| 1 |
// SPDX-License-Identifier: GPL-2.0 |
| 2 |
#include <linux/serial_sci.h> |
| 3 |
#include <linux/serial_core.h> |
| 4 |
#include <linux/io.h> |
| 5 |
#include <cpu/serial.h> |
| 6 |
#include <cpu/gpio.h> |
| 7 |
|
| 8 |
static void sh7720_sci_init_pins(struct uart_port *port, unsigned int cflag) |
| 9 |
{ |
| 10 |
unsigned short data; |
| 11 |
|
| 12 |
if (cflag & CRTSCTS) { |
| 13 |
/* enable RTS/CTS */ |
| 14 |
if (port->mapbase == 0xa4430000) { /* SCIF0 */ |
| 15 |
/* Clear PTCR bit 9-2; enable all scif pins but sck */ |
| 16 |
data = __raw_readw(PORT_PTCR); |
| 17 |
__raw_writew((data & 0xfc03), PORT_PTCR); |
| 18 |
} else if (port->mapbase == 0xa4438000) { /* SCIF1 */ |
| 19 |
/* Clear PVCR bit 9-2 */ |
| 20 |
data = __raw_readw(PORT_PVCR); |
| 21 |
__raw_writew((data & 0xfc03), PORT_PVCR); |
| 22 |
} |
| 23 |
} else { |
| 24 |
if (port->mapbase == 0xa4430000) { /* SCIF0 */ |
| 25 |
/* Clear PTCR bit 5-2; enable only tx and rx */ |
| 26 |
data = __raw_readw(PORT_PTCR); |
| 27 |
__raw_writew((data & 0xffc3), PORT_PTCR); |
| 28 |
} else if (port->mapbase == 0xa4438000) { /* SCIF1 */ |
| 29 |
/* Clear PVCR bit 5-2 */ |
| 30 |
data = __raw_readw(PORT_PVCR); |
| 31 |
__raw_writew((data & 0xffc3), PORT_PVCR); |
| 32 |
} |
| 33 |
} |
| 34 |
} |
| 35 |
|
| 36 |
struct plat_sci_port_ops sh7720_sci_port_ops = { |
| 37 |
.init_pins = sh7720_sci_init_pins, |
| 38 |
}; |