Debian Codegraph @

arch/mips/sibyte/Kconfig

raw
1 # SPDX-License-Identifier: GPL-2.0
2 config SIBYTE_SB1250
3 bool
4 select CEVT_SB1250
5 select CSRC_SB1250
6 select HAVE_PCI
7 select IRQ_MIPS_CPU
8 select SIBYTE_ENABLE_LDT_IF_PCI
9 select SIBYTE_HAS_ZBUS_PROFILING
10 select SIBYTE_SB1xxx_SOC
11 select SYS_SUPPORTS_SMP
12
13 config SIBYTE_BCM1125
14 bool
15 select CEVT_SB1250
16 select CSRC_SB1250
17 select HAVE_PCI
18 select IRQ_MIPS_CPU
19 select SIBYTE_BCM112X
20 select SIBYTE_HAS_ZBUS_PROFILING
21 select SIBYTE_SB1xxx_SOC
22
23 config SIBYTE_BCM112X
24 bool
25 select CEVT_SB1250
26 select CSRC_SB1250
27 select IRQ_MIPS_CPU
28 select SIBYTE_SB1xxx_SOC
29 select SIBYTE_HAS_ZBUS_PROFILING
30
31 config SIBYTE_BCM1x80
32 bool
33 select CEVT_BCM1480
34 select CSRC_BCM1480
35 select HAVE_PCI
36 select IRQ_MIPS_CPU
37 select SIBYTE_HAS_ZBUS_PROFILING
38 select SIBYTE_SB1xxx_SOC
39 select SYS_SUPPORTS_SMP
40
41 config SIBYTE_SB1xxx_SOC
42 bool
43 select IRQ_MIPS_CPU
44 select SWAP_IO_SPACE
45 select SYS_SUPPORTS_32BIT_KERNEL
46 select SYS_SUPPORTS_64BIT_KERNEL
47 select FW_CFE
48 select SYS_HAS_EARLY_PRINTK
49
50 choice
51 prompt "SiByte SOC Stepping"
52 depends on SIBYTE_SB1xxx_SOC
53
54 config CPU_SB1_PASS_2_1250
55 bool "1250 An"
56 depends on SIBYTE_SB1250
57 select CPU_SB1_PASS_2
58 help
59 Also called BCM1250 Pass 2
60
61 config CPU_SB1_PASS_2_2
62 bool "1250 Bn"
63 depends on SIBYTE_SB1250
64 select CPU_HAS_PREFETCH
65 help
66 Also called BCM1250 Pass 2.2
67
68 config CPU_SB1_PASS_4
69 bool "1250 Cn"
70 depends on SIBYTE_SB1250
71 select CPU_HAS_PREFETCH
72 help
73 Also called BCM1250 Pass 3
74
75 config CPU_SB1_PASS_2_112x
76 bool "112x Hybrid"
77 depends on SIBYTE_BCM112X
78 select CPU_SB1_PASS_2
79
80 config CPU_SB1_PASS_3
81 bool "112x An"
82 depends on SIBYTE_BCM112X
83 select CPU_HAS_PREFETCH
84
85 endchoice
86
87 config CPU_SB1_PASS_2
88 bool
89
90 config SIBYTE_HAS_LDT
91 bool
92
93 config SIBYTE_ENABLE_LDT_IF_PCI
94 bool
95 select SIBYTE_HAS_LDT if PCI
96
97 config SB1_CEX_ALWAYS_FATAL
98 bool "All cache exceptions considered fatal (no recovery attempted)"
99 depends on SIBYTE_SB1xxx_SOC
100
101 config SB1_CERR_STALL
102 bool "Stall (rather than panic) on fatal cache error"
103 depends on SIBYTE_SB1xxx_SOC
104
105 config SIBYTE_CFE_CONSOLE
106 bool "Use firmware console"
107 depends on SIBYTE_SB1xxx_SOC
108 help
109 Use the CFE API's console write routines during boot. Other console
110 options (VT console, sb1250 duart console, etc.) should not be
111 configured.
112
113 config SIBYTE_BUS_WATCHER
114 bool "Support for Bus Watcher statistics"
115 depends on SIBYTE_SB1xxx_SOC && \
116 (SIBYTE_BCM112X || SIBYTE_SB1250 || SIBYTE_BCM1x80)
117 help
118 Handle and keep statistics on the bus error interrupts (COR_ECC,
119 BAD_ECC, IO_BUS).
120
121 config SIBYTE_BW_TRACE
122 bool "Capture bus trace before bus error"
123 depends on SIBYTE_BUS_WATCHER
124 help
125 Run a continuous bus trace, dumping the raw data as soon as
126 a ZBbus error is detected. Cannot work if ZBbus profiling
127 is turned on, and also will interfere with JTAG-based trace
128 buffer activity. Raw buffer data is dumped to console, and
129 must be processed off-line.
130
131 config SIBYTE_TBPROF
132 tristate "Support for ZBbus profiling"
133 depends on SIBYTE_HAS_ZBUS_PROFILING
134
135 config SIBYTE_HAS_ZBUS_PROFILING
136 bool