| 1 |
// SPDX-License-Identifier: GPL-2.0 |
| 2 |
#include <dt-bindings/clock/ath79-clk.h> |
| 3 |
|
| 4 |
/ { |
| 5 |
compatible = "qca,ar9331"; |
| 6 |
|
| 7 |
#address-cells = <1>; |
| 8 |
#size-cells = <1>; |
| 9 |
|
| 10 |
cpus { |
| 11 |
#address-cells = <1>; |
| 12 |
#size-cells = <0>; |
| 13 |
|
| 14 |
cpu@0 { |
| 15 |
device_type = "cpu"; |
| 16 |
compatible = "mips,mips24Kc"; |
| 17 |
clocks = <&pll ATH79_CLK_CPU>; |
| 18 |
reg = <0>; |
| 19 |
}; |
| 20 |
}; |
| 21 |
|
| 22 |
cpuintc: interrupt-controller { |
| 23 |
compatible = "qca,ar7100-cpu-intc"; |
| 24 |
|
| 25 |
interrupt-controller; |
| 26 |
#interrupt-cells = <1>; |
| 27 |
|
| 28 |
qca,ddr-wb-channel-interrupts = <2>, <3>; |
| 29 |
qca,ddr-wb-channels = <&ddr_ctrl 3>, <&ddr_ctrl 2>; |
| 30 |
}; |
| 31 |
|
| 32 |
ref: ref { |
| 33 |
compatible = "fixed-clock"; |
| 34 |
#clock-cells = <0>; |
| 35 |
}; |
| 36 |
|
| 37 |
ahb { |
| 38 |
compatible = "simple-bus"; |
| 39 |
ranges; |
| 40 |
|
| 41 |
#address-cells = <1>; |
| 42 |
#size-cells = <1>; |
| 43 |
|
| 44 |
interrupt-parent = <&cpuintc>; |
| 45 |
|
| 46 |
apb { |
| 47 |
compatible = "simple-bus"; |
| 48 |
ranges; |
| 49 |
|
| 50 |
#address-cells = <1>; |
| 51 |
#size-cells = <1>; |
| 52 |
|
| 53 |
interrupt-parent = <&miscintc>; |
| 54 |
|
| 55 |
ddr_ctrl: memory-controller@18000000 { |
| 56 |
compatible = "qca,ar7240-ddr-controller"; |
| 57 |
reg = <0x18000000 0x100>; |
| 58 |
|
| 59 |
#qca,ddr-wb-channel-cells = <1>; |
| 60 |
}; |
| 61 |
|
| 62 |
uart: serial@18020000 { |
| 63 |
compatible = "qca,ar9330-uart"; |
| 64 |
reg = <0x18020000 0x14>; |
| 65 |
|
| 66 |
interrupts = <3>; |
| 67 |
|
| 68 |
clocks = <&ref>; |
| 69 |
clock-names = "uart"; |
| 70 |
|
| 71 |
status = "disabled"; |
| 72 |
}; |
| 73 |
|
| 74 |
gpio: gpio@18040000 { |
| 75 |
compatible = "qca,ar7100-gpio"; |
| 76 |
reg = <0x18040000 0x34>; |
| 77 |
interrupts = <2>; |
| 78 |
|
| 79 |
ngpios = <30>; |
| 80 |
|
| 81 |
gpio-controller; |
| 82 |
#gpio-cells = <2>; |
| 83 |
|
| 84 |
interrupt-controller; |
| 85 |
#interrupt-cells = <2>; |
| 86 |
|
| 87 |
status = "disabled"; |
| 88 |
}; |
| 89 |
|
| 90 |
pll: pll-controller@18050000 { |
| 91 |
compatible = "qca,ar9330-pll"; |
| 92 |
reg = <0x18050000 0x100>; |
| 93 |
|
| 94 |
clocks = <&ref>; |
| 95 |
clock-names = "ref"; |
| 96 |
|
| 97 |
#clock-cells = <1>; |
| 98 |
}; |
| 99 |
|
| 100 |
miscintc: interrupt-controller@18060010 { |
| 101 |
compatible = "qca,ar7240-misc-intc"; |
| 102 |
reg = <0x18060010 0x8>; |
| 103 |
|
| 104 |
interrupt-parent = <&cpuintc>; |
| 105 |
interrupts = <6>; |
| 106 |
|
| 107 |
interrupt-controller; |
| 108 |
#interrupt-cells = <1>; |
| 109 |
}; |
| 110 |
|
| 111 |
rst: reset-controller@1806001c { |
| 112 |
compatible = "qca,ar7100-reset"; |
| 113 |
reg = <0x1806001c 0x4>; |
| 114 |
|
| 115 |
#reset-cells = <1>; |
| 116 |
}; |
| 117 |
}; |
| 118 |
|
| 119 |
eth0: ethernet@19000000 { |
| 120 |
compatible = "qca,ar9330-eth"; |
| 121 |
reg = <0x19000000 0x200>; |
| 122 |
interrupts = <4>; |
| 123 |
|
| 124 |
resets = <&rst 9>, <&rst 22>; |
| 125 |
reset-names = "mac", "mdio"; |
| 126 |
clocks = <&pll ATH79_CLK_AHB>, <&pll ATH79_CLK_AHB>; |
| 127 |
clock-names = "eth", "mdio"; |
| 128 |
|
| 129 |
phy-mode = "mii"; |
| 130 |
phy-handle = <&phy_port4>; |
| 131 |
|
| 132 |
status = "disabled"; |
| 133 |
}; |
| 134 |
|
| 135 |
eth1: ethernet@1a000000 { |
| 136 |
compatible = "qca,ar9330-eth"; |
| 137 |
reg = <0x1a000000 0x200>; |
| 138 |
interrupts = <5>; |
| 139 |
resets = <&rst 13>, <&rst 23>; |
| 140 |
reset-names = "mac", "mdio"; |
| 141 |
clocks = <&pll ATH79_CLK_AHB>, <&pll ATH79_CLK_AHB>; |
| 142 |
clock-names = "eth", "mdio"; |
| 143 |
|
| 144 |
phy-mode = "gmii"; |
| 145 |
|
| 146 |
status = "disabled"; |
| 147 |
|
| 148 |
fixed-link { |
| 149 |
speed = <1000>; |
| 150 |
full-duplex; |
| 151 |
pause; |
| 152 |
}; |
| 153 |
|
| 154 |
mdio { |
| 155 |
#address-cells = <1>; |
| 156 |
#size-cells = <0>; |
| 157 |
|
| 158 |
switch10: switch@10 { |
| 159 |
#address-cells = <1>; |
| 160 |
#size-cells = <0>; |
| 161 |
|
| 162 |
compatible = "qca,ar9331-switch"; |
| 163 |
reg = <0x10>; |
| 164 |
resets = <&rst 8>; |
| 165 |
reset-names = "switch"; |
| 166 |
|
| 167 |
interrupt-parent = <&miscintc>; |
| 168 |
interrupts = <12>; |
| 169 |
|
| 170 |
interrupt-controller; |
| 171 |
#interrupt-cells = <1>; |
| 172 |
|
| 173 |
ports { |
| 174 |
#address-cells = <1>; |
| 175 |
#size-cells = <0>; |
| 176 |
|
| 177 |
switch_port0: port@0 { |
| 178 |
reg = <0x0>; |
| 179 |
ethernet = <ð1>; |
| 180 |
|
| 181 |
phy-mode = "gmii"; |
| 182 |
|
| 183 |
fixed-link { |
| 184 |
speed = <1000>; |
| 185 |
full-duplex; |
| 186 |
pause; |
| 187 |
}; |
| 188 |
}; |
| 189 |
|
| 190 |
switch_port1: port@1 { |
| 191 |
reg = <0x1>; |
| 192 |
phy-handle = <&phy_port0>; |
| 193 |
phy-mode = "internal"; |
| 194 |
|
| 195 |
status = "disabled"; |
| 196 |
}; |
| 197 |
|
| 198 |
switch_port2: port@2 { |
| 199 |
reg = <0x2>; |
| 200 |
phy-handle = <&phy_port1>; |
| 201 |
phy-mode = "internal"; |
| 202 |
|
| 203 |
status = "disabled"; |
| 204 |
}; |
| 205 |
|
| 206 |
switch_port3: port@3 { |
| 207 |
reg = <0x3>; |
| 208 |
phy-handle = <&phy_port2>; |
| 209 |
phy-mode = "internal"; |
| 210 |
|
| 211 |
status = "disabled"; |
| 212 |
}; |
| 213 |
|
| 214 |
switch_port4: port@4 { |
| 215 |
reg = <0x4>; |
| 216 |
phy-handle = <&phy_port3>; |
| 217 |
phy-mode = "internal"; |
| 218 |
|
| 219 |
status = "disabled"; |
| 220 |
}; |
| 221 |
}; |
| 222 |
|
| 223 |
mdio { |
| 224 |
#address-cells = <1>; |
| 225 |
#size-cells = <0>; |
| 226 |
|
| 227 |
interrupt-parent = <&switch10>; |
| 228 |
|
| 229 |
phy_port0: phy@0 { |
| 230 |
reg = <0x0>; |
| 231 |
interrupts = <0>; |
| 232 |
status = "disabled"; |
| 233 |
}; |
| 234 |
|
| 235 |
phy_port1: phy@1 { |
| 236 |
reg = <0x1>; |
| 237 |
interrupts = <0>; |
| 238 |
status = "disabled"; |
| 239 |
}; |
| 240 |
|
| 241 |
phy_port2: phy@2 { |
| 242 |
reg = <0x2>; |
| 243 |
interrupts = <0>; |
| 244 |
status = "disabled"; |
| 245 |
}; |
| 246 |
|
| 247 |
phy_port3: phy@3 { |
| 248 |
reg = <0x3>; |
| 249 |
interrupts = <0>; |
| 250 |
status = "disabled"; |
| 251 |
}; |
| 252 |
|
| 253 |
phy_port4: phy@4 { |
| 254 |
reg = <0x4>; |
| 255 |
interrupts = <0>; |
| 256 |
status = "disabled"; |
| 257 |
}; |
| 258 |
}; |
| 259 |
}; |
| 260 |
}; |
| 261 |
}; |
| 262 |
|
| 263 |
usb: usb@1b000100 { |
| 264 |
compatible = "chipidea,usb2"; |
| 265 |
reg = <0x1b000000 0x200>; |
| 266 |
|
| 267 |
interrupts = <3>; |
| 268 |
resets = <&rst 5>; |
| 269 |
|
| 270 |
phy-names = "usb-phy"; |
| 271 |
phys = <&usb_phy>; |
| 272 |
|
| 273 |
status = "disabled"; |
| 274 |
}; |
| 275 |
|
| 276 |
spi: spi@1f000000 { |
| 277 |
compatible = "qca,ar7100-spi"; |
| 278 |
reg = <0x1f000000 0x10>; |
| 279 |
|
| 280 |
clocks = <&pll ATH79_CLK_AHB>; |
| 281 |
clock-names = "ahb"; |
| 282 |
|
| 283 |
#address-cells = <1>; |
| 284 |
#size-cells = <0>; |
| 285 |
|
| 286 |
status = "disabled"; |
| 287 |
}; |
| 288 |
|
| 289 |
wifi: wifi@18100000 { |
| 290 |
compatible = "qca,ar9330-wifi"; |
| 291 |
reg = <0x18100000 0x20000>; |
| 292 |
|
| 293 |
interrupts = <2>; |
| 294 |
|
| 295 |
status = "disabled"; |
| 296 |
}; |
| 297 |
}; |
| 298 |
|
| 299 |
usb_phy: usb-phy { |
| 300 |
compatible = "qca,ar7100-usb-phy"; |
| 301 |
|
| 302 |
reset-names = "phy", "suspend-override"; |
| 303 |
resets = <&rst 4>, <&rst 3>; |
| 304 |
|
| 305 |
#phy-cells = <0>; |
| 306 |
|
| 307 |
status = "disabled"; |
| 308 |
}; |
| 309 |
}; |