| 1 |
// SPDX-License-Identifier: GPL-2.0-or-later |
| 2 |
/* |
| 3 |
* Copyright (C) 2000, 2001, 2002, 2003 Broadcom Corporation |
| 4 |
*/ |
| 5 |
#include <linux/kernel.h> |
| 6 |
#include <linux/init.h> |
| 7 |
#include <linux/linkage.h> |
| 8 |
#include <linux/interrupt.h> |
| 9 |
#include <linux/spinlock.h> |
| 10 |
#include <linux/smp.h> |
| 11 |
#include <linux/mm.h> |
| 12 |
#include <linux/kernel_stat.h> |
| 13 |
|
| 14 |
#include <asm/errno.h> |
| 15 |
#include <asm/signal.h> |
| 16 |
#include <asm/time.h> |
| 17 |
#include <asm/io.h> |
| 18 |
|
| 19 |
#include <asm/sibyte/sb1250_regs.h> |
| 20 |
#include <asm/sibyte/sb1250_int.h> |
| 21 |
#include <asm/sibyte/sb1250_uart.h> |
| 22 |
#include <asm/sibyte/sb1250_scd.h> |
| 23 |
#include <asm/sibyte/sb1250.h> |
| 24 |
|
| 25 |
/* |
| 26 |
* These are the routines that handle all the low level interrupt stuff. |
| 27 |
* Actions handled here are: initialization of the interrupt map, requesting of |
| 28 |
* interrupt lines by handlers, dispatching if interrupts to handlers, probing |
| 29 |
* for interrupt lines |
| 30 |
*/ |
| 31 |
|
| 32 |
#ifdef CONFIG_SIBYTE_HAS_LDT |
| 33 |
extern unsigned long ldt_eoi_space; |
| 34 |
#endif |
| 35 |
|
| 36 |
/* Store the CPU id (not the logical number) */ |
| 37 |
int sb1250_irq_owner[SB1250_NR_IRQS]; |
| 38 |
|
| 39 |
static DEFINE_RAW_SPINLOCK(sb1250_imr_lock); |
| 40 |
|
| 41 |
void sb1250_mask_irq(int cpu, int irq) |
| 42 |
{ |
| 43 |
unsigned long flags; |
| 44 |
u64 cur_ints; |
| 45 |
|
| 46 |
raw_spin_lock_irqsave(&sb1250_imr_lock, flags); |
| 47 |
cur_ints = ____raw_readq(IOADDR(A_IMR_MAPPER(cpu) + |
| 48 |
R_IMR_INTERRUPT_MASK)); |
| 49 |
cur_ints |= (((u64) 1) << irq); |
| 50 |
____raw_writeq(cur_ints, IOADDR(A_IMR_MAPPER(cpu) + |
| 51 |
R_IMR_INTERRUPT_MASK)); |
| 52 |
raw_spin_unlock_irqrestore(&sb1250_imr_lock, flags); |
| 53 |
} |
| 54 |
|
| 55 |
void sb1250_unmask_irq(int cpu, int irq) |
| 56 |
{ |
| 57 |
unsigned long flags; |
| 58 |
u64 cur_ints; |
| 59 |
|
| 60 |
raw_spin_lock_irqsave(&sb1250_imr_lock, flags); |
| 61 |
cur_ints = ____raw_readq(IOADDR(A_IMR_MAPPER(cpu) + |
| 62 |
R_IMR_INTERRUPT_MASK)); |
| 63 |
cur_ints &= ~(((u64) 1) << irq); |
| 64 |
____raw_writeq(cur_ints, IOADDR(A_IMR_MAPPER(cpu) + |
| 65 |
R_IMR_INTERRUPT_MASK)); |
| 66 |
raw_spin_unlock_irqrestore(&sb1250_imr_lock, flags); |
| 67 |
} |
| 68 |
|
| 69 |
#ifdef CONFIG_SMP |
| 70 |
static int sb1250_set_affinity(struct irq_data *d, const struct cpumask *mask, |
| 71 |
bool force) |
| 72 |
{ |
| 73 |
int i = 0, old_cpu, cpu, int_on; |
| 74 |
unsigned int irq = d->irq; |
| 75 |
u64 cur_ints; |
| 76 |
unsigned long flags; |
| 77 |
|
| 78 |
i = cpumask_first_and(mask, cpu_online_mask); |
| 79 |
|
| 80 |
/* Convert logical CPU to physical CPU */ |
| 81 |
cpu = cpu_logical_map(i); |
| 82 |
|
| 83 |
/* Protect against other affinity changers and IMR manipulation */ |
| 84 |
raw_spin_lock_irqsave(&sb1250_imr_lock, flags); |
| 85 |
|
| 86 |
/* Swizzle each CPU's IMR (but leave the IP selection alone) */ |
| 87 |
old_cpu = sb1250_irq_owner[irq]; |
| 88 |
cur_ints = ____raw_readq(IOADDR(A_IMR_MAPPER(old_cpu) + |
| 89 |
R_IMR_INTERRUPT_MASK)); |
| 90 |
int_on = !(cur_ints & (((u64) 1) << irq)); |
| 91 |
if (int_on) { |
| 92 |
/* If it was on, mask it */ |
| 93 |
cur_ints |= (((u64) 1) << irq); |
| 94 |
____raw_writeq(cur_ints, IOADDR(A_IMR_MAPPER(old_cpu) + |
| 95 |
R_IMR_INTERRUPT_MASK)); |
| 96 |
} |
| 97 |
sb1250_irq_owner[irq] = cpu; |
| 98 |
if (int_on) { |
| 99 |
/* unmask for the new CPU */ |
| 100 |
cur_ints = ____raw_readq(IOADDR(A_IMR_MAPPER(cpu) + |
| 101 |
R_IMR_INTERRUPT_MASK)); |
| 102 |
cur_ints &= ~(((u64) 1) << irq); |
| 103 |
____raw_writeq(cur_ints, IOADDR(A_IMR_MAPPER(cpu) + |
| 104 |
R_IMR_INTERRUPT_MASK)); |
| 105 |
} |
| 106 |
raw_spin_unlock_irqrestore(&sb1250_imr_lock, flags); |
| 107 |
|
| 108 |
return 0; |
| 109 |
} |
| 110 |
#endif |
| 111 |
|
| 112 |
static void disable_sb1250_irq(struct irq_data *d) |
| 113 |
{ |
| 114 |
unsigned int irq = d->irq; |
| 115 |
|
| 116 |
sb1250_mask_irq(sb1250_irq_owner[irq], irq); |
| 117 |
} |
| 118 |
|
| 119 |
static void enable_sb1250_irq(struct irq_data *d) |
| 120 |
{ |
| 121 |
unsigned int irq = d->irq; |
| 122 |
|
| 123 |
sb1250_unmask_irq(sb1250_irq_owner[irq], irq); |
| 124 |
} |
| 125 |
|
| 126 |
|
| 127 |
static void ack_sb1250_irq(struct irq_data *d) |
| 128 |
{ |
| 129 |
unsigned int irq = d->irq; |
| 130 |
#ifdef CONFIG_SIBYTE_HAS_LDT |
| 131 |
u64 pending; |
| 132 |
|
| 133 |
/* |
| 134 |
* If the interrupt was an HT interrupt, now is the time to |
| 135 |
* clear it. NOTE: we assume the HT bridge was set up to |
| 136 |
* deliver the interrupts to all CPUs (which makes affinity |
| 137 |
* changing easier for us) |
| 138 |
*/ |
| 139 |
pending = __raw_readq(IOADDR(A_IMR_REGISTER(sb1250_irq_owner[irq], |
| 140 |
R_IMR_LDT_INTERRUPT))); |
| 141 |
pending &= ((u64)1 << (irq)); |
| 142 |
if (pending) { |
| 143 |
int i; |
| 144 |
for (i=0; i<NR_CPUS; i++) { |
| 145 |
int cpu; |
| 146 |
#ifdef CONFIG_SMP |
| 147 |
cpu = cpu_logical_map(i); |
| 148 |
#else |
| 149 |
cpu = i; |
| 150 |
#endif |
| 151 |
/* |
| 152 |
* Clear for all CPUs so an affinity switch |
| 153 |
* doesn't find an old status |
| 154 |
*/ |
| 155 |
__raw_writeq(pending, |
| 156 |
IOADDR(A_IMR_REGISTER(cpu, |
| 157 |
R_IMR_LDT_INTERRUPT_CLR))); |
| 158 |
} |
| 159 |
|
| 160 |
/* |
| 161 |
* Generate EOI. For Pass 1 parts, EOI is a nop. For |
| 162 |
* Pass 2, the LDT world may be edge-triggered, but |
| 163 |
* this EOI shouldn't hurt. If they are |
| 164 |
* level-sensitive, the EOI is required. |
| 165 |
*/ |
| 166 |
*(uint32_t *)(ldt_eoi_space+(irq<<16)+(7<<2)) = 0; |
| 167 |
} |
| 168 |
#endif |
| 169 |
sb1250_mask_irq(sb1250_irq_owner[irq], irq); |
| 170 |
} |
| 171 |
|
| 172 |
static struct irq_chip sb1250_irq_type = { |
| 173 |
.name = "SB1250-IMR", |
| 174 |
.irq_mask_ack = ack_sb1250_irq, |
| 175 |
.irq_unmask = enable_sb1250_irq, |
| 176 |
.irq_mask = disable_sb1250_irq, |
| 177 |
#ifdef CONFIG_SMP |
| 178 |
.irq_set_affinity = sb1250_set_affinity |
| 179 |
#endif |
| 180 |
}; |
| 181 |
|
| 182 |
void __init init_sb1250_irqs(void) |
| 183 |
{ |
| 184 |
int i; |
| 185 |
|
| 186 |
for (i = 0; i < SB1250_NR_IRQS; i++) { |
| 187 |
irq_set_chip_and_handler(i, &sb1250_irq_type, |
| 188 |
handle_level_irq); |
| 189 |
sb1250_irq_owner[i] = 0; |
| 190 |
} |
| 191 |
} |
| 192 |
|
| 193 |
|
| 194 |
/* |
| 195 |
* arch_init_irq is called early in the boot sequence from init/main.c via |
| 196 |
* init_IRQ. It is responsible for setting up the interrupt mapper and |
| 197 |
* installing the handler that will be responsible for dispatching interrupts |
| 198 |
* to the "right" place. |
| 199 |
*/ |
| 200 |
/* |
| 201 |
* For now, map all interrupts to IP[2]. We could save |
| 202 |
* some cycles by parceling out system interrupts to different |
| 203 |
* IP lines, but keep it simple for bringup. We'll also direct |
| 204 |
* all interrupts to a single CPU; we should probably route |
| 205 |
* PCI and LDT to one cpu and everything else to the other |
| 206 |
* to balance the load a bit. |
| 207 |
* |
| 208 |
* On the second cpu, everything is set to IP5, which is |
| 209 |
* ignored, EXCEPT the mailbox interrupt. That one is |
| 210 |
* set to IP[2] so it is handled. This is needed so we |
| 211 |
* can do cross-cpu function calls, as required by SMP |
| 212 |
*/ |
| 213 |
|
| 214 |
#define IMR_IP2_VAL K_INT_MAP_I0 |
| 215 |
#define IMR_IP3_VAL K_INT_MAP_I1 |
| 216 |
#define IMR_IP4_VAL K_INT_MAP_I2 |
| 217 |
#define IMR_IP5_VAL K_INT_MAP_I3 |
| 218 |
#define IMR_IP6_VAL K_INT_MAP_I4 |
| 219 |
|
| 220 |
void __init arch_init_irq(void) |
| 221 |
{ |
| 222 |
|
| 223 |
unsigned int i; |
| 224 |
u64 tmp; |
| 225 |
unsigned int imask = STATUSF_IP4 | STATUSF_IP3 | STATUSF_IP2 | |
| 226 |
STATUSF_IP1 | STATUSF_IP0; |
| 227 |
|
| 228 |
/* Default everything to IP2 */ |
| 229 |
for (i = 0; i < SB1250_NR_IRQS; i++) { /* was I0 */ |
| 230 |
__raw_writeq(IMR_IP2_VAL, |
| 231 |
IOADDR(A_IMR_REGISTER(0, |
| 232 |
R_IMR_INTERRUPT_MAP_BASE) + |
| 233 |
(i << 3))); |
| 234 |
__raw_writeq(IMR_IP2_VAL, |
| 235 |
IOADDR(A_IMR_REGISTER(1, |
| 236 |
R_IMR_INTERRUPT_MAP_BASE) + |
| 237 |
(i << 3))); |
| 238 |
} |
| 239 |
|
| 240 |
init_sb1250_irqs(); |
| 241 |
|
| 242 |
/* |
| 243 |
* Map the high 16 bits of the mailbox registers to IP[3], for |
| 244 |
* inter-cpu messages |
| 245 |
*/ |
| 246 |
/* Was I1 */ |
| 247 |
__raw_writeq(IMR_IP3_VAL, |
| 248 |
IOADDR(A_IMR_REGISTER(0, R_IMR_INTERRUPT_MAP_BASE) + |
| 249 |
(K_INT_MBOX_0 << 3))); |
| 250 |
__raw_writeq(IMR_IP3_VAL, |
| 251 |
IOADDR(A_IMR_REGISTER(1, R_IMR_INTERRUPT_MAP_BASE) + |
| 252 |
(K_INT_MBOX_0 << 3))); |
| 253 |
|
| 254 |
/* Clear the mailboxes. The firmware may leave them dirty */ |
| 255 |
__raw_writeq(0xffffffffffffffffULL, |
| 256 |
IOADDR(A_IMR_REGISTER(0, R_IMR_MAILBOX_CLR_CPU))); |
| 257 |
__raw_writeq(0xffffffffffffffffULL, |
| 258 |
IOADDR(A_IMR_REGISTER(1, R_IMR_MAILBOX_CLR_CPU))); |
| 259 |
|
| 260 |
/* Mask everything except the mailbox registers for both cpus */ |
| 261 |
tmp = ~((u64) 0) ^ (((u64) 1) << K_INT_MBOX_0); |
| 262 |
__raw_writeq(tmp, IOADDR(A_IMR_REGISTER(0, R_IMR_INTERRUPT_MASK))); |
| 263 |
__raw_writeq(tmp, IOADDR(A_IMR_REGISTER(1, R_IMR_INTERRUPT_MASK))); |
| 264 |
|
| 265 |
/* Enable necessary IPs, disable the rest */ |
| 266 |
change_c0_status(ST0_IM, imask); |
| 267 |
} |
| 268 |
|
| 269 |
extern void sb1250_mailbox_interrupt(void); |
| 270 |
|
| 271 |
static inline void dispatch_ip2(void) |
| 272 |
{ |
| 273 |
unsigned int cpu = smp_processor_id(); |
| 274 |
unsigned long long mask; |
| 275 |
|
| 276 |
/* |
| 277 |
* Default...we've hit an IP[2] interrupt, which means we've got to |
| 278 |
* check the 1250 interrupt registers to figure out what to do. Need |
| 279 |
* to detect which CPU we're on, now that smp_affinity is supported. |
| 280 |
*/ |
| 281 |
mask = __raw_readq(IOADDR(A_IMR_REGISTER(cpu, |
| 282 |
R_IMR_INTERRUPT_STATUS_BASE))); |
| 283 |
if (mask) |
| 284 |
do_IRQ(fls64(mask) - 1); |
| 285 |
} |
| 286 |
|
| 287 |
asmlinkage void plat_irq_dispatch(void) |
| 288 |
{ |
| 289 |
unsigned int cpu = smp_processor_id(); |
| 290 |
unsigned int pending; |
| 291 |
|
| 292 |
/* |
| 293 |
* What a pain. We have to be really careful saving the upper 32 bits |
| 294 |
* of any * register across function calls if we don't want them |
| 295 |
* trashed--since were running in -o32, the calling routing never saves |
| 296 |
* the full 64 bits of a register across a function call. Being the |
| 297 |
* interrupt handler, we're guaranteed that interrupts are disabled |
| 298 |
* during this code so we don't have to worry about random interrupts |
| 299 |
* blasting the high 32 bits. |
| 300 |
*/ |
| 301 |
|
| 302 |
pending = read_c0_cause() & read_c0_status() & ST0_IM; |
| 303 |
|
| 304 |
if (pending & CAUSEF_IP7) /* CPU performance counter interrupt */ |
| 305 |
do_IRQ(MIPS_CPU_IRQ_BASE + 7); |
| 306 |
else if (pending & CAUSEF_IP4) |
| 307 |
do_IRQ(K_INT_TIMER_0 + cpu); /* sb1250_timer_interrupt() */ |
| 308 |
|
| 309 |
#ifdef CONFIG_SMP |
| 310 |
else if (pending & CAUSEF_IP3) |
| 311 |
sb1250_mailbox_interrupt(); |
| 312 |
#endif |
| 313 |
|
| 314 |
else if (pending & CAUSEF_IP2) |
| 315 |
dispatch_ip2(); |
| 316 |
else |
| 317 |
spurious_interrupt(); |
| 318 |
} |