| 1 |
// SPDX-License-Identifier: (GPL-2.0 OR MIT) |
| 2 |
/* |
| 3 |
* Copyright (C) 2014 Antoine Ténart <[email protected]> |
| 4 |
*/ |
| 5 |
|
| 6 |
/dts-v1/; |
| 7 |
|
| 8 |
#include <dt-bindings/gpio/gpio.h> |
| 9 |
#include "berlin2q.dtsi" |
| 10 |
|
| 11 |
/ { |
| 12 |
model = "Marvell BG2-Q DMP"; |
| 13 |
compatible = "marvell,berlin2q-dmp", "marvell,berlin2q", "marvell,berlin"; |
| 14 |
|
| 15 |
memory@0 { |
| 16 |
device_type = "memory"; |
| 17 |
reg = <0x00000000 0x80000000>; |
| 18 |
}; |
| 19 |
|
| 20 |
chosen { |
| 21 |
bootargs = "earlyprintk"; |
| 22 |
stdout-path = "serial0:115200n8"; |
| 23 |
}; |
| 24 |
|
| 25 |
regulators { |
| 26 |
compatible = "simple-bus"; |
| 27 |
#address-cells = <1>; |
| 28 |
#size-cells = <0>; |
| 29 |
|
| 30 |
reg_usb0_vbus: regulator_usb0 { |
| 31 |
compatible = "regulator-fixed"; |
| 32 |
regulator-name = "usb0_vbus"; |
| 33 |
regulator-min-microvolt = <5000000>; |
| 34 |
regulator-max-microvolt = <5000000>; |
| 35 |
gpio = <&portb 8 GPIO_ACTIVE_HIGH>; |
| 36 |
enable-active-high; |
| 37 |
}; |
| 38 |
|
| 39 |
reg_usb1_vbus: regulator_usb1 { |
| 40 |
compatible = "regulator-fixed"; |
| 41 |
regulator-name = "usb1_vbus"; |
| 42 |
regulator-min-microvolt = <5000000>; |
| 43 |
regulator-max-microvolt = <5000000>; |
| 44 |
gpio = <&portb 10 GPIO_ACTIVE_HIGH>; |
| 45 |
enable-active-high; |
| 46 |
}; |
| 47 |
|
| 48 |
reg_usb2_vbus: regulator_usb2 { |
| 49 |
compatible = "regulator-fixed"; |
| 50 |
regulator-name = "usb2_vbus"; |
| 51 |
regulator-min-microvolt = <5000000>; |
| 52 |
regulator-max-microvolt = <5000000>; |
| 53 |
gpio = <&portb 12 GPIO_ACTIVE_HIGH>; |
| 54 |
enable-active-high; |
| 55 |
}; |
| 56 |
|
| 57 |
reg_sdio1_vmmc: regulator_sdio1_vmmc { |
| 58 |
compatible = "regulator-fixed"; |
| 59 |
regulator-min-microvolt = <3300000>; |
| 60 |
regulator-max-microvolt = <3300000>; |
| 61 |
regulator-name = "sdio1_vmmc"; |
| 62 |
enable-active-high; |
| 63 |
regulator-boot-on; |
| 64 |
gpio = <&portb 21 GPIO_ACTIVE_HIGH>; |
| 65 |
}; |
| 66 |
|
| 67 |
reg_sdio1_vqmmc: regulator_sido1_vqmmc { |
| 68 |
compatible = "regulator-gpio"; |
| 69 |
regulator-min-microvolt = <1800000>; |
| 70 |
regulator-max-microvolt = <3300000>; |
| 71 |
regulator-name = "sdio1_vqmmc"; |
| 72 |
regulator-type = "voltage"; |
| 73 |
enable-active-high; |
| 74 |
gpios = <&portb 16 GPIO_ACTIVE_HIGH>; |
| 75 |
states = <3300000 0x1 |
| 76 |
1800000 0x0>; |
| 77 |
}; |
| 78 |
}; |
| 79 |
}; |
| 80 |
|
| 81 |
&soc_pinctrl { |
| 82 |
sd1gpio_pmux: sd1pwr-pmux { |
| 83 |
groups = "G23", "G32"; |
| 84 |
function = "gpio"; |
| 85 |
}; |
| 86 |
}; |
| 87 |
|
| 88 |
&sdhci1 { |
| 89 |
vmmc-supply = <®_sdio1_vmmc>; |
| 90 |
vqmmc-supply = <®_sdio1_vqmmc>; |
| 91 |
cd-gpios = <&portc 30 GPIO_ACTIVE_LOW>; |
| 92 |
wp-gpios = <&portd 0 GPIO_ACTIVE_HIGH>; |
| 93 |
pinctrl-0 = <&sd1gpio_pmux>, <&sd1_pmux>; |
| 94 |
pinctrl-names = "default"; |
| 95 |
status = "okay"; |
| 96 |
}; |
| 97 |
|
| 98 |
&sdhci2 { |
| 99 |
bus-width = <8>; |
| 100 |
non-removable; |
| 101 |
status = "okay"; |
| 102 |
}; |
| 103 |
|
| 104 |
&i2c0 { |
| 105 |
status = "okay"; |
| 106 |
}; |
| 107 |
|
| 108 |
&i2c2 { |
| 109 |
status = "okay"; |
| 110 |
}; |
| 111 |
|
| 112 |
&uart0 { |
| 113 |
status = "okay"; |
| 114 |
}; |
| 115 |
|
| 116 |
&usb_phy0 { |
| 117 |
status = "okay"; |
| 118 |
}; |
| 119 |
|
| 120 |
&usb_phy2 { |
| 121 |
status = "okay"; |
| 122 |
}; |
| 123 |
|
| 124 |
&usb0 { |
| 125 |
vbus-supply = <®_usb0_vbus>; |
| 126 |
status = "okay"; |
| 127 |
}; |
| 128 |
|
| 129 |
&usb2 { |
| 130 |
vbus-supply = <®_usb2_vbus>; |
| 131 |
status = "okay"; |
| 132 |
}; |
| 133 |
|
| 134 |
ð0 { |
| 135 |
status = "okay"; |
| 136 |
}; |
| 137 |
|
| 138 |
&sata0 { |
| 139 |
status = "okay"; |
| 140 |
}; |
| 141 |
|
| 142 |
&sata_phy { |
| 143 |
status = "okay"; |
| 144 |
}; |