| 1 |
// SPDX-License-Identifier: GPL-2.0 |
| 2 |
#include <dt-bindings/clock/ath79-clk.h> |
| 3 |
|
| 4 |
/ { |
| 5 |
compatible = "qca,ar9132"; |
| 6 |
|
| 7 |
#address-cells = <1>; |
| 8 |
#size-cells = <1>; |
| 9 |
|
| 10 |
cpus { |
| 11 |
#address-cells = <1>; |
| 12 |
#size-cells = <0>; |
| 13 |
|
| 14 |
cpu@0 { |
| 15 |
device_type = "cpu"; |
| 16 |
compatible = "mips,mips24Kc"; |
| 17 |
clocks = <&pll ATH79_CLK_CPU>; |
| 18 |
reg = <0>; |
| 19 |
}; |
| 20 |
}; |
| 21 |
|
| 22 |
cpuintc: interrupt-controller { |
| 23 |
compatible = "qca,ar9132-cpu-intc", "qca,ar7100-cpu-intc"; |
| 24 |
|
| 25 |
interrupt-controller; |
| 26 |
#interrupt-cells = <1>; |
| 27 |
|
| 28 |
qca,ddr-wb-channel-interrupts = <2>, <3>, <4>, <5>; |
| 29 |
qca,ddr-wb-channels = <&ddr_ctrl 3>, <&ddr_ctrl 2>, |
| 30 |
<&ddr_ctrl 0>, <&ddr_ctrl 1>; |
| 31 |
}; |
| 32 |
|
| 33 |
ahb { |
| 34 |
compatible = "simple-bus"; |
| 35 |
ranges; |
| 36 |
|
| 37 |
#address-cells = <1>; |
| 38 |
#size-cells = <1>; |
| 39 |
|
| 40 |
interrupt-parent = <&cpuintc>; |
| 41 |
|
| 42 |
apb { |
| 43 |
compatible = "simple-bus"; |
| 44 |
ranges; |
| 45 |
|
| 46 |
#address-cells = <1>; |
| 47 |
#size-cells = <1>; |
| 48 |
|
| 49 |
interrupt-parent = <&miscintc>; |
| 50 |
|
| 51 |
ddr_ctrl: memory-controller@18000000 { |
| 52 |
compatible = "qca,ar9132-ddr-controller", |
| 53 |
"qca,ar7240-ddr-controller"; |
| 54 |
reg = <0x18000000 0x100>; |
| 55 |
|
| 56 |
#qca,ddr-wb-channel-cells = <1>; |
| 57 |
}; |
| 58 |
|
| 59 |
uart: uart@18020000 { |
| 60 |
compatible = "ns8250"; |
| 61 |
reg = <0x18020000 0x20>; |
| 62 |
interrupts = <3>; |
| 63 |
|
| 64 |
clocks = <&pll ATH79_CLK_AHB>; |
| 65 |
clock-names = "uart"; |
| 66 |
|
| 67 |
reg-io-width = <4>; |
| 68 |
reg-shift = <2>; |
| 69 |
no-loopback-test; |
| 70 |
|
| 71 |
status = "disabled"; |
| 72 |
}; |
| 73 |
|
| 74 |
gpio: gpio@18040000 { |
| 75 |
compatible = "qca,ar9132-gpio", |
| 76 |
"qca,ar7100-gpio"; |
| 77 |
reg = <0x18040000 0x30>; |
| 78 |
interrupts = <2>; |
| 79 |
|
| 80 |
ngpios = <22>; |
| 81 |
|
| 82 |
gpio-controller; |
| 83 |
#gpio-cells = <2>; |
| 84 |
|
| 85 |
interrupt-controller; |
| 86 |
#interrupt-cells = <2>; |
| 87 |
}; |
| 88 |
|
| 89 |
pll: pll-controller@18050000 { |
| 90 |
compatible = "qca,ar9132-pll", |
| 91 |
"qca,ar9130-pll"; |
| 92 |
reg = <0x18050000 0x20>; |
| 93 |
|
| 94 |
clock-names = "ref"; |
| 95 |
/* The board must provides the ref clock */ |
| 96 |
|
| 97 |
#clock-cells = <1>; |
| 98 |
clock-output-names = "cpu", "ddr", "ahb"; |
| 99 |
}; |
| 100 |
|
| 101 |
wdt: wdt@18060008 { |
| 102 |
compatible = "qca,ar7130-wdt"; |
| 103 |
reg = <0x18060008 0x8>; |
| 104 |
|
| 105 |
interrupts = <4>; |
| 106 |
|
| 107 |
clocks = <&pll ATH79_CLK_AHB>; |
| 108 |
clock-names = "wdt"; |
| 109 |
}; |
| 110 |
|
| 111 |
miscintc: interrupt-controller@18060010 { |
| 112 |
compatible = "qca,ar9132-misc-intc", |
| 113 |
"qca,ar7100-misc-intc"; |
| 114 |
reg = <0x18060010 0x8>; |
| 115 |
|
| 116 |
interrupt-parent = <&cpuintc>; |
| 117 |
interrupts = <6>; |
| 118 |
|
| 119 |
interrupt-controller; |
| 120 |
#interrupt-cells = <1>; |
| 121 |
}; |
| 122 |
|
| 123 |
rst: reset-controller@1806001c { |
| 124 |
compatible = "qca,ar9132-reset", |
| 125 |
"qca,ar7100-reset"; |
| 126 |
reg = <0x1806001c 0x4>; |
| 127 |
|
| 128 |
#reset-cells = <1>; |
| 129 |
}; |
| 130 |
}; |
| 131 |
|
| 132 |
usb: usb@1b000100 { |
| 133 |
compatible = "qca,ar7100-ehci", "generic-ehci"; |
| 134 |
reg = <0x1b000100 0x100>; |
| 135 |
|
| 136 |
interrupts = <3>; |
| 137 |
resets = <&rst 5>; |
| 138 |
|
| 139 |
has-transaction-translator; |
| 140 |
|
| 141 |
phy-names = "usb"; |
| 142 |
phys = <&usb_phy>; |
| 143 |
|
| 144 |
status = "disabled"; |
| 145 |
}; |
| 146 |
|
| 147 |
spi: spi@1f000000 { |
| 148 |
compatible = "qca,ar9132-spi", "qca,ar7100-spi"; |
| 149 |
reg = <0x1f000000 0x10>; |
| 150 |
|
| 151 |
clocks = <&pll ATH79_CLK_AHB>; |
| 152 |
clock-names = "ahb"; |
| 153 |
|
| 154 |
status = "disabled"; |
| 155 |
|
| 156 |
#address-cells = <1>; |
| 157 |
#size-cells = <0>; |
| 158 |
}; |
| 159 |
|
| 160 |
wifi: wifi@180c0000 { |
| 161 |
compatible = "qca,ar9130-wifi"; |
| 162 |
reg = <0x180c0000 0x230000>; |
| 163 |
|
| 164 |
interrupts = <2>; |
| 165 |
|
| 166 |
status = "disabled"; |
| 167 |
}; |
| 168 |
}; |
| 169 |
|
| 170 |
usb_phy: usb-phy { |
| 171 |
compatible = "qca,ar7100-usb-phy"; |
| 172 |
|
| 173 |
reset-names = "phy", "suspend-override"; |
| 174 |
resets = <&rst 4>, <&rst 3>; |
| 175 |
|
| 176 |
#phy-cells = <0>; |
| 177 |
|
| 178 |
status = "disabled"; |
| 179 |
}; |
| 180 |
}; |