
rts |
| 4667 |
|
| 4668 |
faddr_ind_a1: |
| 4669 |
mov.l EXC_DREGS+0xc(%a6),%a0 # Get current a1 |
| 4670 |
rts |
| 4671 |
|
| 4672 |
faddr_ind_a2: |
| 4673 |
mov.l %a2,%a0 # Get current a2 |
| 4674 |
rts |
| 4675 |
|
| 4676 |
faddr_ind_a3: |
| 4677 |
mov.l %a3,%a0 # Get current a3 |
| 4678 |
rts |
| 4679 |
|
| 4680 |
faddr_ind_a4: |
| 4681 |
mov.l %a4,%a0 # Get current a4 |
| 4682 |
rts |
| 4683 |
|
| 4684 |
faddr_ind_a5: |
| 4685 |
mov.l %a5,%a0 # Get current a5 |
| 4686 |
rts |
| 4687 |
|
| 4688 |
faddr_ind_a6: |
| 4689 |
mov.l (%a6),%a0 # Get current a6 |
| 4690 |
rts |
| 4691 |
|
| 4692 |
faddr_ind_a7: |
| 4693 |
mov.l EXC_A7(%a6),%a0 # Get current a7 |
| 4694 |
rts |
| 4695 |
|
| 4696 |
##################################################### |
| 4697 |
# Address register indirect w/ postincrement: (An)+ # |
| 4698 |
##################################################### |
| 4699 |
faddr_ind_p_a0: |
| 4700 |
mov.l EXC_DREGS+0x8(%a6),%d0 # Get current a0 |
| 4701 |
mov.l %d0,%d1 |
| 4702 |
add.l %a0,%d1 # Increment |
| 4703 |
mov.l %d1,EXC_DREGS+0x8(%a6) # Save incr value |
| 4704 |
mov.l %d0,%a0 |
| 4705 |
rts |
| 4706 |
|
| 4707 |
faddr_ind_p_a1: |
| 4708 |
mov.l EXC_DREGS+0xc(%a6),%d0 # Get current a1 |
| 4709 |
mov.l %d0,%d1 |
| 4710 |
add.l %a0,%d1 # Increment |
| 4711 |
mov.l %d1,EXC_DREGS+0xc(%a6) # Save incr value |
| 4712 |
mov.l %d0,%a0 |
| 4713 |
rts |
| 4714 |
|
| 4715 |
faddr_ind_p_a2: |
| 4716 |
mov.l %a2,%d0 # Get current a2 |
| 4717 |
mov.l %d0,%d1 |
| 4718 |
add.l %a0,%d1 # Increment |
| 4719 |
mov.l %d1,%a2 # Save incr value |
| 4720 |
mov.l %d0,%a0 |
| 4721 |
rts |
| 4722 |
|
| 4723 |
faddr_ind_p_a3: |
| 4724 |
mov.l %a3,%d0 # Get current a3 |
| 4725 |
mov.l %d0,%d1 |
| 4726 |
add.l %a0,%d1 # Increment |
| 4727 |
mov.l %d1,%a3 # Save incr value |
| 4728 |
mov.l %d0,%a0 |
| 4729 |
rts |
| 4730 |
|
| 4731 |
faddr_ind_p_a4: |
| 4732 |
mov.l %a4,%d0 # Get current a4 |
| 4733 |
mov.l %d0,%d1 |
| 4734 |
add.l %a0,%d1 # Increment |
| 4735 |
mov.l %d1,%a4 # Save incr value |
| 4736 |
mov.l %d0,%a0 |
| 4737 |
rts |
| 4738 |
|
| 4739 |
faddr_ind_p_a5: |
| 4740 |
mov.l %a5,%d0 # Get current a5 |
| 4741 |
mov.l %d0,%d1 |
| 4742 |
add.l %a0,%d1 # Increment |
| 4743 |
mov.l %d1,%a5 # Save incr value |
| 4744 |
mov.l %d0,%a0 |
| 4745 |
rts |
| 4746 |
|
| 4747 |
faddr_ind_p_a6: |
| 4748 |
mov.l (%a6),%d0 # Get current a6 |
| 4749 |
mov.l %d0,%d1 |
| 4750 |
add.l %a0,%d1 # Increment |
| 4751 |
mov.l %d1,(%a6) # Save incr value |
| 4752 |
mov.l %d0,%a0 |
| 4753 |
rts |
| 4754 |
|
| 4755 |
faddr_ind_p_a7: |
| 4756 |
mov.b &mia7_flg,SPCOND_FLG(%a6) # set "special case" flag |
| 4757 |
|
| 4758 |
mov.l EXC_A7(%a6),%d0 # Get current a7 |
| 4759 |
mov.l %d0,%d1 |
| 4760 |
add.l %a0,%d1 # Increment |
| 4761 |
mov.l %d1,EXC_A7(%a6) # Save incr value |
| 4762 |
mov.l %d0,%a0 |
| 4763 |
rts |
| 4764 |
|
| 4765 |
#################################################### |
| 4766 |
# Address register indirect w/ predecrement: -(An) # |
| 4767 |
#################################################### |
| 4768 |
faddr_ind_m_a0: |
| 4769 |
mov.l EXC_DREGS+0x8(%a6),%d0 # Get current a0 |
| 4770 |
sub.l %a0,%d0 # Decrement |
| 4771 |
mov.l %d0,EXC_DREGS+0x8(%a6) # Save decr value |
| 4772 |
mov.l %d0,%a0 |
| 4773 |
rts |
| 4774 |
|
| 4775 |
faddr_ind_m_a1: |
| 4776 |
mov.l EXC_DREGS+0xc(%a6),%d0 # Get current a1 |
| 4777 |
sub.l %a0,%d0 # Decrement |
| 4778 |
mov.l %d0,EXC_DREGS+0xc(%a6) # Save decr value |
| 4779 |
mov.l %d0,%a0 |
| 4780 |
rts |
| 4781 |
|
| 4782 |
faddr_ind_m_a2: |
| 4783 |
mov.l %a2,%d0 # Get current a2 |
| 4784 |
sub.l %a0,%d0 # Decrement |
| 4785 |
mov.l %d0,%a2 # Save decr value |
| 4786 |
mov.l %d0,%a0 |
| 4787 |
rts |
| 4788 |
|
| 4789 |
faddr_ind_m_a3: |
| 4790 |
mov.l %a3,%d0 # Get current a3 |
| 4791 |
sub.l %a0,%d0 # Decrement |
| 4792 |
mov.l %d0,%a3 # Save decr value |
| 4793 |
mov.l %d0,%a0 |
| 4794 |
rts |
| 4795 |
|
| 4796 |
faddr_ind_m_a4: |
| 4797 |
mov.l %a4,%d0 # Get current a4 |
| 4798 |
sub.l %a0,%d0 # Decrement |
| 4799 |
mov.l %d0,%a4 # Save decr value |
| 4800 |
mov.l %d0,%a0 |
| 4801 |
rts |
| 4802 |
|
| 4803 |
faddr_ind_m_a5: |
| 4804 |
mov.l %a5,%d0 # Get current a5 |
| 4805 |
sub.l %a0,%d0 # Decrement |
| 4806 |
mov.l %d0,%a5 # Save decr value |
| 4807 |
mov.l %d0,%a0 |
| 4808 |
rts |
| 4809 |
|
| 4810 |
faddr_ind_m_a6: |
| 4811 |
mov.l (%a6),%d0 # Get current a6 |
| 4812 |
sub.l %a0,%d0 # Decrement |
| 4813 |
mov.l %d0,(%a6) # Save decr value |
| 4814 |
mov.l %d0,%a0 |
| 4815 |
rts |
| 4816 |
|
| 4817 |
faddr_ind_m_a7: |
| 4818 |
mov.b &mda7_flg,SPCOND_FLG(%a6) # set "special case" flag |
| 4819 |
|
| 4820 |
mov.l EXC_A7(%a6),%d0 # Get current a7 |
| 4821 |
sub.l %a0,%d0 # Decrement |
| 4822 |
mov.l %d0,EXC_A7(%a6) # Save decr value |
| 4823 |
mov.l %d0,%a0 |
| 4824 |
rts |
| 4825 |
|
| 4826 |
######################################################## |
| 4827 |
# Address register indirect w/ displacement: (d16, An) # |
| 4828 |
######################################################## |
| 4829 |
faddr_ind_disp_a0: |
| 4830 |
mov.l EXC_EXTWPTR(%a6),%a0 # fetch instruction addr |
| 4831 |
addq.l &0x2,EXC_EXTWPTR(%a6) # incr instruction ptr |
| 4832 |
bsr.l _imem_read_word |
| 4833 |
|
| 4834 |
tst.l %d1 # did ifetch fail? |
| 4835 |
bne.l iea_iacc # yes |
| 4836 |
|
| 4837 |
mov.w %d0,%a0 # sign extend displacement |
| 4838 |
|
| 4839 |
add.l EXC_DREGS+0x8(%a6),%a0 # a0 + d16 |
| 4840 |
rts |
| 4841 |
|
| 4842 |
faddr_ind_disp_a1: |
| 4843 |
mov.l EXC_EXTWPTR(%a6),%a0 # fetch instruction addr |
| 4844 |
addq.l &0x2,EXC_EXTWPTR(%a6) # incr instruction ptr |
| 4845 |
bsr.l _imem_read_word |
| 4846 |
|
| 4847 |
tst.l %d1 # did ifetch fail? |
| 4848 |
bne.l iea_iacc # yes |
| 4849 |
|
| 4850 |
mov.w %d0,%a0 # sign extend displacement |
| 4851 |
|
| 4852 |
add.l EXC_DREGS+0xc(%a6),%a0 # a1 + d16 |
| 4853 |
rts |
| 4854 |
|
| 4855 |
faddr_ind_disp_a2: |
| 4856 |
mov.l EXC_EXTWPTR(%a6),%a0 # fetch instruction addr |
| 4857 |
addq.l &0x2,EXC_EXTWPTR(%a6) # incr instruction ptr |
| 4858 |
bsr.l _imem_read_word |
| 4859 |
|
| 4860 |
tst.l %d1 # did ifetch fail? |
| 4861 |
bne.l iea_iacc # yes |
| 4862 |
|
| 4863 |
mov.w %d0,%a0 # sign extend displacement |
| 4864 |
|
| 4865 |
add.l %a2,%a0 # a2 + d16 |
| 4866 |
rts |
| 4867 |
|
| 4868 |
faddr_ind_disp_a3: |
| 4869 |
mov.l EXC_EXTWPTR(%a6),%a0 # fetch instruction addr |
| 4870 |
addq.l &0x2,EXC_EXTWPTR(%a6) # incr instruction ptr |
| 4871 |
bsr.l _imem_read_word |
| 4872 |
|
| 4873 |
tst.l %d1 # did ifetch fail? |
| 4874 |
bne.l iea_iacc # yes |
| 4875 |
|
| 4876 |
mov.w %d0,%a0 # sign extend displacement |
| 4877 |
|
| 4878 |
add.l %a3,%a0 # a3 + d16 |
| 4879 |
rts |
| 4880 |
|
| 4881 |
faddr_ind_disp_a4: |
| 4882 |
mov.l EXC_EXTWPTR(%a6),%a0 # fetch instruction addr |
| 4883 |
addq.l &0x2,EXC_EXTWPTR(%a6) # incr instruction ptr |
| 4884 |
bsr.l _imem_read_word |
| 4885 |
|
| 4886 |
tst.l %d1 # did ifetch fail? |
| 4887 |
bne.l iea_iacc # yes |
| 4888 |
|
| 4889 |
mov.w %d0,%a0 # sign extend displacement |
| 4890 |
|
| 4891 |
add.l %a4,%a0 # a4 + d16 |
| 4892 |
rts |
| 4893 |
|
| 4894 |
faddr_ind_disp_a5: |
| 4895 |
mov.l EXC_EXTWPTR(%a6),%a0 # fetch instruction addr |
| 4896 |
addq.l &0x2,EXC_EXTWPTR(%a6) # incr instruction ptr |
| 4897 |
bsr.l _imem_read_word |
| 4898 |
|
| 4899 |
tst.l %d1 # did ifetch fail? |
| 4900 |
bne.l iea_iacc # yes |
| 4901 |
|
| 4902 |
mov.w %d0,%a0 # sign extend displacement |
| 4903 |
|
| 4904 |
add.l %a5,%a0 # a5 + d16 |
| 4905 |
rts |
| 4906 |
|
| 4907 |
faddr_ind_disp_a6: |
| 4908 |
mov.l EXC_EXTWPTR(%a6),%a0 # fetch instruction addr |
| 4909 |
addq.l &0x2,EXC_EXTWPTR(%a6) # incr instruction ptr |
| 4910 |
bsr.l _imem_read_word |
| 4911 |
|
| 4912 |
tst.l %d1 # did ifetch fail? |
| 4913 |
bne.l iea_iacc # yes |
| 4914 |
|
| 4915 |
mov.w %d0,%a0 # sign extend displacement |
| 4916 |
|
| 4917 |
add.l (%a6),%a0 # a6 + d16 |
| 4918 |
rts |
| 4919 |
|
| 4920 |
faddr_ind_disp_a7: |
| 4921 |
mov.l EXC_EXTWPTR(%a6),%a0 # fetch instruction addr |
| 4922 |
addq.l &0x2,EXC_EXTWPTR(%a6) # incr instruction ptr |
| 4923 |
bsr.l _imem_read_word |
| 4924 |
|
| 4925 |
tst.l %d1 # did ifetch fail? |
| 4926 |
bne.l iea_iacc # yes |
| 4927 |
|
| 4928 |
mov.w %d0,%a0 # sign extend displacement |
| 4929 |
|
| 4930 |
add.l EXC_A7(%a6),%a0 # a7 + d16 |
| 4931 |
rts |
| 4932 |
|
| 4933 |
######################################################################## |
| 4934 |
# Address register indirect w/ index(8-bit displacement): (d8, An, Xn) # |
| 4935 |
# " " " w/ " (base displacement): (bd, An, Xn) # |
| 4936 |
# Memory indirect postindexed: ([bd, An], Xn, od) # |
| 4937 |
# Memory indirect preindexed: ([bd, An, Xn], od) # |
| 4938 |
######################################################################## |
| 4939 |
faddr_ind_ext: |
| 4940 |
addq.l &0x8,%d1 |
| 4941 |
bsr.l fetch_dreg # fetch base areg |
| 4942 |
mov.l %d0,-(%sp) |
| 4943 |
|
| 4944 |
mov.l EXC_EXTWPTR(%a6),%a0 # fetch instruction addr |
| 4945 |
addq.l &0x2,EXC_EXTWPTR(%a6) # incr instruction ptr |
| 4946 |
bsr.l _imem_read_word # fetch extword in d0 |
| 4947 |
|
| 4948 |
tst.l %d1 # did ifetch fail? |
| 4949 |
bne.l iea_iacc # yes |
| 4950 |
|
| 4951 |
mov.l (%sp)+,%a0 |
| 4952 |
|
| 4953 |
btst &0x8,%d0 |
| 4954 |
bne.w fcalc_mem_ind |
| 4955 |
|
| 4956 |
mov.l %d0,L_SCR1(%a6) # hold opword |
| 4957 |
|
| 4958 |
mov.l %d0,%d1 |
| 4959 |
rol.w &0x4,%d1 |
| 4960 |
andi.w &0xf,%d1 # extract index regno |
| 4961 |
|
| 4962 |
# count on fetch_dreg() not to alter a0... |
| 4963 |
bsr.l fetch_dreg # fetch index |
| 4964 |
|
| 4965 |
mov.l %d2,-(%sp) # save d2 |
| 4966 |
mov.l L_SCR1(%a6),%d2 # fetch opword |
| 4967 |
|
| 4968 |
btst &0xb,%d2 # is it word or long? |
| 4969 |
bne.b faii8_long |
| 4970 |
ext.l %d0 # sign extend word index |
| 4971 |
faii8_long: |
| 4972 |
mov.l %d2,%d1 |
| 4973 |
rol.w &0x7,%d1 |
| 4974 |
andi.l &0x3,%d1 # extract scale value |
| 4975 |
|
| 4976 |
lsl.l %d1,%d0 # shift index by scale |
| 4977 |
|
| 4978 |
extb.l %d2 # sign extend displacement |
| 4979 |
add.l %d2,%d0 # index + disp |
| 4980 |
add.l %d0,%a0 # An + (index + disp) |
| 4981 |
|
| 4982 |
mov.l (%sp)+,%d2 # restore old d2 |
| 4983 |
rts |
| 4984 |
|
| 4985 |
########################### |
| 4986 |
# Absolute short: (XXX).W # |
| 4987 |
########################### |
| 4988 |
fabs_short: |
| 4989 |
mov.l EXC_EXTWPTR(%a6),%a0 # fetch instruction addr |
| 4990 |
addq.l &0x2,EXC_EXTWPTR(%a6) # incr instruction ptr |
| 4991 |
bsr.l _imem_read_word # fetch short address |
| 4992 |
|
| 4993 |
tst.l %d1 # did ifetch fail? |
| 4994 |
bne.l iea_iacc # yes |
| 4995 |
|
| 4996 |
mov.w %d0,%a0 # return <ea> in a0 |
| 4997 |
rts |
| 4998 |
|
| 4999 |
########################## |
| 5000 |
# Absolute long: (XXX).L # |
| 5001 |
########################## |
| 5002 |
fabs_long: |
| 5003 |
mov.l EXC_EXTWPTR(%a6),%a0 # fetch instruction addr |
| 5004 |
addq.l &0x4,EXC_EXTWPTR(%a6) # incr instruction ptr |
| 5005 |
bsr.l _imem_read_long # fetch long address |
| 5006 |
|
| 5007 |
tst.l %d1 # did ifetch fail? |
| 5008 |
bne.l iea_iacc # yes |
| 5009 |
|
| 5010 |
mov.l %d0,%a0 # return <ea> in a0 |
| 5011 |
rts |
| 5012 |
|
| 5013 |
####################################################### |
| 5014 |
# Program counter indirect w/ displacement: (d16, PC) # |
| 5015 |
####################################################### |
| 5016 |
fpc_ind: |
| 5017 |
mov.l EXC_EXTWPTR(%a6),%a0 # fetch instruction addr |
| 5018 |
addq.l &0x2,EXC_EXTWPTR(%a6) # incr instruction ptr |
| 5019 |
bsr.l _imem_read_word # fetch word displacement |
| 5020 |
|
| 5021 |
tst.l %d1 # did ifetch fail? |
| 5022 |
bne.l iea_iacc # yes |
| 5023 |
|
| 5024 |
mov.w %d0,%a0 # sign extend displacement |
| 5025 |
|
| 5026 |
add.l EXC_EXTWPTR(%a6),%a0 # pc + d16 |
| 5027 |
|
| 5028 |
# _imem_read_word() increased the extwptr by 2. need to adjust here. |
| 5029 |
subq.l &0x2,%a0 # adjust <ea> |
| 5030 |
rts |
| 5031 |
|
| 5032 |
########################################################## |
| 5033 |
# PC indirect w/ index(8-bit displacement): (d8, PC, An) # |
| 5034 |
# " " w/ " (base displacement): (bd, PC, An) # |
| 5035 |
# PC memory indirect postindexed: ([bd, PC], Xn, od) # |
| 5036 |
# PC memory indirect preindexed: ([bd, PC, Xn], od) # |
| 5037 |
########################################################## |
| 5038 |
fpc_ind_ext: |
| 5039 |
mov.l EXC_EXTWPTR(%a6),%a0 # fetch instruction addr |
| 5040 |
addq.l &0x2,EXC_EXTWPTR(%a6) # incr instruction ptr |
| 5041 |
bsr.l _imem_read_word # fetch ext word |
| 5042 |
|
| 5043 |
tst.l %d1 # did ifetch fail? |
| 5044 |
bne.l iea_iacc # yes |
| 5045 |
|
| 5046 |
mov.l EXC_EXTWPTR(%a6),%a0 # put base in a0 |
| 5047 |
subq.l &0x2,%a0 # adjust base |
| 5048 |
|
| 5049 |
btst &0x8,%d0 # is disp only 8 bits? |
| 5050 |
bne.w fcalc_mem_ind # calc memory indirect |
| 5051 |
|
| 5052 |
mov.l %d0,L_SCR1(%a6) # store opword |
| 5053 |
|
| 5054 |
mov.l %d0,%d1 # make extword copy |
| 5055 |
rol.w &0x4,%d1 # rotate reg num into place |
| 5056 |
andi.w &0xf,%d1 # extract register number |
| 5057 |
|
| 5058 |
# count on fetch_dreg() not to alter a0... |
| 5059 |
bsr.l fetch_dreg # fetch index |
| 5060 |
|
| 5061 |
mov.l %d2,-(%sp) # save d2 |
| 5062 |
mov.l L_SCR1(%a6),%d2 # fetch opword |
| 5063 |
|
| 5064 |
btst &0xb,%d2 # is index word or long? |
| 5065 |
bne.b fpii8_long # long |
| 5066 |
ext.l %d0 # sign extend word index |
| 5067 |
fpii8_long: |
| 5068 |
mov.l %d2,%d1 |
| 5069 |
rol.w &0x7,%d1 # rotate scale value into place |
| 5070 |
andi.l &0x3,%d1 # extract scale value |
| 5071 |
|
| 5072 |
lsl.l %d1,%d0 # shift index by scale |
| 5073 |
|
| 5074 |
extb.l %d2 # sign extend displacement |
| 5075 |
add.l %d2,%d0 # disp + index |
| 5076 |
add.l %d0,%a0 # An + (index + disp) |
| 5077 |
|
| 5078 |
mov.l (%sp)+,%d2 # restore temp register |
| 5079 |
rts |
| 5080 |
|
| 5081 |
# d2 = index |
| 5082 |
# d3 = base |
| 5083 |
# d4 = od |
| 5084 |
# d5 = extword |
| 5085 |
fcalc_mem_ind: |
| 5086 |
btst &0x6,%d0 # is the index suppressed? |
| 5087 |
beq.b fcalc_index |
| 5088 |
|
| 5089 |
movm.l &0x3c00,-(%sp) # save d2-d5 |
| 5090 |
|
| 5091 |
mov.l %d0,%d5 # put extword in d5 |
| 5092 |
mov.l %a0,%d3 # put base in d3 |
| 5093 |
|
| 5094 |
clr.l %d2 # yes, so index = 0 |
| 5095 |
bra.b fbase_supp_ck |
| 5096 |
|
| 5097 |
# index: |
| 5098 |
fcalc_index: |
| 5099 |
mov.l %d0,L_SCR1(%a6) # save d0 (opword) |
| 5100 |
bfextu %d0{&16:&4},%d1 # fetch dreg index |
| 5101 |
bsr.l fetch_dreg |
| 5102 |
|
| 5103 |
movm.l &0x3c00,-(%sp) # save d2-d5 |
| 5104 |
mov.l %d0,%d2 # put index in d2 |
| 5105 |
mov.l L_SCR1(%a6),%d5 |
| 5106 |
mov.l %a0,%d3 |
| 5107 |
|
| 5108 |
btst &0xb,%d5 # is index word or long? |
| 5109 |
bne.b fno_ext |
| 5110 |
ext.l %d2 |
| 5111 |
|
| 5112 |
fno_ext: |
| 5113 |
bfextu %d5{&21:&2},%d0 |
| 5114 |
lsl.l %d0,%d2 |
| 5115 |
|
| 5116 |
# base address (passed as parameter in d3): |
| 5117 |
# we clear the value here if it should actually be suppressed. |
| 5118 |
fbase_supp_ck: |
| 5119 |
btst &0x7,%d5 # is the bd suppressed? |
| 5120 |
beq.b fno_base_sup |
| 5121 |
clr.l %d3 |
| 5122 |
|
| 5123 |
# base displacement: |
| 5124 |
fno_base_sup: |
| 5125 |
bfextu %d5{&26:&2},%d0 # get bd size |
| 5126 |
# beq.l fmovm_error # if (size == 0) it's reserved |
| 5127 |
|
| 5128 |
cmpi.b %d0,&0x2 |
| 5129 |
blt.b fno_bd |
| 5130 |
beq.b fget_word_bd |
| 5131 |
|
| 5132 |
mov.l EXC_EXTWPTR(%a6),%a0 # fetch instruction addr |
| 5133 |
addq.l &0x4,EXC_EXTWPTR(%a6) # incr instruction ptr |
| 5134 |
bsr.l _imem_read_long |
| 5135 |
|
| 5136 |
tst.l %d1 # did ifetch fail? |
| 5137 |
bne.l fcea_iacc # yes |
| 5138 |
|
| 5139 |
bra.b fchk_ind |
| 5140 |
|
| 5141 |
fget_word_bd: |
| 5142 |
mov.l EXC_EXTWPTR(%a6),%a0 # fetch instruction addr |
| 5143 |
addq.l &0x2,EXC_EXTWPTR(%a6) # incr instruction ptr |
| 5144 |
bsr.l _imem_read_word |
| 5145 |
|
| 5146 |
tst.l %d1 # did ifetch fail? |
| 5147 |
bne.l fcea_iacc # yes |
| 5148 |
|
| 5149 |
ext.l %d0 # sign extend bd |
| 5150 |
|
| 5151 |
fchk_ind: |
| 5152 |
add.l %d0,%d3 # base += bd |
| 5153 |
|
| 5154 |
# outer displacement: |
| 5155 |
fno_bd: |
| 5156 |
bfextu %d5{&30:&2},%d0 # is od suppressed? |
| 5157 |
beq.w faii_bd |
| 5158 |
|
| 5159 |
cmpi.b %d0,&0x2 |
| 5160 |
blt.b fnull_od |
| 5161 |
beq.b fword_od |
| 5162 |
|
| 5163 |
mov.l EXC_EXTWPTR(%a6),%a0 # fetch instruction addr |
| 5164 |
addq.l &0x4,EXC_EXTWPTR(%a6) # incr instruction ptr |
| 5165 |
bsr.l _imem_read_long |
| 5166 |
|
| 5167 |
tst.l %d1 # did ifetch fail? |
| 5168 |
bne.l fcea_iacc # yes |
| 5169 |
|
| 5170 |
bra.b fadd_them |
| 5171 |
|
| 5172 |
fword_od: |
| 5173 |
mov.l EXC_EXTWPTR(%a6),%a0 # fetch instruction addr |
| 5174 |
addq.l &0x2,EXC_EXTWPTR(%a6) # incr instruction ptr |
| 5175 |
bsr.l _imem_read_word |
| 5176 |
|
| 5177 |
tst.l %d1 # did ifetch fail? |
| 5178 |
bne.l fcea_iacc # yes |
| 5179 |
|
| 5180 |
ext.l %d0 # sign extend od |
| 5181 |
bra.b fadd_them |
| 5182 |
|
| 5183 |
fnull_od: |
| 5184 |
clr.l %d0 |
| 5185 |
|
| 5186 |
fadd_them: |
| 5187 |
mov.l %d0,%d4 |
| 5188 |
|
| 5189 |
btst &0x2,%d5 # pre or post indexing? |
| 5190 |
beq.b fpre_indexed |
| 5191 |
|
| 5192 |
mov.l %d3,%a0 |
| 5193 |
bsr.l _dmem_read_long |
| 5194 |
|
| 5195 |
tst.l %d1 # did dfetch fail? |
| 5196 |
bne.w fcea_err # yes |
| 5197 |
|
| 5198 |
add.l %d2,%d0 # <ea> += index |
| 5199 |
add.l %d4,%d0 # <ea> += od |
| 5200 |
bra.b fdone_ea |
| 5201 |
|
| 5202 |
fpre_indexed: |
| 5203 |
add.l %d2,%d3 # preindexing |
| 5204 |
mov.l %d3,%a0 |
| 5205 |
bsr.l _dmem_read_long |
| 5206 |
|
| 5207 |
tst.l %d1 # did dfetch fail? |
| 5208 |
bne.w fcea_err # yes |
| 5209 |
|
| 5210 |
add.l %d4,%d0 # ea += od |
| 5211 |
bra.b fdone_ea |
| 5212 |
|
| 5213 |
faii_bd: |
| 5214 |
add.l %d2,%d3 # ea = (base + bd) + index |
| 5215 |
mov.l %d3,%d0 |
| 5216 |
fdone_ea: |
| 5217 |
mov.l %d0,%a0 |
| 5218 |
|
| 5219 |
movm.l (%sp)+,&0x003c # restore d2-d5 |
| 5220 |
rts |
| 5221 |
|
| 5222 |
######################################################### |
| 5223 |
fcea_err: |
| 5224 |
mov.l %d3,%a0 |
| 5225 |
|
| 5226 |
movm.l (%sp)+,&0x003c # restore d2-d5 |
| 5227 |
mov.w &0x0101,%d0 |
| 5228 |
bra.l iea_dacc |
| 5229 |
|
| 5230 |
fcea_iacc: |
| 5231 |
movm.l (%sp)+,&0x003c # restore d2-d5 |
| 5232 |
bra.l iea_iacc |
| 5233 |
|
| 5234 |
fmovm_out_err: |
| 5235 |
bsr.l restore |
| 5236 |
mov.w &0x00e1,%d0 |
| 5237 |
bra.b fmovm_err |
| 5238 |
|
| 5239 |
fmovm_in_err: |
| 5240 |
bsr.l restore |
| 5241 |
mov.w &0x0161,%d0 |
| 5242 |
|
| 5243 |
fmovm_err: |
| 5244 |
mov.l L_SCR1(%a6),%a0 |
| 5245 |
bra.l iea_dacc |
| 5246 |
|
| 5247 |
######################################################################### |
| 5248 |
# XDEF **************************************************************** # |
| 5249 |
# fmovm_ctrl(): emulate fmovm.l of control registers instr # |
| 5250 |
# # |
| 5251 |
# XREF **************************************************************** # |
| 5252 |
# _imem_read_long() - read longword from memory # |
| 5253 |
# iea_iacc() - _imem_read_long() failed; error recovery # |
| 5254 |
# # |
| 5255 |
# INPUT *************************************************************** # |
| 5256 |
# None # |
| 5257 |
# # |
| 5258 |
# OUTPUT ************************************************************** # |
| 5259 |
# If _imem_read_long() doesn't fail: # |
| 5260 |
# USER_FPCR(a6) = new FPCR value # |
| 5261 |
# USER_FPSR(a6) = new FPSR value # |
| 5262 |
# USER_FPIAR(a6) = new FPIAR value # |
| 5263 |
# # |
| 5264 |
# ALGORITHM *********************************************************** # |
| 5265 |
# Decode the instruction type by looking at the extension word # |
| 5266 |
# in order to see how many control registers to fetch from memory. # |
| 5267 |
# Fetch them using _imem_read_long(). If this fetch fails, exit through # |
| 5268 |
# the special access error exit handler iea_iacc(). # |
| 5269 |
# # |
| 5270 |
# Instruction word decoding: # |
| 5271 |
# # |
| 5272 |
# fmovem.l #<data>, {FPIAR&|FPCR&|FPSR} # |
| 5273 |
# # |
| 5274 |
# WORD1 WORD2 # |
| 5275 |
# 1111 0010 00 111100 100$ $$00 0000 0000 # |
| 5276 |
# # |
| 5277 |
# $$$ (100): FPCR # |
| 5278 |
# (010): FPSR # |
| 5279 |
# (001): FPIAR # |
| 5280 |
# (000): FPIAR # |
| 5281 |
# # |
| 5282 |
######################################################################### |
| 5283 |
|
| 5284 |
global fmovm_ctrl |
| 5285 |
fmovm_ctrl: |
| 5286 |
mov.b EXC_EXTWORD(%a6),%d0 # fetch reg select bits |
| 5287 |
cmpi.b %d0,&0x9c # fpcr & fpsr & fpiar ? |
| 5288 |
beq.w fctrl_in_7 # yes |
| 5289 |
cmpi.b %d0,&0x98 # fpcr & fpsr ? |
| 5290 |
beq.w fctrl_in_6 # yes |
| 5291 |
cmpi.b %d0,&0x94 # fpcr & fpiar ? |
| 5292 |
beq.b fctrl_in_5 # yes |
| 5293 |
|
| 5294 |
# fmovem.l #<data>, fpsr/fpiar |
| 5295 |
fctrl_in_3: |
| 5296 |
mov.l EXC_EXTWPTR(%a6),%a0 # fetch instruction addr |
| 5297 |
addq.l &0x4,EXC_EXTWPTR(%a6) # incr instruction ptr |
| 5298 |
bsr.l _imem_read_long # fetch FPSR from mem |
| 5299 |
|
| 5300 |
tst.l %d1 # did ifetch fail? |
| 5301 |
bne.l iea_iacc # yes |
| 5302 |
|
| 5303 |
mov.l %d0,USER_FPSR(%a6) # store new FPSR to stack |
| 5304 |
mov.l EXC_EXTWPTR(%a6),%a0 # fetch instruction addr |
| 5305 |
addq.l &0x4,EXC_EXTWPTR(%a6) # incr instruction ptr |
| 5306 |
bsr.l _imem_read_long # fetch FPIAR from mem |
| 5307 |
|
| 5308 |
tst.l %d1 # did ifetch fail? |
| 5309 |
bne.l iea_iacc # yes |
| 5310 |
|
| 5311 |
mov.l %d0,USER_FPIAR(%a6) # store new FPIAR to stack |
| 5312 |
rts |
| 5313 |
|
| 5314 |
# fmovem.l #<data>, fpcr/fpiar |
| 5315 |
fctrl_in_5: |
| 5316 |
mov.l EXC_EXTWPTR(%a6),%a0 # fetch instruction addr |
| 5317 |
addq.l &0x4,EXC_EXTWPTR(%a6) # incr instruction ptr |
| 5318 |
bsr.l _imem_read_long # fetch FPCR from mem |
| 5319 |
|
| 5320 |
tst.l %d1 # did ifetch fail? |
| 5321 |
bne.l iea_iacc # yes |
| 5322 |
|
| 5323 |
mov.l %d0,USER_FPCR(%a6) # store new FPCR to stack |
| 5324 |
mov.l EXC_EXTWPTR(%a6),%a0 # fetch instruction addr |
| 5325 |
addq.l &0x4,EXC_EXTWPTR(%a6) # incr instruction ptr |
| 5326 |
bsr.l _imem_read_long # fetch FPIAR from mem |
| 5327 |
|
| 5328 |
tst.l %d1 # did ifetch fail? |
| 5329 |
bne.l iea_iacc # yes |
| 5330 |
|
| 5331 |
mov.l %d0,USER_FPIAR(%a6) # store new FPIAR to stack |
| 5332 |
rts |
| 5333 |
|
| 5334 |
# fmovem.l #<data>, fpcr/fpsr |
| 5335 |
fctrl_in_6: |
| 5336 |
mov.l EXC_EXTWPTR(%a6),%a0 # fetch instruction addr |
| 5337 |
addq.l &0x4,EXC_EXTWPTR(%a6) # incr instruction ptr |
| 5338 |
bsr.l _imem_read_long # fetch FPCR from mem |
| 5339 |
|
| 5340 |
tst.l %d1 # did ifetch fail? |
| 5341 |
bne.l iea_iacc # yes |
| 5342 |
|
| 5343 |
mov.l %d0,USER_FPCR(%a6) # store new FPCR to mem |
| 5344 |
mov.l EXC_EXTWPTR(%a6),%a0 # fetch instruction addr |
| 5345 |
addq.l &0x4,EXC_EXTWPTR(%a6) # incr instruction ptr |
| 5346 |
bsr.l _imem_read_long # fetch FPSR from mem |
| 5347 |
|
| 5348 |
tst.l %d1 # did ifetch fail? |
| 5349 |
bne.l iea_iacc # yes |
| 5350 |
|
| 5351 |
mov.l %d0,USER_FPSR(%a6) # store new FPSR to mem |
| 5352 |
rts |
| 5353 |
|
| 5354 |
# fmovem.l #<data>, fpcr/fpsr/fpiar |
| 5355 |
fctrl_in_7: |
| 5356 |
mov.l EXC_EXTWPTR(%a6),%a0 # fetch instruction addr |
| 5357 |
addq.l &0x4,EXC_EXTWPTR(%a6) # incr instruction ptr |
| 5358 |
bsr.l _imem_read_long # fetch FPCR from mem |
| 5359 |
|
| 5360 |
tst.l %d1 # did ifetch fail? |
| 5361 |
bne.l iea_iacc # yes |
| 5362 |
|
| 5363 |
mov.l %d0,USER_FPCR(%a6) # store new FPCR to mem |
| 5364 |
mov.l EXC_EXTWPTR(%a6),%a0 # fetch instruction addr |
| 5365 |
addq.l &0x4,EXC_EXTWPTR(%a6) # incr instruction ptr |
| 5366 |
bsr.l _imem_read_long # fetch FPSR from mem |
| 5367 |
|
| 5368 |
tst.l %d1 # did ifetch fail? |
| 5369 |
bne.l iea_iacc # yes |
| 5370 |
|
| 5371 |
mov.l %d0,USER_FPSR(%a6) # store new FPSR to mem |
| 5372 |
mov.l EXC_EXTWPTR(%a6),%a0 # fetch instruction addr |
| 5373 |
addq.l &0x4,EXC_EXTWPTR(%a6) # incr instruction ptr |
| 5374 |
bsr.l _imem_read_long # fetch FPIAR from mem |
| 5375 |
|
| 5376 |
tst.l %d1 # did ifetch fail? |
| 5377 |
bne.l iea_iacc # yes |
| 5378 |
|
| 5379 |
mov.l %d0,USER_FPIAR(%a6) # store new FPIAR to mem |
| 5380 |
rts |
| 5381 |
|
| 5382 |
########################################################################## |
| 5383 |
|
| 5384 |
######################################################################### |
| 5385 |
# XDEF **************************************************************** # |
| 5386 |
# addsub_scaler2(): scale inputs to fadd/fsub such that no # |
| 5387 |
# OVFL/UNFL exceptions will result # |
| 5388 |
# # |
| 5389 |
# XREF **************************************************************** # |
| 5390 |
# norm() - normalize mantissa after adjusting exponent # |
| 5391 |
# # |
| 5392 |
# INPUT *************************************************************** # |
| 5393 |
# FP_SRC(a6) = fp op1(src) # |
| 5394 |
# FP_DST(a6) = fp op2(dst) # |
| 5395 |
# # |
| 5396 |
# OUTPUT ************************************************************** # |
| 5397 |
# FP_SRC(a6) = fp op1 scaled(src) # |
| 5398 |
# FP_DST(a6) = fp op2 scaled(dst) # |
| 5399 |
# d0 = scale amount # |
| 5400 |
# # |
| 5401 |
# ALGORITHM *********************************************************** # |
| 5402 |
# If the DST exponent is > the SRC exponent, set the DST exponent # |
| 5403 |
# equal to 0x3fff and scale the SRC exponent by the value that the # |
| 5404 |
# DST exponent was scaled by. If the SRC exponent is greater or equal, # |
| 5405 |
# do the opposite. Return this scale factor in d0. # |
| 5406 |
# If the two exponents differ by > the number of mantissa bits # |
| 5407 |
# plus two, then set the smallest exponent to a very small value as a # |
| 5408 |
# quick shortcut. # |
| 5409 |
# # |
| 5410 |
######################################################################### |
| 5411 |
|
| 5412 |
global addsub_scaler2 |
| 5413 |
addsub_scaler2: |
| 5414 |
mov.l SRC_HI(%a0),FP_SCR0_HI(%a6) |
| 5415 |
mov.l DST_HI(%a1),FP_SCR1_HI(%a6) |
| 5416 |
mov.l SRC_LO(%a0),FP_SCR0_LO(%a6) |
| 5417 |
mov.l DST_LO(%a1),FP_SCR1_LO(%a6) |
| 5418 |
mov.w SRC_EX(%a0),%d0 |
| 5419 |
mov.w DST_EX(%a1),%d1 |
| 5420 |
mov.w %d0,FP_SCR0_EX(%a6) |
| 5421 |
mov.w %d1,FP_SCR1_EX(%a6) |
| 5422 |
|
| 5423 |
andi.w &0x7fff,%d0 |
| 5424 |
andi.w &0x7fff,%d1 |
| 5425 |
mov.w %d0,L_SCR1(%a6) # store src exponent |
| 5426 |
mov.w %d1,2+L_SCR1(%a6) # store dst exponent |
| 5427 |
|
| 5428 |
cmp.w %d0, %d1 # is src exp >= dst exp? |
| 5429 |
bge.l src_exp_ge2 |
| 5430 |
|
| 5431 |
# dst exp is > src exp; scale dst to exp = 0x3fff |
| 5432 |
dst_exp_gt2: |
| 5433 |
bsr.l scale_to_zero_dst |
| 5434 |
mov.l %d0,-(%sp) # save scale factor |
| 5435 |
|
| 5436 |
cmpi.b STAG(%a6),&DENORM # is dst denormalized? |
| 5437 |
bne.b cmpexp12 |
| 5438 |
|
| 5439 |
lea FP_SCR0(%a6),%a0 |
| 5440 |
bsr.l norm # normalize the denorm; result is new exp |
| 5441 |
neg.w %d0 # new exp = -(shft val) |
| 5442 |
mov.w %d0,L_SCR1(%a6) # inset new exp |
| 5443 |
|
| 5444 |
cmpexp12: |
| 5445 |
mov.w 2+L_SCR1(%a6),%d0 |
| 5446 |
subi.w &mantissalen+2,%d0 # subtract mantissalen+2 from larger exp |
| 5447 |
|
| 5448 |
cmp.w %d0,L_SCR1(%a6) # is difference >= len(mantissa)+2? |
| 5449 |
bge.b quick_scale12 |
| 5450 |
|
| 5451 |
mov.w L_SCR1(%a6),%d0 |
| 5452 |
add.w 0x2(%sp),%d0 # scale src exponent by scale factor |
| 5453 |
mov.w FP_SCR0_EX(%a6),%d1 |
| 5454 |
and.w &0x8000,%d1 |
| 5455 |
or.w %d1,%d0 # concat {sgn,new exp} |
| 5456 |
mov.w %d0,FP_SCR0_EX(%a6) # insert new dst exponent |
| 5457 |
|
| 5458 |
mov.l (%sp)+,%d0 # return SCALE factor |
| 5459 |
rts |
| 5460 |
|
| 5461 |
quick_scale12: |
| 5462 |
andi.w &0x8000,FP_SCR0_EX(%a6) # zero src exponent |
| 5463 |
bset &0x0,1+FP_SCR0_EX(%a6) # set exp = 1 |
| 5464 |
|
| 5465 |
mov.l (%sp)+,%d0 # return SCALE factor |
| 5466 |
rts |
| 5467 |
|
| 5468 |
# src exp is >= dst exp; scale src to exp = 0x3fff |
| 5469 |
src_exp_ge2: |
| 5470 |
bsr.l scale_to_zero_src |
| 5471 |
mov.l %d0,-(%sp) # save scale factor |
| 5472 |
|
| 5473 |
cmpi.b DTAG(%a6),&DENORM # is dst denormalized? |
| 5474 |
bne.b cmpexp22 |
| 5475 |
lea FP_SCR1(%a6),%a0 |
| 5476 |
bsr.l norm # normalize the denorm; result is new exp |
| 5477 |
neg.w %d0 # new exp = -(shft val) |
| 5478 |
mov.w %d0,2+L_SCR1(%a6) # inset new exp |
| 5479 |
|
| 5480 |
cmpexp22: |
| 5481 |
mov.w L_SCR1(%a6),%d0 |
| 5482 |
subi.w &mantissalen+2,%d0 # subtract mantissalen+2 from larger exp |
| 5483 |
|
| 5484 |
cmp.w %d0,2+L_SCR1(%a6) # is difference >= len(mantissa)+2? |
| 5485 |
bge.b quick_scale22 |
| 5486 |
|
| 5487 |
mov.w 2+L_SCR1(%a6),%d0 |
| 5488 |
add.w 0x2(%sp),%d0 # scale dst exponent by scale factor |
| 5489 |
mov.w FP_SCR1_EX(%a6),%d1 |
| 5490 |
andi.w &0x8000,%d1 |
| 5491 |
or.w %d1,%d0 # concat {sgn,new exp} |
| 5492 |
mov.w %d0,FP_SCR1_EX(%a6) # insert new dst exponent |
| 5493 |
|
| 5494 |
mov.l (%sp)+,%d0 # return SCALE factor |
| 5495 |
rts |
| 5496 |
|
| 5497 |
quick_scale22: |
| 5498 |
andi.w &0x8000,FP_SCR1_EX(%a6) # zero dst exponent |
| 5499 |
bset &0x0,1+FP_SCR1_EX(%a6) # set exp = 1 |
| 5500 |
|
| 5501 |
mov.l (%sp)+,%d0 # return SCALE factor |
| 5502 |
rts |
| 5503 |
|
| 5504 |
########################################################################## |
| 5505 |
|
| 5506 |
######################################################################### |
| 5507 |
# XDEF **************************************************************** # |
| 5508 |
# scale_to_zero_src(): scale the exponent of extended precision # |
| 5509 |
# value at FP_SCR0(a6). # |
| 5510 |
# # |
| 5511 |
# XREF **************************************************************** # |
| 5512 |
# norm() - normalize the mantissa if the operand was a DENORM # |
| 5513 |
# # |
| 5514 |
# INPUT *************************************************************** # |
| 5515 |
# FP_SCR0(a6) = extended precision operand to be scaled # |
| 5516 |
# # |
| 5517 |
# OUTPUT ************************************************************** # |
| 5518 |
# FP_SCR0(a6) = scaled extended precision operand # |
| 5519 |
# d0 = scale value # |
| 5520 |
# # |
| 5521 |
# ALGORITHM *********************************************************** # |
| 5522 |
# Set the exponent of the input operand to 0x3fff. Save the value # |
| 5523 |
# of the difference between the original and new exponent. Then, # |
| 5524 |
# normalize the operand if it was a DENORM. Add this normalization # |
| 5525 |
# value to the previous value. Return the result. # |
| 5526 |
# # |
| 5527 |
######################################################################### |
| 5528 |
|
| 5529 |
global scale_to_zero_src |
| 5530 |
scale_to_zero_src: |
| 5531 |
mov.w FP_SCR0_EX(%a6),%d1 # extract operand's {sgn,exp} |
| 5532 |
mov.w %d1,%d0 # make a copy |
| 5533 |
|
| 5534 |
andi.l &0x7fff,%d1 # extract operand's exponent |
| 5535 |
|
| 5536 |
andi.w &0x8000,%d0 # extract operand's sgn |
| 5537 |
or.w &0x3fff,%d0 # insert new operand's exponent(=0) |
| 5538 |
|
| 5539 |
mov.w %d0,FP_SCR0_EX(%a6) # insert biased exponent |
| 5540 |
|
| 5541 |
cmpi.b STAG(%a6),&DENORM # is operand normalized? |
| 5542 |
beq.b stzs_denorm # normalize the DENORM |
| 5543 |
|
| 5544 |
stzs_norm: |
| 5545 |
mov.l &0x3fff,%d0 |
| 5546 |
sub.l %d1,%d0 # scale = BIAS + (-exp) |
| 5547 |
|
| 5548 |
rts |
| 5549 |
|
| 5550 |
stzs_denorm: |
| 5551 |
lea FP_SCR0(%a6),%a0 # pass ptr to src op |
| 5552 |
bsr.l norm # normalize denorm |
| 5553 |
neg.l %d0 # new exponent = -(shft val) |
| 5554 |
mov.l %d0,%d1 # prepare for op_norm call |
| 5555 |
bra.b stzs_norm # finish scaling |
| 5556 |
|
| 5557 |
### |
| 5558 |
|
| 5559 |
######################################################################### |
| 5560 |
# XDEF **************************************************************** # |
| 5561 |
# scale_sqrt(): scale the input operand exponent so a subsequent # |
| 5562 |
# fsqrt operation won't take an exception. # |
| 5563 |
# # |
| 5564 |
# XREF **************************************************************** # |
| 5565 |
# norm() - normalize the mantissa if the operand was a DENORM # |
| 5566 |
# # |
| 5567 |
# INPUT *************************************************************** # |
| 5568 |
# FP_SCR0(a6) = extended precision operand to be scaled # |
| 5569 |
# # |
| 5570 |
# OUTPUT ************************************************************** # |
| 5571 |
# FP_SCR0(a6) = scaled extended precision operand # |
| 5572 |
# d0 = scale value # |
| 5573 |
# # |
| 5574 |
# ALGORITHM *********************************************************** # |
| 5575 |
# If the input operand is a DENORM, normalize it. # |
| 5576 |
# If the exponent of the input operand is even, set the exponent # |
| 5577 |
# to 0x3ffe and return a scale factor of "(exp-0x3ffe)/2". If the # |
| 5578 |
# exponent of the input operand is off, set the exponent to ox3fff and # |
| 5579 |
# return a scale factor of "(exp-0x3fff)/2". # |
| 5580 |
# # |
| 5581 |
######################################################################### |
| 5582 |
|
| 5583 |
global scale_sqrt |
| 5584 |
scale_sqrt: |
| 5585 |
cmpi.b STAG(%a6),&DENORM # is operand normalized? |
| 5586 |
beq.b ss_denorm # normalize the DENORM |
| 5587 |
|
| 5588 |
mov.w FP_SCR0_EX(%a6),%d1 # extract operand's {sgn,exp} |
| 5589 |
andi.l &0x7fff,%d1 # extract operand's exponent |
| 5590 |
|
| 5591 |
andi.w &0x8000,FP_SCR0_EX(%a6) # extract operand's sgn |
| 5592 |
|
| 5593 |
btst &0x0,%d1 # is exp even or odd? |
| 5594 |
beq.b ss_norm_even |
| 5595 |
|
| 5596 |
ori.w &0x3fff,FP_SCR0_EX(%a6) # insert new operand's exponent(=0) |
| 5597 |
|
| 5598 |
mov.l &0x3fff,%d0 |
| 5599 |
sub.l %d1,%d0 # scale = BIAS + (-exp) |
| 5600 |
asr.l &0x1,%d0 # divide scale factor by 2 |
| 5601 |
rts |
| 5602 |
|
| 5603 |
ss_norm_even: |
| 5604 |
ori.w &0x3ffe,FP_SCR0_EX(%a6) # insert new operand's exponent(=0) |
| 5605 |
|
| 5606 |
mov.l &0x3ffe,%d0 |
| 5607 |
sub.l %d1,%d0 # scale = BIAS + (-exp) |
| 5608 |
asr.l &0x1,%d0 # divide scale factor by 2 |
| 5609 |
rts |
| 5610 |
|
| 5611 |
ss_denorm: |
| 5612 |
lea FP_SCR0(%a6),%a0 # pass ptr to src op |
| 5613 |
bsr.l norm # normalize denorm |
| 5614 |
|
| 5615 |
btst &0x0,%d0 # is exp even or odd? |
| 5616 |
beq.b ss_denorm_even |
| 5617 |
|
| 5618 |
ori.w &0x3fff,FP_SCR0_EX(%a6) # insert new operand's exponent(=0) |
| 5619 |
|
| 5620 |
add.l &0x3fff,%d0 |
| 5621 |
asr.l &0x1,%d0 # divide scale factor by 2 |
| 5622 |
rts |
| 5623 |
|
| 5624 |
ss_denorm_even: |
| 5625 |
ori.w &0x3ffe,FP_SCR0_EX(%a6) # insert new operand's exponent(=0) |
| 5626 |
|
| 5627 |
add.l &0x3ffe,%d0 |
| 5628 |
asr.l &0x1,%d0 # divide scale factor by 2 |
| 5629 |
rts |
| 5630 |
|
| 5631 |
### |
| 5632 |
|
| 5633 |
######################################################################### |
| 5634 |
# XDEF **************************************************************** # |
| 5635 |
# scale_to_zero_dst(): scale the exponent of extended precision # |
| 5636 |
# value at FP_SCR1(a6). # |
| 5637 |
# # |
| 5638 |
# XREF **************************************************************** # |
| 5639 |
# norm() - normalize the mantissa if the operand was a DENORM # |
| 5640 |
# # |
| 5641 |
# INPUT *************************************************************** # |
| 5642 |
# FP_SCR1(a6) = extended precision operand to be scaled # |
| 5643 |
# # |
| 5644 |
# OUTPUT ************************************************************** # |
| 5645 |
# FP_SCR1(a6) = scaled extended precision operand # |
| 5646 |
# d0 = scale value # |
| 5647 |
# # |
| 5648 |
# ALGORITHM *********************************************************** # |
| 5649 |
# Set the exponent of the input operand to 0x3fff. Save the value # |
| 5650 |
# of the difference between the original and new exponent. Then, # |
| 5651 |
# normalize the operand if it was a DENORM. Add this normalization # |
| 5652 |
# value to the previous value. Return the result. # |
| 5653 |
# # |
| 5654 |
######################################################################### |
| 5655 |
|
| 5656 |
global scale_to_zero_dst |
| 5657 |
scale_to_zero_dst: |
| 5658 |
mov.w FP_SCR1_EX(%a6),%d1 # extract operand's {sgn,exp} |
| 5659 |
mov.w %d1,%d0 # make a copy |
| 5660 |
|
| 5661 |
andi.l &0x7fff,%d1 # extract operand's exponent |
| 5662 |
|
| 5663 |
andi.w &0x8000,%d0 # extract operand's sgn |
| 5664 |
or.w &0x3fff,%d0 # insert new operand's exponent(=0) |
| 5665 |
|
| 5666 |
mov.w %d0,FP_SCR1_EX(%a6) # insert biased exponent |
| 5667 |
|
| 5668 |
cmpi.b DTAG(%a6),&DENORM # is operand normalized? |
| 5669 |
beq.b stzd_denorm # normalize the DENORM |
| 5670 |
|
| 5671 |
stzd_norm: |
| 5672 |
mov.l &0x3fff,%d0 |
| 5673 |
sub.l %d1,%d0 # scale = BIAS + (-exp) |
| 5674 |
rts |
| 5675 |
|
| 5676 |
stzd_denorm: |
| 5677 |
lea FP_SCR1(%a6),%a0 # pass ptr to dst op |
| 5678 |
bsr.l norm # normalize denorm |
| 5679 |
neg.l %d0 # new exponent = -(shft val) |
| 5680 |
mov.l %d0,%d1 # prepare for op_norm call |
| 5681 |
bra.b stzd_norm # finish scaling |
| 5682 |
|
| 5683 |
########################################################################## |
| 5684 |
|
| 5685 |
######################################################################### |
| 5686 |
# XDEF **************************************************************** # |
| 5687 |
# res_qnan(): return default result w/ QNAN operand for dyadic # |
| 5688 |
# res_snan(): return default result w/ SNAN operand for dyadic # |
| 5689 |
# res_qnan_1op(): return dflt result w/ QNAN operand for monadic # |
| 5690 |
# res_snan_1op(): return dflt result w/ SNAN operand for monadic # |
| 5691 |
# # |
| 5692 |
# XREF **************************************************************** # |
| 5693 |
# None # |
| 5694 |
# # |
| 5695 |
# INPUT *************************************************************** # |
| 5696 |
# FP_SRC(a6) = pointer to extended precision src operand # |
| 5697 |
# FP_DST(a6) = pointer to extended precision dst operand # |
| 5698 |
# # |
| 5699 |
# OUTPUT ************************************************************** # |
| 5700 |
# fp0 = default result # |
| 5701 |
# # |
| 5702 |
# ALGORITHM *********************************************************** # |
| 5703 |
# If either operand (but not both operands) of an operation is a # |
| 5704 |
# nonsignalling NAN, then that NAN is returned as the result. If both # |
| 5705 |
# operands are nonsignalling NANs, then the destination operand # |
| 5706 |
# nonsignalling NAN is returned as the result. # |
| 5707 |
# If either operand to an operation is a signalling NAN (SNAN), # |
| 5708 |
# then, the SNAN bit is set in the FPSR EXC byte. If the SNAN trap # |
| 5709 |
# enable bit is set in the FPCR, then the trap is taken and the # |
| 5710 |
# destination is not modified. If the SNAN trap enable bit is not set, # |
| 5711 |
# then the SNAN is converted to a nonsignalling NAN (by setting the # |
| 5712 |
# SNAN bit in the operand to one), and the operation continues as # |
| 5713 |
# described in the preceding paragraph, for nonsignalling NANs. # |
| 5714 |
# Make sure the appropriate FPSR bits are set before exiting. # |
| 5715 |
# # |
| 5716 |
######################################################################### |
| 5717 |
|
| 5718 |
global res_qnan |
| 5719 |
global res_snan |
| 5720 |
res_qnan: |
| 5721 |
res_snan: |
| 5722 |
cmp.b DTAG(%a6), &SNAN # is the dst an SNAN? |
| 5723 |
beq.b dst_snan2 |
| 5724 |
cmp.b DTAG(%a6), &QNAN # is the dst a QNAN? |
| 5725 |
beq.b dst_qnan2 |
| 5726 |
src_nan: |
| 5727 |
cmp.b STAG(%a6), &QNAN |
| 5728 |
beq.b src_qnan2 |
| 5729 |
global res_snan_1op |
| 5730 |
res_snan_1op: |
| 5731 |
src_snan2: |
| 5732 |
bset &0x6, FP_SRC_HI(%a6) # set SNAN bit |
| 5733 |
or.l &nan_mask+aiop_mask+snan_mask, USER_FPSR(%a6) |
| 5734 |
lea FP_SRC(%a6), %a0 |
| 5735 |
bra.b nan_comp |
| 5736 |
global res_qnan_1op |
| 5737 |
res_qnan_1op: |
| 5738 |
src_qnan2: |
| 5739 |
or.l &nan_mask, USER_FPSR(%a6) |
| 5740 |
lea FP_SRC(%a6), %a0 |
| 5741 |
bra.b nan_comp |
| 5742 |
dst_snan2: |
| 5743 |
or.l &nan_mask+aiop_mask+snan_mask, USER_FPSR(%a6) |
| 5744 |
bset &0x6, FP_DST_HI(%a6) # set SNAN bit |
| 5745 |
lea FP_DST(%a6), %a0 |
| 5746 |
bra.b nan_comp |
| 5747 |
dst_qnan2: |
| 5748 |
lea FP_DST(%a6), %a0 |
| 5749 |
cmp.b STAG(%a6), &SNAN |
| 5750 |
bne nan_done |
| 5751 |
or.l &aiop_mask+snan_mask, USER_FPSR(%a6) |
| 5752 |
nan_done: |
| 5753 |
or.l &nan_mask, USER_FPSR(%a6) |
| 5754 |
nan_comp: |
| 5755 |
btst &0x7, FTEMP_EX(%a0) # is NAN neg? |
| 5756 |
beq.b nan_not_neg |
| 5757 |
or.l &neg_mask, USER_FPSR(%a6) |
| 5758 |
nan_not_neg: |
| 5759 |
fmovm.x (%a0), &0x80 |
| 5760 |
rts |
| 5761 |
|
| 5762 |
######################################################################### |
| 5763 |
# XDEF **************************************************************** # |
| 5764 |
# res_operr(): return default result during operand error # |
| 5765 |
# # |
| 5766 |
# XREF **************************************************************** # |
| 5767 |
# None # |
| 5768 |
# # |
| 5769 |
# INPUT *************************************************************** # |
| 5770 |
# None # |
| 5771 |
# # |
| 5772 |
# OUTPUT ************************************************************** # |
| 5773 |
# fp0 = default operand error result # |
| 5774 |
# # |
| 5775 |
# ALGORITHM *********************************************************** # |
| 5776 |
# An nonsignalling NAN is returned as the default result when # |
| 5777 |
# an operand error occurs for the following cases: # |
| 5778 |
# # |
| 5779 |
# Multiply: (Infinity x Zero) # |
| 5780 |
# Divide : (Zero / Zero) || (Infinity / Infinity) # |
| 5781 |
# # |
| 5782 |
######################################################################### |
| 5783 |
|
| 5784 |
global res_operr |
| 5785 |
res_operr: |
| 5786 |
or.l &nan_mask+operr_mask+aiop_mask, USER_FPSR(%a6) |
| 5787 |
fmovm.x nan_return(%pc), &0x80 |
| 5788 |
rts |
| 5789 |
|
| 5790 |
nan_return: |
| 5791 |
long 0x7fff0000, 0xffffffff, 0xffffffff |
| 5792 |
|
| 5793 |
######################################################################### |
| 5794 |
# XDEF **************************************************************** # |
| 5795 |
# _denorm(): denormalize an intermediate result # |
| 5796 |
# # |
| 5797 |
# XREF **************************************************************** # |
| 5798 |
# None # |
| 5799 |
# # |
| 5800 |
# INPUT *************************************************************** # |
| 5801 |
# a0 = points to the operand to be denormalized # |
| 5802 |
# (in the internal extended format) # |
| 5803 |
# # |
| 5804 |
# d0 = rounding precision # |
| 5805 |
# # |
| 5806 |
# OUTPUT ************************************************************** # |
| 5807 |
# a0 = pointer to the denormalized result # |
| 5808 |
# (in the internal extended format) # |
| 5809 |
# # |
| 5810 |
# d0 = guard,round,sticky # |
| 5811 |
# # |
| 5812 |
# ALGORITHM *********************************************************** # |
| 5813 |
# According to the exponent underflow threshold for the given # |
| 5814 |
# precision, shift the mantissa bits to the right in order raise the # |
| 5815 |
# exponent of the operand to the threshold value. While shifting the # |
| 5816 |
# mantissa bits right, maintain the value of the guard, round, and # |
| 5817 |
# sticky bits. # |
| 5818 |
# other notes: # |
| 5819 |
# (1) _denorm() is called by the underflow routines # |
| 5820 |
# (2) _denorm() does NOT affect the status register # |
| 5821 |
# # |
| 5822 |
######################################################################### |
| 5823 |
|
| 5824 |
# |
| 5825 |
# table of exponent threshold values for each precision |
| 5826 |
# |
| 5827 |
tbl_thresh: |
| 5828 |
short 0x0 |
| 5829 |
short sgl_thresh |
| 5830 |
short dbl_thresh |
| 5831 |
|
| 5832 |
global _denorm |
| 5833 |
_denorm: |
| 5834 |
# |
| 5835 |
# Load the exponent threshold for the precision selected and check |
| 5836 |
# to see if (threshold - exponent) is > 65 in which case we can |
| 5837 |
# simply calculate the sticky bit and zero the mantissa. otherwise |
| 5838 |
# we have to call the denormalization routine. |
| 5839 |
# |
| 5840 |
lsr.b &0x2, %d0 # shift prec to lo bits |
| 5841 |
mov.w (tbl_thresh.b,%pc,%d0.w*2), %d1 # load prec threshold |
| 5842 |
mov.w %d1, %d0 # copy d1 into d0 |
| 5843 |
sub.w FTEMP_EX(%a0), %d0 # diff = threshold - exp |
| 5844 |
cmpi.w %d0, &66 # is diff > 65? (mant + g,r bits) |
| 5845 |
bpl.b denorm_set_stky # yes; just calc sticky |
| 5846 |
|
| 5847 |
clr.l %d0 # clear g,r,s |
| 5848 |
btst &inex2_bit, FPSR_EXCEPT(%a6) # yes; was INEX2 set? |
| 5849 |
beq.b denorm_call # no; don't change anything |
| 5850 |
bset &29, %d0 # yes; set sticky bit |
| 5851 |
|
| 5852 |
denorm_call: |
| 5853 |
bsr.l dnrm_lp # denormalize the number |
| 5854 |
rts |
| 5855 |
|
| 5856 |
# |
| 5857 |
# all bit would have been shifted off during the denorm so simply |
| 5858 |
# calculate if the sticky should be set and clear the entire mantissa. |
| 5859 |
# |
| 5860 |
denorm_set_stky: |
| 5861 |
mov.l &0x20000000, %d0 # set sticky bit in return value |
| 5862 |
mov.w %d1, FTEMP_EX(%a0) # load exp with threshold |
| 5863 |
clr.l FTEMP_HI(%a0) # set d1 = 0 (ms mantissa) |
| 5864 |
clr.l FTEMP_LO(%a0) # set d2 = 0 (ms mantissa) |
| 5865 |
rts |
| 5866 |
|
| 5867 |
# # |
| 5868 |
# dnrm_lp(): normalize exponent/mantissa to specified threshold # |
| 5869 |
# # |
| 5870 |
# INPUT: # |
| 5871 |
# %a0 : points to the operand to be denormalized # |
| 5872 |
# %d0{31:29} : initial guard,round,sticky # |
| 5873 |
# %d1{15:0} : denormalization threshold # |
| 5874 |
# OUTPUT: # |
| 5875 |
# %a0 : points to the denormalized operand # |
| 5876 |
# %d0{31:29} : final guard,round,sticky # |
| 5877 |
# # |
| 5878 |
|
| 5879 |
# *** Local Equates *** # |
| 5880 |
set GRS, L_SCR2 # g,r,s temp storage |
| 5881 |
set FTEMP_LO2, L_SCR1 # FTEMP_LO copy |
| 5882 |
|
| 5883 |
global dnrm_lp |
| 5884 |
dnrm_lp: |
| 5885 |
|
| 5886 |
# |
| 5887 |
# make a copy of FTEMP_LO and place the g,r,s bits directly after it |
| 5888 |
# in memory so as to make the bitfield extraction for denormalization easier. |
| 5889 |
# |
| 5890 |
mov.l FTEMP_LO(%a0), FTEMP_LO2(%a6) # make FTEMP_LO copy |
| 5891 |
mov.l %d0, GRS(%a6) # place g,r,s after it |
| 5892 |
|
| 5893 |
# |
| 5894 |
# check to see how much less than the underflow threshold the operand |
| 5895 |
# exponent is. |
| 5896 |
# |
| 5897 |
mov.l %d1, %d0 # copy the denorm threshold |
| 5898 |
sub.w FTEMP_EX(%a0), %d1 # d1 = threshold - uns exponent |
| 5899 |
ble.b dnrm_no_lp # d1 <= 0 |
| 5900 |
cmpi.w %d1, &0x20 # is ( 0 <= d1 < 32) ? |
| 5901 |
blt.b case_1 # yes |
| 5902 |
cmpi.w %d1, &0x40 # is (32 <= d1 < 64) ? |
| 5903 |
blt.b case_2 # yes |
| 5904 |
bra.w case_3 # (d1 >= 64) |
| 5905 |
|
| 5906 |
# |
| 5907 |
# No normalization necessary |
| 5908 |
# |
| 5909 |
dnrm_no_lp: |
| 5910 |
mov.l GRS(%a6), %d0 # restore original g,r,s |
| 5911 |
rts |
| 5912 |
|
| 5913 |
# |
| 5914 |
# case (0<d1<32) |
| 5915 |
# |
| 5916 |
# %d0 = denorm threshold |
| 5917 |
# %d1 = "n" = amt to shift |
| 5918 |
# |
| 5919 |
# --------------------------------------------------------- |
| 5920 |
# | FTEMP_HI | FTEMP_LO |grs000.........000| |
| 5921 |
# --------------------------------------------------------- |
| 5922 |
# <-(32 - n)-><-(n)-><-(32 - n)-><-(n)-><-(32 - n)-><-(n)-> |
| 5923 |
# \ \ \ \ |
| 5924 |
# \ \ \ \ |
| 5925 |
# \ \ \ \ |
| 5926 |
# \ \ \ \ |
| 5927 |
# \ \ \ \ |
| 5928 |
# \ \ \ \ |
| 5929 |
# \ \ \ \ |
| 5930 |
# \ \ \ \ |
| 5931 |
# <-(n)-><-(32 - n)-><------(32)-------><------(32)-------> |
| 5932 |
# --------------------------------------------------------- |
| 5933 |
# |0.....0| NEW_HI | NEW_FTEMP_LO |grs | |
| 5934 |
# --------------------------------------------------------- |
| 5935 |
# |
| 5936 |
case_1: |
| 5937 |
mov.l %d2, -(%sp) # create temp storage |
| 5938 |
|
| 5939 |
mov.w %d0, FTEMP_EX(%a0) # exponent = denorm threshold |
| 5940 |
mov.l &32, %d0 |
| 5941 |
sub.w %d1, %d0 # %d0 = 32 - %d1 |
| 5942 |
|
| 5943 |
cmpi.w %d1, &29 # is shft amt >= 29 |
| 5944 |
blt.b case1_extract # no; no fix needed |
| 5945 |
mov.b GRS(%a6), %d2 |
| 5946 |
or.b %d2, 3+FTEMP_LO2(%a6) |
| 5947 |
|
| 5948 |
case1_extract: |
| 5949 |
bfextu FTEMP_HI(%a0){&0:%d0}, %d2 # %d2 = new FTEMP_HI |
| 5950 |
bfextu FTEMP_HI(%a0){%d0:&32}, %d1 # %d1 = new FTEMP_LO |
| 5951 |
bfextu FTEMP_LO2(%a6){%d0:&32}, %d0 # %d0 = new G,R,S |
| 5952 |
|
| 5953 |
mov.l %d2, FTEMP_HI(%a0) # store new FTEMP_HI |
| 5954 |
mov.l %d1, FTEMP_LO(%a0) # store new FTEMP_LO |
| 5955 |
|
| 5956 |
bftst %d0{&2:&30} # were bits shifted off? |
| 5957 |
beq.b case1_sticky_clear # no; go finish |
| 5958 |
bset &rnd_stky_bit, %d0 # yes; set sticky bit |
| 5959 |
|
| 5960 |
case1_sticky_clear: |
| 5961 |
and.l &0xe0000000, %d0 # clear all but G,R,S |
| 5962 |
mov.l (%sp)+, %d2 # restore temp register |
| 5963 |
rts |
| 5964 |
|
| 5965 |
# |
| 5966 |
# case (32<=d1<64) |
| 5967 |
# |
| 5968 |
# %d0 = denorm threshold |
| 5969 |
# %d1 = "n" = amt to shift |
| 5970 |
# |
| 5971 |
# --------------------------------------------------------- |
| 5972 |
# | FTEMP_HI | FTEMP_LO |grs000.........000| |
| 5973 |
# --------------------------------------------------------- |
| 5974 |
# <-(32 - n)-><-(n)-><-(32 - n)-><-(n)-><-(32 - n)-><-(n)-> |
| 5975 |
# \ \ \ |
| 5976 |
# \ \ \ |
| 5977 |
# \ \ ------------------- |
| 5978 |
# \ -------------------- \ |
| 5979 |
# ------------------- \ \ |
| 5980 |
# \ \ \ |
| 5981 |
# \ \ \ |
| 5982 |
# \ \ \ |
| 5983 |
# <-------(32)------><-(n)-><-(32 - n)-><------(32)-------> |
| 5984 |
# --------------------------------------------------------- |
| 5985 |
# |0...............0|0....0| NEW_LO |grs | |
| 5986 |
# --------------------------------------------------------- |
| 5987 |
# |
| 5988 |
case_2: |
| 5989 |
mov.l %d2, -(%sp) # create temp storage |
| 5990 |
|
| 5991 |
mov.w %d0, FTEMP_EX(%a0) # exponent = denorm threshold |
| 5992 |
subi.w &0x20, %d1 # %d1 now between 0 and 32 |
| 5993 |
mov.l &0x20, %d0 |
| 5994 |
sub.w %d1, %d0 # %d0 = 32 - %d1 |
| 5995 |
|
| 5996 |
# subtle step here; or in the g,r,s at the bottom of FTEMP_LO to minimize |
| 5997 |
# the number of bits to check for the sticky detect. |
| 5998 |
# it only plays a role in shift amounts of 61-63. |
| 5999 |
mov.b GRS(%a6), %d2 |
| 6000 |
or.b %d2, 3+FTEMP_LO2(%a6) |
| 6001 |
|
| 6002 |
bfextu FTEMP_HI(%a0){&0:%d0}, %d2 # %d2 = new FTEMP_LO |
| 6003 |
bfextu FTEMP_HI(%a0){%d0:&32}, %d1 # %d1 = new G,R,S |
| 6004 |
|
| 6005 |
bftst %d1{&2:&30} # were any bits shifted off? |
| 6006 |
bne.b case2_set_sticky # yes; set sticky bit |
| 6007 |
bftst FTEMP_LO2(%a6){%d0:&31} # were any bits shifted off? |
| 6008 |
bne.b case2_set_sticky # yes; set sticky bit |
| 6009 |
|
| 6010 |
mov.l %d1, %d0 # move new G,R,S to %d0 |
| 6011 |
bra.b case2_end |
| 6012 |
|
| 6013 |
case2_set_sticky: |
| 6014 |
mov.l %d1, %d0 # move new G,R,S to %d0 |
| 6015 |
bset &rnd_stky_bit, %d0 # set sticky bit |
| 6016 |
|
| 6017 |
case2_end: |
| 6018 |
clr.l FTEMP_HI(%a0) # store FTEMP_HI = 0 |
| 6019 |
mov.l %d2, FTEMP_LO(%a0) # store FTEMP_LO |
| 6020 |
and.l &0xe0000000, %d0 # clear all but G,R,S |
| 6021 |
|
| 6022 |
mov.l (%sp)+,%d2 # restore temp register |
| 6023 |
rts |
| 6024 |
|
| 6025 |
# |
| 6026 |
# case (d1>=64) |
| 6027 |
# |
| 6028 |
# %d0 = denorm threshold |
| 6029 |
# %d1 = amt to shift |
| 6030 |
# |
| 6031 |
case_3: |
| 6032 |
mov.w %d0, FTEMP_EX(%a0) # insert denorm threshold |
| 6033 |
|
| 6034 |
cmpi.w %d1, &65 # is shift amt > 65? |
| 6035 |
blt.b case3_64 # no; it's == 64 |
| 6036 |
beq.b case3_65 # no; it's == 65 |
| 6037 |
|
| 6038 |
# |
| 6039 |
# case (d1>65) |
| 6040 |
# |
| 6041 |
# Shift value is > 65 and out of range. All bits are shifted off. |
| 6042 |
# Return a zero mantissa with the sticky bit set |
| 6043 |
# |
| 6044 |
clr.l FTEMP_HI(%a0) # clear hi(mantissa) |
| 6045 |
clr.l FTEMP_LO(%a0) # clear lo(mantissa) |
| 6046 |
mov.l &0x20000000, %d0 # set sticky bit |
| 6047 |
rts |
| 6048 |
|
| 6049 |
# |
| 6050 |
# case (d1 == 64) |
| 6051 |
# |
| 6052 |
# --------------------------------------------------------- |
| 6053 |
# | FTEMP_HI | FTEMP_LO |grs000.........000| |
| 6054 |
# --------------------------------------------------------- |
| 6055 |
# <-------(32)------> |
| 6056 |
# \ \ |
| 6057 |
# \ \ |
| 6058 |
# \ \ |
| 6059 |
# \ ------------------------------ |
| 6060 |
# ------------------------------- \ |
| 6061 |
# \ \ |
| 6062 |
# \ \ |
| 6063 |
# \ \ |
| 6064 |
# <-------(32)------> |
| 6065 |
# --------------------------------------------------------- |
| 6066 |
# |0...............0|0................0|grs | |
| 6067 |
# --------------------------------------------------------- |
| 6068 |
# |
| 6069 |
case3_64: |
| 6070 |
mov.l FTEMP_HI(%a0), %d0 # fetch hi(mantissa) |
| 6071 |
mov.l %d0, %d1 # make a copy |
| 6072 |
and.l &0xc0000000, %d0 # extract G,R |
| 6073 |
and.l &0x3fffffff, %d1 # extract other bits |
| 6074 |
|
| 6075 |
bra.b case3_complete |
| 6076 |
|
| 6077 |
# |
| 6078 |
# case (d1 == 65) |
| 6079 |
# |
| 6080 |
# --------------------------------------------------------- |
| 6081 |
# | FTEMP_HI | FTEMP_LO |grs000.........000| |
| 6082 |
# --------------------------------------------------------- |
| 6083 |
# <-------(32)------> |
| 6084 |
# \ \ |
| 6085 |
# \ \ |
| 6086 |
# \ \ |
| 6087 |
# \ ------------------------------ |
| 6088 |
# -------------------------------- \ |
| 6089 |
# \ \ |
| 6090 |
# \ \ |
| 6091 |
# \ \ |
| 6092 |
# <-------(31)-----> |
| 6093 |
# --------------------------------------------------------- |
| 6094 |
# |0...............0|0................0|0rs | |
| 6095 |
# --------------------------------------------------------- |
| 6096 |
# |
| 6097 |
case3_65: |
| 6098 |
mov.l FTEMP_HI(%a0), %d0 # fetch hi(mantissa) |
| 6099 |
and.l &0x80000000, %d0 # extract R bit |
| 6100 |
lsr.l &0x1, %d0 # shift high bit into R bit |
| 6101 |
and.l &0x7fffffff, %d1 # extract other bits |
| 6102 |
|
| 6103 |
case3_complete: |
| 6104 |
# last operation done was an "and" of the bits shifted off so the condition |
| 6105 |
# codes are already set so branch accordingly. |
| 6106 |
bne.b case3_set_sticky # yes; go set new sticky |
| 6107 |
tst.l FTEMP_LO(%a0) # were any bits shifted off? |
| 6108 |
bne.b case3_set_sticky # yes; go set new sticky |
| 6109 |
tst.b GRS(%a6) # were any bits shifted off? |
| 6110 |
bne.b case3_set_sticky # yes; go set new sticky |
| 6111 |
|
| 6112 |
# |
| 6113 |
# no bits were shifted off so don't set the sticky bit. |
| 6114 |
# the guard and |
| 6115 |
# the entire mantissa is zero. |
| 6116 |
# |
| 6117 |
clr.l FTEMP_HI(%a0) # clear hi(mantissa) |
| 6118 |
clr.l FTEMP_LO(%a0) # clear lo(mantissa) |
| 6119 |
rts |
| 6120 |
|
| 6121 |
# |
| 6122 |
# some bits were shifted off so set the sticky bit. |
| 6123 |
# the entire mantissa is zero. |
| 6124 |
# |
| 6125 |
case3_set_sticky: |
| 6126 |
bset &rnd_stky_bit,%d0 # set new sticky bit |
| 6127 |
clr.l FTEMP_HI(%a0) # clear hi(mantissa) |
| 6128 |
clr.l FTEMP_LO(%a0) # clear lo(mantissa) |
| 6129 |
rts |
| 6130 |
|
| 6131 |
######################################################################### |
| 6132 |
# XDEF **************************************************************** # |
| 6133 |
# _round(): round result according to precision/mode # |
| 6134 |
# # |
| 6135 |
# XREF **************************************************************** # |
| 6136 |
# None # |
| 6137 |
# # |
| 6138 |
# INPUT *************************************************************** # |
| 6139 |
# a0 = ptr to input operand in internal extended format # |
| 6140 |
# d1(hi) = contains rounding precision: # |
| 6141 |
# ext = $0000xxxx # |
| 6142 |
# sgl = $0004xxxx # |
| 6143 |
# dbl = $0008xxxx # |
| 6144 |
# d1(lo) = contains rounding mode: # |
| 6145 |
# RN = $xxxx0000 # |
| 6146 |
# RZ = $xxxx0001 # |
| 6147 |
# RM = $xxxx0002 # |
| 6148 |
# RP = $xxxx0003 # |
| 6149 |
# d0{31:29} = contains the g,r,s bits (extended) # |
| 6150 |
# # |
| 6151 |
# OUTPUT ************************************************************** # |
| 6152 |
# a0 = pointer to rounded result # |
| 6153 |
# # |
| 6154 |
# ALGORITHM *********************************************************** # |
| 6155 |
# On return the value pointed to by a0 is correctly rounded, # |
| 6156 |
# a0 is preserved and the g-r-s bits in d0 are cleared. # |
| 6157 |
# The result is not typed - the tag field is invalid. The # |
| 6158 |
# result is still in the internal extended format. # |
| 6159 |
# # |
| 6160 |
# The INEX bit of USER_FPSR will be set if the rounded result was # |
| 6161 |
# inexact (i.e. if any of the g-r-s bits were set). # |
| 6162 |
# # |
| 6163 |
######################################################################### |
| 6164 |
|
| 6165 |
global _round |
| 6166 |
_round: |
| 6167 |
# |
| 6168 |
# ext_grs() looks at the rounding precision and sets the appropriate |
| 6169 |
# G,R,S bits. |
| 6170 |
# If (G,R,S == 0) then result is exact and round is done, else set |
| 6171 |
# the inex flag in status reg and continue. |
| 6172 |
# |
| 6173 |
bsr.l ext_grs # extract G,R,S |
| 6174 |
|
| 6175 |
tst.l %d0 # are G,R,S zero? |
| 6176 |
beq.w truncate # yes; round is complete |
| 6177 |
|
| 6178 |
or.w &inx2a_mask, 2+USER_FPSR(%a6) # set inex2/ainex |
| 6179 |
|
| 6180 |
# |
| 6181 |
# Use rounding mode as an index into a jump table for these modes. |
| 6182 |
# All of the following assumes grs != 0. |
| 6183 |
# |
| 6184 |
mov.w (tbl_mode.b,%pc,%d1.w*2), %a1 # load jump offset |
| 6185 |
jmp (tbl_mode.b,%pc,%a1) # jmp to rnd mode handler |
| 6186 |
|
| 6187 |
tbl_mode: |
| 6188 |
short rnd_near - tbl_mode |
| 6189 |
short truncate - tbl_mode # RZ always truncates |
| 6190 |
short rnd_mnus - tbl_mode |
| 6191 |
short rnd_plus - tbl_mode |
| 6192 |
|
| 6193 |
################################################################# |
| 6194 |
# ROUND PLUS INFINITY # |
| 6195 |
# # |
| 6196 |
# If sign of fp number = 0 (positive), then add 1 to l. # |
| 6197 |
################################################################# |
| 6198 |
rnd_plus: |
| 6199 |
tst.b FTEMP_SGN(%a0) # check for sign |
| 6200 |
bmi.w truncate # if positive then truncate |
| 6201 |
|
| 6202 |
mov.l &0xffffffff, %d0 # force g,r,s to be all f's |
| 6203 |
swap %d1 # set up d1 for round prec. |
| 6204 |
|
| 6205 |
cmpi.b %d1, &s_mode # is prec = sgl? |
| 6206 |
beq.w add_sgl # yes |
| 6207 |
bgt.w add_dbl # no; it's dbl |
| 6208 |
bra.w add_ext # no; it's ext |
| 6209 |
|
| 6210 |
################################################################# |
| 6211 |
# ROUND MINUS INFINITY # |
| 6212 |
# # |
| 6213 |
# If sign of fp number = 1 (negative), then add 1 to l. # |
| 6214 |
################################################################# |
| 6215 |
rnd_mnus: |
| 6216 |
tst.b FTEMP_SGN(%a0) # check for sign |
| 6217 |
bpl.w truncate # if negative then truncate |
| 6218 |
|
| 6219 |
mov.l &0xffffffff, %d0 # force g,r,s to be all f's |
| 6220 |
swap %d1 # set up d1 for round prec. |
| 6221 |
|
| 6222 |
cmpi.b %d1, &s_mode # is prec = sgl? |
| 6223 |
beq.w add_sgl # yes |
| 6224 |
bgt.w add_dbl # no; it's dbl |
| 6225 |
bra.w add_ext # no; it's ext |
| 6226 |
|
| 6227 |
################################################################# |
| 6228 |
# ROUND NEAREST # |
| 6229 |
# # |
| 6230 |
# If (g=1), then add 1 to l and if (r=s=0), then clear l # |
| 6231 |
# Note that this will round to even in case of a tie. # |
| 6232 |
################################################################# |
| 6233 |
rnd_near: |
| 6234 |
asl.l &0x1, %d0 # shift g-bit to c-bit |
| 6235 |
bcc.w truncate # if (g=1) then |
| 6236 |
|
| 6237 |
swap %d1 # set up d1 for round prec. |
| 6238 |
|
| 6239 |
cmpi.b %d1, &s_mode # is prec = sgl? |
| 6240 |
beq.w add_sgl # yes |
| 6241 |
bgt.w add_dbl # no; it's dbl |
| 6242 |
bra.w add_ext # no; it's ext |
| 6243 |
|
| 6244 |
# *** LOCAL EQUATES *** |
| 6245 |
set ad_1_sgl, 0x00000100 # constant to add 1 to l-bit in sgl prec |
| 6246 |
set ad_1_dbl, 0x00000800 # constant to add 1 to l-bit in dbl prec |
| 6247 |
|
| 6248 |
######################### |
| 6249 |
# ADD SINGLE # |
| 6250 |
######################### |
| 6251 |
add_sgl: |
| 6252 |
add.l &ad_1_sgl, FTEMP_HI(%a0) |
| 6253 |
bcc.b scc_clr # no mantissa overflow |
| 6254 |
roxr.w FTEMP_HI(%a0) # shift v-bit back in |
| 6255 |
roxr.w FTEMP_HI+2(%a0) # shift v-bit back in |
| 6256 |
add.w &0x1, FTEMP_EX(%a0) # and incr exponent |
| 6257 |
scc_clr: |
| 6258 |
tst.l %d0 # test for rs = 0 |
| 6259 |
bne.b sgl_done |
| 6260 |
and.w &0xfe00, FTEMP_HI+2(%a0) # clear the l-bit |
| 6261 |
sgl_done: |
| 6262 |
and.l &0xffffff00, FTEMP_HI(%a0) # truncate bits beyond sgl limit |
| 6263 |
clr.l FTEMP_LO(%a0) # clear d2 |
| 6264 |
rts |
| 6265 |
|
| 6266 |
######################### |
| 6267 |
# ADD EXTENDED # |
| 6268 |
######################### |
| 6269 |
add_ext: |
| 6270 |
addq.l &1,FTEMP_LO(%a0) # add 1 to l-bit |
| 6271 |
bcc.b xcc_clr # test for carry out |
| 6272 |
addq.l &1,FTEMP_HI(%a0) # propagate carry |
| 6273 |
bcc.b xcc_clr |
| 6274 |
roxr.w FTEMP_HI(%a0) # mant is 0 so restore v-bit |
| 6275 |
roxr.w FTEMP_HI+2(%a0) # mant is 0 so restore v-bit |
| 6276 |
roxr.w FTEMP_LO(%a0) |
| 6277 |
roxr.w FTEMP_LO+2(%a0) |
| 6278 |
add.w &0x1,FTEMP_EX(%a0) # and inc exp |
| 6279 |
xcc_clr: |
| 6280 |
tst.l %d0 # test rs = 0 |
| 6281 |
bne.b add_ext_done |
| 6282 |
and.b &0xfe,FTEMP_LO+3(%a0) # clear the l bit |
| 6283 |
add_ext_done: |
| 6284 |
rts |
| 6285 |
|
| 6286 |
######################### |
| 6287 |
# ADD DOUBLE # |
| 6288 |
######################### |
| 6289 |
add_dbl: |
| 6290 |
add.l &ad_1_dbl, FTEMP_LO(%a0) # add 1 to lsb |
| 6291 |
bcc.b dcc_clr # no carry |
| 6292 |
addq.l &0x1, FTEMP_HI(%a0) # propagate carry |
| 6293 |
bcc.b dcc_clr # no carry |
| 6294 |
|
| 6295 |
roxr.w FTEMP_HI(%a0) # mant is 0 so restore v-bit |
| 6296 |
roxr.w FTEMP_HI+2(%a0) # mant is 0 so restore v-bit |
| 6297 |
roxr.w FTEMP_LO(%a0) |
| 6298 |
roxr.w FTEMP_LO+2(%a0) |
| 6299 |
addq.w &0x1, FTEMP_EX(%a0) # incr exponent |
| 6300 |
dcc_clr: |
| 6301 |
tst.l %d0 # test for rs = 0 |
| 6302 |
bne.b dbl_done |
| 6303 |
and.w &0xf000, FTEMP_LO+2(%a0) # clear the l-bit |
| 6304 |
|
| 6305 |
dbl_done: |
| 6306 |
and.l &0xfffff800,FTEMP_LO(%a0) # truncate bits beyond dbl limit |
| 6307 |
rts |
| 6308 |
|
| 6309 |
########################### |
| 6310 |
# Truncate all other bits # |
| 6311 |
########################### |
| 6312 |
truncate: |
| 6313 |
swap %d1 # select rnd prec |
| 6314 |
|
| 6315 |
cmpi.b %d1, &s_mode # is prec sgl? |
| 6316 |
beq.w sgl_done # yes |
| 6317 |
bgt.b dbl_done # no; it's dbl |
| 6318 |
rts # no; it's ext |
| 6319 |
|
| 6320 |
|
| 6321 |
# |
| 6322 |
# ext_grs(): extract guard, round and sticky bits according to |
| 6323 |
# rounding precision. |
| 6324 |
# |
| 6325 |
# INPUT |
| 6326 |
# d0 = extended precision g,r,s (in d0{31:29}) |
| 6327 |
# d1 = {PREC,ROUND} |
| 6328 |
# OUTPUT |
| 6329 |
# d0{31:29} = guard, round, sticky |
| 6330 |
# |
| 6331 |
# The ext_grs extract the guard/round/sticky bits according to the |
| 6332 |
# selected rounding precision. It is called by the round subroutine |
| 6333 |
# only. All registers except d0 are kept intact. d0 becomes an |
| 6334 |
# updated guard,round,sticky in d0{31:29} |
| 6335 |
# |
| 6336 |
# Notes: the ext_grs uses the round PREC, and therefore has to swap d1 |
| 6337 |
# prior to usage, and needs to restore d1 to original. this |
| 6338 |
# routine is tightly tied to the round routine and not meant to |
| 6339 |
# uphold standard subroutine calling practices. |
| 6340 |
# |
| 6341 |
|
| 6342 |
ext_grs: |
| 6343 |
swap %d1 # have d1.w point to round precision |
| 6344 |
tst.b %d1 # is rnd prec = extended? |
| 6345 |
bne.b ext_grs_not_ext # no; go handle sgl or dbl |
| 6346 |
|
| 6347 |
# |
| 6348 |
# %d0 actually already hold g,r,s since _round() had it before calling |
| 6349 |
# this function. so, as long as we don't disturb it, we are "returning" it. |
| 6350 |
# |
| 6351 |
ext_grs_ext: |
| 6352 |
swap %d1 # yes; return to correct positions |
| 6353 |
rts |
| 6354 |
|
| 6355 |
ext_grs_not_ext: |
| 6356 |
movm.l &0x3000, -(%sp) # make some temp registers {d2/d3} |
| 6357 |
|
| 6358 |
cmpi.b %d1, &s_mode # is rnd prec = sgl? |
| 6359 |
bne.b ext_grs_dbl # no; go handle dbl |
| 6360 |
|
| 6361 |
# |
| 6362 |
# sgl: |
| 6363 |
# 96 64 40 32 0 |
| 6364 |
# ----------------------------------------------------- |
| 6365 |
# | EXP |XXXXXXX| |xx | |grs| |
| 6366 |
# ----------------------------------------------------- |
| 6367 |
# <--(24)--->nn\ / |
| 6368 |
# ee --------------------- |
| 6369 |
# ww | |
| 6370 |
# v |
| 6371 |
# gr new sticky |
| 6372 |
# |
| 6373 |
ext_grs_sgl: |
| 6374 |
bfextu FTEMP_HI(%a0){&24:&2}, %d3 # sgl prec. g-r are 2 bits right |
| 6375 |
mov.l &30, %d2 # of the sgl prec. limits |
| 6376 |
lsl.l %d2, %d3 # shift g-r bits to MSB of d3 |
| 6377 |
mov.l FTEMP_HI(%a0), %d2 # get word 2 for s-bit test |
| 6378 |
and.l &0x0000003f, %d2 # s bit is the or of all other |
| 6379 |
bne.b ext_grs_st_stky # bits to the right of g-r |
| 6380 |
tst.l FTEMP_LO(%a0) # test lower mantissa |
| 6381 |
bne.b ext_grs_st_stky # if any are set, set sticky |
| 6382 |
tst.l %d0 # test original g,r,s |
| 6383 |
bne.b ext_grs_st_stky # if any are set, set sticky |
| 6384 |
bra.b ext_grs_end_sd # if words 3 and 4 are clr, exit |
| 6385 |
|
| 6386 |
# |
| 6387 |
# dbl: |
| 6388 |
# 96 64 32 11 0 |
| 6389 |
# ----------------------------------------------------- |
| 6390 |
# | EXP |XXXXXXX| | |xx |grs| |
| 6391 |
# ----------------------------------------------------- |
| 6392 |
# nn\ / |
| 6393 |
# ee ------- |
| 6394 |
# ww | |
| 6395 |
# v |
| 6396 |
# gr new sticky |
| 6397 |
# |
| 6398 |
ext_grs_dbl: |
| 6399 |
bfextu FTEMP_LO(%a0){&21:&2}, %d3 # dbl-prec. g-r are 2 bits right |
| 6400 |
mov.l &30, %d2 # of the dbl prec. limits |
| 6401 |
lsl.l %d2, %d3 # shift g-r bits to the MSB of d3 |
| 6402 |
mov.l FTEMP_LO(%a0), %d2 # get lower mantissa for s-bit test |
| 6403 |
and.l &0x000001ff, %d2 # s bit is the or-ing of all |
| 6404 |
bne.b ext_grs_st_stky # other bits to the right of g-r |
| 6405 |
tst.l %d0 # test word original g,r,s |
| 6406 |
bne.b ext_grs_st_stky # if any are set, set sticky |
| 6407 |
bra.b ext_grs_end_sd # if clear, exit |
| 6408 |
|
| 6409 |
ext_grs_st_stky: |
| 6410 |
bset &rnd_stky_bit, %d3 # set sticky bit |
| 6411 |
ext_grs_end_sd: |
| 6412 |
mov.l %d3, %d0 # return grs to d0 |
| 6413 |
|
| 6414 |
movm.l (%sp)+, &0xc # restore scratch registers {d2/d3} |
| 6415 |
|
| 6416 |
swap %d1 # restore d1 to original |
| 6417 |
rts |
| 6418 |
|
| 6419 |
######################################################################### |
| 6420 |
# norm(): normalize the mantissa of an extended precision input. the # |
| 6421 |
# input operand should not be normalized already. # |
| 6422 |
# # |
| 6423 |
# XDEF **************************************************************** # |
| 6424 |
# norm() # |
| 6425 |
# # |
| 6426 |
# XREF **************************************************************** # |
| 6427 |
# none # |
| 6428 |
# # |
| 6429 |
# INPUT *************************************************************** # |
| 6430 |
# a0 = pointer fp extended precision operand to normalize # |
| 6431 |
# # |
| 6432 |
# OUTPUT ************************************************************** # |
| 6433 |
# d0 = number of bit positions the mantissa was shifted # |
| 6434 |
# a0 = the input operand's mantissa is normalized; the exponent # |
| 6435 |
# is unchanged. # |
| 6436 |
# # |
| 6437 |
######################################################################### |
| 6438 |
global norm |
| 6439 |
norm: |
| 6440 |
mov.l %d2, -(%sp) # create some temp regs |
| 6441 |
mov.l %d3, -(%sp) |
| 6442 |
|
| 6443 |
mov.l FTEMP_HI(%a0), %d0 # load hi(mantissa) |
| 6444 |
mov.l FTEMP_LO(%a0), %d1 # load lo(mantissa) |
| 6445 |
|
| 6446 |
bfffo %d0{&0:&32}, %d2 # how many places to shift? |
| 6447 |
beq.b norm_lo # hi(man) is all zeroes! |
| 6448 |
|
| 6449 |
norm_hi: |
| 6450 |
lsl.l %d2, %d0 # left shift hi(man) |
| 6451 |
bfextu %d1{&0:%d2}, %d3 # extract lo bits |
| 6452 |
|
| 6453 |
or.l %d3, %d0 # create hi(man) |
| 6454 |
lsl.l %d2, %d1 # create lo(man) |
| 6455 |
|
| 6456 |
mov.l %d0, FTEMP_HI(%a0) # store new hi(man) |
| 6457 |
mov.l %d1, FTEMP_LO(%a0) # store new lo(man) |
| 6458 |
|
| 6459 |
mov.l %d2, %d0 # return shift amount |
| 6460 |
|
| 6461 |
mov.l (%sp)+, %d3 # restore temp regs |
| 6462 |
mov.l (%sp)+, %d2 |
| 6463 |
|
| 6464 |
rts |
| 6465 |
|
| 6466 |
norm_lo: |
| 6467 |
bfffo %d1{&0:&32}, %d2 # how many places to shift? |
| 6468 |
lsl.l %d2, %d1 # shift lo(man) |
| 6469 |
add.l &32, %d2 # add 32 to shft amount |
| 6470 |
|
| 6471 |
mov.l %d1, FTEMP_HI(%a0) # store hi(man) |
| 6472 |
clr.l FTEMP_LO(%a0) # lo(man) is now zero |
| 6473 |
|
| 6474 |
mov.l %d2, %d0 # return shift amount |
| 6475 |
|
| 6476 |
mov.l (%sp)+, %d3 # restore temp regs |
| 6477 |
mov.l (%sp)+, %d2 |
| 6478 |
|
| 6479 |
rts |
| 6480 |
|
| 6481 |
######################################################################### |
| 6482 |
# unnorm_fix(): - changes an UNNORM to one of NORM, DENORM, or ZERO # |
| 6483 |
# - returns corresponding optype tag # |
| 6484 |
# # |
| 6485 |
# XDEF **************************************************************** # |
| 6486 |
# unnorm_fix() # |
| 6487 |
# # |
| 6488 |
# XREF **************************************************************** # |
| 6489 |
# norm() - normalize the mantissa # |
| 6490 |
# # |
| 6491 |
# INPUT *************************************************************** # |
| 6492 |
# a0 = pointer to unnormalized extended precision number # |
| 6493 |
# # |
| 6494 |
# OUTPUT ************************************************************** # |
| 6495 |
# d0 = optype tag - is corrected to one of NORM, DENORM, or ZERO # |
| 6496 |
# a0 = input operand has been converted to a norm, denorm, or # |
| 6497 |
# zero; both the exponent and mantissa are changed. # |
| 6498 |
# # |
| 6499 |
######################################################################### |
| 6500 |
|
| 6501 |
global unnorm_fix |
| 6502 |
unnorm_fix: |
| 6503 |
bfffo FTEMP_HI(%a0){&0:&32}, %d0 # how many shifts are needed? |
| 6504 |
bne.b unnorm_shift # hi(man) is not all zeroes |
| 6505 |
|
| 6506 |
# |
| 6507 |
# hi(man) is all zeroes so see if any bits in lo(man) are set |
| 6508 |
# |
| 6509 |
unnorm_chk_lo: |
| 6510 |
bfffo FTEMP_LO(%a0){&0:&32}, %d0 # is operand really a zero? |
| 6511 |
beq.w unnorm_zero # yes |
| 6512 |
|
| 6513 |
add.w &32, %d0 # no; fix shift distance |
| 6514 |
|
| 6515 |
# |
| 6516 |
# d0 = # shifts needed for complete normalization |
| 6517 |
# |
| 6518 |
unnorm_shift: |
| 6519 |
clr.l %d1 # clear top word |
| 6520 |
mov.w FTEMP_EX(%a0), %d1 # extract exponent |
| 6521 |
and.w &0x7fff, %d1 # strip off sgn |
| 6522 |
|
| 6523 |
cmp.w %d0, %d1 # will denorm push exp < 0? |
| 6524 |
bgt.b unnorm_nrm_zero # yes; denorm only until exp = 0 |
| 6525 |
|
| 6526 |
# |
| 6527 |
# exponent would not go < 0. Therefore, number stays normalized |
| 6528 |
# |
| 6529 |
sub.w %d0, %d1 # shift exponent value |
| 6530 |
mov.w FTEMP_EX(%a0), %d0 # load old exponent |
| 6531 |
and.w &0x8000, %d0 # save old sign |
| 6532 |
or.w %d0, %d1 # {sgn,new exp} |
| 6533 |
mov.w %d1, FTEMP_EX(%a0) # insert new exponent |
| 6534 |
|
| 6535 |
bsr.l norm # normalize UNNORM |
| 6536 |
|
| 6537 |
mov.b &NORM, %d0 # return new optype tag |
| 6538 |
rts |
| 6539 |
|
| 6540 |
# |
| 6541 |
# exponent would go < 0, so only denormalize until exp = 0 |
| 6542 |
# |
| 6543 |
unnorm_nrm_zero: |
| 6544 |
cmp.b %d1, &32 # is exp <= 32? |
| 6545 |
bgt.b unnorm_nrm_zero_lrg # no; go handle large exponent |
| 6546 |
|
| 6547 |
bfextu FTEMP_HI(%a0){%d1:&32}, %d0 # extract new hi(man) |
| 6548 |
mov.l %d0, FTEMP_HI(%a0) # save new hi(man) |
| 6549 |
|
| 6550 |
mov.l FTEMP_LO(%a0), %d0 # fetch old lo(man) |
| 6551 |
lsl.l %d1, %d0 # extract new lo(man) |
| 6552 |
mov.l %d0, FTEMP_LO(%a0) # save new lo(man) |
| 6553 |
|
| 6554 |
and.w &0x8000, FTEMP_EX(%a0) # set exp = 0 |
| 6555 |
|
| 6556 |
mov.b &DENORM, %d0 # return new optype tag |
| 6557 |
rts |
| 6558 |
|
| 6559 |
# |
| 6560 |
# only mantissa bits set are in lo(man) |
| 6561 |
# |
| 6562 |
unnorm_nrm_zero_lrg: |
| 6563 |
sub.w &32, %d1 # adjust shft amt by 32 |
| 6564 |
|
| 6565 |
mov.l FTEMP_LO(%a0), %d0 # fetch old lo(man) |
| 6566 |
lsl.l %d1, %d0 # left shift lo(man) |
| 6567 |
|
| 6568 |
mov.l %d0, FTEMP_HI(%a0) # store new hi(man) |
| 6569 |
clr.l FTEMP_LO(%a0) # lo(man) = 0 |
| 6570 |
|
| 6571 |
and.w &0x8000, FTEMP_EX(%a0) # set exp = 0 |
| 6572 |
|
| 6573 |
mov.b &DENORM, %d0 # return new optype tag |
| 6574 |
rts |
| 6575 |
|
| 6576 |
# |
| 6577 |
# whole mantissa is zero so this UNNORM is actually a zero |
| 6578 |
# |
| 6579 |
unnorm_zero: |
| 6580 |
and.w &0x8000, FTEMP_EX(%a0) # force exponent to zero |
| 6581 |
|
| 6582 |
mov.b &ZERO, %d0 # fix optype tag |
| 6583 |
rts |
| 6584 |
|
| 6585 |
######################################################################### |
| 6586 |
# XDEF **************************************************************** # |
| 6587 |
# set_tag_x(): return the optype of the input ext fp number # |
| 6588 |
# # |
| 6589 |
# XREF **************************************************************** # |
| 6590 |
# None # |
| 6591 |
# # |
| 6592 |
# INPUT *************************************************************** # |
| 6593 |
# a0 = pointer to extended precision operand # |
| 6594 |
# # |
| 6595 |
# OUTPUT ************************************************************** # |
| 6596 |
# d0 = value of type tag # |
| 6597 |
# one of: NORM, INF, QNAN, SNAN, DENORM, UNNORM, ZERO # |
| 6598 |
# # |
| 6599 |
# ALGORITHM *********************************************************** # |
| 6600 |
# Simply test the exponent, j-bit, and mantissa values to # |
| 6601 |
# determine the type of operand. # |
| 6602 |
# If it's an unnormalized zero, alter the operand and force it # |
| 6603 |
# to be a normal zero. # |
| 6604 |
# # |
| 6605 |
######################################################################### |
| 6606 |
|
| 6607 |
global set_tag_x |
| 6608 |
set_tag_x: |
| 6609 |
mov.w FTEMP_EX(%a0), %d0 # extract exponent |
| 6610 |
andi.w &0x7fff, %d0 # strip off sign |
| 6611 |
cmpi.w %d0, &0x7fff # is (EXP == MAX)? |
| 6612 |
beq.b inf_or_nan_x |
| 6613 |
not_inf_or_nan_x: |
| 6614 |
btst &0x7,FTEMP_HI(%a0) |
| 6615 |
beq.b not_norm_x |
| 6616 |
is_norm_x: |
| 6617 |
mov.b &NORM, %d0 |
| 6618 |
rts |
| 6619 |
not_norm_x: |
| 6620 |
tst.w %d0 # is exponent = 0? |
| 6621 |
bne.b is_unnorm_x |
| 6622 |
not_unnorm_x: |
| 6623 |
tst.l FTEMP_HI(%a0) |
| 6624 |
bne.b is_denorm_x |
| 6625 |
tst.l FTEMP_LO(%a0) |
| 6626 |
bne.b is_denorm_x |
| 6627 |
is_zero_x: |
| 6628 |
mov.b &ZERO, %d0 |
| 6629 |
rts |
| 6630 |
is_denorm_x: |
| 6631 |
mov.b &DENORM, %d0 |
| 6632 |
rts |
| 6633 |
# must distinguish now "Unnormalized zeroes" which we |
| 6634 |
# must convert to zero. |
| 6635 |
is_unnorm_x: |
| 6636 |
tst.l FTEMP_HI(%a0) |
| 6637 |
bne.b is_unnorm_reg_x |
| 6638 |
tst.l FTEMP_LO(%a0) |
| 6639 |
bne.b is_unnorm_reg_x |
| 6640 |
# it's an "unnormalized zero". let's convert it to an actual zero... |
| 6641 |
andi.w &0x8000,FTEMP_EX(%a0) # clear exponent |
| 6642 |
mov.b &ZERO, %d0 |
| 6643 |
rts |
| 6644 |
is_unnorm_reg_x: |
| 6645 |
mov.b &UNNORM, %d0 |
| 6646 |
rts |
| 6647 |
inf_or_nan_x: |
| 6648 |
tst.l FTEMP_LO(%a0) |
| 6649 |
bne.b is_nan_x |
| 6650 |
mov.l FTEMP_HI(%a0), %d0 |
| 6651 |
and.l &0x7fffffff, %d0 # msb is a don't care! |
| 6652 |
bne.b is_nan_x |
| 6653 |
is_inf_x: |
| 6654 |
mov.b &INF, %d0 |
| 6655 |
rts |
| 6656 |
is_nan_x: |
| 6657 |
btst &0x6, FTEMP_HI(%a0) |
| 6658 |
beq.b is_snan_x |
| 6659 |
mov.b &QNAN, %d0 |
| 6660 |
rts |
| 6661 |
is_snan_x: |
| 6662 |
mov.b &SNAN, %d0 |
| 6663 |
rts |
| 6664 |
|
| 6665 |
######################################################################### |
| 6666 |
# XDEF **************************************************************** # |
| 6667 |
# set_tag_d(): return the optype of the input dbl fp number # |
| 6668 |
# # |
| 6669 |
# XREF **************************************************************** # |
| 6670 |
# None # |
| 6671 |
# # |
| 6672 |
# INPUT *************************************************************** # |
| 6673 |
# a0 = points to double precision operand # |
| 6674 |
# # |
| 6675 |
# OUTPUT ************************************************************** # |
| 6676 |
# d0 = value of type tag # |
| 6677 |
# one of: NORM, INF, QNAN, SNAN, DENORM, ZERO # |
| 6678 |
# # |
| 6679 |
# ALGORITHM *********************************************************** # |
| 6680 |
# Simply test the exponent, j-bit, and mantissa values to # |
| 6681 |
# determine the type of operand. # |
| 6682 |
# # |
| 6683 |
######################################################################### |
| 6684 |
|
| 6685 |
global set_tag_d |
| 6686 |
set_tag_d: |
| 6687 |
mov.l FTEMP(%a0), %d0 |
| 6688 |
mov.l %d0, %d1 |
| 6689 |
|
| 6690 |
andi.l &0x7ff00000, %d0 |
| 6691 |
beq.b zero_or_denorm_d |
| 6692 |
|
| 6693 |
cmpi.l %d0, &0x7ff00000 |
| 6694 |
beq.b inf_or_nan_d |
| 6695 |
|
| 6696 |
is_norm_d: |
| 6697 |
mov.b &NORM, %d0 |
| 6698 |
rts |
| 6699 |
zero_or_denorm_d: |
| 6700 |
and.l &0x000fffff, %d1 |
| 6701 |
bne is_denorm_d |
| 6702 |
tst.l 4+FTEMP(%a0) |
| 6703 |
bne is_denorm_d |
| 6704 |
is_zero_d: |
| 6705 |
mov.b &ZERO, %d0 |
| 6706 |
rts |
| 6707 |
is_denorm_d: |
| 6708 |
mov.b &DENORM, %d0 |
| 6709 |
rts |
| 6710 |
inf_or_nan_d: |
| 6711 |
and.l &0x000fffff, %d1 |
| 6712 |
bne is_nan_d |
| 6713 |
tst.l 4+FTEMP(%a0) |
| 6714 |
bne is_nan_d |
| 6715 |
is_inf_d: |
| 6716 |
mov.b &INF, %d0 |
| 6717 |
rts |
| 6718 |
is_nan_d: |
| 6719 |
btst &19, %d1 |
| 6720 |
bne is_qnan_d |
| 6721 |
is_snan_d: |
| 6722 |
mov.b &SNAN, %d0 |
| 6723 |
rts |
| 6724 |
is_qnan_d: |
| 6725 |
mov.b &QNAN, %d0 |
| 6726 |
rts |
| 6727 |
|
| 6728 |
######################################################################### |
| 6729 |
# XDEF **************************************************************** # |
| 6730 |
# set_tag_s(): return the optype of the input sgl fp number # |
| 6731 |
# # |
| 6732 |
# XREF **************************************************************** # |
| 6733 |
# None # |
| 6734 |
# # |
| 6735 |
# INPUT *************************************************************** # |
| 6736 |
# a0 = pointer to single precision operand # |
| 6737 |
# # |
| 6738 |
# OUTPUT ************************************************************** # |
| 6739 |
# d0 = value of type tag # |
| 6740 |
# one of: NORM, INF, QNAN, SNAN, DENORM, ZERO # |
| 6741 |
# # |
| 6742 |
# ALGORITHM *********************************************************** # |
| 6743 |
# Simply test the exponent, j-bit, and mantissa values to # |
| 6744 |
# determine the type of operand. # |
| 6745 |
# # |
| 6746 |
######################################################################### |
| 6747 |
|
| 6748 |
global set_tag_s |
| 6749 |
set_tag_s: |
| 6750 |
mov.l FTEMP(%a0), %d0 |
| 6751 |
mov.l %d0, %d1 |
| 6752 |
|
| 6753 |
andi.l &0x7f800000, %d0 |
| 6754 |
beq.b zero_or_denorm_s |
| 6755 |
|
| 6756 |
cmpi.l %d0, &0x7f800000 |
| 6757 |
beq.b inf_or_nan_s |
| 6758 |
|
| 6759 |
is_norm_s: |
| 6760 |
mov.b &NORM, %d0 |
| 6761 |
rts |
| 6762 |
zero_or_denorm_s: |
| 6763 |
and.l &0x007fffff, %d1 |
| 6764 |
bne is_denorm_s |
| 6765 |
is_zero_s: |
| 6766 |
mov.b &ZERO, %d0 |
| 6767 |
rts |
| 6768 |
is_denorm_s: |
| 6769 |
mov.b &DENORM, %d0 |
| 6770 |
rts |
| 6771 |
inf_or_nan_s: |
| 6772 |
and.l &0x007fffff, %d1 |
| 6773 |
bne is_nan_s |
| 6774 |
is_inf_s: |
| 6775 |
mov.b &INF, %d0 |
| 6776 |
rts |
| 6777 |
is_nan_s: |
| 6778 |
btst &22, %d1 |
| 6779 |
bne is_qnan_s |
| 6780 |
is_snan_s: |
| 6781 |
mov.b &SNAN, %d0 |
| 6782 |
rts |
| 6783 |
is_qnan_s: |
| 6784 |
mov.b &QNAN, %d0 |
| 6785 |
rts |
| 6786 |
|
| 6787 |
######################################################################### |
| 6788 |
# XDEF **************************************************************** # |
| 6789 |
# unf_res(): routine to produce default underflow result of a # |
| 6790 |
# scaled extended precision number; this is used by # |
| 6791 |
# fadd/fdiv/fmul/etc. emulation routines. # |
| 6792 |
# unf_res4(): same as above but for fsglmul/fsgldiv which use # |
| 6793 |
# single round prec and extended prec mode. # |
| 6794 |
# # |
| 6795 |
# XREF **************************************************************** # |
| 6796 |
# _denorm() - denormalize according to scale factor # |
| 6797 |
# _round() - round denormalized number according to rnd prec # |
| 6798 |
# # |
| 6799 |
# INPUT *************************************************************** # |
| 6800 |
# a0 = pointer to extended precison operand # |
| 6801 |
# d0 = scale factor # |
| 6802 |
# d1 = rounding precision/mode # |
| 6803 |
# # |
| 6804 |
# OUTPUT ************************************************************** # |
| 6805 |
# a0 = pointer to default underflow result in extended precision # |
| 6806 |
# d0.b = result FPSR_cc which caller may or may not want to save # |
| 6807 |
# # |
| 6808 |
# ALGORITHM *********************************************************** # |
| 6809 |
# Convert the input operand to "internal format" which means the # |
| 6810 |
# exponent is extended to 16 bits and the sign is stored in the unused # |
| 6811 |
# portion of the extended precison operand. Denormalize the number # |
| 6812 |
# according to the scale factor passed in d0. Then, round the # |
| 6813 |
# denormalized result. # |
| 6814 |
# Set the FPSR_exc bits as appropriate but return the cc bits in # |
| 6815 |
# d0 in case the caller doesn't want to save them (as is the case for # |
| 6816 |
# fmove out). # |
| 6817 |
# unf_res4() for fsglmul/fsgldiv forces the denorm to extended # |
| 6818 |
# precision and the rounding mode to single. # |
| 6819 |
# # |
| 6820 |
######################################################################### |
| 6821 |
global unf_res |
| 6822 |
unf_res: |
| 6823 |
mov.l %d1, -(%sp) # save rnd prec,mode on stack |
| 6824 |
|
| 6825 |
btst &0x7, FTEMP_EX(%a0) # make "internal" format |
| 6826 |
sne FTEMP_SGN(%a0) |
| 6827 |
|
| 6828 |
mov.w FTEMP_EX(%a0), %d1 # extract exponent |
| 6829 |
and.w &0x7fff, %d1 |
| 6830 |
sub.w %d0, %d1 |
| 6831 |
mov.w %d1, FTEMP_EX(%a0) # insert 16 bit exponent |
| 6832 |
|
| 6833 |
mov.l %a0, -(%sp) # save operand ptr during calls |
| 6834 |
|
| 6835 |
mov.l 0x4(%sp),%d0 # pass rnd prec. |
| 6836 |
andi.w &0x00c0,%d0 |
| 6837 |
lsr.w &0x4,%d0 |
| 6838 |
bsr.l _denorm # denorm result |
| 6839 |
|
| 6840 |
mov.l (%sp),%a0 |
| 6841 |
mov.w 0x6(%sp),%d1 # load prec:mode into %d1 |
| 6842 |
andi.w &0xc0,%d1 # extract rnd prec |
| 6843 |
lsr.w &0x4,%d1 |
| 6844 |
swap %d1 |
| 6845 |
mov.w 0x6(%sp),%d1 |
| 6846 |
andi.w &0x30,%d1 |
| 6847 |
lsr.w &0x4,%d1 |
| 6848 |
bsr.l _round # round the denorm |
| 6849 |
|
| 6850 |
mov.l (%sp)+, %a0 |
| 6851 |
|
| 6852 |
# result is now rounded properly. convert back to normal format |
| 6853 |
bclr &0x7, FTEMP_EX(%a0) # clear sgn first; may have residue |
| 6854 |
tst.b FTEMP_SGN(%a0) # is "internal result" sign set? |
| 6855 |
beq.b unf_res_chkifzero # no; result is positive |
| 6856 |
bset &0x7, FTEMP_EX(%a0) # set result sgn |
| 6857 |
clr.b FTEMP_SGN(%a0) # clear temp sign |
| 6858 |
|
| 6859 |
# the number may have become zero after rounding. set ccodes accordingly. |
| 6860 |
unf_res_chkifzero: |
| 6861 |
clr.l %d0 |
| 6862 |
tst.l FTEMP_HI(%a0) # is value now a zero? |
| 6863 |
bne.b unf_res_cont # no |
| 6864 |
tst.l FTEMP_LO(%a0) |
| 6865 |
bne.b unf_res_cont # no |
| 6866 |
# bset &z_bit, FPSR_CC(%a6) # yes; set zero ccode bit |
| 6867 |
bset &z_bit, %d0 # yes; set zero ccode bit |
| 6868 |
|
| 6869 |
unf_res_cont: |
| 6870 |
|
| 6871 |
# |
| 6872 |
# can inex1 also be set along with unfl and inex2??? |
| 6873 |
# |
| 6874 |
# we know that underflow has occurred. aunfl should be set if INEX2 is also set. |
| 6875 |
# |
| 6876 |
btst &inex2_bit, FPSR_EXCEPT(%a6) # is INEX2 set? |
| 6877 |
beq.b unf_res_end # no |
| 6878 |
bset &aunfl_bit, FPSR_AEXCEPT(%a6) # yes; set aunfl |
| 6879 |
|
| 6880 |
unf_res_end: |
| 6881 |
add.l &0x4, %sp # clear stack |
| 6882 |
rts |
| 6883 |
|
| 6884 |
# unf_res() for fsglmul() and fsgldiv(). |
| 6885 |
global unf_res4 |
| 6886 |
unf_res4: |
| 6887 |
mov.l %d1,-(%sp) # save rnd prec,mode on stack |
| 6888 |
|
| 6889 |
btst &0x7,FTEMP_EX(%a0) # make "internal" format |
| 6890 |
sne FTEMP_SGN(%a0) |
| 6891 |
|
| 6892 |
mov.w FTEMP_EX(%a0),%d1 # extract exponent |
| 6893 |
and.w &0x7fff,%d1 |
| 6894 |
sub.w %d0,%d1 |
| 6895 |
mov.w %d1,FTEMP_EX(%a0) # insert 16 bit exponent |
| 6896 |
|
| 6897 |
mov.l %a0,-(%sp) # save operand ptr during calls |
| 6898 |
|
| 6899 |
clr.l %d0 # force rnd prec = ext |
| 6900 |
bsr.l _denorm # denorm result |
| 6901 |
|
| 6902 |
mov.l (%sp),%a0 |
| 6903 |
mov.w &s_mode,%d1 # force rnd prec = sgl |
| 6904 |
swap %d1 |
| 6905 |
mov.w 0x6(%sp),%d1 # load rnd mode |
| 6906 |
andi.w &0x30,%d1 # extract rnd prec |
| 6907 |
lsr.w &0x4,%d1 |
| 6908 |
bsr.l _round # round the denorm |
| 6909 |
|
| 6910 |
mov.l (%sp)+,%a0 |
| 6911 |
|
| 6912 |
# result is now rounded properly. convert back to normal format |
| 6913 |
bclr &0x7,FTEMP_EX(%a0) # clear sgn first; may have residue |
| 6914 |
tst.b FTEMP_SGN(%a0) # is "internal result" sign set? |
| 6915 |
beq.b unf_res4_chkifzero # no; result is positive |
| 6916 |
bset &0x7,FTEMP_EX(%a0) # set result sgn |
| 6917 |
clr.b FTEMP_SGN(%a0) # clear temp sign |
| 6918 |
|
| 6919 |
# the number may have become zero after rounding. set ccodes accordingly. |
| 6920 |
unf_res4_chkifzero: |
| 6921 |
clr.l %d0 |
| 6922 |
tst.l FTEMP_HI(%a0) # is value now a zero? |
| 6923 |
bne.b unf_res4_cont # no |
| 6924 |
tst.l FTEMP_LO(%a0) |
| 6925 |
bne.b unf_res4_cont # no |
| 6926 |
# bset &z_bit,FPSR_CC(%a6) # yes; set zero ccode bit |
| 6927 |
bset &z_bit,%d0 # yes; set zero ccode bit |
| 6928 |
|
| 6929 |
unf_res4_cont: |
| 6930 |
|
| 6931 |
# |
| 6932 |
# can inex1 also be set along with unfl and inex2??? |
| 6933 |
# |
| 6934 |
# we know that underflow has occurred. aunfl should be set if INEX2 is also set. |
| 6935 |
# |
| 6936 |
btst &inex2_bit,FPSR_EXCEPT(%a6) # is INEX2 set? |
| 6937 |
beq.b unf_res4_end # no |
| 6938 |
bset &aunfl_bit,FPSR_AEXCEPT(%a6) # yes; set aunfl |
| 6939 |
|
| 6940 |
unf_res4_end: |
| 6941 |
add.l &0x4,%sp # clear stack |
| 6942 |
rts |
| 6943 |
|
| 6944 |
######################################################################### |
| 6945 |
# XDEF **************************************************************** # |
| 6946 |
# ovf_res(): routine to produce the default overflow result of # |
| 6947 |
# an overflowing number. # |
| 6948 |
# ovf_res2(): same as above but the rnd mode/prec are passed # |
| 6949 |
# differently. # |
| 6950 |
# # |
| 6951 |
# XREF **************************************************************** # |
| 6952 |
# none # |
| 6953 |
# # |
| 6954 |
# INPUT *************************************************************** # |
| 6955 |
# d1.b = '-1' => (-); '0' => (+) # |
| 6956 |
# ovf_res(): # |
| 6957 |
# d0 = rnd mode/prec # |
| 6958 |
# ovf_res2(): # |
| 6959 |
# hi(d0) = rnd prec # |
| 6960 |
# lo(d0) = rnd mode # |
| 6961 |
# # |
| 6962 |
# OUTPUT ************************************************************** # |
| 6963 |
# a0 = points to extended precision result # |
| 6964 |
# d0.b = condition code bits # |
| 6965 |
# # |
| 6966 |
# ALGORITHM *********************************************************** # |
| 6967 |
# The default overflow result can be determined by the sign of # |
| 6968 |
# the result and the rounding mode/prec in effect. These bits are # |
| 6969 |
# concatenated together to create an index into the default result # |
| 6970 |
# table. A pointer to the correct result is returned in a0. The # |
| 6971 |
# resulting condition codes are returned in d0 in case the caller # |
| 6972 |
# doesn't want FPSR_cc altered (as is the case for fmove out). # |
| 6973 |
# # |
| 6974 |
######################################################################### |
| 6975 |
|
| 6976 |
global ovf_res |
| 6977 |
ovf_res: |
| 6978 |
andi.w &0x10,%d1 # keep result sign |
| 6979 |
lsr.b &0x4,%d0 # shift prec/mode |
| 6980 |
or.b %d0,%d1 # concat the two |
| 6981 |
mov.w %d1,%d0 # make a copy |
| 6982 |
lsl.b &0x1,%d1 # multiply d1 by 2 |
| 6983 |
bra.b ovf_res_load |
| 6984 |
|
| 6985 |
global ovf_res2 |
| 6986 |
ovf_res2: |
| 6987 |
and.w &0x10, %d1 # keep result sign |
| 6988 |
or.b %d0, %d1 # insert rnd mode |
| 6989 |
swap %d0 |
| 6990 |
or.b %d0, %d1 # insert rnd prec |
| 6991 |
mov.w %d1, %d0 # make a copy |
| 6992 |
lsl.b &0x1, %d1 # shift left by 1 |
| 6993 |
|
| 6994 |
# |
| 6995 |
# use the rounding mode, precision, and result sign as in index into the |
| 6996 |
# two tables below to fetch the default result and the result ccodes. |
| 6997 |
# |
| 6998 |
ovf_res_load: |
| 6999 |
mov.b (tbl_ovfl_cc.b,%pc,%d0.w*1), %d0 # fetch result ccodes |
| 7000 |
lea (tbl_ovfl_result.b,%pc,%d1.w*8), %a0 # return result ptr |
| 7001 |
|
| 7002 |
rts |
| 7003 |
|
| 7004 |
tbl_ovfl_cc: |
| 7005 |
byte 0x2, 0x0, 0x0, 0x2 |
| 7006 |
byte 0x2, 0x0, 0x0, 0x2 |
| 7007 |
byte 0x2, 0x0, 0x0, 0x2 |
| 7008 |
byte 0x0, 0x0, 0x0, 0x0 |
| 7009 |
byte 0x2+0x8, 0x8, 0x2+0x8, 0x8 |
| 7010 |
byte 0x2+0x8, 0x8, 0x2+0x8, 0x8 |
| 7011 |
byte 0x2+0x8, 0x8, 0x2+0x8, 0x8 |
| 7012 |
|
| 7013 |
tbl_ovfl_result: |
| 7014 |
long 0x7fff0000,0x00000000,0x00000000,0x00000000 # +INF; RN |
| 7015 |
long 0x7ffe0000,0xffffffff,0xffffffff,0x00000000 # +EXT; RZ |
| 7016 |
long 0x7ffe0000,0xffffffff,0xffffffff,0x00000000 # +EXT; RM |
| 7017 |
long 0x7fff0000,0x00000000,0x00000000,0x00000000 # +INF; RP |
| 7018 |
|
| 7019 |
long 0x7fff0000,0x00000000,0x00000000,0x00000000 # +INF; RN |
| 7020 |
long 0x407e0000,0xffffff00,0x00000000,0x00000000 # +SGL; RZ |
| 7021 |
long 0x407e0000,0xffffff00,0x00000000,0x00000000 # +SGL; RM |
| 7022 |
long 0x7fff0000,0x00000000,0x00000000,0x00000000 # +INF; RP |
| 7023 |
|
| 7024 |
long 0x7fff0000,0x00000000,0x00000000,0x00000000 # +INF; RN |
| 7025 |
long 0x43fe0000,0xffffffff,0xfffff800,0x00000000 # +DBL; RZ |
| 7026 |
long 0x43fe0000,0xffffffff,0xfffff800,0x00000000 # +DBL; RM |
| 7027 |
long 0x7fff0000,0x00000000,0x00000000,0x00000000 # +INF; RP |
| 7028 |
|
| 7029 |
long 0x00000000,0x00000000,0x00000000,0x00000000 |
| 7030 |
long 0x00000000,0x00000000,0x00000000,0x00000000 |
| 7031 |
long 0x00000000,0x00000000,0x00000000,0x00000000 |
| 7032 |
long 0x00000000,0x00000000,0x00000000,0x00000000 |
| 7033 |
|
| 7034 |
long 0xffff0000,0x00000000,0x00000000,0x00000000 # -INF; RN |
| 7035 |
long 0xfffe0000,0xffffffff,0xffffffff,0x00000000 # -EXT; RZ |
| 7036 |
long 0xffff0000,0x00000000,0x00000000,0x00000000 # -INF; RM |
| 7037 |
long 0xfffe0000,0xffffffff,0xffffffff,0x00000000 # -EXT; RP |
| 7038 |
|
| 7039 |
long 0xffff0000,0x00000000,0x00000000,0x00000000 # -INF; RN |
| 7040 |
long 0xc07e0000,0xffffff00,0x00000000,0x00000000 # -SGL; RZ |
| 7041 |
long 0xffff0000,0x00000000,0x00000000,0x00000000 # -INF; RM |
| 7042 |
long 0xc07e0000,0xffffff00,0x00000000,0x00000000 # -SGL; RP |
| 7043 |
|
| 7044 |
long 0xffff0000,0x00000000,0x00000000,0x00000000 # -INF; RN |
| 7045 |
long 0xc3fe0000,0xffffffff,0xfffff800,0x00000000 # -DBL; RZ |
| 7046 |
long 0xffff0000,0x00000000,0x00000000,0x00000000 # -INF; RM |
| 7047 |
long 0xc3fe0000,0xffffffff,0xfffff800,0x00000000 # -DBL; RP |
| 7048 |
|
| 7049 |
######################################################################### |
| 7050 |
# XDEF **************************************************************** # |
| 7051 |
# fout(): move from fp register to memory or data register # |
| 7052 |
# # |
| 7053 |
# XREF **************************************************************** # |
| 7054 |
# _round() - needed to create EXOP for sgl/dbl precision # |
| 7055 |
# norm() - needed to create EXOP for extended precision # |
| 7056 |
# ovf_res() - create default overflow result for sgl/dbl precision# |
| 7057 |
# unf_res() - create default underflow result for sgl/dbl prec. # |
| 7058 |
# dst_dbl() - create rounded dbl precision result. # |
| 7059 |
# dst_sgl() - create rounded sgl precision result. # |
| 7060 |
# fetch_dreg() - fetch dynamic k-factor reg for packed. # |
| 7061 |
# bindec() - convert FP binary number to packed number. # |
| 7062 |
# _mem_write() - write data to memory. # |
| 7063 |
# _mem_write2() - write data to memory unless supv mode -(a7) exc.# |
| 7064 |
# _dmem_write_{byte,word,long}() - write data to memory. # |
| 7065 |
# store_dreg_{b,w,l}() - store data to data register file. # |
| 7066 |
# facc_out_{b,w,l,d,x}() - data access error occurred. # |
| 7067 |
# # |
| 7068 |
# INPUT *************************************************************** # |
| 7069 |
# a0 = pointer to extended precision source operand # |
| 7070 |
# d0 = round prec,mode # |
| 7071 |
# # |
| 7072 |
# OUTPUT ************************************************************** # |
| 7073 |
# fp0 : intermediate underflow or overflow result if # |
| 7074 |
# OVFL/UNFL occurred for a sgl or dbl operand # |
| 7075 |
# # |
| 7076 |
# ALGORITHM *********************************************************** # |
| 7077 |
# This routine is accessed by many handlers that need to do an # |
| 7078 |
# opclass three move of an operand out to memory. # |
| 7079 |
# Decode an fmove out (opclass 3) instruction to determine if # |
| 7080 |
# it's b,w,l,s,d,x, or p in size. b,w,l can be stored to either a data # |
| 7081 |
# register or memory. The algorithm uses a standard "fmove" to create # |
| 7082 |
# the rounded result. Also, since exceptions are disabled, this also # |
| 7083 |
# create the correct OPERR default result if appropriate. # |
| 7084 |
# For sgl or dbl precision, overflow or underflow can occur. If # |
| 7085 |
# either occurs and is enabled, the EXOP. # |
| 7086 |
# For extended precision, the stacked <ea> must be fixed along # |
| 7087 |
# w/ the address index register as appropriate w/ _calc_ea_fout(). If # |
| 7088 |
# the source is a denorm and if underflow is enabled, an EXOP must be # |
| 7089 |
# created. # |
| 7090 |
# For packed, the k-factor must be fetched from the instruction # |
| 7091 |
# word or a data register. The <ea> must be fixed as w/ extended # |
| 7092 |
# precision. Then, bindec() is called to create the appropriate # |
| 7093 |
# packed result. # |
| 7094 |
# If at any time an access error is flagged by one of the move- # |
| 7095 |
# to-memory routines, then a special exit must be made so that the # |
| 7096 |
# access error can be handled properly. # |
| 7097 |
# # |
| 7098 |
######################################################################### |
| 7099 |
|
| 7100 |
global fout |
| 7101 |
fout: |
| 7102 |
bfextu EXC_CMDREG(%a6){&3:&3},%d1 # extract dst fmt |
| 7103 |
mov.w (tbl_fout.b,%pc,%d1.w*2),%a1 # use as index |
| 7104 |
jmp (tbl_fout.b,%pc,%a1) # jump to routine |
| 7105 |
|
| 7106 |
swbeg &0x8 |
| 7107 |
tbl_fout: |
| 7108 |
short fout_long - tbl_fout |
| 7109 |
short fout_sgl - tbl_fout |
| 7110 |
short fout_ext - tbl_fout |
| 7111 |
short fout_pack - tbl_fout |
| 7112 |
short fout_word - tbl_fout |
| 7113 |
short fout_dbl - tbl_fout |
| 7114 |
short fout_byte - tbl_fout |
| 7115 |
short fout_pack - tbl_fout |
| 7116 |
|
| 7117 |
################################################################# |
| 7118 |
# fmove.b out ################################################### |
| 7119 |
################################################################# |
| 7120 |
|
| 7121 |
# Only "Unimplemented Data Type" exceptions enter here. The operand |
| 7122 |
# is either a DENORM or a NORM. |
| 7123 |
fout_byte: |
| 7124 |
tst.b STAG(%a6) # is operand normalized? |
| 7125 |
bne.b fout_byte_denorm # no |
| 7126 |
|
| 7127 |
fmovm.x SRC(%a0),&0x80 # load value |
| 7128 |
|
| 7129 |
fout_byte_norm: |
| 7130 |
fmov.l %d0,%fpcr # insert rnd prec,mode |
| 7131 |
|
| 7132 |
fmov.b %fp0,%d0 # exec move out w/ correct rnd mode |
| 7133 |
|
| 7134 |
fmov.l &0x0,%fpcr # clear FPCR |
| 7135 |
fmov.l %fpsr,%d1 # fetch FPSR |
| 7136 |
or.w %d1,2+USER_FPSR(%a6) # save new exc,accrued bits |
| 7137 |
|
| 7138 |
mov.b 1+EXC_OPWORD(%a6),%d1 # extract dst mode |
| 7139 |
andi.b &0x38,%d1 # is mode == 0? (Dreg dst) |
| 7140 |
beq.b fout_byte_dn # must save to integer regfile |
| 7141 |
|
| 7142 |
mov.l EXC_EA(%a6),%a0 # stacked <ea> is correct |
| 7143 |
bsr.l _dmem_write_byte # write byte |
| 7144 |
|
| 7145 |
tst.l %d1 # did dstore fail? |
| 7146 |
bne.l facc_out_b # yes |
| 7147 |
|
| 7148 |
rts |
| 7149 |
|
| 7150 |
fout_byte_dn: |
| 7151 |
mov.b 1+EXC_OPWORD(%a6),%d1 # extract Dn |
| 7152 |
andi.w &0x7,%d1 |
| 7153 |
bsr.l store_dreg_b |
| 7154 |
rts |
| 7155 |
|
| 7156 |
fout_byte_denorm: |
| 7157 |
mov.l SRC_EX(%a0),%d1 |
| 7158 |
andi.l &0x80000000,%d1 # keep DENORM sign |
| 7159 |
ori.l &0x00800000,%d1 # make smallest sgl |
| 7160 |
fmov.s %d1,%fp0 |
| 7161 |
bra.b fout_byte_norm |
| 7162 |
|
| 7163 |
################################################################# |
| 7164 |
# fmove.w out ################################################### |
| 7165 |
################################################################# |
| 7166 |
|
| 7167 |
# Only "Unimplemented Data Type" exceptions enter here. The operand |
| 7168 |
# is either a DENORM or a NORM. |
| 7169 |
fout_word: |
| 7170 |
tst.b STAG(%a6) # is operand normalized? |
| 7171 |
bne.b fout_word_denorm # no |
| 7172 |
|
| 7173 |
fmovm.x SRC(%a0),&0x80 # load value |
| 7174 |
|
| 7175 |
fout_word_norm: |
| 7176 |
fmov.l %d0,%fpcr # insert rnd prec:mode |
| 7177 |
|
| 7178 |
fmov.w %fp0,%d0 # exec move out w/ correct rnd mode |
| 7179 |
|
| 7180 |
fmov.l &0x0,%fpcr # clear FPCR |
| 7181 |
fmov.l %fpsr,%d1 # fetch FPSR |
| 7182 |
or.w %d1,2+USER_FPSR(%a6) # save new exc,accrued bits |
| 7183 |
|
| 7184 |
mov.b 1+EXC_OPWORD(%a6),%d1 # extract dst mode |
| 7185 |
andi.b &0x38,%d1 # is mode == 0? (Dreg dst) |
| 7186 |
beq.b fout_word_dn # must save to integer regfile |
| 7187 |
|
| 7188 |
mov.l EXC_EA(%a6),%a0 # stacked <ea> is correct |
| 7189 |
bsr.l _dmem_write_word # write word |
| 7190 |
|
| 7191 |
tst.l %d1 # did dstore fail? |
| 7192 |
bne.l facc_out_w # yes |
| 7193 |
|
| 7194 |
rts |
| 7195 |
|
| 7196 |
fout_word_dn: |
| 7197 |
mov.b 1+EXC_OPWORD(%a6),%d1 # extract Dn |
| 7198 |
andi.w &0x7,%d1 |
| 7199 |
bsr.l store_dreg_w |
| 7200 |
rts |
| 7201 |
|
| 7202 |
fout_word_denorm: |
| 7203 |
mov.l SRC_EX(%a0),%d1 |
| 7204 |
andi.l &0x80000000,%d1 # keep DENORM sign |
| 7205 |
ori.l &0x00800000,%d1 # make smallest sgl |
| 7206 |
fmov.s %d1,%fp0 |
| 7207 |
bra.b fout_word_norm |
| 7208 |
|
| 7209 |
################################################################# |
| 7210 |
# fmove.l out ################################################### |
| 7211 |
################################################################# |
| 7212 |
|
| 7213 |
# Only "Unimplemented Data Type" exceptions enter here. The operand |
| 7214 |
# is either a DENORM or a NORM. |
| 7215 |
fout_long: |
| 7216 |
tst.b STAG(%a6) # is operand normalized? |
| 7217 |
bne.b fout_long_denorm # no |
| 7218 |
|
| 7219 |
fmovm.x SRC(%a0),&0x80 # load value |
| 7220 |
|
| 7221 |
fout_long_norm: |
| 7222 |
fmov.l %d0,%fpcr # insert rnd prec:mode |
| 7223 |
|
| 7224 |
fmov.l %fp0,%d0 # exec move out w/ correct rnd mode |
| 7225 |
|
| 7226 |
fmov.l &0x0,%fpcr # clear FPCR |
| 7227 |
fmov.l %fpsr,%d1 # fetch FPSR |
| 7228 |
or.w %d1,2+USER_FPSR(%a6) # save new exc,accrued bits |
| 7229 |
|
| 7230 |
fout_long_write: |
| 7231 |
mov.b 1+EXC_OPWORD(%a6),%d1 # extract dst mode |
| 7232 |
andi.b &0x38,%d1 # is mode == 0? (Dreg dst) |
| 7233 |
beq.b fout_long_dn # must save to integer regfile |
| 7234 |
|
| 7235 |
mov.l EXC_EA(%a6),%a0 # stacked <ea> is correct |
| 7236 |
bsr.l _dmem_write_long # write long |
| 7237 |
|
| 7238 |
tst.l %d1 # did dstore fail? |
| 7239 |
bne.l facc_out_l # yes |
| 7240 |
|
| 7241 |
rts |
| 7242 |
|
| 7243 |
fout_long_dn: |
| 7244 |
mov.b 1+EXC_OPWORD(%a6),%d1 # extract Dn |
| 7245 |
andi.w &0x7,%d1 |
| 7246 |
bsr.l store_dreg_l |
| 7247 |
rts |
| 7248 |
|
| 7249 |
fout_long_denorm: |
| 7250 |
mov.l SRC_EX(%a0),%d1 |
| 7251 |
andi.l &0x80000000,%d1 # keep DENORM sign |
| 7252 |
ori.l &0x00800000,%d1 # make smallest sgl |
| 7253 |
fmov.s %d1,%fp0 |
| 7254 |
bra.b fout_long_norm |
| 7255 |
|
| 7256 |
################################################################# |
| 7257 |
# fmove.x out ################################################### |
| 7258 |
################################################################# |
| 7259 |
|
| 7260 |
# Only "Unimplemented Data Type" exceptions enter here. The operand |
| 7261 |
# is either a DENORM or a NORM. |
| 7262 |
# The DENORM causes an Underflow exception. |
| 7263 |
fout_ext: |
| 7264 |
|
| 7265 |
# we copy the extended precision result to FP_SCR0 so that the reserved |
| 7266 |
# 16-bit field gets zeroed. we do this since we promise not to disturb |
| 7267 |
# what's at SRC(a0). |
| 7268 |
mov.w SRC_EX(%a0),FP_SCR0_EX(%a6) |
| 7269 |
clr.w 2+FP_SCR0_EX(%a6) # clear reserved field |
| 7270 |
mov.l SRC_HI(%a0),FP_SCR0_HI(%a6) |
| 7271 |
mov.l SRC_LO(%a0),FP_SCR0_LO(%a6) |
| 7272 |
|
| 7273 |
fmovm.x SRC(%a0),&0x80 # return result |
| 7274 |
|
| 7275 |
bsr.l _calc_ea_fout # fix stacked <ea> |
| 7276 |
|
| 7277 |
mov.l %a0,%a1 # pass: dst addr |
| 7278 |
lea FP_SCR0(%a6),%a0 # pass: src addr |
| 7279 |
mov.l &0xc,%d0 # pass: opsize is 12 bytes |
| 7280 |
|
| 7281 |
# we must not yet write the extended precision data to the stack |
| 7282 |
# in the pre-decrement case from supervisor mode or else we'll corrupt |
| 7283 |
# the stack frame. so, leave it in FP_SRC for now and deal with it later... |
| 7284 |
cmpi.b SPCOND_FLG(%a6),&mda7_flg |
| 7285 |
beq.b fout_ext_a7 |
| 7286 |
|
| 7287 |
bsr.l _dmem_write # write ext prec number to memory |
| 7288 |
|
| 7289 |
tst.l %d1 # did dstore fail? |
| 7290 |
bne.w fout_ext_err # yes |
| 7291 |
|
| 7292 |
tst.b STAG(%a6) # is operand normalized? |
| 7293 |
bne.b fout_ext_denorm # no |
| 7294 |
rts |
| 7295 |
|
| 7296 |
# the number is a DENORM. must set the underflow exception bit |
| 7297 |
fout_ext_denorm: |
| 7298 |
bset &unfl_bit,FPSR_EXCEPT(%a6) # set underflow exc bit |
| 7299 |
|
| 7300 |
mov.b FPCR_ENABLE(%a6),%d0 |
| 7301 |
andi.b &0x0a,%d0 # is UNFL or INEX enabled? |
| 7302 |
bne.b fout_ext_exc # yes |
| 7303 |
rts |
| 7304 |
|
| 7305 |
# we don't want to do the write if the exception occurred in supervisor mode |
| 7306 |
# so _mem_write2() handles this for us. |
| 7307 |
fout_ext_a7: |
| 7308 |
bsr.l _mem_write2 # write ext prec number to memory |
| 7309 |
|
| 7310 |
tst.l %d1 # did dstore fail? |
| 7311 |
bne.w fout_ext_err # yes |
| 7312 |
|
| 7313 |
tst.b STAG(%a6) # is operand normalized? |
| 7314 |
bne.b fout_ext_denorm # no |
| 7315 |
rts |
| 7316 |
|
| 7317 |
fout_ext_exc: |
| 7318 |
lea FP_SCR0(%a6),%a0 |
| 7319 |
bsr.l norm # normalize the mantissa |
| 7320 |
neg.w %d0 # new exp = -(shft amt) |
| 7321 |
andi.w &0x7fff,%d0 |
| 7322 |
andi.w &0x8000,FP_SCR0_EX(%a6) # keep only old sign |
| 7323 |
or.w %d0,FP_SCR0_EX(%a6) # insert new exponent |
| 7324 |
fmovm.x FP_SCR0(%a6),&0x40 # return EXOP in fp1 |
| 7325 |
rts |
| 7326 |
|
| 7327 |
fout_ext_err: |
| 7328 |
mov.l EXC_A6(%a6),(%a6) # fix stacked a6 |
| 7329 |
bra.l facc_out_x |
| 7330 |
|
| 7331 |
######################################################################### |
| 7332 |
# fmove.s out ########################################################### |
| 7333 |
######################################################################### |
| 7334 |
fout_sgl: |
| 7335 |
andi.b &0x30,%d0 # clear rnd prec |
| 7336 |
ori.b &s_mode*0x10,%d0 # insert sgl prec |
| 7337 |
mov.l %d0,L_SCR3(%a6) # save rnd prec,mode on stack |
| 7338 |
|
| 7339 |
# |
| 7340 |
# operand is a normalized number. first, we check to see if the move out |
| 7341 |
# would cause either an underflow or overflow. these cases are handled |
| 7342 |
# separately. otherwise, set the FPCR to the proper rounding mode and |
| 7343 |
# execute the move. |
| 7344 |
# |
| 7345 |
mov.w SRC_EX(%a0),%d0 # extract exponent |
| 7346 |
andi.w &0x7fff,%d0 # strip sign |
| 7347 |
|
| 7348 |
cmpi.w %d0,&SGL_HI # will operand overflow? |
| 7349 |
bgt.w fout_sgl_ovfl # yes; go handle OVFL |
| 7350 |
beq.w fout_sgl_may_ovfl # maybe; go handle possible OVFL |
| 7351 |
cmpi.w %d0,&SGL_LO # will operand underflow? |
| 7352 |
blt.w fout_sgl_unfl # yes; go handle underflow |
| 7353 |
|
| 7354 |
# |
| 7355 |
# NORMs(in range) can be stored out by a simple "fmov.s" |
| 7356 |
# Unnormalized inputs can come through this point. |
| 7357 |
# |
| 7358 |
fout_sgl_exg: |
| 7359 |
fmovm.x SRC(%a0),&0x80 # fetch fop from stack |
| 7360 |
|
| 7361 |
fmov.l L_SCR3(%a6),%fpcr # set FPCR |
| 7362 |
fmov.l &0x0,%fpsr # clear FPSR |
| 7363 |
|
| 7364 |
fmov.s %fp0,%d0 # store does convert and round |
| 7365 |
|
| 7366 |
fmov.l &0x0,%fpcr # clear FPCR |
| 7367 |
fmov.l %fpsr,%d1 # save FPSR |
| 7368 |
|
| 7369 |
or.w %d1,2+USER_FPSR(%a6) # set possible inex2/ainex |
| 7370 |
|
| 7371 |
fout_sgl_exg_write: |
| 7372 |
mov.b 1+EXC_OPWORD(%a6),%d1 # extract dst mode |
| 7373 |
andi.b &0x38,%d1 # is mode == 0? (Dreg dst) |
| 7374 |
beq.b fout_sgl_exg_write_dn # must save to integer regfile |
| 7375 |
|
| 7376 |
mov.l EXC_EA(%a6),%a0 # stacked <ea> is correct |
| 7377 |
bsr.l _dmem_write_long # write long |
| 7378 |
|
| 7379 |
tst.l %d1 # did dstore fail? |
| 7380 |
bne.l facc_out_l # yes |
| 7381 |
|
| 7382 |
rts |
| 7383 |
|
| 7384 |
fout_sgl_exg_write_dn: |
| 7385 |
mov.b 1+EXC_OPWORD(%a6),%d1 # extract Dn |
| 7386 |
andi.w &0x7,%d1 |
| 7387 |
bsr.l store_dreg_l |
| 7388 |
rts |
| 7389 |
|
| 7390 |
# |
| 7391 |
# here, we know that the operand would UNFL if moved out to single prec, |
| 7392 |
# so, denorm and round and then use generic store single routine to |
| 7393 |
# write the value to memory. |
| 7394 |
# |
| 7395 |
fout_sgl_unfl: |
| 7396 |
bset &unfl_bit,FPSR_EXCEPT(%a6) # set UNFL |
| 7397 |
|
| 7398 |
mov.w SRC_EX(%a0),FP_SCR0_EX(%a6) |
| 7399 |
mov.l SRC_HI(%a0),FP_SCR0_HI(%a6) |
| 7400 |
mov.l SRC_LO(%a0),FP_SCR0_LO(%a6) |
| 7401 |
mov.l %a0,-(%sp) |
| 7402 |
|
| 7403 |
clr.l %d0 # pass: S.F. = 0 |
| 7404 |
|
| 7405 |
cmpi.b STAG(%a6),&DENORM # fetch src optype tag |
| 7406 |
bne.b fout_sgl_unfl_cont # let DENORMs fall through |
| 7407 |
|
| 7408 |
lea FP_SCR0(%a6),%a0 |
| 7409 |
bsr.l norm # normalize the DENORM |
| 7410 |
|
| 7411 |
fout_sgl_unfl_cont: |
| 7412 |
lea FP_SCR0(%a6),%a0 # pass: ptr to operand |
| 7413 |
mov.l L_SCR3(%a6),%d1 # pass: rnd prec,mode |
| 7414 |
bsr.l unf_res # calc default underflow result |
| 7415 |
|
| 7416 |
lea FP_SCR0(%a6),%a0 # pass: ptr to fop |
| 7417 |
bsr.l dst_sgl # convert to single prec |
| 7418 |
|
| 7419 |
mov.b 1+EXC_OPWORD(%a6),%d1 # extract dst mode |
| 7420 |
andi.b &0x38,%d1 # is mode == 0? (Dreg dst) |
| 7421 |
beq.b fout_sgl_unfl_dn # must save to integer regfile |
| 7422 |
|
| 7423 |
mov.l EXC_EA(%a6),%a0 # stacked <ea> is correct |
| 7424 |
bsr.l _dmem_write_long # write long |
| 7425 |
|
| 7426 |
tst.l %d1 # did dstore fail? |
| 7427 |
bne.l facc_out_l # yes |
| 7428 |
|
| 7429 |
bra.b fout_sgl_unfl_chkexc |
| 7430 |
|
| 7431 |
fout_sgl_unfl_dn: |
| 7432 |
mov.b 1+EXC_OPWORD(%a6),%d1 # extract Dn |
| 7433 |
andi.w &0x7,%d1 |
| 7434 |
bsr.l store_dreg_l |
| 7435 |
|
| 7436 |
fout_sgl_unfl_chkexc: |
| 7437 |
mov.b FPCR_ENABLE(%a6),%d1 |
| 7438 |
andi.b &0x0a,%d1 # is UNFL or INEX enabled? |
| 7439 |
bne.w fout_sd_exc_unfl # yes |
| 7440 |
addq.l &0x4,%sp |
| 7441 |
rts |
| 7442 |
|
| 7443 |
# |
| 7444 |
# it's definitely an overflow so call ovf_res to get the correct answer |
| 7445 |
# |
| 7446 |
fout_sgl_ovfl: |
| 7447 |
tst.b 3+SRC_HI(%a0) # is result inexact? |
| 7448 |
bne.b fout_sgl_ovfl_inex2 |
| 7449 |
tst.l SRC_LO(%a0) # is result inexact? |
| 7450 |
bne.b fout_sgl_ovfl_inex2 |
| 7451 |
ori.w &ovfl_inx_mask,2+USER_FPSR(%a6) # set ovfl/aovfl/ainex |
| 7452 |
bra.b fout_sgl_ovfl_cont |
| 7453 |
fout_sgl_ovfl_inex2: |
| 7454 |
ori.w &ovfinx_mask,2+USER_FPSR(%a6) # set ovfl/aovfl/ainex/inex2 |
| 7455 |
|
| 7456 |
fout_sgl_ovfl_cont: |
| 7457 |
mov.l %a0,-(%sp) |
| 7458 |
|
| 7459 |
# call ovf_res() w/ sgl prec and the correct rnd mode to create the default |
| 7460 |
# overflow result. DON'T save the returned ccodes from ovf_res() since |
| 7461 |
# fmove out doesn't alter them. |
| 7462 |
tst.b SRC_EX(%a0) # is operand negative? |
| 7463 |
smi %d1 # set if so |
| 7464 |
mov.l L_SCR3(%a6),%d0 # pass: sgl prec,rnd mode |
| 7465 |
bsr.l ovf_res # calc OVFL result |
| 7466 |
fmovm.x (%a0),&0x80 # load default overflow result |
| 7467 |
fmov.s %fp0,%d0 # store to single |
| 7468 |
|
| 7469 |
mov.b 1+EXC_OPWORD(%a6),%d1 # extract dst mode |
| 7470 |
andi.b &0x38,%d1 # is mode == 0? (Dreg dst) |
| 7471 |
beq.b fout_sgl_ovfl_dn # must save to integer regfile |
| 7472 |
|
| 7473 |
mov.l EXC_EA(%a6),%a0 # stacked <ea> is correct |
| 7474 |
bsr.l _dmem_write_long # write long |
| 7475 |
|
| 7476 |
tst.l %d1 # did dstore fail? |
| 7477 |
bne.l facc_out_l # yes |
| 7478 |
|
| 7479 |
bra.b fout_sgl_ovfl_chkexc |
| 7480 |
|
| 7481 |
fout_sgl_ovfl_dn: |
| 7482 |
mov.b 1+EXC_OPWORD(%a6),%d1 # extract Dn |
| 7483 |
andi.w &0x7,%d1 |
| 7484 |
bsr.l store_dreg_l |
| 7485 |
|
| 7486 |
fout_sgl_ovfl_chkexc: |
| 7487 |
mov.b FPCR_ENABLE(%a6),%d1 |
| 7488 |
andi.b &0x0a,%d1 # is UNFL or INEX enabled? |
| 7489 |
bne.w fout_sd_exc_ovfl # yes |
| 7490 |
addq.l &0x4,%sp |
| 7491 |
rts |
| 7492 |
|
| 7493 |
# |
| 7494 |
# move out MAY overflow: |
| 7495 |
# (1) force the exp to 0x3fff |
| 7496 |
# (2) do a move w/ appropriate rnd mode |
| 7497 |
# (3) if exp still equals zero, then insert original exponent |
| 7498 |
# for the correct result. |
| 7499 |
# if exp now equals one, then it overflowed so call ovf_res. |
| 7500 |
# |
| 7501 |
fout_sgl_may_ovfl: |
| 7502 |
mov.w SRC_EX(%a0),%d1 # fetch current sign |
| 7503 |
andi.w &0x8000,%d1 # keep it,clear exp |
| 7504 |
ori.w &0x3fff,%d1 # insert exp = 0 |
| 7505 |
mov.w %d1,FP_SCR0_EX(%a6) # insert scaled exp |
| 7506 |
mov.l SRC_HI(%a0),FP_SCR0_HI(%a6) # copy hi(man) |
| 7507 |
mov.l SRC_LO(%a0),FP_SCR0_LO(%a6) # copy lo(man) |
| 7508 |
|
| 7509 |
fmov.l L_SCR3(%a6),%fpcr # set FPCR |
| 7510 |
|
| 7511 |
fmov.x FP_SCR0(%a6),%fp0 # force fop to be rounded |
| 7512 |
fmov.l &0x0,%fpcr # clear FPCR |
| 7513 |
|
| 7514 |
fabs.x %fp0 # need absolute value |
| 7515 |
fcmp.b %fp0,&0x2 # did exponent increase? |
| 7516 |
fblt.w fout_sgl_exg # no; go finish NORM |
| 7517 |
bra.w fout_sgl_ovfl # yes; go handle overflow |
| 7518 |
|
| 7519 |
################ |
| 7520 |
|
| 7521 |
fout_sd_exc_unfl: |
| 7522 |
mov.l (%sp)+,%a0 |
| 7523 |
|
| 7524 |
mov.w SRC_EX(%a0),FP_SCR0_EX(%a6) |
| 7525 |
mov.l SRC_HI(%a0),FP_SCR0_HI(%a6) |
| 7526 |
mov.l SRC_LO(%a0),FP_SCR0_LO(%a6) |
| 7527 |
|
| 7528 |
cmpi.b STAG(%a6),&DENORM # was src a DENORM? |
| 7529 |
bne.b fout_sd_exc_cont # no |
| 7530 |
|
| 7531 |
lea FP_SCR0(%a6),%a0 |
| 7532 |
bsr.l norm |
| 7533 |
neg.l %d0 |
| 7534 |
andi.w &0x7fff,%d0 |
| 7535 |
bfins %d0,FP_SCR0_EX(%a6){&1:&15} |
| 7536 |
bra.b fout_sd_exc_cont |
| 7537 |
|
| 7538 |
fout_sd_exc: |
| 7539 |
fout_sd_exc_ovfl: |
| 7540 |
mov.l (%sp)+,%a0 # restore a0 |
| 7541 |
|
| 7542 |
mov.w SRC_EX(%a0),FP_SCR0_EX(%a6) |
| 7543 |
mov.l SRC_HI(%a0),FP_SCR0_HI(%a6) |
| 7544 |
mov.l SRC_LO(%a0),FP_SCR0_LO(%a6) |
| 7545 |
|
| 7546 |
fout_sd_exc_cont: |
| 7547 |
bclr &0x7,FP_SCR0_EX(%a6) # clear sign bit |
| 7548 |
sne.b 2+FP_SCR0_EX(%a6) # set internal sign bit |
| 7549 |
lea FP_SCR0(%a6),%a0 # pass: ptr to DENORM |
| 7550 |
|
| 7551 |
mov.b 3+L_SCR3(%a6),%d1 |
| 7552 |
lsr.b &0x4,%d1 |
| 7553 |
andi.w &0x0c,%d1 |
| 7554 |
swap %d1 |
| 7555 |
mov.b 3+L_SCR3(%a6),%d1 |
| 7556 |
lsr.b &0x4,%d1 |
| 7557 |
andi.w &0x03,%d1 |
| 7558 |
clr.l %d0 # pass: zero g,r,s |
| 7559 |
bsr.l _round # round the DENORM |
| 7560 |
|
| 7561 |
tst.b 2+FP_SCR0_EX(%a6) # is EXOP negative? |
| 7562 |
beq.b fout_sd_exc_done # no |
| 7563 |
bset &0x7,FP_SCR0_EX(%a6) # yes |
| 7564 |
|
| 7565 |
fout_sd_exc_done: |
| 7566 |
fmovm.x FP_SCR0(%a6),&0x40 # return EXOP in fp1 |
| 7567 |
rts |
| 7568 |
|
| 7569 |
################################################################# |
| 7570 |
# fmove.d out ################################################### |
| 7571 |
################################################################# |
| 7572 |
fout_dbl: |
| 7573 |
andi.b &0x30,%d0 # clear rnd prec |
| 7574 |
ori.b &d_mode*0x10,%d0 # insert dbl prec |
| 7575 |
mov.l %d0,L_SCR3(%a6) # save rnd prec,mode on stack |
| 7576 |
|
| 7577 |
# |
| 7578 |
# operand is a normalized number. first, we check to see if the move out |
| 7579 |
# would cause either an underflow or overflow. these cases are handled |
| 7580 |
# separately. otherwise, set the FPCR to the proper rounding mode and |
| 7581 |
# execute the move. |
| 7582 |
# |
| 7583 |
mov.w SRC_EX(%a0),%d0 # extract exponent |
| 7584 |
andi.w &0x7fff,%d0 # strip sign |
| 7585 |
|
| 7586 |
cmpi.w %d0,&DBL_HI # will operand overflow? |
| 7587 |
bgt.w fout_dbl_ovfl # yes; go handle OVFL |
| 7588 |
beq.w fout_dbl_may_ovfl # maybe; go handle possible OVFL |
| 7589 |
cmpi.w %d0,&DBL_LO # will operand underflow? |
| 7590 |
blt.w fout_dbl_unfl # yes; go handle underflow |
| 7591 |
|
| 7592 |
# |
| 7593 |
# NORMs(in range) can be stored out by a simple "fmov.d" |
| 7594 |
# Unnormalized inputs can come through this point. |
| 7595 |
# |
| 7596 |
fout_dbl_exg: |
| 7597 |
fmovm.x SRC(%a0),&0x80 # fetch fop from stack |
| 7598 |
|
| 7599 |
fmov.l L_SCR3(%a6),%fpcr # set FPCR |
| 7600 |
fmov.l &0x0,%fpsr # clear FPSR |
| 7601 |
|
| 7602 |
fmov.d %fp0,L_SCR1(%a6) # store does convert and round |
| 7603 |
|
| 7604 |
fmov.l &0x0,%fpcr # clear FPCR |
| 7605 |
fmov.l %fpsr,%d0 # save FPSR |
| 7606 |
|
| 7607 |
or.w %d0,2+USER_FPSR(%a6) # set possible inex2/ainex |
| 7608 |
|
| 7609 |
mov.l EXC_EA(%a6),%a1 # pass: dst addr |
| 7610 |
lea L_SCR1(%a6),%a0 # pass: src addr |
| 7611 |
movq.l &0x8,%d0 # pass: opsize is 8 bytes |
| 7612 |
bsr.l _dmem_write # store dbl fop to memory |
| 7613 |
|
| 7614 |
tst.l %d1 # did dstore fail? |
| 7615 |
bne.l facc_out_d # yes |
| 7616 |
|
| 7617 |
rts # no; so we're finished |
| 7618 |
|
| 7619 |
# |
| 7620 |
# here, we know that the operand would UNFL if moved out to double prec, |
| 7621 |
# so, denorm and round and then use generic store double routine to |
| 7622 |
# write the value to memory. |
| 7623 |
# |
| 7624 |
fout_dbl_unfl: |
| 7625 |
bset &unfl_bit,FPSR_EXCEPT(%a6) # set UNFL |
| 7626 |
|
| 7627 |
mov.w SRC_EX(%a0),FP_SCR0_EX(%a6) |
| 7628 |
mov.l SRC_HI(%a0),FP_SCR0_HI(%a6) |
| 7629 |
mov.l SRC_LO(%a0),FP_SCR0_LO(%a6) |
| 7630 |
mov.l %a0,-(%sp) |
| 7631 |
|
| 7632 |
clr.l %d0 # pass: S.F. = 0 |
| 7633 |
|
| 7634 |
cmpi.b STAG(%a6),&DENORM # fetch src optype tag |
| 7635 |
bne.b fout_dbl_unfl_cont # let DENORMs fall through |
| 7636 |
|
| 7637 |
lea FP_SCR0(%a6),%a0 |
| 7638 |
bsr.l norm # normalize the DENORM |
| 7639 |
|
| 7640 |
fout_dbl_unfl_cont: |
| 7641 |
lea FP_SCR0(%a6),%a0 # pass: ptr to operand |
| 7642 |
mov.l L_SCR3(%a6),%d1 # pass: rnd prec,mode |
| 7643 |
bsr.l unf_res # calc default underflow result |
| 7644 |
|
| 7645 |
lea FP_SCR0(%a6),%a0 # pass: ptr to fop |
| 7646 |
bsr.l dst_dbl # convert to single prec |
| 7647 |
mov.l %d0,L_SCR1(%a6) |
| 7648 |
mov.l %d1,L_SCR2(%a6) |
| 7649 |
|
| 7650 |
mov.l EXC_EA(%a6),%a1 # pass: dst addr |
| 7651 |
lea L_SCR1(%a6),%a0 # pass: src addr |
| 7652 |
movq.l &0x8,%d0 # pass: opsize is 8 bytes |
| 7653 |
bsr.l _dmem_write # store dbl fop to memory |
| 7654 |
|
| 7655 |
tst.l %d1 # did dstore fail? |
| 7656 |
bne.l facc_out_d # yes |
| 7657 |
|
| 7658 |
mov.b FPCR_ENABLE(%a6),%d1 |
| 7659 |
andi.b &0x0a,%d1 # is UNFL or INEX enabled? |
| 7660 |
bne.w fout_sd_exc_unfl # yes |
| 7661 |
addq.l &0x4,%sp |
| 7662 |
rts |
| 7663 |
|
| 7664 |
# |
| 7665 |
# it's definitely an overflow so call ovf_res to get the correct answer |
| 7666 |
# |
| 7667 |
fout_dbl_ovfl: |
| 7668 |
mov.w 2+SRC_LO(%a0),%d0 |
| 7669 |
andi.w &0x7ff,%d0 |
| 7670 |
bne.b fout_dbl_ovfl_inex2 |
| 7671 |
|
| 7672 |
ori.w &ovfl_inx_mask,2+USER_FPSR(%a6) # set ovfl/aovfl/ainex |
| 7673 |
bra.b fout_dbl_ovfl_cont |
| 7674 |
fout_dbl_ovfl_inex2: |
| 7675 |
ori.w &ovfinx_mask,2+USER_FPSR(%a6) # set ovfl/aovfl/ainex/inex2 |
| 7676 |
|
| 7677 |
fout_dbl_ovfl_cont: |
| 7678 |
mov.l %a0,-(%sp) |
| 7679 |
|
| 7680 |
# call ovf_res() w/ dbl prec and the correct rnd mode to create the default |
| 7681 |
# overflow result. DON'T save the returned ccodes from ovf_res() since |
| 7682 |
# fmove out doesn't alter them. |
| 7683 |
tst.b SRC_EX(%a0) # is operand negative? |
| 7684 |
smi %d1 # set if so |
| 7685 |
mov.l L_SCR3(%a6),%d0 # pass: dbl prec,rnd mode |
| 7686 |
bsr.l ovf_res # calc OVFL result |
| 7687 |
fmovm.x (%a0),&0x80 # load default overflow result |
| 7688 |
fmov.d %fp0,L_SCR1(%a6) # store to double |
| 7689 |
|
| 7690 |
mov.l EXC_EA(%a6),%a1 # pass: dst addr |
| 7691 |
lea L_SCR1(%a6),%a0 # pass: src addr |
| 7692 |
movq.l &0x8,%d0 # pass: opsize is 8 bytes |
| 7693 |
bsr.l _dmem_write # store dbl fop to memory |
| 7694 |
|
| 7695 |
tst.l %d1 # did dstore fail? |
| 7696 |
bne.l facc_out_d # yes |
| 7697 |
|
| 7698 |
mov.b FPCR_ENABLE(%a6),%d1 |
| 7699 |
andi.b &0x0a,%d1 # is UNFL or INEX enabled? |
| 7700 |
bne.w fout_sd_exc_ovfl # yes |
| 7701 |
addq.l &0x4,%sp |
| 7702 |
rts |
| 7703 |
|
| 7704 |
# |
| 7705 |
# move out MAY overflow: |
| 7706 |
# (1) force the exp to 0x3fff |
| 7707 |
# (2) do a move w/ appropriate rnd mode |
| 7708 |
# (3) if exp still equals zero, then insert original exponent |
| 7709 |
# for the correct result. |
| 7710 |
# if exp now equals one, then it overflowed so call ovf_res. |
| 7711 |
# |
| 7712 |
fout_dbl_may_ovfl: |
| 7713 |
mov.w SRC_EX(%a0),%d1 # fetch current sign |
| 7714 |
andi.w &0x8000,%d1 # keep it,clear exp |
| 7715 |
ori.w &0x3fff,%d1 # insert exp = 0 |
| 7716 |
mov.w %d1,FP_SCR0_EX(%a6) # insert scaled exp |
| 7717 |
mov.l SRC_HI(%a0),FP_SCR0_HI(%a6) # copy hi(man) |
| 7718 |
mov.l SRC_LO(%a0),FP_SCR0_LO(%a6) # copy lo(man) |
| 7719 |
|
| 7720 |
fmov.l L_SCR3(%a6),%fpcr # set FPCR |
| 7721 |
|
| 7722 |
fmov.x FP_SCR0(%a6),%fp0 # force fop to be rounded |
| 7723 |
fmov.l &0x0,%fpcr # clear FPCR |
| 7724 |
|
| 7725 |
fabs.x %fp0 # need absolute value |
| 7726 |
fcmp.b %fp0,&0x2 # did exponent increase? |
| 7727 |
fblt.w fout_dbl_exg # no; go finish NORM |
| 7728 |
bra.w fout_dbl_ovfl # yes; go handle overflow |
| 7729 |
|
| 7730 |
######################################################################### |
| 7731 |
# XDEF **************************************************************** # |
| 7732 |
# dst_dbl(): create double precision value from extended prec. # |
| 7733 |
# # |
| 7734 |
# XREF **************************************************************** # |
| 7735 |
# None # |
| 7736 |
# # |
| 7737 |
# INPUT *************************************************************** # |
| 7738 |
# a0 = pointer to source operand in extended precision # |
| 7739 |
# # |
| 7740 |
# OUTPUT ************************************************************** # |
| 7741 |
# d0 = hi(double precision result) # |
| 7742 |
# d1 = lo(double precision result) # |
| 7743 |
# # |
| 7744 |
# ALGORITHM *********************************************************** # |
| 7745 |
# # |
| 7746 |
# Changes extended precision to double precision. # |
| 7747 |
# Note: no attempt is made to round the extended value to double. # |
| 7748 |
# dbl_sign = ext_sign # |
| 7749 |
# dbl_exp = ext_exp - $3fff(ext bias) + $7ff(dbl bias) # |
| 7750 |
# get rid of ext integer bit # |
| 7751 |
# dbl_mant = ext_mant{62:12} # |
| 7752 |
# # |
| 7753 |
# --------------- --------------- --------------- # |
| 7754 |
# extended -> |s| exp | |1| ms mant | | ls mant | # |
| 7755 |
# --------------- --------------- --------------- # |
| 7756 |
# 95 64 63 62 32 31 11 0 # |
| 7757 |
# | | # |
| 7758 |
# | | # |
| 7759 |
# | | # |
| 7760 |
# v v # |
| 7761 |
# --------------- --------------- # |
| 7762 |
# double -> |s|exp| mant | | mant | # |
| 7763 |
# --------------- --------------- # |
| 7764 |
# 63 51 32 31 0 # |
| 7765 |
# # |
| 7766 |
######################################################################### |
| 7767 |
|
| 7768 |
dst_dbl: |
| 7769 |
clr.l %d0 # clear d0 |
| 7770 |
mov.w FTEMP_EX(%a0),%d0 # get exponent |
| 7771 |
subi.w &EXT_BIAS,%d0 # subtract extended precision bias |
| 7772 |
addi.w &DBL_BIAS,%d0 # add double precision bias |
| 7773 |
tst.b FTEMP_HI(%a0) # is number a denorm? |
| 7774 |
bmi.b dst_get_dupper # no |
| 7775 |
subq.w &0x1,%d0 # yes; denorm bias = DBL_BIAS - 1 |
| 7776 |
dst_get_dupper: |
| 7777 |
swap %d0 # d0 now in upper word |
| 7778 |
lsl.l &0x4,%d0 # d0 in proper place for dbl prec exp |
| 7779 |
tst.b FTEMP_EX(%a0) # test sign |
| 7780 |
bpl.b dst_get_dman # if positive, go process mantissa |
| 7781 |
bset &0x1f,%d0 # if negative, set sign |
| 7782 |
dst_get_dman: |
| 7783 |
mov.l FTEMP_HI(%a0),%d1 # get ms mantissa |
| 7784 |
bfextu %d1{&1:&20},%d1 # get upper 20 bits of ms |
| 7785 |
or.l %d1,%d0 # put these bits in ms word of double |
| 7786 |
mov.l %d0,L_SCR1(%a6) # put the new exp back on the stack |
| 7787 |
mov.l FTEMP_HI(%a0),%d1 # get ms mantissa |
| 7788 |
mov.l &21,%d0 # load shift count |
| 7789 |
lsl.l %d0,%d1 # put lower 11 bits in upper bits |
| 7790 |
mov.l %d1,L_SCR2(%a6) # build lower lword in memory |
| 7791 |
mov.l FTEMP_LO(%a0),%d1 # get ls mantissa |
| 7792 |
bfextu %d1{&0:&21},%d0 # get ls 21 bits of double |
| 7793 |
mov.l L_SCR2(%a6),%d1 |
| 7794 |
or.l %d0,%d1 # put them in double result |
| 7795 |
mov.l L_SCR1(%a6),%d0 |
| 7796 |
rts |
| 7797 |
|
| 7798 |
######################################################################### |
| 7799 |
# XDEF **************************************************************** # |
| 7800 |
# dst_sgl(): create single precision value from extended prec # |
| 7801 |
# # |
| 7802 |
# XREF **************************************************************** # |
| 7803 |
# # |
| 7804 |
# INPUT *************************************************************** # |
| 7805 |
# a0 = pointer to source operand in extended precision # |
| 7806 |
# # |
| 7807 |
# OUTPUT ************************************************************** # |
| 7808 |
# d0 = single precision result # |
| 7809 |
# # |
| 7810 |
# ALGORITHM *********************************************************** # |
| 7811 |
# # |
| 7812 |
# Changes extended precision to single precision. # |
| 7813 |
# sgl_sign = ext_sign # |
| 7814 |
# sgl_exp = ext_exp - $3fff(ext bias) + $7f(sgl bias) # |
| 7815 |
# get rid of ext integer bit # |
| 7816 |
# sgl_mant = ext_mant{62:12} # |
| 7817 |
# # |
| 7818 |
# --------------- --------------- --------------- # |
| 7819 |
# extended -> |s| exp | |1| ms mant | | ls mant | # |
| 7820 |
# --------------- --------------- --------------- # |
| 7821 |
# 95 64 63 62 40 32 31 12 0 # |
| 7822 |
# | | # |
| 7823 |
# | | # |
| 7824 |
# | | # |
| 7825 |
# v v # |
| 7826 |
# --------------- # |
| 7827 |
# single -> |s|exp| mant | # |
| 7828 |
# --------------- # |
| 7829 |
# 31 22 0 # |
| 7830 |
# # |
| 7831 |
######################################################################### |
| 7832 |
|
| 7833 |
dst_sgl: |
| 7834 |
clr.l %d0 |
| 7835 |
mov.w FTEMP_EX(%a0),%d0 # get exponent |
| 7836 |
subi.w &EXT_BIAS,%d0 # subtract extended precision bias |
| 7837 |
addi.w &SGL_BIAS,%d0 # add single precision bias |
| 7838 |
tst.b FTEMP_HI(%a0) # is number a denorm? |
| 7839 |
bmi.b dst_get_supper # no |
| 7840 |
subq.w &0x1,%d0 # yes; denorm bias = SGL_BIAS - 1 |
| 7841 |
dst_get_supper: |
| 7842 |
swap %d0 # put exp in upper word of d0 |
| 7843 |
lsl.l &0x7,%d0 # shift it into single exp bits |
| 7844 |
tst.b FTEMP_EX(%a0) # test sign |
| 7845 |
bpl.b dst_get_sman # if positive, continue |
| 7846 |
bset &0x1f,%d0 # if negative, put in sign first |
| 7847 |
dst_get_sman: |
| 7848 |
mov.l FTEMP_HI(%a0),%d1 # get ms mantissa |
| 7849 |
andi.l &0x7fffff00,%d1 # get upper 23 bits of ms |
| 7850 |
lsr.l &0x8,%d1 # and put them flush right |
| 7851 |
or.l %d1,%d0 # put these bits in ms word of single |
| 7852 |
rts |
| 7853 |
|
| 7854 |
############################################################################## |
| 7855 |
fout_pack: |
| 7856 |
bsr.l _calc_ea_fout # fetch the <ea> |
| 7857 |
mov.l %a0,-(%sp) |
| 7858 |
|
| 7859 |
mov.b STAG(%a6),%d0 # fetch input type |
| 7860 |
bne.w fout_pack_not_norm # input is not NORM |
| 7861 |
|
| 7862 |
fout_pack_norm: |
| 7863 |
btst &0x4,EXC_CMDREG(%a6) # static or dynamic? |
| 7864 |
beq.b fout_pack_s # static |
| 7865 |
|
| 7866 |
fout_pack_d: |
| 7867 |
mov.b 1+EXC_CMDREG(%a6),%d1 # fetch dynamic reg |
| 7868 |
lsr.b &0x4,%d1 |
| 7869 |
andi.w &0x7,%d1 |
| 7870 |
|
| 7871 |
bsr.l fetch_dreg # fetch Dn w/ k-factor |
| 7872 |
|
| 7873 |
bra.b fout_pack_type |
| 7874 |
fout_pack_s: |
| 7875 |
mov.b 1+EXC_CMDREG(%a6),%d0 # fetch static field |
| 7876 |
|
| 7877 |
fout_pack_type: |
| 7878 |
bfexts %d0{&25:&7},%d0 # extract k-factor |
| 7879 |
mov.l %d0,-(%sp) |
| 7880 |
|
| 7881 |
lea FP_SRC(%a6),%a0 # pass: ptr to input |
| 7882 |
|
| 7883 |
# bindec is currently scrambling FP_SRC for denorm inputs. |
| 7884 |
# we'll have to change this, but for now, tough luck!!! |
| 7885 |
bsr.l bindec # convert xprec to packed |
| 7886 |
|
| 7887 |
# andi.l &0xcfff000f,FP_SCR0(%a6) # clear unused fields |
| 7888 |
andi.l &0xcffff00f,FP_SCR0(%a6) # clear unused fields |
| 7889 |
|
| 7890 |
mov.l (%sp)+,%d0 |
| 7891 |
|
| 7892 |
tst.b 3+FP_SCR0_EX(%a6) |
| 7893 |
bne.b fout_pack_set |
| 7894 |
tst.l FP_SCR0_HI(%a6) |
| 7895 |
bne.b fout_pack_set |
| 7896 |
tst.l FP_SCR0_LO(%a6) |
| 7897 |
bne.b fout_pack_set |
| 7898 |
|
| 7899 |
# add the extra condition that only if the k-factor was zero, too, should |
| 7900 |
# we zero the exponent |
| 7901 |
tst.l %d0 |
| 7902 |
bne.b fout_pack_set |
| 7903 |
# "mantissa" is all zero which means that the answer is zero. but, the '040 |
| 7904 |
# algorithm allows the exponent to be non-zero. the 881/2 do not. Therefore, |
| 7905 |
# if the mantissa is zero, I will zero the exponent, too. |
| 7906 |
# the question now is whether the exponents sign bit is allowed to be non-zero |
| 7907 |
# for a zero, also... |
| 7908 |
andi.w &0xf000,FP_SCR0(%a6) |
| 7909 |
|
| 7910 |
fout_pack_set: |
| 7911 |
|
| 7912 |
lea FP_SCR0(%a6),%a0 # pass: src addr |
| 7913 |
|
| 7914 |
fout_pack_write: |
| 7915 |
mov.l (%sp)+,%a1 # pass: dst addr |
| 7916 |
mov.l &0xc,%d0 # pass: opsize is 12 bytes |
| 7917 |
|
| 7918 |
cmpi.b SPCOND_FLG(%a6),&mda7_flg |
| 7919 |
beq.b fout_pack_a7 |
| 7920 |
|
| 7921 |
bsr.l _dmem_write # write ext prec number to memory |
| 7922 |
|
| 7923 |
tst.l %d1 # did dstore fail? |
| 7924 |
bne.w fout_ext_err # yes |
| 7925 |
|
| 7926 |
rts |
| 7927 |
|
| 7928 |
# we don't want to do the write if the exception occurred in supervisor mode |
| 7929 |
# so _mem_write2() handles this for us. |
| 7930 |
fout_pack_a7: |
| 7931 |
bsr.l _mem_write2 # write ext prec number to memory |
| 7932 |
|
| 7933 |
tst.l %d1 # did dstore fail? |
| 7934 |
bne.w fout_ext_err # yes |
| 7935 |
|
| 7936 |
rts |
| 7937 |
|
| 7938 |
fout_pack_not_norm: |
| 7939 |
cmpi.b %d0,&DENORM # is it a DENORM? |
| 7940 |
beq.w fout_pack_norm # yes |
| 7941 |
lea FP_SRC(%a6),%a0 |
| 7942 |
clr.w 2+FP_SRC_EX(%a6) |
| 7943 |
cmpi.b %d0,&SNAN # is it an SNAN? |
| 7944 |
beq.b fout_pack_snan # yes |
| 7945 |
bra.b fout_pack_write # no |
| 7946 |
|
| 7947 |
fout_pack_snan: |
| 7948 |
ori.w &snaniop2_mask,FPSR_EXCEPT(%a6) # set SNAN/AIOP |
| 7949 |
bset &0x6,FP_SRC_HI(%a6) # set snan bit |
| 7950 |
bra.b fout_pack_write |
| 7951 |
|
| 7952 |
######################################################################### |
| 7953 |
# XDEF **************************************************************** # |
| 7954 |
# fmul(): emulates the fmul instruction # |
| 7955 |
# fsmul(): emulates the fsmul instruction # |
| 7956 |
# fdmul(): emulates the fdmul instruction # |
| 7957 |
# # |
| 7958 |
# XREF **************************************************************** # |
| 7959 |
# scale_to_zero_src() - scale src exponent to zero # |
| 7960 |
# scale_to_zero_dst() - scale dst exponent to zero # |
| 7961 |
# unf_res() - return default underflow result # |
| 7962 |
# ovf_res() - return default overflow result # |
| 7963 |
# res_qnan() - return QNAN result # |
| 7964 |
# res_snan() - return SNAN result # |
| 7965 |
# # |
| 7966 |
# INPUT *************************************************************** # |
| 7967 |
# a0 = pointer to extended precision source operand # |
| 7968 |
# a1 = pointer to extended precision destination operand # |
| 7969 |
# d0 rnd prec,mode # |
| 7970 |
# # |
| 7971 |
# OUTPUT ************************************************************** # |
| 7972 |
# fp0 = result # |
| 7973 |
# fp1 = EXOP (if exception occurred) # |
| 7974 |
# # |
| 7975 |
# ALGORITHM *********************************************************** # |
| 7976 |
# Handle NANs, infinities, and zeroes as special cases. Divide # |
| 7977 |
# norms/denorms into ext/sgl/dbl precision. # |
| 7978 |
# For norms/denorms, scale the exponents such that a multiply # |
| 7979 |
# instruction won't cause an exception. Use the regular fmul to # |
| 7980 |
# compute a result. Check if the regular operands would have taken # |
| 7981 |
# an exception. If so, return the default overflow/underflow result # |
| 7982 |
# and return the EXOP if exceptions are enabled. Else, scale the # |
| 7983 |
# result operand to the proper exponent. # |
| 7984 |
# # |
| 7985 |
######################################################################### |
| 7986 |
|
| 7987 |
align 0x10 |
| 7988 |
tbl_fmul_ovfl: |
| 7989 |
long 0x3fff - 0x7ffe # ext_max |
| 7990 |
long 0x3fff - 0x407e # sgl_max |
| 7991 |
long 0x3fff - 0x43fe # dbl_max |
| 7992 |
tbl_fmul_unfl: |
| 7993 |
long 0x3fff + 0x0001 # ext_unfl |
| 7994 |
long 0x3fff - 0x3f80 # sgl_unfl |
| 7995 |
long 0x3fff - 0x3c00 # dbl_unfl |
| 7996 |
|
| 7997 |
global fsmul |
| 7998 |
fsmul: |
| 7999 |
andi.b &0x30,%d0 # clear rnd prec |
| 8000 |
ori.b &s_mode*0x10,%d0 # insert sgl prec |
| 8001 |
bra.b fmul |
| 8002 |
|
| 8003 |
global fdmul |
| 8004 |
fdmul: |
| 8005 |
andi.b &0x30,%d0 |
| 8006 |
ori.b &d_mode*0x10,%d0 # insert dbl prec |
| 8007 |
|
| 8008 |
global fmul |
| 8009 |
fmul: |
| 8010 |
mov.l %d0,L_SCR3(%a6) # store rnd info |
| 8011 |
|
| 8012 |
clr.w %d1 |
| 8013 |
mov.b DTAG(%a6),%d1 |
| 8014 |
lsl.b &0x3,%d1 |
| 8015 |
or.b STAG(%a6),%d1 # combine src tags |
| 8016 |
bne.w fmul_not_norm # optimize on non-norm input |
| 8017 |
|
| 8018 |
fmul_norm: |
| 8019 |
mov.w DST_EX(%a1),FP_SCR1_EX(%a6) |
| 8020 |
mov.l DST_HI(%a1),FP_SCR1_HI(%a6) |
| 8021 |
mov.l DST_LO(%a1),FP_SCR1_LO(%a6) |
| 8022 |
|
| 8023 |
mov.w SRC_EX(%a0),FP_SCR0_EX(%a6) |
| 8024 |
mov.l SRC_HI(%a0),FP_SCR0_HI(%a6) |
| 8025 |
mov.l SRC_LO(%a0),FP_SCR0_LO(%a6) |
| 8026 |
|
| 8027 |
bsr.l scale_to_zero_src # scale src exponent |
| 8028 |
mov.l %d0,-(%sp) # save scale factor 1 |
| 8029 |
|
| 8030 |
bsr.l scale_to_zero_dst # scale dst exponent |
| 8031 |
|
| 8032 |
add.l %d0,(%sp) # SCALE_FACTOR = scale1 + scale2 |
| 8033 |
|
| 8034 |
mov.w 2+L_SCR3(%a6),%d1 # fetch precision |
| 8035 |
lsr.b &0x6,%d1 # shift to lo bits |
| 8036 |
mov.l (%sp)+,%d0 # load S.F. |
| 8037 |
cmp.l %d0,(tbl_fmul_ovfl.w,%pc,%d1.w*4) # would result ovfl? |
| 8038 |
beq.w fmul_may_ovfl # result may rnd to overflow |
| 8039 |
blt.w fmul_ovfl # result will overflow |
| 8040 |
|
| 8041 |
cmp.l %d0,(tbl_fmul_unfl.w,%pc,%d1.w*4) # would result unfl? |
| 8042 |
beq.w fmul_may_unfl # result may rnd to no unfl |
| 8043 |
bgt.w fmul_unfl # result will underflow |
| 8044 |
|
| 8045 |
# |
| 8046 |
# NORMAL: |
| 8047 |
# - the result of the multiply operation will neither overflow nor underflow. |
| 8048 |
# - do the multiply to the proper precision and rounding mode. |
| 8049 |
# - scale the result exponent using the scale factor. if both operands were |
| 8050 |
# normalized then we really don't need to go through this scaling. but for now, |
| 8051 |
# this will do. |
| 8052 |
# |
| 8053 |
fmul_normal: |
| 8054 |
fmovm.x FP_SCR1(%a6),&0x80 # load dst operand |
| 8055 |
|
| 8056 |
fmov.l L_SCR3(%a6),%fpcr # set FPCR |
| 8057 |
fmov.l &0x0,%fpsr # clear FPSR |
| 8058 |
|
| 8059 |
fmul.x FP_SCR0(%a6),%fp0 # execute multiply |
| 8060 |
|
| 8061 |
fmov.l %fpsr,%d1 # save status |
| 8062 |
fmov.l &0x0,%fpcr # clear FPCR |
| 8063 |
|
| 8064 |
or.l %d1,USER_FPSR(%a6) # save INEX2,N |
| 8065 |
|
| 8066 |
fmul_normal_exit: |
| 8067 |
fmovm.x &0x80,FP_SCR0(%a6) # store out result |
| 8068 |
mov.l %d2,-(%sp) # save d2 |
| 8069 |
mov.w FP_SCR0_EX(%a6),%d1 # load {sgn,exp} |
| 8070 |
mov.l %d1,%d2 # make a copy |
| 8071 |
andi.l &0x7fff,%d1 # strip sign |
| 8072 |
andi.w &0x8000,%d2 # keep old sign |
| 8073 |
sub.l %d0,%d1 # add scale factor |
| 8074 |
or.w %d2,%d1 # concat old sign,new exp |
| 8075 |
mov.w %d1,FP_SCR0_EX(%a6) # insert new exponent |
| 8076 |
mov.l (%sp)+,%d2 # restore d2 |
| 8077 |
fmovm.x FP_SCR0(%a6),&0x80 # return default result in fp0 |
| 8078 |
rts |
| 8079 |
|
| 8080 |
# |
| 8081 |
# OVERFLOW: |
| 8082 |
# - the result of the multiply operation is an overflow. |
| 8083 |
# - do the multiply to the proper precision and rounding mode in order to |
| 8084 |
# set the inexact bits. |
| 8085 |
# - calculate the default result and return it in fp0. |
| 8086 |
# - if overflow or inexact is enabled, we need a multiply result rounded to |
| 8087 |
# extended precision. if the original operation was extended, then we have this |
| 8088 |
# result. if the original operation was single or double, we have to do another |
| 8089 |
# multiply using extended precision and the correct rounding mode. the result |
| 8090 |
# of this operation then has its exponent scaled by -0x6000 to create the |
| 8091 |
# exceptional operand. |
| 8092 |
# |
| 8093 |
fmul_ovfl: |
| 8094 |
fmovm.x FP_SCR1(%a6),&0x80 # load dst operand |
| 8095 |
|
| 8096 |
fmov.l L_SCR3(%a6),%fpcr # set FPCR |
| 8097 |
fmov.l &0x0,%fpsr # clear FPSR |
| 8098 |
|
| 8099 |
fmul.x FP_SCR0(%a6),%fp0 # execute multiply |
| 8100 |
|
| 8101 |
fmov.l %fpsr,%d1 # save status |
| 8102 |
fmov.l &0x0,%fpcr # clear FPCR |
| 8103 |
|
| 8104 |
or.l %d1,USER_FPSR(%a6) # save INEX2,N |
| 8105 |
|
| 8106 |
# save setting this until now because this is where fmul_may_ovfl may jump in |
| 8107 |
fmul_ovfl_tst: |
| 8108 |
or.l &ovfl_inx_mask,USER_FPSR(%a6) # set ovfl/aovfl/ainex |
| 8109 |
|
| 8110 |
mov.b FPCR_ENABLE(%a6),%d1 |
| 8111 |
andi.b &0x13,%d1 # is OVFL or INEX enabled? |
| 8112 |
bne.b fmul_ovfl_ena # yes |
| 8113 |
|
| 8114 |
# calculate the default result |
| 8115 |
fmul_ovfl_dis: |
| 8116 |
btst &neg_bit,FPSR_CC(%a6) # is result negative? |
| 8117 |
sne %d1 # set sign param accordingly |
| 8118 |
mov.l L_SCR3(%a6),%d0 # pass rnd prec,mode |
| 8119 |
bsr.l ovf_res # calculate default result |
| 8120 |
or.b %d0,FPSR_CC(%a6) # set INF,N if applicable |
| 8121 |
fmovm.x (%a0),&0x80 # return default result in fp0 |
| 8122 |
rts |
| 8123 |
|
| 8124 |
# |
| 8125 |
# OVFL is enabled; Create EXOP: |
| 8126 |
# - if precision is extended, then we have the EXOP. simply bias the exponent |
| 8127 |
# with an extra -0x6000. if the precision is single or double, we need to |
| 8128 |
# calculate a result rounded to extended precision. |
| 8129 |
# |
| 8130 |
fmul_ovfl_ena: |
| 8131 |
mov.l L_SCR3(%a6),%d1 |
| 8132 |
andi.b &0xc0,%d1 # test the rnd prec |
| 8133 |
bne.b fmul_ovfl_ena_sd # it's sgl or dbl |
| 8134 |
|
| 8135 |
fmul_ovfl_ena_cont: |
| 8136 |
fmovm.x &0x80,FP_SCR0(%a6) # move result to stack |
| 8137 |
|
| 8138 |
mov.l %d2,-(%sp) # save d2 |
| 8139 |
mov.w FP_SCR0_EX(%a6),%d1 # fetch {sgn,exp} |
| 8140 |
mov.w %d1,%d2 # make a copy |
| 8141 |
andi.l &0x7fff,%d1 # strip sign |
| 8142 |
sub.l %d0,%d1 # add scale factor |
| 8143 |
subi.l &0x6000,%d1 # subtract bias |
| 8144 |
andi.w &0x7fff,%d1 # clear sign bit |
| 8145 |
andi.w &0x8000,%d2 # keep old sign |
| 8146 |
or.w %d2,%d1 # concat old sign,new exp |
| 8147 |
mov.w %d1,FP_SCR0_EX(%a6) # insert new exponent |
| 8148 |
mov.l (%sp)+,%d2 # restore d2 |
| 8149 |
fmovm.x FP_SCR0(%a6),&0x40 # return EXOP in fp1 |
| 8150 |
bra.b fmul_ovfl_dis |
| 8151 |
|
| 8152 |
fmul_ovfl_ena_sd: |
| 8153 |
fmovm.x FP_SCR1(%a6),&0x80 # load dst operand |
| 8154 |
|
| 8155 |
mov.l L_SCR3(%a6),%d1 |
| 8156 |
andi.b &0x30,%d1 # keep rnd mode only |
| 8157 |
fmov.l %d1,%fpcr # set FPCR |
| 8158 |
|
| 8159 |
fmul.x FP_SCR0(%a6),%fp0 # execute multiply |
| 8160 |
|
| 8161 |
fmov.l &0x0,%fpcr # clear FPCR |
| 8162 |
bra.b fmul_ovfl_ena_cont |
| 8163 |
|
| 8164 |
# |
| 8165 |
# may OVERFLOW: |
| 8166 |
# - the result of the multiply operation MAY overflow. |
| 8167 |
# - do the multiply to the proper precision and rounding mode in order to |
| 8168 |
# set the inexact bits. |
| 8169 |
# - calculate the default result and return it in fp0. |
| 8170 |
# |
| 8171 |
fmul_may_ovfl: |
| 8172 |
fmovm.x FP_SCR1(%a6),&0x80 # load dst op |
| 8173 |
|
| 8174 |
fmov.l L_SCR3(%a6),%fpcr # set FPCR |
| 8175 |
fmov.l &0x0,%fpsr # clear FPSR |
| 8176 |
|
| 8177 |
fmul.x FP_SCR0(%a6),%fp0 # execute multiply |
| 8178 |
|
| 8179 |
fmov.l %fpsr,%d1 # save status |
| 8180 |
fmov.l &0x0,%fpcr # clear FPCR |
| 8181 |
|
| 8182 |
or.l %d1,USER_FPSR(%a6) # save INEX2,N |
| 8183 |
|
| 8184 |
fabs.x %fp0,%fp1 # make a copy of result |
| 8185 |
fcmp.b %fp1,&0x2 # is |result| >= 2.b? |
| 8186 |
fbge.w fmul_ovfl_tst # yes; overflow has occurred |
| 8187 |
|
| 8188 |
# no, it didn't overflow; we have correct result |
| 8189 |
bra.w fmul_normal_exit |
| 8190 |
|
| 8191 |
# |
| 8192 |
# UNDERFLOW: |
| 8193 |
# - the result of the multiply operation is an underflow. |
| 8194 |
# - do the multiply to the proper precision and rounding mode in order to |
| 8195 |
# set the inexact bits. |
| 8196 |
# - calculate the default result and return it in fp0. |
| 8197 |
# - if overflow or inexact is enabled, we need a multiply result rounded to |
| 8198 |
# extended precision. if the original operation was extended, then we have this |
| 8199 |
# result. if the original operation was single or double, we have to do another |
| 8200 |
# multiply using extended precision and the correct rounding mode. the result |
| 8201 |
# of this operation then has its exponent scaled by -0x6000 to create the |
| 8202 |
# exceptional operand. |
| 8203 |
# |
| 8204 |
fmul_unfl: |
| 8205 |
bset &unfl_bit,FPSR_EXCEPT(%a6) # set unfl exc bit |
| 8206 |
|
| 8207 |
# for fun, let's use only extended precision, round to zero. then, let |
| 8208 |
# the unf_res() routine figure out all the rest. |
| 8209 |
# will we get the correct answer. |
| 8210 |
fmovm.x FP_SCR1(%a6),&0x80 # load dst operand |
| 8211 |
|
| 8212 |
fmov.l &rz_mode*0x10,%fpcr # set FPCR |
| 8213 |
fmov.l &0x0,%fpsr # clear FPSR |
| 8214 |
|
| 8215 |
fmul.x FP_SCR0(%a6),%fp0 # execute multiply |
| 8216 |
|
| 8217 |
fmov.l %fpsr,%d1 # save status |
| 8218 |
fmov.l &0x0,%fpcr # clear FPCR |
| 8219 |
|
| 8220 |
or.l %d1,USER_FPSR(%a6) # save INEX2,N |
| 8221 |
|
| 8222 |
mov.b FPCR_ENABLE(%a6),%d1 |
| 8223 |
andi.b &0x0b,%d1 # is UNFL or INEX enabled? |
| 8224 |
bne.b fmul_unfl_ena # yes |
| 8225 |
|
| 8226 |
fmul_unfl_dis: |
| 8227 |
fmovm.x &0x80,FP_SCR0(%a6) # store out result |
| 8228 |
|
| 8229 |
lea FP_SCR0(%a6),%a0 # pass: result addr |
| 8230 |
mov.l L_SCR3(%a6),%d1 # pass: rnd prec,mode |
| 8231 |
bsr.l unf_res # calculate default result |
| 8232 |
or.b %d0,FPSR_CC(%a6) # unf_res2 may have set 'Z' |
| 8233 |
fmovm.x FP_SCR0(%a6),&0x80 # return default result in fp0 |
| 8234 |
rts |
| 8235 |
|
| 8236 |
# |
| 8237 |
# UNFL is enabled. |
| 8238 |
# |
| 8239 |
fmul_unfl_ena: |
| 8240 |
fmovm.x FP_SCR1(%a6),&0x40 # load dst op |
| 8241 |
|
| 8242 |
mov.l L_SCR3(%a6),%d1 |
| 8243 |
andi.b &0xc0,%d1 # is precision extended? |
| 8244 |
bne.b fmul_unfl_ena_sd # no, sgl or dbl |
| 8245 |
|
| 8246 |
# if the rnd mode is anything but RZ, then we have to re-do the above |
| 8247 |
# multiplication because we used RZ for all. |
| 8248 |
fmov.l L_SCR3(%a6),%fpcr # set FPCR |
| 8249 |
|
| 8250 |
fmul_unfl_ena_cont: |
| 8251 |
fmov.l &0x0,%fpsr # clear FPSR |
| 8252 |
|
| 8253 |
fmul.x FP_SCR0(%a6),%fp1 # execute multiply |
| 8254 |
|
| 8255 |
fmov.l &0x0,%fpcr # clear FPCR |
| 8256 |
|
| 8257 |
fmovm.x &0x40,FP_SCR0(%a6) # save result to stack |
| 8258 |
mov.l %d2,-(%sp) # save d2 |
| 8259 |
mov.w FP_SCR0_EX(%a6),%d1 # fetch {sgn,exp} |
| 8260 |
mov.l %d1,%d2 # make a copy |
| 8261 |
andi.l &0x7fff,%d1 # strip sign |
| 8262 |
andi.w &0x8000,%d2 # keep old sign |
| 8263 |
sub.l %d0,%d1 # add scale factor |
| 8264 |
addi.l &0x6000,%d1 # add bias |
| 8265 |
andi.w &0x7fff,%d1 |
| 8266 |
or.w %d2,%d1 # concat old sign,new exp |
| 8267 |
mov.w %d1,FP_SCR0_EX(%a6) # insert new exponent |
| 8268 |
mov.l (%sp)+,%d2 # restore d2 |
| 8269 |
fmovm.x FP_SCR0(%a6),&0x40 # return EXOP in fp1 |
| 8270 |
bra.w fmul_unfl_dis |
| 8271 |
|
| 8272 |
fmul_unfl_ena_sd: |
| 8273 |
mov.l L_SCR3(%a6),%d1 |
| 8274 |
andi.b &0x30,%d1 # use only rnd mode |
| 8275 |
fmov.l %d1,%fpcr # set FPCR |
| 8276 |
|
| 8277 |
bra.b fmul_unfl_ena_cont |
| 8278 |
|
| 8279 |
# MAY UNDERFLOW: |
| 8280 |
# -use the correct rounding mode and precision. this code favors operations |
| 8281 |
# that do not underflow. |
| 8282 |
fmul_may_unfl: |
| 8283 |
fmovm.x FP_SCR1(%a6),&0x80 # load dst operand |
| 8284 |
|
| 8285 |
fmov.l L_SCR3(%a6),%fpcr # set FPCR |
| 8286 |
fmov.l &0x0,%fpsr # clear FPSR |
| 8287 |
|
| 8288 |
fmul.x FP_SCR0(%a6),%fp0 # execute multiply |
| 8289 |
|
| 8290 |
fmov.l %fpsr,%d1 # save status |
| 8291 |
fmov.l &0x0,%fpcr # clear FPCR |
| 8292 |
|
| 8293 |
or.l %d1,USER_FPSR(%a6) # save INEX2,N |
| 8294 |
|
| 8295 |
fabs.x %fp0,%fp1 # make a copy of result |
| 8296 |
fcmp.b %fp1,&0x2 # is |result| > 2.b? |
| 8297 |
fbgt.w fmul_normal_exit # no; no underflow occurred |
| 8298 |
fblt.w fmul_unfl # yes; underflow occurred |
| 8299 |
|
| 8300 |
# |
| 8301 |
# we still don't know if underflow occurred. result is ~ equal to 2. but, |
| 8302 |
# we don't know if the result was an underflow that rounded up to a 2 or |
| 8303 |
# a normalized number that rounded down to a 2. so, redo the entire operation |
| 8304 |
# using RZ as the rounding mode to see what the pre-rounded result is. |
| 8305 |
# this case should be relatively rare. |
| 8306 |
# |
| 8307 |
fmovm.x FP_SCR1(%a6),&0x40 # load dst operand |
| 8308 |
|
| 8309 |
mov.l L_SCR3(%a6),%d1 |
| 8310 |
andi.b &0xc0,%d1 # keep rnd prec |
| 8311 |
ori.b &rz_mode*0x10,%d1 # insert RZ |
| 8312 |
|
| 8313 |
fmov.l %d1,%fpcr # set FPCR |
| 8314 |
fmov.l &0x0,%fpsr # clear FPSR |
| 8315 |
|
| 8316 |
fmul.x FP_SCR0(%a6),%fp1 # execute multiply |
| 8317 |
|
| 8318 |
fmov.l &0x0,%fpcr # clear FPCR |
| 8319 |
fabs.x %fp1 # make absolute value |
| 8320 |
fcmp.b %fp1,&0x2 # is |result| < 2.b? |
| 8321 |
fbge.w fmul_normal_exit # no; no underflow occurred |
| 8322 |
bra.w fmul_unfl # yes, underflow occurred |
| 8323 |
|
| 8324 |
################################################################################ |
| 8325 |
|
| 8326 |
# |
| 8327 |
# Multiply: inputs are not both normalized; what are they? |
| 8328 |
# |
| 8329 |
fmul_not_norm: |
| 8330 |
mov.w (tbl_fmul_op.b,%pc,%d1.w*2),%d1 |
| 8331 |
jmp (tbl_fmul_op.b,%pc,%d1.w) |
| 8332 |
|
| 8333 |
swbeg &48 |
| 8334 |
tbl_fmul_op: |
| 8335 |
short fmul_norm - tbl_fmul_op # NORM x NORM |
| 8336 |
short fmul_zero - tbl_fmul_op # NORM x ZERO |
| 8337 |
short fmul_inf_src - tbl_fmul_op # NORM x INF |
| 8338 |
short fmul_res_qnan - tbl_fmul_op # NORM x QNAN |
| 8339 |
short fmul_norm - tbl_fmul_op # NORM x DENORM |
| 8340 |
short fmul_res_snan - tbl_fmul_op # NORM x SNAN |
| 8341 |
short tbl_fmul_op - tbl_fmul_op # |
| 8342 |
short tbl_fmul_op - tbl_fmul_op # |
| 8343 |
|
| 8344 |
short fmul_zero - tbl_fmul_op # ZERO x NORM |
| 8345 |
short fmul_zero - tbl_fmul_op # ZERO x ZERO |
| 8346 |
short fmul_res_operr - tbl_fmul_op # ZERO x INF |
| 8347 |
short fmul_res_qnan - tbl_fmul_op # ZERO x QNAN |
| 8348 |
short fmul_zero - tbl_fmul_op # ZERO x DENORM |
| 8349 |
short fmul_res_snan - tbl_fmul_op # ZERO x SNAN |
| 8350 |
short tbl_fmul_op - tbl_fmul_op # |
| 8351 |
short tbl_fmul_op - tbl_fmul_op # |
| 8352 |
|
| 8353 |
short fmul_inf_dst - tbl_fmul_op # INF x NORM |
| 8354 |
short fmul_res_operr - tbl_fmul_op # INF x ZERO |
| 8355 |
short fmul_inf_dst - tbl_fmul_op # INF x INF |
| 8356 |
short fmul_res_qnan - tbl_fmul_op # INF x QNAN |
| 8357 |
short fmul_inf_dst - tbl_fmul_op # INF x DENORM |
| 8358 |
short fmul_res_snan - tbl_fmul_op # INF x SNAN |
| 8359 |
short tbl_fmul_op - tbl_fmul_op # |
| 8360 |
short tbl_fmul_op - tbl_fmul_op # |
| 8361 |
|
| 8362 |
short fmul_res_qnan - tbl_fmul_op # QNAN x NORM |
| 8363 |
short fmul_res_qnan - tbl_fmul_op # QNAN x ZERO |
| 8364 |
short fmul_res_qnan - tbl_fmul_op # QNAN x INF |
| 8365 |
short fmul_res_qnan - tbl_fmul_op # QNAN x QNAN |
| 8366 |
short fmul_res_qnan - tbl_fmul_op # QNAN x DENORM |
| 8367 |
short fmul_res_snan - tbl_fmul_op # QNAN x SNAN |
| 8368 |
short tbl_fmul_op - tbl_fmul_op # |
| 8369 |
short tbl_fmul_op - tbl_fmul_op # |
| 8370 |
|
| 8371 |
short fmul_norm - tbl_fmul_op # NORM x NORM |
| 8372 |
short fmul_zero - tbl_fmul_op # NORM x ZERO |
| 8373 |
short fmul_inf_src - tbl_fmul_op # NORM x INF |
| 8374 |
short fmul_res_qnan - tbl_fmul_op # NORM x QNAN |
| 8375 |
short fmul_norm - tbl_fmul_op # NORM x DENORM |
| 8376 |
short fmul_res_snan - tbl_fmul_op # NORM x SNAN |
| 8377 |
short tbl_fmul_op - tbl_fmul_op # |
| 8378 |
short tbl_fmul_op - tbl_fmul_op # |
| 8379 |
|
| 8380 |
short fmul_res_snan - tbl_fmul_op # SNAN x NORM |
| 8381 |
short fmul_res_snan - tbl_fmul_op # SNAN x ZERO |
| 8382 |
short fmul_res_snan - tbl_fmul_op # SNAN x INF |
| 8383 |
short fmul_res_snan - tbl_fmul_op # SNAN x QNAN |
| 8384 |
short fmul_res_snan - tbl_fmul_op # SNAN x DENORM |
| 8385 |
short fmul_res_snan - tbl_fmul_op # SNAN x SNAN |
| 8386 |
short tbl_fmul_op - tbl_fmul_op # |
| 8387 |
short tbl_fmul_op - tbl_fmul_op # |
| 8388 |
|
| 8389 |
fmul_res_operr: |
| 8390 |
bra.l res_operr |
| 8391 |
fmul_res_snan: |
| 8392 |
bra.l res_snan |
| 8393 |
fmul_res_qnan: |
| 8394 |
bra.l res_qnan |
| 8395 |
|
| 8396 |
# |
| 8397 |
# Multiply: (Zero x Zero) || (Zero x norm) || (Zero x denorm) |
| 8398 |
# |
| 8399 |
global fmul_zero # global for fsglmul |
| 8400 |
fmul_zero: |
| 8401 |
mov.b SRC_EX(%a0),%d0 # exclusive or the signs |
| 8402 |
mov.b DST_EX(%a1),%d1 |
| 8403 |
eor.b %d0,%d1 |
| 8404 |
bpl.b fmul_zero_p # result ZERO is pos. |
| 8405 |
fmul_zero_n: |
| 8406 |
fmov.s &0x80000000,%fp0 # load -ZERO |
| 8407 |
mov.b &z_bmask+neg_bmask,FPSR_CC(%a6) # set Z/N |
| 8408 |
rts |
| 8409 |
fmul_zero_p: |
| 8410 |
fmov.s &0x00000000,%fp0 # load +ZERO |
| 8411 |
mov.b &z_bmask,FPSR_CC(%a6) # set Z |
| 8412 |
rts |
| 8413 |
|
| 8414 |
# |
| 8415 |
# Multiply: (inf x inf) || (inf x norm) || (inf x denorm) |
| 8416 |
# |
| 8417 |
# Note: The j-bit for an infinity is a don't-care. However, to be |
| 8418 |
# strictly compatible w/ the 68881/882, we make sure to return an |
| 8419 |
# INF w/ the j-bit set if the input INF j-bit was set. Destination |
| 8420 |
# INFs take priority. |
| 8421 |
# |
| 8422 |
global fmul_inf_dst # global for fsglmul |
| 8423 |
fmul_inf_dst: |
| 8424 |
fmovm.x DST(%a1),&0x80 # return INF result in fp0 |
| 8425 |
mov.b SRC_EX(%a0),%d0 # exclusive or the signs |
| 8426 |
mov.b DST_EX(%a1),%d1 |
| 8427 |
eor.b %d0,%d1 |
| 8428 |
bpl.b fmul_inf_dst_p # result INF is pos. |
| 8429 |
fmul_inf_dst_n: |
| 8430 |
fabs.x %fp0 # clear result sign |
| 8431 |
fneg.x %fp0 # set result sign |
| 8432 |
mov.b &inf_bmask+neg_bmask,FPSR_CC(%a6) # set INF/N |
| 8433 |
rts |
| 8434 |
fmul_inf_dst_p: |
| 8435 |
fabs.x %fp0 # clear result sign |
| 8436 |
mov.b &inf_bmask,FPSR_CC(%a6) # set INF |
| 8437 |
rts |
| 8438 |
|
| 8439 |
global fmul_inf_src # global for fsglmul |
| 8440 |
fmul_inf_src: |
| 8441 |
fmovm.x SRC(%a0),&0x80 # return INF result in fp0 |
| 8442 |
mov.b SRC_EX(%a0),%d0 # exclusive or the signs |
| 8443 |
mov.b DST_EX(%a1),%d1 |
| 8444 |
eor.b %d0,%d1 |
| 8445 |
bpl.b fmul_inf_dst_p # result INF is pos. |
| 8446 |
bra.b fmul_inf_dst_n |
| 8447 |
|
| 8448 |
######################################################################### |
| 8449 |
# XDEF **************************************************************** # |
| 8450 |
# fin(): emulates the fmove instruction # |
| 8451 |
# fsin(): emulates the fsmove instruction # |
| 8452 |
# fdin(): emulates the fdmove instruction # |
| 8453 |
# # |
| 8454 |
# XREF **************************************************************** # |
| 8455 |
# norm() - normalize mantissa for EXOP on denorm # |
| 8456 |
# scale_to_zero_src() - scale src exponent to zero # |
| 8457 |
# ovf_res() - return default overflow result # |
| 8458 |
# unf_res() - return default underflow result # |
| 8459 |
# res_qnan_1op() - return QNAN result # |
| 8460 |
# res_snan_1op() - return SNAN result # |
| 8461 |
# # |
| 8462 |
# INPUT *************************************************************** # |
| 8463 |
# a0 = pointer to extended precision source operand # |
| 8464 |
# d0 = round prec/mode # |
| 8465 |
# # |
| 8466 |
# OUTPUT ************************************************************** # |
| 8467 |
# fp0 = result # |
| 8468 |
# fp1 = EXOP (if exception occurred) # |
| 8469 |
# # |
| 8470 |
# ALGORITHM *********************************************************** # |
| 8471 |
# Handle NANs, infinities, and zeroes as special cases. Divide # |
| 8472 |
# norms into extended, single, and double precision. # |
| 8473 |
# Norms can be emulated w/ a regular fmove instruction. For # |
| 8474 |
# sgl/dbl, must scale exponent and perform an "fmove". Check to see # |
| 8475 |
# if the result would have overflowed/underflowed. If so, use unf_res() # |
| 8476 |
# or ovf_res() to return the default result. Also return EXOP if # |
| 8477 |
# exception is enabled. If no exception, return the default result. # |
| 8478 |
# Unnorms don't pass through here. # |
| 8479 |
# # |
| 8480 |
######################################################################### |
| 8481 |
|
| 8482 |
global fsin |
| 8483 |
fsin: |
| 8484 |
andi.b &0x30,%d0 # clear rnd prec |
| 8485 |
ori.b &s_mode*0x10,%d0 # insert sgl precision |
| 8486 |
bra.b fin |
| 8487 |
|
| 8488 |
global fdin |
| 8489 |
fdin: |
| 8490 |
andi.b &0x30,%d0 # clear rnd prec |
| 8491 |
ori.b &d_mode*0x10,%d0 # insert dbl precision |
| 8492 |
|
| 8493 |
global fin |
| 8494 |
fin: |
| 8495 |
mov.l %d0,L_SCR3(%a6) # store rnd info |
| 8496 |
|
| 8497 |
mov.b STAG(%a6),%d1 # fetch src optype tag |
| 8498 |
bne.w fin_not_norm # optimize on non-norm input |
| 8499 |
|
| 8500 |
# |
| 8501 |
# FP MOVE IN: NORMs and DENORMs ONLY! |
| 8502 |
# |
| 8503 |
fin_norm: |
| 8504 |
andi.b &0xc0,%d0 # is precision extended? |
| 8505 |
bne.w fin_not_ext # no, so go handle dbl or sgl |
| 8506 |
|
| 8507 |
# |
| 8508 |
# precision selected is extended. so...we cannot get an underflow |
| 8509 |
# or overflow because of rounding to the correct precision. so... |
| 8510 |
# skip the scaling and unscaling... |
| 8511 |
# |
| 8512 |
tst.b SRC_EX(%a0) # is the operand negative? |
| 8513 |
bpl.b fin_norm_done # no |
| 8514 |
bset &neg_bit,FPSR_CC(%a6) # yes, so set 'N' ccode bit |
| 8515 |
fin_norm_done: |
| 8516 |
fmovm.x SRC(%a0),&0x80 # return result in fp0 |
| 8517 |
rts |
| 8518 |
|
| 8519 |
# |
| 8520 |
# for an extended precision DENORM, the UNFL exception bit is set |
| 8521 |
# the accrued bit is NOT set in this instance(no inexactness!) |
| 8522 |
# |
| 8523 |
fin_denorm: |
| 8524 |
andi.b &0xc0,%d0 # is precision extended? |
| 8525 |
bne.w fin_not_ext # no, so go handle dbl or sgl |
| 8526 |
|
| 8527 |
bset &unfl_bit,FPSR_EXCEPT(%a6) # set unfl exc bit |
| 8528 |
tst.b SRC_EX(%a0) # is the operand negative? |
| 8529 |
bpl.b fin_denorm_done # no |
| 8530 |
bset &neg_bit,FPSR_CC(%a6) # yes, so set 'N' ccode bit |
| 8531 |
fin_denorm_done: |
| 8532 |
fmovm.x SRC(%a0),&0x80 # return result in fp0 |
| 8533 |
btst &unfl_bit,FPCR_ENABLE(%a6) # is UNFL enabled? |
| 8534 |
bne.b fin_denorm_unfl_ena # yes |
| 8535 |
rts |
| 8536 |
|
| 8537 |
# |
| 8538 |
# the input is an extended DENORM and underflow is enabled in the FPCR. |
| 8539 |
# normalize the mantissa and add the bias of 0x6000 to the resulting negative |
| 8540 |
# exponent and insert back into the operand. |
| 8541 |
# |
| 8542 |
fin_denorm_unfl_ena: |
| 8543 |
mov.w SRC_EX(%a0),FP_SCR0_EX(%a6) |
| 8544 |
mov.l SRC_HI(%a0),FP_SCR0_HI(%a6) |
| 8545 |
mov.l SRC_LO(%a0),FP_SCR0_LO(%a6) |
| 8546 |
lea FP_SCR0(%a6),%a0 # pass: ptr to operand |
| 8547 |
bsr.l norm # normalize result |
| 8548 |
neg.w %d0 # new exponent = -(shft val) |
| 8549 |
addi.w &0x6000,%d0 # add new bias to exponent |
| 8550 |
mov.w FP_SCR0_EX(%a6),%d1 # fetch old sign,exp |
| 8551 |
andi.w &0x8000,%d1 # keep old sign |
| 8552 |
andi.w &0x7fff,%d0 # clear sign position |
| 8553 |
or.w %d1,%d0 # concat new exo,old sign |
| 8554 |
mov.w %d0,FP_SCR0_EX(%a6) # insert new exponent |
| 8555 |
fmovm.x FP_SCR0(%a6),&0x40 # return EXOP in fp1 |
| 8556 |
rts |
| 8557 |
|
| 8558 |
# |
| 8559 |
# operand is to be rounded to single or double precision |
| 8560 |
# |
| 8561 |
fin_not_ext: |
| 8562 |
cmpi.b %d0,&s_mode*0x10 # separate sgl/dbl prec |
| 8563 |
bne.b fin_dbl |
| 8564 |
|
| 8565 |
# |
| 8566 |
# operand is to be rounded to single precision |
| 8567 |
# |
| 8568 |
fin_sgl: |
| 8569 |
mov.w SRC_EX(%a0),FP_SCR0_EX(%a6) |
| 8570 |
mov.l SRC_HI(%a0),FP_SCR0_HI(%a6) |
| 8571 |
mov.l SRC_LO(%a0),FP_SCR0_LO(%a6) |
| 8572 |
bsr.l scale_to_zero_src # calculate scale factor |
| 8573 |
|
| 8574 |
cmpi.l %d0,&0x3fff-0x3f80 # will move in underflow? |
| 8575 |
bge.w fin_sd_unfl # yes; go handle underflow |
| 8576 |
cmpi.l %d0,&0x3fff-0x407e # will move in overflow? |
| 8577 |
beq.w fin_sd_may_ovfl # maybe; go check |
| 8578 |
blt.w fin_sd_ovfl # yes; go handle overflow |
| 8579 |
|
| 8580 |
# |
| 8581 |
# operand will NOT overflow or underflow when moved into the fp reg file |
| 8582 |
# |
| 8583 |
fin_sd_normal: |
| 8584 |
fmov.l &0x0,%fpsr # clear FPSR |
| 8585 |
fmov.l L_SCR3(%a6),%fpcr # set FPCR |
| 8586 |
|
| 8587 |
fmov.x FP_SCR0(%a6),%fp0 # perform move |
| 8588 |
|
| 8589 |
fmov.l %fpsr,%d1 # save FPSR |
| 8590 |
fmov.l &0x0,%fpcr # clear FPCR |
| 8591 |
|
| 8592 |
or.l %d1,USER_FPSR(%a6) # save INEX2,N |
| 8593 |
|
| 8594 |
fin_sd_normal_exit: |
| 8595 |
mov.l %d2,-(%sp) # save d2 |
| 8596 |
fmovm.x &0x80,FP_SCR0(%a6) # store out result |
| 8597 |
mov.w FP_SCR0_EX(%a6),%d1 # load {sgn,exp} |
| 8598 |
mov.w %d1,%d2 # make a copy |
| 8599 |
andi.l &0x7fff,%d1 # strip sign |
| 8600 |
sub.l %d0,%d1 # add scale factor |
| 8601 |
andi.w &0x8000,%d2 # keep old sign |
| 8602 |
or.w %d1,%d2 # concat old sign,new exponent |
| 8603 |
mov.w %d2,FP_SCR0_EX(%a6) # insert new exponent |
| 8604 |
mov.l (%sp)+,%d2 # restore d2 |
| 8605 |
fmovm.x FP_SCR0(%a6),&0x80 # return result in fp0 |
| 8606 |
rts |
| 8607 |
|
| 8608 |
# |
| 8609 |
# operand is to be rounded to double precision |
| 8610 |
# |
| 8611 |
fin_dbl: |
| 8612 |
mov.w SRC_EX(%a0),FP_SCR0_EX(%a6) |
| 8613 |
mov.l SRC_HI(%a0),FP_SCR0_HI(%a6) |
| 8614 |
mov.l SRC_LO(%a0),FP_SCR0_LO(%a6) |
| 8615 |
bsr.l scale_to_zero_src # calculate scale factor |
| 8616 |
|
| 8617 |
cmpi.l %d0,&0x3fff-0x3c00 # will move in underflow? |
| 8618 |
bge.w fin_sd_unfl # yes; go handle underflow |
| 8619 |
cmpi.l %d0,&0x3fff-0x43fe # will move in overflow? |
| 8620 |
beq.w fin_sd_may_ovfl # maybe; go check |
| 8621 |
blt.w fin_sd_ovfl # yes; go handle overflow |
| 8622 |
bra.w fin_sd_normal # no; ho handle normalized op |
| 8623 |
|
| 8624 |
# |
| 8625 |
# operand WILL underflow when moved in to the fp register file |
| 8626 |
# |
| 8627 |
fin_sd_unfl: |
| 8628 |
bset &unfl_bit,FPSR_EXCEPT(%a6) # set unfl exc bit |
| 8629 |
|
| 8630 |
tst.b FP_SCR0_EX(%a6) # is operand negative? |
| 8631 |
bpl.b fin_sd_unfl_tst |
| 8632 |
bset &neg_bit,FPSR_CC(%a6) # set 'N' ccode bit |
| 8633 |
|
| 8634 |
# if underflow or inexact is enabled, then go calculate the EXOP first. |
| 8635 |
fin_sd_unfl_tst: |
| 8636 |
mov.b FPCR_ENABLE(%a6),%d1 |
| 8637 |
andi.b &0x0b,%d1 # is UNFL or INEX enabled? |
| 8638 |
bne.b fin_sd_unfl_ena # yes |
| 8639 |
|
| 8640 |
fin_sd_unfl_dis: |
| 8641 |
lea FP_SCR0(%a6),%a0 # pass: result addr |
| 8642 |
mov.l L_SCR3(%a6),%d1 # pass: rnd prec,mode |
| 8643 |
bsr.l unf_res # calculate default result |
| 8644 |
or.b %d0,FPSR_CC(%a6) # unf_res may have set 'Z' |
| 8645 |
fmovm.x FP_SCR0(%a6),&0x80 # return default result in fp0 |
| 8646 |
rts |
| 8647 |
|
| 8648 |
# |
| 8649 |
# operand will underflow AND underflow or inexact is enabled. |
| 8650 |
# Therefore, we must return the result rounded to extended precision. |
| 8651 |
# |
| 8652 |
fin_sd_unfl_ena: |
| 8653 |
mov.l FP_SCR0_HI(%a6),FP_SCR1_HI(%a6) |
| 8654 |
mov.l FP_SCR0_LO(%a6),FP_SCR1_LO(%a6) |
| 8655 |
mov.w FP_SCR0_EX(%a6),%d1 # load current exponent |
| 8656 |
|
| 8657 |
mov.l %d2,-(%sp) # save d2 |
| 8658 |
mov.w %d1,%d2 # make a copy |
| 8659 |
andi.l &0x7fff,%d1 # strip sign |
| 8660 |
sub.l %d0,%d1 # subtract scale factor |
| 8661 |
andi.w &0x8000,%d2 # extract old sign |
| 8662 |
addi.l &0x6000,%d1 # add new bias |
| 8663 |
andi.w &0x7fff,%d1 |
| 8664 |
or.w %d1,%d2 # concat old sign,new exp |
| 8665 |
mov.w %d2,FP_SCR1_EX(%a6) # insert new exponent |
| 8666 |
fmovm.x FP_SCR1(%a6),&0x40 # return EXOP in fp1 |
| 8667 |
mov.l (%sp)+,%d2 # restore d2 |
| 8668 |
bra.b fin_sd_unfl_dis |
| 8669 |
|
| 8670 |
# |
| 8671 |
# operand WILL overflow. |
| 8672 |
# |
| 8673 |
fin_sd_ovfl: |
| 8674 |
fmov.l &0x0,%fpsr # clear FPSR |
| 8675 |
fmov.l L_SCR3(%a6),%fpcr # set FPCR |
| 8676 |
|
| 8677 |
fmov.x FP_SCR0(%a6),%fp0 # perform move |
| 8678 |
|
| 8679 |
fmov.l &0x0,%fpcr # clear FPCR |
| 8680 |
fmov.l %fpsr,%d1 # save FPSR |
| 8681 |
|
| 8682 |
or.l %d1,USER_FPSR(%a6) # save INEX2,N |
| 8683 |
|
| 8684 |
fin_sd_ovfl_tst: |
| 8685 |
or.l &ovfl_inx_mask,USER_FPSR(%a6) # set ovfl/aovfl/ainex |
| 8686 |
|
| 8687 |
mov.b FPCR_ENABLE(%a6),%d1 |
| 8688 |
andi.b &0x13,%d1 # is OVFL or INEX enabled? |
| 8689 |
bne.b fin_sd_ovfl_ena # yes |
| 8690 |
|
| 8691 |
# |
| 8692 |
# OVFL is not enabled; therefore, we must create the default result by |
| 8693 |
# calling ovf_res(). |
| 8694 |
# |
| 8695 |
fin_sd_ovfl_dis: |
| 8696 |
btst &neg_bit,FPSR_CC(%a6) # is result negative? |
| 8697 |
sne %d1 # set sign param accordingly |
| 8698 |
mov.l L_SCR3(%a6),%d0 # pass: prec,mode |
| 8699 |
bsr.l ovf_res # calculate default result |
| 8700 |
or.b %d0,FPSR_CC(%a6) # set INF,N if applicable |
| 8701 |
fmovm.x (%a0),&0x80 # return default result in fp0 |
| 8702 |
rts |
| 8703 |
|
| 8704 |
# |
| 8705 |
# OVFL is enabled. |
| 8706 |
# the INEX2 bit has already been updated by the round to the correct precision. |
| 8707 |
# now, round to extended(and don't alter the FPSR). |
| 8708 |
# |
| 8709 |
fin_sd_ovfl_ena: |
| 8710 |
mov.l %d2,-(%sp) # save d2 |
| 8711 |
mov.w FP_SCR0_EX(%a6),%d1 # fetch {sgn,exp} |
| 8712 |
mov.l %d1,%d2 # make a copy |
| 8713 |
andi.l &0x7fff,%d1 # strip sign |
| 8714 |
andi.w &0x8000,%d2 # keep old sign |
| 8715 |
sub.l %d0,%d1 # add scale factor |
| 8716 |
sub.l &0x6000,%d1 # subtract bias |
| 8717 |
andi.w &0x7fff,%d1 |
| 8718 |
or.w %d2,%d1 |
| 8719 |
mov.w %d1,FP_SCR0_EX(%a6) # insert new exponent |
| 8720 |
mov.l (%sp)+,%d2 # restore d2 |
| 8721 |
fmovm.x FP_SCR0(%a6),&0x40 # return EXOP in fp1 |
| 8722 |
bra.b fin_sd_ovfl_dis |
| 8723 |
|
| 8724 |
# |
| 8725 |
# the move in MAY overflow. so... |
| 8726 |
# |
| 8727 |
fin_sd_may_ovfl: |
| 8728 |
fmov.l &0x0,%fpsr # clear FPSR |
| 8729 |
fmov.l L_SCR3(%a6),%fpcr # set FPCR |
| 8730 |
|
| 8731 |
fmov.x FP_SCR0(%a6),%fp0 # perform the move |
| 8732 |
|
| 8733 |
fmov.l %fpsr,%d1 # save status |
| 8734 |
fmov.l &0x0,%fpcr # clear FPCR |
| 8735 |
|
| 8736 |
or.l %d1,USER_FPSR(%a6) # save INEX2,N |
| 8737 |
|
| 8738 |
fabs.x %fp0,%fp1 # make a copy of result |
| 8739 |
fcmp.b %fp1,&0x2 # is |result| >= 2.b? |
| 8740 |
fbge.w fin_sd_ovfl_tst # yes; overflow has occurred |
| 8741 |
|
| 8742 |
# no, it didn't overflow; we have correct result |
| 8743 |
bra.w fin_sd_normal_exit |
| 8744 |
|
| 8745 |
########################################################################## |
| 8746 |
|
| 8747 |
# |
| 8748 |
# operand is not a NORM: check its optype and branch accordingly |
| 8749 |
# |
| 8750 |
fin_not_norm: |
| 8751 |
cmpi.b %d1,&DENORM # weed out DENORM |
| 8752 |
beq.w fin_denorm |
| 8753 |
cmpi.b %d1,&SNAN # weed out SNANs |
| 8754 |
beq.l res_snan_1op |
| 8755 |
cmpi.b %d1,&QNAN # weed out QNANs |
| 8756 |
beq.l res_qnan_1op |
| 8757 |
|
| 8758 |
# |
| 8759 |
# do the fmove in; at this point, only possible ops are ZERO and INF. |
| 8760 |
# use fmov to determine ccodes. |
| 8761 |
# prec:mode should be zero at this point but it won't affect answer anyways. |
| 8762 |
# |
| 8763 |
fmov.x SRC(%a0),%fp0 # do fmove in |
| 8764 |
fmov.l %fpsr,%d0 # no exceptions possible |
| 8765 |
rol.l &0x8,%d0 # put ccodes in lo byte |
| 8766 |
mov.b %d0,FPSR_CC(%a6) # insert correct ccodes |
| 8767 |
rts |
| 8768 |
|
| 8769 |
######################################################################### |
| 8770 |
# XDEF **************************************************************** # |
| 8771 |
# fdiv(): emulates the fdiv instruction # |
| 8772 |
# fsdiv(): emulates the fsdiv instruction # |
| 8773 |
# fddiv(): emulates the fddiv instruction # |
| 8774 |
# # |
| 8775 |
# XREF **************************************************************** # |
| 8776 |
# scale_to_zero_src() - scale src exponent to zero # |
| 8777 |
# scale_to_zero_dst() - scale dst exponent to zero # |
| 8778 |
# unf_res() - return default underflow result # |
| 8779 |
# ovf_res() - return default overflow result # |
| 8780 |
# res_qnan() - return QNAN result # |
| 8781 |
# res_snan() - return SNAN result # |
| 8782 |
# # |
| 8783 |
# INPUT *************************************************************** # |
| 8784 |
# a0 = pointer to extended precision source operand # |
| 8785 |
# a1 = pointer to extended precision destination operand # |
| 8786 |
# d0 rnd prec,mode # |
| 8787 |
# # |
| 8788 |
# OUTPUT ************************************************************** # |
| 8789 |
# fp0 = result # |
| 8790 |
# fp1 = EXOP (if exception occurred) # |
| 8791 |
# # |
| 8792 |
# ALGORITHM *********************************************************** # |
| 8793 |
# Handle NANs, infinities, and zeroes as special cases. Divide # |
| 8794 |
# norms/denorms into ext/sgl/dbl precision. # |
| 8795 |
# For norms/denorms, scale the exponents such that a divide # |
| 8796 |
# instruction won't cause an exception. Use the regular fdiv to # |
| 8797 |
# compute a result. Check if the regular operands would have taken # |
| 8798 |
# an exception. If so, return the default overflow/underflow result # |
| 8799 |
# and return the EXOP if exceptions are enabled. Else, scale the # |
| 8800 |
# result operand to the proper exponent. # |
| 8801 |
# # |
| 8802 |
######################################################################### |
| 8803 |
|
| 8804 |
align 0x10 |
| 8805 |
tbl_fdiv_unfl: |
| 8806 |
long 0x3fff - 0x0000 # ext_unfl |
| 8807 |
long 0x3fff - 0x3f81 # sgl_unfl |
| 8808 |
long 0x3fff - 0x3c01 # dbl_unfl |
| 8809 |
|
| 8810 |
tbl_fdiv_ovfl: |
| 8811 |
long 0x3fff - 0x7ffe # ext overflow exponent |
| 8812 |
long 0x3fff - 0x407e # sgl overflow exponent |
| 8813 |
long 0x3fff - 0x43fe # dbl overflow exponent |
| 8814 |
|
| 8815 |
global fsdiv |
| 8816 |
fsdiv: |
| 8817 |
andi.b &0x30,%d0 # clear rnd prec |
| 8818 |
ori.b &s_mode*0x10,%d0 # insert sgl prec |
| 8819 |
bra.b fdiv |
| 8820 |
|
| 8821 |
global fddiv |
| 8822 |
fddiv: |
| 8823 |
andi.b &0x30,%d0 # clear rnd prec |
| 8824 |
ori.b &d_mode*0x10,%d0 # insert dbl prec |
| 8825 |
|
| 8826 |
global fdiv |
| 8827 |
fdiv: |
| 8828 |
mov.l %d0,L_SCR3(%a6) # store rnd info |
| 8829 |
|
| 8830 |
clr.w %d1 |
| 8831 |
mov.b DTAG(%a6),%d1 |
| 8832 |
lsl.b &0x3,%d1 |
| 8833 |
or.b STAG(%a6),%d1 # combine src tags |
| 8834 |
|
| 8835 |
bne.w fdiv_not_norm # optimize on non-norm input |
| 8836 |
|
| 8837 |
# |
| 8838 |
# DIVIDE: NORMs and DENORMs ONLY! |
| 8839 |
# |
| 8840 |
fdiv_norm: |
| 8841 |
mov.w DST_EX(%a1),FP_SCR1_EX(%a6) |
| 8842 |
mov.l DST_HI(%a1),FP_SCR1_HI(%a6) |
| 8843 |
mov.l DST_LO(%a1),FP_SCR1_LO(%a6) |
| 8844 |
|
| 8845 |
mov.w SRC_EX(%a0),FP_SCR0_EX(%a6) |
| 8846 |
mov.l SRC_HI(%a0),FP_SCR0_HI(%a6) |
| 8847 |
mov.l SRC_LO(%a0),FP_SCR0_LO(%a6) |
| 8848 |
|
| 8849 |
bsr.l scale_to_zero_src # scale src exponent |
| 8850 |
mov.l %d0,-(%sp) # save scale factor 1 |
| 8851 |
|
| 8852 |
bsr.l scale_to_zero_dst # scale dst exponent |
| 8853 |
|
| 8854 |
neg.l (%sp) # SCALE FACTOR = scale1 - scale2 |
| 8855 |
add.l %d0,(%sp) |
| 8856 |
|
| 8857 |
mov.w 2+L_SCR3(%a6),%d1 # fetch precision |
| 8858 |
lsr.b &0x6,%d1 # shift to lo bits |
| 8859 |
mov.l (%sp)+,%d0 # load S.F. |
| 8860 |
cmp.l %d0,(tbl_fdiv_ovfl.b,%pc,%d1.w*4) # will result overflow? |
| 8861 |
ble.w fdiv_may_ovfl # result will overflow |
| 8862 |
|
| 8863 |
cmp.l %d0,(tbl_fdiv_unfl.w,%pc,%d1.w*4) # will result underflow? |
| 8864 |
beq.w fdiv_may_unfl # maybe |
| 8865 |
bgt.w fdiv_unfl # yes; go handle underflow |
| 8866 |
|
| 8867 |
fdiv_normal: |
| 8868 |
fmovm.x FP_SCR1(%a6),&0x80 # load dst op |
| 8869 |
|
| 8870 |
fmov.l L_SCR3(%a6),%fpcr # save FPCR |
| 8871 |
fmov.l &0x0,%fpsr # clear FPSR |
| 8872 |
|
| 8873 |
fdiv.x FP_SCR0(%a6),%fp0 # perform divide |
| 8874 |
|
| 8875 |
fmov.l %fpsr,%d1 # save FPSR |
| 8876 |
fmov.l &0x0,%fpcr # clear FPCR |
| 8877 |
|
| 8878 |
or.l %d1,USER_FPSR(%a6) # save INEX2,N |
| 8879 |
|
| 8880 |
fdiv_normal_exit: |
| 8881 |
fmovm.x &0x80,FP_SCR0(%a6) # store result on stack |
| 8882 |
mov.l %d2,-(%sp) # store d2 |
| 8883 |
mov.w FP_SCR0_EX(%a6),%d1 # load {sgn,exp} |
| 8884 |
mov.l %d1,%d2 # make a copy |
| 8885 |
andi.l &0x7fff,%d1 # strip sign |
| 8886 |
andi.w &0x8000,%d2 # keep old sign |
| 8887 |
sub.l %d0,%d1 # add scale factor |
| 8888 |
or.w %d2,%d1 # concat old sign,new exp |
| 8889 |
mov.w %d1,FP_SCR0_EX(%a6) # insert new exponent |
| 8890 |
mov.l (%sp)+,%d2 # restore d2 |
| 8891 |
fmovm.x FP_SCR0(%a6),&0x80 # return result in fp0 |
| 8892 |
rts |
| 8893 |
|
| 8894 |
tbl_fdiv_ovfl2: |
| 8895 |
long 0x7fff |
| 8896 |
long 0x407f |
| 8897 |
long 0x43ff |
| 8898 |
|
| 8899 |
fdiv_no_ovfl: |
| 8900 |
mov.l (%sp)+,%d0 # restore scale factor |
| 8901 |
bra.b fdiv_normal_exit |
| 8902 |
|
| 8903 |
fdiv_may_ovfl: |
| 8904 |
mov.l %d0,-(%sp) # save scale factor |
| 8905 |
|
| 8906 |
fmovm.x FP_SCR1(%a6),&0x80 # load dst op |
| 8907 |
|
| 8908 |
fmov.l L_SCR3(%a6),%fpcr # set FPCR |
| 8909 |
fmov.l &0x0,%fpsr # set FPSR |
| 8910 |
|
| 8911 |
fdiv.x FP_SCR0(%a6),%fp0 # execute divide |
| 8912 |
|
| 8913 |
fmov.l %fpsr,%d0 |
| 8914 |
fmov.l &0x0,%fpcr |
| 8915 |
|
| 8916 |
or.l %d0,USER_FPSR(%a6) # save INEX,N |
| 8917 |
|
| 8918 |
fmovm.x &0x01,-(%sp) # save result to stack |
| 8919 |
mov.w (%sp),%d0 # fetch new exponent |
| 8920 |
add.l &0xc,%sp # clear result from stack |
| 8921 |
andi.l &0x7fff,%d0 # strip sign |
| 8922 |
sub.l (%sp),%d0 # add scale factor |
| 8923 |
cmp.l %d0,(tbl_fdiv_ovfl2.b,%pc,%d1.w*4) |
| 8924 |
blt.b fdiv_no_ovfl |
| 8925 |
mov.l (%sp)+,%d0 |
| 8926 |
|
| 8927 |
fdiv_ovfl_tst: |
| 8928 |
or.l &ovfl_inx_mask,USER_FPSR(%a6) # set ovfl/aovfl/ainex |
| 8929 |
|
| 8930 |
mov.b FPCR_ENABLE(%a6),%d1 |
| 8931 |
andi.b &0x13,%d1 # is OVFL or INEX enabled? |
| 8932 |
bne.b fdiv_ovfl_ena # yes |
| 8933 |
|
| 8934 |
fdiv_ovfl_dis: |
| 8935 |
btst &neg_bit,FPSR_CC(%a6) # is result negative? |
| 8936 |
sne %d1 # set sign param accordingly |
| 8937 |
mov.l L_SCR3(%a6),%d0 # pass prec:rnd |
| 8938 |
bsr.l ovf_res # calculate default result |
| 8939 |
or.b %d0,FPSR_CC(%a6) # set INF if applicable |
| 8940 |
fmovm.x (%a0),&0x80 # return default result in fp0 |
| 8941 |
rts |
| 8942 |
|
| 8943 |
fdiv_ovfl_ena: |
| 8944 |
mov.l L_SCR3(%a6),%d1 |
| 8945 |
andi.b &0xc0,%d1 # is precision extended? |
| 8946 |
bne.b fdiv_ovfl_ena_sd # no, do sgl or dbl |
| 8947 |
|
| 8948 |
fdiv_ovfl_ena_cont: |
| 8949 |
fmovm.x &0x80,FP_SCR0(%a6) # move result to stack |
| 8950 |
|
| 8951 |
mov.l %d2,-(%sp) # save d2 |
| 8952 |
mov.w FP_SCR0_EX(%a6),%d1 # fetch {sgn,exp} |
| 8953 |
mov.w %d1,%d2 # make a copy |
| 8954 |
andi.l &0x7fff,%d1 # strip sign |
| 8955 |
sub.l %d0,%d1 # add scale factor |
| 8956 |
subi.l &0x6000,%d1 # subtract bias |
| 8957 |
andi.w &0x7fff,%d1 # clear sign bit |
| 8958 |
andi.w &0x8000,%d2 # keep old sign |
| 8959 |
or.w %d2,%d1 # concat old sign,new exp |
| 8960 |
mov.w %d1,FP_SCR0_EX(%a6) # insert new exponent |
| 8961 |
mov.l (%sp)+,%d2 # restore d2 |
| 8962 |
fmovm.x FP_SCR0(%a6),&0x40 # return EXOP in fp1 |
| 8963 |
bra.b fdiv_ovfl_dis |
| 8964 |
|
| 8965 |
fdiv_ovfl_ena_sd: |
| 8966 |
fmovm.x FP_SCR1(%a6),&0x80 # load dst operand |
| 8967 |
|
| 8968 |
mov.l L_SCR3(%a6),%d1 |
| 8969 |
andi.b &0x30,%d1 # keep rnd mode |
| 8970 |
fmov.l %d1,%fpcr # set FPCR |
| 8971 |
|
| 8972 |
fdiv.x FP_SCR0(%a6),%fp0 # execute divide |
| 8973 |
|
| 8974 |
fmov.l &0x0,%fpcr # clear FPCR |
| 8975 |
bra.b fdiv_ovfl_ena_cont |
| 8976 |
|
| 8977 |
fdiv_unfl: |
| 8978 |
bset &unfl_bit,FPSR_EXCEPT(%a6) # set unfl exc bit |
| 8979 |
|
| 8980 |
fmovm.x FP_SCR1(%a6),&0x80 # load dst op |
| 8981 |
|
| 8982 |
fmov.l &rz_mode*0x10,%fpcr # set FPCR |
| 8983 |
fmov.l &0x0,%fpsr # clear FPSR |
| 8984 |
|
| 8985 |
fdiv.x FP_SCR0(%a6),%fp0 # execute divide |
| 8986 |
|
| 8987 |
fmov.l %fpsr,%d1 # save status |
| 8988 |
fmov.l &0x0,%fpcr # clear FPCR |
| 8989 |
|
| 8990 |
or.l %d1,USER_FPSR(%a6) # save INEX2,N |
| 8991 |
|
| 8992 |
mov.b FPCR_ENABLE(%a6),%d1 |
| 8993 |
andi.b &0x0b,%d1 # is UNFL or INEX enabled? |
| 8994 |
bne.b fdiv_unfl_ena # yes |
| 8995 |
|
| 8996 |
fdiv_unfl_dis: |
| 8997 |
fmovm.x &0x80,FP_SCR0(%a6) # store out result |
| 8998 |
|
| 8999 |
lea FP_SCR0(%a6),%a0 # pass: result addr |
| 9000 |
mov.l L_SCR3(%a6),%d1 # pass: rnd prec,mode |
| 9001 |
bsr.l unf_res # calculate default result |
| 9002 |
or.b %d0,FPSR_CC(%a6) # 'Z' may have been set |
| 9003 |
fmovm.x FP_SCR0(%a6),&0x80 # return default result in fp0 |
| 9004 |
rts |
| 9005 |
|
| 9006 |
# |
| 9007 |
# UNFL is enabled. |
| 9008 |
# |
| 9009 |
fdiv_unfl_ena: |
| 9010 |
fmovm.x FP_SCR1(%a6),&0x40 # load dst op |
| 9011 |
|
| 9012 |
mov.l L_SCR3(%a6),%d1 |
| 9013 |
andi.b &0xc0,%d1 # is precision extended? |
| 9014 |
bne.b fdiv_unfl_ena_sd # no, sgl or dbl |
| 9015 |
|
| 9016 |
fmov.l L_SCR3(%a6),%fpcr # set FPCR |
| 9017 |
|
| 9018 |
fdiv_unfl_ena_cont: |
| 9019 |
fmov.l &0x0,%fpsr # clear FPSR |
| 9020 |
|
| 9021 |
fdiv.x FP_SCR0(%a6),%fp1 # execute divide |
| 9022 |
|
| 9023 |
fmov.l &0x0,%fpcr # clear FPCR |
| 9024 |
|
| 9025 |
fmovm.x &0x40,FP_SCR0(%a6) # save result to stack |
| 9026 |
mov.l %d2,-(%sp) # save d2 |
| 9027 |
mov.w FP_SCR0_EX(%a6),%d1 # fetch {sgn,exp} |
| 9028 |
mov.l %d1,%d2 # make a copy |
| 9029 |
andi.l &0x7fff,%d1 # strip sign |
| 9030 |
andi.w &0x8000,%d2 # keep old sign |
| 9031 |
sub.l %d0,%d1 # add scale factoer |
| 9032 |
addi.l &0x6000,%d1 # add bias |
| 9033 |
andi.w &0x7fff,%d1 |
| 9034 |
or.w %d2,%d1 # concat old sign,new exp |
| 9035 |
mov.w %d1,FP_SCR0_EX(%a6) # insert new exp |
| 9036 |
mov.l (%sp)+,%d2 # restore d2 |
| 9037 |
fmovm.x FP_SCR0(%a6),&0x40 # return EXOP in fp1 |
| 9038 |
bra.w fdiv_unfl_dis |
| 9039 |
|
| 9040 |
fdiv_unfl_ena_sd: |
| 9041 |
mov.l L_SCR3(%a6),%d1 |
| 9042 |
andi.b &0x30,%d1 # use only rnd mode |
| 9043 |
fmov.l %d1,%fpcr # set FPCR |
| 9044 |
|
| 9045 |
bra.b fdiv_unfl_ena_cont |
| 9046 |
|
| 9047 |
# |
| 9048 |
# the divide operation MAY underflow: |
| 9049 |
# |
| 9050 |
fdiv_may_unfl: |
| 9051 |
fmovm.x FP_SCR1(%a6),&0x80 # load dst op |
| 9052 |
|
| 9053 |
fmov.l L_SCR3(%a6),%fpcr # set FPCR |
| 9054 |
fmov.l &0x0,%fpsr # clear FPSR |
| 9055 |
|
| 9056 |
fdiv.x FP_SCR0(%a6),%fp0 # execute divide |
| 9057 |
|
| 9058 |
fmov.l %fpsr,%d1 # save status |
| 9059 |
fmov.l &0x0,%fpcr # clear FPCR |
| 9060 |
|
| 9061 |
or.l %d1,USER_FPSR(%a6) # save INEX2,N |
| 9062 |
|
| 9063 |
fabs.x %fp0,%fp1 # make a copy of result |
| 9064 |
fcmp.b %fp1,&0x1 # is |result| > 1.b? |
| 9065 |
fbgt.w fdiv_normal_exit # no; no underflow occurred |
| 9066 |
fblt.w fdiv_unfl # yes; underflow occurred |
| 9067 |
|
| 9068 |
# |
| 9069 |
# we still don't know if underflow occurred. result is ~ equal to 1. but, |
| 9070 |
# we don't know if the result was an underflow that rounded up to a 1 |
| 9071 |
# or a normalized number that rounded down to a 1. so, redo the entire |
| 9072 |
# operation using RZ as the rounding mode to see what the pre-rounded |
| 9073 |
# result is. this case should be relatively rare. |
| 9074 |
# |
| 9075 |
fmovm.x FP_SCR1(%a6),&0x40 # load dst op into fp1 |
| 9076 |
|
| 9077 |
mov.l L_SCR3(%a6),%d1 |
| 9078 |
andi.b &0xc0,%d1 # keep rnd prec |
| 9079 |
ori.b &rz_mode*0x10,%d1 # insert RZ |
| 9080 |
|
| 9081 |
fmov.l %d1,%fpcr # set FPCR |
| 9082 |
fmov.l &0x0,%fpsr # clear FPSR |
| 9083 |
|
| 9084 |
fdiv.x FP_SCR0(%a6),%fp1 # execute divide |
| 9085 |
|
| 9086 |
fmov.l &0x0,%fpcr # clear FPCR |
| 9087 |
fabs.x %fp1 # make absolute value |
| 9088 |
fcmp.b %fp1,&0x1 # is |result| < 1.b? |
| 9089 |
fbge.w fdiv_normal_exit # no; no underflow occurred |
| 9090 |
bra.w fdiv_unfl # yes; underflow occurred |
| 9091 |
|
| 9092 |
############################################################################ |
| 9093 |
|
| 9094 |
# |
| 9095 |
# Divide: inputs are not both normalized; what are they? |
| 9096 |
# |
| 9097 |
fdiv_not_norm: |
| 9098 |
mov.w (tbl_fdiv_op.b,%pc,%d1.w*2),%d1 |
| 9099 |
jmp (tbl_fdiv_op.b,%pc,%d1.w*1) |
| 9100 |
|
| 9101 |
swbeg &48 |
| 9102 |
tbl_fdiv_op: |
| 9103 |
short fdiv_norm - tbl_fdiv_op # NORM / NORM |
| 9104 |
short fdiv_inf_load - tbl_fdiv_op # NORM / ZERO |
| 9105 |
short fdiv_zero_load - tbl_fdiv_op # NORM / INF |
| 9106 |
short fdiv_res_qnan - tbl_fdiv_op # NORM / QNAN |
| 9107 |
short fdiv_norm - tbl_fdiv_op # NORM / DENORM |
| 9108 |
short fdiv_res_snan - tbl_fdiv_op # NORM / SNAN |
| 9109 |
short tbl_fdiv_op - tbl_fdiv_op # |
| 9110 |
short tbl_fdiv_op - tbl_fdiv_op # |
| 9111 |
|
| 9112 |
short fdiv_zero_load - tbl_fdiv_op # ZERO / NORM |
| 9113 |
short fdiv_res_operr - tbl_fdiv_op # ZERO / ZERO |
| 9114 |
short fdiv_zero_load - tbl_fdiv_op # ZERO / INF |
| 9115 |
short fdiv_res_qnan - tbl_fdiv_op # ZERO / QNAN |
| 9116 |
short fdiv_zero_load - tbl_fdiv_op # ZERO / DENORM |
| 9117 |
short fdiv_res_snan - tbl_fdiv_op # ZERO / SNAN |
| 9118 |
short tbl_fdiv_op - tbl_fdiv_op # |
| 9119 |
short tbl_fdiv_op - tbl_fdiv_op # |
| 9120 |
|
| 9121 |
short fdiv_inf_dst - tbl_fdiv_op # INF / NORM |
| 9122 |
short fdiv_inf_dst - tbl_fdiv_op # INF / ZERO |
| 9123 |
short fdiv_res_operr - tbl_fdiv_op # INF / INF |
| 9124 |
short fdiv_res_qnan - tbl_fdiv_op # INF / QNAN |
| 9125 |
short fdiv_inf_dst - tbl_fdiv_op # INF / DENORM |
| 9126 |
short fdiv_res_snan - tbl_fdiv_op # INF / SNAN |
| 9127 |
short tbl_fdiv_op - tbl_fdiv_op # |
| 9128 |
short tbl_fdiv_op - tbl_fdiv_op # |
| 9129 |
|
| 9130 |
short fdiv_res_qnan - tbl_fdiv_op # QNAN / NORM |
| 9131 |
short fdiv_res_qnan - tbl_fdiv_op # QNAN / ZERO |
| 9132 |
short fdiv_res_qnan - tbl_fdiv_op # QNAN / INF |
| 9133 |
short fdiv_res_qnan - tbl_fdiv_op # QNAN / QNAN |
| 9134 |
short fdiv_res_qnan - tbl_fdiv_op # QNAN / DENORM |
| 9135 |
short fdiv_res_snan - tbl_fdiv_op # QNAN / SNAN |
| 9136 |
short tbl_fdiv_op - tbl_fdiv_op # |
| 9137 |
short tbl_fdiv_op - tbl_fdiv_op # |
| 9138 |
|
| 9139 |
short fdiv_norm - tbl_fdiv_op # DENORM / NORM |
| 9140 |
short fdiv_inf_load - tbl_fdiv_op # DENORM / ZERO |
| 9141 |
short fdiv_zero_load - tbl_fdiv_op # DENORM / INF |
| 9142 |
short fdiv_res_qnan - tbl_fdiv_op # DENORM / QNAN |
| 9143 |
short fdiv_norm - tbl_fdiv_op # DENORM / DENORM |
| 9144 |
short fdiv_res_snan - tbl_fdiv_op # DENORM / SNAN |
| 9145 |
short tbl_fdiv_op - tbl_fdiv_op # |
| 9146 |
short tbl_fdiv_op - tbl_fdiv_op # |
| 9147 |
|
| 9148 |
short fdiv_res_snan - tbl_fdiv_op # SNAN / NORM |
| 9149 |
short fdiv_res_snan - tbl_fdiv_op # SNAN / ZERO |
| 9150 |
short fdiv_res_snan - tbl_fdiv_op # SNAN / INF |
| 9151 |
short fdiv_res_snan - tbl_fdiv_op # SNAN / QNAN |
| 9152 |
short fdiv_res_snan - tbl_fdiv_op # SNAN / DENORM |
| 9153 |
short fdiv_res_snan - tbl_fdiv_op # SNAN / SNAN |
| 9154 |
short tbl_fdiv_op - tbl_fdiv_op # |
| 9155 |
short tbl_fdiv_op - tbl_fdiv_op # |
| 9156 |
|
| 9157 |
fdiv_res_qnan: |
| 9158 |
bra.l res_qnan |
| 9159 |
fdiv_res_snan: |
| 9160 |
bra.l res_snan |
| 9161 |
fdiv_res_operr: |
| 9162 |
bra.l res_operr |
| 9163 |
|
| 9164 |
global fdiv_zero_load # global for fsgldiv |
| 9165 |
fdiv_zero_load: |
| 9166 |
mov.b SRC_EX(%a0),%d0 # result sign is exclusive |
| 9167 |
mov.b DST_EX(%a1),%d1 # or of input signs. |
| 9168 |
eor.b %d0,%d1 |
| 9169 |
bpl.b fdiv_zero_load_p # result is positive |
| 9170 |
fmov.s &0x80000000,%fp0 # load a -ZERO |
| 9171 |
mov.b &z_bmask+neg_bmask,FPSR_CC(%a6) # set Z/N |
| 9172 |
rts |
| 9173 |
fdiv_zero_load_p: |
| 9174 |
fmov.s &0x00000000,%fp0 # load a +ZERO |
| 9175 |
mov.b &z_bmask,FPSR_CC(%a6) # set Z |
| 9176 |
rts |
| 9177 |
|
| 9178 |
# |
| 9179 |
# The destination was In Range and the source was a ZERO. The result, |
| 9180 |
# Therefore, is an INF w/ the proper sign. |
| 9181 |
# So, determine the sign and return a new INF (w/ the j-bit cleared). |
| 9182 |
# |
| 9183 |
global fdiv_inf_load # global for fsgldiv |
| 9184 |
fdiv_inf_load: |
| 9185 |
ori.w &dz_mask+adz_mask,2+USER_FPSR(%a6) # no; set DZ/ADZ |
| 9186 |
mov.b SRC_EX(%a0),%d0 # load both signs |
| 9187 |
mov.b DST_EX(%a1),%d1 |
| 9188 |
eor.b %d0,%d1 |
| 9189 |
bpl.b fdiv_inf_load_p # result is positive |
| 9190 |
fmov.s &0xff800000,%fp0 # make result -INF |
| 9191 |
mov.b &inf_bmask+neg_bmask,FPSR_CC(%a6) # set INF/N |
| 9192 |
rts |
| 9193 |
fdiv_inf_load_p: |
| 9194 |
fmov.s &0x7f800000,%fp0 # make result +INF |
| 9195 |
mov.b &inf_bmask,FPSR_CC(%a6) # set INF |
| 9196 |
rts |
| 9197 |
|
| 9198 |
# |
| 9199 |
# The destination was an INF w/ an In Range or ZERO source, the result is |
| 9200 |
# an INF w/ the proper sign. |
| 9201 |
# The 68881/882 returns the destination INF w/ the new sign(if the j-bit of the |
| 9202 |
# dst INF is set, then then j-bit of the result INF is also set). |
| 9203 |
# |
| 9204 |
global fdiv_inf_dst # global for fsgldiv |
| 9205 |
fdiv_inf_dst: |
| 9206 |
mov.b DST_EX(%a1),%d0 # load both signs |
| 9207 |
mov.b SRC_EX(%a0),%d1 |
| 9208 |
eor.b %d0,%d1 |
| 9209 |
bpl.b fdiv_inf_dst_p # result is positive |
| 9210 |
|
| 9211 |
fmovm.x DST(%a1),&0x80 # return result in fp0 |
| 9212 |
fabs.x %fp0 # clear sign bit |
| 9213 |
fneg.x %fp0 # set sign bit |
| 9214 |
mov.b &inf_bmask+neg_bmask,FPSR_CC(%a6) # set INF/NEG |
| 9215 |
rts |
| 9216 |
|
| 9217 |
fdiv_inf_dst_p: |
| 9218 |
fmovm.x DST(%a1),&0x80 # return result in fp0 |
| 9219 |
fabs.x %fp0 # return positive INF |
| 9220 |
mov.b &inf_bmask,FPSR_CC(%a6) # set INF |
| 9221 |
rts |
| 9222 |
|
| 9223 |
######################################################################### |
| 9224 |
# XDEF **************************************************************** # |
| 9225 |
# fneg(): emulates the fneg instruction # |
| 9226 |
# fsneg(): emulates the fsneg instruction # |
| 9227 |
# fdneg(): emulates the fdneg instruction # |
| 9228 |
# # |
| 9229 |
# XREF **************************************************************** # |
| 9230 |
# norm() - normalize a denorm to provide EXOP # |
| 9231 |
# scale_to_zero_src() - scale sgl/dbl source exponent # |
| 9232 |
# ovf_res() - return default overflow result # |
| 9233 |
# unf_res() - return default underflow result # |
| 9234 |
# res_qnan_1op() - return QNAN result # |
| 9235 |
# res_snan_1op() - return SNAN result # |
| 9236 |
# # |
| 9237 |
# INPUT *************************************************************** # |
| 9238 |
# a0 = pointer to extended precision source operand # |
| 9239 |
# d0 = rnd prec,mode # |
| 9240 |
# # |
| 9241 |
# OUTPUT ************************************************************** # |
| 9242 |
# fp0 = result # |
| 9243 |
# fp1 = EXOP (if exception occurred) # |
| 9244 |
# # |
| 9245 |
# ALGORITHM *********************************************************** # |
| 9246 |
# Handle NANs, zeroes, and infinities as special cases. Separate # |
| 9247 |
# norms/denorms into ext/sgl/dbl precisions. Extended precision can be # |
| 9248 |
# emulated by simply setting sign bit. Sgl/dbl operands must be scaled # |
| 9249 |
# and an actual fneg performed to see if overflow/underflow would have # |
| 9250 |
# occurred. If so, return default underflow/overflow result. Else, # |
| 9251 |
# scale the result exponent and return result. FPSR gets set based on # |
| 9252 |
# the result value. # |
| 9253 |
# # |
| 9254 |
######################################################################### |
| 9255 |
|
| 9256 |
global fsneg |
| 9257 |
fsneg: |
| 9258 |
andi.b &0x30,%d0 # clear rnd prec |
| 9259 |
ori.b &s_mode*0x10,%d0 # insert sgl precision |
| 9260 |
bra.b fneg |
| 9261 |
|
| 9262 |
global fdneg |
| 9263 |
fdneg: |
| 9264 |
andi.b &0x30,%d0 # clear rnd prec |
| 9265 |
ori.b &d_mode*0x10,%d0 # insert dbl prec |
| 9266 |
|
| 9267 |
global fneg |
| 9268 |
fneg: |
| 9269 |
mov.l %d0,L_SCR3(%a6) # store rnd info |
| 9270 |
mov.b STAG(%a6),%d1 |
| 9271 |
bne.w fneg_not_norm # optimize on non-norm input |
| 9272 |
|
| 9273 |
# |
| 9274 |
# NEGATE SIGN : norms and denorms ONLY! |
| 9275 |
# |
| 9276 |
fneg_norm: |
| 9277 |
andi.b &0xc0,%d0 # is precision extended? |
| 9278 |
bne.w fneg_not_ext # no; go handle sgl or dbl |
| 9279 |
|
| 9280 |
# |
| 9281 |
# precision selected is extended. so...we can not get an underflow |
| 9282 |
# or overflow because of rounding to the correct precision. so... |
| 9283 |
# skip the scaling and unscaling... |
| 9284 |
# |
| 9285 |
mov.l SRC_HI(%a0),FP_SCR0_HI(%a6) |
| 9286 |
mov.l SRC_LO(%a0),FP_SCR0_LO(%a6) |
| 9287 |
mov.w SRC_EX(%a0),%d0 |
| 9288 |
eori.w &0x8000,%d0 # negate sign |
| 9289 |
bpl.b fneg_norm_load # sign is positive |
| 9290 |
mov.b &neg_bmask,FPSR_CC(%a6) # set 'N' ccode bit |
| 9291 |
fneg_norm_load: |
| 9292 |
mov.w %d0,FP_SCR0_EX(%a6) |
| 9293 |
fmovm.x FP_SCR0(%a6),&0x80 # return result in fp0 |
| 9294 |
rts |
| 9295 |
|
| 9296 |
# |
| 9297 |
# for an extended precision DENORM, the UNFL exception bit is set |
| 9298 |
# the accrued bit is NOT set in this instance(no inexactness!) |
| 9299 |
# |
| 9300 |
fneg_denorm: |
| 9301 |
andi.b &0xc0,%d0 # is precision extended? |
| 9302 |
bne.b fneg_not_ext # no; go handle sgl or dbl |
| 9303 |
|
| 9304 |
bset &unfl_bit,FPSR_EXCEPT(%a6) # set unfl exc bit |
| 9305 |
|
| 9306 |
mov.l SRC_HI(%a0),FP_SCR0_HI(%a6) |
| 9307 |
mov.l SRC_LO(%a0),FP_SCR0_LO(%a6) |
| 9308 |
mov.w SRC_EX(%a0),%d0 |
| 9309 |
eori.w &0x8000,%d0 # negate sign |
| 9310 |
bpl.b fneg_denorm_done # no |
| 9311 |
mov.b &neg_bmask,FPSR_CC(%a6) # yes, set 'N' ccode bit |
| 9312 |
fneg_denorm_done: |
| 9313 |
mov.w %d0,FP_SCR0_EX(%a6) |
| 9314 |
fmovm.x FP_SCR0(%a6),&0x80 # return default result in fp0 |
| 9315 |
|
| 9316 |
btst &unfl_bit,FPCR_ENABLE(%a6) # is UNFL enabled? |
| 9317 |
bne.b fneg_ext_unfl_ena # yes |
| 9318 |
rts |
| 9319 |
|
| 9320 |
# |
| 9321 |
# the input is an extended DENORM and underflow is enabled in the FPCR. |
| 9322 |
# normalize the mantissa and add the bias of 0x6000 to the resulting negative |
| 9323 |
# exponent and insert back into the operand. |
| 9324 |
# |
| 9325 |
fneg_ext_unfl_ena: |
| 9326 |
lea FP_SCR0(%a6),%a0 # pass: ptr to operand |
| 9327 |
bsr.l norm # normalize result |
| 9328 |
neg.w %d0 # new exponent = -(shft val) |
| 9329 |
addi.w &0x6000,%d0 # add new bias to exponent |
| 9330 |
mov.w FP_SCR0_EX(%a6),%d1 # fetch old sign,exp |
| 9331 |
andi.w &0x8000,%d1 # keep old sign |
| 9332 |
andi.w &0x7fff,%d0 # clear sign position |
| 9333 |
or.w %d1,%d0 # concat old sign, new exponent |
| 9334 |
mov.w %d0,FP_SCR0_EX(%a6) # insert new exponent |
| 9335 |
fmovm.x FP_SCR0(%a6),&0x40 # return EXOP in fp1 |
| 9336 |
rts |
| 9337 |
|
| 9338 |
# |
| 9339 |
# operand is either single or double |
| 9340 |
# |
| 9341 |
fneg_not_ext: |
| 9342 |
cmpi.b %d0,&s_mode*0x10 # separate sgl/dbl prec |
| 9343 |
bne.b fneg_dbl |
| 9344 |
|
| 9345 |
# |
| 9346 |
# operand is to be rounded to single precision |
| 9347 |
# |
| 9348 |
fneg_sgl: |
| 9349 |
mov.w SRC_EX(%a0),FP_SCR0_EX(%a6) |
| 9350 |
mov.l SRC_HI(%a0),FP_SCR0_HI(%a6) |
| 9351 |
mov.l SRC_LO(%a0),FP_SCR0_LO(%a6) |
| 9352 |
bsr.l scale_to_zero_src # calculate scale factor |
| 9353 |
|
| 9354 |
cmpi.l %d0,&0x3fff-0x3f80 # will move in underflow? |
| 9355 |
bge.w fneg_sd_unfl # yes; go handle underflow |
| 9356 |
cmpi.l %d0,&0x3fff-0x407e # will move in overflow? |
| 9357 |
beq.w fneg_sd_may_ovfl # maybe; go check |
| 9358 |
blt.w fneg_sd_ovfl # yes; go handle overflow |
| 9359 |
|
| 9360 |
# |
| 9361 |
# operand will NOT overflow or underflow when moved in to the fp reg file |
| 9362 |
# |
| 9363 |
fneg_sd_normal: |
| 9364 |
fmov.l &0x0,%fpsr # clear FPSR |
| 9365 |
fmov.l L_SCR3(%a6),%fpcr # set FPCR |
| 9366 |
|
| 9367 |
fneg.x FP_SCR0(%a6),%fp0 # perform negation |
| 9368 |
|
| 9369 |
fmov.l %fpsr,%d1 # save FPSR |
| 9370 |
fmov.l &0x0,%fpcr # clear FPCR |
| 9371 |
|
| 9372 |
or.l %d1,USER_FPSR(%a6) # save INEX2,N |
| 9373 |
|
| 9374 |
fneg_sd_normal_exit: |
| 9375 |
mov.l %d2,-(%sp) # save d2 |
| 9376 |
fmovm.x &0x80,FP_SCR0(%a6) # store out result |
| 9377 |
mov.w FP_SCR0_EX(%a6),%d1 # load sgn,exp |
| 9378 |
mov.w %d1,%d2 # make a copy |
| 9379 |
andi.l &0x7fff,%d1 # strip sign |
| 9380 |
sub.l %d0,%d1 # add scale factor |
| 9381 |
andi.w &0x8000,%d2 # keep old sign |
| 9382 |
or.w %d1,%d2 # concat old sign,new exp |
| 9383 |
mov.w %d2,FP_SCR0_EX(%a6) # insert new exponent |
| 9384 |
mov.l (%sp)+,%d2 # restore d2 |
| 9385 |
fmovm.x FP_SCR0(%a6),&0x80 # return result in fp0 |
| 9386 |
rts |
| 9387 |
|
| 9388 |
# |
| 9389 |
# operand is to be rounded to double precision |
| 9390 |
# |
| 9391 |
fneg_dbl: |
| 9392 |
mov.w SRC_EX(%a0),FP_SCR0_EX(%a6) |
| 9393 |
mov.l SRC_HI(%a0),FP_SCR0_HI(%a6) |
| 9394 |
mov.l SRC_LO(%a0),FP_SCR0_LO(%a6) |
| 9395 |
bsr.l scale_to_zero_src # calculate scale factor |
| 9396 |
|
| 9397 |
cmpi.l %d0,&0x3fff-0x3c00 # will move in underflow? |
| 9398 |
bge.b fneg_sd_unfl # yes; go handle underflow |
| 9399 |
cmpi.l %d0,&0x3fff-0x43fe # will move in overflow? |
| 9400 |
beq.w fneg_sd_may_ovfl # maybe; go check |
| 9401 |
blt.w fneg_sd_ovfl # yes; go handle overflow |
| 9402 |
bra.w fneg_sd_normal # no; ho handle normalized op |
| 9403 |
|
| 9404 |
# |
| 9405 |
# operand WILL underflow when moved in to the fp register file |
| 9406 |
# |
| 9407 |
fneg_sd_unfl: |
| 9408 |
bset &unfl_bit,FPSR_EXCEPT(%a6) # set unfl exc bit |
| 9409 |
|
| 9410 |
eori.b &0x80,FP_SCR0_EX(%a6) # negate sign |
| 9411 |
bpl.b fneg_sd_unfl_tst |
| 9412 |
bset &neg_bit,FPSR_CC(%a6) # set 'N' ccode bit |
| 9413 |
|
| 9414 |
# if underflow or inexact is enabled, go calculate EXOP first. |
| 9415 |
fneg_sd_unfl_tst: |
| 9416 |
mov.b FPCR_ENABLE(%a6),%d1 |
| 9417 |
andi.b &0x0b,%d1 # is UNFL or INEX enabled? |
| 9418 |
bne.b fneg_sd_unfl_ena # yes |
| 9419 |
|
| 9420 |
fneg_sd_unfl_dis: |
| 9421 |
lea FP_SCR0(%a6),%a0 # pass: result addr |
| 9422 |
mov.l L_SCR3(%a6),%d1 # pass: rnd prec,mode |
| 9423 |
bsr.l unf_res # calculate default result |
| 9424 |
or.b %d0,FPSR_CC(%a6) # unf_res may have set 'Z' |
| 9425 |
fmovm.x FP_SCR0(%a6),&0x80 # return default result in fp0 |
| 9426 |
rts |
| 9427 |
|
| 9428 |
# |
| 9429 |
# operand will underflow AND underflow is enabled. |
| 9430 |
# Therefore, we must return the result rounded to extended precision. |
| 9431 |
# |
| 9432 |
fneg_sd_unfl_ena: |
| 9433 |
mov.l FP_SCR0_HI(%a6),FP_SCR1_HI(%a6) |
| 9434 |
mov.l FP_SCR0_LO(%a6),FP_SCR1_LO(%a6) |
| 9435 |
mov.w FP_SCR0_EX(%a6),%d1 # load current exponent |
| 9436 |
|
| 9437 |
mov.l %d2,-(%sp) # save d2 |
| 9438 |
mov.l %d1,%d2 # make a copy |
| 9439 |
andi.l &0x7fff,%d1 # strip sign |
| 9440 |
andi.w &0x8000,%d2 # keep old sign |
| 9441 |
sub.l %d0,%d1 # subtract scale factor |
| 9442 |
addi.l &0x6000,%d1 # add new bias |
| 9443 |
andi.w &0x7fff,%d1 |
| 9444 |
or.w %d2,%d1 # concat new sign,new exp |
| 9445 |
mov.w %d1,FP_SCR1_EX(%a6) # insert new exp |
| 9446 |
fmovm.x FP_SCR1(%a6),&0x40 # return EXOP in fp1 |
| 9447 |
mov.l (%sp)+,%d2 # restore d2 |
| 9448 |
bra.b fneg_sd_unfl_dis |
| 9449 |
|
| 9450 |
# |
| 9451 |
# operand WILL overflow. |
| 9452 |
# |
| 9453 |
fneg_sd_ovfl: |
| 9454 |
fmov.l &0x0,%fpsr # clear FPSR |
| 9455 |
fmov.l L_SCR3(%a6),%fpcr # set FPCR |
| 9456 |
|
| 9457 |
fneg.x FP_SCR0(%a6),%fp0 # perform negation |
| 9458 |
|
| 9459 |
fmov.l &0x0,%fpcr # clear FPCR |
| 9460 |
fmov.l %fpsr,%d1 # save FPSR |
| 9461 |
|
| 9462 |
or.l %d1,USER_FPSR(%a6) # save INEX2,N |
| 9463 |
|
| 9464 |
fneg_sd_ovfl_tst: |
| 9465 |
or.l &ovfl_inx_mask,USER_FPSR(%a6) # set ovfl/aovfl/ainex |
| 9466 |
|
| 9467 |
mov.b FPCR_ENABLE(%a6),%d1 |
| 9468 |
andi.b &0x13,%d1 # is OVFL or INEX enabled? |
| 9469 |
bne.b fneg_sd_ovfl_ena # yes |
| 9470 |
|
| 9471 |
# |
| 9472 |
# OVFL is not enabled; therefore, we must create the default result by |
| 9473 |
# calling ovf_res(). |
| 9474 |
# |
| 9475 |
fneg_sd_ovfl_dis: |
| 9476 |
btst &neg_bit,FPSR_CC(%a6) # is result negative? |
| 9477 |
sne %d1 # set sign param accordingly |
| 9478 |
mov.l L_SCR3(%a6),%d0 # pass: prec,mode |
| 9479 |
bsr.l ovf_res # calculate default result |
| 9480 |
or.b %d0,FPSR_CC(%a6) # set INF,N if applicable |
| 9481 |
fmovm.x (%a0),&0x80 # return default result in fp0 |
| 9482 |
rts |
| 9483 |
|
| 9484 |
# |
| 9485 |
# OVFL is enabled. |
| 9486 |
# the INEX2 bit has already been updated by the round to the correct precision. |
| 9487 |
# now, round to extended(and don't alter the FPSR). |
| 9488 |
# |
| 9489 |
fneg_sd_ovfl_ena: |
| 9490 |
mov.l %d2,-(%sp) # save d2 |
| 9491 |
mov.w FP_SCR0_EX(%a6),%d1 # fetch {sgn,exp} |
| 9492 |
mov.l %d1,%d2 # make a copy |
| 9493 |
andi.l &0x7fff,%d1 # strip sign |
| 9494 |
andi.w &0x8000,%d2 # keep old sign |
| 9495 |
sub.l %d0,%d1 # add scale factor |
| 9496 |
subi.l &0x6000,%d1 # subtract bias |
| 9497 |
andi.w &0x7fff,%d1 |
| 9498 |
or.w %d2,%d1 # concat sign,exp |
| 9499 |
mov.w %d1,FP_SCR0_EX(%a6) # insert new exponent |
| 9500 |
fmovm.x FP_SCR0(%a6),&0x40 # return EXOP in fp1 |
| 9501 |
mov.l (%sp)+,%d2 # restore d2 |
| 9502 |
bra.b fneg_sd_ovfl_dis |
| 9503 |
|
| 9504 |
# |
| 9505 |
# the move in MAY underflow. so... |
| 9506 |
# |
| 9507 |
fneg_sd_may_ovfl: |
| 9508 |
fmov.l &0x0,%fpsr # clear FPSR |
| 9509 |
fmov.l L_SCR3(%a6),%fpcr # set FPCR |
| 9510 |
|
| 9511 |
fneg.x FP_SCR0(%a6),%fp0 # perform negation |
| 9512 |
|
| 9513 |
fmov.l %fpsr,%d1 # save status |
| 9514 |
fmov.l &0x0,%fpcr # clear FPCR |
| 9515 |
|
| 9516 |
or.l %d1,USER_FPSR(%a6) # save INEX2,N |
| 9517 |
|
| 9518 |
fabs.x %fp0,%fp1 # make a copy of result |
| 9519 |
fcmp.b %fp1,&0x2 # is |result| >= 2.b? |
| 9520 |
fbge.w fneg_sd_ovfl_tst # yes; overflow has occurred |
| 9521 |
|
| 9522 |
# no, it didn't overflow; we have correct result |
| 9523 |
bra.w fneg_sd_normal_exit |
| 9524 |
|
| 9525 |
########################################################################## |
| 9526 |
|
| 9527 |
# |
| 9528 |
# input is not normalized; what is it? |
| 9529 |
# |
| 9530 |
fneg_not_norm: |
| 9531 |
cmpi.b %d1,&DENORM # weed out DENORM |
| 9532 |
beq.w fneg_denorm |
| 9533 |
cmpi.b %d1,&SNAN # weed out SNAN |
| 9534 |
beq.l res_snan_1op |
| 9535 |
cmpi.b %d1,&QNAN # weed out QNAN |
| 9536 |
beq.l res_qnan_1op |
| 9537 |
|
| 9538 |
# |
| 9539 |
# do the fneg; at this point, only possible ops are ZERO and INF. |
| 9540 |
# use fneg to determine ccodes. |
| 9541 |
# prec:mode should be zero at this point but it won't affect answer anyways. |
| 9542 |
# |
| 9543 |
fneg.x SRC_EX(%a0),%fp0 # do fneg |
| 9544 |
fmov.l %fpsr,%d0 |
| 9545 |
rol.l &0x8,%d0 # put ccodes in lo byte |
| 9546 |
mov.b %d0,FPSR_CC(%a6) # insert correct ccodes |
| 9547 |
rts |
| 9548 |
|
| 9549 |
######################################################################### |
| 9550 |
# XDEF **************************************************************** # |
| 9551 |
# ftst(): emulates the ftest instruction # |
| 9552 |
# # |
| 9553 |
# XREF **************************************************************** # |
| 9554 |
# res{s,q}nan_1op() - set NAN result for monadic instruction # |
| 9555 |
# # |
| 9556 |
# INPUT *************************************************************** # |
| 9557 |
# a0 = pointer to extended precision source operand # |
| 9558 |
# # |
| 9559 |
# OUTPUT ************************************************************** # |
| 9560 |
# none # |
| 9561 |
# # |
| 9562 |
# ALGORITHM *********************************************************** # |
| 9563 |
# Check the source operand tag (STAG) and set the FPCR according # |
| 9564 |
# to the operand type and sign. # |
| 9565 |
# # |
| 9566 |
######################################################################### |
| 9567 |
|
| 9568 |
global ftst |
| 9569 |
ftst: |
| 9570 |
mov.b STAG(%a6),%d1 |
| 9571 |
bne.b ftst_not_norm # optimize on non-norm input |
| 9572 |
|
| 9573 |
# |
| 9574 |
# Norm: |
| 9575 |
# |
| 9576 |
ftst_norm: |
| 9577 |
tst.b SRC_EX(%a0) # is operand negative? |
| 9578 |
bmi.b ftst_norm_m # yes |
| 9579 |
rts |
| 9580 |
ftst_norm_m: |
| 9581 |
mov.b &neg_bmask,FPSR_CC(%a6) # set 'N' ccode bit |
| 9582 |
rts |
| 9583 |
|
| 9584 |
# |
| 9585 |
# input is not normalized; what is it? |
| 9586 |
# |
| 9587 |
ftst_not_norm: |
| 9588 |
cmpi.b %d1,&ZERO # weed out ZERO |
| 9589 |
beq.b ftst_zero |
| 9590 |
cmpi.b %d1,&INF # weed out INF |
| 9591 |
beq.b ftst_inf |
| 9592 |
cmpi.b %d1,&SNAN # weed out SNAN |
| 9593 |
beq.l res_snan_1op |
| 9594 |
cmpi.b %d1,&QNAN # weed out QNAN |
| 9595 |
beq.l res_qnan_1op |
| 9596 |
|
| 9597 |
# |
| 9598 |
# Denorm: |
| 9599 |
# |
| 9600 |
ftst_denorm: |
| 9601 |
tst.b SRC_EX(%a0) # is operand negative? |
| 9602 |
bmi.b ftst_denorm_m # yes |
| 9603 |
rts |
| 9604 |
ftst_denorm_m: |
| 9605 |
mov.b &neg_bmask,FPSR_CC(%a6) # set 'N' ccode bit |
| 9606 |
rts |
| 9607 |
|
| 9608 |
# |
| 9609 |
# Infinity: |
| 9610 |
# |
| 9611 |
ftst_inf: |
| 9612 |
tst.b SRC_EX(%a0) # is operand negative? |
| 9613 |
bmi.b ftst_inf_m # yes |
| 9614 |
ftst_inf_p: |
| 9615 |
mov.b &inf_bmask,FPSR_CC(%a6) # set 'I' ccode bit |
| 9616 |
rts |
| 9617 |
ftst_inf_m: |
| 9618 |
mov.b &inf_bmask+neg_bmask,FPSR_CC(%a6) # set 'I','N' ccode bits |
| 9619 |
rts |
| 9620 |
|
| 9621 |
# |
| 9622 |
# Zero: |
| 9623 |
# |
| 9624 |
ftst_zero: |
| 9625 |
tst.b SRC_EX(%a0) # is operand negative? |
| 9626 |
bmi.b ftst_zero_m # yes |
| 9627 |
ftst_zero_p: |
| 9628 |
mov.b &z_bmask,FPSR_CC(%a6) # set 'N' ccode bit |
| 9629 |
rts |
| 9630 |
ftst_zero_m: |
| 9631 |
mov.b &z_bmask+neg_bmask,FPSR_CC(%a6) # set 'Z','N' ccode bits |
| 9632 |
rts |
| 9633 |
|
| 9634 |
######################################################################### |
| 9635 |
# XDEF **************************************************************** # |
| 9636 |
# fint(): emulates the fint instruction # |
| 9637 |
# # |
| 9638 |
# XREF **************************************************************** # |
| 9639 |
# res_{s,q}nan_1op() - set NAN result for monadic operation # |
| 9640 |
# # |
| 9641 |
# INPUT *************************************************************** # |
| 9642 |
# a0 = pointer to extended precision source operand # |
| 9643 |
# d0 = round precision/mode # |
| 9644 |
# # |
| 9645 |
# OUTPUT ************************************************************** # |
| 9646 |
# fp0 = result # |
| 9647 |
# # |
| 9648 |
# ALGORITHM *********************************************************** # |
| 9649 |
# Separate according to operand type. Unnorms don't pass through # |
| 9650 |
# here. For norms, load the rounding mode/prec, execute a "fint", then # |
| 9651 |
# store the resulting FPSR bits. # |
| 9652 |
# For denorms, force the j-bit to a one and do the same as for # |
| 9653 |
# norms. Denorms are so low that the answer will either be a zero or a # |
| 9654 |
# one. # |
| 9655 |
# For zeroes/infs/NANs, return the same while setting the FPSR # |
| 9656 |
# as appropriate. # |
| 9657 |
# # |
| 9658 |
######################################################################### |
| 9659 |
|
| 9660 |
global fint |
| 9661 |
fint: |
| 9662 |
mov.b STAG(%a6),%d1 |
| 9663 |
bne.b fint_not_norm # optimize on non-norm input |
| 9664 |
|
| 9665 |
# |
| 9666 |
# Norm: |
| 9667 |
# |
| 9668 |
fint_norm: |
| 9669 |
andi.b &0x30,%d0 # set prec = ext |
| 9670 |
|
| 9671 |
fmov.l %d0,%fpcr # set FPCR |
| 9672 |
fmov.l &0x0,%fpsr # clear FPSR |
| 9673 |
|
| 9674 |
fint.x SRC(%a0),%fp0 # execute fint |
| 9675 |
|
| 9676 |
fmov.l &0x0,%fpcr # clear FPCR |
| 9677 |
fmov.l %fpsr,%d0 # save FPSR |
| 9678 |
or.l %d0,USER_FPSR(%a6) # set exception bits |
| 9679 |
|
| 9680 |
rts |
| 9681 |
|
| 9682 |
# |
| 9683 |
# input is not normalized; what is it? |
| 9684 |
# |
| 9685 |
fint_not_norm: |
| 9686 |
cmpi.b %d1,&ZERO # weed out ZERO |
| 9687 |
beq.b fint_zero |
| 9688 |
cmpi.b %d1,&INF # weed out INF |
| 9689 |
beq.b fint_inf |
| 9690 |
cmpi.b %d1,&DENORM # weed out DENORM |
| 9691 |
beq.b fint_denorm |
| 9692 |
cmpi.b %d1,&SNAN # weed out SNAN |
| 9693 |
beq.l res_snan_1op |
| 9694 |
bra.l res_qnan_1op # weed out QNAN |
| 9695 |
|
| 9696 |
# |
| 9697 |
# Denorm: |
| 9698 |
# |
| 9699 |
# for DENORMs, the result will be either (+/-)ZERO or (+/-)1. |
| 9700 |
# also, the INEX2 and AINEX exception bits will be set. |
| 9701 |
# so, we could either set these manually or force the DENORM |
| 9702 |
# to a very small NORM and ship it to the NORM routine. |
| 9703 |
# I do the latter. |
| 9704 |
# |
| 9705 |
fint_denorm: |
| 9706 |
mov.w SRC_EX(%a0),FP_SCR0_EX(%a6) # copy sign, zero exp |
| 9707 |
mov.b &0x80,FP_SCR0_HI(%a6) # force DENORM ==> small NORM |
| 9708 |
lea FP_SCR0(%a6),%a0 |
| 9709 |
bra.b fint_norm |
| 9710 |
|
| 9711 |
# |
| 9712 |
# Zero: |
| 9713 |
# |
| 9714 |
fint_zero: |
| 9715 |
tst.b SRC_EX(%a0) # is ZERO negative? |
| 9716 |
bmi.b fint_zero_m # yes |
| 9717 |
fint_zero_p: |
| 9718 |
fmov.s &0x00000000,%fp0 # return +ZERO in fp0 |
| 9719 |
mov.b &z_bmask,FPSR_CC(%a6) # set 'Z' ccode bit |
| 9720 |
rts |
| 9721 |
fint_zero_m: |
| 9722 |
fmov.s &0x80000000,%fp0 # return -ZERO in fp0 |
| 9723 |
mov.b &z_bmask+neg_bmask,FPSR_CC(%a6) # set 'Z','N' ccode bits |
| 9724 |
rts |
| 9725 |
|
| 9726 |
# |
| 9727 |
# Infinity: |
| 9728 |
# |
| 9729 |
fint_inf: |
| 9730 |
fmovm.x SRC(%a0),&0x80 # return result in fp0 |
| 9731 |
tst.b SRC_EX(%a0) # is INF negative? |
| 9732 |
bmi.b fint_inf_m # yes |
| 9733 |
fint_inf_p: |
| 9734 |
mov.b &inf_bmask,FPSR_CC(%a6) # set 'I' ccode bit |
| 9735 |
rts |
| 9736 |
fint_inf_m: |
| 9737 |
mov.b &inf_bmask+neg_bmask,FPSR_CC(%a6) # set 'N','I' ccode bits |
| 9738 |
rts |
| 9739 |
|
| 9740 |
######################################################################### |
| 9741 |
# XDEF **************************************************************** # |
| 9742 |
# fintrz(): emulates the fintrz instruction # |
| 9743 |
# # |
| 9744 |
# XREF **************************************************************** # |
| 9745 |
# res_{s,q}nan_1op() - set NAN result for monadic operation # |
| 9746 |
# # |
| 9747 |
# INPUT *************************************************************** # |
| 9748 |
# a0 = pointer to extended precision source operand # |
| 9749 |
# d0 = round precision/mode # |
| 9750 |
# # |
| 9751 |
# OUTPUT ************************************************************** # |
| 9752 |
# fp0 = result # |
| 9753 |
# # |
| 9754 |
# ALGORITHM *********************************************************** # |
| 9755 |
# Separate according to operand type. Unnorms don't pass through # |
| 9756 |
# here. For norms, load the rounding mode/prec, execute a "fintrz", # |
| 9757 |
# then store the resulting FPSR bits. # |
| 9758 |
# For denorms, force the j-bit to a one and do the same as for # |
| 9759 |
# norms. Denorms are so low that the answer will either be a zero or a # |
| 9760 |
# one. # |
| 9761 |
# For zeroes/infs/NANs, return the same while setting the FPSR # |
| 9762 |
# as appropriate. # |
| 9763 |
# # |
| 9764 |
######################################################################### |
| 9765 |
|
| 9766 |
global fintrz |
| 9767 |
fintrz: |
| 9768 |
mov.b STAG(%a6),%d1 |
| 9769 |
bne.b fintrz_not_norm # optimize on non-norm input |
| 9770 |
|
| 9771 |
# |
| 9772 |
# Norm: |
| 9773 |
# |
| 9774 |
fintrz_norm: |
| 9775 |
fmov.l &0x0,%fpsr # clear FPSR |
| 9776 |
|
| 9777 |
fintrz.x SRC(%a0),%fp0 # execute fintrz |
| 9778 |
|
| 9779 |
fmov.l %fpsr,%d0 # save FPSR |
| 9780 |
or.l %d0,USER_FPSR(%a6) # set exception bits |
| 9781 |
|
| 9782 |
rts |
| 9783 |
|
| 9784 |
# |
| 9785 |
# input is not normalized; what is it? |
| 9786 |
# |
| 9787 |
fintrz_not_norm: |
| 9788 |
cmpi.b %d1,&ZERO # weed out ZERO |
| 9789 |
beq.b fintrz_zero |
| 9790 |
cmpi.b %d1,&INF # weed out INF |
| 9791 |
beq.b fintrz_inf |
| 9792 |
cmpi.b %d1,&DENORM # weed out DENORM |
| 9793 |
beq.b fintrz_denorm |
| 9794 |
cmpi.b %d1,&SNAN # weed out SNAN |
| 9795 |
beq.l res_snan_1op |
| 9796 |
bra.l res_qnan_1op # weed out QNAN |
| 9797 |
|
| 9798 |
# |
| 9799 |
# Denorm: |
| 9800 |
# |
| 9801 |
# for DENORMs, the result will be (+/-)ZERO. |
| 9802 |
# also, the INEX2 and AINEX exception bits will be set. |
| 9803 |
# so, we could either set these manually or force the DENORM |
| 9804 |
# to a very small NORM and ship it to the NORM routine. |
| 9805 |
# I do the latter. |
| 9806 |
# |
| 9807 |
fintrz_denorm: |
| 9808 |
mov.w SRC_EX(%a0),FP_SCR0_EX(%a6) # copy sign, zero exp |
| 9809 |
mov.b &0x80,FP_SCR0_HI(%a6) # force DENORM ==> small NORM |
| 9810 |
lea FP_SCR0(%a6),%a0 |
| 9811 |
bra.b fintrz_norm |
| 9812 |
|
| 9813 |
# |
| 9814 |
# Zero: |
| 9815 |
# |
| 9816 |
fintrz_zero: |
| 9817 |
tst.b SRC_EX(%a0) # is ZERO negative? |
| 9818 |
bmi.b fintrz_zero_m # yes |
| 9819 |
fintrz_zero_p: |
| 9820 |
fmov.s &0x00000000,%fp0 # return +ZERO in fp0 |
| 9821 |
mov.b &z_bmask,FPSR_CC(%a6) # set 'Z' ccode bit |
| 9822 |
rts |
| 9823 |
fintrz_zero_m: |
| 9824 |
fmov.s &0x80000000,%fp0 # return -ZERO in fp0 |
| 9825 |
mov.b &z_bmask+neg_bmask,FPSR_CC(%a6) # set 'Z','N' ccode bits |
| 9826 |
rts |
| 9827 |
|
| 9828 |
# |
| 9829 |
# Infinity: |
| 9830 |
# |
| 9831 |
fintrz_inf: |
| 9832 |
fmovm.x SRC(%a0),&0x80 # return result in fp0 |
| 9833 |
tst.b SRC_EX(%a0) # is INF negative? |
| 9834 |
bmi.b fintrz_inf_m # yes |
| 9835 |
fintrz_inf_p: |
| 9836 |
mov.b &inf_bmask,FPSR_CC(%a6) # set 'I' ccode bit |
| 9837 |
rts |
| 9838 |
fintrz_inf_m: |
| 9839 |
mov.b &inf_bmask+neg_bmask,FPSR_CC(%a6) # set 'N','I' ccode bits |
| 9840 |
rts |
| 9841 |
|
| 9842 |
######################################################################### |
| 9843 |
# XDEF **************************************************************** # |
| 9844 |
# fabs(): emulates the fabs instruction # |
| 9845 |
# fsabs(): emulates the fsabs instruction # |
| 9846 |
# fdabs(): emulates the fdabs instruction # |
| 9847 |
# # |
| 9848 |
# XREF **************************************************************** # |
| 9849 |
# norm() - normalize denorm mantissa to provide EXOP # |
| 9850 |
# scale_to_zero_src() - make exponent. = 0; get scale factor # |
| 9851 |
# unf_res() - calculate underflow result # |
| 9852 |
# ovf_res() - calculate overflow result # |
| 9853 |
# res_{s,q}nan_1op() - set NAN result for monadic operation # |
| 9854 |
# # |
| 9855 |
# INPUT *************************************************************** # |
| 9856 |
# a0 = pointer to extended precision source operand # |
| 9857 |
# d0 = rnd precision/mode # |
| 9858 |
# # |
| 9859 |
# OUTPUT ************************************************************** # |
| 9860 |
# fp0 = result # |
| 9861 |
# fp1 = EXOP (if exception occurred) # |
| 9862 |
# # |
| 9863 |
# ALGORITHM *********************************************************** # |
| 9864 |
# Handle NANs, infinities, and zeroes as special cases. Divide # |
| 9865 |
# norms into extended, single, and double precision. # |
| 9866 |
# Simply clear sign for extended precision norm. Ext prec denorm # |
| 9867 |
# gets an EXOP created for it since it's an underflow. # |
| 9868 |
# Double and single precision can overflow and underflow. First, # |
| 9869 |
# scale the operand such that the exponent is zero. Perform an "fabs" # |
| 9870 |
# using the correct rnd mode/prec. Check to see if the original # |
| 9871 |
# exponent would take an exception. If so, use unf_res() or ovf_res() # |
| 9872 |
# to calculate the default result. Also, create the EXOP for the # |
| 9873 |
# exceptional case. If no exception should occur, insert the correct # |
| 9874 |
# result exponent and return. # |
| 9875 |
# Unnorms don't pass through here. # |
| 9876 |
# # |
| 9877 |
######################################################################### |
| 9878 |
|
| 9879 |
global fsabs |
| 9880 |
fsabs: |
| 9881 |
andi.b &0x30,%d0 # clear rnd prec |
| 9882 |
ori.b &s_mode*0x10,%d0 # insert sgl precision |
| 9883 |
bra.b fabs |
| 9884 |
|
| 9885 |
global fdabs |
| 9886 |
fdabs: |
| 9887 |
andi.b &0x30,%d0 # clear rnd prec |
| 9888 |
ori.b &d_mode*0x10,%d0 # insert dbl precision |
| 9889 |
|
| 9890 |
global fabs |
| 9891 |
fabs: |
| 9892 |
mov.l %d0,L_SCR3(%a6) # store rnd info |
| 9893 |
mov.b STAG(%a6),%d1 |
| 9894 |
bne.w fabs_not_norm # optimize on non-norm input |
| 9895 |
|
| 9896 |
# |
| 9897 |
# ABSOLUTE VALUE: norms and denorms ONLY! |
| 9898 |
# |
| 9899 |
fabs_norm: |
| 9900 |
andi.b &0xc0,%d0 # is precision extended? |
| 9901 |
bne.b fabs_not_ext # no; go handle sgl or dbl |
| 9902 |
|
| 9903 |
# |
| 9904 |
# precision selected is extended. so...we can not get an underflow |
| 9905 |
# or overflow because of rounding to the correct precision. so... |
| 9906 |
# skip the scaling and unscaling... |
| 9907 |
# |
| 9908 |
mov.l SRC_HI(%a0),FP_SCR0_HI(%a6) |
| 9909 |
mov.l SRC_LO(%a0),FP_SCR0_LO(%a6) |
| 9910 |
mov.w SRC_EX(%a0),%d1 |
| 9911 |
bclr &15,%d1 # force absolute value |
| 9912 |
mov.w %d1,FP_SCR0_EX(%a6) # insert exponent |
| 9913 |
fmovm.x FP_SCR0(%a6),&0x80 # return result in fp0 |
| 9914 |
rts |
| 9915 |
|
| 9916 |
# |
| 9917 |
# for an extended precision DENORM, the UNFL exception bit is set |
| 9918 |
# the accrued bit is NOT set in this instance(no inexactness!) |
| 9919 |
# |
| 9920 |
fabs_denorm: |
| 9921 |
andi.b &0xc0,%d0 # is precision extended? |
| 9922 |
bne.b fabs_not_ext # no |
| 9923 |
|
| 9924 |
bset &unfl_bit,FPSR_EXCEPT(%a6) # set unfl exc bit |
| 9925 |
|
| 9926 |
mov.l SRC_HI(%a0),FP_SCR0_HI(%a6) |
| 9927 |
mov.l SRC_LO(%a0),FP_SCR0_LO(%a6) |
| 9928 |
mov.w SRC_EX(%a0),%d0 |
| 9929 |
bclr &15,%d0 # clear sign |
| 9930 |
mov.w %d0,FP_SCR0_EX(%a6) # insert exponent |
| 9931 |
|
| 9932 |
fmovm.x FP_SCR0(%a6),&0x80 # return default result in fp0 |
| 9933 |
|
| 9934 |
btst &unfl_bit,FPCR_ENABLE(%a6) # is UNFL enabled? |
| 9935 |
bne.b fabs_ext_unfl_ena |
| 9936 |
rts |
| 9937 |
|
| 9938 |
# |
| 9939 |
# the input is an extended DENORM and underflow is enabled in the FPCR. |
| 9940 |
# normalize the mantissa and add the bias of 0x6000 to the resulting negative |
| 9941 |
# exponent and insert back into the operand. |
| 9942 |
# |
| 9943 |
fabs_ext_unfl_ena: |
| 9944 |
lea FP_SCR0(%a6),%a0 # pass: ptr to operand |
| 9945 |
bsr.l norm # normalize result |
| 9946 |
neg.w %d0 # new exponent = -(shft val) |
| 9947 |
addi.w &0x6000,%d0 # add new bias to exponent |
| 9948 |
mov.w FP_SCR0_EX(%a6),%d1 # fetch old sign,exp |
| 9949 |
andi.w &0x8000,%d1 # keep old sign |
| 9950 |
andi.w &0x7fff,%d0 # clear sign position |
| 9951 |
or.w %d1,%d0 # concat old sign, new exponent |
| 9952 |
mov.w %d0,FP_SCR0_EX(%a6) # insert new exponent |
| 9953 |
fmovm.x FP_SCR0(%a6),&0x40 # return EXOP in fp1 |
| 9954 |
rts |
| 9955 |
|
| 9956 |
# |
| 9957 |
# operand is either single or double |
| 9958 |
# |
| 9959 |
fabs_not_ext: |
| 9960 |
cmpi.b %d0,&s_mode*0x10 # separate sgl/dbl prec |
| 9961 |
bne.b fabs_dbl |
| 9962 |
|
| 9963 |
# |
| 9964 |
# operand is to be rounded to single precision |
| 9965 |
# |
| 9966 |
fabs_sgl: |
| 9967 |
mov.w SRC_EX(%a0),FP_SCR0_EX(%a6) |
| 9968 |
mov.l SRC_HI(%a0),FP_SCR0_HI(%a6) |
| 9969 |
mov.l SRC_LO(%a0),FP_SCR0_LO(%a6) |
| 9970 |
bsr.l scale_to_zero_src # calculate scale factor |
| 9971 |
|
| 9972 |
cmpi.l %d0,&0x3fff-0x3f80 # will move in underflow? |
| 9973 |
bge.w fabs_sd_unfl # yes; go handle underflow |
| 9974 |
cmpi.l %d0,&0x3fff-0x407e # will move in overflow? |
| 9975 |
beq.w fabs_sd_may_ovfl # maybe; go check |
| 9976 |
blt.w fabs_sd_ovfl # yes; go handle overflow |
| 9977 |
|
| 9978 |
# |
| 9979 |
# operand will NOT overflow or underflow when moved in to the fp reg file |
| 9980 |
# |
| 9981 |
fabs_sd_normal: |
| 9982 |
fmov.l &0x0,%fpsr # clear FPSR |
| 9983 |
fmov.l L_SCR3(%a6),%fpcr # set FPCR |
| 9984 |
|
| 9985 |
fabs.x FP_SCR0(%a6),%fp0 # perform absolute |
| 9986 |
|
| 9987 |
fmov.l %fpsr,%d1 # save FPSR |
| 9988 |
fmov.l &0x0,%fpcr # clear FPCR |
| 9989 |
|
| 9990 |
or.l %d1,USER_FPSR(%a6) # save INEX2,N |
| 9991 |
|
| 9992 |
fabs_sd_normal_exit: |
| 9993 |
mov.l %d2,-(%sp) # save d2 |
| 9994 |
fmovm.x &0x80,FP_SCR0(%a6) # store out result |
| 9995 |
mov.w FP_SCR0_EX(%a6),%d1 # load sgn,exp |
| 9996 |
mov.l %d1,%d2 # make a copy |
| 9997 |
andi.l &0x7fff,%d1 # strip sign |
| 9998 |
sub.l %d0,%d1 # add scale factor |
| 9999 |
andi.w &0x8000,%d2 # keep old sign |
| 10000 |
or.w %d1,%d2 # concat old sign,new exp |
| 10001 |
mov.w %d2,FP_SCR0_EX(%a6) # insert new exponent |
| 10002 |
mov.l (%sp)+,%d2 # restore d2 |
| 10003 |
fmovm.x FP_SCR0(%a6),&0x80 # return result in fp0 |
| 10004 |
rts |
| 10005 |
|
| 10006 |
# |
| 10007 |
# operand is to be rounded to double precision |
| 10008 |
# |
| 10009 |
fabs_dbl: |
| 10010 |
mov.w SRC_EX(%a0),FP_SCR0_EX(%a6) |
| 10011 |
mov.l SRC_HI(%a0),FP_SCR0_HI(%a6) |
| 10012 |
mov.l SRC_LO(%a0),FP_SCR0_LO(%a6) |
| 10013 |
bsr.l scale_to_zero_src # calculate scale factor |
| 10014 |
|
| 10015 |
cmpi.l %d0,&0x3fff-0x3c00 # will move in underflow? |
| 10016 |
bge.b fabs_sd_unfl # yes; go handle underflow |
| 10017 |
cmpi.l %d0,&0x3fff-0x43fe # will move in overflow? |
| 10018 |
beq.w fabs_sd_may_ovfl # maybe; go check |
| 10019 |
blt.w fabs_sd_ovfl # yes; go handle overflow |
| 10020 |
bra.w fabs_sd_normal # no; ho handle normalized op |
| 10021 |
|
| 10022 |
# |
| 10023 |
# operand WILL underflow when moved in to the fp register file |
| 10024 |
# |
| 10025 |
fabs_sd_unfl: |
| 10026 |
bset &unfl_bit,FPSR_EXCEPT(%a6) # set unfl exc bit |
| 10027 |
|
| 10028 |
bclr &0x7,FP_SCR0_EX(%a6) # force absolute value |
| 10029 |
|
| 10030 |
# if underflow or inexact is enabled, go calculate EXOP first. |
| 10031 |
mov.b FPCR_ENABLE(%a6),%d1 |
| 10032 |
andi.b &0x0b,%d1 # is UNFL or INEX enabled? |
| 10033 |
bne.b fabs_sd_unfl_ena # yes |
| 10034 |
|
| 10035 |
fabs_sd_unfl_dis: |
| 10036 |
lea FP_SCR0(%a6),%a0 # pass: result addr |
| 10037 |
mov.l L_SCR3(%a6),%d1 # pass: rnd prec,mode |
| 10038 |
bsr.l unf_res # calculate default result |
| 10039 |
or.b %d0,FPSR_CC(%a6) # set possible 'Z' ccode |
| 10040 |
fmovm.x FP_SCR0(%a6),&0x80 # return default result in fp0 |
| 10041 |
rts |
| 10042 |
|
| 10043 |
# |
| 10044 |
# operand will underflow AND underflow is enabled. |
| 10045 |
# Therefore, we must return the result rounded to extended precision. |
| 10046 |
# |
| 10047 |
fabs_sd_unfl_ena: |
| 10048 |
mov.l FP_SCR0_HI(%a6),FP_SCR1_HI(%a6) |
| 10049 |
mov.l FP_SCR0_LO(%a6),FP_SCR1_LO(%a6) |
| 10050 |
mov.w FP_SCR0_EX(%a6),%d1 # load current exponent |
| 10051 |
|
| 10052 |
mov.l %d2,-(%sp) # save d2 |
| 10053 |
mov.l %d1,%d2 # make a copy |
| 10054 |
andi.l &0x7fff,%d1 # strip sign |
| 10055 |
andi.w &0x8000,%d2 # keep old sign |
| 10056 |
sub.l %d0,%d1 # subtract scale factor |
| 10057 |
addi.l &0x6000,%d1 # add new bias |
| 10058 |
andi.w &0x7fff,%d1 |
| 10059 |
or.w %d2,%d1 # concat new sign,new exp |
| 10060 |
mov.w %d1,FP_SCR1_EX(%a6) # insert new exp |
| 10061 |
fmovm.x FP_SCR1(%a6),&0x40 # return EXOP in fp1 |
| 10062 |
mov.l (%sp)+,%d2 # restore d2 |
| 10063 |
bra.b fabs_sd_unfl_dis |
| 10064 |
|
| 10065 |
# |
| 10066 |
# operand WILL overflow. |
| 10067 |
# |
| 10068 |
fabs_sd_ovfl: |
| 10069 |
fmov.l &0x0,%fpsr # clear FPSR |
| 10070 |
fmov.l L_SCR3(%a6),%fpcr # set FPCR |
| 10071 |
|
| 10072 |
fabs.x FP_SCR0(%a6),%fp0 # perform absolute |
| 10073 |
|
| 10074 |
fmov.l &0x0,%fpcr # clear FPCR |
| 10075 |
fmov.l %fpsr,%d1 # save FPSR |
| 10076 |
|
| 10077 |
or.l %d1,USER_FPSR(%a6) # save INEX2,N |
| 10078 |
|
| 10079 |
fabs_sd_ovfl_tst: |
| 10080 |
or.l &ovfl_inx_mask,USER_FPSR(%a6) # set ovfl/aovfl/ainex |
| 10081 |
|
| 10082 |
mov.b FPCR_ENABLE(%a6),%d1 |
| 10083 |
andi.b &0x13,%d1 # is OVFL or INEX enabled? |
| 10084 |
bne.b fabs_sd_ovfl_ena # yes |
| 10085 |
|
| 10086 |
# |
| 10087 |
# OVFL is not enabled; therefore, we must create the default result by |
| 10088 |
# calling ovf_res(). |
| 10089 |
# |
| 10090 |
fabs_sd_ovfl_dis: |
| 10091 |
btst &neg_bit,FPSR_CC(%a6) # is result negative? |
| 10092 |
sne %d1 # set sign param accordingly |
| 10093 |
mov.l L_SCR3(%a6),%d0 # pass: prec,mode |
| 10094 |
bsr.l ovf_res # calculate default result |
| 10095 |
or.b %d0,FPSR_CC(%a6) # set INF,N if applicable |
| 10096 |
fmovm.x (%a0),&0x80 # return default result in fp0 |
| 10097 |
rts |
| 10098 |
|
| 10099 |
# |
| 10100 |
# OVFL is enabled. |
| 10101 |
# the INEX2 bit has already been updated by the round to the correct precision. |
| 10102 |
# now, round to extended(and don't alter the FPSR). |
| 10103 |
# |
| 10104 |
fabs_sd_ovfl_ena: |
| 10105 |
mov.l %d2,-(%sp) # save d2 |
| 10106 |
mov.w FP_SCR0_EX(%a6),%d1 # fetch {sgn,exp} |
| 10107 |
mov.l %d1,%d2 # make a copy |
| 10108 |
andi.l &0x7fff,%d1 # strip sign |
| 10109 |
andi.w &0x8000,%d2 # keep old sign |
| 10110 |
sub.l %d0,%d1 # add scale factor |
| 10111 |
subi.l &0x6000,%d1 # subtract bias |
| 10112 |
andi.w &0x7fff,%d1 |
| 10113 |
or.w %d2,%d1 # concat sign,exp |
| 10114 |
mov.w %d1,FP_SCR0_EX(%a6) # insert new exponent |
| 10115 |
fmovm.x FP_SCR0(%a6),&0x40 # return EXOP in fp1 |
| 10116 |
mov.l (%sp)+,%d2 # restore d2 |
| 10117 |
bra.b fabs_sd_ovfl_dis |
| 10118 |
|
| 10119 |
# |
| 10120 |
# the move in MAY underflow. so... |
| 10121 |
# |
| 10122 |
fabs_sd_may_ovfl: |
| 10123 |
fmov.l &0x0,%fpsr # clear FPSR |
| 10124 |
fmov.l L_SCR3(%a6),%fpcr # set FPCR |
| 10125 |
|
| 10126 |
fabs.x FP_SCR0(%a6),%fp0 # perform absolute |
| 10127 |
|
| 10128 |
fmov.l %fpsr,%d1 # save status |
| 10129 |
fmov.l &0x0,%fpcr # clear FPCR |
| 10130 |
|
| 10131 |
or.l %d1,USER_FPSR(%a6) # save INEX2,N |
| 10132 |
|
| 10133 |
fabs.x %fp0,%fp1 # make a copy of result |
| 10134 |
fcmp.b %fp1,&0x2 # is |result| >= 2.b? |
| 10135 |
fbge.w fabs_sd_ovfl_tst # yes; overflow has occurred |
| 10136 |
|
| 10137 |
# no, it didn't overflow; we have correct result |
| 10138 |
bra.w fabs_sd_normal_exit |
| 10139 |
|
| 10140 |
########################################################################## |
| 10141 |
|
| 10142 |
# |
| 10143 |
# input is not normalized; what is it? |
| 10144 |
# |
| 10145 |
fabs_not_norm: |
| 10146 |
cmpi.b %d1,&DENORM # weed out DENORM |
| 10147 |
beq.w fabs_denorm |
| 10148 |
cmpi.b %d1,&SNAN # weed out SNAN |
| 10149 |
beq.l res_snan_1op |
| 10150 |
cmpi.b %d1,&QNAN # weed out QNAN |
| 10151 |
beq.l res_qnan_1op |
| 10152 |
|
| 10153 |
fabs.x SRC(%a0),%fp0 # force absolute value |
| 10154 |
|
| 10155 |
cmpi.b %d1,&INF # weed out INF |
| 10156 |
beq.b fabs_inf |
| 10157 |
fabs_zero: |
| 10158 |
mov.b &z_bmask,FPSR_CC(%a6) # set 'Z' ccode bit |
| 10159 |
rts |
| 10160 |
fabs_inf: |
| 10161 |
mov.b &inf_bmask,FPSR_CC(%a6) # set 'I' ccode bit |
| 10162 |
rts |
| 10163 |
|
| 10164 |
######################################################################### |
| 10165 |
# XDEF **************************************************************** # |
| 10166 |
# fcmp(): fp compare op routine # |
| 10167 |
# # |
| 10168 |
# XREF **************************************************************** # |
| 10169 |
# res_qnan() - return QNAN result # |
| 10170 |
# res_snan() - return SNAN result # |
| 10171 |
# # |
| 10172 |
# INPUT *************************************************************** # |
| 10173 |
# a0 = pointer to extended precision source operand # |
| 10174 |
# a1 = pointer to extended precision destination operand # |
| 10175 |
# d0 = round prec/mode # |
| 10176 |
# # |
| 10177 |
# OUTPUT ************************************************************** # |
| 10178 |
# None # |
| 10179 |
# # |
| 10180 |
# ALGORITHM *********************************************************** # |
| 10181 |
# Handle NANs and denorms as special cases. For everything else, # |
| 10182 |
# just use the actual fcmp instruction to produce the correct condition # |
| 10183 |
# codes. # |
| 10184 |
# # |
| 10185 |
######################################################################### |
| 10186 |
|
| 10187 |
global fcmp |
| 10188 |
fcmp: |
| 10189 |
clr.w %d1 |
| 10190 |
mov.b DTAG(%a6),%d1 |
| 10191 |
lsl.b &0x3,%d1 |
| 10192 |
or.b STAG(%a6),%d1 |
| 10193 |
bne.b fcmp_not_norm # optimize on non-norm input |
| 10194 |
|
| 10195 |
# |
| 10196 |
# COMPARE FP OPs : NORMs, ZEROs, INFs, and "corrected" DENORMs |
| 10197 |
# |
| 10198 |
fcmp_norm: |
| 10199 |
fmovm.x DST(%a1),&0x80 # load dst op |
| 10200 |
|
| 10201 |
fcmp.x %fp0,SRC(%a0) # do compare |
| 10202 |
|
| 10203 |
fmov.l %fpsr,%d0 # save FPSR |
| 10204 |
rol.l &0x8,%d0 # extract ccode bits |
| 10205 |
mov.b %d0,FPSR_CC(%a6) # set ccode bits(no exc bits are set) |
| 10206 |
|
| 10207 |
rts |
| 10208 |
|
| 10209 |
# |
| 10210 |
# fcmp: inputs are not both normalized; what are they? |
| 10211 |
# |
| 10212 |
fcmp_not_norm: |
| 10213 |
mov.w (tbl_fcmp_op.b,%pc,%d1.w*2),%d1 |
| 10214 |
jmp (tbl_fcmp_op.b,%pc,%d1.w*1) |
| 10215 |
|
| 10216 |
swbeg &48 |
| 10217 |
tbl_fcmp_op: |
| 10218 |
short fcmp_norm - tbl_fcmp_op # NORM - NORM |
| 10219 |
short fcmp_norm - tbl_fcmp_op # NORM - ZERO |
| 10220 |
short fcmp_norm - tbl_fcmp_op # NORM - INF |
| 10221 |
short fcmp_res_qnan - tbl_fcmp_op # NORM - QNAN |
| 10222 |
short fcmp_nrm_dnrm - tbl_fcmp_op # NORM - DENORM |
| 10223 |
short fcmp_res_snan - tbl_fcmp_op # NORM - SNAN |
| 10224 |
short tbl_fcmp_op - tbl_fcmp_op # |
| 10225 |
short tbl_fcmp_op - tbl_fcmp_op # |
| 10226 |
|
| 10227 |
short fcmp_norm - tbl_fcmp_op # ZERO - NORM |
| 10228 |
short fcmp_norm - tbl_fcmp_op # ZERO - ZERO |
| 10229 |
short fcmp_norm - tbl_fcmp_op # ZERO - INF |
| 10230 |
short fcmp_res_qnan - tbl_fcmp_op # ZERO - QNAN |
| 10231 |
short fcmp_dnrm_s - tbl_fcmp_op # ZERO - DENORM |
| 10232 |
short fcmp_res_snan - tbl_fcmp_op # ZERO - SNAN |
| 10233 |
short tbl_fcmp_op - tbl_fcmp_op # |
| 10234 |
short tbl_fcmp_op - tbl_fcmp_op # |
| 10235 |
|
| 10236 |
short fcmp_norm - tbl_fcmp_op # INF - NORM |
| 10237 |
short fcmp_norm - tbl_fcmp_op # INF - ZERO |
| 10238 |
short fcmp_norm - tbl_fcmp_op # INF - INF |
| 10239 |
short fcmp_res_qnan - tbl_fcmp_op # INF - QNAN |
| 10240 |
short fcmp_dnrm_s - tbl_fcmp_op # INF - DENORM |
| 10241 |
short fcmp_res_snan - tbl_fcmp_op # INF - SNAN |
| 10242 |
short tbl_fcmp_op - tbl_fcmp_op # |
| 10243 |
short tbl_fcmp_op - tbl_fcmp_op # |
| 10244 |
|
| 10245 |
short fcmp_res_qnan - tbl_fcmp_op # QNAN - NORM |
| 10246 |
short fcmp_res_qnan - tbl_fcmp_op # QNAN - ZERO |
| 10247 |
short fcmp_res_qnan - tbl_fcmp_op # QNAN - INF |
| 10248 |
short fcmp_res_qnan - tbl_fcmp_op # QNAN - QNAN |
| 10249 |
short fcmp_res_qnan - tbl_fcmp_op # QNAN - DENORM |
| 10250 |
short fcmp_res_snan - tbl_fcmp_op # QNAN - SNAN |
| 10251 |
short tbl_fcmp_op - tbl_fcmp_op # |
| 10252 |
short tbl_fcmp_op - tbl_fcmp_op # |
| 10253 |
|
| 10254 |
short fcmp_dnrm_nrm - tbl_fcmp_op # DENORM - NORM |
| 10255 |
short fcmp_dnrm_d - tbl_fcmp_op # DENORM - ZERO |
| 10256 |
short fcmp_dnrm_d - tbl_fcmp_op # DENORM - INF |
| 10257 |
short fcmp_res_qnan - tbl_fcmp_op # DENORM - QNAN |
| 10258 |
short fcmp_dnrm_sd - tbl_fcmp_op # DENORM - DENORM |
| 10259 |
short fcmp_res_snan - tbl_fcmp_op # DENORM - SNAN |
| 10260 |
short tbl_fcmp_op - tbl_fcmp_op # |
| 10261 |
short tbl_fcmp_op - tbl_fcmp_op # |
| 10262 |
|
| 10263 |
short fcmp_res_snan - tbl_fcmp_op # SNAN - NORM |
| 10264 |
short fcmp_res_snan - tbl_fcmp_op # SNAN - ZERO |
| 10265 |
short fcmp_res_snan - tbl_fcmp_op # SNAN - INF |
| 10266 |
short fcmp_res_snan - tbl_fcmp_op # SNAN - QNAN |
| 10267 |
short fcmp_res_snan - tbl_fcmp_op # SNAN - DENORM |
| 10268 |
short fcmp_res_snan - tbl_fcmp_op # SNAN - SNAN |
| 10269 |
short tbl_fcmp_op - tbl_fcmp_op # |
| 10270 |
short tbl_fcmp_op - tbl_fcmp_op # |
| 10271 |
|
| 10272 |
# unlike all other functions for QNAN and SNAN, fcmp does NOT set the |
| 10273 |
# 'N' bit for a negative QNAN or SNAN input so we must squelch it here. |
| 10274 |
fcmp_res_qnan: |
| 10275 |
bsr.l res_qnan |
| 10276 |
andi.b &0xf7,FPSR_CC(%a6) |
| 10277 |
rts |
| 10278 |
fcmp_res_snan: |
| 10279 |
bsr.l res_snan |
| 10280 |
andi.b &0xf7,FPSR_CC(%a6) |
| 10281 |
rts |
| 10282 |
|
| 10283 |
# |
| 10284 |
# DENORMs are a little more difficult. |
| 10285 |
# If you have a 2 DENORMs, then you can just force the j-bit to a one |
| 10286 |
# and use the fcmp_norm routine. |
| 10287 |
# If you have a DENORM and an INF or ZERO, just force the DENORM's j-bit to a one |
| 10288 |
# and use the fcmp_norm routine. |
| 10289 |
# If you have a DENORM and a NORM with opposite signs, then use fcmp_norm, also. |
| 10290 |
# But with a DENORM and a NORM of the same sign, the neg bit is set if the |
| 10291 |
# (1) signs are (+) and the DENORM is the dst or |
| 10292 |
# (2) signs are (-) and the DENORM is the src |
| 10293 |
# |
| 10294 |
|
| 10295 |
fcmp_dnrm_s: |
| 10296 |
mov.w SRC_EX(%a0),FP_SCR0_EX(%a6) |
| 10297 |
mov.l SRC_HI(%a0),%d0 |
| 10298 |
bset &31,%d0 # DENORM src; make into small norm |
| 10299 |
mov.l %d0,FP_SCR0_HI(%a6) |
| 10300 |
mov.l SRC_LO(%a0),FP_SCR0_LO(%a6) |
| 10301 |
lea FP_SCR0(%a6),%a0 |
| 10302 |
bra.w fcmp_norm |
| 10303 |
|
| 10304 |
fcmp_dnrm_d: |
| 10305 |
mov.l DST_EX(%a1),FP_SCR0_EX(%a6) |
| 10306 |
mov.l DST_HI(%a1),%d0 |
| 10307 |
bset &31,%d0 # DENORM src; make into small norm |
| 10308 |
mov.l %d0,FP_SCR0_HI(%a6) |
| 10309 |
mov.l DST_LO(%a1),FP_SCR0_LO(%a6) |
| 10310 |
lea FP_SCR0(%a6),%a1 |
| 10311 |
bra.w fcmp_norm |
| 10312 |
|
| 10313 |
fcmp_dnrm_sd: |
| 10314 |
mov.w DST_EX(%a1),FP_SCR1_EX(%a6) |
| 10315 |
mov.w SRC_EX(%a0),FP_SCR0_EX(%a6) |
| 10316 |
mov.l DST_HI(%a1),%d0 |
| 10317 |
bset &31,%d0 # DENORM dst; make into small norm |
| 10318 |
mov.l %d0,FP_SCR1_HI(%a6) |
| 10319 |
mov.l SRC_HI(%a0),%d0 |
| 10320 |
bset &31,%d0 # DENORM dst; make into small norm |
| 10321 |
mov.l %d0,FP_SCR0_HI(%a6) |
| 10322 |
mov.l DST_LO(%a1),FP_SCR1_LO(%a6) |
| 10323 |
mov.l SRC_LO(%a0),FP_SCR0_LO(%a6) |
| 10324 |
lea FP_SCR1(%a6),%a1 |
| 10325 |
lea FP_SCR0(%a6),%a0 |
| 10326 |
bra.w fcmp_norm |
| 10327 |
|
| 10328 |
fcmp_nrm_dnrm: |
| 10329 |
mov.b SRC_EX(%a0),%d0 # determine if like signs |
| 10330 |
mov.b DST_EX(%a1),%d1 |
| 10331 |
eor.b %d0,%d1 |
| 10332 |
bmi.w fcmp_dnrm_s |
| 10333 |
|
| 10334 |
# signs are the same, so must determine the answer ourselves. |
| 10335 |
tst.b %d0 # is src op negative? |
| 10336 |
bmi.b fcmp_nrm_dnrm_m # yes |
| 10337 |
rts |
| 10338 |
fcmp_nrm_dnrm_m: |
| 10339 |
mov.b &neg_bmask,FPSR_CC(%a6) # set 'Z' ccode bit |
| 10340 |
rts |
| 10341 |
|
| 10342 |
fcmp_dnrm_nrm: |
| 10343 |
mov.b SRC_EX(%a0),%d0 # determine if like signs |
| 10344 |
mov.b DST_EX(%a1),%d1 |
| 10345 |
eor.b %d0,%d1 |
| 10346 |
bmi.w fcmp_dnrm_d |
| 10347 |
|
| 10348 |
# signs are the same, so must determine the answer ourselves. |
| 10349 |
tst.b %d0 # is src op negative? |
| 10350 |
bpl.b fcmp_dnrm_nrm_m # no |
| 10351 |
rts |
| 10352 |
fcmp_dnrm_nrm_m: |
| 10353 |
mov.b &neg_bmask,FPSR_CC(%a6) # set 'Z' ccode bit |
| 10354 |
rts |
| 10355 |
|
| 10356 |
######################################################################### |
| 10357 |
# XDEF **************************************************************** # |
| 10358 |
# fsglmul(): emulates the fsglmul instruction # |
| 10359 |
# # |
| 10360 |
# XREF **************************************************************** # |
| 10361 |
# scale_to_zero_src() - scale src exponent to zero # |
| 10362 |
# scale_to_zero_dst() - scale dst exponent to zero # |
| 10363 |
# unf_res4() - return default underflow result for sglop # |
| 10364 |
# ovf_res() - return default overflow result # |
| 10365 |
# res_qnan() - return QNAN result # |
| 10366 |
# res_snan() - return SNAN result # |
| 10367 |
# # |
| 10368 |
# INPUT *************************************************************** # |
| 10369 |
# a0 = pointer to extended precision source operand # |
| 10370 |
# a1 = pointer to extended precision destination operand # |
| 10371 |
# d0 rnd prec,mode # |
| 10372 |
# # |
| 10373 |
# OUTPUT ************************************************************** # |
| 10374 |
# fp0 = result # |
| 10375 |
# fp1 = EXOP (if exception occurred) # |
| 10376 |
# # |
| 10377 |
# ALGORITHM *********************************************************** # |
| 10378 |
# Handle NANs, infinities, and zeroes as special cases. Divide # |
| 10379 |
# norms/denorms into ext/sgl/dbl precision. # |
| 10380 |
# For norms/denorms, scale the exponents such that a multiply # |
| 10381 |
# instruction won't cause an exception. Use the regular fsglmul to # |
| 10382 |
# compute a result. Check if the regular operands would have taken # |
| 10383 |
# an exception. If so, return the default overflow/underflow result # |
| 10384 |
# and return the EXOP if exceptions are enabled. Else, scale the # |
| 10385 |
# result operand to the proper exponent. # |
| 10386 |
# # |
| 10387 |
######################################################################### |
| 10388 |
|
| 10389 |
global fsglmul |
| 10390 |
fsglmul: |
| 10391 |
mov.l %d0,L_SCR3(%a6) # store rnd info |
| 10392 |
|
| 10393 |
clr.w %d1 |
| 10394 |
mov.b DTAG(%a6),%d1 |
| 10395 |
lsl.b &0x3,%d1 |
| 10396 |
or.b STAG(%a6),%d1 |
| 10397 |
|
| 10398 |
bne.w fsglmul_not_norm # optimize on non-norm input |
| 10399 |
|
| 10400 |
fsglmul_norm: |
| 10401 |
mov.w DST_EX(%a1),FP_SCR1_EX(%a6) |
| 10402 |
mov.l DST_HI(%a1),FP_SCR1_HI(%a6) |
| 10403 |
mov.l DST_LO(%a1),FP_SCR1_LO(%a6) |
| 10404 |
|
| 10405 |
mov.w SRC_EX(%a0),FP_SCR0_EX(%a6) |
| 10406 |
mov.l SRC_HI(%a0),FP_SCR0_HI(%a6) |
| 10407 |
mov.l SRC_LO(%a0),FP_SCR0_LO(%a6) |
| 10408 |
|
| 10409 |
bsr.l scale_to_zero_src # scale exponent |
| 10410 |
mov.l %d0,-(%sp) # save scale factor 1 |
| 10411 |
|
| 10412 |
bsr.l scale_to_zero_dst # scale dst exponent |
| 10413 |
|
| 10414 |
add.l (%sp)+,%d0 # SCALE_FACTOR = scale1 + scale2 |
| 10415 |
|
| 10416 |
cmpi.l %d0,&0x3fff-0x7ffe # would result ovfl? |
| 10417 |
beq.w fsglmul_may_ovfl # result may rnd to overflow |
| 10418 |
blt.w fsglmul_ovfl # result will overflow |
| 10419 |
|
| 10420 |
cmpi.l %d0,&0x3fff+0x0001 # would result unfl? |
| 10421 |
beq.w fsglmul_may_unfl # result may rnd to no unfl |
| 10422 |
bgt.w fsglmul_unfl # result will underflow |
| 10423 |
|
| 10424 |
fsglmul_normal: |
| 10425 |
fmovm.x FP_SCR1(%a6),&0x80 # load dst op |
| 10426 |
|
| 10427 |
fmov.l L_SCR3(%a6),%fpcr # set FPCR |
| 10428 |
fmov.l &0x0,%fpsr # clear FPSR |
| 10429 |
|
| 10430 |
fsglmul.x FP_SCR0(%a6),%fp0 # execute sgl multiply |
| 10431 |
|
| 10432 |
fmov.l %fpsr,%d1 # save status |
| 10433 |
fmov.l &0x0,%fpcr # clear FPCR |
| 10434 |
|
| 10435 |
or.l %d1,USER_FPSR(%a6) # save INEX2,N |
| 10436 |
|
| 10437 |
fsglmul_normal_exit: |
| 10438 |
fmovm.x &0x80,FP_SCR0(%a6) # store out result |
| 10439 |
mov.l %d2,-(%sp) # save d2 |
| 10440 |
mov.w FP_SCR0_EX(%a6),%d1 # load {sgn,exp} |
| 10441 |
mov.l %d1,%d2 # make a copy |
| 10442 |
andi.l &0x7fff,%d1 # strip sign |
| 10443 |
andi.w &0x8000,%d2 # keep old sign |
| 10444 |
sub.l %d0,%d1 # add scale factor |
| 10445 |
or.w %d2,%d1 # concat old sign,new exp |
| 10446 |
mov.w %d1,FP_SCR0_EX(%a6) # insert new exponent |
| 10447 |
mov.l (%sp)+,%d2 # restore d2 |
| 10448 |
fmovm.x FP_SCR0(%a6),&0x80 # return result in fp0 |
| 10449 |
rts |
| 10450 |
|
| 10451 |
fsglmul_ovfl: |
| 10452 |
fmovm.x FP_SCR1(%a6),&0x80 # load dst op |
| 10453 |
|
| 10454 |
fmov.l L_SCR3(%a6),%fpcr # set FPCR |
| 10455 |
fmov.l &0x0,%fpsr # clear FPSR |
| 10456 |
|
| 10457 |
fsglmul.x FP_SCR0(%a6),%fp0 # execute sgl multiply |
| 10458 |
|
| 10459 |
fmov.l %fpsr,%d1 # save status |
| 10460 |
fmov.l &0x0,%fpcr # clear FPCR |
| 10461 |
|
| 10462 |
or.l %d1,USER_FPSR(%a6) # save INEX2,N |
| 10463 |
|
| 10464 |
fsglmul_ovfl_tst: |
| 10465 |
|
| 10466 |
# save setting this until now because this is where fsglmul_may_ovfl may jump in |
| 10467 |
or.l &ovfl_inx_mask, USER_FPSR(%a6) # set ovfl/aovfl/ainex |
| 10468 |
|
| 10469 |
mov.b FPCR_ENABLE(%a6),%d1 |
| 10470 |
andi.b &0x13,%d1 # is OVFL or INEX enabled? |
| 10471 |
bne.b fsglmul_ovfl_ena # yes |
| 10472 |
|
| 10473 |
fsglmul_ovfl_dis: |
| 10474 |
btst &neg_bit,FPSR_CC(%a6) # is result negative? |
| 10475 |
sne %d1 # set sign param accordingly |
| 10476 |
mov.l L_SCR3(%a6),%d0 # pass prec:rnd |
| 10477 |
andi.b &0x30,%d0 # force prec = ext |
| 10478 |
bsr.l ovf_res # calculate default result |
| 10479 |
or.b %d0,FPSR_CC(%a6) # set INF,N if applicable |
| 10480 |
fmovm.x (%a0),&0x80 # return default result in fp0 |
| 10481 |
rts |
| 10482 |
|
| 10483 |
fsglmul_ovfl_ena: |
| 10484 |
fmovm.x &0x80,FP_SCR0(%a6) # move result to stack |
| 10485 |
|
| 10486 |
mov.l %d2,-(%sp) # save d2 |
| 10487 |
mov.w FP_SCR0_EX(%a6),%d1 # fetch {sgn,exp} |
| 10488 |
mov.l %d1,%d2 # make a copy |
| 10489 |
andi.l &0x7fff,%d1 # strip sign |
| 10490 |
sub.l %d0,%d1 # add scale factor |
| 10491 |
subi.l &0x6000,%d1 # subtract bias |
| 10492 |
andi.w &0x7fff,%d1 |
| 10493 |
andi.w &0x8000,%d2 # keep old sign |
| 10494 |
or.w %d2,%d1 # concat old sign,new exp |
| 10495 |
mov.w %d1,FP_SCR0_EX(%a6) # insert new exponent |
| 10496 |
mov.l (%sp)+,%d2 # restore d2 |
| 10497 |
fmovm.x FP_SCR0(%a6),&0x40 # return EXOP in fp1 |
| 10498 |
bra.b fsglmul_ovfl_dis |
| 10499 |
|
| 10500 |
fsglmul_may_ovfl: |
| 10501 |
fmovm.x FP_SCR1(%a6),&0x80 # load dst op |
| 10502 |
|
| 10503 |
fmov.l L_SCR3(%a6),%fpcr # set FPCR |
| 10504 |
fmov.l &0x0,%fpsr # clear FPSR |
| 10505 |
|
| 10506 |
fsglmul.x FP_SCR0(%a6),%fp0 # execute sgl multiply |
| 10507 |
|
| 10508 |
fmov.l %fpsr,%d1 # save status |
| 10509 |
fmov.l &0x0,%fpcr # clear FPCR |
| 10510 |
|
| 10511 |
or.l %d1,USER_FPSR(%a6) # save INEX2,N |
| 10512 |
|
| 10513 |
fabs.x %fp0,%fp1 # make a copy of result |
| 10514 |
fcmp.b %fp1,&0x2 # is |result| >= 2.b? |
| 10515 |
fbge.w fsglmul_ovfl_tst # yes; overflow has occurred |
| 10516 |
|
| 10517 |
# no, it didn't overflow; we have correct result |
| 10518 |
bra.w fsglmul_normal_exit |
| 10519 |
|
| 10520 |
fsglmul_unfl: |
| 10521 |
bset &unfl_bit,FPSR_EXCEPT(%a6) # set unfl exc bit |
| 10522 |
|
| 10523 |
fmovm.x FP_SCR1(%a6),&0x80 # load dst op |
| 10524 |
|
| 10525 |
fmov.l &rz_mode*0x10,%fpcr # set FPCR |
| 10526 |
fmov.l &0x0,%fpsr # clear FPSR |
| 10527 |
|
| 10528 |
fsglmul.x FP_SCR0(%a6),%fp0 # execute sgl multiply |
| 10529 |
|
| 10530 |
fmov.l %fpsr,%d1 # save status |
| 10531 |
fmov.l &0x0,%fpcr # clear FPCR |
| 10532 |
|
| 10533 |
or.l %d1,USER_FPSR(%a6) # save INEX2,N |
| 10534 |
|
| 10535 |
mov.b FPCR_ENABLE(%a6),%d1 |
| 10536 |
andi.b &0x0b,%d1 # is UNFL or INEX enabled? |
| 10537 |
bne.b fsglmul_unfl_ena # yes |
| 10538 |
|
| 10539 |
fsglmul_unfl_dis: |
| 10540 |
fmovm.x &0x80,FP_SCR0(%a6) # store out result |
| 10541 |
|
| 10542 |
lea FP_SCR0(%a6),%a0 # pass: result addr |
| 10543 |
mov.l L_SCR3(%a6),%d1 # pass: rnd prec,mode |
| 10544 |
bsr.l unf_res4 # calculate default result |
| 10545 |
or.b %d0,FPSR_CC(%a6) # 'Z' bit may have been set |
| 10546 |
fmovm.x FP_SCR0(%a6),&0x80 # return default result in fp0 |
| 10547 |
rts |
| 10548 |
|
| 10549 |
# |
| 10550 |
# UNFL is enabled. |
| 10551 |
# |
| 10552 |
fsglmul_unfl_ena: |
| 10553 |
fmovm.x FP_SCR1(%a6),&0x40 # load dst op |
| 10554 |
|
| 10555 |
fmov.l L_SCR3(%a6),%fpcr # set FPCR |
| 10556 |
fmov.l &0x0,%fpsr # clear FPSR |
| 10557 |
|
| 10558 |
fsglmul.x FP_SCR0(%a6),%fp1 # execute sgl multiply |
| 10559 |
|
| 10560 |
fmov.l &0x0,%fpcr # clear FPCR |
| 10561 |
|
| 10562 |
fmovm.x &0x40,FP_SCR0(%a6) # save result to stack |
| 10563 |
mov.l %d2,-(%sp) # save d2 |
| 10564 |
mov.w FP_SCR0_EX(%a6),%d1 # fetch {sgn,exp} |
| 10565 |
mov.l %d1,%d2 # make a copy |
| 10566 |
andi.l &0x7fff,%d1 # strip sign |
| 10567 |
andi.w &0x8000,%d2 # keep old sign |
| 10568 |
sub.l %d0,%d1 # add scale factor |
| 10569 |
addi.l &0x6000,%d1 # add bias |
| 10570 |
andi.w &0x7fff,%d1 |
| 10571 |
or.w %d2,%d1 # concat old sign,new exp |
| 10572 |
mov.w %d1,FP_SCR0_EX(%a6) # insert new exponent |
| 10573 |
mov.l (%sp)+,%d2 # restore d2 |
| 10574 |
fmovm.x FP_SCR0(%a6),&0x40 # return EXOP in fp1 |
| 10575 |
bra.w fsglmul_unfl_dis |
| 10576 |
|
| 10577 |
fsglmul_may_unfl: |
| 10578 |
fmovm.x FP_SCR1(%a6),&0x80 # load dst op |
| 10579 |
|
| 10580 |
fmov.l L_SCR3(%a6),%fpcr # set FPCR |
| 10581 |
fmov.l &0x0,%fpsr # clear FPSR |
| 10582 |
|
| 10583 |
fsglmul.x FP_SCR0(%a6),%fp0 # execute sgl multiply |
| 10584 |
|
| 10585 |
fmov.l %fpsr,%d1 # save status |
| 10586 |
fmov.l &0x0,%fpcr # clear FPCR |
| 10587 |
|
| 10588 |
or.l %d1,USER_FPSR(%a6) # save INEX2,N |
| 10589 |
|
| 10590 |
fabs.x %fp0,%fp1 # make a copy of result |
| 10591 |
fcmp.b %fp1,&0x2 # is |result| > 2.b? |
| 10592 |
fbgt.w fsglmul_normal_exit # no; no underflow occurred |
| 10593 |
fblt.w fsglmul_unfl # yes; underflow occurred |
| 10594 |
|
| 10595 |
# |
| 10596 |
# we still don't know if underflow occurred. result is ~ equal to 2. but, |
| 10597 |
# we don't know if the result was an underflow that rounded up to a 2 or |
| 10598 |
# a normalized number that rounded down to a 2. so, redo the entire operation |
| 10599 |
# using RZ as the rounding mode to see what the pre-rounded result is. |
| 10600 |
# this case should be relatively rare. |
| 10601 |
# |
| 10602 |
fmovm.x FP_SCR1(%a6),&0x40 # load dst op into fp1 |
| 10603 |
|
| 10604 |
mov.l L_SCR3(%a6),%d1 |
| 10605 |
andi.b &0xc0,%d1 # keep rnd prec |
| 10606 |
ori.b &rz_mode*0x10,%d1 # insert RZ |
| 10607 |
|
| 10608 |
fmov.l %d1,%fpcr # set FPCR |
| 10609 |
fmov.l &0x0,%fpsr # clear FPSR |
| 10610 |
|
| 10611 |
fsglmul.x FP_SCR0(%a6),%fp1 # execute sgl multiply |
| 10612 |
|
| 10613 |
fmov.l &0x0,%fpcr # clear FPCR |
| 10614 |
fabs.x %fp1 # make absolute value |
| 10615 |
fcmp.b %fp1,&0x2 # is |result| < 2.b? |
| 10616 |
fbge.w fsglmul_normal_exit # no; no underflow occurred |
| 10617 |
bra.w fsglmul_unfl # yes, underflow occurred |
| 10618 |
|
| 10619 |
############################################################################## |
| 10620 |
|
| 10621 |
# |
| 10622 |
# Single Precision Multiply: inputs are not both normalized; what are they? |
| 10623 |
# |
| 10624 |
fsglmul_not_norm: |
| 10625 |
mov.w (tbl_fsglmul_op.b,%pc,%d1.w*2),%d1 |
| 10626 |
jmp (tbl_fsglmul_op.b,%pc,%d1.w*1) |
| 10627 |
|
| 10628 |
swbeg &48 |
| 10629 |
tbl_fsglmul_op: |
| 10630 |
short fsglmul_norm - tbl_fsglmul_op # NORM x NORM |
| 10631 |
short fsglmul_zero - tbl_fsglmul_op # NORM x ZERO |
| 10632 |
short fsglmul_inf_src - tbl_fsglmul_op # NORM x INF |
| 10633 |
short fsglmul_res_qnan - tbl_fsglmul_op # NORM x QNAN |
| 10634 |
short fsglmul_norm - tbl_fsglmul_op # NORM x DENORM |
| 10635 |
short fsglmul_res_snan - tbl_fsglmul_op # NORM x SNAN |
| 10636 |
short tbl_fsglmul_op - tbl_fsglmul_op # |
| 10637 |
short tbl_fsglmul_op - tbl_fsglmul_op # |
| 10638 |
|
| 10639 |
short fsglmul_zero - tbl_fsglmul_op # ZERO x NORM |
| 10640 |
short fsglmul_zero - tbl_fsglmul_op # ZERO x ZERO |
| 10641 |
short fsglmul_res_operr - tbl_fsglmul_op # ZERO x INF |
| 10642 |
short fsglmul_res_qnan - tbl_fsglmul_op # ZERO x QNAN |
| 10643 |
short fsglmul_zero - tbl_fsglmul_op # ZERO x DENORM |
| 10644 |
short fsglmul_res_snan - tbl_fsglmul_op # ZERO x SNAN |
| 10645 |
short tbl_fsglmul_op - tbl_fsglmul_op # |
| 10646 |
short tbl_fsglmul_op - tbl_fsglmul_op # |
| 10647 |
|
| 10648 |
short fsglmul_inf_dst - tbl_fsglmul_op # INF x NORM |
| 10649 |
short fsglmul_res_operr - tbl_fsglmul_op # INF x ZERO |
| 10650 |
short fsglmul_inf_dst - tbl_fsglmul_op # INF x INF |
| 10651 |
short fsglmul_res_qnan - tbl_fsglmul_op # INF x QNAN |
| 10652 |
short fsglmul_inf_dst - tbl_fsglmul_op # INF x DENORM |
| 10653 |
short fsglmul_res_snan - tbl_fsglmul_op # INF x SNAN |
| 10654 |
short tbl_fsglmul_op - tbl_fsglmul_op # |
| 10655 |
short tbl_fsglmul_op - tbl_fsglmul_op # |
| 10656 |
|
| 10657 |
short fsglmul_res_qnan - tbl_fsglmul_op # QNAN x NORM |
| 10658 |
short fsglmul_res_qnan - tbl_fsglmul_op # QNAN x ZERO |
| 10659 |
short fsglmul_res_qnan - tbl_fsglmul_op # QNAN x INF |
| 10660 |
short fsglmul_res_qnan - tbl_fsglmul_op # QNAN x QNAN |
| 10661 |
short fsglmul_res_qnan - tbl_fsglmul_op # QNAN x DENORM |
| 10662 |
short fsglmul_res_snan - tbl_fsglmul_op # QNAN x SNAN |
| 10663 |
short tbl_fsglmul_op - tbl_fsglmul_op # |
| 10664 |
short tbl_fsglmul_op - tbl_fsglmul_op # |
| 10665 |
|
| 10666 |
short fsglmul_norm - tbl_fsglmul_op # NORM x NORM |
| 10667 |
short fsglmul_zero - tbl_fsglmul_op # NORM x ZERO |
| 10668 |
short fsglmul_inf_src - tbl_fsglmul_op # NORM x INF |
| 10669 |
short fsglmul_res_qnan - tbl_fsglmul_op # NORM x QNAN |
| 10670 |
short fsglmul_norm - tbl_fsglmul_op # NORM x DENORM |
| 10671 |
short fsglmul_res_snan - tbl_fsglmul_op # NORM x SNAN |
| 10672 |
short tbl_fsglmul_op - tbl_fsglmul_op # |
| 10673 |
short tbl_fsglmul_op - tbl_fsglmul_op # |
| 10674 |
|
| 10675 |
short fsglmul_res_snan - tbl_fsglmul_op # SNAN x NORM |
| 10676 |
short fsglmul_res_snan - tbl_fsglmul_op # SNAN x ZERO |
| 10677 |
short fsglmul_res_snan - tbl_fsglmul_op # SNAN x INF |
| 10678 |
short fsglmul_res_snan - tbl_fsglmul_op # SNAN x QNAN |
| 10679 |
short fsglmul_res_snan - tbl_fsglmul_op # SNAN x DENORM |
| 10680 |
short fsglmul_res_snan - tbl_fsglmul_op # SNAN x SNAN |
| 10681 |
short tbl_fsglmul_op - tbl_fsglmul_op # |
| 10682 |
short tbl_fsglmul_op - tbl_fsglmul_op # |
| 10683 |
|
| 10684 |
fsglmul_res_operr: |
| 10685 |
bra.l res_operr |
| 10686 |
fsglmul_res_snan: |
| 10687 |
bra.l res_snan |
| 10688 |
fsglmul_res_qnan: |
| 10689 |
bra.l res_qnan |
| 10690 |
fsglmul_zero: |
| 10691 |
bra.l fmul_zero |
| 10692 |
fsglmul_inf_src: |
| 10693 |
bra.l fmul_inf_src |
| 10694 |
fsglmul_inf_dst: |
| 10695 |
bra.l fmul_inf_dst |
| 10696 |
|
| 10697 |
######################################################################### |
| 10698 |
# XDEF **************************************************************** # |
| 10699 |
# fsgldiv(): emulates the fsgldiv instruction # |
| 10700 |
# # |
| 10701 |
# XREF **************************************************************** # |
| 10702 |
# scale_to_zero_src() - scale src exponent to zero # |
| 10703 |
# scale_to_zero_dst() - scale dst exponent to zero # |
| 10704 |
# unf_res4() - return default underflow result for sglop # |
| 10705 |
# ovf_res() - return default overflow result # |
| 10706 |
# res_qnan() - return QNAN result # |
| 10707 |
# res_snan() - return SNAN result # |
| 10708 |
# # |
| 10709 |
# INPUT *************************************************************** # |
| 10710 |
# a0 = pointer to extended precision source operand # |
| 10711 |
# a1 = pointer to extended precision destination operand # |
| 10712 |
# d0 rnd prec,mode # |
| 10713 |
# # |
| 10714 |
# OUTPUT ************************************************************** # |
| 10715 |
# fp0 = result # |
| 10716 |
# fp1 = EXOP (if exception occurred) # |
| 10717 |
# # |
| 10718 |
# ALGORITHM *********************************************************** # |
| 10719 |
# Handle NANs, infinities, and zeroes as special cases. Divide # |
| 10720 |
# norms/denorms into ext/sgl/dbl precision. # |
| 10721 |
# For norms/denorms, scale the exponents such that a divide # |
| 10722 |
# instruction won't cause an exception. Use the regular fsgldiv to # |
| 10723 |
# compute a result. Check if the regular operands would have taken # |
| 10724 |
# an exception. If so, return the default overflow/underflow result # |
| 10725 |
# and return the EXOP if exceptions are enabled. Else, scale the # |
| 10726 |
# result operand to the proper exponent. # |
| 10727 |
# # |
| 10728 |
######################################################################### |
| 10729 |
|
| 10730 |
global fsgldiv |
| 10731 |
fsgldiv: |
| 10732 |
mov.l %d0,L_SCR3(%a6) # store rnd info |
| 10733 |
|
| 10734 |
clr.w %d1 |
| 10735 |
mov.b DTAG(%a6),%d1 |
| 10736 |
lsl.b &0x3,%d1 |
| 10737 |
or.b STAG(%a6),%d1 # combine src tags |
| 10738 |
|
| 10739 |
bne.w fsgldiv_not_norm # optimize on non-norm input |
| 10740 |
|
| 10741 |
# |
| 10742 |
# DIVIDE: NORMs and DENORMs ONLY! |
| 10743 |
# |
| 10744 |
fsgldiv_norm: |
| 10745 |
mov.w DST_EX(%a1),FP_SCR1_EX(%a6) |
| 10746 |
mov.l DST_HI(%a1),FP_SCR1_HI(%a6) |
| 10747 |
mov.l DST_LO(%a1),FP_SCR1_LO(%a6) |
| 10748 |
|
| 10749 |
mov.w SRC_EX(%a0),FP_SCR0_EX(%a6) |
| 10750 |
mov.l SRC_HI(%a0),FP_SCR0_HI(%a6) |
| 10751 |
mov.l SRC_LO(%a0),FP_SCR0_LO(%a6) |
| 10752 |
|
| 10753 |
bsr.l scale_to_zero_src # calculate scale factor 1 |
| 10754 |
mov.l %d0,-(%sp) # save scale factor 1 |
| 10755 |
|
| 10756 |
bsr.l scale_to_zero_dst # calculate scale factor 2 |
| 10757 |
|
| 10758 |
neg.l (%sp) # S.F. = scale1 - scale2 |
| 10759 |
add.l %d0,(%sp) |
| 10760 |
|
| 10761 |
mov.w 2+L_SCR3(%a6),%d1 # fetch precision,mode |
| 10762 |
lsr.b &0x6,%d1 |
| 10763 |
mov.l (%sp)+,%d0 |
| 10764 |
cmpi.l %d0,&0x3fff-0x7ffe |
| 10765 |
ble.w fsgldiv_may_ovfl |
| 10766 |
|
| 10767 |
cmpi.l %d0,&0x3fff-0x0000 # will result underflow? |
| 10768 |
beq.w fsgldiv_may_unfl # maybe |
| 10769 |
bgt.w fsgldiv_unfl # yes; go handle underflow |
| 10770 |
|
| 10771 |
fsgldiv_normal: |
| 10772 |
fmovm.x FP_SCR1(%a6),&0x80 # load dst op |
| 10773 |
|
| 10774 |
fmov.l L_SCR3(%a6),%fpcr # save FPCR |
| 10775 |
fmov.l &0x0,%fpsr # clear FPSR |
| 10776 |
|
| 10777 |
fsgldiv.x FP_SCR0(%a6),%fp0 # perform sgl divide |
| 10778 |
|
| 10779 |
fmov.l %fpsr,%d1 # save FPSR |
| 10780 |
fmov.l &0x0,%fpcr # clear FPCR |
| 10781 |
|
| 10782 |
or.l %d1,USER_FPSR(%a6) # save INEX2,N |
| 10783 |
|
| 10784 |
fsgldiv_normal_exit: |
| 10785 |
fmovm.x &0x80,FP_SCR0(%a6) # store result on stack |
| 10786 |
mov.l %d2,-(%sp) # save d2 |
| 10787 |
mov.w FP_SCR0_EX(%a6),%d1 # load {sgn,exp} |
| 10788 |
mov.l %d1,%d2 # make a copy |
| 10789 |
andi.l &0x7fff,%d1 # strip sign |
| 10790 |
andi.w &0x8000,%d2 # keep old sign |
| 10791 |
sub.l %d0,%d1 # add scale factor |
| 10792 |
or.w %d2,%d1 # concat old sign,new exp |
| 10793 |
mov.w %d1,FP_SCR0_EX(%a6) # insert new exponent |
| 10794 |
mov.l (%sp)+,%d2 # restore d2 |
| 10795 |
fmovm.x FP_SCR0(%a6),&0x80 # return result in fp0 |
| 10796 |
rts |
| 10797 |
|
| 10798 |
fsgldiv_may_ovfl: |
| 10799 |
fmovm.x FP_SCR1(%a6),&0x80 # load dst op |
| 10800 |
|
| 10801 |
fmov.l L_SCR3(%a6),%fpcr # set FPCR |
| 10802 |
fmov.l &0x0,%fpsr # set FPSR |
| 10803 |
|
| 10804 |
fsgldiv.x FP_SCR0(%a6),%fp0 # execute divide |
| 10805 |
|
| 10806 |
fmov.l %fpsr,%d1 |
| 10807 |
fmov.l &0x0,%fpcr |
| 10808 |
|
| 10809 |
or.l %d1,USER_FPSR(%a6) # save INEX,N |
| 10810 |
|
| 10811 |
fmovm.x &0x01,-(%sp) # save result to stack |
| 10812 |
mov.w (%sp),%d1 # fetch new exponent |
| 10813 |
add.l &0xc,%sp # clear result |
| 10814 |
andi.l &0x7fff,%d1 # strip sign |
| 10815 |
sub.l %d0,%d1 # add scale factor |
| 10816 |
cmp.l %d1,&0x7fff # did divide overflow? |
| 10817 |
blt.b fsgldiv_normal_exit |
| 10818 |
|
| 10819 |
fsgldiv_ovfl_tst: |
| 10820 |
or.w &ovfl_inx_mask,2+USER_FPSR(%a6) # set ovfl/aovfl/ainex |
| 10821 |
|
| 10822 |
mov.b FPCR_ENABLE(%a6),%d1 |
| 10823 |
andi.b &0x13,%d1 # is OVFL or INEX enabled? |
| 10824 |
bne.b fsgldiv_ovfl_ena # yes |
| 10825 |
|
| 10826 |
fsgldiv_ovfl_dis: |
| 10827 |
btst &neg_bit,FPSR_CC(%a6) # is result negative |
| 10828 |
sne %d1 # set sign param accordingly |
| 10829 |
mov.l L_SCR3(%a6),%d0 # pass prec:rnd |
| 10830 |
andi.b &0x30,%d0 # kill precision |
| 10831 |
bsr.l ovf_res # calculate default result |
| 10832 |
or.b %d0,FPSR_CC(%a6) # set INF if applicable |
| 10833 |
fmovm.x (%a0),&0x80 # return default result in fp0 |
| 10834 |
rts |
| 10835 |
|
| 10836 |
fsgldiv_ovfl_ena: |
| 10837 |
fmovm.x &0x80,FP_SCR0(%a6) # move result to stack |
| 10838 |
|
| 10839 |
mov.l %d2,-(%sp) # save d2 |
| 10840 |
mov.w FP_SCR0_EX(%a6),%d1 # fetch {sgn,exp} |
| 10841 |
mov.l %d1,%d2 # make a copy |
| 10842 |
andi.l &0x7fff,%d1 # strip sign |
| 10843 |
andi.w &0x8000,%d2 # keep old sign |
| 10844 |
sub.l %d0,%d1 # add scale factor |
| 10845 |
subi.l &0x6000,%d1 # subtract new bias |
| 10846 |
andi.w &0x7fff,%d1 # clear ms bit |
| 10847 |
or.w %d2,%d1 # concat old sign,new exp |
| 10848 |
mov.w %d1,FP_SCR0_EX(%a6) # insert new exponent |
| 10849 |
mov.l (%sp)+,%d2 # restore d2 |
| 10850 |
fmovm.x FP_SCR0(%a6),&0x40 # return EXOP in fp1 |
| 10851 |
bra.b fsgldiv_ovfl_dis |
| 10852 |
|
| 10853 |
fsgldiv_unfl: |
| 10854 |
bset &unfl_bit,FPSR_EXCEPT(%a6) # set unfl exc bit |
| 10855 |
|
| 10856 |
fmovm.x FP_SCR1(%a6),&0x80 # load dst op |
| 10857 |
|
| 10858 |
fmov.l &rz_mode*0x10,%fpcr # set FPCR |
| 10859 |
fmov.l &0x0,%fpsr # clear FPSR |
| 10860 |
|
| 10861 |
fsgldiv.x FP_SCR0(%a6),%fp0 # execute sgl divide |
| 10862 |
|
| 10863 |
fmov.l %fpsr,%d1 # save status |
| 10864 |
fmov.l &0x0,%fpcr # clear FPCR |
| 10865 |
|
| 10866 |
or.l %d1,USER_FPSR(%a6) # save INEX2,N |
| 10867 |
|
| 10868 |
mov.b FPCR_ENABLE(%a6),%d1 |
| 10869 |
andi.b &0x0b,%d1 # is UNFL or INEX enabled? |
| 10870 |
bne.b fsgldiv_unfl_ena # yes |
| 10871 |
|
| 10872 |
fsgldiv_unfl_dis: |
| 10873 |
fmovm.x &0x80,FP_SCR0(%a6) # store out result |
| 10874 |
|
| 10875 |
lea FP_SCR0(%a6),%a0 # pass: result addr |
| 10876 |
mov.l L_SCR3(%a6),%d1 # pass: rnd prec,mode |
| 10877 |
bsr.l unf_res4 # calculate default result |
| 10878 |
or.b %d0,FPSR_CC(%a6) # 'Z' bit may have been set |
| 10879 |
fmovm.x FP_SCR0(%a6),&0x80 # return default result in fp0 |
| 10880 |
rts |
| 10881 |
|
| 10882 |
# |
| 10883 |
# UNFL is enabled. |
| 10884 |
# |
| 10885 |
fsgldiv_unfl_ena: |
| 10886 |
fmovm.x FP_SCR1(%a6),&0x40 # load dst op |
| 10887 |
|
| 10888 |
fmov.l L_SCR3(%a6),%fpcr # set FPCR |
| 10889 |
fmov.l &0x0,%fpsr # clear FPSR |
| 10890 |
|
| 10891 |
fsgldiv.x FP_SCR0(%a6),%fp1 # execute sgl divide |
| 10892 |
|
| 10893 |
fmov.l &0x0,%fpcr # clear FPCR |
| 10894 |
|
| 10895 |
fmovm.x &0x40,FP_SCR0(%a6) # save result to stack |
| 10896 |
mov.l %d2,-(%sp) # save d2 |
| 10897 |
mov.w FP_SCR0_EX(%a6),%d1 # fetch {sgn,exp} |
| 10898 |
mov.l %d1,%d2 # make a copy |
| 10899 |
andi.l &0x7fff,%d1 # strip sign |
| 10900 |
andi.w &0x8000,%d2 # keep old sign |
| 10901 |
sub.l %d0,%d1 # add scale factor |
| 10902 |
addi.l &0x6000,%d1 # add bias |
| 10903 |
andi.w &0x7fff,%d1 # clear top bit |
| 10904 |
or.w %d2,%d1 # concat old sign, new exp |
| 10905 |
mov.w %d1,FP_SCR0_EX(%a6) # insert new exponent |
| 10906 |
mov.l (%sp)+,%d2 # restore d2 |
| 10907 |
fmovm.x FP_SCR0(%a6),&0x40 # return EXOP in fp1 |
| 10908 |
bra.b fsgldiv_unfl_dis |
| 10909 |
|
| 10910 |
# |
| 10911 |
# the divide operation MAY underflow: |
| 10912 |
# |
| 10913 |
fsgldiv_may_unfl: |
| 10914 |
fmovm.x FP_SCR1(%a6),&0x80 # load dst op |
| 10915 |
|
| 10916 |
fmov.l L_SCR3(%a6),%fpcr # set FPCR |
| 10917 |
fmov.l &0x0,%fpsr # clear FPSR |
| 10918 |
|
| 10919 |
fsgldiv.x FP_SCR0(%a6),%fp0 # execute sgl divide |
| 10920 |
|
| 10921 |
fmov.l %fpsr,%d1 # save status |
| 10922 |
fmov.l &0x0,%fpcr # clear FPCR |
| 10923 |
|
| 10924 |
or.l %d1,USER_FPSR(%a6) # save INEX2,N |
| 10925 |
|
| 10926 |
fabs.x %fp0,%fp1 # make a copy of result |
| 10927 |
fcmp.b %fp1,&0x1 # is |result| > 1.b? |
| 10928 |
fbgt.w fsgldiv_normal_exit # no; no underflow occurred |
| 10929 |
fblt.w fsgldiv_unfl # yes; underflow occurred |
| 10930 |
|
| 10931 |
# |
| 10932 |
# we still don't know if underflow occurred. result is ~ equal to 1. but, |
| 10933 |
# we don't know if the result was an underflow that rounded up to a 1 |
| 10934 |
# or a normalized number that rounded down to a 1. so, redo the entire |
| 10935 |
# operation using RZ as the rounding mode to see what the pre-rounded |
| 10936 |
# result is. this case should be relatively rare. |
| 10937 |
# |
| 10938 |
fmovm.x FP_SCR1(%a6),&0x40 # load dst op into %fp1 |
| 10939 |
|
| 10940 |
clr.l %d1 # clear scratch register |
| 10941 |
ori.b &rz_mode*0x10,%d1 # force RZ rnd mode |
| 10942 |
|
| 10943 |
fmov.l %d1,%fpcr # set FPCR |
| 10944 |
fmov.l &0x0,%fpsr # clear FPSR |
| 10945 |
|
| 10946 |
fsgldiv.x FP_SCR0(%a6),%fp1 # execute sgl divide |
| 10947 |
|
| 10948 |
fmov.l &0x0,%fpcr # clear FPCR |
| 10949 |
fabs.x %fp1 # make absolute value |
| 10950 |
fcmp.b %fp1,&0x1 # is |result| < 1.b? |
| 10951 |
fbge.w fsgldiv_normal_exit # no; no underflow occurred |
| 10952 |
bra.w fsgldiv_unfl # yes; underflow occurred |
| 10953 |
|
| 10954 |
############################################################################ |
| 10955 |
|
| 10956 |
# |
| 10957 |
# Divide: inputs are not both normalized; what are they? |
| 10958 |
# |
| 10959 |
fsgldiv_not_norm: |
| 10960 |
mov.w (tbl_fsgldiv_op.b,%pc,%d1.w*2),%d1 |
| 10961 |
jmp (tbl_fsgldiv_op.b,%pc,%d1.w*1) |
| 10962 |
|
| 10963 |
swbeg &48 |
| 10964 |
tbl_fsgldiv_op: |
| 10965 |
short fsgldiv_norm - tbl_fsgldiv_op # NORM / NORM |
| 10966 |
short fsgldiv_inf_load - tbl_fsgldiv_op # NORM / ZERO |
| 10967 |
short fsgldiv_zero_load - tbl_fsgldiv_op # NORM / INF |
| 10968 |
short fsgldiv_res_qnan - tbl_fsgldiv_op # NORM / QNAN |
| 10969 |
short fsgldiv_norm - tbl_fsgldiv_op # NORM / DENORM |
| 10970 |
short fsgldiv_res_snan - tbl_fsgldiv_op # NORM / SNAN |
| 10971 |
short tbl_fsgldiv_op - tbl_fsgldiv_op # |
| 10972 |
short tbl_fsgldiv_op - tbl_fsgldiv_op # |
| 10973 |
|
| 10974 |
short fsgldiv_zero_load - tbl_fsgldiv_op # ZERO / NORM |
| 10975 |
short fsgldiv_res_operr - tbl_fsgldiv_op # ZERO / ZERO |
| 10976 |
short fsgldiv_zero_load - tbl_fsgldiv_op # ZERO / INF |
| 10977 |
short fsgldiv_res_qnan - tbl_fsgldiv_op # ZERO / QNAN |
| 10978 |
short fsgldiv_zero_load - tbl_fsgldiv_op # ZERO / DENORM |
| 10979 |
short fsgldiv_res_snan - tbl_fsgldiv_op # ZERO / SNAN |
| 10980 |
short tbl_fsgldiv_op - tbl_fsgldiv_op # |
| 10981 |
short tbl_fsgldiv_op - tbl_fsgldiv_op # |
| 10982 |
|
| 10983 |
short fsgldiv_inf_dst - tbl_fsgldiv_op # INF / NORM |
| 10984 |
short fsgldiv_inf_dst - tbl_fsgldiv_op # INF / ZERO |
| 10985 |
short fsgldiv_res_operr - tbl_fsgldiv_op # INF / INF |
| 10986 |
short fsgldiv_res_qnan - tbl_fsgldiv_op # INF / QNAN |
| 10987 |
short fsgldiv_inf_dst - tbl_fsgldiv_op # INF / DENORM |
| 10988 |
short fsgldiv_res_snan - tbl_fsgldiv_op # INF / SNAN |
| 10989 |
short tbl_fsgldiv_op - tbl_fsgldiv_op # |
| 10990 |
short tbl_fsgldiv_op - tbl_fsgldiv_op # |
| 10991 |
|
| 10992 |
short fsgldiv_res_qnan - tbl_fsgldiv_op # QNAN / NORM |
| 10993 |
short fsgldiv_res_qnan - tbl_fsgldiv_op # QNAN / ZERO |
| 10994 |
short fsgldiv_res_qnan - tbl_fsgldiv_op # QNAN / INF |
| 10995 |
short fsgldiv_res_qnan - tbl_fsgldiv_op # QNAN / QNAN |
| 10996 |
short fsgldiv_res_qnan - tbl_fsgldiv_op # QNAN / DENORM |
| 10997 |
short fsgldiv_res_snan - tbl_fsgldiv_op # QNAN / SNAN |
| 10998 |
short tbl_fsgldiv_op - tbl_fsgldiv_op # |
| 10999 |
short tbl_fsgldiv_op - tbl_fsgldiv_op # |
| 11000 |
|
| 11001 |
short fsgldiv_norm - tbl_fsgldiv_op # DENORM / NORM |
| 11002 |
short fsgldiv_inf_load - tbl_fsgldiv_op # DENORM / ZERO |
| 11003 |
short fsgldiv_zero_load - tbl_fsgldiv_op # DENORM / INF |
| 11004 |
short fsgldiv_res_qnan - tbl_fsgldiv_op # DENORM / QNAN |
| 11005 |
short fsgldiv_norm - tbl_fsgldiv_op # DENORM / DENORM |
| 11006 |
short fsgldiv_res_snan - tbl_fsgldiv_op # DENORM / SNAN |
| 11007 |
short tbl_fsgldiv_op - tbl_fsgldiv_op # |
| 11008 |
short tbl_fsgldiv_op - tbl_fsgldiv_op # |
| 11009 |
|
| 11010 |
short fsgldiv_res_snan - tbl_fsgldiv_op # SNAN / NORM |
| 11011 |
short fsgldiv_res_snan - tbl_fsgldiv_op # SNAN / ZERO |
| 11012 |
short fsgldiv_res_snan - tbl_fsgldiv_op # SNAN / INF |
| 11013 |
short fsgldiv_res_snan - tbl_fsgldiv_op # SNAN / QNAN |
| 11014 |
short fsgldiv_res_snan - tbl_fsgldiv_op # SNAN / DENORM |
| 11015 |
short fsgldiv_res_snan - tbl_fsgldiv_op # SNAN / SNAN |
| 11016 |
short tbl_fsgldiv_op - tbl_fsgldiv_op # |
| 11017 |
short tbl_fsgldiv_op - tbl_fsgldiv_op # |
| 11018 |
|
| 11019 |
fsgldiv_res_qnan: |
| 11020 |
bra.l res_qnan |
| 11021 |
fsgldiv_res_snan: |
| 11022 |
bra.l res_snan |
| 11023 |
fsgldiv_res_operr: |
| 11024 |
bra.l res_operr |
| 11025 |
fsgldiv_inf_load: |
| 11026 |
bra.l fdiv_inf_load |
| 11027 |
fsgldiv_zero_load: |
| 11028 |
bra.l fdiv_zero_load |
| 11029 |
fsgldiv_inf_dst: |
| 11030 |
bra.l fdiv_inf_dst |
| 11031 |
|
| 11032 |
######################################################################### |
| 11033 |
# XDEF **************************************************************** # |
| 11034 |
# fadd(): emulates the fadd instruction # |
| 11035 |
# fsadd(): emulates the fadd instruction # |
| 11036 |
# fdadd(): emulates the fdadd instruction # |
| 11037 |
# # |
| 11038 |
# XREF **************************************************************** # |
| 11039 |
# addsub_scaler2() - scale the operands so they won't take exc # |
| 11040 |
# ovf_res() - return default overflow result # |
| 11041 |
# unf_res() - return default underflow result # |
| 11042 |
# res_qnan() - set QNAN result # |
| 11043 |
# res_snan() - set SNAN result # |
| 11044 |
# res_operr() - set OPERR result # |
| 11045 |
# scale_to_zero_src() - set src operand exponent equal to zero # |
| 11046 |
# scale_to_zero_dst() - set dst operand exponent equal to zero # |
| 11047 |
# # |
| 11048 |
# INPUT *************************************************************** # |
| 11049 |
# a0 = pointer to extended precision source operand # |
| 11050 |
# a1 = pointer to extended precision destination operand # |
| 11051 |
# # |
| 11052 |
# OUTPUT ************************************************************** # |
| 11053 |
# fp0 = result # |
| 11054 |
# fp1 = EXOP (if exception occurred) # |
| 11055 |
# # |
| 11056 |
# ALGORITHM *********************************************************** # |
| 11057 |
# Handle NANs, infinities, and zeroes as special cases. Divide # |
| 11058 |
# norms into extended, single, and double precision. # |
| 11059 |
# Do addition after scaling exponents such that exception won't # |
| 11060 |
# occur. Then, check result exponent to see if exception would have # |
| 11061 |
# occurred. If so, return default result and maybe EXOP. Else, insert # |
| 11062 |
# the correct result exponent and return. Set FPSR bits as appropriate. # |
| 11063 |
# # |
| 11064 |
######################################################################### |
| 11065 |
|
| 11066 |
global fsadd |
| 11067 |
fsadd: |
| 11068 |
andi.b &0x30,%d0 # clear rnd prec |
| 11069 |
ori.b &s_mode*0x10,%d0 # insert sgl prec |
| 11070 |
bra.b fadd |
| 11071 |
|
| 11072 |
global fdadd |
| 11073 |
fdadd: |
| 11074 |
andi.b &0x30,%d0 # clear rnd prec |
| 11075 |
ori.b &d_mode*0x10,%d0 # insert dbl prec |
| 11076 |
|
| 11077 |
global fadd |
| 11078 |
fadd: |
| 11079 |
mov.l %d0,L_SCR3(%a6) # store rnd info |
| 11080 |
|
| 11081 |
clr.w %d1 |
| 11082 |
mov.b DTAG(%a6),%d1 |
| 11083 |
lsl.b &0x3,%d1 |
| 11084 |
or.b STAG(%a6),%d1 # combine src tags |
| 11085 |
|
| 11086 |
bne.w fadd_not_norm # optimize on non-norm input |
| 11087 |
|
| 11088 |
# |
| 11089 |
# ADD: norms and denorms |
| 11090 |
# |
| 11091 |
fadd_norm: |
| 11092 |
bsr.l addsub_scaler2 # scale exponents |
| 11093 |
|
| 11094 |
fadd_zero_entry: |
| 11095 |
fmovm.x FP_SCR1(%a6),&0x80 # load dst op |
| 11096 |
|
| 11097 |
fmov.l &0x0,%fpsr # clear FPSR |
| 11098 |
fmov.l L_SCR3(%a6),%fpcr # set FPCR |
| 11099 |
|
| 11100 |
fadd.x FP_SCR0(%a6),%fp0 # execute add |
| 11101 |
|
| 11102 |
fmov.l &0x0,%fpcr # clear FPCR |
| 11103 |
fmov.l %fpsr,%d1 # fetch INEX2,N,Z |
| 11104 |
|
| 11105 |
or.l %d1,USER_FPSR(%a6) # save exc and ccode bits |
| 11106 |
|
| 11107 |
fbeq.w fadd_zero_exit # if result is zero, end now |
| 11108 |
|
| 11109 |
mov.l %d2,-(%sp) # save d2 |
| 11110 |
|
| 11111 |
fmovm.x &0x01,-(%sp) # save result to stack |
| 11112 |
|
| 11113 |
mov.w 2+L_SCR3(%a6),%d1 |
| 11114 |
lsr.b &0x6,%d1 |
| 11115 |
|
| 11116 |
mov.w (%sp),%d2 # fetch new sign, exp |
| 11117 |
andi.l &0x7fff,%d2 # strip sign |
| 11118 |
sub.l %d0,%d2 # add scale factor |
| 11119 |
|
| 11120 |
cmp.l %d2,(tbl_fadd_ovfl.b,%pc,%d1.w*4) # is it an overflow? |
| 11121 |
bge.b fadd_ovfl # yes |
| 11122 |
|
| 11123 |
cmp.l %d2,(tbl_fadd_unfl.b,%pc,%d1.w*4) # is it an underflow? |
| 11124 |
blt.w fadd_unfl # yes |
| 11125 |
beq.w fadd_may_unfl # maybe; go find out |
| 11126 |
|
| 11127 |
fadd_normal: |
| 11128 |
mov.w (%sp),%d1 |
| 11129 |
andi.w &0x8000,%d1 # keep sign |
| 11130 |
or.w %d2,%d1 # concat sign,new exp |
| 11131 |
mov.w %d1,(%sp) # insert new exponent |
| 11132 |
|
| 11133 |
fmovm.x (%sp)+,&0x80 # return result in fp0 |
| 11134 |
|
| 11135 |
mov.l (%sp)+,%d2 # restore d2 |
| 11136 |
rts |
| 11137 |
|
| 11138 |
fadd_zero_exit: |
| 11139 |
# fmov.s &0x00000000,%fp0 # return zero in fp0 |
| 11140 |
rts |
| 11141 |
|
| 11142 |
tbl_fadd_ovfl: |
| 11143 |
long 0x7fff # ext ovfl |
| 11144 |
long 0x407f # sgl ovfl |
| 11145 |
long 0x43ff # dbl ovfl |
| 11146 |
|
| 11147 |
tbl_fadd_unfl: |
| 11148 |
long 0x0000 # ext unfl |
| 11149 |
long 0x3f81 # sgl unfl |
| 11150 |
long 0x3c01 # dbl unfl |
| 11151 |
|
| 11152 |
fadd_ovfl: |
| 11153 |
or.l &ovfl_inx_mask,USER_FPSR(%a6) # set ovfl/aovfl/ainex |
| 11154 |
|
| 11155 |
mov.b FPCR_ENABLE(%a6),%d1 |
| 11156 |
andi.b &0x13,%d1 # is OVFL or INEX enabled? |
| 11157 |
bne.b fadd_ovfl_ena # yes |
| 11158 |
|
| 11159 |
add.l &0xc,%sp |
| 11160 |
fadd_ovfl_dis: |
| 11161 |
btst &neg_bit,FPSR_CC(%a6) # is result negative? |
| 11162 |
sne %d1 # set sign param accordingly |
| 11163 |
mov.l L_SCR3(%a6),%d0 # pass prec:rnd |
| 11164 |
bsr.l ovf_res # calculate default result |
| 11165 |
or.b %d0,FPSR_CC(%a6) # set INF,N if applicable |
| 11166 |
fmovm.x (%a0),&0x80 # return default result in fp0 |
| 11167 |
mov.l (%sp)+,%d2 # restore d2 |
| 11168 |
rts |
| 11169 |
|
| 11170 |
fadd_ovfl_ena: |
| 11171 |
mov.b L_SCR3(%a6),%d1 |
| 11172 |
andi.b &0xc0,%d1 # is precision extended? |
| 11173 |
bne.b fadd_ovfl_ena_sd # no; prec = sgl or dbl |
| 11174 |
|
| 11175 |
fadd_ovfl_ena_cont: |
| 11176 |
mov.w (%sp),%d1 |
| 11177 |
andi.w &0x8000,%d1 # keep sign |
| 11178 |
subi.l &0x6000,%d2 # add extra bias |
| 11179 |
andi.w &0x7fff,%d2 |
| 11180 |
or.w %d2,%d1 # concat sign,new exp |
| 11181 |
mov.w %d1,(%sp) # insert new exponent |
| 11182 |
|
| 11183 |
fmovm.x (%sp)+,&0x40 # return EXOP in fp1 |
| 11184 |
bra.b fadd_ovfl_dis |
| 11185 |
|
| 11186 |
fadd_ovfl_ena_sd: |
| 11187 |
fmovm.x FP_SCR1(%a6),&0x80 # load dst op |
| 11188 |
|
| 11189 |
mov.l L_SCR3(%a6),%d1 |
| 11190 |
andi.b &0x30,%d1 # keep rnd mode |
| 11191 |
fmov.l %d1,%fpcr # set FPCR |
| 11192 |
|
| 11193 |
fadd.x FP_SCR0(%a6),%fp0 # execute add |
| 11194 |
|
| 11195 |
fmov.l &0x0,%fpcr # clear FPCR |
| 11196 |
|
| 11197 |
add.l &0xc,%sp |
| 11198 |
fmovm.x &0x01,-(%sp) |
| 11199 |
bra.b fadd_ovfl_ena_cont |
| 11200 |
|
| 11201 |
fadd_unfl: |
| 11202 |
bset &unfl_bit,FPSR_EXCEPT(%a6) # set unfl exc bit |
| 11203 |
|
| 11204 |
add.l &0xc,%sp |
| 11205 |
|
| 11206 |
fmovm.x FP_SCR1(%a6),&0x80 # load dst op |
| 11207 |
|
| 11208 |
fmov.l &rz_mode*0x10,%fpcr # set FPCR |
| 11209 |
fmov.l &0x0,%fpsr # clear FPSR |
| 11210 |
|
| 11211 |
fadd.x FP_SCR0(%a6),%fp0 # execute add |
| 11212 |
|
| 11213 |
fmov.l &0x0,%fpcr # clear FPCR |
| 11214 |
fmov.l %fpsr,%d1 # save status |
| 11215 |
|
| 11216 |
or.l %d1,USER_FPSR(%a6) # save INEX,N |
| 11217 |
|
| 11218 |
mov.b FPCR_ENABLE(%a6),%d1 |
| 11219 |
andi.b &0x0b,%d1 # is UNFL or INEX enabled? |
| 11220 |
bne.b fadd_unfl_ena # yes |
| 11221 |
|
| 11222 |
fadd_unfl_dis: |
| 11223 |
fmovm.x &0x80,FP_SCR0(%a6) # store out result |
| 11224 |
|
| 11225 |
lea FP_SCR0(%a6),%a0 # pass: result addr |
| 11226 |
mov.l L_SCR3(%a6),%d1 # pass: rnd prec,mode |
| 11227 |
bsr.l unf_res # calculate default result |
| 11228 |
or.b %d0,FPSR_CC(%a6) # 'Z' bit may have been set |
| 11229 |
fmovm.x FP_SCR0(%a6),&0x80 # return default result in fp0 |
| 11230 |
mov.l (%sp)+,%d2 # restore d2 |
| 11231 |
rts |
| 11232 |
|
| 11233 |
fadd_unfl_ena: |
| 11234 |
fmovm.x FP_SCR1(%a6),&0x40 # load dst op |
| 11235 |
|
| 11236 |
mov.l L_SCR3(%a6),%d1 |
| 11237 |
andi.b &0xc0,%d1 # is precision extended? |
| 11238 |
bne.b fadd_unfl_ena_sd # no; sgl or dbl |
| 11239 |
|
| 11240 |
fmov.l L_SCR3(%a6),%fpcr # set FPCR |
| 11241 |
|
| 11242 |
fadd_unfl_ena_cont: |
| 11243 |
fmov.l &0x0,%fpsr # clear FPSR |
| 11244 |
|
| 11245 |
fadd.x FP_SCR0(%a6),%fp1 # execute multiply |
| 11246 |
|
| 11247 |
fmov.l &0x0,%fpcr # clear FPCR |
| 11248 |
|
| 11249 |
fmovm.x &0x40,FP_SCR0(%a6) # save result to stack |
| 11250 |
mov.w FP_SCR0_EX(%a6),%d1 # fetch {sgn,exp} |
| 11251 |
mov.l %d1,%d2 # make a copy |
| 11252 |
andi.l &0x7fff,%d1 # strip sign |
| 11253 |
andi.w &0x8000,%d2 # keep old sign |
| 11254 |
sub.l %d0,%d1 # add scale factor |
| 11255 |
addi.l &0x6000,%d1 # add new bias |
| 11256 |
andi.w &0x7fff,%d1 # clear top bit |
| 11257 |
or.w %d2,%d1 # concat sign,new exp |
| 11258 |
mov.w %d1,FP_SCR0_EX(%a6) # insert new exponent |
| 11259 |
fmovm.x FP_SCR0(%a6),&0x40 # return EXOP in fp1 |
| 11260 |
bra.w fadd_unfl_dis |
| 11261 |
|
| 11262 |
fadd_unfl_ena_sd: |
| 11263 |
mov.l L_SCR3(%a6),%d1 |
| 11264 |
andi.b &0x30,%d1 # use only rnd mode |
| 11265 |
fmov.l %d1,%fpcr # set FPCR |
| 11266 |
|
| 11267 |
bra.b fadd_unfl_ena_cont |
| 11268 |
|
| 11269 |
# |
| 11270 |
# result is equal to the smallest normalized number in the selected precision |
| 11271 |
# if the precision is extended, this result could not have come from an |
| 11272 |
# underflow that rounded up. |
| 11273 |
# |
| 11274 |
fadd_may_unfl: |
| 11275 |
mov.l L_SCR3(%a6),%d1 |
| 11276 |
andi.b &0xc0,%d1 |
| 11277 |
beq.w fadd_normal # yes; no underflow occurred |
| 11278 |
|
| 11279 |
mov.l 0x4(%sp),%d1 # extract hi(man) |
| 11280 |
cmpi.l %d1,&0x80000000 # is hi(man) = 0x80000000? |
| 11281 |
bne.w fadd_normal # no; no underflow occurred |
| 11282 |
|
| 11283 |
tst.l 0x8(%sp) # is lo(man) = 0x0? |
| 11284 |
bne.w fadd_normal # no; no underflow occurred |
| 11285 |
|
| 11286 |
btst &inex2_bit,FPSR_EXCEPT(%a6) # is INEX2 set? |
| 11287 |
beq.w fadd_normal # no; no underflow occurred |
| 11288 |
|
| 11289 |
# |
| 11290 |
# ok, so now the result has a exponent equal to the smallest normalized |
| 11291 |
# exponent for the selected precision. also, the mantissa is equal to |
| 11292 |
# 0x8000000000000000 and this mantissa is the result of rounding non-zero |
| 11293 |
# g,r,s. |
| 11294 |
# now, we must determine whether the pre-rounded result was an underflow |
| 11295 |
# rounded "up" or a normalized number rounded "down". |
| 11296 |
# so, we do this be re-executing the add using RZ as the rounding mode and |
| 11297 |
# seeing if the new result is smaller or equal to the current result. |
| 11298 |
# |
| 11299 |
fmovm.x FP_SCR1(%a6),&0x40 # load dst op into fp1 |
| 11300 |
|
| 11301 |
mov.l L_SCR3(%a6),%d1 |
| 11302 |
andi.b &0xc0,%d1 # keep rnd prec |
| 11303 |
ori.b &rz_mode*0x10,%d1 # insert rnd mode |
| 11304 |
fmov.l %d1,%fpcr # set FPCR |
| 11305 |
fmov.l &0x0,%fpsr # clear FPSR |
| 11306 |
|
| 11307 |
fadd.x FP_SCR0(%a6),%fp1 # execute add |
| 11308 |
|
| 11309 |
fmov.l &0x0,%fpcr # clear FPCR |
| 11310 |
|
| 11311 |
fabs.x %fp0 # compare absolute values |
| 11312 |
fabs.x %fp1 |
| 11313 |
fcmp.x %fp0,%fp1 # is first result > second? |
| 11314 |
|
| 11315 |
fbgt.w fadd_unfl # yes; it's an underflow |
| 11316 |
bra.w fadd_normal # no; it's not an underflow |
| 11317 |
|
| 11318 |
########################################################################## |
| 11319 |
|
| 11320 |
# |
| 11321 |
# Add: inputs are not both normalized; what are they? |
| 11322 |
# |
| 11323 |
fadd_not_norm: |
| 11324 |
mov.w (tbl_fadd_op.b,%pc,%d1.w*2),%d1 |
| 11325 |
jmp (tbl_fadd_op.b,%pc,%d1.w*1) |
| 11326 |
|
| 11327 |
swbeg &48 |
| 11328 |
tbl_fadd_op: |
| 11329 |
short fadd_norm - tbl_fadd_op # NORM + NORM |
| 11330 |
short fadd_zero_src - tbl_fadd_op # NORM + ZERO |
| 11331 |
short fadd_inf_src - tbl_fadd_op # NORM + INF |
| 11332 |
short fadd_res_qnan - tbl_fadd_op # NORM + QNAN |
| 11333 |
short fadd_norm - tbl_fadd_op # NORM + DENORM |
| 11334 |
short fadd_res_snan - tbl_fadd_op # NORM + SNAN |
| 11335 |
short tbl_fadd_op - tbl_fadd_op # |
| 11336 |
short tbl_fadd_op - tbl_fadd_op # |
| 11337 |
|
| 11338 |
short fadd_zero_dst - tbl_fadd_op # ZERO + NORM |
| 11339 |
short fadd_zero_2 - tbl_fadd_op # ZERO + ZERO |
| 11340 |
short fadd_inf_src - tbl_fadd_op # ZERO + INF |
| 11341 |
short fadd_res_qnan - tbl_fadd_op # NORM + QNAN |
| 11342 |
short fadd_zero_dst - tbl_fadd_op # ZERO + DENORM |
| 11343 |
short fadd_res_snan - tbl_fadd_op # NORM + SNAN |
| 11344 |
short tbl_fadd_op - tbl_fadd_op # |
| 11345 |
short tbl_fadd_op - tbl_fadd_op # |
| 11346 |
|
| 11347 |
short fadd_inf_dst - tbl_fadd_op # INF + NORM |
| 11348 |
short fadd_inf_dst - tbl_fadd_op # INF + ZERO |
| 11349 |
short fadd_inf_2 - tbl_fadd_op # INF + INF |
| 11350 |
short fadd_res_qnan - tbl_fadd_op # NORM + QNAN |
| 11351 |
short fadd_inf_dst - tbl_fadd_op # INF + DENORM |
| 11352 |
short fadd_res_snan - tbl_fadd_op # NORM + SNAN |
| 11353 |
short tbl_fadd_op - tbl_fadd_op # |
| 11354 |
short tbl_fadd_op - tbl_fadd_op # |
| 11355 |
|
| 11356 |
short fadd_res_qnan - tbl_fadd_op # QNAN + NORM |
| 11357 |
short fadd_res_qnan - tbl_fadd_op # QNAN + ZERO |
| 11358 |
short fadd_res_qnan - tbl_fadd_op # QNAN + INF |
| 11359 |
short fadd_res_qnan - tbl_fadd_op # QNAN + QNAN |
| 11360 |
short fadd_res_qnan - tbl_fadd_op # QNAN + DENORM |
| 11361 |
short fadd_res_snan - tbl_fadd_op # QNAN + SNAN |
| 11362 |
short tbl_fadd_op - tbl_fadd_op # |
| 11363 |
short tbl_fadd_op - tbl_fadd_op # |
| 11364 |
|
| 11365 |
short fadd_norm - tbl_fadd_op # DENORM + NORM |
| 11366 |
short fadd_zero_src - tbl_fadd_op # DENORM + ZERO |
| 11367 |
short fadd_inf_src - tbl_fadd_op # DENORM + INF |
| 11368 |
short fadd_res_qnan - tbl_fadd_op # NORM + QNAN |
| 11369 |
short fadd_norm - tbl_fadd_op # DENORM + DENORM |
| 11370 |
short fadd_res_snan - tbl_fadd_op # NORM + SNAN |
| 11371 |
short tbl_fadd_op - tbl_fadd_op # |
| 11372 |
short tbl_fadd_op - tbl_fadd_op # |
| 11373 |
|
| 11374 |
short fadd_res_snan - tbl_fadd_op # SNAN + NORM |
| 11375 |
short fadd_res_snan - tbl_fadd_op # SNAN + ZERO |
| 11376 |
short fadd_res_snan - tbl_fadd_op # SNAN + INF |
| 11377 |
short fadd_res_snan - tbl_fadd_op # SNAN + QNAN |
| 11378 |
short fadd_res_snan - tbl_fadd_op # SNAN + DENORM |
| 11379 |
short fadd_res_snan - tbl_fadd_op # SNAN + SNAN |
| 11380 |
short tbl_fadd_op - tbl_fadd_op # |
| 11381 |
short tbl_fadd_op - tbl_fadd_op # |
| 11382 |
|
| 11383 |
fadd_res_qnan: |
| 11384 |
bra.l res_qnan |
| 11385 |
fadd_res_snan: |
| 11386 |
bra.l res_snan |
| 11387 |
|
| 11388 |
# |
| 11389 |
# both operands are ZEROes |
| 11390 |
# |
| 11391 |
fadd_zero_2: |
| 11392 |
mov.b SRC_EX(%a0),%d0 # are the signs opposite |
| 11393 |
mov.b DST_EX(%a1),%d1 |
| 11394 |
eor.b %d0,%d1 |
| 11395 |
bmi.w fadd_zero_2_chk_rm # weed out (-ZERO)+(+ZERO) |
| 11396 |
|
| 11397 |
# the signs are the same. so determine whether they are positive or negative |
| 11398 |
# and return the appropriately signed zero. |
| 11399 |
tst.b %d0 # are ZEROes positive or negative? |
| 11400 |
bmi.b fadd_zero_rm # negative |
| 11401 |
fmov.s &0x00000000,%fp0 # return +ZERO |
| 11402 |
mov.b &z_bmask,FPSR_CC(%a6) # set Z |
| 11403 |
rts |
| 11404 |
|
| 11405 |
# |
| 11406 |
# the ZEROes have opposite signs: |
| 11407 |
# - Therefore, we return +ZERO if the rounding modes are RN,RZ, or RP. |
| 11408 |
# - -ZERO is returned in the case of RM. |
| 11409 |
# |
| 11410 |
fadd_zero_2_chk_rm: |
| 11411 |
mov.b 3+L_SCR3(%a6),%d1 |
| 11412 |
andi.b &0x30,%d1 # extract rnd mode |
| 11413 |
cmpi.b %d1,&rm_mode*0x10 # is rnd mode == RM? |
| 11414 |
beq.b fadd_zero_rm # yes |
| 11415 |
fmov.s &0x00000000,%fp0 # return +ZERO |
| 11416 |
mov.b &z_bmask,FPSR_CC(%a6) # set Z |
| 11417 |
rts |
| 11418 |
|
| 11419 |
fadd_zero_rm: |
| 11420 |
fmov.s &0x80000000,%fp0 # return -ZERO |
| 11421 |
mov.b &neg_bmask+z_bmask,FPSR_CC(%a6) # set NEG/Z |
| 11422 |
rts |
| 11423 |
|
| 11424 |
# |
| 11425 |
# one operand is a ZERO and the other is a DENORM or NORM. scale |
| 11426 |
# the DENORM or NORM and jump to the regular fadd routine. |
| 11427 |
# |
| 11428 |
fadd_zero_dst: |
| 11429 |
mov.w SRC_EX(%a0),FP_SCR0_EX(%a6) |
| 11430 |
mov.l SRC_HI(%a0),FP_SCR0_HI(%a6) |
| 11431 |
mov.l SRC_LO(%a0),FP_SCR0_LO(%a6) |
| 11432 |
bsr.l scale_to_zero_src # scale the operand |
| 11433 |
clr.w FP_SCR1_EX(%a6) |
| 11434 |
clr.l FP_SCR1_HI(%a6) |
| 11435 |
clr.l FP_SCR1_LO(%a6) |
| 11436 |
bra.w fadd_zero_entry # go execute fadd |
| 11437 |
|
| 11438 |
fadd_zero_src: |
| 11439 |
mov.w DST_EX(%a1),FP_SCR1_EX(%a6) |
| 11440 |
mov.l DST_HI(%a1),FP_SCR1_HI(%a6) |
| 11441 |
mov.l DST_LO(%a1),FP_SCR1_LO(%a6) |
| 11442 |
bsr.l scale_to_zero_dst # scale the operand |
| 11443 |
clr.w FP_SCR0_EX(%a6) |
| 11444 |
clr.l FP_SCR0_HI(%a6) |
| 11445 |
clr.l FP_SCR0_LO(%a6) |
| 11446 |
bra.w fadd_zero_entry # go execute fadd |
| 11447 |
|
| 11448 |
# |
| 11449 |
# both operands are INFs. an OPERR will result if the INFs have |
| 11450 |
# different signs. else, an INF of the same sign is returned |
| 11451 |
# |
| 11452 |
fadd_inf_2: |
| 11453 |
mov.b SRC_EX(%a0),%d0 # exclusive or the signs |
| 11454 |
mov.b DST_EX(%a1),%d1 |
| 11455 |
eor.b %d1,%d0 |
| 11456 |
bmi.l res_operr # weed out (-INF)+(+INF) |
| 11457 |
|
| 11458 |
# ok, so it's not an OPERR. but, we do have to remember to return the |
| 11459 |
# src INF since that's where the 881/882 gets the j-bit from... |
| 11460 |
|
| 11461 |
# |
| 11462 |
# operands are INF and one of {ZERO, INF, DENORM, NORM} |
| 11463 |
# |
| 11464 |
fadd_inf_src: |
| 11465 |
fmovm.x SRC(%a0),&0x80 # return src INF |
| 11466 |
tst.b SRC_EX(%a0) # is INF positive? |
| 11467 |
bpl.b fadd_inf_done # yes; we're done |
| 11468 |
mov.b &neg_bmask+inf_bmask,FPSR_CC(%a6) # set INF/NEG |
| 11469 |
rts |
| 11470 |
|
| 11471 |
# |
| 11472 |
# operands are INF and one of {ZERO, INF, DENORM, NORM} |
| 11473 |
# |
| 11474 |
fadd_inf_dst: |
| 11475 |
fmovm.x DST(%a1),&0x80 # return dst INF |
| 11476 |
tst.b DST_EX(%a1) # is INF positive? |
| 11477 |
bpl.b fadd_inf_done # yes; we're done |
| 11478 |
mov.b &neg_bmask+inf_bmask,FPSR_CC(%a6) # set INF/NEG |
| 11479 |
rts |
| 11480 |
|
| 11481 |
fadd_inf_done: |
| 11482 |
mov.b &inf_bmask,FPSR_CC(%a6) # set INF |
| 11483 |
rts |
| 11484 |
|
| 11485 |
######################################################################### |
| 11486 |
# XDEF **************************************************************** # |
| 11487 |
# fsub(): emulates the fsub instruction # |
| 11488 |
# fssub(): emulates the fssub instruction # |
| 11489 |
# fdsub(): emulates the fdsub instruction # |
| 11490 |
# # |
| 11491 |
# XREF **************************************************************** # |
| 11492 |
# addsub_scaler2() - scale the operands so they won't take exc # |
| 11493 |
# ovf_res() - return default overflow result # |
| 11494 |
# unf_res() - return default underflow result # |
| 11495 |
# res_qnan() - set QNAN result # |
| 11496 |
# res_snan() - set SNAN result # |
| 11497 |
# res_operr() - set OPERR result # |
| 11498 |
# scale_to_zero_src() - set src operand exponent equal to zero # |
| 11499 |
# scale_to_zero_dst() - set dst operand exponent equal to zero # |
| 11500 |
# # |
| 11501 |
# INPUT *************************************************************** # |
| 11502 |
# a0 = pointer to extended precision source operand # |
| 11503 |
# a1 = pointer to extended precision destination operand # |
| 11504 |
# # |
| 11505 |
# OUTPUT ************************************************************** # |
| 11506 |
# fp0 = result # |
| 11507 |
# fp1 = EXOP (if exception occurred) # |
| 11508 |
# # |
| 11509 |
# ALGORITHM *********************************************************** # |
| 11510 |
# Handle NANs, infinities, and zeroes as special cases. Divide # |
| 11511 |
# norms into extended, single, and double precision. # |
| 11512 |
# Do subtraction after scaling exponents such that exception won't# |
| 11513 |
# occur. Then, check result exponent to see if exception would have # |
| 11514 |
# occurred. If so, return default result and maybe EXOP. Else, insert # |
| 11515 |
# the correct result exponent and return. Set FPSR bits as appropriate. # |
| 11516 |
# # |
| 11517 |
######################################################################### |
| 11518 |
|
| 11519 |
global fssub |
| 11520 |
fssub: |
| 11521 |
andi.b &0x30,%d0 # clear rnd prec |
| 11522 |
ori.b &s_mode*0x10,%d0 # insert sgl prec |
| 11523 |
bra.b fsub |
| 11524 |
|
| 11525 |
global fdsub |
| 11526 |
fdsub: |
| 11527 |
andi.b &0x30,%d0 # clear rnd prec |
| 11528 |
ori.b &d_mode*0x10,%d0 # insert dbl prec |
| 11529 |
|
| 11530 |
global fsub |
| 11531 |
fsub: |
| 11532 |
mov.l %d0,L_SCR3(%a6) # store rnd info |
| 11533 |
|
| 11534 |
clr.w %d1 |
| 11535 |
mov.b DTAG(%a6),%d1 |
| 11536 |
lsl.b &0x3,%d1 |
| 11537 |
or.b STAG(%a6),%d1 # combine src tags |
| 11538 |
|
| 11539 |
bne.w fsub_not_norm # optimize on non-norm input |
| 11540 |
|
| 11541 |
# |
| 11542 |
# SUB: norms and denorms |
| 11543 |
# |
| 11544 |
fsub_norm: |
| 11545 |
bsr.l addsub_scaler2 # scale exponents |
| 11546 |
|
| 11547 |
fsub_zero_entry: |
| 11548 |
fmovm.x FP_SCR1(%a6),&0x80 # load dst op |
| 11549 |
|
| 11550 |
fmov.l &0x0,%fpsr # clear FPSR |
| 11551 |
fmov.l L_SCR3(%a6),%fpcr # set FPCR |
| 11552 |
|
| 11553 |
fsub.x FP_SCR0(%a6),%fp0 # execute subtract |
| 11554 |
|
| 11555 |
fmov.l &0x0,%fpcr # clear FPCR |
| 11556 |
fmov.l %fpsr,%d1 # fetch INEX2, N, Z |
| 11557 |
|
| 11558 |
or.l %d1,USER_FPSR(%a6) # save exc and ccode bits |
| 11559 |
|
| 11560 |
fbeq.w fsub_zero_exit # if result zero, end now |
| 11561 |
|
| 11562 |
mov.l %d2,-(%sp) # save d2 |
| 11563 |
|
| 11564 |
fmovm.x &0x01,-(%sp) # save result to stack |
| 11565 |
|
| 11566 |
mov.w 2+L_SCR3(%a6),%d1 |
| 11567 |
lsr.b &0x6,%d1 |
| 11568 |
|
| 11569 |
mov.w (%sp),%d2 # fetch new exponent |
| 11570 |
andi.l &0x7fff,%d2 # strip sign |
| 11571 |
sub.l %d0,%d2 # add scale factor |
| 11572 |
|
| 11573 |
cmp.l %d2,(tbl_fsub_ovfl.b,%pc,%d1.w*4) # is it an overflow? |
| 11574 |
bge.b fsub_ovfl # yes |
| 11575 |
|
| 11576 |
cmp.l %d2,(tbl_fsub_unfl.b,%pc,%d1.w*4) # is it an underflow? |
| 11577 |
blt.w fsub_unfl # yes |
| 11578 |
beq.w fsub_may_unfl # maybe; go find out |
| 11579 |
|
| 11580 |
fsub_normal: |
| 11581 |
mov.w (%sp),%d1 |
| 11582 |
andi.w &0x8000,%d1 # keep sign |
| 11583 |
or.w %d2,%d1 # insert new exponent |
| 11584 |
mov.w %d1,(%sp) # insert new exponent |
| 11585 |
|
| 11586 |
fmovm.x (%sp)+,&0x80 # return result in fp0 |
| 11587 |
|
| 11588 |
mov.l (%sp)+,%d2 # restore d2 |
| 11589 |
rts |
| 11590 |
|
| 11591 |
fsub_zero_exit: |
| 11592 |
# fmov.s &0x00000000,%fp0 # return zero in fp0 |
| 11593 |
rts |
| 11594 |
|
| 11595 |
tbl_fsub_ovfl: |
| 11596 |
long 0x7fff # ext ovfl |
| 11597 |
long 0x407f # sgl ovfl |
| 11598 |
long 0x43ff # dbl ovfl |
| 11599 |
|
| 11600 |
tbl_fsub_unfl: |
| 11601 |
long 0x0000 # ext unfl |
| 11602 |
long 0x3f81 # sgl unfl |
| 11603 |
long 0x3c01 # dbl unfl |
| 11604 |
|
| 11605 |
fsub_ovfl: |
| 11606 |
or.l &ovfl_inx_mask,USER_FPSR(%a6) # set ovfl/aovfl/ainex |
| 11607 |
|
| 11608 |
mov.b FPCR_ENABLE(%a6),%d1 |
| 11609 |
andi.b &0x13,%d1 # is OVFL or INEX enabled? |
| 11610 |
bne.b fsub_ovfl_ena # yes |
| 11611 |
|
| 11612 |
add.l &0xc,%sp |
| 11613 |
fsub_ovfl_dis: |
| 11614 |
btst &neg_bit,FPSR_CC(%a6) # is result negative? |
| 11615 |
sne %d1 # set sign param accordingly |
| 11616 |
mov.l L_SCR3(%a6),%d0 # pass prec:rnd |
| 11617 |
bsr.l ovf_res # calculate default result |
| 11618 |
or.b %d0,FPSR_CC(%a6) # set INF,N if applicable |
| 11619 |
fmovm.x (%a0),&0x80 # return default result in fp0 |
| 11620 |
mov.l (%sp)+,%d2 # restore d2 |
| 11621 |
rts |
| 11622 |
|
| 11623 |
fsub_ovfl_ena: |
| 11624 |
mov.b L_SCR3(%a6),%d1 |
| 11625 |
andi.b &0xc0,%d1 # is precision extended? |
| 11626 |
bne.b fsub_ovfl_ena_sd # no |
| 11627 |
|
| 11628 |
fsub_ovfl_ena_cont: |
| 11629 |
mov.w (%sp),%d1 # fetch {sgn,exp} |
| 11630 |
andi.w &0x8000,%d1 # keep sign |
| 11631 |
subi.l &0x6000,%d2 # subtract new bias |
| 11632 |
andi.w &0x7fff,%d2 # clear top bit |
| 11633 |
or.w %d2,%d1 # concat sign,exp |
| 11634 |
mov.w %d1,(%sp) # insert new exponent |
| 11635 |
|
| 11636 |
fmovm.x (%sp)+,&0x40 # return EXOP in fp1 |
| 11637 |
bra.b fsub_ovfl_dis |
| 11638 |
|
| 11639 |
fsub_ovfl_ena_sd: |
| 11640 |
fmovm.x FP_SCR1(%a6),&0x80 # load dst op |
| 11641 |
|
| 11642 |
mov.l L_SCR3(%a6),%d1 |
| 11643 |
andi.b &0x30,%d1 # clear rnd prec |
| 11644 |
fmov.l %d1,%fpcr # set FPCR |
| 11645 |
|
| 11646 |
fsub.x FP_SCR0(%a6),%fp0 # execute subtract |
| 11647 |
|
| 11648 |
fmov.l &0x0,%fpcr # clear FPCR |
| 11649 |
|
| 11650 |
add.l &0xc,%sp |
| 11651 |
fmovm.x &0x01,-(%sp) |
| 11652 |
bra.b fsub_ovfl_ena_cont |
| 11653 |
|
| 11654 |
fsub_unfl: |
| 11655 |
bset &unfl_bit,FPSR_EXCEPT(%a6) # set unfl exc bit |
| 11656 |
|
| 11657 |
add.l &0xc,%sp |
| 11658 |
|
| 11659 |
fmovm.x FP_SCR1(%a6),&0x80 # load dst op |
| 11660 |
|
| 11661 |
fmov.l &rz_mode*0x10,%fpcr # set FPCR |
| 11662 |
fmov.l &0x0,%fpsr # clear FPSR |
| 11663 |
|
| 11664 |
fsub.x FP_SCR0(%a6),%fp0 # execute subtract |
| 11665 |
|
| 11666 |
fmov.l &0x0,%fpcr # clear FPCR |
| 11667 |
fmov.l %fpsr,%d1 # save status |
| 11668 |
|
| 11669 |
or.l %d1,USER_FPSR(%a6) |
| 11670 |
|
| 11671 |
mov.b FPCR_ENABLE(%a6),%d1 |
| 11672 |
andi.b &0x0b,%d1 # is UNFL or INEX enabled? |
| 11673 |
bne.b fsub_unfl_ena # yes |
| 11674 |
|
| 11675 |
fsub_unfl_dis: |
| 11676 |
fmovm.x &0x80,FP_SCR0(%a6) # store out result |
| 11677 |
|
| 11678 |
lea FP_SCR0(%a6),%a0 # pass: result addr |
| 11679 |
mov.l L_SCR3(%a6),%d1 # pass: rnd prec,mode |
| 11680 |
bsr.l unf_res # calculate default result |
| 11681 |
or.b %d0,FPSR_CC(%a6) # 'Z' may have been set |
| 11682 |
fmovm.x FP_SCR0(%a6),&0x80 # return default result in fp0 |
| 11683 |
mov.l (%sp)+,%d2 # restore d2 |
| 11684 |
rts |
| 11685 |
|
| 11686 |
fsub_unfl_ena: |
| 11687 |
fmovm.x FP_SCR1(%a6),&0x40 |
| 11688 |
|
| 11689 |
mov.l L_SCR3(%a6),%d1 |
| 11690 |
andi.b &0xc0,%d1 # is precision extended? |
| 11691 |
bne.b fsub_unfl_ena_sd # no |
| 11692 |
|
| 11693 |
fmov.l L_SCR3(%a6),%fpcr # set FPCR |
| 11694 |
|
| 11695 |
fsub_unfl_ena_cont: |
| 11696 |
fmov.l &0x0,%fpsr # clear FPSR |
| 11697 |
|
| 11698 |
fsub.x FP_SCR0(%a6),%fp1 # execute subtract |
| 11699 |
|
| 11700 |
fmov.l &0x0,%fpcr # clear FPCR |
| 11701 |
|
| 11702 |
fmovm.x &0x40,FP_SCR0(%a6) # store result to stack |
| 11703 |
mov.w FP_SCR0_EX(%a6),%d1 # fetch {sgn,exp} |
| 11704 |
mov.l %d1,%d2 # make a copy |
| 11705 |
andi.l &0x7fff,%d1 # strip sign |
| 11706 |
andi.w &0x8000,%d2 # keep old sign |
| 11707 |
sub.l %d0,%d1 # add scale factor |
| 11708 |
addi.l &0x6000,%d1 # subtract new bias |
| 11709 |
andi.w &0x7fff,%d1 # clear top bit |
| 11710 |
or.w %d2,%d1 # concat sgn,exp |
| 11711 |
mov.w %d1,FP_SCR0_EX(%a6) # insert new exponent |
| 11712 |
fmovm.x FP_SCR0(%a6),&0x40 # return EXOP in fp1 |
| 11713 |
bra.w fsub_unfl_dis |
| 11714 |
|
| 11715 |
fsub_unfl_ena_sd: |
| 11716 |
mov.l L_SCR3(%a6),%d1 |
| 11717 |
andi.b &0x30,%d1 # clear rnd prec |
| 11718 |
fmov.l %d1,%fpcr # set FPCR |
| 11719 |
|
| 11720 |
bra.b fsub_unfl_ena_cont |
| 11721 |
|
| 11722 |
# |
| 11723 |
# result is equal to the smallest normalized number in the selected precision |
| 11724 |
# if the precision is extended, this result could not have come from an |
| 11725 |
# underflow that rounded up. |
| 11726 |
# |
| 11727 |
fsub_may_unfl: |
| 11728 |
mov.l L_SCR3(%a6),%d1 |
| 11729 |
andi.b &0xc0,%d1 # fetch rnd prec |
| 11730 |
beq.w fsub_normal # yes; no underflow occurred |
| 11731 |
|
| 11732 |
mov.l 0x4(%sp),%d1 |
| 11733 |
cmpi.l %d1,&0x80000000 # is hi(man) = 0x80000000? |
| 11734 |
bne.w fsub_normal # no; no underflow occurred |
| 11735 |
|
| 11736 |
tst.l 0x8(%sp) # is lo(man) = 0x0? |
| 11737 |
bne.w fsub_normal # no; no underflow occurred |
| 11738 |
|
| 11739 |
btst &inex2_bit,FPSR_EXCEPT(%a6) # is INEX2 set? |
| 11740 |
beq.w fsub_normal # no; no underflow occurred |
| 11741 |
|
| 11742 |
# |
| 11743 |
# ok, so now the result has a exponent equal to the smallest normalized |
| 11744 |
# exponent for the selected precision. also, the mantissa is equal to |
| 11745 |
# 0x8000000000000000 and this mantissa is the result of rounding non-zero |
| 11746 |
# g,r,s. |
| 11747 |
# now, we must determine whether the pre-rounded result was an underflow |
| 11748 |
# rounded "up" or a normalized number rounded "down". |
| 11749 |
# so, we do this be re-executing the add using RZ as the rounding mode and |
| 11750 |
# seeing if the new result is smaller or equal to the current result. |
| 11751 |
# |
| 11752 |
fmovm.x FP_SCR1(%a6),&0x40 # load dst op into fp1 |
| 11753 |
|
| 11754 |
mov.l L_SCR3(%a6),%d1 |
| 11755 |
andi.b &0xc0,%d1 # keep rnd prec |
| 11756 |
ori.b &rz_mode*0x10,%d1 # insert rnd mode |
| 11757 |
fmov.l %d1,%fpcr # set FPCR |
| 11758 |
fmov.l &0x0,%fpsr # clear FPSR |
| 11759 |
|
| 11760 |
fsub.x FP_SCR0(%a6),%fp1 # execute subtract |
| 11761 |
|
| 11762 |
fmov.l &0x0,%fpcr # clear FPCR |
| 11763 |
|
| 11764 |
fabs.x %fp0 # compare absolute values |
| 11765 |
fabs.x %fp1 |
| 11766 |
fcmp.x %fp0,%fp1 # is first result > second? |
| 11767 |
|
| 11768 |
fbgt.w fsub_unfl # yes; it's an underflow |
| 11769 |
bra.w fsub_normal # no; it's not an underflow |
| 11770 |
|
| 11771 |
########################################################################## |
| 11772 |
|
| 11773 |
# |
| 11774 |
# Sub: inputs are not both normalized; what are they? |
| 11775 |
# |
| 11776 |
fsub_not_norm: |
| 11777 |
mov.w (tbl_fsub_op.b,%pc,%d1.w*2),%d1 |
| 11778 |
jmp (tbl_fsub_op.b,%pc,%d1.w*1) |
| 11779 |
|
| 11780 |
swbeg &48 |
| 11781 |
tbl_fsub_op: |
| 11782 |
short fsub_norm - tbl_fsub_op # NORM - NORM |
| 11783 |
short fsub_zero_src - tbl_fsub_op # NORM - ZERO |
| 11784 |
short fsub_inf_src - tbl_fsub_op # NORM - INF |
| 11785 |
short fsub_res_qnan - tbl_fsub_op # NORM - QNAN |
| 11786 |
short fsub_norm - tbl_fsub_op # NORM - DENORM |
| 11787 |
short fsub_res_snan - tbl_fsub_op # NORM - SNAN |
| 11788 |
short tbl_fsub_op - tbl_fsub_op # |
| 11789 |
short tbl_fsub_op - tbl_fsub_op # |
| 11790 |
|
| 11791 |
short fsub_zero_dst - tbl_fsub_op # ZERO - NORM |
| 11792 |
short fsub_zero_2 - tbl_fsub_op # ZERO - ZERO |
| 11793 |
short fsub_inf_src - tbl_fsub_op # ZERO - INF |
| 11794 |
short fsub_res_qnan - tbl_fsub_op # NORM - QNAN |
| 11795 |
short fsub_zero_dst - tbl_fsub_op # ZERO - DENORM |
| 11796 |
short fsub_res_snan - tbl_fsub_op # NORM - SNAN |
| 11797 |
short tbl_fsub_op - tbl_fsub_op # |
| 11798 |
short tbl_fsub_op - tbl_fsub_op # |
| 11799 |
|
| 11800 |
short fsub_inf_dst - tbl_fsub_op # INF - NORM |
| 11801 |
short fsub_inf_dst - tbl_fsub_op # INF - ZERO |
| 11802 |
short fsub_inf_2 - tbl_fsub_op # INF - INF |
| 11803 |
short fsub_res_qnan - tbl_fsub_op # NORM - QNAN |
| 11804 |
short fsub_inf_dst - tbl_fsub_op # INF - DENORM |
| 11805 |
short fsub_res_snan - tbl_fsub_op # NORM - SNAN |
| 11806 |
short tbl_fsub_op - tbl_fsub_op # |
| 11807 |
short tbl_fsub_op - tbl_fsub_op # |
| 11808 |
|
| 11809 |
short fsub_res_qnan - tbl_fsub_op # QNAN - NORM |
| 11810 |
short fsub_res_qnan - tbl_fsub_op # QNAN - ZERO |
| 11811 |
short fsub_res_qnan - tbl_fsub_op # QNAN - INF |
| 11812 |
short fsub_res_qnan - tbl_fsub_op # QNAN - QNAN |
| 11813 |
short fsub_res_qnan - tbl_fsub_op # QNAN - DENORM |
| 11814 |
short fsub_res_snan - tbl_fsub_op # QNAN - SNAN |
| 11815 |
short tbl_fsub_op - tbl_fsub_op # |
| 11816 |
short tbl_fsub_op - tbl_fsub_op # |
| 11817 |
|
| 11818 |
short fsub_norm - tbl_fsub_op # DENORM - NORM |
| 11819 |
short fsub_zero_src - tbl_fsub_op # DENORM - ZERO |
| 11820 |
short fsub_inf_src - tbl_fsub_op # DENORM - INF |
| 11821 |
short fsub_res_qnan - tbl_fsub_op # NORM - QNAN |
| 11822 |
short fsub_norm - tbl_fsub_op # DENORM - DENORM |
| 11823 |
short fsub_res_snan - tbl_fsub_op # NORM - SNAN |
| 11824 |
short tbl_fsub_op - tbl_fsub_op # |
| 11825 |
short tbl_fsub_op - tbl_fsub_op # |
| 11826 |
|
| 11827 |
short fsub_res_snan - tbl_fsub_op # SNAN - NORM |
| 11828 |
short fsub_res_snan - tbl_fsub_op # SNAN - ZERO |
| 11829 |
short fsub_res_snan - tbl_fsub_op # SNAN - INF |
| 11830 |
short fsub_res_snan - tbl_fsub_op # SNAN - QNAN |
| 11831 |
short fsub_res_snan - tbl_fsub_op # SNAN - DENORM |
| 11832 |
short fsub_res_snan - tbl_fsub_op # SNAN - SNAN |
| 11833 |
short tbl_fsub_op - tbl_fsub_op # |
| 11834 |
short tbl_fsub_op - tbl_fsub_op # |
| 11835 |
|
| 11836 |
fsub_res_qnan: |
| 11837 |
bra.l res_qnan |
| 11838 |
fsub_res_snan: |
| 11839 |
bra.l res_snan |
| 11840 |
|
| 11841 |
# |
| 11842 |
# both operands are ZEROes |
| 11843 |
# |
| 11844 |
fsub_zero_2: |
| 11845 |
mov.b SRC_EX(%a0),%d0 |
| 11846 |
mov.b DST_EX(%a1),%d1 |
| 11847 |
eor.b %d1,%d0 |
| 11848 |
bpl.b fsub_zero_2_chk_rm |
| 11849 |
|
| 11850 |
# the signs are opposite, so, return a ZERO w/ the sign of the dst ZERO |
| 11851 |
tst.b %d0 # is dst negative? |
| 11852 |
bmi.b fsub_zero_2_rm # yes |
| 11853 |
fmov.s &0x00000000,%fp0 # no; return +ZERO |
| 11854 |
mov.b &z_bmask,FPSR_CC(%a6) # set Z |
| 11855 |
rts |
| 11856 |
|
| 11857 |
# |
| 11858 |
# the ZEROes have the same signs: |
| 11859 |
# - Therefore, we return +ZERO if the rounding mode is RN,RZ, or RP |
| 11860 |
# - -ZERO is returned in the case of RM. |
| 11861 |
# |
| 11862 |
fsub_zero_2_chk_rm: |
| 11863 |
mov.b 3+L_SCR3(%a6),%d1 |
| 11864 |
andi.b &0x30,%d1 # extract rnd mode |
| 11865 |
cmpi.b %d1,&rm_mode*0x10 # is rnd mode = RM? |
| 11866 |
beq.b fsub_zero_2_rm # yes |
| 11867 |
fmov.s &0x00000000,%fp0 # no; return +ZERO |
| 11868 |
mov.b &z_bmask,FPSR_CC(%a6) # set Z |
| 11869 |
rts |
| 11870 |
|
| 11871 |
fsub_zero_2_rm: |
| 11872 |
fmov.s &0x80000000,%fp0 # return -ZERO |
| 11873 |
mov.b &z_bmask+neg_bmask,FPSR_CC(%a6) # set Z/NEG |
| 11874 |
rts |
| 11875 |
|
| 11876 |
# |
| 11877 |
# one operand is a ZERO and the other is a DENORM or a NORM. |
| 11878 |
# scale the DENORM or NORM and jump to the regular fsub routine. |
| 11879 |
# |
| 11880 |
fsub_zero_dst: |
| 11881 |
mov.w SRC_EX(%a0),FP_SCR0_EX(%a6) |
| 11882 |
mov.l SRC_HI(%a0),FP_SCR0_HI(%a6) |
| 11883 |
mov.l SRC_LO(%a0),FP_SCR0_LO(%a6) |
| 11884 |
bsr.l scale_to_zero_src # scale the operand |
| 11885 |
clr.w FP_SCR1_EX(%a6) |
| 11886 |
clr.l FP_SCR1_HI(%a6) |
| 11887 |
clr.l FP_SCR1_LO(%a6) |
| 11888 |
bra.w fsub_zero_entry # go execute fsub |
| 11889 |
|
| 11890 |
fsub_zero_src: |
| 11891 |
mov.w DST_EX(%a1),FP_SCR1_EX(%a6) |
| 11892 |
mov.l DST_HI(%a1),FP_SCR1_HI(%a6) |
| 11893 |
mov.l DST_LO(%a1),FP_SCR1_LO(%a6) |
| 11894 |
bsr.l scale_to_zero_dst # scale the operand |
| 11895 |
clr.w FP_SCR0_EX(%a6) |
| 11896 |
clr.l FP_SCR0_HI(%a6) |
| 11897 |
clr.l FP_SCR0_LO(%a6) |
| 11898 |
bra.w fsub_zero_entry # go execute fsub |
| 11899 |
|
| 11900 |
# |
| 11901 |
# both operands are INFs. an OPERR will result if the INFs have the |
| 11902 |
# same signs. else, |
| 11903 |
# |
| 11904 |
fsub_inf_2: |
| 11905 |
mov.b SRC_EX(%a0),%d0 # exclusive or the signs |
| 11906 |
mov.b DST_EX(%a1),%d1 |
| 11907 |
eor.b %d1,%d0 |
| 11908 |
bpl.l res_operr # weed out (-INF)+(+INF) |
| 11909 |
|
| 11910 |
# ok, so it's not an OPERR. but we do have to remember to return |
| 11911 |
# the src INF since that's where the 881/882 gets the j-bit. |
| 11912 |
|
| 11913 |
fsub_inf_src: |
| 11914 |
fmovm.x SRC(%a0),&0x80 # return src INF |
| 11915 |
fneg.x %fp0 # invert sign |
| 11916 |
fbge.w fsub_inf_done # sign is now positive |
| 11917 |
mov.b &neg_bmask+inf_bmask,FPSR_CC(%a6) # set INF/NEG |
| 11918 |
rts |
| 11919 |
|
| 11920 |
fsub_inf_dst: |
| 11921 |
fmovm.x DST(%a1),&0x80 # return dst INF |
| 11922 |
tst.b DST_EX(%a1) # is INF negative? |
| 11923 |
bpl.b fsub_inf_done # no |
| 11924 |
mov.b &neg_bmask+inf_bmask,FPSR_CC(%a6) # set INF/NEG |
| 11925 |
rts |
| 11926 |
|
| 11927 |
fsub_inf_done: |
| 11928 |
mov.b &inf_bmask,FPSR_CC(%a6) # set INF |
| 11929 |
rts |
| 11930 |
|
| 11931 |
######################################################################### |
| 11932 |
# XDEF **************************************************************** # |
| 11933 |
# fsqrt(): emulates the fsqrt instruction # |
| 11934 |
# fssqrt(): emulates the fssqrt instruction # |
| 11935 |
# fdsqrt(): emulates the fdsqrt instruction # |
| 11936 |
# # |
| 11937 |
# XREF **************************************************************** # |
| 11938 |
# scale_sqrt() - scale the source operand # |
| 11939 |
# unf_res() - return default underflow result # |
| 11940 |
# ovf_res() - return default overflow result # |
| 11941 |
# res_qnan_1op() - return QNAN result # |
| 11942 |
# res_snan_1op() - return SNAN result # |
| 11943 |
# # |
| 11944 |
# INPUT *************************************************************** # |
| 11945 |
# a0 = pointer to extended precision source operand # |
| 11946 |
# d0 rnd prec,mode # |
| 11947 |
# # |
| 11948 |
# OUTPUT ************************************************************** # |
| 11949 |
# fp0 = result # |
| 11950 |
# fp1 = EXOP (if exception occurred) # |
| 11951 |
# # |
| 11952 |
# ALGORITHM *********************************************************** # |
| 11953 |
# Handle NANs, infinities, and zeroes as special cases. Divide # |
| 11954 |
# norms/denorms into ext/sgl/dbl precision. # |
| 11955 |
# For norms/denorms, scale the exponents such that a sqrt # |
| 11956 |
# instruction won't cause an exception. Use the regular fsqrt to # |
| 11957 |
# compute a result. Check if the regular operands would have taken # |
| 11958 |
# an exception. If so, return the default overflow/underflow result # |
| 11959 |
# and return the EXOP if exceptions are enabled. Else, scale the # |
| 11960 |
# result operand to the proper exponent. # |
| 11961 |
# # |
| 11962 |
######################################################################### |
| 11963 |
|
| 11964 |
global fssqrt |
| 11965 |
fssqrt: |
| 11966 |
andi.b &0x30,%d0 # clear rnd prec |
| 11967 |
ori.b &s_mode*0x10,%d0 # insert sgl precision |
| 11968 |
bra.b fsqrt |
| 11969 |
|
| 11970 |
global fdsqrt |
| 11971 |
fdsqrt: |
| 11972 |
andi.b &0x30,%d0 # clear rnd prec |
| 11973 |
ori.b &d_mode*0x10,%d0 # insert dbl precision |
| 11974 |
|
| 11975 |
global fsqrt |
| 11976 |
fsqrt: |
| 11977 |
mov.l %d0,L_SCR3(%a6) # store rnd info |
| 11978 |
clr.w %d1 |
| 11979 |
mov.b STAG(%a6),%d1 |
| 11980 |
bne.w fsqrt_not_norm # optimize on non-norm input |
| 11981 |
|
| 11982 |
# |
| 11983 |
# SQUARE ROOT: norms and denorms ONLY! |
| 11984 |
# |
| 11985 |
fsqrt_norm: |
| 11986 |
tst.b SRC_EX(%a0) # is operand negative? |
| 11987 |
bmi.l res_operr # yes |
| 11988 |
|
| 11989 |
andi.b &0xc0,%d0 # is precision extended? |
| 11990 |
bne.b fsqrt_not_ext # no; go handle sgl or dbl |
| 11991 |
|
| 11992 |
fmov.l L_SCR3(%a6),%fpcr # set FPCR |
| 11993 |
fmov.l &0x0,%fpsr # clear FPSR |
| 11994 |
|
| 11995 |
fsqrt.x (%a0),%fp0 # execute square root |
| 11996 |
|
| 11997 |
fmov.l %fpsr,%d1 |
| 11998 |
or.l %d1,USER_FPSR(%a6) # set N,INEX |
| 11999 |
|
| 12000 |
rts |
| 12001 |
|
| 12002 |
fsqrt_denorm: |
| 12003 |
tst.b SRC_EX(%a0) # is operand negative? |
| 12004 |
bmi.l res_operr # yes |
| 12005 |
|
| 12006 |
andi.b &0xc0,%d0 # is precision extended? |
| 12007 |
bne.b fsqrt_not_ext # no; go handle sgl or dbl |
| 12008 |
|
| 12009 |
mov.w SRC_EX(%a0),FP_SCR0_EX(%a6) |
| 12010 |
mov.l SRC_HI(%a0),FP_SCR0_HI(%a6) |
| 12011 |
mov.l SRC_LO(%a0),FP_SCR0_LO(%a6) |
| 12012 |
|
| 12013 |
bsr.l scale_sqrt # calculate scale factor |
| 12014 |
|
| 12015 |
bra.w fsqrt_sd_normal |
| 12016 |
|
| 12017 |
# |
| 12018 |
# operand is either single or double |
| 12019 |
# |
| 12020 |
fsqrt_not_ext: |
| 12021 |
cmpi.b %d0,&s_mode*0x10 # separate sgl/dbl prec |
| 12022 |
bne.w fsqrt_dbl |
| 12023 |
|
| 12024 |
# |
| 12025 |
# operand is to be rounded to single precision |
| 12026 |
# |
| 12027 |
fsqrt_sgl: |
| 12028 |
mov.w SRC_EX(%a0),FP_SCR0_EX(%a6) |
| 12029 |
mov.l SRC_HI(%a0),FP_SCR0_HI(%a6) |
| 12030 |
mov.l SRC_LO(%a0),FP_SCR0_LO(%a6) |
| 12031 |
|
| 12032 |
bsr.l scale_sqrt # calculate scale factor |
| 12033 |
|
| 12034 |
cmpi.l %d0,&0x3fff-0x3f81 # will move in underflow? |
| 12035 |
beq.w fsqrt_sd_may_unfl |
| 12036 |
bgt.w fsqrt_sd_unfl # yes; go handle underflow |
| 12037 |
cmpi.l %d0,&0x3fff-0x407f # will move in overflow? |
| 12038 |
beq.w fsqrt_sd_may_ovfl # maybe; go check |
| 12039 |
blt.w fsqrt_sd_ovfl # yes; go handle overflow |
| 12040 |
|
| 12041 |
# |
| 12042 |
# operand will NOT overflow or underflow when moved in to the fp reg file |
| 12043 |
# |
| 12044 |
fsqrt_sd_normal: |
| 12045 |
fmov.l &0x0,%fpsr # clear FPSR |
| 12046 |
fmov.l L_SCR3(%a6),%fpcr # set FPCR |
| 12047 |
|
| 12048 |
fsqrt.x FP_SCR0(%a6),%fp0 # perform absolute |
| 12049 |
|
| 12050 |
fmov.l %fpsr,%d1 # save FPSR |
| 12051 |
fmov.l &0x0,%fpcr # clear FPCR |
| 12052 |
|
| 12053 |
or.l %d1,USER_FPSR(%a6) # save INEX2,N |
| 12054 |
|
| 12055 |
fsqrt_sd_normal_exit: |
| 12056 |
mov.l %d2,-(%sp) # save d2 |
| 12057 |
fmovm.x &0x80,FP_SCR0(%a6) # store out result |
| 12058 |
mov.w FP_SCR0_EX(%a6),%d1 # load sgn,exp |
| 12059 |
mov.l %d1,%d2 # make a copy |
| 12060 |
andi.l &0x7fff,%d1 # strip sign |
| 12061 |
sub.l %d0,%d1 # add scale factor |
| 12062 |
andi.w &0x8000,%d2 # keep old sign |
| 12063 |
or.w %d1,%d2 # concat old sign,new exp |
| 12064 |
mov.w %d2,FP_SCR0_EX(%a6) # insert new exponent |
| 12065 |
mov.l (%sp)+,%d2 # restore d2 |
| 12066 |
fmovm.x FP_SCR0(%a6),&0x80 # return result in fp0 |
| 12067 |
rts |
| 12068 |
|
| 12069 |
# |
| 12070 |
# operand is to be rounded to double precision |
| 12071 |
# |
| 12072 |
fsqrt_dbl: |
| 12073 |
mov.w SRC_EX(%a0),FP_SCR0_EX(%a6) |
| 12074 |
mov.l SRC_HI(%a0),FP_SCR0_HI(%a6) |
| 12075 |
mov.l SRC_LO(%a0),FP_SCR0_LO(%a6) |
| 12076 |
|
| 12077 |
bsr.l scale_sqrt # calculate scale factor |
| 12078 |
|
| 12079 |
cmpi.l %d0,&0x3fff-0x3c01 # will move in underflow? |
| 12080 |
beq.w fsqrt_sd_may_unfl |
| 12081 |
bgt.b fsqrt_sd_unfl # yes; go handle underflow |
| 12082 |
cmpi.l %d0,&0x3fff-0x43ff # will move in overflow? |
| 12083 |
beq.w fsqrt_sd_may_ovfl # maybe; go check |
| 12084 |
blt.w fsqrt_sd_ovfl # yes; go handle overflow |
| 12085 |
bra.w fsqrt_sd_normal # no; ho handle normalized op |
| 12086 |
|
| 12087 |
# we're on the line here and the distinguising characteristic is whether |
| 12088 |
# the exponent is 3fff or 3ffe. if it's 3ffe, then it's a safe number |
| 12089 |
# elsewise fall through to underflow. |
| 12090 |
fsqrt_sd_may_unfl: |
| 12091 |
btst &0x0,1+FP_SCR0_EX(%a6) # is exponent 0x3fff? |
| 12092 |
bne.w fsqrt_sd_normal # yes, so no underflow |
| 12093 |
|
| 12094 |
# |
| 12095 |
# operand WILL underflow when moved in to the fp register file |
| 12096 |
# |
| 12097 |
fsqrt_sd_unfl: |
| 12098 |
bset &unfl_bit,FPSR_EXCEPT(%a6) # set unfl exc bit |
| 12099 |
|
| 12100 |
fmov.l &rz_mode*0x10,%fpcr # set FPCR |
| 12101 |
fmov.l &0x0,%fpsr # clear FPSR |
| 12102 |
|
| 12103 |
fsqrt.x FP_SCR0(%a6),%fp0 # execute square root |
| 12104 |
|
| 12105 |
fmov.l %fpsr,%d1 # save status |
| 12106 |
fmov.l &0x0,%fpcr # clear FPCR |
| 12107 |
|
| 12108 |
or.l %d1,USER_FPSR(%a6) # save INEX2,N |
| 12109 |
|
| 12110 |
# if underflow or inexact is enabled, go calculate EXOP first. |
| 12111 |
mov.b FPCR_ENABLE(%a6),%d1 |
| 12112 |
andi.b &0x0b,%d1 # is UNFL or INEX enabled? |
| 12113 |
bne.b fsqrt_sd_unfl_ena # yes |
| 12114 |
|
| 12115 |
fsqrt_sd_unfl_dis: |
| 12116 |
fmovm.x &0x80,FP_SCR0(%a6) # store out result |
| 12117 |
|
| 12118 |
lea FP_SCR0(%a6),%a0 # pass: result addr |
| 12119 |
mov.l L_SCR3(%a6),%d1 # pass: rnd prec,mode |
| 12120 |
bsr.l unf_res # calculate default result |
| 12121 |
or.b %d0,FPSR_CC(%a6) # set possible 'Z' ccode |
| 12122 |
fmovm.x FP_SCR0(%a6),&0x80 # return default result in fp0 |
| 12123 |
rts |
| 12124 |
|
| 12125 |
# |
| 12126 |
# operand will underflow AND underflow is enabled. |
| 12127 |
# Therefore, we must return the result rounded to extended precision. |
| 12128 |
# |
| 12129 |
fsqrt_sd_unfl_ena: |
| 12130 |
mov.l FP_SCR0_HI(%a6),FP_SCR1_HI(%a6) |
| 12131 |
mov.l FP_SCR0_LO(%a6),FP_SCR1_LO(%a6) |
| 12132 |
mov.w FP_SCR0_EX(%a6),%d1 # load current exponent |
| 12133 |
|
| 12134 |
mov.l %d2,-(%sp) # save d2 |
| 12135 |
mov.l %d1,%d2 # make a copy |
| 12136 |
andi.l &0x7fff,%d1 # strip sign |
| 12137 |
andi.w &0x8000,%d2 # keep old sign |
| 12138 |
sub.l %d0,%d1 # subtract scale factor |
| 12139 |
addi.l &0x6000,%d1 # add new bias |
| 12140 |
andi.w &0x7fff,%d1 |
| 12141 |
or.w %d2,%d1 # concat new sign,new exp |
| 12142 |
mov.w %d1,FP_SCR1_EX(%a6) # insert new exp |
| 12143 |
fmovm.x FP_SCR1(%a6),&0x40 # return EXOP in fp1 |
| 12144 |
mov.l (%sp)+,%d2 # restore d2 |
| 12145 |
bra.b fsqrt_sd_unfl_dis |
| 12146 |
|
| 12147 |
# |
| 12148 |
# operand WILL overflow. |
| 12149 |
# |
| 12150 |
fsqrt_sd_ovfl: |
| 12151 |
fmov.l &0x0,%fpsr # clear FPSR |
| 12152 |
fmov.l L_SCR3(%a6),%fpcr # set FPCR |
| 12153 |
|
| 12154 |
fsqrt.x FP_SCR0(%a6),%fp0 # perform square root |
| 12155 |
|
| 12156 |
fmov.l &0x0,%fpcr # clear FPCR |
| 12157 |
fmov.l %fpsr,%d1 # save FPSR |
| 12158 |
|
| 12159 |
or.l %d1,USER_FPSR(%a6) # save INEX2,N |
| 12160 |
|
| 12161 |
fsqrt_sd_ovfl_tst: |
| 12162 |
or.l &ovfl_inx_mask,USER_FPSR(%a6) # set ovfl/aovfl/ainex |
| 12163 |
|
| 12164 |
mov.b FPCR_ENABLE(%a6),%d1 |
| 12165 |
andi.b &0x13,%d1 # is OVFL or INEX enabled? |
| 12166 |
bne.b fsqrt_sd_ovfl_ena # yes |
| 12167 |
|
| 12168 |
# |
| 12169 |
# OVFL is not enabled; therefore, we must create the default result by |
| 12170 |
# calling ovf_res(). |
| 12171 |
# |
| 12172 |
fsqrt_sd_ovfl_dis: |
| 12173 |
btst &neg_bit,FPSR_CC(%a6) # is result negative? |
| 12174 |
sne %d1 # set sign param accordingly |
| 12175 |
mov.l L_SCR3(%a6),%d0 # pass: prec,mode |
| 12176 |
bsr.l ovf_res # calculate default result |
| 12177 |
or.b %d0,FPSR_CC(%a6) # set INF,N if applicable |
| 12178 |
fmovm.x (%a0),&0x80 # return default result in fp0 |
| 12179 |
rts |
| 12180 |
|
| 12181 |
# |
| 12182 |
# OVFL is enabled. |
| 12183 |
# the INEX2 bit has already been updated by the round to the correct precision. |
| 12184 |
# now, round to extended(and don't alter the FPSR). |
| 12185 |
# |
| 12186 |
fsqrt_sd_ovfl_ena: |
| 12187 |
mov.l %d2,-(%sp) # save d2 |
| 12188 |
mov.w FP_SCR0_EX(%a6),%d1 # fetch {sgn,exp} |
| 12189 |
mov.l %d1,%d2 # make a copy |
| 12190 |
andi.l &0x7fff,%d1 # strip sign |
| 12191 |
andi.w &0x8000,%d2 # keep old sign |
| 12192 |
sub.l %d0,%d1 # add scale factor |
| 12193 |
subi.l &0x6000,%d1 # subtract bias |
| 12194 |
andi.w &0x7fff,%d1 |
| 12195 |
or.w %d2,%d1 # concat sign,exp |
| 12196 |
mov.w %d1,FP_SCR0_EX(%a6) # insert new exponent |
| 12197 |
fmovm.x FP_SCR0(%a6),&0x40 # return EXOP in fp1 |
| 12198 |
mov.l (%sp)+,%d2 # restore d2 |
| 12199 |
bra.b fsqrt_sd_ovfl_dis |
| 12200 |
|
| 12201 |
# |
| 12202 |
# the move in MAY underflow. so... |
| 12203 |
# |
| 12204 |
fsqrt_sd_may_ovfl: |
| 12205 |
btst &0x0,1+FP_SCR0_EX(%a6) # is exponent 0x3fff? |
| 12206 |
bne.w fsqrt_sd_ovfl # yes, so overflow |
| 12207 |
|
| 12208 |
fmov.l &0x0,%fpsr # clear FPSR |
| 12209 |
fmov.l L_SCR3(%a6),%fpcr # set FPCR |
| 12210 |
|
| 12211 |
fsqrt.x FP_SCR0(%a6),%fp0 # perform absolute |
| 12212 |
|
| 12213 |
fmov.l %fpsr,%d1 # save status |
| 12214 |
fmov.l &0x0,%fpcr # clear FPCR |
| 12215 |
|
| 12216 |
or.l %d1,USER_FPSR(%a6) # save INEX2,N |
| 12217 |
|
| 12218 |
fmov.x %fp0,%fp1 # make a copy of result |
| 12219 |
fcmp.b %fp1,&0x1 # is |result| >= 1.b? |
| 12220 |
fbge.w fsqrt_sd_ovfl_tst # yes; overflow has occurred |
| 12221 |
|
| 12222 |
# no, it didn't overflow; we have correct result |
| 12223 |
bra.w fsqrt_sd_normal_exit |
| 12224 |
|
| 12225 |
########################################################################## |
| 12226 |
|
| 12227 |
# |
| 12228 |
# input is not normalized; what is it? |
| 12229 |
# |
| 12230 |
fsqrt_not_norm: |
| 12231 |
cmpi.b %d1,&DENORM # weed out DENORM |
| 12232 |
beq.w fsqrt_denorm |
| 12233 |
cmpi.b %d1,&ZERO # weed out ZERO |
| 12234 |
beq.b fsqrt_zero |
| 12235 |
cmpi.b %d1,&INF # weed out INF |
| 12236 |
beq.b fsqrt_inf |
| 12237 |
cmpi.b %d1,&SNAN # weed out SNAN |
| 12238 |
beq.l res_snan_1op |
| 12239 |
bra.l res_qnan_1op |
| 12240 |
|
| 12241 |
# |
| 12242 |
# fsqrt(+0) = +0 |
| 12243 |
# fsqrt(-0) = -0 |
| 12244 |
# fsqrt(+INF) = +INF |
| 12245 |
# fsqrt(-INF) = OPERR |
| 12246 |
# |
| 12247 |
fsqrt_zero: |
| 12248 |
tst.b SRC_EX(%a0) # is ZERO positive or negative? |
| 12249 |
bmi.b fsqrt_zero_m # negative |
| 12250 |
fsqrt_zero_p: |
| 12251 |
fmov.s &0x00000000,%fp0 # return +ZERO |
| 12252 |
mov.b &z_bmask,FPSR_CC(%a6) # set 'Z' ccode bit |
| 12253 |
rts |
| 12254 |
fsqrt_zero_m: |
| 12255 |
fmov.s &0x80000000,%fp0 # return -ZERO |
| 12256 |
mov.b &z_bmask+neg_bmask,FPSR_CC(%a6) # set 'Z','N' ccode bits |
| 12257 |
rts |
| 12258 |
|
| 12259 |
fsqrt_inf: |
| 12260 |
tst.b SRC_EX(%a0) # is INF positive or negative? |
| 12261 |
bmi.l res_operr # negative |
| 12262 |
fsqrt_inf_p: |
| 12263 |
fmovm.x SRC(%a0),&0x80 # return +INF in fp0 |
| 12264 |
mov.b &inf_bmask,FPSR_CC(%a6) # set 'I' ccode bit |
| 12265 |
rts |
| 12266 |
|
| 12267 |
######################################################################### |
| 12268 |
# XDEF **************************************************************** # |
| 12269 |
# fetch_dreg(): fetch register according to index in d1 # |
| 12270 |
# # |
| 12271 |
# XREF **************************************************************** # |
| 12272 |
# None # |
| 12273 |
# # |
| 12274 |
# INPUT *************************************************************** # |
| 12275 |
# d1 = index of register to fetch from # |
| 12276 |
# # |
| 12277 |
# OUTPUT ************************************************************** # |
| 12278 |
# d0 = value of register fetched # |
| 12279 |
# # |
| 12280 |
# ALGORITHM *********************************************************** # |
| 12281 |
# According to the index value in d1 which can range from zero # |
| 12282 |
# to fifteen, load the corresponding register file value (where # |
| 12283 |
# address register indexes start at 8). D0/D1/A0/A1/A6/A7 are on the # |
| 12284 |
# stack. The rest should still be in their original places. # |
| 12285 |
# # |
| 12286 |
######################################################################### |
| 12287 |
|
| 12288 |
# this routine leaves d1 intact for subsequent store_dreg calls. |
| 12289 |
global fetch_dreg |
| 12290 |
fetch_dreg: |
| 12291 |
mov.w (tbl_fdreg.b,%pc,%d1.w*2),%d0 |
| 12292 |
jmp (tbl_fdreg.b,%pc,%d0.w*1) |
| 12293 |
|
| 12294 |
tbl_fdreg: |
| 12295 |
short fdreg0 - tbl_fdreg |
| 12296 |
short fdreg1 - tbl_fdreg |
| 12297 |
short fdreg2 - tbl_fdreg |
| 12298 |
short fdreg3 - tbl_fdreg |
| 12299 |
short fdreg4 - tbl_fdreg |
| 12300 |
short fdreg5 - tbl_fdreg |
| 12301 |
short fdreg6 - tbl_fdreg |
| 12302 |
short fdreg7 - tbl_fdreg |
| 12303 |
short fdreg8 - tbl_fdreg |
| 12304 |
short fdreg9 - tbl_fdreg |
| 12305 |
short fdrega - tbl_fdreg |
| 12306 |
short fdregb - tbl_fdreg |
| 12307 |
short fdregc - tbl_fdreg |
| 12308 |
short fdregd - tbl_fdreg |
| 12309 |
short fdrege - tbl_fdreg |
| 12310 |
short fdregf - tbl_fdreg |
| 12311 |
|
| 12312 |
fdreg0: |
| 12313 |
mov.l EXC_DREGS+0x0(%a6),%d0 |
| 12314 |
rts |
| 12315 |
fdreg1: |
| 12316 |
mov.l EXC_DREGS+0x4(%a6),%d0 |
| 12317 |
rts |
| 12318 |
fdreg2: |
| 12319 |
mov.l %d2,%d0 |
| 12320 |
rts |
| 12321 |
fdreg3: |
| 12322 |
mov.l %d3,%d0 |
| 12323 |
rts |
| 12324 |
fdreg4: |
| 12325 |
mov.l %d4,%d0 |
| 12326 |
rts |
| 12327 |
fdreg5: |
| 12328 |
mov.l %d5,%d0 |
| 12329 |
rts |
| 12330 |
fdreg6: |
| 12331 |
mov.l %d6,%d0 |
| 12332 |
rts |
| 12333 |
fdreg7: |
| 12334 |
mov.l %d7,%d0 |
| 12335 |
rts |
| 12336 |
fdreg8: |
| 12337 |
mov.l EXC_DREGS+0x8(%a6),%d0 |
| 12338 |
rts |
| 12339 |
fdreg9: |
| 12340 |
mov.l EXC_DREGS+0xc(%a6),%d0 |
| 12341 |
rts |
| 12342 |
fdrega: |
| 12343 |
mov.l %a2,%d0 |
| 12344 |
rts |
| 12345 |
fdregb: |
| 12346 |
mov.l %a3,%d0 |
| 12347 |
rts |
| 12348 |
fdregc: |
| 12349 |
mov.l %a4,%d0 |
| 12350 |
rts |
| 12351 |
fdregd: |
| 12352 |
mov.l %a5,%d0 |
| 12353 |
rts |
| 12354 |
fdrege: |
| 12355 |
mov.l (%a6),%d0 |
| 12356 |
rts |
| 12357 |
fdregf: |
| 12358 |
mov.l EXC_A7(%a6),%d0 |
| 12359 |
rts |
| 12360 |
|
| 12361 |
######################################################################### |
| 12362 |
# XDEF **************************************************************** # |
| 12363 |
# store_dreg_l(): store longword to data register specified by d1 # |
| 12364 |
# # |
| 12365 |
# XREF **************************************************************** # |
| 12366 |
# None # |
| 12367 |
# # |
| 12368 |
# INPUT *************************************************************** # |
| 12369 |
# d0 = longowrd value to store # |
| 12370 |
# d1 = index of register to fetch from # |
| 12371 |
# # |
| 12372 |
# OUTPUT ************************************************************** # |
| 12373 |
# (data register is updated) # |
| 12374 |
# # |
| 12375 |
# ALGORITHM *********************************************************** # |
| 12376 |
# According to the index value in d1, store the longword value # |
| 12377 |
# in d0 to the corresponding data register. D0/D1 are on the stack # |
| 12378 |
# while the rest are in their initial places. # |
| 12379 |
# # |
| 12380 |
######################################################################### |
| 12381 |
|
| 12382 |
global store_dreg_l |
| 12383 |
store_dreg_l: |
| 12384 |
mov.w (tbl_sdregl.b,%pc,%d1.w*2),%d1 |
| 12385 |
jmp (tbl_sdregl.b,%pc,%d1.w*1) |
| 12386 |
|
| 12387 |
tbl_sdregl: |
| 12388 |
short sdregl0 - tbl_sdregl |
| 12389 |
short sdregl1 - tbl_sdregl |
| 12390 |
short sdregl2 - tbl_sdregl |
| 12391 |
short sdregl3 - tbl_sdregl |
| 12392 |
short sdregl4 - tbl_sdregl |
| 12393 |
short sdregl5 - tbl_sdregl |
| 12394 |
short sdregl6 - tbl_sdregl |
| 12395 |
short sdregl7 - tbl_sdregl |
| 12396 |
|
| 12397 |
sdregl0: |
| 12398 |
mov.l %d0,EXC_DREGS+0x0(%a6) |
| 12399 |
rts |
| 12400 |
sdregl1: |
| 12401 |
mov.l %d0,EXC_DREGS+0x4(%a6) |
| 12402 |
rts |
| 12403 |
sdregl2: |
| 12404 |
mov.l %d0,%d2 |
| 12405 |
rts |
| 12406 |
sdregl3: |
| 12407 |
mov.l %d0,%d3 |
| 12408 |
rts |
| 12409 |
sdregl4: |
| 12410 |
mov.l %d0,%d4 |
| 12411 |
rts |
| 12412 |
sdregl5: |
| 12413 |
mov.l %d0,%d5 |
| 12414 |
rts |
| 12415 |
sdregl6: |
| 12416 |
mov.l %d0,%d6 |
| 12417 |
rts |
| 12418 |
sdregl7: |
| 12419 |
mov.l %d0,%d7 |
| 12420 |
rts |
| 12421 |
|
| 12422 |
######################################################################### |
| 12423 |
# XDEF **************************************************************** # |
| 12424 |
# store_dreg_w(): store word to data register specified by d1 # |
| 12425 |
# # |
| 12426 |
# XREF **************************************************************** # |
| 12427 |
# None # |
| 12428 |
# # |
| 12429 |
# INPUT *************************************************************** # |
| 12430 |
# d0 = word value to store # |
| 12431 |
# d1 = index of register to fetch from # |
| 12432 |
# # |
| 12433 |
# OUTPUT ************************************************************** # |
| 12434 |
# (data register is updated) # |
| 12435 |
# # |
| 12436 |
# ALGORITHM *********************************************************** # |
| 12437 |
# According to the index value in d1, store the word value # |
| 12438 |
# in d0 to the corresponding data register. D0/D1 are on the stack # |
| 12439 |
# while the rest are in their initial places. # |
| 12440 |
# # |
| 12441 |
######################################################################### |
| 12442 |
|
| 12443 |
global store_dreg_w |
| 12444 |
store_dreg_w: |
| 12445 |
mov.w (tbl_sdregw.b,%pc,%d1.w*2),%d1 |
| 12446 |
jmp (tbl_sdregw.b,%pc,%d1.w*1) |
| 12447 |
|
| 12448 |
tbl_sdregw: |
| 12449 |
short sdregw0 - tbl_sdregw |
| 12450 |
short sdregw1 - tbl_sdregw |
| 12451 |
short sdregw2 - tbl_sdregw |
| 12452 |
short sdregw3 - tbl_sdregw |
| 12453 |
short sdregw4 - tbl_sdregw |
| 12454 |
short sdregw5 - tbl_sdregw |
| 12455 |
short sdregw6 - tbl_sdregw |
| 12456 |
short sdregw7 - tbl_sdregw |
| 12457 |
|
| 12458 |
sdregw0: |
| 12459 |
mov.w %d0,2+EXC_DREGS+0x0(%a6) |
| 12460 |
rts |
| 12461 |
sdregw1: |
| 12462 |
mov.w %d0,2+EXC_DREGS+0x4(%a6) |
| 12463 |
rts |
| 12464 |
sdregw2: |
| 12465 |
mov.w %d0,%d2 |
| 12466 |
rts |
| 12467 |
sdregw3: |
| 12468 |
mov.w %d0,%d3 |
| 12469 |
rts |
| 12470 |
sdregw4: |
| 12471 |
mov.w %d0,%d4 |
| 12472 |
rts |
| 12473 |
sdregw5: |
| 12474 |
mov.w %d0,%d5 |
| 12475 |
rts |
| 12476 |
sdregw6: |
| 12477 |
mov.w %d0,%d6 |
| 12478 |
rts |
| 12479 |
sdregw7: |
| 12480 |
mov.w %d0,%d7 |
| 12481 |
rts |
| 12482 |
|
| 12483 |
######################################################################### |
| 12484 |
# XDEF **************************************************************** # |
| 12485 |
# store_dreg_b(): store byte to data register specified by d1 # |
| 12486 |
# # |
| 12487 |
# XREF **************************************************************** # |
| 12488 |
# None # |
| 12489 |
# # |
| 12490 |
# INPUT *************************************************************** # |
| 12491 |
# d0 = byte value to store # |
| 12492 |
# d1 = index of register to fetch from # |
| 12493 |
# # |
| 12494 |
# OUTPUT ************************************************************** # |
| 12495 |
# (data register is updated) # |
| 12496 |
# # |
| 12497 |
# ALGORITHM *********************************************************** # |
| 12498 |
# According to the index value in d1, store the byte value # |
| 12499 |
# in d0 to the corresponding data register. D0/D1 are on the stack # |
| 12500 |
# while the rest are in their initial places. # |
| 12501 |
# # |
| 12502 |
######################################################################### |
| 12503 |
|
| 12504 |
global store_dreg_b |
| 12505 |
store_dreg_b: |
| 12506 |
mov.w (tbl_sdregb.b,%pc,%d1.w*2),%d1 |
| 12507 |
jmp (tbl_sdregb.b,%pc,%d1.w*1) |
| 12508 |
|
| 12509 |
tbl_sdregb: |
| 12510 |
short sdregb0 - tbl_sdregb |
| 12511 |
short sdregb1 - tbl_sdregb |
| 12512 |
short sdregb2 - tbl_sdregb |
| 12513 |
short sdregb3 - tbl_sdregb |
| 12514 |
short sdregb4 - tbl_sdregb |
| 12515 |
short sdregb5 - tbl_sdregb |
| 12516 |
short sdregb6 - tbl_sdregb |
| 12517 |
short sdregb7 - tbl_sdregb |
| 12518 |
|
| 12519 |
sdregb0: |
| 12520 |
mov.b %d0,3+EXC_DREGS+0x0(%a6) |
| 12521 |
rts |
| 12522 |
sdregb1: |
| 12523 |
mov.b %d0,3+EXC_DREGS+0x4(%a6) |
| 12524 |
rts |
| 12525 |
sdregb2: |
| 12526 |
mov.b %d0,%d2 |
| 12527 |
rts |
| 12528 |
sdregb3: |
| 12529 |
mov.b %d0,%d3 |
| 12530 |
rts |
| 12531 |
sdregb4: |
| 12532 |
mov.b %d0,%d4 |
| 12533 |
rts |
| 12534 |
sdregb5: |
| 12535 |
mov.b %d0,%d5 |
| 12536 |
rts |
| 12537 |
sdregb6: |
| 12538 |
mov.b %d0,%d6 |
| 12539 |
rts |
| 12540 |
sdregb7: |
| 12541 |
mov.b %d0,%d7 |
| 12542 |
rts |
| 12543 |
|
| 12544 |
######################################################################### |
| 12545 |
# XDEF **************************************************************** # |
| 12546 |
# inc_areg(): increment an address register by the value in d0 # |
| 12547 |
# # |
| 12548 |
# XREF **************************************************************** # |
| 12549 |
# None # |
| 12550 |
# # |
| 12551 |
# INPUT *************************************************************** # |
| 12552 |
# d0 = amount to increment by # |
| 12553 |
# d1 = index of address register to increment # |
| 12554 |
# # |
| 12555 |
# OUTPUT ************************************************************** # |
| 12556 |
# (address register is updated) # |
| 12557 |
# # |
| 12558 |
# ALGORITHM *********************************************************** # |
| 12559 |
# Typically used for an instruction w/ a post-increment <ea>, # |
| 12560 |
# this routine adds the increment value in d0 to the address register # |
| 12561 |
# specified by d1. A0/A1/A6/A7 reside on the stack. The rest reside # |
| 12562 |
# in their original places. # |
| 12563 |
# For a7, if the increment amount is one, then we have to # |
| 12564 |
# increment by two. For any a7 update, set the mia7_flag so that if # |
| 12565 |
# an access error exception occurs later in emulation, this address # |
| 12566 |
# register update can be undone. # |
| 12567 |
# # |
| 12568 |
######################################################################### |
| 12569 |
|
| 12570 |
global inc_areg |
| 12571 |
inc_areg: |
| 12572 |
mov.w (tbl_iareg.b,%pc,%d1.w*2),%d1 |
| 12573 |
jmp (tbl_iareg.b,%pc,%d1.w*1) |
| 12574 |
|
| 12575 |
tbl_iareg: |
| 12576 |
short iareg0 - tbl_iareg |
| 12577 |
short iareg1 - tbl_iareg |
| 12578 |
short iareg2 - tbl_iareg |
| 12579 |
short iareg3 - tbl_iareg |
| 12580 |
short iareg4 - tbl_iareg |
| 12581 |
short iareg5 - tbl_iareg |
| 12582 |
short iareg6 - tbl_iareg |
| 12583 |
short iareg7 - tbl_iareg |
| 12584 |
|
| 12585 |
iareg0: add.l %d0,EXC_DREGS+0x8(%a6) |
| 12586 |
rts |
| 12587 |
iareg1: add.l %d0,EXC_DREGS+0xc(%a6) |
| 12588 |
rts |
| 12589 |
iareg2: add.l %d0,%a2 |
| 12590 |
rts |
| 12591 |
iareg3: add.l %d0,%a3 |
| 12592 |
rts |
| 12593 |
iareg4: add.l %d0,%a4 |
| 12594 |
rts |
| 12595 |
iareg5: add.l %d0,%a5 |
| 12596 |
rts |
| 12597 |
iareg6: add.l %d0,(%a6) |
| 12598 |
rts |
| 12599 |
iareg7: mov.b &mia7_flg,SPCOND_FLG(%a6) |
| 12600 |
cmpi.b %d0,&0x1 |
| 12601 |
beq.b iareg7b |
| 12602 |
add.l %d0,EXC_A7(%a6) |
| 12603 |
rts |
| 12604 |
iareg7b: |
| 12605 |
addq.l &0x2,EXC_A7(%a6) |
| 12606 |
rts |
| 12607 |
|
| 12608 |
######################################################################### |
| 12609 |
# XDEF **************************************************************** # |
| 12610 |
# dec_areg(): decrement an address register by the value in d0 # |
| 12611 |
# # |
| 12612 |
# XREF **************************************************************** # |
| 12613 |
# None # |
| 12614 |
# # |
| 12615 |
# INPUT *************************************************************** # |
| 12616 |
# d0 = amount to decrement by # |
| 12617 |
# d1 = index of address register to decrement # |
| 12618 |
# # |
| 12619 |
# OUTPUT ************************************************************** # |
| 12620 |
# (address register is updated) # |
| 12621 |
# # |
| 12622 |
# ALGORITHM *********************************************************** # |
| 12623 |
# Typically used for an instruction w/ a pre-decrement <ea>, # |
| 12624 |
# this routine adds the decrement value in d0 to the address register # |
| 12625 |
# specified by d1. A0/A1/A6/A7 reside on the stack. The rest reside # |
| 12626 |
# in their original places. # |
| 12627 |
# For a7, if the decrement amount is one, then we have to # |
| 12628 |
# decrement by two. For any a7 update, set the mda7_flag so that if # |
| 12629 |
# an access error exception occurs later in emulation, this address # |
| 12630 |
# register update can be undone. # |
| 12631 |
# # |
| 12632 |
######################################################################### |
| 12633 |
|
| 12634 |
global dec_areg |
| 12635 |
dec_areg: |
| 12636 |
mov.w (tbl_dareg.b,%pc,%d1.w*2),%d1 |
| 12637 |
jmp (tbl_dareg.b,%pc,%d1.w*1) |
| 12638 |
|
| 12639 |
tbl_dareg: |
| 12640 |
short dareg0 - tbl_dareg |
| 12641 |
short dareg1 - tbl_dareg |
| 12642 |
short dareg2 - tbl_dareg |
| 12643 |
short dareg3 - tbl_dareg |
| 12644 |
short dareg4 - tbl_dareg |
| 12645 |
short dareg5 - tbl_dareg |
| 12646 |
short dareg6 - tbl_dareg |
| 12647 |
short dareg7 - tbl_dareg |
| 12648 |
|
| 12649 |
dareg0: sub.l %d0,EXC_DREGS+0x8(%a6) |
| 12650 |
rts |
| 12651 |
dareg1: sub.l %d0,EXC_DREGS+0xc(%a6) |
| 12652 |
rts |
| 12653 |
dareg2: sub.l %d0,%a2 |
| 12654 |
rts |
| 12655 |
dareg3: sub.l %d0,%a3 |
| 12656 |
rts |
| 12657 |
dareg4: sub.l %d0,%a4 |
| 12658 |
rts |
| 12659 |
dareg5: sub.l %d0,%a5 |
| 12660 |
rts |
| 12661 |
dareg6: sub.l %d0,(%a6) |
| 12662 |
rts |
| 12663 |
dareg7: mov.b &mda7_flg,SPCOND_FLG(%a6) |
| 12664 |
cmpi.b %d0,&0x1 |
| 12665 |
beq.b dareg7b |
| 12666 |
sub.l %d0,EXC_A7(%a6) |
| 12667 |
rts |
| 12668 |
dareg7b: |
| 12669 |
subq.l &0x2,EXC_A7(%a6) |
| 12670 |
rts |
| 12671 |
|
| 12672 |
############################################################################## |
| 12673 |
|
| 12674 |
######################################################################### |
| 12675 |
# XDEF **************************************************************** # |
| 12676 |
# load_fpn1(): load FP register value into FP_SRC(a6). # |
| 12677 |
# # |
| 12678 |
# XREF **************************************************************** # |
| 12679 |
# None # |
| 12680 |
# # |
| 12681 |
# INPUT *************************************************************** # |
| 12682 |
# d0 = index of FP register to load # |
| 12683 |
# # |
| 12684 |
# OUTPUT ************************************************************** # |
| 12685 |
# FP_SRC(a6) = value loaded from FP register file # |
| 12686 |
# # |
| 12687 |
# ALGORITHM *********************************************************** # |
| 12688 |
# Using the index in d0, load FP_SRC(a6) with a number from the # |
| 12689 |
# FP register file. # |
| 12690 |
# # |
| 12691 |
######################################################################### |
| 12692 |
|
| 12693 |
global load_fpn1 |
| 12694 |
load_fpn1: |
| 12695 |
mov.w (tbl_load_fpn1.b,%pc,%d0.w*2), %d0 |
| 12696 |
jmp (tbl_load_fpn1.b,%pc,%d0.w*1) |
| 12697 |
|
| 12698 |
tbl_load_fpn1: |
| 12699 |
short load_fpn1_0 - tbl_load_fpn1 |
| 12700 |
short load_fpn1_1 - tbl_load_fpn1 |
| 12701 |
short load_fpn1_2 - tbl_load_fpn1 |
| 12702 |
short load_fpn1_3 - tbl_load_fpn1 |
| 12703 |
short load_fpn1_4 - tbl_load_fpn1 |
| 12704 |
short load_fpn1_5 - tbl_load_fpn1 |
| 12705 |
short load_fpn1_6 - tbl_load_fpn1 |
| 12706 |
short load_fpn1_7 - tbl_load_fpn1 |
| 12707 |
|
| 12708 |
load_fpn1_0: |
| 12709 |
mov.l 0+EXC_FP0(%a6), 0+FP_SRC(%a6) |
| 12710 |
mov.l 4+EXC_FP0(%a6), 4+FP_SRC(%a6) |
| 12711 |
mov.l 8+EXC_FP0(%a6), 8+FP_SRC(%a6) |
| 12712 |
lea FP_SRC(%a6), %a0 |
| 12713 |
rts |
| 12714 |
load_fpn1_1: |
| 12715 |
mov.l 0+EXC_FP1(%a6), 0+FP_SRC(%a6) |
| 12716 |
mov.l 4+EXC_FP1(%a6), 4+FP_SRC(%a6) |
| 12717 |
mov.l 8+EXC_FP1(%a6), 8+FP_SRC(%a6) |
| 12718 |
lea FP_SRC(%a6), %a0 |
| 12719 |
rts |
| 12720 |
load_fpn1_2: |
| 12721 |
fmovm.x &0x20, FP_SRC(%a6) |
| 12722 |
lea FP_SRC(%a6), %a0 |
| 12723 |
rts |
| 12724 |
load_fpn1_3: |
| 12725 |
fmovm.x &0x10, FP_SRC(%a6) |
| 12726 |
lea FP_SRC(%a6), %a0 |
| 12727 |
rts |
| 12728 |
load_fpn1_4: |
| 12729 |
fmovm.x &0x08, FP_SRC(%a6) |
| 12730 |
lea FP_SRC(%a6), %a0 |
| 12731 |
rts |
| 12732 |
load_fpn1_5: |
| 12733 |
fmovm.x &0x04, FP_SRC(%a6) |
| 12734 |
lea FP_SRC(%a6), %a0 |
| 12735 |
rts |
| 12736 |
load_fpn1_6: |
| 12737 |
fmovm.x &0x02, FP_SRC(%a6) |
| 12738 |
lea FP_SRC(%a6), %a0 |
| 12739 |
rts |
| 12740 |
load_fpn1_7: |
| 12741 |
fmovm.x &0x01, FP_SRC(%a6) |
| 12742 |
lea FP_SRC(%a6), %a0 |
| 12743 |
rts |
| 12744 |
|
| 12745 |
############################################################################# |
| 12746 |
|
| 12747 |
######################################################################### |
| 12748 |
# XDEF **************************************************************** # |
| 12749 |
# load_fpn2(): load FP register value into FP_DST(a6). # |
| 12750 |
# # |
| 12751 |
# XREF **************************************************************** # |
| 12752 |
# None # |
| 12753 |
# # |
| 12754 |
# INPUT *************************************************************** # |
| 12755 |
# d0 = index of FP register to load # |
| 12756 |
# # |
| 12757 |
# OUTPUT ************************************************************** # |
| 12758 |
# FP_DST(a6) = value loaded from FP register file # |
| 12759 |
# # |
| 12760 |
# ALGORITHM *********************************************************** # |
| 12761 |
# Using the index in d0, load FP_DST(a6) with a number from the # |
| 12762 |
# FP register file. # |
| 12763 |
# # |
| 12764 |
######################################################################### |
| 12765 |
|
| 12766 |
global load_fpn2 |
| 12767 |
load_fpn2: |
| 12768 |
mov.w (tbl_load_fpn2.b,%pc,%d0.w*2), %d0 |
| 12769 |
jmp (tbl_load_fpn2.b,%pc,%d0.w*1) |
| 12770 |
|
| 12771 |
tbl_load_fpn2: |
| 12772 |
short load_fpn2_0 - tbl_load_fpn2 |
| 12773 |
short load_fpn2_1 - tbl_load_fpn2 |
| 12774 |
short load_fpn2_2 - tbl_load_fpn2 |
| 12775 |
short load_fpn2_3 - tbl_load_fpn2 |
| 12776 |
short load_fpn2_4 - tbl_load_fpn2 |
| 12777 |
short load_fpn2_5 - tbl_load_fpn2 |
| 12778 |
short load_fpn2_6 - tbl_load_fpn2 |
| 12779 |
short load_fpn2_7 - tbl_load_fpn2 |
| 12780 |
|
| 12781 |
load_fpn2_0: |
| 12782 |
mov.l 0+EXC_FP0(%a6), 0+FP_DST(%a6) |
| 12783 |
mov.l 4+EXC_FP0(%a6), 4+FP_DST(%a6) |
| 12784 |
mov.l 8+EXC_FP0(%a6), 8+FP_DST(%a6) |
| 12785 |
lea FP_DST(%a6), %a0 |
| 12786 |
rts |
| 12787 |
load_fpn2_1: |
| 12788 |
mov.l 0+EXC_FP1(%a6), 0+FP_DST(%a6) |
| 12789 |
mov.l 4+EXC_FP1(%a6), 4+FP_DST(%a6) |
| 12790 |
mov.l 8+EXC_FP1(%a6), 8+FP_DST(%a6) |
| 12791 |
lea FP_DST(%a6), %a0 |
| 12792 |
rts |
| 12793 |
load_fpn2_2: |
| 12794 |
fmovm.x &0x20, FP_DST(%a6) |
| 12795 |
lea FP_DST(%a6), %a0 |
| 12796 |
rts |
| 12797 |
load_fpn2_3: |
| 12798 |
fmovm.x &0x10, FP_DST(%a6) |
| 12799 |
lea FP_DST(%a6), %a0 |
| 12800 |
rts |
| 12801 |
load_fpn2_4: |
| 12802 |
fmovm.x &0x08, FP_DST(%a6) |
| 12803 |
lea FP_DST(%a6), %a0 |
| 12804 |
rts |
| 12805 |
load_fpn2_5: |
| 12806 |
fmovm.x &0x04, FP_DST(%a6) |
| 12807 |
lea FP_DST(%a6), %a0 |
| 12808 |
rts |
| 12809 |
load_fpn2_6: |
| 12810 |
fmovm.x &0x02, FP_DST(%a6) |
| 12811 |
lea FP_DST(%a6), %a0 |
| 12812 |
rts |
| 12813 |
load_fpn2_7: |
| 12814 |
fmovm.x &0x01, FP_DST(%a6) |
| 12815 |
lea FP_DST(%a6), %a0 |
| 12816 |
rts |
| 12817 |
|
| 12818 |
############################################################################# |
| 12819 |
|
| 12820 |
######################################################################### |
| 12821 |
# XDEF **************************************************************** # |
| 12822 |
# store_fpreg(): store an fp value to the fpreg designated d0. # |
| 12823 |
# # |
| 12824 |
# XREF **************************************************************** # |
| 12825 |
# None # |
| 12826 |
# # |
| 12827 |
# INPUT *************************************************************** # |
| 12828 |
# fp0 = extended precision value to store # |
| 12829 |
# d0 = index of floating-point register # |
| 12830 |
# # |
| 12831 |
# OUTPUT ************************************************************** # |
| 12832 |
# None # |
| 12833 |
# # |
| 12834 |
# ALGORITHM *********************************************************** # |
| 12835 |
# Store the value in fp0 to the FP register designated by the # |
| 12836 |
# value in d0. The FP number can be DENORM or SNAN so we have to be # |
| 12837 |
# careful that we don't take an exception here. # |
| 12838 |
# # |
| 12839 |
######################################################################### |
| 12840 |
|
| 12841 |
global store_fpreg |
| 12842 |
store_fpreg: |
| 12843 |
mov.w (tbl_store_fpreg.b,%pc,%d0.w*2), %d0 |
| 12844 |
jmp (tbl_store_fpreg.b,%pc,%d0.w*1) |
| 12845 |
|
| 12846 |
tbl_store_fpreg: |
| 12847 |
short store_fpreg_0 - tbl_store_fpreg |
| 12848 |
short store_fpreg_1 - tbl_store_fpreg |
| 12849 |
short store_fpreg_2 - tbl_store_fpreg |
| 12850 |
short store_fpreg_3 - tbl_store_fpreg |
| 12851 |
short store_fpreg_4 - tbl_store_fpreg |
| 12852 |
short store_fpreg_5 - tbl_store_fpreg |
| 12853 |
short store_fpreg_6 - tbl_store_fpreg |
| 12854 |
short store_fpreg_7 - tbl_store_fpreg |
| 12855 |
|
| 12856 |
store_fpreg_0: |
| 12857 |
fmovm.x &0x80, EXC_FP0(%a6) |
| 12858 |
rts |
| 12859 |
store_fpreg_1: |
| 12860 |
fmovm.x &0x80, EXC_FP1(%a6) |
| 12861 |
rts |
| 12862 |
store_fpreg_2: |
| 12863 |
fmovm.x &0x01, -(%sp) |
| 12864 |
fmovm.x (%sp)+, &0x20 |
| 12865 |
rts |
| 12866 |
store_fpreg_3: |
| 12867 |
fmovm.x &0x01, -(%sp) |
| 12868 |
fmovm.x (%sp)+, &0x10 |
| 12869 |
rts |
| 12870 |
store_fpreg_4: |
| 12871 |
fmovm.x &0x01, -(%sp) |
| 12872 |
fmovm.x (%sp)+, &0x08 |
| 12873 |
rts |
| 12874 |
store_fpreg_5: |
| 12875 |
fmovm.x &0x01, -(%sp) |
| 12876 |
fmovm.x (%sp)+, &0x04 |
| 12877 |
rts |
| 12878 |
store_fpreg_6: |
| 12879 |
fmovm.x &0x01, -(%sp) |
| 12880 |
fmovm.x (%sp)+, &0x02 |
| 12881 |
rts |
| 12882 |
store_fpreg_7: |
| 12883 |
fmovm.x &0x01, -(%sp) |
| 12884 |
fmovm.x (%sp)+, &0x01 |
| 12885 |
rts |
| 12886 |
|
| 12887 |
######################################################################### |
| 12888 |
# XDEF **************************************************************** # |
| 12889 |
# get_packed(): fetch a packed operand from memory and then # |
| 12890 |
# convert it to a floating-point binary number. # |
| 12891 |
# # |
| 12892 |
# XREF **************************************************************** # |
| 12893 |
# _dcalc_ea() - calculate the correct <ea> # |
| 12894 |
# _mem_read() - fetch the packed operand from memory # |
| 12895 |
# facc_in_x() - the fetch failed so jump to special exit code # |
| 12896 |
# decbin() - convert packed to binary extended precision # |
| 12897 |
# # |
| 12898 |
# INPUT *************************************************************** # |
| 12899 |
# None # |
| 12900 |
# # |
| 12901 |
# OUTPUT ************************************************************** # |
| 12902 |
# If no failure on _mem_read(): # |
| 12903 |
# FP_SRC(a6) = packed operand now as a binary FP number # |
| 12904 |
# # |
| 12905 |
# ALGORITHM *********************************************************** # |
| 12906 |
# Get the correct <ea> which is the value on the exception stack # |
| 12907 |
# frame w/ maybe a correction factor if the <ea> is -(an) or (an)+. # |
| 12908 |
# Then, fetch the operand from memory. If the fetch fails, exit # |
| 12909 |
# through facc_in_x(). # |
| 12910 |
# If the packed operand is a ZERO,NAN, or INF, convert it to # |
| 12911 |
# its binary representation here. Else, call decbin() which will # |
| 12912 |
# convert the packed value to an extended precision binary value. # |
| 12913 |
# # |
| 12914 |
######################################################################### |
| 12915 |
|
| 12916 |
# the stacked <ea> for packed is correct except for -(An). |
| 12917 |
# the base reg must be updated for both -(An) and (An)+. |
| 12918 |
global get_packed |
| 12919 |
get_packed: |
| 12920 |
mov.l &0xc,%d0 # packed is 12 bytes |
| 12921 |
bsr.l _dcalc_ea # fetch <ea>; correct An |
| 12922 |
|
| 12923 |
lea FP_SRC(%a6),%a1 # pass: ptr to super dst |
| 12924 |
mov.l &0xc,%d0 # pass: 12 bytes |
| 12925 |
bsr.l _dmem_read # read packed operand |
| 12926 |
|
| 12927 |
tst.l %d1 # did dfetch fail? |
| 12928 |
bne.l facc_in_x # yes |
| 12929 |
|
| 12930 |
# The packed operand is an INF or a NAN if the exponent field is all ones. |
| 12931 |
bfextu FP_SRC(%a6){&1:&15},%d0 # get exp |
| 12932 |
cmpi.w %d0,&0x7fff # INF or NAN? |
| 12933 |
bne.b gp_try_zero # no |
| 12934 |
rts # operand is an INF or NAN |
| 12935 |
|
| 12936 |
# The packed operand is a zero if the mantissa is all zero, else it's |
| 12937 |
# a normal packed op. |
| 12938 |
gp_try_zero: |
| 12939 |
mov.b 3+FP_SRC(%a6),%d0 # get byte 4 |
| 12940 |
andi.b &0x0f,%d0 # clear all but last nybble |
| 12941 |
bne.b gp_not_spec # not a zero |
| 12942 |
tst.l FP_SRC_HI(%a6) # is lw 2 zero? |
| 12943 |
bne.b gp_not_spec # not a zero |
| 12944 |
tst.l FP_SRC_LO(%a6) # is lw 3 zero? |
| 12945 |
bne.b gp_not_spec # not a zero |
| 12946 |
rts # operand is a ZERO |
| 12947 |
gp_not_spec: |
| 12948 |
lea FP_SRC(%a6),%a0 # pass: ptr to packed op |
| 12949 |
bsr.l decbin # convert to extended |
| 12950 |
fmovm.x &0x80,FP_SRC(%a6) # make this the srcop |
| 12951 |
rts |
| 12952 |
|
| 12953 |
######################################################################### |
| 12954 |
# decbin(): Converts normalized packed bcd value pointed to by register # |
| 12955 |
# a0 to extended-precision value in fp0. # |
| 12956 |
# # |
| 12957 |
# INPUT *************************************************************** # |
| 12958 |
# a0 = pointer to normalized packed bcd value # |
| 12959 |
# # |
| 12960 |
# OUTPUT ************************************************************** # |
| 12961 |
# fp0 = exact fp representation of the packed bcd value. # |
| 12962 |
# # |
| 12963 |
# ALGORITHM *********************************************************** # |
| 12964 |
# Expected is a normal bcd (i.e. non-exceptional; all inf, zero, # |
| 12965 |
# and NaN operands are dispatched without entering this routine) # |
| 12966 |
# value in 68881/882 format at location (a0). # |
| 12967 |
# # |
| 12968 |
# A1. Convert the bcd exponent to binary by successive adds and # |
| 12969 |
# muls. Set the sign according to SE. Subtract 16 to compensate # |
| 12970 |
# for the mantissa which is to be interpreted as 17 integer # |
| 12971 |
# digits, rather than 1 integer and 16 fraction digits. # |
| 12972 |
# Note: this operation can never overflow. # |
| 12973 |
# # |
| 12974 |
# A2. Convert the bcd mantissa to binary by successive # |
| 12975 |
# adds and muls in FP0. Set the sign according to SM. # |
| 12976 |
# The mantissa digits will be converted with the decimal point # |
| 12977 |
# assumed following the least-significant digit. # |
| 12978 |
# Note: this operation can never overflow. # |
| 12979 |
# # |
| 12980 |
# A3. Count the number of leading/trailing zeros in the # |
| 12981 |
# bcd string. If SE is positive, count the leading zeros; # |
| 12982 |
# if negative, count the trailing zeros. Set the adjusted # |
| 12983 |
# exponent equal to the exponent from A1 and the zero count # |
| 12984 |
# added if SM = 1 and subtracted if SM = 0. Scale the # |
| 12985 |
# mantissa the equivalent of forcing in the bcd value: # |
| 12986 |
# # |
| 12987 |
# SM = 0 a non-zero digit in the integer position # |
| 12988 |
# SM = 1 a non-zero digit in Mant0, lsd of the fraction # |
| 12989 |
# # |
| 12990 |
# this will insure that any value, regardless of its # |
| 12991 |
# representation (ex. 0.1E2, 1E1, 10E0, 100E-1), is converted # |
| 12992 |
# consistently. # |
| 12993 |
# # |
| 12994 |
# A4. Calculate the factor 10^exp in FP1 using a table of # |
| 12995 |
# 10^(2^n) values. To reduce the error in forming factors # |
| 12996 |
# greater than 10^27, a directed rounding scheme is used with # |
| 12997 |
# tables rounded to RN, RM, and RP, according to the table # |
| 12998 |
# in the comments of the pwrten section. # |
| 12999 |
# # |
| 13000 |
# A5. Form the final binary number by scaling the mantissa by # |
| 13001 |
# the exponent factor. This is done by multiplying the # |
| 13002 |
# mantissa in FP0 by the factor in FP1 if the adjusted # |
| 13003 |
# exponent sign is positive, and dividing FP0 by FP1 if # |
| 13004 |
# it is negative. # |
| 13005 |
# # |
| 13006 |
# Clean up and return. Check if the final mul or div was inexact. # |
| 13007 |
# If so, set INEX1 in USER_FPSR. # |
| 13008 |
# # |
| 13009 |
######################################################################### |
| 13010 |
|
| 13011 |
# |
| 13012 |
# PTENRN, PTENRM, and PTENRP are arrays of powers of 10 rounded |
| 13013 |
# to nearest, minus, and plus, respectively. The tables include |
| 13014 |
# 10**{1,2,4,8,16,32,64,128,256,512,1024,2048,4096}. No rounding |
| 13015 |
# is required until the power is greater than 27, however, all |
| 13016 |
# tables include the first 5 for ease of indexing. |
| 13017 |
# |
| 13018 |
RTABLE: |
| 13019 |
byte 0,0,0,0 |
| 13020 |
byte 2,3,2,3 |
| 13021 |
byte 2,3,3,2 |
| 13022 |
byte 3,2,2,3 |
| 13023 |
|
| 13024 |
set FNIBS,7 |
| 13025 |
set FSTRT,0 |
| 13026 |
|
| 13027 |
set ESTRT,4 |
| 13028 |
set EDIGITS,2 |
| 13029 |
|
| 13030 |
global decbin |
| 13031 |
decbin: |
| 13032 |
mov.l 0x0(%a0),FP_SCR0_EX(%a6) # make a copy of input |
| 13033 |
mov.l 0x4(%a0),FP_SCR0_HI(%a6) # so we don't alter it |
| 13034 |
mov.l 0x8(%a0),FP_SCR0_LO(%a6) |
| 13035 |
|
| 13036 |
lea FP_SCR0(%a6),%a0 |
| 13037 |
|
| 13038 |
movm.l &0x3c00,-(%sp) # save d2-d5 |
| 13039 |
fmovm.x &0x1,-(%sp) # save fp1 |
| 13040 |
# |
| 13041 |
# Calculate exponent: |
| 13042 |
# 1. Copy bcd value in memory for use as a working copy. |
| 13043 |
# 2. Calculate absolute value of exponent in d1 by mul and add. |
| 13044 |
# 3. Correct for exponent sign. |
| 13045 |
# 4. Subtract 16 to compensate for interpreting the mant as all integer digits. |
| 13046 |
# (i.e., all digits assumed left of the decimal point.) |
| 13047 |
# |
| 13048 |
# Register usage: |
| 13049 |
# |
| 13050 |
# calc_e: |
| 13051 |
# (*) d0: temp digit storage |
| 13052 |
# (*) d1: accumulator for binary exponent |
| 13053 |
# (*) d2: digit count |
| 13054 |
# (*) d3: offset pointer |
| 13055 |
# ( ) d4: first word of bcd |
| 13056 |
# ( ) a0: pointer to working bcd value |
| 13057 |
# ( ) a6: pointer to original bcd value |
| 13058 |
# (*) FP_SCR1: working copy of original bcd value |
| 13059 |
# (*) L_SCR1: copy of original exponent word |
| 13060 |
# |
| 13061 |
calc_e: |
| 13062 |
mov.l &EDIGITS,%d2 # # of nibbles (digits) in fraction part |
| 13063 |
mov.l &ESTRT,%d3 # counter to pick up digits |
| 13064 |
mov.l (%a0),%d4 # get first word of bcd |
| 13065 |
clr.l %d1 # zero d1 for accumulator |
| 13066 |
e_gd: |
| 13067 |
mulu.l &0xa,%d1 # mul partial product by one digit place |
| 13068 |
bfextu %d4{%d3:&4},%d0 # get the digit and zero extend into d0 |
| 13069 |
add.l %d0,%d1 # d1 = d1 + d0 |
| 13070 |
addq.b &4,%d3 # advance d3 to the next digit |
| 13071 |
dbf.w %d2,e_gd # if we have used all 3 digits, exit loop |
| 13072 |
btst &30,%d4 # get SE |
| 13073 |
beq.b e_pos # don't negate if pos |
| 13074 |
neg.l %d1 # negate before subtracting |
| 13075 |
e_pos: |
| 13076 |
sub.l &16,%d1 # sub to compensate for shift of mant |
| 13077 |
bge.b e_save # if still pos, do not neg |
| 13078 |
neg.l %d1 # now negative, make pos and set SE |
| 13079 |
or.l &0x40000000,%d4 # set SE in d4, |
| 13080 |
or.l &0x40000000,(%a0) # and in working bcd |
| 13081 |
e_save: |
| 13082 |
mov.l %d1,-(%sp) # save exp on stack |
| 13083 |
# |
| 13084 |
# |
| 13085 |
# Calculate mantissa: |
| 13086 |
# 1. Calculate absolute value of mantissa in fp0 by mul and add. |
| 13087 |
# 2. Correct for mantissa sign. |
| 13088 |
# (i.e., all digits assumed left of the decimal point.) |
| 13089 |
# |
| 13090 |
# Register usage: |
| 13091 |
# |
| 13092 |
# calc_m: |
| 13093 |
# (*) d0: temp digit storage |
| 13094 |
# (*) d1: lword counter |
| 13095 |
# (*) d2: digit count |
| 13096 |
# (*) d3: offset pointer |
| 13097 |
# ( ) d4: words 2 and 3 of bcd |
| 13098 |
# ( ) a0: pointer to working bcd value |
| 13099 |
# ( ) a6: pointer to original bcd value |
| 13100 |
# (*) fp0: mantissa accumulator |
| 13101 |
# ( ) FP_SCR1: working copy of original bcd value |
| 13102 |
# ( ) L_SCR1: copy of original exponent word |
| 13103 |
# |
| 13104 |
calc_m: |
| 13105 |
mov.l &1,%d1 # word counter, init to 1 |
| 13106 |
fmov.s &0x00000000,%fp0 # accumulator |
| 13107 |
# |
| 13108 |
# |
| 13109 |
# Since the packed number has a long word between the first & second parts, |
| 13110 |
# get the integer digit then skip down & get the rest of the |
| 13111 |
# mantissa. We will unroll the loop once. |
| 13112 |
# |
| 13113 |
bfextu (%a0){&28:&4},%d0 # integer part is ls digit in long word |
| 13114 |
fadd.b %d0,%fp0 # add digit to sum in fp0 |
| 13115 |
# |
| 13116 |
# |
| 13117 |
# Get the rest of the mantissa. |
| 13118 |
# |
| 13119 |
loadlw: |
| 13120 |
mov.l (%a0,%d1.L*4),%d4 # load mantissa lonqword into d4 |
| 13121 |
mov.l &FSTRT,%d3 # counter to pick up digits |
| 13122 |
mov.l &FNIBS,%d2 # reset number of digits per a0 ptr |
| 13123 |
md2b: |
| 13124 |
fmul.s &0x41200000,%fp0 # fp0 = fp0 * 10 |
| 13125 |
bfextu %d4{%d3:&4},%d0 # get the digit and zero extend |
| 13126 |
fadd.b %d0,%fp0 # fp0 = fp0 + digit |
| 13127 |
# |
| 13128 |
# |
| 13129 |
# If all the digits (8) in that long word have been converted (d2=0), |
| 13130 |
# then inc d1 (=2) to point to the next long word and reset d3 to 0 |
| 13131 |
# to initialize the digit offset, and set d2 to 7 for the digit count; |
| 13132 |
# else continue with this long word. |
| 13133 |
# |
| 13134 |
addq.b &4,%d3 # advance d3 to the next digit |
| 13135 |
dbf.w %d2,md2b # check for last digit in this lw |
| 13136 |
nextlw: |
| 13137 |
addq.l &1,%d1 # inc lw pointer in mantissa |
| 13138 |
cmp.l %d1,&2 # test for last lw |
| 13139 |
ble.b loadlw # if not, get last one |
| 13140 |
# |
| 13141 |
# Check the sign of the mant and make the value in fp0 the same sign. |
| 13142 |
# |
| 13143 |
m_sign: |
| 13144 |
btst &31,(%a0) # test sign of the mantissa |
| 13145 |
beq.b ap_st_z # if clear, go to append/strip zeros |
| 13146 |
fneg.x %fp0 # if set, negate fp0 |
| 13147 |
# |
| 13148 |
# Append/strip zeros: |
| 13149 |
# |
| 13150 |
# For adjusted exponents which have an absolute value greater than 27*, |
| 13151 |
# this routine calculates the amount needed to normalize the mantissa |
| 13152 |
# for the adjusted exponent. That number is subtracted from the exp |
| 13153 |
# if the exp was positive, and added if it was negative. The purpose |
| 13154 |
# of this is to reduce the value of the exponent and the possibility |
| 13155 |
# of error in calculation of pwrten. |
| 13156 |
# |
| 13157 |
# 1. Branch on the sign of the adjusted exponent. |
| 13158 |
# 2p.(positive exp) |
| 13159 |
# 2. Check M16 and the digits in lwords 2 and 3 in descending order. |
| 13160 |
# 3. Add one for each zero encountered until a non-zero digit. |
| 13161 |
# 4. Subtract the count from the exp. |
| 13162 |
# 5. Check if the exp has crossed zero in #3 above; make the exp abs |
| 13163 |
# and set SE. |
| 13164 |
# 6. Multiply the mantissa by 10**count. |
| 13165 |
# 2n.(negative exp) |
| 13166 |
# 2. Check the digits in lwords 3 and 2 in descending order. |
| 13167 |
# 3. Add one for each zero encountered until a non-zero digit. |
| 13168 |
# 4. Add the count to the exp. |
| 13169 |
# 5. Check if the exp has crossed zero in #3 above; clear SE. |
| 13170 |
# 6. Divide the mantissa by 10**count. |
| 13171 |
# |
| 13172 |
# *Why 27? If the adjusted exponent is within -28 < expA < 28, than |
| 13173 |
# any adjustment due to append/strip zeros will drive the resultane |
| 13174 |
# exponent towards zero. Since all pwrten constants with a power |
| 13175 |
# of 27 or less are exact, there is no need to use this routine to |
| 13176 |
# attempt to lessen the resultant exponent. |
| 13177 |
# |
| 13178 |
# Register usage: |
| 13179 |
# |
| 13180 |
# ap_st_z: |
| 13181 |
# (*) d0: temp digit storage |
| 13182 |
# (*) d1: zero count |
| 13183 |
# (*) d2: digit count |
| 13184 |
# (*) d3: offset pointer |
| 13185 |
# ( ) d4: first word of bcd |
| 13186 |
# (*) d5: lword counter |
| 13187 |
# ( ) a0: pointer to working bcd value |
| 13188 |
# ( ) FP_SCR1: working copy of original bcd value |
| 13189 |
# ( ) L_SCR1: copy of original exponent word |
| 13190 |
# |
| 13191 |
# |
| 13192 |
# First check the absolute value of the exponent to see if this |
| 13193 |
# routine is necessary. If so, then check the sign of the exponent |
| 13194 |
# and do append (+) or strip (-) zeros accordingly. |
| 13195 |
# This section handles a positive adjusted exponent. |
| 13196 |
# |
| 13197 |
ap_st_z: |
| 13198 |
mov.l (%sp),%d1 # load expA for range test |
| 13199 |
cmp.l %d1,&27 # test is with 27 |
| 13200 |
ble.w pwrten # if abs(expA) <28, skip ap/st zeros |
| 13201 |
btst &30,(%a0) # check sign of exp |
| 13202 |
bne.b ap_st_n # if neg, go to neg side |
| 13203 |
clr.l %d1 # zero count reg |
| 13204 |
mov.l (%a0),%d4 # load lword 1 to d4 |
| 13205 |
bfextu %d4{&28:&4},%d0 # get M16 in d0 |
| 13206 |
bne.b ap_p_fx # if M16 is non-zero, go fix exp |
| 13207 |
addq.l &1,%d1 # inc zero count |
| 13208 |
mov.l &1,%d5 # init lword counter |
| 13209 |
mov.l (%a0,%d5.L*4),%d4 # get lword 2 to d4 |
| 13210 |
bne.b ap_p_cl # if lw 2 is zero, skip it |
| 13211 |
addq.l &8,%d1 # and inc count by 8 |
| 13212 |
addq.l &1,%d5 # inc lword counter |
| 13213 |
mov.l (%a0,%d5.L*4),%d4 # get lword 3 to d4 |
| 13214 |
ap_p_cl: |
| 13215 |
clr.l %d3 # init offset reg |
| 13216 |
mov.l &7,%d2 # init digit counter |
| 13217 |
ap_p_gd: |
| 13218 |
bfextu %d4{%d3:&4},%d0 # get digit |
| 13219 |
bne.b ap_p_fx # if non-zero, go to fix exp |
| 13220 |
addq.l &4,%d3 # point to next digit |
| 13221 |
addq.l &1,%d1 # inc digit counter |
| 13222 |
dbf.w %d2,ap_p_gd # get next digit |
| 13223 |
ap_p_fx: |
| 13224 |
mov.l %d1,%d0 # copy counter to d2 |
| 13225 |
mov.l (%sp),%d1 # get adjusted exp from memory |
| 13226 |
sub.l %d0,%d1 # subtract count from exp |
| 13227 |
bge.b ap_p_fm # if still pos, go to pwrten |
| 13228 |
neg.l %d1 # now its neg; get abs |
| 13229 |
mov.l (%a0),%d4 # load lword 1 to d4 |
| 13230 |
or.l &0x40000000,%d4 # and set SE in d4 |
| 13231 |
or.l &0x40000000,(%a0) # and in memory |
| 13232 |
# |
| 13233 |
# Calculate the mantissa multiplier to compensate for the striping of |
| 13234 |
# zeros from the mantissa. |
| 13235 |
# |
| 13236 |
ap_p_fm: |
| 13237 |
lea.l PTENRN(%pc),%a1 # get address of power-of-ten table |
| 13238 |
clr.l %d3 # init table index |
| 13239 |
fmov.s &0x3f800000,%fp1 # init fp1 to 1 |
| 13240 |
mov.l &3,%d2 # init d2 to count bits in counter |
| 13241 |
ap_p_el: |
| 13242 |
asr.l &1,%d0 # shift lsb into carry |
| 13243 |
bcc.b ap_p_en # if 1, mul fp1 by pwrten factor |
| 13244 |
fmul.x (%a1,%d3),%fp1 # mul by 10**(d3_bit_no) |
| 13245 |
ap_p_en: |
| 13246 |
add.l &12,%d3 # inc d3 to next rtable entry |
| 13247 |
tst.l %d0 # check if d0 is zero |
| 13248 |
bne.b ap_p_el # if not, get next bit |
| 13249 |
fmul.x %fp1,%fp0 # mul mantissa by 10**(no_bits_shifted) |
| 13250 |
bra.b pwrten # go calc pwrten |
| 13251 |
# |
| 13252 |
# This section handles a negative adjusted exponent. |
| 13253 |
# |
| 13254 |
ap_st_n: |
| 13255 |
clr.l %d1 # clr counter |
| 13256 |
mov.l &2,%d5 # set up d5 to point to lword 3 |
| 13257 |
mov.l (%a0,%d5.L*4),%d4 # get lword 3 |
| 13258 |
bne.b ap_n_cl # if not zero, check digits |
| 13259 |
sub.l &1,%d5 # dec d5 to point to lword 2 |
| 13260 |
addq.l &8,%d1 # inc counter by 8 |
| 13261 |
mov.l (%a0,%d5.L*4),%d4 # get lword 2 |
| 13262 |
ap_n_cl: |
| 13263 |
mov.l &28,%d3 # point to last digit |
| 13264 |
mov.l &7,%d2 # init digit counter |
| 13265 |
ap_n_gd: |
| 13266 |
bfextu %d4{%d3:&4},%d0 # get digit |
| 13267 |
bne.b ap_n_fx # if non-zero, go to exp fix |
| 13268 |
subq.l &4,%d3 # point to previous digit |
| 13269 |
addq.l &1,%d1 # inc digit counter |
| 13270 |
dbf.w %d2,ap_n_gd # get next digit |
| 13271 |
ap_n_fx: |
| 13272 |
mov.l %d1,%d0 # copy counter to d0 |
| 13273 |
mov.l (%sp),%d1 # get adjusted exp from memory |
| 13274 |
sub.l %d0,%d1 # subtract count from exp |
| 13275 |
bgt.b ap_n_fm # if still pos, go fix mantissa |
| 13276 |
neg.l %d1 # take abs of exp and clr SE |
| 13277 |
mov.l (%a0),%d4 # load lword 1 to d4 |
| 13278 |
and.l &0xbfffffff,%d4 # and clr SE in d4 |
| 13279 |
and.l &0xbfffffff,(%a0) # and in memory |
| 13280 |
# |
| 13281 |
# Calculate the mantissa multiplier to compensate for the appending of |
| 13282 |
# zeros to the mantissa. |
| 13283 |
# |
| 13284 |
ap_n_fm: |
| 13285 |
lea.l PTENRN(%pc),%a1 # get address of power-of-ten table |
| 13286 |
clr.l %d3 # init table index |
| 13287 |
fmov.s &0x3f800000,%fp1 # init fp1 to 1 |
| 13288 |
mov.l &3,%d2 # init d2 to count bits in counter |
| 13289 |
ap_n_el: |
| 13290 |
asr.l &1,%d0 # shift lsb into carry |
| 13291 |
bcc.b ap_n_en # if 1, mul fp1 by pwrten factor |
| 13292 |
fmul.x (%a1,%d3),%fp1 # mul by 10**(d3_bit_no) |
| 13293 |
ap_n_en: |
| 13294 |
add.l &12,%d3 # inc d3 to next rtable entry |
| 13295 |
tst.l %d0 # check if d0 is zero |
| 13296 |
bne.b ap_n_el # if not, get next bit |
| 13297 |
fdiv.x %fp1,%fp0 # div mantissa by 10**(no_bits_shifted) |
| 13298 |
# |
| 13299 |
# |
| 13300 |
# Calculate power-of-ten factor from adjusted and shifted exponent. |
| 13301 |
# |
| 13302 |
# Register usage: |
| 13303 |
# |
| 13304 |
# pwrten: |
| 13305 |
# (*) d0: temp |
| 13306 |
# ( ) d1: exponent |
| 13307 |
# (*) d2: {FPCR[6:5],SM,SE} as index in RTABLE; temp |
| 13308 |
# (*) d3: FPCR work copy |
| 13309 |
# ( ) d4: first word of bcd |
| 13310 |
# (*) a1: RTABLE pointer |
| 13311 |
# calc_p: |
| 13312 |
# (*) d0: temp |
| 13313 |
# ( ) d1: exponent |
| 13314 |
# (*) d3: PWRTxx table index |
| 13315 |
# ( ) a0: pointer to working copy of bcd |
| 13316 |
# (*) a1: PWRTxx pointer |
| 13317 |
# (*) fp1: power-of-ten accumulator |
| 13318 |
# |
| 13319 |
# Pwrten calculates the exponent factor in the selected rounding mode |
| 13320 |
# according to the following table: |
| 13321 |
# |
| 13322 |
# Sign of Mant Sign of Exp Rounding Mode PWRTEN Rounding Mode |
| 13323 |
# |
| 13324 |
# ANY ANY RN RN |
| 13325 |
# |
| 13326 |
# + + RP RP |
| 13327 |
# - + RP RM |
| 13328 |
# + - RP RM |
| 13329 |
# - - RP RP |
| 13330 |
# |
| 13331 |
# + + RM RM |
| 13332 |
# - + RM RP |
| 13333 |
# + - RM RP |
| 13334 |
# - - RM RM |
| 13335 |
# |
| 13336 |
# + + RZ RM |
| 13337 |
# - + RZ RM |
| 13338 |
# + - RZ RP |
| 13339 |
# - - RZ RP |
| 13340 |
# |
| 13341 |
# |
| 13342 |
pwrten: |
| 13343 |
mov.l USER_FPCR(%a6),%d3 # get user's FPCR |
| 13344 |
bfextu %d3{&26:&2},%d2 # isolate rounding mode bits |
| 13345 |
mov.l (%a0),%d4 # reload 1st bcd word to d4 |
| 13346 |
asl.l &2,%d2 # format d2 to be |
| 13347 |
bfextu %d4{&0:&2},%d0 # {FPCR[6],FPCR[5],SM,SE} |
| 13348 |
add.l %d0,%d2 # in d2 as index into RTABLE |
| 13349 |
lea.l RTABLE(%pc),%a1 # load rtable base |
| 13350 |
mov.b (%a1,%d2),%d0 # load new rounding bits from table |
| 13351 |
clr.l %d3 # clear d3 to force no exc and extended |
| 13352 |
bfins %d0,%d3{&26:&2} # stuff new rounding bits in FPCR |
| 13353 |
fmov.l %d3,%fpcr # write new FPCR |
| 13354 |
asr.l &1,%d0 # write correct PTENxx table |
| 13355 |
bcc.b not_rp # to a1 |
| 13356 |
lea.l PTENRP(%pc),%a1 # it is RP |
| 13357 |
bra.b calc_p # go to init section |
| 13358 |
not_rp: |
| 13359 |
asr.l &1,%d0 # keep checking |
| 13360 |
bcc.b not_rm |
| 13361 |
lea.l PTENRM(%pc),%a1 # it is RM |
| 13362 |
bra.b calc_p # go to init section |
| 13363 |
not_rm: |
| 13364 |
lea.l PTENRN(%pc),%a1 # it is RN |
| 13365 |
calc_p: |
| 13366 |
mov.l %d1,%d0 # copy exp to d0;use d0 |
| 13367 |
bpl.b no_neg # if exp is negative, |
| 13368 |
neg.l %d0 # invert it |
| 13369 |
or.l &0x40000000,(%a0) # and set SE bit |
| 13370 |
no_neg: |
| 13371 |
clr.l %d3 # table index |
| 13372 |
fmov.s &0x3f800000,%fp1 # init fp1 to 1 |
| 13373 |
e_loop: |
| 13374 |
asr.l &1,%d0 # shift next bit into carry |
| 13375 |
bcc.b e_next # if zero, skip the mul |
| 13376 |
fmul.x (%a1,%d3),%fp1 # mul by 10**(d3_bit_no) |
| 13377 |
e_next: |
| 13378 |
add.l &12,%d3 # inc d3 to next rtable entry |
| 13379 |
tst.l %d0 # check if d0 is zero |
| 13380 |
bne.b e_loop # not zero, continue shifting |
| 13381 |
# |
| 13382 |
# |
| 13383 |
# Check the sign of the adjusted exp and make the value in fp0 the |
| 13384 |
# same sign. If the exp was pos then multiply fp1*fp0; |
| 13385 |
# else divide fp0/fp1. |
| 13386 |
# |
| 13387 |
# Register Usage: |
| 13388 |
# norm: |
| 13389 |
# ( ) a0: pointer to working bcd value |
| 13390 |
# (*) fp0: mantissa accumulator |
| 13391 |
# ( ) fp1: scaling factor - 10**(abs(exp)) |
| 13392 |
# |
| 13393 |
pnorm: |
| 13394 |
btst &30,(%a0) # test the sign of the exponent |
| 13395 |
beq.b mul # if clear, go to multiply |
| 13396 |
div: |
| 13397 |
fdiv.x %fp1,%fp0 # exp is negative, so divide mant by exp |
| 13398 |
bra.b end_dec |
| 13399 |
mul: |
| 13400 |
fmul.x %fp1,%fp0 # exp is positive, so multiply by exp |
| 13401 |
# |
| 13402 |
# |
| 13403 |
# Clean up and return with result in fp0. |
| 13404 |
# |
| 13405 |
# If the final mul/div in decbin incurred an inex exception, |
| 13406 |
# it will be inex2, but will be reported as inex1 by get_op. |
| 13407 |
# |
| 13408 |
end_dec: |
| 13409 |
fmov.l %fpsr,%d0 # get status register |
| 13410 |
bclr &inex2_bit+8,%d0 # test for inex2 and clear it |
| 13411 |
beq.b no_exc # skip this if no exc |
| 13412 |
ori.w &inx1a_mask,2+USER_FPSR(%a6) # set INEX1/AINEX |
| 13413 |
no_exc: |
| 13414 |
add.l &0x4,%sp # clear 1 lw param |
| 13415 |
fmovm.x (%sp)+,&0x40 # restore fp1 |
| 13416 |
movm.l (%sp)+,&0x3c # restore d2-d5 |
| 13417 |
fmov.l &0x0,%fpcr |
| 13418 |
fmov.l &0x0,%fpsr |
| 13419 |
rts |
| 13420 |
|
| 13421 |
######################################################################### |
| 13422 |
# bindec(): Converts an input in extended precision format to bcd format# |
| 13423 |
# # |
| 13424 |
# INPUT *************************************************************** # |
| 13425 |
# a0 = pointer to the input extended precision value in memory. # |
| 13426 |
# the input may be either normalized, unnormalized, or # |
| 13427 |
# denormalized. # |
| 13428 |
# d0 = contains the k-factor sign-extended to 32-bits. # |
| 13429 |
# # |
| 13430 |
# OUTPUT ************************************************************** # |
| 13431 |
# FP_SCR0(a6) = bcd format result on the stack. # |
| 13432 |
# # |
| 13433 |
# ALGORITHM *********************************************************** # |
| 13434 |
# # |
| 13435 |
# A1. Set RM and size ext; Set SIGMA = sign of input. # |
| 13436 |
# The k-factor is saved for use in d7. Clear the # |
| 13437 |
# BINDEC_FLG for separating normalized/denormalized # |
| 13438 |
# input. If input is unnormalized or denormalized, # |
| 13439 |
# normalize it. # |
| 13440 |
# # |
| 13441 |
# A2. Set X = abs(input). # |
| 13442 |
# # |
| 13443 |
# A3. Compute ILOG. # |
| 13444 |
# ILOG is the log base 10 of the input value. It is # |
| 13445 |
# approximated by adding e + 0.f when the original # |
| 13446 |
# value is viewed as 2^^e * 1.f in extended precision. # |
| 13447 |
# This value is stored in d6. # |
| 13448 |
# # |
| 13449 |
# A4. Clr INEX bit. # |
| 13450 |
# The operation in A3 above may have set INEX2. # |
| 13451 |
# # |
| 13452 |
# A5. Set ICTR = 0; # |
| 13453 |
# ICTR is a flag used in A13. It must be set before the # |
| 13454 |
# loop entry A6. # |
| 13455 |
# # |
| 13456 |
# A6. Calculate LEN. # |
| 13457 |
# LEN is the number of digits to be displayed. The # |
| 13458 |
# k-factor can dictate either the total number of digits, # |
| 13459 |
# if it is a positive number, or the number of digits # |
| 13460 |
# after the decimal point which are to be included as # |
| 13461 |
# significant. See the 68882 manual for examples. # |
| 13462 |
# If LEN is computed to be greater than 17, set OPERR in # |
| 13463 |
# USER_FPSR. LEN is stored in d4. # |
| 13464 |
# # |
| 13465 |
# A7. Calculate SCALE. # |
| 13466 |
# SCALE is equal to 10^ISCALE, where ISCALE is the number # |
| 13467 |
# of decimal places needed to insure LEN integer digits # |
| 13468 |
# in the output before conversion to bcd. LAMBDA is the # |
| 13469 |
# sign of ISCALE, used in A9. Fp1 contains # |
| 13470 |
# 10^^(abs(ISCALE)) using a rounding mode which is a # |
| 13471 |
# function of the original rounding mode and the signs # |
| 13472 |
# of ISCALE and X. A table is given in the code. # |
| 13473 |
# # |
| 13474 |
# A8. Clr INEX; Force RZ. # |
| 13475 |
# The operation in A3 above may have set INEX2. # |
| 13476 |
# RZ mode is forced for the scaling operation to insure # |
| 13477 |
# only one rounding error. The grs bits are collected in # |
| 13478 |
# the INEX flag for use in A10. # |
| 13479 |
# # |
| 13480 |
# A9. Scale X -> Y. # |
| 13481 |
# The mantissa is scaled to the desired number of # |
| 13482 |
# significant digits. The excess digits are collected # |
| 13483 |
# in INEX2. # |
| 13484 |
# # |
| 13485 |
# A10. Or in INEX. # |
| 13486 |
# If INEX is set, round error occurred. This is # |
| 13487 |
# compensated for by 'or-ing' in the INEX2 flag to # |
| 13488 |
# the lsb of Y. # |
| 13489 |
# # |
| 13490 |
# A11. Restore original FPCR; set size ext. # |
| 13491 |
# Perform FINT operation in the user's rounding mode. # |
| 13492 |
# Keep the size to extended. # |
| 13493 |
# # |
| 13494 |
# A12. Calculate YINT = FINT(Y) according to user's rounding # |
| 13495 |
# mode. The FPSP routine sintd0 is used. The output # |
| 13496 |
# is in fp0. # |
| 13497 |
# # |
| 13498 |
# A13. Check for LEN digits. # |
| 13499 |
# If the int operation results in more than LEN digits, # |
| 13500 |
# or less than LEN -1 digits, adjust ILOG and repeat from # |
| 13501 |
# A6. This test occurs only on the first pass. If the # |
| 13502 |
# result is exactly 10^LEN, decrement ILOG and divide # |
| 13503 |
# the mantissa by 10. # |
| 13504 |
# # |
| 13505 |
# A14. Convert the mantissa to bcd. # |
| 13506 |
# The binstr routine is used to convert the LEN digit # |
| 13507 |
# mantissa to bcd in memory. The input to binstr is # |
| 13508 |
# to be a fraction; i.e. (mantissa)/10^LEN and adjusted # |
| 13509 |
# such that the decimal point is to the left of bit 63. # |
| 13510 |
# The bcd digits are stored in the correct position in # |
| 13511 |
# the final string area in memory. # |
| 13512 |
# # |
| 13513 |
# A15. Convert the exponent to bcd. # |
| 13514 |
# As in A14 above, the exp is converted to bcd and the # |
| 13515 |
# digits are stored in the final string. # |
| 13516 |
# Test the length of the final exponent string. If the # |
| 13517 |
# length is 4, set operr. # |
| 13518 |
# # |
| 13519 |
# A16. Write sign bits to final string. # |
| 13520 |
# # |
| 13521 |
######################################################################### |
| 13522 |
|
| 13523 |
set BINDEC_FLG, EXC_TEMP # DENORM flag |
| 13524 |
|
| 13525 |
# Constants in extended precision |
| 13526 |
PLOG2: |
| 13527 |
long 0x3FFD0000,0x9A209A84,0xFBCFF798,0x00000000 |
| 13528 |
PLOG2UP1: |
| 13529 |
long 0x3FFD0000,0x9A209A84,0xFBCFF799,0x00000000 |
| 13530 |
|
| 13531 |
# Constants in single precision |
| 13532 |
FONE: |
| 13533 |
long 0x3F800000,0x00000000,0x00000000,0x00000000 |
| 13534 |
FTWO: |
| 13535 |
long 0x40000000,0x00000000,0x00000000,0x00000000 |
| 13536 |
FTEN: |
| 13537 |
long 0x41200000,0x00000000,0x00000000,0x00000000 |
| 13538 |
F4933: |
| 13539 |
long 0x459A2800,0x00000000,0x00000000,0x00000000 |
| 13540 |
|
| 13541 |
RBDTBL: |
| 13542 |
byte 0,0,0,0 |
| 13543 |
byte 3,3,2,2 |
| 13544 |
byte 3,2,2,3 |
| 13545 |
byte 2,3,3,2 |
| 13546 |
|
| 13547 |
# Implementation Notes: |
| 13548 |
# |
| 13549 |
# The registers are used as follows: |
| 13550 |
# |
| 13551 |
# d0: scratch; LEN input to binstr |
| 13552 |
# d1: scratch |
| 13553 |
# d2: upper 32-bits of mantissa for binstr |
| 13554 |
# d3: scratch;lower 32-bits of mantissa for binstr |
| 13555 |
# d4: LEN |
| 13556 |
# d5: LAMBDA/ICTR |
| 13557 |
# d6: ILOG |
| 13558 |
# d7: k-factor |
| 13559 |
# a0: ptr for original operand/final result |
| 13560 |
# a1: scratch pointer |
| 13561 |
# a2: pointer to FP_X; abs(original value) in ext |
| 13562 |
# fp0: scratch |
| 13563 |
# fp1: scratch |
| 13564 |
# fp2: scratch |
| 13565 |
# F_SCR1: |
| 13566 |
# F_SCR2: |
| 13567 |
# L_SCR1: |
| 13568 |
# L_SCR2: |
| 13569 |
|
| 13570 |
global bindec |
| 13571 |
bindec: |
| 13572 |
movm.l &0x3f20,-(%sp) # {%d2-%d7/%a2} |
| 13573 |
fmovm.x &0x7,-(%sp) # {%fp0-%fp2} |
| 13574 |
|
| 13575 |
# A1. Set RM and size ext. Set SIGMA = sign input; |
| 13576 |
# The k-factor is saved for use in d7. Clear BINDEC_FLG for |
| 13577 |
# separating normalized/denormalized input. If the input |
| 13578 |
# is a denormalized number, set the BINDEC_FLG memory word |
| 13579 |
# to signal denorm. If the input is unnormalized, normalize |
| 13580 |
# the input and test for denormalized result. |
| 13581 |
# |
| 13582 |
fmov.l &rm_mode*0x10,%fpcr # set RM and ext |
| 13583 |
mov.l (%a0),L_SCR2(%a6) # save exponent for sign check |
| 13584 |
mov.l %d0,%d7 # move k-factor to d7 |
| 13585 |
|
| 13586 |
clr.b BINDEC_FLG(%a6) # clr norm/denorm flag |
| 13587 |
cmpi.b STAG(%a6),&DENORM # is input a DENORM? |
| 13588 |
bne.w A2_str # no; input is a NORM |
| 13589 |
|
| 13590 |
# |
| 13591 |
# Normalize the denorm |
| 13592 |
# |
| 13593 |
un_de_norm: |
| 13594 |
mov.w (%a0),%d0 |
| 13595 |
and.w &0x7fff,%d0 # strip sign of normalized exp |
| 13596 |
mov.l 4(%a0),%d1 |
| 13597 |
mov.l 8(%a0),%d2 |
| 13598 |
norm_loop: |
| 13599 |
sub.w &1,%d0 |
| 13600 |
lsl.l &1,%d2 |
| 13601 |
roxl.l &1,%d1 |
| 13602 |
tst.l %d1 |
| 13603 |
bge.b norm_loop |
| 13604 |
# |
| 13605 |
# Test if the normalized input is denormalized |
| 13606 |
# |
| 13607 |
tst.w %d0 |
| 13608 |
bgt.b pos_exp # if greater than zero, it is a norm |
| 13609 |
st BINDEC_FLG(%a6) # set flag for denorm |
| 13610 |
pos_exp: |
| 13611 |
and.w &0x7fff,%d0 # strip sign of normalized exp |
| 13612 |
mov.w %d0,(%a0) |
| 13613 |
mov.l %d1,4(%a0) |
| 13614 |
mov.l %d2,8(%a0) |
| 13615 |
|
| 13616 |
# A2. Set X = abs(input). |
| 13617 |
# |
| 13618 |
A2_str: |
| 13619 |
mov.l (%a0),FP_SCR1(%a6) # move input to work space |
| 13620 |
mov.l 4(%a0),FP_SCR1+4(%a6) # move input to work space |
| 13621 |
mov.l 8(%a0),FP_SCR1+8(%a6) # move input to work space |
| 13622 |
and.l &0x7fffffff,FP_SCR1(%a6) # create abs(X) |
| 13623 |
|
| 13624 |
# A3. Compute ILOG. |
| 13625 |
# ILOG is the log base 10 of the input value. It is approx- |
| 13626 |
# imated by adding e + 0.f when the original value is viewed |
| 13627 |
# as 2^^e * 1.f in extended precision. This value is stored |
| 13628 |
# in d6. |
| 13629 |
# |
| 13630 |
# Register usage: |
| 13631 |
# Input/Output |
| 13632 |
# d0: k-factor/exponent |
| 13633 |
# d2: x/x |
| 13634 |
# d3: x/x |
| 13635 |
# d4: x/x |
| 13636 |
# d5: x/x |
| 13637 |
# d6: x/ILOG |
| 13638 |
# d7: k-factor/Unchanged |
| 13639 |
# a0: ptr for original operand/final result |
| 13640 |
# a1: x/x |
| 13641 |
# a2: x/x |
| 13642 |
# fp0: x/float(ILOG) |
| 13643 |
# fp1: x/x |
| 13644 |
# fp2: x/x |
| 13645 |
# F_SCR1:x/x |
| 13646 |
# F_SCR2:Abs(X)/Abs(X) with $3fff exponent |
| 13647 |
# L_SCR1:x/x |
| 13648 |
# L_SCR2:first word of X packed/Unchanged |
| 13649 |
|
| 13650 |
tst.b BINDEC_FLG(%a6) # check for denorm |
| 13651 |
beq.b A3_cont # if clr, continue with norm |
| 13652 |
mov.l &-4933,%d6 # force ILOG = -4933 |
| 13653 |
bra.b A4_str |
| 13654 |
A3_cont: |
| 13655 |
mov.w FP_SCR1(%a6),%d0 # move exp to d0 |
| 13656 |
mov.w &0x3fff,FP_SCR1(%a6) # replace exponent with 0x3fff |
| 13657 |
fmov.x FP_SCR1(%a6),%fp0 # now fp0 has 1.f |
| 13658 |
sub.w &0x3fff,%d0 # strip off bias |
| 13659 |
fadd.w %d0,%fp0 # add in exp |
| 13660 |
fsub.s FONE(%pc),%fp0 # subtract off 1.0 |
| 13661 |
fbge.w pos_res # if pos, branch |
| 13662 |
fmul.x PLOG2UP1(%pc),%fp0 # if neg, mul by LOG2UP1 |
| 13663 |
fmov.l %fp0,%d6 # put ILOG in d6 as a lword |
| 13664 |
bra.b A4_str # go move out ILOG |
| 13665 |
pos_res: |
| 13666 |
fmul.x PLOG2(%pc),%fp0 # if pos, mul by LOG2 |
| 13667 |
fmov.l %fp0,%d6 # put ILOG in d6 as a lword |
| 13668 |
|
| 13669 |
|
| 13670 |
# A4. Clr INEX bit. |
| 13671 |
# The operation in A3 above may have set INEX2. |
| 13672 |
|
| 13673 |
A4_str: |
| 13674 |
fmov.l &0,%fpsr # zero all of fpsr - nothing needed |
| 13675 |
|
| 13676 |
|
| 13677 |
# A5. Set ICTR = 0; |
| 13678 |
# ICTR is a flag used in A13. It must be set before the |
| 13679 |
# loop entry A6. The lower word of d5 is used for ICTR. |
| 13680 |
|
| 13681 |
clr.w %d5 # clear ICTR |
| 13682 |
|
| 13683 |
# A6. Calculate LEN. |
| 13684 |
# LEN is the number of digits to be displayed. The k-factor |
| 13685 |
# can dictate either the total number of digits, if it is |
| 13686 |
# a positive number, or the number of digits after the |
| 13687 |
# original decimal point which are to be included as |
| 13688 |
# significant. See the 68882 manual for examples. |
| 13689 |
# If LEN is computed to be greater than 17, set OPERR in |
| 13690 |
# USER_FPSR. LEN is stored in d4. |
| 13691 |
# |
| 13692 |
# Register usage: |
| 13693 |
# Input/Output |
| 13694 |
# d0: exponent/Unchanged |
| 13695 |
# d2: x/x/scratch |
| 13696 |
# d3: x/x |
| 13697 |
# d4: exc picture/LEN |
| 13698 |
# d5: ICTR/Unchanged |
| 13699 |
# d6: ILOG/Unchanged |
| 13700 |
# d7: k-factor/Unchanged |
| 13701 |
# a0: ptr for original operand/final result |
| 13702 |
# a1: x/x |
| 13703 |
# a2: x/x |
| 13704 |
# fp0: float(ILOG)/Unchanged |
| 13705 |
# fp1: x/x |
| 13706 |
# fp2: x/x |
| 13707 |
# F_SCR1:x/x |
| 13708 |
# F_SCR2:Abs(X) with $3fff exponent/Unchanged |
| 13709 |
# L_SCR1:x/x |
| 13710 |
# L_SCR2:first word of X packed/Unchanged |
| 13711 |
|
| 13712 |
A6_str: |
| 13713 |
tst.l %d7 # branch on sign of k |
| 13714 |
ble.b k_neg # if k <= 0, LEN = ILOG + 1 - k |
| 13715 |
mov.l %d7,%d4 # if k > 0, LEN = k |
| 13716 |
bra.b len_ck # skip to LEN check |
| 13717 |
k_neg: |
| 13718 |
mov.l %d6,%d4 # first load ILOG to d4 |
| 13719 |
sub.l %d7,%d4 # subtract off k |
| 13720 |
addq.l &1,%d4 # add in the 1 |
| 13721 |
len_ck: |
| 13722 |
tst.l %d4 # LEN check: branch on sign of LEN |
| 13723 |
ble.b LEN_ng # if neg, set LEN = 1 |
| 13724 |
cmp.l %d4,&17 # test if LEN > 17 |
| 13725 |
ble.b A7_str # if not, forget it |
| 13726 |
mov.l &17,%d4 # set max LEN = 17 |
| 13727 |
tst.l %d7 # if negative, never set OPERR |
| 13728 |
ble.b A7_str # if positive, continue |
| 13729 |
or.l &opaop_mask,USER_FPSR(%a6) # set OPERR & AIOP in USER_FPSR |
| 13730 |
bra.b A7_str # finished here |
| 13731 |
LEN_ng: |
| 13732 |
mov.l &1,%d4 # min LEN is 1 |
| 13733 |
|
| 13734 |
|
| 13735 |
# A7. Calculate SCALE. |
| 13736 |
# SCALE is equal to 10^ISCALE, where ISCALE is the number |
| 13737 |
# of decimal places needed to insure LEN integer digits |
| 13738 |
# in the output before conversion to bcd. LAMBDA is the sign |
| 13739 |
# of ISCALE, used in A9. Fp1 contains 10^^(abs(ISCALE)) using |
| 13740 |
# the rounding mode as given in the following table (see |
| 13741 |
# Coonen, p. 7.23 as ref.; however, the SCALE variable is |
| 13742 |
# of opposite sign in bindec.sa from Coonen). |
| 13743 |
# |
| 13744 |
# Initial USE |
| 13745 |
# FPCR[6:5] LAMBDA SIGN(X) FPCR[6:5] |
| 13746 |
# ---------------------------------------------- |
| 13747 |
# RN 00 0 0 00/0 RN |
| 13748 |
# RN 00 0 1 00/0 RN |
| 13749 |
# RN 00 1 0 00/0 RN |
| 13750 |
# RN 00 1 1 00/0 RN |
| 13751 |
# RZ 01 0 0 11/3 RP |
| 13752 |
# RZ 01 0 1 11/3 RP |
| 13753 |
# RZ 01 1 0 10/2 RM |
| 13754 |
# RZ 01 1 1 10/2 RM |
| 13755 |
# RM 10 0 0 11/3 RP |
| 13756 |
# RM 10 0 1 10/2 RM |
| 13757 |
# RM 10 1 0 10/2 RM |
| 13758 |
# RM 10 1 1 11/3 RP |
| 13759 |
# RP 11 0 0 10/2 RM |
| 13760 |
# RP 11 0 1 11/3 RP |
| 13761 |
# RP 11 1 0 11/3 RP |
| 13762 |
# RP 11 1 1 10/2 RM |
| 13763 |
# |
| 13764 |
# Register usage: |
| 13765 |
# Input/Output |
| 13766 |
# d0: exponent/scratch - final is 0 |
| 13767 |
# d2: x/0 or 24 for A9 |
| 13768 |
# d3: x/scratch - offset ptr into PTENRM array |
| 13769 |
# d4: LEN/Unchanged |
| 13770 |
# d5: 0/ICTR:LAMBDA |
| 13771 |
# d6: ILOG/ILOG or k if ((k<=0)&(ILOG<k)) |
| 13772 |
# d7: k-factor/Unchanged |
| 13773 |
# a0: ptr for original operand/final result |
| 13774 |
# a1: x/ptr to PTENRM array |
| 13775 |
# a2: x/x |
| 13776 |
# fp0: float(ILOG)/Unchanged |
| 13777 |
# fp1: x/10^ISCALE |
| 13778 |
# fp2: x/x |
| 13779 |
# F_SCR1:x/x |
| 13780 |
# F_SCR2:Abs(X) with $3fff exponent/Unchanged |
| 13781 |
# L_SCR1:x/x |
| 13782 |
# L_SCR2:first word of X packed/Unchanged |
| 13783 |
|
| 13784 |
A7_str: |
| 13785 |
tst.l %d7 # test sign of k |
| 13786 |
bgt.b k_pos # if pos and > 0, skip this |
| 13787 |
cmp.l %d7,%d6 # test k - ILOG |
| 13788 |
blt.b k_pos # if ILOG >= k, skip this |
| 13789 |
mov.l %d7,%d6 # if ((k<0) & (ILOG < k)) ILOG = k |
| 13790 |
k_pos: |
| 13791 |
mov.l %d6,%d0 # calc ILOG + 1 - LEN in d0 |
| 13792 |
addq.l &1,%d0 # add the 1 |
| 13793 |
sub.l %d4,%d0 # sub off LEN |
| 13794 |
swap %d5 # use upper word of d5 for LAMBDA |
| 13795 |
clr.w %d5 # set it zero initially |
| 13796 |
clr.w %d2 # set up d2 for very small case |
| 13797 |
tst.l %d0 # test sign of ISCALE |
| 13798 |
bge.b iscale # if pos, skip next inst |
| 13799 |
addq.w &1,%d5 # if neg, set LAMBDA true |
| 13800 |
cmp.l %d0,&0xffffecd4 # test iscale <= -4908 |
| 13801 |
bgt.b no_inf # if false, skip rest |
| 13802 |
add.l &24,%d0 # add in 24 to iscale |
| 13803 |
mov.l &24,%d2 # put 24 in d2 for A9 |
| 13804 |
no_inf: |
| 13805 |
neg.l %d0 # and take abs of ISCALE |
| 13806 |
iscale: |
| 13807 |
fmov.s FONE(%pc),%fp1 # init fp1 to 1 |
| 13808 |
bfextu USER_FPCR(%a6){&26:&2},%d1 # get initial rmode bits |
| 13809 |
lsl.w &1,%d1 # put them in bits 2:1 |
| 13810 |
add.w %d5,%d1 # add in LAMBDA |
| 13811 |
lsl.w &1,%d1 # put them in bits 3:1 |
| 13812 |
tst.l L_SCR2(%a6) # test sign of original x |
| 13813 |
bge.b x_pos # if pos, don't set bit 0 |
| 13814 |
addq.l &1,%d1 # if neg, set bit 0 |
| 13815 |
x_pos: |
| 13816 |
lea.l RBDTBL(%pc),%a2 # load rbdtbl base |
| 13817 |
mov.b (%a2,%d1),%d3 # load d3 with new rmode |
| 13818 |
lsl.l &4,%d3 # put bits in proper position |
| 13819 |
fmov.l %d3,%fpcr # load bits into fpu |
| 13820 |
lsr.l &4,%d3 # put bits in proper position |
| 13821 |
tst.b %d3 # decode new rmode for pten table |
| 13822 |
bne.b not_rn # if zero, it is RN |
| 13823 |
lea.l PTENRN(%pc),%a1 # load a1 with RN table base |
| 13824 |
bra.b rmode # exit decode |
| 13825 |
not_rn: |
| 13826 |
lsr.b &1,%d3 # get lsb in carry |
| 13827 |
bcc.b not_rp2 # if carry clear, it is RM |
| 13828 |
lea.l PTENRP(%pc),%a1 # load a1 with RP table base |
| 13829 |
bra.b rmode # exit decode |
| 13830 |
not_rp2: |
| 13831 |
lea.l PTENRM(%pc),%a1 # load a1 with RM table base |
| 13832 |
rmode: |
| 13833 |
clr.l %d3 # clr table index |
| 13834 |
e_loop2: |
| 13835 |
lsr.l &1,%d0 # shift next bit into carry |
| 13836 |
bcc.b e_next2 # if zero, skip the mul |
| 13837 |
fmul.x (%a1,%d3),%fp1 # mul by 10**(d3_bit_no) |
| 13838 |
e_next2: |
| 13839 |
add.l &12,%d3 # inc d3 to next pwrten table entry |
| 13840 |
tst.l %d0 # test if ISCALE is zero |
| 13841 |
bne.b e_loop2 # if not, loop |
| 13842 |
|
| 13843 |
# A8. Clr INEX; Force RZ. |
| 13844 |
# The operation in A3 above may have set INEX2. |
| 13845 |
# RZ mode is forced for the scaling operation to insure |
| 13846 |
# only one rounding error. The grs bits are collected in |
| 13847 |
# the INEX flag for use in A10. |
| 13848 |
# |
| 13849 |
# Register usage: |
| 13850 |
# Input/Output |
| 13851 |
|
| 13852 |
fmov.l &0,%fpsr # clr INEX |
| 13853 |
fmov.l &rz_mode*0x10,%fpcr # set RZ rounding mode |
| 13854 |
|
| 13855 |
# A9. Scale X -> Y. |
| 13856 |
# The mantissa is scaled to the desired number of significant |
| 13857 |
# digits. The excess digits are collected in INEX2. If mul, |
| 13858 |
# Check d2 for excess 10 exponential value. If not zero, |
| 13859 |
# the iscale value would have caused the pwrten calculation |
| 13860 |
# to overflow. Only a negative iscale can cause this, so |
| 13861 |
# multiply by 10^(d2), which is now only allowed to be 24, |
| 13862 |
# with a multiply by 10^8 and 10^16, which is exact since |
| 13863 |
# 10^24 is exact. If the input was denormalized, we must |
| 13864 |
# create a busy stack frame with the mul command and the |
| 13865 |
# two operands, and allow the fpu to complete the multiply. |
| 13866 |
# |
| 13867 |
# Register usage: |
| 13868 |
# Input/Output |
| 13869 |
# d0: FPCR with RZ mode/Unchanged |
| 13870 |
# d2: 0 or 24/unchanged |
| 13871 |
# d3: x/x |
| 13872 |
# d4: LEN/Unchanged |
| 13873 |
# d5: ICTR:LAMBDA |
| 13874 |
# d6: ILOG/Unchanged |
| 13875 |
# d7: k-factor/Unchanged |
| 13876 |
# a0: ptr for original operand/final result |
| 13877 |
# a1: ptr to PTENRM array/Unchanged |
| 13878 |
# a2: x/x |
| 13879 |
# fp0: float(ILOG)/X adjusted for SCALE (Y) |
| 13880 |
# fp1: 10^ISCALE/Unchanged |
| 13881 |
# fp2: x/x |
| 13882 |
# F_SCR1:x/x |
| 13883 |
# F_SCR2:Abs(X) with $3fff exponent/Unchanged |
| 13884 |
# L_SCR1:x/x |
| 13885 |
# L_SCR2:first word of X packed/Unchanged |
| 13886 |
|
| 13887 |
A9_str: |
| 13888 |
fmov.x (%a0),%fp0 # load X from memory |
| 13889 |
fabs.x %fp0 # use abs(X) |
| 13890 |
tst.w %d5 # LAMBDA is in lower word of d5 |
| 13891 |
bne.b sc_mul # if neg (LAMBDA = 1), scale by mul |
| 13892 |
fdiv.x %fp1,%fp0 # calculate X / SCALE -> Y to fp0 |
| 13893 |
bra.w A10_st # branch to A10 |
| 13894 |
|
| 13895 |
sc_mul: |
| 13896 |
tst.b BINDEC_FLG(%a6) # check for denorm |
| 13897 |
beq.w A9_norm # if norm, continue with mul |
| 13898 |
|
| 13899 |
# for DENORM, we must calculate: |
| 13900 |
# fp0 = input_op * 10^ISCALE * 10^24 |
| 13901 |
# since the input operand is a DENORM, we can't multiply it directly. |
| 13902 |
# so, we do the multiplication of the exponents and mantissas separately. |
| 13903 |
# in this way, we avoid underflow on intermediate stages of the |
| 13904 |
# multiplication and guarantee a result without exception. |
| 13905 |
fmovm.x &0x2,-(%sp) # save 10^ISCALE to stack |
| 13906 |
|
| 13907 |
mov.w (%sp),%d3 # grab exponent |
| 13908 |
andi.w &0x7fff,%d3 # clear sign |
| 13909 |
ori.w &0x8000,(%a0) # make DENORM exp negative |
| 13910 |
add.w (%a0),%d3 # add DENORM exp to 10^ISCALE exp |
| 13911 |
subi.w &0x3fff,%d3 # subtract BIAS |
| 13912 |
add.w 36(%a1),%d3 |
| 13913 |
subi.w &0x3fff,%d3 # subtract BIAS |
| 13914 |
add.w 48(%a1),%d3 |
| 13915 |
subi.w &0x3fff,%d3 # subtract BIAS |
| 13916 |
|
| 13917 |
bmi.w sc_mul_err # is result is DENORM, punt!!! |
| 13918 |
|
| 13919 |
andi.w &0x8000,(%sp) # keep sign |
| 13920 |
or.w %d3,(%sp) # insert new exponent |
| 13921 |
andi.w &0x7fff,(%a0) # clear sign bit on DENORM again |
| 13922 |
mov.l 0x8(%a0),-(%sp) # put input op mantissa on stk |
| 13923 |
mov.l 0x4(%a0),-(%sp) |
| 13924 |
mov.l &0x3fff0000,-(%sp) # force exp to zero |
| 13925 |
fmovm.x (%sp)+,&0x80 # load normalized DENORM into fp0 |
| 13926 |
fmul.x (%sp)+,%fp0 |
| 13927 |
|
| 13928 |
# fmul.x 36(%a1),%fp0 # multiply fp0 by 10^8 |
| 13929 |
# fmul.x 48(%a1),%fp0 # multiply fp0 by 10^16 |
| 13930 |
mov.l 36+8(%a1),-(%sp) # get 10^8 mantissa |
| 13931 |
mov.l 36+4(%a1),-(%sp) |
| 13932 |
mov.l &0x3fff0000,-(%sp) # force exp to zero |
| 13933 |
mov.l 48+8(%a1),-(%sp) # get 10^16 mantissa |
| 13934 |
mov.l 48+4(%a1),-(%sp) |
| 13935 |
mov.l &0x3fff0000,-(%sp)# force exp to zero |
| 13936 |
fmul.x (%sp)+,%fp0 # multiply fp0 by 10^8 |
| 13937 |
fmul.x (%sp)+,%fp0 # multiply fp0 by 10^16 |
| 13938 |
bra.b A10_st |
| 13939 |
|
| 13940 |
sc_mul_err: |
| 13941 |
bra.b sc_mul_err |
| 13942 |
|
| 13943 |
A9_norm: |
| 13944 |
tst.w %d2 # test for small exp case |
| 13945 |
beq.b A9_con # if zero, continue as normal |
| 13946 |
fmul.x 36(%a1),%fp0 # multiply fp0 by 10^8 |
| 13947 |
fmul.x 48(%a1),%fp0 # multiply fp0 by 10^16 |
| 13948 |
A9_con: |
| 13949 |
fmul.x %fp1,%fp0 # calculate X * SCALE -> Y to fp0 |
| 13950 |
|
| 13951 |
# A10. Or in INEX. |
| 13952 |
# If INEX is set, round error occurred. This is compensated |
| 13953 |
# for by 'or-ing' in the INEX2 flag to the lsb of Y. |
| 13954 |
# |
| 13955 |
# Register usage: |
| 13956 |
# Input/Output |
| 13957 |
# d0: FPCR with RZ mode/FPSR with INEX2 isolated |
| 13958 |
# d2: x/x |
| 13959 |
# d3: x/x |
| 13960 |
# d4: LEN/Unchanged |
| 13961 |
# d5: ICTR:LAMBDA |
| 13962 |
# d6: ILOG/Unchanged |
| 13963 |
# d7: k-factor/Unchanged |
| 13964 |
# a0: ptr for original operand/final result |
| 13965 |
# a1: ptr to PTENxx array/Unchanged |
| 13966 |
# a2: x/ptr to FP_SCR1(a6) |
| 13967 |
# fp0: Y/Y with lsb adjusted |
| 13968 |
# fp1: 10^ISCALE/Unchanged |
| 13969 |
# fp2: x/x |
| 13970 |
|
| 13971 |
A10_st: |
| 13972 |
fmov.l %fpsr,%d0 # get FPSR |
| 13973 |
fmov.x %fp0,FP_SCR1(%a6) # move Y to memory |
| 13974 |
lea.l FP_SCR1(%a6),%a2 # load a2 with ptr to FP_SCR1 |
| 13975 |
btst &9,%d0 # check if INEX2 set |
| 13976 |
beq.b A11_st # if clear, skip rest |
| 13977 |
or.l &1,8(%a2) # or in 1 to lsb of mantissa |
| 13978 |
fmov.x FP_SCR1(%a6),%fp0 # write adjusted Y back to fpu |
| 13979 |
|
| 13980 |
|
| 13981 |
# A11. Restore original FPCR; set size ext. |
| 13982 |
# Perform FINT operation in the user's rounding mode. Keep |
| 13983 |
# the size to extended. The sintdo entry point in the sint |
| 13984 |
# routine expects the FPCR value to be in USER_FPCR for |
| 13985 |
# mode and precision. The original FPCR is saved in L_SCR1. |
| 13986 |
|
| 13987 |
A11_st: |
| 13988 |
mov.l USER_FPCR(%a6),L_SCR1(%a6) # save it for later |
| 13989 |
and.l &0x00000030,USER_FPCR(%a6) # set size to ext, |
| 13990 |
# ;block exceptions |
| 13991 |
|
| 13992 |
|
| 13993 |
# A12. Calculate YINT = FINT(Y) according to user's rounding mode. |
| 13994 |
# The FPSP routine sintd0 is used. The output is in fp0. |
| 13995 |
# |
| 13996 |
# Register usage: |
| 13997 |
# Input/Output |
| 13998 |
# d0: FPSR with AINEX cleared/FPCR with size set to ext |
| 13999 |
# d2: x/x/scratch |
| 14000 |
# d3: x/x |
| 14001 |
# d4: LEN/Unchanged |
| 14002 |
# d5: ICTR:LAMBDA/Unchanged |
| 14003 |
# d6: ILOG/Unchanged |
| 14004 |
# d7: k-factor/Unchanged |
| 14005 |
# a0: ptr for original operand/src ptr for sintdo |
| 14006 |
# a1: ptr to PTENxx array/Unchanged |
| 14007 |
# a2: ptr to FP_SCR1(a6)/Unchanged |
| 14008 |
# a6: temp pointer to FP_SCR1(a6) - orig value saved and restored |
| 14009 |
# fp0: Y/YINT |
| 14010 |
# fp1: 10^ISCALE/Unchanged |
| 14011 |
# fp2: x/x |
| 14012 |
# F_SCR1:x/x |
| 14013 |
# F_SCR2:Y adjusted for inex/Y with original exponent |
| 14014 |
# L_SCR1:x/original USER_FPCR |
| 14015 |
# L_SCR2:first word of X packed/Unchanged |
| 14016 |
|
| 14017 |
A12_st: |
| 14018 |
movm.l &0xc0c0,-(%sp) # save regs used by sintd0 {%d0-%d1/%a0-%a1} |
| 14019 |
mov.l L_SCR1(%a6),-(%sp) |
| 14020 |
mov.l L_SCR2(%a6),-(%sp) |
| 14021 |
|
| 14022 |
lea.l FP_SCR1(%a6),%a0 # a0 is ptr to FP_SCR1(a6) |
| 14023 |
fmov.x %fp0,(%a0) # move Y to memory at FP_SCR1(a6) |
| 14024 |
tst.l L_SCR2(%a6) # test sign of original operand |
| 14025 |
bge.b do_fint12 # if pos, use Y |
| 14026 |
or.l &0x80000000,(%a0) # if neg, use -Y |
| 14027 |
do_fint12: |
| 14028 |
mov.l USER_FPSR(%a6),-(%sp) |
| 14029 |
# bsr sintdo # sint routine returns int in fp0 |
| 14030 |
|
| 14031 |
fmov.l USER_FPCR(%a6),%fpcr |
| 14032 |
fmov.l &0x0,%fpsr # clear the AEXC bits!!! |
| 14033 |
## mov.l USER_FPCR(%a6),%d0 # ext prec/keep rnd mode |
| 14034 |
## andi.l &0x00000030,%d0 |
| 14035 |
## fmov.l %d0,%fpcr |
| 14036 |
fint.x FP_SCR1(%a6),%fp0 # do fint() |
| 14037 |
fmov.l %fpsr,%d0 |
| 14038 |
or.w %d0,FPSR_EXCEPT(%a6) |
| 14039 |
## fmov.l &0x0,%fpcr |
| 14040 |
## fmov.l %fpsr,%d0 # don't keep ccodes |
| 14041 |
## or.w %d0,FPSR_EXCEPT(%a6) |
| 14042 |
|
| 14043 |
mov.b (%sp),USER_FPSR(%a6) |
| 14044 |
add.l &4,%sp |
| 14045 |
|
| 14046 |
mov.l (%sp)+,L_SCR2(%a6) |
| 14047 |
mov.l (%sp)+,L_SCR1(%a6) |
| 14048 |
movm.l (%sp)+,&0x303 # restore regs used by sint {%d0-%d1/%a0-%a1} |
| 14049 |
|
| 14050 |
mov.l L_SCR2(%a6),FP_SCR1(%a6) # restore original exponent |
| 14051 |
mov.l L_SCR1(%a6),USER_FPCR(%a6) # restore user's FPCR |
| 14052 |
|
| 14053 |
# A13. Check for LEN digits. |
| 14054 |
# If the int operation results in more than LEN digits, |
| 14055 |
# or less than LEN -1 digits, adjust ILOG and repeat from |
| 14056 |
# A6. This test occurs only on the first pass. If the |
| 14057 |
# result is exactly 10^LEN, decrement ILOG and divide |
| 14058 |
# the mantissa by 10. The calculation of 10^LEN cannot |
| 14059 |
# be inexact, since all powers of ten up to 10^27 are exact |
| 14060 |
# in extended precision, so the use of a previous power-of-ten |
| 14061 |
# table will introduce no error. |
| 14062 |
# |
| 14063 |
# |
| 14064 |
# Register usage: |
| 14065 |
# Input/Output |
| 14066 |
# d0: FPCR with size set to ext/scratch final = 0 |
| 14067 |
# d2: x/x |
| 14068 |
# d3: x/scratch final = x |
| 14069 |
# d4: LEN/LEN adjusted |
| 14070 |
# d5: ICTR:LAMBDA/LAMBDA:ICTR |
| 14071 |
# d6: ILOG/ILOG adjusted |
| 14072 |
# d7: k-factor/Unchanged |
| 14073 |
# a0: pointer into memory for packed bcd string formation |
| 14074 |
# a1: ptr to PTENxx array/Unchanged |
| 14075 |
# a2: ptr to FP_SCR1(a6)/Unchanged |
| 14076 |
# fp0: int portion of Y/abs(YINT) adjusted |
| 14077 |
# fp1: 10^ISCALE/Unchanged |
| 14078 |
# fp2: x/10^LEN |
| 14079 |
# F_SCR1:x/x |
| 14080 |
# F_SCR2:Y with original exponent/Unchanged |
| 14081 |
# L_SCR1:original USER_FPCR/Unchanged |
| 14082 |
# L_SCR2:first word of X packed/Unchanged |
| 14083 |
|
| 14084 |
A13_st: |
| 14085 |
swap %d5 # put ICTR in lower word of d5 |
| 14086 |
tst.w %d5 # check if ICTR = 0 |
| 14087 |
bne not_zr # if non-zero, go to second test |
| 14088 |
# |
| 14089 |
# Compute 10^(LEN-1) |
| 14090 |
# |
| 14091 |
fmov.s FONE(%pc),%fp2 # init fp2 to 1.0 |
| 14092 |
mov.l %d4,%d0 # put LEN in d0 |
| 14093 |
subq.l &1,%d0 # d0 = LEN -1 |
| 14094 |
clr.l %d3 # clr table index |
| 14095 |
l_loop: |
| 14096 |
lsr.l &1,%d0 # shift next bit into carry |
| 14097 |
bcc.b l_next # if zero, skip the mul |
| 14098 |
fmul.x (%a1,%d3),%fp2 # mul by 10**(d3_bit_no) |
| 14099 |
l_next: |
| 14100 |
add.l &12,%d3 # inc d3 to next pwrten table entry |
| 14101 |
tst.l %d0 # test if LEN is zero |
| 14102 |
bne.b l_loop # if not, loop |
| 14103 |
# |
| 14104 |
# 10^LEN-1 is computed for this test and A14. If the input was |
| 14105 |
# denormalized, check only the case in which YINT > 10^LEN. |
| 14106 |
# |
| 14107 |
tst.b BINDEC_FLG(%a6) # check if input was norm |
| 14108 |
beq.b A13_con # if norm, continue with checking |
| 14109 |
fabs.x %fp0 # take abs of YINT |
| 14110 |
bra test_2 |
| 14111 |
# |
| 14112 |
# Compare abs(YINT) to 10^(LEN-1) and 10^LEN |
| 14113 |
# |
| 14114 |
A13_con: |
| 14115 |
fabs.x %fp0 # take abs of YINT |
| 14116 |
fcmp.x %fp0,%fp2 # compare abs(YINT) with 10^(LEN-1) |
| 14117 |
fbge.w test_2 # if greater, do next test |
| 14118 |
subq.l &1,%d6 # subtract 1 from ILOG |
| 14119 |
mov.w &1,%d5 # set ICTR |
| 14120 |
fmov.l &rm_mode*0x10,%fpcr # set rmode to RM |
| 14121 |
fmul.s FTEN(%pc),%fp2 # compute 10^LEN |
| 14122 |
bra.w A6_str # return to A6 and recompute YINT |
| 14123 |
test_2: |
| 14124 |
fmul.s FTEN(%pc),%fp2 # compute 10^LEN |
| 14125 |
fcmp.x %fp0,%fp2 # compare abs(YINT) with 10^LEN |
| 14126 |
fblt.w A14_st # if less, all is ok, go to A14 |
| 14127 |
fbgt.w fix_ex # if greater, fix and redo |
| 14128 |
fdiv.s FTEN(%pc),%fp0 # if equal, divide by 10 |
| 14129 |
addq.l &1,%d6 # and inc ILOG |
| 14130 |
bra.b A14_st # and continue elsewhere |
| 14131 |
fix_ex: |
| 14132 |
addq.l &1,%d6 # increment ILOG by 1 |
| 14133 |
mov.w &1,%d5 # set ICTR |
| 14134 |
fmov.l &rm_mode*0x10,%fpcr # set rmode to RM |
| 14135 |
bra.w A6_str # return to A6 and recompute YINT |
| 14136 |
# |
| 14137 |
# Since ICTR <> 0, we have already been through one adjustment, |
| 14138 |
# and shouldn't have another; this is to check if abs(YINT) = 10^LEN |
| 14139 |
# 10^LEN is again computed using whatever table is in a1 since the |
| 14140 |
# value calculated cannot be inexact. |
| 14141 |
# |
| 14142 |
not_zr: |
| 14143 |
fmov.s FONE(%pc),%fp2 # init fp2 to 1.0 |
| 14144 |
mov.l %d4,%d0 # put LEN in d0 |
| 14145 |
clr.l %d3 # clr table index |
| 14146 |
z_loop: |
| 14147 |
lsr.l &1,%d0 # shift next bit into carry |
| 14148 |
bcc.b z_next # if zero, skip the mul |
| 14149 |
fmul.x (%a1,%d3),%fp2 # mul by 10**(d3_bit_no) |
| 14150 |
z_next: |
| 14151 |
add.l &12,%d3 # inc d3 to next pwrten table entry |
| 14152 |
tst.l %d0 # test if LEN is zero |
| 14153 |
bne.b z_loop # if not, loop |
| 14154 |
fabs.x %fp0 # get abs(YINT) |
| 14155 |
fcmp.x %fp0,%fp2 # check if abs(YINT) = 10^LEN |
| 14156 |
fbneq.w A14_st # if not, skip this |
| 14157 |
fdiv.s FTEN(%pc),%fp0 # divide abs(YINT) by 10 |
| 14158 |
addq.l &1,%d6 # and inc ILOG by 1 |
| 14159 |
addq.l &1,%d4 # and inc LEN |
| 14160 |
fmul.s FTEN(%pc),%fp2 # if LEN++, the get 10^^LEN |
| 14161 |
|
| 14162 |
# A14. Convert the mantissa to bcd. |
| 14163 |
# The binstr routine is used to convert the LEN digit |
| 14164 |
# mantissa to bcd in memory. The input to binstr is |
| 14165 |
# to be a fraction; i.e. (mantissa)/10^LEN and adjusted |
| 14166 |
# such that the decimal point is to the left of bit 63. |
| 14167 |
# The bcd digits are stored in the correct position in |
| 14168 |
# the final string area in memory. |
| 14169 |
# |
| 14170 |
# |
| 14171 |
# Register usage: |
| 14172 |
# Input/Output |
| 14173 |
# d0: x/LEN call to binstr - final is 0 |
| 14174 |
# d1: x/0 |
| 14175 |
# d2: x/ms 32-bits of mant of abs(YINT) |
| 14176 |
# d3: x/ls 32-bits of mant of abs(YINT) |
| 14177 |
# d4: LEN/Unchanged |
| 14178 |
# d5: ICTR:LAMBDA/LAMBDA:ICTR |
| 14179 |
# d6: ILOG |
| 14180 |
# d7: k-factor/Unchanged |
| 14181 |
# a0: pointer into memory for packed bcd string formation |
| 14182 |
# /ptr to first mantissa byte in result string |
| 14183 |
# a1: ptr to PTENxx array/Unchanged |
| 14184 |
# a2: ptr to FP_SCR1(a6)/Unchanged |
| 14185 |
# fp0: int portion of Y/abs(YINT) adjusted |
| 14186 |
# fp1: 10^ISCALE/Unchanged |
| 14187 |
# fp2: 10^LEN/Unchanged |
| 14188 |
# F_SCR1:x/Work area for final result |
| 14189 |
# F_SCR2:Y with original exponent/Unchanged |
| 14190 |
# L_SCR1:original USER_FPCR/Unchanged |
| 14191 |
# L_SCR2:first word of X packed/Unchanged |
| 14192 |
|
| 14193 |
A14_st: |
| 14194 |
fmov.l &rz_mode*0x10,%fpcr # force rz for conversion |
| 14195 |
fdiv.x %fp2,%fp0 # divide abs(YINT) by 10^LEN |
| 14196 |
lea.l FP_SCR0(%a6),%a0 |
| 14197 |
fmov.x %fp0,(%a0) # move abs(YINT)/10^LEN to memory |
| 14198 |
mov.l 4(%a0),%d2 # move 2nd word of FP_RES to d2 |
| 14199 |
mov.l 8(%a0),%d3 # move 3rd word of FP_RES to d3 |
| 14200 |
clr.l 4(%a0) # zero word 2 of FP_RES |
| 14201 |
clr.l 8(%a0) # zero word 3 of FP_RES |
| 14202 |
mov.l (%a0),%d0 # move exponent to d0 |
| 14203 |
swap %d0 # put exponent in lower word |
| 14204 |
beq.b no_sft # if zero, don't shift |
| 14205 |
sub.l &0x3ffd,%d0 # sub bias less 2 to make fract |
| 14206 |
tst.l %d0 # check if > 1 |
| 14207 |
bgt.b no_sft # if so, don't shift |
| 14208 |
neg.l %d0 # make exp positive |
| 14209 |
m_loop: |
| 14210 |
lsr.l &1,%d2 # shift d2:d3 right, add 0s |
| 14211 |
roxr.l &1,%d3 # the number of places |
| 14212 |
dbf.w %d0,m_loop # given in d0 |
| 14213 |
no_sft: |
| 14214 |
tst.l %d2 # check for mantissa of zero |
| 14215 |
bne.b no_zr # if not, go on |
| 14216 |
tst.l %d3 # continue zero check |
| 14217 |
beq.b zer_m # if zero, go directly to binstr |
| 14218 |
no_zr: |
| 14219 |
clr.l %d1 # put zero in d1 for addx |
| 14220 |
add.l &0x00000080,%d3 # inc at bit 7 |
| 14221 |
addx.l %d1,%d2 # continue inc |
| 14222 |
and.l &0xffffff80,%d3 # strip off lsb not used by 882 |
| 14223 |
zer_m: |
| 14224 |
mov.l %d4,%d0 # put LEN in d0 for binstr call |
| 14225 |
addq.l &3,%a0 # a0 points to M16 byte in result |
| 14226 |
bsr binstr # call binstr to convert mant |
| 14227 |
|
| 14228 |
|
| 14229 |
# A15. Convert the exponent to bcd. |
| 14230 |
# As in A14 above, the exp is converted to bcd and the |
| 14231 |
# digits are stored in the final string. |
| 14232 |
# |
| 14233 |
# Digits are stored in L_SCR1(a6) on return from BINDEC as: |
| 14234 |
# |
| 14235 |
# 32 16 15 0 |
| 14236 |
# ----------------------------------------- |
| 14237 |
# | 0 | e3 | e2 | e1 | e4 | X | X | X | |
| 14238 |
# ----------------------------------------- |
| 14239 |
# |
| 14240 |
# And are moved into their proper places in FP_SCR0. If digit e4 |
| 14241 |
# is non-zero, OPERR is signaled. In all cases, all 4 digits are |
| 14242 |
# written as specified in the 881/882 manual for packed decimal. |
| 14243 |
# |
| 14244 |
# Register usage: |
| 14245 |
# Input/Output |
| 14246 |
# d0: x/LEN call to binstr - final is 0 |
| 14247 |
# d1: x/scratch (0);shift count for final exponent packing |
| 14248 |
# d2: x/ms 32-bits of exp fraction/scratch |
| 14249 |
# d3: x/ls 32-bits of exp fraction |
| 14250 |
# d4: LEN/Unchanged |
| 14251 |
# d5: ICTR:LAMBDA/LAMBDA:ICTR |
| 14252 |
# d6: ILOG |
| 14253 |
# d7: k-factor/Unchanged |
| 14254 |
# a0: ptr to result string/ptr to L_SCR1(a6) |
| 14255 |
# a1: ptr to PTENxx array/Unchanged |
| 14256 |
# a2: ptr to FP_SCR1(a6)/Unchanged |
| 14257 |
# fp0: abs(YINT) adjusted/float(ILOG) |
| 14258 |
# fp1: 10^ISCALE/Unchanged |
| 14259 |
# fp2: 10^LEN/Unchanged |
| 14260 |
# F_SCR1:Work area for final result/BCD result |
| 14261 |
# F_SCR2:Y with original exponent/ILOG/10^4 |
| 14262 |
# L_SCR1:original USER_FPCR/Exponent digits on return from binstr |
| 14263 |
# L_SCR2:first word of X packed/Unchanged |
| 14264 |
|
| 14265 |
A15_st: |
| 14266 |
tst.b BINDEC_FLG(%a6) # check for denorm |
| 14267 |
beq.b not_denorm |
| 14268 |
ftest.x %fp0 # test for zero |
| 14269 |
fbeq.w den_zero # if zero, use k-factor or 4933 |
| 14270 |
fmov.l %d6,%fp0 # float ILOG |
| 14271 |
fabs.x %fp0 # get abs of ILOG |
| 14272 |
bra.b convrt |
| 14273 |
den_zero: |
| 14274 |
tst.l %d7 # check sign of the k-factor |
| 14275 |
blt.b use_ilog # if negative, use ILOG |
| 14276 |
fmov.s F4933(%pc),%fp0 # force exponent to 4933 |
| 14277 |
bra.b convrt # do it |
| 14278 |
use_ilog: |
| 14279 |
fmov.l %d6,%fp0 # float ILOG |
| 14280 |
fabs.x %fp0 # get abs of ILOG |
| 14281 |
bra.b convrt |
| 14282 |
not_denorm: |
| 14283 |
ftest.x %fp0 # test for zero |
| 14284 |
fbneq.w not_zero # if zero, force exponent |
| 14285 |
fmov.s FONE(%pc),%fp0 # force exponent to 1 |
| 14286 |
bra.b convrt # do it |
| 14287 |
not_zero: |
| 14288 |
fmov.l %d6,%fp0 # float ILOG |
| 14289 |
fabs.x %fp0 # get abs of ILOG |
| 14290 |
convrt: |
| 14291 |
fdiv.x 24(%a1),%fp0 # compute ILOG/10^4 |
| 14292 |
fmov.x %fp0,FP_SCR1(%a6) # store fp0 in memory |
| 14293 |
mov.l 4(%a2),%d2 # move word 2 to d2 |
| 14294 |
mov.l 8(%a2),%d3 # move word 3 to d3 |
| 14295 |
mov.w (%a2),%d0 # move exp to d0 |
| 14296 |
beq.b x_loop_fin # if zero, skip the shift |
| 14297 |
sub.w &0x3ffd,%d0 # subtract off bias |
| 14298 |
neg.w %d0 # make exp positive |
| 14299 |
x_loop: |
| 14300 |
lsr.l &1,%d2 # shift d2:d3 right |
| 14301 |
roxr.l &1,%d3 # the number of places |
| 14302 |
dbf.w %d0,x_loop # given in d0 |
| 14303 |
x_loop_fin: |
| 14304 |
clr.l %d1 # put zero in d1 for addx |
| 14305 |
add.l &0x00000080,%d3 # inc at bit 6 |
| 14306 |
addx.l %d1,%d2 # continue inc |
| 14307 |
and.l &0xffffff80,%d3 # strip off lsb not used by 882 |
| 14308 |
mov.l &4,%d0 # put 4 in d0 for binstr call |
| 14309 |
lea.l L_SCR1(%a6),%a0 # a0 is ptr to L_SCR1 for exp digits |
| 14310 |
bsr binstr # call binstr to convert exp |
| 14311 |
mov.l L_SCR1(%a6),%d0 # load L_SCR1 lword to d0 |
| 14312 |
mov.l &12,%d1 # use d1 for shift count |
| 14313 |
lsr.l %d1,%d0 # shift d0 right by 12 |
| 14314 |
bfins %d0,FP_SCR0(%a6){&4:&12} # put e3:e2:e1 in FP_SCR0 |
| 14315 |
lsr.l %d1,%d0 # shift d0 right by 12 |
| 14316 |
bfins %d0,FP_SCR0(%a6){&16:&4} # put e4 in FP_SCR0 |
| 14317 |
tst.b %d0 # check if e4 is zero |
| 14318 |
beq.b A16_st # if zero, skip rest |
| 14319 |
or.l &opaop_mask,USER_FPSR(%a6) # set OPERR & AIOP in USER_FPSR |
| 14320 |
|
| 14321 |
|
| 14322 |
# A16. Write sign bits to final string. |
| 14323 |
# Sigma is bit 31 of initial value; RHO is bit 31 of d6 (ILOG). |
| 14324 |
# |
| 14325 |
# Register usage: |
| 14326 |
# Input/Output |
| 14327 |
# d0: x/scratch - final is x |
| 14328 |
# d2: x/x |
| 14329 |
# d3: x/x |
| 14330 |
# d4: LEN/Unchanged |
| 14331 |
# d5: ICTR:LAMBDA/LAMBDA:ICTR |
| 14332 |
# d6: ILOG/ILOG adjusted |
| 14333 |
# d7: k-factor/Unchanged |
| 14334 |
# a0: ptr to L_SCR1(a6)/Unchanged |
| 14335 |
# a1: ptr to PTENxx array/Unchanged |
| 14336 |
# a2: ptr to FP_SCR1(a6)/Unchanged |
| 14337 |
# fp0: float(ILOG)/Unchanged |
| 14338 |
# fp1: 10^ISCALE/Unchanged |
| 14339 |
# fp2: 10^LEN/Unchanged |
| 14340 |
# F_SCR1:BCD result with correct signs |
| 14341 |
# F_SCR2:ILOG/10^4 |
| 14342 |
# L_SCR1:Exponent digits on return from binstr |
| 14343 |
# L_SCR2:first word of X packed/Unchanged |
| 14344 |
|
| 14345 |
A16_st: |
| 14346 |
clr.l %d0 # clr d0 for collection of signs |
| 14347 |
and.b &0x0f,FP_SCR0(%a6) # clear first nibble of FP_SCR0 |
| 14348 |
tst.l L_SCR2(%a6) # check sign of original mantissa |
| 14349 |
bge.b mant_p # if pos, don't set SM |
| 14350 |
mov.l &2,%d0 # move 2 in to d0 for SM |
| 14351 |
mant_p: |
| 14352 |
tst.l %d6 # check sign of ILOG |
| 14353 |
bge.b wr_sgn # if pos, don't set SE |
| 14354 |
addq.l &1,%d0 # set bit 0 in d0 for SE |
| 14355 |
wr_sgn: |
| 14356 |
bfins %d0,FP_SCR0(%a6){&0:&2} # insert SM and SE into FP_SCR0 |
| 14357 |
|
| 14358 |
# Clean up and restore all registers used. |
| 14359 |
|
| 14360 |
fmov.l &0,%fpsr # clear possible inex2/ainex bits |
| 14361 |
fmovm.x (%sp)+,&0xe0 # {%fp0-%fp2} |
| 14362 |
movm.l (%sp)+,&0x4fc # {%d2-%d7/%a2} |
| 14363 |
rts |
| 14364 |
|
| 14365 |
global PTENRN |
| 14366 |
PTENRN: |
| 14367 |
long 0x40020000,0xA0000000,0x00000000 # 10 ^ 1 |
| 14368 |
long 0x40050000,0xC8000000,0x00000000 # 10 ^ 2 |
| 14369 |
long 0x400C0000,0x9C400000,0x00000000 # 10 ^ 4 |
| 14370 |
long 0x40190000,0xBEBC2000,0x00000000 # 10 ^ 8 |
| 14371 |
long 0x40340000,0x8E1BC9BF,0x04000000 # 10 ^ 16 |
| 14372 |
long 0x40690000,0x9DC5ADA8,0x2B70B59E # 10 ^ 32 |
| 14373 |
long 0x40D30000,0xC2781F49,0xFFCFA6D5 # 10 ^ 64 |
| 14374 |
long 0x41A80000,0x93BA47C9,0x80E98CE0 # 10 ^ 128 |
| 14375 |
long 0x43510000,0xAA7EEBFB,0x9DF9DE8E # 10 ^ 256 |
| 14376 |
long 0x46A30000,0xE319A0AE,0xA60E91C7 # 10 ^ 512 |
| 14377 |
long 0x4D480000,0xC9767586,0x81750C17 # 10 ^ 1024 |
| 14378 |
long 0x5A920000,0x9E8B3B5D,0xC53D5DE5 # 10 ^ 2048 |
| 14379 |
long 0x75250000,0xC4605202,0x8A20979B # 10 ^ 4096 |
| 14380 |
|
| 14381 |
global PTENRP |
| 14382 |
PTENRP: |
| 14383 |
long 0x40020000,0xA0000000,0x00000000 # 10 ^ 1 |
| 14384 |
long 0x40050000,0xC8000000,0x00000000 # 10 ^ 2 |
| 14385 |
long 0x400C0000,0x9C400000,0x00000000 # 10 ^ 4 |
| 14386 |
long 0x40190000,0xBEBC2000,0x00000000 # 10 ^ 8 |
| 14387 |
long 0x40340000,0x8E1BC9BF,0x04000000 # 10 ^ 16 |
| 14388 |
long 0x40690000,0x9DC5ADA8,0x2B70B59E # 10 ^ 32 |
| 14389 |
long 0x40D30000,0xC2781F49,0xFFCFA6D6 # 10 ^ 64 |
| 14390 |
long 0x41A80000,0x93BA47C9,0x80E98CE0 # 10 ^ 128 |
| 14391 |
long 0x43510000,0xAA7EEBFB,0x9DF9DE8E # 10 ^ 256 |
| 14392 |
long 0x46A30000,0xE319A0AE,0xA60E91C7 # 10 ^ 512 |
| 14393 |
long 0x4D480000,0xC9767586,0x81750C18 # 10 ^ 1024 |
| 14394 |
long 0x5A920000,0x9E8B3B5D,0xC53D5DE5 # 10 ^ 2048 |
| 14395 |
long 0x75250000,0xC4605202,0x8A20979B # 10 ^ 4096 |
| 14396 |
|
| 14397 |
global PTENRM |
| 14398 |
PTENRM: |
| 14399 |
long 0x40020000,0xA0000000,0x00000000 # 10 ^ 1 |
| 14400 |
long 0x40050000,0xC8000000,0x00000000 # 10 ^ 2 |
| 14401 |
long 0x400C0000,0x9C400000,0x00000000 # 10 ^ 4 |
| 14402 |
long 0x40190000,0xBEBC2000,0x00000000 # 10 ^ 8 |
| 14403 |
long 0x40340000,0x8E1BC9BF,0x04000000 # 10 ^ 16 |
| 14404 |
long 0x40690000,0x9DC5ADA8,0x2B70B59D # 10 ^ 32 |
| 14405 |
long 0x40D30000,0xC2781F49,0xFFCFA6D5 # 10 ^ 64 |
| 14406 |
long 0x41A80000,0x93BA47C9,0x80E98CDF # 10 ^ 128 |
| 14407 |
long 0x43510000,0xAA7EEBFB,0x9DF9DE8D # 10 ^ 256 |
| 14408 |
long 0x46A30000,0xE319A0AE,0xA60E91C6 # 10 ^ 512 |
| 14409 |
long 0x4D480000,0xC9767586,0x81750C17 # 10 ^ 1024 |
| 14410 |
long 0x5A920000,0x9E8B3B5D,0xC53D5DE4 # 10 ^ 2048 |
| 14411 |
long 0x75250000,0xC4605202,0x8A20979A # 10 ^ 4096 |
| 14412 |
|
| 14413 |
######################################################################### |
| 14414 |
# binstr(): Converts a 64-bit binary integer to bcd. # |
| 14415 |
# # |
| 14416 |
# INPUT *************************************************************** # |
| 14417 |
# d2:d3 = 64-bit binary integer # |
| 14418 |
# d0 = desired length (LEN) # |
| 14419 |
# a0 = pointer to start in memory for bcd characters # |
| 14420 |
# (This pointer must point to byte 4 of the first # |
| 14421 |
# lword of the packed decimal memory string.) # |
| 14422 |
# # |
| 14423 |
# OUTPUT ************************************************************** # |
| 14424 |
# a0 = pointer to LEN bcd digits representing the 64-bit integer. # |
| 14425 |
# # |
| 14426 |
# ALGORITHM *********************************************************** # |
| 14427 |
# The 64-bit binary is assumed to have a decimal point before # |
| 14428 |
# bit 63. The fraction is multiplied by 10 using a mul by 2 # |
| 14429 |
# shift and a mul by 8 shift. The bits shifted out of the # |
| 14430 |
# msb form a decimal digit. This process is iterated until # |
| 14431 |
# LEN digits are formed. # |
| 14432 |
# # |
| 14433 |
# A1. Init d7 to 1. D7 is the byte digit counter, and if 1, the # |
| 14434 |
# digit formed will be assumed the least significant. This is # |
| 14435 |
# to force the first byte formed to have a 0 in the upper 4 bits. # |
| 14436 |
# # |
| 14437 |
# A2. Beginning of the loop: # |
| 14438 |
# Copy the fraction in d2:d3 to d4:d5. # |
| 14439 |
# # |
| 14440 |
# A3. Multiply the fraction in d2:d3 by 8 using bit-field # |
| 14441 |
# extracts and shifts. The three msbs from d2 will go into d1. # |
| 14442 |
# # |
| 14443 |
# A4. Multiply the fraction in d4:d5 by 2 using shifts. The msb # |
| 14444 |
# will be collected by the carry. # |
| 14445 |
# # |
| 14446 |
# A5. Add using the carry the 64-bit quantities in d2:d3 and d4:d5 # |
| 14447 |
# into d2:d3. D1 will contain the bcd digit formed. # |
| 14448 |
# # |
| 14449 |
# A6. Test d7. If zero, the digit formed is the ms digit. If non- # |
| 14450 |
# zero, it is the ls digit. Put the digit in its place in the # |
| 14451 |
# upper word of d0. If it is the ls digit, write the word # |
| 14452 |
# from d0 to memory. # |
| 14453 |
# # |
| 14454 |
# A7. Decrement d6 (LEN counter) and repeat the loop until zero. # |
| 14455 |
# # |
| 14456 |
######################################################################### |
| 14457 |
|
| 14458 |
# Implementation Notes: |
| 14459 |
# |
| 14460 |
# The registers are used as follows: |
| 14461 |
# |
| 14462 |
# d0: LEN counter |
| 14463 |
# d1: temp used to form the digit |
| 14464 |
# d2: upper 32-bits of fraction for mul by 8 |
| 14465 |
# d3: lower 32-bits of fraction for mul by 8 |
| 14466 |
# d4: upper 32-bits of fraction for mul by 2 |
| 14467 |
# d5: lower 32-bits of fraction for mul by 2 |
| 14468 |
# d6: temp for bit-field extracts |
| 14469 |
# d7: byte digit formation word;digit count {0,1} |
| 14470 |
# a0: pointer into memory for packed bcd string formation |
| 14471 |
# |
| 14472 |
|
| 14473 |
global binstr |
| 14474 |
binstr: |
| 14475 |
movm.l &0xff00,-(%sp) # {%d0-%d7} |
| 14476 |
|
| 14477 |
# |
| 14478 |
# A1: Init d7 |
| 14479 |
# |
| 14480 |
mov.l &1,%d7 # init d7 for second digit |
| 14481 |
subq.l &1,%d0 # for dbf d0 would have LEN+1 passes |
| 14482 |
# |
| 14483 |
# A2. Copy d2:d3 to d4:d5. Start loop. |
| 14484 |
# |
| 14485 |
loop: |
| 14486 |
mov.l %d2,%d4 # copy the fraction before muls |
| 14487 |
mov.l %d3,%d5 # to d4:d5 |
| 14488 |
# |
| 14489 |
# A3. Multiply d2:d3 by 8; extract msbs into d1. |
| 14490 |
# |
| 14491 |
bfextu %d2{&0:&3},%d1 # copy 3 msbs of d2 into d1 |
| 14492 |
asl.l &3,%d2 # shift d2 left by 3 places |
| 14493 |
bfextu %d3{&0:&3},%d6 # copy 3 msbs of d3 into d6 |
| 14494 |
asl.l &3,%d3 # shift d3 left by 3 places |
| 14495 |
or.l %d6,%d2 # or in msbs from d3 into d2 |
| 14496 |
# |
| 14497 |
# A4. Multiply d4:d5 by 2; add carry out to d1. |
| 14498 |
# |
| 14499 |
asl.l &1,%d5 # mul d5 by 2 |
| 14500 |
roxl.l &1,%d4 # mul d4 by 2 |
| 14501 |
swap %d6 # put 0 in d6 lower word |
| 14502 |
addx.w %d6,%d1 # add in extend from mul by 2 |
| 14503 |
# |
| 14504 |
# A5. Add mul by 8 to mul by 2. D1 contains the digit formed. |
| 14505 |
# |
| 14506 |
add.l %d5,%d3 # add lower 32 bits |
| 14507 |
nop # ERRATA FIX #13 (Rev. 1.2 6/6/90) |
| 14508 |
addx.l %d4,%d2 # add with extend upper 32 bits |
| 14509 |
nop # ERRATA FIX #13 (Rev. 1.2 6/6/90) |
| 14510 |
addx.w %d6,%d1 # add in extend from add to d1 |
| 14511 |
swap %d6 # with d6 = 0; put 0 in upper word |
| 14512 |
# |
| 14513 |
# A6. Test d7 and branch. |
| 14514 |
# |
| 14515 |
tst.w %d7 # if zero, store digit & to loop |
| 14516 |
beq.b first_d # if non-zero, form byte & write |
| 14517 |
sec_d: |
| 14518 |
swap %d7 # bring first digit to word d7b |
| 14519 |
asl.w &4,%d7 # first digit in upper 4 bits d7b |
| 14520 |
add.w %d1,%d7 # add in ls digit to d7b |
| 14521 |
mov.b %d7,(%a0)+ # store d7b byte in memory |
| 14522 |
swap %d7 # put LEN counter in word d7a |
| 14523 |
clr.w %d7 # set d7a to signal no digits done |
| 14524 |
dbf.w %d0,loop # do loop some more! |
| 14525 |
bra.b end_bstr # finished, so exit |
| 14526 |
first_d: |
| 14527 |
swap %d7 # put digit word in d7b |
| 14528 |
mov.w %d1,%d7 # put new digit in d7b |
| 14529 |
swap %d7 # put LEN counter in word d7a |
| 14530 |
addq.w &1,%d7 # set d7a to signal first digit done |
| 14531 |
dbf.w %d0,loop # do loop some more! |
| 14532 |
swap %d7 # put last digit in string |
| 14533 |
lsl.w &4,%d7 # move it to upper 4 bits |
| 14534 |
mov.b %d7,(%a0)+ # store it in memory string |
| 14535 |
# |
| 14536 |
# Clean up and return with result in fp0. |
| 14537 |
# |
| 14538 |
end_bstr: |
| 14539 |
movm.l (%sp)+,&0xff # {%d0-%d7} |
| 14540 |
rts |
| 14541 |
|
| 14542 |
######################################################################### |
| 14543 |
# XDEF **************************************************************** # |
| 14544 |
# facc_in_b(): dmem_read_byte failed # |
| 14545 |
# facc_in_w(): dmem_read_word failed # |
| 14546 |
# facc_in_l(): dmem_read_long failed # |
| 14547 |
# facc_in_d(): dmem_read of dbl prec failed # |
| 14548 |
# facc_in_x(): dmem_read of ext prec failed # |
| 14549 |
# # |
| 14550 |
# facc_out_b(): dmem_write_byte failed # |
| 14551 |
# facc_out_w(): dmem_write_word failed # |
| 14552 |
# facc_out_l(): dmem_write_long failed # |
| 14553 |
# facc_out_d(): dmem_write of dbl prec failed # |
| 14554 |
# facc_out_x(): dmem_write of ext prec failed # |
| 14555 |
# # |
| 14556 |
# XREF **************************************************************** # |
| 14557 |
# _real_access() - exit through access error handler # |
| 14558 |
# # |
| 14559 |
# INPUT *************************************************************** # |
| 14560 |
# None # |
| 14561 |
# # |
| 14562 |
# OUTPUT ************************************************************** # |
| 14563 |
# None # |
| 14564 |
# # |
| 14565 |
# ALGORITHM *********************************************************** # |
| 14566 |
# Flow jumps here when an FP data fetch call gets an error # |
| 14567 |
# result. This means the operating system wants an access error frame # |
| 14568 |
# made out of the current exception stack frame. # |
| 14569 |
# So, we first call restore() which makes sure that any updated # |
| 14570 |
# -(an)+ register gets returned to its pre-exception value and then # |
| 14571 |
# we change the stack to an access error stack frame. # |
| 14572 |
# # |
| 14573 |
######################################################################### |
| 14574 |
|
| 14575 |
facc_in_b: |
| 14576 |
movq.l &0x1,%d0 # one byte |
| 14577 |
bsr.w restore # fix An |
| 14578 |
|
| 14579 |
mov.w &0x0121,EXC_VOFF(%a6) # set FSLW |
| 14580 |
bra.w facc_finish |
| 14581 |
|
| 14582 |
facc_in_w: |
| 14583 |
movq.l &0x2,%d0 # two bytes |
| 14584 |
bsr.w restore # fix An |
| 14585 |
|
| 14586 |
mov.w &0x0141,EXC_VOFF(%a6) # set FSLW |
| 14587 |
bra.b facc_finish |
| 14588 |
|
| 14589 |
facc_in_l: |
| 14590 |
movq.l &0x4,%d0 # four bytes |
| 14591 |
bsr.w restore # fix An |
| 14592 |
|
| 14593 |
mov.w &0x0101,EXC_VOFF(%a6) # set FSLW |
| 14594 |
bra.b facc_finish |
| 14595 |
|
| 14596 |
facc_in_d: |
| 14597 |
movq.l &0x8,%d0 # eight bytes |
| 14598 |
bsr.w restore # fix An |
| 14599 |
|
| 14600 |
mov.w &0x0161,EXC_VOFF(%a6) # set FSLW |
| 14601 |
bra.b facc_finish |
| 14602 |
|
| 14603 |
facc_in_x: |
| 14604 |
movq.l &0xc,%d0 # twelve bytes |
| 14605 |
bsr.w restore # fix An |
| 14606 |
|
| 14607 |
mov.w &0x0161,EXC_VOFF(%a6) # set FSLW |
| 14608 |
bra.b facc_finish |
| 14609 |
|
| 14610 |
################################################################ |
| 14611 |
|
| 14612 |
facc_out_b: |
| 14613 |
movq.l &0x1,%d0 # one byte |
| 14614 |
bsr.w restore # restore An |
| 14615 |
|
| 14616 |
mov.w &0x00a1,EXC_VOFF(%a6) # set FSLW |
| 14617 |
bra.b facc_finish |
| 14618 |
|
| 14619 |
facc_out_w: |
| 14620 |
movq.l &0x2,%d0 # two bytes |
| 14621 |
bsr.w restore # restore An |
| 14622 |
|
| 14623 |
mov.w &0x00c1,EXC_VOFF(%a6) # set FSLW |
| 14624 |
bra.b facc_finish |
| 14625 |
|
| 14626 |
facc_out_l: |
| 14627 |
movq.l &0x4,%d0 # four bytes |
| 14628 |
bsr.w restore # restore An |
| 14629 |
|
| 14630 |
mov.w &0x0081,EXC_VOFF(%a6) # set FSLW |
| 14631 |
bra.b facc_finish |
| 14632 |
|
| 14633 |
facc_out_d: |
| 14634 |
movq.l &0x8,%d0 # eight bytes |
| 14635 |
bsr.w restore # restore An |
| 14636 |
|
| 14637 |
mov.w &0x00e1,EXC_VOFF(%a6) # set FSLW |
| 14638 |
bra.b facc_finish |
| 14639 |
|
| 14640 |
facc_out_x: |
| 14641 |
mov.l &0xc,%d0 # twelve bytes |
| 14642 |
bsr.w restore # restore An |
| 14643 |
|
| 14644 |
mov.w &0x00e1,EXC_VOFF(%a6) # set FSLW |
| 14645 |
|
| 14646 |
# here's where we actually create the access error frame from the |
| 14647 |
# current exception stack frame. |
| 14648 |
facc_finish: |
| 14649 |
mov.l USER_FPIAR(%a6),EXC_PC(%a6) # store current PC |
| 14650 |
|
| 14651 |
fmovm.x EXC_FPREGS(%a6),&0xc0 # restore fp0-fp1 |
| 14652 |
fmovm.l USER_FPCR(%a6),%fpcr,%fpsr,%fpiar # restore ctrl regs |
| 14653 |
movm.l EXC_DREGS(%a6),&0x0303 # restore d0-d1/a0-a1 |
| 14654 |
|
| 14655 |
unlk %a6 |
| 14656 |
|
| 14657 |
mov.l (%sp),-(%sp) # store SR, hi(PC) |
| 14658 |
mov.l 0x8(%sp),0x4(%sp) # store lo(PC) |
| 14659 |
mov.l 0xc(%sp),0x8(%sp) # store EA |
| 14660 |
mov.l &0x00000001,0xc(%sp) # store FSLW |
| 14661 |
mov.w 0x6(%sp),0xc(%sp) # fix FSLW (size) |
| 14662 |
mov.w &0x4008,0x6(%sp) # store voff |
| 14663 |
|
| 14664 |
btst &0x5,(%sp) # supervisor or user mode? |
| 14665 |
beq.b facc_out2 # user |
| 14666 |
bset &0x2,0xd(%sp) # set supervisor TM bit |
| 14667 |
|
| 14668 |
facc_out2: |
| 14669 |
bra.l _real_access |
| 14670 |
|
| 14671 |
################################################################## |
| 14672 |
|
| 14673 |
# if the effective addressing mode was predecrement or postincrement, |
| 14674 |
# the emulation has already changed its value to the correct post- |
| 14675 |
# instruction value. but since we're exiting to the access error |
| 14676 |
# handler, then AN must be returned to its pre-instruction value. |
| 14677 |
# we do that here. |
| 14678 |
restore: |
| 14679 |
mov.b EXC_OPWORD+0x1(%a6),%d1 |
| 14680 |
andi.b &0x38,%d1 # extract opmode |
| 14681 |
cmpi.b %d1,&0x18 # postinc? |
| 14682 |
beq.w rest_inc |
| 14683 |
cmpi.b %d1,&0x20 # predec? |
| 14684 |
beq.w rest_dec |
| 14685 |
rts |
| 14686 |
|
| 14687 |
rest_inc: |
| 14688 |
mov.b EXC_OPWORD+0x1(%a6),%d1 |
| 14689 |
andi.w &0x0007,%d1 # fetch An |
| 14690 |
|
| 14691 |
mov.w (tbl_rest_inc.b,%pc,%d1.w*2),%d1 |
| 14692 |
jmp (tbl_rest_inc.b,%pc,%d1.w*1) |
| 14693 |
|
| 14694 |
tbl_rest_inc: |
| 14695 |
short ri_a0 - tbl_rest_inc |
| 14696 |
short ri_a1 - tbl_rest_inc |
| 14697 |
short ri_a2 - tbl_rest_inc |
| 14698 |
short ri_a3 - tbl_rest_inc |
| 14699 |
short ri_a4 - tbl_rest_inc |
| 14700 |
short ri_a5 - tbl_rest_inc |
| 14701 |
short ri_a6 - tbl_rest_inc |
| 14702 |
short ri_a7 - tbl_rest_inc |
| 14703 |
|
| 14704 |
ri_a0: |
| 14705 |
sub.l %d0,EXC_DREGS+0x8(%a6) # fix stacked a0 |
| 14706 |
rts |
| 14707 |
ri_a1: |
| 14708 |
sub.l %d0,EXC_DREGS+0xc(%a6) # fix stacked a1 |
| 14709 |
rts |
| 14710 |
ri_a2: |
| 14711 |
sub.l %d0,%a2 # fix a2 |
| 14712 |
rts |
| 14713 |
ri_a3: |
| 14714 |
sub.l %d0,%a3 # fix a3 |
| 14715 |
rts |
| 14716 |
ri_a4: |
| 14717 |
sub.l %d0,%a4 # fix a4 |
| 14718 |
rts |
| 14719 |
ri_a5: |
| 14720 |
sub.l %d0,%a5 # fix a5 |
| 14721 |
rts |
| 14722 |
ri_a6: |
| 14723 |
sub.l %d0,(%a6) # fix stacked a6 |
| 14724 |
rts |
| 14725 |
# if it's a fmove out instruction, we don't have to fix a7 |
| 14726 |
# because we hadn't changed it yet. if it's an opclass two |
| 14727 |
# instruction (data moved in) and the exception was in supervisor |
| 14728 |
# mode, then also also wasn't updated. if it was user mode, then |
| 14729 |
# restore the correct a7 which is in the USP currently. |
| 14730 |
ri_a7: |
| 14731 |
cmpi.b EXC_VOFF(%a6),&0x30 # move in or out? |
| 14732 |
bne.b ri_a7_done # out |
| 14733 |
|
| 14734 |
btst &0x5,EXC_SR(%a6) # user or supervisor? |
| 14735 |
bne.b ri_a7_done # supervisor |
| 14736 |
movc %usp,%a0 # restore USP |
| 14737 |
sub.l %d0,%a0 |
| 14738 |
movc %a0,%usp |
| 14739 |
ri_a7_done: |
| 14740 |
rts |
| 14741 |
|
| 14742 |
# need to invert adjustment value if the <ea> was predec |
| 14743 |
rest_dec: |
| 14744 |
neg.l %d0 |
| 14745 |
bra.b rest_inc |