| 1 |
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
| 2 |
MOTOROLA MICROPROCESSOR & MEMORY TECHNOLOGY GROUP |
| 3 |
M68000 Hi-Performance Microprocessor Division |
| 4 |
M68060 Software Package |
| 5 |
Production Release P1.00 -- October 10, 1994 |
| 6 |
|
| 7 |
M68060 Software Package Copyright © 1993, 1994 Motorola Inc. All rights reserved. |
| 8 |
|
| 9 |
THE SOFTWARE is provided on an "AS IS" basis and without warranty. |
| 10 |
To the maximum extent permitted by applicable law, |
| 11 |
MOTOROLA DISCLAIMS ALL WARRANTIES WHETHER EXPRESS OR IMPLIED, |
| 12 |
INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE |
| 13 |
and any warranty against infringement with regard to the SOFTWARE |
| 14 |
(INCLUDING ANY MODIFIED VERSIONS THEREOF) and any accompanying written materials. |
| 15 |
|
| 16 |
To the maximum extent permitted by applicable law, |
| 17 |
IN NO EVENT SHALL MOTOROLA BE LIABLE FOR ANY DAMAGES WHATSOEVER |
| 18 |
(INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS, |
| 19 |
BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, OR OTHER PECUNIARY LOSS) |
| 20 |
ARISING OF THE USE OR INABILITY TO USE THE SOFTWARE. |
| 21 |
Motorola assumes no responsibility for the maintenance and support of the SOFTWARE. |
| 22 |
|
| 23 |
You are hereby granted a copyright license to use, modify, and distribute the SOFTWARE |
| 24 |
so long as this entire notice is retained without alteration in any modified and/or |
| 25 |
redistributed versions, and that such modified versions are clearly identified as such. |
| 26 |
No licenses are granted by implication, estoppel or otherwise under any patents |
| 27 |
or trademarks of Motorola, Inc. |
| 28 |
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
| 29 |
|
| 30 |
CHANGES SINCE LAST RELEASE: |
| 31 |
--------------------------- |
| 32 |
|
| 33 |
1) "movep" emulation where data was being read from memory |
| 34 |
was reading the intermediate bytes. Emulation now only |
| 35 |
reads the required bytes. |
| 36 |
|
| 37 |
2) "flogn", "flog2", and "flog10" of "1" was setting the |
| 38 |
Inexact FPSR bit. Emulation now does not set Inexact for |
| 39 |
this case. |
| 40 |
|
| 41 |
3) For an opclass three FP instruction where the effective addressing |
| 42 |
mode was pre-decrement or post-increment and the address register |
| 43 |
was A0 or A1, the address register was not being updated as a result |
| 44 |
of the operation. This has been corrected. |
| 45 |
|
| 46 |
4) Beta B.2 version had the following erratum: |
| 47 |
|
| 48 |
Scenario: |
| 49 |
--------- |
| 50 |
If {i,d}mem_{read,write}_{byte,word,long}() returns |
| 51 |
a failing value to the 68060SP, the package ignores |
| 52 |
this return value and continues with program execution |
| 53 |
as if it never received a failing value. |
| 54 |
|
| 55 |
Effect: |
| 56 |
------- |
| 57 |
For example, if a user executed "fsin.x ADDR,fp0" where |
| 58 |
ADDR should cause a "segmentation violation", the memory read |
| 59 |
requested by the package should return a failing value |
| 60 |
to the package. Since the package currently ignores this |
| 61 |
return value, the user program will continue to the |
| 62 |
next instruction, and the result created in fp0 will be |
| 63 |
undefined. |
| 64 |
|
| 65 |
Fix: |
| 66 |
---- |
| 67 |
This has been fixed in the current release. |
| 68 |
|
| 69 |
Notes: |
| 70 |
------ |
| 71 |
Upon receiving a non-zero (failing) return value from |
| 72 |
a {i,d}mem_{read,write}_{byte,word,long}() "call-out", |
| 73 |
the package creates a 16-byte access error stack frame |
| 74 |
from the current exception stack frame and exits |
| 75 |
through the "call-out" _real_access(). This is the process |
| 76 |
as described in the MC68060 User's Manual. |
| 77 |
|
| 78 |
For instruction read access errors, the info stacked is: |
| 79 |
SR = SR at time of exception |
| 80 |
PC = PC of instruction being emulated |
| 81 |
VOFF = $4008 (stack frame format type) |
| 82 |
ADDRESS = PC of instruction being emulated |
| 83 |
FSLW = FAULT STATUS LONGWORD |
| 84 |
|
| 85 |
The valid FSLW bits are: |
| 86 |
bit 27 = 1 (misaligned bit) |
| 87 |
bit 24 = 1 (read) |
| 88 |
bit 23 = 0 (write) |
| 89 |
bit 22:21 = 10 (SIZE = word) |
| 90 |
bit 20:19 = 00 (TT) |
| 91 |
bit 18:16 = x10 (TM; x = 1 for supervisor mode) |
| 92 |
bit 15 = 1 (IO) |
| 93 |
bit 0 = 1 (Software Emulation Error) |
| 94 |
|
| 95 |
all other bits are EQUAL TO ZERO and can be set by the _real_access() |
| 96 |
"call-out" stub by the user as appropriate. The MC68060 User's Manual |
| 97 |
stated that ONLY "bit 0" would be set. The 060SP attempts to set a few |
| 98 |
other bits. |
| 99 |
|
| 100 |
For data read/write access errors, the info stacked is: |
| 101 |
SR = SR at time of exception |
| 102 |
PC = PC of instruction being emulated |
| 103 |
VOFF = $4008 (stack frame format type) |
| 104 |
ADDRESS = Address of source or destination operand |
| 105 |
FSLW = FAULT STATUS LONGWORD |
| 106 |
|
| 107 |
The valid FSLW bits are: |
| 108 |
bit 27 = 0 (misaligned bit) |
| 109 |
bit 24 = x (read; 1 if read, 0 if write) |
| 110 |
bit 23 = x (write; 1 if write, 0 if read) |
| 111 |
bit 22:21 = xx (SIZE; see MC68060 User's Manual) |
| 112 |
bit 20:19 = 00 (TT) |
| 113 |
bit 18:16 = x01 (TM; x = 1 for supervisor mode) |
| 114 |
bit 15 = 0 (IO) |
| 115 |
bit 0 = 1 (Software Emulation Error) |
| 116 |
|
| 117 |
all other bits are EQUAL TO ZERO and can be set by the _real_access() |
| 118 |
"call-out" stub by the user as appropriate. The MC68060 User's Manual |
| 119 |
stated that ONLY "bit 0" would be set. The 060SP attempts to set a few |
| 120 |
other bits. |