| 1 |
// SPDX-License-Identifier: GPL-2.0 |
| 2 |
/ { |
| 3 |
#address-cells = <1>; |
| 4 |
#size-cells = <1>; |
| 5 |
compatible = "brcm,bcm7420"; |
| 6 |
|
| 7 |
cpus { |
| 8 |
#address-cells = <1>; |
| 9 |
#size-cells = <0>; |
| 10 |
|
| 11 |
mips-hpt-frequency = <93750000>; |
| 12 |
|
| 13 |
cpu@0 { |
| 14 |
compatible = "brcm,bmips5000"; |
| 15 |
device_type = "cpu"; |
| 16 |
reg = <0>; |
| 17 |
}; |
| 18 |
|
| 19 |
cpu@1 { |
| 20 |
compatible = "brcm,bmips5000"; |
| 21 |
device_type = "cpu"; |
| 22 |
reg = <1>; |
| 23 |
}; |
| 24 |
}; |
| 25 |
|
| 26 |
aliases { |
| 27 |
uart0 = &uart0; |
| 28 |
}; |
| 29 |
|
| 30 |
cpu_intc: interrupt-controller { |
| 31 |
#address-cells = <0>; |
| 32 |
compatible = "mti,cpu-interrupt-controller"; |
| 33 |
|
| 34 |
interrupt-controller; |
| 35 |
#interrupt-cells = <1>; |
| 36 |
}; |
| 37 |
|
| 38 |
clocks { |
| 39 |
uart_clk: uart_clk { |
| 40 |
compatible = "fixed-clock"; |
| 41 |
#clock-cells = <0>; |
| 42 |
clock-frequency = <81000000>; |
| 43 |
}; |
| 44 |
|
| 45 |
upg_clk: upg_clk { |
| 46 |
compatible = "fixed-clock"; |
| 47 |
#clock-cells = <0>; |
| 48 |
clock-frequency = <27000000>; |
| 49 |
}; |
| 50 |
}; |
| 51 |
|
| 52 |
rdb { |
| 53 |
#address-cells = <1>; |
| 54 |
#size-cells = <1>; |
| 55 |
|
| 56 |
compatible = "simple-bus"; |
| 57 |
ranges = <0 0x10000000 0x01000000>; |
| 58 |
|
| 59 |
periph_intc: interrupt-controller@441400 { |
| 60 |
compatible = "brcm,bcm7038-l1-intc"; |
| 61 |
reg = <0x441400 0x30>, <0x441600 0x30>; |
| 62 |
|
| 63 |
interrupt-controller; |
| 64 |
#interrupt-cells = <1>; |
| 65 |
|
| 66 |
interrupt-parent = <&cpu_intc>; |
| 67 |
interrupts = <2>, <3>; |
| 68 |
}; |
| 69 |
|
| 70 |
sun_l2_intc: interrupt-controller@401800 { |
| 71 |
compatible = "brcm,l2-intc"; |
| 72 |
reg = <0x401800 0x30>; |
| 73 |
interrupt-controller; |
| 74 |
#interrupt-cells = <1>; |
| 75 |
interrupt-parent = <&periph_intc>; |
| 76 |
interrupts = <23>; |
| 77 |
}; |
| 78 |
|
| 79 |
gisb-arb@400000 { |
| 80 |
compatible = "brcm,bcm7400-gisb-arb"; |
| 81 |
reg = <0x400000 0xdc>; |
| 82 |
native-endian; |
| 83 |
interrupt-parent = <&sun_l2_intc>; |
| 84 |
interrupts = <0>, <2>; |
| 85 |
brcm,gisb-arb-master-mask = <0x3ff>; |
| 86 |
brcm,gisb-arb-master-names = "ssp_0", "cpu_0", "pci_0", |
| 87 |
"pcie_0", "bsp_0", "rdc_0", |
| 88 |
"rptd_0", "avd_0", "avd_1", |
| 89 |
"jtag_0"; |
| 90 |
}; |
| 91 |
|
| 92 |
upg_irq0_intc: interrupt-controller@406780 { |
| 93 |
compatible = "brcm,bcm7120-l2-intc"; |
| 94 |
reg = <0x406780 0x8>; |
| 95 |
|
| 96 |
brcm,int-map-mask = <0x44>, <0x1f000000>, <0x100000>; |
| 97 |
brcm,int-fwd-mask = <0x70000>; |
| 98 |
|
| 99 |
interrupt-controller; |
| 100 |
#interrupt-cells = <1>; |
| 101 |
|
| 102 |
interrupt-parent = <&periph_intc>; |
| 103 |
interrupts = <18>, <19>, <20>; |
| 104 |
interrupt-names = "upg_main", "upg_bsc", "upg_spi"; |
| 105 |
}; |
| 106 |
|
| 107 |
sun_top_ctrl: syscon@404000 { |
| 108 |
compatible = "brcm,bcm7420-sun-top-ctrl", "syscon"; |
| 109 |
reg = <0x404000 0x60c>; |
| 110 |
native-endian; |
| 111 |
}; |
| 112 |
|
| 113 |
reboot { |
| 114 |
compatible = "brcm,bcm7038-reboot"; |
| 115 |
syscon = <&sun_top_ctrl 0x8 0x14>; |
| 116 |
}; |
| 117 |
|
| 118 |
uart0: serial@406b00 { |
| 119 |
compatible = "ns16550a"; |
| 120 |
reg = <0x406b00 0x20>; |
| 121 |
reg-io-width = <0x4>; |
| 122 |
reg-shift = <0x2>; |
| 123 |
interrupt-parent = <&periph_intc>; |
| 124 |
interrupts = <21>; |
| 125 |
clocks = <&uart_clk>; |
| 126 |
status = "disabled"; |
| 127 |
}; |
| 128 |
|
| 129 |
uart1: serial@406b40 { |
| 130 |
compatible = "ns16550a"; |
| 131 |
reg = <0x406b40 0x20>; |
| 132 |
reg-io-width = <0x4>; |
| 133 |
reg-shift = <0x2>; |
| 134 |
interrupt-parent = <&periph_intc>; |
| 135 |
interrupts = <64>; |
| 136 |
clocks = <&uart_clk>; |
| 137 |
status = "disabled"; |
| 138 |
}; |
| 139 |
|
| 140 |
uart2: serial@406b80 { |
| 141 |
compatible = "ns16550a"; |
| 142 |
reg = <0x406b80 0x20>; |
| 143 |
reg-io-width = <0x4>; |
| 144 |
reg-shift = <0x2>; |
| 145 |
interrupt-parent = <&periph_intc>; |
| 146 |
interrupts = <65>; |
| 147 |
clocks = <&uart_clk>; |
| 148 |
status = "disabled"; |
| 149 |
}; |
| 150 |
|
| 151 |
bsca: i2c@406200 { |
| 152 |
clock-frequency = <390000>; |
| 153 |
compatible = "brcm,brcmstb-i2c"; |
| 154 |
interrupt-parent = <&upg_irq0_intc>; |
| 155 |
reg = <0x406200 0x58>; |
| 156 |
interrupts = <24>; |
| 157 |
interrupt-names = "upg_bsca"; |
| 158 |
status = "disabled"; |
| 159 |
}; |
| 160 |
|
| 161 |
bscb: i2c@406280 { |
| 162 |
clock-frequency = <390000>; |
| 163 |
compatible = "brcm,brcmstb-i2c"; |
| 164 |
interrupt-parent = <&upg_irq0_intc>; |
| 165 |
reg = <0x406280 0x58>; |
| 166 |
interrupts = <25>; |
| 167 |
interrupt-names = "upg_bscb"; |
| 168 |
status = "disabled"; |
| 169 |
}; |
| 170 |
|
| 171 |
bscc: i2c@406300 { |
| 172 |
clock-frequency = <390000>; |
| 173 |
compatible = "brcm,brcmstb-i2c"; |
| 174 |
interrupt-parent = <&upg_irq0_intc>; |
| 175 |
reg = <0x406300 0x58>; |
| 176 |
interrupts = <26>; |
| 177 |
interrupt-names = "upg_bscc"; |
| 178 |
status = "disabled"; |
| 179 |
}; |
| 180 |
|
| 181 |
bscd: i2c@406380 { |
| 182 |
clock-frequency = <390000>; |
| 183 |
compatible = "brcm,brcmstb-i2c"; |
| 184 |
interrupt-parent = <&upg_irq0_intc>; |
| 185 |
reg = <0x406380 0x58>; |
| 186 |
interrupts = <27>; |
| 187 |
interrupt-names = "upg_bscd"; |
| 188 |
status = "disabled"; |
| 189 |
}; |
| 190 |
|
| 191 |
bsce: i2c@406800 { |
| 192 |
clock-frequency = <390000>; |
| 193 |
compatible = "brcm,brcmstb-i2c"; |
| 194 |
interrupt-parent = <&upg_irq0_intc>; |
| 195 |
reg = <0x406800 0x58>; |
| 196 |
interrupts = <28>; |
| 197 |
interrupt-names = "upg_bsce"; |
| 198 |
status = "disabled"; |
| 199 |
}; |
| 200 |
|
| 201 |
pwma: pwm@406580 { |
| 202 |
compatible = "brcm,bcm7038-pwm"; |
| 203 |
reg = <0x406580 0x28>; |
| 204 |
#pwm-cells = <2>; |
| 205 |
clocks = <&upg_clk>; |
| 206 |
status = "disabled"; |
| 207 |
}; |
| 208 |
|
| 209 |
pwmb: pwm@406880 { |
| 210 |
compatible = "brcm,bcm7038-pwm"; |
| 211 |
reg = <0x406880 0x28>; |
| 212 |
#pwm-cells = <2>; |
| 213 |
clocks = <&upg_clk>; |
| 214 |
status = "disabled"; |
| 215 |
}; |
| 216 |
|
| 217 |
watchdog: watchdog@4067e8 { |
| 218 |
clocks = <&upg_clk>; |
| 219 |
compatible = "brcm,bcm7038-wdt"; |
| 220 |
reg = <0x4067e8 0x14>; |
| 221 |
status = "disabled"; |
| 222 |
}; |
| 223 |
|
| 224 |
upg_gio: gpio@406700 { |
| 225 |
compatible = "brcm,brcmstb-gpio"; |
| 226 |
reg = <0x406700 0x80>; |
| 227 |
#gpio-cells = <2>; |
| 228 |
#interrupt-cells = <2>; |
| 229 |
gpio-controller; |
| 230 |
interrupt-controller; |
| 231 |
interrupt-parent = <&upg_irq0_intc>; |
| 232 |
interrupts = <6>; |
| 233 |
brcm,gpio-bank-widths = <32 32 32 27>; |
| 234 |
}; |
| 235 |
|
| 236 |
enet0: ethernet@468000 { |
| 237 |
phy-mode = "internal"; |
| 238 |
phy-handle = <&phy1>; |
| 239 |
mac-address = [ 00 10 18 36 23 1a ]; |
| 240 |
compatible = "brcm,genet-v1"; |
| 241 |
#address-cells = <0x1>; |
| 242 |
#size-cells = <0x1>; |
| 243 |
reg = <0x468000 0x3c8c>; |
| 244 |
interrupts = <69>, <79>; |
| 245 |
interrupt-parent = <&periph_intc>; |
| 246 |
status = "disabled"; |
| 247 |
|
| 248 |
mdio@e14 { |
| 249 |
compatible = "brcm,genet-mdio-v1"; |
| 250 |
#address-cells = <0x1>; |
| 251 |
#size-cells = <0x0>; |
| 252 |
reg = <0xe14 0x8>; |
| 253 |
|
| 254 |
phy1: ethernet-phy@1 { |
| 255 |
max-speed = <100>; |
| 256 |
reg = <0x1>; |
| 257 |
compatible = "brcm,65nm-ephy", |
| 258 |
"ethernet-phy-ieee802.3-c22"; |
| 259 |
}; |
| 260 |
}; |
| 261 |
}; |
| 262 |
|
| 263 |
ehci0: usb@488300 { |
| 264 |
compatible = "brcm,bcm7420-ehci", "generic-ehci"; |
| 265 |
reg = <0x488300 0x100>; |
| 266 |
interrupt-parent = <&periph_intc>; |
| 267 |
interrupts = <60>; |
| 268 |
status = "disabled"; |
| 269 |
}; |
| 270 |
|
| 271 |
ohci0: usb@488400 { |
| 272 |
compatible = "brcm,bcm7420-ohci", "generic-ohci"; |
| 273 |
reg = <0x488400 0x100>; |
| 274 |
native-endian; |
| 275 |
no-big-frame-no; |
| 276 |
interrupt-parent = <&periph_intc>; |
| 277 |
interrupts = <61>; |
| 278 |
status = "disabled"; |
| 279 |
}; |
| 280 |
|
| 281 |
ehci1: usb@488500 { |
| 282 |
compatible = "brcm,bcm7420-ehci", "generic-ehci"; |
| 283 |
reg = <0x488500 0x100>; |
| 284 |
interrupt-parent = <&periph_intc>; |
| 285 |
interrupts = <55>; |
| 286 |
status = "disabled"; |
| 287 |
}; |
| 288 |
|
| 289 |
ohci1: usb@488600 { |
| 290 |
compatible = "brcm,bcm7420-ohci", "generic-ohci"; |
| 291 |
reg = <0x488600 0x100>; |
| 292 |
native-endian; |
| 293 |
no-big-frame-no; |
| 294 |
interrupt-parent = <&periph_intc>; |
| 295 |
interrupts = <62>; |
| 296 |
status = "disabled"; |
| 297 |
}; |
| 298 |
|
| 299 |
spi_l2_intc: interrupt-controller@411d00 { |
| 300 |
compatible = "brcm,l2-intc"; |
| 301 |
reg = <0x411d00 0x30>; |
| 302 |
interrupt-controller; |
| 303 |
#interrupt-cells = <1>; |
| 304 |
interrupt-parent = <&periph_intc>; |
| 305 |
interrupts = <78>; |
| 306 |
}; |
| 307 |
|
| 308 |
qspi: spi@443000 { |
| 309 |
#address-cells = <0x1>; |
| 310 |
#size-cells = <0x0>; |
| 311 |
compatible = "brcm,spi-bcm-qspi", |
| 312 |
"brcm,spi-brcmstb-qspi"; |
| 313 |
clocks = <&upg_clk>; |
| 314 |
reg = <0x440920 0x4 0x443200 0x188 0x443000 0x50>; |
| 315 |
reg-names = "cs_reg", "hif_mspi", "bspi"; |
| 316 |
interrupts = <0x0 0x1 0x2 0x3 0x4 0x5 0x6>; |
| 317 |
interrupt-parent = <&spi_l2_intc>; |
| 318 |
interrupt-names = "spi_lr_fullness_reached", |
| 319 |
"spi_lr_session_aborted", |
| 320 |
"spi_lr_impatient", |
| 321 |
"spi_lr_session_done", |
| 322 |
"spi_lr_overread", |
| 323 |
"mspi_done", |
| 324 |
"mspi_halted"; |
| 325 |
status = "disabled"; |
| 326 |
}; |
| 327 |
|
| 328 |
mspi: spi@406400 { |
| 329 |
#address-cells = <1>; |
| 330 |
#size-cells = <0>; |
| 331 |
compatible = "brcm,spi-bcm-qspi", |
| 332 |
"brcm,spi-brcmstb-mspi"; |
| 333 |
clocks = <&upg_clk>; |
| 334 |
reg = <0x406400 0x180>; |
| 335 |
reg-names = "mspi"; |
| 336 |
interrupts = <0x14>; |
| 337 |
interrupt-parent = <&upg_irq0_intc>; |
| 338 |
interrupt-names = "mspi_done"; |
| 339 |
status = "disabled"; |
| 340 |
}; |
| 341 |
}; |
| 342 |
}; |