| 1 |
// SPDX-License-Identifier: GPL-2.0-only |
| 2 |
/* |
| 3 |
* Copyright (c) 2016 BayLibre, Inc. |
| 4 |
*/ |
| 5 |
/dts-v1/; |
| 6 |
#include "da850.dtsi" |
| 7 |
#include <dt-bindings/gpio/gpio.h> |
| 8 |
#include <dt-bindings/input/input.h> |
| 9 |
|
| 10 |
/ { |
| 11 |
model = "DA850/AM1808/OMAP-L138 LCDK"; |
| 12 |
compatible = "ti,da850-lcdk", "ti,da850"; |
| 13 |
|
| 14 |
aliases { |
| 15 |
serial2 = &serial2; |
| 16 |
ethernet0 = ð0; |
| 17 |
}; |
| 18 |
|
| 19 |
chosen { |
| 20 |
stdout-path = "serial2:115200n8"; |
| 21 |
}; |
| 22 |
|
| 23 |
memory@c0000000 { |
| 24 |
/* 128 MB DDR2 SDRAM @ 0xc0000000 */ |
| 25 |
reg = <0xc0000000 0x08000000>; |
| 26 |
}; |
| 27 |
|
| 28 |
reserved-memory { |
| 29 |
#address-cells = <1>; |
| 30 |
#size-cells = <1>; |
| 31 |
ranges; |
| 32 |
|
| 33 |
dsp_memory_region: dsp-memory@c3000000 { |
| 34 |
compatible = "shared-dma-pool"; |
| 35 |
reg = <0xc3000000 0x1000000>; |
| 36 |
reusable; |
| 37 |
status = "okay"; |
| 38 |
}; |
| 39 |
}; |
| 40 |
|
| 41 |
vcc_5vd: fixedregulator-vcc_5vd { |
| 42 |
compatible = "regulator-fixed"; |
| 43 |
regulator-name = "vcc_5vd"; |
| 44 |
regulator-min-microvolt = <5000000>; |
| 45 |
regulator-max-microvolt = <5000000>; |
| 46 |
regulator-boot-on; |
| 47 |
}; |
| 48 |
|
| 49 |
vcc_3v3d: fixedregulator-vcc_3v3d { |
| 50 |
/* TPS650250 - VDCDC1 */ |
| 51 |
compatible = "regulator-fixed"; |
| 52 |
regulator-name = "vcc_3v3d"; |
| 53 |
regulator-min-microvolt = <3300000>; |
| 54 |
regulator-max-microvolt = <3300000>; |
| 55 |
vin-supply = <&vcc_5vd>; |
| 56 |
regulator-always-on; |
| 57 |
regulator-boot-on; |
| 58 |
}; |
| 59 |
|
| 60 |
vcc_1v8d: fixedregulator-vcc_1v8d { |
| 61 |
/* TPS650250 - VDCDC2 */ |
| 62 |
compatible = "regulator-fixed"; |
| 63 |
regulator-name = "vcc_1v8d"; |
| 64 |
regulator-min-microvolt = <1800000>; |
| 65 |
regulator-max-microvolt = <1800000>; |
| 66 |
vin-supply = <&vcc_5vd>; |
| 67 |
regulator-always-on; |
| 68 |
regulator-boot-on; |
| 69 |
}; |
| 70 |
|
| 71 |
sound { |
| 72 |
compatible = "simple-audio-card"; |
| 73 |
simple-audio-card,name = "DA850-OMAPL138 LCDK"; |
| 74 |
simple-audio-card,widgets = |
| 75 |
"Line", "Line In", |
| 76 |
"Line", "Line Out", |
| 77 |
"Microphone", "Mic Jack"; |
| 78 |
simple-audio-card,routing = |
| 79 |
"LINE1L", "Line In", |
| 80 |
"LINE1R", "Line In", |
| 81 |
"Line Out", "LLOUT", |
| 82 |
"Line Out", "RLOUT", |
| 83 |
"MIC3L", "Mic Jack", |
| 84 |
"MIC3R", "Mic Jack", |
| 85 |
"Mic Jack", "Mic Bias"; |
| 86 |
simple-audio-card,format = "dsp_b"; |
| 87 |
simple-audio-card,bitclock-master = <&link0_codec>; |
| 88 |
simple-audio-card,frame-master = <&link0_codec>; |
| 89 |
simple-audio-card,bitclock-inversion; |
| 90 |
|
| 91 |
simple-audio-card,cpu { |
| 92 |
sound-dai = <&mcasp0>; |
| 93 |
system-clock-frequency = <24576000>; |
| 94 |
}; |
| 95 |
|
| 96 |
link0_codec: simple-audio-card,codec { |
| 97 |
sound-dai = <&tlv320aic3106>; |
| 98 |
system-clock-frequency = <24576000>; |
| 99 |
}; |
| 100 |
}; |
| 101 |
|
| 102 |
gpio-keys { |
| 103 |
compatible = "gpio-keys"; |
| 104 |
autorepeat; |
| 105 |
|
| 106 |
user1 { |
| 107 |
label = "GPIO Key USER1"; |
| 108 |
linux,code = <BTN_0>; |
| 109 |
gpios = <&gpio 36 GPIO_ACTIVE_LOW>; |
| 110 |
}; |
| 111 |
|
| 112 |
user2 { |
| 113 |
label = "GPIO Key USER2"; |
| 114 |
linux,code = <BTN_1>; |
| 115 |
gpios = <&gpio 37 GPIO_ACTIVE_LOW>; |
| 116 |
}; |
| 117 |
}; |
| 118 |
|
| 119 |
vga-bridge { |
| 120 |
compatible = "ti,ths8135"; |
| 121 |
#address-cells = <1>; |
| 122 |
#size-cells = <0>; |
| 123 |
|
| 124 |
ports { |
| 125 |
#address-cells = <1>; |
| 126 |
#size-cells = <0>; |
| 127 |
|
| 128 |
port@0 { |
| 129 |
reg = <0>; |
| 130 |
|
| 131 |
vga_bridge_in: endpoint { |
| 132 |
remote-endpoint = <&lcdc_out_vga>; |
| 133 |
}; |
| 134 |
}; |
| 135 |
|
| 136 |
port@1 { |
| 137 |
reg = <1>; |
| 138 |
|
| 139 |
vga_bridge_out: endpoint { |
| 140 |
remote-endpoint = <&vga_con_in>; |
| 141 |
}; |
| 142 |
}; |
| 143 |
}; |
| 144 |
}; |
| 145 |
|
| 146 |
vga { |
| 147 |
compatible = "vga-connector"; |
| 148 |
|
| 149 |
ddc-i2c-bus = <&i2c0>; |
| 150 |
|
| 151 |
port { |
| 152 |
vga_con_in: endpoint { |
| 153 |
remote-endpoint = <&vga_bridge_out>; |
| 154 |
}; |
| 155 |
}; |
| 156 |
}; |
| 157 |
|
| 158 |
cvdd: regulator0 { |
| 159 |
compatible = "regulator-fixed"; |
| 160 |
regulator-name = "cvdd"; |
| 161 |
regulator-min-microvolt = <1300000>; |
| 162 |
regulator-max-microvolt = <1300000>; |
| 163 |
regulator-always-on; |
| 164 |
regulator-boot-on; |
| 165 |
}; |
| 166 |
}; |
| 167 |
|
| 168 |
&ref_clk { |
| 169 |
clock-frequency = <24000000>; |
| 170 |
}; |
| 171 |
|
| 172 |
&cpu { |
| 173 |
cpu-supply = <&cvdd>; |
| 174 |
}; |
| 175 |
|
| 176 |
/* |
| 177 |
* LCDK has a fixed CVDD of 1.3V, so only operating points >= 300MHz are |
| 178 |
* valid. Unfortunately due to a problem with the DA8XX OHCI controller, we |
| 179 |
* can't enable more than one OPP by default, since the controller sometimes |
| 180 |
* becomes unresponsive after a transition. Fix the frequency at 456 MHz. |
| 181 |
*/ |
| 182 |
|
| 183 |
&opp_100 { |
| 184 |
status = "disabled"; |
| 185 |
}; |
| 186 |
|
| 187 |
&opp_200 { |
| 188 |
status = "disabled"; |
| 189 |
}; |
| 190 |
|
| 191 |
&opp_300 { |
| 192 |
status = "disabled"; |
| 193 |
}; |
| 194 |
|
| 195 |
&opp_456 { |
| 196 |
status = "okay"; |
| 197 |
}; |
| 198 |
|
| 199 |
&pmx_core { |
| 200 |
status = "okay"; |
| 201 |
|
| 202 |
mcasp0_pins: mcasp0-pins { |
| 203 |
pinctrl-single,bits = < |
| 204 |
/* AHCLKX AFSX ACLKX */ |
| 205 |
0x00 0x00101010 0x00f0f0f0 |
| 206 |
/* ARX13 ARX14 */ |
| 207 |
0x04 0x00000110 0x00000ff0 |
| 208 |
>; |
| 209 |
}; |
| 210 |
|
| 211 |
nand_pins: nand-pins { |
| 212 |
pinctrl-single,bits = < |
| 213 |
/* EMA_WAIT[0], EMA_OE, EMA_WE, EMA_CS[3] */ |
| 214 |
0x1c 0x10110010 0xf0ff00f0 |
| 215 |
/* |
| 216 |
* EMA_D[0], EMA_D[1], EMA_D[2], |
| 217 |
* EMA_D[3], EMA_D[4], EMA_D[5], |
| 218 |
* EMA_D[6], EMA_D[7] |
| 219 |
*/ |
| 220 |
0x24 0x11111111 0xffffffff |
| 221 |
/* |
| 222 |
* EMA_D[8], EMA_D[9], EMA_D[10], |
| 223 |
* EMA_D[11], EMA_D[12], EMA_D[13], |
| 224 |
* EMA_D[14], EMA_D[15] |
| 225 |
*/ |
| 226 |
0x20 0x11111111 0xffffffff |
| 227 |
/* EMA_A[1], EMA_A[2] */ |
| 228 |
0x30 0x01100000 0x0ff00000 |
| 229 |
>; |
| 230 |
}; |
| 231 |
}; |
| 232 |
|
| 233 |
&serial2 { |
| 234 |
pinctrl-names = "default"; |
| 235 |
pinctrl-0 = <&serial2_rxtx_pins>; |
| 236 |
status = "okay"; |
| 237 |
}; |
| 238 |
|
| 239 |
&wdt { |
| 240 |
status = "okay"; |
| 241 |
}; |
| 242 |
|
| 243 |
&rtc0 { |
| 244 |
status = "okay"; |
| 245 |
}; |
| 246 |
|
| 247 |
&gpio { |
| 248 |
status = "okay"; |
| 249 |
}; |
| 250 |
|
| 251 |
&sata_refclk { |
| 252 |
status = "okay"; |
| 253 |
clock-frequency = <100000000>; |
| 254 |
}; |
| 255 |
|
| 256 |
&sata { |
| 257 |
status = "okay"; |
| 258 |
}; |
| 259 |
|
| 260 |
&mdio { |
| 261 |
pinctrl-names = "default"; |
| 262 |
pinctrl-0 = <&mdio_pins>; |
| 263 |
bus_freq = <2200000>; |
| 264 |
status = "okay"; |
| 265 |
}; |
| 266 |
|
| 267 |
ð0 { |
| 268 |
pinctrl-names = "default"; |
| 269 |
pinctrl-0 = <&mii_pins>; |
| 270 |
status = "okay"; |
| 271 |
}; |
| 272 |
|
| 273 |
&mmc0 { |
| 274 |
max-frequency = <50000000>; |
| 275 |
bus-width = <4>; |
| 276 |
pinctrl-names = "default"; |
| 277 |
pinctrl-0 = <&mmc0_pins>; |
| 278 |
cd-gpios = <&gpio 64 GPIO_ACTIVE_LOW>; |
| 279 |
status = "okay"; |
| 280 |
}; |
| 281 |
|
| 282 |
&i2c0 { |
| 283 |
pinctrl-names = "default"; |
| 284 |
pinctrl-0 = <&i2c0_pins>; |
| 285 |
clock-frequency = <100000>; |
| 286 |
status = "okay"; |
| 287 |
|
| 288 |
tlv320aic3106: tlv320aic3106@18 { |
| 289 |
#sound-dai-cells = <0>; |
| 290 |
compatible = "ti,tlv320aic3106"; |
| 291 |
reg = <0x18>; |
| 292 |
adc-settle-ms = <40>; |
| 293 |
ai3x-micbias-vg = <1>; /* 2.0V */ |
| 294 |
status = "okay"; |
| 295 |
|
| 296 |
/* Regulators */ |
| 297 |
IOVDD-supply = <&vcc_3v3d>; |
| 298 |
AVDD-supply = <&vcc_3v3d>; |
| 299 |
DRVDD-supply = <&vcc_3v3d>; |
| 300 |
DVDD-supply = <&vcc_1v8d>; |
| 301 |
}; |
| 302 |
}; |
| 303 |
|
| 304 |
&mcasp0 { |
| 305 |
#sound-dai-cells = <0>; |
| 306 |
pinctrl-names = "default"; |
| 307 |
pinctrl-0 = <&mcasp0_pins>; |
| 308 |
status = "okay"; |
| 309 |
|
| 310 |
op-mode = <0>; /* DAVINCI_MCASP_IIS_MODE */ |
| 311 |
tdm-slots = <2>; |
| 312 |
serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ |
| 313 |
0 0 0 0 |
| 314 |
0 0 0 0 |
| 315 |
0 0 0 0 |
| 316 |
0 1 2 0 |
| 317 |
>; |
| 318 |
tx-num-evt = <32>; |
| 319 |
rx-num-evt = <32>; |
| 320 |
}; |
| 321 |
|
| 322 |
&usb_phy { |
| 323 |
status = "okay"; |
| 324 |
}; |
| 325 |
|
| 326 |
&usb0 { |
| 327 |
status = "okay"; |
| 328 |
}; |
| 329 |
|
| 330 |
&usb1 { |
| 331 |
status = "okay"; |
| 332 |
}; |
| 333 |
|
| 334 |
&aemif { |
| 335 |
pinctrl-names = "default"; |
| 336 |
pinctrl-0 = <&nand_pins>; |
| 337 |
status = "okay"; |
| 338 |
cs3 { |
| 339 |
#address-cells = <2>; |
| 340 |
#size-cells = <1>; |
| 341 |
clock-ranges; |
| 342 |
ranges; |
| 343 |
|
| 344 |
ti,cs-chipselect = <3>; |
| 345 |
|
| 346 |
nand@2000000,0 { |
| 347 |
compatible = "ti,davinci-nand"; |
| 348 |
#address-cells = <1>; |
| 349 |
#size-cells = <1>; |
| 350 |
reg = <0 0x02000000 0x02000000 |
| 351 |
1 0x00000000 0x00008000>; |
| 352 |
|
| 353 |
ti,davinci-chipselect = <1>; |
| 354 |
ti,davinci-mask-ale = <0>; |
| 355 |
ti,davinci-mask-cle = <0>; |
| 356 |
ti,davinci-mask-chipsel = <0>; |
| 357 |
|
| 358 |
ti,davinci-nand-buswidth = <16>; |
| 359 |
ti,davinci-ecc-mode = "hw"; |
| 360 |
ti,davinci-ecc-bits = <4>; |
| 361 |
ti,davinci-nand-use-bbt; |
| 362 |
|
| 363 |
/* |
| 364 |
* The OMAP-L132/L138 Bootloader doc SPRAB41E reads: |
| 365 |
* "To boot from NAND Flash, the AIS should be written |
| 366 |
* to NAND block 1 (NAND block 0 is not used by default)". |
| 367 |
* The same doc mentions that for ROM "Silicon Revision 2.1", |
| 368 |
* "Updated NAND boot mode to offer boot from block 0 or block 1". |
| 369 |
* However the limitaion is left here by default for compatibility |
| 370 |
* with older silicon and because it needs new boot pin settings |
| 371 |
* not possible in stock LCDK. |
| 372 |
*/ |
| 373 |
partitions { |
| 374 |
compatible = "fixed-partitions"; |
| 375 |
#address-cells = <1>; |
| 376 |
#size-cells = <1>; |
| 377 |
|
| 378 |
partition@0 { |
| 379 |
label = "u-boot env"; |
| 380 |
reg = <0 0x020000>; |
| 381 |
}; |
| 382 |
partition@20000 { |
| 383 |
/* The LCDK defaults to booting from this partition */ |
| 384 |
label = "u-boot"; |
| 385 |
reg = <0x020000 0x080000>; |
| 386 |
}; |
| 387 |
partition@a0000 { |
| 388 |
label = "free space"; |
| 389 |
reg = <0x0a0000 0>; |
| 390 |
}; |
| 391 |
}; |
| 392 |
}; |
| 393 |
}; |
| 394 |
}; |
| 395 |
|
| 396 |
&prictrl { |
| 397 |
status = "okay"; |
| 398 |
}; |
| 399 |
|
| 400 |
&memctrl { |
| 401 |
status = "okay"; |
| 402 |
}; |
| 403 |
|
| 404 |
&lcdc { |
| 405 |
status = "okay"; |
| 406 |
pinctrl-names = "default"; |
| 407 |
pinctrl-0 = <&lcd_pins>; |
| 408 |
|
| 409 |
port { |
| 410 |
lcdc_out_vga: endpoint { |
| 411 |
remote-endpoint = <&vga_bridge_in>; |
| 412 |
}; |
| 413 |
}; |
| 414 |
}; |
| 415 |
|
| 416 |
&vpif { |
| 417 |
pinctrl-names = "default"; |
| 418 |
pinctrl-0 = <&vpif_capture_pins>; |
| 419 |
status = "okay"; |
| 420 |
}; |
| 421 |
|
| 422 |
&dsp { |
| 423 |
memory-region = <&dsp_memory_region>; |
| 424 |
status = "okay"; |
| 425 |
}; |