| 1 |
// SPDX-License-Identifier: GPL-2.0 |
| 2 |
|
| 3 |
#include "dt-bindings/clock/bcm6362-clock.h" |
| 4 |
#include "dt-bindings/reset/bcm6362-reset.h" |
| 5 |
#include "dt-bindings/soc/bcm6362-pm.h" |
| 6 |
|
| 7 |
/ { |
| 8 |
#address-cells = <1>; |
| 9 |
#size-cells = <1>; |
| 10 |
compatible = "brcm,bcm6362"; |
| 11 |
|
| 12 |
cpus { |
| 13 |
#address-cells = <1>; |
| 14 |
#size-cells = <0>; |
| 15 |
|
| 16 |
mips-hpt-frequency = <200000000>; |
| 17 |
|
| 18 |
cpu@0 { |
| 19 |
compatible = "brcm,bmips4350"; |
| 20 |
device_type = "cpu"; |
| 21 |
reg = <0>; |
| 22 |
}; |
| 23 |
|
| 24 |
cpu@1 { |
| 25 |
compatible = "brcm,bmips4350"; |
| 26 |
device_type = "cpu"; |
| 27 |
reg = <1>; |
| 28 |
}; |
| 29 |
}; |
| 30 |
|
| 31 |
clocks { |
| 32 |
periph_osc: periph-osc { |
| 33 |
compatible = "fixed-clock"; |
| 34 |
#clock-cells = <0>; |
| 35 |
clock-frequency = <50000000>; |
| 36 |
clock-output-names = "periph"; |
| 37 |
}; |
| 38 |
|
| 39 |
hsspi_osc: hsspi-osc { |
| 40 |
compatible = "fixed-clock"; |
| 41 |
|
| 42 |
#clock-cells = <0>; |
| 43 |
|
| 44 |
clock-frequency = <400000000>; |
| 45 |
clock-output-names = "hsspi_osc"; |
| 46 |
}; |
| 47 |
}; |
| 48 |
|
| 49 |
aliases { |
| 50 |
nflash = &nflash; |
| 51 |
serial0 = &uart0; |
| 52 |
serial1 = &uart1; |
| 53 |
spi0 = &lsspi; |
| 54 |
spi1 = &hsspi; |
| 55 |
}; |
| 56 |
|
| 57 |
cpu_intc: interrupt-controller { |
| 58 |
#address-cells = <0>; |
| 59 |
compatible = "mti,cpu-interrupt-controller"; |
| 60 |
|
| 61 |
interrupt-controller; |
| 62 |
#interrupt-cells = <1>; |
| 63 |
}; |
| 64 |
|
| 65 |
ubus { |
| 66 |
#address-cells = <1>; |
| 67 |
#size-cells = <1>; |
| 68 |
|
| 69 |
compatible = "simple-bus"; |
| 70 |
ranges; |
| 71 |
|
| 72 |
periph_clk: clock-controller@10000004 { |
| 73 |
compatible = "brcm,bcm6362-clocks"; |
| 74 |
reg = <0x10000004 0x4>; |
| 75 |
#clock-cells = <1>; |
| 76 |
}; |
| 77 |
|
| 78 |
pll_cntl: syscon@10000008 { |
| 79 |
compatible = "syscon"; |
| 80 |
reg = <0x10000008 0x4>; |
| 81 |
native-endian; |
| 82 |
|
| 83 |
reboot { |
| 84 |
compatible = "syscon-reboot"; |
| 85 |
offset = <0x0>; |
| 86 |
mask = <0x1>; |
| 87 |
}; |
| 88 |
}; |
| 89 |
|
| 90 |
periph_rst: reset-controller@10000010 { |
| 91 |
compatible = "brcm,bcm6345-reset"; |
| 92 |
reg = <0x10000010 0x4>; |
| 93 |
#reset-cells = <1>; |
| 94 |
}; |
| 95 |
|
| 96 |
periph_intc: interrupt-controller@10000020 { |
| 97 |
compatible = "brcm,bcm6345-l1-intc"; |
| 98 |
reg = <0x10000020 0x10>, |
| 99 |
<0x10000030 0x10>; |
| 100 |
|
| 101 |
interrupt-controller; |
| 102 |
#interrupt-cells = <1>; |
| 103 |
|
| 104 |
interrupt-parent = <&cpu_intc>; |
| 105 |
interrupts = <2>, <3>; |
| 106 |
}; |
| 107 |
|
| 108 |
wdt: watchdog@1000005c { |
| 109 |
compatible = "brcm,bcm7038-wdt"; |
| 110 |
reg = <0x1000005c 0xc>; |
| 111 |
|
| 112 |
clocks = <&periph_osc>; |
| 113 |
clock-names = "refclk"; |
| 114 |
|
| 115 |
timeout-sec = <30>; |
| 116 |
}; |
| 117 |
|
| 118 |
uart0: serial@10000100 { |
| 119 |
compatible = "brcm,bcm6345-uart"; |
| 120 |
reg = <0x10000100 0x18>; |
| 121 |
|
| 122 |
interrupt-parent = <&periph_intc>; |
| 123 |
interrupts = <3>; |
| 124 |
|
| 125 |
clocks = <&periph_osc>; |
| 126 |
clock-names = "refclk"; |
| 127 |
|
| 128 |
status = "disabled"; |
| 129 |
}; |
| 130 |
|
| 131 |
uart1: serial@10000120 { |
| 132 |
compatible = "brcm,bcm6345-uart"; |
| 133 |
reg = <0x10000120 0x18>; |
| 134 |
|
| 135 |
interrupt-parent = <&periph_intc>; |
| 136 |
interrupts = <4>; |
| 137 |
|
| 138 |
clocks = <&periph_osc>; |
| 139 |
clock-names = "refclk"; |
| 140 |
|
| 141 |
status = "disabled"; |
| 142 |
}; |
| 143 |
|
| 144 |
nflash: nand@10000200 { |
| 145 |
#address-cells = <1>; |
| 146 |
#size-cells = <0>; |
| 147 |
compatible = "brcm,nand-bcm6368", |
| 148 |
"brcm,brcmnand-v2.2", |
| 149 |
"brcm,brcmnand"; |
| 150 |
reg = <0x10000200 0x180>, |
| 151 |
<0x10000600 0x200>, |
| 152 |
<0x10000070 0x10>; |
| 153 |
reg-names = "nand", |
| 154 |
"nand-cache", |
| 155 |
"nand-int-base"; |
| 156 |
|
| 157 |
interrupt-parent = <&periph_intc>; |
| 158 |
interrupts = <12>; |
| 159 |
|
| 160 |
clocks = <&periph_clk BCM6362_CLK_NAND>; |
| 161 |
clock-names = "nand"; |
| 162 |
|
| 163 |
status = "disabled"; |
| 164 |
}; |
| 165 |
|
| 166 |
lsspi: spi@10000800 { |
| 167 |
#address-cells = <1>; |
| 168 |
#size-cells = <0>; |
| 169 |
compatible = "brcm,bcm6358-spi"; |
| 170 |
reg = <0x10000800 0x70c>; |
| 171 |
|
| 172 |
interrupt-parent = <&periph_intc>; |
| 173 |
interrupts = <2>; |
| 174 |
|
| 175 |
clocks = <&periph_clk BCM6362_CLK_SPI>; |
| 176 |
clock-names = "spi"; |
| 177 |
|
| 178 |
resets = <&periph_rst BCM6362_RST_SPI>; |
| 179 |
reset-names = "spi"; |
| 180 |
|
| 181 |
status = "disabled"; |
| 182 |
}; |
| 183 |
|
| 184 |
hsspi: spi@10001000 { |
| 185 |
#address-cells = <1>; |
| 186 |
#size-cells = <0>; |
| 187 |
compatible = "brcm,bcm6328-hsspi"; |
| 188 |
reg = <0x10001000 0x600>; |
| 189 |
|
| 190 |
interrupt-parent = <&periph_intc>; |
| 191 |
interrupts = <5>; |
| 192 |
|
| 193 |
clocks = <&periph_clk BCM6362_CLK_HSSPI>, |
| 194 |
<&hsspi_osc>; |
| 195 |
clock-names = "hsspi", |
| 196 |
"pll"; |
| 197 |
|
| 198 |
resets = <&periph_rst BCM6362_RST_SPI>; |
| 199 |
reset-names = "hsspi"; |
| 200 |
|
| 201 |
status = "disabled"; |
| 202 |
}; |
| 203 |
|
| 204 |
periph_pwr: power-controller@10001848 { |
| 205 |
compatible = "brcm,bcm6362-power-controller"; |
| 206 |
reg = <0x10001848 0x4>; |
| 207 |
#power-domain-cells = <1>; |
| 208 |
}; |
| 209 |
|
| 210 |
leds0: led-controller@10001900 { |
| 211 |
#address-cells = <1>; |
| 212 |
#size-cells = <0>; |
| 213 |
compatible = "brcm,bcm6328-leds"; |
| 214 |
reg = <0x10001900 0x24>; |
| 215 |
|
| 216 |
status = "disabled"; |
| 217 |
}; |
| 218 |
|
| 219 |
ehci: usb@10002500 { |
| 220 |
compatible = "brcm,bcm6362-ehci", "generic-ehci"; |
| 221 |
reg = <0x10002500 0x100>; |
| 222 |
big-endian; |
| 223 |
|
| 224 |
interrupt-parent = <&periph_intc>; |
| 225 |
interrupts = <10>; |
| 226 |
|
| 227 |
phys = <&usbh 0>; |
| 228 |
phy-names = "usb"; |
| 229 |
|
| 230 |
status = "disabled"; |
| 231 |
}; |
| 232 |
|
| 233 |
ohci: usb@10002600 { |
| 234 |
compatible = "brcm,bcm6362-ohci", "generic-ohci"; |
| 235 |
reg = <0x10002600 0x100>; |
| 236 |
big-endian; |
| 237 |
no-big-frame-no; |
| 238 |
|
| 239 |
interrupt-parent = <&periph_intc>; |
| 240 |
interrupts = <9>; |
| 241 |
|
| 242 |
phys = <&usbh 0>; |
| 243 |
phy-names = "usb"; |
| 244 |
|
| 245 |
status = "disabled"; |
| 246 |
}; |
| 247 |
|
| 248 |
usbh: usb-phy@10002700 { |
| 249 |
compatible = "brcm,bcm6362-usbh-phy"; |
| 250 |
reg = <0x10002700 0x38>; |
| 251 |
|
| 252 |
#phy-cells = <1>; |
| 253 |
|
| 254 |
clocks = <&periph_clk BCM6362_CLK_USBH>; |
| 255 |
clock-names = "usbh"; |
| 256 |
|
| 257 |
power-domains = <&periph_pwr BCM6362_POWER_DOMAIN_USBH>; |
| 258 |
|
| 259 |
resets = <&periph_rst BCM6362_RST_USBH>; |
| 260 |
reset-names = "usbh"; |
| 261 |
|
| 262 |
status = "disabled"; |
| 263 |
}; |
| 264 |
}; |
| 265 |
}; |